1523 lines
56 KiB
Plaintext
1523 lines
56 KiB
Plaintext
--
|
|
-- Accedian Enterprise Specific MIB
|
|
--
|
|
-- Copyright (c) 2005-2010, Accedian Networks, Inc.
|
|
-- All rights reserved.
|
|
--
|
|
-- The contents of this document are subject to change without notice.
|
|
--
|
|
|
|
|
|
ACD-PORT-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
Unsigned32, Counter64
|
|
FROM SNMPv2-SMI
|
|
DisplayString, TruthValue, MacAddress
|
|
FROM SNMPv2-TC
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
acdMibs
|
|
FROM ACCEDIAN-SMI;
|
|
|
|
acdPort MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "201110100100Z"
|
|
ORGANIZATION "Accedian Networks, Inc."
|
|
CONTACT-INFO
|
|
"Accedian Technical Assistance Center
|
|
Accedian Networks, Inc.
|
|
4878 Levy, suite 202
|
|
Saint-Laurent, Quebec Canada H4R 2P1
|
|
E-mail: support@accedian.com"
|
|
DESCRIPTION
|
|
"The Port statistics for this Accedian Networks device."
|
|
|
|
REVISION "201110100100Z" -- 10 October 2011
|
|
DESCRIPTION
|
|
"Add acdPortConfigTableLastChangeTid."
|
|
|
|
REVISION "201010010100Z" -- 1 October 2010
|
|
DESCRIPTION
|
|
"..."
|
|
|
|
REVISION "200805010100Z" -- 1 May 2008
|
|
DESCRIPTION
|
|
"Initial version of MIB module ACD-PORT-MIB."
|
|
|
|
::= { acdMibs 9 }
|
|
|
|
acdPortMIBObjects OBJECT IDENTIFIER ::= { acdPort 1 }
|
|
acdPortConformance OBJECT IDENTIFIER ::= { acdPort 2 }
|
|
|
|
acdPortConfig OBJECT IDENTIFIER ::= { acdPortMIBObjects 1 }
|
|
acdPortStatus OBJECT IDENTIFIER ::= { acdPortMIBObjects 2 }
|
|
acdPortStats OBJECT IDENTIFIER ::= { acdPortMIBObjects 3 }
|
|
|
|
acdPortTableTid OBJECT IDENTIFIER ::= { acdPortMIBObjects 4 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- The port configuration table.
|
|
-- This table contains all port configuration parameters
|
|
-------------------------------------------------------------------------------
|
|
|
|
acdPortConfigTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of port configuration attributes"
|
|
::= { acdPortConfig 1 }
|
|
|
|
acdPortConfigEntry OBJECT-TYPE
|
|
SYNTAX AcdPortConfigEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port configuration."
|
|
INDEX { acdPortConfigIndex }
|
|
::= { acdPortConfigTable 1 }
|
|
|
|
|
|
AcdPortConfigEntry ::= SEQUENCE {
|
|
acdPortConfigIndex Unsigned32,
|
|
acdPortConfigName DisplayString,
|
|
acdPortConfigAlias DisplayString,
|
|
acdPortConfigMacAddress MacAddress,
|
|
acdPortConfigConnectorId OBJECT IDENTIFIER,
|
|
acdPortConfigState TruthValue,
|
|
acdPortConfigMtu Unsigned32,
|
|
acdPortConfigAutoNegoState TruthValue,
|
|
acdPortConfigSpeed Unsigned32,
|
|
acdPortConfigDuplex INTEGER,
|
|
acdPortConfigMdi INTEGER,
|
|
acdPortConfigPauseMode INTEGER,
|
|
acdPortConfigAdvertisement BITS
|
|
}
|
|
|
|
acdPortConfigIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object uniquely identifies this acdPortConfig
|
|
entry."
|
|
::= { acdPortConfigEntry 1 }
|
|
|
|
acdPortConfigName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..31))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string to identify the port."
|
|
::= { acdPortConfigEntry 2 }
|
|
|
|
acdPortConfigAlias OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..255))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a string to give the port an alias."
|
|
::= { acdPortConfigEntry 3 }
|
|
|
|
acdPortConfigMacAddress OBJECT-TYPE
|
|
SYNTAX MacAddress
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The MAC address of the port."
|
|
::= { acdPortConfigEntry 4 }
|
|
|
|
acdPortConfigConnectorId OBJECT-TYPE
|
|
SYNTAX OBJECT IDENTIFIER
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This object identifies the connector ID of the port. This object
|
|
shall identify the acdDescConnectorID object, defined in the
|
|
ACD-DESC-MIB."
|
|
::= { acdPortConfigEntry 5 }
|
|
|
|
acdPortConfigState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the port."
|
|
::= { acdPortConfigEntry 6 }
|
|
|
|
acdPortConfigMtu OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured MTU of the port. The value ranges from 1518 to 10240."
|
|
::= { acdPortConfigEntry 7 }
|
|
|
|
acdPortConfigAutoNegoState OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the auto negociation on the port."
|
|
::= { acdPortConfigEntry 8 }
|
|
|
|
acdPortConfigSpeed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured speed of the port in Mbps. The valid values are 10, 100,
|
|
1000 and 10000."
|
|
::= { acdPortConfigEntry 9 }
|
|
|
|
acdPortConfigDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
halfDuplex(1),
|
|
fullDuplex(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured duplex mode for this port."
|
|
::= { acdPortConfigEntry 10 }
|
|
|
|
acdPortConfigMdi OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
autoMdi(1),
|
|
mdi(2),
|
|
mdix(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured MDI mode for this port."
|
|
::= { acdPortConfigEntry 11 }
|
|
|
|
acdPortConfigPauseMode OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
disable(1),
|
|
local(2),
|
|
forward(3)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured pause mode for this port."
