path: root/MIBS/telco-systems/binox/PRVT-ISIS-MIB

-- *********************************************************************
-- **
-- ** BATM Advanced Communications.
-- **
-- *********************************************************************
-- ** Filename: PRVT-ISIS-MIB.mib
-- ** Project: T-Metro Switches.
-- ** Purpose: Private MIB
-- *********************************************************************
-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
-- WARNING:
--
-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
--
-- This file is the property of BATM Advanced Communications and contains
-- proprietary and confidential information. This file is made
-- available to authorized BATM customers on the express
-- condition that neither it, nor any of the information contained
-- therein, shall be disclosed to third parties or be used for any
-- purpose other than to replace, modify or upgrade firmware and/or
-- software components of BATM manufactured equipment within the
-- authorized customer's network, and that such transfer be
-- completed in accordance with the instructions provided by
-- BATM. Any other use is strictly prohibited.
--
-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
--
-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
--
-- ----------------------------------------------------------------------------

PRVT-ISIS-MIB DEFINITIONS ::= BEGIN

IMPORTS
    InterfaceIndex
        FROM IF-MIB
    InetAddressPrefixLength
        FROM INET-ADDRESS-MIB
    routingProtocols
        FROM PRVT-SWITCH-MIB
    Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, 
    OBJECT-TYPE, TimeTicks, Unsigned32
        FROM SNMPv2-SMI
    RowStatus, TEXTUAL-CONVENTION, TruthValue
        FROM SNMPv2-TC;

prvtIsisMIB MODULE-IDENTITY
    LAST-UPDATED "201002120000Z"
    ORGANIZATION 
        "BATM Advanced Communication"
    CONTACT-INFO 
        "BATM/Telco Systems Support team
         Email:
         For North America: techsupport@telco.com
         For North Europe: support@batm.de, info@batm.de
         For the rest of the world: techsupport@telco.com"
    DESCRIPTION 
        "The MIB module for management of the IS-IS protocol."
    REVISION    "201002120000Z"
    DESCRIPTION 
        "Initial version."
    ::= { routingProtocols 4 }


PrvtIsisInetAddressType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "A value that represents a type of Internet address."
    SYNTAX      INTEGER { unknown(0), ipv4(1), ipv6(2), ipv4z(3), 
                    ipv6z(4), dns(5) }

PrvtIsisInetAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "255a"
    STATUS      current
    DESCRIPTION 
        "An IPv4 IPv6 address depending upon the value of a
         matching InetAddressType object.
         An IPv4 address consiats of 4 octets in network-byte order.
         An IPv6 address consiats of 16 octets in network-byte order"
    SYNTAX      OCTET STRING (SIZE(4 | 16))

PrvtIsisIPv4Address ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1d.1d.1d.1d"
    STATUS      current
    DESCRIPTION 
        "An IPv4 address consisting of 4 octets in network-byte order.
         A length of zero octets represents no IP address has been
         assigned."
    SYNTAX      OCTET STRING (SIZE(0 | 4))

PrvtIsisIPv6Address ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
    STATUS      current
    DESCRIPTION 
        "An IPv4 address consisting of 16 octets in network-byte order.
         A length of zero octets represents no IP address has been
         assigned."
    SYNTAX      OCTET STRING (SIZE(0 | 16))

PrvtIsisHostName ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "255t"
    STATUS      current
    DESCRIPTION 
        "A valid host name."
    SYNTAX      OCTET STRING

PrvtIsisAuthUserDataString ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS      current
    DESCRIPTION 
        "Authentication user data."
    SYNTAX      OCTET STRING

PrvtIsisOSINSAddress ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS      current
    DESCRIPTION 
        "OSI Network Service Address, e.g. NSAP, SNPA, or Network
         Entity Title"
    SYNTAX      OCTET STRING (SIZE(1..20))

PrvtIsisSystemID ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS      current
    DESCRIPTION 
        "A ID for an Intermediate System. This should
         be unique within a network, and is included
         in all PDUs originated by an Intermediate System.
         The protocol does not place any meanings upon
         the bits, other than using ordering to break
         ties in electing a Designated IS on a LAN."
    SYNTAX      OCTET STRING

PrvtIsisLinkStatePDUID ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS      current
    DESCRIPTION 
        "A Link State PDU Identifier."
    SYNTAX      OCTET STRING (SIZE(8))

PrvtIsisAdminState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Type used in enabling and disabling a row."
    SYNTAX      INTEGER { on(1), off(2) }

PrvtIsisLSPBuffSize ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Integer sub range for maximum LSP size."
    SYNTAX      Integer32 (512..16000)

PrvtIsisLevelState ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "States of the IS-IS protocol."
    SYNTAX      INTEGER { off(1), on(2), waiting(3), overloaded(4) }

PrvtIsisDefaultMetric ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Integer sub-range for default metric for single hop.
         ISO 10589 provides for 4 types of metric. Only the
         'default' metric is used in practice."
    SYNTAX      Integer32 (0..63)

PrvtIsisWideMetric ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Wide Metric for IS Neighbors. ISO 10589 provides a
         6 bit metric. Traffic Engineering extensions provide
         24 bit metrics."
    SYNTAX      Unsigned32 (0..16777215)

PrvtIsisFullMetric ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Full Metric for IP Routes. Traffic Engineering extensions
         provide 32 bit metrics."
    SYNTAX      Unsigned32

PrvtIsisMetricType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Is this an Internal or External Metric?"
    SYNTAX      INTEGER { internal(1), external(2) }

PrvtIsisMetricStyle ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Do we use 1195 style Metrics or wide metrics."
    SYNTAX      INTEGER { narrow(1), wide(2), both(3) }

PrvtIsisISLevel ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "Identifies a level."
    SYNTAX      INTEGER { none(0), area(1), domain(2) }

PrvtIsisCircuitID ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "1x:"
    STATUS      current
    DESCRIPTION 
        "ID for a circuit."
    SYNTAX      OCTET STRING

PrvtIsisISPriority ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Integer sub-range for IS-IS priority."
    SYNTAX      Integer32 (0..127)

PrvtIsisUnsigned16TC ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "An Unsigned32 further restricted to 16 Bits. Note that
         the ASN.1 BER encoding may still require 24 Bits for
         some values."
    SYNTAX      Unsigned32 (0..65535)

PrvtIsisUnsigned16NoZeroTC ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "Same as Unsigned16TC, except that 0 is not permitted."
    SYNTAX      Unsigned32 (1..65535)

PrvtIsisMaxAgeTC ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "TC for prvtIsisSysMaxAge."
    SYNTAX      Unsigned32 (350..65535)

PrvtIsisReceiveLSPBufferSizeTC ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "TC for prvtIsisSysReceiveLSPBufferSize"
    SYNTAX      Unsigned32 (1492..16000)

PrvtIsisUnsigned8TC ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d"
    STATUS      current
    DESCRIPTION 
        "An Unsigned32 further restricted to 8 Bits. Note that
         the ASN.1 BER encoding may still require 16 Bits for
         some values."
    SYNTAX      Unsigned32 (0..255)

PrvtIsisOperStatus ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "The current operational state of an IS-IS entity."
    SYNTAX      INTEGER { operStatusUp(1), operStatusDown(2), 
                    operStatusGoingUp(3), operStatusGoingDown(4), 
                    operStatusActFailed(5) }

PrvtIsisSysRestartType ::= TEXTUAL-CONVENTION
    STATUS      current
    DESCRIPTION 
        "The type of restart procedures to follow
         when IS-IS activates."
    SYNTAX      INTEGER { none(0), start(1), restart(2) }

prvtIsisMIBObjects OBJECT IDENTIFIER
    ::= { prvtIsisMIB 1 }

prvtIsisSystem OBJECT IDENTIFIER
    ::= { prvtIsisMIBObjects 1 }

prvtIsisSysTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisSysEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The set of instances of the Integrated IS-IS
         protocol existing on the system."
    ::= { prvtIsisSystem 1 }

prvtIsisSysEntry OBJECT-TYPE
    SYNTAX      PrvtIsisSysEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each row defines information specific to a single
         instance of the IS-IS protocol existing on the system."
    REFERENCE   
        "{ISIS.poi cLNSISISBasic-P (1)}"
    INDEX       { prvtIsisSysInstance }
    ::= { prvtIsisSysTable 1 }

PrvtIsisSysEntry ::= SEQUENCE {
    prvtIsisSysInstance                 Integer32,
    prvtIsisSysExistState               RowStatus,
    prvtIsisSysVersion                  INTEGER,
    prvtIsisSysType                     INTEGER,
    prvtIsisSysID                       PrvtIsisSystemID,
    prvtIsisSysMaxPathSplits            Integer32,
    prvtIsisSysMaxLSPGenInt             Integer32,
    prvtIsisSysPollESHelloRate          PrvtIsisUnsigned16NoZeroTC,
    prvtIsisSysWaitTime                 PrvtIsisUnsigned16NoZeroTC,
    prvtIsisSysShutdown                 TruthValue,
    prvtIsisSysL2toL1Leaking            TruthValue,
    prvtIsisSysMaxAge                   PrvtIsisMaxAgeTC,
    prvtIsisSysReceiveLSPBufferSize     PrvtIsisReceiveLSPBufferSizeTC,
    prvtIsisSysOperStatus               PrvtIsisOperStatus,
    prvtIsisSysAllowAutoI3Config        TruthValue,
    prvtIsisSysCalcMaxDelay             Unsigned32,
    prvtIsisSysCalcThrshUpdStart        Unsigned32,
    prvtIsisSysCalcThrshUpdRestart      Unsigned32,
    prvtIsisSysCalcThrshRestartLimit    Unsigned32,
    prvtIsisSysCalcPauseFreq            Unsigned32,
    prvtIsisSysCheckChecksums           Unsigned32,
    prvtIsisSysZeroAgeLifetime          Integer32,
    prvtIsisSysNumUpdPending            Gauge32,
    prvtIsisSysNumUpdMerged             Counter32,
    prvtIsisSysNumCksumsPending         Gauge32,
    prvtIsisSysTEMetricPcntge           Integer32,
    prvtIsisSysMaxBwidthPcntge          Integer32,
    prvtIsisSysMaxResBwidthPcntge       Integer32,
    prvtIsisSysUnresBwidthPcntge        Integer32,
    prvtIsisSysMaxLSPBwidthPcntge       Integer32,
    prvtIsisSysMinLSPBwidthPcntge       Integer32,
    prvtIsisSysMTUSizePcntge            Integer32,
    prvtIsisSysTERouterID               IpAddress,
    prvtIsisSysIPv6TERouterID           PrvtIsisIPv6Address,
    prvtIsisSysMaxExternalRoutes        Unsigned32,
    prvtIsisSysMaxExternalRoutesAct     INTEGER,
    prvtIsisSysLspFullSuppress          INTEGER,
    prvtIsisSysLspFullSetDBOL           TruthValue,
    prvtIsisSysRestartHelpPeer          TruthValue,
    prvtIsisSysRestartActivationType    PrvtIsisSysRestartType,
    prvtIsisSysRestartAutoResetType     PrvtIsisSysRestartType,
    prvtIsisSysRestartAdjacencyWait     Integer32,
    prvtIsisSysMaxRecoveryTime          Integer32,
    prvtIsisSysClearStats               TruthValue,
    prvtIsisSysSetAttached              INTEGER,
    prvtIsisSysProtSupported            BITS,
    prvtIsisSysRstrctLanAdjsToSubnet    TruthValue,
    prvtIsisSysHostName                 PrvtIsisHostName,
    prvtIsisSysCalcSoonAfterCircChng    TruthValue,
    prvtIsisSysSendNotifications        BITS,
    prvtIsisSysLvl1OrigLSPBuffSize      PrvtIsisLSPBuffSize,
    prvtIsisSysLvl1MinLSPGenInt         PrvtIsisUnsigned16NoZeroTC,
    prvtIsisSysLvl1OverloadState        PrvtIsisLevelState,
    prvtIsisSysLvl1SetOverload          TruthValue,
    prvtIsisSysLvl1SetOverloadUntil     TimeTicks,
    prvtIsisSysLvl1MetricStyle          PrvtIsisMetricStyle,
    prvtIsisSysLvl1SPFConsiders         PrvtIsisMetricStyle,
    prvtIsisSysLvl1TEEnabled            TruthValue,
    prvtIsisSysLvl1IPv6TEEnabled        TruthValue,
    prvtIsisSysLvl1RestartT2Duration    Integer32,
    prvtIsisSysLvl1AuthUser             PrvtIsisAuthUserDataString,
    prvtIsisSysLvl2OrigLSPBuffSize      PrvtIsisLSPBuffSize,
    prvtIsisSysLvl2MinLSPGenInt         PrvtIsisUnsigned16NoZeroTC,
    prvtIsisSysLvl2OverloadState        PrvtIsisLevelState,
    prvtIsisSysLvl2SetOverload          TruthValue,
    prvtIsisSysLvl2SetOverloadUntil     TimeTicks,
    prvtIsisSysLvl2MetricStyle          PrvtIsisMetricStyle,
    prvtIsisSysLvl2SPFConsiders         PrvtIsisMetricStyle,
    prvtIsisSysLvl2TEEnabled            TruthValue,
    prvtIsisSysLvl2IPv6TEEnabled        TruthValue,
    prvtIsisSysLvl2RestartT2Duration    Integer32,
    prvtIsisSysLvl2AuthUser             PrvtIsisAuthUserDataString
}

