summaryrefslogtreecommitdiff
path: root/MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB
diff options
context:
space:
mode:
Diffstat (limited to 'MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB')
-rw-r--r--MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB1759
1 files changed, 1759 insertions, 0 deletions
diff --git a/MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB b/MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB
new file mode 100644
index 0000000..b7449e1
--- /dev/null
+++ b/MIBS/cisco/CISCO-DOT11-ASSOCIATION-MIB
@@ -0,0 +1,1759 @@
+-- *******************************************************************
+-- CISCO-DOT11-ASSOCIATION-MIB.my:
+-- CISCO DOT11 ASSOCIATION MIB file
+--
+-- April 2002, Francis Pang
+--
+-- Copyright (c) 2002-2007 by Cisco Systems, Inc.
+-- All rights reserved.
+-- *******************************************************************
+--
+CISCO-DOT11-ASSOCIATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY,
+ OBJECT-TYPE,
+ Gauge32,
+ Counter32,
+ Integer32,
+ Unsigned32
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE,
+ OBJECT-GROUP
+ FROM SNMPv2-CONF
+ TEXTUAL-CONVENTION,
+ MacAddress,
+ TruthValue
+ FROM SNMPv2-TC
+ ifIndex,
+ InterfaceIndex
+ FROM IF-MIB
+ InetAddressType,
+ InetAddress
+ FROM INET-ADDRESS-MIB
+ SnmpAdminString
+ FROM SNMP-FRAMEWORK-MIB
+ cd11IfAuxSsid,
+ CDot11IfVlanIdOrZero,
+ CDot11IfCipherType
+ FROM CISCO-DOT11-IF-MIB
+ ciscoMgmt
+ FROM CISCO-SMI;
+
+
+--********************************************************************
+--* MODULE IDENTITY
+--********************************************************************
+
+ciscoDot11AssociationMIB MODULE-IDENTITY
+ LAST-UPDATED "200701050000Z"
+ ORGANIZATION "Cisco Systems Inc."
+ CONTACT-INFO
+ " Cisco Systems
+ Customer Service
+
+ Postal: 170 West Tasman Drive,
+ San Jose CA 95134-1706.
+ USA
+
+ Tel: +1 800 553-NETS
+
+ E-mail: cs-dot11@cisco.com"
+ DESCRIPTION
+ "This MIB module provides network management
+ information on IEEE 802.11 wireless device
+ association management and data packet forwarding
+ configuration and statistics. This MIB is an
+ extension to the IEEE802dot11-MIB and provides
+ per client based information.
+
+ The IEEE802dot11-MIB is defined in the IEEE Std
+ 802.11-Jan 14 1999, Wireless LAN Medium Access
+ Control and Physical Layer Specifications, by the
+ LAN MAN Standards Committee of the IEEE Computer
+ Society.
+
+
+ GLOSSARY and ACRONYMS
+
+
+ Access point (AP)
+ Transmitter/receiver (transceiver) device
+ that commonly connects and transports data
+ between a wireless network and a wired network.
+
+ AES
+ Advanced Encryption Standard
+
+ Association
+ The service used to establish access point
+ or station mapping and enable STA invocation
+ of the distribution system serivces.
+ (Wireless clients attempt to connect to
+ access points.)
+
+ Bridge
+ Device that connects two or more segments
+ and reduces traffic by analyzing the
+ destination address, filtering the frame,
+ and forwarding the frame to all connected
+ segments.
+
+ Bridge AP
+ It is an AP that functions as a transparent
+ bridge between 2 wired LAN segments.
+
+ Bridge Host
+ This is also known as Work Group Bridge. This
+ is a non-root bridge that is connected to a
+ remote LAN segment and will only communicate
+ with repeaters or root bridges. It does not
+ accept association from other wireless devices.
+
+ BSS
+ IEEE 802.11 Basic Service Set (Radio Cell). The
+ BSS of an AP comprises of the stations directly
+ associated with the AP.
+
+ CCX
+ Cisco Compatible eXtensions
+
+ A set of specifications which when implemented
+ would make a client radio interoperable with a
+ Cisco WLAN infrastructure and make best use of the
+ innovations for enhanced security, mobility,
+ quality of service and network management.
+
+ CCMP
+ Code Mode/CBC Mac Protocol
+
+ Client (Client Station)
+ A wireless device in a wireless network
+ associated with an access point.
+
+ Direct Sequence Spread Sprectrum ( DSSS )
+
+ DSSS is a method to send data where the
+ transmitting and receiving systems operate at
+ frequencies as wide as 22MHz. The wide channels
+ help the participating systems to send more
+ information at higher data rates than the FSSS
+ systems.
+
+ EAP
+ Extensible Authentication Protocol
+
+ EAP-TLS
+ Extensible Authentication Protocol-Transport
+ Layer Security
+
+ Frequency Hopping Spread Spectrum ( FSSS )
+
+ FSSS systems hop from one frequency to another in
+ the allowed band of frequencies during the data
+ transmission. 83 MHz is specified as the allowed
+ band of frequencies in the 2.4 GHz spectrum.
+
+ IEEE 802.11
+ Standard to encourage interoperability among
+ wireless networking equipment.
+
+ IEEE 802.11b
+
+ The IEEE 802.11b standard describes DSSS systems
+ that operate in the 2.4 GHz ISM band at data
+ rates of 1, 2, 5,5 and 11 Mbps.
+
+ IEEE 802.11a
+
+ The IEEE 802.11a standard describes wireless LAN
+ operation in the 5 GHz UNII band at data rates
+ of 6, 9, 12, 18, 24, 36, 48 and 54 Mbps.
+
+ IEEE 802.11g
+
+ This standard specifies operation in 2.4 GHz ISM
+ band at data rates of 6, 9, 12, 18. 24, 36, 48 and
+ 54 Mbps.
+
+ Industrial, Scientific and Medical band (ISM)
+
+ A license-free band specified by the Federal
+ Communications Commission for use by the wireless
+ LAN systems. The ISM bands are located starting
+ at 902 MHz, 2.4GHz and 5.8 GHz.
+
+ MIC
+ Message Integrity Check. A MIC can, optionally,
+ be added to WEP-encrypted 802.11 frames.
+
+ Non-Root Bridge
+ This wireless bridge does not connect to the main
+ wired LAN segment. It connects to a remote wired
+ LAN segment and can associate to root bridges and
+ other non-root bridges that accept client
+ associations. It also can accept associations
+ from other non-root bridges, repeater access
+ points, and client devices.
+
+ PCI
+ Peripheral Component Interconnect
+
+ A local bus standard developed by Intel
+ Corporation. Most modern PCs include a PCI bus.
+ PCI is a 64-bit bus, though it is usually
+ implemented as a 32-bit bus. It can run at clock
+ speeds of 33 or 66 MHz. At 32 bits and 33 MHz, it
+ yields a throughput rate of 133 MBps.
