mibs/MIBS/accedian/ACD-PORT-MIB

1523 lines
56 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
--
-- Accedian Enterprise Specific MIB
--
-- Copyright (c) 2005-2010, Accedian Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--
ACD-PORT-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
Unsigned32, Counter64
FROM SNMPv2-SMI
DisplayString, TruthValue, MacAddress
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
acdMibs
FROM ACCEDIAN-SMI;
acdPort MODULE-IDENTITY
LAST-UPDATED "201110100100Z"
ORGANIZATION "Accedian Networks, Inc."
CONTACT-INFO
"Accedian Technical Assistance Center
Accedian Networks, Inc.
4878 Levy, suite 202
Saint-Laurent, Quebec Canada H4R 2P1
E-mail: support@accedian.com"
DESCRIPTION
"The Port statistics for this Accedian Networks device."
REVISION "201110100100Z" -- 10 October 2011
DESCRIPTION
"Add acdPortConfigTableLastChangeTid."
REVISION "201010010100Z" -- 1 October 2010
DESCRIPTION
"..."
REVISION "200805010100Z" -- 1 May 2008
DESCRIPTION
"Initial version of MIB module ACD-PORT-MIB."
::= { acdMibs 9 }
acdPortMIBObjects OBJECT IDENTIFIER ::= { acdPort 1 }
acdPortConformance OBJECT IDENTIFIER ::= { acdPort 2 }
acdPortConfig OBJECT IDENTIFIER ::= { acdPortMIBObjects 1 }
acdPortStatus OBJECT IDENTIFIER ::= { acdPortMIBObjects 2 }
acdPortStats OBJECT IDENTIFIER ::= { acdPortMIBObjects 3 }
acdPortTableTid OBJECT IDENTIFIER ::= { acdPortMIBObjects 4 }
-------------------------------------------------------------------------------
-- The port configuration table.
-- This table contains all port configuration parameters
-------------------------------------------------------------------------------
acdPortConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of port configuration attributes"
::= { acdPortConfig 1 }
acdPortConfigEntry OBJECT-TYPE
SYNTAX AcdPortConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port configuration."
INDEX { acdPortConfigIndex }
::= { acdPortConfigTable 1 }
AcdPortConfigEntry ::= SEQUENCE {
acdPortConfigIndex Unsigned32,
acdPortConfigName DisplayString,
acdPortConfigAlias DisplayString,
acdPortConfigMacAddress MacAddress,
acdPortConfigConnectorId OBJECT IDENTIFIER,
acdPortConfigState TruthValue,
acdPortConfigMtu Unsigned32,
acdPortConfigAutoNegoState TruthValue,
acdPortConfigSpeed Unsigned32,
acdPortConfigDuplex INTEGER,
acdPortConfigMdi INTEGER,
acdPortConfigPauseMode INTEGER,
acdPortConfigAdvertisement BITS
}
acdPortConfigIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this acdPortConfig
entry."
::= { acdPortConfigEntry 1 }
acdPortConfigName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..31))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a string to identify the port."
::= { acdPortConfigEntry 2 }
acdPortConfigAlias OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is a string to give the port an alias."
::= { acdPortConfigEntry 3 }
acdPortConfigMacAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MAC address of the port."
::= { acdPortConfigEntry 4 }
acdPortConfigConnectorId OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object identifies the connector ID of the port. This object
shall identify the acdDescConnectorID object, defined in the
ACD-DESC-MIB."
::= { acdPortConfigEntry 5 }
acdPortConfigState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the port."
::= { acdPortConfigEntry 6 }
acdPortConfigMtu OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured MTU of the port. The value ranges from 1518 to 10240."
::= { acdPortConfigEntry 7 }
acdPortConfigAutoNegoState OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the auto negociation on the port."
::= { acdPortConfigEntry 8 }
acdPortConfigSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured speed of the port in Mbps. The valid values are 10, 100,
1000 and 10000."
::= { acdPortConfigEntry 9 }
acdPortConfigDuplex OBJECT-TYPE
SYNTAX INTEGER {
halfDuplex(1),
fullDuplex(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured duplex mode for this port."
::= { acdPortConfigEntry 10 }
acdPortConfigMdi OBJECT-TYPE
SYNTAX INTEGER {
autoMdi(1),
mdi(2),
mdix(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured MDI mode for this port."
::= { acdPortConfigEntry 11 }
acdPortConfigPauseMode OBJECT-TYPE
SYNTAX INTEGER {
disable(1),
local(2),
forward(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured pause mode for this port."
::= { acdPortConfigEntry 12 }
acdPortConfigAdvertisement OBJECT-TYPE
SYNTAX BITS {
bHalfDuplex10Mbps(0), -- Capable of Half Duplex 10Mbps
bFullDuplex10Mbps(1), -- Capable of Full Duplex 10Mbps
bHalfDuplex100Mbps(2), -- Capable of Half Duplex 100Mbps
bFullDuplex100Mbps(3), -- Capable of Full Duplex 100Mbps
bHalfDuplex1Gbps(4), -- Capable of Half Duplex 1Gbps
bFullDuplex1Gbps(5), -- Capable of Full Duplex 1Gbps
bPauseSymmetric(6), -- Capable of full-duplex pause
bPauseAsymmetric(7) -- Capable of asymetric pause
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "A value that identifies the set of port capabilities
to advertise during auto-negociation. Each bit indicates whether
or not the specific capability is valid on the system."
