path: root/MIBS/ubiquoss/UBQS-ENTITY-MIB

-- *****************************************************************
-- UBQS-ENTITY-MIB  : Ubiquoss FRU Control MIB file
--
-- June 2009, Hyung Eun Park
--
-- Copyright (c) 2009 by Ubiquoss, Corp.
-- All rights reserved.    
--
-- *****************************************************************
--

UBQS-ENTITY-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    NOTIFICATION-TYPE,
    Unsigned32,
    Integer32
        FROM SNMPv2-SMI
    MODULE-COMPLIANCE,
    OBJECT-GROUP,
    NOTIFICATION-GROUP
        FROM SNMPv2-CONF
    TEXTUAL-CONVENTION,
    DisplayString,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    entPhysicalIndex,
    entPhysicalName,
    entPhysicalDescr,
    entPhysicalContainedIn
        FROM ENTITY-MIB
    ubiMgmtv2
        FROM UBQS-SMI;
  
  
ubiEntityMIB MODULE-IDENTITY
    LAST-UPDATED    "200906160000Z"
    ORGANIZATION 	"Ubiquoss Corp."
	CONTACT-INFO
		"	Ubiquoss
			Customer Service

		 Postal: 24F Milennium B/D,
		 	467-12, Dogok-Dong,
			GangNam-Gu, Seoul 135-270
			Korea

		   Tel: 82-2-2190-3100"     
    DESCRIPTION
        "The UBQS-ENTITY-MIB is used to monitor
        and configure operational status of 
        Field Replaceable Units (FRUs) and other managable 
        physical entities of the system listed in the 
        Entity-MIB (RFC 2737) entPhysicalTable."
    ::= { ubiMgmtv2 3 }


-- ***********************************************************   
-- TEXTUAL-CONVENTION
-- Define the composed syntax 
-- ***********************************************************

ModuleOperType ::= TEXTUAL-CONVENTION
    STATUS          current
    DESCRIPTION
        "Operational module states.  Valid values are :

        	unknown(1)            Module is not in one of other states
         					  normal operational states:

        	ok(2)                 Module is operational.

        	disabled(3)           Module is administratively disabled.

        	selfTest(6)           Module is performing selfTest.


         failure states:

        	failed(7)              Module has failed due to some condition
                              not stated above.
                              
        	dormant(12)            Module is waiting for an external or
                              internal event to become operational.
		"
    SYNTAX          INTEGER  {
                        other(1),
                        ok(2),
                        disabled(3)
     }      

UbiSensorDataType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "sensor measurement data types.  valid values are:
        other(1):        a measure other than those listed below
        unknown(2):      unknown measurement, or 
                         arbitrary, relative numbers    
        volts(3):      electric potential
        amperes(4):      electric current
        celsius(5):      temperature
        dBm(6):         dB relative to 1mW of power     
        percentRH(8):    percent relative humidity
        rpm(9):         shaft revolutions per minute
        cmm(10),:        cubic meters per minute (airflow)
        truthvalue(11):  value takes { true(1), false(2) }
        specialEnum(12): value takes user defined enumerated values
        watts(13):        power
        hertz(14):        frequency
        "
    SYNTAX INTEGER {
        other(1),
        unknown(2),
        volts(3),
        amperes(4),   
        celsius(5),
        dBm(6),
        percentRH(8),
        rpm(9),
        cmm(10),
        truthvalue(11),
        specialEnum(12),
        watts(13),
        hertz(14)
    }          
    
UbiSensorDataScale ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "International System of Units (SI) prefixes."
    SYNTAX INTEGER {
        yocto(1),   -- 10^-24
        zepto(2),   -- 10^-21
        atto(3),    -- 10^-18
        femto(4),   -- 10^-15
        pico(5),    -- 10^-12
        nano(6),    -- 10^-9
        micro(7),   -- 10^-6
        milli(8),   -- 10^-3
        units(9),   -- 10^0
        kilo(10),   -- 10^3
        mega(11),   -- 10^6
        giga(12),   -- 10^9
        tera(13),   -- 10^12
        exa(14),    -- 10^15
        peta(15),   -- 10^18
        zetta(16),  -- 10^21
        yotta(17)   -- 10^24
    }

