mibs/MIBS/ATM-FORUM-MIB

1258 lines
38 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ATM-FORUM-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString FROM RFC1213-MIB
enterprises, Counter, IpAddress FROM RFC1155-SMI
OBJECT-TYPE FROM RFC-1212;
--atmForum MODULE-IDENTITY
-- LAST-UPDATED "200003010000Z"
-- ORGANIZATION "Juniper Networks, Inc."
-- CONTACT-INFO
-- " Ramana Gadagottu
-- Juniper Networks, Inc.
-- 385 Ravendale Drive
-- Mountain View, CA 94043
-- E-mail: ramana@juniper.net"
--
-- DESCRIPTION
-- "The MIB modules representing Juniper Networks'
-- implementation of ILMI MIBs
-- supported by a single SNMP agent."
-- ::= { enterprises 353 }
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
------------------------------------------------------------------------
-- a subtree for defining administrative
-- object identifiers
atmForumAdmin OBJECT IDENTIFIER ::= { atmForum 1 }
-- a subtree for defining UNI MIB object types
atmForumUni OBJECT IDENTIFIER ::= { atmForum 2 }
------------------------------------------------------------------------
-- Textual Conventions
-- All representations of ATM addresses in this MIB Module use
-- the data type:
AtmAddress ::= OCTET STRING (SIZE (0 .. 32))
-- Note this data type is used only by the deprecated object
-- atmfPortAddress. Another definition (a refined one) is
-- specified in the separate MIB for Address Registration.
-- Representations in this MIB Module of an ATM address
-- use the data type:
AtmAddress2 ::= OCTET STRING (SIZE (8 | 20))
-- Representations in this MIB Module of a network-prefix
-- for an ATM address use the data type:
NetPrefix ::= OCTET STRING (SIZE (8 | 13))
-- in both the AtmAddress2 and NetPrefix conventions, non-NSAP-encoded E.164
-- addresses are represented as 8 octets using the format specified in
-- section 5.1.3.1.4.
-- In contrast, an NSAP-encoded address is 20 octets, and an
-- NSAP-encoded network
-- prefix is 13 octets long.
------------------------------------------------------------------------
-- Object Identifier definitions
-- The following values are defined for use as possible values
-- of the atmfPortTransmissionType object.
atmfTransmissionTypes OBJECT IDENTIFIER ::= { atmForumAdmin 2 }
-- unknown transmission type
atmfUnknownType
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 1}
-- Sonet STS-3c physical layer at 155.52 Mbps
atmfSonetSTS3c
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 2 }
-- DS3 physical layer at 44.736 Mbps
atmfDs3
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 3 }
-- 4B/5B encoding physical layer at 100 Mbps
atmf4B5B
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 4 }
-- 8B/10B encoding physical layer at 155.52 Mbps
atmf8B10B
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 5 }
-- The following values are defined for use as possible values
-- of the atmfPortMediaType object.
atmfMediaTypes OBJECT IDENTIFIER ::= { atmForumAdmin 3 }
-- unknown media type
atmfMediaUnknownType
OBJECT IDENTIFIER ::= { atmfMediaTypes 1 }
-- Coaxial cable
atmfMediaCoaxCable
OBJECT IDENTIFIER ::= { atmfMediaTypes 2 }
-- Single Mode fiber
atmfMediaSingleMode
OBJECT IDENTIFIER ::= { atmfMediaTypes 3 }
-- Multi Mode fiber
atmfMediaMultiMode
OBJECT IDENTIFIER ::= { atmfMediaTypes 4 }
-- Shielded Twisted Pair
atmfMediaStp
OBJECT IDENTIFIER ::= { atmfMediaTypes 5 }
-- Unshielded Twisted Pair
atmfMediaUtp
OBJECT IDENTIFIER ::= { atmfMediaTypes 6 }
-- The following values are defined for use as possible values
-- of the atmfVpcTransmitTrafficDescriptorType,
-- atmfVpcReceiveTrafficDescriptorType,
-- atmfVccTransmitTrafficDescriptorType and
-- atmfVccReceiveTrafficDescriptorType objects.
