676 lines
20 KiB
Plaintext
676 lines
20 KiB
Plaintext
ALCATEL-IND1-IPRM-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
MODULE-IDENTITY, OBJECT-TYPE,
|
|
IpAddress, Integer32, Unsigned32
|
|
FROM SNMPv2-SMI
|
|
RowStatus,TEXTUAL-CONVENTION
|
|
FROM SNMPv2-TC
|
|
SnmpAdminString
|
|
FROM SNMP-FRAMEWORK-MIB
|
|
MODULE-COMPLIANCE, OBJECT-GROUP
|
|
FROM SNMPv2-CONF
|
|
IANAipRouteProtocol
|
|
FROM IANA-RTPROTO-MIB
|
|
routingIND1Iprm
|
|
FROM ALCATEL-IND1-BASE ;
|
|
|
|
alcatelIND1IPRMMIB MODULE-IDENTITY
|
|
|
|
LAST-UPDATED "201212010000Z"
|
|
ORGANIZATION "Alcatel-Lucent"
|
|
CONTACT-INFO
|
|
"Please consult with Customer Service to ensure the most appropriate
|
|
version of this document is used with the products in question:
|
|
|
|
Alcatel-Lucent, Enterprise Solutions Division
|
|
(Formerly Alcatel Internetworking, Incorporated)
|
|
26801 West Agoura Road
|
|
Agoura Hills, CA 91301-5122
|
|
United States Of America
|
|
|
|
Telephone: North America +1 800 995 2696
|
|
Latin America +1 877 919 9526
|
|
Europe +31 23 556 0100
|
|
Asia +65 394 7933
|
|
All Other +1 818 878 4507
|
|
|
|
Electronic Mail: support@ind.alcatel.com
|
|
World Wide Web: http://alcatel-lucent.com/wps/portal/enterprise
|
|
File Transfer Protocol: ftp://ftp.ind.alcatel.com/pub/products/mibs"
|
|
|
|
DESCRIPTION
|
|
"This module describes an authoritative enterprise-specific Simple
|
|
Network Management Protocol (SNMP) Management Information Base (MIB):
|
|
|
|
This proprietary MIB contains management information for
|
|
the configuration of IPRM global configuration parameters.
|
|
|
|
The right to make changes in specification and other information
|
|
contained in this document without prior notice is reserved.
|
|
|
|
No liability shall be assumed for any incidental, indirect, special, or
|
|
consequential damages whatsoever arising from or related to this
|
|
document or the information contained herein.
|
|
|
|
Vendors, end-users, and other interested parties are granted
|
|
non-exclusive license to use this specification in connection with
|
|
management of the products for which it is intended to be used.
|
|
|
|
Copyright (C) 1995-2010 Alcatel-Lucent
|
|
ALL RIGHTS RESERVED WORLDWIDE"
|
|
|
|
REVISION "201002220000Z"
|
|
DESCRIPTION
|
|
"The latest version of this MIB Module."
|
|
|
|
::= { routingIND1Iprm 1 }
|
|
|
|
alcatelIND1IPRMMIBObjects OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIB 1 }
|
|
|
|
alaIprmConfig OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIBObjects 1 }
|
|
|
|
|
|
-- Textual Conventions
|
|
|
|
AlaIprmAdminStatus ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
" Admin status"
|
|
SYNTAX INTEGER { enabled(1),
|
|
disabled(2)
|
|
}
|
|
|
|
AlaIprmStaticRouteTypes ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A mechanism for distinguishing the type of static route"
|
|
SYNTAX INTEGER {
|
|
regular(1),
|
|
recursive(2),
|
|
bfdEnabled(3),
|
|
interface(4)
|
|
}
|
|
|
|
|
|
AlaMplsL3VpnRouteType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to define the type of a route target usage.
|
|
Route targets can be specified to be imported,
|
|
exported, or both. For a complete definition of a
|
|
route target, see [RFC4364]."