UbiSensorPrecision ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "When in the range 1 to 9, SensorPrecision is the number 
        of decimal places in the fractional part of 
        a SensorValue fixed-point number.  When in the range -8 to
        -1, SensorPrecision is the number of accurate digits in 
        a SensorValue fixed-point number.

        SensorPrecision is 0 for non-fixed-point numbers.

        Agent implementors must choose a value for SensorPrecision 
        so that the precision and accuracy of a SensorValue is 
        correctly indicated.

        For example, a temperature sensor that can measure 0o to 
        100o C in 0.1o increments, +/- 0.05o, would have a 
        SensorPrecision of 1, a SensorDataScale of units(0), and a 
        SensorValue ranging from 0 to 1000.  
        The SensorValue would be interpreted as (degrees C * 10).

        If that temperature sensor's precision were 0.1o but its 
        accuracy were only +/- 0.5o, then the SensorPrecision would 
        be 0. The SensorValue would be interpreted as degrees C.

        Another example: a fan rotation speed sensor that measures RPM 
        from 0 to 10,000 in 100 RPM increments, with an accuracy of 
        +50/-37 RPM, would have a SensorPrecision of -2, a 
        SensorDataScale of units(9), and a SensorValue ranging from 0 
        to 10000. The 10s and 1s digits of SensorValue would always 
        be 0.
        "
    SYNTAX INTEGER (-8..9)

UbiSensorValue_cisco ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "For sensors that measure voltsAC, voltsDC, 
        amperes, watts, hertz, celsius, cmm
        this item is a fixed point number ranging from 
        -999,999,999 to +999,999,999.  Use the value 
        -1000000000 to indicate underflow. Use the value 
        +1000000000 to indicate overflow.  Use SensorPrecision
        to indicate how many fractional digits the SensorValue
        has.


        For sensors that measure percentRH, this item
        is a number ranging from 0 to 100.

        For sensors that measure rpm, this item
        can take only nonnegative values, 0..999999999.

        For sensors of type truthvalue, this item 
        can take only two values: true(1), false(2).

        For sensors of type specialEnum, this item
        can take any value in the range (-1000000000..1000000000),
        but the meaning of each value is specific to the 
        sensor.

        For sensors of type other and unknown, 
        this item can take any value in the range 
        (-1000000000..1000000000), but the meaning of the values 
        are specific to the sensor.

        Use Entity-MIB entPhysicalTable.entPhysicalVendorType
        to learn about the sensor type.
    "
    SYNTAX INTEGER (-1000000000..1000000000)
 				         
 				         
UbiSensorValue ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        "Represent the sensor value"
    SYNTAX OCTET STRING 				         

    
UbiTcIdentifier ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        ""
    SYNTAX INTEGER {     
   		unknown(0),  
    	other(1),
		gbic(2),
		module(3),
		sfp(4),
		xbi(5),
		xenpak(6),
		xfp(7),
		xff(8),
		xfp_e(9),
		xpak(10),
		x2(11)
    }

    
UbiTcEncodingType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        ""
    SYNTAX INTEGER {
		unknown(0),     
		other(1),
		enc_64b(2),    
		enc_4b5b(3),		
		enc_8b10b(4),
		enc_sonet(5),
		enc_nrz(6),
		enc_rz(7),
		enc_manchester(8)
	}

UbiTcConnectorType ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
        ""
    SYNTAX INTEGER {
		unknown(0),     
		other(1),
		sc(2),
		fiber_style1_copper(3),
		fiber_stype2_copper(4),
		bnc_tnc(5),
		fiber_coaxial(6),
		fiberjack(7),     
		lc(8),
		mt_rj(9),
		sg(10),
		optical_pigtail(11),
		hssdc2(12),
		copper_pigtail(13)			
	}