prvtIsisSysInstance OBJECT-TYPE
    SYNTAX      Integer32 (1..2147483647)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The unique identifier of the Integrated IS-IS
         instance to which this row corresponds."
    ::= { prvtIsisSysEntry 1 }

prvtIsisSysExistState OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The existence state (RowStatus) of the IS-IS router.
         Setting this to state 'destroy' forces the router to
         forget all the current configuration. Setting the
         state to 'notInService' stops protocol processing, but
         retains the configuration."
    ::= { prvtIsisSysEntry 2 }

prvtIsisSysVersion OBJECT-TYPE
    SYNTAX      INTEGER { unknown(0), one(1) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The version number of the IS-IS protocol that
         is implemented."
    REFERENCE   
        "{ISIS.aoi version (1)}"
    ::= { prvtIsisSysEntry 3 }

prvtIsisSysType OBJECT-TYPE
    SYNTAX      INTEGER { level1IS(1), level2IS(2), level1L2IS(3) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "At which levels is the Intermediate System
         running? This object follows the
         ReplaceOnlyWhileDisabled behavior."
    REFERENCE   
        "{ISIS.aoi iSType (2)}"
    ::= { prvtIsisSysEntry 4 }

prvtIsisSysID OBJECT-TYPE
    SYNTAX      PrvtIsisSystemID
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The ID for this instance of the Integrated IS-IS
         protocol. This value is appended to each of the
         area addresses to form the Network Entity Titles.
         This value is a 6 byte MAC address.
         
         This object follows the ReplaceOnlyWhileDisabled
         behavior."
    REFERENCE   
        "{ISIS.aoi systemId (119)}"
    ::= { prvtIsisSysEntry 5 }

prvtIsisSysMaxPathSplits OBJECT-TYPE
    SYNTAX      Integer32 (1..32)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Maximum number of paths with equal routing metric value
         which it is permitted to split between. This object
         follows the ReplaceOnlyWhileDisabled behavior."
    REFERENCE   
        "{ISIS.aoi maximumPathSplits (3)}"
    ::= { prvtIsisSysEntry 6 }

prvtIsisSysMaxLSPGenInt OBJECT-TYPE
    SYNTAX      Integer32 (1..65235)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Maximum interval, in seconds, between generated LSPs
         by this instance of the protocol. This object follows
         the ResettingTimer behavior. The value must be
         greater than any value configured for
         prvtIsisSysLevelxMinLSPGenInt, and should be at least 300
         seconds less than prvtIsisSysMaxAge."
    REFERENCE   
        "{ISIS.aoi maximumLSPGenerationInterval (6)}"
    ::= { prvtIsisSysEntry 7 }

prvtIsisSysPollESHelloRate OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16NoZeroTC
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The value, in seconds, to be used for the suggested ES
         configuration timer in ISH PDUs when soliciting the ES
         configuration."
    REFERENCE   
        "{ISIS.aoi pollESHelloRate (13)}"
    ::= { prvtIsisSysEntry 8 }

prvtIsisSysWaitTime OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16NoZeroTC
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Number of seconds to delay in state 'waiting' before
         entering the state 'on'. This object follows the ResettingTimer
         behavior."
    REFERENCE   
        "{ISIS.aoi waitingTime (15)}"
    ::= { prvtIsisSysEntry 9 }

prvtIsisSysShutdown OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The administrative state of this instance of the
         Integrated IS-IS protocol. Setting this object to the
         value 'false' when its current value is 'true' enables operation
         of this instance of the Integrated IS-IS protocol."
    ::= { prvtIsisSysEntry 10 }

prvtIsisSysL2toL1Leaking OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "If true, allow the router to leak L2 routes into L1."
    ::= { prvtIsisSysEntry 11 }

prvtIsisSysMaxAge OBJECT-TYPE
    SYNTAX      PrvtIsisMaxAgeTC
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Value to place in RemainingLifeTime field of
         the LSPs we generate.
         This should be at least 300 seconds greater than
         prvtIsisSysMaxLSPGenInt."
    ::= { prvtIsisSysEntry 12 }

prvtIsisSysReceiveLSPBufferSize OBJECT-TYPE
    SYNTAX      PrvtIsisReceiveLSPBufferSizeTC
    UNITS       "bytes"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Size of the largest buffer we are designed or
         configured to store. This should be at least
         as big as the maximum prvtIsisSysLevelxOrigLSPBuffSize
         supported by the system.
         
         If resources allow, we will store and flood LSPs
         larger than prvtIsisSysReceiveLSPBufferSize, as this
         can help avoid problems in networks with different
         values for prvtIsisSysLevelxOrigLSPBuffSize."
    ::= { prvtIsisSysEntry 13 }

prvtIsisSysOperStatus OBJECT-TYPE
    SYNTAX      PrvtIsisOperStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The current operational status of this instance of the
         Protocol Manager component of IS-IS.
         
         Note that IS-IS can only activate if there is at least
         one active entry in the prvtIsisManAreaAddrTable."
    ::= { prvtIsisSysEntry 14 }

prvtIsisSysAllowAutoI3Config OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "If 'true' then add IP addresses received from the I3 stub
         to the prvtIsisCircIPAddrTable with admin state 'on'. If
         'false' then add them with admin state 'off'. This field
         follows the ReplaceOnlyWhileDisabled behavior."
    ::= { prvtIsisSysEntry 15 }

prvtIsisSysCalcMaxDelay OBJECT-TYPE
    SYNTAX      Unsigned32 (0..120000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The maximum delay before the Routing Table is
         recalculated following a change to the Link State
         Database. (Recalculation is delayed to reduce the
         frequency of recalculations of the Routing Table).
         
         This parameter has units of milliseconds. A value of
         0 indicates that a routing calculation will
         immediately follow an update to the database."
    ::= { prvtIsisSysEntry 16 }

prvtIsisSysCalcThrshUpdStart OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This parameter can be used to override the routing
         calculation delay indicated by the prvtIsisSysCalcMaxDelay
         parameter when the number of updates to the Link State
         Database reaches a threshold value.
         
         This parameter specifies the threshold number of updates
         that can be made to the Link State Database such that any
         subsequent update to the database causes a full routing
         calculation to start immediately.
         
         - 0 indicates that a routing calculation will immediately
         follow an update to the database.
         
         - 0xFFFFFFFF indicates that this threshold is infinite, and
         hence the timing of a routing calculation is determined
         solely by the configured calculation delay."
    ::= { prvtIsisSysEntry 17 }

prvtIsisSysCalcThrshUpdRestart OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This parameter can be used to interrupt a full routing
         calculation when the number of pending updates to the Link
         State Database has reached a threshold value.
         
         This parameter specifies the threshold number of updates
         that can be made to the Link State Database such that any
         subsequent update to the database causes the current
         routing calculation to be interrupted, and a new
         calculation to start using an up to date Link State
         Database.
         
         - 0 indicates that an update to the Link State Database
         will cause any current routing calculation to be
         interrupted and a new one to start.
         
         - 0xFFFFFFFF indicates that this threshold is infinite, and
         hence no number of pending updates to the database will
         cause a routing calculation to be interrupted."
    ::= { prvtIsisSysEntry 18 }

prvtIsisSysCalcThrshRestartLimit OBJECT-TYPE
    SYNTAX      Unsigned32 (1..4294967295)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This parameter limits the number of consecutive times a
         routing calculation can be interrupted by new updates.
         This guarantees that the routing calculation will actually
         complete.
         
         - 1 indicates that once a calculation has been interrupted
         once, it will not be interrupted again.
         
         - 0xFFFFFFFF indicates that the calculation can always be
         interrupted."
    ::= { prvtIsisSysEntry 19 }

prvtIsisSysCalcPauseFreq OBJECT-TYPE
    SYNTAX      Unsigned32 (0..4294967295)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This value determines how regularly a Routing Calculation
         is paused. It is measured in points.  The points scale
         roughly maps to a time scale, so that the larger this value
         is, the longer the Routing Calculation runs before pausing.
         
         - 0 indicates that the routing calculation is paused after
         every calculation step.
         
         - 0xFFFFFFFF indicates that the Routing Calculation is
         never paused."
    ::= { prvtIsisSysEntry 20 }

prvtIsisSysCheckChecksums OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This value determines how often the checksums of LSPs in
         the Link State Database are checked. If 0, no checksums
         in the database are checked."
    ::= { prvtIsisSysEntry 21 }

prvtIsisSysZeroAgeLifetime OBJECT-TYPE
    SYNTAX      Integer32
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This is the minimum amount of time in seconds for which the
         header of an expired LSP shall be retained after it has
         been flooded with zero Remaining Lifetime. All that is
         required is that the header be retained until the zero
         Remaining Lifetime LSP has been safely propagated to all
         the neighbors."
    ::= { prvtIsisSysEntry 22 }

prvtIsisSysNumUpdPending OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The number of updates that are pending addition to the Link
         State Database."
    ::= { prvtIsisSysEntry 23 }

prvtIsisSysNumUpdMerged OBJECT-TYPE
    SYNTAX      Counter32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The number of updates that have been merged into the Link
         State Database since the last routing calculation."
    ::= { prvtIsisSysEntry 24 }

prvtIsisSysNumCksumsPending OBJECT-TYPE
    SYNTAX      Gauge32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The number of LSPs in the Link State Database which are now
         due to have their checksum checked."
    ::= { prvtIsisSysEntry 25 }

prvtIsisSysTEMetricPcntge OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The Traffic Engineering metric is updated in real-time by
         the I3 Stub. In order to increase performance and reduce
         network traffic, this parameter determines the minimal
         percentage change of the TE metric that causes a new LSP
         to be originated."
    ::= { prvtIsisSysEntry 26 }

prvtIsisSysMaxBwidthPcntge OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The maximum bandwidth on an interface is updated in
         real-time by the I3 Stub. In order to increase performance
         and reduce network traffic, this parameter determines the
         minimal percentage change of maximum bandwidth that causes
         a new LSP to be originated."
    ::= { prvtIsisSysEntry 27 }

prvtIsisSysMaxResBwidthPcntge OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The maximum reservable bandwidth on an interface is updated
         in real-time by the I3 Stub. In order to increase
         performance and reduce network traffic, this parameter
         determines the minimal percentage change of maximum
         reservable bandwidth that causes a new LSP to be
         originated."
    ::= { prvtIsisSysEntry 28 }

prvtIsisSysUnresBwidthPcntge OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The unreserved bandwidth on an interface is updated in
         real-time by the I3 Stub. In order to increase performance
         and reduce network traffic, this parameter determines the
         minimal percentage change of unreserved bandwidth that
         causes a new LSP to be originated."
    ::= { prvtIsisSysEntry 29 }

prvtIsisSysMaxLSPBwidthPcntge OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The maximum LSP bandwidth for the various switching
         descriptors on an interface is updated in real-time by the
         I3 Stub. In order to increase performance and reduce
         network traffic, this parameter determines the minimal
         percentage change of maximum LSP bandwidth that causes a
         new LSP to be originated."
    ::= { prvtIsisSysEntry 30 }

prvtIsisSysMinLSPBwidthPcntge OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The minimum LSP bandwidth for the various switching
         descriptors on an interface is updated in real-time by the
         I3 Stub. In order to increase performance and reduce
         network traffic, this parameter determines the minimal
         percentage change of minmimum LSP bandwidth that causes a
         new LSP to be originated."
    ::= { prvtIsisSysEntry 31 }

prvtIsisSysMTUSizePcntge OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The Maximum Transmission Unit size for the various
         switching descriptors on an interface is updated in
         real-time by the I3 Stub. In order to increase performance
         and reduce network traffic, this parameter determines the
         minimal percentage change of the Maximum Transmission Unit
         that causes a new LSP to be originated."
    ::= { prvtIsisSysEntry 32 }

prvtIsisSysTERouterID OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The Local IPv4 TE Router ID. This is a single stable IPv4
         address that can always be referenced in a path that will
         be reachable from multiple hops away, regardless of the
         state of the node's interfaces.
         
