david/mibs
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
98a672123c
mibs/MIBS/zte/ZTE-AN-SOFTWARE-MIB

1838 lines
77 KiB
Plaintext
Raw Normal View History

Initial commit
2023-12-05 12:25:34 +01:00
ZTE-AN-SOFTWARE-MIB DEFINITIONS ::= BEGIN
IMPORTS
DisplayString FROM SNMPv2-TC
DateAndTime FROM SNMPv2-TC
TruthValue FROM SNMPv2-TC
MODULE-IDENTITY FROM SNMPv2-SMI
OBJECT-TYPE FROM SNMPv2-SMI
Integer32 FROM SNMPv2-SMI
NOTIFICATION-TYPE FROM SNMPv2-SMI
zxAnSystem FROM ZTE-AN-SMI
MODULE-COMPLIANCE FROM SNMPv2-CONF
OBJECT-GROUP FROM SNMPv2-CONF
NOTIFICATION-GROUP FROM SNMPv2-CONF;
zxAnSoftwareMib MODULE-IDENTITY
LAST-UPDATED "201105260000Z"
ORGANIZATION "ZTE Corporation"
CONTACT-INFO "Zhou YuBin ZTE Corporation
Mail: zhou.yubing@zte.com.cn
Tel : +86-21-68897315"
DESCRIPTION "This MIB defines zte Access Node software management."
REVISION "201105260000Z"
DESCRIPTION
"Initial version of this MIB module."
::= { zxAnSystem 30 }
-------------------------------------------------------------------------------
-- Following management objects are defined.
-- 1. Card Running Software Information Table
-- 2. Subcard Running Software Information Table
-- 3. Saved Software Information Table
-- 4. Software Manual Update Management Table
-- 5. Software Manual Update Status Table
-- 6. Subcard Software Manual Update Status Table
-- 7. Software Automatic Update Check Management Table
-- 8. Software Automatic Update Management Table
-- 9. Software Swap Management Table
-- 10. Saved Patch Information Table
-- 11. Card Patch Running Status Information Table
-- 12. Subcard Running Patch Information Table
-- 13. Saved Patch Package Information Table
-- 14. Saved Patch Package File Information Table
-- Following notification objects are defined.
-- 21. Software Notification
-- Following conformance information is defined.
-- 31. Software Conformance
-------------------------------------------------------------------------------
zxAnSwObjects OBJECT IDENTIFIER ::= { zxAnSoftwareMib 2 }
zxAnSwNotifications OBJECT IDENTIFIER ::= { zxAnSoftwareMib 3 }
zxAnCardSwObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 2 }
zxAnSwUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 3 }
zxAnSwSwapObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 4 }
zxAnCardPatchObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 5 }
zxAnSwManualUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwUpdateObjects 2 }
zxAnSwManualUpdateGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwManualUpdateObjects 1 }
zxAnSwAutoUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwUpdateObjects 3 }
zxAnSwAutoUpdateGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateObjects 1 }
zxAnSwAutoUpdateChkObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateGlobalObjects 1 }
zxAnSwAutoUpdateOperObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateGlobalObjects 2 }
zxAnSwSwapGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwSwapObjects 1 }
zxAnSwAutoUpdateTraps OBJECT IDENTIFIER ::= { zxAnSwNotifications 1 }
-------------------------------------------------------------------------------
-- 1.Card Running Software Information Table
-------------------------------------------------------------------------------
zxAnSwCardRunningVerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwCardRunningVerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table includes the card version information."
::= { zxAnCardSwObjects 2 }
zxAnSwCardRunningVerEntry OBJECT-TYPE
SYNTAX ZxAnSwCardRunningVerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in zxAnCardTable."
INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot }
::= { zxAnSwCardRunningVerTable 1 }
ZxAnSwCardRunningVerEntry ::= SEQUENCE {
zxAnSwCardRack Integer32,
zxAnSwCardShelf Integer32,
zxAnSwCardSlot Integer32,
zxAnSwCardFileName DisplayString,
zxAnSwCardFileType DisplayString,
zxAnSwCardVersion DisplayString,
zxAnSwCardFileLen Integer32,
zxAnSwCardBuildTime DateAndTime,
zxAnSwCardBootwareFileName DisplayString,
zxAnSwCardBootwareFileType DisplayString,
zxAnSwCardBootwareVersion DisplayString,
zxAnSwCardBootwareFileLen Integer32,
zxAnSwCardBootwareBuildTime DateAndTime,
zxAnSwCardFirmware1FileName DisplayString,
zxAnSwCardFirmware1FileType DisplayString,
zxAnSwCardFirmware1Version DisplayString,
zxAnSwCardFirmware1FileLen Integer32,
zxAnSwCardFirmware1BuildTime DateAndTime,
zxAnSwCardFirmware2FileName DisplayString,
zxAnSwCardFirmware2FileType DisplayString,
zxAnSwCardFirmware2Version DisplayString,
zxAnSwCardFirmware2FileLen Integer32,
zxAnSwCardFirmware2BuildTime DateAndTime,
zxAnSwCardFirmware3FileName DisplayString,
zxAnSwCardFirmware3FileType DisplayString,
zxAnSwCardFirmware3Version DisplayString,
zxAnSwCardFirmware3FileLen Integer32,
zxAnSwCardFirmware3BuildTime DateAndTime
}
zxAnSwCardRack OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The rack number"
::= { zxAnSwCardRunningVerEntry 1 }
zxAnSwCardShelf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The shelf number"
::= { zxAnSwCardRunningVerEntry 2 }
zxAnSwCardSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The slot number"
::= { zxAnSwCardRunningVerEntry 3 }
zxAnSwCardFileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version file name of the card."
::= { zxAnSwCardRunningVerEntry 5 }
zxAnSwCardFileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version file type of the card."
::= { zxAnSwCardRunningVerEntry 6 }
zxAnSwCardVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version tag of the card."
::= { zxAnSwCardRunningVerEntry 7 }
zxAnSwCardFileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version file length of the card."
::= { zxAnSwCardRunningVerEntry 8 }
zxAnSwCardBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwCardRunningVerEntry 9 }
zxAnSwCardBootwareFileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bootrom file name of the card."