|
|
::= { acdPortConfigEntry 12 }
|
|
|
|
acdPortConfigAdvertisement OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bHalfDuplex10Mbps(0), -- Capable of Half Duplex 10Mbps
|
|
bFullDuplex10Mbps(1), -- Capable of Full Duplex 10Mbps
|
|
bHalfDuplex100Mbps(2), -- Capable of Half Duplex 100Mbps
|
|
bFullDuplex100Mbps(3), -- Capable of Full Duplex 100Mbps
|
|
bHalfDuplex1Gbps(4), -- Capable of Half Duplex 1Gbps
|
|
bFullDuplex1Gbps(5), -- Capable of Full Duplex 1Gbps
|
|
bPauseSymmetric(6), -- Capable of full-duplex pause
|
|
bPauseAsymmetric(7) -- Capable of asymetric pause
|
|
}
|
|
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "A value that identifies the set of port capabilities
|
|
to advertise during auto-negociation. Each bit indicates whether
|
|
or not the specific capability is valid on the system."
|
|
|
|
::= { acdPortConfigEntry 13 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- The port status table.
|
|
-------------------------------------------------------------------------------
|
|
|
|
acdPortStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table for port status"
|
|
::= { acdPortStatus 1 }
|
|
|
|
acdPortStatusEntry OBJECT-TYPE
|
|
SYNTAX AcdPortStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Port status."
|
|
INDEX { acdPortStatusIndex }
|
|
::= { acdPortStatusTable 1 }
|
|
|
|
|
|
AcdPortStatusEntry ::= SEQUENCE {
|
|
acdPortStatusIndex Unsigned32,
|
|
acdPortStatusSpeed Unsigned32,
|
|
acdPortStatusDuplex INTEGER,
|
|
acdPortStatusMdi INTEGER,
|
|
acdPortStatusTxPause TruthValue,
|
|
acdPortStatusRxPause TruthValue,
|
|
acdPortStatusLinkPartnerAbility BITS,
|
|
acdPortStatusLinkStatus TruthValue,
|
|
acdPortStatusMedia BITS,
|
|
acdPortStatusIsMonitor TruthValue,
|
|
acdPortStatusIsManagement TruthValue,
|
|
acdPortStatusIsSFP TruthValue,
|
|
acdPortStatusIsFiber TruthValue
|
|
}
|
|
|
|
acdPortStatusIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object uniquely identifies this acdPortStatus
|
|
entry."
|
|
::= { acdPortStatusEntry 1 }
|
|
|
|
acdPortStatusSpeed OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current speed of the port in Mbps. The valid values are 10, 100
|
|
1000 and 10000."
|
|
::= { acdPortStatusEntry 2 }
|
|
|
|
acdPortStatusDuplex OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
halfDuplex(1),
|
|
fullDuplex(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current duplex mode of the port."
|
|
::= { acdPortStatusEntry 3 }
|
|
|
|
acdPortStatusMdi OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
mdi(1),
|
|
mdix(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The current MDI mode of the port."
|
|
::= { acdPortStatusEntry 4 }
|
|
|
|
acdPortStatusTxPause OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not the port is transmitting pause frames."
|
|
::= { acdPortStatusEntry 5 }
|
|
|
|
acdPortStatusRxPause OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates whether or not the port is receiving pause frames."
|
|
::= { acdPortStatusEntry 6 }
|
|
|
|
acdPortStatusLinkPartnerAbility OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bHalfDuplex10Mbps(0), -- Capable of Half Duplex 10Mbps
|
|
bFullDuplex10Mbps(1), -- Capable of Full Duplex 10Mbps
|
|
bHalfDuplex100Mbps(2), -- Capable of Half Duplex 100Mbps
|
|
bFullDuplex100Mbps(3), -- Capable of Full Duplex 100Mbps
|
|
bHalfDuplex1Gbps(4), -- Capable of Half Duplex 1Gbps
|
|
bFullDuplex1Gbps(5), -- Capable of Full Duplex 1Gbps
|
|
bPauseSymmetric(6), -- Capable of full-duplex pause
|
|
bPauseAsymmetric(7) -- Capable of asymetric pause
|
|
}
|
|
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that identifies the set of port capabilities
|
|
advertised by the link partner. Each bit indicates whether
|
|
or not the specific capability is valid on the link partner
|
|
system."
|
|
|
|
::= { acdPortStatusEntry 7 }
|
|
|
|
acdPortStatusLinkStatus OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the port link is Up or Down.
|
|
Down(FALSE),
|
|
Up(TRUE)"
|
|
::= { acdPortStatusEntry 8 }
|
|
|
|
acdPortStatusMedia OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bOther(0), -- other or unknown
|
|
bAUI(1), -- AUI
|
|
b10base5(2), -- 10BASE-5
|
|
bFoirl(3), -- FOIRL
|
|
|
|
b10base2(4), -- 10BASE-2
|
|
b10baseT(5), -- 10BASE-T duplex mode unknown
|
|
b10baseFP(6), -- 10BASE-FP
|
|
b10baseFB(7), -- 10BASE-FB
|
|
b10baseFL(8), -- 10BASE-FL duplex mode unknown
|
|
b10broad36(9), -- 10BROAD36
|
|
b10baseTHD(10), -- 10BASE-T half duplex mode
|
|
b10baseTFD(11), -- 10BASE-T full duplex mode (Supported)
|
|
b10baseFLHD(12), -- 10BASE-FL half duplex mode
|
|
b10baseFLFD(13), -- 10BASE-FL full duplex mode
|
|
|
|
b100baseT4(14), -- 100BASE-T4
|
|
b100baseTXHD(15), -- 100BASE-TX half duplex mode
|
|
b100baseTXFD(16), -- 100BASE-TX full duplex mode (Supported)
|
|
b100baseFXHD(17), -- 100BASE-FX half duplex mode
|
|
b100baseFXFD(18), -- 100BASE-FX full duplex mode (Supported)
|
|
b100baseT2HD(19), -- 100BASE-T2 half duplex mode
|
|
b100baseT2FD(20), -- 100BASE-T2 full duplex mode
|
|
|
|
b1000baseXHD(21), -- 1000BASE-X half duplex mode
|
|
b1000baseXFD(22), -- 1000BASE-X full duplex mode (Supported)
|
|
b1000baseLXHD(23), -- 1000BASE-LX half duplex mode
|
|
b1000baseLXFD(24), -- 1000BASE-LX full duplex mode (Supported)
|
|
b1000baseSXHD(25), -- 1000BASE-SX half duplex mode
|
|
b1000baseSXFD(26), -- 1000BASE-SX full duplex mode (Supported)
|
|
b1000baseCXHD(27), -- 1000BASE-CX half duplex mode
|
|
b1000baseCXFD(28), -- 1000BASE-CX full duplex mode (Supported)
|
|
b1000baseTHD(29), -- 1000BASE-T half duplex mode
|
|
b1000baseTFD(30) -- 1000BASE-T full duplex mode (Supported - Copper SFP)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that uniquely identifies the selected media type."
