path: root/MIBS/zyxel/ZYXEL-NWA-SERIES_v1-4-2

-- $Id: ZYXEL-NWA-SERIES.mib,v 1.3 2008/01/14 11:20:00 LiKuang Tsai Exp $
-- ZyXEL Communications Corporation
-- Private Enterprise MIB definition
-- This file describes the ZyXEL Communications Corporation Enterprise MIB.
-- It includes object identifiers and object definitions for the ZyXEL
-- Enterprise MIB only, and should be used for compilation by a management
-- tool in order to extend the tool to support the ZyXEL MIB.

    ZYXEL-NWA-SERIES_v1-4-2 DEFINITIONS ::=BEGIN

    IMPORTS
	enterprises, NetworkAddress, PhysAddress, IpAddress, Counter
		FROM RFC1155-SMI
    	RowStatus, RowPointer, DateAndTime, TruthValue
        	FROM SNMPv2-TC
    	OBJECT-TYPE, TimeTicks
        	FROM SNMPv2-SMI
	ifIndex                                 FROM RFC1213-MIB;


	DisplayString	::=	OCTET STRING

 -- tree structure

	zyxel			OBJECT IDENTIFIER ::= { enterprises 890 }

	products		OBJECT IDENTIFIER ::= { zyxel 1 }

	proWireless		OBJECT IDENTIFIER ::= { products 9 }

	pwCommon			OBJECT IDENTIFIER ::= { proWireless 1 }
	pwTraps				OBJECT IDENTIFIER ::= { proWireless 2 }
	pwStations			OBJECT IDENTIFIER ::= { proWireless 3 }
	pwRogueAPDetect		OBJECT IDENTIFIER ::= { proWireless 4 }
	pwWlanControl		OBJECT IDENTIFIER ::= { proWireless 5 }
	pwWlanStatistics		OBJECT IDENTIFIER ::= { proWireless 6 }
	
	nwaSeries		OBJECT IDENTIFIER ::= { proWireless 100 }
	nwa3100 		OBJECT IDENTIFIER ::= { nwaSeries  1 }
        nwa3500 		OBJECT IDENTIFIER ::= { nwaSeries  2 } 
        nwa3160 		OBJECT IDENTIFIER ::= { nwaSeries  3 } 
        nwa3163 		OBJECT IDENTIFIER ::= { nwaSeries  4 } 
        nwa3550 		OBJECT IDENTIFIER ::= { nwaSeries  5 } 
        nwa3165 		OBJECT IDENTIFIER ::= { nwaSeries  6 }
        nwa1100 		OBJECT IDENTIFIER ::= { nwaSeries  7 }
        nwa3166 		OBJECT IDENTIFIER ::= { nwaSeries  8 }

 -- Node: ZyXEL
 -- Node: Products
 -- Node: proWireless
 -- Node: pwCommon		This group contains information dealing
 --				wish the overall proWireless system, such as
 --				software versions, software and configuration download...etc.

	pwSwVersion OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS	read-only
		STATUS	current
		DESCRIPTION 
			"The current software version."
	::= { pwCommon 1 }

	pwCfgVersion OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"The current WLAN configuration version."
	::= { pwCommon 2 }

	pwTftpServer OBJECT-TYPE
		SYNTAX	IpAddress
		ACCESS	read-write
		STATUS	mandatory
		DESCRIPTION
			"TFTP download server IP Address."
	::= { pwCommon 3 }

	pwTftpFileName OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS	read-write
		STATUS	mandatory
		DESCRIPTION
			"TFTP file name in TFTP server."
	::= { pwCommon 4 }

	pwTftpFileType OBJECT-TYPE
		SYNTAX	INTEGER {
			software(1),
			romfile(2),
			textconfig(3)
		}
		ACCESS	read-write
		STATUS	mandatory
		DESCRIPTION
			"File type in TFTP server."
	::= { pwCommon 5 }

	pwTftpOpStatus OBJECT-TYPE
		SYNTAX	INTEGER {
			idle(0),
			inprogress(1),
			failed(2)
			success(3),
			timeout(4)
		}
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"TFTP Operation Status."
	::= { pwCommon 6 }

