Initial commitHEADmain

100 files changed, 93614 insertions, 0 deletions

diff --git a/MIBS/telco-systems/binos/MPLS-LSR-MIB b/MIBS/telco-systems/binos/MPLS-LSR-MIB
new file mode 100644
index 0000000..0cdae64
--- /dev/null
+++ b/MIBS/telco-systems/binos/MPLS-LSR-MIB
@@ -0,0 +1,2179 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   MPLS-LSR-MIB.mib
+-- ** Project:    T-Metro Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2006, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+
+MPLS-LSR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+   Integer32, Unsigned32, zeroDotZero
+      FROM SNMPv2-SMI                                    -- [RFC2578]
+   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF                                   -- [RFC2580]
+   TruthValue, RowStatus, StorageType, RowPointer,
+   TEXTUAL-CONVENTION
+      FROM SNMPv2-TC                                     -- [RFC2579]
+   InterfaceIndexOrZero, ifGeneralInformationGroup,
+   ifCounterDiscontinuityGroup
+      FROM IF-MIB                                        -- [RFC2863]
+   mplsStdMIB, MplsLSPID, MplsLabel, MplsBitRate,
+   MplsOwner, MplsBurstSize
+      FROM MPLS-TC-PRIV-STDEXT-MIB                               -- [RFC3811]
+   AddressFamilyNumbers
+      FROM IANA-ADDRESS-FAMILY-NUMBERS-MIB               -- [IANAFamily]
+   InetAddress, InetAddressType
+      FROM INET-ADDRESS-MIB                              -- [RFC3291]
+   prvtlmgrLsrEntityLsrIndex
+      FROM PRVT-LMGR-MIB
+   mpls				 		FROM PRVT-CR-LDP-MIB;
+
+
+mplsLsrMIB MODULE-IDENTITY
+   LAST-UPDATED "200712060000Z" 
+      ORGANIZATION "BATM Advanced Communication"
+      CONTACT-INFO
+                   " BATM/Telco Systems Support team
+					Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+   DESCRIPTION
+       "This MIB module contains managed object definitions for
+        the Multiprotocol Label Switching (MPLS) Router as
+        defined in: Rosen, E., Viswanathan, A., and R.
+        Callon, Multiprotocol Label Switching Architecture,
+        RFC 3031, January 2001.
+
+        Copyright (C) The Internet Society (2004). The
+        initial version of this MIB module was published
+        in RFC 3812. For full legal notices see the RFC
+        itself or see:
+        http://www.ietf.org/copyrights/ianamib.html"
+
+   -- Revision history.
+    REVISION
+       "200712060000Z"    
+   DESCRIPTION
+       "Update the mib with new functionality and optimisations"
+     ::= { mpls 5 }
+
+
+-- Textual Conventions.
+
+MplsIndexType ::= TEXTUAL-CONVENTION
+   STATUS        current
+   DESCRIPTION
+       "This is an octet string that can be used as a table
+        index in cases where a large addressable space is
+        required such as on an LSR where many applications
+        may be provisioning labels.
+
+        Note that the string containing the single octet with
+        the value 0x00 is a reserved value used to represent
+        special cases. When this TEXTUAL-CONVENTION is used
+        as the SYNTAX of an object, the DESCRIPTION clause
+        MUST specify if this special value is valid and if so
+        what the special meaning is.
+
+        In systems that provide write access to the MPLS-LSR-STD
+        MIB, mplsIndexType SHOULD be used as a simple multi-digit
+        integer encoded as an octet string.
+        No further overloading of the meaning of an index SHOULD
+        be made.
+
+        In systems that do not offer write access to the MPLS-LSR-STD
+        MIB, the mplsIndexType may contain implicit formatting that is
+        specific to the implementation to convey additional
+        information such as interface index, physical card or
+        device, or application id. The interpretation of this
+        additional formatting is implementation dependent and
+        not covered in this document. Such formatting MUST
+        NOT impact the basic functionality of read-only access
+        to the MPLS-LSR-STD MIB by management applications that are
+        not aware of the formatting rules.
+
+        The MIB is implemented in PRVT-LMGR with write-access.
+        As specified above, PRVT-LMGR treats the index values of this type
+        as simple integer types.
+
+        In order to reduce the effort required to upgrade from earlier
+        versions of the MIB, and to simplify management of static LSPs,
+        this type is mapped on to an Integer32 in this implementation."
+   SYNTAX  Integer32 (0..2147483647)
+
+MplsIndexNextType ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+       "When a MIB module is used for configuration, an object with
+        this SYNTAX always contains a legal value (a non-zero-length
+        string) for an index that is not currently used in the relevant
+        table. The Command Generator (Network Management Application)
+        reads this variable and uses the (non-zero-length string)
+        value read when creating a new row with an SNMP SET.
+
+        When the SET is performed, the Command Responder (agent) must
+        determine whether the value is indeed still unused; Two Network
+        Management Applications may attempt to create a row
+        (configuration entry) simultaneously and use the same value. If
+        it is currently unused, the SET succeeds and the Command
+        Responder (agent) changes the value of this object, according
+        to an implementation-specific algorithm.  If the value is in
+        use, however, the SET fails.  The Network Management
+        Application must then re-read this variable to obtain a new
+        usable value.
+
+        Note that the string containing the single octet with
+        the value 0x00 is a reserved value used to represent
+        the special case where no additional indexes can be
+        provisioned, or in systems that do not offer
+        write access, objects defined using this TEXTUAL-CONVENTION
+        MUST return the string containing the single
+        octet with the value 0x00.
+
+        The MplsIndexType is an Integer32 in this version of the MIB.
+        Accordingly, the MplsIndexNextType is also an Integer32, with
+        the special value of 0 indicating that no further index
+        values are available."
+   SYNTAX              Integer32 (0..2147483647)
+-- Top level components of this MIB.
+
+-- Tables, Scalars
+mplsLsrObjects       OBJECT IDENTIFIER ::= { mplsLsrMIB 1 }
+
+-- Notifications
+mplsLsrNotifications OBJECT IDENTIFIER ::= { mplsLsrMIB 2 }
+mplsLsrNotifyPrefix OBJECT IDENTIFIER ::= { mplsLsrNotifications 0 }
+
+
+-- Conformance
+mplsLsrConformance   OBJECT IDENTIFIER ::= { mplsLsrMIB 3 }
+
+-- MPLS Interface Table.
+mplsInterfaceTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInterfaceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table is created by an LSR for
+        every interface capable of supporting MPLS. The
+        entry with index 0 represents the per-platform label
+        space and contains parameters that apply to all
+        interfaces that participate in the per-platform
+        label space. Other entries defined in this table
+        represent additional MPLS interfaces that may
+        participate in either the per-platform or
+        per-interface label spaces, or both. Additional
+        information about label space participation of an
+        interface is provided in the description clause of
+        mplsInterfaceLabelParticipType."
+   ::= { mplsLsrObjects 1 }
+
+mplsInterfaceEntry OBJECT-TYPE
+   SYNTAX        MplsInterfaceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "A conceptual row in this table is created
+        automatically by an LSR for every interface capable
+        of supporting MPLS and which is configured to do so.
+        A conceptual row in this table will exist if and only if
+        a corresponding entry in ifTable exists with ifType =
+        mpls(166). If this associated entry in ifTable is
+        operationally disabled (thus removing MPLS
+        capabilities on that interface), the corresponding
+        entry in this table MUST be deleted shortly thereafter.
+        An conceptual row with index 0 is created if the LSR
+        supports per-platform labels. This conceptual row
+        represents the per-platform label space and contains
+        parameters that apply to all interfaces that participate
+        in the per-platform label space. Other conceptual rows
+        in this table represent MPLS interfaces that may
+        participate in either the per-platform or per-
+        interface label spaces, or both.  Implementations
+        that either only support per-platform labels,
+        or have only them configured, may choose to return
+        just the mplsInterfaceEntry of 0 and not return
+        the other rows. This will greatly reduce the number
+        of objects returned. Further information about label
+        space participation of an interface is provided in
+        the DESCRIPTION clause of
+        mplsInterfaceLabelParticipType.
+
+        Private EXTENSION. This MIB table is also
+        indexed by the PRVT-LMGR product index."
+   INDEX       { prvtlmgrLsrEntityLsrIndex, mplsInterfaceIndex }
+      ::= { mplsInterfaceTable 1 }
+
+MplsInterfaceEntry ::= SEQUENCE {
+  mplsInterfaceIndex                  InterfaceIndexOrZero,
+  mplsInterfaceLabelMinIn             MplsLabel,
+  mplsInterfaceLabelMaxIn             MplsLabel,
+  mplsInterfaceLabelMinOut            MplsLabel,
+  mplsInterfaceLabelMaxOut            MplsLabel,
+  mplsInterfaceTotalBandwidth         MplsBitRate,
+  mplsInterfaceAvailableBandwidth     MplsBitRate,
+  mplsInterfaceLabelParticipType BITS,
+  mplsInterfaceSwitchMngedLblSpace TruthValue
+}
+
+mplsInterfaceIndex OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This is a unique index for an entry in the
+        MplsInterfaceTable.  A non-zero index for an
+        entry indicates the ifIndex for the corresponding
+        interface entry of the MPLS-layer in the ifTable.
+        The entry with index 0 represents the per-platform
+        label space and contains parameters that apply to all
+        interfaces that participate in the per-platform label
+        space. Other entries defined in this table represent
+        additional MPLS interfaces that may participate in either
+        the per-platform or per-interface label spaces, or both."
+   REFERENCE
+       "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+        and F. Kastenholtz, June 2000"
+   ::= { mplsInterfaceEntry 2 }
+
+mplsInterfaceLabelMinIn OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This is the minimum value of an MPLS label that this
+        LSR is willing to receive on this interface."
+   ::= { mplsInterfaceEntry 3 }
+
+mplsInterfaceLabelMaxIn OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This is the maximum value of an MPLS label that this
+        LSR is willing to receive on this interface."
+   ::= { mplsInterfaceEntry 4 }
+
+mplsInterfaceLabelMinOut OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This is the minimum value of an MPLS label that this
+        LSR is willing to send on this interface."
+   ::= { mplsInterfaceEntry 5 }
+
+mplsInterfaceLabelMaxOut OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This is the maximum value of an MPLS label that this
+        LSR is willing to send on this interface."
+   ::= { mplsInterfaceEntry 6 }
+
+mplsInterfaceTotalBandwidth        OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "kilobits per second"
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value indicates the total amount of usable
+        bandwidth on this interface and is specified in
+        kilobits per second (Kbps).  This variable is not
+        applicable when applied to the interface with index
+        0. When this value cannot be measured, this value
+        should contain the nominal bandwidth."
+::= { mplsInterfaceEntry 7 }
+
+mplsInterfaceAvailableBandwidth       OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value indicates the total amount of available
+        bandwidth available on this interface and is
+        specified in kilobits per second (Kbps).  This value
+        is calculated as the difference between the amount
+        of bandwidth currently in use and that specified in
+        mplsInterfaceTotalBandwidth.  This variable is not
+        applicable when applied to the interface with index
+        0. When this value cannot be measured, this value
+        should contain the nominal bandwidth."
+::= { mplsInterfaceEntry 8 }
+
+mplsInterfaceLabelParticipType OBJECT-TYPE
+   SYNTAX  BITS {
+                perPlatform (0),
+                perInterface (1)
+              }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "If the value of the mplsInterfaceIndex for this
+        entry is zero, then this entry corresponds to the
+        per-platform label space for all interfaces configured
+        to use that label space. In this case the perPlatform(0)
+        bit MUST be set; the perInterface(1) bit is meaningless
+        and MUST be ignored.
+
+        The remainder of this description applies to entries
+        with a non-zero value of mplsInterfaceIndex.
+
+        If the perInterface(1) bit is set then the value of
+        mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn,
+        mplsInterfaceLabelMinOut, and
+        mplsInterfaceLabelMaxOut for this entry reflect the
+        label ranges for this interface.
+
+        If only the perPlatform(0) bit is set, then the value of
+        mplsInterfaceLabelMinIn, mplsInterfaceLabelMaxIn,
+        mplsInterfaceLabelMinOut, and
+        mplsInterfaceLabelMaxOut for this entry MUST be
+        identical to the instance of these objects with
+        index 0.These objects may only vary from the entry
+        with index 0 if both the perPlatform(0) and perInterface(1)
+        bits are set.
+
+        In all cases, at a minimum one of the perPlatform(0) or
+        perInterface(1) bits MUST be set to indicate that
+        at least one label space is in use by this interface. In
+        all cases, agents MUST ensure that label ranges are
+        specified consistently and MUST return an
+        inconsistentValue error when they do not."
+   REFERENCE
+       "Rosen, E., Viswanathan, A., and R. Callon,
+        Multiprotocol Label Switching Architecture, RFC
+        3031, January 2001."
+::= { mplsInterfaceEntry 9 }
+
+mplsInterfaceSwitchMngedLblSpace OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This value indicates whether or not the label space
+        for this interface is managed by the switch itself,
+        rather than by the Label Manager."
+::= { mplsInterfaceEntry 10 }
+
+-- End of mplsInterfaceTable
+
+-- In-segment Index next table.
+
+mplsInSegmentIndexNextTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInSegmentIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next appropriate value to be used
+        for mplsInSegmentIndex when creating entries in the
+        mplsInSegmentTable. If the number of unassigned entries is
+        exhausted, the mplsInSegmentIndexNext object will take the
+        value of 0."
+   ::= { mplsLsrObjects 3 }
+
+mplsInSegmentIndexNextEntry OBJECT-TYPE
+   SYNTAX        MplsInSegmentIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        mplsInSegmentIndex for a specific Label Manager entity.
+        This MIB table is indexed by the PRVT-LMGR entity Index."
+   INDEX { prvtlmgrLsrEntityLsrIndex }
+       ::= { mplsInSegmentIndexNextTable 1 }
+
+MplsInSegmentIndexNextEntry ::= SEQUENCE {
+  mplsInSegmentIndexNext            MplsIndexNextType
+}
+
+mplsInSegmentIndexNext OBJECT-TYPE
+   SYNTAX        MplsIndexNextType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next available value to
+        be used for mplsInSegmentIndex when creating entries
+        in the mplsInSegmentTable.
+
+        The special value of 0 indicates that no new entries
+        can be created in this table.
+
+        Agents not allowing managers to create entries
+        in this table MUST set this object to this special
+        value."
+      ::= { mplsInSegmentIndexNextEntry 2 }
+
+-- End of mplsInSegmentIndexNextTable
+
+
+-- in-segment table.
+mplsInSegmentTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInSegmentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains a description of the incoming MPLS
+        segments (labels) to an LSR and their associated parameters.
+        The index for this table is mplsInSegmentIndex.
+        The index structure of this table is specifically designed
+        to handle many different MPLS implementations that manage
+        their labels both in a distributed and centralized manner.
+        The table is also designed to handle existing MPLS labels
+        as defined in RFC3031 as well as longer ones that may
+        be necessary in the future.
+
+        In cases where the label cannot fit into the
+        mplsInSegmentLabel object, the mplsInSegmentLabelPtr
+        will indicate this by being set to the first accessible
+        column in the appropriate extension table's row.
+        In this case an additional table MUST
+        be provided and MUST be indexed by at least the indexes
+        used by this table. In all other cases when the label is
+        represented within the mplsInSegmentLabel object, the
+        mplsInSegmentLabelPtr MUST be set to 0.0. Due to the
+        fact that MPLS labels may not exceed 24 bits, the
+        mplsInSegmentLabelPtr object is only a provision for
+        future-proofing the MIB module. Thus, the definition
+        of any extension tables is beyond the scope of this
+        MIB module.
+
+        Entries in the table cannot be created by management for
+        incoming MPLS segments associated with interfaces using the
+        Switch Managed Label Space (SMLS); that is when
+        mplsInterfaceSwitchMngedLblSpace is set to true for the
+        interface."
+   ::= { mplsLsrObjects 4 }
+
+mplsInSegmentEntry  OBJECT-TYPE
+   SYNTAX        MplsInSegmentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents one incoming
+        segment as is represented in an LSR's LFIB.
+        An entry can be created by a network
+        administrator or an SNMP agent, or an MPLS signaling
+        protocol.  The creator of the entry is denoted by
+        mplsInSegmentOwner.  An entry in this table is
+        indexed by the ifIndex of the incoming interface and
+        the (top) label.
+
+        The value of mplsInSegmentRowStatus cannot be active(1)
+        unless the ifTable entry corresponding to
+        mplsInSegmentInterface exists.  An entry in this table
+        must match any incoming packets, and indicates an
+        instance of mplsXCEntry based on which forwarding
+        and/or switching actions are taken.
+
+        Private EXTENSION. This MIB table is also
+        indexed by the LMGR product Index."
+   INDEX         { prvtlmgrLsrEntityLsrIndex, 
+                   mplsInSegmentIndex }
+   ::= { mplsInSegmentTable 1 }
+
+MplsInSegmentEntry ::= SEQUENCE {
+  mplsInSegmentIndex                MplsIndexType,
+  mplsInSegmentInterface            InterfaceIndexOrZero,
+  mplsInSegmentLabel                MplsLabel,
+  mplsInSegmentLabelPtr             RowPointer,
+  mplsInSegmentNPop                 Integer32,
+  mplsInSegmentAddrFamily           AddressFamilyNumbers,
+  mplsInSegmentXCIndex              MplsIndexType,
+  mplsInSegmentOwner                MplsOwner,
+  mplsInSegmentTrafficParamPtr      RowPointer,
+  mplsInSegmentRowStatus            RowStatus,
+  mplsInSegmentStorageType          StorageType
+}
+
+mplsInSegmentIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "The index for this in-segment.
+       The value 0 MUST not be used as an index."
+
+   ::= { mplsInSegmentEntry 2 }
+
+mplsInSegmentInterface OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object represents the
+        interface index for the incoming MPLS interface.  A
+        value of zero represents all interfaces participating in
+        the per-platform label space.  This may only be used
+        in cases where the incoming interface and label
+        are associated with the same mplsXCEntry. Specifically,
+        given a label and any incoming interface pair from the
+        per-platform label space, the outgoing label/interface
+        mapping remains the same. If this is not the case,
+        then individual entries MUST exist that
+        can then be mapped to unique mplsXCEntries."
+   ::= { mplsInSegmentEntry 3 }
+
+mplsInSegmentLabel OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "If the corresponding instance of mplsInSegmentLabelPtr is
+      zeroDotZero then this object MUST contain the incoming label
+      associated with this in-segment. If not this object SHOULD
+      be zero and MUST be ignored."
+   ::= { mplsInSegmentEntry 4 }
+
+mplsInSegmentLabelPtr OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "If the label for this segment cannot be represented
+        fully within the mplsInSegmentLabel object,
+        this object MUST point to the first accessible
+        column of a conceptual row in an external table containing
+        the label.  In this case, the mplsInSegmentTopLabel
+        object SHOULD be set to 0 and ignored. This object MUST
+        be set to zeroDotZero otherwise.
+
+        In the this implementation, this object points at an entry in
+        the gmplsLabelTable.  Configuration of static LSPs using big
+        labels is not currently supported by PRVT-LMGR, and so the
+        gmplsLabelTable and this object are read-only."
+   DEFVAL { zeroDotZero }
+   ::= { mplsInSegmentEntry 5 }
+
+mplsInSegmentNPop OBJECT-TYPE
+   SYNTAX        Integer32 (1..2147483647)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The number of labels to pop from the incoming
+        packet.  Normally only the top label is popped from
+        the packet and used for all switching decisions for
+        that packet.  This is indicated by setting this
+        object to the default value of 1. If an LSR supports
+        popping of more than one label, this object MUST
+        be set to that number. This object cannot be modified
+        if mplsInSegmentRowStatus is active(1)."