+
+ Repeater
+ Device that connects multiple segments, listening
+ to each and repeating signal on one to every other
+ connected one; regenerates each transmission
+ so that it can travel farther.
+
+ Repeater or Non-root Access Point
+ The repeater access point is not connected
+ to the wired LAN. The Repeater is a wireless
+ LAN transceiver that transfers data between
+ a client and another access point, another
+ repeater, or between two bridges. The repeater
+ is placed within radio range of an access point
+ connected to the wired LAN, another repeater, or
+ an non-root bridge to extend the range of the
+ infrastructure.
+
+ Root Access Point
+ This access point connects clients to the main
+ wired LAN.
+
+ Root Wireless Bridge
+ This wireless bridge is connected to the main
+ wired LAN. This wireless bridge can communicate
+ with non-root wireless bridges, repeater access
+ points, and client devices but not with another
+ wireless root bridge. Only one wireless bridge
+ in a wireless LAN can be set as the wireless
+ root bridge.
+
+ SSID
+ Radio Service Set ID. It is used for identification
+ during association.
+
+ STA (WSTA)
+ A non-AP 802.11 wireless station.
+
+ TKIP
+ WPA Temporal Key encryption.
+
+ Unlicensed National Information Infrastucture (UNII)
+
+ The UNII bands are in the 5 GHz range and are 100
+ MHz wide. These bands are used by 802.11a-compliant
+ devices.
+
+ WEP
+ Wired Equivalent Privacy. 'WEP' is generally used
+ to refer to 802.11 encryption.
+
+ WPA
+ WiFi Protected Access
+
+ Work Group Bridges (WGB)
+ See bridge host."
+ REVISION "200701050000Z"
+ DESCRIPTION
+ "The changes made are as follows.
+
+ - Added more explanations on the kind of entries
+ populated for cDot11ClientConfigInfoTable, on
+ infrastructure clients like repeaters, non-root
+ bridges and workgroup bridges.
+
+ - Added cDot11ClientNewKeyManagement object
+ to the cDot11ClientConfigInfoTable. "
+
+ REVISION "200606120000Z"
+ DESCRIPTION
+ "The changes made are as follows.
+
+ - Added the following enumerations to
+ CDot11ClientRadioType.
+
+ - 'cb21ag'
+ - 'ccxClient'
+ - 'unknown'
+
+ - Added 'unknown' to CDot11ClientDevType.
+
+ - Added cDot11ClientDevObjectID to
+ cDot11ClientConfigInfoTable. "
+
+ REVISION "200503080000Z"
+ DESCRIPTION
+ "Updated CDot11ClientDevType to include a new device
+ type. Updated CDot11ClientRadioType to include new
+ radio types."
+ REVISION "200411280000Z"
+ DESCRIPTION
+ "Correct spelling of CDot11AuthenicationMethod to
+ CDot11AuthenticationMethod."
+ REVISION "200410180000Z"
+ DESCRIPTION
+ "Added new client VLAN, sub-interface ifIndex, key
+ management type, authentication type, and cipher
+ type information."
+ REVISION "200402190000Z"
+ DESCRIPTION
+ "Added new cd11IfCipherStatsTable for radio interface
+ AES, TKIP, and security tempering attempts statistics."
+ REVISION "200307270000Z"
+ DESCRIPTION
+ "Added new IEEE 802.11g radio type to
+ CDot11ClientRadioType and new AP device type to
+ CDot11ClientDevType."
+ REVISION "200304110000Z"
+ DESCRIPTION
+ "Added new objects for client software version, IP
+ address, name, and association or authentication state."
+ REVISION "200301290000Z"
+ DESCRIPTION
+ "Added new 5GHz radio type to CDot11ClientRadioType
+ and new client types to CDot11ClientDevType."
+ REVISION "200207150000Z"
+ DESCRIPTION
+ "Corrected the unit of cDot11ClientBytesReceived."
+ REVISION "200204170000Z"
+ DESCRIPTION
+ "Added a new index cd11IfAuxSsid and a new object
+ cDot11ClientParentAddress to the
+ cDot11ClientConfigInfoTable."
+ REVISION "200203060000Z"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ ::= { ciscoMgmt 273 }
+
+
+ciscoDot11AssocMIBObjects OBJECT IDENTIFIER
+ ::= { ciscoDot11AssociationMIB 1 }
+
+cDot11AssociationGlobal OBJECT IDENTIFIER
+ ::= { ciscoDot11AssocMIBObjects 1 }
+
+cDot11ClientConfiguration OBJECT IDENTIFIER
+ ::= { ciscoDot11AssocMIBObjects 2 }
+
+cDot11ClientStatistics OBJECT IDENTIFIER
+ ::= { ciscoDot11AssocMIBObjects 3 }
+
+
+-- Textual Conventions
+
+CDot11ClientRoleClassType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This defines the type of role of a wireless device.
+ The device types are:
+ clientStation(0) - client station,
+ repeater(1) - repeater access point,
+ accessPoint(2) - access point,
+ bridgeHost(3) - bridge host (WGB),
+ bridge(4) - bridge,
+ bridgeRoot(5) - root bridge
+ ethernetClient(6) - Ethernet client through WGB."
