diff options
| author | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
|---|---|---|
| committer | David Leutgeb <david.leutgeb@mannundmouse.com> | 2023-12-05 12:25:34 +0100 |
| commit | 98a672123c7872f6b9b75a9a2b6bb3aea504de6a (patch) | |
| tree | 9b13bd7f563c3198047bd359195327cf28b3caf0 /MIBS/dlink/DLINKSW-POE-MIB | |
| download | mibs-main.tar.gz mibs-main.zip | |
Diffstat (limited to 'MIBS/dlink/DLINKSW-POE-MIB')
| -rw-r--r-- | MIBS/dlink/DLINKSW-POE-MIB | 700 |
1 files changed, 700 insertions, 0 deletions
diff --git a/MIBS/dlink/DLINKSW-POE-MIB b/MIBS/dlink/DLINKSW-POE-MIB new file mode 100644 index 0000000..3cfaa46 --- /dev/null +++ b/MIBS/dlink/DLINKSW-POE-MIB @@ -0,0 +1,700 @@ +-- *****************************************************************
+-- DLINKSW-POE-MIB.mib : D-Link extensions to POWER-ETHERNET-MIB (PoE)
+--
+-- Copyright (c) 2017 D-Link Corporation, all rights reserved.
+--
+-- *****************************************************************
+DLINKSW-POE-MIB DEFINITIONS ::= BEGIN
+
+ IMPORTS
+ OBJECT-GROUP, MODULE-COMPLIANCE, NOTIFICATION-GROUP
+ FROM SNMPv2-CONF
+ MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32
+ FROM SNMPv2-SMI
+ DisplayString,TruthValue
+ FROM SNMPv2-TC
+ InetAddressType, InetAddress
+ FROM INET-ADDRESS-MIB
+ PortList
+ FROM Q-BRIDGE-MIB
+ pethMainPseGroupIndex, pethPsePortIndex, pethPsePortShortCounter,
+ pethPsePortOverLoadCounter, pethPsePortPowerDeniedCounter
+ FROM POWER-ETHERNET-MIB
+ dlinkIndustrialCommon
+ FROM DLINK-ID-REC-MIB;
+
+
+ dlinkSwPoeExtMIB MODULE-IDENTITY
+ LAST-UPDATED "201703150000Z"
+ ORGANIZATION "D-Link Corp."
+ CONTACT-INFO
+ " D-Link Corporation
+ Postal: No. 289, Sinhu 3rd Rd., Neihu District,
+ Taipei City 114, Taiwan, R.O.C
+ Tel: +886-2-66000123
+ E-mail: tsd@dlink.com.tw
+ "
+ DESCRIPTION
+ "A MIB module for extending POWER-ETHERNET-MIB specified in
+ RFC 3621.
+ "
+ REVISION "201305290000Z"
+ DESCRIPTION
+ "Initial version of this MIB module."
+ REVISION "201309240000Z"
+ DESCRIPTION
+ "Add dPoeGroupIfLedMode node."
+ REVISION "201703150000Z"
+ DESCRIPTION
+ "Add dPoeIfPdAliveCfgTable table to support PD alive check feature."
+ ::= { dlinkIndustrialCommon 24 }
+
+-- -----------------------------------------------------------------------------
+ dPoeMIBNotifications OBJECT IDENTIFIER ::= { dlinkSwPoeExtMIB 0 }
+ dPoeMIBObjects OBJECT IDENTIFIER ::= { dlinkSwPoeExtMIB 1 }
+ dPoeMIBConformance OBJECT IDENTIFIER ::= { dlinkSwPoeExtMIB 2 }
+
+--------------------------------------------------------------------------------
+ dPoeGroupCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPoeGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of group configurations for PoE.
+ Group means box in the stack or module in a rack.
+ For non-modular devices, the pethMainPseGroupIndex is 1.
+ "
+ ::= { dPoeMIBObjects 1 }
+
+ dPoeGroupCfgEntry OBJECT-TYPE
+ SYNTAX DPoeGroupCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains the system configuration of the PoE on a group."
