1838 lines
77 KiB
Plaintext
1838 lines
77 KiB
Plaintext
ZTE-AN-SOFTWARE-MIB DEFINITIONS ::= BEGIN
|
|
IMPORTS
|
|
DisplayString FROM SNMPv2-TC
|
|
DateAndTime FROM SNMPv2-TC
|
|
TruthValue FROM SNMPv2-TC
|
|
MODULE-IDENTITY FROM SNMPv2-SMI
|
|
OBJECT-TYPE FROM SNMPv2-SMI
|
|
Integer32 FROM SNMPv2-SMI
|
|
NOTIFICATION-TYPE FROM SNMPv2-SMI
|
|
zxAnSystem FROM ZTE-AN-SMI
|
|
MODULE-COMPLIANCE FROM SNMPv2-CONF
|
|
OBJECT-GROUP FROM SNMPv2-CONF
|
|
NOTIFICATION-GROUP FROM SNMPv2-CONF;
|
|
|
|
|
|
zxAnSoftwareMib MODULE-IDENTITY
|
|
LAST-UPDATED "201105260000Z"
|
|
ORGANIZATION "ZTE Corporation"
|
|
CONTACT-INFO "Zhou YuBin ZTE Corporation
|
|
Mail: zhou.yubing@zte.com.cn
|
|
Tel : +86-21-68897315"
|
|
DESCRIPTION "This MIB defines zte Access Node software management."
|
|
|
|
REVISION "201105260000Z"
|
|
DESCRIPTION
|
|
"Initial version of this MIB module."
|
|
::= { zxAnSystem 30 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- Following management objects are defined.
|
|
-- 1. Card Running Software Information Table
|
|
-- 2. Subcard Running Software Information Table
|
|
-- 3. Saved Software Information Table
|
|
-- 4. Software Manual Update Management Table
|
|
-- 5. Software Manual Update Status Table
|
|
-- 6. Subcard Software Manual Update Status Table
|
|
-- 7. Software Automatic Update Check Management Table
|
|
-- 8. Software Automatic Update Management Table
|
|
-- 9. Software Swap Management Table
|
|
-- 10. Saved Patch Information Table
|
|
-- 11. Card Patch Running Status Information Table
|
|
-- 12. Subcard Running Patch Information Table
|
|
-- 13. Saved Patch Package Information Table
|
|
-- 14. Saved Patch Package File Information Table
|
|
|
|
-- Following notification objects are defined.
|
|
-- 21. Software Notification
|
|
|
|
-- Following conformance information is defined.
|
|
-- 31. Software Conformance
|
|
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwObjects OBJECT IDENTIFIER ::= { zxAnSoftwareMib 2 }
|
|
zxAnSwNotifications OBJECT IDENTIFIER ::= { zxAnSoftwareMib 3 }
|
|
|
|
zxAnCardSwObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 2 }
|
|
zxAnSwUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 3 }
|
|
zxAnSwSwapObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 4 }
|
|
zxAnCardPatchObjects OBJECT IDENTIFIER ::= { zxAnSwObjects 5 }
|
|
|
|
zxAnSwManualUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwUpdateObjects 2 }
|
|
zxAnSwManualUpdateGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwManualUpdateObjects 1 }
|
|
zxAnSwAutoUpdateObjects OBJECT IDENTIFIER ::= { zxAnSwUpdateObjects 3 }
|
|
zxAnSwAutoUpdateGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateObjects 1 }
|
|
|
|
zxAnSwAutoUpdateChkObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateGlobalObjects 1 }
|
|
zxAnSwAutoUpdateOperObjects OBJECT IDENTIFIER ::= { zxAnSwAutoUpdateGlobalObjects 2 }
|
|
|
|
zxAnSwSwapGlobalObjects OBJECT IDENTIFIER ::= { zxAnSwSwapObjects 1 }
|
|
|
|
zxAnSwAutoUpdateTraps OBJECT IDENTIFIER ::= { zxAnSwNotifications 1 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 1.Card Running Software Information Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwCardRunningVerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwCardRunningVerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table includes the card version information."
|
|
::= { zxAnCardSwObjects 2 }
|
|
|
|
zxAnSwCardRunningVerEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwCardRunningVerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in zxAnCardTable."
|
|
INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot }
|
|
::= { zxAnSwCardRunningVerTable 1 }
|
|
|
|
ZxAnSwCardRunningVerEntry ::= SEQUENCE {
|
|
zxAnSwCardRack Integer32,
|
|
zxAnSwCardShelf Integer32,
|
|
zxAnSwCardSlot Integer32,
|
|
zxAnSwCardFileName DisplayString,
|
|
zxAnSwCardFileType DisplayString,
|
|
zxAnSwCardVersion DisplayString,
|
|
zxAnSwCardFileLen Integer32,
|
|
zxAnSwCardBuildTime DateAndTime,
|
|
zxAnSwCardBootwareFileName DisplayString,
|
|
zxAnSwCardBootwareFileType DisplayString,
|
|
zxAnSwCardBootwareVersion DisplayString,
|
|
zxAnSwCardBootwareFileLen Integer32,
|
|
zxAnSwCardBootwareBuildTime DateAndTime,
|
|
zxAnSwCardFirmware1FileName DisplayString,
|
|
zxAnSwCardFirmware1FileType DisplayString,
|
|
zxAnSwCardFirmware1Version DisplayString,
|
|
zxAnSwCardFirmware1FileLen Integer32,
|
|
zxAnSwCardFirmware1BuildTime DateAndTime,
|
|
zxAnSwCardFirmware2FileName DisplayString,
|
|
zxAnSwCardFirmware2FileType DisplayString,
|
|
zxAnSwCardFirmware2Version DisplayString,
|
|
zxAnSwCardFirmware2FileLen Integer32,
|
|
zxAnSwCardFirmware2BuildTime DateAndTime,
|
|
zxAnSwCardFirmware3FileName DisplayString,
|
|
zxAnSwCardFirmware3FileType DisplayString,
|
|
zxAnSwCardFirmware3Version DisplayString,
|
|
zxAnSwCardFirmware3FileLen Integer32,
|
|
zxAnSwCardFirmware3BuildTime DateAndTime
|
|
}
|
|
|
|
zxAnSwCardRack OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The rack number"
|
|
::= { zxAnSwCardRunningVerEntry 1 }
|
|
|
|
zxAnSwCardShelf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The shelf number"
|
|
::= { zxAnSwCardRunningVerEntry 2 }
|
|
|
|
zxAnSwCardSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The slot number"
|
|
::= { zxAnSwCardRunningVerEntry 3 }
|
|
|
|
zxAnSwCardFileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version file name of the card."
|
|
::= { zxAnSwCardRunningVerEntry 5 }
|
|
|
|
zxAnSwCardFileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version file type of the card."
|
|
::= { zxAnSwCardRunningVerEntry 6 }
|
|
|
|
zxAnSwCardVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version tag of the card."
|
|
::= { zxAnSwCardRunningVerEntry 7 }
|
|
|
|
zxAnSwCardFileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version file length of the card."
