mibs/MIBS/nokia/aos7/ALCATEL-IND1-IPRM-MIB

676 lines
20 KiB
Plaintext
Raw Normal View History

2023-12-05 12:25:34 +01:00
ALCATEL-IND1-IPRM-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE,
IpAddress, Integer32, Unsigned32
FROM SNMPv2-SMI
RowStatus,TEXTUAL-CONVENTION
FROM SNMPv2-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
IANAipRouteProtocol
FROM IANA-RTPROTO-MIB
routingIND1Iprm
FROM ALCATEL-IND1-BASE ;
alcatelIND1IPRMMIB MODULE-IDENTITY
LAST-UPDATED "201212010000Z"
ORGANIZATION "Alcatel-Lucent"
CONTACT-INFO
"Please consult with Customer Service to ensure the most appropriate
version of this document is used with the products in question:
Alcatel-Lucent, Enterprise Solutions Division
(Formerly Alcatel Internetworking, Incorporated)
26801 West Agoura Road
Agoura Hills, CA 91301-5122
United States Of America
Telephone: North America +1 800 995 2696
Latin America +1 877 919 9526
Europe +31 23 556 0100
Asia +65 394 7933
All Other +1 818 878 4507
Electronic Mail: support@ind.alcatel.com
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
DESCRIPTION
"This module describes an authoritative enterprise-specific Simple
Network Management Protocol (SNMP) Management Information Base (MIB):
This proprietary MIB contains management information for
the configuration of IPRM global configuration parameters.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect, special, or
consequential damages whatsoever arising from or related to this
document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2010 Alcatel-Lucent
ALL RIGHTS RESERVED WORLDWIDE"
REVISION "201002220000Z"
DESCRIPTION
"The latest version of this MIB Module."
::= { routingIND1Iprm 1 }
alcatelIND1IPRMMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIB 1 }
alaIprmConfig OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIBObjects 1 }
-- Textual Conventions
AlaIprmAdminStatus ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
" Admin status"
SYNTAX INTEGER { enabled(1),
disabled(2)
}
AlaIprmStaticRouteTypes ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A mechanism for distinguishing the type of static route"
SYNTAX INTEGER {
regular(1),
recursive(2),
bfdEnabled(3),
interface(4)
}
AlaMplsL3VpnRouteType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to define the type of a route target usage.
Route targets can be specified to be imported,
exported, or both. For a complete definition of a
route target, see [RFC4364]."
REFERENCE
"[RFC4364]"
SYNTAX INTEGER { import(1), export(2), both(3) }
AlaIprmRtPrefType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Used to define the various types of routes along with their
route preference values"
SYNTAX INTEGER {
local(1),
static(2),
ospf(3),
rip(4),
bgpExternal(5),
bgpInternal(6),
isisl1(7),
isisl2(8),
import(9)
}
-- Route Table
alaIprmRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPRM's Routing table."
::= { alaIprmConfig 1 }
alaIprmRouteEntry OBJECT-TYPE
SYNTAX AlaIprmRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A particular route to a particular destination"
INDEX {
alaIprmRouteDest,
alaIprmRouteMask,
alaIprmRouteTos,
alaIprmRouteNextHop
}
::= { alaIprmRouteTable 1 }
AlaIprmRouteEntry ::=
SEQUENCE {
alaIprmRouteDest
IpAddress,
alaIprmRouteMask
IpAddress,
alaIprmRouteTos
Integer32,
alaIprmRouteNextHop
IpAddress,
alaIprmRouteProto
IANAipRouteProtocol,
alaIprmRouteMetric
Integer32,
alaIprmRoutePriority
Integer32
}
alaIprmRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { alaIprmRouteEntry 1 }
alaIprmRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask of this route"
::= { alaIprmRouteEntry 2 }
alaIprmRouteTos OBJECT-TYPE
SYNTAX Integer32 (0..16)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TOS for this route"
::= { alaIprmRouteEntry 3 }
alaIprmRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Gateway for this route"
::= { alaIprmRouteEntry 4 }
alaIprmRouteProto OBJECT-TYPE
SYNTAX IANAipRouteProtocol
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The protocol that this route was learned from"
::= { alaIprmRouteEntry 5 }
alaIprmRouteMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The metric for this route"
::= { alaIprmRouteEntry 6 }
alaIprmRoutePriority OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The priority for this route"
::= { alaIprmRouteEntry 7 }
-- Static Route Table
alaIprmStaticRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"IPRM's Static Route table."