+   DEFVAL        { 1 }
+   ::= { mplsInSegmentEntry 6 }
+
+mplsInSegmentAddrFamily OBJECT-TYPE
+   SYNTAX        AddressFamilyNumbers
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The IANA address family [IANAFamily] of packets
+        received on this segment, which is used at an egress
+        LSR to deliver them to the appropriate layer 3 entity.
+        A value of other(0) indicates that the family type is
+        either unknown or undefined; this SHOULD NOT be used
+        at an egress LSR. This object cannot be
+        modified if mplsInSegmentRowStatus is active(1)."
+   REFERENCE
+       "Internet Assigned Numbers Authority (IANA), ADDRESS
+        FAMILY NUMBERS, (http://www.iana.org/assignments/
+        address-family-numbers), for MIB see:
+        http://www.iana.org/assignments/
+        ianaaddressfamilynumbers-mib"
+   DEFVAL        { other }
+   ::= { mplsInSegmentEntry 7 }
+
+mplsInSegmentXCIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Index into the mplsXCTable which identifies which
+        cross-connect entry this segment is part of.
+
+        The value 0 indicates that this entry is not referred
+        to by any cross-connect entry.
+
+        When a cross-connect entry is created which this
+        in-segment is a part of, this object is automatically
+        updated to reflect the value of mplsXCIndex of that
+        cross-connect entry."
+   ::= { mplsInSegmentEntry 8 }
+
+mplsInSegmentOwner OBJECT-TYPE
+   SYNTAX        MplsOwner
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Denotes the entity that created and is responsible
+        for managing this segment."
+   ::= { mplsInSegmentEntry 9 }
+
+mplsInSegmentTrafficParamPtr OBJECT-TYPE
+   SYNTAX            RowPointer
+   MAX-ACCESS        read-create
+   STATUS            current
+   DESCRIPTION
+     "This variable represents a pointer to the traffic
+      parameter specification for this in-segment.  This
+      value may point at an entry in the
+      mplsTrafficParamTable to indicate which
+      mplsTrafficParamEntry is to be assigned to this
+      segment.  This value may optionally point at an
+      externally defined traffic parameter specification
+      table.  A value of zeroDotZero indicates best-effort
+      treatment.  By having the same value of this object,
+      two or more segments can indicate resource sharing
+      of such things as LSP queue space, etc.
+
+      This object cannot be modified if mplsInSegmentRowStatus
+      is active(1).  For entries in this table that
+      are preserved after a re-boot, the agent MUST ensure
+      that their integrity be preserved, or this object should
+      be set to 0.0 if it cannot.
+      In this implementation, the object must point at an
+      entry in the mplsTrafficParamTable."
+   DEFVAL { zeroDotZero }
+   ::= { mplsInSegmentEntry 10 }
+
+mplsInSegmentRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable is used to create, modify, and/or
+        delete a row in this table. When a row in this
+        table has a row in the active(1) state, no
+        objects in this row can be modified except the
+        mplsInSegmentRowStatus and mplsInSegmentStorageType."
+   ::= { mplsInSegmentEntry 11 }
+
+mplsInSegmentStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object. The agent MUST ensure that this object's
+        value remains consistent with the associated
+        mplsXCEntry. Conceptual rows having the value
+        'permanent' need not allow write-access to any
+        columnar objects in the row."
+   REFERENCE
+        "See RFC2579."
+   DEFVAL        { volatile }
+   ::= { mplsInSegmentEntry 12 }
+
+-- End of mplsInSegmentTable
+
+-- Out-segment table.
+
+-- Private EXTENSION.  The mplsOutSegmentIndexNext object is
+-- implemented as a row in a table to allow for multiple instances of
+-- PRVT-LMGR entities within a managed node.
+
+mplsOutSegmentIndexNextTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsOutSegmentIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next appropriate value to be used
+        for mplsOutSegmentIndex when creating entries in the
+        mplsOutSegmentTable. If the number of unassigned entries is
+        exhausted, this object will take on the value of 0. To obtain
+        the mplsOutSegmentIndex value for a new entry, the manager
+        must first issue a management protocol retrieval operation to
+        obtain the current value of this object. The agent should
+        modify the value to reflect the next unassigned index after
+        each retrieval operation. After a manager retrieves a value
+        the agent will determine through its local policy when this
+        index value will be made available for reuse."
+   ::= { mplsLsrObjects 6 }
+
+mplsOutSegmentIndexNextEntry  OBJECT-TYPE
+   SYNTAX        MplsOutSegmentIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        mplsOutSegmentIndex for a specific Label Manager entity.
+        This MIB table is indexed by the PRVT-LMGR entity Index."
+
+   INDEX   { prvtlmgrLsrEntityLsrIndex }
+      ::= { mplsOutSegmentIndexNextTable 1 }
+
+MplsOutSegmentIndexNextEntry ::= SEQUENCE {
+      mplsOutSegmentIndexNext                   Integer32
+    }
+
+mplsOutSegmentIndexNext OBJECT-TYPE
+   SYNTAX        Integer32 (0..2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next available value to
+        be used for mplsOutSegmentIndex when creating entries
+        in the mplsOutSegmentTable.
+
+        The special value of 0 indicates that no new entries
+        can be created in this table.
+
+        Agents not allowing managers to create entries
+        in this table MUST set this object to this special
+        value."
+   ::= { mplsOutSegmentIndexNextEntry 2 }
+
+-- End of mplsOutSegmentIndexNextTable
+
+-- out-segment table.
+
+mplsOutSegmentTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsOutSegmentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains a representation of the outgoing
+        segments from an LSR.  An entry in this table represents
+        one outgoing segment. An entry can be created by a network
+        administrator or an SNMP agent, or an MPLS signaling
+        protocol. The object mplsOutSegmentOwner indicates the
+        creator of this entry."
+   ::= { mplsLsrObjects 7 }
+
+mplsOutSegmentEntry  OBJECT-TYPE
+   SYNTAX        MplsOutSegmentEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents one outgoing
+        segment.  An entry can be created by a network
+        administrator, an SNMP agent, or an MPLS signaling
+        protocol.  The object mplsOutSegmentOwner indicates
+        the creator of this entry.The value of
+        mplsOutSegmentRowStatus cannot be active(1) unless
+        the ifTable entry corresponding to
+        mplsOutSegmentInterface exists.
+
+        Note that the indexing of this table uses a single,
+        arbitrary index (mplsOutSegmentIndex) to indicate
+        which out-segment (i.e.: label) is being switched to
+        from which in-segment (i.e: label) or in-segments.
+        This is necessary because it is possible to have an
+        equal-cost multi-path situation where two identical
+        out-going labels are assigned to the same
+        cross-connect (i.e.: they go to two different neighboring
+        LSRs); thus, requiring two out-segments. In order to
+        preserve the uniqueness of the references
+        by the mplsXCEntry, an arbitrary integer must be used as
+        the index for this table.
+
+        PRIVATE EXTENSION. This MIB table is also
+        indexed by the PRVT-LMGR product index."
+   INDEX         { prvtlmgrLsrEntityLsrIndex, 
+                   mplsOutSegmentIndex }
+   ::= { mplsOutSegmentTable 1 }
+
+MplsOutSegmentEntry ::= SEQUENCE {
+  mplsOutSegmentIndex                MplsIndexType,
+  mplsOutSegmentInterface            InterfaceIndexOrZero,
+  mplsOutSegmentPushTopLabel         TruthValue,
+  mplsOutSegmentTopLabel             MplsLabel,
+  mplsOutSegmentTopLabelPtr          RowPointer,
+  mplsOutSegmentNextHopAddrType      InetAddressType,
+  mplsOutSegmentNextHopAddr          InetAddress,
+  mplsOutSegmentXCIndex              MplsIndexType,
+  mplsOutSegmentOwner                MplsOwner,
+  mplsOutSegmentTrafficParamPtr      RowPointer,
+  mplsOutSegmentRowStatus            RowStatus,
+  mplsOutSegmentStorageType          StorageType
+}
+
+mplsOutSegmentIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This value contains a unique index for this row.
+        While a value of 0 is not valid as an index for entries
+        in this table, it can be supplied as a valid value
+        to index the mplsXCTable to represent entries for
+        which no out-segment has been configured or
+        exists."
+   ::= { mplsOutSegmentEntry 2 }
+
+mplsOutSegmentInterface OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value must contain the interface index of the
+        outgoing interface. This object cannot be modified
+        if mplsOutSegmentRowStatus is active(1). The
+        mplsOutSegmentRowStatus cannot be set to active(1)
+        until this object is set to a value corresponding to
+        a valid ifEntry."
+   ::= { mplsOutSegmentEntry 3 }
+
+mplsOutSegmentPushTopLabel OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value indicates whether or not a top label
+        should be pushed onto the outgoing packet's label
+        stack.  The value of this variable MUST be set to
+        true(1) if the outgoing interface does not support
+        pop-and-go (and no label stack remains). For example,
+        on ATM interface, or if the segment represents a
+        tunnel origination.  Note that it is considered
+        an error in the case that mplsOutSegmentPushTopLabel
+        is set to false, but the cross-connect entry which
+        refers to this out-segment has a non-zero
+        mplsLabelStackIndex.  The LSR MUST ensure that this
+        situation does not happen. This object cannot be
+        modified if mplsOutSegmentRowStatus is active(1)."
+   DEFVAL { true }
+   ::= { mplsOutSegmentEntry 4 }
+
+mplsOutSegmentTopLabel OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "If mplsOutSegmentPushTopLabel is true then this
+        represents the label that should be pushed onto the
+        top of the outgoing packet's label stack. Otherwise
+        this value SHOULD be set to 0 by the management
+        station and MUST be ignored by the agent. This
+        object cannot be modified if mplsOutSegmentRowStatus
+        is active(1)."
+   DEFVAL { 0 }
+   ::= { mplsOutSegmentEntry 5 }
+
+mplsOutSegmentTopLabelPtr OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "If the label for this segment cannot be represented
+        fully within the mplsOutSegmentLabel object,
+        this object MUST point to the first accessible
+        column of a conceptual row in an external table containing
+        the label.  In this case, the mplsOutSegmentTopLabel
+        object SHOULD be set to 0 and ignored. This object
+        MUST be set to zeroDotZero otherwise.
+
+        In the this implementation, this object points at an entry in
+        the gmplsLabelTable.  Configuration of static LSPs using big
+        labels is not currently supported by PRVT-LMGR, and so the
+        gmplsLabelTable and this object are read-only."
+   DEFVAL { zeroDotZero }
+   ::= { mplsOutSegmentEntry 6 }
+
+mplsOutSegmentNextHopAddrType OBJECT-TYPE
+   SYNTAX        InetAddressType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Indicates the next hop Internet address type.
+        Only values unknown(0), ipv4(1) or ipv6(2)
+        have to be supported.
+
+        A value of unknown(0) is allowed only when
+        the outgoing interface is of type point-to-point.
+        If any other unsupported values are attempted in a set
+        operation, the agent MUST return an inconsistentValue
+        error."
+   REFERENCE
+       "See RFC3291."
+   ::= { mplsOutSegmentEntry 7 }
+
+mplsOutSegmentNextHopAddr OBJECT-TYPE
+   SYNTAX        InetAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The internet address of the next hop. The type of
+        this address is determined by the value of the
+        mplslOutSegmentNextHopAddrType object.
+
+        This object cannot be modified if
+        mplsOutSegmentRowStatus is active(1)."
+   ::= { mplsOutSegmentEntry 8 }
+
+mplsOutSegmentXCIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Index into mplsXCTable which identifies which cross-
+        connect entry this segment is part of.  A value of
+        zero indicates that this entry is not referred to by
+        any cross-connect entry.  When a cross-connect entry
+        is created which this out-segment is a part of, this
+        object is automatically updated to reflect the value
+        of mplsXCIndex of that cross-connect entry."
+   DEFVAL        { 0 }
+   ::= { mplsOutSegmentEntry 9 }
+
+mplsOutSegmentOwner OBJECT-TYPE
+   SYNTAX        MplsOwner
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Denotes the entity which created and is responsible
+        for managing this segment."
+   ::= { mplsOutSegmentEntry 10 }
+
+mplsOutSegmentTrafficParamPtr OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "This variable represents a pointer to the traffic
+      parameter specification for this out-segment.  This
+      value may point at an entry in the
+      mplsTrafficParamTable to indicate which
+      mplsTrafficParamEntry is to be assigned to this
+      segment.  This value may optionally point at an
+      externally defined traffic parameter specification
+      table.  A value of zeroDotZero indicates best-effort
+      treatment.  By having the same value of this object,
+      two or more segments can indicate resource sharing
+      of such things as LSP queue space, etc.
+
+      This object cannot be modified if
+      mplsOutSegmentRowStatus is active(1).
+      For entries in this table that
+      are preserved after a re-boot, the agent MUST ensure
+      that their integrity be preserved, or this object should
+      be set to 0.0 if it cannot.
+
+      In this implementation, the object must point at an
+      entry in the mplsTrafficParamTable."
+   DEFVAL { zeroDotZero }
+   ::= { mplsOutSegmentEntry 11 }
+
+mplsOutSegmentRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For creating, modifying, and deleting this row.
+        When a row in this table has a row in the active(1)
+        state, no objects in this row can be modified
+        except the mplsOutSegmentRowStatus or
+        mplsOutSegmentStorageType."
+   ::= { mplsOutSegmentEntry 12 }
+
+mplsOutSegmentStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object. The agent MUST ensure that this object's value
+        remains consistent with the associated mplsXCEntry.
+        Conceptual rows having the value 'permanent'
+        need not allow write-access to any columnar
+        objects in the row."
+   DEFVAL        { volatile }
+   ::= { mplsOutSegmentEntry 13 }
+
+
+-- End of mplsOutSegmentTable
+
+-- Cross-connect table.
+
+-- Private EXTENSION.  The mplsXcIndexNext object is
+-- implemented as a row in a table to allow for multiple instances of
+-- PRVT-LMGR entities within a managed node.
+
+mplsXCIndexNextTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsXCIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next appropriate value to be used
+        for mplsXCIndex when creating entries in the mplsXCTable.
+        If the number of unassigned entries is exhausted, this
+        object will take on the value of 0. To obtain the mplsXCIndex
+        value for a new entry, the manager must first issue a
+        management protocol retrieval operation to obtain the
+        current value of this object. The agent should modify the
+        value to reflect the next unassigned index after each
+        retrieval operation. After a manager retrieves a value the
+        agent will determine through its local policy when this
+        index value will be made available for reuse."
+   ::= { mplsLsrObjects 9 }
+
+mplsXCIndexNextEntry  OBJECT-TYPE
+   SYNTAX        MplsXCIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        mplsXcIndex for a specific Label Manager entity.
+        This MIB table is indexed by the PRVT-LMGR entity Index."
+
+   INDEX   { prvtlmgrLsrEntityLsrIndex }
+      ::= { mplsXCIndexNextTable 1 }
+
+MplsXCIndexNextEntry ::= SEQUENCE {
+      mplsXCIndexNext                   Integer32
+    }
+
+mplsXCIndexNext OBJECT-TYPE
+   SYNTAX        Integer32 (0..2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next available value to
+        be used for mplsXCIndex when creating entries in
+        the mplsXCTable. A special value of the zero length
+        string indicates that no more new entries can be created
+        in the relevant table.  Agents not allowing managers
+        to create entries in this table MUST set this value
+        to the zero length string."
+   ::= { mplsXCIndexNextEntry 2 }
+
+-- Cross-connect table.
+
+mplsXCTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsXCEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies information for switching
+        between LSP segments.  It supports point-to-point,
+        point-to-multipoint and multipoint-to-point
+        connections.  mplsLabelStackTable specifies the
+        label stack information for a cross-connect LSR and
+        is referred to from mplsXCTable."
+   ::= { mplsLsrObjects 10 }
+
+mplsXCEntry  OBJECT-TYPE
+   SYNTAX        MplsXCEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "A row in this table represents one cross-connect
+        entry.  It is indexed by the following objects:
+
+        - cross-connect index mplsXCIndex that uniquely
+          identifies a group of cross-connect entries
+
+        - in-segment index, mplsXCInSegmentIndex
+
+        - out-segment index, mplsXCOutSegmentIndex.
+
+       LSPs originating at this LSR:
+        These are represented by using the special
+        value of mplsXCInSegmentIndex set to the
+        value 0. In this case the mplsXCOutSegmentIndex
+        MUST not the value 0.
+
+       LSPs terminating at this LSR:
+       These are represented by using the special value
+        mplsXCOutSegmentIndex set to the value 0.
+
+        An entry can be created by a network administrator
+        or by an SNMP agent as instructed by an MPLS
+        signaling protocol.
+
+        PRIVATE EXTENSION. This MIB table is also
+        indexed by the PRVT-LMGR product index."
+   INDEX  { prvtlmgrLsrEntityLsrIndex, 
+            mplsXCIndex,
+            mplsXCInSegmentIndex,
+            mplsXCOutSegmentIndex }
+
+      ::= { mplsXCTable 1 }
+
+MplsXCEntry ::= SEQUENCE {
+      mplsXCIndex                  MplsIndexType,
+      mplsXCInSegmentIndex         MplsIndexType,
+      mplsXCOutSegmentIndex        MplsIndexType,
+      mplsXCLspId                 MplsLSPID,
+      mplsXCLabelStackIndex        MplsIndexType,
+      mplsXCOwner                 MplsOwner,
+      mplsXCRowStatus             RowStatus,
+      mplsXCStorageType           StorageType,
+      mplsXCAdminStatus           INTEGER,
+      mplsXCOperStatus            INTEGER,
+      mplsXCUserData              OCTET STRING
+   }
+
+mplsXCIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Primary index for the conceptual row identifying a
+        group of cross-connect segments.
+
+        The value 0 is an invalid index."
+   ::= { mplsXCEntry 2 }
+
+mplsXCInSegmentIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Incoming label index.
+
+        If this object is set to the value 0, this indicates
+        a special case outlined in the table's description above.
+
+        In this case no corresponding mplsInSegmentEntry
+        shall exist."
+   ::= { mplsXCEntry 3 }
+
+mplsXCOutSegmentIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Index of out-segment for LSPs not terminating on
+        this LSR if not set to the value 0.  If the segment
+        identified by this entry is terminating, then this
+        object MUST be set to the value 0 to indicate
+        that no corresponding mplsOutSegmentEntry shall exist."
+   ::= { mplsXCEntry 4 }
+
+mplsXCLspId OBJECT-TYPE
+   SYNTAX        MplsLSPID
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This value identifies the label switched path that
+        this cross-connect entry belongs to. This object
+        cannot be modified if mplsXCRowStatus is active(1)
+        except for this object."
+   ::= { mplsXCEntry 5 }
+
+mplsXCLabelStackIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Primary index into mplsLabelStackTable identifying a
+        stack of labels to be pushed beneath the top label.
+        Note that the top label identified by the out-
+        segment ensures that all the components of a
+        multipoint-to-point connection have the same
+        outgoing label.  A value of 0 indicates that no
+        labels are to be stacked beneath the top label.
+        This object cannot be modified if mplsXCRowStatus is
+        active(1)."