|
|
::= { zxAnSwCardRunningVerEntry 8 }
|
|
|
|
zxAnSwCardBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwCardRunningVerEntry 9 }
|
|
|
|
zxAnSwCardBootwareFileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bootrom file name of the card."
|
|
::= { zxAnSwCardRunningVerEntry 10 }
|
|
|
|
zxAnSwCardBootwareFileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bootrom file type of the card."
|
|
::= { zxAnSwCardRunningVerEntry 11 }
|
|
|
|
zxAnSwCardBootwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bootrom tag of the card."
|
|
::= { zxAnSwCardRunningVerEntry 12 }
|
|
|
|
zxAnSwCardBootwareFileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bootrom file length of the card."
|
|
::= { zxAnSwCardRunningVerEntry 13 }
|
|
|
|
zxAnSwCardBootwareBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwCardRunningVerEntry 14 }
|
|
|
|
zxAnSwCardFirmware1FileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file name of the card."
|
|
::= { zxAnSwCardRunningVerEntry 15 }
|
|
|
|
zxAnSwCardFirmware1FileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file type of the card."
|
|
::= { zxAnSwCardRunningVerEntry 16 }
|
|
|
|
zxAnSwCardFirmware1Version OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware tag of the card."
|
|
::= { zxAnSwCardRunningVerEntry 17 }
|
|
|
|
zxAnSwCardFirmware1FileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file length of the card."
|
|
::= { zxAnSwCardRunningVerEntry 18 }
|
|
|
|
zxAnSwCardFirmware1BuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwCardRunningVerEntry 19 }
|
|
|
|
zxAnSwCardFirmware2FileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file name of the card."
|
|
::= { zxAnSwCardRunningVerEntry 20 }
|
|
|
|
zxAnSwCardFirmware2FileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file type of the card."
|
|
::= { zxAnSwCardRunningVerEntry 21 }
|
|
|
|
zxAnSwCardFirmware2Version OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware tag of the card."
|
|
::= { zxAnSwCardRunningVerEntry 22 }
|
|
|
|
zxAnSwCardFirmware2FileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file length of the card."
|
|
::= { zxAnSwCardRunningVerEntry 23 }
|
|
|
|
zxAnSwCardFirmware2BuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwCardRunningVerEntry 24 }
|
|
|
|
zxAnSwCardFirmware3FileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file name of the card."
|
|
::= { zxAnSwCardRunningVerEntry 25 }
|
|
|
|
zxAnSwCardFirmware3FileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file type of the card."
|
|
::= { zxAnSwCardRunningVerEntry 26 }
|
|
|
|
zxAnSwCardFirmware3Version OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware tag of the card."
|
|
::= { zxAnSwCardRunningVerEntry 27 }
|
|
|
|
zxAnSwCardFirmware3FileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file length of the card."
|
|
::= { zxAnSwCardRunningVerEntry 28 }
|
|
|
|
zxAnSwCardFirmware3BuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwCardRunningVerEntry 29 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 2. Subcard Running Software Information Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwSubcardRunningVerTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwSubcardRunningVerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table includes the sub card version information."
|
|
::= { zxAnCardSwObjects 3 }
|
|
|
|
zxAnSwSubcardRunningVerEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwSubcardRunningVerEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in zxAnSwSubcardRunningVerTable."
|
|
INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot,
|
|
zxAnSwSubcardSlot }
|
|
::= { zxAnSwSubcardRunningVerTable 1 }
|
|
|
|
ZxAnSwSubcardRunningVerEntry ::= SEQUENCE {
|
|
zxAnSwSubcardSlot Integer32,
|
|
zxAnSwSubcardFileName DisplayString,
|
|
zxAnSwSubcardFileType DisplayString,
|
|
zxAnSwSubcardVersion DisplayString,
|
|
zxAnSwSubcardFileLen Integer32,
|
|
zxAnSwSubcardBuildTime DateAndTime,
|
|
zxAnSwSubcardBootwareFileName DisplayString,
|
|
zxAnSwSubcardBootwareFileType DisplayString,
|
|
zxAnSwSubcardBootwareVersion DisplayString,
|
|
zxAnSwSubcardBootwareFileLen Integer32,
|
|
zxAnSwSubcardBootwareBuildTime DateAndTime,
|
|
zxAnSwSubcardFirmwareFileName DisplayString,
|
|
zxAnSwSubcardFirmwareFileType DisplayString,
|
|
zxAnSwSubcardFirmwareVersion DisplayString,
|
|
zxAnSwSubcardFirmwareFileLen Integer32,
|
|
zxAnSwSubcardFirmwareBuildTime DateAndTime
|
|
}
|
|
|
|
zxAnSwSubcardSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The slot number of the subcard"
|
|
::= { zxAnSwSubcardRunningVerEntry 1 }
|
|
|
|
zxAnSwSubcardFileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version file name of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 3 }
|
|
|
|
zxAnSwSubcardFileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version file type of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 4 }
|
|
|
|
zxAnSwSubcardVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version tag of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 5 }
|
|
|
|
zxAnSwSubcardFileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version file length of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 6 }
|
|
|
|
zxAnSwSubcardBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwSubcardRunningVerEntry 7 }
|
|
|
|
zxAnSwSubcardBootwareFileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bootrom file name of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 8 }
|
|
|
|
zxAnSwSubcardBootwareFileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bootrom file type of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 9 }
|
|
|
|
zxAnSwSubcardBootwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bootrom tag of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 10 }
|
|
|
|
zxAnSwSubcardBootwareFileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The bootrom file length of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 11 }
|
|
|
|
zxAnSwSubcardBootwareBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwSubcardRunningVerEntry 12 }
|
|
|
|
zxAnSwSubcardFirmwareFileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file name of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 13 }
|
|
|
|
zxAnSwSubcardFirmwareFileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file type of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 14 }
|
|
|
|
zxAnSwSubcardFirmwareVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware tag of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 15 }
|
|
|
|
zxAnSwSubcardFirmwareFileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The firmware file length of the card."
|
|
::= { zxAnSwSubcardRunningVerEntry 16 }
|
|
|
|
zxAnSwSubcardFirmwareBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwSubcardRunningVerEntry 17 }
|
|
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 3.Saved Software information Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwImageTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwImageEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table includes the saved version information in
|
|
version area MP."
|
|
::= { zxAnCardSwObjects 4 }
|
|
|
|
zxAnSwImageEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwImageEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in zxAnSwImageTable."
|
|
INDEX {zxAnSwCardRack,zxAnSwCardShelf,zxAnSwCardSlot,
|
|
zxAnSwImageFileName}
|
|
::= { zxAnSwImageTable 1 }
|
|
|
|
ZxAnSwImageEntry ::= SEQUENCE {
|
|
zxAnSwImageFileName DisplayString,
|
|
zxAnSwImageFileType DisplayString,
|
|
zxAnSwImageVersion DisplayString,
|
|
zxAnSwImageFileLen Integer32,
|
|
zxAnSwImageBuildTime DateAndTime,
|
|
zxAnSwImageActiveStatus INTEGER,
|
|
zxAnSwImageDownloadTime DateAndTime
|
|
}
|
|
|
|
|
|
zxAnSwImageFileName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION ""
|
|
::= { zxAnSwImageEntry 1 }
|
|
|
|
zxAnSwImageFileType OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version file type on the saved area."
