1258 lines
38 KiB
Plaintext
1258 lines
38 KiB
Plaintext
ATM-FORUM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
DisplayString FROM RFC1213-MIB
|
|
enterprises, Counter, IpAddress FROM RFC1155-SMI
|
|
OBJECT-TYPE FROM RFC-1212;
|
|
|
|
--atmForum MODULE-IDENTITY
|
|
-- LAST-UPDATED "200003010000Z"
|
|
-- ORGANIZATION "Juniper Networks, Inc."
|
|
-- CONTACT-INFO
|
|
-- " Ramana Gadagottu
|
|
-- Juniper Networks, Inc.
|
|
-- 385 Ravendale Drive
|
|
-- Mountain View, CA 94043
|
|
-- E-mail: ramana@juniper.net"
|
|
--
|
|
-- DESCRIPTION
|
|
-- "The MIB modules representing Juniper Networks'
|
|
-- implementation of ILMI MIBs
|
|
-- supported by a single SNMP agent."
|
|
-- ::= { enterprises 353 }
|
|
|
|
atmForum OBJECT IDENTIFIER ::= { enterprises 353 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- a subtree for defining administrative
|
|
-- object identifiers
|
|
atmForumAdmin OBJECT IDENTIFIER ::= { atmForum 1 }
|
|
|
|
-- a subtree for defining UNI MIB object types
|
|
atmForumUni OBJECT IDENTIFIER ::= { atmForum 2 }
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- Textual Conventions
|
|
|
|
-- All representations of ATM addresses in this MIB Module use
|
|
-- the data type:
|
|
|
|
AtmAddress ::= OCTET STRING (SIZE (0 .. 32))
|
|
|
|
-- Note this data type is used only by the deprecated object
|
|
-- atmfPortAddress. Another definition (a refined one) is
|
|
-- specified in the separate MIB for Address Registration.
|
|
|
|
-- Representations in this MIB Module of an ATM address
|
|
-- use the data type:
|
|
|
|
AtmAddress2 ::= OCTET STRING (SIZE (8 | 20))
|
|
|
|
-- Representations in this MIB Module of a network-prefix
|
|
-- for an ATM address use the data type:
|
|
|
|
NetPrefix ::= OCTET STRING (SIZE (8 | 13))
|
|
|
|
-- in both the AtmAddress2 and NetPrefix conventions, non-NSAP-encoded E.164
|
|
-- addresses are represented as 8 octets using the format specified in
|
|
-- section 5.1.3.1.4.
|
|
-- In contrast, an NSAP-encoded address is 20 octets, and an
|
|
-- NSAP-encoded network
|
|
-- prefix is 13 octets long.
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- Object Identifier definitions
|
|
|
|
-- The following values are defined for use as possible values
|
|
-- of the atmfPortTransmissionType object.
|
|
|
|
atmfTransmissionTypes OBJECT IDENTIFIER ::= { atmForumAdmin 2 }
|
|
|
|
-- unknown transmission type
|
|
atmfUnknownType
|
|
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 1}
|
|
|
|
-- Sonet STS-3c physical layer at 155.52 Mbps
|
|
atmfSonetSTS3c
|
|
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 2 }
|
|
|
|
-- DS3 physical layer at 44.736 Mbps
|
|
atmfDs3
|
|
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 3 }
|
|
|
|
-- 4B/5B encoding physical layer at 100 Mbps
|
|
atmf4B5B
|
|
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 4 }
|
|
|
|
-- 8B/10B encoding physical layer at 155.52 Mbps
|
|
atmf8B10B
|
|
OBJECT IDENTIFIER ::= { atmfTransmissionTypes 5 }
|
|
|
|
|
|
-- The following values are defined for use as possible values
|
|
-- of the atmfPortMediaType object.
|
|
|
|
atmfMediaTypes OBJECT IDENTIFIER ::= { atmForumAdmin 3 }
|
|
|
|
-- unknown media type
|
|
atmfMediaUnknownType
|
|
OBJECT IDENTIFIER ::= { atmfMediaTypes 1 }
|
|
|
|
-- Coaxial cable
|
|
atmfMediaCoaxCable
|
|
OBJECT IDENTIFIER ::= { atmfMediaTypes 2 }
|
|
|
|
-- Single Mode fiber
|
|
atmfMediaSingleMode
|
|
OBJECT IDENTIFIER ::= { atmfMediaTypes 3 }
|
|
|
|
-- Multi Mode fiber
|
|
atmfMediaMultiMode
|
|
OBJECT IDENTIFIER ::= { atmfMediaTypes 4 }
|
|
|
|
-- Shielded Twisted Pair
|
|
atmfMediaStp
|
|
OBJECT IDENTIFIER ::= { atmfMediaTypes 5 }
|
|
|
|
-- Unshielded Twisted Pair
|
|
atmfMediaUtp
|
|
OBJECT IDENTIFIER ::= { atmfMediaTypes 6 }
|
|
|
|
|
|
-- The following values are defined for use as possible values
|
|
-- of the atmfVpcTransmitTrafficDescriptorType,
|
|
-- atmfVpcReceiveTrafficDescriptorType,
|
|
-- atmfVccTransmitTrafficDescriptorType and
|
|
-- atmfVccReceiveTrafficDescriptorType objects.