+ INDEX { pethMainPseGroupIndex }
+ ::= { dPoeGroupCfgTable 1 }
+
+ DPoeGroupCfgEntry ::= SEQUENCE {
+ dPoeGroupPolicyPreempt TruthValue,
+ dPoeGroupClearIfStatistic PortList,
+ dPoeGroupIfLedMode INTEGER
+ }
+
+ dPoeGroupPolicyPreempt OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object configures whether to disconnect the PD which is powered
+ with lower priority in order to release the power to the new connected
+ PD with higher priority under power shortage condition.
+ If this object is 'false', then the policy is first in first serviced.
+ Thus the new PD will not be serviced if the power budget is running out.
+ If this object is 'true', then the power provisioned to PD
+ with lower priority can be preempted to release the power to the new
+ connected PD with higher priority. "
+ DEFVAL { false }
+ ::= { dPoeGroupCfgEntry 1 }
+
+ dPoeGroupClearIfStatistic OBJECT-TYPE
+ SYNTAX PortList
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object is used to clear the PoE statistics of pethPsePortEntry
+ for specified ports.
+ "
+ ::= { dPoeGroupCfgEntry 2 }
+
+ dPoeGroupIfLedMode OBJECT-TYPE
+ SYNTAX INTEGER {
+ poeMode(1),
+ linkMode(2),
+ invalid(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "For some devices,port LED can indicate either poe status or link status.
+ This object is used to configure or display port LED mode.
+ poeMode(1) - indicates poe status.
+ linkMode(2) - indicates link status.
+
+ For other devices have LEDs to indicate poe status and link status separately,
+ this object only can get value of invalid(3) to mean this node is meaningless.
+ "
+ ::= { dPoeGroupCfgEntry 3 }
+-------------------------------------------------------------------------------
+ dPoeGroupInfoTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPoEGroupInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of PoE information for groups."
+ ::= { dPoeMIBObjects 2 }
+
+ dPoeGroupInfoEntry OBJECT-TYPE
+ SYNTAX DPoEGroupInfoEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains the system information of the PoE on a group."
+ INDEX { pethMainPseGroupIndex }
+ ::= { dPoeGroupInfoTable 1 }
+
+ DPoEGroupInfoEntry ::= SEQUENCE {
+ dPoeGroupMaxPorts Integer32,
+ dPoeGroupHWVersion DisplayString,
+ dPoeGroupSWVersion DisplayString
+ }
+
+ dPoeGroupMaxPorts OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the maximum number of ports that the group can support."
+ ::= { dPoeGroupInfoEntry 1 }
+
+ dPoeGroupHWVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates H/W version of PoE chip."
+ ::= { dPoeGroupInfoEntry 2 }
+
+ dPoeGroupSWVersion OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates firmware version of PoE chip."
+ ::= { dPoeGroupInfoEntry 3 }
+
+------------------------------------------------------------------------------------------------------
+ dPoeIfObjects OBJECT IDENTIFIER ::= { dPoeMIBObjects 3 }
+
+ dPoeIfCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPoeIfCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of PoE configuration
+ information for ports."
+ ::= { dPoeIfObjects 1 }
+
+ dPoeIfCfgEntry OBJECT-TYPE
+ SYNTAX DPoeIfCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains PoE configuration on a port."
+ INDEX {
+ pethMainPseGroupIndex,
+ pethPsePortIndex
+ }
+ ::= { dPoeIfCfgTable 1 }
+
+ DPoeIfCfgEntry ::= SEQUENCE {
+ dPoeIfState INTEGER,
+ dPoeIfMaxPower Integer32,
+ dPoeIfTimeRange DisplayString,
+ dPoeIfLegacyPdEnabled TruthValue
+ }
+
+ dPoeIfState OBJECT-TYPE
+ SYNTAX INTEGER {
+ auto(1),
+ never(2),
+ static(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the PoE state of the entry.