|
|
::= { acdPortStatusEntry 9 }
|
|
|
|
acdPortStatusIsMonitor OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the port is a monitor port.
|
|
No(FALSE),
|
|
Yes(TRUE)"
|
|
::= { acdPortStatusEntry 10 }
|
|
|
|
acdPortStatusIsManagement OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the port is a management port.
|
|
No(FALSE),
|
|
Yes(TRUE)"
|
|
::= { acdPortStatusEntry 11 }
|
|
|
|
acdPortStatusIsSFP OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the port has an SFP.
|
|
No(FALSE),
|
|
Yes(TRUE)"
|
|
::= { acdPortStatusEntry 12 }
|
|
|
|
acdPortStatusIsFiber OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Indicates if the port is connected to fiber.
|
|
No(FALSE),
|
|
Yes(TRUE)"
|
|
::= { acdPortStatusEntry 13 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- The port transmit statistics table.
|
|
-- This table contains all port transmit statistics.
|
|
-------------------------------------------------------------------------------
|
|
|
|
acdPortTxStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdPortTxStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of port transmit statistics"
|
|
::= { acdPortStats 1 }
|
|
|
|
acdPortTxStatsEntry OBJECT-TYPE
|
|
SYNTAX AcdPortTxStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port transmit statistics."
|
|
INDEX { acdPortTxStatsIndex }
|
|
::= { acdPortTxStatsTable 1 }
|
|
|
|
|
|
AcdPortTxStatsEntry ::= SEQUENCE {
|
|
acdPortTxStatsIndex Unsigned32,
|
|
acdPortTxStatsSupportBits BITS,
|
|
acdPortTxStatsBytesGood Counter64,
|
|
acdPortTxStatsBytesTotal Counter64,
|
|
acdPortTxStatsUnicastPkts Counter64,
|
|
acdPortTxStatsMulticastPkts Counter64,
|
|
acdPortTxStatsBroadcastPkts Counter64,
|
|
acdPortTxStatsPauseFrames Counter64,
|
|
acdPortTxStatsTaggedFrames Counter64,
|
|
acdPortTxStatsCRCErrors Counter64,
|
|
acdPortTxStatsDeferred Counter64,
|
|
acdPortTxStatsExcessiveDeferrals Counter64,
|
|
acdPortTxStatsSingleCollisions Counter64,
|
|
acdPortTxStatsMultipleCollisions Counter64,
|
|
acdPortTxStatsExcessiveCollisions Counter64,
|
|
acdPortTxStatsLateCollisions Counter64,
|
|
acdPortTxStatsNormalCollisions Counter64,
|
|
acdPortTxStatsFifoErrors Counter64,
|
|
acdPortTxStatsPkts64 Counter64,
|
|
acdPortTxStatsPkts65to127 Counter64,
|
|
acdPortTxStatsPkts128to255 Counter64,
|
|
acdPortTxStatsPkts256to511 Counter64,
|
|
acdPortTxStatsPkts512to1023 Counter64,
|
|
acdPortTxStatsPkts1024to1518 Counter64,
|
|
acdPortTxStatsPkts1519to2047 Counter64,
|
|
acdPortTxStatsPkts2048to4095 Counter64,
|
|
acdPortTxStatsPkts4096to8191 Counter64,
|
|
acdPortTxStatsPkts8192andMore Counter64,
|
|
acdPortTxStatsPktsLarge Counter64
|
|
}
|
|
|
|
acdPortTxStatsIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object uniquely identifies this acdPortTxStats
|
|
entry."
|
|
::= { acdPortTxStatsEntry 1 }
|
|
|
|
acdPortTxStatsSupportBits OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bBytesGood(0), -- acdPortTxStatsBytesGood validity flag
|
|
bBytesTotal(1), -- acdPortTxStatsBytesTotal validity flag
|
|
bUnicastPkts(2), -- acdPortTxStatsUnicastPkts validity flag
|
|
bMulticastPkts(3), -- acdPortTxStatsMulticastPkts validity flag
|
|
bBroadcastPkts(4), -- acdPortTxStatsBroadcastPkts validity flag
|
|
bPauseFrames(5), -- acdPortTxStatsPauseFrames validity flag
|
|
bTaggedFrames(6), -- acdPortTxStatsTaggedFrames validity flag
|
|
bCRCErrors(7), -- acdPortTxStatsCRCErrors validity flag
|
|
bDeferred(8), -- acdPortTxStatsDeferred validity flag
|
|
bExcessiveDeferrals(9), -- acdPortTxStatsExcessiveDeferrals validity flag
|
|
bSingleCollisions(10), -- acdPortTxStatsSingleCollisions validity flag
|
|
bMultipleCollisions(11), -- acdPortTxStatsMultipleCollisions validity flag
|
|
bExcessiveCollisions(12),-- acdPortTxStatsExcessiveCollisions validity flag
|
|
bLateCollisions(13), -- acdPortTxStatsLateCollisions validity flag
|
|
bNormalCollisions(14), -- acdPortTxStatsNormalCollisions validity flag
|
|
bFifoErrors(15), -- acdPortTxStatsFifoErrors validity flag
|
|
bPkts64(16), -- acdPortTxStatsPkts64 validity flag
|
|
bPkts65to127(17), -- acdPortTxStatsPkts65to127 validity flag
|
|
bPkts128to255(18), -- acdPortTxStatsPkts128to255 validity flag
|
|
bPkts256to511(19), -- acdPortTxStatsPkts256to511 validity flag
|
|
bPkts512to1023(20), -- acdPortTxStatsPkts512to1023 validity flag
|
|
bPkts1024to1518(21), -- acdPortTxStatsPkts1024to1518 validity flag
|
|
bPkts1519to2047(22), -- acdPortTxStatsPkts1519to2047 validity flag
|
|
bPkts2048to4095(23), -- acdPortTxStatsPkts2048to4095 validity flag
|
|
bPkts4096to8191(24), -- acdPortTxStatsPkts4096to8191 validity flag
|
|
bPkts8192andMore(25), -- acdPortTxStatsPkts8192andMore validity flag
|
|
bPktsLarge(26) -- acdPortTxStatsPktsLarge validity flag
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that identifies the set of TX statistics
|
|
supported by the device. Each bit indicates whether
|
|
or not the specific statistic value is valid on the
|
|
system."