atmfTrafficDescrTypes OBJECT IDENTIFIER ::= { atmForumAdmin 4 }
-- The "None" Traffic Descriptor Type
atmfNoDescriptor
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 1 }
--
atmfPeakRate
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 2 }
-- This type is no longer used
--
-- The No CLP/No SCR Type
atmfNoClpNoScr
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 3 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameters #2, #3, #4 and #5 are unused
--
-- The CLP without Tagging/No SCR Type
atmfClpNoTaggingNoScr
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 4 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - peak cell rate in cells/second for CLP=0 traffic
-- Parameters #3, #4 and #5 are unused
--
-- The CLP with Tagging/No SCR Type
atmfClpTaggingNoScr
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 5 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - peak cell rate in cells/second for
-- CLP=0 traffic, excess tagged as CLP=1
-- Parameters #3, #4 and #5 are unused
--
-- The SCR/No CLP Type
atmfNoClpScr
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 6 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0+1 traffic
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused
--
-- The CLP without Tagging/SCR Type
atmfClpNoTaggingScr
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 7 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0 traffic
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused
--
-- The CLP with Tagging/SCR Type
atmfClpTaggingScr
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 8 }
-- The use of the parameter vector for this type:
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0
-- traffic, excess tagged as CLP=1
-- Parameter #3 - maximum burst size in cells
-- Parameters #4 and #5 are unused
------------------------------------------------------------------------
-- The MIB groups
atmfPhysicalGroup OBJECT IDENTIFIER ::= { atmForumUni 1 }
atmfAtmLayerGroup OBJECT IDENTIFIER ::= { atmForumUni 2 }
atmfAtmStatsGroup OBJECT IDENTIFIER ::= { atmForumUni 3 }
atmfVpcGroup OBJECT IDENTIFIER ::= { atmForumUni 4 }
atmfVccGroup OBJECT IDENTIFIER ::= { atmForumUni 5 }
-- New MIB Groups
atmfAddressGroup OBJECT IDENTIFIER ::= { atmForumUni 6 }
atmfNetPrefixGroup OBJECT IDENTIFIER ::= { atmForumUni 7 }
------------------------------------------------------------------------
-- The Physical Port Group
-- This group is mandatory for all UNI devices.
--
-- The Physical Port Table
atmfPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of physical layer status and parameter information for the
UNI's physical interface."
::= { atmfPhysicalGroup 1 }
atmfPortEntry OBJECT-TYPE
SYNTAX AtmfPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing information about the physical layer
of a UNI interface."
INDEX { atmfPortIndex }
::= { atmfPortTable 1 }
AtmfPortEntry ::=
SEQUENCE {
atmfPortIndex
INTEGER,
atmfPortAddress
AtmAddress,
atmfPortTransmissionType
OBJECT IDENTIFIER,
atmfPortMediaType
OBJECT IDENTIFIER,
atmfPortOperStatus
INTEGER,
atmfPortSpecific
OBJECT IDENTIFIER,
atmfPortMyIfName
DisplayString
}
atmfPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value which identifies this port. The value of 0 has the
special meaning of identifying the local UNI."
::= { atmfPortEntry 1 }
atmfPortAddress OBJECT-TYPE
SYNTAX AtmAddress
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object should not be implemented except as required for backward
compatibility with version 2.0 of the UNI specification. The Address Group,
defined as part of the separate Address Registration MIB should be used
instead."
::= { atmfPortEntry 2 }
atmfPortTransmissionType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The transmission type of this port. For example, for a port using the
Sonet STS-3c physical layer at 155.52 Mbs, this object would have the
Object Identifier value: atmfSonetSTS3c."