+   ::= { mplsXCEntry 6 }
+
+mplsXCOwner OBJECT-TYPE
+   SYNTAX    MplsOwner
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Denotes the entity that created and is responsible
+        for managing this cross-connect."
+   ::= { mplsXCEntry 7 }
+
+mplsXCRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For creating, modifying, and deleting this row.
+        When a row in this table has a row in the active(1)
+        state, no objects in this row except this object
+        and the mplsXCStorageType can be modified. "
+   ::= { mplsXCEntry 8 }
+
+mplsXCStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object. The agent MUST ensure that the associated in
+        and out segments also have the same StorageType value
+        and are restored consistently upon system restart.
+        This value SHOULD be set to permanent(4) if created
+        as a result of a static LSP configuration.
+
+        Conceptual rows having the value 'permanent'
+        need not allow write-access to any columnar
+        objects in the row."
+   DEFVAL        { volatile }
+   ::= { mplsXCEntry 9 }
+
+mplsXCAdminStatus OBJECT-TYPE
+   SYNTAX   INTEGER {
+                up(1),     -- ready to pass packets
+                down(2),
+                testing(3) -- in some test mode
+                }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The desired operational status of this segment."
+   DEFVAL { up }
+   ::= { mplsXCEntry 10 }
+
+mplsXCOperStatus OBJECT-TYPE
+   SYNTAX   INTEGER {
+         up(1),            -- ready to pass packets
+         down(2),
+         testing(3),       -- in some test mode
+         unknown(4),       -- status cannot be determined
+                           -- for some reason.
+         dormant(5),
+         notPresent(6),    -- some component is missing
+         lowerLayerDown(7) -- down due to the state of
+                           -- lower layer interfaces
+      }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The actual operational status of this cross-connect."
+   ::= { mplsXCEntry 11 }
+
+mplsXCUserData OBJECT-TYPE
+   SYNTAX        OCTET STRING (SIZE (0..16))
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "User defined information for this cross-connect. This
+        information will be passed over the LSI on the
+        ATG_LSI_CONNECT_LSP_XC request from Label Manager as
+        xc_user_data. Note that if any user data is specified here, its
+        length must not be greater than the xc_user_data_size that was
+        specified on the ATG_LSI_REGISTER response to Label Manager."
+   ::= { mplsXCEntry 12 }
+
+-- End of mplsXCTable
+
+
+-- Label stack table.
+
+-- Private EXTENSION.  The mplsLabelStackIndexNext object is
+-- implemented as a row in a table to allow for multiple instances of
+-- PRVT-LMGR entities within a managed node.
+
+mplsLabelStackIndexNextTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsLabelStackIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next appropriate value to be used
+        for mplsLabelStackIndex when creating entries in the
+        mplsLabelStackTable. If the number of unassigned entries is
+        exhausted, this object will take on the value of 0. To obtain
+        the mplsLabelStackIndex value for a new entry, the manager
+        must first issue a management protocol retrieval operation to
+        obtain the current value of this object. The agent should
+        modify the value to reflect the next unassigned index after
+        each retrieval operation. After a manager retrieves a value
+        the agent will determine through its local policy when this
+        index value will be made available for reuse."
+   ::= { mplsLsrObjects 11 }
+
+mplsLabelStackIndexNextEntry  OBJECT-TYPE
+   SYNTAX        MplsLabelStackIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        mplsLabelStackIndex for a specific Label Manager entity.
+        This MIB table is indexed by the PRVT-LMGR entity Index."
+
+   INDEX   { prvtlmgrLsrEntityLsrIndex }
+      ::= { mplsLabelStackIndexNextTable 1 }
+
+MplsLabelStackIndexNextEntry ::= SEQUENCE {
+      mplsLabelStackIndexNext              Integer32
+    }
+
+mplsLabelStackIndexNext  OBJECT-TYPE
+   SYNTAX        Integer32 (0..2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next available value to
+        be used for mplsLabelStackIndex when creating entries
+        in the mplsLabelStackTable.
+        The special value 0 indicates that no more new
+        entries can be created in the relevant table.  Agents
+        not allowing managers to create entries in this table
+        MUST set this value to 0."
+::= { mplsLabelStackIndexNextEntry 2 }
+
+mplsLabelStackTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsLabelStackEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the label stack to be pushed
+        onto a packet, beneath the top label.  Entries into
+        this table are referred to from mplsXCTable.  An entry in
+        this table represents one label which is to be pushed onto
+        an outgoing packet, beneath the top label. An entry can be
+        created by a network administrator or by an SNMP agent as
+        instructed by an MPLS signaling protocol."
+   ::= { mplsLsrObjects 13 }
+
+mplsLabelStackEntry OBJECT-TYPE
+   SYNTAX        MplsLabelStackEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents one label which is
+        to be pushed onto an outgoing packet, beneath the
+        top label.  An entry can be created by a network
+        administrator or by an SNMP agent as instructed by
+        an MPLS signaling protocol.
+
+        PRIVATE EXTENSION. This MIB table is also
+        indexed by the PRVT-LMGR product index."
+   INDEX         { prvtlmgrLsrEntityLsrIndex, 
+                    mplsLabelStackIndex,
+                    mplsLabelStackLabelIndex }
+      ::= { mplsLabelStackTable 1 }
+
+MplsLabelStackEntry ::= SEQUENCE {
+      mplsLabelStackIndex             MplsIndexType,
+      mplsLabelStackLabelIndex        Unsigned32,
+      mplsLabelStackLabel             MplsLabel,
+      mplsLabelStackLabelPtr          RowPointer,
+      mplsLabelStackRowStatus         RowStatus,
+      mplsLabelStackStorageType       StorageType
+   }
+
+mplsLabelStackIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Primary index for this row identifying a stack of
+        labels to be pushed on an outgoing packet, beneath
+        the top label.
+
+        An index of 0 MUST not be used."
+   ::= { mplsLabelStackEntry 2 }
+
+mplsLabelStackLabelIndex OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Secondary index for this row identifying one label
+        of the stack.  Note that an entry with a smaller
+        mplsLabelStackLabelIndex would refer to a label
+        higher up the label stack and would be popped at a
+        downstream LSR before a label represented by a
+        higher mplsLabelStackLabelIndex at a downstream
+        LSR."
+   ::= { mplsLabelStackEntry 3 }
+
+mplsLabelStackLabel OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The label to pushed."
+   ::= { mplsLabelStackEntry 4 }
+
+mplsLabelStackLabelPtr OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "If the label for this segment cannot be represented
+        fully within the mplsLabelStackLabel object,
+        this object MUST point to the first accessible
+        column of a conceptual row in an external table containing
+        the label.  In this case, the mplsLabelStackLabel
+        object SHOULD be set to 0 and ignored. This object
+        MUST be set to zeroDotZero otherwise.
+
+        In the this implementation, the object points at an entry in
+        the gmplsLabelTable.  Configuration of static LSPs using big
+        labels is not currently supported by PRVT-LMGR, and so the
+        gmplsLabelTable and this object are read-only."
+   DEFVAL { zeroDotZero }
+   ::= { mplsLabelStackEntry 5 }
+
+mplsLabelStackRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For creating, modifying, and deleting this row.
+        When a row in this table has a row in the active(1)
+        state, no objects in this row except this object
+        and the mplsLabelStackStorageType can be modified."
+   ::= { mplsLabelStackEntry 6 }
+
+mplsLabelStackStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This variable indicates the storage type for this
+        object. This object cannot be modified if
+        mplsLabelStackRowStatus is active(1).
+        No objects are required to be writable for
+        rows in this table with this object set to
+        permanent(4).
+
+        The agent MUST ensure that all related entries
+        in this table retain the same value for this
+        object.  Agents MUST ensure that the storage type
+        for all entries related to a particular mplsXCEntry
+        retain the same value for this object as the
+        mplsXCEntry's StorageType."
+   DEFVAL { volatile }
+   ::= { mplsLabelStackEntry 7 }
+
+-- End of mplsLabelStackTable
+
+-- Traffic Parameter table.
+
+-- Private EXTENSION.  The mplsTrafficParamIndexNext object is
+-- implemented as a row in a table to allow for multiple instances of
+-- PRVT-LMGR entities within a managed node.
+
+mplsTrafficParamIndexNextTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTrafficParamIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next appropriate value to be used for
+        mplsTrafficParamIndex when creating entries in the
+        mplsTrafficParamTable. If the number of unassigned entries is
+        exhausted, this object will take on the value of 0. To obtain
+        the mplsTrafficParamIndex value for a new entry, the manager
+        must first issue a management protocol retrieval operation to
+        obtain the current value of this object. The agent should
+        modify the value to reflect the next unassigned index after
+        each retrieval operation. After a manager retrieves a value
+        the agent will determine through its local policy when this
+        index value will be made available for reuse."
+   ::= { mplsLsrObjects 16 }
+
+mplsTrafficParamIndexNextEntry  OBJECT-TYPE
+   SYNTAX        MplsTrafficParamIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        mplsTrafficParamIndex for a specific Label Manager entity.
+        This MIB table is indexed by the PRVT-LMGR entity Index."
+
+   INDEX   { prvtlmgrLsrEntityLsrIndex }
+      ::= { mplsTrafficParamIndexNextTable 1 }
+
+MplsTrafficParamIndexNextEntry ::= SEQUENCE {
+      mplsTrafficParamIndexNext              Integer32
+    }
+
+mplsTrafficParamIndexNext OBJECT-TYPE
+   SYNTAX        Integer32 (0..2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The next available index value for the
+        mplsTrafficParamTable."
+   ::= { mplsTrafficParamIndexNextEntry 2 }
+
+mplsTrafficParamTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsTrafficParamEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the Traffic Parameter objects
+        for in and out-segments.  An entry in this table
+        represents the TrafficParam objects for one or more
+        in or out segments. A single entry can be pointed to
+        by multiple segments indicating resource sharing."
+   ::= { mplsLsrObjects 17 }
+
+mplsTrafficParamEntry OBJECT-TYPE
+   SYNTAX        MplsTrafficParamEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the TrafficParam
+        objects for one or more in or out segments.  A
+        single entry can be pointed to by multiple segments
+        indicating resource sharing.
+
+        PRIVATE EXTENSION. This MIB table is also
+        indexed by the PRVT-LMGR product index."
+   INDEX         { prvtlmgrLsrEntityLsrIndex, mplsTrafficParamIndex }
+      ::= { mplsTrafficParamTable 1 }
+
+MplsTrafficParamEntry ::= SEQUENCE {
+      mplsTrafficParamIndex           Integer32,
+      mplsTrafficParamMaxRate         MplsBitRate,
+      mplsTrafficParamMeanRate        MplsBitRate,
+      mplsTrafficParamMaxBurstSize    MplsBurstSize,
+      mplsTrafficParamRowStatus       RowStatus,
+      mplsTrafficParamStorageType     StorageType
+   }
+
+mplsTrafficParamIndex OBJECT-TYPE
+   SYNTAX        Integer32 (1..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "Uniquely identifies this row of the table.  Note
+        that zero represents an invalid index."
+   ::= { mplsTrafficParamEntry 2 }
+
+mplsTrafficParamMaxRate OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "kilobits per second"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Maximum rate in kilobits/second."
+   ::= { mplsTrafficParamEntry 3 }
+
+mplsTrafficParamMeanRate OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "kilobits per second"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Mean rate in kilobits/second."
+   ::= { mplsTrafficParamEntry 4 }
+
+mplsTrafficParamMaxBurstSize OBJECT-TYPE
+   SYNTAX        MplsBurstSize
+   UNITS         "bytes"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Maximum burst size in bytes."
+   ::= { mplsTrafficParamEntry 5 }
+
+mplsTrafficParamRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "For creating, modifying, and deleting this row."
+   ::= { mplsTrafficParamEntry 6 }
+
+mplsTrafficParamStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The storage type for this object."
+   DEFVAL { volatile }
+   ::= { mplsTrafficParamEntry 7 }
+
+-- End of mplsTrafficParamTable
+
+-- Begin mplsInSegmentMapTable
+
+mplsInSegmentMapTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF MplsInSegmentMapEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table specifies the mapping from the
+        mplsInSegmentIndex to the corresponding
+        mplsInSegmentInterface and mplsInSegmentLabel
+        objects. The purpose of this table is to
+        provide the manager with an alternative
+        means by which to locate in-segments."
+   ::= { mplsLsrObjects 14 }
+
+mplsInSegmentMapEntry OBJECT-TYPE
+   SYNTAX        MplsInSegmentMapEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents one interface
+        and incoming label pair.
+
+        In cases where the label cannot fit into the
+        mplsInSegmentLabel object, the mplsInSegmentLabelPtr
+        will indicate this by being set to the first accessible
+        column in the appropriate extension table's row,
+        and the mplsInSegmentLabel SHOULD be set to 0.
+        In all other cases when the label is
+        represented within the mplsInSegmentLabel object, the
+        mplsInSegmentLabelPtr MUST be 0.0.
+
+        Implementors need to be aware that if the value of
+        the mplsInSegmentMapLabelPtrIndex (an OID) has more
+        that 111 sub-identifiers, then OIDs of column
+        instances in this table will have more than 128
+        sub-identifiers and cannot be accessed using SNMPv1,
+        SNMPv2c, or SNMPv3."
+
+   INDEX { prvtlmgrLsrEntityLsrIndex,
+           mplsInSegmentMapInterface,
+           mplsInSegmentMapLabel,
+           mplsInSegmentMapLabelPtrIndex }
+   ::= { mplsInSegmentMapTable 1 }
+
+MplsInSegmentMapEntry ::= SEQUENCE {
+      mplsInSegmentMapInterface      InterfaceIndexOrZero,
+      mplsInSegmentMapLabel          MplsLabel,
+      mplsInSegmentMapLabelPtrIndex  RowPointer,
+      mplsInSegmentMapIndex          MplsIndexType
+   }
+
+mplsInSegmentMapInterface OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This index contains the same value as the
+        mplsInSegmentIndex in the mplsInSegmentTable."
+   ::= { mplsInSegmentMapEntry 2 }
+
+mplsInSegmentMapLabel OBJECT-TYPE
+   SYNTAX        MplsLabel
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This index contains the same value as the
+        mplsInSegmentLabel in the mplsInSegmentTable."
+   ::= { mplsInSegmentMapEntry 3 }
+
+mplsInSegmentMapLabelPtrIndex OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This index contains the same value as the
+        mplsInSegmentLabelPtr.
+
+        If the label for the InSegment cannot be represented
+        fully within the mplsInSegmentLabel object,
+        this index MUST point to the first accessible
+        column of a conceptual row in an external table containing
+        the label.  In this case, the mplsInSegmentTopLabel
+        object SHOULD be set to 0 and ignored. This object MUST
+        be set to zeroDotZero otherwise.
+
+        In the this implementation, the object points at an entry in
+        the gmplsLabelTable."
+   ::= { mplsInSegmentMapEntry 4 }
+
+mplsInSegmentMapIndex OBJECT-TYPE
+   SYNTAX        MplsIndexType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The mplsInSegmentIndex that corresponds
+        to the mplsInSegmentInterface and
+        mplsInSegmentLabel, or the mplsInSegmentInterface
+        and mplsInSegmentLabelPtr, if applicable.
+
+        The value 0 MUST not be returned."
+   ::= { mplsInSegmentMapEntry 5 }
+
+-- End mplsInSegmentMapTable
+
+-- Notification Configuration
+
+-- mplsNotificationEnableTable
+
+prvtlmgrTrapEnableTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PrvtlmgrTrapEnableEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "The mplsXCTrapEnable Scalar allows a manager to
+        enable or disable TRAPs."
+   ::= { mplsLsrObjects 15 }
+
+prvtlmgrTrapEnableEntry  OBJECT-TYPE
+   SYNTAX        PrvtlmgrTrapEnableEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "The mplsXCTrapEnable Scalar allows a manager to
+        enable or disable TRAPs.
+
+        PRIVATE EXTENSION. This MIB table is also
+        indexed by the LMGR product Index."
+   INDEX         { prvtlmgrLsrEntityLsrIndex }
+   ::= { prvtlmgrTrapEnableTable 1 }
+
+PrvtlmgrTrapEnableEntry ::= SEQUENCE {
+  mplsXCTrapEnable                  TruthValue
+}
+
+mplsXCTrapEnable OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+       "If this object is set to true(1), then it enables
+        the emission of mplsXCUp and mplsXCDown
+        notifications; otherwise these notifications are not
+        emitted."
+   REFERENCE
+       "See also RFC3413 for explanation that
+        notifications are under the ultimate control of the
+        MIB module in this document."
+   DEFVAL { false }
+   ::= { prvtlmgrTrapEnableEntry 2 }
+
+-- End of prvtlmgrTrapEnableTable
+
+-- Cross-connect.
+
+mplsXCUp NOTIFICATION-TYPE
+   OBJECTS     { mplsXCOperStatus,  -- start of range
+                 mplsXCOperStatus   -- end of range
+   }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when the
+        mplsXCOperStatus object for one or more contiguous
+        entries in mplsXCTable are about to enter the up(1)
+        state from some other state. The included values of
+        mplsXCOperStatus MUST both be set equal to this
+        new state (i.e: up(1)).  The two instances of
+        mplsXCOperStatus in this notification indicate the range
+        of indexes that are affected.  Note that all the indexes
+        of the two ends of the range can be derived from the
+        instance identifiers of these two objects.  For
+        cases where a contiguous range of cross-connects
+        have transitioned into the up(1) state at roughly
+        the same time, the device SHOULD issue a single
+        notification for each range of contiguous indexes in
+        an effort to minimize the emission of a large number
+        of notifications.  If a notification has to be
+        issued for just a single cross-connect entry, then
+        the instance identifier (and values) of the two
+        mplsXCOperStatus objects MUST be the identical."
+   ::= { mplsLsrNotifyPrefix 1 }
+
+mplsXCDown NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsXCOperStatus,  -- start of range
+      mplsXCOperStatus   -- end of range
+   }
+   STATUS      current
+   DESCRIPTION
+       "This notification is generated when the
+        mplsXCOperStatus object for one or more contiguous
+        entries in mplsXCTable are about to enter the
+        down(2) state from some other state. The included values
+        of mplsXCOperStatus MUST both be set equal to this
+        down(2) state.  The two instances of mplsXCOperStatus
+        in this notification indicate the range of indexes
+        that are affected.  Note that all the indexes of the
+        two ends of the range can be derived from the
+        instance identifiers of these two objects.  For
+        cases where a contiguous range of cross-connects
+        have transitioned into the down(2) state at roughly
+        the same time, the device SHOULD issue a single
+        notification for each range of contiguous indexes in
+        an effort to minimize the emission of a large number
+        of notifications.  If a notification has to be
+        issued for just a single cross-connect entry, then
+        the instance identifier (and values) of the two
+        mplsXCOperStatus objects MUST be identical."
+   ::= { mplsLsrNotifyPrefix 2 }
+
+-- End of notifications.
+
+-- Module compliance.
+
+mplsLsrGroups
+   OBJECT IDENTIFIER ::= { mplsLsrConformance 1 }
+
+mplsLsrCompliances
+   OBJECT IDENTIFIER ::= { mplsLsrConformance 2 }
+
+-- Compliance requirement for fully compliant implementations.
+
+mplsLsrModuleFullCompliance MODULE-COMPLIANCE
+  STATUS  current
+   DESCRIPTION "Compliance statement for agents that provide full
+                support for MPLS-LSR-MIB. Such devices can
+                then be monitored and also be configured using
+                this MIB module."