|
|
|
|
atmfTrafficDescrTypes OBJECT IDENTIFIER ::= { atmForumAdmin 4 }
|
|
|
|
-- The "None" Traffic Descriptor Type
|
|
atmfNoDescriptor
|
|
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 1 }
|
|
|
|
--
|
|
atmfPeakRate
|
|
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 2 }
|
|
-- This type is no longer used
|
|
|
|
--
|
|
-- The No CLP/No SCR Type
|
|
atmfNoClpNoScr
|
|
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 3 }
|
|
-- The use of the parameter vector for this type:
|
|
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
|
|
-- Parameters #2, #3, #4 and #5 are unused
|
|
|
|
--
|
|
-- The CLP without Tagging/No SCR Type
|
|
atmfClpNoTaggingNoScr
|
|
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 4 }
|
|
-- The use of the parameter vector for this type:
|
|
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
|
|
-- Parameter #2 - peak cell rate in cells/second for CLP=0 traffic
|
|
-- Parameters #3, #4 and #5 are unused
|
|
|
|
--
|
|
-- The CLP with Tagging/No SCR Type
|
|
atmfClpTaggingNoScr
|
|
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 5 }
|
|
-- The use of the parameter vector for this type:
|
|
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
|
|
-- Parameter #2 - peak cell rate in cells/second for
|
|
-- CLP=0 traffic, excess tagged as CLP=1
|
|
-- Parameters #3, #4 and #5 are unused
|
|
|
|
--
|
|
-- The SCR/No CLP Type
|
|
atmfNoClpScr
|
|
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 6 }
|
|
-- The use of the parameter vector for this type:
|
|
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
|
|
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0+1 traffic
|
|
-- Parameter #3 - maximum burst size in cells
|
|
-- Parameters #4 and #5 are unused
|
|
|
|
--
|
|
-- The CLP without Tagging/SCR Type
|
|
atmfClpNoTaggingScr
|
|
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 7 }
|
|
-- The use of the parameter vector for this type:
|
|
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
|
|
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0 traffic
|
|
-- Parameter #3 - maximum burst size in cells
|
|
-- Parameters #4 and #5 are unused
|
|
|
|
--
|
|
-- The CLP with Tagging/SCR Type
|
|
atmfClpTaggingScr
|
|
OBJECT IDENTIFIER ::= { atmfTrafficDescrTypes 8 }
|
|
-- The use of the parameter vector for this type:
|
|
-- Parameter #1 - peak cell rate in cells/second for CLP=0+1 traffic
|
|
-- Parameter #2 - sustainable cell rate in cells/second for CLP=0
|
|
-- traffic, excess tagged as CLP=1
|
|
-- Parameter #3 - maximum burst size in cells
|
|
-- Parameters #4 and #5 are unused
|
|
|
|
------------------------------------------------------------------------
|
|
-- The MIB groups
|
|
atmfPhysicalGroup OBJECT IDENTIFIER ::= { atmForumUni 1 }
|
|
atmfAtmLayerGroup OBJECT IDENTIFIER ::= { atmForumUni 2 }
|
|
atmfAtmStatsGroup OBJECT IDENTIFIER ::= { atmForumUni 3 }
|
|
atmfVpcGroup OBJECT IDENTIFIER ::= { atmForumUni 4 }
|
|
atmfVccGroup OBJECT IDENTIFIER ::= { atmForumUni 5 }
|
|
|
|
-- New MIB Groups
|
|
|
|
atmfAddressGroup OBJECT IDENTIFIER ::= { atmForumUni 6 }
|
|
atmfNetPrefixGroup OBJECT IDENTIFIER ::= { atmForumUni 7 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- The Physical Port Group
|
|
-- This group is mandatory for all UNI devices.
|
|
--
|
|
-- The Physical Port Table
|
|
|
|
atmfPortTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmfPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of physical layer status and parameter information for the
|
|
UNI's physical interface."
|
|
::= { atmfPhysicalGroup 1 }
|
|
|
|
atmfPortEntry OBJECT-TYPE
|
|
SYNTAX AtmfPortEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information about the physical layer
|
|
of a UNI interface."
|
|
INDEX { atmfPortIndex }
|
|
::= { atmfPortTable 1 }
|
|
|
|
AtmfPortEntry ::=
|
|
SEQUENCE {
|
|
atmfPortIndex
|
|
INTEGER,
|
|
atmfPortAddress
|
|
AtmAddress,
|
|
atmfPortTransmissionType
|
|
OBJECT IDENTIFIER,
|
|
atmfPortMediaType
|
|
OBJECT IDENTIFIER,
|
|
atmfPortOperStatus
|
|
INTEGER,
|
|
atmfPortSpecific
|
|
OBJECT IDENTIFIER,
|
|
atmfPortMyIfName
|
|
DisplayString
|
|
}
|
|
|
|
atmfPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value which identifies this port. The value of 0 has the
|
|
special meaning of identifying the local UNI."
