path: root/MIBS/zte/ZTE-AN-SOFTWARE-MIB

ZTE-AN-SOFTWARE-MIB    DEFINITIONS ::= BEGIN
    IMPORTS     
        DisplayString                     FROM SNMPv2-TC
        DateAndTime                       FROM SNMPv2-TC
        TruthValue                        FROM SNMPv2-TC
        MODULE-IDENTITY                   FROM SNMPv2-SMI
        OBJECT-TYPE                       FROM SNMPv2-SMI
        Integer32                         FROM SNMPv2-SMI
        NOTIFICATION-TYPE                 FROM SNMPv2-SMI
        zxAnSystem                        FROM ZTE-AN-SMI
        MODULE-COMPLIANCE                 FROM SNMPv2-CONF
        OBJECT-GROUP                      FROM SNMPv2-CONF
        NOTIFICATION-GROUP                FROM SNMPv2-CONF;


    zxAnSoftwareMib  MODULE-IDENTITY
        LAST-UPDATED    "201105260000Z"
        ORGANIZATION    "ZTE Corporation"
        CONTACT-INFO    "Zhou YuBin      ZTE Corporation
                         Mail: zhou.yubing@zte.com.cn
                         Tel : +86-21-68897315"
        DESCRIPTION     "This MIB defines zte Access Node software management."
        
        REVISION        "201105260000Z"
        DESCRIPTION
        "Initial version of this MIB module."
        ::=  {  zxAnSystem  30  }  
    
-------------------------------------------------------------------------------
-- Following management objects are defined.
-- 1. Card Running Software Information Table
-- 2. Subcard Running Software Information Table
-- 3. Saved Software Information Table
-- 4. Software Manual Update Management Table
-- 5. Software Manual Update Status Table
-- 6. Subcard Software Manual Update Status Table
-- 7. Software Automatic Update Check Management Table
-- 8. Software Automatic Update Management Table
-- 9. Software Swap Management Table
-- 10. Saved Patch Information Table
-- 11. Card Patch Running Status Information Table
-- 12. Subcard Running Patch Information Table
-- 13. Saved Patch Package Information Table
-- 14. Saved Patch Package File Information Table

-- Following notification objects are defined.
-- 21. Software Notification

-- Following conformance information is defined.
-- 31. Software Conformance

-------------------------------------------------------------------------------
    zxAnSwObjects                   OBJECT IDENTIFIER   ::=  {  zxAnSoftwareMib            2  }
    zxAnSwNotifications             OBJECT IDENTIFIER   ::=  {  zxAnSoftwareMib            3  }
  
    zxAnCardSwObjects               OBJECT IDENTIFIER   ::=  {  zxAnSwObjects              2  }
    zxAnSwUpdateObjects             OBJECT IDENTIFIER   ::=  {  zxAnSwObjects              3  }
    zxAnSwSwapObjects               OBJECT IDENTIFIER   ::=  {  zxAnSwObjects              4  }    
    zxAnCardPatchObjects            OBJECT IDENTIFIER   ::=  {  zxAnSwObjects              5  }    
    
    zxAnSwManualUpdateObjects       OBJECT IDENTIFIER   ::=  {  zxAnSwUpdateObjects        2  }
    zxAnSwManualUpdateGlobalObjects OBJECT IDENTIFIER   ::=  {  zxAnSwManualUpdateObjects  1  }
    zxAnSwAutoUpdateObjects         OBJECT IDENTIFIER   ::=  {  zxAnSwUpdateObjects        3  }
    zxAnSwAutoUpdateGlobalObjects   OBJECT IDENTIFIER   ::=  {  zxAnSwAutoUpdateObjects    1  }

    zxAnSwAutoUpdateChkObjects      OBJECT IDENTIFIER   ::=  {  zxAnSwAutoUpdateGlobalObjects  1  }
    zxAnSwAutoUpdateOperObjects     OBJECT IDENTIFIER   ::=  {  zxAnSwAutoUpdateGlobalObjects  2  }

    zxAnSwSwapGlobalObjects         OBJECT IDENTIFIER   ::=  {  zxAnSwSwapObjects          1  }
    
    zxAnSwAutoUpdateTraps           OBJECT IDENTIFIER   ::=  {  zxAnSwNotifications        1  }     
    
-------------------------------------------------------------------------------
-- 1.Card Running Software Information Table
-------------------------------------------------------------------------------
    zxAnSwCardRunningVerTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwCardRunningVerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the card version information."
        ::=  { zxAnCardSwObjects  2 }

    zxAnSwCardRunningVerEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwCardRunningVerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnCardTable."
        INDEX       {  zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot  }
        ::=  { zxAnSwCardRunningVerTable 1 }
        
    ZxAnSwCardRunningVerEntry  ::=  SEQUENCE {
        zxAnSwCardRack                Integer32,
        zxAnSwCardShelf               Integer32,
        zxAnSwCardSlot                Integer32,
        zxAnSwCardFileName            DisplayString,
        zxAnSwCardFileType            DisplayString,
        zxAnSwCardVersion             DisplayString,
        zxAnSwCardFileLen             Integer32,
        zxAnSwCardBuildTime           DateAndTime,
        zxAnSwCardBootwareFileName    DisplayString,
        zxAnSwCardBootwareFileType    DisplayString,
        zxAnSwCardBootwareVersion     DisplayString,
        zxAnSwCardBootwareFileLen     Integer32,
        zxAnSwCardBootwareBuildTime   DateAndTime,
        zxAnSwCardFirmware1FileName   DisplayString,
        zxAnSwCardFirmware1FileType   DisplayString,
        zxAnSwCardFirmware1Version    DisplayString,
        zxAnSwCardFirmware1FileLen    Integer32,
        zxAnSwCardFirmware1BuildTime  DateAndTime,        
        zxAnSwCardFirmware2FileName   DisplayString,
        zxAnSwCardFirmware2FileType   DisplayString,
        zxAnSwCardFirmware2Version    DisplayString,
        zxAnSwCardFirmware2FileLen    Integer32,
        zxAnSwCardFirmware2BuildTime  DateAndTime,       
        zxAnSwCardFirmware3FileName   DisplayString,
        zxAnSwCardFirmware3FileType   DisplayString,
        zxAnSwCardFirmware3Version    DisplayString,
        zxAnSwCardFirmware3FileLen    Integer32,
        zxAnSwCardFirmware3BuildTime  DateAndTime        
        }
        
    zxAnSwCardRack      OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The rack number"
        ::=  {  zxAnSwCardRunningVerEntry  1  }
        
    zxAnSwCardShelf     OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The shelf number"
        ::=  {  zxAnSwCardRunningVerEntry  2  } 
        
    zxAnSwCardSlot      OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The slot number"
        ::=  {  zxAnSwCardRunningVerEntry  3  }
        
    zxAnSwCardFileName                OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version file name of the card."
        ::=  {  zxAnSwCardRunningVerEntry  5  }

    zxAnSwCardFileType                OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version file type of the card."
        ::=  {  zxAnSwCardRunningVerEntry  6  }
        
    zxAnSwCardVersion              OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version tag of the card."
        ::=  {  zxAnSwCardRunningVerEntry  7  }      

    zxAnSwCardFileLen       OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version file length of the card."
        ::=  {  zxAnSwCardRunningVerEntry  8  }