|
|
|
|
::= { acdPortTxStatsEntry 2 }
|
|
|
|
acdPortTxStatsBytesGood OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of bytes transmitted by the port
|
|
in good packets. The count includes the 4 CRC bytes but does not
|
|
include the preamble or SFD bytes. A good packet is one that has been
|
|
transmitted successfully (not aborted) with a good CRC. It is assumed
|
|
that all transmit packets are properly sized, 64 bytes (after any
|
|
padding) to maxsize bytes long."
|
|
::= { acdPortTxStatsEntry 3 }
|
|
|
|
acdPortTxStatsBytesTotal OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of bytes transmitted by the port
|
|
in good and bad packets. The count includes the 4 CRC bytes but does
|
|
not include the preamble or SFD bytes. Bad packets include normal
|
|
collisions, late collisions, and FIFO underflows. For collisions,
|
|
all bytes transmitted before the start of the collision as well as
|
|
the colliding and jam bytes are counted. For FIFO underflows, all
|
|
bytes actually transmitted are counted."
|
|
::= { acdPortTxStatsEntry 4 }
|
|
|
|
acdPortTxStatsUnicastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good unicast packets transmitted by this port.
|
|
Good unicast packets are packets that are not dropped and have a good
|
|
CRC. Unicast packets are identified by having a 0 in the least
|
|
significant bit of the first byte of the destination address (i.e.
|
|
the first bit transmitted is a 0)."
|
|
::= { acdPortTxStatsEntry 5 }
|
|
|
|
acdPortTxStatsMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good multicast packets transmitted by this
|
|
port (good means not dropped and valid CRC). Multicast packets are
|
|
identified by having a 1 in the least significant bit of the first
|
|
byte of the destination address (i.e. the first bit transmitted is
|
|
a 1). Broadcast packets are not included in this count."
|
|
::= { acdPortTxStatsEntry 6 }
|
|
|
|
acdPortTxStatsBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good broadcast packets transmitted by this
|
|
port (good means not dropped and valid CRC). Broadcast packets are
|
|
identified by a destination address of all 1."
|
|
::= { acdPortTxStatsEntry 7 }
|
|
|
|
acdPortTxStatsPauseFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good flow control pause packets transmitted
|
|
by this port (good means not dropped and valid CRC). Flow control
|
|
pause packets are identified by a type of 0x8808 and an opcode field
|
|
of 0x0001."
|
|
::= { acdPortTxStatsEntry 8 }
|
|
|
|
acdPortTxStatsTaggedFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good VLAN packets transmitted by this port
|
|
(good means not dropped and valid CRC). VLAN packets are identified
|
|
by a type field equal to 0x8100 in the outer VLAN tag."
|
|
::= { acdPortTxStatsEntry 9 }
|
|
|
|
acdPortTxStatsCRCErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the transmitted packets with a bad non-appended
|
|
CRC field. This count doesn't include any packets with a bad CRC due
|
|
to a FIFO underflow."
|
|
::= { acdPortTxStatsEntry 10 }
|
|
|
|
acdPortTxStatsDeferred OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of packets that were deferred on the
|
|
first transmit attempt due to the medium being busy. Packets with
|
|
subsequent deferrals (for instance, after a collision back off) are
|
|
not counted. Whether the packet is eventually transmitted successfully
|
|
or not is irrelevant to this counter. Packets dropped due to excess
|
|
deferral that occur during the initial transmit attempt are not
|
|
counted."
|
|
::= { acdPortTxStatsEntry 11 }
|
|
|
|
acdPortTxStatsExcessiveDeferrals OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of packets dropped by this port due to
|
|
excessive deferral. The deferral time starts at the beginning of each
|
|
transmission attempt and ends when the transmission starts (regardless
|
|
of collisions). The deferral is excessive if more than 3036 byte times
|
|
have passed without the transmission starting."
|
|
::= { acdPortTxStatsEntry 12 }
|
|
|
|
acdPortTxStatsSingleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of times a packet is successfully
|
|
transmitted from this port after experiencing a single collision.
|
|
This count does not include erroneous (dropped) packets."
|
|
::= { acdPortTxStatsEntry 13 }
|
|
|
|
acdPortTxStatsMultipleCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of times a packet is successfully
|
|
transmitted from this port after experiencing multiple collisions.
|
|
This count does not include erroneous (dropped) packets and also does
|
|
not include packets dropped due to excess collisions."
|
|
::= { acdPortTxStatsEntry 14 }
|
|
|
|
acdPortTxStatsExcessiveCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of packets dropped by this port due
|
|
to excess collisions (number of collisions equals MaxRetry+1). This
|
|
count does not include packets dropped due to FIFO underflow or
|
|
late collisions (even if the late collision is also an excessive
|
|
collision)."
|
|
::= { acdPortTxStatsEntry 15 }
|
|
|
|
acdPortTxStatsLateCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of packets dropped by this port due
|
|
to late collisions. A late collision is a collision that occurs
|
|
after the collision window time (normally 512-bit times). This count
|
|
does not include packets dropped due to FIFO underflow. Late
|
|
collisions are not retried."
|
|
::= { acdPortTxStatsEntry 16 }
|
|
|
|
acdPortTxStatsNormalCollisions OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of normal collisions that have
|
|
occurred on this port during all transmission attempts. FIFO
|
|
underflows, late collisions and collisions that occur while this
|
|
port is not trying to transmit are not counted. This count does not
|
|
include collisions during half-duplex back pressure."
