path: root/MIBS/telco-systems/binos/PRVT-LMGR-MIB

-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename:   PRVT-LMGR-MIB.mib
-- ** Project:    T-Metro Switches.
-- ** Purpose:    Private MIB
-- *********************************************************************
-- (c) Copyright, 2006, BATM Advanced Communications.  All rights reserved.
--                             WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information.  This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM.  Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------

PRVT-LMGR-MIB DEFINITIONS ::= BEGIN

  IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, Unsigned32      FROM SNMPv2-SMI

      OBJECT-GROUP, MODULE-COMPLIANCE                          FROM SNMPv2-CONF

      TEXTUAL-CONVENTION, RowStatus, TruthValue                FROM SNMPv2-TC

      InetAddressType, InetAddress, InetAddressIPv4            FROM INET-ADDRESS-MIB
      mpls				 		FROM PRVT-CR-LDP-MIB;


  prvtLmgr  MODULE-IDENTITY
      LAST-UPDATED "200606110000Z" 
      ORGANIZATION "BATM Advanced Communication"
      CONTACT-INFO
                   " BATM/Telco Systems Support team
					Email: 
				For North America: techsupport@telco.com
				For North Europe: support@batm.de, info@batm.de
				For the rest of the world: techsupport@telco.com"
      DESCRIPTION  "The MIB module for management of the PRVT-LMGR
                    product."

-- revision history
	REVISION       "200606110000Z"
	DESCRIPTION
	"Initial"
  ::= { mpls 4 }

  prvtLmgrObjects OBJECT IDENTIFIER ::= { prvtLmgr 1 } -- tables

--  Textual Conventions.

  PrvtLmgrAdminStatus ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The desired administrative state of a Label
                   Manager entity."
      SYNTAX      INTEGER {
                      up(1),
                      down(2)
                  }

  PrvtLmgrOperStatus ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The current operational state of a Label Manager
                   entity. If the operational state is goingDown then
                   a request to activate the Label Manager entity
                   is rejected."
      SYNTAX      INTEGER {
                      up(1),          -- active
                      down(2),        -- inactive
                      goingUp(3),     -- activating
                      goingDown(4),   -- deactivating
                      actFailed(5)    -- activation failed
                  }

  PrvtLmgrPartnerStatus ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The state of a Label Manager partner entity."
      SYNTAX      INTEGER {
                      initial(0),     -- partner not active
                      activating(1),  -- partner activating
                      active(2),      -- partner active
                      deactivating(3),-- partner deactivating
                      failedOver(4),  -- partner failed, but recovering
                      failed(5),      -- partner failed, but recovering
                      unavailable(6)  -- partner unavailable
                  }

  PrvtLmgrIndex ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The index value identifying a Label Manager
                   entity."
      SYNTAX      Unsigned32

  PrvtLmgrControlModes ::= TEXTUAL-CONVENTION
      STATUS      current
      DESCRIPTION "The Control Mode of Label Manager."
      SYNTAX      INTEGER {
                      ordered(1),     -- control is ordered
                      independent(2)  -- control is independent
                  }

-- End of textual conventions

   prvtLsrId  OBJECT-TYPE
        SYNTAX      InetAddressIPv4
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
         "This object allows LSR Id value to be set. It is needed for unique 
          identification of LSR instance, from which the packets are sent
          through created LDP session.
          
          Although every 32 bit value is valid, it is recommended
          the device's loopback ip address to be used.