         This field is ignored if prvtIsisSysLevelxTEEnabled is 'false'."
    ::= { prvtIsisSysEntry 33 }

prvtIsisSysIPv6TERouterID OBJECT-TYPE
    SYNTAX      PrvtIsisIPv6Address
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The Local IPv6 TE Router ID. This is a single stable IPv6
         global address that can always be referenced in a path that
         will be reachable from multiple hops away, regardless of
         the state of the node's interfaces.
         
         This field is ignored if prvtIsisSysLevelxIPv6TEEnabled is
         'false'."
    ::= { prvtIsisSysEntry 34 }

prvtIsisSysMaxExternalRoutes OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The maximum number of static routes and routes
         redistributed from other protocols that will be accepted.
         
         The action that will be taken when the maximum is
         exceeded is controlled by prvtIsisSysMaxExternalRoutesAct.
         
         0xFFFFFFFF is a special value indicating that the threshold
         is infinite."
    ::= { prvtIsisSysEntry 35 }

prvtIsisSysMaxExternalRoutesAct OBJECT-TYPE
    SYNTAX      INTEGER { log(1), suppressExternal(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The action that will be take whenn the number of
         external routes exceeds prvtIsisSysMaxExternalRoutes.
         
         If set to 'log', IS-IS will alert the administrator by
         logging that the limit has been exceeded.
         
         If set to 'suppressExternal', IS-IS will remove all
         external routes from the local LSP (at all active levels)
         in addition to logging the problem.
         
         In both cases, the administrator is responsible for
         correcting the configuration to reduce the number of
         redistributed external routes.
         
         In the 'suppressExternal' case, the system
         is responsible for resynchronizing the set of routes with
         IS-IS."
    ::= { prvtIsisSysEntry 36 }

prvtIsisSysLspFullSuppress OBJECT-TYPE
    SYNTAX      INTEGER { external(1), none(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The set of routes (if any) that will be removed from the
         local LSP when the local LSP becomes full at
         either level.
         
         When set to 'external', all static routes and routes
         redistributed from other protocols will be removed from the
         local LSP (at all active levels) when the local LSP is
         full.
         
         If set to 'none', IS-IS will be unable to accept any
         additional configuration that may increase the size of the
         local LSP.
         
         The system administrator should modify the system
         configuration to reduce the local LSP size - for example,
         by reducing the number of addresses redistributed from
         other routing protocols, or by deleting circuit
         configuration.
         
         Once this has been done, if prvtIsisSysLspFullSuppress is set
         to 'external', the system is responsible
         for resynchronizing the set of routes with ISIS."
    ::= { prvtIsisSysEntry 37 }

prvtIsisSysLspFullSetDBOL OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "If set to 'true', the database overload flag will be set
         in the local LSP (at all active levels) when the local
         LSP becomes full (at either level).
         
         The administrator can clear the database overload flag for
         a level by setting prvtIsisSysLevelxSetOverload to 'false' for
         that level."
    ::= { prvtIsisSysEntry 38 }

prvtIsisSysRestartHelpPeer OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Indicates if the procedures defined in the IS-IS restart
         RFC (3847) for helping a peer to restart is implemented.
         
         Note that this object has no effect on the local restart
         behavior, and so may be set independently of
         prvtIsisSysRestartActivationType and
         prvtIsisSysRestartAutoResetType."
    ::= { prvtIsisSysEntry 39 }

prvtIsisSysRestartActivationType OBJECT-TYPE
    SYNTAX      PrvtIsisSysRestartType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This object is only used when IS-IS is manually activated
         or deactivated (in other words, enters or leaves the state
         with row status 'active' and admin status 'on'), and
         indicates which restart procedures (if any) are followed.
         
         During the activation period, IS-IS will use the value
         that was configured at the start of activation. The value
         may be changed at any time, but the new value will only
         take effect the next time that manual activation takes
         place.
         
         During deactivation, IS-IS will purge the local LSP from
         remote nodes if this object is set to 'none' or 'start'.
         Setting the object to 'restart' before deactivation will
         prevent the local LSP from being purged.
         
         A planned restart may be initiated by setting
         prvtIsisSysShutdown to 'true' and later to 'false'. Graceful
         restart procedures will only function correctly if the
         local LSP has not been purged, and so to initiate a planned
         restart, prvtIsisSysRestartActivationType should be set to
         'restart' before deactivation."
    ::= { prvtIsisSysEntry 40 }

prvtIsisSysRestartAutoResetType OBJECT-TYPE
    SYNTAX      PrvtIsisSysRestartType
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "There are cases where the IS-IS protocol requires the local
         node to automatically deactivate and later reactivate.
         This object indicates which restart procedures (if any) are
         followed during such an automatic reset.
         
         During the activation period, IS-IS will use the value
         that was configured at the start of activation. The value
         may be changed at any time, but the new value will only
         take effect the next time that automatic re-activation
         takes place."
    ::= { prvtIsisSysEntry 41 }

prvtIsisSysRestartAdjacencyWait OBJECT-TYPE
    SYNTAX      Integer32 (1..3600)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This object is only used when IS-IS activates with
         the activation type (prvtIsisSysRestartActivationType or
         prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
         
         It defines how long IS-IS will wait to establish
         adjacencies before completing the start/restart.
         
         This object follows the ResettingTimer behavior."
    ::= { prvtIsisSysEntry 42 }

prvtIsisSysMaxRecoveryTime OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This object is only used when IS-IS activates with
         the activation type (prvtIsisSysRestartActivationType or
         prvtIsisSysRestartAutoResetType) set to 'restart'.
         
         It defines the maximum time that IS-IS will take before
         completing restart procedures.
         
         The value specified puts an upper bound on the duration of
         the T3 timer described in the IS-IS restart RFC (3847).
         The actual duration of the timer is the minimum of the value
         specified and the minimum remaining holding time received
         on an adjacency.
         
         This object follows the ResettingTimer behavior."
    ::= { prvtIsisSysEntry 43 }

prvtIsisSysClearStats OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set to 'true' to clear all system statistics, including the
         prvtIsisSystemCounter and prvtIsisPacketCounter tables.
         
         Note that prvtIsisSysStatsLSPCount is not reset by this object.
         
         Reading the value of this field has no meaning."
    ::= { prvtIsisSysEntry 44 }

prvtIsisSysSetAttached OBJECT-TYPE
    SYNTAX      INTEGER { attachNoOverlapOrRedist(1), 
                    attachNoOverlapOnly(2), attachSet(3), attachClear(4) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "If IS-IS is operating at both level 1 and level 2, this
         field indicates how IS-IS should decide whether to set the
         attached bit in its level 1 LSP.
         
         - 'attachNoOverlapOrRedist' indicates that the attached bit
         should be set if either of the following are true.
         - The IS can reach at least one other area (the IS is
         adjacent with a L2 router whose area addresses do not
         overlap with the area addresses we know about at L1).
         - The IS is redistributing one or more external routes
         into the AS.
         
         - 'attachNoOverlapOnly' indicates that the attached bit
         should be set only if the IS can reach at least one other
         area.
         
         - 'attachSet' indicates that the attached bit should always
         be set.
         
         - 'attachClear' indicates that the attached bit should
         never be set."
    ::= { prvtIsisSysEntry 45 }

prvtIsisSysProtSupported OBJECT-TYPE
    SYNTAX      BITS { reserved(0), ipv4(1), ipv6(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This attribute contains the set of protocols supported by
         this Intermediate System."
    ::= { prvtIsisSysEntry 46 }

prvtIsisSysRstrctLanAdjsToSubnet OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This object only affects IPv4 broadcast circuits. If this
         is set to 'true', IS-IS will only form adjacencies with
         intermediate systems that are on the same subnet as the
         local circuit. This object only has effect when the I3
         Stub is used to determine subnet addresses and is ignored
         otherwise."
    ::= { prvtIsisSysEntry 47 }

prvtIsisSysHostName OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The string that this instance of IS-IS will use as the
         local hostname.
         
         This is advertised to other Intermediate Systems in the
         Dynamic Hostname TLV."
    ::= { prvtIsisSysEntry 48 }

prvtIsisSysCalcSoonAfterCircChng OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Set this object to 'true' to minimize the delay before
         triggering a routing calculation that includes any
         relevant circuit change. This means a change to the local
         neighbors (including pseudonodes), or to the reachable
         addresses received from the I3 stub.
         
         There are two aspects to minimizing the delay.
         
         - IS-IS overrides the setting of the
         prvtIsisSysLevelMinLSPGenInt object when such a change
         occurs, and usually regenerates the local LSP(s)
         immediately. The only exception is when IS-IS is
         performing restart procedures as defined in RFC3847.
         This RFC specifies when IS-IS can update the local
         LSP during a restart.
         
         - IS-IS overrides all of the objects that affect the
         scheduling of routing calculations, with the exception
         of the prvtIsisSysCalcThrshRestartLimit object. It ensures
         that a routing calculation including the updated LSPs
         takes place as soon as possible. It abandons an
         existing route calculation if necessary, unless more
         than prvtIsisSysCalcThrshRestartLimit successive
         calculations would have been interrupted."
    ::= { prvtIsisSysEntry 49 }

prvtIsisSysSendNotifications OBJECT-TYPE
    SYNTAX      BITS { circuitIndication(0), databaseOverload(1), 
                    manualAreaAddressDrops(2), idLengthMismatch(3), 
                    maxAreaAddressMismatch(4), ownLspPurge(5), 
                    areaMismatch(6), rejectedAdjacency(7), 
                    adjacencyChange(8), lspErrorDetected(9) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This attribute contains the set of notifications generated
         by this Intermediate System.
         
         The notifications that may be enabled are the prvtIsisCircIndTable,
         prvtIsisDatabaseOverload, prvtIsisManualAddressDrops, prvtIsisIDLenMismatch,
         prvtIsisMaxAreaAddressesMismatch, prvtIsisOwnLSPPurge, prvtIsisAreaMismatch,
         prvtIsisRejectedAdjacency, prvtIsisAdjacencyChange and
         prvtIsisLSPErrorDetected notifications."
    ::= { prvtIsisSysEntry 50 }

prvtIsisSysLvl1OrigLSPBuffSize OBJECT-TYPE
    SYNTAX      PrvtIsisLSPBuffSize
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The maximum size of LSPs and SNPs originated by
         this Intermediate System at level 1.
         This object follows the ReplaceOnlyWhileDisabled
         behavior."
    REFERENCE   
        "{ISIS.aoi originatingL1LSPBufferSize (9)}"
    ::= { prvtIsisSysEntry 60 }

prvtIsisSysLvl1MinLSPGenInt OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16NoZeroTC
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Minimum interval, in seconds, between successive
         generation of LSPs with the same LSPID at level 1
         by this instance of the protocol. This object
         follows the ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi minimumLSPGenerationInterval (11)}"
    ::= { prvtIsisSysEntry 61 }

prvtIsisSysLvl1OverloadState OBJECT-TYPE
    SYNTAX      PrvtIsisLevelState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The Overload state of the database at level 1.
         The value 'overloaded' indicates a database that is
         low on an essential resource, such as memory.
         The administrator may indirectly force the state to
         'waiting' when the router is initializing by setting
         the object prvtIsisSysLvl1SetOverload.
         If the state is waiting or overloaded, we
         originate LSPs with the Overload bit set."
    REFERENCE   
        "{ISIS.aoi l1State (17)}"
    ::= { prvtIsisSysEntry 62 }

prvtIsisSysLvl1SetOverload OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Administratively set the overload bit for the level.
         The overload bit will continue to be set if the
         implementation runs out of memory, independent of
         this variable."
    ::= { prvtIsisSysEntry 63 }

prvtIsisSysLvl1SetOverloadUntil OBJECT-TYPE
    SYNTAX      TimeTicks
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "If set, the overload bit should be set, and cleared
         after sysUpTime exceeds this value."
    ::= { prvtIsisSysEntry 64 }

prvtIsisSysLvl1MetricStyle OBJECT-TYPE
    SYNTAX      PrvtIsisMetricStyle
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Which style of Metric do we generate in our LSPs
         at level 1 ?"
    ::= { prvtIsisSysEntry 65 }

prvtIsisSysLvl1SPFConsiders OBJECT-TYPE
    SYNTAX      PrvtIsisMetricStyle
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Which style of Metric do we consider in our
         SPF computation at level 1 ?"
    ::= { prvtIsisSysEntry 66 }

prvtIsisSysLvl1TEEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Do we do Traffic Engineering for IPv4 at level 1 ?
         