::= { acdPortConfigEntry 13 }
-------------------------------------------------------------------------------
-- The port status table.
-------------------------------------------------------------------------------
acdPortStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table for port status"
::= { acdPortStatus 1 }
acdPortStatusEntry OBJECT-TYPE
SYNTAX AcdPortStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Port status."
INDEX { acdPortStatusIndex }
::= { acdPortStatusTable 1 }
AcdPortStatusEntry ::= SEQUENCE {
acdPortStatusIndex Unsigned32,
acdPortStatusSpeed Unsigned32,
acdPortStatusDuplex INTEGER,
acdPortStatusMdi INTEGER,
acdPortStatusTxPause TruthValue,
acdPortStatusRxPause TruthValue,
acdPortStatusLinkPartnerAbility BITS,
acdPortStatusLinkStatus TruthValue,
acdPortStatusMedia BITS,
acdPortStatusIsMonitor TruthValue,
acdPortStatusIsManagement TruthValue,
acdPortStatusIsSFP TruthValue,
acdPortStatusIsFiber TruthValue
}
acdPortStatusIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this acdPortStatus
entry."
::= { acdPortStatusEntry 1 }
acdPortStatusSpeed OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current speed of the port in Mbps. The valid values are 10, 100
1000 and 10000."
::= { acdPortStatusEntry 2 }
acdPortStatusDuplex OBJECT-TYPE
SYNTAX INTEGER {
halfDuplex(1),
fullDuplex(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current duplex mode of the port."
::= { acdPortStatusEntry 3 }
acdPortStatusMdi OBJECT-TYPE
SYNTAX INTEGER {
mdi(1),
mdix(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The current MDI mode of the port."
::= { acdPortStatusEntry 4 }
acdPortStatusTxPause OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not the port is transmitting pause frames."
::= { acdPortStatusEntry 5 }
acdPortStatusRxPause OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates whether or not the port is receiving pause frames."
::= { acdPortStatusEntry 6 }
acdPortStatusLinkPartnerAbility OBJECT-TYPE
SYNTAX BITS {
bHalfDuplex10Mbps(0), -- Capable of Half Duplex 10Mbps
bFullDuplex10Mbps(1), -- Capable of Full Duplex 10Mbps
bHalfDuplex100Mbps(2), -- Capable of Half Duplex 100Mbps
bFullDuplex100Mbps(3), -- Capable of Full Duplex 100Mbps
bHalfDuplex1Gbps(4), -- Capable of Half Duplex 1Gbps
bFullDuplex1Gbps(5), -- Capable of Full Duplex 1Gbps
bPauseSymmetric(6), -- Capable of full-duplex pause
bPauseAsymmetric(7) -- Capable of asymetric pause
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value that identifies the set of port capabilities
advertised by the link partner. Each bit indicates whether
or not the specific capability is valid on the link partner
system."
::= { acdPortStatusEntry 7 }
acdPortStatusLinkStatus OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the port link is Up or Down.
Down(FALSE),
Up(TRUE)"
::= { acdPortStatusEntry 8 }
acdPortStatusMedia OBJECT-TYPE
SYNTAX BITS {
bOther(0), -- other or unknown
bAUI(1), -- AUI
b10base5(2), -- 10BASE-5
bFoirl(3), -- FOIRL
b10base2(4), -- 10BASE-2
b10baseT(5), -- 10BASE-T duplex mode unknown
b10baseFP(6), -- 10BASE-FP
b10baseFB(7), -- 10BASE-FB
b10baseFL(8), -- 10BASE-FL duplex mode unknown
b10broad36(9), -- 10BROAD36
b10baseTHD(10), -- 10BASE-T half duplex mode
b10baseTFD(11), -- 10BASE-T full duplex mode (Supported)
b10baseFLHD(12), -- 10BASE-FL half duplex mode
b10baseFLFD(13), -- 10BASE-FL full duplex mode
b100baseT4(14), -- 100BASE-T4
b100baseTXHD(15), -- 100BASE-TX half duplex mode
b100baseTXFD(16), -- 100BASE-TX full duplex mode (Supported)
b100baseFXHD(17), -- 100BASE-FX half duplex mode
b100baseFXFD(18), -- 100BASE-FX full duplex mode (Supported)
b100baseT2HD(19), -- 100BASE-T2 half duplex mode
b100baseT2FD(20), -- 100BASE-T2 full duplex mode
b1000baseXHD(21), -- 1000BASE-X half duplex mode
b1000baseXFD(22), -- 1000BASE-X full duplex mode (Supported)
b1000baseLXHD(23), -- 1000BASE-LX half duplex mode
b1000baseLXFD(24), -- 1000BASE-LX full duplex mode (Supported)
b1000baseSXHD(25), -- 1000BASE-SX half duplex mode
b1000baseSXFD(26), -- 1000BASE-SX full duplex mode (Supported)
b1000baseCXHD(27), -- 1000BASE-CX half duplex mode
b1000baseCXFD(28), -- 1000BASE-CX full duplex mode (Supported)
b1000baseTHD(29), -- 1000BASE-T half duplex mode
b1000baseTFD(30) -- 1000BASE-T full duplex mode (Supported - Copper SFP)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value that uniquely identifies the selected media type."