::= { zxAnSwCardRunningVerEntry 10 }
zxAnSwCardBootwareFileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bootrom file type of the card."
::= { zxAnSwCardRunningVerEntry 11 }
zxAnSwCardBootwareVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bootrom tag of the card."
::= { zxAnSwCardRunningVerEntry 12 }
zxAnSwCardBootwareFileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bootrom file length of the card."
::= { zxAnSwCardRunningVerEntry 13 }
zxAnSwCardBootwareBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwCardRunningVerEntry 14 }
zxAnSwCardFirmware1FileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file name of the card."
::= { zxAnSwCardRunningVerEntry 15 }
zxAnSwCardFirmware1FileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file type of the card."
::= { zxAnSwCardRunningVerEntry 16 }
zxAnSwCardFirmware1Version OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware tag of the card."
::= { zxAnSwCardRunningVerEntry 17 }
zxAnSwCardFirmware1FileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file length of the card."
::= { zxAnSwCardRunningVerEntry 18 }
zxAnSwCardFirmware1BuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwCardRunningVerEntry 19 }
zxAnSwCardFirmware2FileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file name of the card."
::= { zxAnSwCardRunningVerEntry 20 }
zxAnSwCardFirmware2FileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file type of the card."
::= { zxAnSwCardRunningVerEntry 21 }
zxAnSwCardFirmware2Version OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware tag of the card."
::= { zxAnSwCardRunningVerEntry 22 }
zxAnSwCardFirmware2FileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file length of the card."
::= { zxAnSwCardRunningVerEntry 23 }
zxAnSwCardFirmware2BuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwCardRunningVerEntry 24 }
zxAnSwCardFirmware3FileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file name of the card."
::= { zxAnSwCardRunningVerEntry 25 }
zxAnSwCardFirmware3FileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file type of the card."
::= { zxAnSwCardRunningVerEntry 26 }
zxAnSwCardFirmware3Version OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware tag of the card."
::= { zxAnSwCardRunningVerEntry 27 }
zxAnSwCardFirmware3FileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file length of the card."
::= { zxAnSwCardRunningVerEntry 28 }
zxAnSwCardFirmware3BuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwCardRunningVerEntry 29 }
-------------------------------------------------------------------------------
-- 2. Subcard Running Software Information Table
-------------------------------------------------------------------------------
zxAnSwSubcardRunningVerTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwSubcardRunningVerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table includes the sub card version information."
::= { zxAnCardSwObjects 3 }
zxAnSwSubcardRunningVerEntry OBJECT-TYPE
SYNTAX ZxAnSwSubcardRunningVerEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in zxAnSwSubcardRunningVerTable."
INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot,
zxAnSwSubcardSlot }
::= { zxAnSwSubcardRunningVerTable 1 }
ZxAnSwSubcardRunningVerEntry ::= SEQUENCE {
zxAnSwSubcardSlot Integer32,
zxAnSwSubcardFileName DisplayString,
zxAnSwSubcardFileType DisplayString,
zxAnSwSubcardVersion DisplayString,
zxAnSwSubcardFileLen Integer32,
zxAnSwSubcardBuildTime DateAndTime,
zxAnSwSubcardBootwareFileName DisplayString,
zxAnSwSubcardBootwareFileType DisplayString,
zxAnSwSubcardBootwareVersion DisplayString,
zxAnSwSubcardBootwareFileLen Integer32,
zxAnSwSubcardBootwareBuildTime DateAndTime,
zxAnSwSubcardFirmwareFileName DisplayString,
zxAnSwSubcardFirmwareFileType DisplayString,
zxAnSwSubcardFirmwareVersion DisplayString,
zxAnSwSubcardFirmwareFileLen Integer32,
zxAnSwSubcardFirmwareBuildTime DateAndTime
}
zxAnSwSubcardSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The slot number of the subcard"
::= { zxAnSwSubcardRunningVerEntry 1 }
zxAnSwSubcardFileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version file name of the card."
::= { zxAnSwSubcardRunningVerEntry 3 }
zxAnSwSubcardFileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version file type of the card."
::= { zxAnSwSubcardRunningVerEntry 4 }
zxAnSwSubcardVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version tag of the card."
::= { zxAnSwSubcardRunningVerEntry 5 }
zxAnSwSubcardFileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version file length of the card."
::= { zxAnSwSubcardRunningVerEntry 6 }
zxAnSwSubcardBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwSubcardRunningVerEntry 7 }
zxAnSwSubcardBootwareFileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bootrom file name of the card."
::= { zxAnSwSubcardRunningVerEntry 8 }
zxAnSwSubcardBootwareFileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bootrom file type of the card."
::= { zxAnSwSubcardRunningVerEntry 9 }
zxAnSwSubcardBootwareVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bootrom tag of the card."
::= { zxAnSwSubcardRunningVerEntry 10 }
zxAnSwSubcardBootwareFileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The bootrom file length of the card."
::= { zxAnSwSubcardRunningVerEntry 11 }
zxAnSwSubcardBootwareBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwSubcardRunningVerEntry 12 }
zxAnSwSubcardFirmwareFileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file name of the card."
::= { zxAnSwSubcardRunningVerEntry 13 }
zxAnSwSubcardFirmwareFileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file type of the card."
::= { zxAnSwSubcardRunningVerEntry 14 }
zxAnSwSubcardFirmwareVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware tag of the card."
::= { zxAnSwSubcardRunningVerEntry 15 }
zxAnSwSubcardFirmwareFileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The firmware file length of the card."
::= { zxAnSwSubcardRunningVerEntry 16 }
zxAnSwSubcardFirmwareBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwSubcardRunningVerEntry 17 }
-------------------------------------------------------------------------------
-- 3.Saved Software information Table
-------------------------------------------------------------------------------
zxAnSwImageTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table includes the saved version information in
version area MP."
::= { zxAnCardSwObjects 4 }
zxAnSwImageEntry OBJECT-TYPE
SYNTAX ZxAnSwImageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in zxAnSwImageTable."