+ auto(1) - the port will automatically detect the PD and provision
+ power to the PD. The max wattage value which can be provisioned
+ to the port is determined by dPoeIfMaxPower. If dPoeIfMaxPower
+ is unspecified, then the class of the PD auto determines the
+ maximum wattage which can be provisioned. The PD will not be
+ provisioned if it requests more wattage than the max wattage
+ which is determined.
+ never(2) - indicates the port will not supply power to connected PD;
+ static(3) - indicates manager pre-allocate power budget to the port
+ by configuring the dPoeIfMaxPower object. The power budget is allocated
+ to the port even though there is no PD connected to the port.
+ If dPoeIfMaxPower is not configured, default value is 15400mW for 802.3af
+ and 30000mW for 802.3at."
+ DEFVAL {auto}
+ ::= { dPoeIfCfgEntry 1 }
+
+ dPoeIfMaxPower OBJECT-TYPE
+ SYNTAX Integer32( 0 | 1000..30000)
+ UNITS "milliwatts"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the max wattage value which can
+ be provisioned to the port.
+ Note: This object is valid only while the dPoeIfState
+ object is configured as auto or static."
+ ::= { dPoeIfCfgEntry 2 }
+
+ dPoeIfTimeRange OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..32))
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the name of time-range profile to delineate
+ the activation period.
+ A zero length string indicates the time-range is not specified.
+ Note: This object is valid only while the dPoeIfState is 'auto'."
+ ::= { dPoeIfCfgEntry 3 }
+
+ dPoeIfLegacyPdEnabled OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the state of legacy PD support."
+ DEFVAL { false }
+ ::= { dPoeIfCfgEntry 4 }
+
+------------------------------------------------------------------------------------------------------
+ dPoeIfInfoObjects OBJECT IDENTIFIER ::= { dPoeIfObjects 2 }
+
+ dPoeIfStatusTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPoeIfStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of PoE status for ports."
+ ::= { dPoeIfInfoObjects 1 }
+
+ dPoeIfStatusEntry OBJECT-TYPE
+ SYNTAX DPoeIfStatusEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry consists of PoE status for a port."
+ INDEX { pethMainPseGroupIndex,pethPsePortIndex }
+ ::= { dPoeIfStatusTable 1 }
+
+ DPoeIfStatusEntry ::= SEQUENCE {
+ dPoeIfDetectStatus INTEGER,
+ dPoeIfFaultyType INTEGER
+ }
+
+ dPoeIfDetectStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ disabled(1),
+ searching(2),
+ requesting(3),
+ delivering(4),
+ faulty(5)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the operational status of the port PD detection.
+ disabled(1) - PSE function is disabled.
+ searching(2) - Remote PD is not connected.
+ requesting(3) - Remote PD is inserted, but the PSE doesn't provide power yet.
+ delivering(4) - Remote PD is now powering by PoE system.
+ faulty(5) - Device detection or a powered device is in a faulty state.
+ "
+ ::= { dPoeIfStatusEntry 1 }
+
+ dPoeIfFaultyType OBJECT-TYPE
+ SYNTAX INTEGER {
+ notApplicable(0),
+ mpsAbsent(1),
+ pdShort(2),
+ overload(3),
+ powerDenied(4),
+ thermalShutdown(5),
+ startupFailure(6),
+ classificationFailure(7)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the specific faulty type. It is meaningful
+ only when dPoeIfDetectStatus object is 'faulty'.
+ notApplicable(0) - indicates this object is meaningless, e.g. the
+ dPoeIfDetectStatus is not 'faulty'.
+ mpsAbsent(1) - indicates MPS(Maintain Power Signature) Absent
+ pdShort(2) - indicates PD Short
+ overload(3) - indicates Overload
+ powerDenied(4) - indicates Power Denied
+ thermalShutdown(5)- indicates Thermal Shutdown
+ startupFailure(6) - indicates Startup Failure
+ classificationFailure(7) - indicates Classification Failure(IEEE 802.3at)
+ "
+ ::= { dPoeIfStatusEntry 2 }
+
+------------------------------------------------------------------------------------------------------
+ dPoeIfMeasurementTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPoEIfMeasurementEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of POE measurement
+ information for ports."