         Currently only Traffic Engineering at L1 is supported.
         
         If Traffic Engineering is enabled, prvtIsisSysLvl1MetricStyle
         must be set to 'wide' or 'both', and a value must be
         configured for prvtIsisSysTERouterID.
         
         When Traffic Engineering is enabled for IPv4, this IS will
         advertise the IPv4 TE router ID in the local LSP, and will
         advertise traffic engineering parameters (where available)
         for links configured to support IPv4.
         
         This object is ignored if the 'ipv4' bit is not set in the
         value of prvtIsisSysProtSupported."
    ::= { prvtIsisSysEntry 67 }

prvtIsisSysLvl1IPv6TEEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Do we do Traffic Engineering for IPv6 at level 1 ?
         
         Currently only Traffic Engineering at L1 is supported.
         
         If Traffic Engineering is enabled, a value must be
         configured for prvtIsisSysIPv6TERouterID.
         
         When Traffic Engineering is enabled for IPv6, this IS will
         advertise the IPv6 TE router ID in the local LSP, and will
         advertise traffic engineering parameters (where available)
         for links configured to support IPv6.
         
         This object is ignored if the 'ipv6' bit is not set in the
         value of prvtIsisSysProtSupported."
    ::= { prvtIsisSysEntry 68 }

prvtIsisSysLvl1RestartT2Duration OBJECT-TYPE
    SYNTAX      Integer32 (1..3600)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This object is only used when IS-IS activates with
         the activation type (prvtIsisSysRestartActivationType or
         prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
         
         It defines how long IS-IS will wait to complete database
         synchronization at level 1 before completing the
         start/restart.
         
         This object follows the ResettingTimer behavior."
    ::= { prvtIsisSysEntry 69 }

prvtIsisSysLvl1AuthUser OBJECT-TYPE
    SYNTAX      PrvtIsisAuthUserDataString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Authentication user data for area/domain level
         authentication.
         
         This data is passed opaquely to the authentication
         interface where it can be used to assist with
         authentication decisions."
    ::= { prvtIsisSysEntry 70 }

prvtIsisSysLvl2OrigLSPBuffSize OBJECT-TYPE
    SYNTAX      PrvtIsisLSPBuffSize
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The maximum size of LSPs and SNPs originated by
         this Intermediate System at level 2.
         This object follows the ReplaceOnlyWhileDisabled
         behavior."
    REFERENCE   
        "{ISIS.aoi originatingL1LSPBufferSize (9)}"
    ::= { prvtIsisSysEntry 80 }

prvtIsisSysLvl2MinLSPGenInt OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16NoZeroTC
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Minimum interval, in seconds, between successive
         generation of LSPs with the same LSPID at level 2
         by this instance of the protocol. This object
         follows the ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi minimumLSPGenerationInterval (11)}"
    ::= { prvtIsisSysEntry 81 }

prvtIsisSysLvl2OverloadState OBJECT-TYPE
    SYNTAX      PrvtIsisLevelState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The Overload state of the database at level 2.
         The value 'overloaded' indicates a database that is
         low on an essential resource, such as memory.
         The administrator may indirectly force the state to
         'waiting' when the router is initializing by setting
         the object prvtIsisSysLvl2SetOverload.
         If the state is waiting or overloaded, we
         originate LSPs with the Overload bit set."
    REFERENCE   
        "{ISIS.aoi l1State (17)}"
    ::= { prvtIsisSysEntry 82 }

prvtIsisSysLvl2SetOverload OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Administratively set the overload bit for the level.
         The overload bit will continue to be set if the
         implementation runs out of memory, independent of
         this variable."
    ::= { prvtIsisSysEntry 83 }

prvtIsisSysLvl2SetOverloadUntil OBJECT-TYPE
    SYNTAX      TimeTicks
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "If set, the overload bit should be set, and cleared
         after sysUpTime exceeds this value."
    ::= { prvtIsisSysEntry 84 }

prvtIsisSysLvl2MetricStyle OBJECT-TYPE
    SYNTAX      PrvtIsisMetricStyle
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Which style of Metric do we generate in our LSPs
         at level 2 ?"
    ::= { prvtIsisSysEntry 85 }

prvtIsisSysLvl2SPFConsiders OBJECT-TYPE
    SYNTAX      PrvtIsisMetricStyle
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Which style of Metric do we consider in our
         SPF computation at level 2 ?"
    ::= { prvtIsisSysEntry 86 }

prvtIsisSysLvl2TEEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Do we do Traffic Engineering for IPv4 at level 2 ?
         
         Currently only Traffic Engineering at L1 is supported.
         
         If Traffic Engineering is enabled, prvtIsisSysLvl2MetricStyle
         must be set to 'wide' or 'both', and a value must be
         configured for prvtIsisSysTERouterID.
         
         When Traffic Engineering is enabled for IPv4, this IS will
         advertise the IPv4 TE router ID in the local LSP, and will
         advertise traffic engineering parameters (where available)
         for links configured to support IPv4.
         
         This object is ignored if the 'ipv4' bit is not set in the
         value of prvtIsisSysProtSupported."
    ::= { prvtIsisSysEntry 87 }

prvtIsisSysLvl2IPv6TEEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Do we do Traffic Engineering for IPv6 at level 2 ?
         
         Currently only Traffic Engineering at L1 is supported.
         
         If Traffic Engineering is enabled, a value must be
         configured for prvtIsisSysIPv6TERouterID.
         
         When Traffic Engineering is enabled for IPv6, this IS will
         advertise the IPv6 TE router ID in the local LSP, and will
         advertise traffic engineering parameters (where available)
         for links configured to support IPv6.
         
         This object is ignored if the 'ipv6' bit is not set in the
         value of prvtIsisSysProtSupported."
    ::= { prvtIsisSysEntry 88 }

prvtIsisSysLvl2RestartT2Duration OBJECT-TYPE
    SYNTAX      Integer32 (1..3600)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This object is only used when IS-IS activates with
         the activation type (prvtIsisSysRestartActivationType or
         prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
         
         It defines how long IS-IS will wait to complete database
         synchronization at level 2 before completing the
         start/restart.
         
         This object follows the ResettingTimer behavior."
    ::= { prvtIsisSysEntry 89 }

prvtIsisSysLvl2AuthUser OBJECT-TYPE
    SYNTAX      PrvtIsisAuthUserDataString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Authentication user data for area/domain level
         authentication.
         
         This data is passed opaquely to the authentication
         interface where it can be used to assist with
         authentication decisions."
    ::= { prvtIsisSysEntry 90 }

prvtIsisManAreaAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisManAreaAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The set of manual area addresses configured on this
         Intermediate System."
    REFERENCE   
        "{ISIS.aoi manualAreaAddresses (10)}"
    ::= { prvtIsisSystem 2 }

prvtIsisManAreaAddrEntry OBJECT-TYPE
    SYNTAX      PrvtIsisManAreaAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry contains one area address manually configured
         on this system"
    INDEX       { prvtIsisSysInstance, prvtIsisManAreaAddr }
    ::= { prvtIsisManAreaAddrTable 1 }

PrvtIsisManAreaAddrEntry ::= SEQUENCE {
    prvtIsisManAreaAddr             PrvtIsisOSINSAddress,
    prvtIsisManAreaAddrExistState   RowStatus
}

prvtIsisManAreaAddr OBJECT-TYPE
    SYNTAX      PrvtIsisOSINSAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "A manually configured area address for this system. This
         object follows the index behavior.
         The area address must have a non-zero length."
    ::= { prvtIsisManAreaAddrEntry 1 }

prvtIsisManAreaAddrExistState OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The existence state (RowStatus) of the prvtIsisManAreaAddrEntry"
    ::= { prvtIsisManAreaAddrEntry 2 }

prvtIsisAreaAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisAreaAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The union of the sets of area addresses reported in all
         Level 1 LSPs with segment number zero received by this
         instance of the protocol from Intermediate Systems which
         are reachable via Level 1 routing."
    REFERENCE   
        "{ISIS.aoi areaAddresses (18)}"
    ::= { prvtIsisSystem 3 }

prvtIsisAreaAddrEntry OBJECT-TYPE
    SYNTAX      PrvtIsisAreaAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry contains one area address reported in a
         Level 1 LSP received by this instance of the IS-IS
         protocol.
         
         Received area addresses with a length of zero are
         ignored."
    INDEX       { prvtIsisSysInstance, prvtIsisAreaAddr }
    ::= { prvtIsisAreaAddrTable 1 }

PrvtIsisAreaAddrEntry ::= SEQUENCE {
    prvtIsisAreaAddr        PrvtIsisOSINSAddress,
    prvtIsisAreaAddrInLSP   TruthValue
}

prvtIsisAreaAddr OBJECT-TYPE
    SYNTAX      PrvtIsisOSINSAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An area address reported in a Level 1 LSP received by
         this instance of the IS-IS protocol.
         
         Received area addresses with a length of zero are
         ignored."
    ::= { prvtIsisAreaAddrEntry 1 }

prvtIsisAreaAddrInLSP OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Following ISO10589 section 7.1.5, we advertise the three
         numerically lowest level 1 area addresses in the level 2
         LSP fragment zero.
         
         If 'true', then this area address is one of the three
         numerically lowest area addresses, and if this router is
         active at level 2, it is therefore one of those area
         addresses advertised in the level 2 LSP fragment 0."
    ::= { prvtIsisAreaAddrEntry 2 }

prvtIsisSummAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisSummAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The set of IP summary addresses to use in forming
         summary TLVs originated by this Intermediate System.
         
         An administrator may use a summary address to combine
         and modify IP Reachability announcements. If the
         Intermediate system can reach any subset of the summary
         address, the summary address will be announced instead,
         at the configured metric."
    ::= { prvtIsisSystem 5 }

prvtIsisSummAddrEntry OBJECT-TYPE
    SYNTAX      PrvtIsisSummAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry contains one IP summary address."
    INDEX       { prvtIsisSysInstance, prvtIsisSummAddress }
    ::= { prvtIsisSummAddrTable 1 }

PrvtIsisSummAddrEntry ::= SEQUENCE {
    prvtIsisSummAddress         OCTET STRING,
    prvtIsisSummAddrExistState  RowStatus,
    prvtIsisSummAddrMetric      PrvtIsisDefaultMetric,
    prvtIsisSummAddrFullMetric  PrvtIsisFullMetric
}

prvtIsisSummAddress OBJECT-TYPE
    SYNTAX      OCTET STRING (SIZE(5))
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The IP address and prefix length value for this summary address."
    ::= { prvtIsisSummAddrEntry 2 }

prvtIsisSummAddrExistState OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The existence state (RowStatus) of this summary address."
    ::= { prvtIsisSummAddrEntry 4 }

prvtIsisSummAddrMetric OBJECT-TYPE
    SYNTAX      PrvtIsisDefaultMetric
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The metric value to announce this summary
         address within LSPs generated by this system."
    ::= { prvtIsisSummAddrEntry 5 }

prvtIsisSummAddrFullMetric OBJECT-TYPE
    SYNTAX      PrvtIsisFullMetric
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The wide metric value to announce this summary
         address within LSPs generated by this system."
    ::= { prvtIsisSummAddrEntry 6 }

prvtIsisRedistributeTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisRedistributeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The table represents the routing protocols redistributed into
         the IS-IS routing domain.
         
         Creation of conceptual row in the table starts the redistribution of the
         specified protocol, which would lead to the injection of routing information
         from that protocol into IS-IS.
         
         Deletion of conceptual row would stop the redistribution of that protocol
         into the IS-IS."
    ::= { prvtIsisSystem 10 }

prvtIsisRedistributeEntry OBJECT-TYPE
    SYNTAX      PrvtIsisRedistributeEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An entry into the prvtIsisRedistributeTable."
    INDEX       { prvtIsisSysInstance, prvtIsisRedistributeProtocol }
    ::= { prvtIsisRedistributeTable 1 }

PrvtIsisRedistributeEntry ::= SEQUENCE {
    prvtIsisRedistributeProtocol    INTEGER,
    prvtIsisRedistributeRowStatus   RowStatus,
    prvtIsisRedistributeLevel       INTEGER,
    prvtIsisRedistributeMetric      Integer32
}

prvtIsisRedistributeProtocol OBJECT-TYPE
    SYNTAX      INTEGER { kernel(2), connect(3), static(4), default(17) }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The specific routes redistributed into IS-IS."
    ::= { prvtIsisRedistributeEntry 1 }

prvtIsisRedistributeRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Indicates the status of the row.
         