INDEX {zxAnSwCardRack,zxAnSwCardShelf,zxAnSwCardSlot,
zxAnSwImageFileName}
::= { zxAnSwImageTable 1 }
ZxAnSwImageEntry ::= SEQUENCE {
zxAnSwImageFileName DisplayString,
zxAnSwImageFileType DisplayString,
zxAnSwImageVersion DisplayString,
zxAnSwImageFileLen Integer32,
zxAnSwImageBuildTime DateAndTime,
zxAnSwImageActiveStatus INTEGER,
zxAnSwImageDownloadTime DateAndTime
}
zxAnSwImageFileName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION ""
::= { zxAnSwImageEntry 1 }
zxAnSwImageFileType OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version file type on the saved area."
::= { zxAnSwImageEntry 2 }
zxAnSwImageVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version tag on the saved area."
::= { zxAnSwImageEntry 3 }
zxAnSwImageFileLen OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version file length on the saved area."
::= { zxAnSwImageEntry 4 }
zxAnSwImageBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of version build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwImageEntry 5 }
zxAnSwImageActiveStatus OBJECT-TYPE
SYNTAX INTEGER
{
active(1),
inactive(2),
none(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The status of saved MP version on the saved area.
active(1): active MP version.
inactive(2): inactive MP version.
none(3): NP version, don't have active attribute.
"
::= { zxAnSwImageEntry 6 }
zxAnSwImageDownloadTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The downloading time of the version file."
::= { zxAnSwImageEntry 7 }
-------------------------------------------------------------------------------
-- 4 Software Manual Update Management Table
-------------------------------------------------------------------------------
zxAnSwManualUpdateRack OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The rack number.
The multi-variables binding rule should be complied
with when a manager manual updates software. According
to this rule,all the related mib variables must be
included in one SNMP set operation.
There are two types of variables: mandatory and
optional. All of the mandatory variables must be
included in one SNMP set operation. Optional variables
may be included in one SNMP set operation with the
mandatory variables, but must not be used alone.
To manual update software, the mandatory and optional
variables are as follows:
mandatoty: zxAnSwManualUpdateRack,
zxAnSwManualUpdateShelf,
zxAnSwManualUpdateSlotList,
zxAnSwManualUpdateSwType
optional : none
To manual update subcard software, the mandatory and
optional variables are as follows:
mandatoty: zxAnSwManualUpdateRack,
zxAnSwManualUpdateShelf,
zxAnSwManualUpdateSlotList,
zxAnSwManualUpdateSwType,
zxAnSwManualUpdateSubcardList
optional : none
"
::= { zxAnSwManualUpdateGlobalObjects 1 }
zxAnSwManualUpdateShelf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The shelf number.
This variable must comply with the multi-variables
binding rule described in zxAnSwManualUpdateRack."
::= { zxAnSwManualUpdateGlobalObjects 2 }
zxAnSwManualUpdateSlotList OBJECT-TYPE
SYNTAX DisplayString (SIZE (0 .. 64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The slot number. updating version file from MP to NP.
They can be updated in batch. For example: '1,2,3'
This variable must comply with the multi-variables
binding rule described in zxAnSwManualUpdateRack."
::= { zxAnSwManualUpdateGlobalObjects 3 }
zxAnSwManualUpdateSwType OBJECT-TYPE
SYNTAX INTEGER {
bootware(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The software type is special to update.
This variable must comply with the multi-variables
binding rule described in zxAnSwManualUpdateRack.
bootware(1): update bootware."
::= { zxAnSwManualUpdateGlobalObjects 4 }
zxAnSwManualUpdateSubcardList OBJECT-TYPE
SYNTAX DisplayString (SIZE (0 .. 64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The subcard number. updating version file from MP to subcard.
They can be updated in batch. For example: '1,2,3'
This variable must comply with the multi-variables
binding rule described in zxAnSwManualUpdateRack.
If zxAnSwManualUpdateSlotList is '1,2' and
zxAnSwManualUpdateSubcardList is '3,4', the actual operation object
like 'slot.subcard' is '1.3', '1.4', '2.3', '2.4'."
::= { zxAnSwManualUpdateGlobalObjects 5 }
-------------------------------------------------------------------------------
-- 5. Software Manual Update Status Table
-------------------------------------------------------------------------------
zxAnSwManualUpdateStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwManualUpdateStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table includes the version updating status
information."
::= { zxAnSwManualUpdateObjects 5 }
zxAnSwManualUpdateStatusEntry OBJECT-TYPE
SYNTAX ZxAnSwManualUpdateStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in zxAnSwManualUpdateStatusTable."
INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot,
zxAnSwManualUpdateSoftwareType }
::= { zxAnSwManualUpdateStatusTable 1 }
ZxAnSwManualUpdateStatusEntry ::= SEQUENCE {
zxAnSwManualUpdateSoftwareType INTEGER,
zxAnSwManualUpdateStatus INTEGER,
zxAnSwManualFailedReason INTEGER
}
zxAnSwManualUpdateSoftwareType OBJECT-TYPE
SYNTAX INTEGER
{
bootware(1)
-- Update bootware.
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The software type when updating version."
::= { zxAnSwManualUpdateStatusEntry 1 }
zxAnSwManualUpdateStatus OBJECT-TYPE
SYNTAX INTEGER {negotiating(1),downloading(2),failed(3),
success(4),sameversion(5)}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version status when updating version.
negotiating(1):negotiating not starting
downloading(2):updating from MP
failed(3): update failed
success(4): update successly
sameVersion(5):not need update
"
::= { zxAnSwManualUpdateStatusEntry 2 }
zxAnSwManualFailedReason OBJECT-TYPE
SYNTAX INTEGER
{
noError(1),
-- no error.
noSupportCardHwVersion(2),
-- control card doesn't support the current card hardware
-- version.
mismatchCardHwVersion (3),
-- control card's configuration and the current card
-- hardware version are mismatch.
mismatchCardConfData (4),
-- control card's configuration and the current card
-- configuration data are mismatch.
noSwInNe (5),
-- software for this card doesn't exist in control card.
cardUpdateSwFailed (6)
-- the current card software update failed.
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The reason when updating version failed."
::= { zxAnSwManualUpdateStatusEntry 3 }
-------------------------------------------------------------------------------
-- 6. Subcard Software Manual Update Status Table
-------------------------------------------------------------------------------
zxAnSwSubcardMUpdateStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwSubcardMUpdateStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes the subcard software updating status
information."
