path: root/MIBS/riedo/NETTRACK-E3METER-SNMP-MIB

NETTRACK-E3METER-SNMP-MIB DEFINITIONS ::= BEGIN

IMPORTS
	MODULE-IDENTITY,
	OBJECT-TYPE,
	Integer32,
	enterprises
		FROM SNMPv2-SMI
	TEXTUAL-CONVENTION,
	TruthValue
		FROM SNMPv2-TC
	;

nettrack OBJECT IDENTIFIER
	::= { enterprises 21695 }

public OBJECT IDENTIFIER
	::= { nettrack 1 }

e3Mib
	MODULE-IDENTITY
	LAST-UPDATED	"201810090000Z"
	ORGANIZATION	"net-track GmbH"
	CONTACT-INFO	"net-track GmbH
			Duensstrasse 1
			3186 Duedingen
			Switzerland
			www.net-track.ch"
	DESCRIPTION	"Management Information for E3METER IPM products
			www.e3meter.com"
	REVISION        "201810090000Z"
        DESCRIPTION     "Added RCM traps."
	REVISION        "201810080000Z"
        DESCRIPTION     "Added RCM-related stuff."
	REVISION	"201604180000Z"
	DESCRIPTION	"Added e3IpmAlarmTable."
	REVISION	"201602030000Z"
	DESCRIPTION	"Added traps."
	REVISION	"201204120000Z"
	DESCRIPTION	"Added import of TEXTUAL-CONVENTION."
	REVISION	"201111020000Z"
	DESCRIPTION	"Added channel type and channel groups."
	REVISION	"201108190000Z"
	DESCRIPTION	"Added e3IpmChannelName."
	REVISION	"201101260000Z"
	DESCRIPTION	"Corrected some syntax errors for very picky parsers."
	REVISION	"201012060000Z"
	DESCRIPTION	"Added sensor data."
	REVISION	"201010200000Z"
	DESCRIPTION	"Initial version of this MIB module."
	::= { public 10 }

e3Ipm OBJECT IDENTIFIER
	::= { e3Mib 7 }

-- ===========================================================================
-- Textual conventions
--

Watts ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Watts"
	SYNTAX		INTEGER

VoltAmpereReactives ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Volt-ampere reactives"
	SYNTAX		Integer32

VoltAmperes ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Volt-amperes"
	SYNTAX		Integer32

WattHours ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Watt hours"
	SYNTAX		Integer32

VoltAmpereReactiveHours ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Volt-ampere reactive hours"
	SYNTAX		Integer32

VoltAmpereHours ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Volt-ampere hours"
	SYNTAX		Integer32

MilliAmperes ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Milli-amperes"
	SYNTAX		Integer32

MilliVolts ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Milli-volts"
	SYNTAX		Integer32

MilliHertz ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Milli-hertz"
	SYNTAX		Integer32

DeciDegreesCelsius ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Deci-degrees celsius"
        SYNTAX		Integer32

Permil ::= TEXTUAL-CONVENTION
    	STATUS		current
	DESCRIPTION
	    	"Per mil"
        SYNTAX		INTEGER

-- ===========================================================================
-- Agent information
--

e3IpmInfo OBJECT IDENTIFIER
	::= { e3Ipm 1 }

e3IpmInfoSerial OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Serial number."
	::= { e3IpmInfo 1 }

e3IpmInfoModel OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Model number."
	::= { e3IpmInfo 2 }

e3IpmInfoHWVersion OBJECT-TYPE
	SYNTAX		INTEGER {
		rev-a (0),
		rev-b (1)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Hardware revision."
	::= { e3IpmInfo 3 }

e3IpmInfoFWVersion OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Integer representation of the firmware revision
		(major.minor) represented as a 16 bit integer."
	::= { e3IpmInfo 4 }

e3IpmInfoMeters OBJECT-TYPE
	SYNTAX		INTEGER
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of power meters in this IPS."
	::= { e3IpmInfo 5 }