   
-- ***********************************************************
-- ubiEntityMIB
-- *********************************************************** 

ubiEntityMIBObjects  			OBJECT IDENTIFIER		::= { ubiEntityMIB 1 }
ubiEntityMIBNotificationPrefix  OBJECT IDENTIFIER		::= { ubiEntityMIB 2 }
ubiEntityMIBConformance  		OBJECT IDENTIFIER	 	::= { ubiEntityMIB 3 }
        

ubiEntityNotificationEnables  	OBJECT IDENTIFIER		::= { ubiEntityMIBObjects 1 }
ubiExtSlot  					OBJECT IDENTIFIER		::= { ubiEntityMIBObjects 4 }
ubiTransceiver  				OBJECT IDENTIFIER		::= { ubiEntityMIBObjects 5 }

ubiFruNotifications  				OBJECT IDENTIFIER	 	::= { ubiEntityMIBNotificationPrefix 0 }
ubiEntitySensorNotifications  		OBJECT IDENTIFIER	 	::= { ubiEntityMIBNotificationPrefix 1 }

    	 
-- ***********************************************************
-- ubiEntityEnableFruControlNotification
-- ***********************************************************      


	ubiFRUControlEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"This variable indicates whether the system
        	produces the following notifications:
        	ubiEntityFRUInserted, ubiEntityFRURemoved.

        	A false value will prevent these notifications
       	 from being generated."
  	 	DEFVAL          { false } 
    	::= { ubiEntityNotificationEnables 1 }         
    	
  	ubiEntSensorThresholdNotificationEnabled OBJECT-TYPE
    	SYNTAX          TruthValue
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"This variable indicates whether the system
        	produces the following notification:
        	ubiEntSensorThreshold.

        	A false value will prevent these notifications 
        	from being generated."
  	 	DEFVAL          { false } 
    	::= { ubiEntityNotificationEnables 2 }     

                                                                    
-- ***********************************************************
-- ubiEntityModuleTable
-- *********************************************************** 

	ubiModuleTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiModuleEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table contains one row per module entity."
    	::= { ubiEntityMIBObjects 2 }


	ubiModuleEntry OBJECT-TYPE
    	SYNTAX          UbiModuleEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Information about a particular module entity."
    	INDEX           { entPhysicalIndex } 
    	::= { ubiModuleTable 1 }

	UbiModuleEntry ::= SEQUENCE {                  
		ubiModuleId								INTEGER,
		ubiModuleType							DisplayString,
        ubiModuleOperStatus             		ModuleOperType,
        ubiModuleStatusLastChangeTime   		TimeStamp,
        ubiModuleSerialNumber			  		DisplayString, 
        ubiModuleSlotNumber     				Integer32,
       	ubiModulePortNumber     				Integer32,
       	ubiModuleAction            				INTEGER,
       }
 
   	ubiModuleId OBJECT-TYPE
    	SYNTAX          INTEGER
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The unique module ID." 
    	::= { ubiModuleEntry 1 }
 
  	ubiModuleType OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The textual type of this module." 
    	::= { ubiModuleEntry 2 }

	ubiModuleOperStatus OBJECT-TYPE
    	SYNTAX          ModuleOperType
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The operational state of this module." 
    	::= { ubiModuleEntry 3 }
  
	ubiModuleStatusLastChangeTime OBJECT-TYPE
    	SYNTAX          TimeStamp
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
       		"The value of sysUpTime when ubiModuleOperStatus
        	is changed." 
    	::= { ubiModuleEntry 4 }     
    	
 	ubiModuleSerialNumber OBJECT-TYPE
        SYNTAX        DisplayString
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION   
        	"The serial number of this module."
        ::= { ubiModuleEntry 5 }
 