::= { zxAnSwManualUpdateObjects 6 }
zxAnSwSubcardMUpdateStatusEntry OBJECT-TYPE
SYNTAX ZxAnSwSubcardMUpdateStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in zxAnSwSubcardMUpdateStatusTable."
INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot,
zxAnSwSubcardSlot, zxAnSwSubcardMUpdateSoftwareType }
::= { zxAnSwSubcardMUpdateStatusTable 1 }
ZxAnSwSubcardMUpdateStatusEntry ::= SEQUENCE {
zxAnSwSubcardMUpdateSoftwareType INTEGER,
zxAnSwSubcardMUpdateStatus INTEGER,
zxAnSwSubcardMUpdateFailedReason INTEGER
}
zxAnSwSubcardMUpdateSoftwareType OBJECT-TYPE
SYNTAX INTEGER {
bootware(1)
}
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The software type when updating subcard software.
bootware(1): update bootware."
::= { zxAnSwSubcardMUpdateStatusEntry 1 }
zxAnSwSubcardMUpdateStatus OBJECT-TYPE
SYNTAX INTEGER {
negotiating(1),
downloading(2),
failed(3),
success(4),
sameversion(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The updating status when updating subcard software.
negotiating(1): negotiating not starting.
downloading(2): updating from MP.
failed(3): update failed.
success(4): update successfully.
sameVersion(5): not need to update.
"
::= { zxAnSwSubcardMUpdateStatusEntry 2 }
zxAnSwSubcardMUpdateFailedReason OBJECT-TYPE
SYNTAX INTEGER {
noError(1),
noSupportCardHwVersion(2),
mismatchCardHwVersion(3),
mismatchCardConfData(4),
noSwInNe(5),
cardUpdateSwFailed(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The reason when updating subcard software failed.
noError(1): no error.
noSupportCardHwVersion(2): control card doesn't support the
current card hardware version.
mismatchCardHwVersion(3): control card's configuration and the
current card hardware version are mismatch.
mismatchCardConfData(4): control card's configuration and the
current card configuration data are mismatch.
noSwInNe(5): software for this card doesn't exist in control card.
cardUpdateSwFailed(6): the current card software update failed."
::= { zxAnSwSubcardMUpdateStatusEntry 3 }
-------------------------------------------------------------------------------
-- 7. Software Automatic Update Check Management Table
-------------------------------------------------------------------------------
zxAnSwAutoUpdateChkEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the software periodic check function.
The multi-variables binding rule should be complied with
when a software periodic check. According to this rule,
all the related mib variables must be included in one SNMP
set operation.
There are two types of variables: mandatory and optional.
All of the mandatory variables must be included in one SNMP
set operation. Optional variables may be included in one
SNMP set operation with the mandatory variables, but must
not be used alone.
To configure software periodic check(except disable
software periodic check function), the mandatory and
optional variables are as follows:
mandatoty: zxAnSwAutoUpdateChkEnable,
zxAnSwAutoUpdateChkStartTime,
zxAnSwAutoUpdateChkInterval
optional : none
"
DEFVAL { disable }
::= { zxAnSwAutoUpdateChkObjects 1 }
zxAnSwAutoUpdateChkStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The start time of software periodic check.
For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
This variable must comply with the multi-variables binding
rule described in zxAnSwAutoUpdateChkEnable.
"
::= { zxAnSwAutoUpdateChkObjects 2 }
zxAnSwAutoUpdateChkInterval OBJECT-TYPE
SYNTAX Integer32(0..8760)
UNITS "hours"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The interval of software periodic check.
Value 0 means unconfigured.
Unit is hour.
This variable must comply with the multi-variables binding
rule described in zxAnSwAutoUpdateChkEnable.
"
DEFVAL { 24 }
::= { zxAnSwAutoUpdateChkObjects 3 }
zxAnSwAutoUpdateCurrChkStartTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The start time of current software periodic check.
For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwAutoUpdateChkObjects 20 }
zxAnSwAutoUpdateChkDifferFiles OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The different files name between NE and file server.
File name is separated by ',', For example:xxx,xxx,xxx."
::= { zxAnSwAutoUpdateChkObjects 21 }
zxAnSwAutoUpdateChkStatus OBJECT-TYPE
SYNTAX INTEGER {
notStarted(1),
inProgress(2),
success(3),
failed(4)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of software periodic check.
notStarted(1): Automatic update check not start
inProgress(2): Automatic update check in progress
success(3): Automatic update check successful
failed(4): Automatic update check failed
"
::= { zxAnSwAutoUpdateChkObjects 22 }
zxAnSwAutoUpdateChkFailedReason OBJECT-TYPE
SYNTAX INTEGER {
noError(1),
fileServerUnconfigured(2),
fileServerConnectFailed(3),
fileServerLoginFailed(4),
fileServerPathError(5),
fileServerProtocolTypeError(6),
deviceCheckFailed(7),
otherErrors(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failed reason of software periodic check.
noError(1): Automatic update check successful
or not start
fileServerUnconfigured(2): Automatic update file server
is not configure
fileServerConnectFailed(3): File server connect failed
fileServerLoginFailed(4): File server configure is not
correct
fileServerPathError(5): File server configure path is
not correct
fileServerProtocolTypeError(6): File server configure protocol
type is not correct
deviceCheckFailed(7): NE flash error
otherErrors(255): Error is not include above list
"
::= { zxAnSwAutoUpdateChkObjects 23 }
-------------------------------------------------------------------------------
-- 8. Software Automatic Update Management Table
-------------------------------------------------------------------------------
zxAnSwAutoUpdateAction OBJECT-TYPE
SYNTAX INTEGER{
start(1)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The automatic update action.
It means to start the automatic update progress."
::= { zxAnSwAutoUpdateOperObjects 1 }
zxAnSwAutoUpdateActiveEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the software active function. Active means to
reset card except control card."
DEFVAL { enable }
::= { zxAnSwAutoUpdateOperObjects 2 }
zxAnSwAutoUpdateSwBackupEnable OBJECT-TYPE
SYNTAX INTEGER{
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Enable or disable the version file backup function."