          A value of zero indicates that no LSR ID has been
          configured.  In this case, the signaling protocol stack
          should construct a unique LSR ID from the other
          information that is available to it (such as IP
          addresses).  For example, PRVT-CR-LDP and PRVT-RSVP derive
          the LSR ID by taking the 32 low bits of the following
          _transport_address_ field, left padding with zeros if
          necessary."
       ::= { prvtLmgrObjects 1 }

-- Label Manager entity table.
-- This table is used to create and manage Label Manager entities.

    prvtLmgrLsrEntityTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PrvtLmgrLsrEntityEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry represents an instance of the Label Manager.
             Each instance is identified by LSR index."
       ::= { prvtLmgrObjects 2 }

    prvtLmgrLsrEntityEntry OBJECT-TYPE
        SYNTAX      PrvtLmgrLsrEntityEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry represents a Label Manager entity."
        INDEX       {  prvtlmgrLsrEntityLsrIndex  }
       ::= { prvtLmgrLsrEntityTable 1 }


    PrvtLmgrLsrEntityEntry ::= SEQUENCE {
            prvtlmgrLsrEntityLsrIndex           PrvtLmgrIndex,
            prvtLmgrLsrEntityAdminStatus        PrvtLmgrAdminStatus,
            prvtLmgrLsrEntityOperStatus         PrvtLmgrOperStatus,
            prvtLmgrLsrEntityRowStatus          RowStatus,
            prvtLmgrLsrEntityMinLsiBuffers      Unsigned32,
            prvtLmgrLsrEntityMaxLsiBuffers      Unsigned32,
            prvtLmgrLscStatus                   PrvtLmgrPartnerStatus,
            prvtLmgrLdbCount                    Unsigned32,
            prvtLmgrLsrEntityLsrId              Unsigned32,
            prvtLmgrLsrEntityTranAddrType       InetAddressType,
            prvtLmgrLsrEntityTranAddrLen        Unsigned32,
            prvtLmgrLsrEntityTranAddr           InetAddress,
            prvtLmgrLsrEntityControlMode        PrvtLmgrControlModes,
            prvtLmgrLsrEntityMergeLsps          TruthValue,
            prvtLmgrLsrEntityLoopDetection      TruthValue,
            prvtLmgrLsrEntityPerformGrouping    TruthValue,
            prvtLmgrLsrAutoStaticLsps           TruthValue,
            prvtLmgrLsrDisplayPhpXCs            TruthValue,
            prvtLmgrLsrEntityIpv6TranAddr       InetAddress
       }

    prvtlmgrLsrEntityLsrIndex OBJECT-TYPE
        SYNTAX      PrvtLmgrIndex
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "LSR index for this prvtLmgrLsrEntityEntry. This is the
             entity index passed in the Label Manager create
             parameters."
       ::= { prvtLmgrLsrEntityEntry 1 }

    prvtLmgrLsrEntityAdminStatus   OBJECT-TYPE
        SYNTAX      PrvtLmgrAdminStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Administrative status for Label Manager. When
          prvtLmgrLsrEntityRowStatus is 'active' and
          prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is
          active and only these two fields and
          prvtLmgrLsrEntityMinLsiBuffers can be modified."
        DEFVAL { up }
       ::= { prvtLmgrLsrEntityEntry 2 }

    prvtLmgrLsrEntityOperStatus OBJECT-TYPE
        SYNTAX      PrvtLmgrOperStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
         "The current operational status of the Label Manager
          entity."
       ::= { prvtLmgrLsrEntityEntry 3 }

    prvtLmgrLsrEntityRowStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Row status for the Label Manager table entry, used to
          create and destroy table entries. When
          prvtLmgrLsrEntityRowStatus is 'active' and
          prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is
          active and only these two fields and
          prvtLmgrLsrEntityMinLsiBuffers can be modified."
       ::= { prvtLmgrLsrEntityEntry 4 }

    prvtLmgrLsrEntityMinLsiBuffers OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Minimum number of buffers to allocate for Label Switch
          Interface requests.  This number includes any buffers sent
          to the Label Switch Controller and awaiting a response."
       ::= { prvtLmgrLsrEntityEntry 5 }

    prvtLmgrLsrEntityMaxLsiBuffers OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Maximum number of buffers to allocate for Label Switch
          Interface requests.  A value of 0 means no maximum,
          otherwise this value must equal or exceed the minimum
          buffer count."
       ::= { prvtLmgrLsrEntityEntry 6 }

