path: root/MIBS/telco-systems/binos/PRVT-BIST-MIB

-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename: PRVT-BIST-MIB.mib
-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information. This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM. Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------
--
PRVT-BIST-MIB DEFINITIONS ::= BEGIN

IMPORTS
MODULE-IDENTITY,
OBJECT-TYPE,
Integer32
FROM SNMPv2-SMI

switch,
reportsL2IfaceUnit,
reportsL2IfaceSlot,
reportsL2IfacePort
FROM PRVT-SWITCH-MIB

TEXTUAL-CONVENTION
FROM SNMPv2-TC;

prvtBISTMib MODULE-IDENTITY
LAST-UPDATED "200502160000Z"
ORGANIZATION "BATM Advanced Communication"
CONTACT-INFO
"BATM/Telco Systems Support team
Email:
For North America: techsupport@telco.com
For North Europe: support@batm.de, info@batm.de
For the rest of the world: techsupport@telco.com"

DESCRIPTION
"The BIST MIB module for managing build-in self-tests and retrieving the results."

-- revision history
REVISION "200502160000Z"
DESCRIPTION
"Fixed spelling errors and changed the contact info."

REVISION "200410140000Z"
DESCRIPTION
"Added functionality to schedule the self-test through SNMP, namely the bistSelfTestExecute
and bistSelfTestExecuteStatus objects. Added functionality to monitor the result of all self-tests
that can be executed by the enable mode self-test command."

REVISION "200311180000Z"
DESCRIPTION
"Initial version."

::= { switch 108 }

TestResult ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This value represents the result of the test."
SYNTAX INTEGER {
passed(1),
failed(2),
unknown(3),
notAvailable(4)
}

--
-- Groups
--

prvtBISTNotifications OBJECT IDENTIFIER ::= { prvtBISTMib 0 }
prvtBISTObjects OBJECT IDENTIFIER ::= { prvtBISTMib 1 }
prvtBISTConformance OBJECT IDENTIFIER ::= { prvtBISTMib 2 }

--
-- prvtBISTObjects
--
bistConfig OBJECT IDENTIFIER ::= { prvtBISTObjects 1 }
bistStatus OBJECT IDENTIFIER ::= { prvtBISTObjects 2 }
bistResult OBJECT IDENTIFIER ::= { prvtBISTObjects 3 }

--
-- bistConfig
--
bistSelfTestExecute OBJECT-TYPE
SYNTAX INTEGER {
noop(1), -- no operation
execute(2) -- start the test
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Setting this object to execute(2) starts the execution of the BIST test and
stores the results in bistResult.

This object does not execute port tests and does not influence the content
of portTestTable.

The results of the test execution are displayed in bistResult. A GET on this
object always returns noop(1)."
::= { bistConfig 1 }

--
-- bistStatus
--
bistSelfTestExecuteStatus OBJECT-TYPE
SYNTAX INTEGER {
not-started(1),
in-progress(2),
success(3),
error(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object displays the status of the last BIST execution. A value of
not-started(1) indicates that the test has not been manually executed since
start-up.

A value of in-progress(2) indicates that the test is still being executed.
success(3) indicates that the test has been executed, error(4) is returned,
if the test was not executed due to an internal software error."
::= { bistStatus 1 }

--
-- bistResult
--
bistCPU OBJECT IDENTIFIER ::= { bistResult 1 }
bistRAM OBJECT IDENTIFIER ::= { bistResult 2 }
bistUART OBJECT IDENTIFIER ::= { bistResult 3 }
bistSwitchCore OBJECT IDENTIFIER ::= { bistResult 4 }
bistNVRAM OBJECT IDENTIFIER ::= { bistResult 5 }
bistPowerSupply OBJECT IDENTIFIER ::= { bistResult 6 }
bistOnboardPower OBJECT IDENTIFIER ::= { bistResult 7 }
bistFan OBJECT IDENTIFIER ::= { bistResult 8 }
bistTemperature OBJECT IDENTIFIER ::= { bistResult 9 }
bistUPS OBJECT IDENTIFIER ::= { bistResult 10 }
bistPorts OBJECT IDENTIFIER ::= { bistResult 11 }