+
+   MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
+   MANDATORY-GROUPS {
+      ifGeneralInformationGroup,
+      ifCounterDiscontinuityGroup
+   }
+
+   MODULE -- This module.
+   MANDATORY-GROUPS {
+         mplsInterfaceGroup,
+         mplsInSegmentGroup,
+         mplsOutSegmentGroup,
+         mplsXCGroup,
+         mplsLsrTrafficParamGroup
+   }
+
+   GROUP        mplsLabelStackGroup
+   DESCRIPTION "This group is only mandatory for LSRs that wish to
+                support the modification of LSP label stacks.
+               "
+
+   GROUP        mplsLsrNotificationGroup
+   DESCRIPTION "This group is only mandatory for those implementations
+                which can efficiently implement the notifications
+                contained in this group."
+
+   OBJECT       mplsInSegmentRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is
+                not required."
+
+   OBJECT       mplsOutSegmentNextHopAddrType
+   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+   DESCRIPTION "Only unknown(0), ipv4(1) and ipv6(2) support
+                is required."
+
+   OBJECT       mplsOutSegmentNextHopAddr
+   SYNTAX       InetAddress (SIZE(0|4|16))
+   DESCRIPTION "An implementation is only required to support
+                unknown(0), ipv4(1) and ipv6(2) sizes."
+
+   OBJECT       mplsOutSegmentRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is not
+                required."
+
+   OBJECT       mplsLabelStackRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is not
+                required."
+
+   OBJECT       mplsXCRowStatus
+   SYNTAX       RowStatus { active(1), notInService(2) }
+   WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                            createAndGo(4), destroy(6)
+                          }
+   DESCRIPTION "Support for createAndWait and notReady is not
+                required."
+
+   ::= { mplsLsrCompliances 1 }
+
+-- Compliance requirement for read-only implementations.
+
+mplsLsrModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS       current
+   DESCRIPTION "Compliance requirement for implementations that only
+                provide read-only support for MPLS-LSR-MIB. Such
+                devices can then be monitored but cannot be configured
+                using this MIB module.
+               "
+
+   MODULE IF-MIB -- The interfaces Group MIB, RFC 2863
+   MANDATORY-GROUPS {
+      ifGeneralInformationGroup,
+      ifCounterDiscontinuityGroup
+   }
+
+   MODULE -- This module
+   MANDATORY-GROUPS {
+         mplsInterfaceGroup,
+         mplsInSegmentGroup,
+         mplsOutSegmentGroup,
+         mplsXCGroup,
+         mplsLsrTrafficParamGroup
+     }
+
+   GROUP        mplsLabelStackGroup
+   DESCRIPTION "This group is only mandatory for LSRs that wish to
+                support the modification of LSP label stacks.
+               "
+
+  GROUP mplsLsrNotificationGroup
+   DESCRIPTION "This group is only mandatory for those implementations
+                which can efficiently implement the notifications
+                contained in this group.
+               "
+
+   -- mplsInSegmentTable
+   OBJECT       mplsInSegmentLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsInSegmentLabelPtr
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsInSegmentNPop
+   SYNTAX       Integer32 (1..1)
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  This object
+                SHOULD be set to 1 if it is read-only.
+               "
+
+   OBJECT       mplsInSegmentAddrFamily
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  A value of other(0)
+                should be supported because there may be cases where
+                the agent may not know about or support any address
+                types.
+               "
+
+   OBJECT       mplsInSegmentRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsInSegmentStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   -- mplsOutSegmentTable
+   OBJECT       mplsOutSegmentInterface
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentPushTopLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentTopLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentTopLabelPtr
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentNextHopAddrType
+   SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required.  Only unknown(0),
+                ipv4(1) and ipv6(2) support is required.
+               "
+
+   OBJECT       mplsOutSegmentNextHopAddr
+   SYNTAX       InetAddress (SIZE(0|4|16))
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required. An implementation is
+                only required to support unknown(0), ipv4(1) and
+                ipv6(2) sizes."
+
+   OBJECT       mplsOutSegmentRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsOutSegmentStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   -- mplsXCTable
+   OBJECT       mplsXCLabelStackIndex
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsXCAdminStatus
+   MIN-ACCESS   read-only
+   DESCRIPTION "Read only support is required."
+
+   OBJECT       mplsXCRowStatus
+   SYNTAX       RowStatus { active(1) }
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsXCStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsLabelStackLabel
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsLabelStackLabelPtr
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsLabelStackRowStatus
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   OBJECT       mplsLabelStackStorageType
+   MIN-ACCESS   read-only
+   DESCRIPTION "Write access is not required."
+
+   ::= { mplsLsrCompliances 2 }
+
+-- Units of conformance.
+
+mplsInterfaceGroup OBJECT-GROUP
+   OBJECTS {
+      mplsInterfaceLabelMinIn,
+      mplsInterfaceLabelMaxIn,
+      mplsInterfaceLabelMinOut,
+      mplsInterfaceLabelMaxOut,
+      mplsInterfaceTotalBandwidth,
+      mplsInterfaceAvailableBandwidth,
+      mplsInterfaceLabelParticipType,
+      mplsInterfaceSwitchMngedLblSpace
+   }
+    STATUS  current
+    DESCRIPTION
+          "Collection of objects needed for MPLS interface
+           and interface performance information."
+   ::= { mplsLsrGroups 1 }
+
+mplsInSegmentGroup  OBJECT-GROUP
+   OBJECTS {
+      mplsInSegmentIndexNext,
+      mplsInSegmentInterface,
+      mplsInSegmentLabel,
+      mplsInSegmentLabelPtr,
+      mplsInSegmentNPop,
+      mplsInSegmentAddrFamily,
+      mplsInSegmentXCIndex,
+      mplsInSegmentOwner,
+      mplsInSegmentRowStatus,
+      mplsInSegmentStorageType,
+      mplsInSegmentTrafficParamPtr,
+      mplsInSegmentMapIndex
+   }
+    STATUS  current
+    DESCRIPTION
+          "Collection of objects needed to implement an in-
+           segment."
+   ::= { mplsLsrGroups 2 }
+
+mplsOutSegmentGroup  OBJECT-GROUP
+   OBJECTS {
+      mplsOutSegmentIndexNext,
+      mplsOutSegmentInterface,
+      mplsOutSegmentPushTopLabel,
+      mplsOutSegmentTopLabel,
+      mplsOutSegmentTopLabelPtr,
+      mplsOutSegmentNextHopAddrType,
+      mplsOutSegmentNextHopAddr,
+      mplsOutSegmentXCIndex,
+      mplsOutSegmentOwner,
+      mplsOutSegmentRowStatus,
+      mplsOutSegmentStorageType,
+      mplsOutSegmentTrafficParamPtr
+   }
+    STATUS  current
+    DESCRIPTION
+          "Collection of objects needed to implement an out-
+           segment."
+    ::= { mplsLsrGroups 3 }
+
+mplsXCGroup  OBJECT-GROUP
+   OBJECTS {
+      mplsXCIndexNext,
+      mplsXCLspId,
+      mplsXCLabelStackIndex,
+      mplsXCOwner,
+      mplsXCStorageType,
+      mplsXCAdminStatus,
+      mplsXCOperStatus,
+      mplsXCRowStatus,
+      mplsXCTrapEnable,
+      mplsXCUserData
+   }
+    STATUS  current
+    DESCRIPTION
+          "Collection of objects needed to implement a
+           cross-connect entry."
+   ::= { mplsLsrGroups 4 }
+
+mplsLabelStackGroup OBJECT-GROUP
+   OBJECTS {
+      mplsLabelStackLabel,
+      mplsLabelStackLabelPtr,
+      mplsLabelStackRowStatus,
+      mplsLabelStackStorageType,
+      mplsLabelStackIndexNext
+   }
+    STATUS  current
+    DESCRIPTION
+          "Objects needed to support label stacking."
+      ::= { mplsLsrGroups 8 }
+
+mplsLsrNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+      mplsXCUp,
+      mplsXCDown
+   }
+    STATUS  current
+    DESCRIPTION
+          "Set of notifications implemented in this
+           module."
+   ::= { mplsLsrGroups 9 }
+
+mplsLsrTrafficParamGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTrafficParamIndexNext,
+      mplsTrafficParamMaxRate,
+      mplsTrafficParamMeanRate,
+      mplsTrafficParamMaxBurstSize,
+      mplsTrafficParamRowStatus,
+      mplsTrafficParamStorageType
+    }
+    STATUS  current
+    DESCRIPTION
+           "Optional Traffic Param table objects."
+    ::= { mplsLsrGroups 10 }
+
+
+-- End of MPLS-LSR-MIB
+END
diff --git a/MIBS/telco-systems/binos/MPLS-TC-PRIV-STDEXT-MIB b/MIBS/telco-systems/binos/MPLS-TC-PRIV-STDEXT-MIB
new file mode 100644
index 0000000..aedbfb9
--- /dev/null
+++ b/MIBS/telco-systems/binos/MPLS-TC-PRIV-STDEXT-MIB
@@ -0,0 +1,667 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: MPLS-TC-PRIV-STDEXT-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+MPLS-TC-PRIV-STDEXT-MIB DEFINITIONS ::= BEGIN
+
+    IMPORTS
+
+       MODULE-IDENTITY,
+       Unsigned32, Integer32,
+       transmission           FROM SNMPv2-SMI            -- [RFC2578]
+
+       TEXTUAL-CONVENTION
+          FROM SNMPv2-TC;                                -- [RFC2579]
+
+    mplsTCPrivStdExtMIB MODULE-IDENTITY
+       LAST-UPDATED "200712060000Z"
+        ORGANIZATION "BATM Advanced Communication"
+       CONTACT-INFO
+        " BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+       DESCRIPTION
+           "Copyright (C) The Internet Society (2004). The
+           initial version of this MIB module was published
+           in RFC 3811. For full legal notices see the RFC
+           itself or see:
+           http://www.ietf.org/copyrights/ianamib.html
+
+           This MIB module defines TEXTUAL-CONVENTIONs
+           for concepts used in Multiprotocol Label
+           Switching (MPLS) networks."
+
+         -- revision history
+         REVISION     "200712060000Z"
+         DESCRIPTION
+         "Extended standard MIB with private TC"      
+
+       REVISION "200406030000Z" -- June 3, 2004
+       DESCRIPTION
+          "Initial version published as part of RFC 3811."
+
+        ::= { mplsStdMIB 1 }
+
+    mplsStdMIB OBJECT IDENTIFIER
+
+    ::= { transmission 166 }
+
+    MplsAtmVcIdentifier ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS  current
+       DESCRIPTION
+          "A Label Switching Router (LSR) that
+           creates LDP sessions on ATM interfaces
+           uses the VCI or VPI/VCI field to hold the
+           LDP Label.
+
+           VCI values MUST NOT be in the 0-31 range.
+           The values 0 to 31 are reserved for other uses
+           by the ITU and ATM Forum.  The value
+           of 32 can only be used for the Control VC,
+           although values greater than 32 could be
+           configured for the Control VC.
+
+           If a value from 0 to 31 is used for a VCI
+           the management entity controlling the LDP
+           subsystem should reject this with an
+           inconsistentValue error.  Also, if
+           the value of 32 is used for a VC which is
+           NOT the Control VC, this should
+           result in an inconsistentValue error."
+       REFERENCE
+          "MPLS using LDP and ATM VC Switching, RFC3035."
+       SYNTAX  Integer32 (32..65535)
+
+    MplsBitRate ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS      current
+       DESCRIPTION
+          "If the value of this object is greater than zero,
+           then this represents the bandwidth of this MPLS
+           interface (or Label Switched Path) in units of
+           '1,000 bits per second'.
+
+           The value, when greater than zero, represents the
+           bandwidth of this MPLS interface (rounded to the
+           nearest 1,000) in units of 1,000 bits per second.
+           If the bandwidth of the MPLS interface is between
+           ((n * 1000) - 500) and ((n * 1000) + 499), the value
+           of this object is n, such that n > 0.
+
+           If the value of this object is 0 (zero), this
+           means that the traffic over this MPLS interface is
+           considered to be best effort."
+       SYNTAX  Unsigned32 (0|1..4294967295)
+
+    MplsBurstSize ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "d"
+       STATUS      current
+       DESCRIPTION
+          "The number of octets of MPLS data that the stream
+           may send back-to-back without concern for policing.
+           The value of zero indicates that an implementation
+           does not support Burst Size."
+       SYNTAX  Unsigned32 (0..4294967295)
+
+    MplsExtendedTunnelId ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "A unique identifier for an MPLS Tunnel.  This may
+           represent an IPv4 address of the ingress or egress
+           LSR for the tunnel.  This value is derived from the
+           Extended Tunnel Id in RSVP or the Ingress Router ID
+           for CR-LDP."
+       REFERENCE
+          "RSVP-TE: Extensions to RSVP for LSP Tunnels,
+           [RFC3209].
+
+           Constraint-Based LSP Setup using LDP, [RFC3212]."
+       SYNTAX  Unsigned32(0..4294967295)
+
+    MplsLabel ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "This value represents an MPLS label as defined in
+           [RFC3031],  [RFC3032], [RFC3034], [RFC3035] and
+           [RFC3471].
+
+           The label contents are specific to the label being
+           represented, such as:
+
+           * The label carried in an MPLS shim header
+             (for LDP this is the Generic Label) is a 20-bit
+             number represented by 4 octets.  Bits 0-19 contain
+             a label or a reserved label value.  Bits 20-31
+             MUST be zero.
+
+             The following is quoted directly from [RFC3032].
+             There are several reserved label values:
+
+                i. A value of 0 represents the
+                   'IPv4 Explicit NULL Label'.  This label
+                   value is only legal at the bottom of the
+                   label stack.  It indicates that the label
+                   stack must be popped, and the forwarding
+                   of the packet must then be based on the
+                   IPv4 header.
+
+               ii. A value of 1 represents the
+                   'Router Alert Label'.  This label value is
+                   legal anywhere in the label stack except at
+                   the bottom.  When a received packet
+                   contains this label value at the top of
+                   the label stack, it is delivered to a
+                   local software module for processing.
+                   The actual forwarding of the packet
+                   is determined by the label beneath it
+                   in the stack.  However, if the packet is
+                   forwarded further, the Router Alert Label
+                   should be pushed back onto the label stack
+                   before forwarding.  The use of this label
+                   is analogous to the use of the
+                   'Router Alert Option' in IP packets
+                   [RFC2113].  Since this label
+                   cannot occur at the bottom of the stack,
+                   it is not associated with a
+                   particular network layer protocol.
+
+              iii. A value of 2 represents the
+                   'IPv6 Explicit NULL Label'.  This label
+                   value is only legal at the bottom of the
+                   label stack.  It indicates that the label
+                   stack must be popped, and the forwarding
+                   of the packet must then be based on the
+                   IPv6 header.
+
+               iv. A value of 3 represents the
+                   'Implicit NULL Label'.
+                   This is a label that an LSR may assign and
+                   distribute, but which never actually
+                   appears in the encapsulation.  When an
+                   LSR would otherwise replace the label
+                   at the top of the stack with a new label,
+                   but the new label is 'Implicit NULL',
+                   the LSR will pop the stack instead of
+                   doing the replacement.  Although
+                   this value may never appear in the
+                   encapsulation, it needs to be specified in
+                   the Label Distribution Protocol, so a value
+                   is reserved.
+
+                v. Values 4-15 are reserved.
+
+           * The frame relay label can be either 10-bits or
+             23-bits depending on the DLCI field size and the
+             upper 22-bits or upper 9-bits must be zero,
+             respectively.
+
+           * For an ATM label the lower 16-bits represents the
+             VCI, the next 12-bits represents the VPI and the
+             remaining bits MUST be zero.
+
+           * The Generalized-MPLS (GMPLS) label contains a
+             value greater than 2^24-1 and used in GMPLS
+             as defined in [RFC3471]."
+       REFERENCE
+          "Multiprotocol Label Switching Architecture,
+           RFC3031.
+
+           MPLS Label Stack Encoding, [RFC3032].
+
+           Use of Label Switching on Frame Relay Networks,
+           RFC3034.
+
+           MPLS using LDP and ATM VC Switching, RFC3035.
+           Generalized Multiprotocol Label Switching
+           (GMPLS) Architecture, [RFC3471]."
+       SYNTAX  Unsigned32 (0..4294967295)
+
+    MplsLabelDistributionMethod ::= TEXTUAL-CONVENTION
+       STATUS  current
+       DESCRIPTION
+          "The label distribution method which is also called
+           the label advertisement mode [RFC3036].
+           Each interface on an LSR is configured to operate
+           in either Downstream Unsolicited or Downstream
+           on Demand."
+       REFERENCE
+          "Multiprotocol Label Switching Architecture,
+           RFC3031.
+
+           LDP Specification, RFC3036, Section 2.6.3."
+       SYNTAX INTEGER {
+                  downstreamOnDemand(1),
+                  downstreamUnsolicited(2)
+              }
+
+    MplsLdpIdentifier ::= TEXTUAL-CONVENTION
+       DISPLAY-HINT "1d.1d.1d.1d:2d"
+       STATUS      current
+       DESCRIPTION
+          "The LDP identifier is a six octet
+           quantity which is used to identify a
+           Label Switching Router (LSR) label space.
+
+           The first four octets identify the LSR and
+           must be a globally unique value, such as a
+           32-bit router ID assigned to the LSR, and the
+           last two octets identify a specific label
+           space within the LSR."
+       SYNTAX  OCTET STRING (SIZE (6))
+
+    MplsLsrIdentifier ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "The Label Switching Router (LSR) identifier is the
+           first 4 bytes of the Label Distribution Protocol
+           (LDP) identifier."
+       SYNTAX  OCTET STRING (SIZE (4))
+    MplsLdpLabelType ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "The Layer 2 label types which are defined for MPLS
+           LDP and/or CR-LDP are generic(1), atm(2), or
+           frameRelay(3)."
+       SYNTAX  INTEGER {
+                 generic(1),
+                 atm(2),
+                 frameRelay(3)
+             }
+
+    MplsLSPID ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "A unique identifier within an MPLS network that is
+           assigned to each LSP.  This is assigned at the head
+           end of the LSP and can be used by all LSRs
+           to identify this LSP.  This value is piggybacked by
+           the signaling protocol when this LSP is signaled
+           within the network.  This identifier can then be
+           used at each LSR to identify which labels are
+           being swapped to other labels for this LSP.  This
+           object  can also be used to disambiguate LSPs that
+           share the same RSVP sessions between the same
+           source and destination.
+
+           For LSPs established using CR-LDP, the LSPID is
+           composed of the ingress LSR Router ID (or any of
+           its own IPv4 addresses) and a locally unique
+           CR-LSP ID to that LSR.  The first two bytes carry
+           the CR-LSPID, and the remaining 4 bytes carry
+           the Router ID.  The LSPID is useful in network
+           management, in CR-LSP repair, and in using
+           an already established CR-LSP as a hop in
+           an ER-TLV.
+
+           For LSPs signaled using RSVP-TE, the LSP ID is
+           defined as a 16-bit (2 byte) identifier used
+           in the SENDER_TEMPLATE and the FILTER_SPEC
+           that can be changed to allow a sender to
+           share resources with itself.  The length of this
+           object should only be 2 or 6 bytes.  If the length
+           of this octet string is 2 bytes, then it must
+           identify an RSVP-TE LSPID, or it is 6 bytes,
+           it must contain a CR-LDP LSPID."
+       REFERENCE
+          "RSVP-TE:  Extensions to RSVP for LSP Tunnels,
+           [RFC3209].