|
|
::= { zxAnSwImageEntry 2 }
|
|
|
|
zxAnSwImageVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version tag on the saved area."
|
|
::= { zxAnSwImageEntry 3 }
|
|
|
|
zxAnSwImageFileLen OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version file length on the saved area."
|
|
::= { zxAnSwImageEntry 4 }
|
|
|
|
zxAnSwImageBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of version build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwImageEntry 5 }
|
|
|
|
zxAnSwImageActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
active(1),
|
|
inactive(2),
|
|
none(3)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The status of saved MP version on the saved area.
|
|
active(1): active MP version.
|
|
inactive(2): inactive MP version.
|
|
none(3): NP version, don't have active attribute.
|
|
"
|
|
::= { zxAnSwImageEntry 6 }
|
|
|
|
zxAnSwImageDownloadTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The downloading time of the version file."
|
|
::= { zxAnSwImageEntry 7 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 4 Software Manual Update Management Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwManualUpdateRack OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The rack number.
|
|
The multi-variables binding rule should be complied
|
|
with when a manager manual updates software. According
|
|
to this rule,all the related mib variables must be
|
|
included in one SNMP set operation.
|
|
|
|
There are two types of variables: mandatory and
|
|
optional. All of the mandatory variables must be
|
|
included in one SNMP set operation. Optional variables
|
|
may be included in one SNMP set operation with the
|
|
mandatory variables, but must not be used alone.
|
|
|
|
To manual update software, the mandatory and optional
|
|
variables are as follows:
|
|
mandatoty: zxAnSwManualUpdateRack,
|
|
zxAnSwManualUpdateShelf,
|
|
zxAnSwManualUpdateSlotList,
|
|
zxAnSwManualUpdateSwType
|
|
optional : none
|
|
|
|
To manual update subcard software, the mandatory and
|
|
optional variables are as follows:
|
|
mandatoty: zxAnSwManualUpdateRack,
|
|
zxAnSwManualUpdateShelf,
|
|
zxAnSwManualUpdateSlotList,
|
|
zxAnSwManualUpdateSwType,
|
|
zxAnSwManualUpdateSubcardList
|
|
optional : none
|
|
"
|
|
::= { zxAnSwManualUpdateGlobalObjects 1 }
|
|
|
|
zxAnSwManualUpdateShelf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The shelf number.
|
|
This variable must comply with the multi-variables
|
|
binding rule described in zxAnSwManualUpdateRack."
|
|
::= { zxAnSwManualUpdateGlobalObjects 2 }
|
|
|
|
zxAnSwManualUpdateSlotList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0 .. 64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The slot number. updating version file from MP to NP.
|
|
They can be updated in batch. For example: '1,2,3'
|
|
This variable must comply with the multi-variables
|
|
binding rule described in zxAnSwManualUpdateRack."
|
|
::= { zxAnSwManualUpdateGlobalObjects 3 }
|
|
|
|
zxAnSwManualUpdateSwType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bootware(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software type is special to update.
|
|
This variable must comply with the multi-variables
|
|
binding rule described in zxAnSwManualUpdateRack.
|
|
bootware(1): update bootware."
|
|
::= { zxAnSwManualUpdateGlobalObjects 4 }
|
|
|
|
zxAnSwManualUpdateSubcardList OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0 .. 64))
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The subcard number. updating version file from MP to subcard.
|
|
They can be updated in batch. For example: '1,2,3'
|
|
This variable must comply with the multi-variables
|
|
binding rule described in zxAnSwManualUpdateRack.
|
|
If zxAnSwManualUpdateSlotList is '1,2' and
|
|
zxAnSwManualUpdateSubcardList is '3,4', the actual operation object
|
|
like 'slot.subcard' is '1.3', '1.4', '2.3', '2.4'."
|
|
::= { zxAnSwManualUpdateGlobalObjects 5 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 5. Software Manual Update Status Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwManualUpdateStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwManualUpdateStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table includes the version updating status
|
|
information."
|
|
::= { zxAnSwManualUpdateObjects 5 }
|
|
|
|
zxAnSwManualUpdateStatusEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwManualUpdateStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in zxAnSwManualUpdateStatusTable."
|
|
INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot,
|
|
zxAnSwManualUpdateSoftwareType }
|
|
::= { zxAnSwManualUpdateStatusTable 1 }
|
|
|
|
ZxAnSwManualUpdateStatusEntry ::= SEQUENCE {
|
|
zxAnSwManualUpdateSoftwareType INTEGER,
|
|
zxAnSwManualUpdateStatus INTEGER,
|
|
zxAnSwManualFailedReason INTEGER
|
|
}
|
|
|
|
zxAnSwManualUpdateSoftwareType OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
bootware(1)
|
|
-- Update bootware.
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The software type when updating version."
|
|
::= { zxAnSwManualUpdateStatusEntry 1 }
|
|
|
|
zxAnSwManualUpdateStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {negotiating(1),downloading(2),failed(3),
|
|
success(4),sameversion(5)}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version status when updating version.
|
|
negotiating(1):negotiating not starting
|
|
downloading(2):updating from MP
|
|
failed(3): update failed
|
|
success(4): update successly
|
|
sameVersion(5):not need update
|
|
"
|
|
::= { zxAnSwManualUpdateStatusEntry 2 }
|
|
|
|
zxAnSwManualFailedReason OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
{
|
|
noError(1),
|
|
-- no error.
|
|
|
|
noSupportCardHwVersion(2),
|
|
-- control card doesn't support the current card hardware
|
|
-- version.
|
|
|
|
mismatchCardHwVersion (3),
|
|
-- control card's configuration and the current card
|
|
-- hardware version are mismatch.
|
|
|
|
mismatchCardConfData (4),
|
|
-- control card's configuration and the current card
|
|
-- configuration data are mismatch.
|
|
|
|
noSwInNe (5),
|
|
-- software for this card doesn't exist in control card.
|
|
|
|
cardUpdateSwFailed (6)
|
|
-- the current card software update failed.
|
|
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The reason when updating version failed."
|
|
::= { zxAnSwManualUpdateStatusEntry 3 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 6. Subcard Software Manual Update Status Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwSubcardMUpdateStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwSubcardMUpdateStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes the subcard software updating status
|
|
information."
|
|
::= { zxAnSwManualUpdateObjects 6 }
|
|
|
|
zxAnSwSubcardMUpdateStatusEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwSubcardMUpdateStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in zxAnSwSubcardMUpdateStatusTable."