    prvtLmgrLscStatus OBJECT-TYPE
        SYNTAX      PrvtLmgrPartnerStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
         "Diagnostic field providing information about the status
	  of the Label Switch Controller as seen by Label Manager."
       ::= { prvtLmgrLsrEntityEntry 7 }

    prvtLmgrLdbCount  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
         "Diagnostic field providing information about the number
         of active interfaces between Label Manager and the its
         Label Database Interface users (PRVT-TEMIB and PRVT-RSVP)."
       ::= { prvtLmgrLsrEntityEntry 8 }

    prvtLmgrLsrEntityLsrId  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
         "An ID that uniquely identifies this LSR within the
          network.

          The LSR ID is typically derived from one of the LSR's IP
          addresses.  It may be used for path vector based loop
          detection if the signaling protocol in use implements
          that.

          A value of zero indicates that no LSR ID has been
          configured.  In this case, the signaling protocol stack
          should construct a unique LSR ID from the other
          information that is available to it (such as IP
          addresses).  For example, PRVT-CR-LDP and PRVT-RSVP derive
          the LSR ID by taking the 32 low bits of the following
          _transport_address_ field, left padding with zeros if
          necessary.

          The LSR ID is only used to identify this LSR on IPv4
          networks.  See dcLmgrLsrEntityIpv6TranAddr for equivalent
          function for use in IPv6 networks."
       ::= { prvtLmgrLsrEntityEntry 9 }

     prvtLmgrLsrEntityTranAddrType  OBJECT-TYPE
        SYNTAX      InetAddressType
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "The type of the internetwork layer address used as the
          transport address.  Currently this must be IPv4.  See
          dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
          field for use in IPv6 networks.

          The transport address is used by LDP as the source
          transport address for LDP Hello messages for the global
          (per-platform) label space.

          The transport address is used by RSVP as the source
          address for messages originating on unnumbered interfaces.

          This object indicates how the value of
          mplsLdpEntityTransAddr is to be interpreted."
       ::= { prvtLmgrLsrEntityEntry 10 }

     prvtLmgrLsrEntityTranAddrLen  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "The length of the internetwork layer address used as the
          transport address for LDP Hello messages in the global
          label space and for messages originating on unnumbered
          interfaces in RSVP.  Currently this must be an IPv4
          address.

          This object indicates how many elements of the
          mplsLdpEntityTransAddr array are valid.  This value must
          not exceed _LMGR_LSR_ADDR_LEN_."
       ::= { prvtLmgrLsrEntityEntry 11 }

     prvtLmgrLsrEntityTranAddr  OBJECT-TYPE
        SYNTAX      InetAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "The value of the internetwork layer address used as the
          transport address for LDP Hello messages in the global
          label space and for messages originating on unnumbered
          interfaces in RSVP.

          This must be an IPv4 address.  See
          dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
          field for use in IPv6 networks.

          If the transport address is not set, then _lsr_id_ must be
          set to zero.  In this case, the transport address and LSR
          ID are taken from an address on the Interface Information
          Interface."
       ::= { prvtLmgrLsrEntityEntry 12 }

     prvtLmgrLsrEntityControlMode  OBJECT-TYPE
        SYNTAX      PrvtLmgrControlModes
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "The LSP control mode that this LSR should adopt.
          This field is only used by Label Manager in systems where
          it supports LDP and/or CR-LDP."
       ::= { prvtLmgrLsrEntityEntry 13 }

     prvtLmgrLsrEntityMergeLsps  OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Whether this LSR should aim to merge LSPs, where permitted
          by the underlying hardware.
          This field is only used by Label Manager in systems where
          it supports LDP and/or CR-LDP."
        DEFVAL { false }
       ::= { prvtLmgrLsrEntityEntry 14 }

     prvtLmgrLsrEntityLoopDetection  OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Whether this LSR should perform loop detection.
          This field is only used by Label Manager in systems where
          it supports LDP and/or CR-LDP."
        DEFVAL { false }
       ::= { prvtLmgrLsrEntityEntry 15 }