	pwTftpOpCommand OBJECT-TYPE
		SYNTAX	INTEGER {
			upload(1),
			download(2)
		}
		ACCESS	read-write
		STATUS	mandatory
		DESCRIPTION
			"TFTP Operation Command."
	::= { pwCommon 7 }

	pwSystemReboot OBJECT-TYPE
		SYNTAX	INTEGER {
			running(0),
			reboot(1)
		}
		ACCESS	read-write
		STATUS	mandatory
		DESCRIPTION
			"System Reboot."
	::= { pwCommon 8 }

	pwAutoCfgMessage OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS	read-only
		STATUS	mandatory
		DESCRIPTION
			"The last error massage of Auto Configuration process."

	::= { pwCommon 9 }
	
	pwCPUUsage OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Display the CPU usage information"
        ::= { pwCommon 10 }

	pwMemoryUsage OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Display the memory usage information"
        ::= { pwCommon 11 }

	pwSystemCountry   OBJECT-TYPE
 		SYNTAX OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The country of wlan"
        ::= { pwCommon 13 }

	pwPassword OBJECT-TYPE
		SYNTAX	DisplayString (SIZE (0..255))
		ACCESS	write-only
		STATUS	mandatory
		DESCRIPTION
			"Change system password."
	::= { pwCommon 14 }
--
-- The following table represent the associated station list
--

pwStationTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PwStationEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table lists the associated stations."
        ::= { pwStations 2 }

pwStationEntry OBJECT-TYPE
        SYNTAX      PwStationEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry describing the station information."
        INDEX { pwStationIndex  }
        ::= {  pwStationTable 1 }

PwStationEntry ::= SEQUENCE {
            pwStationIndex         		Integer32,
--            docsDevNmAccessIp           IpAddress,
--            docsDevNmAccessIpMask       IpAddress,
            pwStationMacAddress			OCTET STRING,
            pwStationAssociateTime      DateAndTime,
            pwStationSSID				OCTET STRING,
            pwStationStatus       		RowStatus
        }

pwStationIndex OBJECT-TYPE
        SYNTAX      Integer32 (1..2147483647)
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Index of stations."
        ::= { pwStationEntry 1 }

pwStationMacAddress OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The MAC Addresss of the station."
        DEFVAL { "public" }
        ::= { pwStationEntry 2 }

pwStationAssociateTime OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The associated time of the station."
        ::= { pwStationEntry 3 }

pwStationSSID OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The associated ssid."
        ::= { pwStationEntry 4 }

pwStationStatus OBJECT-TYPE
        SYNTAX      RowStatus
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Controls and reflects the status of rows in this
             the row is active."
        ::= { pwStationEntry 5 }


--
-- Node: pwRogueAPDetect		This group defines the neighbor AP detection
--

--pwRogueAPDetectInterval OBJECT-TYPE
--	SYNTAX INTEGER {
--		disable(0)
--	}
--        MAX-ACCESS  read-write
--        STATUS      current
--        DESCRIPTION
--            "AP Detection Interval, time unit is minute.
--             The range is 10-60 minutes."
--        ::= { pwRogueAPDetect 1 }

pwRogueAPPeriodTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PwRogueAPPeriodEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table lists the rogue AP Period Detection."
        ::= { pwRogueAPDetect 1 }

pwRogueAPPeriodEntry OBJECT-TYPE
        SYNTAX      PwRogueAPPeriodEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry describing the control for rogue AP Period Detection."
	INDEX { ifIndex  }
        ::= {  pwRogueAPPeriodTable 1 }