|
|
::= { atmfPortEntry 1 }
|
|
|
|
atmfPortAddress OBJECT-TYPE
|
|
SYNTAX AtmAddress
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object should not be implemented except as required for backward
|
|
compatibility with version 2.0 of the UNI specification. The Address Group,
|
|
defined as part of the separate Address Registration MIB should be used
|
|
instead."
|
|
::= { atmfPortEntry 2 }
|
|
|
|
atmfPortTransmissionType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The transmission type of this port. For example, for a port using the
|
|
Sonet STS-3c physical layer at 155.52 Mbs, this object would have the
|
|
Object Identifier value: atmfSonetSTS3c."
|
|
::= { atmfPortEntry 3 }
|
|
|
|
atmfPortMediaType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of media being used on this port. For example, for a port using
|
|
coaxial cable, this object would have the Object Identifier value:
|
|
atmfMediaCoaxCable."
|
|
::= { atmfPortEntry 4 }
|
|
|
|
atmfPortOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
inService(2),
|
|
outOfService(3),
|
|
loopBack(4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The operational (i.e., actual) state of this port.
|
|
The ILMI should not alarm on a physical interface for when the value of this
|
|
object is outOfService(3). This capability is useful if equipment is to be
|
|
disconnected, or for troubleshooting purposes.
|
|
A value of loopBack(4) indicates that a local loopback is in place. "
|
|
::= { atmfPortEntry 5 }
|
|
|
|
atmfPortSpecific OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object 'points' to additional transmission and/or media specific
|
|
information relating to this port. In particular, this object's value
|
|
is the name of a specific instance of the first columnar object of a MIB
|
|
table with such additional information, where the specific instance is the
|
|
one which corresponds to this port.
|
|
For example, for a DS3 interface, this object would contain the value, as
|
|
defined in RFC 1407:
|
|
dsx3LineIndex.i
|
|
where i would be the integer value uniquely identifying the DS3 interface
|
|
corresponding to this port. If no additional transmission and/or media
|
|
specific information is available, this object has the value { 0 0 }."
|
|
::= { atmfPortEntry 6 }
|
|
|
|
atmfPortMyIfName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A textual name of this interface. If this systme is manageable through
|
|
SNMP, and supports the object ifName, the value of this object must be
|
|
identical with that of ifName for the ifEntry of the lowest level physical
|
|
interface for this port. This interface must be uniquely names on this system
|
|
to distinguish parallel links with a neighboring system. If this interface
|
|
does not have a textual name, the value of this object is a zero length
|
|
string."
|
|
::= { atmfPortEntry 7 }
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
|
|
-- Note: Typical UME will support only one of the following two objects
|
|
|
|
atmfMyIpNmAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An IP Address to which a Network Management Station can send Network
|
|
Management protocol, e.g. SNMP messages to UDP port 161, in order to
|
|
access network management information concerning the operation of the
|
|
ATM devide local to this UME."
|
|
::= { atmfPhysicalGroup 2 }
|
|
|
|
-- atmfMyOsiNmNsapAddress OBJECT-TYPE
|
|
-- SYNTAX NsapAddress
|
|
-- ACCESS read-only
|
|
-- STATUS mandatory
|
|
-- DESCRIPTION
|
|
-- "An NSAP Address to which a Network Management Station can send Network
|
|
-- Management protocol messages in order to access network management
|
|
-- information concerning the operation of the ATM devide local to this UME."
|
|
-- ::= { atmfPhysicalGroup 3 }
|
|
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- The ATM Layer Group
|
|
-- This group is mandatory for all UNI devices.
|
|
--
|
|
-- ATM-layer specific information for the UNI interface
|
|
|
|
atmfAtmLayerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmfAtmLayerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of ATM layer status and parameter information for the UNI's
|
|
physical interface."
|
|
::= { atmfAtmLayerGroup 1 }
|
|
|
|
atmfAtmLayerEntry OBJECT-TYPE
|
|
SYNTAX AtmfAtmLayerEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information about the ATM layer of a UNI
|
|
interface."
|
|
INDEX { atmfAtmLayerIndex }
|
|
::= { atmfAtmLayerTable 1 }
|
|
|
|
AtmfAtmLayerEntry ::=
|
|
SEQUENCE {
|
|
atmfAtmLayerIndex
|
|
INTEGER,
|
|
atmfAtmLayerMaxVPCs
|
|
INTEGER,
|
|
atmfAtmLayerMaxVCCs
|
|
INTEGER,
|
|
atmfAtmLayerConfiguredVPCs
|
|
INTEGER,
|
|
atmfAtmLayerConfiguredVCCs
|
|
INTEGER,
|
|
atmfAtmLayerMaxVpiBits
|
|
INTEGER,
|
|
atmfAtmLayerMaxVciBits
|
|
INTEGER,
|
|
atmfAtmLayerUniType
|
|
INTEGER,
|
|
atmfAtmLayerUniVersion
|
|
INTEGER
|
|
}
|
|
|
|
atmfAtmLayerIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value which identifies the UNI port. The value of 0 has the
|
|
special meaning of identifying the local UNI."
|
|
::= { atmfAtmLayerEntry 1 }
|
|
|
|
atmfAtmLayerMaxVPCs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of switched and permanent VPCs supported on this UNI."