+ SYNTAX INTEGER {
+ clientStation(0),
+ repeater(1),
+ accessPoint(2),
+ bridgeHost(3),
+ bridge(4),
+ bridgeRoot(5),
+ ethernetClient(6) }
+
+CDot11ClientDevType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This defines the classifications of wireless client
+ device. The devices are classified by their Ethernet
+ connection, serial connection, and the type of radio
+ it uses. The device classifications are:
+ unknown(1) - unknown,
+ ethernetAP(76) - Ethernet access point,
+ ethernetBridge(77) - Ethernet bridge,
+ pc3000Client(84) - client with a 3000 radio,
+ serialUC(85) - serial port universal
+ client,
+ ethernetUC(86) - Ethernet universal
+ client,
+ pc3500Client(101) - client with a 5300 radio,
+ pc4500Client(102) - client with a 4500 radio,
+ generic80211Client(104) - client of an unknown
+ radio type and non-Cisco
+ device,
+ pc4800Client(109) - client with a 4800 radio,
+ pc3100Client(110) - client with a 3100 radio,
+ mc(111) - multiple client Ethernet,
+ universal client,
+ ethernetClient(112) - Ethernet client of a WGB,
+ pc4800bClient(117) - client with a 4800b radio,
+ wgbNoDiversity(123) - WGB with one antenna,
+ wgb(124) - WGB with two antennas,
+ series350Client(127) - client with 350 series
+ radio,
+ series370Client(128) - client with 370 series
+ dot11A radio,
+ c1100SeriesAP(129) - Cisco 1100 series AP,
+ c1410SeriesBridge(130) - Cisco 1410 series bridge,
+ c1200SeriesAP(132) - Cisco 1200 series AP,
+ mp2xClient(133) - client with MP2x IEEE
+ 802.11g radio,
+ c350SeriesAP(134) - Cisco IOS 350 series AP,
+ cb21agClient(135) - Cisco CB21AG/PI21AG
+ IEEE 802.lla/b/g client,
+ radioKodiak(136) - Cisco IEEE 802.11a
+ AIR-RM21A-x-K9 and
+ AIR-RM22A-x-K9 radio,
+ c1130SeriesAP(137) - Cisco 1130 series AP,
+ c1310SeriesBridge(138) - Cisco 1310 series bridge,
+ c7920phone(139) - Cisco 7920 series phone,
+ c1240SeriesAP(140) - Cisco 1240 series AP. "
+
+
+ SYNTAX INTEGER {
+ unknown(1),
+ ethernetAP(76),
+ ethernetBridge(77),
+ pc3000Client(84),
+ serialUC(85),
+ ethernetUC(86),
+ pc3500Client(101),
+ pc4500Client(102),
+ generic80211Client(104),
+ pc4800Client(109),
+ pc3100Client(110),
+ mc(111),
+ ethernetClient(112),
+ pc4800bClient(117),
+ wgbNoDiversity(123),
+ wgb(124),
+ series350Client(127),
+ series370Client(128),
+ c1100SeriesAP(129),
+ c1410SeriesBridge(130),
+ c1200SeriesAP(132),
+ mp2xClient(133),
+ c350SeriesAP(134),
+ cb21agClient(135),
+ radioKodiak(136),
+ c1130SeriesAP(137),
+ c1310SeriesBridge(138),
+ c7920phone(139),
+ c1240SeriesAP(140)
+ }
+
+CDot11ClientRadioType ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "This defines the radio classifications of wireless
+ stations. It indicates the model number of the radio
+ in the remote unit. The radio classifications are:
+ unknown(1) - unknown,
+ ccxClient(2) - CCX-compatible radio,
+ pc3500(3) - Cisco 3500 radio,
+ pc3000(4) - Cisco 3000 radio,
+ pc4500(6) - Cisco 4500 radio,
+ pc4800(12) - Cisco 4800 radio,
+ pc3100(13) - Cisco 3100 radio,
+ series340(33) - Cisco 340 series radio,
+ series350(34) - Cisco 350 series radio,
+ series370(35) - Cisco 370 series dot11A radio,
+ bridge1410(36) - Cisco 1410 bridge 5GHz radio,
+ mp2xSeries(37) - Cisco 11g MP2x series radio,
+ rm2xSeries(38) - Cisco 11a RM2x series radio,
+ rm2gSeries(39) - Cisco 11g RM2x series radio,
+ mp2xMAR(40) - Cisco 3210 MAR 11g MP2x radio,
+ cb21ag(46) - Cisco CB21AG/PI21AG
+ IEEE 802.11a/b/g radio. "
+ SYNTAX INTEGER {
+ unknown(1),
+ ccxClient(2),
+ pc3500(3),
+ pc3000(4),
+ pc4500(6),
+ pc4800(12),
+ pc3100(13),
+ series340(33),
+ series350(34),
+ series370(35),
+ bridge1410(36),
+ mp2xSeries(37),
+ rm2xSeries(38),
+ rm2gSeries(39),
+ mp2xMAR(40),
+ cb21ag(46)
+ }
+
+CDot11AuthenticationMethod ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "These are the IEEE 802.11 supported
+ authentication methods for wireless devices:
+ open(1) - Open System
+ sharedKey(2) - Shared Key
+ networkEap(129) - Network EAP."
+ REFERENCE
+ "IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium
+ Access Control and Physical Layer Specifications,
+ LAN MAN Standards Committee of the IEEE Computer
+ Society, IEEE802dot11-MIB,
+ dot11AuthenticationAlgorithm."
+ SYNTAX INTEGER {
+ open(1),
+ sharedKey(2),
+ networkEap(129)
+ }
+
+
+CDot11AdditionalAuthenMethod ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "These are the additional authentications that can
+ be performed after IEEE 802.11 Open System or Shared
+ Key authentication is completed successfully:
+ mac(0) - MAC address authentication
+ eap(1) - EAP authentication."
+ SYNTAX BITS {
+ mac(0),
+ eap(1)
+ }
+
+CDot11Dot1xAuthenMethod ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "These are the IEEE 802.1x authentication methods
+ performed between the IEEE 802.11 wireless clients
+ and the authentication server. Depending on the
+ server and client configuration, more than one
+ authentication methods can be performed for any
+ IEEE 802.11 association. The IEEE 802.1x
+ authentication methods are:
+ md5(0) - Message-digest algorithm
+ leap(1) - Cisco Light-weight EAP
+ peap(2) - Protected EAP
+ eapTls(3) - EAP Transport Layer Security
+ eapSim(4) - EAP Enhanced GSM Authentication
+ eapFast(5) - Cisco EAP Fast."
+ SYNTAX BITS {
+ md5(0),
+ leap(1),
+ peap(2),
+ eapTls(3),
+ eapSim(4),
+ eapFast(5)
+ }
+
+CDot11KeyManagementMethod ::= TEXTUAL-CONVENTION
+ STATUS deprecated
+ DESCRIPTION
+ "These are the encryption key management methods
+ for IEEE 802.11 wireless frame encryption. The key
+ management methods are:
+ wpa(0) - Wi-Fi Protected Access
+ cckm(1) - Cisco proprietary key management."
+ SYNTAX BITS {
+ wpa(0),
+ cckm(1)
+ }
+
+CDot11NewKeyManagementMethod ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "These are the encryption key management methods
+ for IEEE 802.11 wireless frame encryption. The key
+ management methods are:
+ cckm(0) - Cisco proprietary key management
+ wpa1(1) - Wi-Fi Protected Access version 1
+ wpa2(2) - Wi-Fi Protected Access version 2."
+ SYNTAX BITS {
+ cckm(0),
+ wpa1(1),
+ wpa2(2)
+ }
+
+--********************************************************************
+--* dot11 association global parameters
+--********************************************************************
+cDot11ParentAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the MAC address of the parent access point
+ or root bridge for this device. The value is zero
+ if this is a root access point or bridge."
+ ::= { cDot11AssociationGlobal 1 }
+
+cDot11ActiveDevicesTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CDot11ActiveDevicesEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains the list of active devices
+ currently associated with this device on each of
+ the IEEE 802.11 interfaces. This table has a
+ sparse dependent relationship on the ifTable."
+ ::= { cDot11AssociationGlobal 2 }
+
+cDot11ActiveDevicesEntry OBJECT-TYPE
+ SYNTAX CDot11ActiveDevicesEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry represents a currently active device
+ associated with this device. These active devices
+ include: wireless clients, repeaters, and bridges."