::= { acdPortStatusEntry 9 }
acdPortStatusIsMonitor OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the port is a monitor port.
No(FALSE),
Yes(TRUE)"
::= { acdPortStatusEntry 10 }
acdPortStatusIsManagement OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the port is a management port.
No(FALSE),
Yes(TRUE)"
::= { acdPortStatusEntry 11 }
acdPortStatusIsSFP OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the port has an SFP.
No(FALSE),
Yes(TRUE)"
::= { acdPortStatusEntry 12 }
acdPortStatusIsFiber OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Indicates if the port is connected to fiber.
No(FALSE),
Yes(TRUE)"
::= { acdPortStatusEntry 13 }
-------------------------------------------------------------------------------
-- The port transmit statistics table.
-- This table contains all port transmit statistics.
-------------------------------------------------------------------------------
acdPortTxStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdPortTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of port transmit statistics"
::= { acdPortStats 1 }
acdPortTxStatsEntry OBJECT-TYPE
SYNTAX AcdPortTxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port transmit statistics."
INDEX { acdPortTxStatsIndex }
::= { acdPortTxStatsTable 1 }
AcdPortTxStatsEntry ::= SEQUENCE {
acdPortTxStatsIndex Unsigned32,
acdPortTxStatsSupportBits BITS,
acdPortTxStatsBytesGood Counter64,
acdPortTxStatsBytesTotal Counter64,
acdPortTxStatsUnicastPkts Counter64,
acdPortTxStatsMulticastPkts Counter64,
acdPortTxStatsBroadcastPkts Counter64,
acdPortTxStatsPauseFrames Counter64,
acdPortTxStatsTaggedFrames Counter64,
acdPortTxStatsCRCErrors Counter64,
acdPortTxStatsDeferred Counter64,
acdPortTxStatsExcessiveDeferrals Counter64,
acdPortTxStatsSingleCollisions Counter64,
acdPortTxStatsMultipleCollisions Counter64,
acdPortTxStatsExcessiveCollisions Counter64,
acdPortTxStatsLateCollisions Counter64,
acdPortTxStatsNormalCollisions Counter64,
acdPortTxStatsFifoErrors Counter64,
acdPortTxStatsPkts64 Counter64,
acdPortTxStatsPkts65to127 Counter64,
acdPortTxStatsPkts128to255 Counter64,
acdPortTxStatsPkts256to511 Counter64,
acdPortTxStatsPkts512to1023 Counter64,
acdPortTxStatsPkts1024to1518 Counter64,
acdPortTxStatsPkts1519to2047 Counter64,
acdPortTxStatsPkts2048to4095 Counter64,
acdPortTxStatsPkts4096to8191 Counter64,
acdPortTxStatsPkts8192andMore Counter64,
acdPortTxStatsPktsLarge Counter64
}
acdPortTxStatsIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this acdPortTxStats
entry."
::= { acdPortTxStatsEntry 1 }
acdPortTxStatsSupportBits OBJECT-TYPE
SYNTAX BITS {
bBytesGood(0), -- acdPortTxStatsBytesGood validity flag
bBytesTotal(1), -- acdPortTxStatsBytesTotal validity flag
bUnicastPkts(2), -- acdPortTxStatsUnicastPkts validity flag
bMulticastPkts(3), -- acdPortTxStatsMulticastPkts validity flag
bBroadcastPkts(4), -- acdPortTxStatsBroadcastPkts validity flag
bPauseFrames(5), -- acdPortTxStatsPauseFrames validity flag
bTaggedFrames(6), -- acdPortTxStatsTaggedFrames validity flag
bCRCErrors(7), -- acdPortTxStatsCRCErrors validity flag
bDeferred(8), -- acdPortTxStatsDeferred validity flag
bExcessiveDeferrals(9), -- acdPortTxStatsExcessiveDeferrals validity flag
bSingleCollisions(10), -- acdPortTxStatsSingleCollisions validity flag
bMultipleCollisions(11), -- acdPortTxStatsMultipleCollisions validity flag
bExcessiveCollisions(12),-- acdPortTxStatsExcessiveCollisions validity flag
bLateCollisions(13), -- acdPortTxStatsLateCollisions validity flag
bNormalCollisions(14), -- acdPortTxStatsNormalCollisions validity flag
bFifoErrors(15), -- acdPortTxStatsFifoErrors validity flag
bPkts64(16), -- acdPortTxStatsPkts64 validity flag
bPkts65to127(17), -- acdPortTxStatsPkts65to127 validity flag
bPkts128to255(18), -- acdPortTxStatsPkts128to255 validity flag
bPkts256to511(19), -- acdPortTxStatsPkts256to511 validity flag
bPkts512to1023(20), -- acdPortTxStatsPkts512to1023 validity flag
bPkts1024to1518(21), -- acdPortTxStatsPkts1024to1518 validity flag
bPkts1519to2047(22), -- acdPortTxStatsPkts1519to2047 validity flag
bPkts2048to4095(23), -- acdPortTxStatsPkts2048to4095 validity flag
bPkts4096to8191(24), -- acdPortTxStatsPkts4096to8191 validity flag
bPkts8192andMore(25), -- acdPortTxStatsPkts8192andMore validity flag
bPktsLarge(26) -- acdPortTxStatsPktsLarge validity flag
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value that identifies the set of TX statistics
supported by the device. Each bit indicates whether
or not the specific statistic value is valid on the
system."