::= { alaIprmConfig 2 }
alaIprmStaticRouteEntry OBJECT-TYPE
SYNTAX AlaIprmStaticRouteEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A route entered by the user"
INDEX {
alaIprmStaticRouteDest,
alaIprmStaticRouteMask,
alaIprmStaticRouteNextHop
}
::= { alaIprmStaticRouteTable 1 }
AlaIprmStaticRouteEntry ::=
SEQUENCE {
alaIprmStaticRouteDest
IpAddress,
alaIprmStaticRouteMask
IpAddress,
alaIprmStaticRouteNextHop
IpAddress,
alaIprmStaticRouteMetric
Integer32,
alaIprmStaticRouteStatus
RowStatus,
alaIprmStaticRouteBfdStatus
AlaIprmAdminStatus,
alaIprmStaticRouteType
AlaIprmStaticRouteTypes,
alaIprmStaticRouteTag
Unsigned32,
alaIprmStaticRouteName
SnmpAdminString
}
alaIprmStaticRouteDest OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The destination IP address of this route."
::= { alaIprmStaticRouteEntry 1 }
alaIprmStaticRouteMask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The mask of this route"
::= { alaIprmStaticRouteEntry 2 }
alaIprmStaticRouteNextHop OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The Gateway for this route"
::= { alaIprmStaticRouteEntry 3 }
alaIprmStaticRouteMetric OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The metric for this route"
::= { alaIprmStaticRouteEntry 4 }
alaIprmStaticRouteStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The status of this entry. Enabling causes a new
static route to be created, disabled causes that
static route to be deleted."
::= { alaIprmStaticRouteEntry 5 }
alaIprmStaticRouteBfdStatus OBJECT-TYPE
SYNTAX AlaIprmAdminStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"For enabling or disabling the BFD status on this static route."
::= { alaIprmStaticRouteEntry 6 }
alaIprmStaticRouteType OBJECT-TYPE
SYNTAX AlaIprmStaticRouteTypes
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Type of static route."
::= { alaIprmStaticRouteEntry 7 }
alaIprmStaticRouteTag OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Tag associated with static route."
::= { alaIprmStaticRouteEntry 8 }
alaIprmStaticRouteName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A comment associated with the static route."
::= { alaIprmStaticRouteEntry 9 }
-- BFD status for all static routes
alaIprmStaticAllBfd OBJECT-TYPE
SYNTAX AlaIprmAdminStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"For attempting to enable/disable the BFD state on all static routes."
DEFVAL { disabled }
::= { alaIprmConfig 3 }
-- Primary Address
alaIprmPrimaryAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the Primary IP Address of this Router."
::= { alaIprmConfig 4 }
-- Router ID
alaIprmRouterId OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Defines the Router-id for this Router."
::= {alaIprmConfig 5 }
-- Route Distinguisher
alaIprmRouteDistinguisher OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (3..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Associates a route distinguisher to a VRF. Syntax for a route distinguisher and route target
as defined in [RFC4364]."
::= { alaIprmConfig 6 }
-- Route Target Table
alaIprmRouteTargetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmRouteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies per-VRF route target association.
Each entry identifies a connectivity policy supported
as part of a VPN."
::= { alaIprmConfig 7 }
alaIprmRouteTargetEntry OBJECT-TYPE
SYNTAX AlaIprmRouteTargetEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created by an LSR for
each route target configured for a VRF supporting
a MPLS L3VPN instance. See [RFC4364] for a
complete definition of a route target."
INDEX {
alaIprmRouteTarget
}
::= { alaIprmRouteTargetTable 1 }
AlaIprmRouteTargetEntry ::= SEQUENCE {
alaIprmRouteTarget SnmpAdminString,
alaIprmRouteTargetType AlaMplsL3VpnRouteType,
alaIprmRouteTargetRowStatus RowStatus
}
alaIprmRouteTarget OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (3..32))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A Virtual Router Route Target. Syntax for a route distinguisher and route target
as defined in [RFC4364]."
::= { alaIprmRouteTargetEntry 1 }
alaIprmRouteTargetType OBJECT-TYPE
SYNTAX AlaMplsL3VpnRouteType
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The route target distribution type."
::= { alaIprmRouteTargetEntry 2 }
alaIprmRouteTargetRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { alaIprmRouteTargetEntry 3 }
-- Route Preference Table
alaIprmRtPrefTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmRtPrefTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies the route preference values for
various types of routes."
::= { alaIprmConfig 8 }
alaIprmRtPrefTableEntry OBJECT-TYPE
SYNTAX AlaIprmRtPrefTableEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry is in this table for each route preference type."
INDEX {
alaIprmRtPrefEntryType
}
::= { alaIprmRtPrefTable 1 }
AlaIprmRtPrefTableEntry ::= SEQUENCE {
alaIprmRtPrefEntryType AlaIprmRtPrefType,
alaIprmRtPrefEntryValue Integer32
}
alaIprmRtPrefEntryType OBJECT-TYPE
SYNTAX AlaIprmRtPrefType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of route (associated with a route preference value)"
::= { alaIprmRtPrefTableEntry 1 }
alaIprmRtPrefEntryValue OBJECT-TYPE
SYNTAX Integer32 (1..255)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The route preference value used for this type of route."