PwRogueAPPeriodEntry ::= SEQUENCE {
            pwRogueAPPeriodDetection			INTEGER,
            pwRogueAPPeriod				INTEGER,
            pwRogueAPExpirationTime			INTEGER
        }

pwRogueAPPeriodDetection OBJECT-TYPE
         SYNTAX INTEGER {
		disable(0),
		enable(1)
 	}       	
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Control rogue AP Period Detection. enable(1) or disable(0)."
        ::= { pwRogueAPPeriodEntry 1 }

pwRogueAPPeriod OBJECT-TYPE
         SYNTAX INTEGER
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Rogue AP period time. 10~60(min)."
        ::= { pwRogueAPPeriodEntry 2 }

pwRogueAPExpirationTime OBJECT-TYPE
         SYNTAX INTEGER
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Rogue AP Expiration time. 30~180(min)."
        ::= { pwRogueAPPeriodEntry 3 }        	        	
     	        
pwRogueAPDetectTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PwRogueAPDetectEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table lists the neighbor AP."
        ::= { pwRogueAPDetect 2 }

pwRogueAPDetectEntry OBJECT-TYPE
        SYNTAX      PwRogueAPDetectEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry describing the neighbor AP information."
        INDEX { pwRogueAPIndex  }
        ::= {  pwRogueAPDetectTable 1 }

PwRogueAPDetectEntry ::= SEQUENCE {
            pwRogueAPIndex				INTEGER,
            pwRogueAPSSID 				OCTET STRING,
            pwRogueAPMacAddress 		OCTET STRING,
            pwRogueAPChannel     		OCTET STRING,
--            pwRogueAPDetectSignal			Integer32,
--            pwRogueAPDetectNetwork			INTEGER,
            pwRogueAPSecurity 			OCTET STRING,
            pwRogueAPSignal				OCTET STRING
        }

pwRogueAPIndex OBJECT-TYPE
	SYNTAX	INTEGER (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The index of neighbor AP table."
        ::= { pwRogueAPDetectEntry 1 }

pwRogueAPSSID OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The SSID. If SSID of the AP is hidden, it will be displayed as '(Hidden SSID)'."
        ::= { pwRogueAPDetectEntry 2 }

pwRogueAPMacAddress OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The MAC address."
        ::= { pwRogueAPDetectEntry 3 }

pwRogueAPChannel OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The frequency channel ID."
        ::= { pwRogueAPDetectEntry 4 }

pwRogueAPSecurity OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The data security mode."
        ::= { pwRogueAPDetectEntry 5 }

pwRogueAPSignal OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The data signal."
        ::= { pwRogueAPDetectEntry 6 }
        
pwFriendlyAPTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PwFriendlyAPEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table lists the neighbor Friendly AP."
        ::= { pwRogueAPDetect 3 }

pwFriendlyAPEntry OBJECT-TYPE
        SYNTAX      PwFriendlyAPEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry describing the neighbor Friendly AP information."
        INDEX { pwFriendlyAPIndex }
        ::= {  pwFriendlyAPTable 1 }

PwFriendlyAPEntry ::= SEQUENCE {
            pwFriendlyAPIndex			INTEGER,
            pwFriendlyAPSSID			OCTET STRING,
            pwFriendlyAPMacAddress		OCTET STRING,
            pwFriendlyAPChannel			OCTET STRING,
            pwFriendlyAPSecurity		OCTET STRING,
            pwFriendlyAPSignal			OCTET STRING,
            pwFriendlyAPDescription		OCTET STRING
        }

pwFriendlyAPIndex OBJECT-TYPE
	SYNTAX	INTEGER (1..2147483647)
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The index of neighbor friendly AP table."
        ::= { pwFriendlyAPEntry 1 }

pwFriendlyAPSSID OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The SSID. If SSID of the friendly AP is hidden, it will be displayed as '(Hidden SSID)'."
        ::= { pwFriendlyAPEntry 2 }

pwFriendlyAPMacAddress OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The friendly AP MAC address. When setting this item, 
	    a new entry of frienly AP will be added."
        ::= { pwFriendlyAPEntry 3 }

pwFriendlyAPChannel OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The frequency channel ID."
        ::= { pwFriendlyAPEntry 4 }

pwFriendlyAPSecurity OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The data security mode."
        ::= { pwFriendlyAPEntry 5 }

pwFriendlyAPSignal OBJECT-TYPE
	SYNTAX	OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The data signal."
        ::= { pwFriendlyAPEntry 6 }
        
pwFriendlyAPDescription OBJECT-TYPE
        SYNTAX      OCTET STRING
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Description of friendly AP. When setting this item, 
	    the description field of relative entry will be updated"
        ::= { pwFriendlyAPEntry 7 }