::= { acdPortTxStatsEntry 2 }
acdPortTxStatsBytesGood OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the total number of bytes transmitted by the port
in good packets. The count includes the 4 CRC bytes but does not
include the preamble or SFD bytes. A good packet is one that has been
transmitted successfully (not aborted) with a good CRC. It is assumed
that all transmit packets are properly sized, 64 bytes (after any
padding) to maxsize bytes long."
::= { acdPortTxStatsEntry 3 }
acdPortTxStatsBytesTotal OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the total number of bytes transmitted by the port
in good and bad packets. The count includes the 4 CRC bytes but does
not include the preamble or SFD bytes. Bad packets include normal
collisions, late collisions, and FIFO underflows. For collisions,
all bytes transmitted before the start of the collision as well as
the colliding and jam bytes are counted. For FIFO underflows, all
bytes actually transmitted are counted."
::= { acdPortTxStatsEntry 4 }
acdPortTxStatsUnicastPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good unicast packets transmitted by this port.
Good unicast packets are packets that are not dropped and have a good
CRC. Unicast packets are identified by having a 0 in the least
significant bit of the first byte of the destination address (i.e.
the first bit transmitted is a 0)."
::= { acdPortTxStatsEntry 5 }
acdPortTxStatsMulticastPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good multicast packets transmitted by this
port (good means not dropped and valid CRC). Multicast packets are
identified by having a 1 in the least significant bit of the first
byte of the destination address (i.e. the first bit transmitted is
a 1). Broadcast packets are not included in this count."
::= { acdPortTxStatsEntry 6 }
acdPortTxStatsBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good broadcast packets transmitted by this
port (good means not dropped and valid CRC). Broadcast packets are
identified by a destination address of all 1."
::= { acdPortTxStatsEntry 7 }
acdPortTxStatsPauseFrames OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good flow control pause packets transmitted
by this port (good means not dropped and valid CRC). Flow control
pause packets are identified by a type of 0x8808 and an opcode field
of 0x0001."
::= { acdPortTxStatsEntry 8 }
acdPortTxStatsTaggedFrames OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good VLAN packets transmitted by this port
(good means not dropped and valid CRC). VLAN packets are identified
by a type field equal to 0x8100 in the outer VLAN tag."
::= { acdPortTxStatsEntry 9 }
acdPortTxStatsCRCErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the transmitted packets with a bad non-appended
CRC field. This count doesn't include any packets with a bad CRC due
to a FIFO underflow."
::= { acdPortTxStatsEntry 10 }
acdPortTxStatsDeferred OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of packets that were deferred on the
first transmit attempt due to the medium being busy. Packets with
subsequent deferrals (for instance, after a collision back off) are
not counted. Whether the packet is eventually transmitted successfully
or not is irrelevant to this counter. Packets dropped due to excess
deferral that occur during the initial transmit attempt are not
counted."
::= { acdPortTxStatsEntry 11 }
acdPortTxStatsExcessiveDeferrals OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of packets dropped by this port due to
excessive deferral. The deferral time starts at the beginning of each
transmission attempt and ends when the transmission starts (regardless
of collisions). The deferral is excessive if more than 3036 byte times
have passed without the transmission starting."
::= { acdPortTxStatsEntry 12 }
acdPortTxStatsSingleCollisions OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of times a packet is successfully
transmitted from this port after experiencing a single collision.
This count does not include erroneous (dropped) packets."
::= { acdPortTxStatsEntry 13 }
acdPortTxStatsMultipleCollisions OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of times a packet is successfully
transmitted from this port after experiencing multiple collisions.
This count does not include erroneous (dropped) packets and also does
not include packets dropped due to excess collisions."
::= { acdPortTxStatsEntry 14 }
acdPortTxStatsExcessiveCollisions OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of packets dropped by this port due
to excess collisions (number of collisions equals MaxRetry+1). This
count does not include packets dropped due to FIFO underflow or
late collisions (even if the late collision is also an excessive
collision)."
::= { acdPortTxStatsEntry 15 }
acdPortTxStatsLateCollisions OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of packets dropped by this port due
to late collisions. A late collision is a collision that occurs
after the collision window time (normally 512-bit times). This count
does not include packets dropped due to FIFO underflow. Late
collisions are not retried."
::= { acdPortTxStatsEntry 16 }
acdPortTxStatsNormalCollisions OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the total number of normal collisions that have
occurred on this port during all transmission attempts. FIFO
underflows, late collisions and collisions that occur while this
port is not trying to transmit are not counted. This count does not
include collisions during half-duplex back pressure."
