Initial commitHEADmain

1 files changed, 1759 insertions, 0 deletions

diff --git a/MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB b/MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB
new file mode 100644
index 0000000..b7449e1
--- /dev/null
+++ b/MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB
@@ -0,0 +1,1759 @@
+-- *******************************************************************
+-- CISCO-DOT11-ASSOCIATION-MIB.my: 
+-- CISCO DOT11 ASSOCIATION MIB file
+--
+-- April 2002, Francis Pang 
+--
+-- Copyright (c) 2002-2007 by Cisco Systems, Inc.
+-- All rights reserved.
+-- *******************************************************************
+--
+CISCO-DOT11-ASSOCIATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, 
+        OBJECT-TYPE,
+        Gauge32, 
+        Counter32,
+        Integer32,
+        Unsigned32                            
+                FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, 
+        OBJECT-GROUP       
+                FROM SNMPv2-CONF
+        TEXTUAL-CONVENTION,
+        MacAddress, 
+        TruthValue                
+                FROM SNMPv2-TC
+        ifIndex,                               
+        InterfaceIndex 
+                FROM IF-MIB
+        InetAddressType,
+        InetAddress
+                FROM INET-ADDRESS-MIB
+        SnmpAdminString
+                FROM SNMP-FRAMEWORK-MIB
+        cd11IfAuxSsid,
+        CDot11IfVlanIdOrZero, 
+        CDot11IfCipherType
+                FROM CISCO-DOT11-IF-MIB
+        ciscoMgmt                             
+                FROM CISCO-SMI;
+
+
+--********************************************************************
+--*  MODULE IDENTITY
+--********************************************************************
+
+ciscoDot11AssociationMIB MODULE-IDENTITY
+        LAST-UPDATED    "200701050000Z"
+        ORGANIZATION    "Cisco Systems Inc."
+        CONTACT-INFO  
+                "       Cisco Systems
+                        Customer Service
+
+                Postal: 170 West Tasman Drive,
+                        San Jose CA 95134-1706.
+                        USA
+
+                   Tel: +1 800 553-NETS
+
+                E-mail: cs-dot11@cisco.com"
+        DESCRIPTION
+                "This MIB module provides network management 
+                information on IEEE 802.11 wireless device 
+                association management and data packet forwarding 
+                configuration and statistics.  This MIB is an
+                extension to the IEEE802dot11-MIB and provides
+                per client based information.  
+
+                The IEEE802dot11-MIB is defined in the IEEE Std 
+                802.11-Jan 14 1999, Wireless LAN Medium Access 
+                Control and Physical Layer Specifications, by the
+                LAN MAN Standards Committee of the IEEE Computer
+                Society.
+
+
+                          GLOSSARY and ACRONYMS 
+
+                
+                Access point (AP)   
+                    Transmitter/receiver (transceiver) device
+                    that commonly connects and transports data 
+                    between a wireless network and a wired network.
+                
+                AES
+                    Advanced Encryption Standard
+
+                Association
+                    The service used to establish access point
+                    or station mapping and enable STA invocation
+                    of the distribution system serivces.
+                    (Wireless clients attempt to connect to 
+                    access points.)
+                
+                Bridge    
+                    Device that connects two or more segments 
+                    and reduces traffic by analyzing the 
+                    destination address, filtering the frame,
+                    and forwarding the frame to all connected 
+                    segments.
+                
+                Bridge AP 
+                    It is an AP that functions as a transparent 
+                    bridge between 2 wired LAN segments.  
+                
+                Bridge Host     
+                    This is also known as Work Group Bridge.  This
+                    is a non-root bridge that is connected to a
+                    remote LAN segment and will only communicate 
+                    with repeaters or root bridges.  It does not 
+                    accept association from other wireless devices.
+
+                BSS
+                    IEEE 802.11 Basic Service Set (Radio Cell).  The
+                    BSS of an AP comprises of the stations directly 
+                    associated with the AP.
+
+                CCX 
+                    Cisco Compatible eXtensions
+
+                    A set of specifications which when implemented
+                    would make a client radio interoperable with a
+                    Cisco WLAN infrastructure and make best use of the
+                    innovations for enhanced security, mobility,
+                    quality of service and network management.
+
+                CCMP
+                    Code Mode/CBC Mac Protocol
+
+                Client (Client Station)    
+                    A wireless device in a wireless network 
+                    associated with an access point.
+
+                Direct Sequence Spread Sprectrum ( DSSS )
+
+                    DSSS is a method to send data where the 
+                    transmitting and receiving systems operate at
+                    frequencies as wide as 22MHz.  The wide channels
+                    help the participating systems to send more
+                    information at higher data rates than the FSSS
+                    systems.
+
+                EAP
+                    Extensible Authentication Protocol
+
+                EAP-TLS
+                    Extensible Authentication Protocol-Transport
+                    Layer Security
+
+                Frequency Hopping Spread Spectrum ( FSSS )
+
+                    FSSS systems hop from one frequency to another in
+                    the allowed band of frequencies during the data
+                    transmission.  83 MHz is specified as the allowed
+                    band of frequencies in the 2.4 GHz spectrum.
+
+                IEEE 802.11    
+                    Standard to encourage interoperability among 
+                    wireless networking equipment.
+               
+                IEEE 802.11b
+
+                    The IEEE 802.11b standard describes DSSS systems
+                    that operate in the 2.4 GHz ISM band at data
+                    rates of 1, 2, 5,5 and 11 Mbps.
+
+                IEEE 802.11a
+
+                    The IEEE 802.11a standard describes wireless LAN
+                    operation in the 5 GHz UNII band at data rates
+                    of 6, 9, 12, 18, 24, 36, 48 and 54 Mbps.
+
+                IEEE 802.11g
+
+                    This standard specifies operation in 2.4 GHz ISM
+                    band at data rates of 6, 9, 12, 18. 24, 36, 48 and
+                    54 Mbps.
+
+                Industrial, Scientific and Medical band (ISM)
+
+                    A license-free band specified by the Federal
+                    Communications Commission for use by the wireless
+                    LAN systems.  The ISM bands are located starting
+                    at 902 MHz, 2.4GHz and 5.8 GHz.
+ 
+                MIC
+                    Message Integrity Check.  A MIC can, optionally, 
+                    be added to WEP-encrypted 802.11 frames.
+                
+                Non-Root Bridge   
+                    This wireless bridge does not connect to the main
+                    wired LAN segment.  It connects to a remote wired 
+                    LAN segment and can associate to root bridges and
+                    other non-root bridges that accept client 
+                    associations.  It also can accept associations 
+                    from other non-root bridges, repeater access 
+                    points, and client devices.
+
+                PCI
+                    Peripheral Component Interconnect
+
+                    A local bus standard developed by Intel
+                    Corporation. Most modern PCs include a PCI bus.
+                    PCI is a 64-bit bus, though it is usually
+                    implemented as a 32-bit bus. It can run at clock
+                    speeds of 33 or 66 MHz. At 32 bits and 33 MHz, it
+                    yields a throughput rate of 133 MBps.
+                
+                Repeater    
+                    Device that connects multiple segments, listening 
+                    to each and repeating signal on one to every other 
+                    connected one; regenerates each transmission 
+                    so that it can travel farther.
+                
+                Repeater or Non-root Access Point    
+                    The repeater access point is not connected 
+                    to the wired LAN.  The Repeater is a wireless 
+                    LAN transceiver that transfers data between 
+                    a client and another access point, another 
+                    repeater, or between two bridges.  The repeater 
+                    is placed within radio range of an access point 
+                    connected to the wired LAN, another repeater, or 
+                    an non-root bridge to extend the range of the 
+                    infrastructure.