|
|
::= { atmfAtmLayerEntry 2 }
|
|
|
|
atmfAtmLayerMaxVCCs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The maximum number of switched and permanent VCCs supported on this UNI."
|
|
::= { atmfAtmLayerEntry 3 }
|
|
|
|
atmfAtmLayerConfiguredVPCs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of permanent VPCs configured for use on this UNI."
|
|
::= { atmfAtmLayerEntry 4 }
|
|
|
|
atmfAtmLayerConfiguredVCCs OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16777215)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of permanent VCCs configured for use on this UNI."
|
|
::= { atmfAtmLayerEntry 5 }
|
|
|
|
atmfAtmLayerMaxVpiBits OBJECT-TYPE
|
|
SYNTAX INTEGER (0..8)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of active VPI bits on this interface."
|
|
::= {atmfAtmLayerEntry 6 }
|
|
|
|
atmfAtmLayerMaxVciBits OBJECT-TYPE
|
|
SYNTAX INTEGER (0..16)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of active VCI bits on this interface."
|
|
::= {atmfAtmLayerEntry 7 }
|
|
|
|
atmfAtmLayerUniType OBJECT-TYPE
|
|
SYNTAX INTEGER {public(1), private(2)}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of the ATM UNI, either public or private."
|
|
::= { atmfAtmLayerEntry 8 }
|
|
|
|
atmfAtmLayerUniVersion OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
version2point0(1),
|
|
version3point0(2),
|
|
version3point1(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An indication of the latest version of the ATM Forum UNI Specification
|
|
that is supported on this UNI. If this value is not present, a version
|
|
of the UNI earlier than 3.1 is supported. If a value greated than
|
|
version3point1 is persent, then UNI 3.1 communication should be attempt.
|
|
|
|
If the peer UNE's value of this object is the same as, or later than the
|
|
local UME's value, then the version corresponding to the local UME's
|
|
value should be attempted. Otherwise, if the peer UME's value of this
|
|
object is earlier, and supported locally, then the local UME should attempt
|
|
the version corresponding to the peer UME's value. Otherwise, compatability
|
|
of the two UMEs cannot be assumed."
|
|
::= { atmfAtmLayerEntry 9 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- The ATM Statistics Group
|
|
-- This group is optional. However, if any objects in this group
|
|
-- are supported, then all objects in the group must be supported.
|
|
--
|
|
-- ATM-layer statistics for the UNI interface
|
|
|
|
atmfAtmStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmfAtmStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of ATM layer statistics information for
|
|
the UNI's physical interface."
|
|
::= { atmfAtmStatsGroup 1 }
|
|
|
|
atmfAtmStatsEntry OBJECT-TYPE
|
|
SYNTAX AtmfAtmStatsEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing statistics for the ATM layer of a
|
|
UNI interface."
|
|
INDEX { atmfAtmStatsIndex }
|
|
::= { atmfAtmStatsTable 1 }
|
|
|
|
AtmfAtmStatsEntry ::=
|
|
SEQUENCE {
|
|
atmfAtmStatsIndex
|
|
INTEGER,
|
|
atmfAtmStatsReceivedCells
|
|
Counter,
|
|
atmfAtmStatsDroppedReceivedCells
|
|
Counter,
|
|
atmfAtmStatsTransmittedCells
|
|
Counter
|
|
}
|
|
atmfAtmStatsIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value which identifies the UNI port. The value of 0 has the
|
|
special meaning of identifying the local UNI."
|
|
::= { atmfAtmStatsEntry 1 }
|
|
|
|
atmfAtmStatsReceivedCells OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The accumulated number of ATM cells received on this UNI which were
|
|
assigned and not dropped."
|
|
::= { atmfAtmStatsEntry 2 }
|
|
|
|
atmfAtmStatsDroppedReceivedCells OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The accumulated number of ATM cells which were dropped for the reasons
|
|
defined in section 4.4.4.2."
|
|
::= { atmfAtmStatsEntry 3 }
|
|
|
|
atmfAtmStatsTransmittedCells OBJECT-TYPE
|
|
SYNTAX Counter
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The accumulated number of assigned ATM cells which were transmitted across
|
|
this interface."
|
|
::= { atmfAtmStatsEntry 4 }
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- The Virtual Path Group
|
|
-- This group is mandatory for all UNI devices.
|
|
--
|
|
-- Information concerning Virtual Path Connections
|
|
|
|
atmfVpcTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmfVpcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of status and parameter information on the virtual path connections
|
|
which cross this UNI. These is one entry in this table for each permanent
|
|
virtual path connection."
|
|
::= { atmfVpcGroup 1 }
|
|
|
|
atmfVpcEntry OBJECT-TYPE
|
|
SYNTAX AtmfVpcEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information about a particular virtual path
|
|
connection."