+ ::= { dPoeIfInfoObjects 2 }
+
+ dPoeIfMeasurementEntry OBJECT-TYPE
+ SYNTAX DPoEIfMeasurementEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry consists of PoE measurement information of a port."
+ INDEX {
+ pethMainPseGroupIndex,
+ pethPsePortIndex
+ }
+ ::= { dPoeIfMeasurementTable 1 }
+
+ DPoEIfMeasurementEntry ::= SEQUENCE {
+ dPoeIfVoltage Integer32,
+ dPoeIfCurrent Integer32,
+ dPoeIfTemperature Integer32,
+ dPoeIfPower Integer32
+ }
+
+ dPoeIfVoltage OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "millivolts"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the voltage of the port in millivolts."
+ ::= { dPoeIfMeasurementEntry 1 }
+
+ dPoeIfCurrent OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "milliamperes"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the current of port in milliamperes."
+ ::= { dPoeIfMeasurementEntry 2 }
+
+ dPoeIfTemperature OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Degree Centigrade"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates the temperature of port in degrees centigrade."
+ ::= { dPoeIfMeasurementEntry 3 }
+
+ dPoeIfPower OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object indicates consumption power of port in milliwatts."
+ ::= { dPoeIfMeasurementEntry 4 }
+
+---------------------------------------------------------------------------------
+-- Add a new table for SNR-20170223-001(ASV2.1)(PD alive check)
+---------------------------------------------------------------------------------
+ dPoeIfPdAliveCfgTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF DPoeIfPdAliveCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table consists of a list of configuration for the PD
+ alive check function for ports.
+ The PD alive check feature provides the solution for
+ PD device that has the stop working or no response
+ problem via Ping mechanism.
+ Detailed Process:
+ The detailed processes are described as follows:
+ 1. The system needs to periodically monitor the
+ specific PD by using Ping function. If there is no
+ response, system takes one of the following actions:
+ (1) Reset: Switch resets (disable then enable) PoE
+ power on the port which connects to a PD under monitoring.
+ (2) Notify: Switch sends logs and traps to notify the administrator.
+ (3) Both: Switch sends logs and traps, and resets the PoE port power.
+ 2. The system should implement the retry mechanism to check
+ PD aliveness, hence the system will reset the PoE port power
+ feeding after the retry by using Ping without any response from a PD.
+ 3. If the action is Reset or Both, the system needs
+ to wait for PD recovery from rebooting and then executes
+ the Ping function again. Besides, the waiting time can
+ be configured by users.
+ 4. If PoE schedule (time range) function is configured
+ on the port which enables the PD Alive Check function,
+ the time range function has the top priority, and
+ therefore PD Alive Check function will not work
+ while PoE time range function is still active.
+ 5. This function only takes effect on PoE enabled
+ port with power feeding.
+
+ Note: It is required to setup IP settings properly that
+ the PD can be reachable for Ping, otherwise this function
+ cannot work as expected.
+
+ Limitation
+ 1. Support Ping Function: If the PD does not support ICMP,
+ this function cannot work normally.
+ 2. Direct-Connected PD: The Reset Action can only work on
+ the direct-connected PD. If the PD is not connected directly,
+ the Reset Action may not work as expected.
+ 3. PD Also Acts as PSE: If the direct-connected PD is also a PSE,
+ all the next level PDs connect to this PSE will be power cycling
+ whenever PD Alive Check function takes effect on 'Reset' or 'Both' Action."
+ ::= { dPoeIfObjects 3 }
+
+ dPoeIfPdAliveCfgEntry OBJECT-TYPE
+ SYNTAX DPoeIfPdAliveCfgEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry contains configuration for PD alive check on a port."
