path: root/MIBS/ruckus/RUCKUS-ZD-WLAN-CONFIG-MIB

--
-- Copyright 2010-2013 Ruckus Wireless, Inc. All rights reserved.
--
-- RUCKUS WIRELESS, INC. CONFIDENTIAL - 
-- This is an unpublished, proprietary work of Ruckus Wireless, Inc., and is 
-- fully protected under copyright and trade secret laws. You may not view, 
-- use, disclose, copy, or distribute this file or any information contained 
-- herein except pursuant to a valid license from Ruckus. 
--

RUCKUS-ZD-WLAN-CONFIG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    ruckusZDWLANModule
        FROM RUCKUS-ROOT-MIB
    DisplayString,
    MacAddress,
    RowStatus,
    TruthValue
        FROM SNMPv2-TC
    OBJECT-GROUP
        FROM SNMPv2-CONF
    ifIndex,
    InterfaceIndex
        FROM IF-MIB
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Integer32,
    Unsigned32,
    IpAddress
        FROM SNMPv2-SMI;

ruckusZDWLANConfigMIB MODULE-IDENTITY
    LAST-UPDATED "201010150800Z"
    ORGANIZATION "Ruckus Wireless, Inc."
    CONTACT-INFO
        "Ruckus Wireless, Inc.

        Postal:
        350 West Java Dr.
        Sunnyvale, CA 94089
        USA

        EMail: support@ruckuswireless.com

        Phone: +1-650-265-4200"
    DESCRIPTION
        "Ruckus ZD WLAN Configuration mib"
    ::= { ruckusZDWLANModule 2 }

ruckusZDWLANConfigObjects OBJECT IDENTIFIER     ::= { ruckusZDWLANConfigMIB 1 }

ruckusZDWLANConfig OBJECT IDENTIFIER    ::= { ruckusZDWLANConfigObjects 1 }


ruckusZDWLANConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RuckusZDWLANConfigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "ZD WLAN table."
    ::= { ruckusZDWLANConfig 1 }

ruckusZDWLANConfigEntry OBJECT-TYPE
    SYNTAX  RuckusZDWLANConfigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Specifies each ZD WLAN configuration entry."
    INDEX {
        ruckusZDWLANID }
    ::= { ruckusZDWLANConfigTable 1 }

RuckusZDWLANConfigEntry ::= SEQUENCE {
  ruckusZDWLANID								INTEGER,
  ruckusZDWLANConfigSSID						OCTET STRING,
  ruckusZDWLANConfigDescription         		DisplayString,
  ruckusZDWLANConfigName						OCTET STRING,
  ruckusZDWLANConfigWLANServiceType            	INTEGER,
  ruckusZDWLANConfigAuthentication      		INTEGER,
  ruckusZDWLANConfigEncryption          		INTEGER,
  ruckusZDWLANConfigWEPKeyIndex         		INTEGER,
  ruckusZDWLANConfigWEPKey              		OCTET STRING,
  ruckusZDWLANConfigWPACipherType				INTEGER,
  ruckusZDWLANConfigWPAKey              		OCTET STRING,
  ruckusZDWLANConfigAuthenticationServerID      INTEGER,
  ruckusZDWLANConfigWirelessClientIsolation     INTEGER,
  ruckusZDWLANConfigWirelessWhiteListID			INTEGER,
  ruckusZDWLANConfigZeroITActivation       		INTEGER,
  ruckusZDWLANConfigWLANHotspotID        		INTEGER,
  ruckusZDWLANConfigWLANServicePriority 		INTEGER,
  ruckusZDWLANConfigAccountingServerID      	INTEGER,
  ruckusZDWLANConfigAccountingUpdateInterval    INTEGER,
  ruckusZDWLANConfigUplinkRate          		OCTET STRING,
  ruckusZDWLANConfigDownlinkRate        		OCTET STRING,
  ruckusZDWLANConfigIGMPSnooping        		INTEGER,
  ruckusZDWLANConfigVlanID              		INTEGER,
  ruckusZDWLANConfigDynamicVLAN         		INTEGER,
  ruckusZDWLANConfigHideSSID            		TruthValue,
  ruckusZDWLANConfigTunnelMode        	        TruthValue,
  ruckusZDWLANConfigBackgroundScanning  		TruthValue,
  ruckusZDWLANConfigMaxClients     				INTEGER,
  ruckusZDWLANConfigWebAuthentication   		INTEGER,
  ruckusZDWLANConfigRowStatus           		RowStatus
}