+ INDEX { ifIndex }
+ ::= { cDot11ActiveDevicesTable 1 }
+
+CDot11ActiveDevicesEntry ::=
+ SEQUENCE {
+ cDot11ActiveWirelessClients Gauge32,
+ cDot11ActiveBridges Gauge32,
+ cDot11ActiveRepeaters Gauge32
+ }
+
+cDot11ActiveWirelessClients OBJECT-TYPE
+ SYNTAX Gauge32 (0..2007)
+ UNITS "Device"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of wireless clients
+ currently associating with this device on this
+ interface."
+ ::= { cDot11ActiveDevicesEntry 1 }
+
+cDot11ActiveBridges OBJECT-TYPE
+ SYNTAX Gauge32 (0..2007)
+ UNITS "Device"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of bridges currently
+ associating with this device on this interface."
+ ::= { cDot11ActiveDevicesEntry 2 }
+
+cDot11ActiveRepeaters OBJECT-TYPE
+ SYNTAX Gauge32 (0..2007)
+ UNITS "Device"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of repeaters currently
+ associating with this device on this interface."
+ ::= { cDot11ActiveDevicesEntry 3 }
+
+cDot11AssociationStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CDot11AssociationStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains statistics for various
+ devices associated with this device on each
+ of the IEEE 802.11 interfaces since it was
+ last re-started. These devices include: wireless
+ clients, repeaters, and bridges. This table has
+ a sparse dependent relationship on the ifTable."
+ ::= { cDot11AssociationGlobal 3 }
+
+cDot11AssociationStatsEntry OBJECT-TYPE
+ SYNTAX CDot11AssociationStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry provides association statistics of
+ various devices interacting with this device on
+ each of the IEEE 802.11 interfaces."
+ INDEX { ifIndex }
+ ::= { cDot11AssociationStatsTable 1 }
+
+CDot11AssociationStatsEntry ::=
+ SEQUENCE {
+ cDot11AssStatsAssociated Counter32,
+ cDot11AssStatsAuthenticated Counter32,
+ cDot11AssStatsRoamedIn Counter32,
+ cDot11AssStatsRoamedAway Counter32,
+ cDot11AssStatsDeauthenticated Counter32,
+ cDot11AssStatsDisassociated Counter32
+ }
+
+cDot11AssStatsAssociated OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "client"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of stations
+ associated with this device on this interface
+ since device re-started."
+ ::= { cDot11AssociationStatsEntry 1 }
+
+cDot11AssStatsAuthenticated OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "client"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of stations
+ authenticated with this device on this interface
+ since device re-started."
+ ::= { cDot11AssociationStatsEntry 2 }
+
+cDot11AssStatsRoamedIn OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "client"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of stations
+ roamed from another device to this device on
+ this interface since device re-started."
+ ::= { cDot11AssociationStatsEntry 3 }
+
+cDot11AssStatsRoamedAway OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "client"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of stations
+ roamed away from this device on this interface
+ since device re-started."
+ ::= { cDot11AssociationStatsEntry 4 }
+
+cDot11AssStatsDeauthenticated OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "client"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of stations
+ deauthenticated with this device on this
+ interface since device re-started."
+ ::= { cDot11AssociationStatsEntry 5 }
+
+cDot11AssStatsDisassociated OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "client"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of stations
+ disassociated with this device on this
+ interface since device re-started."
+ ::= { cDot11AssociationStatsEntry 6 }
+
+
+cd11IfCipherStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Cd11IfCipherStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table includes AES, TKIP, and security tempering
+ attempts statistics collected by the IEEE 802.11 radio
+ interfaces and system management. This table has a
+ sparse dependent relationship on the ifTable. For
+ each entry in this table, there exists an entry in the
+ ifTable of ifType ieee80211(71)."
+ ::= { cDot11AssociationGlobal 4 }
+
+cd11IfCipherStatsEntry OBJECT-TYPE
+ SYNTAX Cd11IfCipherStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry provides cipher related statistics
+ collected on each of the IEEE 802.11 interfaces."
+ INDEX { ifIndex }
+ ::= { cd11IfCipherStatsTable 1 }
+
+Cd11IfCipherStatsEntry ::=
+ SEQUENCE {
+ cd11IfCipherMicFailClientAddress MacAddress,
+ cd11IfCipherTkipLocalMicFailures Counter32,
+ cd11IfCipherTkipRemotMicFailures Counter32,
+ cd11IfCipherTkipCounterMeasInvok Counter32,
+ cd11IfCipherCcmpReplaysDiscarded Counter32,
+ cd11IfCipherTkipReplaysDetected Counter32
+ }
+
+cd11IfCipherMicFailClientAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is MAC address of the client attached to
+ this radio interface that caused the most recent
+ MIC failure."
+ ::= { cd11IfCipherStatsEntry 1 }
+
+cd11IfCipherTkipLocalMicFailures OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of MIC failures
+ encountered on this radio interface since device
+ re-started."
+ ::= { cd11IfCipherStatsEntry 2 }
+
+cd11IfCipherTkipRemotMicFailures OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of MIC failures
+ reported by clients on this radio interface
+ since device re-started."
+ ::= { cd11IfCipherStatsEntry 3 }
+
+cd11IfCipherTkipCounterMeasInvok OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of TKIP Counter
+ Measures invoked on this interface since
+ device re-started."
+ ::= { cd11IfCipherStatsEntry 4 }
+
+cd11IfCipherCcmpReplaysDiscarded OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of received
+ unicast fragments discarded by replay mechanism
+ on this interface since device re-started."
+ ::= { cd11IfCipherStatsEntry 5 }
+
+cd11IfCipherTkipReplaysDetected OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object counts the number of TKIP replay
+ errors detected on this interface since device
+ re-started."
+ ::= { cd11IfCipherStatsEntry 6 }
+
+
+--********************************************************************
+--* dot11 client configuration
+--********************************************************************
+
+cDot11ClientConfigInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CDot11ClientConfigInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains configuration information of
+ client devices. Entries on this table are created
+ by the device radio driver when clients establish
+ association with the device. Entries are removed
+ when clients disassociate with the device. These
+ clients include: wireless clients, repeaters,
+ and bridges. On Infrastructure clients like
+ repeaters, non-root bridges and workgroup bridges,
+ this table also has an entry for the parent device
+ they are associated to."
+ ::= { cDot11ClientConfiguration 1 }
+
+cDot11ClientConfigInfoEntry OBJECT-TYPE
+ SYNTAX CDot11ClientConfigInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry is the device specification of a client
+ of this device on the IEEE 802.11 radio interfaces.
+ Clients are grouped according to the SSIDs of the
+ interfaces they use for associations and the MAC
+ address of their parent devices if the clients are
+ repeat APs."