DEFVAL { enable }
::= { zxAnSwAutoUpdateOperObjects 3 }
zxAnSwAutoUpdateStatus OBJECT-TYPE
SYNTAX INTEGER{
notStarted(1),
updateStarting(2),
backingUpFile(3),
versionFileAnalyzing(4),
versionFileDownloading(5),
versionFileDownloadComplete(6),
masterSlaveSynchronizing(7),
masterSlaveSyncComplete(8),
versionFileLoading(9),
bootUpdating(10),
bootUpdateComplete(11),
updateSuccess(12),
readyToReboot(13),
sameVersion(14),
updateFailed(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of automatic update.
notStarted(1): Not start
updateStarting(2): Update Start
backingUpFile(3): Backup software before update
versionFileAnalyzing(4): Software analyzing
versionFileDownloading(5): Software downloading
versionFileDownloadComplete(6):Software download completed
masterSlaveSynchronizing(7): Synchronize software to slave board
masterSlaveSyncComplete(8): Synchronize software completed
versionFileLoading(9): Load software to card
bootUpdating(10): Update bootrom
bootUpdateComplete(11): Update bootrom completed
updateSuccess(12): Update successful
readyToReboot(13): Update had beed finished,ready to reboot
sameVersion(14): Update is not need for same version
updateFailed(255): Update failed
"
::= { zxAnSwAutoUpdateOperObjects 20 }
zxAnSwAutoUpdateCurrFileName OBJECT-TYPE
SYNTAX DisplayString(SIZE(0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The name of current file which is updated."
::= { zxAnSwAutoUpdateOperObjects 21 }
zxAnSwAutoUpdateCurrFileSize OBJECT-TYPE
SYNTAX Integer32
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The size of current file which is updated."
::= { zxAnSwAutoUpdateOperObjects 22 }
zxAnSwAutoUpdateCurrFileProgress OBJECT-TYPE
SYNTAX Integer32(0..100)
UNITS "percent"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The updating progress of current file."
::= { zxAnSwAutoUpdateOperObjects 23 }
zxAnSwAutoUpdateTotalFiles OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total count of files will be updated."
::= { zxAnSwAutoUpdateOperObjects 24 }
zxAnSwAutoUpdateSuccessFiles OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Count of files which are updated successfully."
::= { zxAnSwAutoUpdateOperObjects 25 }
zxAnSwAutoUpdateFailedReason OBJECT-TYPE
SYNTAX INTEGER{
noError(1),
backupDataError(2),
backupLogError(3),
backupConfigurationError(4),
backupVersionFileError(5),
backupOtherError(6),
analyzingConfigurationError(7),
analyzingVersionFileError(8),
diskFull(9),
downloadingVersionFileError(10),
updateVersionFileError(11),
updateBootError(12),
masterSlaveSynchronizeError(13),
updateConflict(14),
unavailableServer(15),
slaveCardNotInService(16),
fileNotExist(17),
otherErrors(255)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The failed reason of automatic update.
noError(1), Update is not start or successful
backupDataError(2), Backup data failed
backupLogError(3), Backup log failed
backupConfigurationError(4), Backup configuration failed
backupVersionFileError(5), Backup software failed
backupOtherError(6), Backup file failed is not above
list
analyzingConfigurationError(7), Analyze configuration error
analyzingVersionFileError(8), Analyze software error
diskFull(9), NE disk is full
downloadingVersionFileError(10),Download software failed
updateVersionFileError(11), Update software failed
updateBootError(12), Update bootrom failed
masterSlaveSynchronizeError(13),Synchronize software to slave board
failed
updateConflict(14), Other update is executing
unavailableServer(15), File server configure failed
slaveCardNotInService(16), Slave board is not inservice
fileNotExist(17), File not exist on server
otherErrors(255) Other errors is not list above
"
::= { zxAnSwAutoUpdateOperObjects 26 }
-------------------------------------------------------------------------------
-- 9. Software Swap Management Table
-------------------------------------------------------------------------------
zxAnSwSwapRack OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The Rack No. is used for swap version .
The multi-variables binding rule should be complied
with when swap software. According to this rule,
all the related mib variables must be included in one
SNMP set operation.
There are two types of variables: mandatory and optional.
All of the mandatory variables must be included in one
SNMP set operation. Optional variables may be included
in one SNMP set operation with the mandatory variables,
but must not be used alone.
To swap software, the mandatory and optional variables
are as follows:
mandatoty:zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot
optional :none
"
::= { zxAnSwSwapGlobalObjects 1 }
zxAnSwSwapShelf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The Shelf number is used for swap version.
This variable must comply with the multi-variables
binding rule described in zxAnSwSwapRack.
"
::= { zxAnSwSwapGlobalObjects 2 }
zxAnSwSwapSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-write
STATUS current
DESCRIPTION " The slot number is used for swap version.
This variable must comply with the multi-variables
binding rule described in zxAnSwSwapRack.
"
::= { zxAnSwSwapGlobalObjects 3 }
------------------------------------------------------------------------------
-- 10. Saved Patch Information Table
------------------------------------------------------------------------------
zxAnSwSavedPatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwSavedPatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table includes the saved patch information."
::= { zxAnCardPatchObjects 2 }
zxAnSwSavedPatchEntry OBJECT-TYPE
SYNTAX ZxAnSwSavedPatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in zxAnSwSavedPatchTable."
INDEX { zxAnSwPatchRack,zxAnSwPatchShelf,
zxAnSwPatchSlot,zxAnSwPatchName }
::= { zxAnSwSavedPatchTable 1 }
ZxAnSwSavedPatchEntry ::= SEQUENCE {
zxAnSwPatchRack Integer32,
zxAnSwPatchShelf Integer32,
zxAnSwPatchSlot Integer32,
zxAnSwPatchName DisplayString,
zxAnSwPatchOwnerSwVersion DisplayString,
zxAnSwPatchVersion DisplayString,
zxAnSwPatchSize Integer32,
zxAnSwPatchBuildTime DateAndTime,
zxAnSwPatchConfActiveStatus INTEGER,
zxAnSwPatchDescription DisplayString
}
zxAnSwPatchRack OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The rack number."
::= { zxAnSwSavedPatchEntry 1 }
zxAnSwPatchShelf OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The shelf number."
::= { zxAnSwSavedPatchEntry 2 }
zxAnSwPatchSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The slot number."