::= { acdPortTxStatsEntry 17 }
acdPortTxStatsFifoErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of packets dropped by this port due to
an underflow in the transmit FIFO. When an underflow is detected,
transmission is immediately aborted after sending a known bad
(inverted) CRC sequence. The FIFO underflow error takes precedence
over all other errors if this counter is incremented, then none of
the other packet type counters are incremented."
::= { acdPortTxStatsEntry 18 }
acdPortTxStatsPkts64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were exactly 64 bytes in length (excluding preamble and SFD but
including CRC)."
::= { acdPortTxStatsEntry 19 }
acdPortTxStatsPkts65to127 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were 65 to 127 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortTxStatsEntry 20 }
acdPortTxStatsPkts128to255 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were 128 to 255 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortTxStatsEntry 21 }
acdPortTxStatsPkts256to511 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were 256 to 511 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortTxStatsEntry 22 }
acdPortTxStatsPkts512to1023 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were 512 to 1023 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortTxStatsEntry 23 }
acdPortTxStatsPkts1024to1518 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were 1024 to 1518 bytes in length (excluding preamble and SFD
but including CRC)."
::= { acdPortTxStatsEntry 24 }
acdPortTxStatsPkts1519to2047 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were 1519 to 2047 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortTxStatsEntry 25 }
acdPortTxStatsPkts2048to4095 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were 2048 to 4095 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortTxStatsEntry 26 }
acdPortTxStatsPkts4096to8191 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were 4096 to 8191 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortTxStatsEntry 27 }
acdPortTxStatsPkts8192andMore OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, transmitted by this port
that were greater than 8192 bytes in length (excluding preamble and
SFD but including CRC)."
::= { acdPortTxStatsEntry 28 }
acdPortTxStatsPktsLarge OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of large packets transmitted by this port. Define
the size of large packets on the Port configuration."
::= { acdPortTxStatsEntry 29 }
-------------------------------------------------------------------------------
-- The port receive statistics table.
-- This table contains all port receive statistics.
-------------------------------------------------------------------------------
acdPortRxStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AcdPortRxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of port receive statistics"
::= { acdPortStats 2 }
acdPortRxStatsEntry OBJECT-TYPE
SYNTAX AcdPortRxStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"port receive statistics."
INDEX { acdPortRxStatsIndex }
::= { acdPortRxStatsTable 1 }
AcdPortRxStatsEntry ::= SEQUENCE {
acdPortRxStatsIndex Unsigned32,
acdPortRxStatsSupportBits BITS,
acdPortRxStatsBytesGood Counter64,
acdPortRxStatsBytesTotal Counter64,
acdPortRxStatsShortOk Counter64,
acdPortRxStatsShortBad Counter64,
acdPortRxStatsLongOk Counter64,
acdPortRxStatsLongBad Counter64,
acdPortRxStatsUnicastPkts Counter64,
acdPortRxStatsMulticastPkts Counter64,
acdPortRxStatsBroadcastPkts Counter64,
acdPortRxStatsPauseFrames Counter64,
acdPortRxStatsTaggedFrames Counter64,
acdPortRxStatsCRCErrors Counter64,
acdPortRxStatsAlignErrors Counter64,
acdPortRxStatsRuntFrames Counter64,
acdPortRxStatsLengthErrors Counter64,
acdPortRxStatsFalseCRS Counter64,
acdPortRxStatsPhyErrors Counter64,
acdPortRxStatsFifoErrors Counter64,
acdPortRxStatsIgnored Counter64,
acdPortRxStatsBadOpcode Counter64,
acdPortRxStatsPkts64 Counter64,
acdPortRxStatsPkts65to127 Counter64,
acdPortRxStatsPkts128to255 Counter64,
acdPortRxStatsPkts256to511 Counter64,
acdPortRxStatsPkts512to1023 Counter64,
acdPortRxStatsPkts1024to1518 Counter64,
acdPortRxStatsPkts1519to2047 Counter64,
acdPortRxStatsPkts2048to4095 Counter64,
acdPortRxStatsPkts4096to8191 Counter64,
acdPortRxStatsPkts8192andMore Counter64,
acdPortRxStatsPktsLarge Counter64
}
acdPortRxStatsIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The value of this object uniquely identifies this acdPortRxStats
entry."