+                
+                Root Access Point    
+                    This access point connects clients to the main 
+                    wired LAN.
+                
+                Root Wireless Bridge    
+                    This wireless bridge is connected to the main 
+                    wired LAN.  This wireless bridge can communicate
+                    with non-root wireless bridges, repeater access
+                    points, and client devices but not with another 
+                    wireless root bridge.  Only one wireless bridge
+                    in a wireless LAN can be set as the wireless 
+                    root bridge.  
+
+                SSID
+                    Radio Service Set ID.  It is used for identification
+                    during association.
+                
+                STA (WSTA)
+                    A non-AP 802.11 wireless station.
+
+                TKIP      
+                    WPA Temporal Key encryption.
+
+                Unlicensed National Information Infrastucture (UNII)
+
+                    The UNII bands are in the 5 GHz range and are 100
+                    MHz wide.  These bands are used by 802.11a-compliant
+                    devices. 
+
+                WEP
+                    Wired Equivalent Privacy.  'WEP' is generally used
+                    to refer to 802.11 encryption.
+                
+                WPA
+                    WiFi Protected Access
+
+                Work Group Bridges (WGB)
+                    See bridge host."
+        REVISION      "200701050000Z"
+        DESCRIPTION
+                "The changes made are as follows.
+
+                 - Added more explanations on the kind of entries 
+                   populated for cDot11ClientConfigInfoTable, on
+                   infrastructure clients like repeaters, non-root
+                   bridges and workgroup bridges. 
+
+                 - Added cDot11ClientNewKeyManagement object
+                   to the cDot11ClientConfigInfoTable. " 
+
+        REVISION      "200606120000Z"
+        DESCRIPTION
+                "The changes made are as follows.
+
+                 - Added the following enumerations to
+                   CDot11ClientRadioType.
+
+                   - 'cb21ag'
+                   - 'ccxClient'
+                   - 'unknown'
+                 
+                 -  Added 'unknown' to CDot11ClientDevType.
+
+                 -  Added cDot11ClientDevObjectID to
+                    cDot11ClientConfigInfoTable. "
+ 
+        REVISION      "200503080000Z"
+        DESCRIPTION
+                "Updated CDot11ClientDevType to include a new device
+                type. Updated CDot11ClientRadioType to include new
+                radio types." 
+        REVISION      "200411280000Z"
+        DESCRIPTION
+                "Correct spelling of CDot11AuthenicationMethod to 
+                CDot11AuthenticationMethod."
+        REVISION      "200410180000Z"
+        DESCRIPTION
+                "Added new client VLAN, sub-interface ifIndex, key
+                management type, authentication type, and cipher
+                type information." 
+        REVISION      "200402190000Z"
+        DESCRIPTION
+                "Added new cd11IfCipherStatsTable for radio interface
+                AES, TKIP, and security tempering attempts statistics."
+        REVISION      "200307270000Z"
+        DESCRIPTION
+                "Added new IEEE 802.11g radio type to 
+                CDot11ClientRadioType and new AP device type to 
+                CDot11ClientDevType."
+        REVISION      "200304110000Z"
+        DESCRIPTION
+                "Added new objects for client software version, IP 
+                address, name, and association or authentication state."
+        REVISION      "200301290000Z"
+        DESCRIPTION
+                "Added new 5GHz radio type to CDot11ClientRadioType
+                and new client types to CDot11ClientDevType."
+        REVISION      "200207150000Z"
+        DESCRIPTION
+                "Corrected the unit of cDot11ClientBytesReceived."
+        REVISION      "200204170000Z"
+        DESCRIPTION
+                "Added a new index cd11IfAuxSsid and a new object 
+                cDot11ClientParentAddress to the 
+                cDot11ClientConfigInfoTable."
+        REVISION      "200203060000Z"
+        DESCRIPTION
+                "Initial version of this MIB module."
+        ::= { ciscoMgmt 273 }
+
+
+ciscoDot11AssocMIBObjects OBJECT IDENTIFIER 
+        ::= { ciscoDot11AssociationMIB 1 }
+
+cDot11AssociationGlobal OBJECT IDENTIFIER 
+        ::= { ciscoDot11AssocMIBObjects 1 }
+
+cDot11ClientConfiguration OBJECT IDENTIFIER
+        ::= { ciscoDot11AssocMIBObjects 2 }
+
+cDot11ClientStatistics OBJECT IDENTIFIER
+        ::= { ciscoDot11AssocMIBObjects 3 }
+
+
+-- Textual Conventions
+
+CDot11ClientRoleClassType ::= TEXTUAL-CONVENTION
+        STATUS     current
+        DESCRIPTION
+                "This defines the type of role of a wireless device.  
+                The device types are:
+                    clientStation(0)  - client station,
+                    repeater(1)       - repeater access point,
+                    accessPoint(2)    - access point,
+                    bridgeHost(3)     - bridge host (WGB),
+                    bridge(4)         - bridge,
+                    bridgeRoot(5)     - root bridge
+                    ethernetClient(6) - Ethernet client through WGB."
+        SYNTAX     INTEGER {
+                clientStation(0), 
+                repeater(1),
+                accessPoint(2),
+                bridgeHost(3), 
+                bridge(4),
+                bridgeRoot(5),
+                ethernetClient(6) } 
+
+CDot11ClientDevType ::= TEXTUAL-CONVENTION
+        STATUS     current
+        DESCRIPTION
+                "This defines the classifications of wireless client
+                device.  The devices are classified by their Ethernet
+                connection, serial connection, and the type of radio 
+                it uses.  The device classifications are: 
+                    unknown(1)              - unknown,
+                    ethernetAP(76)          - Ethernet access point,
+                    ethernetBridge(77)      - Ethernet bridge,
+                    pc3000Client(84)        - client with a 3000 radio,
+                    serialUC(85)            - serial port universal 
+                                              client,
+                    ethernetUC(86)          - Ethernet universal 
+                                              client,
+                    pc3500Client(101)       - client with a 5300 radio,
+                    pc4500Client(102)       - client with a 4500 radio,
+                    generic80211Client(104) - client of an unknown 
+                                              radio type and non-Cisco
+                                              device, 
+                    pc4800Client(109)       - client with a 4800 radio,
+                    pc3100Client(110)       - client with a 3100 radio,
+                    mc(111)                 - multiple client Ethernet,
+                                              universal client,
+                    ethernetClient(112)     - Ethernet client of a WGB,
+                    pc4800bClient(117)      - client with a 4800b radio,
+                    wgbNoDiversity(123)     - WGB with one antenna,
+                    wgb(124)                - WGB with two antennas,
+                    series350Client(127)    - client with 350 series 
+                                              radio,
+                    series370Client(128)    - client with 370 series 
+                                              dot11A radio,
+                    c1100SeriesAP(129)      - Cisco 1100 series AP, 
+                    c1410SeriesBridge(130)  - Cisco 1410 series bridge, 
+                    c1200SeriesAP(132)      - Cisco 1200 series AP,
+                    mp2xClient(133)         - client with MP2x IEEE
+                                              802.11g radio,
+                    c350SeriesAP(134)       - Cisco IOS 350 series AP, 
+                    cb21agClient(135)       - Cisco CB21AG/PI21AG 
+                                              IEEE 802.lla/b/g client,
+                    radioKodiak(136)        - Cisco IEEE 802.11a 
+                                              AIR-RM21A-x-K9 and 
+                                              AIR-RM22A-x-K9 radio, 
+                    c1130SeriesAP(137)      - Cisco 1130 series AP,
+                    c1310SeriesBridge(138)  - Cisco 1310 series bridge,
+                    c7920phone(139)         - Cisco 7920 series phone,