-- ===========================================================================
-- IPM meters
--

e3IpmMeterTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF E3IpmMeterEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"The e3IpmMeterTable holds information related to the
		powermeters of all IPS nodes."
	::= { e3Ipm 2 }

e3IpmMeterEntry OBJECT-TYPE
	SYNTAX		E3IpmMeterEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds the information related to one specific powermeter."
	INDEX		{ e3IpmMeter }
	::=		{ e3IpmMeterTable 1 }

E3IpmMeterEntry ::= SEQUENCE {
		e3IpmMeter	 Integer32,
		e3IpmEnergyP	 WattHours,
		e3IpmEnergyQ	 VoltAmpereReactiveHours,
		e3IpmEnergyS	 VoltAmpereHours,
		e3IpmPowerP	 Watts,
		e3IpmPowerQ	 VoltAmpereReactives,
		e3IpmPowerS	 VoltAmperes,
		e3IpmUrms        MilliVolts,
		e3IpmIrms        MilliAmperes,
		e3IpmFrequency   MilliHertz,
		e3IpmChannelName OCTET STRING,
		e3IpmChannelType INTEGER
	}

e3IpmMeter OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Number of the powermeter of this IPS."
	::= { e3IpmMeterEntry 1 }

e3IpmEnergyP OBJECT-TYPE
	SYNTAX		WattHours
	UNITS		"Wh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Active energy in watt hours."
	::= { e3IpmMeterEntry 2 }

e3IpmEnergyQ OBJECT-TYPE
	SYNTAX		VoltAmpereReactiveHours
	UNITS		"varh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Reactive energy in volt-ampere reactives hours."
	::= { e3IpmMeterEntry 3 }

e3IpmEnergyS OBJECT-TYPE
	SYNTAX		VoltAmpereHours
	UNITS		"VAh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Apparent energy in volt-ampere hours."
	::= { e3IpmMeterEntry 4 }

e3IpmPowerP OBJECT-TYPE
	SYNTAX		Watts
	UNITS		"W"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Active power at a given instant."
	::= { e3IpmMeterEntry 5 }

e3IpmPowerQ OBJECT-TYPE
	SYNTAX		VoltAmpereReactives
	UNITS		"var"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Reactive power at a given instant."
	::= { e3IpmMeterEntry 6 }

e3IpmPowerS OBJECT-TYPE
	SYNTAX		VoltAmperes
	UNITS		"VA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Apparent power at a given instant."
	::= { e3IpmMeterEntry 7 }

e3IpmUrms OBJECT-TYPE
	SYNTAX		MilliVolts
	UNITS		"mV"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"RMS voltage at a given instant."
	::= { e3IpmMeterEntry 8 }

e3IpmIrms OBJECT-TYPE
	SYNTAX		MilliAmperes
	UNITS		"mA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"RMS current at a given instant."
	::= { e3IpmMeterEntry 9 }

e3IpmFrequency OBJECT-TYPE
	SYNTAX		MilliHertz
	UNITS		"mHz"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Frequency measured a given instant."
	::= { e3IpmMeterEntry 10 }

e3IpmChannelName OBJECT-TYPE
        SYNTAX		OCTET STRING (SIZE(0..15))
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
	    	"Channel name."
        ::= { e3IpmMeterEntry 11 }

e3IpmChannelType OBJECT-TYPE
        SYNTAX		INTEGER {
		live-wire (0),
		neutral-wire (1)
        }
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel type: For neutral wire channels, only I_rms will
		contain meaningful values."
	::= { e3IpmMeterEntry 12 }

-- ===========================================================================
-- IPM sensors
--

e3IpmSensorTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF E3IpmSensorEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"The e3IpmSensorTable holds information related to the
		sensor of this IPM."
	::= { e3Ipm 3 }

e3IpmSensorEntry OBJECT-TYPE
	SYNTAX		E3IpmSensorEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds the information related to one specific sensor."
	INDEX		{ e3IpmSensor }
	::=		{ e3IpmSensorTable 1 }