    zxAnSwCardBuildTime       OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The time of version build. For example:
                        yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwCardRunningVerEntry  9  }   
        
    zxAnSwCardBootwareFileName         OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The bootrom file name of the card."
        ::=  {  zxAnSwCardRunningVerEntry  10  }

    zxAnSwCardBootwareFileType         OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The bootrom file type of the card."
        ::=  {  zxAnSwCardRunningVerEntry  11  }
        
    zxAnSwCardBootwareVersion              OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The bootrom tag of the card."
        ::=  {  zxAnSwCardRunningVerEntry  12  }      

    zxAnSwCardBootwareFileLen       OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The bootrom file length of the card."
        ::=  {  zxAnSwCardRunningVerEntry  13  }

    zxAnSwCardBootwareBuildTime       OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The time of version build. For example:
                        yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwCardRunningVerEntry  14  }   
 
    zxAnSwCardFirmware1FileName  OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file name of the card."
        ::=  {  zxAnSwCardRunningVerEntry  15  }

    zxAnSwCardFirmware1FileType OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file type of the card."
        ::=  {  zxAnSwCardRunningVerEntry  16  }
        
    zxAnSwCardFirmware1Version    OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware tag of the card."
        ::=  {  zxAnSwCardRunningVerEntry  17  }      

    zxAnSwCardFirmware1FileLen       OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file length of the card."
        ::=  {  zxAnSwCardRunningVerEntry  18  }

    zxAnSwCardFirmware1BuildTime OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION    "The time version build. For example:
                       yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwCardRunningVerEntry  19  } 

    zxAnSwCardFirmware2FileName  OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file name of the card."
        ::=  {  zxAnSwCardRunningVerEntry  20  }

    zxAnSwCardFirmware2FileType  OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file type of the card."
        ::=  {  zxAnSwCardRunningVerEntry  21  }
        
    zxAnSwCardFirmware2Version    OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware tag of the card."
        ::=  {  zxAnSwCardRunningVerEntry  22  }      

    zxAnSwCardFirmware2FileLen       OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file length of the card."
        ::=  {  zxAnSwCardRunningVerEntry  23  }

    zxAnSwCardFirmware2BuildTime  OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The time of version build. For example:
                         yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwCardRunningVerEntry  24  }   

    zxAnSwCardFirmware3FileName OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file name of the card."
        ::=  {  zxAnSwCardRunningVerEntry  25  }

    zxAnSwCardFirmware3FileType OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file type of the card."
        ::=  {  zxAnSwCardRunningVerEntry  26  }
        
    zxAnSwCardFirmware3Version  OBJECT-TYPE 
        SYNTAX        DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS    read-only
        STATUS        current
        DESCRIPTION   "The firmware tag of the card."
        ::=  {  zxAnSwCardRunningVerEntry  27  }      

    zxAnSwCardFirmware3FileLen       OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file length of the card."
        ::=  {  zxAnSwCardRunningVerEntry  28  }

    zxAnSwCardFirmware3BuildTime       OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The time of version build. For example:
                        yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwCardRunningVerEntry  29  }   

-------------------------------------------------------------------------------
-- 2. Subcard Running Software Information Table
-------------------------------------------------------------------------------
    zxAnSwSubcardRunningVerTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwSubcardRunningVerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the sub card version information."
        ::=  { zxAnCardSwObjects  3 }

    zxAnSwSubcardRunningVerEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwSubcardRunningVerEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnSwSubcardRunningVerTable."
        INDEX       {  zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot, 
                    zxAnSwSubcardSlot  }
        ::=  { zxAnSwSubcardRunningVerTable 1 }

    ZxAnSwSubcardRunningVerEntry  ::=  SEQUENCE {
        zxAnSwSubcardSlot                 Integer32,
        zxAnSwSubcardFileName             DisplayString,
        zxAnSwSubcardFileType             DisplayString,
        zxAnSwSubcardVersion              DisplayString,
        zxAnSwSubcardFileLen              Integer32,
        zxAnSwSubcardBuildTime            DateAndTime,
        zxAnSwSubcardBootwareFileName     DisplayString,
        zxAnSwSubcardBootwareFileType     DisplayString,
        zxAnSwSubcardBootwareVersion      DisplayString,
        zxAnSwSubcardBootwareFileLen      Integer32,
        zxAnSwSubcardBootwareBuildTime    DateAndTime,
        zxAnSwSubcardFirmwareFileName     DisplayString,
        zxAnSwSubcardFirmwareFileType     DisplayString,
        zxAnSwSubcardFirmwareVersion      DisplayString,
        zxAnSwSubcardFirmwareFileLen      Integer32,
        zxAnSwSubcardFirmwareBuildTime    DateAndTime        
        }

    zxAnSwSubcardSlot               OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The slot number of the subcard"
        ::=  {  zxAnSwSubcardRunningVerEntry  1  }
        
    zxAnSwSubcardFileName           OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version file name of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  3  }

    zxAnSwSubcardFileType           OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version file type of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  4  }
        
    zxAnSwSubcardVersion             OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version tag of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  5  }      

    zxAnSwSubcardFileLen             OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version file length of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  6  }

    zxAnSwSubcardBuildTime       OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The time of version build. For example:
                        yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwSubcardRunningVerEntry  7  }   
        
    zxAnSwSubcardBootwareFileName     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The bootrom file name of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  8  }

    zxAnSwSubcardBootwareFileType     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The bootrom file type of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  9  }
        
    zxAnSwSubcardBootwareVersion      OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The bootrom tag of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  10  }      

    zxAnSwSubcardBootwareFileLen      OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The bootrom file length of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  11  }

    zxAnSwSubcardBootwareBuildTime    OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The time of version build. For example:
                        yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwSubcardRunningVerEntry  12  }   
 
    zxAnSwSubcardFirmwareFileName     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file name of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  13  }

    zxAnSwSubcardFirmwareFileType     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file type of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  14  }
        
    zxAnSwSubcardFirmwareVersion      OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware tag of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  15  }      

    zxAnSwSubcardFirmwareFileLen      OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The firmware file length of the card."
        ::=  {  zxAnSwSubcardRunningVerEntry  16  }

    zxAnSwSubcardFirmwareBuildTime    OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The time of version build. For example:
                        yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwSubcardRunningVerEntry  17  }   
  
        
-------------------------------------------------------------------------------
-- 3.Saved Software information Table
-------------------------------------------------------------------------------
    zxAnSwImageTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwImageEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the saved version information in 
                    version area MP."
        ::=  { zxAnCardSwObjects  4 }

    zxAnSwImageEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwImageEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnSwImageTable."
        INDEX   {zxAnSwCardRack,zxAnSwCardShelf,zxAnSwCardSlot, 
                zxAnSwImageFileName}
        ::=  { zxAnSwImageTable 1 }