::= { alaIprmRtPrefTableEntry 2 }
-- Route Leaking Export route-map
alaIprmExportRouteMap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A route-map index representing the route-map used to filter
routes exported to the Global Route Table. A value of -1 indicates
no routes should be exported. A value of 0 indicates all routes
should be exported. Otherwise, the value is the route-map index to
use for filtering."
::= { alaIprmConfig 9 }
-- Route Leaking Import Vrf Table
alaIprmImportVrfTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmImportVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies VRFs to import routes from."
::= { alaIprmConfig 10 }
alaIprmImportVrfEntry OBJECT-TYPE
SYNTAX AlaIprmImportVrfEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for each VRF
to import routes from."
INDEX {
alaIprmImportVrfName
}
::= { alaIprmImportVrfTable 1 }
AlaIprmImportVrfEntry ::= SEQUENCE {
alaIprmImportVrfName SnmpAdminString,
alaIprmImportVrfRouteMap Integer32,
alaIprmImportVrfRowStatus RowStatus
}
alaIprmImportVrfName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..20))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the VRF that routes should be imported from. An
empty string indicates the default VRF."
::= { alaIprmImportVrfEntry 1 }
alaIprmImportVrfRouteMap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A route-map index representing the route-map used to filter
imported routes."
::= { alaIprmImportVrfEntry 2 }
alaIprmImportVrfRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { alaIprmImportVrfEntry 3 }
-- Route Leaking Import Isid Table
alaIprmImportIsidTable OBJECT-TYPE
SYNTAX SEQUENCE OF AlaIprmImportIsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table specifies ISIS L3VPN ISIDs to import routes from."
::= { alaIprmConfig 11 }
alaIprmImportIsidEntry OBJECT-TYPE
SYNTAX AlaIprmImportIsidEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in this table is created for each ISID
to import routes from."
INDEX {
alaIprmImportIsid
}
::= { alaIprmImportIsidTable 1 }
AlaIprmImportIsidEntry ::= SEQUENCE {
alaIprmImportIsid Unsigned32,
alaIprmImportIsidRouteMap Integer32,
alaIprmImportIsidRowStatus RowStatus
}
alaIprmImportIsid OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ISIS SPB L3VPN ISID that routes should be imported from."
::= { alaIprmImportIsidEntry 1 }
alaIprmImportIsidRouteMap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A route-map index representing the route-map used to filter
imported routes."
::= { alaIprmImportIsidEntry 2 }
alaIprmImportIsidRowStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This variable is used to create, modify, and/or
delete a row in this table."
::= { alaIprmImportIsidEntry 3 }
-- Route Leaking Export All route-map
alaIprmExportToAllVrfsRouteMap OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Used to export routes to all other VRFs that don't already have
an entry in the Import Vrf Table. The object is a route-map index
representing the route-map used to filter the exported routes.
A value of -1 indicates no routes should be exported. A value of 0
indicates all routes should be exported. Otherwise, the value is
the route-map index to use for filtering."
::= { alaIprmConfig 12 }
-- conformance information
alcatelIND1IPRMMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIB 2 }
alcatelIND1IPRMMIBCompliances OBJECT IDENTIFIER ::=
{ alcatelIND1IPRMMIBConformance 1 }
alcatelIND1IPRMMIBGroups OBJECT IDENTIFIER ::=
{ alcatelIND1IPRMMIBConformance 2 }
-- compliance statements
alaIprmCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for routers running IPRM
and implementing the ALCATEL-IND1-IPRM MIB."
MODULE -- this module
MANDATORY-GROUPS { alaIprmConfigMIBGroup }
::= { alcatelIND1IPRMMIBCompliances 1 }
-- units of conformance
alaIprmConfigMIBGroup OBJECT-GROUP
OBJECTS { alaIprmRouteProto, alaIprmRouteMetric, alaIprmRoutePriority,
alaIprmStaticRouteMetric, alaIprmStaticRouteStatus,
alaIprmStaticRouteBfdStatus, alaIprmStaticRouteType,
alaIprmStaticRouteTag, alaIprmStaticRouteName,
alaIprmStaticAllBfd,
alaIprmPrimaryAddress, alaIprmRouterId,
alaIprmRouteDistinguisher, alaIprmRouteTargetType,
alaIprmRouteTargetRowStatus, alaIprmRtPrefEntryValue,
alaIprmExportRouteMap, alaIprmImportVrfRouteMap,
alaIprmImportVrfRowStatus, alaIprmImportIsidRouteMap,
alaIprmImportIsidRowStatus, alaIprmExportToAllVrfsRouteMap
}
STATUS current
DESCRIPTION
"A collection of objects to support management of global
configuration parameters of the IPRM Module."
::= { alcatelIND1IPRMMIBGroups 1 }
END