     prvtLmgrLsrEntityPerformGrouping  OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Whether Label Manager should perform LSP grouping on
          behalf of the LDBI user.  This field is currently only
          used for systems supporting RSVP."
        DEFVAL { false }
       ::= { prvtLmgrLsrEntityEntry 16 }

     prvtLmgrLsrAutoStaticLsps  OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Whether Label Manager should automatically activate or
          deactivate static LSPs when the interfaces on which they
          depend become active or inactive."
        DEFVAL { false }
       ::= { prvtLmgrLsrEntityEntry 17 }

     prvtLmgrLsrDisplayPhpXCs  OBJECT-TYPE
        SYNTAX      TruthValue
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "Whether Label Manager should display the virtual cross
          connects its sets up at the Egress node of Implicit Null
          and Explicit Null LSPs in the mplsXcTable.  These cross
          connects do not represent real switch programming, but do
          show the prescence of such LSPs, and correspond to the
          entries in the mplsTunnelTable for theses types of LSP."
        DEFVAL { false }
       ::= { prvtLmgrLsrEntityEntry 18 }

     prvtLmgrLsrEntityIpv6TranAddr  OBJECT-TYPE
        SYNTAX      InetAddress
        MAX-ACCESS  read-create
        STATUS      current
        DESCRIPTION
         "The value of the internetwork address used for messages
          originating on unnumbered interfaces in RSVP in an IPv6
          network.

          This value also uniquely identifies this LSR within an
          IPv6 network.

          If this address is not set, the IPv6 transport address is
          taken from an address on the Interface Information
          Interface.

          A length value of zero indicates that no IPv6 transport
          address has been configured.  In this case, if IPv6
          support is configured, the signaling protocol stack should
          use an IPv6 address configured to the signaling stack over
          the Interface Information Interface that is flagged as
          suitable for use as a stable address."
        ::= { prvtLmgrLsrEntityEntry 19 }

-- End of Label Manager entity table.
-- Label Manager LSP XC Table
-- This table is used to create and manage LSP XCs

    prvtLmgrLsrLspXcTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PrvtLmgrLsrLspXcEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry represents an instance of an LSP
             cross-conect between a single in-segment and a
             single out-segment."
       ::= { prvtLmgrObjects 3 }

    prvtLmgrLsrLspXcEntry OBJECT-TYPE
        SYNTAX      PrvtLmgrLsrLspXcEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry represents an LSP cross connect."
        INDEX       {  prvtlmgrLsrEntityLsrIndex,
                       prvtLmgrLsrLspXcIndex,
                       prvtLmgrLsrLspInSegLabel,
                       prvtLmgrLsrLspOutSegIndex }

       ::= { prvtLmgrLsrLspXcTable 1 }

    PrvtLmgrLsrLspXcEntry ::= SEQUENCE {
            prvtLmgrLsrLspXcIndex               Unsigned32,
            prvtLmgrLsrLspInSegIndex            Unsigned32,
            prvtLmgrLsrLspInSegIfIndex          Unsigned32,
            prvtLmgrLsrLspInSegLabel            Unsigned32,
            prvtLmgrLsrLspOutSegIndex           Unsigned32,
            prvtLmgrLsrLspOutSegIfIndex         Unsigned32,
            prvtLmgrLsrLspOutSegLabel           Unsigned32,
            prvtLmgrLsrLspOutSegNextHopAddr     InetAddressIPv4
         }

    prvtLmgrLsrLspXcIndex  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "XC index for this prvtLmgrLsrLspXc.  This is the XC index
             assigned by Label Manager for the LSP."
       ::= { prvtLmgrLsrLspXcEntry 2 }

    prvtLmgrLsrLspInSegIndex  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the in segment.  This is the index assigned
             by Label Manager for the in segment."
       ::= { prvtLmgrLsrLspXcEntry 3 }