E3IpmSensorEntry ::= SEQUENCE {
		e3IpmSensor		Integer32,
		e3IpmSensorType		INTEGER,
		e3IpmSensorVersion	OCTET STRING,
		e3IpmSensorTemperatureCelsius	DeciDegreesCelsius,
		e3IpmSensorHumidity	Permil
	}

e3IpmSensor OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Sensor port number."
	::= { e3IpmSensorEntry 1 }

e3IpmSensorType OBJECT-TYPE
        SYNTAX		INTEGER {
		none (0),
		temp (1),
		temp-humidity (2)
        }
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Sensor type."
	::= { e3IpmSensorEntry 2 }

e3IpmSensorVersion OBJECT-TYPE
        SYNTAX		OCTET STRING (SIZE(0..15))
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
	    	"Sensor version."
        ::= { e3IpmSensorEntry 3 }

e3IpmSensorTemperatureCelsius OBJECT-TYPE
        SYNTAX          DeciDegreesCelsius
        UNITS           "deg-C/10"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Temperature in tenth degrees."
        ::= { e3IpmSensorEntry 4 }

e3IpmSensorHumidity OBJECT-TYPE
        SYNTAX          Permil
        UNITS           "/1000"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Relative humidity in per mil."
        ::= { e3IpmSensorEntry 5 }

-- ===========================================================================
-- IPM predefined channel groups
--

e3IpmPGroupTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF E3IpmPGroupEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"The e3IpmPGroupTable holds information related to predefined
		channel groups."
	::= { e3Ipm 4 }

e3IpmPGroupEntry OBJECT-TYPE
	SYNTAX		E3IpmPGroupEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds the information related to one specific group."
	INDEX		{ e3IpmPGroup }
	::=		{ e3IpmPGroupTable 1 }

E3IpmPGroupEntry ::= SEQUENCE {
		e3IpmPGroup	 Integer32,
		e3IpmPGName	 OCTET STRING,
		e3IpmPGMembers	 Integer32,
		e3IpmPGEnergyP	 WattHours,
		e3IpmPGEnergyQ	 VoltAmpereReactiveHours,
		e3IpmPGEnergyS	 VoltAmpereHours,
		e3IpmPGPowerP	 Watts,
		e3IpmPGPowerQ	 VoltAmpereReactives,
		e3IpmPGPowerS	 VoltAmperes,
		e3IpmPGIrms      MilliAmperes
	}

e3IpmPGroup OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Predefined channel group number."
	::= { e3IpmPGroupEntry 1 }

e3IpmPGName OBJECT-TYPE
        SYNTAX		OCTET STRING (SIZE(0..15))
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
	    	"Channel group name."
        ::= { e3IpmPGroupEntry 2 }

e3IpmPGMembers OBJECT-TYPE
        SYNTAX		Integer32
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
	    	"A bit set specifying the channels which are
		members of this channel group. If bit 0 is set,
		this means that channel CH1 is member of this
		group. Bit 1 stands for CH2 and so on."
        ::= { e3IpmPGroupEntry 3 }

e3IpmPGEnergyP OBJECT-TYPE
	SYNTAX		WattHours
	UNITS		"Wh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group active energy in watt hours."
	::= { e3IpmPGroupEntry 4 }

e3IpmPGEnergyQ OBJECT-TYPE
	SYNTAX		VoltAmpereReactiveHours
	UNITS		"varh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group reactive energy in volt-ampere reactives hours."
	::= { e3IpmPGroupEntry 5 }

e3IpmPGEnergyS OBJECT-TYPE
	SYNTAX		VoltAmpereHours
	UNITS		"VAh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group apparent energy in volt-ampere hours."
	::= { e3IpmPGroupEntry 6 }

e3IpmPGPowerP OBJECT-TYPE
	SYNTAX		Watts
	UNITS		"W"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group active power at a given instant."
	::= { e3IpmPGroupEntry 7 }

e3IpmPGPowerQ OBJECT-TYPE
	SYNTAX		VoltAmpereReactives
	UNITS		"var"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group reactive power at a given instant."
	::= { e3IpmPGroupEntry 8 }

e3IpmPGPowerS OBJECT-TYPE
	SYNTAX		VoltAmperes
	UNITS		"VA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group apparent power at a given instant."
	::= { e3IpmPGroupEntry 9 }

e3IpmPGIrms OBJECT-TYPE
	SYNTAX		MilliAmperes
	UNITS		"mA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group RMS current at a given instant."
	::= { e3IpmPGroupEntry 10 }