::= { acdPortRxStatsEntry 1 }
acdPortRxStatsSupportBits OBJECT-TYPE
SYNTAX BITS {
bBytesGood(0), -- acdPortRxStatsBytesGood validity flag
bBytesTotal(1), -- acdPortRxStatsBytesTotal validity flag
bRxStatsShortOk(2), -- acdPortRxStatsShortOkPkts validity flag
bRxStatsShortBad(3), -- acdPortRxStatsShortBadPkts validity flag
bRxStatsLongOk(4), -- acdPortRxStatsLongOkPkts validity flag
bRxStatsLongBad(5), -- acdPortRxStatsLongBadPkts validity flag
bUnicastPkts(6), -- acdPortRxStatsUnicastPkts validity flag
bMulticastPkts(7), -- acdPortRxStatsMulticastPkts validity flag
bBroadcastPkts(8), -- acdPortRxStatsBroadcastPkts validity flag
bPauseFrames(9), -- acdPortRxStatsPauseFrames validity flag
bTaggedFrames(10), -- acdPortRxStatsTaggedFrames validity flag
bCRCErrors(11), -- acdPortRxStatsCRCErrors validity flag
bAlignErrors(12), -- acdPortRxStatsAlignErrors validity flag
bRuntFrames(13), -- acdPortRxStatsRuntFrames validity flag
bLengthErrors(14), -- acdPortRxStatsLengthErrors validity flag
bFalseCRS(15), -- acdPortRxStatsFalseCRS validity flag
bPhyErrors(16), -- acdPortRxStatsPhyErrors validity flag
bFifoErrors(17), -- acdPortRxStatsFifoErrors validity flag
bIgnored(18), -- acdPortRxStatsIgnored validity flag
bBadOpcode(19), -- acdPortRxStatsBadOpCode validity flag
bPkts64(20), -- acdPortRxStatsPkts64 validity flag
bPkts65to127(21), -- acdPortRxStatsPkts65to127 validity flag
bPkts128to255(22), -- acdPortRxStatsPkts128to255 validity flag
bPkts256to511(23), -- acdPortRxStatsPkts256to511 validity flag
bPkts512to1023(24), -- acdPortRxStatsPkts512to1023 validity flag
bPkts1024to1518(25), -- acdPortRxStatsPkts1024to1518 validity flag
bPkts1519to2047(26), -- acdPortRxStatsPkts1519to2047 validity flag
bPkts2048to4095(27), -- acdPortRxStatsPkts2048to4095 validity flag
bPkts4096to8191(28), -- acdPortRxStatsPkts4096to8191 validity flag
bPkts8192andMore(29), -- acdPortRxStatsPkts8192andMore validity flag
bPktsLarge(30) -- acdPortRxStatsPktsLarge validity flag
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A value that identifies the set of RX statistics
supported by the device. Each bit indicates whether
or not the specific statistic value is valid on the
system."
::= { acdPortRxStatsEntry 2 }
acdPortRxStatsBytesGood OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the total number of bytes received by the port in
good packets. The count includes the 4 CRC bytes but does not include
the preamble or SFD bytes. A good packet is a well-formed normally
sized packet (64 to maxsize bytes) with good CRC and no PHY or FIFO
errors."
::= { acdPortRxStatsEntry 3 }
acdPortRxStatsBytesTotal OBJECT-TYPE
SYNTAX Counter64
UNITS "Octets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the total number of bytes received by the port in
good and bad packets. The count includes the 4 CRC bytes (if present)
but does not include the preamble or SFD bytes. Good packets are
described above. Bad packets include short packets (less than 64
bytes), long packets (greater than maxsize bytes), packets with bad
CRC, packets with PHY errors, and packets with receive FIFO errors.
Bytes in bad packets resulting from a collision are counted if the
SFD is detected."
::= { acdPortRxStatsEntry 4 }
acdPortRxStatsShortOk OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of error-free packets received on this port that are
shorter than 64 bytes. A packet is error-free if it has a valid CRC,
no PHY errorsand no FIFO errors."
::= { acdPortRxStatsEntry 5 }
acdPortRxStatsShortBad OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of packets received on this port that are shorter
than 64 bytes and have a bad CRC. Packets with PHY or FIFO errors
are not counted."
::= { acdPortRxStatsEntry 6 }
acdPortRxStatsLongOk OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of error-free packets received on this port that
are longer than maxsize bytes. A packet is error-free if it has a
valid CRC, no PHY errors and no FIFO errors."
::= { acdPortRxStatsEntry 7 }
acdPortRxStatsLongBad OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of packets received on this port that are longer
than 64 bytes and have a bad CRC. Packets with PHY or FIFO errors
are not counted."
::= { acdPortRxStatsEntry 8 }
acdPortRxStatsUnicastPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good unicast packets received by this port.
A good unicast packet is a normally sized packet (64 to maxsize
bytes) that is received without error a good CRC, no PHY or FIFO
errors. Unicast packets are identified by having a 0 in the least
significant bit of the first byte of the destination address (i.e.
the first bit received is a 0)."
::= { acdPortRxStatsEntry 9 }
acdPortRxStatsMulticastPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good multicast packets received by this port.
A good multicast packet is a normally sized packet (64 to maxsize
bytes) that is received without error, a good CRC, no PHY or FIFO
errors. Multicast packets are identified by having a 1 in the least
significant bit of the first byte of the destination address (i.e.
the first bit received is a 1). Broadcast packets are not included
in this count."
::= { acdPortRxStatsEntry 10 }
acdPortRxStatsBroadcastPkts OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good broadcast packets received by this port.
A good broadcast packet is a normally sized packet (64 to maxsize
bytes) that is received without error, a good CRC, no PHY or FIFO
errors. Broadcast packets are identified by a destination address
of all 1's."
::= { acdPortRxStatsEntry 11 }
acdPortRxStatsPauseFrames OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good flow control pause packets received by
this port (good CRC, no PHY or FIFO errors, normally sized). Flow
control pause packets are identified by a type of 0x8808, and an
opcode field of 0x0001."
::= { acdPortRxStatsEntry 12 }
acdPortRxStatsTaggedFrames OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good VLAN packets receive by this port
(good CRC, no PHY or FIFO errors, normally sized). VLAN packets
are identified by a type field equal to 0x8100 in the outer VLAN tag."