+                    c1240SeriesAP(140)      - Cisco 1240 series AP. "
+
+
+        SYNTAX     INTEGER {
+                unknown(1), 
+                ethernetAP(76),
+                ethernetBridge(77),
+                pc3000Client(84),
+                serialUC(85),
+                ethernetUC(86),
+                pc3500Client(101),
+                pc4500Client(102),
+                generic80211Client(104),
+                pc4800Client(109),
+                pc3100Client(110),
+                mc(111),
+                ethernetClient(112),
+                pc4800bClient(117),
+                wgbNoDiversity(123),
+                wgb(124),
+                series350Client(127), 
+                series370Client(128),   
+                c1100SeriesAP(129),  
+                c1410SeriesBridge(130),
+                c1200SeriesAP(132),   
+                mp2xClient(133),         
+                c350SeriesAP(134),
+                cb21agClient(135),       
+                radioKodiak(136),
+                c1130SeriesAP(137),
+                c1310SeriesBridge(138),
+                c7920phone(139),
+                c1240SeriesAP(140)
+                           } 
+
+CDot11ClientRadioType ::= TEXTUAL-CONVENTION
+        STATUS     current
+        DESCRIPTION
+                "This defines the radio classifications of wireless
+                stations.  It indicates the model number of the radio
+                in the remote unit.  The radio classifications are: 
+                    unknown(1)     - unknown,
+                    ccxClient(2)   - CCX-compatible radio,
+                    pc3500(3)      - Cisco 3500 radio,
+                    pc3000(4)      - Cisco 3000 radio,
+                    pc4500(6)      - Cisco 4500 radio,
+                    pc4800(12)     - Cisco 4800 radio,
+                    pc3100(13)     - Cisco 3100 radio,
+                    series340(33)  - Cisco 340 series radio,
+                    series350(34)  - Cisco 350 series radio,
+                    series370(35)  - Cisco 370 series dot11A radio,
+                    bridge1410(36) - Cisco 1410 bridge 5GHz radio,
+                    mp2xSeries(37) - Cisco 11g MP2x series radio,
+                    rm2xSeries(38) - Cisco 11a RM2x series radio,
+                    rm2gSeries(39) - Cisco 11g RM2x series radio,
+                    mp2xMAR(40)    - Cisco 3210 MAR 11g MP2x radio,
+                    cb21ag(46)     - Cisco CB21AG/PI21AG 
+                                     IEEE 802.11a/b/g radio. "
+        SYNTAX     INTEGER { 
+                unknown(1),
+                ccxClient(2),
+                pc3500(3),
+                pc3000(4),
+                pc4500(6),
+                pc4800(12),
+                pc3100(13),
+                series340(33), 
+                series350(34), 
+                series370(35),
+                bridge1410(36), 
+                mp2xSeries(37),
+                rm2xSeries(38), 
+                rm2gSeries(39), 
+                mp2xMAR(40),
+                cb21ag(46)
+                           }
+
+CDot11AuthenticationMethod ::= TEXTUAL-CONVENTION
+        STATUS     current
+        DESCRIPTION
+                "These are the IEEE 802.11 supported 
+                authentication methods for wireless devices:
+                    open(1)         - Open System
+                    sharedKey(2)    - Shared Key
+                    networkEap(129) - Network EAP."
+        REFERENCE
+                "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium
+                Access Control and Physical Layer Specifications,
+                LAN MAN Standards Committee of the IEEE Computer
+                Society, IEEE802dot11-MIB, 
+                dot11AuthenticationAlgorithm."
+        SYNTAX     INTEGER {
+                    open(1),
+                    sharedKey(2),
+                    networkEap(129)
+                           }
+
+ 
+CDot11AdditionalAuthenMethod ::= TEXTUAL-CONVENTION
+        STATUS     current
+        DESCRIPTION
+                "These are the additional authentications that can 
+                be performed after IEEE 802.11 Open System or Shared
+                Key authentication is completed successfully:
+                    mac(0) - MAC address authentication   
+                    eap(1) - EAP authentication."  
+        SYNTAX     BITS {
+                    mac(0),
+                    eap(1)
+                        }
+
+CDot11Dot1xAuthenMethod ::= TEXTUAL-CONVENTION 
+        STATUS     current                    
+        DESCRIPTION                          
+                "These are the IEEE 802.1x authentication methods
+                performed between the IEEE 802.11 wireless clients
+                and the authentication server.  Depending on the
+                server and client configuration, more than one
+                authentication methods can be performed for any
+                IEEE 802.11 association.  The IEEE 802.1x 
+                authentication methods are:
+                    md5(0)     - Message-digest algorithm
+                    leap(1)    - Cisco Light-weight EAP 
+                    peap(2)    - Protected EAP
+                    eapTls(3)  - EAP Transport Layer Security 
+                    eapSim(4)  - EAP Enhanced GSM Authentication
+                    eapFast(5) - Cisco EAP Fast."
+        SYNTAX     BITS {
+                    md5(0),
+                    leap(1),
+                    peap(2),
+                    eapTls(3),
+                    eapSim(4), 
+                    eapFast(5) 
+                        }  
+
+CDot11KeyManagementMethod ::= TEXTUAL-CONVENTION 
+        STATUS     deprecated                          
+        DESCRIPTION                                
+                "These are the encryption key management methods
+                for IEEE 802.11 wireless frame encryption. The key 
+                management methods are:
+                    wpa(0)   - Wi-Fi Protected Access
+                    cckm(1)  - Cisco proprietary key management." 
+        SYNTAX     BITS {
+                    wpa(0),
+                    cckm(1) 
+                        }  
+
+CDot11NewKeyManagementMethod ::= TEXTUAL-CONVENTION
+        STATUS     current
+        DESCRIPTION
+                "These are the encryption key management methods
+                for IEEE 802.11 wireless frame encryption. The key
+                management methods are:
+                    cckm(0)  - Cisco proprietary key management
+                    wpa1(1)  - Wi-Fi Protected Access version 1
+                    wpa2(2)  - Wi-Fi Protected Access version 2."
+        SYNTAX     BITS {
+                    cckm(0),
+                    wpa1(1),
+                    wpa2(2)
+                        }
+
+--********************************************************************
+--*  dot11 association global parameters  
+--********************************************************************
+cDot11ParentAddress OBJECT-TYPE
+        SYNTAX     MacAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the MAC address of the parent access point
+                or root bridge for this device.  The value is zero
+                if this is a root access point or bridge."
+        ::= { cDot11AssociationGlobal 1 }
+
+cDot11ActiveDevicesTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF CDot11ActiveDevicesEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION 
+                "This table contains the list of active devices 
+                currently associated with this device on each of 
+                the IEEE 802.11 interfaces.  This table has a 
+                sparse dependent relationship on the ifTable."
+        ::= { cDot11AssociationGlobal 2 }
+
+cDot11ActiveDevicesEntry OBJECT-TYPE
+        SYNTAX     CDot11ActiveDevicesEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "An entry represents a currently active device
+                associated with this device.  These active devices 
+                include: wireless clients, repeaters, and bridges."
+        INDEX      { ifIndex }
+        ::= { cDot11ActiveDevicesTable 1 }
+
+CDot11ActiveDevicesEntry ::=
+        SEQUENCE   { 
+                cDot11ActiveWirelessClients  Gauge32,
+                cDot11ActiveBridges          Gauge32,
+                cDot11ActiveRepeaters        Gauge32 
+                   }
+
+cDot11ActiveWirelessClients OBJECT-TYPE
+        SYNTAX     Gauge32 (0..2007)
+        UNITS      "Device" 
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION 
+                "This is the number of wireless clients 
+                currently associating with this device on this
+                interface."