|
|
::= { acdPortTxStatsEntry 17 }
|
|
|
|
acdPortTxStatsFifoErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of packets dropped by this port due to
|
|
an underflow in the transmit FIFO. When an underflow is detected,
|
|
transmission is immediately aborted after sending a known bad
|
|
(inverted) CRC sequence. The FIFO underflow error takes precedence
|
|
over all other errors if this counter is incremented, then none of
|
|
the other packet type counters are incremented."
|
|
::= { acdPortTxStatsEntry 18 }
|
|
|
|
acdPortTxStatsPkts64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were exactly 64 bytes in length (excluding preamble and SFD but
|
|
including CRC)."
|
|
::= { acdPortTxStatsEntry 19 }
|
|
|
|
acdPortTxStatsPkts65to127 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were 65 to 127 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortTxStatsEntry 20 }
|
|
|
|
acdPortTxStatsPkts128to255 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were 128 to 255 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortTxStatsEntry 21 }
|
|
|
|
acdPortTxStatsPkts256to511 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were 256 to 511 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortTxStatsEntry 22 }
|
|
|
|
acdPortTxStatsPkts512to1023 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were 512 to 1023 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortTxStatsEntry 23 }
|
|
|
|
acdPortTxStatsPkts1024to1518 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were 1024 to 1518 bytes in length (excluding preamble and SFD
|
|
but including CRC)."
|
|
::= { acdPortTxStatsEntry 24 }
|
|
|
|
acdPortTxStatsPkts1519to2047 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were 1519 to 2047 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortTxStatsEntry 25 }
|
|
|
|
acdPortTxStatsPkts2048to4095 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were 2048 to 4095 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortTxStatsEntry 26 }
|
|
|
|
acdPortTxStatsPkts4096to8191 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were 4096 to 8191 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortTxStatsEntry 27 }
|
|
|
|
acdPortTxStatsPkts8192andMore OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, transmitted by this port
|
|
that were greater than 8192 bytes in length (excluding preamble and
|
|
SFD but including CRC)."
|
|
::= { acdPortTxStatsEntry 28 }
|
|
|
|
acdPortTxStatsPktsLarge OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of large packets transmitted by this port. Define
|
|
the size of large packets on the Port configuration."
|
|
::= { acdPortTxStatsEntry 29 }
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- The port receive statistics table.
|
|
-- This table contains all port receive statistics.
|
|
-------------------------------------------------------------------------------
|
|
|
|
acdPortRxStatsTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AcdPortRxStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Table of port receive statistics"
|
|
::= { acdPortStats 2 }
|
|
|
|
acdPortRxStatsEntry OBJECT-TYPE
|
|
SYNTAX AcdPortRxStatsEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"port receive statistics."
|
|
INDEX { acdPortRxStatsIndex }
|
|
::= { acdPortRxStatsTable 1 }
|
|
|
|
|
|
AcdPortRxStatsEntry ::= SEQUENCE {
|
|
acdPortRxStatsIndex Unsigned32,
|
|
acdPortRxStatsSupportBits BITS,
|
|
acdPortRxStatsBytesGood Counter64,
|
|
acdPortRxStatsBytesTotal Counter64,
|
|
acdPortRxStatsShortOk Counter64,
|
|
acdPortRxStatsShortBad Counter64,
|
|
acdPortRxStatsLongOk Counter64,
|
|
acdPortRxStatsLongBad Counter64,
|
|
acdPortRxStatsUnicastPkts Counter64,
|
|
acdPortRxStatsMulticastPkts Counter64,
|
|
acdPortRxStatsBroadcastPkts Counter64,
|
|
acdPortRxStatsPauseFrames Counter64,
|
|
acdPortRxStatsTaggedFrames Counter64,
|
|
acdPortRxStatsCRCErrors Counter64,
|
|
acdPortRxStatsAlignErrors Counter64,
|
|
acdPortRxStatsRuntFrames Counter64,
|
|
acdPortRxStatsLengthErrors Counter64,
|
|
acdPortRxStatsFalseCRS Counter64,
|
|
acdPortRxStatsPhyErrors Counter64,
|
|
acdPortRxStatsFifoErrors Counter64,
|
|
acdPortRxStatsIgnored Counter64,
|
|
acdPortRxStatsBadOpcode Counter64,
|
|
acdPortRxStatsPkts64 Counter64,
|
|
acdPortRxStatsPkts65to127 Counter64,
|
|
acdPortRxStatsPkts128to255 Counter64,
|
|
acdPortRxStatsPkts256to511 Counter64,
|
|
acdPortRxStatsPkts512to1023 Counter64,
|
|
acdPortRxStatsPkts1024to1518 Counter64,
|
|
acdPortRxStatsPkts1519to2047 Counter64,
|
|
acdPortRxStatsPkts2048to4095 Counter64,
|
|
acdPortRxStatsPkts4096to8191 Counter64,
|
|
acdPortRxStatsPkts8192andMore Counter64,
|
|
acdPortRxStatsPktsLarge Counter64
|
|
}
|
|
|
|
acdPortRxStatsIndex OBJECT-TYPE
|
|
SYNTAX Unsigned32 (1..65535)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The value of this object uniquely identifies this acdPortRxStats
|
|
entry."