::= { acdPortRxStatsEntry 13 }
acdPortRxStatsCRCErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of normally sized packets (64 to maxsize bytes)
received by this port with a CRC error but not a dribbling nibble
(packet is an integral number of bytes long). Packets with FIFO or
PHY errors are not counted."
::= { acdPortRxStatsEntry 14 }
acdPortRxStatsAlignErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of normally sized packets (64 to maxsize bytes)
received by this port with a CRC error and a dribbling nibble (packet
is not an integral number of bytes long). Packets with PHY or FIFO
errors are not counted."
::= { acdPortRxStatsEntry 15 }
acdPortRxStatsRuntFrames OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of receive packets (or events)
detected by this port without SDF detection but with carrier
assertion. Packets with valid SFD but no data bytes are also
counted as runts. After detecting a runt packet, the update of
the RxRunts counter is held off until the next valid packet is
received. If multiple runt packets occur between valid packets,
the RxRunts counter is incremented only once."
::= { acdPortRxStatsEntry 16 }
acdPortRxStatsLengthErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of good packets received by this
port with a length field check error. A length check error occurs
when the value in the length field is within the valid range for
data length (3-1500 bytes) but does not match the actual data
length of the packet. Length field values less than 46 bytes
(which corresponds to the minimum legal packet size of 64 bytes)
are not checked due to padding."
::= { acdPortRxStatsEntry 17 }
acdPortRxStatsFalseCRS OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of receive packets (or events)
detected by this port with a false carrier (SSD1 not followed by
SSD2). After detecting a false carrier, update of the RxFalseCRS
counter is held off until the next valid packet is received. If
multiple false carrier events occur between valid packets, the
RxFalseCRS counter is incremented only once."
::= { acdPortRxStatsEntry 18 }
acdPortRxStatsPhyErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of packets received by this port with
RX_ER asserted during reception (while RX_DV asserted). Packets with
a FIFO error are not counted."
::= { acdPortRxStatsEntry 19 }
acdPortRxStatsFifoErrors OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of receive packets dropped or aborted
due to receive FIFO overflow. The FIFO overflow error takes precedence
over all other errors - if this counter is incremented, then none of
the other packet type counters is incremented."
::= { acdPortRxStatsEntry 20 }
acdPortRxStatsIgnored OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the number of received packets that have been
ignored by this port. A packet is ignored if it violates the
programmed preamble rules or it violates the minimum data gap. The
preamble rules include long preamble enforcement (greater than 23
nibbles) and pure preamble enforcement (only 55h bytes). The minimum
data gap is the time between packet data transfers and is measured
from immediately after the last CRC byte of the previous packet
through the SFD field of the current packet. The normal data gap
is 20 bytes long (12 bytes of IPG and 8 bytes of preamble/SFD).
The enforcement limit is set to 10 bytes (half the normal gap
length)."
::= { acdPortRxStatsEntry 21 }
acdPortRxStatsBadOpcode OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is a count of the good control packets received by this port
(good CRC, no PHY or FIFO errors, normally sized) with an unknown
opcode. Unknown control packets are identified by a type field of
88-08 and an opcode field not equal to 00-01."
::= { acdPortRxStatsEntry 22 }
acdPortRxStatsPkts64 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port
that were exactly 64 bytes in length (excluding preamble and SFD
but including CRC)."
::= { acdPortRxStatsEntry 23 }
acdPortRxStatsPkts65to127 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port that
were 65 to 127 bytes in length inclusive (excluding preamble and SFD
but including CRC)."
::= { acdPortRxStatsEntry 24 }
acdPortRxStatsPkts128to255 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port
that were 128 to 255 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortRxStatsEntry 25 }
acdPortRxStatsPkts256to511 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port
that were 256 to 511 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortRxStatsEntry 26 }
acdPortRxStatsPkts512to1023 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port
that were 512 to 1023 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortRxStatsEntry 27 }
acdPortRxStatsPkts1024to1518 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port
that were 1024 to 1518 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortRxStatsEntry 28 }
acdPortRxStatsPkts1519to2047 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port
that were 1519 to 2047 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortRxStatsEntry 29 }
acdPortRxStatsPkts2048to4095 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port
that were 2048 to 4095 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortRxStatsEntry 30 }
acdPortRxStatsPkts4096to8191 OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port
that were 4096 to 8191 bytes in length inclusive (excluding preamble
and SFD but including CRC)."
::= { acdPortRxStatsEntry 31 }
acdPortRxStatsPkts8192andMore OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of packets, good or bad, received by this port that
were greater than 8192 bytes in length (excluding preamble and SFD
but including CRC)."
::= { acdPortRxStatsEntry 32 }
acdPortRxStatsPktsLarge OBJECT-TYPE
SYNTAX Counter64
UNITS "Packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The total number of large packets received by this port. Define the
size of large packets on the Port configuration page."
::= { acdPortRxStatsEntry 33 }
---------------------------------------------------------------------------
-- Port Transaction ID Information
---------------------------------------------------------------------------
acdPortConfigTableLastChangeTid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This is the transaction ID of the last change of the acdPortConfigTable
table. If this value is different since the last read this is indicate
a table change."