::= { atmfPortEntry 3 }
atmfPortMediaType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of media being used on this port. For example, for a port using
coaxial cable, this object would have the Object Identifier value:
atmfMediaCoaxCable."
::= { atmfPortEntry 4 }
atmfPortOperStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
inService(2),
outOfService(3),
loopBack(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The operational (i.e., actual) state of this port.
The ILMI should not alarm on a physical interface for when the value of this
object is outOfService(3). This capability is useful if equipment is to be
disconnected, or for troubleshooting purposes.
A value of loopBack(4) indicates that a local loopback is in place. "
::= { atmfPortEntry 5 }
atmfPortSpecific OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This object 'points' to additional transmission and/or media specific
information relating to this port. In particular, this object's value
is the name of a specific instance of the first columnar object of a MIB
table with such additional information, where the specific instance is the
one which corresponds to this port.
For example, for a DS3 interface, this object would contain the value, as
defined in RFC 1407:
dsx3LineIndex.i
where i would be the integer value uniquely identifying the DS3 interface
corresponding to this port. If no additional transmission and/or media
specific information is available, this object has the value { 0 0 }."
::= { atmfPortEntry 6 }
atmfPortMyIfName OBJECT-TYPE
SYNTAX DisplayString
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A textual name of this interface. If this systme is manageable through
SNMP, and supports the object ifName, the value of this object must be
identical with that of ifName for the ifEntry of the lowest level physical
interface for this port. This interface must be uniquely names on this system
to distinguish parallel links with a neighboring system. If this interface
does not have a textual name, the value of this object is a zero length
string."
::= { atmfPortEntry 7 }
------------------------------------------------------------------------
-- Note: Typical UME will support only one of the following two objects
atmfMyIpNmAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An IP Address to which a Network Management Station can send Network
Management protocol, e.g. SNMP messages to UDP port 161, in order to
access network management information concerning the operation of the
ATM devide local to this UME."
::= { atmfPhysicalGroup 2 }
-- atmfMyOsiNmNsapAddress OBJECT-TYPE
-- SYNTAX NsapAddress
-- ACCESS read-only
-- STATUS mandatory
-- DESCRIPTION
-- "An NSAP Address to which a Network Management Station can send Network
-- Management protocol messages in order to access network management
-- information concerning the operation of the ATM devide local to this UME."
-- ::= { atmfPhysicalGroup 3 }
------------------------------------------------------------------------
-- The ATM Layer Group
-- This group is mandatory for all UNI devices.
--
-- ATM-layer specific information for the UNI interface
atmfAtmLayerTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfAtmLayerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of ATM layer status and parameter information for the UNI's
physical interface."
::= { atmfAtmLayerGroup 1 }
atmfAtmLayerEntry OBJECT-TYPE
SYNTAX AtmfAtmLayerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing information about the ATM layer of a UNI
interface."
INDEX { atmfAtmLayerIndex }
::= { atmfAtmLayerTable 1 }
AtmfAtmLayerEntry ::=
SEQUENCE {
atmfAtmLayerIndex
INTEGER,
atmfAtmLayerMaxVPCs
INTEGER,
atmfAtmLayerMaxVCCs
INTEGER,
atmfAtmLayerConfiguredVPCs
INTEGER,
atmfAtmLayerConfiguredVCCs
INTEGER,
atmfAtmLayerMaxVpiBits
INTEGER,
atmfAtmLayerMaxVciBits
INTEGER,
atmfAtmLayerUniType
INTEGER,
atmfAtmLayerUniVersion
INTEGER
}
atmfAtmLayerIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value which identifies the UNI port. The value of 0 has the
special meaning of identifying the local UNI."
::= { atmfAtmLayerEntry 1 }
atmfAtmLayerMaxVPCs OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of switched and permanent VPCs supported on this UNI."
::= { atmfAtmLayerEntry 2 }
atmfAtmLayerMaxVCCs OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The maximum number of switched and permanent VCCs supported on this UNI."