         Setting of this field to active enables the redistribution of the protocol.
         Setting this field to destroy disables the redistribution of the protocol."
    ::= { prvtIsisRedistributeEntry 2 }

prvtIsisRedistributeLevel OBJECT-TYPE
    SYNTAX      INTEGER { level1(1), level2(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The IS-IS level at which this row applies to."
    ::= { prvtIsisRedistributeEntry 3 }

prvtIsisRedistributeMetric OBJECT-TYPE
    SYNTAX      Integer32 (0..63)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The IS-IS protocol metric to assign to the redistributed route."
    ::= { prvtIsisRedistributeEntry 4 }

prvtIsisCirc OBJECT IDENTIFIER
    ::= { prvtIsisMIBObjects 3 }

prvtIsisCircTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisCircEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The table of circuits used by each instance of
         Integrated IS-IS on this system."
    ::= { prvtIsisCirc 2 }

prvtIsisCircEntry OBJECT-TYPE
    SYNTAX      PrvtIsisCircEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An prvtIsisCircEntry exists for each circuit used by
         Integrated IS-IS on this system."
    INDEX       { prvtIsisSysInstance, prvtIsisCircIfIndex }
    ::= { prvtIsisCircTable 1 }

PrvtIsisCircEntry ::= SEQUENCE {
    prvtIsisCircIfIndex                 InterfaceIndex,
    prvtIsisCircExistState              RowStatus,
    prvtIsisCircIfSubIndex              Integer32,
    prvtIsisCircShutdown                TruthValue,
    prvtIsisCircType                    INTEGER,
    prvtIsisCircExtDomain               TruthValue,
    prvtIsisCircLevel                   INTEGER,
    prvtIsisCircPassiveCircuit          TruthValue,
    prvtIsisCircMeshGroupEnabled        INTEGER,
    prvtIsisCircMeshGroup               Unsigned32,
    prvtIsisCircSmallHellos             TruthValue,
    prvtIsisCircLastUpTime              TimeTicks,
    prvtIsisCirc3WayEnabled             TruthValue,
    prvtIsisCircExtendedCircID          Unsigned32,
    prvtIsisCircOperState               PrvtIsisOperStatus,
    prvtIsisCircSdEntityIndex           Integer32,
    prvtIsisCircDlBuffPoolSize          Unsigned32,
    prvtIsisCircSdPDUBuffPoolSize       Unsigned32,
    prvtIsisCircSdIndBuffPoolSize       Unsigned32,
    prvtIsisCircDataLinkBlockSize       Unsigned32,
    prvtIsisCircPhysicalAddress         OCTET STRING,
    prvtIsisCircManualOrAutomatic       INTEGER,
    prvtIsisCircT1TimerRunning          TruthValue,
    prvtIsisCircProtSupported           BITS,
    prvtIsisCircPtToPtOverLAN           TruthValue,
    prvtIsisCircLvl1Metric              PrvtIsisDefaultMetric,
    prvtIsisCircLvl1WideMetric          PrvtIsisWideMetric,
    prvtIsisCircLvl1ISPriority          PrvtIsisISPriority,
    prvtIsisCircLvl1IDOctet             Integer32,
    prvtIsisCircLvl1ID                  PrvtIsisCircuitID,
    prvtIsisCircLvl1DesIS               PrvtIsisCircuitID,
    prvtIsisCircLvl1HelloMultiplier     Integer32,
    prvtIsisCircLvl1HelloTimer          Integer32,
    prvtIsisCircLvl1DRHelloTimer        Integer32,
    prvtIsisCircLvl1LSPThrottle         PrvtIsisUnsigned16NoZeroTC,
    prvtIsisCircLvl1MinLSPRetransInt    Integer32,
    prvtIsisCircLvl1CSNPInterval        Integer32,
    prvtIsisCircLvl1PartSNPInterval     Integer32,
    prvtIsisCircLvl1StickyDIS           Integer32,
    prvtIsisCircLvl1AuthUser            PrvtIsisAuthUserDataString,
    prvtIsisCircLvl1IDHostname          PrvtIsisHostName,
    prvtIsisCircLvl1DesISHostname       PrvtIsisHostName,
    prvtIsisCircLvl2Metric              PrvtIsisDefaultMetric,
    prvtIsisCircLvl2WideMetric          PrvtIsisWideMetric,
    prvtIsisCircLvl2ISPriority          PrvtIsisISPriority,
    prvtIsisCircLvl2IDOctet             Integer32,
    prvtIsisCircLvl2ID                  PrvtIsisCircuitID,
    prvtIsisCircLvl2DesIS               PrvtIsisCircuitID,
    prvtIsisCircLvl2HelloMultiplier     Integer32,
    prvtIsisCircLvl2HelloTimer          Integer32,
    prvtIsisCircLvl2DRHelloTimer        Integer32,
    prvtIsisCircLvl2LSPThrottle         PrvtIsisUnsigned16NoZeroTC,
    prvtIsisCircLvl2MinLSPRetransInt    Integer32,
    prvtIsisCircLvl2CSNPInterval        Integer32,
    prvtIsisCircLvl2PartSNPInterval     Integer32,
    prvtIsisCircLvl2StickyDIS           Integer32,
    prvtIsisCircLvl2IDHostname          PrvtIsisHostName,
    prvtIsisCircLvl2DesISHostname       PrvtIsisHostName
}

prvtIsisCircIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The value of ifIndex for the interface to which this
         circuit corresponds. This object cannot be modified
         after creation.
         
         This is also used as the 3-way circuit ID on
         point-to-point circuits."
    ::= { prvtIsisCircEntry 2 }

prvtIsisCircExistState OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The existence state (RowStatus) of this circuit. Setting the
         state to 'notInService' halts the generation and processing of
         IS-IS protocol PDUs on this circuit. Setting the state
         to destroy will also erase any configuration associated
         with the circuit.
         
         Automatic circuits from the I3 stub appear as
         passive circuits with existence state 'active'. These
         circuits can be configured via the MIB like manual
         circuits, except that they will survive a Destroy request,
         with all fields reset to their automatic values.
         
         MIB configuration overrides automatic configuration."
    ::= { prvtIsisCircEntry 3 }

prvtIsisCircIfSubIndex OBJECT-TYPE
    SYNTAX      Integer32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "A specifier for the part of the interface ifIndex to which
         this circuit corresponds, such as a DLCI or VPI/VCI.
         This object cannot be modified after creation.
         
         This field is currently ignored."
    ::= { prvtIsisCircEntry 4 }

prvtIsisCircShutdown OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The administrative state of the circuit."
    ::= { prvtIsisCircEntry 5 }

prvtIsisCircType OBJECT-TYPE
    SYNTAX      INTEGER { unknown(0), broadcast(1), ptToPt(2), 
                    staticIn(3), staticOut(4), dA(5) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The type of the circuit. This object follows the
         ReplaceOnlyWhileDisabled behavior. The type specified
         must be compatible with the type of the interface defined
         by the value of prvtIsisCircIfIndex.
         
         Only 'broadcast' and 'ptToPt' circuits are currently
         supported. An automatic circuit can have type 'unknown'
         until the correct MIB type is defined."
    REFERENCE   
        "{ISIS.aoi type (33)}"
    ::= { prvtIsisCircEntry 6 }

prvtIsisCircExtDomain OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "If true, suppress normal transmission of and
         interpretation of Intra-domain IS-IS PDUs on this
         circuit."
    REFERENCE   
        "{ISIS.aoi externalDomain (46)}"
    ::= { prvtIsisCircEntry 7 }

prvtIsisCircLevel OBJECT-TYPE
    SYNTAX      INTEGER { level1(1), level2(2), level1L2(3) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Indicates which type of packets will be sent and
         accepted on this circuit. The values used will be
         modified by the settings of prvtIsisSysType. This
         object follows the ReplaceOnlyWhileDisabled behavior."
    ::= { prvtIsisCircEntry 8 }

prvtIsisCircPassiveCircuit OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Should we include this interface in LSPs, even if
         it is not running the IS-IS Protocol?
         
         Circuits with prvtIsisCircExtDomain 'true'
         will only be included in LSPs if this field is
         also 'true', and the circuit is active."
    ::= { prvtIsisCircEntry 9 }

prvtIsisCircMeshGroupEnabled OBJECT-TYPE
    SYNTAX      INTEGER { inactive(1), blocked(2), set(3) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Is this port a member of a mesh group, or blocked?
         Circuits in the same mesh group act as a virtual
         multiaccess network. LSPs seen on one circuit in
         a mesh group will not be flooded to another circuit
         in the same mesh group."
    REFERENCE   
        "{ RFC 2973 }"
    ::= { prvtIsisCircEntry 10 }

prvtIsisCircMeshGroup OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Circuits in the same mesh group act as a virtual
         multiaccess network. LSPs seen on one circuit in
         a mesh group will not be flooded to another circuit
         in the same mesh group. If prvtIsisCircMeshGroupEnabled
         is inactive or blocked, this value is ignored."
    REFERENCE   
        "{ RFC 2973 }"
    ::= { prvtIsisCircEntry 11 }

prvtIsisCircSmallHellos OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Can we send unpadded hellos on LAN circuits? False
         means LAN Hellos must be padded.
         
         Currently only unpadded hellos are supported."
    ::= { prvtIsisCircEntry 12 }

prvtIsisCircLastUpTime OBJECT-TYPE
    SYNTAX      TimeTicks
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "If the circuit is enabled, the value of sysUpTime
         when prvtIsisCircShutdown most recently entered
         the state on. If the circuit is not on,
         the value of sysUpTime when the circuit last
         entered state on, 0 if the circuit has never
         been on."
    ::= { prvtIsisCircEntry 13 }

prvtIsisCirc3WayEnabled OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Is this circuit enabled to run 3Way handshake?
         
         Currently the 3-way handshake on point to
         point circuits is always run."
    ::= { prvtIsisCircEntry 14 }

prvtIsisCircExtendedCircID OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The value to be used as the extended circuit ID in
         3Way handshake. This value is only used if
         prvtIsisCirc3WayEnabled is true, and must be unique across
         all circuits on this IS.
         
         Currently the value for prvtIsisCircIfIndex is used as the extended
         circuit ID."
    ::= { prvtIsisCircEntry 15 }

prvtIsisCircOperState OBJECT-TYPE
    SYNTAX      PrvtIsisOperStatus
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The operational state of this circuit."
    ::= { prvtIsisCircEntry 16 }

prvtIsisCircSdEntityIndex OBJECT-TYPE
    SYNTAX      Integer32 (0..2147483647)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Identifies the SDC entity which will handle this circuit.
         This object must be specified before the circuit can run the
         IS-IS protocol. It cannot be changed after it has been
         specified."
    ::= { prvtIsisCircEntry 17 }

prvtIsisCircDlBuffPoolSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Capacity of the buffer pool used by the DL stub to send
         data signals to the SDC. This object follows the
         ReplaceOnlyWhileDisabled behavior."
    ::= { prvtIsisCircEntry 18 }

prvtIsisCircSdPDUBuffPoolSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Capacity of the buffer pool into which SDC transfers data
         signals from the DL Stub. This object follows the
         ReplaceOnlyWhileDisabled behavior."
    ::= { prvtIsisCircEntry 19 }

prvtIsisCircSdIndBuffPoolSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Capacity of the buffer pool used by SDC to send
         indications to PM. This object follows the
         ReplaceOnlyWhileDisabled behavior."
    ::= { prvtIsisCircEntry 20 }

prvtIsisCircDataLinkBlockSize OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Maximum size of PDU that can be sent or received over this
         circuit (MTU). This object follows the
         ReplaceOnlyWhileDisabled behavior."
    ::= { prvtIsisCircEntry 21 }

prvtIsisCircPhysicalAddress OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The physical address of the network interface (for example
         a MAC address on an Ethernet card). This value is only
         relevant to a broadcast circuit and is ignored on a
         point-to-point circuit. It needs to be specified in the
         MIB if the information is not obtained from the I3 stub.
         
         This object follows the ReplaceOnlyWhileDisabled behavior."
    ::= { prvtIsisCircEntry 22 }

prvtIsisCircManualOrAutomatic OBJECT-TYPE
    SYNTAX      INTEGER { manual(1), automatic(2), both(3) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Has this circuit been configured by MIB (manual), I3
         information (automatic) or both? MIB configuration
         overrides I3 configuration.
         