  	ubiModuleSlotNumber OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"This value is determined by the number of slot 
        	where the module is located." 
    	::= { ubiModuleEntry 6 }   

 	ubiModulePortNumber OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"This value is determined by the number of port 
        	where the module is located." 
    	::= { ubiModuleEntry 7 }   

	ubiModuleAction 		OBJECT-TYPE
    	SYNTAX          INTEGER    	   
    	{   
    			other(1),
				reset(2)
    	}
    	MAX-ACCESS      read-write
    	STATUS          current
    	DESCRIPTION
        	"This object, when read, returns one of the
 			following results:
 	    		other(1):   module permanently enabled
 			
 			Setting this object to one of the acceptable values 
 			gives the following results:
 	  			other(1):  gives an error
 	  			reset(2):  resets the module's control logic
 				Setting this object to any other values results in
 				an error." 
    	::= { ubiModuleEntry 8 }
 
 
 
-- ***********************************************************
-- ubiSlotEntity
-- ***********************************************************   

	ubiSlotTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiSlotEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table contains one row per slot entity."
    	::= { ubiEntityMIBObjects 3 }

	ubiSlotEntry OBJECT-TYPE
    	SYNTAX          UbiSlotEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"Information about a particular slot entity."
    	INDEX           { entPhysicalIndex } 
    	::= { ubiSlotTable 1 }

	UbiSlotEntry ::= SEQUENCE { 
		ubiSlotModuleId					INTEGER,       
		ubiSlotId						INTEGER,  
		ubiSlotType						DisplayString,
		ubiSlotOperStatus 			 	ModuleOperType,
       	ubiSlotPortNumber     			Integer32,
       	ubiSlotSerialNumber             DisplayString
	}                       
	
 	ubiSlotModuleId OBJECT-TYPE
    	SYNTAX          INTEGER
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The unique module ID." 
    	::= { ubiSlotEntry 1 } 
 
  	ubiSlotId OBJECT-TYPE
    	SYNTAX          INTEGER
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The unique slot ID." 
    	::= { ubiSlotEntry 2 }
 
  	ubiSlotType OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The textual type of this slot." 
    	::= { ubiSlotEntry 3 }

	ubiSlotOperStatus OBJECT-TYPE
    	SYNTAX          ModuleOperType 
    	MAX-ACCESS      read-only
   	 	STATUS          current
    	DESCRIPTION
        	"The status of this slot." 
    	::= { ubiSlotEntry 4 }

 	ubiSlotPortNumber OBJECT-TYPE
    	SYNTAX          Integer32
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"This value is determined by the number of port 
        	where the slot is located." 
    	::= { ubiSlotEntry 5 }   
   
 	ubiSlotSerialNumber OBJECT-TYPE
        SYNTAX        DisplayString
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION   
        	"The serial number of this slot."
        ::= { ubiSlotEntry 6 }
                 
                 
-- ***********************************************************
-- ubiExtSlotTable
-- *********************************************************** 

 	ubiIEEE1588SlotOperStatus OBJECT-TYPE
    	SYNTAX          INTEGER {           
    		equip(1),
    		unequip(2)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The operational status of the slot for 
        	IEEE 1588 specification." 
    	::= { ubiExtSlot 1 }   
                 

 	ubiMngSlotOperStatus OBJECT-TYPE
    	SYNTAX          INTEGER {           
    		equip(1),
    		unequip(2)
    	}
    	MAX-ACCESS      read-only
    	STATUS          current
    	DESCRIPTION
        	"The operational status of the slot for 
        	mng specification." 
    	::= { ubiExtSlot 2 }   
                 
-- ***********************************************************
-- ubiTransceiver
-- ***********************************************************
  
 	ubiTransceiverMonitoring OBJECT-TYPE
    	SYNTAX          TruthValue
     	MAX-ACCESS      read-write
    	STATUS          current    
    	DESCRIPTION
        "This variable indicates whether the system produces 
        the log and notification for transceiver sensor."
	   	::= { ubiTransceiver 3 }         
	   	