ruckusZDWLANID OBJECT-TYPE
    SYNTAX  INTEGER (1..2048)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "this Wireless LAN(WLAN) ID.Max value:for zd1000 zd1100,128;for zd3000,1024;for 
        zd5000,2048"
    ::= { ruckusZDWLANConfigEntry 1 }

ruckusZDWLANConfigSSID OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (2..32)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "SSID for this Wireless LAN. It can't be modified after creating it."
    ::= { ruckusZDWLANConfigEntry 2 }

ruckusZDWLANConfigDescription OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..64))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Description for this Wireless LAN."
    ::= { ruckusZDWLANConfigEntry 3 }
    
ruckusZDWLANConfigName OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (2..32)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Name for this Wireless LAN"
    ::= { ruckusZDWLANConfigEntry 4 }    

ruckusZDWLANConfigWLANServiceType OBJECT-TYPE
    SYNTAX  INTEGER {
            standardUsage(1),
            guestAccess(2),
            hotSpotService(3) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Select The the Service type for the Wireless LAN.
        for hotSpotService,only read-only"
        DEFVAL {standardUsage}
    ::= { ruckusZDWLANConfigEntry 8 }

ruckusZDWLANConfigAuthentication OBJECT-TYPE
    SYNTAX  INTEGER {
            open(1),
            shared(2),
            eap(3),
            mac-address(4),
            eap-mac-mix(5) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Authentication method choosen for this Wireless LAN."
        DEFVAL {open}
    ::= { ruckusZDWLANConfigEntry 10 }

ruckusZDWLANConfigEncryption OBJECT-TYPE
    SYNTAX  INTEGER {
            wpa(1),
            wpa2(2),
            wpa-Mixed(3),
            wep-64(4),
            wep-128(5),
            none-enc(6) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Encryption method choosen for this Wireless LAN."
        DEFVAL {none-enc}
    ::= { ruckusZDWLANConfigEntry 12 }

ruckusZDWLANConfigWEPKeyIndex OBJECT-TYPE
    SYNTAX  INTEGER (1..4)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Select the WEP key index for the WEP encryption."
        DEFVAL {1}
    ::= { ruckusZDWLANConfigEntry 15 }

ruckusZDWLANConfigWEPKey OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (10 | 26)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enter the Pass-phrase for the WEP encryption method.
        Only 10 or 26 Hex character.such as: 1122334455"
    ::= { ruckusZDWLANConfigEntry 16 }

ruckusZDWLANConfigWPACipherType OBJECT-TYPE
    SYNTAX  INTEGER {
            tkip(1),
            aes(2),
            auto(3),
            none(0) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enter the encryption cipher method for the WPA encryption."
        DEFVAL {none}
    ::= { ruckusZDWLANConfigEntry 20 }

ruckusZDWLANConfigWPAKey OBJECT-TYPE
    SYNTAX  OCTET STRING (SIZE (8..63 | 64)) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enter the Pass-phrase for the WPA encryption.
        Specifies the WPA PSK (Wi-Fi Protected Access
        Pre Shared key)
        If the key length is 64 then all 64 characters should be in hex,
        otherwise the key assumed to be ascii."
    ::= { ruckusZDWLANConfigEntry 21 }

ruckusZDWLANConfigAuthenticationServerID OBJECT-TYPE
    SYNTAX  INTEGER 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Select the Authentication Server by the registered Server ID.
        This server id must exist in table: ruckusZDAAAConfigTable(aaa-authentication) or local."
    ::= { ruckusZDWLANConfigEntry 25 }