    ZxAnSwImageEntry  ::=  SEQUENCE {
        zxAnSwImageFileName               DisplayString,
        zxAnSwImageFileType               DisplayString,
        zxAnSwImageVersion                DisplayString,
        zxAnSwImageFileLen                Integer32,
        zxAnSwImageBuildTime              DateAndTime,
        zxAnSwImageActiveStatus           INTEGER,
        zxAnSwImageDownloadTime           DateAndTime
        }
     
        
    zxAnSwImageFileName          OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     ""
        ::=  {  zxAnSwImageEntry  1  }

    zxAnSwImageFileType          OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version file type on the saved area."
        ::=  {  zxAnSwImageEntry  2  }
        
    zxAnSwImageVersion           OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version tag on the saved area."
        ::=  {  zxAnSwImageEntry  3  }      

    zxAnSwImageFileLen           OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version file length on the saved area."
        ::=  {  zxAnSwImageEntry  4  }

    zxAnSwImageBuildTime       OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The time of version build. For example:
                        yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwImageEntry  5  } 

    zxAnSwImageActiveStatus      OBJECT-TYPE 
        SYNTAX          INTEGER  
                {                       
                       active(1),
                       inactive(2),
                       none(3)
                }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The status of saved MP version on the saved area.                        
                        active(1):   active MP version.
                        inactive(2): inactive MP version.
                        none(3):     NP version, don't have active attribute.
        "
        ::=  {  zxAnSwImageEntry  6  }    
        
    zxAnSwImageDownloadTime       OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The downloading time of the version file."
        ::=  {  zxAnSwImageEntry  7  }
        
-------------------------------------------------------------------------------
-- 4 Software Manual Update Management Table
-------------------------------------------------------------------------------
    zxAnSwManualUpdateRack      OBJECT-TYPE     
        SYNTAX      Integer32 
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION  
            "The rack number.    
            The multi-variables binding rule should be complied 
            with when a manager manual updates software. According 
            to this rule,all the related mib variables must be 
            included in one SNMP set operation. 
                    
            There are two types of variables: mandatory and 
            optional. All of the mandatory variables must be 
            included in one SNMP set operation. Optional variables 
            may be included in one SNMP set operation with the 
            mandatory variables, but must not be used alone. 
                    
            To manual update software, the mandatory and optional 
            variables are as follows:
            mandatoty: zxAnSwManualUpdateRack, 
                       zxAnSwManualUpdateShelf,
                       zxAnSwManualUpdateSlotList, 
                       zxAnSwManualUpdateSwType
            optional : none
                        
            To manual update subcard software, the mandatory and 
            optional variables are as follows:
            mandatoty: zxAnSwManualUpdateRack, 
                       zxAnSwManualUpdateShelf,
                       zxAnSwManualUpdateSlotList, 
                       zxAnSwManualUpdateSwType,
                       zxAnSwManualUpdateSubcardList
            optional : none
            "
        ::=  {  zxAnSwManualUpdateGlobalObjects  1  }
        
    zxAnSwManualUpdateShelf     OBJECT-TYPE     
        SYNTAX      Integer32 
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION 
            "The shelf number. 
            This variable must comply with the multi-variables 
            binding rule described in zxAnSwManualUpdateRack." 
        ::=  {  zxAnSwManualUpdateGlobalObjects  2  }

    zxAnSwManualUpdateSlotList  OBJECT-TYPE     
        SYNTAX      DisplayString  (SIZE (0 .. 64))  
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION 
            "The slot number. updating version file from MP to NP.
            They can be updated in batch. For example: '1,2,3'
            This variable must comply with the multi-variables 
            binding rule described in zxAnSwManualUpdateRack."
        ::=  {  zxAnSwManualUpdateGlobalObjects  3  }

    zxAnSwManualUpdateSwType     OBJECT-TYPE     
        SYNTAX      INTEGER {
            bootware(1)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION     
            "The software type is special to update.
            This variable must comply with the multi-variables
            binding rule described in zxAnSwManualUpdateRack.
            bootware(1): update bootware."
        ::=  {  zxAnSwManualUpdateGlobalObjects  4  }
        
    zxAnSwManualUpdateSubcardList   OBJECT-TYPE     
        SYNTAX      DisplayString  (SIZE (0 .. 64))  
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION     
            "The subcard number. updating version file from MP to subcard.
            They can be updated in batch. For example: '1,2,3'
            This variable must comply with the multi-variables 
            binding rule described in zxAnSwManualUpdateRack.
            If zxAnSwManualUpdateSlotList is '1,2' and 
            zxAnSwManualUpdateSubcardList is '3,4', the actual operation object
            like 'slot.subcard' is '1.3', '1.4', '2.3', '2.4'."
        ::=  {  zxAnSwManualUpdateGlobalObjects  5  }

-------------------------------------------------------------------------------
-- 5. Software Manual Update Status Table
-------------------------------------------------------------------------------
    zxAnSwManualUpdateStatusTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwManualUpdateStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the version updating status 
                    information."
        ::=  { zxAnSwManualUpdateObjects  5 }

    zxAnSwManualUpdateStatusEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwManualUpdateStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnSwManualUpdateStatusTable."
        INDEX       {  zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot,
                    zxAnSwManualUpdateSoftwareType  }
        ::=  { zxAnSwManualUpdateStatusTable 1 }

    ZxAnSwManualUpdateStatusEntry  ::=  SEQUENCE {
        zxAnSwManualUpdateSoftwareType  INTEGER,
        zxAnSwManualUpdateStatus        INTEGER,
        zxAnSwManualFailedReason        INTEGER
        }

    zxAnSwManualUpdateSoftwareType       OBJECT-TYPE 
        SYNTAX          INTEGER
                        {
                              bootware(1)
                              -- Update bootware.
                        }
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The software type when updating version."
        ::=  {  zxAnSwManualUpdateStatusEntry  1  }     

    zxAnSwManualUpdateStatus       OBJECT-TYPE 
        SYNTAX          INTEGER {negotiating(1),downloading(2),failed(3),
                        success(4),sameversion(5)}
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version status when updating version.
                        negotiating(1):negotiating not starting
                        downloading(2):updating from MP
                        failed(3):     update failed
                        success(4):    update successly
                        sameVersion(5):not need update
                        "
        ::=  {  zxAnSwManualUpdateStatusEntry  2  }             

    zxAnSwManualFailedReason       OBJECT-TYPE 
        SYNTAX          INTEGER
                  {
                    noError(1),
                      -- no error.
                      
                    noSupportCardHwVersion(2), 
                      -- control card doesn't support the current card hardware
                      -- version.
                      
                    mismatchCardHwVersion (3),
                      -- control card's configuration and the current card
                      -- hardware version are mismatch.
                      
                    mismatchCardConfData  (4),
                      -- control card's configuration and the current card
                      -- configuration data are mismatch.
                    
                    noSwInNe              (5),
                      -- software for this card doesn't exist in control card.
                      
                    cardUpdateSwFailed    (6)
                      -- the current card software update failed.
                      