	   	
-- ***********************************************************
-- ubiEntitySensorTable
-- ***********************************************************
  
	ubiEntitySensorTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiEntitySensorEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table contains objects which provide information 
        	 about the transceiver sensor of physical entity."
    	::= { ubiTransceiver 1 }

	ubiEntitySensorEntry OBJECT-TYPE
    	SYNTAX          UbiEntitySensorEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An entry containing management information applicable 
        	to the transceiver sensor of a particular physical entity."
    	INDEX           { entPhysicalIndex  } 
    	::= { ubiEntitySensorTable 1 }
                                                
	UbiEntitySensorEntry ::= SEQUENCE {            
			ubiEntSensorType							UbiSensorDataType,     
			ubiEntSensorScale							UbiSensorDataScale,
			ubiEntSensorValue                       	UbiSensorValue,
			ubiEntSensorEventStatus 					INTEGER,
			ubiEntSensorEventUpdateTime					TimeStamp,		
			ubiEntSensorAlarmHighThreshold				UbiSensorValue,   
			ubiEntSensorWarningHighThreshold			UbiSensorValue,    
			ubiEntSensorWarningLowThreshold				UbiSensorValue,
			ubiEntSensorAlarmLowThreshold				UbiSensorValue,			
			--ubiEntSensorPrecision 					UbiSensorPrecision,    
			ubiEntSensorName							DisplayString

	}
  
 	ubiEntSensorType OBJECT-TYPE
    	SYNTAX          UbiSensorDataType
     	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        "This variable indicates the type of data reported 
         by the entSensorValue.  
         valid values are:
	        other(1):        a measure other than those listed below
	        unknown(2):      unknown measurement, or 
	                         arbitrary, relative numbers    
	        voltsAC(3):      electric potential
	        voltsDC(4):      electric potential
	        amperes(5):      electric current
	        celsius(6):      temperature
	        dBm(7):         dB relative to 1mW of power     
		"
	   	::= { ubiEntitySensorEntry 1 }   
  
  	ubiEntSensorScale OBJECT-TYPE
    	SYNTAX          UbiSensorDataScale
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates the exponent to apply
            to sensor values reported by entSensorValue." 
    	::= { ubiEntitySensorEntry 2 }    
 
 -- 	ubiEntSensorPrecision OBJECT-TYPE
 --   	SYNTAX          UbiSensorPrecision
 --   	MAX-ACCESS      read-only
 --   	STATUS          current
 --  		DESCRIPTION
 --       	"" 
 --   	::= { ubiEntitySensorEntry 3 }  

 
  	ubiEntSensorValue OBJECT-TYPE
    	SYNTAX          UbiSensorValue
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"This variable reports the most recent measurement seen
             by the sensor." 
    	::= { ubiEntitySensorEntry 3 } 
 
 	ubiEntSensorEventStatus OBJECT-TYPE
    	SYNTAX          INTEGER {     
    		none(0),
    	 	normal(1),
    	 	highAlarm(2),   
     	 	highWarning(3),
     	 	lowWarning(4),  
    	 	lowAlarm(5)
       	}
    	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
        	"This variable indicates the present 
        	current event status of the sensor."
	   	::= { ubiEntitySensorEntry 4 }    

 
  	ubiEntSensorEventUpdateTime OBJECT-TYPE
    	SYNTAX          TimeStamp
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"The value of sysUpTime when the status of 
        	entity sensor is changed." 
    	::= { ubiEntitySensorEntry 5 } 

   	ubiEntSensorAlarmHighThreshold OBJECT-TYPE
        SYNTAX			UbiSensorValue
        MAX-ACCESS      read-write
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates the value of 
        	the high alarm threshold."
       	::= { ubiEntitySensorEntry 6 }    				 
  