--
-- bistCPU
--
cPUTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF CPUTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the CPU test Table for verification, via SNMP, of the functionality of
the OS device CPU"
::= { bistCPU 1 }

cPUTestEntry OBJECT-TYPE
SYNTAX CPUTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "cpuTestEntry"
INDEX { cpuTestType }
::= { cPUTestTable 1 }

CPUTestEntry ::= SEQUENCE {
cpuTestType INTEGER,
cpuTestResult TestResult
}

cpuTestType OBJECT-TYPE
SYNTAX INTEGER {
bistCPUValidation(1),
bistCPUUsage(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"CPU test type:
bistCPUValidation(1), Verifying the functionality of the CPU.
bistCPUUsage(2), Verifying the CPU usage."
::= { cPUTestEntry 1 }

cpuTestResult OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the current CPU test."
::= { cPUTestEntry 2 }

--
-- bistRAM
--
ramTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF RamTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the RAM test Table for verification, via SNMP, of the functionality of
the OS device RAM"
::= { bistRAM 1 }

ramTestEntry OBJECT-TYPE
SYNTAX RamTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "ramTestEntry"
INDEX { ramTestType }
::= { ramTestTable 1 }

RamTestEntry ::= SEQUENCE {
ramTestType INTEGER,
ramTestResult TestResult
}

ramTestType OBJECT-TYPE
SYNTAX INTEGER {
bistRAMValidation(1),
bistRAMUsage(2)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RAM test type:
bistRAMValidation(1), Verifying the RAM functionality.
bistRAMUsage(2), Verifying the RAM usage."
::= { ramTestEntry 1 }

ramTestResult OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the current CPU test."
::= { ramTestEntry 2 }

--
-- bistUART
--
uartExistTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF UartExistTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the test Table for verification, via SNMP, of the existence of UARTs in
the OS device"
::= { bistUART 1 }

uartExistTestEntry OBJECT-TYPE
SYNTAX UartExistTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "uartExistTestEntry"
INDEX { uartIndex }
::= { uartExistTestTable 1 }

UartExistTestEntry ::= SEQUENCE {
uartIndex Integer32,
uartExistTestResult TestResult
}

uartIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The UART index e.g. 1,2 .. NUM of UARTs in the device"
::= { uartExistTestEntry 1 }

uartExistTestResult OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the current UART test."
::= { uartExistTestEntry 2 }

--
-- bistSwitchCore
--
bistCrossbarExistence OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Verifying Crossbar Existence."
::= { bistSwitchCore 1 }

--
-- bistNVRAM
--
nvramTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF NvramTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the NVRAM test Table for verification, via SNMP, of the functionality of
the OS device NVRAM content"
::= { bistNVRAM 1 }

nvramTestEntry OBJECT-TYPE
SYNTAX NvramTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "nvramTestEntry"
INDEX { nvramTestType }
::= { nvramTestTable 1 }

NvramTestEntry ::= SEQUENCE {
nvramTestType INTEGER,
nvramTestResult TestResult
}

nvramTestType OBJECT-TYPE
SYNTAX INTEGER {
bistBootLoaderValidation(1),
bistApplicationValidation(2),
bistStartupConfigValidation(3),
bistScriptFileSystemValidation(4),
bistJavaImageValidation(5),
bistPROMValidation(6)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"RAM test type:
bistRAMValidation(1), Verifying the Boot Loader Image.
bistApplicationValidation(2), Verifying the Application Image.
bistStartupConfigValidation(3), Verifying the Startup Configuration File.
bistScriptFileSystemValidation(4), Verifying the Script File System.
bistJavaImageValidation(5), Verifying the Java Image.
bistPROMValidation(6), Verifying the PROM."
::= { nvramTestEntry 1 }

nvramTestResult OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the current NVRAM test."
::= { nvramTestEntry 2 }

--
-- bistPowerSupply
--
powerSupplyTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF PowerSupplyTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the test Table for verification, via SNMP, of the status of the power supplies
in the OS device. Each power supply installed has a row index, determined by its
physical position."
::= { bistPowerSupply 1 }

powerSupplyTestEntry OBJECT-TYPE
SYNTAX PowerSupplyTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "powerSupplyTestEntry"
INDEX { powerSupplyIndex }
::= { powerSupplyTestTable 1 }