ruckusZDWLANConfigWirelessClientIsolation OBJECT-TYPE
    SYNTAX  INTEGER {
            enable(1),
            disable(2) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet."
    DEFVAL{2}
    ::= { ruckusZDWLANConfigEntry 28 }

ruckusZDWLANConfigWirelessWhiteListID OBJECT-TYPE
    SYNTAX  INTEGER (0..1024)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "make sure client isolation is enabled and then choose one id."
    DEFVAL{none}
    ::= { ruckusZDWLANConfigEntry 29 }

ruckusZDWLANConfigZeroITActivation OBJECT-TYPE
    SYNTAX  INTEGER {
            enable(1),
            disable(2) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable the Zero IT Activation Service of the Wireless LAN or not."
        DEFVAL{disable}
    ::= { ruckusZDWLANConfigEntry 30 }

ruckusZDWLANConfigWLANHotspotID OBJECT-TYPE
    SYNTAX  INTEGER (0..32) 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Select the Hotspot Server for the Wireless LAN.
         0, no hotspot server;
         1-32,hotspot server must exist."
    ::= { ruckusZDWLANConfigEntry 31 }

ruckusZDWLANConfigWLANServicePriority OBJECT-TYPE
    SYNTAX  INTEGER {
            high(1),
            low(2) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Select the QOS service priority for the Wireless LAN."
        DEFVAL{high}
    ::= { ruckusZDWLANConfigEntry 32 }

ruckusZDWLANConfigAccountingServerID OBJECT-TYPE
    SYNTAX  INTEGER 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Select the (RADIUS) Accounting Server by the registered Server ID.
        0,disable;
        This server id must exist in table: ruckusZDAAAConfigTable(aaa-accounting)"
        DEFVAL{0}
    ::= { ruckusZDWLANConfigEntry 35 }

ruckusZDWLANConfigAccountingUpdateInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..60)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enter interval in minutes to update Accounting Server."
    ::= { ruckusZDWLANConfigEntry 36 }


ruckusZDWLANConfigUplinkRate OBJECT-TYPE
    SYNTAX  OCTET STRING  (SIZE (1..10))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Disable or Set the Speed/Rate limiting of uplink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step.
        Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'"
        DEFVAL{"disable"}
    ::= { ruckusZDWLANConfigEntry 40 }

ruckusZDWLANConfigDownlinkRate OBJECT-TYPE
    SYNTAX  OCTET STRING  (SIZE (1..10))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Disable or Set the Speed/Rate limiting of downlink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step.
        Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'"
        DEFVAL{"disable"}
    ::= { ruckusZDWLANConfigEntry 41 }

ruckusZDWLANConfigIGMPSnooping OBJECT-TYPE
    SYNTAX  INTEGER {
            enable(1),
            disable(2) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "IGMP Snooping state of the WLAN."
    ::= { ruckusZDWLANConfigEntry 42 }
    
ruckusZDWLANConfigVlanID OBJECT-TYPE
    SYNTAX  INTEGER  ( 1..4094 )
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Specifies the VLAN ID of the WLAN.  If VLAN ID is 1, packets from this WLAN will be untagged."
        DEFVAL{1}
    ::= { ruckusZDWLANConfigEntry 45 }

ruckusZDWLANConfigDynamicVLAN OBJECT-TYPE
    SYNTAX  INTEGER {
            enable(1),
            disable(2) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable the Service of the dynamic Wireless LAN or not.
         For 802.1x EAP + MAC Address model,'set' is not supported."
        DEFVAL{disable}
    ::= { ruckusZDWLANConfigEntry 46 }

ruckusZDWLANConfigHideSSID OBJECT-TYPE
    SYNTAX  TruthValue 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Hide SSID, not to broadcast it SSID."
        DEFVAL{false}
    ::= { ruckusZDWLANConfigEntry 50 }

ruckusZDWLANConfigTunnelMode OBJECT-TYPE
    SYNTAX  TruthValue 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable Tunnel support capability for the Wireless LAN."
        DEFVAL{false}
    ::= { ruckusZDWLANConfigEntry 52 }