         Automatic circuits cannot be destroyed. Destroying a
         manual circuit removes all configuration for that circuit.
         Destroying a circuit in state 'both'
         destroys any MIB configuration and returns the circuit to
         automatic state."
    ::= { prvtIsisCircEntry 23 }

prvtIsisCircT1TimerRunning OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Is the T1 timer running on this circuit?
         
         This object is only valid on a circuit that is currently
         running the IS-IS protocol (prvtIsisCircExtDomain is 'false'
         and prvtIsisCircOperState is 'operStatusUp').
         
         When set to 'true', this indicates that the local node is
         running starting or restarting node procedures."
    ::= { prvtIsisCircEntry 24 }

prvtIsisCircProtSupported OBJECT-TYPE
    SYNTAX      BITS { reserved(0), ipv4(1), ipv6(2) }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Which protocols are supported on this circuit?
         
         Note that the configured value is used in conjunction with
         the value of prvtIsisSysProtSupported. In particular:
         
         - IPv4 is supported on the circuit if both
         prvtIsisSysProtSupported and this object have the 'ipv4' bit
         set.
         
         - IPv6 is supported on the circuit if both
         prvtIsisSysProtSupported and this object have the 'ipv6' bit
         set."
    ::= { prvtIsisCircEntry 25 }

prvtIsisCircPtToPtOverLAN OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Allows a broadcast circuit to be configured to operate
         point-to-point over LAN procedures.
         
         This is used in conjunction with the prvtIsisCircType object
         as follows.
         
         - If prvtIsisCircType = 'ptToPt', the circuit is a standard
         point-point circuit, and prvtIsisCircPtToPtOverLAN is
         ignored.
         
         - If prvtIsisCircType = 'broadcast' and prvtIsisCircPtToPtOverLAN
         is 'false', the circuit is used as a normal LAN.
         
         - If prvtIsisCircType = 'broadcast' and prvtIsisCircPtToPtOverLAN
         is 'true', point-point over LAN procedures are
         followed.
         
         Point-to-point over LAN procedures should only be
         configured when there are just two Intermediate Systems
         operating on the LAN.
         
         This object follows the ReplaceOnlyWhileDisabled behavior."
    ::= { prvtIsisCircEntry 26 }

prvtIsisCircLvl1Metric OBJECT-TYPE
    SYNTAX      PrvtIsisDefaultMetric
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The metric value of this circuit for level 1."
    REFERENCE   
        "{ISIS.aoi l1DefaultMetric (35)}"
    ::= { prvtIsisCircEntry 30 }

prvtIsisCircLvl1WideMetric OBJECT-TYPE
    SYNTAX      PrvtIsisWideMetric
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The wide metric value of this circuit for level 1."
    ::= { prvtIsisCircEntry 31 }

prvtIsisCircLvl1ISPriority OBJECT-TYPE
    SYNTAX      PrvtIsisISPriority
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The priority for becoming the LAN-Designated
         Intermediate System at level 1."
    REFERENCE   
        "{ISIS.aoi l2IntermediateSystemPriority (73)}"
    ::= { prvtIsisCircEntry 32 }

prvtIsisCircLvl1IDOctet OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "A one byte identifier for the circuit selected by the
         Intermediate System.
         
         On point-to-point circuits, the value is used as the Local
         Circuit ID in point-to-point IIH PDUs transmitted on this
         circuit. In this case, values of prvtIsisCircLvl1IDOctet do
         not need to be unique.
         
         For broadcast circuits, the value is used to generate the
         LAN ID that will be used if this Intermediate System is
         elected as the Designated IS on this circuit. The value
         is required to differ on LANs where the Intermediate System
         is the Designated Intermediate System."
    ::= { prvtIsisCircEntry 33 }

prvtIsisCircLvl1ID OBJECT-TYPE
    SYNTAX      PrvtIsisCircuitID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "On a point to point circuit with a fully initialized
         adjacency to a peer IS, the value of this object is
         the circuit ID negotiated during adjacency initialization.
         On a point to point circuit without such an adjacency,
         the value is the concatenation of the local system ID
         and the one byte prvtIsisCircLvl1IDOctet for this circuit
         i.e. the value that would be proposed for the circuit ID.
         
         On other circuit types, the value returned is the zero
         length OCTET STRING."
    REFERENCE   
        "{ISIS.aoi ptPtCircuitID (51)}"
    ::= { prvtIsisCircEntry 34 }

prvtIsisCircLvl1DesIS OBJECT-TYPE
    SYNTAX      PrvtIsisCircuitID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The ID of the LAN-Designated Intermediate System
         on this circuit at level 1. If, for any reason,
         this system is not partaking in the relevant
         Designated Intermediate System election process,
         then the value returned is the zero length OCTET STRING."
    REFERENCE   
        "{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
    ::= { prvtIsisCircEntry 35 }

prvtIsisCircLvl1HelloMultiplier OBJECT-TYPE
    SYNTAX      Integer32 (2..100)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This value is multiplied by the corresponding HelloTimer
         and the result in seconds (rounded up) is used as the
         holding time in transmitted hellos, to be used by
         receivers of hello packets from this IS."
    REFERENCE   
        "{ISIS.aoi iSISHelloTimer (45)}"
    ::= { prvtIsisCircEntry 36 }

prvtIsisCircLvl1HelloTimer OBJECT-TYPE
    SYNTAX      Integer32 (10..600000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Maximum period, in milliseconds, between IIH PDUs
         on multiaccess networks at level 1 for LANs.
         The value at L1 is used as the period between
         Hellos on L1L2 point to point circuits. Setting
         this value at level 2 on an L1L2 point to point
         circuit will result in an error of InconsistentValue.
         
         This object follows the ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi iSISHelloTimer (45)}"
    ::= { prvtIsisCircEntry 37 }

prvtIsisCircLvl1DRHelloTimer OBJECT-TYPE
    SYNTAX      Integer32 (10..120000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Period, in milliseconds, between Hello PDUs on
         multiaccess networks when this IS is the Designated
         Intermediate System. This object follows the
         ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi iSISHelloTimer (45)}"
    ::= { prvtIsisCircEntry 38 }

prvtIsisCircLvl1LSPThrottle OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16NoZeroTC
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Minimal interval of time, in milliseconds, between
         transmissions of LSPs on an interface at level 1."
    REFERENCE   
        "{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
    ::= { prvtIsisCircEntry 39 }

prvtIsisCircLvl1MinLSPRetransInt OBJECT-TYPE
    SYNTAX      Integer32 (1..300)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Minimum interval, in seconds, between re-transmission of
         an LSP at level 1. This object follows the
         ResettingTimer behavior.
         
         Note that prvtIsisCircLvl1LSPThrottle controls
         how fast we send back to back LSPs. This variable
         controls how fast we re-send the same LSP."
    REFERENCE   
        "{ISIS.aoi minimumLSPTransmissionInterval (5)}"
    ::= { prvtIsisCircEntry 40 }

prvtIsisCircLvl1CSNPInterval OBJECT-TYPE
    SYNTAX      Integer32 (1..600)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Interval of time, in seconds, between periodic
         transmission of a complete set of CSNPs on
         multiaccess networks if this router is the
         designated router at level 1.
         This object follows the ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi completeSNPInterval (8)}"
    ::= { prvtIsisCircEntry 41 }

prvtIsisCircLvl1PartSNPInterval OBJECT-TYPE
    SYNTAX      Integer32 (1..120)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Minimum interval in seconds between sending Partial
         Sequence Number PDUs at level 1. This object
         follows the ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi partialSNPInterval (14)}"
    ::= { prvtIsisCircEntry 42 }

prvtIsisCircLvl1StickyDIS OBJECT-TYPE
    SYNTAX      Integer32 (0..127)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Boost to add to the priority of this router (up to the maximum
         permitted value) when it becomes DIS at level 1 to make it
         more likely to remain DIS."
    ::= { prvtIsisCircEntry 43 }

prvtIsisCircLvl1AuthUser OBJECT-TYPE
    SYNTAX      PrvtIsisAuthUserDataString
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Authentication user data for level 1's authentication.
         This data is passed opaquely to the authentication
         interface where it can be used to assist with
         authentication decisions."
    ::= { prvtIsisCircEntry 44 }

prvtIsisCircLvl1IDHostname OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The hostname corresponding to the system ID part of the
         prvtIsisCircLvl1ID object.
         
         This is the null string if the prvtIsisCircLvl1ID object
         is null, or if no hostname is known."
    ::= { prvtIsisCircEntry 45 }

prvtIsisCircLvl1DesISHostname OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The hostname corresponding to the system ID part of the
         prvtIsisCircLvl1DesIS object.
         
         This is the null string if the prvtIsisCircLvl1DesIS object
         is null, or if no hostname is known."
    ::= { prvtIsisCircEntry 46 }

prvtIsisCircLvl2Metric OBJECT-TYPE
    SYNTAX      PrvtIsisDefaultMetric
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The metric value of this circuit for level 2."
    REFERENCE   
        "{ISIS.aoi l1DefaultMetric (35)}"
    ::= { prvtIsisCircEntry 50 }

prvtIsisCircLvl2WideMetric OBJECT-TYPE
    SYNTAX      PrvtIsisWideMetric
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The wide metric value of this circuit for level 2."
    ::= { prvtIsisCircEntry 51 }

prvtIsisCircLvl2ISPriority OBJECT-TYPE
    SYNTAX      PrvtIsisISPriority
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "The priority for becoming the LAN-Designated
         Intermediate System at level 2."
    REFERENCE   
        "{ISIS.aoi l2IntermediateSystemPriority (73)}"
    ::= { prvtIsisCircEntry 52 }

prvtIsisCircLvl2IDOctet OBJECT-TYPE
    SYNTAX      Integer32 (0..255)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "A one byte identifier for the circuit selected by the
         Intermediate System.
         
         On point-to-point circuits, the value is used as the Local
         Circuit ID in point-to-point IIH PDUs transmitted on this
         circuit. In this case, values of prvtIsisCircLvl2IDOctet do
         not need to be unique.
         
         For broadcast circuits, the value is used to generate the
         LAN ID that will be used if this Intermediate System is
         elected as the Designated IS on this circuit. The value
         is required to differ on LANs where the Intermediate System
         is the Designated Intermediate System."
    ::= { prvtIsisCircEntry 53 }

prvtIsisCircLvl2ID OBJECT-TYPE
    SYNTAX      PrvtIsisCircuitID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "On a point to point circuit with a fully initialized
         adjacency to a peer IS, the value of this object is
         the circuit ID negotiated during adjacency initialization.
         On a point to point circuit without such an adjacency,
         the value is the concatenation of the local system ID
         and the one byte prvtIsisCircLvl2IDOctet for this circuit
         i.e. the value that would be proposed for the circuit ID.
         
         On other circuit types, the value returned is the zero
         length OCTET STRING."
    REFERENCE   
        "{ISIS.aoi ptPtCircuitID (51)}"
    ::= { prvtIsisCircEntry 54 }

prvtIsisCircLvl2DesIS OBJECT-TYPE
    SYNTAX      PrvtIsisCircuitID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The ID of the LAN-Designated Intermediate System
         on this circuit at level 2. If, for any reason,
         this system is not partaking in the relevant
         Designated Intermediate System election process,
         then the value returned is the zero length OCTET STRING."
    REFERENCE   
        "{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
    ::= { prvtIsisCircEntry 55 }

prvtIsisCircLvl2HelloMultiplier OBJECT-TYPE
    SYNTAX      Integer32 (2..100)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "This value is multiplied by the corresponding HelloTimer
         and the result in seconds (rounded up) is used as the
         holding time in transmitted hellos, to be used by
         receivers of hello packets from this IS."
    REFERENCE   
        "{ISIS.aoi iSISHelloTimer (45)}"
    ::= { prvtIsisCircEntry 56 }

prvtIsisCircLvl2HelloTimer OBJECT-TYPE
    SYNTAX      Integer32 (10..600000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Maximum period, in milliseconds, between IIH PDUs
         on multiaccess networks at level 2 for LANs.
         The value at L1 is used as the period between
         Hellos on L1L2 point to point circuits. Setting
         this value at level 2 on an L1L2 point to point
         circuit will result in an error of InconsistentValue.
         