                  }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The reason when updating version failed."
        ::=  {  zxAnSwManualUpdateStatusEntry  3  }    
        
-------------------------------------------------------------------------------
-- 6. Subcard Software Manual Update Status Table
-------------------------------------------------------------------------------
    zxAnSwSubcardMUpdateStatusTable    OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwSubcardMUpdateStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "This table includes the subcard software updating status 
            information."
        ::= { zxAnSwManualUpdateObjects 6 }

    zxAnSwSubcardMUpdateStatusEntry    OBJECT-TYPE
        SYNTAX      ZxAnSwSubcardMUpdateStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "An entry in zxAnSwSubcardMUpdateStatusTable."
        INDEX   { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot,
                  zxAnSwSubcardSlot, zxAnSwSubcardMUpdateSoftwareType }
        ::= { zxAnSwSubcardMUpdateStatusTable 1 }

    ZxAnSwSubcardMUpdateStatusEntry ::= SEQUENCE {
        zxAnSwSubcardMUpdateSoftwareType    INTEGER,
        zxAnSwSubcardMUpdateStatus          INTEGER,
        zxAnSwSubcardMUpdateFailedReason    INTEGER
        }
        
    zxAnSwSubcardMUpdateSoftwareType   OBJECT-TYPE 
        SYNTAX      INTEGER {
            bootware(1)
        }
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "The software type when updating subcard software.
            bootware(1): update bootware."
        ::= { zxAnSwSubcardMUpdateStatusEntry 1 }     
        

    zxAnSwSubcardMUpdateStatus         OBJECT-TYPE 
        SYNTAX      INTEGER {
            negotiating(1),
            downloading(2),
            failed(3),
            success(4),
            sameversion(5)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION 
            "The updating status when updating subcard software.
            negotiating(1): negotiating not starting.
            downloading(2): updating from MP.
            failed(3): update failed.
            success(4): update successfully.
            sameVersion(5): not need to update.
            "
        ::= { zxAnSwSubcardMUpdateStatusEntry 2 }             

    zxAnSwSubcardMUpdateFailedReason     OBJECT-TYPE 
        SYNTAX      INTEGER {
            noError(1),                    
            noSupportCardHwVersion(2),     
            mismatchCardHwVersion(3),
            mismatchCardConfData(4),
            noSwInNe(5),
            cardUpdateSwFailed(6)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION 
            "The reason when updating subcard software failed.
            noError(1): no error.
            noSupportCardHwVersion(2): control card doesn't support the 
            current card hardware version.
            mismatchCardHwVersion(3): control card's configuration and the
            current card hardware version are mismatch.
            mismatchCardConfData(4): control card's configuration and the
            current card configuration data are mismatch.
            noSwInNe(5): software for this card doesn't exist in control card.
            cardUpdateSwFailed(6): the current card software update failed."
        ::= { zxAnSwSubcardMUpdateStatusEntry 3 }    
    
-------------------------------------------------------------------------------
-- 7. Software Automatic Update Check Management Table
------------------------------------------------------------------------------- 
    zxAnSwAutoUpdateChkEnable OBJECT-TYPE 
        SYNTAX      INTEGER{
            enable(1),
            disable(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION 
                    "Enable or disable the software periodic check function.   
                    
                    The multi-variables binding rule should be complied with 
                    when a software periodic check. According to this rule, 
                    all the related mib variables must be included in one SNMP 
                    set operation. 
                    
                    There are two types of variables: mandatory and optional.
                    All of the mandatory variables must be included in one SNMP
                    set operation. Optional variables may be included in one 
                    SNMP set operation with the mandatory variables, but must 
                    not be used alone. 
                    
                    To configure software periodic check(except disable 
                    software periodic check function), the mandatory and 
                    optional variables are as follows:
                    mandatoty: zxAnSwAutoUpdateChkEnable, 
                               zxAnSwAutoUpdateChkStartTime,
                               zxAnSwAutoUpdateChkInterval
                    optional : none
                    "
                    
        DEFVAL    { disable }  
        ::=  {  zxAnSwAutoUpdateChkObjects  1 }
        
    zxAnSwAutoUpdateChkStartTime OBJECT-TYPE 
        SYNTAX      DateAndTime
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION     
            "The start time of software periodic check.            
            For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).   
            
            This variable must comply with the multi-variables binding 
            rule described in zxAnSwAutoUpdateChkEnable.
            "          
        ::=  {  zxAnSwAutoUpdateChkObjects  2  }
     
    zxAnSwAutoUpdateChkInterval OBJECT-TYPE 
        SYNTAX      Integer32(0..8760)
        UNITS       "hours"   
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION 
            "The interval of software periodic check. 
            Value 0 means unconfigured. 
            Unit is hour.
            
            This variable must comply with the multi-variables binding 
            rule described in zxAnSwAutoUpdateChkEnable.
            " 
        DEFVAL    { 24 }      
        ::=  {  zxAnSwAutoUpdateChkObjects  3  }
        
    zxAnSwAutoUpdateCurrChkStartTime OBJECT-TYPE 
        SYNTAX      DateAndTime
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION     
            "The start time of current software periodic check.            
            For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."      
        ::=  {  zxAnSwAutoUpdateChkObjects  20  }
    
    zxAnSwAutoUpdateChkDifferFiles OBJECT-TYPE 
        SYNTAX      DisplayString(SIZE(0..255))
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION 
            "The different files name between NE and file server. 
            File name is separated by ',', For example:xxx,xxx,xxx."     
        ::=  {  zxAnSwAutoUpdateChkObjects  21  }
        
    zxAnSwAutoUpdateChkStatus OBJECT-TYPE 
        SYNTAX      INTEGER  {
            notStarted(1),
            inProgress(2),
            success(3),
            failed(4)               
        }       
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION     
            "The status of software periodic check.
            notStarted(1): Automatic update check not start     
            inProgress(2): Automatic update check in progress
            success(3):    Automatic update check successful
            failed(4):     Automatic update check failed  
            "
        ::=  {  zxAnSwAutoUpdateChkObjects  22  }

    zxAnSwAutoUpdateChkFailedReason OBJECT-TYPE     
        SYNTAX      INTEGER  {
            noError(1),
            fileServerUnconfigured(2),
            fileServerConnectFailed(3),
            fileServerLoginFailed(4), 
            fileServerPathError(5),
            fileServerProtocolTypeError(6),          
            deviceCheckFailed(7),             
            otherErrors(255)            
        }         
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION     
            "The failed reason of software periodic check.
            noError(1):                       Automatic update check successful
                                              or not start
            fileServerUnconfigured(2):        Automatic update file server
                                              is not configure
            fileServerConnectFailed(3):       File server connect failed
            fileServerLoginFailed(4):         File server configure is not
                                              correct 
            fileServerPathError(5):           File server configure path is 
                                              not correct 
            fileServerProtocolTypeError(6):   File server configure protocol 
                                              type is not correct           
            deviceCheckFailed(7):             NE flash error             
            otherErrors(255):                 Error is not include above list                 
            "
        ::=  {  zxAnSwAutoUpdateChkObjects  23  } 

