path: root/MIBS/zyxel/IES5206-TRAPS-MIB

------------------------------------------------------------
-- $$Version 1.00 (Change history)
-- 1.00 (2013/7/30)
		-- File created
------------------------------------------------------------

IES5206-TRAPS-MIB DEFINITIONS ::= BEGIN

    IMPORTS

	OBJECT-TYPE, IpAddress, Unsigned32, NOTIFICATION-TYPE
		FROM SNMPv2-SMI
	DisplayString, ifIndex
	  	FROM RFC1213-MIB
	ifAdminStatus, ifOperStatus
	  	FROM IF-MIB
	IANAItuProbableCause, IANAItuEventType
		FROM IANA-ITU-ALARM-TC-MIB
	ies5206,
	slotModuleId,
	voltageConfIndex,
	voltageCurValue,
	temperatureConfIndex,
	temperatureCurValue,
	coaConfIssueThreshold,
	coaConfAnalyticMethod,
--	sysCmSyncUrl,
--	sysCmSyncStatus,
--	sysPmSyncUrl,
--	sysPmSyncStatus,
--	sysFwUpgradeUrl,
	sysFwUpgradeStatus,
--	sysFwUpgradeVersion,
--	sysCmSyncRefCounter,
	sysBootupFwVersion,
	transceiverDdmInfoEntryType,
	transceiverDdmInfoEntryAlarmMax,
	transceiverDdmInfoEntryAlarmMin,
	transceiverDdmInfoEntryWarnMax,
	transceiverDdmInfoEntryWarnMin,
	transceiverDdmInfoEntryCurrent,
	transceiverPerOntRxPower
		FROM IES5206-MIB;

	trap			OBJECT IDENTIFIER ::= { ies5206 19 }

----------------------------------------
-- trap
----------------------------------------

	object			OBJECT IDENTIFIER ::= { trap 1 }
	dsltrap			OBJECT IDENTIFIER ::= { trap 2 }
	equipment		OBJECT IDENTIFIER ::= { trap 3 }
	systrap			OBJECT IDENTIFIER ::= { trap 4 }
	getrap			OBJECT IDENTIFIER ::= { trap 5 }
	gbondtrap		OBJECT IDENTIFIER ::= { trap 7 }
	gpontrap		OBJECT IDENTIFIER ::= { trap 8 }

--------------------
-- object
--------------------

	loopguardSenderIfIndex OBJECT-TYPE
    	SYNTAX      INTEGER
    	MAX-ACCESS  not-accessible
   		STATUS      current
    	DESCRIPTION
			"A unique value, greater than zero, for each interface.
	        The index of sender interface which sends detected loop guard probe packet."
    	::= { object 1 }

    sysProblemCause OBJECT-TYPE
        SYNTAX  DisplayString
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"It describes the problem occurred in the system, e.g. maintenance
            operation failures, system reboot, error log, ...etc.
            1: cold start by power cycle, HW_WDG, overheat, maintenance button, ...
            2: operatos reboots the system"
        ::= { object 2 }

	sysMacAntiSpoofOrig OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The Original ifIndex of Mac-AntiSpoofing."
		::= { object 3 }

	sysMacAntiSpoofNew OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The New ifIndex of Mac-AntiSpoofing."
		::= { object 4 }

	sysMacAntiSpoofMAC OBJECT-TYPE
		SYNTAX DisplayString
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The MAC of Mac-AntiSpoofing."
		::= { object 5 }

	sysCoaIssuedLoad OBJECT-TYPE
		SYNTAX      Unsigned32
    	MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
			"CPU analyzed utilization when CPU overload alarm is issued."
		::= { object 6 }

	xdslDevId OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The device ID of DSP device on board."
		::= { object 13 }

	timerefSource OBJECT-TYPE
		SYNTAX INTEGER {
			freerun(0),
			gps(1),
			ieee1588(2),
			synce(3)
		}
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The system receive timing reference signal correctly.
			The varable in the binding list is current reference,
			0: freerun,
			1: GPS module,
			2: IEEE 1588,
			3: SyncE"
		::= { object 18 }

	dhcpServerIpv4Address OBJECT-TYPE
		SYNTAX Unsigned32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"IPv4 address of DHCP server address.
			Note: if an IPv4 address is a.b.c.d then it converts to be (a<<24 + b<<16 + c<<8 + d)"
		::= { object 19 }

	dhcpLeasedIpv4Address OBJECT-TYPE
		SYNTAX Unsigned32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The leased IPv4 address from a DHCP server
			Note: if an IPv4 address is a.b.c.d then it converts to be (a<<24 + b<<16 + c<<8 + d)"
		::= { object 20 }

	dhcpIfIndex OBJECT-TYPE
		SYNTAX Unsigned32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The DHCP client inteface"
		::= { object 21 }

	currBondingIfIndex OBJECT-TYPE
		SYNTAX Unsigned32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The current bonding ifIndex which a DSL port joined.
			Value starts from DSL max port plus 1"
		::= { object 22 }

	lastBondingIfIndex OBJECT-TYPE
		SYNTAX Unsigned32
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"The last bonding ifIndex which a DSL port joined.
			Value starts from DSL max port plus 1"
		::= { object 23 }

    sysRestartEventType OBJECT-TYPE	-- IANAItuEventType
        SYNTAX  IANAItuEventType
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"The variable describes the event that caused system restart."
        ::= { object 24 }

    sysRestartProbableCause OBJECT-TYPE	-- IANAItuProbableCause
        SYNTAX  INTEGER
        MAX-ACCESS  not-accessible
        STATUS  current
        DESCRIPTION
        	"The variable describes the probable cause that caused system restart.
        	Below probable cause shall be implemented accordingly.
        	sysResetCause is '1' (hardware related) and if sysRestartErrorCode is
        		1: power input missing - powerProblem  (58)
        		2: hardware watchdog triggered - processorProblems (535)
        		3: overheat triggered - highTemperature  (123)
        		4: maintenance button pressed > 8 seconds - maunal (1025)
        	sysResetCause is '2' (software related) and if sysRestartCode is
        		1: triggered by software watchdog - softwareProgramError (546)
        		2: restart caused by program exception (additional context stored for reference) - softwareError (163)
        		3: restart caused by software program intentionally - softwareError (163).
        	sysResetCause is '3' (operation related) and if sysRestartErrorCode is
        		1: operator press maintenance button 7 seconds - maintenance (1026)
        		2: operator reset manually (either by SNMP or CLI command) - manual (1025)
        		3: firmware upgrade - sfwrDownloadFailure  (156)"
        ::= { object 25 }

--    sysRestartAdditionalInfo OBJECT-TYPE
--        SYNTAX  DisplayString
--        MAX-ACCESS  not-accessible
--        STATUS  current
--        DESCRIPTION "This a string to indicate what meaning could be for cause and error code."
--        ::= { object 26 }

	slotModuleId OBJECT-TYPE
		SYNTAX INTEGER (0..0)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Slot ID"
		::= { object 27 }

	iesIANAEventType OBJECT-TYPE
		SYNTAX IANAItuEventType
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"An object to indicate that trap belongs to which IANA event type."
		::= { object 28 }

	iesIANAProbableCause OBJECT-TYPE
		SYNTAX IANAItuProbableCause
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"An object to indicate that trap belongs to which IANA problem cause.
			Below probable causes shall be supported:
        		1: power input missing - powerProblem  (58)
        		2: hardware watchdog triggered - processorProblems (535)
        		3: overheat triggered - highTemperature  (123)
        		4: maintenance button pressed > 8 seconds - maunal (1025)
        		5: triggered by software watchdog - softwareProgramError (546)
        		6: restart caused by program exception (additional context stored for reference) - softwareError (163)
        		7: restart caused by software program intentionally - softwareError (163).
        		8: operator press HW reset button - maintenance (1026)
        		9: operator reset manually (either by SNMP or CLI command) - manual (1025)
        		10: firmware upgrade - sfwrDownloadFailure  (156)"
		::= { object 29 }

	sysMoaIssuedLoad OBJECT-TYPE
		SYNTAX      Unsigned32
    	MAX-ACCESS  not-accessible
		STATUS      current
		DESCRIPTION
			"Memory analyzed utilization when memory overload alarm is issued."
		::= { object 30 }

	gponOntId OBJECT-TYPE
		SYNTAX INTEGER (1..128)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"gpon ont ID"
		::= { object 31 }

	gponOntCardId OBJECT-TYPE
		SYNTAX INTEGER (1..16)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"gpon ont card ID"
		::= { object 32 }

	gponOntCardPortId OBJECT-TYPE
		SYNTAX INTEGER (1..128)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"gpon ont card port ID"
		::= { object 33 }

	gponMeClassId OBJECT-TYPE
		SYNTAX INTEGER (1..65535)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"gpon managed entity class value"
		::= { object 34 }

	gponRogueOntDetectStatus OBJECT-TYPE
		SYNTAX INTEGER (1..5)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"Below is the status of rouge ont detection:
			1: start rogue detection
			2: stop rogue detection
			3: detect rogue exist
			4: rogue ont does not exist
			5: discover rogue ont"
		::= { object 35 }

	gponOntSerialNumber OBJECT-TYPE
		SYNTAX DisplayString
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The serial number of ont"
		::= { object 36 }

	gponOntPassword OBJECT-TYPE
		SYNTAX DisplayString
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The password of ont"
		::= { object 37 }

	gponUserName OBJECT-TYPE
		SYNTAX DisplayString
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"User name"
		::= { object 38 }

	gponMacSubSlotId OBJECT-TYPE
		SYNTAX INTEGER (1..4)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"gpon MAC subslot ID"
		::= { object 39 }

	mstpInstanceId OBJECT-TYPE
		SYNTAX INTEGER (0..16)
		MAX-ACCESS read-only
		STATUS current
		DESCRIPTION
			"mstp instance number"
		::= { object 40 }

	gponOntMacAntiSpoofOrig OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The original gpon ont ID of Mac-AntiSpoofing."
		::= { object 41 }

	gponOntMacAntiSpoofNew OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The new gpon ont ID of Mac-AntiSpoofing."
		::= { object 42 }

	gponOntMacAntiSpoofMAC OBJECT-TYPE
		SYNTAX INTEGER
		MAX-ACCESS not-accessible
		STATUS current
		DESCRIPTION
			"The gpon ont MAC of Mac-AntiSpoofing."
		::= { object 43 }