::= { atmfAtmLayerEntry 3 }
atmfAtmLayerConfiguredVPCs OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of permanent VPCs configured for use on this UNI."
::= { atmfAtmLayerEntry 4 }
atmfAtmLayerConfiguredVCCs OBJECT-TYPE
SYNTAX INTEGER (0..16777215)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of permanent VCCs configured for use on this UNI."
::= { atmfAtmLayerEntry 5 }
atmfAtmLayerMaxVpiBits OBJECT-TYPE
SYNTAX INTEGER (0..8)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active VPI bits on this interface."
::= {atmfAtmLayerEntry 6 }
atmfAtmLayerMaxVciBits OBJECT-TYPE
SYNTAX INTEGER (0..16)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of active VCI bits on this interface."
::= {atmfAtmLayerEntry 7 }
atmfAtmLayerUniType OBJECT-TYPE
SYNTAX INTEGER {public(1), private(2)}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of the ATM UNI, either public or private."
::= { atmfAtmLayerEntry 8 }
atmfAtmLayerUniVersion OBJECT-TYPE
SYNTAX INTEGER {
version2point0(1),
version3point0(2),
version3point1(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"An indication of the latest version of the ATM Forum UNI Specification
that is supported on this UNI. If this value is not present, a version
of the UNI earlier than 3.1 is supported. If a value greated than
version3point1 is persent, then UNI 3.1 communication should be attempt.
If the peer UNE's value of this object is the same as, or later than the
local UME's value, then the version corresponding to the local UME's
value should be attempted. Otherwise, if the peer UME's value of this
object is earlier, and supported locally, then the local UME should attempt
the version corresponding to the peer UME's value. Otherwise, compatability
of the two UMEs cannot be assumed."
::= { atmfAtmLayerEntry 9 }
------------------------------------------------------------------------
-- The ATM Statistics Group
-- This group is optional. However, if any objects in this group
-- are supported, then all objects in the group must be supported.
--
-- ATM-layer statistics for the UNI interface
atmfAtmStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfAtmStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of ATM layer statistics information for
the UNI's physical interface."
::= { atmfAtmStatsGroup 1 }
atmfAtmStatsEntry OBJECT-TYPE
SYNTAX AtmfAtmStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing statistics for the ATM layer of a
UNI interface."
INDEX { atmfAtmStatsIndex }
::= { atmfAtmStatsTable 1 }
AtmfAtmStatsEntry ::=
SEQUENCE {
atmfAtmStatsIndex
INTEGER,
atmfAtmStatsReceivedCells
Counter,
atmfAtmStatsDroppedReceivedCells
Counter,
atmfAtmStatsTransmittedCells
Counter
}
atmfAtmStatsIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value which identifies the UNI port. The value of 0 has the
special meaning of identifying the local UNI."
::= { atmfAtmStatsEntry 1 }
atmfAtmStatsReceivedCells OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The accumulated number of ATM cells received on this UNI which were
assigned and not dropped."
::= { atmfAtmStatsEntry 2 }
atmfAtmStatsDroppedReceivedCells OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The accumulated number of ATM cells which were dropped for the reasons
defined in section 4.4.4.2."
::= { atmfAtmStatsEntry 3 }
atmfAtmStatsTransmittedCells OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The accumulated number of assigned ATM cells which were transmitted across
this interface."
::= { atmfAtmStatsEntry 4 }
------------------------------------------------------------------------
-- The Virtual Path Group
-- This group is mandatory for all UNI devices.
--
-- Information concerning Virtual Path Connections
atmfVpcTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfVpcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of status and parameter information on the virtual path connections
which cross this UNI. These is one entry in this table for each permanent
virtual path connection."
::= { atmfVpcGroup 1 }
atmfVpcEntry OBJECT-TYPE
SYNTAX AtmfVpcEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing information about a particular virtual path
connection."