::= { acdPortTableTid 1 }
---------------------------------------------------------------------------
-- ACD-PORT-MIB Module - Conformance Information
---------------------------------------------------------------------------
acdPortCompliances OBJECT IDENTIFIER ::= { acdPortConformance 1 }
acdPortGroups OBJECT IDENTIFIER ::= { acdPortConformance 2 }
---------------------------------------------------------------------------
-- Units of conformance
---------------------------------------------------------------------------
acdPortConfigGroup OBJECT-GROUP
OBJECTS {
acdPortConfigName,
acdPortConfigAlias,
acdPortConfigMacAddress,
acdPortConfigConnectorId,
acdPortConfigState,
acdPortConfigMtu,
acdPortConfigAutoNegoState,
acdPortConfigSpeed,
acdPortConfigDuplex,
acdPortConfigMdi,
acdPortConfigPauseMode,
acdPortConfigAdvertisement
}
STATUS current
DESCRIPTION
"."
::= { acdPortGroups 1 }
acdPortStatusGroup OBJECT-GROUP
OBJECTS {
acdPortStatusSpeed,
acdPortStatusDuplex,
acdPortStatusMdi,
acdPortStatusTxPause,
acdPortStatusRxPause,
acdPortStatusLinkPartnerAbility,
acdPortStatusLinkStatus,
acdPortStatusMedia,
acdPortStatusIsMonitor,
acdPortStatusIsManagement,
acdPortStatusIsSFP,
acdPortStatusIsFiber
}
STATUS current
DESCRIPTION
"."
::= { acdPortGroups 2 }
acdPortTxStatsGroup OBJECT-GROUP
OBJECTS {
acdPortTxStatsSupportBits,
acdPortTxStatsBytesGood,
acdPortTxStatsBytesTotal,
acdPortTxStatsUnicastPkts,
acdPortTxStatsMulticastPkts,
acdPortTxStatsBroadcastPkts,
acdPortTxStatsPauseFrames,
acdPortTxStatsTaggedFrames,
acdPortTxStatsCRCErrors,
acdPortTxStatsDeferred,
acdPortTxStatsExcessiveDeferrals,
acdPortTxStatsSingleCollisions,
acdPortTxStatsMultipleCollisions,
acdPortTxStatsExcessiveCollisions,
acdPortTxStatsLateCollisions,
acdPortTxStatsNormalCollisions,
acdPortTxStatsFifoErrors,
acdPortTxStatsPkts64,
acdPortTxStatsPkts65to127,
acdPortTxStatsPkts128to255,
acdPortTxStatsPkts256to511,
acdPortTxStatsPkts512to1023,
acdPortTxStatsPkts1024to1518,
acdPortTxStatsPkts1519to2047,
acdPortTxStatsPkts2048to4095,
acdPortTxStatsPkts4096to8191,
acdPortTxStatsPkts8192andMore,
acdPortTxStatsPktsLarge
}
STATUS current
DESCRIPTION
"."
::= { acdPortGroups 3 }
acdPortRxStatsGroup OBJECT-GROUP
OBJECTS {
acdPortRxStatsSupportBits,
acdPortRxStatsBytesGood,
acdPortRxStatsBytesTotal,
acdPortRxStatsShortOk,
acdPortRxStatsShortBad,
acdPortRxStatsLongOk,
acdPortRxStatsLongBad,
acdPortRxStatsUnicastPkts,
acdPortRxStatsMulticastPkts,
acdPortRxStatsBroadcastPkts,
acdPortRxStatsPauseFrames,
acdPortRxStatsTaggedFrames,
acdPortRxStatsCRCErrors,
acdPortRxStatsAlignErrors,
acdPortRxStatsRuntFrames,
acdPortRxStatsLengthErrors,
acdPortRxStatsFalseCRS,
acdPortRxStatsPhyErrors,
acdPortRxStatsFifoErrors,
acdPortRxStatsIgnored,
acdPortRxStatsBadOpcode,
acdPortRxStatsPkts64,
acdPortRxStatsPkts65to127,
acdPortRxStatsPkts128to255,
acdPortRxStatsPkts256to511,
acdPortRxStatsPkts512to1023,
acdPortRxStatsPkts1024to1518,
acdPortRxStatsPkts1519to2047,
acdPortRxStatsPkts2048to4095,
acdPortRxStatsPkts4096to8191,
acdPortRxStatsPkts8192andMore,
acdPortRxStatsPktsLarge
}
STATUS current
DESCRIPTION
"."
::= { acdPortGroups 4 }
acdPortTidGroup OBJECT-GROUP
OBJECTS {
acdPortConfigTableLastChangeTid
}
STATUS current
DESCRIPTION
"List of scalars to monitior changes in tables."
::= { acdPortGroups 5 }
acdPortCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for support of the ACD-PORT-MIB module."
MODULE
MANDATORY-GROUPS {
acdPortConfigGroup,
acdPortStatusGroup,
acdPortTxStatsGroup,
acdPortRxStatsGroup,
acdPortTidGroup
}
::= { acdPortCompliances 1 }
END