--------------------
-- dsltrap
--------------------
	xdslLinkDown	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifAdminStatus, ifOperStatus }
				STATUS  current
				DESCRIPTION	"The trap signifies one dsl port is linked down."
				::= { dsltrap 1 }

	xdslLinkUp NOTIFICATION-TYPE
	    		OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifAdminStatus, ifOperStatus }
	    		STATUS  current
	    		DESCRIPTION	"The trap signifies one dsl port is linked up."
	    		::= { dsltrap 2 }

	xdslXtucLof	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-C Loss of Framing."
				::= { dsltrap 3 }

	xdslXtucLos	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-C Loss of Signal."
				::= { dsltrap 4 }

	xdslXturLof	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-R Loss of Framing."
				::= { dsltrap 5 }

	xdslXturLos	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-R Loss of Signal."
				::= { dsltrap 6 }

	xdslXturLpr	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-R Loss of Power."
				::= { dsltrap 7 }

	xdslXtucLofClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-C Loss of Framing is cleared."
				::= { dsltrap 8 }

	xdslXtucLosClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-C Loss of Signal is cleared."
				::= { dsltrap 9 }

	xdslXturLofClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-R Loss of Framing is cleared."
				::= { dsltrap 10 }

	xdslXturLosClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-R Loss of Signal is cleared."
				::= { dsltrap 11 }

	xdslXturLprClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies XTU-R Loss of Power is cleared."
				::= { dsltrap 12 }

	xdslDspDownloadFail	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, xdslDevId
				}
				STATUS  current
				DESCRIPTION	"The trap signifies DSL modem code download failed."
				::= { dsltrap 15 }

	xdslDspDownloadFailClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, xdslDevId
				}
				STATUS  current
				DESCRIPTION	"The trap signifies DSL modem code download fail is cleared."
				::= { dsltrap 16 }

	xdslDspInoperable	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, xdslDevId
				}
				STATUS  current
				DESCRIPTION	"The trap signifies a DSL chip failure due to
				             modem code download faied for 10 times."
				::= { dsltrap 17 }


--------------------
-- equipment
--------------------

	hwMonitorFail 	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId }
				STATUS current
				DESCRIPTION
					"Hardware monitor itself diagnosis is failed."
				::= { equipment 1 }

	voltageOutOfRange	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, voltageConfIndex, voltageCurValue }
				STATUS  current
				DESCRIPTION	"Send a message to notify the manager that the voltage of the system is out of range.
				             The variable in the binding list is the current voltage in volt of the system."
				::= { equipment 2 }

	voltageNormal	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, voltageConfIndex, voltageCurValue }
				STATUS  current
				DESCRIPTION	"Send a message to notify the manager that the low-voltage condition is over.
				             The variable in the binding list is the current voltage in volt
				             of the system."
				::= { equipment 3 }

	temperatureOutOfRange		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, temperatureConfIndex, temperatureCurValue }
				STATUS  current
				DESCRIPTION	"Send a message to notify the manager that the temperature of the system is out of range.
				             The variable in the binding list is the current temperature in Celsius
				             of the system."
				::= { equipment 4 }

	temperatureNormal	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, temperatureConfIndex, temperatureCurValue }
				STATUS  current
				DESCRIPTION	"Send a message to notify the manager that temperature is back to normal (temperature_out_of_range condition disappeared).
				             The variable in the binding list is the current temperature in Celsius
				             of the system."
				::= { equipment 5 }

	fanRpmOutOfRange		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, fanConfIndex, fanRpmCurValue }
				STATUS  current
				DESCRIPTION	"Send a message to notify the manager that the rpm of the fan is out of range.
				             The variable in the binding list is the current rpm of the fan."
				::= { equipment 6 }

	fanRpmNormal		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, fanConfIndex, fanRpmCurValue }
				STATUS  current
				DESCRIPTION	"Send a message to notify the manager that the out-of-range condition of the fan is over.
				             The variable in the binding list is the current rpm of the fan."
				::= { equipment 7 }

	hwRtcFail		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"Send a message to notify the manager that the hardware RTC is failed."
				::= { equipment 8 }

	extAlarmInput1Trigger	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 1 of MSC card
				             is triggered."
				::= { equipment 9 }

	extAlarmInput1Release	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 1 of MSC card
				             is released."
				::= { equipment 10 }

	extAlarmInput2Trigger	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 2 of MSC card
				             is triggered."
				::= { equipment 11 }

	extAlarmInput2Release	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 2 of MSC card
				             is released."
				::= { equipment 12 }

	extAlarmInput3Trigger	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 3 of MSC card
				             is triggered."
				::= { equipment 13 }

	extAlarmInput3Release	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 3 of MSC card
				             is released."
				::= { equipment 14 }

	extAlarmInput4Trigger	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 4 of MSC card
				             is triggered."
				::= { equipment 15 }

	extAlarmInput4Release	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 4 of MSC card
				             is released."
				::= { equipment 16 }

	extAlarmInput5Trigger	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 5 of MSC card
				             is triggered."
				::= { equipment 17 }

	extAlarmInput5Release	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 5 of MSC card
				             is released."
				::= { equipment 18 }

	extAlarmInput6Trigger	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 6 of MSC card
				             is triggered."
				::= { equipment 19 }

	extAlarmInput6Release	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 6 of MSC card
				             is released."
				::= { equipment 20 }

	extAlarmInput7Trigger	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 7 of MSC card
				             is triggered."
				::= { equipment 21 }

	extAlarmInput7Release	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 7 of MSC card
				             is released."
				::= { equipment 22 }

	extAlarmInput8Trigger	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 8 of MSC card
				             is triggered."
				::= { equipment 23 }

	extAlarmInput8Release	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, externalAlarmName }
				STATUS  current
				DESCRIPTION	"The trap signifies that the external alarm input 8 of MSC card
				             is released."
				::= { equipment 24 }

	power1NotExist		NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"The trap signifies power 1 not detected."
				::= { equipment 29 }

	power1NotExistClear	NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"The trap signifies power 1 detected."
				::= { equipment 30 }

	power2NotExist		NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"The trap signifies power 2 not detected."
				::= { equipment 31 }

	power2NotExistClear	NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"The trap signifies power 2 detected."
				::= { equipment 32 }

	power1VoltageFail		NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 1 voltage fail."
				::= { equipment 33 }

	power1VoltageFailClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 1 voltage is cleared."
				::= { equipment 34 }

	power2VoltageFail		NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 2 voltage fail."
				::= { equipment 35 }

	power2VoltageFailClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 2 voltage is cleared."
				::= { equipment 36 }

	modulePlugIn		NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"A modulePlugIn trap signifies that the sending
				             protocol entity recognizes that one module is
				             plugged into the device."
				::= { equipment 37 }

	modulePullOut		NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"A modulePullOut trap signifies that the sending
				             protocol entity recognizes one module is pulled out
				             from the device."
				::= { equipment 38 }

	moduleUp		NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"A moduleUp trap signifies that the sending
			                	protocol entity recognizes that one of the
			                	modules represented in the agent's
			                	configuration has come up."
				::= { equipment 39 }

	moduleDown		NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"A moduleDown trap signifies that the sending
			                	protocol entity recognizes a failure in one of
			                	the modules represented in the agent's
			                	configuration."
				::= { equipment 40 }

	moduleDisable		NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"The trap signifies user disables one module."
				::= { equipment 41 }