|
|
INDEX { zxAnSwCardRack, zxAnSwCardShelf, zxAnSwCardSlot,
|
|
zxAnSwSubcardSlot, zxAnSwSubcardMUpdateSoftwareType }
|
|
::= { zxAnSwSubcardMUpdateStatusTable 1 }
|
|
|
|
ZxAnSwSubcardMUpdateStatusEntry ::= SEQUENCE {
|
|
zxAnSwSubcardMUpdateSoftwareType INTEGER,
|
|
zxAnSwSubcardMUpdateStatus INTEGER,
|
|
zxAnSwSubcardMUpdateFailedReason INTEGER
|
|
}
|
|
|
|
zxAnSwSubcardMUpdateSoftwareType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
bootware(1)
|
|
}
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The software type when updating subcard software.
|
|
bootware(1): update bootware."
|
|
::= { zxAnSwSubcardMUpdateStatusEntry 1 }
|
|
|
|
|
|
zxAnSwSubcardMUpdateStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
negotiating(1),
|
|
downloading(2),
|
|
failed(3),
|
|
success(4),
|
|
sameversion(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The updating status when updating subcard software.
|
|
negotiating(1): negotiating not starting.
|
|
downloading(2): updating from MP.
|
|
failed(3): update failed.
|
|
success(4): update successfully.
|
|
sameVersion(5): not need to update.
|
|
"
|
|
::= { zxAnSwSubcardMUpdateStatusEntry 2 }
|
|
|
|
zxAnSwSubcardMUpdateFailedReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noError(1),
|
|
noSupportCardHwVersion(2),
|
|
mismatchCardHwVersion(3),
|
|
mismatchCardConfData(4),
|
|
noSwInNe(5),
|
|
cardUpdateSwFailed(6)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The reason when updating subcard software failed.
|
|
noError(1): no error.
|
|
noSupportCardHwVersion(2): control card doesn't support the
|
|
current card hardware version.
|
|
mismatchCardHwVersion(3): control card's configuration and the
|
|
current card hardware version are mismatch.
|
|
mismatchCardConfData(4): control card's configuration and the
|
|
current card configuration data are mismatch.
|
|
noSwInNe(5): software for this card doesn't exist in control card.
|
|
cardUpdateSwFailed(6): the current card software update failed."
|
|
::= { zxAnSwSubcardMUpdateStatusEntry 3 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 7. Software Automatic Update Check Management Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwAutoUpdateChkEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the software periodic check function.
|
|
|
|
The multi-variables binding rule should be complied with
|
|
when a software periodic check. According to this rule,
|
|
all the related mib variables must be included in one SNMP
|
|
set operation.
|
|
|
|
There are two types of variables: mandatory and optional.
|
|
All of the mandatory variables must be included in one SNMP
|
|
set operation. Optional variables may be included in one
|
|
SNMP set operation with the mandatory variables, but must
|
|
not be used alone.
|
|
|
|
To configure software periodic check(except disable
|
|
software periodic check function), the mandatory and
|
|
optional variables are as follows:
|
|
mandatoty: zxAnSwAutoUpdateChkEnable,
|
|
zxAnSwAutoUpdateChkStartTime,
|
|
zxAnSwAutoUpdateChkInterval
|
|
optional : none
|
|
"
|
|
|
|
DEFVAL { disable }
|
|
::= { zxAnSwAutoUpdateChkObjects 1 }
|
|
|
|
zxAnSwAutoUpdateChkStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time of software periodic check.
|
|
For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33).
|
|
|
|
This variable must comply with the multi-variables binding
|
|
rule described in zxAnSwAutoUpdateChkEnable.
|
|
"
|
|
::= { zxAnSwAutoUpdateChkObjects 2 }
|
|
|
|
zxAnSwAutoUpdateChkInterval OBJECT-TYPE
|
|
SYNTAX Integer32(0..8760)
|
|
UNITS "hours"
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The interval of software periodic check.
|
|
Value 0 means unconfigured.
|
|
Unit is hour.
|
|
|
|
This variable must comply with the multi-variables binding
|
|
rule described in zxAnSwAutoUpdateChkEnable.
|
|
"
|
|
DEFVAL { 24 }
|
|
::= { zxAnSwAutoUpdateChkObjects 3 }
|
|
|
|
zxAnSwAutoUpdateCurrChkStartTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The start time of current software periodic check.
|
|
For example:yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwAutoUpdateChkObjects 20 }
|
|
|
|
zxAnSwAutoUpdateChkDifferFiles OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The different files name between NE and file server.
|
|
File name is separated by ',', For example:xxx,xxx,xxx."
|
|
::= { zxAnSwAutoUpdateChkObjects 21 }
|
|
|
|
zxAnSwAutoUpdateChkStatus OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notStarted(1),
|
|
inProgress(2),
|
|
success(3),
|
|
failed(4)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of software periodic check.
|
|
notStarted(1): Automatic update check not start
|
|
inProgress(2): Automatic update check in progress
|
|
success(3): Automatic update check successful
|
|
failed(4): Automatic update check failed
|
|
"
|
|
::= { zxAnSwAutoUpdateChkObjects 22 }
|
|
|
|
zxAnSwAutoUpdateChkFailedReason OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
noError(1),
|
|
fileServerUnconfigured(2),
|
|
fileServerConnectFailed(3),
|
|
fileServerLoginFailed(4),
|
|
fileServerPathError(5),
|
|
fileServerProtocolTypeError(6),
|
|
deviceCheckFailed(7),
|
|
otherErrors(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The failed reason of software periodic check.
|
|
noError(1): Automatic update check successful
|
|
or not start
|
|
fileServerUnconfigured(2): Automatic update file server
|
|
is not configure
|
|
fileServerConnectFailed(3): File server connect failed
|
|
fileServerLoginFailed(4): File server configure is not
|
|
correct
|
|
fileServerPathError(5): File server configure path is
|
|
not correct
|
|
fileServerProtocolTypeError(6): File server configure protocol
|
|
type is not correct
|
|
deviceCheckFailed(7): NE flash error
|
|
otherErrors(255): Error is not include above list
|
|
"
|
|
::= { zxAnSwAutoUpdateChkObjects 23 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 8. Software Automatic Update Management Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwAutoUpdateAction OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
start(1)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The automatic update action.
|
|
It means to start the automatic update progress."
|
|
::= { zxAnSwAutoUpdateOperObjects 1 }
|
|
|
|
zxAnSwAutoUpdateActiveEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the software active function. Active means to
|
|
reset card except control card."
|
|
DEFVAL { enable }
|
|
::= { zxAnSwAutoUpdateOperObjects 2 }
|
|
|
|
zxAnSwAutoUpdateSwBackupEnable OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
enable(1),
|
|
disable(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Enable or disable the version file backup function."
|
|
DEFVAL { enable }
|
|
::= { zxAnSwAutoUpdateOperObjects 3 }
|
|
|
|
zxAnSwAutoUpdateStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
notStarted(1),
|
|
updateStarting(2),
|
|
backingUpFile(3),
|
|
versionFileAnalyzing(4),
|
|
versionFileDownloading(5),
|
|
versionFileDownloadComplete(6),
|
|
masterSlaveSynchronizing(7),
|
|
masterSlaveSyncComplete(8),
|
|
versionFileLoading(9),
|
|
bootUpdating(10),
|
|
bootUpdateComplete(11),
|
|
updateSuccess(12),
|
|
readyToReboot(13),
|
|
sameVersion(14),
|
|
updateFailed(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The status of automatic update.