+ INDEX {
+ ifIndex,
+ cd11IfAuxSsid,
+ cDot11ClientAddress
+ }
+ ::= { cDot11ClientConfigInfoTable 1 }
+
+CDot11ClientConfigInfoEntry ::=
+ SEQUENCE {
+ cDot11ClientAddress MacAddress,
+ cDot11ClientParentAddress MacAddress,
+ cDot11ClientRoleClassType CDot11ClientRoleClassType,
+ cDot11ClientDevType CDot11ClientDevType,
+ cDot11ClientRadioType CDot11ClientRadioType,
+ cDot11ClientWepEnabled TruthValue,
+ cDot11ClientWepKeyMixEnabled TruthValue,
+ cDot11ClientMicEnabled TruthValue,
+ cDot11ClientPowerSaveMode INTEGER,
+ cDot11ClientAid Unsigned32,
+ cDot11ClientDataRateSet OCTET STRING,
+ cDot11ClientSoftwareVersion SnmpAdminString,
+ cDot11ClientName SnmpAdminString,
+ cDot11ClientAssociationState INTEGER,
+ cDot11ClientIpAddressType InetAddressType,
+ cDot11ClientIpAddress InetAddress,
+ cDot11ClientVlanId CDot11IfVlanIdOrZero,
+ cDot11ClientSubIfIndex InterfaceIndex,
+ cDot11ClientAuthenAlgorithm
+ CDot11AuthenticationMethod,
+ cDot11ClientAdditionalAuthen
+ CDot11AdditionalAuthenMethod,
+ cDot11ClientDot1xAuthenAlgorithm
+ CDot11Dot1xAuthenMethod,
+ cDot11ClientKeyManagement
+ CDot11KeyManagementMethod,
+ cDot11ClientUnicastCipher
+ CDot11IfCipherType,
+ cDot11ClientMulticastCipher
+ CDot11IfCipherType,
+ cDot11ClientDevObjectID OBJECT IDENTIFIER,
+ cDot11ClientNewKeyManagement
+ CDot11NewKeyManagementMethod
+ }
+
+cDot11ClientAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The MAC address of the client."
+ ::= { cDot11ClientConfigInfoEntry 1 }
+
+cDot11ClientParentAddress OBJECT-TYPE
+ SYNTAX MacAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The MAC address of the parent of the client if the
+ client is a repeater AP. If this client has no parent,
+ the value is '00000000'h."
+ ::= { cDot11ClientConfigInfoEntry 2 }
+
+cDot11ClientRoleClassType OBJECT-TYPE
+ SYNTAX CDot11ClientRoleClassType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The role classification of the client."
+ ::= { cDot11ClientConfigInfoEntry 3 }
+
+cDot11ClientDevType OBJECT-TYPE
+ SYNTAX CDot11ClientDevType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The device type of the client."
+ ::= { cDot11ClientConfigInfoEntry 4 }
+
+cDot11ClientRadioType OBJECT-TYPE
+ SYNTAX CDot11ClientRadioType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The radio classification of the client."
+ ::= { cDot11ClientConfigInfoEntry 5 }
+
+cDot11ClientWepEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When this object is 'true', it indicates that the
+ WEP key mechanism is used for transmitting frames
+ of data for this client. The default value of this
+ object is 'false'."
+ DEFVAL { false }
+ ::= { cDot11ClientConfigInfoEntry 6 }
+
+cDot11ClientWepKeyMixEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When this object is 'true', it indicates that this
+ client is using WEP key mixing."
+ DEFVAL { false }
+ ::= { cDot11ClientConfigInfoEntry 7 }
+
+cDot11ClientMicEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "When this object is 'true', it indicates that the
+ MIC is enabled for this client. The default value of
+ this object is 'false'."
+ DEFVAL { false }
+ ::= { cDot11ClientConfigInfoEntry 8 }
+
+cDot11ClientPowerSaveMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ active(1),
+ powersave(2) }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The power management mode of this client. The
+ two possible modes are:
+ active(1) - this client is not in power-save
+ mode and it is actively sending or
+ receiving data.
+ powersave(2) - this client is in power-save mode and
+ it wakes up once a while to check for
+ pending data."
+ DEFVAL { active }
+ ::= { cDot11ClientConfigInfoEntry 9 }
+
+cDot11ClientAid OBJECT-TYPE
+ SYNTAX Unsigned32 (0..2008)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the association identification number of
+ clients or multicast addresses associating with this
+ device. For a multicast address with clients, the
+ cDot11ClientAid is '0'. For the uplink association
+ from this device to its parent access point, the
+ cDot11ClientAid is always '1'. For any multicast
+ address with no client currently known to be
+ associated with this device, the cDot11ClientAid is
+ '2008'."
+ ::= { cDot11ClientConfigInfoEntry 10 }
+
+cDot11ClientDataRateSet OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1..126))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the set of data rates at which this client
+ can transmit and receive data. Each client can
+ support up to 126 rates. Each octet contains an
+ integer value representing one of these 126 rates.
+ Each rate shall be within the range from 2 to 127,
+ corresponding to data rates in increments of 500 kb/s
+ from 1 Mb/s to 63.5 Mb/s, This value is reported in
+ transmitted Beacon, Probe Request, Probe Response,
+ Association Request, Association Response,
+ Reassociation Request, and Reassociation Response
+ frames, and is used to determine whether a BSS with
+ which the client desires to synchronize is suitable.
+ It is also used when starting a BSS."
+ ::= { cDot11ClientConfigInfoEntry 11 }
+
+cDot11ClientSoftwareVersion OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the Cisco IOS software version if the other
+ end of the association is a bridge, access point, or
+ repeater. If it is a wireless client, this is the
+ firmware version of the client card."
+ ::= { cDot11ClientConfigInfoEntry 12 }
+
+cDot11ClientName OBJECT-TYPE
+ SYNTAX SnmpAdminString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the Cisco IOS device hostname if the other
+ end of the association is a bridge, access point, or
+ repeater. If it is a wireless client, this is the
+ configured client name."
+ ::= { cDot11ClientConfigInfoEntry 13 }
+
+cDot11ClientAssociationState OBJECT-TYPE
+ SYNTAX INTEGER {
+ initial(1),
+ authenNotAssociated(2),
+ assocAndAuthenticated(3),
+ assocNotAnuthenticated(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the state of the authentication
+ and association process between the two parties:
+ initial(1) - association request
+ received from client,
+ authenNotAssociated(2) - 802.11 authenticated but
+ not 802.11 associated,
+ assocAndAuthenticated(3) - 802.11 associated and
+ 802.1x authenticated,
+ assocNotAnuthenticated(4) - 802.11 associated but
+ 802.1x not
+ authenticated."
+ ::= { cDot11ClientConfigInfoEntry 14 }
+
+cDot11ClientIpAddressType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the IP address type of the
+ cDot11ClientIpAddress."