-- ===========================================================================
-- IPM user defined channel groups
--

e3IpmUGroupTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF E3IpmUGroupEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"The e3IpmUGroupTable holds information related to user
		defined channel groups."
	::= { e3Ipm 5 }

e3IpmUGroupEntry OBJECT-TYPE
	SYNTAX		E3IpmUGroupEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds the information related to one specific group."
	INDEX		{ e3IpmUGroup }
	::=		{ e3IpmUGroupTable 1 }

E3IpmUGroupEntry ::= SEQUENCE {
		e3IpmUGroup	 Integer32,
		e3IpmUGName	 OCTET STRING,
		e3IpmUGMembers	 Integer32,
		e3IpmUGEnergyP	 WattHours,
		e3IpmUGEnergyQ	 VoltAmpereReactiveHours,
		e3IpmUGEnergyS	 VoltAmpereHours,
		e3IpmUGPowerP	 Watts,
		e3IpmUGPowerQ	 VoltAmpereReactives,
		e3IpmUGPowerS	 VoltAmperes,
		e3IpmUGIrms      MilliAmperes
	}

e3IpmUGroup OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"User defined channel group number."
	::= { e3IpmUGroupEntry 1 }

e3IpmUGName OBJECT-TYPE
        SYNTAX		OCTET STRING (SIZE(0..15))
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
	    	"Channel group name."
        ::= { e3IpmUGroupEntry 2 }

e3IpmUGMembers OBJECT-TYPE
        SYNTAX		Integer32
        MAX-ACCESS	read-only
        STATUS		current
        DESCRIPTION
	    	"A bit set specifying the channels which are
		members of this channel group. If bit 0 is set,
		this means that channel CH1 is member of this
		group. Bit 1 stands for CH2 and so on. If no
		members are configured, the group is inactive."
        ::= { e3IpmUGroupEntry 3 }

e3IpmUGEnergyP OBJECT-TYPE
	SYNTAX		WattHours
	UNITS		"Wh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group active energy in watt hours."
	::= { e3IpmUGroupEntry 4 }

e3IpmUGEnergyQ OBJECT-TYPE
	SYNTAX		VoltAmpereReactiveHours
	UNITS		"varh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group reactive energy in volt-ampere reactives hours."
	::= { e3IpmUGroupEntry 5 }

e3IpmUGEnergyS OBJECT-TYPE
	SYNTAX		VoltAmpereHours
	UNITS		"VAh"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group apparent energy in volt-ampere hours."
	::= { e3IpmUGroupEntry 6 }

e3IpmUGPowerP OBJECT-TYPE
	SYNTAX		Watts
	UNITS		"W"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group active power at a given instant."
	::= { e3IpmUGroupEntry 7 }

e3IpmUGPowerQ OBJECT-TYPE
	SYNTAX		VoltAmpereReactives
	UNITS		"var"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group reactive power at a given instant."
	::= { e3IpmUGroupEntry 8 }

e3IpmUGPowerS OBJECT-TYPE
	SYNTAX		VoltAmperes
	UNITS		"VA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group apparent power at a given instant."
	::= { e3IpmUGroupEntry 9 }

e3IpmUGIrms OBJECT-TYPE
	SYNTAX		MilliAmperes
	UNITS		"mA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Channel group RMS current at a given instant."
	::= { e3IpmUGroupEntry 10 }