+        ::= { cDot11ActiveDevicesEntry 1 }
+
+cDot11ActiveBridges OBJECT-TYPE
+        SYNTAX     Gauge32 (0..2007)
+        UNITS      "Device" 
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION 
+                "This is the number of bridges currently 
+                associating with this device on this interface."
+        ::= { cDot11ActiveDevicesEntry 2 }
+
+cDot11ActiveRepeaters OBJECT-TYPE
+        SYNTAX     Gauge32 (0..2007)
+        UNITS      "Device" 
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the number of repeaters currently 
+                associating with this device on this interface."
+        ::= { cDot11ActiveDevicesEntry 3 }
+
+cDot11AssociationStatsTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF CDot11AssociationStatsEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION 
+                "This table contains statistics for various 
+                devices associated with this device on each 
+                of the IEEE 802.11 interfaces since it was 
+                last re-started.  These devices include: wireless 
+                clients, repeaters, and bridges.  This table has
+                a sparse dependent relationship on the ifTable."
+        ::= { cDot11AssociationGlobal 3 }
+
+cDot11AssociationStatsEntry OBJECT-TYPE
+        SYNTAX     CDot11AssociationStatsEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Each entry provides association statistics of 
+                various devices interacting with this device on 
+                each of the IEEE 802.11 interfaces."
+        INDEX      { ifIndex }
+        ::= { cDot11AssociationStatsTable 1 }
+
+CDot11AssociationStatsEntry ::=
+        SEQUENCE   { 
+                cDot11AssStatsAssociated       Counter32,
+                cDot11AssStatsAuthenticated    Counter32,
+                cDot11AssStatsRoamedIn         Counter32,
+                cDot11AssStatsRoamedAway       Counter32,
+                cDot11AssStatsDeauthenticated  Counter32,
+                cDot11AssStatsDisassociated    Counter32 
+                   }
+
+cDot11AssStatsAssociated OBJECT-TYPE
+        SYNTAX     Counter32 
+        UNITS      "client"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION 
+                "This object counts the number of stations 
+                associated with this device on this interface 
+                since device re-started."
+        ::= { cDot11AssociationStatsEntry 1 }
+
+cDot11AssStatsAuthenticated OBJECT-TYPE
+        SYNTAX     Counter32 
+        UNITS      "client"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION 
+                "This object counts the number of stations 
+                authenticated with this device on this interface
+                since device re-started."
+        ::= { cDot11AssociationStatsEntry 2 }
+
+cDot11AssStatsRoamedIn OBJECT-TYPE
+        SYNTAX     Counter32 
+        UNITS      "client"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION 
+                "This object counts the number of stations 
+                roamed from another device to this device on 
+                this interface since device re-started."
+        ::= { cDot11AssociationStatsEntry 3 }
+
+cDot11AssStatsRoamedAway OBJECT-TYPE
+        SYNTAX     Counter32 
+        UNITS      "client"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION 
+                "This object counts the number of stations 
+                roamed away from this device on this interface 
+                since device re-started."
+        ::= { cDot11AssociationStatsEntry 4 }
+
+cDot11AssStatsDeauthenticated OBJECT-TYPE
+        SYNTAX     Counter32 
+        UNITS      "client"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION 
+                "This object counts the number of stations 
+                deauthenticated with this device on this 
+                interface since device re-started."
+        ::= { cDot11AssociationStatsEntry 5 }
+
+cDot11AssStatsDisassociated OBJECT-TYPE
+        SYNTAX     Counter32 
+        UNITS      "client"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION 
+                "This object counts the number of stations 
+                disassociated with this device on this 
+                interface since device re-started."
+        ::= { cDot11AssociationStatsEntry 6 }
+
+
+cd11IfCipherStatsTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF Cd11IfCipherStatsEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "This table includes AES, TKIP, and security tempering
+                attempts statistics collected by the IEEE 802.11 radio
+                interfaces and system management.  This table has a
+                sparse dependent relationship on the ifTable.  For
+                each entry in this table, there exists an entry in the
+                ifTable of ifType ieee80211(71)."
+        ::= { cDot11AssociationGlobal 4 }
+
+cd11IfCipherStatsEntry OBJECT-TYPE
+        SYNTAX     Cd11IfCipherStatsEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Each entry provides cipher related statistics  
+                collected on each of the IEEE 802.11 interfaces."
+        INDEX      { ifIndex }
+        ::= { cd11IfCipherStatsTable 1 }
+
+Cd11IfCipherStatsEntry ::=
+        SEQUENCE   {
+            cd11IfCipherMicFailClientAddress   MacAddress,
+            cd11IfCipherTkipLocalMicFailures   Counter32,
+            cd11IfCipherTkipRemotMicFailures  Counter32,
+            cd11IfCipherTkipCounterMeasInvok  Counter32,
+            cd11IfCipherCcmpReplaysDiscarded   Counter32,
+            cd11IfCipherTkipReplaysDetected    Counter32
+                    }
+
+cd11IfCipherMicFailClientAddress OBJECT-TYPE
+        SYNTAX     MacAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is MAC address of the client attached to 
+                this radio interface that caused the most recent
+                MIC failure."
+        ::= { cd11IfCipherStatsEntry 1 }
+
+cd11IfCipherTkipLocalMicFailures OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object counts the number of MIC failures 
+                encountered on this radio interface since device 
+                re-started."  
+        ::= { cd11IfCipherStatsEntry 2 }
+
+cd11IfCipherTkipRemotMicFailures OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object counts the number of MIC failures 
+                reported by clients on this radio interface
+                since device re-started."
+        ::= { cd11IfCipherStatsEntry 3 }
+
+cd11IfCipherTkipCounterMeasInvok OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object counts the number of TKIP Counter 
+                Measures invoked on this interface since 
+                device re-started."
+        ::= { cd11IfCipherStatsEntry 4 }
+
+cd11IfCipherCcmpReplaysDiscarded OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object counts the number of received 
+                unicast fragments discarded by replay mechanism 
+                on this interface since device re-started."
+        ::= { cd11IfCipherStatsEntry 5 }
+
+cd11IfCipherTkipReplaysDetected OBJECT-TYPE
+        SYNTAX     Counter32
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object counts the number of TKIP replay 
+                errors detected on this interface since device 
+                re-started."
+        ::= { cd11IfCipherStatsEntry 6 }
+
+
+--********************************************************************
+--*  dot11 client configuration 
+--********************************************************************
+        
+cDot11ClientConfigInfoTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF CDot11ClientConfigInfoEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "This table contains configuration information of 
+                client devices.  Entries on this table are created
+                by the device radio driver when clients establish
+                association with the device.  Entries are removed
+                when clients disassociate with the device.  These 
+                clients include: wireless clients, repeaters, 
+                and bridges.  On Infrastructure clients like
+                repeaters, non-root bridges and workgroup bridges,
+                this table also has an entry for the parent device
+                they are associated to."
+        ::= { cDot11ClientConfiguration 1 }
+
+cDot11ClientConfigInfoEntry OBJECT-TYPE
+        SYNTAX     CDot11ClientConfigInfoEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Each entry is the device specification of a client
+                of this device on the IEEE 802.11 radio interfaces.
+                Clients are grouped according to the SSIDs of the
+                interfaces they use for associations and the MAC
+                address of their parent devices if the clients are 
+                repeat APs."