ruckusZDWLANConfigBackgroundScanning OBJECT-TYPE
    SYNTAX  TruthValue 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Select Background Scanning support capability for the Wireless LAN."
        DEFVAL{false}
    ::= { ruckusZDWLANConfigEntry 53 }

ruckusZDWLANConfigMaxClients OBJECT-TYPE
    SYNTAX  INTEGER (1..100)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Select the Number of client devices the AP can service for the Wireless LAN."
        DEFVAL{100}
    ::= { ruckusZDWLANConfigEntry 55 }

ruckusZDWLANConfigWebAuthentication OBJECT-TYPE
    SYNTAX  INTEGER {
            enable(1),
            disable(2) } 
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Enable the Wep Authentication or not."
        DEFVAL{disable}
    ::= { ruckusZDWLANConfigEntry 60 }

ruckusZDWLANConfigRowStatus OBJECT-TYPE
    SYNTAX  RowStatus 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Create, Delete Administration control for this Wireless LAN.
        1,ACTIVE state,only for read;
        4,CREATEANDGO, create a new table;
        6,DESTROY, delete a existing table."
    ::= { ruckusZDWLANConfigEntry 63 }


ruckusZDWLANGroupConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RuckusZDWLANGroupConfigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "ZD WLAN Group table."
    ::= { ruckusZDWLANConfig 2 }

ruckusZDWLANGroupConfigEntry OBJECT-TYPE
    SYNTAX  RuckusZDWLANGroupConfigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Specifies each ZD WLAN Group configuration entry."
    INDEX {
        ruckusZDWLANGroupID }
    ::= { ruckusZDWLANGroupConfigTable 1 }

RuckusZDWLANGroupConfigEntry ::= SEQUENCE {
  ruckusZDWLANGroupID                        	INTEGER,
  ruckusZDWLANGroupConfigName                	DisplayString,
  ruckusZDWLANGroupConfigDescription         	DisplayString,  
  ruckusZDWLANGroupVlanOverrideStatus           TruthValue,
  ruckusZDWLANGroupConfigRowStatus           	RowStatus
}

ruckusZDWLANGroupID OBJECT-TYPE
    SYNTAX  INTEGER (1..2048)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "WLAN Group ID. It can't be modified after creating it.
        Max value:for zd1000 zd1100,128;for zd3000,1024;for zd5000,2048"
    ::= { ruckusZDWLANGroupConfigEntry 1 }

ruckusZDWLANGroupConfigName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..32))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Name for this Wireless LAN Group"
    ::= { ruckusZDWLANGroupConfigEntry 5 }

ruckusZDWLANGroupConfigDescription OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..64))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Description for this Wireless LAN Group."
    ::= { ruckusZDWLANGroupConfigEntry 6 }

ruckusZDWLANGroupVlanOverrideStatus OBJECT-TYPE
    SYNTAX  TruthValue 
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "Enable Vlan Override for the Wireless LAN Group."
    ::= { ruckusZDWLANGroupConfigEntry 8 }

ruckusZDWLANGroupConfigRowStatus OBJECT-TYPE
    SYNTAX  RowStatus 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Create, Delete Administration control for this Wireless LAN Group.
        1,ACTIVE state,only for read;
        4,CREATEANDGO, create a new table;
        6,DESTROY, delete a existing table."
    ::= { ruckusZDWLANGroupConfigEntry 15 }


ruckusZDWLANGroupCfgAttrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RuckusZDWLANGroupCfgAttrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "ZD WLAN table in WLAN group."
    ::= { ruckusZDWLANConfig 3 }

ruckusZDWLANGroupCfgAttrEntry OBJECT-TYPE
    SYNTAX  RuckusZDWLANGroupCfgAttrEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Specifies each ZD WLAN configuration entry."
    INDEX {
        ruckusZDWLANGroupID,
        ruckusZDWLANID }
    ::= { ruckusZDWLANGroupCfgAttrTable 1 }