         This object follows the ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi iSISHelloTimer (45)}"
    ::= { prvtIsisCircEntry 57 }

prvtIsisCircLvl2DRHelloTimer OBJECT-TYPE
    SYNTAX      Integer32 (10..120000)
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Period, in milliseconds, between Hello PDUs on
         multiaccess networks when this IS is the Designated
         Intermediate System. This object follows the
         ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi iSISHelloTimer (45)}"
    ::= { prvtIsisCircEntry 58 }

prvtIsisCircLvl2LSPThrottle OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16NoZeroTC
    UNITS       "milliseconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Minimal interval of time, in milliseconds, between
         transmissions of LSPs on an interface at level 2."
    REFERENCE   
        "{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
    ::= { prvtIsisCircEntry 59 }

prvtIsisCircLvl2MinLSPRetransInt OBJECT-TYPE
    SYNTAX      Integer32 (1..300)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Minimum interval, in seconds, between re-transmission of
         an LSP at level 2. This object follows the
         ResettingTimer behavior.
         
         Note that prvtIsisCircLvl2LSPThrottle controls
         how fast we send back to back LSPs. This variable
         controls how fast we re-send the same LSP."
    REFERENCE   
        "{ISIS.aoi minimumLSPTransmissionInterval (5)}"
    ::= { prvtIsisCircEntry 60 }

prvtIsisCircLvl2CSNPInterval OBJECT-TYPE
    SYNTAX      Integer32 (1..600)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Interval of time, in seconds, between periodic
         transmission of a complete set of CSNPs on
         multiaccess networks if this router is the
         designated router at level 2.
         This object follows the ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi completeSNPInterval (8)}"
    ::= { prvtIsisCircEntry 61 }

prvtIsisCircLvl2PartSNPInterval OBJECT-TYPE
    SYNTAX      Integer32 (1..120)
    UNITS       "seconds"
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Minimum interval in seconds between sending Partial
         Sequence Number PDUs at level 2. This object
         follows the ResettingTimer behavior."
    REFERENCE   
        "{ISIS.aoi partialSNPInterval (14)}"
    ::= { prvtIsisCircEntry 62 }

prvtIsisCircLvl2StickyDIS OBJECT-TYPE
    SYNTAX      Integer32 (0..127)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION 
        "Boost to add to the priority of this router (up to the maximum
         permitted value) when it becomes DIS at level 2 to make it
         more likely to remain DIS."
    ::= { prvtIsisCircEntry 63 }

prvtIsisCircLvl2IDHostname OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The hostname corresponding to the system ID part of the
         prvtIsisCircLvl2ID object.
         
         This is the null string if the prvtIsisCircLvl2ID object
         is null, or if no hostname is known."
    ::= { prvtIsisCircEntry 65 }

prvtIsisCircLvl2DesISHostname OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The hostname corresponding to the system ID part of the
         prvtIsisCircLvl2DesIS object.
         
         This is the null string if the prvtIsisCircLvl2DesIS object
         is null, or if no hostname is known."
    ::= { prvtIsisCircEntry 66 }

prvtIsisISAdj OBJECT IDENTIFIER
    ::= { prvtIsisMIBObjects 6 }

prvtIsisISAdjTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisISAdjEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The table of adjacencies to Intermediate Systems."
    ::= { prvtIsisISAdj 1 }

prvtIsisISAdjEntry OBJECT-TYPE
    SYNTAX      PrvtIsisISAdjEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry corresponds to one adjacency to an
         Intermediate System on this system."
    INDEX       { prvtIsisSysInstance, prvtIsisCircIfIndex, 
                  prvtIsisISAdjIndex }
    ::= { prvtIsisISAdjTable 1 }

PrvtIsisISAdjEntry ::= SEQUENCE {
    prvtIsisISAdjIndex                  Integer32,
    prvtIsisISAdjState                  INTEGER,
    prvtIsisISAdj3WayState              INTEGER,
    prvtIsisISAdjNeighSNPAAddress       PrvtIsisOSINSAddress,
    prvtIsisISAdjNeighSysType           INTEGER,
    prvtIsisISAdjNeighSysID             PrvtIsisSystemID,
    prvtIsisISAdjNbrExtendedCircID      Unsigned32,
    prvtIsisISAdjUsage                  INTEGER,
    prvtIsisISAdjHoldTimer              PrvtIsisUnsigned16NoZeroTC,
    prvtIsisISAdjNeighPriority          PrvtIsisISPriority,
    prvtIsisISAdjLastUpTime             TimeTicks,
    prvtIsisISAdjRestartCapable         TruthValue,
    prvtIsisISAdjPeerRestartState       INTEGER,
    prvtIsisISAdjSuppressed             TruthValue,
    prvtIsisISAdjNeighLanID             OCTET STRING,
    prvtIsisISAdjNeighHostname          PrvtIsisHostName,
    prvtIsisISAdjNeighLanIDHostname     PrvtIsisHostName
}

prvtIsisISAdjIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2000000000)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "A unique value identifying the IS adjacency from all
         other such adjacencies on this circuit. This value is
         automatically assigned by the system when the adjacency
         is created."
    ::= { prvtIsisISAdjEntry 1 }

prvtIsisISAdjState OBJECT-TYPE
    SYNTAX      INTEGER { down(1), initializing(2), up(3), failed(4) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The state of the adjacency."
    REFERENCE   
        "{ISIS.aoi adjacencyState (78)}"
    ::= { prvtIsisISAdjEntry 2 }

prvtIsisISAdj3WayState OBJECT-TYPE
    SYNTAX      INTEGER { up(0), initializing(1), down(2), failed(3) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The 3Way state of the adjacency. These are picked
         to match the historical on-the-wire representation
         of the 3Way state, and are not intended to match
         prvtIsisISAdjState."
    REFERENCE   
        "{ RFC 3373 }"
    ::= { prvtIsisISAdjEntry 3 }

prvtIsisISAdjNeighSNPAAddress OBJECT-TYPE
    SYNTAX      PrvtIsisOSINSAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The SNPA address of the neighboring system."
    REFERENCE   
        "{ISIS.aoi neighbourSNPAAddress (79)}"
    ::= { prvtIsisISAdjEntry 4 }

prvtIsisISAdjNeighSysType OBJECT-TYPE
    SYNTAX      INTEGER { l1IntermediateSystem(1), 
                    l2IntermediateSystem(2), l1L2IntermediateSystem(3), 
                    unknown(4) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The type of the neighboring system."
    REFERENCE   
        "{ISIS.aoi neighbourSystemType (80)}"
    ::= { prvtIsisISAdjEntry 5 }

prvtIsisISAdjNeighSysID OBJECT-TYPE
    SYNTAX      PrvtIsisSystemID
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The system ID of the neighboring Intermediate
         System."
    REFERENCE   
        "{ISIS.aoi neighbourSystemIds (83)}"
    ::= { prvtIsisISAdjEntry 6 }

prvtIsisISAdjNbrExtendedCircID OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The 4-byte Extended Circuit ID learned from the
         Neighbor during 3-way handshake, or 0."
    ::= { prvtIsisISAdjEntry 7 }

prvtIsisISAdjUsage OBJECT-TYPE
    SYNTAX      INTEGER { level1(1), level2(2), level1and2(3) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "How is the adjacency used? On a point-to-point link,
         this might be level1and2, but on a LAN, the usage will
         be level1 on the adjacency between peers at L1,
         and level2 for the adjacency between peers at L2."
    REFERENCE   
        "{ISIS.aoi adjacencyUsage (82)}"
    ::= { prvtIsisISAdjEntry 8 }

prvtIsisISAdjHoldTimer OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16NoZeroTC
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The holding time in seconds for this adjacency.
         This value is based on received IIH PDUs and
         the elapsed time since receipt."
    REFERENCE   
        "{ISIS.aoi holdingTimer (85)}"
    ::= { prvtIsisISAdjEntry 9 }

prvtIsisISAdjNeighPriority OBJECT-TYPE
    SYNTAX      PrvtIsisISPriority
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Priority of the neighboring Intermediate System for
         becoming the Designated Intermediate System."
    REFERENCE   
        "{ISIS.aoi lANPriority (86)}"
    ::= { prvtIsisISAdjEntry 10 }

prvtIsisISAdjLastUpTime OBJECT-TYPE
    SYNTAX      TimeTicks
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "If the prvtIsisISAdjState is in state 'up', the value
         of sysUpTime when the adjacency most recently
         entered the state 'up', or 0 if it has never
         been in state 'up'."
    ::= { prvtIsisISAdjEntry 11 }

prvtIsisISAdjRestartCapable OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Does the neighbor support restart signalling?
         
         This object is set to 'true' if the peer includes the
         restart TLV in IIH PDUs."
    ::= { prvtIsisISAdjEntry 12 }

prvtIsisISAdjPeerRestartState OBJECT-TYPE
    SYNTAX      INTEGER { notRestarting(1), restartingNoHelp(2), 
                    helpingRestart(3) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Is the peer currently restarting?
         
         Set to 'notRestarting' if the neighbor is not restarting
         (is not including a restart TLV in the IIH, or is not setting the
         RR bit).
         
         Set to 'restartingNoHelp' if the neighbor is restarting
         (is including a restart TLV with the RR bit in IIH PDUs), but
         the local node is not helping the restart.
         
         Set to 'helpingRestart' if the neighbor is restarting and the
         local node is helping the restart."
    ::= { prvtIsisISAdjEntry 13 }

prvtIsisISAdjSuppressed OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Has the peer requested that the adjacency be suppressed?
         If set to 'true', the adjacency will not be added to the
         local LSP.
         
         This object is set to 'true' if the peer sets the SA bit in
         the restart TLV in IIH PDUs."
    ::= { prvtIsisISAdjEntry 14 }

prvtIsisISAdjNeighLanID OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "On a broadcast circuit, the LAN ID reported by the
         neighbor for the Designated Intermediate System on this
         circuit at this level. For a non-broadcast circuit, or if,
         for any reason, the neighbor is not partaking in the
         relevant Designated Intermediate System election process,
         then the value returned is the zero length OCTET STRING."
    ::= { prvtIsisISAdjEntry 15 }

prvtIsisISAdjNeighHostname OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The hostname corresponding to prvtIsisISAdjNeighSysID.
         This is the null string if prvtIsisSdEntMapHostnames is
         'false' or if no hostname is known."
    ::= { prvtIsisISAdjEntry 16 }

prvtIsisISAdjNeighLanIDHostname OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The hostname corresponding to the system ID part of the
         prvtIsisISAdjNeighLanID object.
         
         This is the null string if the prvtIsisISAdjNeighLanID object
         is null, if prvtIsisSdEntMapHostnames is 'false', or if no
         hostname is known."
    ::= { prvtIsisISAdjEntry 17 }

prvtIsisISAdjAreaAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisISAdjAreaAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This table contains the set of Area Addresses of
         neighboring Intermediate Systems as reported in received
         IIH PDUs."
    REFERENCE   
        "{ISIS.aoi areaAddressesOfNeighbour (84)}"
    ::= { prvtIsisISAdj 2 }

prvtIsisISAdjAreaAddrEntry OBJECT-TYPE
    SYNTAX      PrvtIsisISAdjAreaAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry contains one Area Address reported by a
         neighboring Intermediate System in its IIH PDUs."
    INDEX       { prvtIsisSysInstance, prvtIsisCircIfIndex, 
                  prvtIsisISAdjIndex, prvtIsisISAdjAreaAddrIndex }
    ::= { prvtIsisISAdjAreaAddrTable 1 }

PrvtIsisISAdjAreaAddrEntry ::= SEQUENCE {
    prvtIsisISAdjAreaAddrIndex  Integer32,
    prvtIsisISAdjAreaAddress    PrvtIsisOSINSAddress
}

prvtIsisISAdjAreaAddrIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2000000000)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An index for the areas associated with one neighbor.
         This provides a simple way to walk the table."
    ::= { prvtIsisISAdjAreaAddrEntry 1 }

prvtIsisISAdjAreaAddress OBJECT-TYPE
    SYNTAX      PrvtIsisOSINSAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "One Area Address as reported in IIH PDUs received from
         the neighbor."
    ::= { prvtIsisISAdjAreaAddrEntry 2 }

prvtIsisISAdjIPAddrTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisISAdjIPAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "This table contains the set of IP Addresses of
         neighboring Intermediate Systems as reported in received
         IIH PDUs.
         