PowerSupplyTestEntry ::= SEQUENCE {
powerSupplyIndex Integer32,
powerSupplyTestResult TestResult
}

powerSupplyIndex OBJECT-TYPE
SYNTAX Integer32(1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The powerSupplyIndex index e.g. 1,2 .. number of the power supply in the device"
::= { powerSupplyTestEntry 1 }

powerSupplyTestResult OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Verifying the operation of the Power Supply."
::= { powerSupplyTestEntry 2 }

--
-- bistOnboardPower
--
onboardPowerTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF OnboardPowerTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the test Table for verification, via SNMP, of the
functionality of the OS device onboard power"
::= { bistOnboardPower 1 }

onboardPowerTestEntry OBJECT-TYPE
SYNTAX OnboardPowerTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "onboardPowerEntry"
INDEX { onboardPowerTestType }
::= { onboardPowerTestTable 1 }

OnboardPowerTestEntry ::= SEQUENCE {
onboardPowerTestType INTEGER,
onboardPowerTestResult TestResult
}

onboardPowerTestType OBJECT-TYPE
SYNTAX INTEGER {
bistOnboardPowerPHY(1),
bistOnboardPowerCPU(2),
bistOnboardPowerOC(3),
bistOnboardPower3-2V(4),
bistOnboardPower2-5V(5),
bistOnboardPower1-8V(6),
bistOnboardPower1-5V(7),
bistOnboardPower1-25V(8)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Onboard power test type:
bistOnboardPowerPHY(1), Verifying Onboard Power PHY.
bistOnboardPowerCPU(2), Verifying Onboard Power CPU.
bistOnboardPowerOC(3), Verifying Onboard Power OC.
bistOnboardPower3-2V(4), Verifying Onboard Power 3.2V.
bistOnboardPower2-5V(5), Verifying Onboard Power 2.5V.
bistOnboardPower1-8V(6), Verifying Onboard Power 1.8V.
bistOnboardPower1-5V(7), Verifying Onboard Power 1.5V.
bistOnboardPower1-25V(8) Verifying Onboard Power 1.25V."
::= { onboardPowerTestEntry 1 }

onboardPowerTestResult OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The result of the current onboard power test."
::= { onboardPowerTestEntry 2 }

--
-- bistFan
--
fanTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF FanTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the test Table for verification, via SNMP, of the status of the fans
in the OS device. Each fan installed has a row index, determined by its physical
position."
::= { bistFan 1 }

fanTestEntry OBJECT-TYPE
SYNTAX FanTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "fanTestEntry"
INDEX { fanIndex }
::= { fanTestTable 1 }

FanTestEntry ::= SEQUENCE {
fanIndex Integer32,
fanTestResult TestResult
}

fanIndex OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The fan index e.g. 1,2 .. number of the fan in the device"
::= { fanTestEntry 1 }

fanTestResult OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Verifying the operation of the fan."
::= { fanTestEntry 2 }

--
-- bistTemperatureTest
--
bistTemperatureTest OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Verifying the Temperature."
::= { bistTemperature 1 }

--
-- bistUPSTest
--
bistUPSTest OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Verifying UPS."
::= { bistUPS 1 }

--
-- bistPorts
--
portsTestTable OBJECT-TYPE
SYNTAX SEQUENCE OF PortsTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the ports test Table for verification, via SNMP, of the functionality of
all LAN-ports (to be performed with local loop-back)"
::= { bistPorts 1 }

portsTestEntry OBJECT-TYPE
SYNTAX PortsTestEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines the ports test entry for verification, via SNMP, of the functionality of
a LAN-port (to be performed with local loop-back)"
INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot,reportsL2IfacePort }
::= { portsTestTable 1 }

PortsTestEntry ::= SEQUENCE {
portTest TestResult
}

portTest OBJECT-TYPE
SYNTAX TestResult
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Verifying the functionality of a LAN-port (to be performed with local loop-back)."
::= { portsTestEntry 1 }

END