  
   	ubiEntSensorWarningHighThreshold OBJECT-TYPE
        SYNTAX			UbiSensorValue
        MAX-ACCESS      read-write
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates the value of 
        	the high warning threshold."
       	::= { ubiEntitySensorEntry 7 }    				 

   	ubiEntSensorWarningLowThreshold OBJECT-TYPE
        SYNTAX			UbiSensorValue
        MAX-ACCESS      read-write
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates the value of 
        	the low warning threshold."
       	::= { ubiEntitySensorEntry 8 }   

   	ubiEntSensorAlarmLowThreshold OBJECT-TYPE
        SYNTAX			UbiSensorValue
        MAX-ACCESS      read-write
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates the value of 
        	the low alarm threshold."
       	::= { ubiEntitySensorEntry 9 }    
       	
   	ubiEntSensorName OBJECT-TYPE
        SYNTAX			DisplayString
        MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates the name of 
        	 the sensor entity."
       	::= { ubiEntitySensorEntry 10 }    
                                        
-- ***********************************************************
-- ubiTransceiverInfoTable
-- ***********************************************************
  
	ubiTransceiverInfoTable OBJECT-TYPE
    	SYNTAX          SEQUENCE OF UbiTransceiverInfoEntry 
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"This table contains objects which provide information 
        	 about the transceiver of physical entity."
    	::= { ubiTransceiver 2 }

	ubiTransceiverInfoEntry OBJECT-TYPE
    	SYNTAX          UbiTransceiverInfoEntry
    	MAX-ACCESS      not-accessible
    	STATUS          current
    	DESCRIPTION
        	"An entry containing management information applicable 
        	to the transceiver of a particular physical entity."
    	INDEX           { entPhysicalIndex  } 
    	::= { ubiTransceiverInfoTable 1 }
                                                
	UbiTransceiverInfoEntry ::= SEQUENCE {            
			ubiTcIdentifier           			UbiTcIdentifier,
			ubiTcVendorOUI						DisplayString,
			ubiTcVendorName						DisplayString,
			ubiTcVendorPartNumber				DisplayString,
			ubiTcVendorRevisionLevel			DisplayString,	
			ubiTcVendorSerialNumber				DisplayString,	
			ubiTcVendorManufacturingDate		DisplayString,	
			ubiTcWaveLength						Integer32,
			ubiTcConnector			    		UbiTcConnectorType,
			ubiTcLength							Integer32,   
	}
  
 	ubiTcIdentifier OBJECT-TYPE
    	SYNTAX          UbiTcIdentifier
     	MAX-ACCESS      read-only
    	STATUS          current    
    	DESCRIPTION
		"This variable indicates the transceiver indentifier.
		 valid value are:
		      	unknown(0),  
		    	other(1),
				gbic(2),
				module(3),
				sfp(4),
				xbi(5),
				xenpak(6),
				xfp(7),
				xff(8),
				xfp_e(9),
				xpak(10),
				x2(11)
		"
	   	::= { ubiTransceiverInfoEntry 1 }   
  
  	ubiTcVendorOUI OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION      
 			"This variable indicates a textual string containing 
			information about the IEEE company ID of transceiver vendor"  
    	::= { ubiTransceiverInfoEntry 2 }    

  	ubiTcVendorName OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"A textual string containing information about the
            transceiver name." 
    	::= { ubiTransceiverInfoEntry 3 }   

  	ubiTcVendorPartNumber OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"A textual string containing information about the
            part number of the transceiver." 
    	::= { ubiTransceiverInfoEntry 4 }   
 
  	ubiTcVendorRevisionLevel OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
       	    "A textual string containing information about the
             revision level of the transceiver part number." 
    	::= { ubiTransceiverInfoEntry 5 }   
 
  	ubiTcVendorSerialNumber OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
			"This variable indicates a textual string containing 
			information about the transceiver serial number."   	
       	::= { ubiTransceiverInfoEntry 6 }  
                                                 