+ INDEX {
+ pethMainPseGroupIndex,
+ pethPsePortIndex
+ }
+ ::= { dPoeIfPdAliveCfgTable 1 }
+
+ DPoeIfPdAliveCfgEntry ::= SEQUENCE {
+ dPoeIfPdAliveCfgState INTEGER,
+ dPoeIfPdAliveCfgPdIpType InetAddressType,
+ dPoeIfPdAliveCfgPdIpAddr InetAddress,
+ dPoeIfPdAliveCfgInterval Unsigned32,
+ dPoeIfPdAliveCfgRetry Unsigned32,
+ dPoeIfPdAliveCfgWaitTime Unsigned32,
+ dPoeIfPdAliveCfgAction INTEGER
+ }
+
+ dPoeIfPdAliveCfgState OBJECT-TYPE
+ SYNTAX INTEGER {
+ enabled(1),
+ disabled(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the the PD alive function sate.
+ enabled - Enable the PD alive check function
+ disabled - Disable the PD alive check function.
+
+"
+ DEFVAL { disabled }
+ ::= { dPoeIfPdAliveCfgEntry 1 }
+
+ dPoeIfPdAliveCfgPdIpType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the IP address type of the target PD."
+ ::= { dPoeIfPdAliveCfgEntry 2 }
+
+ dPoeIfPdAliveCfgPdIpAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the IP address of the target PD."
+ ::= { dPoeIfPdAliveCfgEntry 3 }
+
+ dPoeIfPdAliveCfgInterval OBJECT-TYPE
+ SYNTAX Unsigned32 (10..300)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the time interval for system
+ issues ping request to detect the target PD.
+ The valid range for interval time is 10s to 300s."
+ DEFVAL { 30 }
+ ::= { dPoeIfPdAliveCfgEntry 4 }
+
+ dPoeIfPdAliveCfgRetry OBJECT-TYPE
+ SYNTAX Unsigned32 (0..5)
+ UNITS "times"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the retry count of ping
+ request when PD has no response.
+ The valid range for retry count is 0 to 5 times."
+ DEFVAL { 2}
+ ::= { dPoeIfPdAliveCfgEntry 5 }
+
+
+ dPoeIfPdAliveCfgWaitTime OBJECT-TYPE
+ SYNTAX Unsigned32 (30..300)
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the waiting time for PD reboot.
+ The valid range for waiting time is 30s to 300s."
+ DEFVAL { 90 }
+ ::= { dPoeIfPdAliveCfgEntry 6 }
+
+ dPoeIfPdAliveCfgAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ reset(1),
+ notify(2),
+ both(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This object indicates the action when PD doesn't reply the ping request.
+ reset- System will reset the PoE port state .
+ notify- System will send log and trap to notify the administrator.
+ both- System will send log and trap first and reset the PoE port state."
+ DEFVAL { both }
+ ::= { dPoeIfPdAliveCfgEntry 7 }
+
+-- *****************************************************************************
+-- MIB Notifications
+-- *****************************************************************************
+ dPoeIfPowerDeniedNotification NOTIFICATION-TYPE
+ OBJECTS { pethPsePortPowerDeniedCounter }
+ STATUS current
+ DESCRIPTION
+ " This Notification indicates if PSE state diagram enters
+ the state POWER_DENIED.
+ At least 500 msec must elapse between notifications
+ being emitted by the same object instance."
+ ::= { dPoeMIBNotifications 1 }
+
+ dPoeIfPowerOverLoadNotification NOTIFICATION-TYPE
+ OBJECTS { pethPsePortOverLoadCounter }
+ STATUS current
+ DESCRIPTION
+ " This Notification indicates if PSE state diagram enters
+ the state ERROR_DELAY_OVER.
+ At least 500 msec must elapse between notifications
+ being emitted by the same object instance."
+ ::= { dPoeMIBNotifications 2 }
+
+ dPoeIfPowerShortCircuitNotification NOTIFICATION-TYPE
+ OBJECTS { pethPsePortShortCounter }
+ STATUS current
+ DESCRIPTION
+ " This Notification indicates if PSE state diagram enters
+ the state ERROR_DELAY_SHORT.