+ ::= { cDot11ClientConfigInfoEntry 15 }
+
+cDot11ClientIpAddress OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the static or DHCP assigned IP address of the
+ client."
+ ::= { cDot11ClientConfigInfoEntry 16 }
+
+cDot11ClientVlanId OBJECT-TYPE
+ SYNTAX CDot11IfVlanIdOrZero
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the VLAN which this wireless client is
+ assigned to when it is successfully associated to the
+ wireless station. The value is 0 if this wireless
+ client is not assigned to any VLAN or this wireless
+ station is not configured with any VLAN."
+ ::= { cDot11ClientConfigInfoEntry 17 }
+
+cDot11ClientSubIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the ifIndex of the sub-interface which this
+ wireless client is assigned to when it is successfully
+ associated to the wireless station. The value of this
+ object is 0, if this wireless station is not configured
+ with VLAN and this wireless client is assigned to the
+ radio hardware interface of this wireless station."
+ ::= { cDot11ClientConfigInfoEntry 18 }
+
+cDot11ClientAuthenAlgorithm OBJECT-TYPE
+ SYNTAX CDot11AuthenticationMethod
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the IEEE 802.11 authentication methods
+ performed between the wireless station and this client
+ during association."
+ ::= { cDot11ClientConfigInfoEntry 19 }
+
+cDot11ClientAdditionalAuthen OBJECT-TYPE
+ SYNTAX CDot11AdditionalAuthenMethod
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "These are the additional authentications that were
+ performed after IEEE 802.11 Open System or Shared
+ Key authentication had completed. If none of the bits
+ is set, no additional MAC address or EAP authentication
+ was performed during association."
+ ::= { cDot11ClientConfigInfoEntry 20 }
+
+cDot11ClientDot1xAuthenAlgorithm OBJECT-TYPE
+ SYNTAX CDot11Dot1xAuthenMethod
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This the IEEE 802.1x authentication methods performed
+ between this wireless client and the authentication
+ server. If none of the bits is set, no IEEE 802.1x
+ authentication was performed during association."
+ ::= { cDot11ClientConfigInfoEntry 21 }
+
+cDot11ClientKeyManagement OBJECT-TYPE
+ SYNTAX CDot11KeyManagementMethod
+ MAX-ACCESS read-only
+ STATUS deprecated
+ DESCRIPTION
+ "This is the encryption key management methods
+ employed by this client for IEEE 802.11 wireless frame
+ encryption. If none of the bits is set, no key
+ management method is employed."
+ ::= { cDot11ClientConfigInfoEntry 22 }
+
+cDot11ClientUnicastCipher OBJECT-TYPE
+ SYNTAX CDot11IfCipherType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "These are all the possible unicast data frame cipher
+ encryption type combinations currently supported on
+ this IEEE 802.11 client. If none of the bits is set,
+ the client is not performing any unicast data frame
+ encryption.
+ aesccm WPA AES CCMP encryption,
+ ckip Cisco Per packet key hashing,
+ cmic Cisco MMH MIC,
+ ckip|cmic Cisco Per packet key hashing and
+ Cisco MMH MIC,
+ tkip WPA Temporal Key encryption,
+ wep128 128-bit WEP key,
+ wep40 40-bit WEP key.
+ tkip|wep128 WPA Temporal Key and 128-bit WEP,
+ tkip|wep40 WPA Temporal Key and 40-bit WEP."
+ ::= { cDot11ClientConfigInfoEntry 23 }
+
+cDot11ClientMulticastCipher OBJECT-TYPE
+ SYNTAX CDot11IfCipherType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "These are all the possible multi-cast data frame
+ cipher encryption type combinations currently supported
+ on this IEEE 802.11 client. If none of the bits is set,
+ the client is not performing any multi-cast data frame
+ encryption.
+ aesccm WPA AES CCMP encryption,
+ ckip Cisco Per packet key hashing,
+ cmic Cisco MMH MIC,
+ ckip|cmic Cisco Per packet key hashing and
+ Cisco MMH MIC,
+ tkip WPA Temporal Key encryption,
+ wep128 128-bit WEP key,
+ wep40 40-bit WEP key.
+ tkip|wep128 WPA Temporal Key and 128-bit WEP,
+ tkip|wep40 WPA Temporal Key and 40-bit WEP."
+ ::= { cDot11ClientConfigInfoEntry 24 }
+
+cDot11ClientDevObjectID OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the authoritative
+ identification of the associated 802.11 client as
+ assigned by the respective vendor. A value of '0.0'
+ shall be populated if no such identification exists
+ for this 802.11 client. "
+ REFERENCE
+ "sysObjectID from SNMPv2-MIB"
+ ::= { cDot11ClientConfigInfoEntry 25 }
+
+cDot11ClientNewKeyManagement OBJECT-TYPE
+ SYNTAX CDot11NewKeyManagementMethod
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the encryption key management methods
+ employed by this client for IEEE 802.11 wireless frame
+ encryption. If none of the bits is set, no key
+ management method is employed."
+ ::= { cDot11ClientConfigInfoEntry 26 }
+
+--********************************************************************
+--* dot11 client statistics
+--********************************************************************
+
+cDot11ClientStatisticTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CDot11ClientStatisticEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table contains statistics and status of all
+ clients on the cDot11ClientConfigInfoTable. This table
+ has a one-to-one relationship with the
+ cDot11ClientConfigInfoTable."
+ ::= { cDot11ClientStatistics 1 }
+
+cDot11ClientStatisticEntry OBJECT-TYPE
+ SYNTAX CDot11ClientStatisticEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Each entry contains statistics about errors,
+ data transmitting and receiving rates and counts
+ information of a client."
+ AUGMENTS { cDot11ClientConfigInfoEntry }
+ ::= { cDot11ClientStatisticTable 1 }
+
+CDot11ClientStatisticEntry ::=
+ SEQUENCE {
+ cDot11ClientCurrentTxRateSet OCTET STRING,
+ cDot11ClientUpTime Unsigned32,
+ cDot11ClientSignalStrength Integer32,
+ cDot11ClientSigQuality Unsigned32,
+ cDot11ClientAgingLeft Gauge32,
+ cDot11ClientPacketsReceived Counter32,
+ cDot11ClientBytesReceived Counter32,
+ cDot11ClientPacketsSent Counter32,
+ cDot11ClientBytesSent Counter32,
+ cDot11ClientDuplicates Counter32,
+ cDot11ClientMsduRetries Counter32,
+ cDot11ClientMsduFails Counter32,
+ cDot11ClientWepErrors Counter32,
+ cDot11ClientMicErrors Counter32,
+ cDot11ClientMicMissingFrames Counter32 }
+
+cDot11ClientCurrentTxRateSet OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE(1..126))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the set current transmit data rates for
+ this client. Each client can transmit data at all
+ of its configured rates. There is a maximum of 126
+ it can configure to transmit. Each octet contains
+ an integer value representing one of these 126
+ rates it is currently transmitting. Each rate shall
+ be within the range from 2 to 127, corresponding
+ to data rates in increments of 500 kb/s from
+ 1 Mb/s to 63.5 Mb/s. This value is reported in
+ transmitted Beacon, Probe Request, Probe Response,
+ Association Request, Association Response,
+ Reassociation Request, and Reassociation Response
+ frames."