-- ===========================================================================
-- IPM Alarm Settings
--

e3IpmAlarmTable OBJECT-TYPE
	SYNTAX		SEQUENCE OF E3IpmAlarmTableEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds alarm settings."
	::= { e3Ipm 6 }

e3IpmAlarmTableEntry OBJECT-TYPE
	SYNTAX		E3IpmAlarmTableEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"Holds alarm settings for one specific measured value."
	INDEX		{ e3IpmAlarmIndex }
	::=		{ e3IpmAlarmTable 1 }

E3IpmAlarmTableEntry ::= SEQUENCE {
		e3IpmAlarmIndex		INTEGER,
		e3IpmAlarmState		INTEGER,
		e3IpmAlarmCritLowSet	TruthValue,
		e3IpmAlarmCritLow	Integer32,
		e3IpmAlarmWarnLowSet	TruthValue,
		e3IpmAlarmWarnLow	Integer32,
		e3IpmAlarmWarnHighSet	TruthValue,
		e3IpmAlarmWarnHigh	Integer32,
		e3IpmAlarmCritHighSet	TruthValue,
		e3IpmAlarmCritHigh	Integer32
	}

e3IpmAlarmIndex OBJECT-TYPE
	SYNTAX		INTEGER {
		current-l1 (0),
		current-l2 (1),
		current-l3 (2),
		current-n (3),
		temp-int (4),
		temp-ext1 (5),
		temp-ext2 (6),
		rh-ext1 (7),
		rh-ext2 (8)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Defines the alarm described by the current entry. There
		are alarms for the current of all phases, for the
		temperature and the relative humidity."
	::= { e3IpmAlarmTableEntry 1 }

e3IpmAlarmState OBJECT-TYPE
	SYNTAX		INTEGER {
		critical-low (0),
		warn-low (1),
		normal (2),
		warn-high (3),
		critical-high (4),
		unknown (5)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Shows this alarm entries' state. If no alarm settings
		are defined, the state is unknown."
	::= { e3IpmAlarmTableEntry 2 }

e3IpmAlarmCritLowSet OBJECT-TYPE
	SYNTAX		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"True if a 'critical low' alarm level for the current
		entry is defined, false otherwise."
	::= { e3IpmAlarmTableEntry 3 }

e3IpmAlarmCritLow OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The 'critical low' alarm level for the current entry
		in hundredths of the relevant unit (i.e. amperes, degrees
		celsius and %RH). If no alarm level is configured, this
		reads 0."
	::= { e3IpmAlarmTableEntry 4 }

e3IpmAlarmWarnLowSet OBJECT-TYPE
	SYNTAX		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"True if a 'warn low' alarm level for the current
		entry is defined, false otherwise."
	::= { e3IpmAlarmTableEntry 5 }

e3IpmAlarmWarnLow OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The 'warn low' alarm level for the current entry
		in hundredths of the relevant unit (i.e. amperes, degrees
		celsius and %RH). If no alarm level is configured, this
		reads 0."
	::= { e3IpmAlarmTableEntry 6 }

e3IpmAlarmWarnHighSet OBJECT-TYPE
	SYNTAX		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"True if a 'warn high' alarm level for the current
		entry is defined, false otherwise."
	::= { e3IpmAlarmTableEntry 7 }

e3IpmAlarmWarnHigh OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The 'warn high' alarm level for the current entry
		in hundredths of the relevant unit (i.e. amperes, degrees
		celsius and %RH). If no alarm level is configured, this
		reads 0."
	::= { e3IpmAlarmTableEntry 8 }

e3IpmAlarmCritHighSet OBJECT-TYPE
	SYNTAX		TruthValue
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"True if a 'critical high' alarm level for the current
		entry is defined, false otherwise."
	::= { e3IpmAlarmTableEntry 9 }

e3IpmAlarmCritHigh OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The 'critical high' alarm level for the current entry
		in hundredths of the relevant unit (i.e. amperes, degrees
		celsius and %RH). If no alarm level is configured, this
		reads 0."
	::= { e3IpmAlarmTableEntry 10 }