INDEX { atmfVpcPortIndex, atmfVpcVpi }
::= { atmfVpcTable 1 }
AtmfVpcEntry ::=
SEQUENCE {
atmfVpcPortIndex
INTEGER,
atmfVpcVpi
INTEGER,
atmfVpcOperStatus
INTEGER,
atmfVpcTransmitTrafficDescriptorType
OBJECT IDENTIFIER,
atmfVpcTransmitTrafficDescriptorParam1
INTEGER,
atmfVpcTransmitTrafficDescriptorParam2
INTEGER,
atmfVpcTransmitTrafficDescriptorParam3
INTEGER,
atmfVpcTransmitTrafficDescriptorParam4
INTEGER,
atmfVpcTransmitTrafficDescriptorParam5
INTEGER,
atmfVpcReceiveTrafficDescriptorType
OBJECT IDENTIFIER,
atmfVpcReceiveTrafficDescriptorParam1
INTEGER,
atmfVpcReceiveTrafficDescriptorParam2
INTEGER,
atmfVpcReceiveTrafficDescriptorParam3
INTEGER,
atmfVpcReceiveTrafficDescriptorParam4
INTEGER,
atmfVpcReceiveTrafficDescriptorParam5
INTEGER,
atmfVpcQoSCategory
INTEGER,
atmfVpcTransmitQoSClass
INTEGER,
atmfVpcReceiveQoSClass
INTEGER
}
atmfVpcPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value which identifies the UNI port. The value of 0 has the
special meaning of identifying the local UNI."
::= { atmfVpcEntry 1 }
atmfVpcVpi OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VPI value of this Virtual Path Connection at the local UNI."
::= { atmfVpcEntry 2 }
atmfVpcOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
end2endUp(2),
end2endDown(3),
localUpEnd2endUnknown(4),
localDown(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present actual operational status of the VPC.
A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end
status is known. If only local status information is available, a value of
localUpEnd2endUnknown(4) or localDown(5) would be used."
::= { atmfVpcEntry 3 }
atmfVpcTransmitTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic management, applicable to the transmit direction of
this VPC. The type may indicate none, or a type with one or more parameters.
These parameters are specified as a parameter vector, in the corresponding
instances of the objects:
atmfVpcTransmitTrafficDescriptorParam1,
atmfVpcTransmitTrafficDescriptorParam2,
atmfVpcTransmitTrafficDescriptorParam3,
atmfVpcTransmitTrafficDescriptorParam4, and
atmfVpcTransmitTrafficDescriptorParam5."
::= { atmfVpcEntry 4 }
atmfVpcTransmitTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first parameter of the transmit parameter vector for this VPC, used
according to the value of atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 5 }
atmfVpcTransmitTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second parameter of the transmit parameter vector for this VPC, used
according to the value of atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 6 }
atmfVpcTransmitTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third parameter of the transmit parameter vector for this VPC, used
according to the value of atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 7 }
atmfVpcTransmitTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth parameter of the transmit parameter vector for this VPC, used
according to the value of atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 8 }
atmfVpcTransmitTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth parameter of the transmit parameter vector for this VPC, used
according to the value of atmfVpcTransmitTrafficDescriptorType."
::= { atmfVpcEntry 9 }
atmfVpcReceiveTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic management, applicable to the traffic in the receive
direction of this VPC. The type may indicate none, or a type with one or
more parameters. These parameters are specified as a parameter vector, in
the corresponding instances of the objects:
atmfVpcReceiveTrafficDescriptorParam1,
atmfVpcReceiveTrafficDescriptorParam2,
atmfVpcReceiveTrafficDescriptorParam3,
atmfVpcReceiveTrafficDescriptorParam4, and
atmfVpcReceiveTrafficDescriptorParam5."