--
-- Node: pwMacFilter		This group defines the MAC Filter
--
pwWlanControlTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PwWlanControlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table lists WLAN control information. Use chipIndex as the index of each entry"
        ::= { pwWlanControl 1 }

pwWlanControlEntry OBJECT-TYPE
        SYNTAX      PwWlanControlEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry describing WLAN control information for each chip."
        INDEX { ifIndex  }
        ::= {  pwWlanControlTable 1 }

PwWlanControlEntry ::= SEQUENCE {
            pwWlanMode          		INTEGER,
            pwWlanSupportedChannel 		OCTET STRING,
            pwWlanChannel     			INTEGER,
            pwWlanTxPower 				INTEGER,
            pwAutoChannelSelection		INTEGER,
            pwCurrentChannel			INTEGER,
            pwStationCount				Counter32,
	    	pwWlanSupportedMode			OCTET STRING
        }

pwWlanMode  OBJECT-TYPE
 	SYNTAX INTEGER {
 			mode_802_11b(1),
 			mode_802_11g(2),
 			mode_802_11bg(3),
 			mode_802_11a(4),
 			mode_802_11ng(6),
 			mode_802_11na(7)
 		}
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The mode of wlan right now."
        ::= { pwWlanControlEntry 1 }

pwWlanSupportedChannel   OBJECT-TYPE
 	SYNTAX OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The all channel supported by wlan"
        ::= { pwWlanControlEntry 3 }

pwWlanChannel   OBJECT-TYPE
 	SYNTAX INTEGER {
 			channel-01_2412mhz(1),
 			channel-02_2417mhz(2),
 			channel-03_2422mhz(3),
 			channel-04_2427mhz(4),
			channel-05_2432mhz(5),
			channel-06_2437mhz(6),
			channel-07_2442mhz(7),
			channel-08_2447mhz(8),
			channel-09_2452mhz(9),
			channel-10_2457mhz(10),
			channel-11_2462mhz(11),
			channel-12_2467mhz(12),
			channel-13_2472mhz(13),

			channel-36_5180mhz(36),
			channel-40_5200mhz(40),
			channel-44_5220mhz(44),
			channel-48_5240mhz(48),
			channel-52_5260mhz(52),
			channel-56_5280mhz(56),
			channel-60_5300mhz(60),
			channel-64_5320mhz(64),
			channel-100_5500mhz(100),
			channel-104_5520mhz(104),
			channel-108_5540mhz(108),
			channel-112_5560mhz(112),
			channel-116_5580mhz(116),
			channel-120_5600mhz(120),
			channel-124_5620mhz(124),
			channel-128_5640mhz(128),
			channel-132_5660mhz(132),
			channel-136_5680mhz(136),
			channel-140_5700mhz(140),
			channel-149_5745mhz(149),
			channel-153_5765mhz(153),
			channel-157_5785mhz(157),
			channel-161_5805mhz(161),
			channel-165_5825mhz(165)
 		}
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "The current channel of wlan right now. When setting this 
	    parameter, the value should be a subset of all supported channel"
        ::= { pwWlanControlEntry 4 }

pwWlanTxPower OBJECT-TYPE
 		SYNTAX INTEGER {
 			full(1),
 			half(2),
 			quarter(4),
 			eighth(8),
			minimum(16)

 		}
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "To specify the RF transmission power."
        ::= { pwWlanControlEntry 5 }    
        
pwAutoChannelSelection OBJECT-TYPE
 		SYNTAX INTEGER {
 			disable(0),
 			enble(1)
 		}
        MAX-ACCESS  read-write
        STATUS      current
        DESCRIPTION
            "Enable/disable Auto Channel Selection."
        ::= { pwWlanControlEntry 6 }

pwCurrentChannel OBJECT-TYPE
 		SYNTAX INTEGER {
 			device_is_disable(0),
 			channel-01_2412mhz(1),
 			channel-02_2417mhz(2),
 			channel-03_2422mhz(3),
 			channel-04_2427mhz(4),
			channel-05_2432mhz(5),
			channel-06_2437mhz(6),
			channel-07_2442mhz(7),
			channel-08_2447mhz(8),
			channel-09_2452mhz(9),
			channel-10_2457mhz(10),
			channel-11_2462mhz(11),
			channel-12_2467mhz(12),
			channel-13_2472mhz(13),