|
|
::= { acdPortRxStatsEntry 1 }
|
|
|
|
acdPortRxStatsSupportBits OBJECT-TYPE
|
|
SYNTAX BITS {
|
|
bBytesGood(0), -- acdPortRxStatsBytesGood validity flag
|
|
bBytesTotal(1), -- acdPortRxStatsBytesTotal validity flag
|
|
bRxStatsShortOk(2), -- acdPortRxStatsShortOkPkts validity flag
|
|
bRxStatsShortBad(3), -- acdPortRxStatsShortBadPkts validity flag
|
|
bRxStatsLongOk(4), -- acdPortRxStatsLongOkPkts validity flag
|
|
bRxStatsLongBad(5), -- acdPortRxStatsLongBadPkts validity flag
|
|
bUnicastPkts(6), -- acdPortRxStatsUnicastPkts validity flag
|
|
bMulticastPkts(7), -- acdPortRxStatsMulticastPkts validity flag
|
|
bBroadcastPkts(8), -- acdPortRxStatsBroadcastPkts validity flag
|
|
bPauseFrames(9), -- acdPortRxStatsPauseFrames validity flag
|
|
bTaggedFrames(10), -- acdPortRxStatsTaggedFrames validity flag
|
|
bCRCErrors(11), -- acdPortRxStatsCRCErrors validity flag
|
|
bAlignErrors(12), -- acdPortRxStatsAlignErrors validity flag
|
|
bRuntFrames(13), -- acdPortRxStatsRuntFrames validity flag
|
|
bLengthErrors(14), -- acdPortRxStatsLengthErrors validity flag
|
|
bFalseCRS(15), -- acdPortRxStatsFalseCRS validity flag
|
|
bPhyErrors(16), -- acdPortRxStatsPhyErrors validity flag
|
|
bFifoErrors(17), -- acdPortRxStatsFifoErrors validity flag
|
|
bIgnored(18), -- acdPortRxStatsIgnored validity flag
|
|
bBadOpcode(19), -- acdPortRxStatsBadOpCode validity flag
|
|
bPkts64(20), -- acdPortRxStatsPkts64 validity flag
|
|
bPkts65to127(21), -- acdPortRxStatsPkts65to127 validity flag
|
|
bPkts128to255(22), -- acdPortRxStatsPkts128to255 validity flag
|
|
bPkts256to511(23), -- acdPortRxStatsPkts256to511 validity flag
|
|
bPkts512to1023(24), -- acdPortRxStatsPkts512to1023 validity flag
|
|
bPkts1024to1518(25), -- acdPortRxStatsPkts1024to1518 validity flag
|
|
bPkts1519to2047(26), -- acdPortRxStatsPkts1519to2047 validity flag
|
|
bPkts2048to4095(27), -- acdPortRxStatsPkts2048to4095 validity flag
|
|
bPkts4096to8191(28), -- acdPortRxStatsPkts4096to8191 validity flag
|
|
bPkts8192andMore(29), -- acdPortRxStatsPkts8192andMore validity flag
|
|
bPktsLarge(30) -- acdPortRxStatsPktsLarge validity flag
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "A value that identifies the set of RX statistics
|
|
supported by the device. Each bit indicates whether
|
|
or not the specific statistic value is valid on the
|
|
system."
|
|
|
|
::= { acdPortRxStatsEntry 2 }
|
|
|
|
acdPortRxStatsBytesGood OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of bytes received by the port in
|
|
good packets. The count includes the 4 CRC bytes but does not include
|
|
the preamble or SFD bytes. A good packet is a well-formed normally
|
|
sized packet (64 to maxsize bytes) with good CRC and no PHY or FIFO
|
|
errors."
|
|
::= { acdPortRxStatsEntry 3 }
|
|
|
|
acdPortRxStatsBytesTotal OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Octets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the total number of bytes received by the port in
|
|
good and bad packets. The count includes the 4 CRC bytes (if present)
|
|
but does not include the preamble or SFD bytes. Good packets are
|
|
described above. Bad packets include short packets (less than 64
|
|
bytes), long packets (greater than maxsize bytes), packets with bad
|
|
CRC, packets with PHY errors, and packets with receive FIFO errors.
|
|
Bytes in bad packets resulting from a collision are counted if the
|
|
SFD is detected."
|
|
::= { acdPortRxStatsEntry 4 }
|
|
|
|
acdPortRxStatsShortOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of error-free packets received on this port that are
|
|
shorter than 64 bytes. A packet is error-free if it has a valid CRC,
|
|
no PHY errorsand no FIFO errors."
|
|
::= { acdPortRxStatsEntry 5 }
|
|
|
|
acdPortRxStatsShortBad OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of packets received on this port that are shorter
|
|
than 64 bytes and have a bad CRC. Packets with PHY or FIFO errors
|
|
are not counted."
|
|
::= { acdPortRxStatsEntry 6 }
|
|
|
|
acdPortRxStatsLongOk OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of error-free packets received on this port that
|
|
are longer than maxsize bytes. A packet is error-free if it has a
|
|
valid CRC, no PHY errors and no FIFO errors."
|
|
::= { acdPortRxStatsEntry 7 }
|
|
|
|
acdPortRxStatsLongBad OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of packets received on this port that are longer
|
|
than 64 bytes and have a bad CRC. Packets with PHY or FIFO errors
|
|
are not counted."
|
|
::= { acdPortRxStatsEntry 8 }
|
|
|
|
acdPortRxStatsUnicastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good unicast packets received by this port.
|
|
A good unicast packet is a normally sized packet (64 to maxsize
|
|
bytes) that is received without error a good CRC, no PHY or FIFO
|
|
errors. Unicast packets are identified by having a 0 in the least
|
|
significant bit of the first byte of the destination address (i.e.
|
|
the first bit received is a 0)."
|
|
::= { acdPortRxStatsEntry 9 }
|
|
|
|
acdPortRxStatsMulticastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good multicast packets received by this port.
|
|
A good multicast packet is a normally sized packet (64 to maxsize
|
|
bytes) that is received without error, a good CRC, no PHY or FIFO
|
|
errors. Multicast packets are identified by having a 1 in the least
|
|
significant bit of the first byte of the destination address (i.e.
|
|
the first bit received is a 1). Broadcast packets are not included
|
|
in this count."
|
|
::= { acdPortRxStatsEntry 10 }
|
|
|
|
acdPortRxStatsBroadcastPkts OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good broadcast packets received by this port.
|
|
A good broadcast packet is a normally sized packet (64 to maxsize
|
|
bytes) that is received without error, a good CRC, no PHY or FIFO
|
|
errors. Broadcast packets are identified by a destination address
|
|
of all 1's."
|
|
::= { acdPortRxStatsEntry 11 }
|
|
|
|
acdPortRxStatsPauseFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good flow control pause packets received by
|
|
this port (good CRC, no PHY or FIFO errors, normally sized). Flow
|
|
control pause packets are identified by a type of 0x8808, and an
|
|
opcode field of 0x0001."