-------------------------------------------------------------------------------
-- 8. Software Automatic Update Management Table
------------------------------------------------------------------------------- 
    zxAnSwAutoUpdateAction OBJECT-TYPE 
        SYNTAX      INTEGER{
            start(1)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION 
            "The automatic update action. 
            It means to start the automatic update progress."
        ::=  {  zxAnSwAutoUpdateOperObjects  1  } 
        
    zxAnSwAutoUpdateActiveEnable OBJECT-TYPE 
        SYNTAX      INTEGER{
            enable(1),
            disable(2)
        }
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION 
            "Enable or disable the software active function. Active means to 
            reset card except control card."
        DEFVAL    { enable } 
        ::=  {  zxAnSwAutoUpdateOperObjects  2  } 
        
    zxAnSwAutoUpdateSwBackupEnable OBJECT-TYPE 
        SYNTAX      INTEGER{
            enable(1),
            disable(2)
        }   
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION 
            "Enable or disable the version file backup function."
        DEFVAL    { enable }  
        ::=  {  zxAnSwAutoUpdateOperObjects  3  } 
        
    zxAnSwAutoUpdateStatus OBJECT-TYPE
        SYNTAX      INTEGER{
            notStarted(1),
            updateStarting(2),
            backingUpFile(3),
            versionFileAnalyzing(4),
            versionFileDownloading(5),
            versionFileDownloadComplete(6),
            masterSlaveSynchronizing(7),
            masterSlaveSyncComplete(8), 
            versionFileLoading(9),            
            bootUpdating(10),
            bootUpdateComplete(11),
            updateSuccess(12),
            readyToReboot(13),
            sameVersion(14),
            updateFailed(255)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION 
        "The status of automatic update.
        notStarted(1):                 Not start
        updateStarting(2):             Update Start
        backingUpFile(3):              Backup software before update
        versionFileAnalyzing(4):       Software analyzing
        versionFileDownloading(5):     Software downloading
        versionFileDownloadComplete(6):Software download completed
        masterSlaveSynchronizing(7):   Synchronize software to slave board
        masterSlaveSyncComplete(8):    Synchronize software completed
        versionFileLoading(9):         Load software to card            
        bootUpdating(10):              Update bootrom
        bootUpdateComplete(11):        Update bootrom completed
        updateSuccess(12):             Update successful
        readyToReboot(13):             Update had beed finished,ready to reboot
        sameVersion(14):               Update is not need for same version
        updateFailed(255):             Update failed
        "
        ::=  {  zxAnSwAutoUpdateOperObjects  20  }

    zxAnSwAutoUpdateCurrFileName OBJECT-TYPE 
        SYNTAX      DisplayString(SIZE(0..64)) 
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION     
            "The name of current file which is updated."
        ::=  {  zxAnSwAutoUpdateOperObjects  21  } 

    zxAnSwAutoUpdateCurrFileSize OBJECT-TYPE 
        SYNTAX      Integer32
        UNITS       "bytes"
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION     
            "The size of current file which is updated."
        ::=  {  zxAnSwAutoUpdateOperObjects  22  }          
    
    zxAnSwAutoUpdateCurrFileProgress OBJECT-TYPE 
        SYNTAX      Integer32(0..100)
        UNITS       "percent"   
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION 
             "The updating progress of current file." 
        ::=  {  zxAnSwAutoUpdateOperObjects  23  }

    zxAnSwAutoUpdateTotalFiles OBJECT-TYPE     
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION     
            "Total count of files will be updated."
        ::=  {  zxAnSwAutoUpdateOperObjects  24  }     

    zxAnSwAutoUpdateSuccessFiles OBJECT-TYPE     
        SYNTAX      Integer32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION     
            "Count of files which are updated successfully."           
        ::=  {  zxAnSwAutoUpdateOperObjects  25  }

    zxAnSwAutoUpdateFailedReason OBJECT-TYPE
        SYNTAX      INTEGER{
            noError(1),
            backupDataError(2),
            backupLogError(3),
            backupConfigurationError(4),
            backupVersionFileError(5),
            backupOtherError(6),
            analyzingConfigurationError(7),
            analyzingVersionFileError(8),
            diskFull(9),
            downloadingVersionFileError(10),
            updateVersionFileError(11),
            updateBootError(12),
            masterSlaveSynchronizeError(13),
            updateConflict(14),
            unavailableServer(15),
            slaveCardNotInService(16),
            fileNotExist(17),
            otherErrors(255)
        }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION 
            "The failed reason of automatic update.
            noError(1),                     Update is not start or successful
            backupDataError(2),             Backup data failed
            backupLogError(3),              Backup log failed
            backupConfigurationError(4),    Backup configuration failed
            backupVersionFileError(5),      Backup software failed
            backupOtherError(6),            Backup file failed is not above 
                                            list
            analyzingConfigurationError(7), Analyze configuration error
            analyzingVersionFileError(8),   Analyze software error
            diskFull(9),                    NE disk is full
            downloadingVersionFileError(10),Download software failed
            updateVersionFileError(11),     Update software failed
            updateBootError(12),            Update bootrom failed
            masterSlaveSynchronizeError(13),Synchronize software to slave board
                                            failed
            updateConflict(14),             Other update is executing
            unavailableServer(15),          File server configure failed
            slaveCardNotInService(16),      Slave board is not inservice
            fileNotExist(17),               File not exist on server
            otherErrors(255)                Other errors is not list above
            "
        ::=  {  zxAnSwAutoUpdateOperObjects  26  }  

-------------------------------------------------------------------------------
-- 9. Software Swap Management Table
------------------------------------------------------------------------------- 
    zxAnSwSwapRack      OBJECT-TYPE     
        SYNTAX          Integer32 
        MAX-ACCESS      read-write
        STATUS        current
        DESCRIPTION   " The Rack No. is used for swap version .
                      The multi-variables binding rule should be complied 
                      with when swap software. According to this rule, 
                      all the related mib variables must be included in one 
                      SNMP set operation. 
                   
                      There are two types of variables: mandatory and optional.
                      All of the mandatory variables must be included in one 
                      SNMP set operation. Optional variables may be included 
                      in one SNMP set operation with the mandatory variables, 
                      but must not be used alone. 
                   
                      To swap software, the mandatory and optional variables 
                      are as follows:
                      mandatoty:zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot
                      optional :none
                      "       
                        
        ::=  {  zxAnSwSwapGlobalObjects  1  }
        
    zxAnSwSwapShelf   OBJECT-TYPE     
        SYNTAX          Integer32 
        MAX-ACCESS      read-write
        STATUS        current
        DESCRIPTION   " The Shelf number is used for swap version.    
                     
                      This variable must comply with the multi-variables 
                      binding rule described in zxAnSwSwapRack.
                      "
                        
        ::=  {  zxAnSwSwapGlobalObjects  2  }

    zxAnSwSwapSlot    OBJECT-TYPE     
        SYNTAX          Integer32
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION   " The slot number is used for swap version.
                      
                      This variable must comply with the multi-variables
                      binding rule described in zxAnSwSwapRack.
                      "        
                        
        ::=  {  zxAnSwSwapGlobalObjects  3  }     

------------------------------------------------------------------------------
-- 10. Saved Patch Information Table
------------------------------------------------------------------------------        
    zxAnSwSavedPatchTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwSavedPatchEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the saved patch information."
        ::=  { zxAnCardPatchObjects  2 }

    zxAnSwSavedPatchEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwSavedPatchEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnSwSavedPatchTable."
        INDEX       { zxAnSwPatchRack,zxAnSwPatchShelf,
                      zxAnSwPatchSlot,zxAnSwPatchName }
        ::=  { zxAnSwSavedPatchTable 1 }