+        INDEX      { 
+                ifIndex, 
+                cd11IfAuxSsid, 
+                cDot11ClientAddress 
+                   }
+        ::= { cDot11ClientConfigInfoTable 1 }
+
+CDot11ClientConfigInfoEntry ::=
+        SEQUENCE   {
+                cDot11ClientAddress           MacAddress,
+                cDot11ClientParentAddress     MacAddress,
+                cDot11ClientRoleClassType     CDot11ClientRoleClassType,
+                cDot11ClientDevType           CDot11ClientDevType,
+                cDot11ClientRadioType         CDot11ClientRadioType,
+                cDot11ClientWepEnabled        TruthValue,
+                cDot11ClientWepKeyMixEnabled  TruthValue,
+                cDot11ClientMicEnabled        TruthValue,
+                cDot11ClientPowerSaveMode     INTEGER,
+                cDot11ClientAid               Unsigned32,
+                cDot11ClientDataRateSet       OCTET STRING,
+                cDot11ClientSoftwareVersion   SnmpAdminString,
+                cDot11ClientName              SnmpAdminString, 
+                cDot11ClientAssociationState  INTEGER, 
+                cDot11ClientIpAddressType     InetAddressType, 
+                cDot11ClientIpAddress         InetAddress, 
+                cDot11ClientVlanId            CDot11IfVlanIdOrZero, 
+                cDot11ClientSubIfIndex        InterfaceIndex, 
+                cDot11ClientAuthenAlgorithm   
+                        CDot11AuthenticationMethod, 
+                cDot11ClientAdditionalAuthen  
+                        CDot11AdditionalAuthenMethod,
+                cDot11ClientDot1xAuthenAlgorithm  
+                        CDot11Dot1xAuthenMethod,
+                cDot11ClientKeyManagement         
+                        CDot11KeyManagementMethod,
+                cDot11ClientUnicastCipher
+                        CDot11IfCipherType,
+                cDot11ClientMulticastCipher
+                        CDot11IfCipherType,
+                cDot11ClientDevObjectID OBJECT IDENTIFIER,
+                cDot11ClientNewKeyManagement
+                        CDot11NewKeyManagementMethod 
+                   }
+
+cDot11ClientAddress OBJECT-TYPE
+        SYNTAX     MacAddress
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "The MAC address of the client."
+        ::= { cDot11ClientConfigInfoEntry 1 }
+
+cDot11ClientParentAddress OBJECT-TYPE
+        SYNTAX     MacAddress
+        MAX-ACCESS read-only 
+        STATUS     current
+        DESCRIPTION
+                "The MAC address of the parent of the client if the
+                client is a repeater AP.  If this client has no parent,
+                the value is '00000000'h."
+        ::= { cDot11ClientConfigInfoEntry 2 }
+
+cDot11ClientRoleClassType OBJECT-TYPE
+        SYNTAX     CDot11ClientRoleClassType
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The role classification of the client."
+        ::= { cDot11ClientConfigInfoEntry 3 }
+
+cDot11ClientDevType OBJECT-TYPE
+        SYNTAX     CDot11ClientDevType
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The device type of the client."
+        ::= { cDot11ClientConfigInfoEntry 4 }
+
+cDot11ClientRadioType OBJECT-TYPE
+        SYNTAX     CDot11ClientRadioType
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The radio classification of the client."
+        ::= { cDot11ClientConfigInfoEntry 5 }
+
+cDot11ClientWepEnabled OBJECT-TYPE
+        SYNTAX     TruthValue
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "When this object is 'true', it indicates that the 
+                WEP key mechanism is used for transmitting frames 
+                of data for this client.  The default value of this
+                object is 'false'."
+        DEFVAL     { false }
+        ::= { cDot11ClientConfigInfoEntry 6 }
+
+cDot11ClientWepKeyMixEnabled OBJECT-TYPE
+        SYNTAX     TruthValue
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "When this object is 'true', it indicates that this
+                client is using WEP key mixing."
+        DEFVAL     { false }
+        ::= { cDot11ClientConfigInfoEntry 7 }
+
+cDot11ClientMicEnabled OBJECT-TYPE
+        SYNTAX     TruthValue
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "When this object is 'true', it indicates that the 
+                MIC is enabled for this client.  The default value of
+                this object is 'false'."
+        DEFVAL     { false }
+        ::= { cDot11ClientConfigInfoEntry 8 }
+
+cDot11ClientPowerSaveMode OBJECT-TYPE
+        SYNTAX     INTEGER { 
+                active(1), 
+                powersave(2) }
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The power management mode of this client.  The
+                two possible modes are:
+                    active(1)    - this client is not in power-save 
+                                   mode and it is actively sending or 
+                                   receiving data.
+                    powersave(2) - this client is in power-save mode and
+                                   it wakes up once a while to check for
+                                   pending data."
+        DEFVAL     { active }
+        ::= { cDot11ClientConfigInfoEntry 9 }
+
+cDot11ClientAid OBJECT-TYPE
+        SYNTAX     Unsigned32 (0..2008)
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the association identification number of
+                clients or multicast addresses associating with this 
+                device.  For a multicast address with clients, the
+                cDot11ClientAid is '0'.  For the uplink association
+                from this device to its parent access point, the 
+                cDot11ClientAid is always '1'.  For any multicast 
+                address with no client currently known to be 
+                associated with this device, the cDot11ClientAid is 
+                '2008'."
+        ::= { cDot11ClientConfigInfoEntry 10 }
+
+cDot11ClientDataRateSet OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE(1..126))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the set of data rates at which this client 
+                can transmit and receive data.  Each client can 
+                support up to 126 rates.  Each octet contains an 
+                integer value representing one of these 126 rates.  
+                Each rate shall be within the range from 2 to 127, 
+                corresponding to data rates in increments of 500 kb/s
+                from 1 Mb/s to 63.5 Mb/s, This value is reported in 
+                transmitted Beacon, Probe Request, Probe Response, 
+                Association Request, Association Response,  
+                Reassociation Request, and Reassociation Response 
+                frames, and is used to determine whether a BSS with 
+                which the client desires to synchronize is suitable.  
+                It is also used when starting a BSS."
+        ::= { cDot11ClientConfigInfoEntry 11 }
+
+cDot11ClientSoftwareVersion OBJECT-TYPE
+        SYNTAX     SnmpAdminString
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the Cisco IOS software version if the other 
+                end of the association is a bridge, access point, or 
+                repeater. If it is a wireless client, this is the 
+                firmware version of the client card."
+        ::= { cDot11ClientConfigInfoEntry 12 }
+
+cDot11ClientName OBJECT-TYPE
+        SYNTAX     SnmpAdminString
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the Cisco IOS device hostname if the other
+                end of the association is a bridge, access point, or 
+                repeater. If it is a wireless client, this is the 
+                configured client name."
+        ::= { cDot11ClientConfigInfoEntry 13 }
+
+cDot11ClientAssociationState OBJECT-TYPE
+        SYNTAX     INTEGER {
+                       initial(1),
+                       authenNotAssociated(2),
+                       assocAndAuthenticated(3),
+                       assocNotAnuthenticated(4) 
+                           } 
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object indicates the state of the authentication
+                and association process between the two parties:
+                    initial(1)             - association request 
+                                             received from client,
+                    authenNotAssociated(2) - 802.11 authenticated but 
+                                             not 802.11 associated,
+                    assocAndAuthenticated(3)  - 802.11 associated and 
+                                                802.1x authenticated,
+                    assocNotAnuthenticated(4) - 802.11 associated but 
+                                                802.1x not 
+                                                authenticated."
+        ::= { cDot11ClientConfigInfoEntry 14 }
+
+cDot11ClientIpAddressType OBJECT-TYPE
+        SYNTAX     InetAddressType 
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the IP address type of the
+                cDot11ClientIpAddress." 