|
|
notStarted(1): Not start
|
|
updateStarting(2): Update Start
|
|
backingUpFile(3): Backup software before update
|
|
versionFileAnalyzing(4): Software analyzing
|
|
versionFileDownloading(5): Software downloading
|
|
versionFileDownloadComplete(6):Software download completed
|
|
masterSlaveSynchronizing(7): Synchronize software to slave board
|
|
masterSlaveSyncComplete(8): Synchronize software completed
|
|
versionFileLoading(9): Load software to card
|
|
bootUpdating(10): Update bootrom
|
|
bootUpdateComplete(11): Update bootrom completed
|
|
updateSuccess(12): Update successful
|
|
readyToReboot(13): Update had beed finished,ready to reboot
|
|
sameVersion(14): Update is not need for same version
|
|
updateFailed(255): Update failed
|
|
"
|
|
::= { zxAnSwAutoUpdateOperObjects 20 }
|
|
|
|
zxAnSwAutoUpdateCurrFileName OBJECT-TYPE
|
|
SYNTAX DisplayString(SIZE(0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of current file which is updated."
|
|
::= { zxAnSwAutoUpdateOperObjects 21 }
|
|
|
|
zxAnSwAutoUpdateCurrFileSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "bytes"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The size of current file which is updated."
|
|
::= { zxAnSwAutoUpdateOperObjects 22 }
|
|
|
|
zxAnSwAutoUpdateCurrFileProgress OBJECT-TYPE
|
|
SYNTAX Integer32(0..100)
|
|
UNITS "percent"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The updating progress of current file."
|
|
::= { zxAnSwAutoUpdateOperObjects 23 }
|
|
|
|
zxAnSwAutoUpdateTotalFiles OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Total count of files will be updated."
|
|
::= { zxAnSwAutoUpdateOperObjects 24 }
|
|
|
|
zxAnSwAutoUpdateSuccessFiles OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Count of files which are updated successfully."
|
|
::= { zxAnSwAutoUpdateOperObjects 25 }
|
|
|
|
zxAnSwAutoUpdateFailedReason OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
noError(1),
|
|
backupDataError(2),
|
|
backupLogError(3),
|
|
backupConfigurationError(4),
|
|
backupVersionFileError(5),
|
|
backupOtherError(6),
|
|
analyzingConfigurationError(7),
|
|
analyzingVersionFileError(8),
|
|
diskFull(9),
|
|
downloadingVersionFileError(10),
|
|
updateVersionFileError(11),
|
|
updateBootError(12),
|
|
masterSlaveSynchronizeError(13),
|
|
updateConflict(14),
|
|
unavailableServer(15),
|
|
slaveCardNotInService(16),
|
|
fileNotExist(17),
|
|
otherErrors(255)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The failed reason of automatic update.
|
|
noError(1), Update is not start or successful
|
|
backupDataError(2), Backup data failed
|
|
backupLogError(3), Backup log failed
|
|
backupConfigurationError(4), Backup configuration failed
|
|
backupVersionFileError(5), Backup software failed
|
|
backupOtherError(6), Backup file failed is not above
|
|
list
|
|
analyzingConfigurationError(7), Analyze configuration error
|
|
analyzingVersionFileError(8), Analyze software error
|
|
diskFull(9), NE disk is full
|
|
downloadingVersionFileError(10),Download software failed
|
|
updateVersionFileError(11), Update software failed
|
|
updateBootError(12), Update bootrom failed
|
|
masterSlaveSynchronizeError(13),Synchronize software to slave board
|
|
failed
|
|
updateConflict(14), Other update is executing
|
|
unavailableServer(15), File server configure failed
|
|
slaveCardNotInService(16), Slave board is not inservice
|
|
fileNotExist(17), File not exist on server
|
|
otherErrors(255) Other errors is not list above
|
|
"
|
|
::= { zxAnSwAutoUpdateOperObjects 26 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 9. Software Swap Management Table
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwSwapRack OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " The Rack No. is used for swap version .
|
|
The multi-variables binding rule should be complied
|
|
with when swap software. According to this rule,
|
|
all the related mib variables must be included in one
|
|
SNMP set operation.
|
|
|
|
There are two types of variables: mandatory and optional.
|
|
All of the mandatory variables must be included in one
|
|
SNMP set operation. Optional variables may be included
|
|
in one SNMP set operation with the mandatory variables,
|
|
but must not be used alone.
|
|
|
|
To swap software, the mandatory and optional variables
|
|
are as follows:
|
|
mandatoty:zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot
|
|
optional :none
|
|
"
|
|
|
|
::= { zxAnSwSwapGlobalObjects 1 }
|
|
|
|
zxAnSwSwapShelf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " The Shelf number is used for swap version.
|
|
|
|
This variable must comply with the multi-variables
|
|
binding rule described in zxAnSwSwapRack.
|
|
"
|
|
|
|
::= { zxAnSwSwapGlobalObjects 2 }
|
|
|
|
zxAnSwSwapSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION " The slot number is used for swap version.
|
|
|
|
This variable must comply with the multi-variables
|
|
binding rule described in zxAnSwSwapRack.
|
|
"
|
|
|
|
::= { zxAnSwSwapGlobalObjects 3 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- 10. Saved Patch Information Table
|
|
------------------------------------------------------------------------------
|
|
zxAnSwSavedPatchTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwSavedPatchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table includes the saved patch information."
|
|
::= { zxAnCardPatchObjects 2 }
|
|
|
|
zxAnSwSavedPatchEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwSavedPatchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in zxAnSwSavedPatchTable."
|
|
INDEX { zxAnSwPatchRack,zxAnSwPatchShelf,
|
|
zxAnSwPatchSlot,zxAnSwPatchName }
|
|
::= { zxAnSwSavedPatchTable 1 }
|
|
|
|
ZxAnSwSavedPatchEntry ::= SEQUENCE {
|
|
zxAnSwPatchRack Integer32,
|
|
zxAnSwPatchShelf Integer32,
|
|
zxAnSwPatchSlot Integer32,
|
|
zxAnSwPatchName DisplayString,
|
|
zxAnSwPatchOwnerSwVersion DisplayString,
|
|
zxAnSwPatchVersion DisplayString,
|
|
zxAnSwPatchSize Integer32,
|
|
zxAnSwPatchBuildTime DateAndTime,
|
|
zxAnSwPatchConfActiveStatus INTEGER,
|
|
zxAnSwPatchDescription DisplayString
|
|
}
|
|
|
|
zxAnSwPatchRack OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The rack number."
|
|
::= { zxAnSwSavedPatchEntry 1 }
|
|
|
|
zxAnSwPatchShelf OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The shelf number."
|
|
::= { zxAnSwSavedPatchEntry 2 }
|
|
|
|
zxAnSwPatchSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The slot number."
|
|
::= { zxAnSwSavedPatchEntry 3 }
|
|
|
|
zxAnSwPatchName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The patch file name."
|
|
::= { zxAnSwSavedPatchEntry 4 }
|
|
|
|
zxAnSwPatchOwnerSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The software version of the patch belonging to."