    ZxAnSwSavedPatchEntry  ::=  SEQUENCE {
        zxAnSwPatchRack             Integer32,
        zxAnSwPatchShelf            Integer32,
        zxAnSwPatchSlot             Integer32,
        zxAnSwPatchName             DisplayString,
        zxAnSwPatchOwnerSwVersion   DisplayString,
        zxAnSwPatchVersion          DisplayString,
        zxAnSwPatchSize             Integer32,
        zxAnSwPatchBuildTime        DateAndTime,
        zxAnSwPatchConfActiveStatus INTEGER,
        zxAnSwPatchDescription      DisplayString
    }

    zxAnSwPatchRack     OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The rack number."
        ::=  {  zxAnSwSavedPatchEntry  1  }

    zxAnSwPatchShelf    OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The shelf number."
        ::=  {  zxAnSwSavedPatchEntry  2  }

    zxAnSwPatchSlot     OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The slot number."
        ::=  {  zxAnSwSavedPatchEntry  3  }        
        
    zxAnSwPatchName     OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) ) 
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The patch file name."
        ::=  {  zxAnSwSavedPatchEntry  4  }

    zxAnSwPatchOwnerSwVersion  OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The software version of the patch belonging to."
        ::=  {  zxAnSwSavedPatchEntry  5  }

    zxAnSwPatchVersion  OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version tag of the patch."
        ::=  {  zxAnSwSavedPatchEntry  6  }

    zxAnSwPatchSize OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "byte"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The patch file length."
        ::=  {  zxAnSwSavedPatchEntry  7  }

    zxAnSwPatchBuildTime  OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION    "The time of patch build. For example:
                        yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwSavedPatchEntry  8  }

    zxAnSwPatchConfActiveStatus  OBJECT-TYPE 
        SYNTAX      INTEGER{
            activated(1),
            deactivated(2)
            }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION     "The configured active status of the patch file.
                        activated  -- to activate the patch file.
                        deactivated -- to deactivate the patch file."
        DEFVAL { deactivated }
        ::=  {  zxAnSwSavedPatchEntry  9  }

    zxAnSwPatchDescription  OBJECT-TYPE 
        SYNTAX          DisplayString ( SIZE ( 0 .. 255  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The patch description."
        ::=  {  zxAnSwSavedPatchEntry  10  }

------------------------------------------------------------------------------
-- 11. Card Patch Running Status Information Table
------------------------------------------------------------------------------    
    zxAnSwCardPatchRunStatusTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwCardPatchRunStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "This table includes the patch running status information of the 
             card."
        ::=  { zxAnCardPatchObjects  3 }

    zxAnSwCardPatchRunStatusEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwCardPatchRunStatusEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnSwCardPatchRunStatusTable."
        INDEX       
            {  zxAnSwPatchRack, 
               zxAnSwPatchShelf,
               zxAnSwPatchSlot, 
               zxAnSwCardPatchName  }
        ::=  { zxAnSwCardPatchRunStatusTable 1 }

    ZxAnSwCardPatchRunStatusEntry  ::=  SEQUENCE {
        zxAnSwCardPatchName            DisplayString,
        zxAnSwCardPatchOwnerSwVersion  DisplayString,
        zxAnSwCardPatchVersion         DisplayString,
        zxAnSwCardPatchSize            Integer32,
        zxAnSwCardPatchBuildTime       DateAndTime,
        zxAnSwCardPatchActivatedTime   DateAndTime,
        zxAnSwCardPatchDescription     DisplayString,
        zxAnSwCardPatchRunningStatus   INTEGER
        }

    zxAnSwCardPatchName  OBJECT-TYPE 
        SYNTAX          DisplayString (SIZE (0..64))
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The patch file name of the card."
        ::=  {  zxAnSwCardPatchRunStatusEntry  1  }
    
    zxAnSwCardPatchOwnerSwVersion  OBJECT-TYPE
        SYNTAX          DisplayString (SIZE (0..64))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The software version of the patch belonging to."
        ::=  {  zxAnSwCardPatchRunStatusEntry  2  }

    zxAnSwCardPatchVersion  OBJECT-TYPE 
        SYNTAX          DisplayString (SIZE (0..64))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version tag of the patch."
        ::=  {  zxAnSwCardPatchRunStatusEntry  3  }

    zxAnSwCardPatchSize  OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "byte"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The patch file length."
        ::=  {  zxAnSwCardPatchRunStatusEntry  4  }
    
    zxAnSwCardPatchBuildTime  OBJECT-TYPE
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION    "The time of patch build. For example:
                       yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwCardPatchRunStatusEntry  5  }

    zxAnSwCardPatchActivatedTime  OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION    "The time of the patch activated. For example:
                       yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwCardPatchRunStatusEntry  6  }

    zxAnSwCardPatchDescription  OBJECT-TYPE 
        SYNTAX          DisplayString (SIZE (0..255))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The patch description."
        ::=  {  zxAnSwCardPatchRunStatusEntry  7  }

    zxAnSwCardPatchRunningStatus  OBJECT-TYPE 
        SYNTAX      INTEGER{
            activatingSucceeded(1),
            activatingFailed(2),
            waitingToBeActivated(3),
            resettingCardNeeded(4),
            mismatched(5)
            }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
            "The patch running status.
             activatingSucceeded(1) : value 1 means the activating operation 
                                      of the patch file is succeeded.
             activatingFailed(2)    : value 2 means the activating operation 
                                      of the patch file is failed.
             waitingToBeActivated(3): value 3 means the patch file is waiting 
                                      to be activated.
             resettingCardNeeded(4) : value 4 means the patch file has been 
                                      successfully activated and the card 
                                      needs to be reset.
             mismatched(5)          : value 5 means the version of the patch 
                                      file is not matched with the version of
                                      the card software."
        ::=  {  zxAnSwCardPatchRunStatusEntry  8  }

------------------------------------------------------------------------------
-- 12. Subcard Running Patch Information Table
------------------------------------------------------------------------------    
    zxAnSwSubcardRunningPatchTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwSubcardRunningPatchEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "This table includes the subcard patch information."
        ::=  { zxAnCardPatchObjects  4 }

    zxAnSwSubcardRunningPatchEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwSubcardRunningPatchEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION "An entry in zxAnSwSubcardRunningPatchTable."
        INDEX       {  zxAnSwPatchRack,zxAnSwPatchShelf,
                       zxAnSwPatchSlot,zxAnSwPatchSubcardSlot, 
                       zxAnSwSubcardPatchName }
        ::=  { zxAnSwSubcardRunningPatchTable 1 }

    ZxAnSwSubcardRunningPatchEntry  ::=  SEQUENCE {
        zxAnSwPatchSubcardSlot           Integer32,
        zxAnSwSubcardPatchName           DisplayString,
        zxAnSwSubcardPatchOwnerSwVersion DisplayString,
        zxAnSwSubcardPatchVersion        DisplayString,
        zxAnSwSubcardPatchSize           Integer32,
        zxAnSwSubcardPatchBuildTime      DateAndTime,
        zxAnSwSubcardPatchActivatedTime  DateAndTime,
        zxAnSwSubcardPatchDescription    DisplayString
        }

    zxAnSwPatchSubcardSlot  OBJECT-TYPE 
        SYNTAX          Integer32
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The slot number of the subcard."
        ::=  {  zxAnSwSubcardRunningPatchEntry  1  }

    zxAnSwSubcardPatchName      OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The file name of the patch "
        ::=  {  zxAnSwSubcardRunningPatchEntry  2  }

    zxAnSwSubcardPatchOwnerSwVersion  OBJECT-TYPE
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The software version of the patch belonging to."
        ::=  {  zxAnSwSubcardRunningPatchEntry  3  }

    zxAnSwSubcardPatchVersion  OBJECT-TYPE 
        SYNTAX          DisplayString  ( SIZE ( 0 .. 64  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version tag of the patch."
        ::=  {  zxAnSwSubcardRunningPatchEntry  4  }

    zxAnSwSubcardPatchSize OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "byte"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The patch file length."
        ::=  {  zxAnSwSubcardRunningPatchEntry  5  }

    zxAnSwSubcardPatchBuildTime  OBJECT-TYPE
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION    "The time of patch build. For example:
                       yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwSubcardRunningPatchEntry  6  }

    zxAnSwSubcardPatchActivatedTime  OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION    "The time of the patch activated. For example:
                       yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
        ::=  {  zxAnSwSubcardRunningPatchEntry  7  }

    zxAnSwSubcardPatchDescription  OBJECT-TYPE 
        SYNTAX          DisplayString ( SIZE ( 0 .. 255  ) )
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The patch description."
        ::=  {  zxAnSwSubcardRunningPatchEntry  8  }