::= { zxAnSwSavedPatchEntry 3 }
zxAnSwPatchName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The patch file name."
::= { zxAnSwSavedPatchEntry 4 }
zxAnSwPatchOwnerSwVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The software version of the patch belonging to."
::= { zxAnSwSavedPatchEntry 5 }
zxAnSwPatchVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version tag of the patch."
::= { zxAnSwSavedPatchEntry 6 }
zxAnSwPatchSize OBJECT-TYPE
SYNTAX Integer32
UNITS "byte"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The patch file length."
::= { zxAnSwSavedPatchEntry 7 }
zxAnSwPatchBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of patch build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwSavedPatchEntry 8 }
zxAnSwPatchConfActiveStatus OBJECT-TYPE
SYNTAX INTEGER{
activated(1),
deactivated(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The configured active status of the patch file.
activated -- to activate the patch file.
deactivated -- to deactivate the patch file."
DEFVAL { deactivated }
::= { zxAnSwSavedPatchEntry 9 }
zxAnSwPatchDescription OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 255 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The patch description."
::= { zxAnSwSavedPatchEntry 10 }
------------------------------------------------------------------------------
-- 11. Card Patch Running Status Information Table
------------------------------------------------------------------------------
zxAnSwCardPatchRunStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwCardPatchRunStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes the patch running status information of the
card."
::= { zxAnCardPatchObjects 3 }
zxAnSwCardPatchRunStatusEntry OBJECT-TYPE
SYNTAX ZxAnSwCardPatchRunStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in zxAnSwCardPatchRunStatusTable."
INDEX
{ zxAnSwPatchRack,
zxAnSwPatchShelf,
zxAnSwPatchSlot,
zxAnSwCardPatchName }
::= { zxAnSwCardPatchRunStatusTable 1 }
ZxAnSwCardPatchRunStatusEntry ::= SEQUENCE {
zxAnSwCardPatchName DisplayString,
zxAnSwCardPatchOwnerSwVersion DisplayString,
zxAnSwCardPatchVersion DisplayString,
zxAnSwCardPatchSize Integer32,
zxAnSwCardPatchBuildTime DateAndTime,
zxAnSwCardPatchActivatedTime DateAndTime,
zxAnSwCardPatchDescription DisplayString,
zxAnSwCardPatchRunningStatus INTEGER
}
zxAnSwCardPatchName OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The patch file name of the card."
::= { zxAnSwCardPatchRunStatusEntry 1 }
zxAnSwCardPatchOwnerSwVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The software version of the patch belonging to."
::= { zxAnSwCardPatchRunStatusEntry 2 }
zxAnSwCardPatchVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version tag of the patch."
::= { zxAnSwCardPatchRunStatusEntry 3 }
zxAnSwCardPatchSize OBJECT-TYPE
SYNTAX Integer32
UNITS "byte"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The patch file length."
::= { zxAnSwCardPatchRunStatusEntry 4 }
zxAnSwCardPatchBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of patch build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwCardPatchRunStatusEntry 5 }
zxAnSwCardPatchActivatedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of the patch activated. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwCardPatchRunStatusEntry 6 }
zxAnSwCardPatchDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The patch description."
::= { zxAnSwCardPatchRunStatusEntry 7 }
zxAnSwCardPatchRunningStatus OBJECT-TYPE
SYNTAX INTEGER{
activatingSucceeded(1),
activatingFailed(2),
waitingToBeActivated(3),
resettingCardNeeded(4),
mismatched(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The patch running status.
activatingSucceeded(1) : value 1 means the activating operation
of the patch file is succeeded.
activatingFailed(2) : value 2 means the activating operation
of the patch file is failed.
waitingToBeActivated(3): value 3 means the patch file is waiting
to be activated.
resettingCardNeeded(4) : value 4 means the patch file has been
successfully activated and the card
needs to be reset.
mismatched(5) : value 5 means the version of the patch
file is not matched with the version of
the card software."
::= { zxAnSwCardPatchRunStatusEntry 8 }
------------------------------------------------------------------------------
-- 12. Subcard Running Patch Information Table
------------------------------------------------------------------------------
zxAnSwSubcardRunningPatchTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwSubcardRunningPatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table includes the subcard patch information."
::= { zxAnCardPatchObjects 4 }
zxAnSwSubcardRunningPatchEntry OBJECT-TYPE
SYNTAX ZxAnSwSubcardRunningPatchEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "An entry in zxAnSwSubcardRunningPatchTable."
INDEX { zxAnSwPatchRack,zxAnSwPatchShelf,
zxAnSwPatchSlot,zxAnSwPatchSubcardSlot,
zxAnSwSubcardPatchName }
::= { zxAnSwSubcardRunningPatchTable 1 }
ZxAnSwSubcardRunningPatchEntry ::= SEQUENCE {
zxAnSwPatchSubcardSlot Integer32,
zxAnSwSubcardPatchName DisplayString,
zxAnSwSubcardPatchOwnerSwVersion DisplayString,
zxAnSwSubcardPatchVersion DisplayString,
zxAnSwSubcardPatchSize Integer32,
zxAnSwSubcardPatchBuildTime DateAndTime,
zxAnSwSubcardPatchActivatedTime DateAndTime,
zxAnSwSubcardPatchDescription DisplayString
}
zxAnSwPatchSubcardSlot OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The slot number of the subcard."
::= { zxAnSwSubcardRunningPatchEntry 1 }
zxAnSwSubcardPatchName OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The file name of the patch "
::= { zxAnSwSubcardRunningPatchEntry 2 }
zxAnSwSubcardPatchOwnerSwVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The software version of the patch belonging to."
::= { zxAnSwSubcardRunningPatchEntry 3 }
zxAnSwSubcardPatchVersion OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version tag of the patch."
::= { zxAnSwSubcardRunningPatchEntry 4 }
zxAnSwSubcardPatchSize OBJECT-TYPE
SYNTAX Integer32
UNITS "byte"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The patch file length."
::= { zxAnSwSubcardRunningPatchEntry 5 }
zxAnSwSubcardPatchBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of patch build. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwSubcardRunningPatchEntry 6 }
zxAnSwSubcardPatchActivatedTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The time of the patch activated. For example:
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
::= { zxAnSwSubcardRunningPatchEntry 7 }
zxAnSwSubcardPatchDescription OBJECT-TYPE
SYNTAX DisplayString ( SIZE ( 0 .. 255 ) )
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The patch description."