::= { atmfVpcEntry 10 }
atmfVpcReceiveTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first parameter of the receive parameter vector for this VPC, used
according to the value of atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 11 }
atmfVpcReceiveTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second parameter of the receive parameter vector for this VPC, used
according to the value of atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 12 }
atmfVpcReceiveTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third parameter of the receive parameter vector for this VPC, used
according to the value of atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 13 }
atmfVpcReceiveTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth parameter of the receive parameter vector for this VPC, used
according to the value of atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 14 }
atmfVpcReceiveTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth parameter of the receive parameter vector for this VPC, used
according to the value of atmfVpcReceiveTrafficDescriptorType."
::= { atmfVpcEntry 15 }
atmfVpcQoSCategory OBJECT-TYPE
SYNTAX INTEGER {
other(1),
deterministic (2),
statistical (3),
unspecified (4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object should not be implemented except as required for backward
compatibility with version 2.0 of the UNI specification."
::= { atmfVpcEntry 16 }
atmfVpcTransmitQoSClass OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The QoS Class, as defined in section 4 of Appendix A, for the transmit
direction of this VPC connection at the local UNI."
::= { atmfVpcEntry 17 }
atmfVpcReceiveQoSClass OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The QoS Class, as defined in section 4 of Appendix A, for the receive
direction of this VPC connection at the local UNI."
::= { atmfVpcEntry 18 }
------------------------------------------------------------------------
-- The Virtual Channel Group
-- This group is mandatory for all UNI devices.
--
-- Information concerning Virtual Channel Connections
atmfVccTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfVccEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table of status and parameter information on the virtual channel
connections which are visible at this UNI. There is one entry in this
table for each permanent virtual channel connection, including reserved
VCC that are supported: e.g., signalling, OAM flows, and ILMI, but not
unassigned cells."
::= { atmfVccGroup 1 }
atmfVccEntry OBJECT-TYPE
SYNTAX AtmfVccEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An entry in the table, containing information about a particular virtual
channel connection."
INDEX { atmfVccPortIndex, atmfVccVpi, atmfVccVci }
::= { atmfVccTable 1 }
AtmfVccEntry ::=
SEQUENCE {
atmfVccPortIndex
INTEGER,
atmfVccVpi
INTEGER,
atmfVccVci
INTEGER,
atmfVccOperStatus
INTEGER,
atmfVccTransmitTrafficDescriptorType
OBJECT IDENTIFIER,
atmfVccTransmitTrafficDescriptorParam1
INTEGER,
atmfVccTransmitTrafficDescriptorParam2
INTEGER,
atmfVccTransmitTrafficDescriptorParam3
INTEGER,
atmfVccTransmitTrafficDescriptorParam4
INTEGER,
atmfVccTransmitTrafficDescriptorParam5
INTEGER,
atmfVccReceiveTrafficDescriptorType
OBJECT IDENTIFIER,
atmfVccReceiveTrafficDescriptorParam1
INTEGER,
atmfVccReceiveTrafficDescriptorParam2
INTEGER,
atmfVccReceiveTrafficDescriptorParam3
INTEGER,
atmfVccReceiveTrafficDescriptorParam4
INTEGER,
atmfVccReceiveTrafficDescriptorParam5
INTEGER,
atmfVccQoSCategory
INTEGER,
atmfVccTransmitQoSClass
INTEGER,
atmfVccReceiveQoSClass
INTEGER
}
atmfVccPortIndex OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The unique value which identifies the UNI port. The value of 0 has the
special meaning of identifying the local UNI."
::= { atmfVccEntry 1 }
atmfVccVpi OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VPI value of this Virtual Channel Connection at the local UNI."
::= { atmfVccEntry 2 }
atmfVccVci OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The VCI value of this Virtual Channel Connection at the local UNI."
::= { atmfVccEntry 3 }
atmfVccOperStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
end2endUp(2),
end2endDown(3),
localUpEnd2endUnknown(4),
localDown(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The present actual operational status of the VCC. A value of end2endUp(2)
or end2endUp(3) is used if the end to end status is known.