+ At least 500 msec must elapse between notifications
+ being emitted by the same object instance."
+ ::= { dPoeMIBNotifications 3 }
+
+ dPoeIfPdAliveFailOccurNotification NOTIFICATION-TYPE
+ OBJECTS { pethMainPseGroupIndex,
+ pethPsePortIndex,
+ dPoeIfPdAliveCfgPdIpType,
+ dPoeIfPdAliveCfgPdIpAddr
+ }
+ STATUS current
+ DESCRIPTION
+ " This Notification indicates if the PD device has
+ the stop working or no response problem."
+ ::= { dPoeMIBNotifications 4 }
+
+-- *****************************************************************************
+-- MIB Conformance statements
+-- *****************************************************************************
+ dPoeMIBCompliances OBJECT IDENTIFIER ::= { dPoeMIBConformance 1 }
+
+ dPoeMIBGroups OBJECT IDENTIFIER ::= { dPoeMIBConformance 2 }
+ dPoeMIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for entities which implement the
+ DLINKSW-POE-MIB."
+ MODULE -- this module
+ MANDATORY-GROUPS {
+ dPoeGroupCfgGroup,
+ dPoeIfCfgGroup,
+ dPoeGroupInfoGroup,
+ dPoeIfInfoGroup,
+ dPoeIfErrorStateNotificationGroup,
+ dPoeIfPdAliveCfgGroup
+ }
+
+ ::= { dPoeMIBCompliances 1 }
+
+ dPoeGroupCfgGroup OBJECT-GROUP
+ OBJECTS {
+ dPoeGroupPolicyPreempt,
+ dPoeGroupIfLedMode
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects to configure or display the group-specific PoE information."
+ ::= { dPoeMIBGroups 1 }
+
+ dPoeIfCfgGroup OBJECT-GROUP
+ OBJECTS {
+ dPoeGroupClearIfStatistic,
+ dPoeIfState,
+ dPoeIfMaxPower,
+ dPoeIfTimeRange,
+ dPoeIfLegacyPdEnabled
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects configure or display the ports information."
+ ::= { dPoeMIBGroups 2 }
+
+ dPoeGroupInfoGroup OBJECT-GROUP
+ OBJECTS {
+ dPoeGroupMaxPorts,
+ dPoeGroupHWVersion,
+ dPoeGroupSWVersion
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects display the groups information."
+ ::= { dPoeMIBGroups 3 }
+
+ dPoeIfInfoGroup OBJECT-GROUP
+ OBJECTS {
+ dPoeIfDetectStatus,
+ dPoeIfFaultyType,
+ dPoeIfVoltage,
+ dPoeIfCurrent,
+ dPoeIfTemperature,
+ dPoeIfPower
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects display the ports information."
+ ::= { dPoeMIBGroups 4 }
+
+ dPoeIfErrorStateNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { dPoeIfPowerDeniedNotification,
+ dPoeIfPowerOverLoadNotification,
+ dPoeIfPowerShortCircuitNotification
+ }
+ STATUS current
+ DESCRIPTION "A collection of objects provides ports error state notifications."
+ ::= { dPoeMIBGroups 5 }
+
+ dPoeIfPdAliveCfgGroup OBJECT-GROUP
+ OBJECTS {
+ dPoeIfPdAliveCfgState,
+ dPoeIfPdAliveCfgPdIpType,
+ dPoeIfPdAliveCfgPdIpAddr,
+ dPoeIfPdAliveCfgInterval,
+ dPoeIfPdAliveCfgRetry,
+ dPoeIfPdAliveCfgWaitTime,
+ dPoeIfPdAliveCfgAction
+ }
+ STATUS current
+ DESCRIPTION
+ "A collection of objects display the PD alive check configuration."
+ ::= { dPoeMIBGroups 6 }
+
+END
|