|
|
::= { zxAnSwSavedPatchEntry 5 }
|
|
|
|
zxAnSwPatchVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version tag of the patch."
|
|
::= { zxAnSwSavedPatchEntry 6 }
|
|
|
|
zxAnSwPatchSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The patch file length."
|
|
::= { zxAnSwSavedPatchEntry 7 }
|
|
|
|
zxAnSwPatchBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of patch build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwSavedPatchEntry 8 }
|
|
|
|
zxAnSwPatchConfActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
activated(1),
|
|
deactivated(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION "The configured active status of the patch file.
|
|
activated -- to activate the patch file.
|
|
deactivated -- to deactivate the patch file."
|
|
DEFVAL { deactivated }
|
|
::= { zxAnSwSavedPatchEntry 9 }
|
|
|
|
zxAnSwPatchDescription OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 255 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The patch description."
|
|
::= { zxAnSwSavedPatchEntry 10 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- 11. Card Patch Running Status Information Table
|
|
------------------------------------------------------------------------------
|
|
zxAnSwCardPatchRunStatusTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwCardPatchRunStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes the patch running status information of the
|
|
card."
|
|
::= { zxAnCardPatchObjects 3 }
|
|
|
|
zxAnSwCardPatchRunStatusEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwCardPatchRunStatusEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in zxAnSwCardPatchRunStatusTable."
|
|
INDEX
|
|
{ zxAnSwPatchRack,
|
|
zxAnSwPatchShelf,
|
|
zxAnSwPatchSlot,
|
|
zxAnSwCardPatchName }
|
|
::= { zxAnSwCardPatchRunStatusTable 1 }
|
|
|
|
ZxAnSwCardPatchRunStatusEntry ::= SEQUENCE {
|
|
zxAnSwCardPatchName DisplayString,
|
|
zxAnSwCardPatchOwnerSwVersion DisplayString,
|
|
zxAnSwCardPatchVersion DisplayString,
|
|
zxAnSwCardPatchSize Integer32,
|
|
zxAnSwCardPatchBuildTime DateAndTime,
|
|
zxAnSwCardPatchActivatedTime DateAndTime,
|
|
zxAnSwCardPatchDescription DisplayString,
|
|
zxAnSwCardPatchRunningStatus INTEGER
|
|
}
|
|
|
|
zxAnSwCardPatchName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The patch file name of the card."
|
|
::= { zxAnSwCardPatchRunStatusEntry 1 }
|
|
|
|
zxAnSwCardPatchOwnerSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The software version of the patch belonging to."
|
|
::= { zxAnSwCardPatchRunStatusEntry 2 }
|
|
|
|
zxAnSwCardPatchVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version tag of the patch."
|
|
::= { zxAnSwCardPatchRunStatusEntry 3 }
|
|
|
|
zxAnSwCardPatchSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The patch file length."
|
|
::= { zxAnSwCardPatchRunStatusEntry 4 }
|
|
|
|
zxAnSwCardPatchBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of patch build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwCardPatchRunStatusEntry 5 }
|
|
|
|
zxAnSwCardPatchActivatedTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of the patch activated. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwCardPatchRunStatusEntry 6 }
|
|
|
|
zxAnSwCardPatchDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The patch description."
|
|
::= { zxAnSwCardPatchRunStatusEntry 7 }
|
|
|
|
zxAnSwCardPatchRunningStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
activatingSucceeded(1),
|
|
activatingFailed(2),
|
|
waitingToBeActivated(3),
|
|
resettingCardNeeded(4),
|
|
mismatched(5)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The patch running status.
|
|
activatingSucceeded(1) : value 1 means the activating operation
|
|
of the patch file is succeeded.
|
|
activatingFailed(2) : value 2 means the activating operation
|
|
of the patch file is failed.
|
|
waitingToBeActivated(3): value 3 means the patch file is waiting
|
|
to be activated.
|
|
resettingCardNeeded(4) : value 4 means the patch file has been
|
|
successfully activated and the card
|
|
needs to be reset.
|
|
mismatched(5) : value 5 means the version of the patch
|
|
file is not matched with the version of
|
|
the card software."
|
|
::= { zxAnSwCardPatchRunStatusEntry 8 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- 12. Subcard Running Patch Information Table
|
|
------------------------------------------------------------------------------
|
|
zxAnSwSubcardRunningPatchTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwSubcardRunningPatchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "This table includes the subcard patch information."
|
|
::= { zxAnCardPatchObjects 4 }
|
|
|
|
zxAnSwSubcardRunningPatchEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwSubcardRunningPatchEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "An entry in zxAnSwSubcardRunningPatchTable."
|
|
INDEX { zxAnSwPatchRack,zxAnSwPatchShelf,
|
|
zxAnSwPatchSlot,zxAnSwPatchSubcardSlot,
|
|
zxAnSwSubcardPatchName }
|
|
::= { zxAnSwSubcardRunningPatchTable 1 }
|
|
|
|
ZxAnSwSubcardRunningPatchEntry ::= SEQUENCE {
|
|
zxAnSwPatchSubcardSlot Integer32,
|
|
zxAnSwSubcardPatchName DisplayString,
|
|
zxAnSwSubcardPatchOwnerSwVersion DisplayString,
|
|
zxAnSwSubcardPatchVersion DisplayString,
|
|
zxAnSwSubcardPatchSize Integer32,
|
|
zxAnSwSubcardPatchBuildTime DateAndTime,
|
|
zxAnSwSubcardPatchActivatedTime DateAndTime,
|
|
zxAnSwSubcardPatchDescription DisplayString
|
|
}
|
|
|
|
zxAnSwPatchSubcardSlot OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The slot number of the subcard."
|
|
::= { zxAnSwSubcardRunningPatchEntry 1 }
|
|
|
|
zxAnSwSubcardPatchName OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The file name of the patch "
|
|
::= { zxAnSwSubcardRunningPatchEntry 2 }
|
|
|
|
zxAnSwSubcardPatchOwnerSwVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The software version of the patch belonging to."
|
|
::= { zxAnSwSubcardRunningPatchEntry 3 }
|
|
|
|
zxAnSwSubcardPatchVersion OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 64 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version tag of the patch."
|
|
::= { zxAnSwSubcardRunningPatchEntry 4 }
|
|
|
|
zxAnSwSubcardPatchSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The patch file length."
|
|
::= { zxAnSwSubcardRunningPatchEntry 5 }
|
|
|
|
zxAnSwSubcardPatchBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of patch build. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwSubcardRunningPatchEntry 6 }
|
|
|
|
zxAnSwSubcardPatchActivatedTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The time of the patch activated. For example:
|
|
yyyy-mm-dd HH:MM:SS.(2001-01-01 02:22:33)."
|
|
::= { zxAnSwSubcardRunningPatchEntry 7 }
|
|
|
|
zxAnSwSubcardPatchDescription OBJECT-TYPE
|
|
SYNTAX DisplayString ( SIZE ( 0 .. 255 ) )
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The patch description."