If only local status is known a value of localUpEnd2endUnknown(4) or
localDown(5) is used."
::= { atmfVccEntry 4 }
atmfVccTransmitTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic management, applicable to the transmit direction of
this VCC. The type may indicate none, or a type with one or more parameters.
These parameters are specified as a parameter vector, in the corresponding
instances of the objects:
atmfVccTransmitTrafficDescriptorParam1,
atmfVccTransmitTrafficDescriptorParam2,
atmfVccTransmitTrafficDescriptorParam3,
atmfVccTransmitTrafficDescriptorParam4, and
atmfVccTransmitTrafficDescriptorParam5."
::= { atmfVccEntry 5 }
atmfVccTransmitTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first parameter of the transmit parameter vector for this VCC, used
according to the value of atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 6 }
atmfVccTransmitTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second parameter of the transmit parameter vector for this VCC, used
according to the value of atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 7 }
atmfVccTransmitTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third parameter of the transmit parameter vector for this VCC, used
according to the value of atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 8 }
atmfVccTransmitTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth parameter of the transmit parameter vector for this VCC, used
according to the value of atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 9 }
atmfVccTransmitTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth parameter of the transmit parameter vector for this VCC, used
according to the value of atmfVccTransmitTrafficDescriptorType."
::= { atmfVccEntry 10 }
atmfVccReceiveTrafficDescriptorType OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The type of traffic management, applicable to the traffic in the receive
direction of this VCC. The type may indicate none, or a type with one or
more parameters.
These parameters are specified as a parameter vector, in the corresponding
instances of the objects:
atmfVccReceiveTrafficDescriptorParam1,
atmfVccReceiveTrafficDescriptorParam2,
atmfVccReceiveTrafficDescriptorParam3,
atmfVccReceiveTrafficDescriptorParam4, and
atmfVccReceiveTrafficDescriptorParam5."
::= { atmfVccEntry 11 }
atmfVccReceiveTrafficDescriptorParam1 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The first parameter of the receive parameter vector for this VCC, used
according to the value of atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 12 }
atmfVccReceiveTrafficDescriptorParam2 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The second parameter of the receive parameter vector for this VCC, used
according to the value of atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 13 }
atmfVccReceiveTrafficDescriptorParam3 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The third parameter of the receive parameter vector for this VCC, used
according to the value of atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 14 }
atmfVccReceiveTrafficDescriptorParam4 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fourth parameter of the receive parameter vector for this VCC, used
according to the value of atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 15 }
atmfVccReceiveTrafficDescriptorParam5 OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The fifth parameter of the receive parameter vector for this VCC, used
according to the value of atmfVccReceiveTrafficDescriptorType."
::= { atmfVccEntry 16 }
atmfVccQoSCategory OBJECT-TYPE
SYNTAX INTEGER {
other(1),
deterministic (2),
statistical (3),
unspecified (4)
}
ACCESS read-only
STATUS deprecated
DESCRIPTION
"This object should not be implemented except as required for backward
compatibility with version 2.0 of the UNI specification."
::= { atmfVccEntry 17 }
atmfVccTransmitQoSClass OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The QoS Class, as defined in section 4 of Appendix A, for the transmit
direction of this VCC connection at the local UNI."
::= { atmfVccEntry 18 }
atmfVccReceiveQoSClass OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The QoS Class, as defined in section 4 of Appendix A, for the receive
direction of this VCC connection at the local UNI."
::= { atmfVccEntry 19 }
------------------------------------------------------------------------
-- The Network Prefix Table
--
-- The Network Prefix Table is implemented by the UNI Management
-- Entity on the user-side of the UNI
atmfNetPrefixTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfNetPrefixEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table implemented by the UNI Management Entity on the user-side of an
ATM UNI port, containing the network-prefix(es) for ATM-layer addresses
in effect on the user-side of the UNI."