|
|
INDEX { atmfVpcPortIndex, atmfVpcVpi }
|
|
::= { atmfVpcTable 1 }
|
|
|
|
AtmfVpcEntry ::=
|
|
SEQUENCE {
|
|
atmfVpcPortIndex
|
|
INTEGER,
|
|
atmfVpcVpi
|
|
INTEGER,
|
|
atmfVpcOperStatus
|
|
INTEGER,
|
|
atmfVpcTransmitTrafficDescriptorType
|
|
OBJECT IDENTIFIER,
|
|
atmfVpcTransmitTrafficDescriptorParam1
|
|
INTEGER,
|
|
atmfVpcTransmitTrafficDescriptorParam2
|
|
INTEGER,
|
|
atmfVpcTransmitTrafficDescriptorParam3
|
|
INTEGER,
|
|
atmfVpcTransmitTrafficDescriptorParam4
|
|
INTEGER,
|
|
atmfVpcTransmitTrafficDescriptorParam5
|
|
INTEGER,
|
|
atmfVpcReceiveTrafficDescriptorType
|
|
OBJECT IDENTIFIER,
|
|
atmfVpcReceiveTrafficDescriptorParam1
|
|
INTEGER,
|
|
atmfVpcReceiveTrafficDescriptorParam2
|
|
INTEGER,
|
|
atmfVpcReceiveTrafficDescriptorParam3
|
|
INTEGER,
|
|
atmfVpcReceiveTrafficDescriptorParam4
|
|
INTEGER,
|
|
atmfVpcReceiveTrafficDescriptorParam5
|
|
INTEGER,
|
|
atmfVpcQoSCategory
|
|
INTEGER,
|
|
atmfVpcTransmitQoSClass
|
|
INTEGER,
|
|
atmfVpcReceiveQoSClass
|
|
INTEGER
|
|
}
|
|
|
|
atmfVpcPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value which identifies the UNI port. The value of 0 has the
|
|
special meaning of identifying the local UNI."
|
|
::= { atmfVpcEntry 1 }
|
|
|
|
atmfVpcVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VPI value of this Virtual Path Connection at the local UNI."
|
|
::= { atmfVpcEntry 2 }
|
|
|
|
atmfVpcOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
end2endUp(2),
|
|
end2endDown(3),
|
|
localUpEnd2endUnknown(4),
|
|
localDown(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The present actual operational status of the VPC.
|
|
|
|
A value of end2endUp(2) or end2endDown(3) would be used if the end-to-end
|
|
status is known. If only local status information is available, a value of
|
|
localUpEnd2endUnknown(4) or localDown(5) would be used."
|
|
::= { atmfVpcEntry 3 }
|
|
|
|
atmfVpcTransmitTrafficDescriptorType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of traffic management, applicable to the transmit direction of
|
|
this VPC. The type may indicate none, or a type with one or more parameters.
|
|
These parameters are specified as a parameter vector, in the corresponding
|
|
instances of the objects:
|
|
atmfVpcTransmitTrafficDescriptorParam1,
|
|
atmfVpcTransmitTrafficDescriptorParam2,
|
|
atmfVpcTransmitTrafficDescriptorParam3,
|
|
atmfVpcTransmitTrafficDescriptorParam4, and
|
|
atmfVpcTransmitTrafficDescriptorParam5."
|
|
::= { atmfVpcEntry 4 }
|
|
|
|
atmfVpcTransmitTrafficDescriptorParam1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The first parameter of the transmit parameter vector for this VPC, used
|
|
according to the value of atmfVpcTransmitTrafficDescriptorType."
|
|
::= { atmfVpcEntry 5 }
|
|
|
|
atmfVpcTransmitTrafficDescriptorParam2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The second parameter of the transmit parameter vector for this VPC, used
|
|
according to the value of atmfVpcTransmitTrafficDescriptorType."
|
|
::= { atmfVpcEntry 6 }
|
|
|
|
atmfVpcTransmitTrafficDescriptorParam3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The third parameter of the transmit parameter vector for this VPC, used
|
|
according to the value of atmfVpcTransmitTrafficDescriptorType."
|
|
::= { atmfVpcEntry 7 }
|
|
|
|
atmfVpcTransmitTrafficDescriptorParam4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fourth parameter of the transmit parameter vector for this VPC, used
|
|
according to the value of atmfVpcTransmitTrafficDescriptorType."
|
|
::= { atmfVpcEntry 8 }
|
|
|
|
atmfVpcTransmitTrafficDescriptorParam5 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fifth parameter of the transmit parameter vector for this VPC, used
|
|
according to the value of atmfVpcTransmitTrafficDescriptorType."
|
|
::= { atmfVpcEntry 9 }
|
|
|
|
atmfVpcReceiveTrafficDescriptorType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of traffic management, applicable to the traffic in the receive
|
|
direction of this VPC. The type may indicate none, or a type with one or
|
|
more parameters. These parameters are specified as a parameter vector, in
|
|
the corresponding instances of the objects:
|
|
atmfVpcReceiveTrafficDescriptorParam1,
|
|
atmfVpcReceiveTrafficDescriptorParam2,
|
|
atmfVpcReceiveTrafficDescriptorParam3,
|
|
atmfVpcReceiveTrafficDescriptorParam4, and
|
|
atmfVpcReceiveTrafficDescriptorParam5."
|
|
::= { atmfVpcEntry 10 }
|
|
|
|
atmfVpcReceiveTrafficDescriptorParam1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The first parameter of the receive parameter vector for this VPC, used
|
|
according to the value of atmfVpcReceiveTrafficDescriptorType."