RuckusZDWLANGroupCfgAttrEntry ::= SEQUENCE { 
  ruckusZDWLANGroupCfgAttrOverrideType    INTEGER,
  ruckusZDWLANGroupCfgAttrWGVlanTag       INTEGER,
  ruckusZDWLANGroupCfgAttrRowStatus       RowStatus
}

ruckusZDWLANGroupCfgAttrOverrideType OBJECT-TYPE
    SYNTAX  INTEGER { nochange(1), tag(2) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "WLAN group vlan Override Type."
    DEFVAL { nochange }
    ::= { ruckusZDWLANGroupCfgAttrEntry 3 }

ruckusZDWLANGroupCfgAttrWGVlanTag OBJECT-TYPE
    SYNTAX  INTEGER (1..4094)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "WLAN group vlan tag. 
        for set , range is :1-4094.
        for get , range is :0-4094:
                 1: If VLAN ID is 1, packets from this WLAN will be untagged;
                 0: for node ruckusZDWLANGroupCfgAttrOverrideType is nochange"
    DEFVAL { 2 }
    ::= { ruckusZDWLANGroupCfgAttrEntry 4 }
    
ruckusZDWLANGroupCfgAttrRowStatus OBJECT-TYPE
    SYNTAX  RowStatus 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Create, Delete Administration control for this Wireless LAN group attr.
        1,ACTIVE state,only for read;
        4,CREATEANDGO, create a new table;
        6,DESTROY, delete a existing table."
    ::= { ruckusZDWLANGroupCfgAttrEntry 10 }


-- add hotspot table basicly for KT 
ruckusZDHotspotConfigTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RuckusZDHotspotConfigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "ZD Hotspot table."
    ::= { ruckusZDWLANConfig 8 }

ruckusZDHotspotConfigEntry OBJECT-TYPE
    SYNTAX  RuckusZDHotspotConfigEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Specifies each ZD Hotspot configuration entry."
    INDEX {
        ruckusZDHotspotID }
    ::= { ruckusZDHotspotConfigTable 1 }

RuckusZDHotspotConfigEntry ::= SEQUENCE {
  ruckusZDHotspotID                            INTEGER,
  ruckusZDHotspotName                	         DisplayString,
  ruckusZDHotspotRedirectLoginPage         	   DisplayString, 
  ruckusZDHotspotRedirectStartURL              DisplayString,
  ruckusZDHotspotRedirectType                  INTEGER,
  ruckusZDHotspotRowStatus                     RowStatus
}

ruckusZDHotspotID OBJECT-TYPE
    SYNTAX  INTEGER (1..32)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Hotspot ID."
    ::= { ruckusZDHotspotConfigEntry 1 }

ruckusZDHotspotName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..32))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Name for this Hotspot.Can't be modified if created."
    ::= { ruckusZDHotspotConfigEntry 2 }

ruckusZDHotspotRedirectLoginPage OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..128))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Redirect unauthenticated user to this for authentication. It is URL or IPaddress."
    ::= { ruckusZDHotspotConfigEntry 3 }

ruckusZDHotspotRedirectStartURL OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..128))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "After user is authenticated, redirect to this URL if the redirect type is url."
    ::= { ruckusZDHotspotConfigEntry 4 }

ruckusZDHotspotRedirectType OBJECT-TYPE
    SYNTAX  INTEGER { user(1), url(2) }
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "To decide the redirect target. If it is user, redirect to the user intends to visit."
    ::= { ruckusZDHotspotConfigEntry 6 }
    
ruckusZDHotspotRowStatus OBJECT-TYPE
    SYNTAX  RowStatus 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Create, Delete Administration control for this Hotspot."
    ::= { ruckusZDHotspotConfigEntry 15 }


ruckusZDClientIsolationWhiteListTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RuckusZDClientIsolationWhiteListEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "ZD Client Isolation White List table."
    ::= { ruckusZDWLANConfig 15 }

ruckusZDClientIsolationWhiteListEntry OBJECT-TYPE
    SYNTAX  RuckusZDClientIsolationWhiteListEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Specifies each ZD Client Isolation White List entry."
    INDEX { ruckusZDClientIsolationWhiteListID }
    ::= { ruckusZDClientIsolationWhiteListTable 1 }