+
+           Constraint-Based LSP Setup using LDP,
+           [RFC3212]."
+       SYNTAX  OCTET STRING (SIZE (2|6))
+
+    MplsLspType ::= TEXTUAL-CONVENTION
+       STATUS  current
+       DESCRIPTION
+          "Types of Label Switch Paths (LSPs)
+           on a Label Switching Router (LSR) or a
+           Label Edge Router (LER) are:
+
+              unknown(1)         -- if the LSP is not known
+                                    to be one of the following.
+
+              terminatingLsp(2)  -- if the LSP terminates
+                                    on the LSR/LER, then this
+                                    is an egressing LSP
+                                    which ends on the LSR/LER,
+
+              originatingLsp(3)  -- if the LSP originates
+                                    from this LSR/LER, then
+                                    this is an ingressing LSP
+                                    which is the head-end of
+                                    the LSP,
+
+           crossConnectingLsp(4) -- if the LSP ingresses
+                                    and egresses on the LSR,
+                                    then it is
+                                    cross-connecting on that
+                                    LSR."
+       SYNTAX INTEGER {
+                  unknown(1),
+                  terminatingLsp(2),
+                  originatingLsp(3),
+                  crossConnectingLsp(4)
+              }
+
+    MplsOwner ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "This object indicates the local network
+           management subsystem that originally created
+           the object(s) in question.  The values of
+           this enumeration are defined as follows:
+
+           unknown(1) - the local network management
+           subsystem cannot discern which
+           component created the object.
+
+           other(2) - the local network management
+           subsystem is able to discern which component
+           created the object, but the component is not
+           listed within the following choices,
+           e.g., command line interface (cli).
+
+           snmp(3) - The Simple Network Management Protocol
+           was used to configure this object initially.
+
+           ldp(4) - The Label Distribution Protocol was
+           used to configure this object initially.
+
+           crldp(5) - The Constraint-Based Label Distribution
+           Protocol was used to configure this object
+           initially.
+
+           rsvpTe(6) - The Resource Reservation Protocol was
+           used to configure this object initially.
+
+           policyAgent(7) - A policy agent (perhaps in
+           combination with one of the above protocols) was
+           used to configure this object initially.
+
+           mplsVpn(8) - This label was configured for MPLS/BGP VPNs
+           as defined in RFC2547.
+
+           cli(9) - The CLI was used to configure this object initially.
+
+           dynamic(10) - The tunnel has been created dynamically.
+
+           An object created by any of the above choices
+           MAY be modified or destroyed by the same or a
+           different choice."
+       SYNTAX  INTEGER {
+                 unknown(1),
+                 other(2),
+                 snmp(3),
+                 ldp(4),
+                 crldp(5),
+                 rsvpTe(6),
+                 policyAgent(7),
+                 mplsVpn(8),
+                 cli(9),
+                 dynamic(10)
+             }
+
+    MplsPathIndexOrZero ::= TEXTUAL-CONVENTION
+       STATUS current
+       DESCRIPTION
+          "A unique identifier used to identify a specific
+           path used by a tunnel.  A value of 0 (zero) means
+           that no path is in use."
+       SYNTAX  Unsigned32(0..4294967295)
+
+    MplsPathIndex ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "A unique value to index (by Path number) an
+           entry in a table."
+       SYNTAX  Unsigned32(1..4294967295)
+
+    MplsRetentionMode ::= TEXTUAL-CONVENTION
+       STATUS  current
+       DESCRIPTION
+          "The label retention mode which specifies whether
+           an LSR maintains a label binding for a FEC
+           learned from a neighbor that is not its next hop
+           for the FEC.
+
+           If the value is conservative(1) then advertised
+           label mappings are retained only if they will be
+           used to forward packets, i.e., if label came from
+           a valid next hop.
+
+           If the value is liberal(2) then all advertised
+           label mappings are retained whether they are from
+           a valid next hop or not."
+       REFERENCE
+          "Multiprotocol Label Switching Architecture,
+           RFC3031.
+
+           LDP Specification, RFC3036, Section 2.6.2."
+       SYNTAX INTEGER {
+                  conservative(1),
+                  liberal(2)
+              }
+
+    MplsTunnelAffinity ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "Describes the configured 32-bit Include-any,
+           include-all, or exclude-all constraint for
+           constraint-based link selection."
+       REFERENCE
+          "RSVP-TE:  Extensions to RSVP for LSP Tunnels,
+           RFC3209, Section 4.7.4."
+       SYNTAX  Unsigned32(0..4294967295)
+
+    MplsTunnelIndex ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "A unique index into mplsTunnelTable.
+           For tunnels signaled using RSVP, this value
+           should correspond to the RSVP Tunnel ID
+           used for the RSVP-TE session."
+       SYNTAX  Unsigned32 (0..65535)
+
+    MplsTunnelInstanceIndex ::= TEXTUAL-CONVENTION
+       STATUS        current
+       DESCRIPTION
+          "The tunnel entry with instance index 0
+           should refer to the configured tunnel
+           interface (if one exists).
+
+           Values greater than 0, but less than or
+           equal to 65535, should be used to indicate
+           signaled (or backup) tunnel LSP instances.
+           For tunnel LSPs signaled using RSVP,
+           this value should correspond to the
+           RSVP LSP ID used for the RSVP-TE
+           LSP.
+
+           Values greater than 65535 apply to FRR
+           detour instances."
+       SYNTAX  Unsigned32(0|1..65535|65536..4294967295)
+
+    TeHopAddressType ::= TEXTUAL-CONVENTION
+       STATUS     current
+       DESCRIPTION
+          "A value that represents a type of address for a
+           Traffic Engineered (TE) Tunnel hop.
+
+           unknown(0)   An unknown address type.  This value
+                        MUST be used if the value of the
+                        corresponding TeHopAddress object is a
+                        zero-length string.  It may also be
+                        used to indicate a TeHopAddress which
+                        is not in one of the formats defined
+                        below.
+
+           ipv4(1)      An IPv4 network address as defined by
+                        the InetAddressIPv4 TEXTUAL-CONVENTION
+                        [RFC3291].
+
+           ipv6(2)      A global IPv6 address as defined by
+                        the InetAddressIPv6 TEXTUAL-CONVENTION
+                        [RFC3291].
+
+           asnumber(3)  An Autonomous System (AS) number as
+                        defined by the TeHopAddressAS
+                        TEXTUAL-CONVENTION.
+
+           unnum(4)     An unnumbered interface index as
+                        defined by the TeHopAddressUnnum
+                        TEXTUAL-CONVENTION.
+
+           lspid(5)     An LSP ID for TE Tunnels
+                        (RFC3212) as defined by the
+                        MplsLSPID TEXTUAL-CONVENTION.
+-- Private Addition
+           unnumv6(6)   An unnumbered IPv6 interface index as
+                        defined by the TeHopAddressUnnumV6
+                        TEXTUAL-CONVENTION.
+
+
+-- End Private Addition
+
+           Each definition of a concrete TeHopAddressType
+           value must be accompanied by a definition
+           of a TEXTUAL-CONVENTION for use with that
+           TeHopAddress.
+
+           To support future extensions, the TeHopAddressType
+           TEXTUAL-CONVENTION SHOULD NOT be sub-typed in
+           object type definitions.  It MAY be sub-typed in
+           compliance statements in order to require only a
+           subset of these address types for a compliant
+           implementation.
+
+           Implementations must ensure that TeHopAddressType
+           objects and any dependent objects
+           (e.g., TeHopAddress objects) are consistent.
+           An inconsistentValue error must be generated
+           if an attempt to change a TeHopAddressType
+           object would, for example, lead to an
+           undefined TeHopAddress value that is
+           not defined herein.  In particular,
+           TeHopAddressType/TeHopAddress pairs
+           must be changed together if the address
+           type changes (e.g., from ipv6(2) to ipv4(1))."
+       REFERENCE
+          "TEXTUAL-CONVENTIONs for Internet Network
+           Addresses, RFC3291.
+
+           Constraint-Based LSP Setup using LDP,
+           [RFC3212]"
+
+       SYNTAX     INTEGER {
+                     unknown(0),
+                     ipv4(1),
+                     ipv6(2),
+                     asnumber(3),
+                     unnum(4),
+                     lspid(5),
+                     unnumv6(6)
+                  }
+
+    TeHopAddress ::= TEXTUAL-CONVENTION
+       STATUS     current
+       DESCRIPTION
+          "Denotes a generic Tunnel hop address,
+           that is, the address of a node which
+           an LSP traverses, including the source
+           and destination nodes.  An address may be
+           very concrete, for example, an IPv4 host
+           address (i.e., with prefix length 32);
+           if this IPv4 address is an interface
+           address, then that particular interface
+           must be traversed.  An address may also
+           specify an 'abstract node', for example,
+           an IPv4 address with prefix length
+           less than 32, in which case, the LSP
+           can traverse any node whose address
+           falls in that range.  An address may
+           also specify an Autonomous System (AS),
+           in which  case the LSP can traverse any
+           node that falls within that AS.
+
+           A TeHopAddress value is always interpreted within
+           the context of an TeHopAddressType value.  Every
+           usage of the TeHopAddress TEXTUAL-CONVENTION
+           is required to specify the TeHopAddressType object
+           which provides the context.  It is suggested that
+           the TeHopAddressType object is logically registered
+           before the object(s) which use the TeHopAddress
+           TEXTUAL-CONVENTION if they appear in the
+           same logical row.
+
+           The value of a TeHopAddress object must always be
+           consistent with the value of the associated
+           TeHopAddressType object.  Attempts to set a
+           TeHopAddress object to a value which is
+           inconsistent with the associated TeHopAddressType
+           must fail with an inconsistentValue error."
+       SYNTAX     OCTET STRING (SIZE (0..32))
+
+    TeHopAddressAS ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "Represents a two or four octet AS number.
+           The AS number is represented in network byte
+           order (MSB first).  A two-octet AS number has
+           the two MSB octets set to zero."
+       REFERENCE
+          "Textual Conventions for Internet Network
+           Addresses, [RFC3291]."
+       SYNTAX      Unsigned32
+
+    TeHopAddressUnnum ::= TEXTUAL-CONVENTION
+       STATUS      current
+       DESCRIPTION
+          "Represents an unnumbered interface:
+
+           octets   contents               encoding
+            1-4     unnumbered interface   network-byte order
+
+           The corresponding TeHopAddressType value is
+           unnum(4)."
+       SYNTAX      Unsigned32
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRIV-LSL-MIB b/MIBS/telco-systems/binos/PRIV-LSL-MIB
new file mode 100644
index 0000000..46a9853
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRIV-LSL-MIB
@@ -0,0 +1,220 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: priv_lsl.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+--
+
+PRIV-LSL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE
+FROM SNMPv2-SMI
+
+MODULE-COMPLIANCE,
+OBJECT-GROUP
+FROM SNMPv2-CONF
+
+TEXTUAL-CONVENTION,
+MacAddress
+FROM SNMPv2-TC
+
+ifIndex
+FROM IF-MIB
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+privLsl MODULE-IDENTITY
+LAST-UPDATED "200803210000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+DESCRIPTION
+"MIB module for management of Logical Service Loopback(LSL) Iometrix compatible product."
+
+REVISION "200803210000Z"
+DESCRIPTION
+"Initial"
+
+::= { switch 113 }
+
+privLslLevel1 OBJECT IDENTIFIER ::= { privLsl 1 } -- all tables and scalars for Lsl level 1
+
+privLslObjects OBJECT IDENTIFIER ::= { privLslLevel1 1 } -- tables and scalars
+privLslNotifications OBJECT IDENTIFIER ::= { privLslLevel1 2 } -- traps according to rfc2580.txt SMIv2-CONF
+privLslConformance OBJECT IDENTIFIER ::= { privLslLevel1 3 } -- conformance according to rfc2580.txt SMIv2-CONF
+
+-- Textual Conventions
+
+PrivLslStates ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "The the switch on/off states for LSL on ports."
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}
+
+-- Object definitiosn in privLslObjects
+
+privLslGlobalMacAddress OBJECT-TYPE
+SYNTAX MacAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object defines the destination mac address assigned
+to lsl packets. The device can recognise the lsl packets
+by a specific destination mac address given by this
+object.
+"
+::= { privLslObjects 1 }
+
+privLslManagementTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrivLslManagementEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"LSL interface extention table.
+This table contains all objects which are used for LSL
+management per interface. It uses ifIndex defined in
+rfc1213"
+::= { privLslObjects 2 }
+
+privLslManagementEntry OBJECT-TYPE
+SYNTAX PrivLslManagementEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The only valid LSL interfaces are phyical port interfaces"
+INDEX { ifIndex }
+::= { privLslManagementTable 1 }
+
+PrivLslManagementEntry ::= SEQUENCE {
+privLslStatus PrivLslStates
+}
+
+privLslStatus OBJECT-TYPE
+SYNTAX PrivLslStates
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object indicates whether the port have Logical Service
+Loopback enabled or disabled. It allows the client to
+determine which interface should be used for this type
+of service"
+::= { privLslManagementEntry 1 }
+
+privIometrixManagementTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrivIometrixManagementEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Iometrix Level 1 table.
+This table contains all objects which are used for Iometrix
+level 1 management per interface. It uses ifIndex defined in
+rfc1213"
+::= { privLslObjects 3 }
+
+privIometrixManagementEntry OBJECT-TYPE
+SYNTAX PrivIometrixManagementEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"the index is ifindex"
+INDEX { ifIndex }
+::= { privIometrixManagementTable 1 }
+
+PrivIometrixManagementEntry ::= SEQUENCE {
+privIometrixStatus PrivLslStates
+}
+
+privIometrixStatus OBJECT-TYPE
+SYNTAX PrivLslStates
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object indicates whether the port have Logical Service
+Loopback enabled or disabled. It allows the client to
+determine which interface should be used for this type
+of service"
+::= { privIometrixManagementEntry 1 }
+
+-- Notification NOTIFICATION-TYPE definitions in privLslNotifications
+-- according to rfc2580.txt SMIv2-CONF
+-- (Currently no notifications)
+
+-- Conformance Information
+privLslGroups OBJECT IDENTIFIER ::= { privLslConformance 1 }
+privLslCompliances OBJECT IDENTIFIER ::= { privLslConformance 2 }
+
+privLevel1ObjectsGroup OBJECT-GROUP
+OBJECTS { privLslGlobalMacAddress, privLslStatus, privIometrixStatus }
+STATUS current
+DESCRIPTION
+"All objects related to level1 logical loopback service. Object
+grouping will be extended if the mib is also extended"
+::= { privLslGroups 1 }
+
+privLevel1Compliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement. It will be extended if new
+functionality is added"
+MODULE -- this module
+MANDATORY-GROUPS { privLevel1ObjectsGroup }
+
+OBJECT privLslGlobalMacAddress
+MIN-ACCESS read-only
+DESCRIPTION
+"read-write access "
+
+OBJECT privLslStatus
+MIN-ACCESS read-only
+DESCRIPTION
+"read-write access "
+
+OBJECT privIometrixStatus
+MIN-ACCESS read-only
+DESCRIPTION
+"read-write access "
+
+::= { privLslCompliances 1 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRIV-VENDORDEF-MIB b/MIBS/telco-systems/binos/PRIV-VENDORDEF-MIB
new file mode 100644
index 0000000..c6c19f0
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRIV-VENDORDEF-MIB
@@ -0,0 +1,28 @@
+PRIV-VENDORDEF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+enterprises
+FROM SNMPv2-SMI;
+
+privateVendorOID MODULE-IDENTITY
+LAST-UPDATED "200709290000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"Vendor Id Definition"
+
+REVISION "200709290000Z"
+DESCRIPTION
+"Initial."
+
+::= { enterprises 738 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-BIST-MIB b/MIBS/telco-systems/binos/PRVT-BIST-MIB
new file mode 100644
index 0000000..d6964f0
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-BIST-MIB
@@ -0,0 +1,568 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-BIST-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+PRVT-BIST-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Integer32
+FROM SNMPv2-SMI
+
+switch,
+reportsL2IfaceUnit,
+reportsL2IfaceSlot,
+reportsL2IfacePort
+FROM PRVT-SWITCH-MIB
+
+TEXTUAL-CONVENTION
+FROM SNMPv2-TC;
+
+prvtBISTMib MODULE-IDENTITY
+LAST-UPDATED "200502160000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"The BIST MIB module for managing build-in self-tests and retrieving the results."
+
+-- revision history
+REVISION "200502160000Z"
+DESCRIPTION
+"Fixed spelling errors and changed the contact info."
+
+REVISION "200410140000Z"
+DESCRIPTION
+"Added functionality to schedule the self-test through SNMP, namely the bistSelfTestExecute
+and bistSelfTestExecuteStatus objects. Added functionality to monitor the result of all self-tests
+that can be executed by the enable mode self-test command."
+
+REVISION "200311180000Z"
+DESCRIPTION
+"Initial version."
+
+::= { switch 108 }
+
+TestResult ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value represents the result of the test."
+SYNTAX INTEGER {
+passed(1),
+failed(2),
+unknown(3),
+notAvailable(4)
+}
+
+--
+-- Groups
+--
+
+prvtBISTNotifications OBJECT IDENTIFIER ::= { prvtBISTMib 0 }
+prvtBISTObjects OBJECT IDENTIFIER ::= { prvtBISTMib 1 }
+prvtBISTConformance OBJECT IDENTIFIER ::= { prvtBISTMib 2 }
+
+--
+-- prvtBISTObjects
+--
+bistConfig OBJECT IDENTIFIER ::= { prvtBISTObjects 1 }
+bistStatus OBJECT IDENTIFIER ::= { prvtBISTObjects 2 }
+bistResult OBJECT IDENTIFIER ::= { prvtBISTObjects 3 }
+
+--
+-- bistConfig
+--
+bistSelfTestExecute OBJECT-TYPE
+SYNTAX INTEGER {
+noop(1), -- no operation
+execute(2) -- start the test
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Setting this object to execute(2) starts the execution of the BIST test and
+stores the results in bistResult.
+
+This object does not execute port tests and does not influence the content
+of portTestTable.
+
+The results of the test execution are displayed in bistResult. A GET on this
+object always returns noop(1)."
+::= { bistConfig 1 }
+
+--
+-- bistStatus
+--
+bistSelfTestExecuteStatus OBJECT-TYPE
+SYNTAX INTEGER {
+not-started(1),
+in-progress(2),
+success(3),
+error(4)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object displays the status of the last BIST execution. A value of
+not-started(1) indicates that the test has not been manually executed since
+start-up.
+
+A value of in-progress(2) indicates that the test is still being executed.
+success(3) indicates that the test has been executed, error(4) is returned,
+if the test was not executed due to an internal software error."