|
|
::= { atmfVpcEntry 11 }
|
|
|
|
atmfVpcReceiveTrafficDescriptorParam2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The second parameter of the receive parameter vector for this VPC, used
|
|
according to the value of atmfVpcReceiveTrafficDescriptorType."
|
|
::= { atmfVpcEntry 12 }
|
|
|
|
atmfVpcReceiveTrafficDescriptorParam3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The third parameter of the receive parameter vector for this VPC, used
|
|
according to the value of atmfVpcReceiveTrafficDescriptorType."
|
|
::= { atmfVpcEntry 13 }
|
|
|
|
atmfVpcReceiveTrafficDescriptorParam4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fourth parameter of the receive parameter vector for this VPC, used
|
|
according to the value of atmfVpcReceiveTrafficDescriptorType."
|
|
::= { atmfVpcEntry 14 }
|
|
|
|
atmfVpcReceiveTrafficDescriptorParam5 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fifth parameter of the receive parameter vector for this VPC, used
|
|
according to the value of atmfVpcReceiveTrafficDescriptorType."
|
|
::= { atmfVpcEntry 15 }
|
|
|
|
atmfVpcQoSCategory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
deterministic (2),
|
|
statistical (3),
|
|
unspecified (4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object should not be implemented except as required for backward
|
|
compatibility with version 2.0 of the UNI specification."
|
|
::= { atmfVpcEntry 16 }
|
|
|
|
atmfVpcTransmitQoSClass OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The QoS Class, as defined in section 4 of Appendix A, for the transmit
|
|
direction of this VPC connection at the local UNI."
|
|
::= { atmfVpcEntry 17 }
|
|
|
|
atmfVpcReceiveQoSClass OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The QoS Class, as defined in section 4 of Appendix A, for the receive
|
|
direction of this VPC connection at the local UNI."
|
|
::= { atmfVpcEntry 18 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- The Virtual Channel Group
|
|
-- This group is mandatory for all UNI devices.
|
|
--
|
|
-- Information concerning Virtual Channel Connections
|
|
|
|
atmfVccTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmfVccEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of status and parameter information on the virtual channel
|
|
connections which are visible at this UNI. There is one entry in this
|
|
table for each permanent virtual channel connection, including reserved
|
|
VCC that are supported: e.g., signalling, OAM flows, and ILMI, but not
|
|
unassigned cells."
|
|
::= { atmfVccGroup 1 }
|
|
|
|
atmfVccEntry OBJECT-TYPE
|
|
SYNTAX AtmfVccEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry in the table, containing information about a particular virtual
|
|
channel connection."
|
|
INDEX { atmfVccPortIndex, atmfVccVpi, atmfVccVci }
|
|
::= { atmfVccTable 1 }
|
|
|
|
AtmfVccEntry ::=
|
|
SEQUENCE {
|
|
atmfVccPortIndex
|
|
INTEGER,
|
|
atmfVccVpi
|
|
INTEGER,
|
|
atmfVccVci
|
|
INTEGER,
|
|
atmfVccOperStatus
|
|
INTEGER,
|
|
atmfVccTransmitTrafficDescriptorType
|
|
OBJECT IDENTIFIER,
|
|
atmfVccTransmitTrafficDescriptorParam1
|
|
INTEGER,
|
|
atmfVccTransmitTrafficDescriptorParam2
|
|
INTEGER,
|
|
atmfVccTransmitTrafficDescriptorParam3
|
|
INTEGER,
|
|
atmfVccTransmitTrafficDescriptorParam4
|
|
INTEGER,
|
|
atmfVccTransmitTrafficDescriptorParam5
|
|
INTEGER,
|
|
atmfVccReceiveTrafficDescriptorType
|
|
OBJECT IDENTIFIER,
|
|
atmfVccReceiveTrafficDescriptorParam1
|
|
INTEGER,
|
|
atmfVccReceiveTrafficDescriptorParam2
|
|
INTEGER,
|
|
atmfVccReceiveTrafficDescriptorParam3
|
|
INTEGER,
|
|
atmfVccReceiveTrafficDescriptorParam4
|
|
INTEGER,
|
|
atmfVccReceiveTrafficDescriptorParam5
|
|
INTEGER,
|
|
atmfVccQoSCategory
|
|
INTEGER,
|
|
atmfVccTransmitQoSClass
|
|
INTEGER,
|
|
atmfVccReceiveQoSClass
|
|
INTEGER
|
|
}
|
|
|
|
atmfVccPortIndex OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The unique value which identifies the UNI port. The value of 0 has the
|
|
special meaning of identifying the local UNI."
|
|
::= { atmfVccEntry 1 }
|
|
|
|
atmfVccVpi OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VPI value of this Virtual Channel Connection at the local UNI."
|
|
::= { atmfVccEntry 2 }
|
|
|
|
atmfVccVci OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The VCI value of this Virtual Channel Connection at the local UNI."
|
|
::= { atmfVccEntry 3 }
|
|
|
|
atmfVccOperStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(1),
|
|
end2endUp(2),
|
|
end2endDown(3),
|
|
localUpEnd2endUnknown(4),
|
|
localDown(5)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The present actual operational status of the VCC. A value of end2endUp(2)
|
|
or end2endUp(3) is used if the end to end status is known.