-- use reboot&sysRestart alarm
--	moduleReset		NOTIFICATION-TYPE
--				OBJECTS { slotModuleId }
--				STATUS  current
--				DESCRIPTION	"The trap signifies one module is reset."
--				::= { equipment 42 }

	moduleInvalid	NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"The trap signifies invalid modlue detected."
				::= { equipment 43 }

	moduleInvalidClear	NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"The trap signifies invalid modlue is cleared."
				::= { equipment 44 }


	timerefSync	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, timerefSource }
				STATUS  current
				DESCRIPTION	"The system receive timing reference signal correctly.
							The varable in the binding list is current reference."
				::= { equipment 45 }

	timerefNoSync	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, timerefSource }
				STATUS  current
				DESCRIPTION	"The system receive timing reference signal incorrectly.
							The varable in the binding list is last reference."
				::= { equipment 46 }

	timerefPresent	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"The system received timing reference signal."
				::= { equipment 47 }

	timerefNoPresent	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"The system does not receive timing reference signal."
				::= { equipment 48 }

	timerefToDSync	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"The system receives ToD sentence correctly."
				::= { equipment 49 }

	timerefToDNoSync	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"The system does not receive ToD sentence correctly."
				::= { equipment 50 }

	timerefChipFail	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"The system can not access clock synchronize chip correctly."
				::= { equipment 51 }

	moduleWrongFwVer	NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"rddn-msc wrong fwVersion,skip provision"
				::= { equipment 52 }

	moduleSwitchOver	NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION	"rddn-msc switch over"
				::= { equipment 53 }

	equipmentCpuOverload	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysCoaIssuedLoad, coaConfIssueThreshold, coaConfAnalyticMethod }
				STATUS  current
				DESCRIPTION	"Signifies equipment cpu is overload."
				::= { equipment 54 }

	equipmentCpuOverloadClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysCoaIssuedLoad, coaConfClearThreshold, coaConfAnalyticMethod }
				STATUS  current
				DESCRIPTION	"Signifies equipment cpu overload is cleared."
				::= { equipment 55 }

	acDown	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies AC power is down."
				::= { equipment 56 }

	acDownClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies AC down alarm is cleared."
				::= { equipment 57 }

	battTempOutOfRange	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery temperature is out of range."
				::= { equipment 58 }

	battTempOutOfRangeClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery temperature out of range alarm is cleared."
				::= { equipment 59 }

	battVoltageLow	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery voltage is under the threshold."
				::= { equipment 60 }

	battVoltageLowClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery voltage low alarm is cleared."
				::= { equipment 61 }

	battVoltageCritic	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery voltage is under the threshold."
				::= { equipment 62 }

	battVoltageCriticClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery voltage critical alarm is cleared."
				::= { equipment 63 }

	battVoltageError	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies the battery voltage is too low to be charged."
				::= { equipment 64 }

	battVoltageErrorClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery voltage error alarm is cleared."
				::= { equipment 65 }

	battAbsent	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies no battery is detected."
				::= { equipment 66 }

	battAbsentClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery absent alarm is cleared."
				::= { equipment 67}

	currentFault	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies charge current exceed the threshold."
				::= { equipment 68 }

	currentFaultClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies charge current fault alarm is cleared."
				::= { equipment 69 }

	chargeOvertime	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies charge overtime."
				::= { equipment 70 }

	chargeOvertimeClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies charge overtime is cleared."
				::= { equipment 71 }

	battInfoInvalid	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery capacity invalid."
				::= { equipment 72 }

	battInfoInvalidClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies battery capacity invalid is cleared."
				::= { equipment 73 }

	noThermal	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies no thermal sensor connected."
				::= { equipment 74 }

	noThermalClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies no thermal sensor connected is cleared."
				::= { equipment 75 }

	power1Overheat	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 1 overheat."
				::= { equipment 76 }

	power1OverheatClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 1 overheat is cleared."
				::= { equipment 77 }

	power2Overheat	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 2 overheat."
				::= { equipment 78 }

	power2OverheatClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 2 overheat is cleared."
				::= { equipment 79 }

	power1LmSensorFault	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 1 LM5064 senseor fault."
				::= { equipment 80 }

	power1LmSensorFaultClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 1 LM5064 senseor fault is cleared."
				::= { equipment 81 }

	power2LmSensorFault	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 2 LM5064 senseor fault."
				::= { equipment 82 }

	power2LmSensorFaultClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies power 2 LM5064 senseor fault is cleared."
				::= { equipment 83 }
	dcDown	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies DC power is down."
				::= { equipment 84 }

	dcDownClear	NOTIFICATION-TYPE
				STATUS  current
				DESCRIPTION	"The trap signifies DC down alarm is cleared."
				::= { equipment 85 }

--------------------
-- systrap
--------------------

	sysMacAntiSpoofing NOTIFICATION-TYPE
				OBJECTS {
				    iesIANAEventType,
				    iesIANAProbableCause,
					sysMacAntiSpoofOrig,
					sysMacAntiSpoofNew,
					sysMacAntiSpoofMAC
				}
				STATUS current
				DESCRIPTION
					"MAC anti-spoofing happened."
				::= { systrap 1 }

	sysAlarmClearEnable NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS current
				DESCRIPTION
					"Alarm clear is activated."
				::= { systrap 2 }

	sysLoginFailure NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS current
				DESCRIPTION
					"User login is failed."
				::= { systrap 3 }

	reboot		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"Send a message to the manager that the system is going to shutdown.
				             The variable is the reason that causes the system to shutdown.
				             Note: this notification should be sent before rebooting."
				::= { systrap 4 }

	cpuOverload		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysCoaIssuedLoad, coaConfIssueThreshold, coaConfAnalyticMethod }
				STATUS  current
				DESCRIPTION	"Signifies cpu is overload."
				::= { systrap 5 }

	cpuOverloadClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysCoaIssuedLoad, coaConfClearThreshold, coaConfAnalyticMethod }
				STATUS  current
				DESCRIPTION	"Signifies cpu overload is cleared."
				::= { systrap 6 }

	cfgUploadFail		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"Signifies configuration file uploading to EMS failed."
				::= { systrap 7 }

	cfgReloadFail		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"Signifies configuration file reload from FLASH failed."
				::= { systrap 8 }

	writeFlashFail		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"Signifies writing to flash failed."
				::= { systrap 9 }

	mfgDataFail		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"Signifies invalid manufacturing data."
				::= { systrap 10 }

--	cmUpDownloadNotification		NOTIFICATION-TYPE
--				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysCmSyncUrl, sysCmSyncStatus }
--				STATUS  current
--				DESCRIPTION
--				"Signifies configuration file uploading/downloading and applying status."
--				::= { systrap 16 }

--	pmUploadNotification		NOTIFICATION-TYPE
--				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysPmSyncUrl, sysPmSyncStatus }
--				STATUS  current
--				DESCRIPTION	"Signifies PM file uploading status."
--				::= { systrap 17 }

	swDownloadNotification		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysFwUpgradeStatus }
				STATUS  current
				DESCRIPTION	"Signifies SW image downloading/installing/restoring/reverting status."
				::= { systrap 18 }

	cfgChangeNotification		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS  current
				DESCRIPTION	"Signifies configuration change from CLI command."
				::= { systrap 19 }

	dhcpLeasedNotification		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, dhcpIfIndex, dhcpServerIpv4Address, dhcpLeasedIpv4Address }
				STATUS  current
				DESCRIPTION	"To indicate the system complete DHCP lease process.
							The variable bindings are:
							1) 1: inband management interface; 2: reserved management interface(unused).
							2) the IP address of DHCP server.
							3) the IP address leased from DHCP server."
				::= { systrap 20 }

	sysRestartNotification		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysBootupFwVersion}
				STATUS  current
				DESCRIPTION	"This is a trap to unify system restart trap definition.
							The standard ones ('warm start' and 'cold start') are no longer supported.
							1) sysBootupFwVersion: the system happened restart with booting up firmware version.
							2) sysRestartCause: what reason caused system restart.
							3) sysRestartErrorCode: if this is a restart caused by software problem then error code is specified.
							   '0': is specified is not related to software."
				::= { systrap 21 }

	dhcpLeasedFailNotification		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, dhcpIfIndex}
				STATUS  current
				DESCRIPTION	"To indicate the system failed to complete DHCP lease process on management interface.
							The variable bindings are:
							1) 1: inband management interface; 2: reserved management interface(unused)."
				::= { systrap 22 }

	dhcpLeasedFailNotificationClear		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, dhcpIfIndex}
				STATUS  current
				DESCRIPTION	"Clear dhcpLeasedFailNotification.
							The variable bindings are:
							1) 1: inband management interface; 2: reserved management interface(unused)."
				::= { systrap 23 }

	loopguard		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, loopguardSenderIfIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies loop is detected by ifIndex.
				             The detected loop is between ifIndex and loopguardSenderIfIndex."
				::= { systrap 24 }

	loopguardClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies loop in ifIndex is cleared."
				::= { systrap 25 }

	htPortPolicer	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
				STATUS  current
				DESCRIPTION	"The trap signifies host termination attack is detected in ifIndex."
				::= { systrap 26 }

	sysAlarmCutoffEnable NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS current
				DESCRIPTION
					"Alarm cutoff is activated."
				::= { systrap 27 }

	memoryOverload		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysCoaIssuedLoad, coaConfIssueThreshold, coaConfAnalyticMethod }
				STATUS  current
				DESCRIPTION	"Signifies memory is overload."
				::= { systrap 28 }

	memoryOverloadClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, sysCoaIssuedLoad, coaConfIssueThreshold, coaConfAnalyticMethod }
				STATUS  current
				DESCRIPTION	"Signifies memory overload is cleared."
				::= { systrap 29 }

	macTableFull		NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId }
				STATUS  current
				DESCRIPTION	"Signifies MAC forwarding table full."
				::= { systrap 30 }

	macTableFullClear	NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId }
				STATUS  current
				DESCRIPTION	"Signifies MAC forwarding table full is cleared."
				::= { systrap 31 }

	mstpNewRoot         NOTIFICATION-TYPE
         	    OBJECTS { mstpInstanceId }
             	STATUS  current
             	DESCRIPTION "The newRoot trap indicates that the sending agent has become the new root of the Spanning Tree;
             	the trap is sent by a bridge soon after its election as the new root, e.g., upon expiration of the
             	Topology Change Timer, immediately subsequent to its election.  Implementation of this trap is optional."
             	::= { systrap 32 }

    mstpTopologyChange NOTIFICATION-TYPE
               	OBJECTS { mstpInstanceId }
             	STATUS  current
             	DESCRIPTION "A topologyChange is sent if the topology changed of MSTP has detected."
         	    ::= { systrap 33 }

	fwChange NOTIFICATION-TYPE
				OBJECTS { slotModuleId }
				STATUS  current
				DESCRIPTION "A fw_change is sent if the firmware changed of system has detected."
				::= { systrap 34 }

	reloadCfg NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType }
				STATUS  current
				DESCRIPTION "Signifies configuration reload from CLI command."
				::= { systrap 35 }

	sysLoginSuccess NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause }
				STATUS current
				DESCRIPTION
					"User login is OK."
				::= { systrap 36 }

	protectSwitchSuccess NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifIndex }
				STATUS current
				DESCRIPTION
					"Protect switch success."
				::= { systrap 37 }

	protectSwitchFailed NOTIFICATION-TYPE
				OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifIndex }
				STATUS current
				DESCRIPTION
					"Protect switch failed."
				::= { systrap 38 }

--------------------
-- getrap
--------------------

	geLinkDown NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifAdminStatus, ifOperStatus }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies one ethernet port is linked down."
	    ::= { getrap 1 }

	geLinkUp NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifAdminStatus, ifOperStatus }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies one ethernet port is linked up."
	    ::= { getrap 2 }

--	geSfpWhitelist NOTIFICATION-TYPE
--	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
--	    STATUS  current
--	    DESCRIPTION
--	            "The trap signifies SFP module is not in listed whitelist."
--	    ::= { getrap 3 }

	geSfpCurrentTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over current threshold."
	    ::= { getrap 4 }

	geSfpVoltageTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over voltage threshold."
	    ::= { getrap 5 }

	geSfpTemperatureTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over temperature threshold."
	    ::= { getrap 6 }

	geSfpTxPowerTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over TX power threshold."
	    ::= { getrap 7 }

	geSfpRxPowerTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over RX power threshold."
	    ::= { getrap 8 }

	geSfpCurrentTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over current threshold cleared."
	    ::= { getrap 9 }

	geSfpVoltageTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over voltage threshold cleared."
	    ::= { getrap 10 }

	geSfpTemperatureTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over temperature threshold cleared."
	    ::= { getrap 11 }

	geSfpTxPowerTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over TX power threshold cleared."
	    ::= { getrap 12 }

	geSfpRxPowerTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies SFP module is over RX power threshold cleared."
	    ::= { getrap 13 }

--------------------
-- gbondtrap
--------------------

	gbondLinkDown NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifAdminStatus }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies one gbond interface port link down.
	    	The 'ifIndex' is bonding interface index."
	    ::= { gbondtrap 1 }

	gbondLinkUp NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifAdminStatus }
	    STATUS  current
	    DESCRIPTION
	        "The trap signifies one gbond interface port linked up.
	        The 'ifIndex' is bonding interface index."
	    ::= { gbondtrap 2 }

--	gbondGroupChange NOTIFICATION-TYPE
--	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifIndex, ifIndex }
--	    STATUS  current
--		DESCRIPTION
--			"The trap signifies bonding group membership is changed,
--			DSL line moves from one bonding group to another one.
--			The 1st 'ifIndex' (current gbond IfIndex) indicates current bonding interface ;
--			The 2nd 'ifIndex' indicates the DSL port happens to change gbond group membership ;
--			The 3rd 'ifIndex' (last gbond IfIndex) indicates last gbond interface, '0' is assigned if previous is none."
--	    ::= { gbondtrap 3 }

--------------------
-- gpontrap
--------------------

	gponOntLos NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of signal."
	    ::= { gpontrap 1 }

	gponOntLosClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of signal cleared."
	    ::= { gpontrap 2 }

	gponOntLof NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of frame."
	    ::= { gpontrap 3 }

	gponOntLofClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of frame cleared."
	    ::= { gpontrap 4 }

	gponOntPloam NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of PLOAM."
	    ::= { gpontrap 5 }

	gponOntPloamClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of PLOAM cleared."
	    ::= { gpontrap 6 }

	gponOntLcdg NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of GEM channel delineation."
	    ::= { gpontrap 7 }

	gponOntLcdgClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of GEM channel delineation cleared."
	    ::= { gpontrap 8 }

	gponOntRdi NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is remote defect indication."
	    ::= { gpontrap 9 }

	gponOntRdiClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is remote defect indication cleared."
	    ::= { gpontrap 10 }

	gponOntSuf NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is startup failure."
	    ::= { gpontrap 11 }

	gponOntSufClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is startup failure cleared."
	    ::= { gpontrap 12 }

	gponOntLoa NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of acknowledge."
	    ::= { gpontrap 13 }

	gponOntLoaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of acknowledge cleared."
	    ::= { gpontrap 14 }

	gponOntDg NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont receives dying-gasp."
	    ::= { gpontrap 15 }

	gponOntDgClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont receives dying-gasp cleared."
	    ::= { gpontrap 16 }

	gponOntDf NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont deactivates failure."
	    ::= { gpontrap 17 }

	gponOntDfClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont deactivates failure cleared."
	    ::= { gpontrap 18 }

	gponOntDow NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is drift of window."
	    ::= { gpontrap 19 }

	gponOntDowClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is drift of window cleared."
	    ::= { gpontrap 20 }

	gponOntTiw NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is transmission interference warning."
	    ::= { gpontrap 21 }

	gponOntTiwClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is transmission interference warning cleared."
	    ::= { gpontrap 22 }

	gponOntSf NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is signal fail."
	    ::= { gpontrap 23 }

	gponOntSfClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is signal fail cleared."
	    ::= { gpontrap 24 }

	gponOntSd NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is signal degraded."
	    ::= { gpontrap 25 }

	gponOntSdClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is signal degraded cleared."
	    ::= { gpontrap 26 }

	gponOntLok NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of key synch."
	    ::= { gpontrap 27 }

	gponOntLokClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is loss of key synch cleared."
	    ::= { gpontrap 28 }

	gponOntFecCorrByte NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is FEC corrected byte."
	    ::= { gpontrap 29 }

	gponOntFecCorrByteClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is FEC corrected byte cleared."
	    ::= { gpontrap 30 }

	gponOntFecCorrCw NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is FEC corrected code word."
	    ::= { gpontrap 31 }

	gponOntFecCorrCwClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is FEC corrected code word cleared."
	    ::= { gpontrap 32 }

	gponOntFecUnCorrCw NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is FEC uncorrected code word."
	    ::= { gpontrap 33 }

	gponOntFecUnCorrCwClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is FEC uncorrected code word cleared."
	    ::= { gpontrap 34 }

	gponOntTcaBip NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is bit interleaved parity."
	    ::= { gpontrap 35 }

	gponOntTcaBipClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is bit interleaved parity cleared."
	    ::= { gpontrap 36 }

	gponOntTcaRei NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is remote error indication."
	    ::= { gpontrap 37 }

	gponOntTcaReiClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is remote error indication cleared."
	    ::= { gpontrap 38 }

	omciBatteryFailure NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Battery is provisioned and present but cannot recharge."
	    ::= { gpontrap 67 }

	omciBatteryFailureClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Battery is provisioned and present but cannot recharge cleared."
	    ::= { gpontrap 68 }

	omciBatteryLow NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Battery is provisioned and present but its voltage is too low."
	    ::= { gpontrap 69 }

	omciBatteryLowClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Battery is provisioned and present but its voltage is too low cleared."
	    ::= { gpontrap 70 }

	omciBatteryMissing NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Battery is provisioned but missing."
	    ::= { gpontrap 71 }

	omciBatteryMissingClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Battery is provisioned but missing cleared."
	    ::= { gpontrap 72 }

	omciBlockLoss NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Content loss in excess of threshold."
	    ::= { gpontrap 73 }

	omciBlockLossClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Content loss in excess of threshold cleared."
	    ::= { gpontrap 74 }

	omciCardAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Card in alarm."
	    ::= { gpontrap 75 }

	omciCardAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Card in alarm cleared."
	    ::= { gpontrap 76 }

	omciConFuncFail NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Indicates a failure of the connecting function."
	    ::= { gpontrap 87 }

	omciConFuncFailClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Indicates a failure of the connecting function cleared."
	    ::= { gpontrap 88 }

	omciDataRateThrDownShift NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Data rate threshold downshift."
	    ::= { gpontrap 89 }

	omciDataRateThrDownShiftClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Data rate threshold downshift cleared."
	    ::= { gpontrap 90 }

	omciDataRateThrUpShift NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Data rate threshold upshift."
	    ::= { gpontrap 91 }

	omciDataRateThrUpShiftClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Data rate threshold upshift cleared."
	    ::= { gpontrap 92 }

	omciDeprecated NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"GEM interworking termination point."
	    ::= { gpontrap 93 }

	omciDeprecatedClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"GEM interworking termination point cleared."
	    ::= { gpontrap 94 }

	omciDyingGasp NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU is powering off imminently."
	    ::= { gpontrap 97 }

	omciDyingGaspClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU is powering off imminently cleared."
	    ::= { gpontrap 98 }

	omciEndToEndLossOfContinuity NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Loss of continuity can be detected when the GEM port network CTP supports a GEM interworking termination point."
	    ::= { gpontrap 99 }

	omciEndToEndLossOfContinuityClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Loss of continuity can be detected when the GEM port network CTP supports a GEM interworking termination point cleared."
	    ::= { gpontrap 100 }

	omciEqptAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"A failure on an internal interface or failed self-test."
	    ::= { gpontrap 101 }

	omciEqptAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"A failure on an internal interface or failed self-test cleared."
	    ::= { gpontrap 102 }

	omciFeLossOfFraming NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Far-end loss of frame."
	    ::= { gpontrap 103 }

	omciFeLossOfFramingClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Far-end loss of frame cleared."
	    ::= { gpontrap 104 }

	omciFeLossOfLink NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Far-end loss of link."
	    ::= { gpontrap 105 }

	omciFeLossOfLinkClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Far-end loss of link cleared."
	    ::= { gpontrap 106 }

	omciFeLossOfPower NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Far-end loss of power."
	    ::= { gpontrap 107 }

	omciFeLossOfPowerClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Far-end loss of power cleared."
	    ::= { gpontrap 108 }

	omciFeLossOfSignal NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Far-end loss of signal."
	    ::= { gpontrap 109 }

	omciFeLossOfSignalClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Far-end loss of signal cleared."
	    ::= { gpontrap 110 }

	omciGfsa NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"GEM frame starvation alarm."
	    ::= { gpontrap 113 }

	omciGfsaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"GEM frame starvation alarm cleared."
	    ::= { gpontrap 114 }

	omciHighRxOpticalPower NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Received downstream optical power above threshold."
	    ::= { gpontrap 115 }

	omciHighRxOpticalPowerClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Received downstream optical power above threshold cleared."
	    ::= { gpontrap 116 }

	omciHighTxOpticalPower NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Transmit optical power above upper threshold."
	    ::= { gpontrap 117 }

	omciHighTxOpticalPowerClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Transmit optical power above upper threshold cleared."
	    ::= { gpontrap 118 }

	omciImproperCardRemoval NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Card has been removed without being deprovisioned."
	    ::= { gpontrap 119 }

	omciImproperCardRemovalClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Card has been removed without being deprovisioned cleared."
	    ::= { gpontrap 120 }

	omciLanLos NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No carrier at the Ethernet UNI."
	    ::= { gpontrap 123 }

	omciLanLosClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No carrier at the Ethernet UNI cleared."
	    ::= { gpontrap 124 }

	omciLaserBiasCur NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Laser bias current above threshold determined by vendor; laser end of life pending."
	    ::= { gpontrap 125 }

	omciLaserBiasCurClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Laser bias current above threshold determined by vendor; laser end of life pending cleared."
	    ::= { gpontrap 126 }

	omciLaserEndOfLife NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Failure of transmit laser imminent."
	    ::= { gpontrap 127 }

	omciLaserEndOfLifeClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Failure of transmit laser imminent cleared."
	    ::= { gpontrap 128 }

	omciLineConfigFailure NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Line configuration failure."
	    ::= { gpontrap 129 }

	omciLineConfigFailureClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Line configuration failure cleared."
	    ::= { gpontrap 130 }

	omciLineInitializationFailure NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Line initialization failure."
	    ::= { gpontrap 131 }

	omciLineInitializationFailureClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Line initialization failure cleared."
	    ::= { gpontrap 132 }

	omciLowLaserBiasCur NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the laser bias current is less than the configured threshold."
	    ::= { gpontrap 139 }

	omciLowLaserBiasCurClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the laser bias current is less than the configured threshold cleared."
	    ::= { gpontrap 140 }

	omciLowPowerFeedVoltage NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the power feed voltage is less than the configured threshold."
	    ::= { gpontrap 141 }

	omciLowPowerFeedVoltageClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the power feed voltage is less than the configured threshold cleared."
	    ::= { gpontrap 142 }

	omciLowRxOpticalPower NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Received downstream optical power below threshold."
	    ::= { gpontrap 143 }

	omciLowRxOpticalPowerClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Received downstream optical power below threshold cleared."
	    ::= { gpontrap 144 }

	omciLowTemperature NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the temperature is under the configured threshold."
	    ::= { gpontrap 145 }

	omciLowTemperatureClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the temperature is under the configured threshold cleared."
	    ::= { gpontrap 146 }

	omciLowTxOpticalPower NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Transmit optical power below lower threshold."
	    ::= { gpontrap 147 }

	omciLowTxOpticalPowerClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Transmit optical power below lower threshold cleared."
	    ::= { gpontrap 148 }

	omciNeLossOfFraming NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Near-end loss of frame."
	    ::= { gpontrap 149 }

	omciNeLossOfFramingClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Near-end loss of frame cleared."
	    ::= { gpontrap 150 }

	omciNeLossOfLink NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Near-end loss of link."
	    ::= { gpontrap 151 }

	omciNeLossOfLinkClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Near-end loss of link cleared."
	    ::= { gpontrap 152 }

	omciNeLossOfPower NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Near-end loss of power."
	    ::= { gpontrap 153 }

	omciNeLossOfPowerClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Near-end loss of power cleared."
	    ::= { gpontrap 154 }

	omciNeLossOfSignal NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Near-end loss of signal."
	    ::= { gpontrap 155 }

	omciNeLossOfSignalClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Near-end loss of signal cleared."
	    ::= { gpontrap 156 }

	omciOntGTemperatureRed NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Some services have been shut down to avoid equipment damage."
	    ::= { gpontrap 157 }

	omciOntGTemperatureRedClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Some services have been shut down to avoid equipment damage cleared."
	    ::= { gpontrap 158 }

	omciOntGTemperatureYellow NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No service shutdown at present, but the circuit pack is operating beyond its recommended range."
	    ::= { gpontrap 159 }

	omciOntGTemperatureYellowClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No service shutdown at present, but the circuit pack is operating beyond its recommended range cleared."
	    ::= { gpontrap 160 }

	omciOntSelfTestFailure NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has failed autonomous self-test."
	    ::= { gpontrap 161 }

	omciOntSelfTestFailureClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has failed autonomous self-test cleared."
	    ::= { gpontrap 162 }

	omciOnuManualPowerOff NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The ONU is shutting down because the subscriber has turned off its power switch."
	    ::= { gpontrap 163 }

	omciOnuManualPowerOffClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The ONU is shutting down because the subscriber has turned off its power switch cleared."
	    ::= { gpontrap 164 }

	omciPhysicalIntrusionAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Applies if the ONU supports detection such as door or box open ."
	    ::= { gpontrap 167 }

	omciPhysicalIntrusionAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Applies if the ONU supports detection such as door or box open  cleared."
	    ::= { gpontrap 168 }

	omciPlugInEqptIdMismatchAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Applies if the ONU supports detection such as door or box open ."
	    ::= { gpontrap 169 }

	omciPlugInEqptIdMismatchAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Applies if the ONU supports detection such as door or box open cleared."
	    ::= { gpontrap 170 }

	omciPlugInLimMissingAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Configured Plug-in LIM is not present."
	    ::= { gpontrap 171 }

	omciPlugInLimMissingAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Configured Plug-in LIM is not present cleared."
	    ::= { gpontrap 172 }

	omciPlugInTypeMismatchAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Inserted Plug-in LIM is wrong type."
	    ::= { gpontrap 173 }

	omciPlugInTypeMismatchAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Inserted Plug-in LIM is wrong type cleared."
	    ::= { gpontrap 174 }

	omciPoweringAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Fuse failure or failure of DC/DC converter."
	    ::= { gpontrap 175 }

	omciPoweringAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Fuse failure or failure of DC/DC converter cleared."
	    ::= { gpontrap 176 }

	omciProtectionSwitch NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"An autonomous equipment protection switch has occurred."
	    ::= { gpontrap 177 }

	omciProtectionSwitchClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"An autonomous equipment protection switch has occurred cleared."
	    ::= { gpontrap 178 }

	omciSd NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Bit error-based signal degrade."
	    ::= { gpontrap 185 }

	omciSdClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Bit error-based signal degrade cleared."
	    ::= { gpontrap 186 }

	omciSelfTestFailure NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Failure of circuit pack autonomous self-test."
	    ::= { gpontrap 187 }

	omciSelfTestFailureClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Failure of circuit pack autonomous self-test cleared."
	    ::= { gpontrap 188 }

	omciSf NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Bit error-based signal fail."
	    ::= { gpontrap 189 }

	omciSfClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Bit error-based signal fail cleared."
	    ::= { gpontrap 190 }

	omciSipUdRegAuth NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Cannot authenticate a registration session."
	    ::= { gpontrap 205 }

	omciSipUdRegAuthClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Cannot authenticate a registration session cleared."
	    ::= { gpontrap 206 }

	omciSipUdRegFail NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Failure response received from a registration server."
	    ::= { gpontrap 207 }

	omciSipUdRegFailClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Failure response received from a registration server cleared."
	    ::= { gpontrap 208 }

	omciSipUdRegTimeout NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Timeout waiting for response from a registration server."
	    ::= { gpontrap 209 }

	omciSipUdRegTimeoutClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Timeout waiting for response from a registration server cleared."
	    ::= { gpontrap 210 }

	omciTcaAlignErrorCount NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Received frames that were not an integral number of octets in length and did not pass the FCS check."
	    ::= { gpontrap 213 }

	omciTcaAlignErrorCountClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Received frames that were not an integral number of octets in length and did not pass the FCS check cleared."
	    ::= { gpontrap 214 }

	omciTcaBridgeLearningEntryDiscard NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Forwarding database entries that have been or would have been learned but were discarded or replaced due to a lack of space in the database table."
	    ::= { gpontrap 217 }

	omciTcaBridgeLearningEntryDiscardClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Forwarding database entries that have been or would have been learned but were discarded or replaced due to a lack of space in the database table cleared."
	    ::= { gpontrap 218 }

	omciTcaBufOverflowsRx NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The number of times that the receive buffer overflowed."
	    ::= { gpontrap 221 }

	omciTcaBufOverflowsRxClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The number of times that the receive buffer overflowed cleared."
	    ::= { gpontrap 222 }

	omciTcaBufOverflowsTx NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The number of times that the transmit buffer overflowed."
	    ::= { gpontrap 223 }

	omciTcaBufOverflowsTxClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The number of times that the transmit buffer overflowed cleared."
	    ::= { gpontrap 224 }

	omciTcaCarrierSenseErrorCount NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The number of times that carrier sense was lost or never asserted when attempting to transmit a frame."
	    ::= { gpontrap 227 }

	omciTcaCarrierSenseErrorCountClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The number of times that carrier sense was lost or never asserted when attempting to transmit a frame cleared."
	    ::= { gpontrap 228 }

	omciTcaDeferredTx NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"First transmission attempt was delayed because the medium was busy."
	    ::= { gpontrap 239 }

	omciTcaDeferredTxClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"First transmission attempt was delayed because the medium was busy cleared."
	    ::= { gpontrap 240 }

	omciTcaDelayExceededDiscard NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Frames discarded on this port because transmission was delayed."
	    ::= { gpontrap 241 }

	omciTcaDelayExceededDiscardClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Frames discarded on this port because transmission was delayed cleared."
	    ::= { gpontrap 242 }

	omciTcaDropEvents NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of events in which packets were dropped due to a lack of resources."
	    ::= { gpontrap 245 }

	omciTcaDropEventsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of events in which packets were dropped due to a lack of resources cleared."
	    ::= { gpontrap 246 }

	omciTcaEncryptionKeyErrors NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"GEM frames with erroneous encryption key indexes."
	    ::= { gpontrap 249 }

	omciTcaEncryptionKeyErrorsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"GEM frames with erroneous encryption key indexes cleared."
	    ::= { gpontrap 250 }

	omciTcaEthFrameDsCrcErroredPackets NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of error packets received on downstream."
	    ::= { gpontrap 255 }

	omciTcaEthFrameDsCrcErroredPacketsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of error packets received on downstream cleared."
	    ::= { gpontrap 256 }

	omciTcaEthFrameDsDropEvents NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of events in which frames were dropped due to a lack of resources on downstream."
	    ::= { gpontrap 257 }

	omciTcaEthFrameDsDropEventsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of events in which frames were dropped due to a lack of resources on downstream cleared."
	    ::= { gpontrap 258 }

	omciTcaEthFrameDsOversizePackets NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were longer than 1518 octets on downstream."
	    ::= { gpontrap 259 }

	omciTcaEthFrameDsOversizePacketsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were longer than 1518 octets on downstream cleared."
	    ::= { gpontrap 260 }

	omciTcaEthFrameDsUndersizePackets NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were less than 64 octets long on downstream."
	    ::= { gpontrap 261 }

	omciTcaEthFrameDsUndersizePacketsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were less than 64 octets long on downstream cleared."
	    ::= { gpontrap 262 }

	omciTcaEthFrameUsCrcErroredPackets NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of error packets received on upstream."
	    ::= { gpontrap 263 }

	omciTcaEthFrameUsCrcErroredPacketsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of error packets received on upstream cleared."
	    ::= { gpontrap 264 }

	omciTcaEthFrameUsDropEvents NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of events in which frames were dropped due to a lack of resources on upstream."
	    ::= { gpontrap 265 }

	omciTcaEthFrameUsDropEventsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of events in which frames were dropped due to a lack of resources on upstream cleared."
	    ::= { gpontrap 266 }

	omciTcaEthFrameUsOversizePackets NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were longer than 1518 octets long on upstream."
	    ::= { gpontrap 267 }

	omciTcaEthFrameUsOversizePacketsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were longer than 1518 octets long on upstream cleared."
	    ::= { gpontrap 268 }

	omciTcaEthFrameUsUndersizePackets NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were less than 64 octets long on upstream."
	    ::= { gpontrap 269 }

	omciTcaEthFrameUsUndersizePacketsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were less than 64 octets long on upstream cleared."
	    ::= { gpontrap 270 }

	omciTcaExcessCollision NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Transmission failed due to excessive collisions."
	    ::= { gpontrap 271 }

	omciTcaExcessCollisionClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Transmission failed due to excessive collisions cleared."
	    ::= { gpontrap 272 }

	omciTcaFcsErrors NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames received on a particular interface that were an integral number of octets in length."
	    ::= { gpontrap 273 }

	omciTcaFcsErrorsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames received on a particular interface that were an integral number of octets in length cleared."
	    ::= { gpontrap 274 }

	omciTcaFragments NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were less than 64 octets long."
	    ::= { gpontrap 277 }

	omciTcaFragmentsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were less than 64 octets long cleared."
	    ::= { gpontrap 278 }

	omciTcaFrameTooLongs NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts received frames that exceeded the maximum permitted frame size."
	    ::= { gpontrap 279 }

	omciTcaFrameTooLongsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts received frames that exceeded the maximum permitted frame size cleared."
	    ::= { gpontrap 280 }

	omciTcaIntMacRx NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames whose reception failed due to an internal MAC sublayer receive error."
	    ::= { gpontrap 283 }

	omciTcaIntMacRxClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames whose reception failed due to an internal MAC sublayer receive error cleared."
	    ::= { gpontrap 284 }

	omciTcaIntMacTx NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames whose transmission failed due to an internal MAC sublayer transmit error."
	    ::= { gpontrap 285 }

	omciTcaIntMacTxClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames whose transmission failed due to an internal MAC sublayer transmit error cleared."
	    ::= { gpontrap 286 }

	omciTcaIpnpmDnsError NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts DNS errors received."
	    ::= { gpontrap 287 }

	omciTcaIpnpmDnsErrorClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts DNS errors received cleared."
	    ::= { gpontrap 288 }

	omciTcaIpnpmIcmpError NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts ICMP errors received."
	    ::= { gpontrap 289 }

	omciTcaIpnpmIcmpErrorClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts ICMP errors received cleared."
	    ::= { gpontrap 290 }

	omciTcaJabbers NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were longer than 1518 octets."
	    ::= { gpontrap 291 }

	omciTcaJabbersClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were longer than 1518 octets cleared."
	    ::= { gpontrap 292 }

	omciTcaLateCollision NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"A collision was detected later than 512 bit times into the transmission of a packet."
	    ::= { gpontrap 293 }

	omciTcaLateCollisionClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"A collision was detected later than 512 bit times into the transmission of a packet cleared."
	    ::= { gpontrap 294 }

	omciTcaMtuExceededDiscard NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames discarded on this port because the MTU was exceeded."
	    ::= { gpontrap 297 }

	omciTcaMtuExceededDiscardClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames discarded on this port because the MTU was exceeded cleared."
	    ::= { gpontrap 298 }

	omciTcaMultiCollisions NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts successfully transmitted frames whose transmission was delayed by more than one collision."
	    ::= { gpontrap 299 }

	omciTcaMultiCollisionsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts successfully transmitted frames whose transmission was delayed by more than one collision cleared."
	    ::= { gpontrap 300 }

	omciTcaPppoeFilteredFrameCount NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts the number of frames discarded due to PPPoE filtering."
	    ::= { gpontrap 301 }

	omciTcaPppoeFilteredFrameCountClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts the number of frames discarded due to PPPoE filtering cleared."
	    ::= { gpontrap 302 }

	omciTcaRxAndDiscarded NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames received on this port that were discarded due to errors."
	    ::= { gpontrap 315 }

	omciTcaRxAndDiscardedClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts frames received on this port that were discarded due to errors cleared."
	    ::= { gpontrap 316 }

	omciTcaSingleCollisionFrame NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts successfully transmitted frames whose transmission was delayed by exactly one collision."
	    ::= { gpontrap 339 }

	omciTcaSingleCollisionFrameClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Counts successfully transmitted frames whose transmission was delayed by exactly one collision cleared."
	    ::= { gpontrap 340 }

	omciTcaSqeCount NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The number of times that the SQE test error message was generated by the PLS sublayer."
	    ::= { gpontrap 363 }

	omciTcaSqeCountClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The number of times that the SQE test error message was generated by the PLS sublayer cleared."
	    ::= { gpontrap 364 }

	omciTcaUndersizePackets NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were less than 64 octets long."
	    ::= { gpontrap 369 }

	omciTcaUndersizePacketsClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"The total number of packets received that were less than 64 octets long cleared."
	    ::= { gpontrap 370 }

	omciTemperatureRed NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Service has been shut down to avoid equipment damage."
	    ::= { gpontrap 373 }

	omciTemperatureRedClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Service has been shut down to avoid equipment damage cleared."
	    ::= { gpontrap 374 }

	omciTemperatureYellow NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No service shutdown at present, but the circuit pack is operating beyond its recommended range."
	    ::= { gpontrap 375 }

	omciTemperatureYellowClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No service shutdown at present, but the circuit pack is operating beyond its recommended range cleared."
	    ::= { gpontrap 376 }

	omciVideoLos NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No signal at the video UNI."
	    ::= { gpontrap 411 }

	omciVideoLosClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No signal at the video UNI cleared."
	    ::= { gpontrap 412 }

	omciVoltageRed NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Some services have been shut down to avoid power collapse."
	    ::= { gpontrap 417 }

	omciVoltageRedClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Some services have been shut down to avoid power collapse cleared."
	    ::= { gpontrap 418 }

	omciVoltageYellowomci NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No service shutdown at present, but the line power voltage is below its recommended minimum."
	    ::= { gpontrap 419 }

	omciVoltageYellowClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"No service shutdown at present, but the line power voltage is below its recommended minimum cleared."
	    ::= { gpontrap 420 }

	omciXtucEsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Errored seconds threshold crossing."
	    ::= { gpontrap 421 }

	omciXtucEsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Errored seconds threshold crossing cleared."
	    ::= { gpontrap 422 }

	omciXtucFailedLineInitializationsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Failure of line initializations threshold crossing."
	    ::= { gpontrap 423 }

	omciXtucFailedLineInitializationsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Failure of line initializations threshold crossing cleared."
	    ::= { gpontrap 424 }

	omciXtucFailedShortInitializationsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Failure of short Initializations threshold crossing."
	    ::= { gpontrap 425 }

	omciXtucFailedShortInitializationsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Failure of short Initializations threshold crossing cleared."
	    ::= { gpontrap 426 }

	omciXtucFecSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C FEC seconds threshold crossing."
	    ::= { gpontrap 427 }

	omciXtucFecSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C FEC seconds threshold crossing cleared."
	    ::= { gpontrap 428 }

	omciXtucLineInitializationsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Line initializations threshold crossing."
	    ::= { gpontrap 429 }

	omciXtucLineInitializationsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Line initializations threshold crossing cleared."
	    ::= { gpontrap 430 }

	omciXtucLossOfFrameSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Loss of frame seconds."
	    ::= { gpontrap 431 }

	omciXtucLossOfFrameSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Loss of frame seconds cleared."
	    ::= { gpontrap 432 }

	omciXtucLossOfLinkSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Loss of link seconds."
	    ::= { gpontrap 433 }

	omciXtucLossOfLinkSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Loss of link seconds cleared."
	    ::= { gpontrap 434 }

	omciXtucLossOfPowerSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Loss of power seconds."
	    ::= { gpontrap 435 }

	omciXtucLossOfPowerSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Loss of power seconds cleared."
	    ::= { gpontrap 436 }

	omciXtucLossOfSignalSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Loss of signal seconds."
	    ::= { gpontrap 437 }

	omciXtucLossOfSignalSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Loss of signal seconds cleared."
	    ::= { gpontrap 438 }

	omciXtucSesTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Severely errored seconds threshold crossing."
	    ::= { gpontrap 439 }

	omciXtucSesTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Severely errored seconds threshold crossing cleared."
	    ::= { gpontrap 440 }

	omciXtucShortInitializationsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Short initializations threshold crossing."
	    ::= { gpontrap 441 }

	omciXtucShortInitializationsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Short initializations threshold crossing cleared."
	    ::= { gpontrap 442 }

	omciXtucUasTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Unavailable seconds threshold crossing."
	    ::= { gpontrap 443 }

	omciXtucUasTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-C Unavailable seconds threshold crossing cleared."
	    ::= { gpontrap 444 }

	omciXturEsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Errored seconds threshold crossing."
	    ::= { gpontrap 445 }

	omciXturEsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Errored seconds threshold crossing cleared."
	    ::= { gpontrap 446 }

	omciXturFecSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Forward error correction anomaly."
	    ::= { gpontrap 447 }

	omciXturFecSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Forward error correction anomaly cleared."
	    ::= { gpontrap 448 }

	omciXturLossOfFrameSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Loss of frame seconds."
	    ::= { gpontrap 449 }

	omciXturLossOfFrameSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Loss of frame seconds cleared."
	    ::= { gpontrap 450 }

	omciXturLossOfPowerSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Loss of power seconds."
	    ::= { gpontrap 451 }

	omciXturLossOfPowerSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Loss of power seconds cleared."
	    ::= { gpontrap 452 }

	omciXturLossOfSignalSecondsTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Loss of signal seconds."
	    ::= { gpontrap 453 }

	omciXturLossOfSignalSecondsTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Loss of signal seconds cleared."
	    ::= { gpontrap 454 }

	omciXturSesTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R severely errored seconds."
	    ::= { gpontrap 455 }

	omciXturSesTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R severely errored seconds cleared."
	    ::= { gpontrap 456 }

	omciXturUasTca NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Unavailable seconds threshold crossing."
	    ::= { gpontrap 457 }

	omciXturUasTcaClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"XTU-R Unavailable seconds threshold crossing cleared."
	    ::= { gpontrap 458 }

	omciHighPowerFeedVoltage NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the power feed voltage is higher than the configured threshold."
	    ::= { gpontrap 459 }

	omciHighPowerFeedVoltageClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the power feed voltage is higher than the configured threshold cleared."
	    ::= { gpontrap 460 }

	omciHighLaserBiasCur NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the laser bias current is higher than the configured threshold."
	    ::= { gpontrap 461 }

	omciHighLaserBiasCurClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the laser bias current is higher than the configured threshold cleared."
	    ::= { gpontrap 462 }

	omciHighTemperature NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the temperature is above the configured threshold."
	    ::= { gpontrap 463 }

	omciHighTemperatureClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"ONU has detected that the temperature is above the configured threshold cleared."
	    ::= { gpontrap 464 }

	omciOntgEqptAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Functional failure on an internal interface."
	    ::= { gpontrap 465 }

	omciOntgEqptAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Functional failure on an internal interface cleared."
	    ::= { gpontrap 466 }

	omciOntgPoweringAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Loss of external power to battery backup unit."
	    ::= { gpontrap 467 }

	omciOntgPoweringAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	    	"Loss of external power to battery backup unit cleared."
	    ::= { gpontrap 468 }

	rogueOntDetect NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponRogueOntDetectStatus, gponOntSerialNumber, gponOntPassword }
	    STATUS  current
	    DESCRIPTION
			"Rogue ont detection. The values of rouge ont detection status are shown as below:
			1: start rogue detection
			2: stop rogue detection
			3: detect rogue exist
			4: rogue ont does not exist
			5: discover rogue ont
			Only detection status equals to 5, the serial number and password of rogue ont would be meaningful.
			Otherwise, the string of serial number and password of ont would be displayed to N/A."
	    ::= { gpontrap 501 }

	newOntDetect NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntSerialNumber, gponOntPassword }
	    STATUS  current
	    DESCRIPTION
	    	"New ont detect."
	    ::= { gpontrap 502 }

	ontSwDlStart NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Software download start."
	    ::= { gpontrap 503 }

	ontSwDlStartClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Software download start cleared."
	    ::= { gpontrap 504 }

	ontSwDlSuccess NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Software download success."
	    ::= { gpontrap 505 }

	ontSwDlFail NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Software download fail."
	    ::= { gpontrap 506 }