|
|
REFERENCE
|
|
"[RFC4364]"
|
|
SYNTAX INTEGER { import(1), export(2), both(3) }
|
|
|
|
AlaIprmRtPrefType ::= TEXTUAL-CONVENTION
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to define the various types of routes along with their
|
|
route preference values"
|
|
SYNTAX INTEGER {
|
|
local(1),
|
|
static(2),
|
|
ospf(3),
|
|
rip(4),
|
|
bgpExternal(5),
|
|
bgpInternal(6),
|
|
isisl1(7),
|
|
isisl2(8),
|
|
import(9)
|
|
}
|
|
|
|
|
|
-- Route Table
|
|
|
|
alaIprmRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaIprmRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPRM's Routing table."
|
|
::= { alaIprmConfig 1 }
|
|
|
|
alaIprmRouteEntry OBJECT-TYPE
|
|
SYNTAX AlaIprmRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A particular route to a particular destination"
|
|
INDEX {
|
|
alaIprmRouteDest,
|
|
alaIprmRouteMask,
|
|
alaIprmRouteTos,
|
|
alaIprmRouteNextHop
|
|
}
|
|
::= { alaIprmRouteTable 1 }
|
|
|
|
AlaIprmRouteEntry ::=
|
|
SEQUENCE {
|
|
alaIprmRouteDest
|
|
IpAddress,
|
|
alaIprmRouteMask
|
|
IpAddress,
|
|
alaIprmRouteTos
|
|
Integer32,
|
|
alaIprmRouteNextHop
|
|
IpAddress,
|
|
alaIprmRouteProto
|
|
IANAipRouteProtocol,
|
|
alaIprmRouteMetric
|
|
Integer32,
|
|
alaIprmRoutePriority
|
|
Integer32
|
|
}
|
|
|
|
alaIprmRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { alaIprmRouteEntry 1 }
|
|
|
|
alaIprmRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of this route"
|
|
::= { alaIprmRouteEntry 2 }
|
|
|
|
alaIprmRouteTos OBJECT-TYPE
|
|
SYNTAX Integer32 (0..16)
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The TOS for this route"
|
|
::= { alaIprmRouteEntry 3 }
|
|
|
|
alaIprmRouteNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Gateway for this route"
|
|
::= { alaIprmRouteEntry 4 }
|
|
|
|
alaIprmRouteProto OBJECT-TYPE
|
|
SYNTAX IANAipRouteProtocol
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The protocol that this route was learned from"
|
|
::= { alaIprmRouteEntry 5 }
|
|
|
|
alaIprmRouteMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric for this route"
|
|
::= { alaIprmRouteEntry 6 }
|
|
|
|
alaIprmRoutePriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The priority for this route"
|
|
::= { alaIprmRouteEntry 7 }
|
|
|
|
|
|
-- Static Route Table
|
|
|
|
alaIprmStaticRouteTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaIprmStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"IPRM's Static Route table."
|
|
::= { alaIprmConfig 2 }
|
|
|
|
alaIprmStaticRouteEntry OBJECT-TYPE
|
|
SYNTAX AlaIprmStaticRouteEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A route entered by the user"
|
|
INDEX {
|
|
alaIprmStaticRouteDest,
|
|
alaIprmStaticRouteMask,
|
|
alaIprmStaticRouteNextHop
|
|
}
|
|
::= { alaIprmStaticRouteTable 1 }
|
|
|
|
AlaIprmStaticRouteEntry ::=
|
|
SEQUENCE {
|
|
alaIprmStaticRouteDest
|
|
IpAddress,
|
|
alaIprmStaticRouteMask
|
|
IpAddress,
|
|
alaIprmStaticRouteNextHop
|
|
IpAddress,
|
|
alaIprmStaticRouteMetric
|
|
Integer32,
|
|
alaIprmStaticRouteStatus
|
|
RowStatus,
|
|
alaIprmStaticRouteBfdStatus
|
|
AlaIprmAdminStatus,
|
|
alaIprmStaticRouteType
|
|
AlaIprmStaticRouteTypes,
|
|
alaIprmStaticRouteTag
|
|
Unsigned32,
|
|
alaIprmStaticRouteName
|
|
SnmpAdminString
|
|
}
|
|
|
|
alaIprmStaticRouteDest OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The destination IP address of this route."