			channel-36_5180mhz(36),
			channel-40_5200mhz(40),
			channel-44_5220mhz(44),
			channel-48_5240mhz(48),
			channel-52_5260mhz(52),
			channel-56_5280mhz(56),
			channel-60_5300mhz(60),
			channel-64_5320mhz(64),
			channel-100_5500mhz(100),
			channel-104_5520mhz(104),
			channel-108_5540mhz(108),
			channel-112_5560mhz(112),
			channel-116_5580mhz(116),
			channel-120_5600mhz(120),
			channel-124_5620mhz(124),
			channel-128_5640mhz(128),
			channel-132_5660mhz(132),
			channel-136_5680mhz(136),
			channel-140_5700mhz(140),
			channel-149_5745mhz(149),
			channel-153_5765mhz(153),
			channel-157_5785mhz(157),
			channel-161_5805mhz(161),
			channel-165_5825mhz(165)
 		}
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "Current Operating channel."
        ::= { pwWlanControlEntry 7 }        

pwStationCount   OBJECT-TYPE
 	SYNTAX Counter32
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The total number of ssocited stations"
        ::= { pwWlanControlEntry 8 }
        	
pwWlanSupportedMode   OBJECT-TYPE
	SYNTAX OCTET STRING
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
            "The all mode supported by wlan"
        ::= { pwWlanControlEntry 9 }

--
-- Node: pwWlanStatistics		Copy from dot11CountersTable
--

pwWlanStatisticsTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF PwWlanStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table lists WLAN statistics information. Use chipIndex as the index of each entry"
        ::= { pwWlanStatistics 1 }

pwWlanStatisticsEntry OBJECT-TYPE
        SYNTAX      PwWlanStatisticsEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "An entry describing WLAN statistics information."
        INDEX { ifIndex  }
        ::= {  pwWlanStatisticsTable 1 }

PwWlanStatisticsEntry ::= SEQUENCE {
            pwDot11FailedCount          	Counter32,
            pwDot11RetryCount 			Counter32,
            pwDot11ACKFailureCount 		Counter32,
            pwDot11ReceivedFragmentCount     	Counter32,
            pwDot11TransmittedFrameCount 	Counter32,
            pwDot11ReceivedPktCount     	Counter32,
            pwDot11TransmittedPktCount 		Counter32,
            pwDot11ReceptionRate     		Counter32,
            pwDot11TransmissionRate 		Counter32
        }

pwDot11FailedCount  OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION

        "This counter shall increment when an MSDU is not transmitted
        successfully due to the number of transmit attempts exceeding
        either the  dot11ShortRetryLimit or dot11LongRetryLimit. "

    ::= {  pwWlanStatisticsEntry 1 }

pwDot11RetryCount OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION

            "This counter shall increment when an MSDU is successfully
            transmitted after one or more retransmissions."
    ::= {  pwWlanStatisticsEntry 2 }

pwDot11ACKFailureCount OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION

            "This counter shall increment when an ACK is not received
            when expected."

    ::= {  pwWlanStatisticsEntry 3 }

pwDot11ReceivedFragmentCount OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION

            "This counter shall be incremented for each successfully
            received MPDU of type Data or Management."

    ::= {  pwWlanStatisticsEntry 4 }

pwDot11TransmittedFrameCount  OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION

"This counter shall increment for each successfully transmitted MSDU."

    ::= {  pwWlanStatisticsEntry 5 }

pwDot11ReceivedPktCount  OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
				"This counter shall increment for each successfully received packets every five minutes."

    ::= {  pwWlanStatisticsEntry 6 }
    
pwDot11TransmittedPktCount  OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
				"This counter shall increment for each successfully transmitted packets every five minutes."

    ::= {  pwWlanStatisticsEntry 7 }
    
pwDot11ReceptionRate  OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
				"Reception Rate in Byte per second."

    ::= {  pwWlanStatisticsEntry 8 }
    
pwDot11TransmissionRate  OBJECT-TYPE
        SYNTAX Counter32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION
				"Transmission Rate in Byte per second."