	ponLos NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	    	"Pon loss of signal."
	    ::= { gpontrap 507 }

	ponLosClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	    	"Pon loss of signal cleared."
	    ::= { gpontrap 508 }

	omciWanPppoeLinkUp NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, ifAdminStatus, ifOperStatus }
	    STATUS  current
	    DESCRIPTION
	    	"Ont wan port PPPoE link up."
	    ::= { gpontrap 509 }

	omciWanPppoeLinkDown NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, ifAdminStatus, ifOperStatus }
	    STATUS  current
	    DESCRIPTION
	    	"Ont wan port PPPoE link down."
	    ::= { gpontrap 510 }

	gponMacReset NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, gponMacSubSlotId }
	    STATUS  current
	    DESCRIPTION
	    	"Gpon mac reset."
	    ::= { gpontrap 511 }

	ontDdmiRxPowerFail NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, transceiverPerOntRxPower, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin }
	    STATUS  current
	    DESCRIPTION
	    	"ONU DDMI Rx Power out of range."
	    ::= { gpontrap 512 }

	ontDdmiRxPowerFailClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, transceiverPerOntRxPower, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin }
	    STATUS  current
	    DESCRIPTION
	    	"ONU DDMI Rx Power out of range cleared."
	    ::= { gpontrap 513 }

	ponUnableGetOnuPw NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntSerialNumber }
	    STATUS  current
	    DESCRIPTION
	    	"Unable to get password."
	    ::= { gpontrap 514 }

	ponOutOfId NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	    	"This PON port is out of register id for ONU."
	    ::= { gpontrap 515 }

	ddmiTempOutOfRange NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI temperature out of range."
	    ::= { gpontrap 551 }

	ddmiTempOutOfRangeClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI temperature out of range cleared."
	    ::= { gpontrap 552 }

	ddmiTxPwrOutOfRange NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI TxPower out of range."
	    ::= { gpontrap 553 }

	ddmiTxPwrOutOfRangeClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI TxPower out of range cleared."
	    ::= { gpontrap 554 }

	ddmiRxPwrOutOfRange NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI RxPower out of range."
	    ::= { gpontrap 555 }

	ddmiRxPwrOutOfRangeClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI RxPower out of range cleared."
	    ::= { gpontrap 556 }

	ddmiVoltageOutOfRange NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI voltage out of range."
	    ::= { gpontrap 557 }

	ddmiVoltageOutOfRangeClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI voltage out of range cleared."
	    ::= { gpontrap 558 }

	ddmiBiasOutOfRange NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI bias out of range."
	    ::= { gpontrap 559 }

	ddmiBiasOutOfRangeClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, transceiverDdmInfoEntryType, transceiverDdmInfoEntryAlarmMax, transceiverDdmInfoEntryAlarmMin, transceiverDdmInfoEntryWarnMax, transceiverDdmInfoEntryWarnMin, transceiverDdmInfoEntryCurrent }
	    STATUS  current
	    DESCRIPTION
	    	"DDMI bias out of range cleared."
	    ::= { gpontrap 560 }

	gponLinkDown NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifAdminStatus, ifOperStatus }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies one gpon port is linked down."
	    ::= { gpontrap 561 }

	gponLinkUp NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, ifAdminStatus, ifOperStatus }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies one gpon port is linked up."
	    ::= { gpontrap 562 }

	cpuProtectionAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that CPU may become overloaded and be unable to handle regular tasks property due to receiving large numbers of control packets."
	    ::= { gpontrap 563 }

	cpuProtectionAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that disable port(s) become active or start receiving the packets again with error-disable recovery."
	    ::= { gpontrap 564 }

	authorizationFailure NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, slotModuleId, gponUserName }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that 802.1x authorization failure."
	    ::= { gpontrap 565 }

	highIngressRateAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that ingress rate is higher than configured threshold rate."
	    ::= { gpontrap 566 }

	highIngressRateAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that ingress rate is higher than configured threshold rate cleared."
	    ::= { gpontrap 567 }

	highEgressRateAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that egress rate is higher than configured threshold rate."
	    ::= { gpontrap 568 }

	highEgressRateAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that egress rate is higher than configured threshold rate cleared."
	    ::= { gpontrap 569 }

	discoverUnregisterOntAlarm NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntSerialNumber, gponOntPassword }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that system discovers unregistered ont."
	    ::= { gpontrap 570 }

	discoverUnregisterOntAlarmClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntSerialNumber, gponOntPassword }
	    STATUS  current
	    DESCRIPTION
	            "The trap signifies that system discovers unregistered ont cleared."
	    ::= { gpontrap 571 }

	omciTcaEthFrameUsCrcErroredFrames NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	        "The total number of error frames received on upstream."
	    ::= { gpontrap 572 }

	omciTcaEthFrameUsCrcErroredFramesClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	        "The total number of error frames received on upstream cleared."
	    ::= { gpontrap 573 }

	omciTcaEthFrameUsOversizeFrames NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	        "The total number of frames received that were longer than 1518 octets long on upstream."
	    ::= { gpontrap 574 }

	omciTcaEthFrameUsOversizeFramesClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	        "The total number of packets received that were longer than 1518 octets long on upstream cleared."
	    ::= { gpontrap 575 }

	omciTcaEthFrameUsUndersizeFrames NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	        "The total number of frames received that were less than 64 octets long on upstream."
	    ::= { gpontrap 576 }

	omciTcaEthFrameUsUndersizeFramesClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId, gponOntCardId, gponOntCardPortId, gponMeClassId }
	    STATUS  current
	    DESCRIPTION
	        "The total number of frames received that were less than 64 octets long on upstream cleared."
	    ::= { gpontrap 577 }

	ontMacAntiSpoofing NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntMacAntiSpoofOrig, gponOntMacAntiSpoofNew, gponOntMacAntiSpoofMAC }
	    STATUS current
	    DESCRIPTION
	        "The gpon ont MAC anti-spoofing happened."
	    ::= { gpontrap 578 }

	gponOntTcaFecCodeword NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is FEC codeword."
	    ::= { gpontrap 579 }

	gponOntTcaFecCodewordClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is FEC codeword cleared."
	    ::= { gpontrap 580 }
	gponOntTcaBipByte NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is bip byte."
	    ::= { gpontrap 581 }

	gponOntTcaBipByteClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"The trap signifies ont is bip byte cleared."
	    ::= { gpontrap 582 }

	gponOntTcaRxPloamCrc NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Received PLOAMS with CRC errors."
	    ::= { gpontrap 583 }

	gponOntTcaRxPloamCrcClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Received PLOAMS with CRC errors cleared."
	    ::= { gpontrap 584 }

	gponOntTcaRxPloamNonidle NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Received non-idle PLOAMS."
	    ::= { gpontrap 585 }

	gponOntTcaRxPloamNonidleClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Received non-idle PLOAMS cleared."
	    ::= { gpontrap 586 }

	gponOntTcaPositiveDrift NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Accumulated positive drift in bits."
	    ::= { gpontrap 587 }

	gponOntTcaPositiveDriftClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Accumulated positive drift in bits cleared."
	    ::= { gpontrap 588 }

	gponOntTcaNegativeDrift NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Accumulated negative drift in bits."
	    ::= { gpontrap 589 }

	gponOntTcaNegativeDriftClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Accumulated negative drift in bits cleared."
	    ::= { gpontrap 590 }

	gponOntTcaRxOmciPktCrc NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Received OMCI packets with CRC errors."
	    ::= { gpontrap 591 }

	gponOntTcaRxOmciPktCrcClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Received OMCI packets with CRC errors cleared."
	    ::= { gpontrap 592 }

	gponOntTcaUnreceivedBurst NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Un-received Burst allocated to the ONU."
	    ::= { gpontrap 593 }

	gponOntTcaUnreceivedBurstClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Un-received Burst allocated to the ONU cleared."
	    ::= { gpontrap 594}

	gponOntTcaLcdgi NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"LCDGi errors."
	    ::= { gpontrap 595 }

	gponOntTcaLcdgiClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"LCDGi errors cleared."
	    ::= { gpontrap 596}

	gponOntTcaRdi NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"RDi errors."
	    ::= { gpontrap 597 }

	gponOntTcaRdiClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"RDi errors cleared."
	    ::= { gpontrap 598}

	gponOntOmciSuppress NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"OMCI suppress."
	    ::= { gpontrap 599}

	gponOntTcaRxOmciPkt NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Received OMCI packets."
	    ::= { gpontrap 600 }

	gponOntTcaRxOmciPktClear NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex, gponOntId }
	    STATUS  current
	    DESCRIPTION
	    	"Received OMCI packets cleared."
	    ::= { gpontrap 601 }

	gponRogueOntDetection NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	    	"Detect suspected rogue onu."
	    ::= { gpontrap 602 }

	gponRogueOntElimination NOTIFICATION-TYPE
	    OBJECTS { iesIANAEventType, iesIANAProbableCause, ifIndex }
	    STATUS  current
	    DESCRIPTION
	    	"Eliminate suspected rogue onu."
	    ::= { gpontrap 603 }
END