|
|
::= { alaIprmStaticRouteEntry 1 }
|
|
|
|
alaIprmStaticRouteMask OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The mask of this route"
|
|
::= { alaIprmStaticRouteEntry 2 }
|
|
|
|
alaIprmStaticRouteNextHop OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The Gateway for this route"
|
|
::= { alaIprmStaticRouteEntry 3 }
|
|
|
|
alaIprmStaticRouteMetric OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The metric for this route"
|
|
::= { alaIprmStaticRouteEntry 4 }
|
|
|
|
alaIprmStaticRouteStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of this entry. Enabling causes a new
|
|
static route to be created, disabled causes that
|
|
static route to be deleted."
|
|
::= { alaIprmStaticRouteEntry 5 }
|
|
|
|
alaIprmStaticRouteBfdStatus OBJECT-TYPE
|
|
SYNTAX AlaIprmAdminStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For enabling or disabling the BFD status on this static route."
|
|
::= { alaIprmStaticRouteEntry 6 }
|
|
|
|
alaIprmStaticRouteType OBJECT-TYPE
|
|
SYNTAX AlaIprmStaticRouteTypes
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Type of static route."
|
|
::= { alaIprmStaticRouteEntry 7 }
|
|
|
|
alaIprmStaticRouteTag OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Tag associated with static route."
|
|
::= { alaIprmStaticRouteEntry 8 }
|
|
|
|
alaIprmStaticRouteName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE(0..32))
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A comment associated with the static route."
|
|
::= { alaIprmStaticRouteEntry 9 }
|
|
|
|
-- BFD status for all static routes
|
|
|
|
alaIprmStaticAllBfd OBJECT-TYPE
|
|
SYNTAX AlaIprmAdminStatus
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"For attempting to enable/disable the BFD state on all static routes."
|
|
DEFVAL { disabled }
|
|
::= { alaIprmConfig 3 }
|
|
|
|
|
|
|
|
-- Primary Address
|
|
|
|
alaIprmPrimaryAddress OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Primary IP Address of this Router."
|
|
::= { alaIprmConfig 4 }
|
|
|
|
|
|
|
|
-- Router ID
|
|
|
|
alaIprmRouterId OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Defines the Router-id for this Router."
|
|
::= {alaIprmConfig 5 }
|
|
|
|
|
|
-- Route Distinguisher
|
|
|
|
alaIprmRouteDistinguisher OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (3..32))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Associates a route distinguisher to a VRF. Syntax for a route distinguisher and route target
|
|
as defined in [RFC4364]."
|
|
::= { alaIprmConfig 6 }
|
|
|
|
|
|
-- Route Target Table
|
|
|
|
alaIprmRouteTargetTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaIprmRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies per-VRF route target association.
|
|
Each entry identifies a connectivity policy supported
|
|
as part of a VPN."
|
|
::= { alaIprmConfig 7 }
|
|
|
|
alaIprmRouteTargetEntry OBJECT-TYPE
|
|
SYNTAX AlaIprmRouteTargetEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created by an LSR for
|
|
each route target configured for a VRF supporting
|
|
a MPLS L3VPN instance. See [RFC4364] for a
|
|
complete definition of a route target."
|
|
INDEX {
|
|
alaIprmRouteTarget
|
|
}
|
|
::= { alaIprmRouteTargetTable 1 }
|
|
|
|
AlaIprmRouteTargetEntry ::= SEQUENCE {
|
|
alaIprmRouteTarget SnmpAdminString,
|
|
alaIprmRouteTargetType AlaMplsL3VpnRouteType,
|
|
alaIprmRouteTargetRowStatus RowStatus
|
|
}
|
|
|
|
alaIprmRouteTarget OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (3..32))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A Virtual Router Route Target. Syntax for a route distinguisher and route target
|
|
as defined in [RFC4364]."