::= { zxAnSwSubcardRunningPatchEntry 8 }
------------------------------------------------------------------------------
-- 13. Saved Patch Package information Table
------------------------------------------------------------------------------
zxAnSwSavedPatchPackageTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwSavedPatchPackageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes the saved patch package information."
::= { zxAnCardPatchObjects 5 }
zxAnSwSavedPatchPackageEntry OBJECT-TYPE
SYNTAX ZxAnSwSavedPatchPackageEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in zxAnSwSavedPatchPackageTable."
INDEX
{ zxAnSwPatchRack,
zxAnSwPatchShelf,
zxAnSwPatchSlot,
zxAnSwPatchPkgName }
::= { zxAnSwSavedPatchPackageTable 1 }
ZxAnSwSavedPatchPackageEntry ::= SEQUENCE {
zxAnSwPatchPkgName DisplayString,
zxAnSwPatchPkgVersion DisplayString,
zxAnSwPatchPkgSize Integer32,
zxAnSwPatchPkgBuildTime DateAndTime,
zxAnSwPatchPkgDescription DisplayString,
zxAnSwPatchPkgConfActiveStatus INTEGER,
zxAnSwPatchPkgActualActiveStatus INTEGER
}
zxAnSwPatchPkgName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "The name of the patch package."
::= { zxAnSwSavedPatchPackageEntry 1 }
zxAnSwPatchPkgVersion OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..64))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The version of the patch package."
::= { zxAnSwSavedPatchPackageEntry 2 }
zxAnSwPatchPkgSize OBJECT-TYPE
SYNTAX Integer32
UNITS "byte"
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The size of the patch package."
::= { zxAnSwSavedPatchPackageEntry 3 }
zxAnSwPatchPkgBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The build time of patch package."
::= { zxAnSwSavedPatchPackageEntry 4 }
zxAnSwPatchPkgDescription OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The description of the patch package."
::= { zxAnSwSavedPatchPackageEntry 5 }
zxAnSwPatchPkgConfActiveStatus OBJECT-TYPE
SYNTAX INTEGER{
activated(1),
deactivated(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The configured active status of the patch package.
activated(1) : value 1 means the configured active status of
the patch package is activated.
deactivated(2) : value 2 means the configured active status of
the patch package is deactivated."
DEFVAL { deactivated }
::= { zxAnSwSavedPatchPackageEntry 6 }
zxAnSwPatchPkgActualActiveStatus OBJECT-TYPE
SYNTAX INTEGER{
activated(1),
deactivated(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The actual active status of the patch package.
activated(1) : value 1 means the patch package is activated.
deactivated(2) : value 2 means the patch package is deactivated."
::= { zxAnSwSavedPatchPackageEntry 7 }
------------------------------------------------------------------------------
-- 14. Saved Patch Package File Information Table
------------------------------------------------------------------------------
zxAnSwSavedPatchPackageFileTable OBJECT-TYPE
SYNTAX SEQUENCE OF ZxAnSwSavedPatchPackageFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table includes the information of the file inside the patch
package."
::= { zxAnCardPatchObjects 6 }
zxAnSwSavedPatchPackageFileEntry OBJECT-TYPE
SYNTAX ZxAnSwSavedPatchPackageFileEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in zxAnSwSavedPatchPackageFileTable."
INDEX
{ zxAnSwPatchRack,
zxAnSwPatchShelf,
zxAnSwPatchSlot,
zxAnSwPatchPkgName,
zxAnSwPatchPkgFileName }
::= { zxAnSwSavedPatchPackageFileTable 1 }
ZxAnSwSavedPatchPackageFileEntry ::= SEQUENCE {
zxAnSwPatchPkgFileName DisplayString,
zxAnSwPatchPkgFileBuildTime DateAndTime,
zxAnSwPatchPkgFileNeedResetCard INTEGER,
zxAnSwPatchPkgFileActiveStatus INTEGER
}
zxAnSwPatchPkgFileName OBJECT-TYPE
SYNTAX DisplayString (SIZE (1..64))
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The name of the file inside the patch package."
::= { zxAnSwSavedPatchPackageFileEntry 1 }
zxAnSwPatchPkgFileBuildTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The build time of the file inside the patch package."
::= { zxAnSwSavedPatchPackageFileEntry 2 }
zxAnSwPatchPkgFileNeedResetCard OBJECT-TYPE
SYNTAX INTEGER{
yes(1),
no(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Whether the card needs to be reset.
yes(1) : value 1 means need to reset the card.
no(2) : value 2 means no need to reset the card."
::= { zxAnSwSavedPatchPackageFileEntry 3 }
zxAnSwPatchPkgFileActiveStatus OBJECT-TYPE
SYNTAX INTEGER{
activated(1),
deactivated(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The patch file active status.
activated(1) : value 1 means the patch file is activated.
deactivated(2) : value 2 means the patch file is deactivated."
::= { zxAnSwSavedPatchPackageFileEntry 4 }
-------------------------------------------------------------------------------
-- 21 Software Notification
-------------------------------------------------------------------------------
zxAnSwAutoUpdateFinished NOTIFICATION-TYPE
OBJECTS { zxAnSwAutoUpdateStatus,zxAnSwAutoUpdateFailedReason }
STATUS current
DESCRIPTION
"A zxAnSwAutoUpdateFinished is sent when the agent has detected
that the automatic update is finished."
::= { zxAnSwAutoUpdateTraps 1 }
zxAnSwAutoUpdateSwDiffer NOTIFICATION-TYPE
OBJECTS { zxAnSwAutoUpdateCurrChkStartTime,
zxAnSwAutoUpdateChkDifferFiles }
STATUS current
DESCRIPTION
"A zxAnSwAutoUpdateSwDiffer is sent when the agent has
detected different version files between NE and file server."
::= { zxAnSwAutoUpdateTraps 2 }
zxAnSwAutoUpdateSwChkFailed NOTIFICATION-TYPE
OBJECTS { zxAnSwAutoUpdateCurrChkStartTime,
zxAnSwAutoUpdateChkFailedReason }
STATUS current
DESCRIPTION
"A zxAnSwAutoUpdateSwChkFailed is sent when the agent has
detected that version check is failed."