|
|
::= { acdPortRxStatsEntry 12 }
|
|
|
|
acdPortRxStatsTaggedFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good VLAN packets receive by this port
|
|
(good CRC, no PHY or FIFO errors, normally sized). VLAN packets
|
|
are identified by a type field equal to 0x8100 in the outer VLAN tag."
|
|
::= { acdPortRxStatsEntry 13 }
|
|
|
|
acdPortRxStatsCRCErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of normally sized packets (64 to maxsize bytes)
|
|
received by this port with a CRC error but not a dribbling nibble
|
|
(packet is an integral number of bytes long). Packets with FIFO or
|
|
PHY errors are not counted."
|
|
::= { acdPortRxStatsEntry 14 }
|
|
|
|
acdPortRxStatsAlignErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of normally sized packets (64 to maxsize bytes)
|
|
received by this port with a CRC error and a dribbling nibble (packet
|
|
is not an integral number of bytes long). Packets with PHY or FIFO
|
|
errors are not counted."
|
|
::= { acdPortRxStatsEntry 15 }
|
|
|
|
acdPortRxStatsRuntFrames OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of receive packets (or events)
|
|
detected by this port without SDF detection but with carrier
|
|
assertion. Packets with valid SFD but no data bytes are also
|
|
counted as runts. After detecting a runt packet, the update of
|
|
the RxRunts counter is held off until the next valid packet is
|
|
received. If multiple runt packets occur between valid packets,
|
|
the RxRunts counter is incremented only once."
|
|
::= { acdPortRxStatsEntry 16 }
|
|
|
|
acdPortRxStatsLengthErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of good packets received by this
|
|
port with a length field check error. A length check error occurs
|
|
when the value in the length field is within the valid range for
|
|
data length (3-1500 bytes) but does not match the actual data
|
|
length of the packet. Length field values less than 46 bytes
|
|
(which corresponds to the minimum legal packet size of 64 bytes)
|
|
are not checked due to padding."
|
|
::= { acdPortRxStatsEntry 17 }
|
|
|
|
acdPortRxStatsFalseCRS OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of receive packets (or events)
|
|
detected by this port with a false carrier (SSD1 not followed by
|
|
SSD2). After detecting a false carrier, update of the RxFalseCRS
|
|
counter is held off until the next valid packet is received. If
|
|
multiple false carrier events occur between valid packets, the
|
|
RxFalseCRS counter is incremented only once."
|
|
::= { acdPortRxStatsEntry 18 }
|
|
|
|
acdPortRxStatsPhyErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of packets received by this port with
|
|
RX_ER asserted during reception (while RX_DV asserted). Packets with
|
|
a FIFO error are not counted."
|
|
::= { acdPortRxStatsEntry 19 }
|
|
|
|
acdPortRxStatsFifoErrors OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of receive packets dropped or aborted
|
|
due to receive FIFO overflow. The FIFO overflow error takes precedence
|
|
over all other errors - if this counter is incremented, then none of
|
|
the other packet type counters is incremented."
|
|
::= { acdPortRxStatsEntry 20 }
|
|
|
|
acdPortRxStatsIgnored OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the number of received packets that have been
|
|
ignored by this port. A packet is ignored if it violates the
|
|
programmed preamble rules or it violates the minimum data gap. The
|
|
preamble rules include long preamble enforcement (greater than 23
|
|
nibbles) and pure preamble enforcement (only 55h bytes). The minimum
|
|
data gap is the time between packet data transfers and is measured
|
|
from immediately after the last CRC byte of the previous packet
|
|
through the SFD field of the current packet. The normal data gap
|
|
is 20 bytes long (12 bytes of IPG and 8 bytes of preamble/SFD).
|
|
The enforcement limit is set to 10 bytes (half the normal gap
|
|
length)."
|
|
::= { acdPortRxStatsEntry 21 }
|
|
|
|
acdPortRxStatsBadOpcode OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is a count of the good control packets received by this port
|
|
(good CRC, no PHY or FIFO errors, normally sized) with an unknown
|
|
opcode. Unknown control packets are identified by a type field of
|
|
88-08 and an opcode field not equal to 00-01."
|
|
::= { acdPortRxStatsEntry 22 }
|
|
|
|
acdPortRxStatsPkts64 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port
|
|
that were exactly 64 bytes in length (excluding preamble and SFD
|
|
but including CRC)."
|
|
::= { acdPortRxStatsEntry 23 }
|
|
|
|
acdPortRxStatsPkts65to127 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port that
|
|
were 65 to 127 bytes in length inclusive (excluding preamble and SFD
|
|
but including CRC)."
|
|
::= { acdPortRxStatsEntry 24 }
|
|
|
|
acdPortRxStatsPkts128to255 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port
|
|
that were 128 to 255 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortRxStatsEntry 25 }
|
|
|
|
acdPortRxStatsPkts256to511 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port
|
|
that were 256 to 511 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortRxStatsEntry 26 }
|
|
|
|
acdPortRxStatsPkts512to1023 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port
|
|
that were 512 to 1023 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortRxStatsEntry 27 }
|
|
|
|
acdPortRxStatsPkts1024to1518 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port
|
|
that were 1024 to 1518 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortRxStatsEntry 28 }
|
|
|
|
acdPortRxStatsPkts1519to2047 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port
|
|
that were 1519 to 2047 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortRxStatsEntry 29 }
|
|
|
|
acdPortRxStatsPkts2048to4095 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port
|
|
that were 2048 to 4095 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortRxStatsEntry 30 }
|
|
|
|
acdPortRxStatsPkts4096to8191 OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port
|
|
that were 4096 to 8191 bytes in length inclusive (excluding preamble
|
|
and SFD but including CRC)."
|
|
::= { acdPortRxStatsEntry 31 }
|
|
|
|
acdPortRxStatsPkts8192andMore OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of packets, good or bad, received by this port that
|
|
were greater than 8192 bytes in length (excluding preamble and SFD
|
|
but including CRC)."
|
|
::= { acdPortRxStatsEntry 32 }
|
|
|
|
acdPortRxStatsPktsLarge OBJECT-TYPE
|
|
SYNTAX Counter64
|
|
UNITS "Packets"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The total number of large packets received by this port. Define the
|
|
size of large packets on the Port configuration page."