+ ::= { cDot11ClientStatisticEntry 1 }
+
+cDot11ClientUpTime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The time in seconds that this client has been
+ associated with this device."
+ ::= { cDot11ClientStatisticEntry 2 }
+
+cDot11ClientSignalStrength OBJECT-TYPE
+ SYNTAX Integer32 (-100..0)
+ UNITS "dBm"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is a device-dependent measure of the signal
+ strength of the most recently received packet from
+ this client. It may be normalized or unnormalized."
+ ::= { cDot11ClientStatisticEntry 3 }
+
+cDot11ClientSigQuality OBJECT-TYPE
+ SYNTAX Unsigned32 (0..100)
+ UNITS "percentage"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is a device-dependent measure of the signal
+ quality of the most recently received packet from
+ this client."
+ ::= { cDot11ClientStatisticEntry 4 }
+
+cDot11ClientAgingLeft OBJECT-TYPE
+ SYNTAX Gauge32
+ UNITS "second"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds of aging time left for
+ this client."
+ ::= { cDot11ClientStatisticEntry 5 }
+
+cDot11ClientPacketsReceived OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packet"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received from this client."
+ ::= { cDot11ClientStatisticEntry 6 }
+
+cDot11ClientBytesReceived OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "byte"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bytes received from this client."
+ ::= { cDot11ClientStatisticEntry 7 }
+
+cDot11ClientPacketsSent OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packet"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets sent to this client."
+ ::= { cDot11ClientStatisticEntry 8 }
+
+cDot11ClientBytesSent OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "byte"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bytes sent to this client."
+ ::= { cDot11ClientStatisticEntry 9 }
+
+cDot11ClientDuplicates OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packet"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter increments when a packet for this
+ client is received and the Sequence Control field
+ in the packet header indicates the packet is a
+ duplicate."
+ ::= { cDot11ClientStatisticEntry 10 }
+
+cDot11ClientMsduRetries OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packet"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter increments when an MSDU is successfully
+ transmitted after one or more retransmissions for this
+ client."
+ ::= { cDot11ClientStatisticEntry 11 }
+
+cDot11ClientMsduFails OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packet"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This counter increments when an MSDU is not
+ transmitted successfully for this client due to the
+ number of transmit attempts exceeding some limit."
+ ::= { cDot11ClientStatisticEntry 12 }
+
+cDot11ClientWepErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packet"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of packets received from this
+ client which failed to be properly decrypted via
+ the WEP security mechanism."
+ ::= { cDot11ClientStatisticEntry 13 }
+
+cDot11ClientMicErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "error"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of MIC errors for this client."
+ ::= { cDot11ClientStatisticEntry 14 }
+
+cDot11ClientMicMissingFrames OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "packet"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This is the number of missing MIC packets for
+ this client."
+ ::= { cDot11ClientStatisticEntry 15 }
+
+
+-- *****************************************************************
+-- Conformance information
+-- *****************************************************************
+
+ciscoDot11AssocMIBConformance OBJECT IDENTIFIER
+ ::= { ciscoDot11AssociationMIB 2 }
+ciscoDot11AssocMIBCompliances OBJECT IDENTIFIER
+ ::= { ciscoDot11AssocMIBConformance 1 }
+ciscoDot11AssocMIBGroups OBJECT IDENTIFIER
+ ::= { ciscoDot11AssocMIBConformance 2 }
+
+
+--********************************************************************
+--* Compliance statements
+--********************************************************************
+
+ciscoDot11AssocMIBCompliance MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for the ciscoDot11Assoc
+ group."
+ MODULE MANDATORY-GROUPS {
+ ciscoDot11AssocGlobalGroup,
+ ciscoDot11ClientConfigGroup,
+ ciscoDot11ClientStatGroup
+ }
+ ::= { ciscoDot11AssocMIBCompliances 1 }
+
+ciscoDot11AssocMIBComplianceRev1 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for the ciscoDot11Assoc
+ group. This is deprecated in favor of the
+ ciscoDot11AssocMIBComplianceRev2."
+ MODULE MANDATORY-GROUPS {
+ ciscoDot11AssocGlobalGroup,
+ ciscoDot11ClientConfigGroup,
+ ciscoDot11ClientStatGroup,
+ ciscoDot11ClientInfoGroup
+ }
+ ::= { ciscoDot11AssocMIBCompliances 2 }
+
+ciscoDot11AssocMIBComplianceRev2 MODULE-COMPLIANCE
+ STATUS deprecated
+ DESCRIPTION
+ "The compliance statement for the ciscoDot11Assoc
+ group."
+ MODULE
+ MANDATORY-GROUPS {
+ ciscoDot11ClientConfigGroup,
+ ciscoDot11ClientStatGroup,
+ ciscoDot11ClientInfoGroup,
+ ciscoDot11IfAssocStatGroup,
+ ciscoDot11IfCipherStatGroup
+ }
+ GROUP ciscoDot11ApAssocGlobalGroup
+ DESCRIPTION
+ "This group is required only if the platform
+ is a IEEE 802.11 AP/repeater or bridge."
+
+ ::= { ciscoDot11AssocMIBCompliances 3 }
+
+ciscoDot11AssocMIBComplianceRev3 MODULE-COMPLIANCE
+ STATUS deprecated -- by ciscoDot11AssocMIBComplianceRev4
+ DESCRIPTION
+ "The compliance statement for this
+ ciscoDot11AssociationMIB module."
+ MODULE
+ MANDATORY-GROUPS {
+ ciscoDot11ClientConfigGroup,
+ ciscoDot11ClientAuthenGroup,
+ ciscoDot11ClientStatGroup,
+ ciscoDot11ClientInfoGroup,
+ ciscoDot11IfAssocStatGroup,
+ ciscoDot11IfCipherStatGroup
+ }
+ GROUP ciscoDot11ApAssocGlobalGroup
+ DESCRIPTION
+ "This group is required only if the platform
+ is a IEEE 802.11 AP/repeater or bridge."
+
+ ::= { ciscoDot11AssocMIBCompliances 4 }
+
+ciscoDot11AssocMIBComplianceRev4 MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for this
+ ciscoDot11AssociationMIB module."