  	ubiTcVendorManufacturingDate OBJECT-TYPE
    	SYNTAX          DisplayString
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates a manufacturing date 
        	of transceiver"
    	::= { ubiTransceiverInfoEntry 7 }    
       
  	ubiTcWaveLength OBJECT-TYPE
    	SYNTAX          Integer32      
    	UNITS			"Nanometer"
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates a wave length 
        	of transceiver." 
    	::= { ubiTransceiverInfoEntry 8 }        
       
  	ubiTcConnector OBJECT-TYPE
    	SYNTAX          UbiTcConnectorType
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates a connector type 
        	of transceiver."  
    	::= { ubiTransceiverInfoEntry 9 }    

  	ubiTcLength OBJECT-TYPE
    	SYNTAX          Integer32   
    	UNITS			"Meter"
    	MAX-ACCESS      read-only
    	STATUS          current
   		DESCRIPTION
        	"This variable indicates a length 
        	of transceiver." 
    	::= { ubiTransceiverInfoEntry 10 }    
                
                                                 
-- ***********************************************************
-- ubiEntityFRUMIBNotificationPrefix
-- ***********************************************************  
	ubiFRUInserted NOTIFICATION-TYPE
    	OBJECTS         { 
    					entPhysicalContainedIn,    
    					entPhysicalDescr,
    				  	entPhysicalName	  	 
    					}
    	STATUS          current
    	DESCRIPTION
        	"The ubiEntityFRUInserted notification indicates that a FRU was
        	inserted. The varbind for this notification indicates the
        	entPhysicalIndex of the inserted FRU, and the entPhysicalIndex
        	of the FRU's container."
   		::= { ubiFruNotifications 1 }

	ubiFRURemoved NOTIFICATION-TYPE
    	OBJECTS         { 
    					entPhysicalContainedIn,    
    					entPhysicalDescr,
    				  	entPhysicalName	  
    				    }
    	STATUS          current
    	DESCRIPTION
       		"The ubiEntityFRURemoved notification indicates that a FRU was
        	removed. The varbind for this notification indicates the
        	entPhysicalIndex of the removed FRU, and the entPhysicalIndex
        	of the FRU's container."
   		::= { ubiFruNotifications 2 }
 
-- ***********************************************************
-- ubiDdmMIBNotificationPrefix
-- ***********************************************************       
         
	ubiEntSensorThreshold NOTIFICATION-TYPE
    	OBJECTS {
    			entPhysicalDescr,  
    			ubiEntSensorEventStatus,
    			ubiEntSensorValue,       
    			ubiEntSensorAlarmHighThreshold,      
       			ubiEntSensorWarningHighThreshold,
    			ubiEntSensorWarningLowThreshold, 
    			ubiEntSensorAlarmLowThreshold, 
    	}             
    	STATUS          current
    	DESCRIPTION
        	"The ubiEntSensorThreshold notification indicates that 
        	the status of transceiver sensor was changed."
   	::= { ubiEntitySensorNotifications 1 }
          
 
-- ***********************************************************
-- ubiEntityMIBConformance
-- ***********************************************************  

-- conformance information

ubiEntityMIBCompliances  OBJECT IDENTIFIER		::= { ubiEntityMIBConformance 1 }
ubiEntityMIBGroups  OBJECT IDENTIFIER			::= { ubiEntityMIBConformance 2 }


--
-- compliance statements
--
	ubiEntityMIBCompliance MODULE-COMPLIANCE
    	STATUS          current
    	DESCRIPTION
        	"An Entity-MIB implementation can implement this group to
        	provide FRU status and control."
   	 	MODULE          -- this module
    	MANDATORY-GROUPS {
    					ubiEntityMIBModuleGroup,
    					ubiEntityMIBSlotGroup,
                        ubiEntityMIBNotificationGroup,
                        ubiEntiryMIBIEEE1588SlotGroup,
                        ubiEntityMIBTransceiverGroup
                        }

    	GROUP           ubiEntityMIBModuleGroup
    	DESCRIPTION
        	"The ubiEntityMIBModuleGroup must be implemented for
        	FRUs that are of module type."