|
|
::= { alaIprmRouteTargetEntry 1 }
|
|
|
|
alaIprmRouteTargetType OBJECT-TYPE
|
|
SYNTAX AlaMplsL3VpnRouteType
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route target distribution type."
|
|
::= { alaIprmRouteTargetEntry 2 }
|
|
|
|
alaIprmRouteTargetRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { alaIprmRouteTargetEntry 3 }
|
|
|
|
|
|
-- Route Preference Table
|
|
|
|
alaIprmRtPrefTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaIprmRtPrefTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies the route preference values for
|
|
various types of routes."
|
|
::= { alaIprmConfig 8 }
|
|
|
|
alaIprmRtPrefTableEntry OBJECT-TYPE
|
|
SYNTAX AlaIprmRtPrefTableEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry is in this table for each route preference type."
|
|
INDEX {
|
|
alaIprmRtPrefEntryType
|
|
}
|
|
::= { alaIprmRtPrefTable 1 }
|
|
|
|
AlaIprmRtPrefTableEntry ::= SEQUENCE {
|
|
alaIprmRtPrefEntryType AlaIprmRtPrefType,
|
|
alaIprmRtPrefEntryValue Integer32
|
|
}
|
|
|
|
alaIprmRtPrefEntryType OBJECT-TYPE
|
|
SYNTAX AlaIprmRtPrefType
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The type of route (associated with a route preference value)"
|
|
::= { alaIprmRtPrefTableEntry 1 }
|
|
|
|
alaIprmRtPrefEntryValue OBJECT-TYPE
|
|
SYNTAX Integer32 (1..255)
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The route preference value used for this type of route."
|
|
::= { alaIprmRtPrefTableEntry 2 }
|
|
|
|
-- Route Leaking Export route-map
|
|
|
|
alaIprmExportRouteMap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A route-map index representing the route-map used to filter
|
|
routes exported to the Global Route Table. A value of -1 indicates
|
|
no routes should be exported. A value of 0 indicates all routes
|
|
should be exported. Otherwise, the value is the route-map index to
|
|
use for filtering."
|
|
::= { alaIprmConfig 9 }
|
|
|
|
-- Route Leaking Import Vrf Table
|
|
|
|
alaIprmImportVrfTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaIprmImportVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies VRFs to import routes from."
|
|
::= { alaIprmConfig 10 }
|
|
|
|
alaIprmImportVrfEntry OBJECT-TYPE
|
|
SYNTAX AlaIprmImportVrfEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created for each VRF
|
|
to import routes from."
|
|
INDEX {
|
|
alaIprmImportVrfName
|
|
}
|
|
::= { alaIprmImportVrfTable 1 }
|
|
|
|
AlaIprmImportVrfEntry ::= SEQUENCE {
|
|
alaIprmImportVrfName SnmpAdminString,
|
|
alaIprmImportVrfRouteMap Integer32,
|
|
alaIprmImportVrfRowStatus RowStatus
|
|
}
|
|
|
|
alaIprmImportVrfName OBJECT-TYPE
|
|
SYNTAX SnmpAdminString (SIZE (0..20))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the VRF that routes should be imported from. An
|
|
empty string indicates the default VRF."
|
|
::= { alaIprmImportVrfEntry 1 }
|
|
|
|
alaIprmImportVrfRouteMap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A route-map index representing the route-map used to filter
|
|
imported routes."
|
|
::= { alaIprmImportVrfEntry 2 }
|
|
|
|
alaIprmImportVrfRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { alaIprmImportVrfEntry 3 }
|
|
|
|
-- Route Leaking Import Isid Table
|
|
|
|
alaIprmImportIsidTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF AlaIprmImportIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table specifies ISIS L3VPN ISIDs to import routes from."
|
|
::= { alaIprmConfig 11 }
|
|
|
|
alaIprmImportIsidEntry OBJECT-TYPE
|
|
SYNTAX AlaIprmImportIsidEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in this table is created for each ISID
|
|
to import routes from."