    ::= {  pwWlanStatisticsEntry 9 }
 
 
 -- Node: pwTraps		This group defines information of pro wireless product
 --						specific snmpv2 notifications. 
 --						Including control variables to enable / disable 
 -- 					sending trap.
 	                                                       
	pwTrapControl		OBJECT IDENTIFIER ::= { pwTraps 1 } 	                                                       
 	pwTrapVariables		OBJECT IDENTIFIER ::= { pwTraps 2 }
 	pwTrapTypes			OBJECT IDENTIFIER ::= { pwTraps 3 }  
 	
 	pwWirelessTraps		OBJECT IDENTIFIER ::= { pwTrapTypes 1 }
 	pwSecurityTraps		OBJECT IDENTIFIER ::= { pwTrapTypes 2 }
 	pwTFTPTraps			OBJECT IDENTIFIER ::= { pwTrapTypes 3 }
 	
 -- 	Control
 	pwTrapWirelessStatus OBJECT-TYPE
 		SYNTAX INTEGER {
 			enable(1),
 			disable(2)
 		}
 		MAX-ACCESS read-write
 		STATUS current
 		DESCRIPTION
 		"Controls wireless group traps enable or disable."
 	::= { pwTrapControl 1 }
 	
 	pwTrapSecurityStatus OBJECT-TYPE
 		SYNTAX INTEGER {
 			enable(1),
 			disable(2)
 		}
 		MAX-ACCESS read-write
 		STATUS current
 		DESCRIPTION
 		"Controls security group traps enable or disable."
 	::= { pwTrapControl 2 }
 	
 	pwTrapTFTPStatus  OBJECT-TYPE
 		SYNTAX INTEGER {
 			enable(1),
 			disable(2)
 		}
 		MAX-ACCESS read-write
 		STATUS current
 		DESCRIPTION
 		"Controls TFTP group traps enable or disable."
 	::= { pwTrapControl 3 }

 	 	              
 -- 	Trap variables
 	pwTrapGenericMessage OBJECT-TYPE 
 	    SYNTAX DisplayString
    	MAX-ACCESS accessible-for-notify
    	STATUS current
    	DESCRIPTION
		"Provide generic information on traps."
    ::= { pwTrapVariables 1 }
    
    pwTrapMACAddress OBJECT-TYPE
    	SYNTAX DisplayString
    	MAX-ACCESS accessible-for-notify
    	STATUS current
    	DESCRIPTION
		"Represents MAC address of the device or the host 
		which triggers the trap."
    ::= { pwTrapVariables 2 }
    
    pwTrapWlanSSID OBJECT-TYPE
    	SYNTAX DisplayString
    	MAX-ACCESS accessible-for-notify
    	STATUS current
    	DESCRIPTION
		"The SSID name which the wireless client associates."
    ::= { pwTrapVariables 3 }
 	              
 -- 	Wireless Traps
 -- 		Assocication, Disassociation
 	pwWlanStaAssociation NOTIFICATION-TYPE
		STATUS	current
		DESCRIPTION
			"Wireless client assocication notification."
	::= { pwWirelessTraps 1 }    
	                           
	pwWlanStaDisassociation NOTIFICATION-TYPE
		STATUS	current
		DESCRIPTION
			"Wireless client disassocication notification."
	::= { pwWirelessTraps 2 }  
	                           
 -- 	Security Traps
 --         Client authenticate failed
 
	pwWlanStaAuthFail NOTIFICATION-TYPE
		STATUS	current
		DESCRIPTION
			"Wireless client authentication failed."
	::= { pwSecurityTraps 1 }  

 --		TFTP Traps
 --			Status

	pwTFTPStatus NOTIFICATION-TYPE
		OBJECTS {pwTrapGenericMessage, pwTftpOpStatus, pwTftpServer, 
		pwTftpFileName, pwTftpFileType, pwTftpOpCommand }
		STATUS current
		DESCRIPTION
			"Send when TFTP operation completed, or stopped due to some reason. 
			For example, timeout or wrong configuration."
	::= { pwTFTPTraps 1 }
END