    	GROUP           ubiEntityMIBSlotGroup
    	DESCRIPTION
        	"The ubiEntityMIBSlotGroup must be
        	implemented for FRUs that of slot type"
        	   
    	GROUP           ubiEntityMIBNotificationGroup
    	DESCRIPTION
        	"The ubiEntityMIBNotificationGroup must be
        	implemented for FRUs that have notification"           	
        
        GROUP			ubiEntiryMIBIEEE1588SlotGroup
        DESCRIPTION
        	"The ubiEntiryMIBIEEE1588SlotGroup must be
        	 implemented for FRUs that of slot for 
        	 IEEE 1588 specification."     
        GROUP		ubiEntityMIBTransceiverGroup
        DESCRIPTION
        	"The ubiEntityMIBTransceiverGroup must be implemented 
        	for transceiver."
    	::= { ubiEntityMIBCompliances 1 }

-- units of conformance

	ubiEntityMIBModuleGroup OBJECT-GROUP
    	OBJECTS         {
                        ubiEntityModuleAdminStatus,
                        ubiEntityModuleOperStatus,
                        ubiEntityModuleStatusLastChangeTime
                    	}
    	STATUS          current
    	DESCRIPTION
        	"The collection of objects which are used to get the
        	operational state and redundancy state of the modules"
    	::= { ubiEntityMIBGroups 1 }

	ubiEntitySlotGroup NOTIFICATION-GROUP
   		NOTIFICATIONS    { ubiEntitySlotOperStatus }
    	STATUS          current
    	DESCRIPTION
        	"The collection of objects which are used to get the
        	operational state and redundancy state of the slot."
    	::= { ubiEntityMIBGroups 2 }    
 
	ubiEntityMIBNotificationGroup OBJECT-GROUP
    	OBJECTS         { 
      						ubiEntityEnableFruControlNotification,
    						ubiEntityFRUInserted,
    					  	ubiEntityFRURemoved
    					}
    	STATUS          current
    	DESCRIPTION
        	"TThe collection of objects which are 
        	used to send a notification."
    	::= { ubiEntityMIBGroups 3 }


	ubiEntiryMIBIEEE1588SlotGroup   OBJECT-GROUP
    	OBJECTS         { 
      						ubiIEEE1588SlotOperStatus
      		}
    	STATUS          current
    	DESCRIPTION
        	"The collection of objects which are used to get the
        	operational state of the slot for IEEE 1588."
    	::= { ubiEntityMIBGroups 4 }

	
	ubiEntityMIBTransceiverGroup    OBJECT-GROUP
    	OBJECTS         { 
     		ubiEntSensorType,     
			ubiEntSensorScale,
			ubiEntSensorValue,
			ubiEntSensorEventStatus,
			ubiEntSensorEventUpdateTime,		
			ubiEntSensorAlarmHighThreshold,   
			ubiEntSensorWarningHighThreshold,    
			ubiEntSensorWarningLowThreshold	,
			ubiEntSensorAlarmLowThreshold,	      		
			ubiTcIdentifier,
			ubiTcVendorOUI,
			ubiTcVendorName,
			ubiTcVendorPartNumber,
			ubiTcVendorRevisionLevel,	
			ubiTcVendorSerialNumber,	
			ubiTcVendorManufacturingDate,	
			ubiTcWaveLength	,
			ubiTcConnector,
			ubiTcLength
		}
    	STATUS          current
    	DESCRIPTION
        	"The collection of objects which are used to get the
        	information of transceiver."
    	::= { ubiEntityMIBGroups 5 }


END