+ MODULE
+ MANDATORY-GROUPS {
+ ciscoDot11ClientConfigGroup,
+ ciscoDot11ClientAuthenGroup,
+ ciscoDot11ClientStatGroup,
+ ciscoDot11ClientInfoGroup,
+ ciscoDot11IfAssocStatGroup,
+ ciscoDot11IfCipherStatGroup,
+ ciscoDot11ClientConfigExtGroup
+ }
+ GROUP ciscoDot11ApAssocGlobalGroup
+ DESCRIPTION
+ "This group is required only if the platform
+ is a IEEE 802.11 AP/repeater or bridge."
+
+ ::= { ciscoDot11AssocMIBCompliances 5 }
+
+ciscoDot11AssocMIBComplianceRev5 MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for this
+ ciscoDot11AssociationMIB module."
+ MODULE
+ MANDATORY-GROUPS {
+ ciscoDot11ClientConfigGroup,
+ ciscoDot11ClientAuthenGroup,
+ ciscoDot11ClientStatGroup,
+ ciscoDot11ClientInfoGroup,
+ ciscoDot11IfAssocStatGroup,
+ ciscoDot11IfCipherStatGroup,
+ ciscoDot11ClientConfigExtGroup,
+ ciscoDot11ClientNewAuthenGroup
+ }
+ GROUP ciscoDot11ApAssocGlobalGroup
+ DESCRIPTION
+ "This group is required only if the platform
+ is a IEEE 802.11 AP/repeater or bridge."
+
+ ::= { ciscoDot11AssocMIBCompliances 6 }
+
+
+
+--********************************************************************
+--* Units of conformance
+--********************************************************************
+
+ciscoDot11AssocGlobalGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ParentAddress,
+ cDot11ActiveWirelessClients,
+ cDot11ActiveBridges,
+ cDot11ActiveRepeaters,
+ cDot11AssStatsAssociated,
+ cDot11AssStatsAuthenticated,
+ cDot11AssStatsRoamedIn,
+ cDot11AssStatsRoamedAway,
+ cDot11AssStatsDeauthenticated,
+ cDot11AssStatsDisassociated
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "This is the device association information group.
+ This is deprecated in favor of the
+ ciscoDot11IfAssocStatGroup."
+ ::= { ciscoDot11AssocMIBGroups 1 }
+
+ciscoDot11ClientConfigGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ClientParentAddress,
+ cDot11ClientRoleClassType,
+ cDot11ClientDevType,
+ cDot11ClientRadioType,
+ cDot11ClientWepEnabled,
+ cDot11ClientWepKeyMixEnabled,
+ cDot11ClientMicEnabled,
+ cDot11ClientPowerSaveMode,
+ cDot11ClientAid,
+ cDot11ClientDataRateSet
+ }
+ STATUS current
+ DESCRIPTION
+ "This is the client configuration information group."
+ ::= { ciscoDot11AssocMIBGroups 2 }
+
+ciscoDot11ClientStatGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ClientCurrentTxRateSet,
+ cDot11ClientUpTime,
+ cDot11ClientSignalStrength,
+ cDot11ClientSigQuality,
+ cDot11ClientPacketsReceived,
+ cDot11ClientBytesReceived,
+ cDot11ClientPacketsSent,
+ cDot11ClientBytesSent,
+ cDot11ClientAgingLeft,
+ cDot11ClientDuplicates,
+ cDot11ClientMsduRetries,
+ cDot11ClientMsduFails,
+ cDot11ClientWepErrors,
+ cDot11ClientMicErrors,
+ cDot11ClientMicMissingFrames
+ }
+ STATUS current
+ DESCRIPTION
+ "This is the client statistics group."
+ ::= { ciscoDot11AssocMIBGroups 3 }
+
+ciscoDot11ClientInfoGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ClientSoftwareVersion,
+ cDot11ClientName,
+ cDot11ClientAssociationState,
+ cDot11ClientIpAddressType,
+ cDot11ClientIpAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "This group provides additional client specific
+ information."
+ ::= { ciscoDot11AssocMIBGroups 4 }
+
+ciscoDot11ApAssocGlobalGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ParentAddress
+ }
+ STATUS current
+ DESCRIPTION
+ "This group includes per AP or bridge global
+ configuration information."
+ ::= { ciscoDot11AssocMIBGroups 5 }
+
+ciscoDot11IfAssocStatGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ActiveWirelessClients,
+ cDot11ActiveBridges,
+ cDot11ActiveRepeaters,
+ cDot11AssStatsAssociated,
+ cDot11AssStatsAuthenticated,
+ cDot11AssStatsRoamedIn,
+ cDot11AssStatsRoamedAway,
+ cDot11AssStatsDeauthenticated,
+ cDot11AssStatsDisassociated
+ }
+ STATUS current
+ DESCRIPTION
+ "This group includes per IEEE 802.11 radio
+ interface association statistics."
+ ::= { ciscoDot11AssocMIBGroups 6 }
+
+ciscoDot11IfCipherStatGroup OBJECT-GROUP
+ OBJECTS {
+ cd11IfCipherMicFailClientAddress,
+ cd11IfCipherTkipLocalMicFailures,
+ cd11IfCipherTkipRemotMicFailures,
+ cd11IfCipherTkipCounterMeasInvok,
+ cd11IfCipherCcmpReplaysDiscarded,
+ cd11IfCipherTkipReplaysDetected
+ }
+ STATUS current
+ DESCRIPTION
+ "This group includes per IEEE 802.11 radio
+ interface cipher related statistics collected."
+ ::= { ciscoDot11AssocMIBGroups 7 }
+
+ciscoDot11ClientAuthenGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ClientVlanId,
+ cDot11ClientSubIfIndex,
+ cDot11ClientAuthenAlgorithm,
+ cDot11ClientAdditionalAuthen,
+ cDot11ClientDot1xAuthenAlgorithm,
+ cDot11ClientKeyManagement,
+ cDot11ClientUnicastCipher,
+ cDot11ClientMulticastCipher
+ }
+ STATUS deprecated
+ DESCRIPTION
+ "This group includes per IEEE 802.11 radio
+ interface cipher related statistics collected."
+ ::= { ciscoDot11AssocMIBGroups 8 }
+
+ciscoDot11ClientConfigExtGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ClientDevObjectID
+ }
+ STATUS current
+ DESCRIPTION
+ "This group provides more configuration
+ information about a particular associated 802.11
+ client. "
+ ::= { ciscoDot11AssocMIBGroups 9 }
+
+ciscoDot11ClientNewAuthenGroup OBJECT-GROUP
+ OBJECTS {
+ cDot11ClientNewKeyManagement
+ }
+ STATUS current
+ DESCRIPTION
+ "This group includes per IEEE 802.11 radio
+ interface cipher related statistics collected."
+ ::= { ciscoDot11AssocMIBGroups 10 }
+
+--********************************************************************
+--* End of units of conformance
+--********************************************************************
+
+END
+
generated by cgit v1.2.3 (git 2.46.0) at 2026-02-26 13:18:55 +0000