    prvtLmgrLsrLspInSegIfIndex  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "If index for the in segment.  This is the If index
             specified on setting up the in segment."
       ::= { prvtLmgrLsrLspXcEntry 4 }

    prvtLmgrLsrLspInSegLabel  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Top label for the in segment.  This is the Label assigned
             by Label Manager Label Library for the in segment."
       ::= { prvtLmgrLsrLspXcEntry 5 }


    prvtLmgrLsrLspOutSegIndex  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index for the out segment.  This is the index assigned
             by Label Manager for the out segment."
       ::= { prvtLmgrLsrLspXcEntry 6 }

     prvtLmgrLsrLspOutSegIfIndex  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Interface Index for the out segment.  This is the
             interface index specified when setting up the out segment."
       ::= { prvtLmgrLsrLspXcEntry 7 }

     prvtLmgrLsrLspOutSegLabel  OBJECT-TYPE
        SYNTAX      Unsigned32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Top label for the out segment.  This is the label
             specified by the remote LSR for the out segment."
       ::= { prvtLmgrLsrLspXcEntry 8 }

     prvtLmgrLsrLspOutSegNextHopAddr  OBJECT-TYPE
        SYNTAX      InetAddressIPv4
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Next hop address for the out segment.  This is the address
             specified by the remote LSR for the out segment."
       ::= { prvtLmgrLsrLspXcEntry 9 }

-- Module compliance.

-- Conformance Information.

  prvtLmgrConformance   OBJECT IDENTIFIER ::= { prvtLmgr 2 }

  prvtLmgrCompliances  OBJECT IDENTIFIER ::= { prvtLmgrConformance 1 }
  prvtLmgrGroups       OBJECT IDENTIFIER ::= { prvtLmgrConformance 2 }

  prvtLmgrCompliance MODULE-COMPLIANCE
    STATUS current
    DESCRIPTION
        "The compliance statement for the PRVT-LMGR product."
    MODULE

    GROUP prvtLmgrEntityGroup
    DESCRIPTION
        "Objects for prvtLmgrEntTable."

    GROUP prvtLmgrMiscGroup
    DESCRIPTION
        "Miscellaneous objects."

    ::= { prvtLmgrCompliances 1 }

-- Units of Conformance (Groups)

prvtLmgrEntityGroup OBJECT-GROUP
   OBJECTS {
      prvtLmgrLsrEntityAdminStatus,
      prvtLmgrLsrEntityOperStatus,
      prvtLmgrLsrEntityRowStatus,
      prvtLmgrLsrEntityMinLsiBuffers,
      prvtLmgrLsrEntityMaxLsiBuffers,
      prvtLmgrLsrEntityLsrId,
      prvtLmgrLsrEntityTranAddrType,
      prvtLmgrLsrEntityTranAddrLen,
      prvtLmgrLsrEntityTranAddr,
      prvtLmgrLsrEntityControlMode,
      prvtLmgrLsrEntityMergeLsps,
      prvtLmgrLsrEntityLoopDetection,
      prvtLmgrLsrEntityPerformGrouping
   }
    STATUS  current
    DESCRIPTION
           "Label Manager Entity Objects."
    ::= { prvtLmgrGroups 2 }

prvtLmgrMiscGroup OBJECT-GROUP
   OBJECTS {
      prvtLmgrLscStatus,
      prvtLmgrLdbCount,
      prvtLmgrLsrAutoStaticLsps,
      prvtLmgrLsrDisplayPhpXCs,
      prvtLmgrLsrLspInSegIfIndex,
      prvtLmgrLsrLspInSegLabel,
      prvtLmgrLsrLspOutSegIfIndex,
      prvtLmgrLsrLspOutSegLabel,
      prvtLmgrLsrLspOutSegNextHopAddr,
      prvtLmgrLsrEntityIpv6TranAddr
   }
    STATUS  current
    DESCRIPTION
           "Miscellaneous Non-Mandatory Objects."
    ::= { prvtLmgrGroups 3 }

END