::= { atmfNetPrefixGroup 1 }
atmfNetPrefixEntry OBJECT-TYPE
SYNTAX AtmfNetPrefixEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single network-prefix for ATM-layer addresses in
effect on the user-side of a UNI port. Note that the index variable
atmfNetPrefixPrefix is a variable-length string, and as such the rule
for variable-length strings in section 4.1.6 of RFC 1212 applies."
INDEX { atmfNetPrefixPort, atmfNetPrefixPrefix }
::= { atmfNetPrefixTable 1 }
AtmfNetPrefixEntry ::=
SEQUENCE {
atmfNetPrefixPort INTEGER,
atmfNetPrefixPrefix NetPrefix,
atmfNetPrefixStatus INTEGER
}
atmfNetPrefixPort OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value which identifies the UNI port for which the network
prefix for ATM addresses is in effect. The value of 0 has the special
meaning of identifying the local UNI."
::= { atmfNetPrefixEntry 1 }
atmfNetPrefixPrefix OBJECT-TYPE
SYNTAX NetPrefix
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The network prefix for ATM addresses which is in effect on the
user-side of the ATM UNI port."
::= { atmfNetPrefixEntry 2 }
atmfNetPrefixStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An indication of the validity of the network prefix for ATM addresses
on the user-side of the UNI port. To configure a new network prefix in
this table, the network-side must set the appropriate instance of this
object to the value valid(1).
To delete an existing network prefix in this table, the network-side
must set the appropriate instance of this object to the value invalid(2).
If circumstances occur on the user-side which cause a prefix to become
invalid, the user-side modifies the value of the appropriate instance of
this object to invalid(2).
Whenever the value of this object for a particular prefix becomes invalid(2),
the conceptual row for that prefix may be removed from the table at anytime,
either immediately or subsequently."
::= { atmfNetPrefixEntry 3 }
------------------------------------------------------------------------
-- The Address Table
--
-- The Address Table is implemented by the UNI Management Entity
-- on the network-side of the UNI
atmfAddressTable OBJECT-TYPE
SYNTAX SEQUENCE OF AtmfAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table implemented by the network-side of an ATM UNI port, containing the
ATM-layer addresses in effect on the user-side of the UNI."
::= { atmfAddressGroup 1 }
atmfAddressEntry OBJECT-TYPE
SYNTAX AtmfAddressEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a single ATM-layer address in effect on the user-side
of a UNI port. Note that the index variable atmfAddressAtmAddress is a
variable-length string, and as such the rule for variable-length strings
in section 4.1.6 of RFC 1212 applies."
INDEX { atmfAddressPort, atmfAddressAtmAddress }
::= { atmfAddressTable 1 }
AtmfAddressEntry ::=
SEQUENCE {
atmfAddressPort INTEGER,
atmfAddressAtmAddress AtmAddress2,
atmfAddressStatus INTEGER
}
atmfAddressPort OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A unique value which identifies the UNI port for which the ATM address is
in effect. The value of 0 has the special meaning of identifying the local
UNI."
::= { atmfAddressEntry 1 }
atmfAddressAtmAddress OBJECT-TYPE
SYNTAX AtmAddress2
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The ATM address which is in effect on the user-side of the ATM UNI port."
::= { atmfAddressEntry 2 }
atmfAddressStatus OBJECT-TYPE
SYNTAX INTEGER {
valid(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"An indication of the validity of the ATM address at the user-side of
the UNI port. To configure a new address in this table, the user-side
must set the appropriate instance of this object to the value valid(1).
To delete an existing address in this able, the user-side must set the
appropriate instance of this object to the value invalid(2).
If circumstances occur on the network-side which cause an address to
become invalid, the network-side modifies the value of the appropriate
instance of this object to invalid(2).
Whenever the value of this object for a particular address becomes
invalid(2), the conceptual row for that address may be removed from the
table at anytime, either immediately or subsequently."
::= { atmfAddressEntry 3 }
END