|
|
|
|
If only local status is known a value of localUpEnd2endUnknown(4) or
|
|
localDown(5) is used."
|
|
::= { atmfVccEntry 4 }
|
|
|
|
atmfVccTransmitTrafficDescriptorType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of traffic management, applicable to the transmit direction of
|
|
this VCC. The type may indicate none, or a type with one or more parameters.
|
|
These parameters are specified as a parameter vector, in the corresponding
|
|
instances of the objects:
|
|
atmfVccTransmitTrafficDescriptorParam1,
|
|
atmfVccTransmitTrafficDescriptorParam2,
|
|
atmfVccTransmitTrafficDescriptorParam3,
|
|
atmfVccTransmitTrafficDescriptorParam4, and
|
|
atmfVccTransmitTrafficDescriptorParam5."
|
|
::= { atmfVccEntry 5 }
|
|
|
|
atmfVccTransmitTrafficDescriptorParam1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The first parameter of the transmit parameter vector for this VCC, used
|
|
according to the value of atmfVccTransmitTrafficDescriptorType."
|
|
::= { atmfVccEntry 6 }
|
|
|
|
atmfVccTransmitTrafficDescriptorParam2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The second parameter of the transmit parameter vector for this VCC, used
|
|
according to the value of atmfVccTransmitTrafficDescriptorType."
|
|
::= { atmfVccEntry 7 }
|
|
|
|
atmfVccTransmitTrafficDescriptorParam3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The third parameter of the transmit parameter vector for this VCC, used
|
|
according to the value of atmfVccTransmitTrafficDescriptorType."
|
|
::= { atmfVccEntry 8 }
|
|
|
|
atmfVccTransmitTrafficDescriptorParam4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fourth parameter of the transmit parameter vector for this VCC, used
|
|
according to the value of atmfVccTransmitTrafficDescriptorType."
|
|
::= { atmfVccEntry 9 }
|
|
|
|
atmfVccTransmitTrafficDescriptorParam5 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fifth parameter of the transmit parameter vector for this VCC, used
|
|
according to the value of atmfVccTransmitTrafficDescriptorType."
|
|
::= { atmfVccEntry 10 }
|
|
|
|
atmfVccReceiveTrafficDescriptorType OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of traffic management, applicable to the traffic in the receive
|
|
direction of this VCC. The type may indicate none, or a type with one or
|
|
more parameters.
|
|
These parameters are specified as a parameter vector, in the corresponding
|
|
instances of the objects:
|
|
atmfVccReceiveTrafficDescriptorParam1,
|
|
atmfVccReceiveTrafficDescriptorParam2,
|
|
atmfVccReceiveTrafficDescriptorParam3,
|
|
atmfVccReceiveTrafficDescriptorParam4, and
|
|
atmfVccReceiveTrafficDescriptorParam5."
|
|
::= { atmfVccEntry 11 }
|
|
|
|
atmfVccReceiveTrafficDescriptorParam1 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The first parameter of the receive parameter vector for this VCC, used
|
|
according to the value of atmfVccReceiveTrafficDescriptorType."
|
|
::= { atmfVccEntry 12 }
|
|
|
|
atmfVccReceiveTrafficDescriptorParam2 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The second parameter of the receive parameter vector for this VCC, used
|
|
according to the value of atmfVccReceiveTrafficDescriptorType."
|
|
::= { atmfVccEntry 13 }
|
|
|
|
atmfVccReceiveTrafficDescriptorParam3 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The third parameter of the receive parameter vector for this VCC, used
|
|
according to the value of atmfVccReceiveTrafficDescriptorType."
|
|
::= { atmfVccEntry 14 }
|
|
|
|
atmfVccReceiveTrafficDescriptorParam4 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fourth parameter of the receive parameter vector for this VCC, used
|
|
according to the value of atmfVccReceiveTrafficDescriptorType."
|
|
::= { atmfVccEntry 15 }
|
|
|
|
atmfVccReceiveTrafficDescriptorParam5 OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The fifth parameter of the receive parameter vector for this VCC, used
|
|
according to the value of atmfVccReceiveTrafficDescriptorType."
|
|
::= { atmfVccEntry 16 }
|
|
|
|
atmfVccQoSCategory OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
other(1),
|
|
deterministic (2),
|
|
statistical (3),
|
|
unspecified (4)
|
|
}
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This object should not be implemented except as required for backward
|
|
compatibility with version 2.0 of the UNI specification."
|
|
::= { atmfVccEntry 17 }
|
|
|
|
atmfVccTransmitQoSClass OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The QoS Class, as defined in section 4 of Appendix A, for the transmit
|
|
direction of this VCC connection at the local UNI."
|
|
::= { atmfVccEntry 18 }
|
|
|
|
atmfVccReceiveQoSClass OBJECT-TYPE
|
|
SYNTAX INTEGER (0..255)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The QoS Class, as defined in section 4 of Appendix A, for the receive
|
|
direction of this VCC connection at the local UNI."