-- ===========================================================================
-- IPM RCM Data
--

e3IpmRcmTable OBJECT-TYPE
	SYNTAX		Integer32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Table holding all residual current monitoring (RCM)
		data of this IPS."
	::= { e3Ipm 7 }

e3IpmRcmTableEntry OBJECT-TYPE
	SYNTAX		E3IpmRcmTableEntry
	MAX-ACCESS	not-accessible
	STATUS		current
	DESCRIPTION
		"One entry in the RCM table."
	INDEX		{ e3IpmRcmChannel }
	::=		{ e3IpmRcmTable 1 }

E3IpmRcmTableEntry ::= SEQUENCE {
		e3IpmRcmChannel		Integer32,
		e3IpmRcmAcLimit		MilliAmperes,
		e3IpmRcmDcLimit		MilliAmperes,
		e3IpmRcmStatus		Integer32,
		e3IpmRcmAc		MilliAmperes,
		e3IpmRcmDc		MilliAmperes
	}

e3IpmRcmChannel OBJECT-TYPE
	SYNTAX		INTEGER {
		total(0)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"RCM channel: 0 (total) is the total of all phases in this IPS."
	::= { e3IpmRcmTableEntry 1 }

e3IpmRcmAcLimit OBJECT-TYPE
	SYNTAX		MilliAmperes
	UNITS		"mA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The factory configured AC RCM limit. Any measurement
		higher than this limit is considered a critical problem."
	::= { e3IpmRcmTableEntry 2 }

e3IpmRcmDcLimit OBJECT-TYPE
	SYNTAX		MilliAmperes
	UNITS		"mA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The factory configured DC RCM limit. Any measurement
		higher than this limit is considered a critical problem."
	::= { e3IpmRcmTableEntry 3 }

e3IpmRcmStatus OBJECT-TYPE
	SYNTAX		INTEGER {
		unknown(0),
		valid(1)
	}
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"Status of the RcmAc/RcmDc data. If the residual
		current cannot be measured, 0 (unknown) is signalled
		here, otherwise 1 (valid)."
	::= { e3IpmRcmTableEntry 4 }

e3IpmRcmAc OBJECT-TYPE
	SYNTAX		MilliAmperes
	UNITS		"mA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The latest AC RCM measurement."
	::= { e3IpmRcmTableEntry 5 }

e3IpmRcmDc OBJECT-TYPE
	SYNTAX		MilliAmperes
	UNITS		"mA"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The latest DC RCM measurement."
	::= { e3IpmRcmTableEntry 6 }

-- ===========================================================================
-- IPM Traps
--

e3IpmTraps OBJECT IDENTIFIER
	::= { e3Mib 8 }

-- Current

e3IpmCurrentCritLow NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmMeter, e3IpmIrms }
	STATUS current
	DESCRIPTION
		"The e3IpmCurrentCritLow is triggered when the current
		on the given channel is less than or equal to the configured
		critical low threshold."
	::= { e3IpmTraps 1 }

e3IpmCurrentWarnLow NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmMeter, e3IpmIrms }
	STATUS current
	DESCRIPTION
		"The e3IpmCurrentWarnLow is triggered when the current
		on the given channel is less than or equal to the configured
		warn low threshold."
	::= { e3IpmTraps 2 }

e3IpmCurrentNormal NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmMeter, e3IpmIrms }
	STATUS current
	DESCRIPTION
		"The e3IpmCurrentNormal is triggered when the current
		on the given channel is not outside any configured
		limits."
	::= { e3IpmTraps 3 }

e3IpmCurrentWarnHigh NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmMeter, e3IpmIrms }
	STATUS current
	DESCRIPTION
		"The e3IpmCurrentWarnHigh is triggered when the current
		on the given channel is greater than or equal to the
		configured warn high threshold."
	::= { e3IpmTraps 4 }

e3IpmCurrentCritHigh NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmMeter, e3IpmIrms  }
	STATUS current
	DESCRIPTION
		"The e3IpmCurrentCritHigh is triggered when the current
		on the given channel is greater than or equal to the
		configured critical high threshold."
	::= { e3IpmTraps 5 }