|
|
::= { zxAnSwSubcardRunningPatchEntry 8 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- 13. Saved Patch Package information Table
|
|
------------------------------------------------------------------------------
|
|
zxAnSwSavedPatchPackageTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwSavedPatchPackageEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes the saved patch package information."
|
|
::= { zxAnCardPatchObjects 5 }
|
|
|
|
zxAnSwSavedPatchPackageEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwSavedPatchPackageEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in zxAnSwSavedPatchPackageTable."
|
|
INDEX
|
|
{ zxAnSwPatchRack,
|
|
zxAnSwPatchShelf,
|
|
zxAnSwPatchSlot,
|
|
zxAnSwPatchPkgName }
|
|
::= { zxAnSwSavedPatchPackageTable 1 }
|
|
|
|
ZxAnSwSavedPatchPackageEntry ::= SEQUENCE {
|
|
zxAnSwPatchPkgName DisplayString,
|
|
zxAnSwPatchPkgVersion DisplayString,
|
|
zxAnSwPatchPkgSize Integer32,
|
|
zxAnSwPatchPkgBuildTime DateAndTime,
|
|
zxAnSwPatchPkgDescription DisplayString,
|
|
zxAnSwPatchPkgConfActiveStatus INTEGER,
|
|
zxAnSwPatchPkgActualActiveStatus INTEGER
|
|
}
|
|
|
|
zxAnSwPatchPkgName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION "The name of the patch package."
|
|
::= { zxAnSwSavedPatchPackageEntry 1 }
|
|
|
|
zxAnSwPatchPkgVersion OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..64))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The version of the patch package."
|
|
::= { zxAnSwSavedPatchPackageEntry 2 }
|
|
|
|
zxAnSwPatchPkgSize OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
UNITS "byte"
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The size of the patch package."
|
|
::= { zxAnSwSavedPatchPackageEntry 3 }
|
|
|
|
zxAnSwPatchPkgBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The build time of patch package."
|
|
::= { zxAnSwSavedPatchPackageEntry 4 }
|
|
|
|
zxAnSwPatchPkgDescription OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..255))
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION "The description of the patch package."
|
|
::= { zxAnSwSavedPatchPackageEntry 5 }
|
|
|
|
zxAnSwPatchPkgConfActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
activated(1),
|
|
deactivated(2)
|
|
}
|
|
MAX-ACCESS read-write
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The configured active status of the patch package.
|
|
activated(1) : value 1 means the configured active status of
|
|
the patch package is activated.
|
|
deactivated(2) : value 2 means the configured active status of
|
|
the patch package is deactivated."
|
|
DEFVAL { deactivated }
|
|
::= { zxAnSwSavedPatchPackageEntry 6 }
|
|
|
|
zxAnSwPatchPkgActualActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
activated(1),
|
|
deactivated(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The actual active status of the patch package.
|
|
activated(1) : value 1 means the patch package is activated.
|
|
deactivated(2) : value 2 means the patch package is deactivated."
|
|
::= { zxAnSwSavedPatchPackageEntry 7 }
|
|
|
|
------------------------------------------------------------------------------
|
|
-- 14. Saved Patch Package File Information Table
|
|
------------------------------------------------------------------------------
|
|
zxAnSwSavedPatchPackageFileTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ZxAnSwSavedPatchPackageFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"This table includes the information of the file inside the patch
|
|
package."
|
|
::= { zxAnCardPatchObjects 6 }
|
|
|
|
zxAnSwSavedPatchPackageFileEntry OBJECT-TYPE
|
|
SYNTAX ZxAnSwSavedPatchPackageFileEntry
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"An entry in zxAnSwSavedPatchPackageFileTable."
|
|
INDEX
|
|
{ zxAnSwPatchRack,
|
|
zxAnSwPatchShelf,
|
|
zxAnSwPatchSlot,
|
|
zxAnSwPatchPkgName,
|
|
zxAnSwPatchPkgFileName }
|
|
::= { zxAnSwSavedPatchPackageFileTable 1 }
|
|
|
|
ZxAnSwSavedPatchPackageFileEntry ::= SEQUENCE {
|
|
zxAnSwPatchPkgFileName DisplayString,
|
|
zxAnSwPatchPkgFileBuildTime DateAndTime,
|
|
zxAnSwPatchPkgFileNeedResetCard INTEGER,
|
|
zxAnSwPatchPkgFileActiveStatus INTEGER
|
|
}
|
|
|
|
zxAnSwPatchPkgFileName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..64))
|
|
MAX-ACCESS not-accessible
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The name of the file inside the patch package."
|
|
::= { zxAnSwSavedPatchPackageFileEntry 1 }
|
|
|
|
zxAnSwPatchPkgFileBuildTime OBJECT-TYPE
|
|
SYNTAX DateAndTime
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The build time of the file inside the patch package."
|
|
::= { zxAnSwSavedPatchPackageFileEntry 2 }
|
|
|
|
zxAnSwPatchPkgFileNeedResetCard OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
yes(1),
|
|
no(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"Whether the card needs to be reset.
|
|
yes(1) : value 1 means need to reset the card.
|
|
no(2) : value 2 means no need to reset the card."
|
|
::= { zxAnSwSavedPatchPackageFileEntry 3 }
|
|
|
|
zxAnSwPatchPkgFileActiveStatus OBJECT-TYPE
|
|
SYNTAX INTEGER{
|
|
activated(1),
|
|
deactivated(2)
|
|
}
|
|
MAX-ACCESS read-only
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The patch file active status.
|
|
activated(1) : value 1 means the patch file is activated.
|
|
deactivated(2) : value 2 means the patch file is deactivated."
|
|
::= { zxAnSwSavedPatchPackageFileEntry 4 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 21 Software Notification
|
|
-------------------------------------------------------------------------------
|
|
|
|
zxAnSwAutoUpdateFinished NOTIFICATION-TYPE
|
|
OBJECTS { zxAnSwAutoUpdateStatus,zxAnSwAutoUpdateFailedReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnSwAutoUpdateFinished is sent when the agent has detected
|
|
that the automatic update is finished."
|
|
::= { zxAnSwAutoUpdateTraps 1 }
|
|
|
|
zxAnSwAutoUpdateSwDiffer NOTIFICATION-TYPE
|
|
OBJECTS { zxAnSwAutoUpdateCurrChkStartTime,
|
|
zxAnSwAutoUpdateChkDifferFiles }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnSwAutoUpdateSwDiffer is sent when the agent has
|
|
detected different version files between NE and file server."
|
|
::= { zxAnSwAutoUpdateTraps 2 }
|
|
|
|
zxAnSwAutoUpdateSwChkFailed NOTIFICATION-TYPE
|
|
OBJECTS { zxAnSwAutoUpdateCurrChkStartTime,
|
|
zxAnSwAutoUpdateChkFailedReason }
|
|
STATUS current
|
|
DESCRIPTION
|
|
"A zxAnSwAutoUpdateSwChkFailed is sent when the agent has
|
|
detected that version check is failed."