+::= { bistStatus 1 }
+
+--
+-- bistResult
+--
+bistCPU OBJECT IDENTIFIER ::= { bistResult 1 }
+bistRAM OBJECT IDENTIFIER ::= { bistResult 2 }
+bistUART OBJECT IDENTIFIER ::= { bistResult 3 }
+bistSwitchCore OBJECT IDENTIFIER ::= { bistResult 4 }
+bistNVRAM OBJECT IDENTIFIER ::= { bistResult 5 }
+bistPowerSupply OBJECT IDENTIFIER ::= { bistResult 6 }
+bistOnboardPower OBJECT IDENTIFIER ::= { bistResult 7 }
+bistFan OBJECT IDENTIFIER ::= { bistResult 8 }
+bistTemperature OBJECT IDENTIFIER ::= { bistResult 9 }
+bistUPS OBJECT IDENTIFIER ::= { bistResult 10 }
+bistPorts OBJECT IDENTIFIER ::= { bistResult 11 }
+
+--
+-- bistCPU
+--
+cPUTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CPUTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the CPU test Table for verification, via SNMP, of the functionality of
+the OS device CPU"
+::= { bistCPU 1 }
+
+cPUTestEntry OBJECT-TYPE
+SYNTAX CPUTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "cpuTestEntry"
+INDEX { cpuTestType }
+::= { cPUTestTable 1 }
+
+CPUTestEntry ::= SEQUENCE {
+cpuTestType INTEGER,
+cpuTestResult TestResult
+}
+
+cpuTestType OBJECT-TYPE
+SYNTAX INTEGER {
+bistCPUValidation(1),
+bistCPUUsage(2)
+}
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"CPU test type:
+bistCPUValidation(1), Verifying the functionality of the CPU.
+bistCPUUsage(2), Verifying the CPU usage."
+::= { cPUTestEntry 1 }
+
+cpuTestResult OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The result of the current CPU test."
+::= { cPUTestEntry 2 }
+
+--
+-- bistRAM
+--
+ramTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF RamTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the RAM test Table for verification, via SNMP, of the functionality of
+the OS device RAM"
+::= { bistRAM 1 }
+
+ramTestEntry OBJECT-TYPE
+SYNTAX RamTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "ramTestEntry"
+INDEX { ramTestType }
+::= { ramTestTable 1 }
+
+RamTestEntry ::= SEQUENCE {
+ramTestType INTEGER,
+ramTestResult TestResult
+}
+
+ramTestType OBJECT-TYPE
+SYNTAX INTEGER {
+bistRAMValidation(1),
+bistRAMUsage(2)
+}
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"RAM test type:
+bistRAMValidation(1), Verifying the RAM functionality.
+bistRAMUsage(2), Verifying the RAM usage."
+::= { ramTestEntry 1 }
+
+ramTestResult OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The result of the current CPU test."
+::= { ramTestEntry 2 }
+
+--
+-- bistUART
+--
+uartExistTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF UartExistTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the test Table for verification, via SNMP, of the existence of UARTs in
+the OS device"
+::= { bistUART 1 }
+
+uartExistTestEntry OBJECT-TYPE
+SYNTAX UartExistTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "uartExistTestEntry"
+INDEX { uartIndex }
+::= { uartExistTestTable 1 }
+
+UartExistTestEntry ::= SEQUENCE {
+uartIndex Integer32,
+uartExistTestResult TestResult
+}
+
+uartIndex OBJECT-TYPE
+SYNTAX Integer32(1..65535)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The UART index e.g. 1,2 .. NUM of UARTs in the device"
+::= { uartExistTestEntry 1 }
+
+uartExistTestResult OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The result of the current UART test."
+::= { uartExistTestEntry 2 }
+
+--
+-- bistSwitchCore
+--
+bistCrossbarExistence OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Verifying Crossbar Existence."
+::= { bistSwitchCore 1 }
+
+--
+-- bistNVRAM
+--
+nvramTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF NvramTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the NVRAM test Table for verification, via SNMP, of the functionality of
+the OS device NVRAM content"
+::= { bistNVRAM 1 }
+
+nvramTestEntry OBJECT-TYPE
+SYNTAX NvramTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "nvramTestEntry"
+INDEX { nvramTestType }
+::= { nvramTestTable 1 }
+
+NvramTestEntry ::= SEQUENCE {
+nvramTestType INTEGER,
+nvramTestResult TestResult
+}
+
+nvramTestType OBJECT-TYPE
+SYNTAX INTEGER {
+bistBootLoaderValidation(1),
+bistApplicationValidation(2),
+bistStartupConfigValidation(3),
+bistScriptFileSystemValidation(4),
+bistJavaImageValidation(5),
+bistPROMValidation(6)
+}
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"RAM test type:
+bistRAMValidation(1), Verifying the Boot Loader Image.
+bistApplicationValidation(2), Verifying the Application Image.
+bistStartupConfigValidation(3), Verifying the Startup Configuration File.
+bistScriptFileSystemValidation(4), Verifying the Script File System.
+bistJavaImageValidation(5), Verifying the Java Image.
+bistPROMValidation(6), Verifying the PROM."
+::= { nvramTestEntry 1 }
+
+nvramTestResult OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The result of the current NVRAM test."
+::= { nvramTestEntry 2 }
+
+--
+-- bistPowerSupply
+--
+powerSupplyTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PowerSupplyTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the test Table for verification, via SNMP, of the status of the power supplies
+in the OS device. Each power supply installed has a row index, determined by its
+physical position."
+::= { bistPowerSupply 1 }
+
+powerSupplyTestEntry OBJECT-TYPE
+SYNTAX PowerSupplyTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "powerSupplyTestEntry"
+INDEX { powerSupplyIndex }
+::= { powerSupplyTestTable 1 }
+
+PowerSupplyTestEntry ::= SEQUENCE {
+powerSupplyIndex Integer32,
+powerSupplyTestResult TestResult
+}
+
+powerSupplyIndex OBJECT-TYPE
+SYNTAX Integer32(1..65535)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The powerSupplyIndex index e.g. 1,2 .. number of the power supply in the device"
+::= { powerSupplyTestEntry 1 }
+
+powerSupplyTestResult OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Verifying the operation of the Power Supply."
+::= { powerSupplyTestEntry 2 }
+
+--
+-- bistOnboardPower
+--
+onboardPowerTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF OnboardPowerTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the test Table for verification, via SNMP, of the
+functionality of the OS device onboard power"
+::= { bistOnboardPower 1 }
+
+onboardPowerTestEntry OBJECT-TYPE
+SYNTAX OnboardPowerTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "onboardPowerEntry"
+INDEX { onboardPowerTestType }
+::= { onboardPowerTestTable 1 }
+
+OnboardPowerTestEntry ::= SEQUENCE {
+onboardPowerTestType INTEGER,
+onboardPowerTestResult TestResult
+}
+
+onboardPowerTestType OBJECT-TYPE
+SYNTAX INTEGER {
+bistOnboardPowerPHY(1),
+bistOnboardPowerCPU(2),
+bistOnboardPowerOC(3),
+bistOnboardPower3-2V(4),
+bistOnboardPower2-5V(5),
+bistOnboardPower1-8V(6),
+bistOnboardPower1-5V(7),
+bistOnboardPower1-25V(8)
+}
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Onboard power test type:
+bistOnboardPowerPHY(1), Verifying Onboard Power PHY.
+bistOnboardPowerCPU(2), Verifying Onboard Power CPU.
+bistOnboardPowerOC(3), Verifying Onboard Power OC.
+bistOnboardPower3-2V(4), Verifying Onboard Power 3.2V.
+bistOnboardPower2-5V(5), Verifying Onboard Power 2.5V.
+bistOnboardPower1-8V(6), Verifying Onboard Power 1.8V.
+bistOnboardPower1-5V(7), Verifying Onboard Power 1.5V.
+bistOnboardPower1-25V(8) Verifying Onboard Power 1.25V."
+::= { onboardPowerTestEntry 1 }
+
+onboardPowerTestResult OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The result of the current onboard power test."
+::= { onboardPowerTestEntry 2 }
+
+--
+-- bistFan
+--
+fanTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF FanTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the test Table for verification, via SNMP, of the status of the fans
+in the OS device. Each fan installed has a row index, determined by its physical
+position."
+::= { bistFan 1 }
+
+fanTestEntry OBJECT-TYPE
+SYNTAX FanTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "fanTestEntry"
+INDEX { fanIndex }
+::= { fanTestTable 1 }
+
+FanTestEntry ::= SEQUENCE {
+fanIndex Integer32,
+fanTestResult TestResult
+}
+
+fanIndex OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The fan index e.g. 1,2 .. number of the fan in the device"
+::= { fanTestEntry 1 }
+
+fanTestResult OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Verifying the operation of the fan."
+::= { fanTestEntry 2 }
+
+--
+-- bistTemperatureTest
+--
+bistTemperatureTest OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Verifying the Temperature."
+::= { bistTemperature 1 }
+
+--
+-- bistUPSTest
+--
+bistUPSTest OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Verifying UPS."
+::= { bistUPS 1 }
+
+--
+-- bistPorts
+--
+portsTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PortsTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the ports test Table for verification, via SNMP, of the functionality of
+all LAN-ports (to be performed with local loop-back)"
+::= { bistPorts 1 }
+
+portsTestEntry OBJECT-TYPE
+SYNTAX PortsTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Defines the ports test entry for verification, via SNMP, of the functionality of
+a LAN-port (to be performed with local loop-back)"
+INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot,reportsL2IfacePort }
+::= { portsTestTable 1 }
+
+PortsTestEntry ::= SEQUENCE {
+portTest TestResult
+}
+
+portTest OBJECT-TYPE
+SYNTAX TestResult
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Verifying the functionality of a LAN-port (to be performed with local loop-back)."
+::= { portsTestEntry 1 }
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-CES-MIB b/MIBS/telco-systems/binos/PRVT-CES-MIB
new file mode 100644
index 0000000..8a548b7
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-CES-MIB
@@ -0,0 +1,1382 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-CES-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-CES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+IpAddress,
+Gauge32,
+Integer32,
+Unsigned32,
+NOTIFICATION-TYPE
+FROM SNMPv2-SMI
+
+TimeStamp
+FROM SNMPv2-TC
+
+dsx1ConfigEntry
+FROM DS1-MIB
+
+TEXTUAL-CONVENTION
+FROM SNMPv2-TC
+
+MODULE-COMPLIANCE, NOTIFICATION-GROUP,
+OBJECT-GROUP
+FROM SNMPv2-CONF
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+prvtCESMib MODULE-IDENTITY
+LAST-UPDATED "200905180000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This module includes configuration parameters for DS1 modules not included in
+DS1-MIB."
+
+-- revision history
+REVISION "200905180000Z"
+DESCRIPTION
+"OC3 Alarm Enhacements"
+
+REVISION "200905140000Z"
+DESCRIPTION
+"Add prvtCESApsTable"
+
+REVISION "200905050000Z"
+DESCRIPTION
+"Add prvtCESUpdateFirmwareTable"
+
+REVISION "200903190000Z"
+DESCRIPTION
+"Add new objects prvtCESServiceClock, prvtCESModuleServiceClock"
+
+REVISION "200902250000Z"
+DESCRIPTION
+"Add prvtCESCICTable, prvtCESCICMappTable,
+prvtCESModulePolicyLopsEnter, prvtCESModulePolicyLopsExit "
+REVISION "200902160000Z"
+DESCRIPTION
+"Modified values for objects
+prvtCESModulePolicyLops, prvtCESModulePolicyRbit,
+prvtCESModulePolicyRd"
+REVISION "200806190000Z"
+DESCRIPTION
+"Added new objects
+prvtCESClearPortStatistics, prvtCESModuleClearCircuitStatistics,
+prvtCESModuleLbit, prvtCESModulePolicyLops,
+prvtCESModulePolicyLbit, prvtCESModulePolicyRbit,
+prvtCESModulePolicyRd, prvtCESModulePolicyIdlePattern,
+prvtCESModulePolicyIdleSignalling"
+
+REVISION "200603070000Z"
+DESCRIPTION
+"Added an additional port index to the alarm table."
+
+REVISION "200602230000Z"
+DESCRIPTION
+"Added the TCA alarms table objects and the TCA alarm trap."
+
+REVISION "200503110000Z"
+DESCRIPTION
+"Initial version."
+
+::= { switch 111 }
+
+--
+-- Variable Type definitions
+--
+
+ConfigAction ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value is used to specify what is to be done with unapplied CES module configuration."
+SYNTAX INTEGER {
+noop(1),
+applyConfiguration(2),
+rejectConfiguration(3),
+restart(4)
+}
+
+E1Impedance ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value is used to configure E1 line type termination impedance."
+SYNTAX INTEGER {
+notApplicable(0),
+e1-75ohm(1),
+e1-75hrl(2),
+e1-120ohm(3),
+e1-120hrl(4)
+}
+
+T1LongCableLength ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value is used to configure T1 long cable length."
+SYNTAX INTEGER {
+notApplicable (1),
+neg75dB (2),
+neg15dB (3),
+neg225dB (4),
+zerodB (5)
+}
+
+T1GainLimit ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value is used to configure T1 type Tx or Rx gain limit."
+SYNTAX INTEGER {
+notApplicable(0),
+none(1),
+gain30(2),
+gain36(3)
+}
+
+CESLineType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value is used to configure the line mode common for all TDM ports of the module."
+SYNTAX INTEGER {
+e1(1),
+t1(2),
+e1-sdh(3),
+t1-sdh(4),
+t1-sonet(5)
+}
+
+ServiceClock ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This values are used to configure transmit clock as one of this modes."
+SYNTAX INTEGER{
+notAplicable(0),
+loopTiming (1),
+localTiming (2),
+adaptive	(3),
+differntial (4)
+}
+
+prvtCESNotifications OBJECT IDENTIFIER ::= { prvtCESMib 0 }
+prvtCESObjects OBJECT IDENTIFIER ::= { prvtCESMib 1 }
+prvtCESConformance OBJECT IDENTIFIER ::= { prvtCESMib 2 }
+
+--
+-- ces objects
+--
+prvtCESDsx1ExtTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCESDsx1ExtEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object for configuring DS1 interfaces, not supported in dsx1ConfigTable."
+::= { prvtCESObjects 1 }
+
+prvtCESDsx1ExtEntry OBJECT-TYPE
+SYNTAX PrvtCESDsx1ExtEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"prvtCESDsx1ExtEntry"
+AUGMENTS { dsx1ConfigEntry }
+::= { prvtCESDsx1ExtTable 1 }
+
+PrvtCESDsx1ExtEntry ::= SEQUENCE {
+prvtCESE1Impedance E1Impedance,
+prvtCEST1GainLimit T1GainLimit,
+prvtCESPortShutdown INTEGER,
+prvtCESPortLineType INTEGER,
+prvtCEST1LongCableLength T1LongCableLength,
+prvtCESPortOperStatus INTEGER,
+prvtCESClearPortStatistics INTEGER,
+prvtCESServiceClock ServiceClock
+}
+
+prvtCESE1Impedance OBJECT-TYPE
+SYNTAX E1Impedance
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object configures temination impedance for TDM ports if the line type is E1."
+::= { prvtCESDsx1ExtEntry 1 }
+
+prvtCEST1GainLimit OBJECT-TYPE
+SYNTAX T1GainLimit
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object configures Tx or Rx gain limit for TDM ports if the line type is T1."
+::= { prvtCESDsx1ExtEntry 2 }
+
+prvtCESPortShutdown OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Shutdown TDM port."
+::= { prvtCESDsx1ExtEntry 3 }
+
+prvtCESPortLineType OBJECT-TYPE
+SYNTAX INTEGER {
+other(1),
+dsx1ESF(2),
+dsx1D4(3),
+dsx1E1(4),
+dsx1E1CRC(5),
+dsx1E1MF(6),
+dsx1E1CRCMF(7),
+dsx1Unframed(8),
+dsx1E1Unframed(9),
+dsx1DS2M12(10),
+dsx1E2(11),
+dsx1E1Q50(12),
+dsx1E1Q50CRC(13),
+dsx1SFCAS(14),
+dsx1ESFCAS(15),
+notApplicable(16)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Additional line types. For reference see object dsx1LineType"
+::= { prvtCESDsx1ExtEntry 4 }
+
+prvtCEST1LongCableLength OBJECT-TYPE
+SYNTAX T1LongCableLength
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Long cable length options for T1 mode."
+::= { prvtCESDsx1ExtEntry 5 }
+
+prvtCESPortOperStatus OBJECT-TYPE
+SYNTAX INTEGER {
+up(1),
+down(2),
+testing(3),
+unknown(4),
+dormant(5),
+notPresent(6),
+lowerlayerDown(7)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"TDM link state."
+::= { prvtCESDsx1ExtEntry 6 }
+
+prvtCESClearPortStatistics OBJECT-TYPE
+SYNTAX INTEGER {
+none ( 0 ),
+clear ( 1 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Clear port statistics."
+::= { prvtCESDsx1ExtEntry 7 }
+
+prvtCESServiceClock OBJECT-TYPE
+SYNTAX ServiceClock
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Service Clock available only for DS1 interface."
+::= { prvtCESDsx1ExtEntry 8 }
+
+prvtCESUnappTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCESUnappEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table displays CES module configuration which will take effect
+after prvtCESModuleConf is set to applyConfiguration(2)."
+::= { prvtCESObjects 3 }
+
+prvtCESUnappEntry OBJECT-TYPE
+SYNTAX PrvtCESUnappEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"prvtCESUnappEntry"
+AUGMENTS { dsx1ConfigEntry }
+::= { prvtCESUnappTable 1 }
+
+PrvtCESUnappEntry ::= SEQUENCE {
+prvtCESUnappLineType INTEGER,
+prvtCESUnappLineCoding INTEGER,
+prvtCESUnappLoopbackConfig INTEGER,
+prvtCESUnappSignalMode INTEGER,
+prvtCESUnappTransmitClockSource INTEGER,
+prvtCESUnappTransmitClockBackup INTEGER,
+prvtCESUnappLineLength Integer32,
+prvtCESUnappLineMode INTEGER,
+prvtCESUnappLineBuildOut INTEGER,
+prvtCESUnappE1Impedance E1Impedance,
+prvtCESUnappT1GainLimit T1GainLimit,
+prvtCESUnappIPAddress IpAddress,
+prvtCESUnappIPAddressMask IpAddress,
+prvtCESUnappGateway IpAddress
+}
+
+prvtCESUnappLineType OBJECT-TYPE
+SYNTAX INTEGER {
+other(1),
+dsx1ESF(2),
+dsx1D4(3),
+dsx1E1(4),
+dsx1E1CRC(5),
+dsx1E1MF(6),
+dsx1E1CRCMF(7),
+dsx1Unframed(8),
+dsx1E1Unframed(9),
+dsx1DS2M12(10),
+dsx1E2(11),
+dsx1E1Q50(12),
+dsx1E1Q50CRC(13)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1LineType before configuration is applied."
+::= { prvtCESUnappEntry 1 }
+
+prvtCESUnappLineCoding OBJECT-TYPE
+SYNTAX INTEGER {
+dsx1JBZS (1),
+dsx1B8ZS (2),
+dsx1HDB3 (3),
+dsx1ZBTSI (4),
+dsx1AMI (5),
+other(6),
+dsx1B6ZS(7)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1LineCoding before configuration is applied."
+::= { prvtCESUnappEntry 2 }
+
+prvtCESUnappLoopbackConfig OBJECT-TYPE
+SYNTAX INTEGER {
+dsx1NoLoop(1),
+dsx1PayloadLoop(2),
+dsx1LineLoop(3),
+dsx1OtherLoop(4),
+dsx1InwardLoop(5),
+dsx1DualLoop(6)
+}
+
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1LoopbackConfig before configuration is applied."
+::= { prvtCESUnappEntry 3 }
+
+prvtCESUnappSignalMode OBJECT-TYPE
+SYNTAX INTEGER {
+none (1),
+robbedBit (2),
+bitOriented (3),
+messageOriented (4),
+other (5)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1SignalMode before configuration is applied."