-- Temperature

e3IpmTempCritLow NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorTemperatureCelsius }
	STATUS current
	DESCRIPTION
		"The e3IpmTempCritLow is triggered when the temperature
		on the given sensor is less than or equal to the configured
		critical low threshold."
	::= { e3IpmTraps 6 }

e3IpmTempWarnLow NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorTemperatureCelsius }
	STATUS current
	DESCRIPTION
		"The e3IpmTempWarnLow is triggered when the temperature
		on the given sensor is less than or equal to the configured
		warn low threshold."
	::= { e3IpmTraps 7 }

e3IpmTempNormal NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorTemperatureCelsius }
	STATUS current
	DESCRIPTION
		"The e3IpmTempNormal is triggered when the temperature
		on the given sensor is not outside any configured
		limits."
	::= { e3IpmTraps 8 }

e3IpmTempWarnHigh NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorTemperatureCelsius }
	STATUS current
	DESCRIPTION
		"The e3IpmTempWarnHigh is triggered when the temperature
		on the given sensor is greater than or equal to the
		configured warn high threshold."
	::= { e3IpmTraps 9 }

e3IpmTempCritHigh NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorTemperatureCelsius }
	STATUS current
	DESCRIPTION
		"The e3IpmTempCritHigh is triggered when the temperature
		on the given sensor is greater than or equal to the
		configured critical high threshold."
	::= { e3IpmTraps 10 }

-- Relative Humidity

e3IpmRHCritLow NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorHumidity }
	STATUS current
	DESCRIPTION
		"The e3IpmRHCritLow is triggered when the relative humidity
		on the given sensor is less than or equal to the configured
		critical low threshold."
	::= { e3IpmTraps 11 }

e3IpmRHWarnLow NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorHumidity }
	STATUS current
	DESCRIPTION
		"The e3IpmRHWarnLow is triggered when the relative humidity
		on the given sensor is less than or equal to the configured
		warn low threshold."
	::= { e3IpmTraps 12 }

e3IpmRHNormal NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorHumidity }
	STATUS current
	DESCRIPTION
		"The e3IpmRHNormal is triggered when the relative humidity
		on the given sensor is not outside any configured
		limits."
	::= { e3IpmTraps 13 }

e3IpmRHWarnHigh NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorHumidity }
	STATUS current
	DESCRIPTION
		"The e3IpmRHWarnHigh is triggered when the relative humidity
		on the given sensor is greater than or equal to the
		configured warn high threshold."
	::= { e3IpmTraps 14 }

e3IpmRHCritHigh NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmSensor, e3IpmSensorHumidity }
	STATUS current
	DESCRIPTION
		"The e3IpmRHCritHigh is triggered when the relative humidity
		on the given sensor is greater than or equal to the
		configured critical high threshold."
	::= { e3IpmTraps 15 }

-- RCM Alarms

e3IpmRcmAcNormal NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmRcmChannel, e3IpmRcmAc }
	STATUS current
	DESCRIPTION
		"The e3IpmRcmAcNormal is triggered when the AC part of
		the residual current falls below the
		factory-configured limit."
	::= { e3IpmTraps 16 }

e3IpmRcmAcCritHigh NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmRcmChannel, e3IpmRcmAc }
	STATUS current
	DESCRIPTION
		"The e3IpmRcmAcCritHigh is triggered when the AC part
		of the residual current is greater than the
		factory-configured limit."
	::= { e3IpmTraps 17 }

e3IpmRcmDcNormal NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmRcmChannel, e3IpmRcmDc }
	STATUS current
	DESCRIPTION
		"The e3IpmRcmDcNormal is triggered when the DC part of
		the residual current falls below the
		factory-configured limit."
	::= { e3IpmTraps 18 }

e3IpmRcmDcCritHigh NOTIFICATION-TYPE
	OBJECTS { e3IpmInfoSerial, e3IpmRcmChannel, e3IpmRcmDc }
	STATUS current
	DESCRIPTION
		"The e3IpmRcmDcCritHigh is triggered when the DC part
		of the residual current is greater than the
		factory-configured limit."
	::= { e3IpmTraps 19 }

END