::= { zxAnSwAutoUpdateTraps 3 }
-------------------------------------------------------------------------------
-- 31. Software Conformance
-------------------------------------------------------------------------------
zxAnSwConformance OBJECT IDENTIFIER ::= { zxAnSoftwareMib 4 }
zxAnSwCompliances OBJECT IDENTIFIER ::= { zxAnSwConformance 1 }
zxAnSwGroups OBJECT IDENTIFIER ::= { zxAnSwConformance 2 }
zxAnSwCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for SNMP entities which implement the
ZTE-AN-SOFTWARE-MIB."
MODULE -- this module
MANDATORY-GROUPS {
zxAnSwCardRunVerGroup,
zxAnSwSubcardRunVerGroup,
zxAnSwImageGroup,
zxAnSwManualUpdateGroup,
zxAnSwManualUpdateStatusGroup,
zxAnSwAutoUpdateChkGroup,
zxAnSwAutoUpdateOperGroup,
zxAnSwSwapGroup,
zxAnSwNotificationsGroup
}
::= { zxAnSwCompliances 1 }
zxAnSwCardRunVerGroup OBJECT-GROUP
OBJECTS {
zxAnSwCardFileName, zxAnSwCardFileType, zxAnSwCardVersion,
zxAnSwCardFileLen, zxAnSwCardBuildTime,
zxAnSwCardBootwareFileName, zxAnSwCardBootwareFileType,
zxAnSwCardBootwareVersion, zxAnSwCardBootwareFileLen,
zxAnSwCardBootwareBuildTime, zxAnSwCardFirmware1FileName,
zxAnSwCardFirmware1FileType, zxAnSwCardFirmware1Version,
zxAnSwCardFirmware1FileLen, zxAnSwCardFirmware1BuildTime,
zxAnSwCardFirmware2FileName, zxAnSwCardFirmware2FileType,
zxAnSwCardFirmware2Version, zxAnSwCardFirmware2FileLen,
zxAnSwCardFirmware2BuildTime, zxAnSwCardFirmware3FileName,
zxAnSwCardFirmware3FileType, zxAnSwCardFirmware3Version,
zxAnSwCardFirmware3FileLen, zxAnSwCardFirmware3BuildTime
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent chassis
version information, include card running version information."
::= { zxAnSwGroups 1 }
zxAnSwSubcardRunVerGroup OBJECT-GROUP
OBJECTS {zxAnSwSubcardFileName,
zxAnSwSubcardFileType, zxAnSwSubcardVersion,
zxAnSwSubcardFileLen, zxAnSwSubcardBuildTime,
zxAnSwSubcardBootwareFileName, zxAnSwSubcardBootwareFileType,
zxAnSwSubcardBootwareVersion, zxAnSwSubcardBootwareFileLen,
zxAnSwSubcardBootwareBuildTime, zxAnSwSubcardFirmwareFileName,
zxAnSwSubcardFirmwareFileType, zxAnSwSubcardFirmwareVersion,
zxAnSwSubcardFirmwareFileLen, zxAnSwSubcardFirmwareBuildTime
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent chassis
version information, include subcard running version information."
::= { zxAnSwGroups 2 }
zxAnSwImageGroup OBJECT-GROUP
OBJECTS {zxAnSwImageFileType, zxAnSwImageVersion, zxAnSwImageFileLen,
zxAnSwImageBuildTime, zxAnSwImageActiveStatus
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent chassis
version information, include card saved version information."
::= { zxAnSwGroups 3 }
zxAnSwManualUpdateGroup OBJECT-GROUP
OBJECTS {zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf,
zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType
}
STATUS current
DESCRIPTION
"The collection of objects which are used to update software by
manual."
::= { zxAnSwGroups 4 }
zxAnSwManualUpdateStatusGroup OBJECT-GROUP
OBJECTS {zxAnSwManualUpdateStatus, zxAnSwManualFailedReason
}
STATUS current
DESCRIPTION
"The collection of objects which are used to represent chassis
software update status."
::= { zxAnSwGroups 5 }
zxAnSwAutoUpdateChkGroup OBJECT-GROUP
OBJECTS { zxAnSwAutoUpdateChkEnable, zxAnSwAutoUpdateChkStartTime,
zxAnSwAutoUpdateChkInterval,
zxAnSwAutoUpdateCurrChkStartTime,
zxAnSwAutoUpdateChkDifferFiles, zxAnSwAutoUpdateChkStatus,
zxAnSwAutoUpdateChkFailedReason
}
STATUS current
DESCRIPTION
"The collection of objects which are used to management version
automatic updating.
Automatic version check to list the different files name between
NE and file server."
::= { zxAnSwGroups 6 }
zxAnSwAutoUpdateOperGroup OBJECT-GROUP
OBJECTS { zxAnSwAutoUpdateAction, zxAnSwAutoUpdateActiveEnable,
zxAnSwAutoUpdateSwBackupEnable, zxAnSwAutoUpdateStatus,
zxAnSwAutoUpdateCurrFileName, zxAnSwAutoUpdateCurrFileSize,
zxAnSwAutoUpdateCurrFileProgress, zxAnSwAutoUpdateTotalFiles,
zxAnSwAutoUpdateSuccessFiles, zxAnSwAutoUpdateFailedReason
}
STATUS current
DESCRIPTION
"The collection of objects which are used to management version
automatic updating.
Automatic version update to download version from file server and
to take effect."
::= { zxAnSwGroups 7 }
zxAnSwSwapGroup OBJECT-GROUP
OBJECTS { zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot
}
STATUS current
DESCRIPTION
"The collection of objects which are used to swap version ."
::= { zxAnSwGroups 8 }
zxAnSwNotificationsGroup OBJECT-GROUP
OBJECTS { zxAnSwAutoUpdateFinished, zxAnSwAutoUpdateSwDiffer,
zxAnSwAutoUpdateSwChkFailed
}
STATUS current
DESCRIPTION
"The notifications which indicate specific changes,
include automatic update check,automatic update status."
::= { zxAnSwGroups 9 }
END
Reference in New Issue Copy Permalink