|
|
INDEX {
|
|
alaIprmImportIsid
|
|
}
|
|
::= { alaIprmImportIsidTable 1 }
|
|
|
|
AlaIprmImportIsidEntry ::= SEQUENCE {
|
|
alaIprmImportIsid Unsigned32,
|
|
alaIprmImportIsidRouteMap Integer32,
|
|
alaIprmImportIsidRowStatus RowStatus
|
|
}
|
|
|
|
alaIprmImportIsid OBJECT-TYPE
|
|
SYNTAX Unsigned32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The ISIS SPB L3VPN ISID that routes should be imported from."
|
|
::= { alaIprmImportIsidEntry 1 }
|
|
|
|
alaIprmImportIsidRouteMap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A route-map index representing the route-map used to filter
|
|
imported routes."
|
|
::= { alaIprmImportIsidEntry 2 }
|
|
|
|
alaIprmImportIsidRowStatus OBJECT-TYPE
|
|
SYNTAX RowStatus
|
|
MAX-ACCESS read-create
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This variable is used to create, modify, and/or
|
|
delete a row in this table."
|
|
::= { alaIprmImportIsidEntry 3 }
|
|
|
|
-- Route Leaking Export All route-map
|
|
|
|
alaIprmExportToAllVrfsRouteMap OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Used to export routes to all other VRFs that don't already have
|
|
an entry in the Import Vrf Table. The object is a route-map index
|
|
representing the route-map used to filter the exported routes.
|
|
A value of -1 indicates no routes should be exported. A value of 0
|
|
indicates all routes should be exported. Otherwise, the value is
|
|
the route-map index to use for filtering."
|
|
::= { alaIprmConfig 12 }
|
|
|
|
|
|
-- conformance information
|
|
|
|
alcatelIND1IPRMMIBConformance OBJECT IDENTIFIER ::= { alcatelIND1IPRMMIB 2 }
|
|
alcatelIND1IPRMMIBCompliances OBJECT IDENTIFIER ::=
|
|
{ alcatelIND1IPRMMIBConformance 1 }
|
|
alcatelIND1IPRMMIBGroups OBJECT IDENTIFIER ::=
|
|
{ alcatelIND1IPRMMIBConformance 2 }
|
|
|
|
-- compliance statements
|
|
|
|
alaIprmCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for routers running IPRM
|
|
and implementing the ALCATEL-IND1-IPRM MIB."
|
|
MODULE -- this module
|
|
MANDATORY-GROUPS { alaIprmConfigMIBGroup }
|
|
|
|
::= { alcatelIND1IPRMMIBCompliances 1 }
|
|
|
|
-- units of conformance
|
|
|
|
alaIprmConfigMIBGroup OBJECT-GROUP
|
|
OBJECTS { alaIprmRouteProto, alaIprmRouteMetric, alaIprmRoutePriority,
|
|
alaIprmStaticRouteMetric, alaIprmStaticRouteStatus,
|
|
alaIprmStaticRouteBfdStatus, alaIprmStaticRouteType,
|
|
alaIprmStaticRouteTag, alaIprmStaticRouteName,
|
|
alaIprmStaticAllBfd,
|
|
alaIprmPrimaryAddress, alaIprmRouterId,
|
|
alaIprmRouteDistinguisher, alaIprmRouteTargetType,
|
|
alaIprmRouteTargetRowStatus, alaIprmRtPrefEntryValue,
|
|
alaIprmExportRouteMap, alaIprmImportVrfRouteMap,
|
|
alaIprmImportVrfRowStatus, alaIprmImportIsidRouteMap,
|
|
alaIprmImportIsidRowStatus, alaIprmExportToAllVrfsRouteMap
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A collection of objects to support management of global
|
|
configuration parameters of the IPRM Module."
|
|
::= { alcatelIND1IPRMMIBGroups 1 }
|
|
|
|
|
|
END
|
|
|