|
|
::= { atmfVccEntry 19 }
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- The Network Prefix Table
|
|
--
|
|
-- The Network Prefix Table is implemented by the UNI Management
|
|
-- Entity on the user-side of the UNI
|
|
|
|
atmfNetPrefixTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmfNetPrefixEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table implemented by the UNI Management Entity on the user-side of an
|
|
ATM UNI port, containing the network-prefix(es) for ATM-layer addresses
|
|
in effect on the user-side of the UNI."
|
|
::= { atmfNetPrefixGroup 1 }
|
|
|
|
atmfNetPrefixEntry OBJECT-TYPE
|
|
SYNTAX AtmfNetPrefixEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information about a single network-prefix for ATM-layer addresses in
|
|
effect on the user-side of a UNI port. Note that the index variable
|
|
atmfNetPrefixPrefix is a variable-length string, and as such the rule
|
|
for variable-length strings in section 4.1.6 of RFC 1212 applies."
|
|
INDEX { atmfNetPrefixPort, atmfNetPrefixPrefix }
|
|
::= { atmfNetPrefixTable 1 }
|
|
|
|
AtmfNetPrefixEntry ::=
|
|
SEQUENCE {
|
|
atmfNetPrefixPort INTEGER,
|
|
atmfNetPrefixPrefix NetPrefix,
|
|
atmfNetPrefixStatus INTEGER
|
|
}
|
|
|
|
atmfNetPrefixPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value which identifies the UNI port for which the network
|
|
prefix for ATM addresses is in effect. The value of 0 has the special
|
|
meaning of identifying the local UNI."
|
|
::= { atmfNetPrefixEntry 1 }
|
|
|
|
atmfNetPrefixPrefix OBJECT-TYPE
|
|
SYNTAX NetPrefix
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The network prefix for ATM addresses which is in effect on the
|
|
user-side of the ATM UNI port."
|
|
::= { atmfNetPrefixEntry 2 }
|
|
|
|
atmfNetPrefixStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An indication of the validity of the network prefix for ATM addresses
|
|
on the user-side of the UNI port. To configure a new network prefix in
|
|
this table, the network-side must set the appropriate instance of this
|
|
object to the value valid(1).
|
|
To delete an existing network prefix in this table, the network-side
|
|
must set the appropriate instance of this object to the value invalid(2).
|
|
|
|
If circumstances occur on the user-side which cause a prefix to become
|
|
invalid, the user-side modifies the value of the appropriate instance of
|
|
this object to invalid(2).
|
|
|
|
Whenever the value of this object for a particular prefix becomes invalid(2),
|
|
the conceptual row for that prefix may be removed from the table at anytime,
|
|
either immediately or subsequently."
|
|
::= { atmfNetPrefixEntry 3 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- The Address Table
|
|
--
|
|
-- The Address Table is implemented by the UNI Management Entity
|
|
-- on the network-side of the UNI
|
|
|
|
atmfAddressTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AtmfAddressEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table implemented by the network-side of an ATM UNI port, containing the
|
|
ATM-layer addresses in effect on the user-side of the UNI."
|
|
::= { atmfAddressGroup 1 }
|
|
|
|
atmfAddressEntry OBJECT-TYPE
|
|
SYNTAX AtmfAddressEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Information about a single ATM-layer address in effect on the user-side
|
|
of a UNI port. Note that the index variable atmfAddressAtmAddress is a
|
|
variable-length string, and as such the rule for variable-length strings
|
|
in section 4.1.6 of RFC 1212 applies."
|
|
INDEX { atmfAddressPort, atmfAddressAtmAddress }
|
|
::= { atmfAddressTable 1 }
|
|
|
|
AtmfAddressEntry ::=
|
|
SEQUENCE {
|
|
atmfAddressPort INTEGER,
|
|
atmfAddressAtmAddress AtmAddress2,
|
|
atmfAddressStatus INTEGER
|
|
}
|
|
|
|
atmfAddressPort OBJECT-TYPE
|
|
SYNTAX INTEGER (0..2147483647)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique value which identifies the UNI port for which the ATM address is
|
|
in effect. The value of 0 has the special meaning of identifying the local
|
|
UNI."
|
|
::= { atmfAddressEntry 1 }
|
|
|
|
atmfAddressAtmAddress OBJECT-TYPE
|
|
SYNTAX AtmAddress2
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The ATM address which is in effect on the user-side of the ATM UNI port."
|
|
::= { atmfAddressEntry 2 }
|
|
|
|
atmfAddressStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
valid(1),
|
|
invalid(2)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An indication of the validity of the ATM address at the user-side of
|
|
the UNI port. To configure a new address in this table, the user-side
|
|
must set the appropriate instance of this object to the value valid(1).
|
|
To delete an existing address in this able, the user-side must set the
|
|
appropriate instance of this object to the value invalid(2).
|
|
|
|
If circumstances occur on the network-side which cause an address to
|
|
become invalid, the network-side modifies the value of the appropriate
|
|
instance of this object to invalid(2).
|
|
|
|
Whenever the value of this object for a particular address becomes
|
|
invalid(2), the conceptual row for that address may be removed from the
|
|
table at anytime, either immediately or subsequently."
|
|
::= { atmfAddressEntry 3 }
|
|
|
|
END
|