------------------------------------------------------------------------------
-- 13. Saved Patch Package information Table
------------------------------------------------------------------------------
    zxAnSwSavedPatchPackageTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwSavedPatchPackageEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "This table includes the saved patch package information."
        ::=  { zxAnCardPatchObjects  5 }

    zxAnSwSavedPatchPackageEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwSavedPatchPackageEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "An entry in zxAnSwSavedPatchPackageTable."
        INDEX
            { zxAnSwPatchRack,
              zxAnSwPatchShelf,
              zxAnSwPatchSlot,
              zxAnSwPatchPkgName }
        ::=  { zxAnSwSavedPatchPackageTable 1 }

    ZxAnSwSavedPatchPackageEntry  ::=  SEQUENCE {
        zxAnSwPatchPkgName               DisplayString,
        zxAnSwPatchPkgVersion            DisplayString,
        zxAnSwPatchPkgSize               Integer32,
        zxAnSwPatchPkgBuildTime          DateAndTime,
        zxAnSwPatchPkgDescription        DisplayString,   
        zxAnSwPatchPkgConfActiveStatus   INTEGER,
        zxAnSwPatchPkgActualActiveStatus INTEGER
    }

    zxAnSwPatchPkgName     OBJECT-TYPE 
        SYNTAX          DisplayString (SIZE (1..64))
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     "The name of the patch package."
        ::=  {  zxAnSwSavedPatchPackageEntry  1  }

    zxAnSwPatchPkgVersion  OBJECT-TYPE 
        SYNTAX          DisplayString (SIZE (0..64))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The version of the patch package."
        ::=  {  zxAnSwSavedPatchPackageEntry  2  }

    zxAnSwPatchPkgSize OBJECT-TYPE 
        SYNTAX          Integer32
        UNITS           "byte"
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The size of the patch package."
        ::=  {  zxAnSwSavedPatchPackageEntry  3  }

    zxAnSwPatchPkgBuildTime  OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION    "The build time of patch package."
        ::=  {  zxAnSwSavedPatchPackageEntry  4  }

    zxAnSwPatchPkgDescription  OBJECT-TYPE 
        SYNTAX          DisplayString (SIZE (0..255))
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     "The description of the patch package."
        ::=  {  zxAnSwSavedPatchPackageEntry  5  }

    zxAnSwPatchPkgConfActiveStatus  OBJECT-TYPE 
        SYNTAX      INTEGER{
            activated(1),
            deactivated(2)
            }
        MAX-ACCESS      read-write
        STATUS          current
        DESCRIPTION     
            "The configured active status of the patch package.
             activated(1)   : value 1 means the configured active status of
                              the patch package is activated.
             deactivated(2) : value 2 means the configured active status of
                              the patch package is deactivated."
        DEFVAL { deactivated }
        ::=  {  zxAnSwSavedPatchPackageEntry  6  }

    zxAnSwPatchPkgActualActiveStatus OBJECT-TYPE 
        SYNTAX      INTEGER{
            activated(1),
            deactivated(2)
            }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
            "The actual active status of the patch package.
             activated(1)   : value 1 means the patch package is activated.
             deactivated(2) : value 2 means the patch package is deactivated."
        ::=  {  zxAnSwSavedPatchPackageEntry  7  }

------------------------------------------------------------------------------
-- 14. Saved Patch Package File Information Table
------------------------------------------------------------------------------        
    zxAnSwSavedPatchPackageFileTable   OBJECT-TYPE
        SYNTAX      SEQUENCE  OF  ZxAnSwSavedPatchPackageFileEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "This table includes the information of the file inside the patch
             package."
        ::=  { zxAnCardPatchObjects  6 }

    zxAnSwSavedPatchPackageFileEntry   OBJECT-TYPE
        SYNTAX      ZxAnSwSavedPatchPackageFileEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION 
            "An entry in zxAnSwSavedPatchPackageFileTable."
        INDEX       
            { zxAnSwPatchRack,
              zxAnSwPatchShelf,
              zxAnSwPatchSlot,
              zxAnSwPatchPkgName, 
              zxAnSwPatchPkgFileName }
        ::=  { zxAnSwSavedPatchPackageFileTable 1 }

    ZxAnSwSavedPatchPackageFileEntry  ::=  SEQUENCE {
        zxAnSwPatchPkgFileName                DisplayString,
        zxAnSwPatchPkgFileBuildTime           DateAndTime,
        zxAnSwPatchPkgFileNeedResetCard       INTEGER,
        zxAnSwPatchPkgFileActiveStatus        INTEGER
    }

    zxAnSwPatchPkgFileName     OBJECT-TYPE 
        SYNTAX          DisplayString (SIZE (1..64))
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     
            "The name of the file inside the patch package."
        ::=  {  zxAnSwSavedPatchPackageFileEntry  1  }
        
    zxAnSwPatchPkgFileBuildTime  OBJECT-TYPE 
        SYNTAX          DateAndTime
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION    
            "The build time of the file inside the patch package."
        ::=  {  zxAnSwSavedPatchPackageFileEntry  2  }

    zxAnSwPatchPkgFileNeedResetCard OBJECT-TYPE 
        SYNTAX      INTEGER{
            yes(1),
            no(2)
            }         
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
            "Whether the card needs to be reset.
             yes(1) : value 1 means need to reset the card.
             no(2) :  value 2 means no need to reset the card."
        ::=  {  zxAnSwSavedPatchPackageFileEntry  3  }

    zxAnSwPatchPkgFileActiveStatus OBJECT-TYPE 
        SYNTAX      INTEGER{
            activated(1),
            deactivated(2)
            }
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION     
            "The patch file active status.                     
             activated(1)   : value 1 means the patch file is activated.
             deactivated(2) : value 2 means the patch file is deactivated."
        ::=  {  zxAnSwSavedPatchPackageFileEntry  4  }