+        ::= { cDot11ClientConfigInfoEntry 15 }
+
+cDot11ClientIpAddress OBJECT-TYPE
+        SYNTAX     InetAddress
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the static or DHCP assigned IP address of the
+                client."
+        ::= { cDot11ClientConfigInfoEntry 16 }
+
+cDot11ClientVlanId OBJECT-TYPE
+        SYNTAX     CDot11IfVlanIdOrZero
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the VLAN which this wireless client is 
+                assigned to when it is successfully associated to the
+                wireless station.  The value is 0 if this wireless 
+                client is not assigned to any VLAN or this wireless
+                station is not configured with any VLAN."
+        ::= { cDot11ClientConfigInfoEntry 17 }
+
+cDot11ClientSubIfIndex OBJECT-TYPE
+        SYNTAX     InterfaceIndex
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the ifIndex of the sub-interface which this
+                wireless client is assigned to when it is successfully
+                associated to the wireless station.  The value of this
+                object is 0, if this wireless station is not configured
+                with VLAN and this wireless client is assigned to the
+                radio hardware interface of this wireless station."
+        ::= { cDot11ClientConfigInfoEntry 18 }
+
+cDot11ClientAuthenAlgorithm OBJECT-TYPE
+        SYNTAX     CDot11AuthenticationMethod
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the IEEE 802.11 authentication methods 
+                performed between the wireless station and this client 
+                during association."
+        ::= { cDot11ClientConfigInfoEntry 19 }
+
+cDot11ClientAdditionalAuthen OBJECT-TYPE
+        SYNTAX     CDot11AdditionalAuthenMethod
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "These are the additional authentications that were
+                performed after IEEE 802.11 Open System or Shared
+                Key authentication had completed.  If none of the bits
+                is set, no additional MAC address or EAP authentication 
+                was performed during association."
+        ::= { cDot11ClientConfigInfoEntry 20 }
+
+cDot11ClientDot1xAuthenAlgorithm OBJECT-TYPE
+        SYNTAX     CDot11Dot1xAuthenMethod
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This the IEEE 802.1x authentication methods performed
+                between this wireless client and the authentication 
+                server.  If none of the bits is set, no IEEE 802.1x 
+                authentication was performed during association."
+        ::= { cDot11ClientConfigInfoEntry 21 }
+
+cDot11ClientKeyManagement OBJECT-TYPE
+        SYNTAX     CDot11KeyManagementMethod
+        MAX-ACCESS read-only
+        STATUS     deprecated
+        DESCRIPTION
+                "This is the encryption key management methods
+                employed by this client for IEEE 802.11 wireless frame
+                encryption.  If none of the bits is set, no key
+                management method is employed."
+        ::= { cDot11ClientConfigInfoEntry 22 }
+
+cDot11ClientUnicastCipher OBJECT-TYPE
+        SYNTAX     CDot11IfCipherType
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "These are all the possible unicast data frame cipher 
+                encryption type combinations currently supported on 
+                this IEEE 802.11 client.  If none of the bits is set,
+                the client is not performing any unicast data frame 
+                encryption.
+                    aesccm      WPA AES CCMP encryption,
+                    ckip        Cisco Per packet key hashing,
+                    cmic        Cisco MMH MIC,
+                    ckip|cmic   Cisco Per packet key hashing and 
+                                Cisco MMH MIC,
+                    tkip        WPA Temporal Key encryption,
+                    wep128      128-bit WEP key,
+                    wep40       40-bit WEP key.
+                    tkip|wep128 WPA Temporal Key and 128-bit WEP,
+                    tkip|wep40  WPA Temporal Key and 40-bit WEP."
+        ::= { cDot11ClientConfigInfoEntry 23 }
+
+cDot11ClientMulticastCipher OBJECT-TYPE
+        SYNTAX     CDot11IfCipherType
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "These are all the possible multi-cast data frame 
+                cipher encryption type combinations currently supported
+                on this IEEE 802.11 client.  If none of the bits is set,
+                the client is not performing any multi-cast data frame 
+                encryption.
+                    aesccm      WPA AES CCMP encryption,
+                    ckip        Cisco Per packet key hashing,
+                    cmic        Cisco MMH MIC,
+                    ckip|cmic   Cisco Per packet key hashing and 
+                                Cisco MMH MIC,
+                    tkip        WPA Temporal Key encryption,
+                    wep128      128-bit WEP key,
+                    wep40       40-bit WEP key.
+                    tkip|wep128 WPA Temporal Key and 128-bit WEP,
+                    tkip|wep40  WPA Temporal Key and 40-bit WEP."
+        ::= { cDot11ClientConfigInfoEntry 24 }
+
+cDot11ClientDevObjectID OBJECT-TYPE
+        SYNTAX     OBJECT IDENTIFIER
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This object indicates the authoritative
+                identification of the associated 802.11 client as
+                assigned by the respective vendor.  A value of '0.0'
+                shall be populated if no such identification exists
+                for this 802.11 client. "
+        REFERENCE
+               "sysObjectID from SNMPv2-MIB" 
+        ::= { cDot11ClientConfigInfoEntry 25 }
+
+cDot11ClientNewKeyManagement OBJECT-TYPE
+        SYNTAX     CDot11NewKeyManagementMethod
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the encryption key management methods
+                employed by this client for IEEE 802.11 wireless frame
+                encryption.  If none of the bits is set, no key
+                management method is employed."
+        ::= { cDot11ClientConfigInfoEntry 26 }
+
+--********************************************************************
+--*  dot11 client statistics 
+--********************************************************************
+
+cDot11ClientStatisticTable OBJECT-TYPE
+        SYNTAX     SEQUENCE OF CDot11ClientStatisticEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "This table contains statistics and status of all 
+                clients on the cDot11ClientConfigInfoTable.  This table 
+                has a one-to-one relationship with the 
+                cDot11ClientConfigInfoTable." 
+        ::= { cDot11ClientStatistics 1 }
+
+cDot11ClientStatisticEntry OBJECT-TYPE
+        SYNTAX     CDot11ClientStatisticEntry
+        MAX-ACCESS not-accessible
+        STATUS     current
+        DESCRIPTION
+                "Each entry contains statistics about errors, 
+                data transmitting and receiving rates and counts
+                information of a client."
+        AUGMENTS { cDot11ClientConfigInfoEntry } 
+        ::= { cDot11ClientStatisticTable 1 }
+
+CDot11ClientStatisticEntry ::=
+        SEQUENCE {
+                cDot11ClientCurrentTxRateSet  OCTET STRING,
+                cDot11ClientUpTime            Unsigned32,
+                cDot11ClientSignalStrength    Integer32,
+                cDot11ClientSigQuality        Unsigned32,
+                cDot11ClientAgingLeft         Gauge32,
+                cDot11ClientPacketsReceived   Counter32,
+                cDot11ClientBytesReceived     Counter32,
+                cDot11ClientPacketsSent       Counter32,
+                cDot11ClientBytesSent         Counter32,
+                cDot11ClientDuplicates        Counter32,
+                cDot11ClientMsduRetries       Counter32,
+                cDot11ClientMsduFails         Counter32,
+                cDot11ClientWepErrors         Counter32,
+                cDot11ClientMicErrors         Counter32,
+                cDot11ClientMicMissingFrames  Counter32 }
+  
+cDot11ClientCurrentTxRateSet OBJECT-TYPE
+        SYNTAX     OCTET STRING (SIZE(1..126))
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the set current transmit data rates for 
+                this client.  Each client can transmit data at all 
+                of its configured rates.  There is a maximum of 126
+                it can configure to transmit.  Each octet contains 
+                an integer value representing one of these 126 
+                rates it is currently transmitting.  Each rate shall
+                be within the range from 2 to 127, corresponding 
+                to data rates in increments of 500 kb/s from 
+                1 Mb/s to 63.5 Mb/s.  This value is reported in 
+                transmitted Beacon, Probe Request, Probe Response, 
+                Association Request, Association Response, 
+                Reassociation Request, and Reassociation Response 
+                frames."