+::= { prvtCESUnappEntry 4 }
+
+prvtCESUnappTransmitClockSource OBJECT-TYPE
+SYNTAX INTEGER {
+loopTiming(1),
+localTiming(2),
+throughTiming(3),
+adaptive (4),
+external-port (5)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1TransmitClockSource before configuration is applied."
+::= { prvtCESUnappEntry 5 }
+
+prvtCESUnappTransmitClockBackup OBJECT-TYPE
+SYNTAX INTEGER {
+enable (1),
+disable(2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1TransmitClockBackup before configuration is applied."
+::= { prvtCESUnappEntry 6 }
+
+prvtCESUnappLineLength OBJECT-TYPE
+SYNTAX Integer32 (0..64000)
+UNITS "meters"
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1LineLength before configuration is applied."
+::= { prvtCESUnappEntry 7 }
+
+prvtCESUnappLineMode OBJECT-TYPE
+SYNTAX INTEGER {
+csu(1),
+dsu(2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1LineMode before configuration is applied."
+::= { prvtCESUnappEntry 8 }
+
+prvtCESUnappLineBuildOut OBJECT-TYPE
+SYNTAX INTEGER {
+notApplicable (1),
+neg75dB (2),
+neg15dB (3),
+neg225dB (4),
+zerodB (5)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of dsx1LineBuildOut before configuration is applied."
+::= { prvtCESUnappEntry 9 }
+
+prvtCESUnappE1Impedance OBJECT-TYPE
+SYNTAX E1Impedance
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of prvtCESE1Impedance before configuration is applied."
+::= { prvtCESUnappEntry 10 }
+
+prvtCESUnappT1GainLimit OBJECT-TYPE
+SYNTAX T1GainLimit
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of prvtCEST1GainLimit before configuration is applied."
+::= { prvtCESUnappEntry 11 }
+
+prvtCESUnappIPAddress OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The CES Module IP address before configuration is applied."
+::= { prvtCESUnappEntry 12 }
+
+prvtCESUnappIPAddressMask OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The CES Module IP address mask before configuration is applied."
+::= { prvtCESUnappEntry 13 }
+
+prvtCESUnappGateway OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The CES Module Gateway before configuration is applied."
+::= { prvtCESUnappEntry 14 }
+
+prvtCESModuleConfTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCESModuleConfEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object for configuring options that are applied to the entire module."
+::= { prvtCESObjects 2 }
+
+prvtCESModuleConfEntry OBJECT-TYPE
+SYNTAX PrvtCESModuleConfEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"prvtCESModuleConfEntry"
+INDEX {prvtCESModuleIndex}
+::= { prvtCESModuleConfTable 1 }
+
+PrvtCESModuleConfEntry ::= SEQUENCE {
+prvtCESModuleIndex Integer32,
+prvtCESModuleLineType CESLineType,
+prvtCESModuleTxClock INTEGER,
+prvtCESModuleTxBackupClock INTEGER,
+prvtCESModuleConfig ConfigAction,
+prvtCESModuleIPAddress IpAddress,
+prvtCESModuleIPAddressMask IpAddress,
+prvtCESModuleGateway IpAddress,
+prvtCESModuleUpTime TimeStamp,
+prvtCESModuleMACAddress OCTET STRING,
+prvtCESModuleHardwareRevision OCTET STRING,
+prvtCESModuleFirmwareVersion OCTET STRING,
+prvtCESModuleClearCircuitStatistics INTEGER,
+prvtCESModuleLbit INTEGER,
+prvtCESModulePolicyLops INTEGER,
+prvtCESModulePolicyLbit INTEGER,
+prvtCESModulePolicyRbit INTEGER,
+prvtCESModulePolicyRd INTEGER,
+prvtCESModulePolicyIdlePattern Unsigned32,
+prvtCESModulePolicyIdleSignalling Unsigned32,
+prvtCESModulePolicyLopsEnter Integer32,
+prvtCESModulePolicyLopsExit Integer32,
+prvtCESModulePolicyuUnstrLbit INTEGER,
+prvtCESModulePolicyuStrReplace INTEGER,
+prvtCESModulePolicyuUnstrReplace INTEGER,
+prvtCESModulePolicyuUnstrLops INTEGER,
+prvtCESModuleServiceClock ServiceClock,
+prvtCESModulePolicyuUnstrReplacePattern Integer32
+}
+
+prvtCESModuleIndex OBJECT-TYPE
+SYNTAX Integer32(1..65535)
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Index of each CES module installed."
+::= { prvtCESModuleConfEntry 1 }
+
+prvtCESModuleLineType OBJECT-TYPE
+SYNTAX CESLineType
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Line mode for the module."
+::= { prvtCESModuleConfEntry 2 }
+
+prvtCESModuleTxClock OBJECT-TYPE
+SYNTAX INTEGER {
+loopTiming(1),
+localTiming(2),
+throughTiming(3),
+adaptive (4),
+external-port (5),
+line (6),
+ptp(7)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Configures Transmit Source Clock for the module."
+::= { prvtCESModuleConfEntry 3 }
+
+prvtCESModuleTxBackupClock OBJECT-TYPE
+SYNTAX INTEGER {
+enable (1),
+disable (2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Configures Backup Clock for the module."
+::= { prvtCESModuleConfEntry 4 }
+
+prvtCESModuleConfig OBJECT-TYPE
+SYNTAX ConfigAction
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"When this object is set to applyConfiguration(2), the module is restarted
+and the changes in dsx1ConfigTable or prvtCESConfTable are applied. The object
+must be set to rejectConfiguration(3) to remove unapplied changes. If the object
+is set to restart(4), the module is restarted with applying the changes.
+This object always returns a value of noop(1) when get."
+::= { prvtCESModuleConfEntry 5 }
+
+prvtCESModuleIPAddress OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The CES Module IP address after configuration is applied."
+::= { prvtCESModuleConfEntry 6 }
+
+prvtCESModuleIPAddressMask OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The CES Module IP address mask after configuration is applied."
+::= { prvtCESModuleConfEntry 7 }
+
+prvtCESModuleGateway OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" CES Module Gateway after configuration is applied."
+::= { prvtCESModuleConfEntry 8 }
+
+prvtCESModuleUpTime OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"CES Up Time"
+::= { prvtCESModuleConfEntry 9 }
+
+prvtCESModuleMACAddress OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"CES MAC Address"
+::= { prvtCESModuleConfEntry 10 }
+
+prvtCESModuleHardwareRevision OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+" CES Hardware revision"
+::= { prvtCESModuleConfEntry 11 }
+
+prvtCESModuleFirmwareVersion OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+" CES Firmware revision"
+::= { prvtCESModuleConfEntry 12 }
+
+prvtCESModuleClearCircuitStatistics OBJECT-TYPE
+SYNTAX INTEGER {
+none ( 0 ),
+clear ( 1 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Clear circuits statistics."
+::= { prvtCESModuleConfEntry 13 }
+
+prvtCESModuleLbit OBJECT-TYPE
+SYNTAX INTEGER {
+enable ( 1 ),
+disable ( 2 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Enable/disable L bit set upon AIS
+defect detection, in structure agnostic mode."
+::= { prvtCESModuleConfEntry 14 }
+
+prvtCESModulePolicyLops OBJECT-TYPE
+SYNTAX INTEGER {
+idle ( 0 ),
+all-one ( 1 ),
+channel-idle ( 2 ),
+none ( 3 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Controls policy lops. Object does not require module to be restarted."
+::= { prvtCESModuleConfEntry 15 }
+
+prvtCESModulePolicyLbit OBJECT-TYPE
+SYNTAX INTEGER {
+idle ( 0 ),
+all-one ( 1 ),
+channel-idle ( 2 ),
+none ( 3 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Controls policy lbit. Object does not require module to be restarted."
+::= { prvtCESModuleConfEntry 16 }
+
+prvtCESModulePolicyRbit OBJECT-TYPE
+SYNTAX INTEGER {
+none ( 0 ),
+rai ( 1 ),
+channel-idle ( 2 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Controls policy rbit. Object does not require module to be restarted."
+::= { prvtCESModuleConfEntry 17 }
+
+prvtCESModulePolicyRd OBJECT-TYPE
+SYNTAX INTEGER {
+none ( 0 ),
+rai ( 1 ),
+channel-idle ( 2 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Controls policy rd. Object does not require module to be restarted."
+::= { prvtCESModuleConfEntry 18 }
+
+prvtCESModulePolicyIdlePattern OBJECT-TYPE
+SYNTAX Unsigned32 (0..255)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Controls policy idle pattern. Object does not require module to be restarted."
+::= { prvtCESModuleConfEntry 19 }
+
+prvtCESModulePolicyIdleSignalling OBJECT-TYPE
+SYNTAX Unsigned32 (1..15)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Controls policy idle signalling. Object does not require module to be restarted."
+::= { prvtCESModuleConfEntry 20 }
+
+prvtCESModulePolicyLopsEnter OBJECT-TYPE
+SYNTAX Integer32 (1..1023)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Controls the number of consecutive missed
+packets required to enter LOPS state.
+Object does not require module to be restarted."
+::= {prvtCESModuleConfEntry 21}
+
+prvtCESModulePolicyLopsExit OBJECT-TYPE
+SYNTAX Integer32 (1..1023)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Controls the number of consecutive missed
+packets required to exit LOPS state.
+Object does not require module to be restarted."
+::= {prvtCESModuleConfEntry 22}
+
+prvtCESModulePolicyuUnstrLbit OBJECT-TYPE
+SYNTAX INTEGER{
+none(0),
+all-one(1)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"If a packet is received with L bit set, and the payload is present (not suppressed),
+one of the following is sent to the TDM line, according to a globally configurable unstructured L-flag policy:
+The AIS pattern all-one
+The received payload as-is none"
+DEFVAL { all-one }
+::= {prvtCESModuleConfEntry 23}
+
+prvtCESModulePolicyuStrReplace OBJECT-TYPE
+SYNTAX INTEGER{
+all-one(1),
+idle (2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"If a missing packet is detected, one of the following is sent to the TDM line,
+according to a globally configurable structured missing packet replacement policy:
+The AIS pattern all-one on the relevant timeslots
+The configured IDLE pattern"
+DEFVAL { all-one }
+::= {prvtCESModuleConfEntry 24}
+
+prvtCESModulePolicyuUnstrReplace OBJECT-TYPE
+SYNTAX INTEGER{
+all-one(1),
+idle (2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"If a missing packet is detected, one of the following is sent to the TDM line,
+according to a globally configurable unstructured missing packet replacement policy:
+The AIS pattern all-one
+The configured IDLE pattern"
+DEFVAL { all-one }
+::= {prvtCESModuleConfEntry 25}
+
+
+prvtCESModulePolicyuUnstrLops OBJECT-TYPE
+SYNTAX INTEGER{
+none(0),
+all-one(1)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"If a CES circuit enters the LOPS state, one of the following is sent to the TDM line,
+according to a globally configurable unstructured missing packet replacement policy:
+The AIS pattern all-one
+The contents of the jitter buffer - none"
+DEFVAL { all-one }
+::= {prvtCESModuleConfEntry 26}
+
+prvtCESModuleServiceClock OBJECT-TYPE
+SYNTAX ServiceClock
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Clock mode for CES module"
+::= {prvtCESModuleConfEntry 27}  
+
+
+prvtCESModulePolicyuUnstrReplacePattern OBJECT-TYPE
+SYNTAX Integer32 (1..255)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Unstructured packet replace policy pattern number"
+::= {prvtCESModuleConfEntry 28}  
+prvtCESDsx1AlarmTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCESDsx1AlarmEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object for configuring and displaying TDM ports TCA thresholds."
+::= { prvtCESObjects 4 }
+
+prvtCESDsx1AlarmEntry OBJECT-TYPE
+SYNTAX PrvtCESDsx1AlarmEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"prvtCESDsx1AlarmEntry"
+INDEX {prvtCESDsx1AlarmPort,prvtCESDsx1AlarmIndex}
+::= { prvtCESDsx1AlarmTable 1 }
+
+PrvtCESDsx1AlarmEntry ::= SEQUENCE {
+prvtCESDsx1AlarmPort Integer32,
+prvtCESDsx1AlarmIndex Gauge32,
+prvtCESDsx1AlarmVariable OBJECT IDENTIFIER,
+prvtCESDsx1AlarmThreshold Integer32,
+prvtCESDsx1AlarmValue Integer32
+}
+
+prvtCESDsx1AlarmPort OBJECT-TYPE
+SYNTAX Integer32(1..65535)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+" The DS1 port for which this alarm is configured. "
+::= { prvtCESDsx1AlarmEntry 1 }
+
+prvtCESDsx1AlarmIndex OBJECT-TYPE
+SYNTAX Gauge32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+" An integer uniquely identifying an alarm entry."
+::= { prvtCESDsx1AlarmEntry 2 }
+
+prvtCESDsx1AlarmVariable OBJECT-TYPE
+SYNTAX OBJECT IDENTIFIER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The OID of the variable whose value is being monitored. Depending on the time interval,
+the error condition and the ifIndex of the TDM interface, this points to an object from an entry in
+dsx1CurrentTable or dsx1TotalTable."
+::= { prvtCESDsx1AlarmEntry 3 }
+
+prvtCESDsx1AlarmThreshold OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The alarm condition threshold for this alarm entry. The alarm is triggered if the value of the
+object pointed by prvtCESDsx1AlarmVariable remains above this threshold for more than 3 seconds."
+::= { prvtCESDsx1AlarmEntry 4 }
+
+prvtCESDsx1AlarmValue OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"The value of the object pointed to by prvtCESDsx1AlarmVariable, present for notification purposes."
+::= { prvtCESDsx1AlarmEntry 5 }
+
+prvtCESAlarmMonitor OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"CES alarm monitor"
+DEFVAL { enable }
+::= { prvtCESObjects 5 }
+
+prvtCESCICTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCESCICEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains objects for configuring Clock Input Controller."
+::= { prvtCESObjects 6 }
+
+prvtCESCICEntry OBJECT-TYPE
+SYNTAX PrvtCESCICEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"prvtCESCICEntry"
+INDEX {prvtCESCICModuleId,prvtCESCICNumber}
+::= { prvtCESCICTable 1 }
+
+PrvtCESCICEntry ::= SEQUENCE {
+prvtCESCICModuleId Integer32,
+prvtCESCICNumber Gauge32,
+prvtCESCICClockNumber Integer32,
+prvtCESCICMode 	 INTEGER,
+prvtCESCICTdmPort Integer32,
+prvtCESCICCircuit Integer32,
+prvtCESCICStatus INTEGER,
+prvtCESCICState INTEGER
+}
+
+prvtCESCICModuleId OBJECT-TYPE
+SYNTAX Integer32 (1..255)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Slot of CES module installed."
+::= {prvtCESCICEntry 1}
+
+prvtCESCICNumber OBJECT-TYPE
+SYNTAX Gauge32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+" An integer uniquely identifying a Clock Input Controller."
+::= {prvtCESCICEntry 2}
+
+prvtCESCICClockNumber OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates the index of the clock
+the clock input controller belongs to"
+::= {prvtCESCICEntry 3}
+
+prvtCESCICMode OBJECT-TYPE
+SYNTAX INTEGER {
+freeRun (1),
+acquisition (2),
+normal (3),
+holdover (4),
+fastAcquisiton (5)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The mode of the clock input controller. Not
+all clock input controllers support all modes.
+The clock input controller status is 'locked'
+only if the clock input controller is in
+'normal' mode."
+::= {prvtCESCICEntry 4}
+
+prvtCESCICTdmPort OBJECT-TYPE
+SYNTAX Integer32 (0..4)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"If the clock input controller recovers a clock
+from a port , this variable indicates the
+TDM Port. Otherwise, it must
+be set to zero."
+::= {prvtCESCICEntry 5}
+
+prvtCESCICCircuit OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"If the clock input controller recovers a clock
+from a circuit, this variable indicates the
+circuit ID. Otherwise, it
+must be set to zero."
+::= {prvtCESCICEntry 6}
+
+prvtCESCICStatus OBJECT-TYPE
+SYNTAX INTEGER {
+locked (1),
+notlocked (2),
+sourceInputLost (3),
+sourceInputDegraded (4),
+sourceTraceLost (5),
+sourceTraceDegraded (6),
+sourceFreqOffsetFailure (7),
+recoveredClockDegraded (8),
+localReferenceFailure (9),
+remoteReferenceFailure (10)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The status of the input reference.Reference
+is ok when the status is 'locked'. Otherwise,
+the status is 'notLocked'. Alternatively, if an
+error was detected at the input, the status
+indicates this error."
+::= {prvtCESCICEntry 7}
+
+prvtCESCICState OBJECT-TYPE
+SYNTAX INTEGER {
+active (1),
+backup (2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The state is set to 'active' if the input
+controller was selected by the clock to drive
+the clock output. At least one input out of
+the clock-input-controllers attached to a
+clock must be in an 'active' state at any given
+time"
+::= {prvtCESCICEntry 8}
+
+--
+--
+--
+prvtCESCICMappTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCESCICMappEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains clock configuration and status monitoring information."
+::= { prvtCESObjects 7 }
+
+prvtCESCICMappEntry OBJECT-TYPE
+SYNTAX PrvtCESCICMappEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"prvtCESCICMappEntry"
+INDEX {prvtCESCICMappModuleId,prvtCESCICMappClockNumber,prvtCESCICMappCICNumber}
+::= { prvtCESCICMappTable 1 }
+
+PrvtCESCICMappEntry ::= SEQUENCE {
+prvtCESCICMappModuleId Integer32,
+prvtCESCICMappClockNumber Gauge32,
+prvtCESCICMappCICNumber Gauge32,
+prvtCESCICMappState INTEGER
+}
+
+prvtCESCICMappModuleId OBJECT-TYPE
+SYNTAX Integer32 (1..255)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Slot of CES module installed."
+::= {prvtCESCICMappEntry 1}
+
+prvtCESCICMappClockNumber OBJECT-TYPE
+SYNTAX Gauge32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Index for the conceptual row
+identifying a clock within this
+mapping table"
+::= {prvtCESCICMappEntry 2}
+
+prvtCESCICMappCICNumber OBJECT-TYPE
+SYNTAX Gauge32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Index for the conceptual row
+identifying a clock input within
+this mapping table"
+::= {prvtCESCICMappEntry 3}
+
+prvtCESCICMappState OBJECT-TYPE
+SYNTAX INTEGER {
+active (1),
+backup (2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The state is set to 'active' if the input
+controller was selected by the clock to drive
+the clock output. At least one input out of
+the clock-input-controllers attached to a
+clock must be in an 'active' state at any given
+time This value of this variable is
+equal to the prvtCESCICState
+variable in the CIC table"
+::= {prvtCESCICMappEntry 4}
+
+prvtCESApsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCESApsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains objects needed APS configuration"
+::= { prvtCESObjects 8 }
+
+prvtCESApsEntry OBJECT-TYPE
+SYNTAX PrvtCESApsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"prvtCESApsEntry"
+INDEX {prvtCESModuleId}
+::= { prvtCESApsTable 1 }
+
+PrvtCESApsEntry ::= SEQUENCE {
+	prvtCESApsModuleId Integer32,
+	prvtCESApsEnable INTEGER,
+	prvtCESApsActiveLine Integer32,
+	prvtSdBerThreshold Integer32,
+	prvtSfBerThreshold Integer32
+}
+
+prvtCESApsModuleId OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An integer uniquely identifying slot of the CES module installed"
+::= {prvtCESApsEntry 1}
+
+prvtCESApsEnable OBJECT-TYPE
+SYNTAX INTEGER {
+enable (1),
+disable (2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enable/Disable Automatic Protection Switching"
+DEFVAL { enable }
+::= {prvtCESApsEntry 2}
+
+prvtCESApsActiveLine OBJECT-TYPE
+SYNTAX Integer32(1..2)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"APS active line"
+::= {prvtCESApsEntry 3}
+
+prvtSdBerThreshold OBJECT-TYPE
+SYNTAX Integer32(5..9)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The Signal Degrade Bit Error Rate.