|
|
::= { zxAnSwAutoUpdateTraps 3 }
|
|
|
|
-------------------------------------------------------------------------------
|
|
-- 31. Software Conformance
|
|
-------------------------------------------------------------------------------
|
|
zxAnSwConformance OBJECT IDENTIFIER ::= { zxAnSoftwareMib 4 }
|
|
|
|
zxAnSwCompliances OBJECT IDENTIFIER ::= { zxAnSwConformance 1 }
|
|
zxAnSwGroups OBJECT IDENTIFIER ::= { zxAnSwConformance 2 }
|
|
|
|
zxAnSwCompliance MODULE-COMPLIANCE
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The compliance statement for SNMP entities which implement the
|
|
ZTE-AN-SOFTWARE-MIB."
|
|
MODULE -- this module
|
|
|
|
MANDATORY-GROUPS {
|
|
zxAnSwCardRunVerGroup,
|
|
zxAnSwSubcardRunVerGroup,
|
|
zxAnSwImageGroup,
|
|
zxAnSwManualUpdateGroup,
|
|
zxAnSwManualUpdateStatusGroup,
|
|
zxAnSwAutoUpdateChkGroup,
|
|
zxAnSwAutoUpdateOperGroup,
|
|
zxAnSwSwapGroup,
|
|
zxAnSwNotificationsGroup
|
|
}
|
|
::= { zxAnSwCompliances 1 }
|
|
|
|
zxAnSwCardRunVerGroup OBJECT-GROUP
|
|
OBJECTS {
|
|
zxAnSwCardFileName, zxAnSwCardFileType, zxAnSwCardVersion,
|
|
zxAnSwCardFileLen, zxAnSwCardBuildTime,
|
|
zxAnSwCardBootwareFileName, zxAnSwCardBootwareFileType,
|
|
zxAnSwCardBootwareVersion, zxAnSwCardBootwareFileLen,
|
|
zxAnSwCardBootwareBuildTime, zxAnSwCardFirmware1FileName,
|
|
zxAnSwCardFirmware1FileType, zxAnSwCardFirmware1Version,
|
|
zxAnSwCardFirmware1FileLen, zxAnSwCardFirmware1BuildTime,
|
|
zxAnSwCardFirmware2FileName, zxAnSwCardFirmware2FileType,
|
|
zxAnSwCardFirmware2Version, zxAnSwCardFirmware2FileLen,
|
|
zxAnSwCardFirmware2BuildTime, zxAnSwCardFirmware3FileName,
|
|
zxAnSwCardFirmware3FileType, zxAnSwCardFirmware3Version,
|
|
zxAnSwCardFirmware3FileLen, zxAnSwCardFirmware3BuildTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent chassis
|
|
version information, include card running version information."
|
|
|
|
::= { zxAnSwGroups 1 }
|
|
|
|
zxAnSwSubcardRunVerGroup OBJECT-GROUP
|
|
OBJECTS {zxAnSwSubcardFileName,
|
|
zxAnSwSubcardFileType, zxAnSwSubcardVersion,
|
|
zxAnSwSubcardFileLen, zxAnSwSubcardBuildTime,
|
|
zxAnSwSubcardBootwareFileName, zxAnSwSubcardBootwareFileType,
|
|
zxAnSwSubcardBootwareVersion, zxAnSwSubcardBootwareFileLen,
|
|
zxAnSwSubcardBootwareBuildTime, zxAnSwSubcardFirmwareFileName,
|
|
zxAnSwSubcardFirmwareFileType, zxAnSwSubcardFirmwareVersion,
|
|
zxAnSwSubcardFirmwareFileLen, zxAnSwSubcardFirmwareBuildTime
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent chassis
|
|
version information, include subcard running version information."
|
|
|
|
::= { zxAnSwGroups 2 }
|
|
|
|
zxAnSwImageGroup OBJECT-GROUP
|
|
OBJECTS {zxAnSwImageFileType, zxAnSwImageVersion, zxAnSwImageFileLen,
|
|
zxAnSwImageBuildTime, zxAnSwImageActiveStatus
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent chassis
|
|
version information, include card saved version information."
|
|
|
|
::= { zxAnSwGroups 3 }
|
|
|
|
zxAnSwManualUpdateGroup OBJECT-GROUP
|
|
OBJECTS {zxAnSwManualUpdateRack, zxAnSwManualUpdateShelf,
|
|
zxAnSwManualUpdateSlotList, zxAnSwManualUpdateSwType
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to update software by
|
|
manual."
|
|
|
|
::= { zxAnSwGroups 4 }
|
|
|
|
zxAnSwManualUpdateStatusGroup OBJECT-GROUP
|
|
OBJECTS {zxAnSwManualUpdateStatus, zxAnSwManualFailedReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to represent chassis
|
|
software update status."
|
|
|
|
::= { zxAnSwGroups 5 }
|
|
|
|
zxAnSwAutoUpdateChkGroup OBJECT-GROUP
|
|
OBJECTS { zxAnSwAutoUpdateChkEnable, zxAnSwAutoUpdateChkStartTime,
|
|
zxAnSwAutoUpdateChkInterval,
|
|
zxAnSwAutoUpdateCurrChkStartTime,
|
|
zxAnSwAutoUpdateChkDifferFiles, zxAnSwAutoUpdateChkStatus,
|
|
zxAnSwAutoUpdateChkFailedReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to management version
|
|
automatic updating.
|
|
Automatic version check to list the different files name between
|
|
NE and file server."
|
|
|
|
::= { zxAnSwGroups 6 }
|
|
|
|
zxAnSwAutoUpdateOperGroup OBJECT-GROUP
|
|
OBJECTS { zxAnSwAutoUpdateAction, zxAnSwAutoUpdateActiveEnable,
|
|
zxAnSwAutoUpdateSwBackupEnable, zxAnSwAutoUpdateStatus,
|
|
zxAnSwAutoUpdateCurrFileName, zxAnSwAutoUpdateCurrFileSize,
|
|
zxAnSwAutoUpdateCurrFileProgress, zxAnSwAutoUpdateTotalFiles,
|
|
zxAnSwAutoUpdateSuccessFiles, zxAnSwAutoUpdateFailedReason
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to management version
|
|
automatic updating.
|
|
Automatic version update to download version from file server and
|
|
to take effect."
|
|
|
|
::= { zxAnSwGroups 7 }
|
|
|
|
zxAnSwSwapGroup OBJECT-GROUP
|
|
OBJECTS { zxAnSwSwapRack, zxAnSwSwapShelf, zxAnSwSwapSlot
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The collection of objects which are used to swap version ."
|
|
|
|
::= { zxAnSwGroups 8 }
|
|
|
|
zxAnSwNotificationsGroup OBJECT-GROUP
|
|
OBJECTS { zxAnSwAutoUpdateFinished, zxAnSwAutoUpdateSwDiffer,
|
|
zxAnSwAutoUpdateSwChkFailed
|
|
}
|
|
STATUS current
|
|
DESCRIPTION
|
|
"The notifications which indicate specific changes,
|
|
include automatic update check,automatic update status."
|
|
|
|
::= { zxAnSwGroups 9 }
|
|
END |