RuckusZDClientIsolationWhiteListEntry ::= SEQUENCE {
  ruckusZDClientIsolationWhiteListID				INTEGER,
  ruckusZDClientIsolationWhiteListName				DisplayString,
  ruckusZDClientIsolationWhiteListDescription		DisplayString,
  ruckusZDClientIsolationWhiteListRowStatus			RowStatus
}

ruckusZDClientIsolationWhiteListID OBJECT-TYPE
    SYNTAX  INTEGER (1..1024)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Client Isolation White List ID. It can't be modified after creating it."
    ::= { ruckusZDClientIsolationWhiteListEntry 1 }

ruckusZDClientIsolationWhiteListName OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..32))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Name for this Client Isolation White List."
    ::= { ruckusZDClientIsolationWhiteListEntry 5 }

ruckusZDClientIsolationWhiteListDescription OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..64))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Description for this Client Isolation White List."
    ::= { ruckusZDClientIsolationWhiteListEntry 6 }

ruckusZDClientIsolationWhiteListRowStatus OBJECT-TYPE
    SYNTAX  RowStatus 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Create, Delete Administration control for this Client Isolation White List.
        1,ACTIVE state,only for read;
        4,CREATEANDGO, create a new table;
        6,DESTROY, delete a existing table."
    ::= { ruckusZDClientIsolationWhiteListEntry 15 }


ruckusZDClientIsolationWhiteListRuleTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF RuckusZDClientIsolationWhiteListRuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "ZD Client Isolation White List Attribute in Client Isolation White 
        List table."
    ::= { ruckusZDWLANConfig 16 }

ruckusZDClientIsolationWhiteListRuleEntry OBJECT-TYPE
    SYNTAX  RuckusZDClientIsolationWhiteListRuleEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Specifies each ZD Client Isolation White List entry."
    INDEX { ruckusZDClientIsolationWhiteListID,
        	ruckusZDClientIsolationWhiteListRuleID }
    ::= { ruckusZDClientIsolationWhiteListRuleTable 1 }

RuckusZDClientIsolationWhiteListRuleEntry ::= SEQUENCE {
  ruckusZDClientIsolationWhiteListRuleID				INTEGER,
  ruckusZDClientIsolationWhiteListRuleDescription		DisplayString,
  ruckusZDClientIsolationWhiteListRuleMac				DisplayString,
  ruckusZDClientIsolationWhiteListRuleDesAddr			DisplayString,
  ruckusZDClientIsolationWhiteListRuleRowStatus			RowStatus
}

ruckusZDClientIsolationWhiteListRuleID OBJECT-TYPE
    SYNTAX  INTEGER (1..1024)
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "WLAN Client Isolation White List Rule ID."
    ::= { ruckusZDClientIsolationWhiteListRuleEntry 1 }

ruckusZDClientIsolationWhiteListRuleDescription OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..64))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "Description for this Client Isolation White List Rule."
    ::= { ruckusZDClientIsolationWhiteListRuleEntry 3 }

ruckusZDClientIsolationWhiteListRuleMac OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..46))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "MAC Address"
    ::= { ruckusZDClientIsolationWhiteListRuleEntry 5 }

ruckusZDClientIsolationWhiteListRuleDesAddr OBJECT-TYPE
    SYNTAX  DisplayString (SIZE (1..46))
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "IP Address"
    ::= { ruckusZDClientIsolationWhiteListRuleEntry 6 }
    
ruckusZDClientIsolationWhiteListRuleRowStatus OBJECT-TYPE
    SYNTAX  RowStatus 
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "Create, Delete Administration control for this Wireless LAN group attr.
        1,ACTIVE state,only for read;
        4,CREATEANDGO, create a new table;
        6,DESTROY, delete a existing table."
    ::= { ruckusZDClientIsolationWhiteListRuleEntry 10 }
            
END