-------------------------------------------------------------------------------
-- 21 Software Notification
-------------------------------------------------------------------------------

    zxAnSwAutoUpdateFinished NOTIFICATION-TYPE
        OBJECTS { zxAnSwAutoUpdateStatus,zxAnSwAutoUpdateFailedReason }
        STATUS  current
        DESCRIPTION
            "A zxAnSwAutoUpdateFinished is sent when the agent has detected 
            that the automatic update is finished."
        ::= { zxAnSwAutoUpdateTraps 1 }
    
    zxAnSwAutoUpdateSwDiffer NOTIFICATION-TYPE
        OBJECTS { zxAnSwAutoUpdateCurrChkStartTime, 
                  zxAnSwAutoUpdateChkDifferFiles }
        STATUS  current
        DESCRIPTION
            "A zxAnSwAutoUpdateSwDiffer is sent when the agent has 
            detected different version files between NE and file server."
        ::= { zxAnSwAutoUpdateTraps 2 }
    
    zxAnSwAutoUpdateSwChkFailed NOTIFICATION-TYPE
        OBJECTS { zxAnSwAutoUpdateCurrChkStartTime, 
                  zxAnSwAutoUpdateChkFailedReason }
        STATUS  current
        DESCRIPTION
            "A zxAnSwAutoUpdateSwChkFailed is sent when the agent has 
            detected that version check is failed."
        ::= { zxAnSwAutoUpdateTraps 3 }
        
-------------------------------------------------------------------------------
-- 31. Software Conformance
-------------------------------------------------------------------------------    
    zxAnSwConformance      OBJECT IDENTIFIER   ::=  {  zxAnSoftwareMib     4  }
    
    zxAnSwCompliances      OBJECT IDENTIFIER   ::=  {  zxAnSwConformance   1  }
    zxAnSwGroups           OBJECT IDENTIFIER   ::=  {  zxAnSwConformance   2  }

    zxAnSwCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION 
            "The compliance statement for SNMP entities which implement the
            ZTE-AN-SOFTWARE-MIB."
        MODULE -- this module
        
            MANDATORY-GROUPS { 
                 zxAnSwCardRunVerGroup,
                 zxAnSwSubcardRunVerGroup,
                 zxAnSwImageGroup,
                 zxAnSwManualUpdateGroup,
                 zxAnSwManualUpdateStatusGroup,
                 zxAnSwAutoUpdateChkGroup,
                 zxAnSwAutoUpdateOperGroup,
                 zxAnSwSwapGroup,
                 zxAnSwNotificationsGroup
                }
        ::= { zxAnSwCompliances 1 }
                  
    zxAnSwCardRunVerGroup OBJECT-GROUP
        OBJECTS {
                 zxAnSwCardFileName, zxAnSwCardFileType, zxAnSwCardVersion, 
                 zxAnSwCardFileLen, zxAnSwCardBuildTime, 
                 zxAnSwCardBootwareFileName, zxAnSwCardBootwareFileType, 
                 zxAnSwCardBootwareVersion, zxAnSwCardBootwareFileLen, 
                 zxAnSwCardBootwareBuildTime, zxAnSwCardFirmware1FileName,
                 zxAnSwCardFirmware1FileType, zxAnSwCardFirmware1Version, 
                 zxAnSwCardFirmware1FileLen, zxAnSwCardFirmware1BuildTime,
                 zxAnSwCardFirmware2FileName, zxAnSwCardFirmware2FileType,
                 zxAnSwCardFirmware2Version, zxAnSwCardFirmware2FileLen,
                 zxAnSwCardFirmware2BuildTime, zxAnSwCardFirmware3FileName, 
                 zxAnSwCardFirmware3FileType, zxAnSwCardFirmware3Version,       
                 zxAnSwCardFirmware3FileLen, zxAnSwCardFirmware3BuildTime
                }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to represent chassis 
             version information, include card running version information."

        ::= { zxAnSwGroups 1 }

    zxAnSwSubcardRunVerGroup OBJECT-GROUP
        OBJECTS {zxAnSwSubcardFileName, 
                 zxAnSwSubcardFileType, zxAnSwSubcardVersion, 
                 zxAnSwSubcardFileLen, zxAnSwSubcardBuildTime,
                 zxAnSwSubcardBootwareFileName, zxAnSwSubcardBootwareFileType, 
                 zxAnSwSubcardBootwareVersion, zxAnSwSubcardBootwareFileLen, 
                 zxAnSwSubcardBootwareBuildTime, zxAnSwSubcardFirmwareFileName,
                 zxAnSwSubcardFirmwareFileType, zxAnSwSubcardFirmwareVersion, 
                 zxAnSwSubcardFirmwareFileLen, zxAnSwSubcardFirmwareBuildTime
                }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to represent chassis 
             version information, include subcard running version information."

        ::= { zxAnSwGroups 2 }                            

    zxAnSwImageGroup OBJECT-GROUP
        OBJECTS {zxAnSwImageFileType, zxAnSwImageVersion, zxAnSwImageFileLen,
                 zxAnSwImageBuildTime, zxAnSwImageActiveStatus
                }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to represent chassis 
             version information, include card saved version information."

        ::= { zxAnSwGroups 3 }     

    zxAnSwManualUpdateGroup OBJECT-GROUP
        OBJECTS {zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf, 
                 zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType
                }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to update software by 
            manual."

        ::= { zxAnSwGroups 4 } 
        
    zxAnSwManualUpdateStatusGroup OBJECT-GROUP
        OBJECTS {zxAnSwManualUpdateStatus, zxAnSwManualFailedReason
                }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to represent chassis
             software update status."

        ::= { zxAnSwGroups 5 } 

    zxAnSwAutoUpdateChkGroup OBJECT-GROUP
        OBJECTS { zxAnSwAutoUpdateChkEnable, zxAnSwAutoUpdateChkStartTime, 
                  zxAnSwAutoUpdateChkInterval,
                  zxAnSwAutoUpdateCurrChkStartTime, 
                  zxAnSwAutoUpdateChkDifferFiles, zxAnSwAutoUpdateChkStatus,
                  zxAnSwAutoUpdateChkFailedReason
                }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to management version 
            automatic updating.
            Automatic version check to list the different files name between
            NE and file server."

        ::= { zxAnSwGroups 6 } 
        
    zxAnSwAutoUpdateOperGroup OBJECT-GROUP
        OBJECTS { zxAnSwAutoUpdateAction, zxAnSwAutoUpdateActiveEnable,
                  zxAnSwAutoUpdateSwBackupEnable, zxAnSwAutoUpdateStatus, 
                  zxAnSwAutoUpdateCurrFileName, zxAnSwAutoUpdateCurrFileSize, 
                  zxAnSwAutoUpdateCurrFileProgress, zxAnSwAutoUpdateTotalFiles,
                  zxAnSwAutoUpdateSuccessFiles, zxAnSwAutoUpdateFailedReason
                }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to management version 
            automatic updating.
            Automatic version update to download version from file server and 
            to take effect."

        ::= { zxAnSwGroups 7 } 
        
    zxAnSwSwapGroup OBJECT-GROUP
        OBJECTS { zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot
                }
        STATUS current
        DESCRIPTION 
            "The collection of objects which are used to swap version ."

        ::= { zxAnSwGroups 8 }         
        
    zxAnSwNotificationsGroup OBJECT-GROUP
        OBJECTS {  zxAnSwAutoUpdateFinished, zxAnSwAutoUpdateSwDiffer,
                   zxAnSwAutoUpdateSwChkFailed
                }
        STATUS current
        DESCRIPTION 
            "The notifications which indicate specific changes, 
            include automatic update check,automatic update status."

        ::= { zxAnSwGroups 9 } 
END