|
|
::= { acdPortRxStatsEntry 33 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Port Transaction ID Information
|
|
---------------------------------------------------------------------------
|
|
|
|
acdPortConfigTableLastChangeTid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This is the transaction ID of the last change of the acdPortConfigTable
|
|
table. If this value is different since the last read this is indicate
|
|
a table change."
|
|
::= { acdPortTableTid 1 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- ACD-PORT-MIB Module - Conformance Information
|
|
---------------------------------------------------------------------------
|
|
|
|
acdPortCompliances OBJECT IDENTIFIER ::= { acdPortConformance 1 }
|
|
acdPortGroups OBJECT IDENTIFIER ::= { acdPortConformance 2 }
|
|
|
|
---------------------------------------------------------------------------
|
|
-- Units of conformance
|
|
---------------------------------------------------------------------------
|
|
|
|
acdPortConfigGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdPortConfigName,
|
|
acdPortConfigAlias,
|
|
acdPortConfigMacAddress,
|
|
acdPortConfigConnectorId,
|
|
acdPortConfigState,
|
|
acdPortConfigMtu,
|
|
acdPortConfigAutoNegoState,
|
|
acdPortConfigSpeed,
|
|
acdPortConfigDuplex,
|
|
acdPortConfigMdi,
|
|
acdPortConfigPauseMode,
|
|
acdPortConfigAdvertisement
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { acdPortGroups 1 }
|
|
|
|
acdPortStatusGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdPortStatusSpeed,
|
|
acdPortStatusDuplex,
|
|
acdPortStatusMdi,
|
|
acdPortStatusTxPause,
|
|
acdPortStatusRxPause,
|
|
acdPortStatusLinkPartnerAbility,
|
|
acdPortStatusLinkStatus,
|
|
acdPortStatusMedia,
|
|
acdPortStatusIsMonitor,
|
|
acdPortStatusIsManagement,
|
|
acdPortStatusIsSFP,
|
|
acdPortStatusIsFiber
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { acdPortGroups 2 }
|
|
|
|
acdPortTxStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdPortTxStatsSupportBits,
|
|
acdPortTxStatsBytesGood,
|
|
acdPortTxStatsBytesTotal,
|
|
acdPortTxStatsUnicastPkts,
|
|
acdPortTxStatsMulticastPkts,
|
|
acdPortTxStatsBroadcastPkts,
|
|
acdPortTxStatsPauseFrames,
|
|
acdPortTxStatsTaggedFrames,
|
|
acdPortTxStatsCRCErrors,
|
|
acdPortTxStatsDeferred,
|
|
acdPortTxStatsExcessiveDeferrals,
|
|
acdPortTxStatsSingleCollisions,
|
|
acdPortTxStatsMultipleCollisions,
|
|
acdPortTxStatsExcessiveCollisions,
|
|
acdPortTxStatsLateCollisions,
|
|
acdPortTxStatsNormalCollisions,
|
|
acdPortTxStatsFifoErrors,
|
|
acdPortTxStatsPkts64,
|
|
acdPortTxStatsPkts65to127,
|
|
acdPortTxStatsPkts128to255,
|
|
acdPortTxStatsPkts256to511,
|
|
acdPortTxStatsPkts512to1023,
|
|
acdPortTxStatsPkts1024to1518,
|
|
acdPortTxStatsPkts1519to2047,
|
|
acdPortTxStatsPkts2048to4095,
|
|
acdPortTxStatsPkts4096to8191,
|
|
acdPortTxStatsPkts8192andMore,
|
|
acdPortTxStatsPktsLarge
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { acdPortGroups 3 }
|
|
|
|
acdPortRxStatsGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdPortRxStatsSupportBits,
|
|
acdPortRxStatsBytesGood,
|
|
acdPortRxStatsBytesTotal,
|
|
acdPortRxStatsShortOk,
|
|
acdPortRxStatsShortBad,
|
|
acdPortRxStatsLongOk,
|
|
acdPortRxStatsLongBad,
|
|
acdPortRxStatsUnicastPkts,
|
|
acdPortRxStatsMulticastPkts,
|
|
acdPortRxStatsBroadcastPkts,
|
|
acdPortRxStatsPauseFrames,
|
|
acdPortRxStatsTaggedFrames,
|
|
acdPortRxStatsCRCErrors,
|
|
acdPortRxStatsAlignErrors,
|
|
acdPortRxStatsRuntFrames,
|
|
acdPortRxStatsLengthErrors,
|
|
acdPortRxStatsFalseCRS,
|
|
acdPortRxStatsPhyErrors,
|
|
acdPortRxStatsFifoErrors,
|
|
acdPortRxStatsIgnored,
|
|
acdPortRxStatsBadOpcode,
|
|
acdPortRxStatsPkts64,
|
|
acdPortRxStatsPkts65to127,
|
|
acdPortRxStatsPkts128to255,
|
|
acdPortRxStatsPkts256to511,
|
|
acdPortRxStatsPkts512to1023,
|
|
acdPortRxStatsPkts1024to1518,
|
|
acdPortRxStatsPkts1519to2047,
|
|
acdPortRxStatsPkts2048to4095,
|
|
acdPortRxStatsPkts4096to8191,
|
|
acdPortRxStatsPkts8192andMore,
|
|
acdPortRxStatsPktsLarge
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"."
|
|
::= { acdPortGroups 4 }
|
|
|
|
acdPortTidGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
acdPortConfigTableLastChangeTid
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"List of scalars to monitior changes in tables."
|
|
::= { acdPortGroups 5 }
|
|
|
|
acdPortCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for support of the ACD-PORT-MIB module."
|
|
MODULE
|
|
MANDATORY-GROUPS {
|
|
acdPortConfigGroup,
|
|
acdPortStatusGroup,
|
|
acdPortTxStatsGroup,
|
|
acdPortRxStatsGroup,
|
|
acdPortTidGroup
|
|
}
|
|
|
|
::= { acdPortCompliances 1 }
|
|
|
|
END
|
|
|