+        ::= { cDot11ClientStatisticEntry 1 }
+
+cDot11ClientUpTime OBJECT-TYPE
+        SYNTAX     Unsigned32
+        UNITS      "second"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The time in seconds that this client has been 
+                associated with this device."
+        ::= { cDot11ClientStatisticEntry 2 }
+
+cDot11ClientSignalStrength OBJECT-TYPE
+        SYNTAX     Integer32 (-100..0) 
+        UNITS      "dBm"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is a device-dependent measure of the signal 
+                strength of the most recently received packet from 
+                this client.  It may be normalized or unnormalized."
+        ::= { cDot11ClientStatisticEntry 3 }
+
+cDot11ClientSigQuality OBJECT-TYPE
+        SYNTAX     Unsigned32 (0..100)
+        UNITS      "percentage"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is a device-dependent measure of the signal 
+                quality of the most recently received packet from 
+                this client."
+        ::= { cDot11ClientStatisticEntry 4 }
+
+cDot11ClientAgingLeft OBJECT-TYPE
+        SYNTAX     Gauge32
+        UNITS      "second"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The number of seconds of aging time left for 
+                this client."
+        ::= { cDot11ClientStatisticEntry 5 }
+
+cDot11ClientPacketsReceived OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "packet"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The number of packets received from this client."
+        ::= { cDot11ClientStatisticEntry 6 }
+
+cDot11ClientBytesReceived OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "byte"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The number of bytes received from this client."
+        ::= { cDot11ClientStatisticEntry 7 }
+
+cDot11ClientPacketsSent OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "packet"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The number of packets sent to this client."
+        ::= { cDot11ClientStatisticEntry 8 }
+
+cDot11ClientBytesSent OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "byte"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "The number of bytes sent to this client."
+        ::= { cDot11ClientStatisticEntry 9 }
+
+cDot11ClientDuplicates  OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "packet"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter increments when a packet for this
+                client is received and the Sequence Control field
+                in the packet header indicates the packet is a 
+                duplicate."
+        ::= { cDot11ClientStatisticEntry 10 }
+  
+cDot11ClientMsduRetries OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "packet"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter increments when an MSDU is successfully
+                transmitted after one or more retransmissions for this
+                client."
+        ::= { cDot11ClientStatisticEntry 11 }
+
+cDot11ClientMsduFails OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "packet"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This counter increments when an MSDU is not 
+                transmitted successfully for this client due to the 
+                number of transmit attempts exceeding some limit."
+        ::= { cDot11ClientStatisticEntry 12 }
+
+cDot11ClientWepErrors OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "packet"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the number of packets received from this 
+                client which failed to be properly decrypted via 
+                the WEP security mechanism."
+        ::= { cDot11ClientStatisticEntry 13 }
+
+cDot11ClientMicErrors OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "error"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the number of MIC errors for this client."
+        ::= { cDot11ClientStatisticEntry 14 }
+
+cDot11ClientMicMissingFrames OBJECT-TYPE
+        SYNTAX     Counter32
+        UNITS      "packet"
+        MAX-ACCESS read-only
+        STATUS     current
+        DESCRIPTION
+                "This is the number of missing MIC packets for 
+                this client."
+        ::= { cDot11ClientStatisticEntry 15 }
+
+                                         
+-- *****************************************************************
+--   Conformance information
+-- *****************************************************************
+
+ciscoDot11AssocMIBConformance OBJECT IDENTIFIER 
+        ::= { ciscoDot11AssociationMIB 2 }
+ciscoDot11AssocMIBCompliances OBJECT IDENTIFIER 
+        ::= { ciscoDot11AssocMIBConformance 1 }
+ciscoDot11AssocMIBGroups OBJECT IDENTIFIER 
+        ::= { ciscoDot11AssocMIBConformance 2 }
+
+
+--********************************************************************
+--*    Compliance statements  
+--********************************************************************
+
+ciscoDot11AssocMIBCompliance MODULE-COMPLIANCE
+        STATUS     deprecated 
+        DESCRIPTION
+                "The compliance statement for the ciscoDot11Assoc
+                group."
+        MODULE MANDATORY-GROUPS {
+                ciscoDot11AssocGlobalGroup,
+                ciscoDot11ClientConfigGroup, 
+                ciscoDot11ClientStatGroup
+                                }
+        ::= { ciscoDot11AssocMIBCompliances 1 }
+
+ciscoDot11AssocMIBComplianceRev1 MODULE-COMPLIANCE
+        STATUS     deprecated 
+        DESCRIPTION
+                "The compliance statement for the ciscoDot11Assoc
+                group.  This is deprecated in favor of the 
+                ciscoDot11AssocMIBComplianceRev2."
+        MODULE MANDATORY-GROUPS {
+                ciscoDot11AssocGlobalGroup,
+                ciscoDot11ClientConfigGroup,
+                ciscoDot11ClientStatGroup,
+                ciscoDot11ClientInfoGroup 
+                                }
+        ::= { ciscoDot11AssocMIBCompliances 2 }
+
+ciscoDot11AssocMIBComplianceRev2 MODULE-COMPLIANCE
+        STATUS     deprecated 
+        DESCRIPTION
+                "The compliance statement for the ciscoDot11Assoc
+                group."
+        MODULE 
+                MANDATORY-GROUPS {
+                    ciscoDot11ClientConfigGroup,
+                    ciscoDot11ClientStatGroup,
+                    ciscoDot11ClientInfoGroup,
+                    ciscoDot11IfAssocStatGroup,
+                    ciscoDot11IfCipherStatGroup
+                                 }
+                GROUP ciscoDot11ApAssocGlobalGroup 
+                DESCRIPTION
+                        "This group is required only if the platform
+                        is a IEEE 802.11 AP/repeater or bridge."
+
+        ::= { ciscoDot11AssocMIBCompliances 3 }
+
+ciscoDot11AssocMIBComplianceRev3 MODULE-COMPLIANCE
+        STATUS     deprecated -- by ciscoDot11AssocMIBComplianceRev4 
+        DESCRIPTION
+                "The compliance statement for this 
+                ciscoDot11AssociationMIB module." 
+        MODULE
+                MANDATORY-GROUPS {
+                    ciscoDot11ClientConfigGroup,
+                    ciscoDot11ClientAuthenGroup, 
+                    ciscoDot11ClientStatGroup,
+                    ciscoDot11ClientInfoGroup,
+                    ciscoDot11IfAssocStatGroup,
+                    ciscoDot11IfCipherStatGroup
+                                 }
+                GROUP ciscoDot11ApAssocGlobalGroup
+                DESCRIPTION
+                        "This group is required only if the platform
+                        is a IEEE 802.11 AP/repeater or bridge."
+
+        ::= { ciscoDot11AssocMIBCompliances 4 }
+
+ciscoDot11AssocMIBComplianceRev4 MODULE-COMPLIANCE
+        STATUS     current
+        DESCRIPTION
+                "The compliance statement for this
+                ciscoDot11AssociationMIB module."