         If the prvtIsisSysRstrctLanAdjsToSubnet object in prvtIsisSysTable
         is set to 'true' then for an IPv4 broadcast circuit, only
         IP addresses on the same subnet as the local circuit are
         included in this table."
    ::= { prvtIsisISAdj 3 }

prvtIsisISAdjIPAddrEntry OBJECT-TYPE
    SYNTAX      PrvtIsisISAdjIPAddrEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry contains one IP Address reported by a
         neighboring Intermediate System in its IIH PDUs."
    INDEX       { prvtIsisSysInstance, prvtIsisCircIfIndex, 
                  prvtIsisISAdjIndex, prvtIsisISAdjIPAddrIndex }
    ::= { prvtIsisISAdjIPAddrTable 1 }

PrvtIsisISAdjIPAddrEntry ::= SEQUENCE {
    prvtIsisISAdjIPAddrIndex    Integer32,
    prvtIsisISAdjIPAddrType     PrvtIsisInetAddressType,
    prvtIsisISAdjIPAddrAddress  PrvtIsisInetAddress
}

prvtIsisISAdjIPAddrIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..2000000000)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "An index to this table which identifies the IP addresss
         to which this entry belongs."
    ::= { prvtIsisISAdjIPAddrEntry 1 }

prvtIsisISAdjIPAddrType OBJECT-TYPE
    SYNTAX      PrvtIsisInetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The type of one IP Address as reported in IIH PDUs
         received from the neighbor."
    ::= { prvtIsisISAdjIPAddrEntry 2 }

prvtIsisISAdjIPAddrAddress OBJECT-TYPE
    SYNTAX      PrvtIsisInetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "One IP Address as reported in IIH PDUs received from the
         neighbor.
         
         The type of this address is determined by the value of
         the prvtIsisISAdjIPAddrType object."
    ::= { prvtIsisISAdjIPAddrEntry 3 }

prvtIsisIPReachAddr OBJECT IDENTIFIER
    ::= { prvtIsisMIBObjects 8 }

prvtIsisIPRATable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisIPRAEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The table of IP Reachable Addresses to networks,
         subnetworks or hosts, learned automatically.
         
         This table is read-only. Manual addition of entries
         using this table is not supported."
    ::= { prvtIsisIPReachAddr 1 }

prvtIsisIPRAEntry OBJECT-TYPE
    SYNTAX      PrvtIsisIPRAEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry defines an IP Reachable Address to a network,
         subnetwork or host.
         
         Each IP Reachable Address may have multiple entries in the
         table, one for each equal cost path to the reachable address."
    INDEX       { prvtIsisSysInstance, prvtIsisIPRADestType, 
                  prvtIsisIPRADest, prvtIsisIPRADestPrefixLen, 
                  prvtIsisIPRANextHopIndex }
    ::= { prvtIsisIPRATable 1 }

PrvtIsisIPRAEntry ::= SEQUENCE {
    prvtIsisIPRADestType        PrvtIsisInetAddressType,
    prvtIsisIPRADest            PrvtIsisInetAddress,
    prvtIsisIPRADestPrefixLen   InetAddressPrefixLength,
    prvtIsisIPRANextHopIndex    Integer32,
    prvtIsisIPRANextHopType     PrvtIsisInetAddressType,
    prvtIsisIPRANextHop         PrvtIsisInetAddress,
    prvtIsisIPRAType            INTEGER,
    prvtIsisIPRAAdminState      PrvtIsisAdminState,
    prvtIsisIPRAMetric          PrvtIsisDefaultMetric,
    prvtIsisIPRAMetricType      PrvtIsisMetricType,
    prvtIsisIPRAFullMetric      PrvtIsisFullMetric,
    prvtIsisIPRASNPAAddress     PrvtIsisOSINSAddress,
    prvtIsisIPRASourceType      INTEGER
}

prvtIsisIPRADestType OBJECT-TYPE
    SYNTAX      PrvtIsisInetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The type of this IP Reachable Address."
    ::= { prvtIsisIPRAEntry 1 }

prvtIsisIPRADest OBJECT-TYPE
    SYNTAX      PrvtIsisInetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The destination of this IP Reachable Address. This is
         either a network address, subnetwork address or host
         address.
         
         The type of this address is determined by the value of
         the prvtIsisIPRADestType object."
    ::= { prvtIsisIPRAEntry 2 }

prvtIsisIPRADestPrefixLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength (0..128)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The length of the IP Netmask for Reachability Address."
    ::= { prvtIsisIPRAEntry 3 }

prvtIsisIPRANextHopIndex OBJECT-TYPE
    SYNTAX      Integer32 (1..65535)
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Index of next hop. Used when there are multiple Equal
         Cost Multipath alternatives for the same destination."
    ::= { prvtIsisIPRAEntry 4 }

prvtIsisIPRANextHopType OBJECT-TYPE
    SYNTAX      PrvtIsisInetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The type of the IP next hop address."
    ::= { prvtIsisIPRAEntry 5 }

prvtIsisIPRANextHop OBJECT-TYPE
    SYNTAX      PrvtIsisInetAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The IP next hop to this destination.
         
         The type of this address is determined by the value of
         the prvtIsisIPRANextHopType object."
    ::= { prvtIsisIPRAEntry 6 }

prvtIsisIPRAType OBJECT-TYPE
    SYNTAX      INTEGER { manual(1), automatic(2) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The type of this IP Reachable Address. Those of type
         manual are created by the network manager. Those of type
         automatic are created through propagation of routing
         information from another routing protocol.
         
         Currently only automatic entries in this table are supported."
    ::= { prvtIsisIPRAEntry 7 }

prvtIsisIPRAAdminState OBJECT-TYPE
    SYNTAX      PrvtIsisAdminState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The administrative state of the IP Reachable Address."
    ::= { prvtIsisIPRAEntry 9 }

prvtIsisIPRAMetric OBJECT-TYPE
    SYNTAX      PrvtIsisDefaultMetric
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The metric value for reaching the specified
         destination over this circuit."
    ::= { prvtIsisIPRAEntry 10 }

prvtIsisIPRAMetricType OBJECT-TYPE
    SYNTAX      PrvtIsisMetricType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Indicates whether the metric is internal or
         external."
    ::= { prvtIsisIPRAEntry 11 }

prvtIsisIPRAFullMetric OBJECT-TYPE
    SYNTAX      PrvtIsisFullMetric
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The wide metric value for reaching the specified
         destination over this circuit."
    ::= { prvtIsisIPRAEntry 12 }

prvtIsisIPRASNPAAddress OBJECT-TYPE
    SYNTAX      PrvtIsisOSINSAddress
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The SNPA Address to which a PDU may be forwarded in
         order to reach a destination which matches this IP
         Reachable Address.
         This field is currently not supported."
    ::= { prvtIsisIPRAEntry 13 }

prvtIsisIPRASourceType OBJECT-TYPE
    SYNTAX      INTEGER { static(1), direct(2), ospfv2(3), ospfv3(4), 
                    isis(5), rip(6), igrp(7), eigrp(8), bgp(9), 
                    other(10) }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The origin of this route."
    ::= { prvtIsisIPRAEntry 14 }

prvtIsisLSPDataBase OBJECT IDENTIFIER
    ::= { prvtIsisMIBObjects 9 }

prvtIsisLSPSummaryTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisLSPSummaryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The table of LSP Headers."
    ::= { prvtIsisLSPDataBase 1 }

prvtIsisLSPSummaryEntry OBJECT-TYPE
    SYNTAX      PrvtIsisLSPSummaryEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry provides a summary describing an
         LSP currently stored in the system."
    INDEX       { prvtIsisSysInstance, prvtIsisLSPLevel, prvtIsisLSPID }
    ::= { prvtIsisLSPSummaryTable 1 }

PrvtIsisLSPSummaryEntry ::= SEQUENCE {
    prvtIsisLSPLevel            PrvtIsisISLevel,
    prvtIsisLSPID               PrvtIsisLinkStatePDUID,
    prvtIsisLSPSeq              Unsigned32,
    prvtIsisLSPZeroLife         TruthValue,
    prvtIsisLSPChecksum         PrvtIsisUnsigned16TC,
    prvtIsisLSPLifetimeRemain   PrvtIsisUnsigned16TC,
    prvtIsisLSPPDULength        PrvtIsisUnsigned16TC,
    prvtIsisLSPAttributes       PrvtIsisUnsigned8TC,
    prvtIsisLSPIDHostname       PrvtIsisHostName
}

prvtIsisLSPLevel OBJECT-TYPE
    SYNTAX      PrvtIsisISLevel
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "At which level does this LSP appear?"
    ::= { prvtIsisLSPSummaryEntry 1 }

prvtIsisLSPID OBJECT-TYPE
    SYNTAX      PrvtIsisLinkStatePDUID
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The 8-byte LSP ID, consisting of the SystemID,
         Circuit ID, and Fragment Number."
    ::= { prvtIsisLSPSummaryEntry 2 }

prvtIsisLSPSeq OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The sequence number for this LSP."
    ::= { prvtIsisLSPSummaryEntry 3 }

prvtIsisLSPZeroLife OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Is this LSP being purged by this System?"
    ::= { prvtIsisLSPSummaryEntry 4 }

prvtIsisLSPChecksum OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16TC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The 16 bit Fletcher Checksum for this LSP."
    ::= { prvtIsisLSPSummaryEntry 5 }

prvtIsisLSPLifetimeRemain OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16TC
    UNITS       "seconds"
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The remaining lifetime in seconds for this LSP.
         
         For a current LSP (prvtIsisLSPZeroLife is 'false'), this
         indicates the time remaining before the LSP will expire.
         For an LSP being purged from the system (prvtIsisLSPZeroLife
         is 'true'), the LSP remains in the database for
         ZeroAgeLifetime, and this will indicate the time remaining
         before final deletion of the LSP."
    ::= { prvtIsisLSPSummaryEntry 6 }

prvtIsisLSPPDULength OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16TC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The length of this LSP."
    ::= { prvtIsisLSPSummaryEntry 7 }

prvtIsisLSPAttributes OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned8TC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "Flags carried by the LSP."
    ::= { prvtIsisLSPSummaryEntry 8 }

prvtIsisLSPIDHostname OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The hostname corresponding to the system ID part of the
         prvtIsisLSPID object.
         
         This is the null string if no hostname is known."
    ::= { prvtIsisLSPSummaryEntry 9 }

prvtIsisLSPTLVTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF PrvtIsisLSPTLVEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The table of LSPs in the database."
    ::= { prvtIsisLSPDataBase 2 }

prvtIsisLSPTLVEntry OBJECT-TYPE
    SYNTAX      PrvtIsisLSPTLVEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "Each entry describes a TLV within
         an LSP currently stored in the
         system."
    INDEX       { prvtIsisSysInstance, prvtIsisLSPLevel, prvtIsisLSPID, 
                  prvtIsisLSPTLVIndex }
    ::= { prvtIsisLSPTLVTable 1 }

PrvtIsisLSPTLVEntry ::= SEQUENCE {
    prvtIsisLSPTLVIndex     Unsigned32,
    prvtIsisLSPTLVSeq       Unsigned32,
    prvtIsisLSPTLVChecksum  PrvtIsisUnsigned16TC,
    prvtIsisLSPTLVType      PrvtIsisUnsigned8TC,
    prvtIsisLSPTLVLen       PrvtIsisUnsigned8TC,
    prvtIsisLSPTLVValue     OCTET STRING,
    prvtIsisLSPTLVHostname  PrvtIsisHostName
}

prvtIsisLSPTLVIndex OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION 
        "The index of this TLV in the LSP. The first TLV has index 1
         and the Nth TLV has an index of N."
    ::= { prvtIsisLSPTLVEntry 1 }

prvtIsisLSPTLVSeq OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The sequence number for this LSP."
    ::= { prvtIsisLSPTLVEntry 2 }

prvtIsisLSPTLVChecksum OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned16TC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The 16 bit Fletcher Checksum for this LSP."
    ::= { prvtIsisLSPTLVEntry 3 }

prvtIsisLSPTLVType OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned8TC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The type of this TLV."
    ::= { prvtIsisLSPTLVEntry 4 }

prvtIsisLSPTLVLen OBJECT-TYPE
    SYNTAX      PrvtIsisUnsigned8TC
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The length of this TLV."
    ::= { prvtIsisLSPTLVEntry 5 }

prvtIsisLSPTLVValue OBJECT-TYPE
    SYNTAX      OCTET STRING
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The value of this TLV."
    ::= { prvtIsisLSPTLVEntry 6 }

prvtIsisLSPTLVHostname OBJECT-TYPE
    SYNTAX      PrvtIsisHostName
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION 
        "The hostname corresponding to the system ID part of the
         prvtIsisLSPID object.
         
         This is the null string if no hostname is known."
    ::= { prvtIsisLSPTLVEntry 7 }

END -- end of module PRVT-ISIS-MIB.