+        MODULE
+                MANDATORY-GROUPS {
+                    ciscoDot11ClientConfigGroup,
+                    ciscoDot11ClientAuthenGroup,
+                    ciscoDot11ClientStatGroup,
+                    ciscoDot11ClientInfoGroup,
+                    ciscoDot11IfAssocStatGroup,
+                    ciscoDot11IfCipherStatGroup,
+                    ciscoDot11ClientConfigExtGroup
+                                 }
+                GROUP ciscoDot11ApAssocGlobalGroup
+                DESCRIPTION
+                        "This group is required only if the platform
+                        is a IEEE 802.11 AP/repeater or bridge."
+
+        ::= { ciscoDot11AssocMIBCompliances 5 }
+
+ciscoDot11AssocMIBComplianceRev5 MODULE-COMPLIANCE
+        STATUS     current
+        DESCRIPTION
+                "The compliance statement for this
+                ciscoDot11AssociationMIB module."
+        MODULE
+                MANDATORY-GROUPS {
+                    ciscoDot11ClientConfigGroup,
+                    ciscoDot11ClientAuthenGroup,
+                    ciscoDot11ClientStatGroup,
+                    ciscoDot11ClientInfoGroup,
+                    ciscoDot11IfAssocStatGroup,
+                    ciscoDot11IfCipherStatGroup,
+                    ciscoDot11ClientConfigExtGroup,
+                    ciscoDot11ClientNewAuthenGroup
+                                 }
+                GROUP ciscoDot11ApAssocGlobalGroup
+                DESCRIPTION
+                        "This group is required only if the platform
+                        is a IEEE 802.11 AP/repeater or bridge."
+
+        ::= { ciscoDot11AssocMIBCompliances 6 }
+
+
+
+--********************************************************************
+--*    Units of conformance  
+--********************************************************************
+
+ciscoDot11AssocGlobalGroup OBJECT-GROUP
+        OBJECTS { 
+                cDot11ParentAddress,
+                cDot11ActiveWirelessClients,
+                cDot11ActiveBridges,
+                cDot11ActiveRepeaters, 
+                cDot11AssStatsAssociated,
+                cDot11AssStatsAuthenticated,
+                cDot11AssStatsRoamedIn,
+                cDot11AssStatsRoamedAway,
+                cDot11AssStatsDeauthenticated,
+                cDot11AssStatsDisassociated 
+                }
+        STATUS     deprecated 
+        DESCRIPTION
+                "This is the device association information group.
+                This is deprecated in favor of the
+                ciscoDot11IfAssocStatGroup."
+        ::= { ciscoDot11AssocMIBGroups 1 }
+
+ciscoDot11ClientConfigGroup OBJECT-GROUP
+        OBJECTS {
+                cDot11ClientParentAddress,
+                cDot11ClientRoleClassType,
+                cDot11ClientDevType,
+                cDot11ClientRadioType,
+                cDot11ClientWepEnabled,
+                cDot11ClientWepKeyMixEnabled,
+                cDot11ClientMicEnabled,
+                cDot11ClientPowerSaveMode,
+                cDot11ClientAid,
+                cDot11ClientDataRateSet 
+                }
+        STATUS     current
+        DESCRIPTION
+                "This is the client configuration information group." 
+        ::= { ciscoDot11AssocMIBGroups 2 }
+
+ciscoDot11ClientStatGroup OBJECT-GROUP
+        OBJECTS {
+                cDot11ClientCurrentTxRateSet,
+                cDot11ClientUpTime,
+                cDot11ClientSignalStrength,
+                cDot11ClientSigQuality,
+                cDot11ClientPacketsReceived,
+                cDot11ClientBytesReceived,
+                cDot11ClientPacketsSent,
+                cDot11ClientBytesSent,
+                cDot11ClientAgingLeft,
+                cDot11ClientDuplicates,
+                cDot11ClientMsduRetries,
+                cDot11ClientMsduFails,
+                cDot11ClientWepErrors,
+                cDot11ClientMicErrors,
+                cDot11ClientMicMissingFrames 
+                }
+        STATUS     current
+        DESCRIPTION
+                "This is the client statistics group." 
+        ::= { ciscoDot11AssocMIBGroups 3 }
+
+ciscoDot11ClientInfoGroup OBJECT-GROUP
+        OBJECTS {
+                cDot11ClientSoftwareVersion,
+                cDot11ClientName,
+                cDot11ClientAssociationState,
+                cDot11ClientIpAddressType,
+                cDot11ClientIpAddress 
+                }
+        STATUS     current
+        DESCRIPTION
+                "This group provides additional client specific
+                information."
+        ::= { ciscoDot11AssocMIBGroups 4 }
+
+ciscoDot11ApAssocGlobalGroup OBJECT-GROUP
+        OBJECTS {
+                cDot11ParentAddress
+                }
+        STATUS     current
+        DESCRIPTION
+                "This group includes per AP or bridge global 
+                configuration information."
+        ::= { ciscoDot11AssocMIBGroups 5 }
+
+ciscoDot11IfAssocStatGroup OBJECT-GROUP
+        OBJECTS {
+                cDot11ActiveWirelessClients,
+                cDot11ActiveBridges,
+                cDot11ActiveRepeaters,
+                cDot11AssStatsAssociated,
+                cDot11AssStatsAuthenticated,
+                cDot11AssStatsRoamedIn,
+                cDot11AssStatsRoamedAway,
+                cDot11AssStatsDeauthenticated,
+                cDot11AssStatsDisassociated
+                }
+        STATUS     current
+        DESCRIPTION
+                "This group includes per IEEE 802.11 radio
+                interface association statistics."
+        ::= { ciscoDot11AssocMIBGroups 6 }
+
+ciscoDot11IfCipherStatGroup OBJECT-GROUP
+        OBJECTS {
+                cd11IfCipherMicFailClientAddress,
+                cd11IfCipherTkipLocalMicFailures,
+                cd11IfCipherTkipRemotMicFailures,
+                cd11IfCipherTkipCounterMeasInvok,
+                cd11IfCipherCcmpReplaysDiscarded,
+                cd11IfCipherTkipReplaysDetected
+                }
+        STATUS     current
+        DESCRIPTION
+                "This group includes per IEEE 802.11 radio
+                interface cipher related statistics collected."
+        ::= { ciscoDot11AssocMIBGroups 7 }
+
+ciscoDot11ClientAuthenGroup OBJECT-GROUP
+        OBJECTS {
+                cDot11ClientVlanId,
+                cDot11ClientSubIfIndex,
+                cDot11ClientAuthenAlgorithm,
+                cDot11ClientAdditionalAuthen,
+                cDot11ClientDot1xAuthenAlgorithm,
+                cDot11ClientKeyManagement,
+                cDot11ClientUnicastCipher,
+                cDot11ClientMulticastCipher
+                }
+        STATUS     deprecated 
+        DESCRIPTION
+                "This group includes per IEEE 802.11 radio
+                interface cipher related statistics collected."
+        ::= { ciscoDot11AssocMIBGroups 8 }
+
+ciscoDot11ClientConfigExtGroup OBJECT-GROUP
+        OBJECTS {
+                cDot11ClientDevObjectID
+        }
+        STATUS current
+        DESCRIPTION
+                "This group provides more configuration
+                information about a particular associated 802.11
+                client. " 
+        ::= { ciscoDot11AssocMIBGroups 9 }
+
+ciscoDot11ClientNewAuthenGroup OBJECT-GROUP
+        OBJECTS {
+                cDot11ClientNewKeyManagement
+                }
+        STATUS     current
+        DESCRIPTION
+                "This group includes per IEEE 802.11 radio
+                interface cipher related statistics collected."
+        ::= { ciscoDot11AssocMIBGroups 10 }
+
+--********************************************************************
+--*   End of units of conformance  
+--********************************************************************
+
+END
+