+The negated value of this number is used
+as the exponent of 10 for computing the
+threshold value for the Bit Error Rate
+(BER). For example, a value of 5 indicates
+a BER threshold of 10^-5."
+::= {prvtCESApsEntry 4}
+
+prvtSfBerThreshold OBJECT-TYPE
+SYNTAX Integer32(3..5)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The Signal Failure Bit Error Rate.
+The negated value of this number is used
+as the exponent of 10 for computing the
+threshold value for the Bit Error Rate
+(BER). For example, a value of 5 indicates
+a BER threshold of 10^-5."
+::= {prvtCESApsEntry 5}
+
+prvtCESUpdateFirmwareTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCESUpdateFirmwareEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object needed in update firmware of CES module"
+::= { prvtCESObjects 9 }
+
+prvtCESUpdateFirmwareEntry OBJECT-TYPE
+SYNTAX PrvtCESUpdateFirmwareEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"prvtCESUpdateFirmwareEntry"
+INDEX {prvtCESModuleId}
+::= { prvtCESUpdateFirmwareTable 1 }
+
+PrvtCESUpdateFirmwareEntry ::= SEQUENCE {
+prvtCESModuleId Integer32,
+prvtCESFirmwareImageName OCTET STRING,
+prvtCESUpdateAction INTEGER,
+prvtCESUpdateStatus INTEGER,
+prvtCESTFTPServer IpAddress
+}
+
+prvtCESModuleId OBJECT-TYPE
+SYNTAX Integer32 (1..32000)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An integer uniquely identifying slot of the CES module installed"
+::= {prvtCESUpdateFirmwareEntry 1}
+
+prvtCESFirmwareImageName OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Name of the firmware image file "
+::= {prvtCESUpdateFirmwareEntry 2}
+
+prvtCESUpdateAction OBJECT-TYPE
+SYNTAX INTEGER {
+none	(1),
+update (2),
+updateThroughUART (3)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Update CES firmware "
+::= {prvtCESUpdateFirmwareEntry 3}
+
+prvtCESUpdateStatus OBJECT-TYPE
+SYNTAX INTEGER {
+updateStatusUnknown (1),
+updateSuccess (2),
+updateInProgress (3),
+updateFailed (4)
+
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The status of the last update procedure, if any. This
+	object will have a value of updateStatusUnknown(2) if no
+	update process has been performed."
+::= {prvtCESUpdateFirmwareEntry 4}
+
+prvtCESTFTPServer OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"IP Address of Tftp Server"
+::= {prvtCESUpdateFirmwareEntry 5}
+
+prvtCESDsx1Alarm NOTIFICATION-TYPE
+OBJECTS {prvtCESDsx1AlarmVariable,prvtCESDsx1AlarmThreshold,prvtCESDsx1AlarmValue}
+STATUS current
+DESCRIPTION
+"This notification is sent when the value of a TDM port error condition statistic has exceeded the
+configured threshold."
+::= {prvtCESNotifications 1}
+
+prvtCESModuleAvailable NOTIFICATION-TYPE
+OBJECTS {prvtCESModuleIndex}
+STATUS current
+DESCRIPTION
+"prvtCESModuleAvailable trap"
+::= {prvtCESNotifications 2}
+
+prvtCESModuleUnAvailableDueExtract NOTIFICATION-TYPE
+OBJECTS {prvtCESModuleIndex}
+STATUS current
+DESCRIPTION
+"prvtCESModuleUnAvailableDueExtract trap."
+::= {prvtCESNotifications 3}
+
+prvtCESModuleUnAvailableDueReload NOTIFICATION-TYPE
+OBJECTS {prvtCESModuleIndex}
+STATUS current
+DESCRIPTION
+"prvtCESModuleUnAvailableDueReload trap"
+::= {prvtCESNotifications 4}
+--
+-- Conformance Information
+--
+
+prvtCESDsx1Compliances OBJECT IDENTIFIER ::= { prvtCESConformance 1 }
+prvtCESDsx1Groups OBJECT IDENTIFIER ::= { prvtCESConformance 2 }
+
+-- compliance statements
+prvtCESDsx1Compliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for management of TDM ports."
+MODULE -- this module
+MANDATORY-GROUPS {
+prvtCESDsx1NotificationsGroup,
+prvtCESDsx1ROGroup
+}
+::= { prvtCESDsx1Compliances 1 }
+
+prvtCESDsx1NotificationsGroup NOTIFICATION-GROUP
+NOTIFICATIONS { prvtCESDsx1Alarm }
+STATUS current
+DESCRIPTION
+"The group of supported notifications."
+::= { prvtCESDsx1Groups 1 }
+prvtCESDsx1ROGroup OBJECT-GROUP
+OBJECTS { prvtCESE1Impedance,
+prvtCEST1GainLimit,
+prvtCESModuleLineType,
+prvtCESModuleTxClock,
+prvtCESModuleConfig,
+prvtCESModuleIPAddress,
+prvtCESModuleIPAddressMask,
+prvtCESModuleGateway,
+prvtCESDsx1AlarmThreshold
+}
+STATUS current
+DESCRIPTION
+"The group of objects with MAX-ACCESS read-write supported with read-only access for the first release."
+::= { prvtCESDsx1Groups 2 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-CFM-MIB b/MIBS/telco-systems/binos/PRVT-CFM-MIB
new file mode 100644
index 0000000..a39920c
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-CFM-MIB
@@ -0,0 +1,1164 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-CFM-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-CFM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+	NOTIFICATION-TYPE,
+	Unsigned32               FROM SNMPv2-SMI    -- [RFC2578]
+DisplayString,
+RowStatus,
+TruthValue,
+MacAddress
+FROM SNMPv2-TC -- [RFC2579]
+
+Dot1afCfmIndexIntegerNextFree,
+Dot1agCfmMDLevelOrNone,
+dot1agCfmMaCompEntry,
+dot1agCfmMepEntry,
+dot1agCfmLtrEntry,
+dot1agCfmMdIndex,
+dot1agCfmMaIndex,
+dot1agCfmMepIdentifier,
+dot1agCfmMepDbRMepIdentifier
+FROM IEEE8021-CFM-MIB
+
+switch
+FROM PRVT-SWITCH-MIB
+
+VlanId FROM Q-BRIDGE-MIB -- [RFC4363]
+;
+
+prvtCfmMib MODULE-IDENTITY
+LAST-UPDATED "201101180000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+DESCRIPTION
+"Prvt extension of Connectivity Fault Management module for managing IEEE 802.1ag"
+
+
+-- revision history
+REVISION "201209120000Z"
+DESCRIPTION
+"Added prvtCfmMepManageCCMTLV"
+REVISION "201104180000Z"
+DESCRIPTION
+"Added prvtCfmMepSuportedRemoteMepsNo"
+REVISION "201101180000Z"
+DESCRIPTION
+"Added AIS/LCK traps"
+REVISION "201007080000Z"
+DESCRIPTION
+"Added prvtCfmMaAisLckVlan table"
+REVISION "201004080000Z"
+DESCRIPTION
+"Changed description for prvtCfmMepAisCondition"
+REVISION "201003170000Z"
+DESCRIPTION
+"Add posibility to enable/disable 1wJitter, 2wJitter, FrameLoss and Latency
+on a CFM profile."
+REVISION "200906200000Z"
+DESCRIPTION
+"Fixed some minor description issues, removed prvtCfmProfileFrameLossBucketSize"
+REVISION "200808190000Z"
+DESCRIPTION
+"Added prvtCfmMepTransmitLbmSuccessRate, prvtCfmMepTransmitLbmMinTime,
+prvtCfmMepTransmitLbmAvgTime, prvtCfmMepTransmitLbmMaxTime,
+prvtCfmLbrBadMsdu."
+REVISION "200806240000Z"
+DESCRIPTION
+"Added prvtCfmStatus"
+REVISION "200801200000Z"
+DESCRIPTION
+"Initial"
+::= { switch 131 }
+
+prvtCfmMibNotifications OBJECT IDENTIFIER ::= { prvtCfmMib 0 }
+prvtCfmMibObjects OBJECT IDENTIFIER ::= { prvtCfmMib 1 }
+prvtCfmMibConformance OBJECT IDENTIFIER ::= { prvtCfmMib 2 }
+
+prvtCfmUpdateInterval OBJECT-TYPE
+SYNTAX Unsigned32 (0..65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Time between monitoring parameters update (in seconds).
+A value of 0 suspends the monitoring task and a
+value different from 0 resumes it. Default is 20 seconds."
+DEFVAL { 20 }
+::= { prvtCfmMibObjects 1 }
+
+prvtCfmStatus OBJECT-TYPE
+SYNTAX INTEGER {
+enable ( 1 ),
+disable ( 2 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enable/disable cfm."
+::= { prvtCfmMibObjects 2 }
+
+prvtCfmProfile OBJECT IDENTIFIER ::= { prvtCfmMibObjects 3 }
+
+prvtCfmProfileTableNextIndex OBJECT-TYPE
+SYNTAX Dot1afCfmIndexIntegerNextFree
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object contains an unused value for prvtCfmProfileIndex in
+the prvtCfmProfileTable, or a zero to indicate that none exist."
+::= { prvtCfmProfile 1 }
+
+-- ----------------------------------------------------
+-- ----------------------------------------------------
+
+prvtCfmProfileTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCfmProfileEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Table contains loopback results from all remote MEPs in the MA."
+::= { prvtCfmProfile 2 }
+
+prvtCfmProfileEntry OBJECT-TYPE
+SYNTAX PrvtCfmProfileEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "a"
+INDEX { prvtCfmProfileIndex }
+::= { prvtCfmProfileTable 1 }
+
+PrvtCfmProfileEntry ::= SEQUENCE {
+prvtCfmProfileIndex Unsigned32,
+prvtCfmProfileName DisplayString,
+prvtCfmProfilePriority Unsigned32,
+prvtCfmProfileRate Unsigned32,
+prvtCfmProfileSize Unsigned32,
+prvtCfmProfileBucketSize Unsigned32,
+prvtCfmProfile1wJitterError Unsigned32,
+prvtCfmProfile1wJitterWarning Unsigned32,
+prvtCfmProfileJitterError Unsigned32,
+prvtCfmProfileJitterErrorPeriod Unsigned32,
+prvtCfmProfileJitterWarning Unsigned32,
+prvtCfmProfileJitterWarningPeriod Unsigned32,
+prvtCfmProfileFrameLossError Unsigned32,
+prvtCfmProfileFrameLossWarning Unsigned32,
+prvtCfmProfileLatencyError Unsigned32,
+prvtCfmProfileLatencyErrorPeriod Unsigned32,
+prvtCfmProfileLatencyWarning Unsigned32,
+prvtCfmProfileLatencyWarningPeriod Unsigned32,
+prvtCfmProfileRowStatus RowStatus,
+prvtCfmProfile1wJitterEnable TruthValue,
+prvtCfmProfileJitterEnable TruthValue,
+prvtCfmProfileFrameLossEnable TruthValue,
+prvtCfmProfileLatencyEnable TruthValue
+}
+
+prvtCfmProfileIndex OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Table index."
+::= { prvtCfmProfileEntry 1 }
+
+prvtCfmProfileName OBJECT-TYPE
+SYNTAX DisplayString (SIZE(1..20))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Profile name."
+::= { prvtCfmProfileEntry 2 }
+
+prvtCfmProfilePriority OBJECT-TYPE
+SYNTAX Unsigned32 (0..7)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"802.1p class-of-service setting."
+DEFVAL { 0 }
+::= { prvtCfmProfileEntry 3 }
+
+prvtCfmProfileRate OBJECT-TYPE
+SYNTAX Unsigned32 (1..3)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Number of Request packets to send each time."
+DEFVAL { 1 }
+::= { prvtCfmProfileEntry 4 }
+
+prvtCfmProfileSize OBJECT-TYPE
+SYNTAX Unsigned32 (0..1462)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Size of data TLV included in probe packets (in octets)."
+DEFVAL { 0 }
+::= { prvtCfmProfileEntry 5 }
+
+prvtCfmProfileBucketSize OBJECT-TYPE
+SYNTAX Unsigned32 (2..255)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Number of the results to save for results calculation."
+DEFVAL { 20 }
+::= { prvtCfmProfileEntry 6 }
+
+prvtCfmProfile1wJitterError OBJECT-TYPE
+SYNTAX Unsigned32 (1..10000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies one-way jitter error values to monitor in milliseconds."
+DEFVAL { 350 }
+::= { prvtCfmProfileEntry 7 }
+
+prvtCfmProfile1wJitterWarning OBJECT-TYPE
+SYNTAX Unsigned32 (1..10000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies one-way jitter warning values to monitor in milliseconds."
+DEFVAL { 300 }
+::= { prvtCfmProfileEntry 8 }
+
+prvtCfmProfileJitterError OBJECT-TYPE
+SYNTAX Unsigned32 (1..10000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies round-trip jitter error values to monitor in milliseconds."
+DEFVAL { 700 }
+::= { prvtCfmProfileEntry 9 }
+
+prvtCfmProfileJitterErrorPeriod OBJECT-TYPE
+SYNTAX Unsigned32 (1..3600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies the duration jitter occurs in seconds."
+DEFVAL { 90 }
+::= { prvtCfmProfileEntry 10 }
+
+prvtCfmProfileJitterWarning OBJECT-TYPE
+SYNTAX Unsigned32 (1..10000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies round-trip jitter warning values
+to monitor in milliseconds. If set value is greater than the
+jitter-error it means that the warning is disabled."
+DEFVAL { 600 }
+::= { prvtCfmProfileEntry 11 }
+
+prvtCfmProfileJitterWarningPeriod OBJECT-TYPE
+SYNTAX Unsigned32 (1..3600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies the duration jitter occurs in seconds."
+DEFVAL { 180 }
+::= { prvtCfmProfileEntry 12 }
+
+prvtCfmProfileFrameLossError OBJECT-TYPE
+SYNTAX Unsigned32 (0..99)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies round-trip frame-loss error
+values to monitor. The default is
+frame-loss of 10% is reported."
+DEFVAL { 10 }
+::= { prvtCfmProfileEntry 13 }
+
+prvtCfmProfileFrameLossWarning OBJECT-TYPE
+SYNTAX Unsigned32 (0..99)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies round-trip frame-loss warning
+values to monitor. The default is frame-loss
+of 8% is reported. If set value is greater
+than the frame-loss-error it means
+that the warning is disable."
+DEFVAL { 8 }
+::= { prvtCfmProfileEntry 14 }
+
+prvtCfmProfileLatencyError OBJECT-TYPE
+SYNTAX Unsigned32 (1..10000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies round-trip latency error values to monitor in milliseconds."
+DEFVAL { 2000 }
+::= { prvtCfmProfileEntry 15 }
+
+prvtCfmProfileLatencyErrorPeriod OBJECT-TYPE
+SYNTAX Unsigned32 (1..3600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies the duration latency increase occurs in seconds."
+DEFVAL { 90 }
+::= { prvtCfmProfileEntry 16 }
+
+prvtCfmProfileLatencyWarning OBJECT-TYPE
+SYNTAX Unsigned32 (1..10000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies round-trip latency error values to
+monitor in milliseconds. If set value is greater than the
+latency-error it means that the warning is disabled."
+DEFVAL { 1600 }
+::= { prvtCfmProfileEntry 17 }
+
+prvtCfmProfileLatencyWarningPeriod OBJECT-TYPE
+SYNTAX Unsigned32 (1..3600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies the duration latency increase occurs in seconds."
+DEFVAL { 180 }
+::= { prvtCfmProfileEntry 18 }
+
+prvtCfmProfileRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The status of the row.
+The writable columns in a row can not be changed if the row
+is active. All columns must have a valid value before a row
+can be activated.
+"
+::= { prvtCfmProfileEntry 19 }
+
+prvtCfmProfile1wJitterEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A boolean showing if one way jitter calculation is enabled."
+DEFVAL { true }
+::= { prvtCfmProfileEntry 20 }
+
+prvtCfmProfileJitterEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A boolean showing if two way jitter calculation is enabled."
+DEFVAL { true }
+::= { prvtCfmProfileEntry 21 }
+
+prvtCfmProfileFrameLossEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A boolean showing if frame loss calculation is enabled."
+DEFVAL { true }
+::= { prvtCfmProfileEntry 22 }
+
+prvtCfmProfileLatencyEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A boolean showing if latency calculation is enabled."
+DEFVAL { true }
+::= { prvtCfmProfileEntry 23 }
+
+
+prvtCfmProcess OBJECT IDENTIFIER ::= { prvtCfmMibObjects 4 }
+
+prvtCfmProcessTableNextIndex OBJECT-TYPE
+SYNTAX Dot1afCfmIndexIntegerNextFree
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object contains an unused value for prvtCfmProcessIndex in
+the prvtCfmProcessTable, or a zero to indicate that none exists."
+::= { prvtCfmProcess 1 }
+
+-- ----------------------------------------------------
+-- ----------------------------------------------------
+
+prvtCfmProcessTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCfmProcessEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Private extension of dot1agCfmMaNetTable.
+Controls the two-way monitoring process
+for MEP's in the MA."
+::= { prvtCfmProcess 2 }
+
+prvtCfmProcessEntry OBJECT-TYPE
+SYNTAX PrvtCfmProcessEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "a"
+INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, prvtCfmProcessIndex }
+::= { prvtCfmProcessTable 1 }
+
+PrvtCfmProcessEntry ::= SEQUENCE {
+prvtCfmProcessIndex Unsigned32,
+prvtCfmProcessProfileIndex Unsigned32,
+prvtCfmProcessName OCTET STRING,
+prvtCfmProcessStatus TruthValue,
+prvtCfmProcessRepeatInterval Unsigned32,
+prvtCfmProcessPacketType INTEGER,
+prvtCfmProcessUnreturnedPkts Unsigned32,
+prvtCfmProcessRowStatus RowStatus
+}
+
+prvtCfmProcessIndex OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Table index."
+::= { prvtCfmProcessEntry 1 }
+
+prvtCfmProcessProfileIndex OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Index of the monitoring profile to be used."
+DEFVAL { 1 }
+::= { prvtCfmProcessEntry 2 }
+
+prvtCfmProcessName OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE(1..20))
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The name of the process. Should be unique per domain/MA"
+::= { prvtCfmProcessEntry 3 }
+
+prvtCfmProcessStatus OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enable/disable two-way monitoring process for MEP's in the MA."
+DEFVAL { true }
+::= { prvtCfmProcessEntry 4 }
+
+prvtCfmProcessRepeatInterval OBJECT-TYPE
+SYNTAX Unsigned32 (1..420)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Repeating frequency of the monitoring process."
+DEFVAL { 60 }
+::= { prvtCfmProcessEntry 5 }
+
+prvtCfmProcessPacketType OBJECT-TYPE
+SYNTAX INTEGER {
+cfm (1),
+y1731 (2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Use CFM Loopback or Y.1731 LMMs and DMMs packets."
+DEFVAL { cfm }
+::= { prvtCfmProcessEntry 6 }
+
+prvtCfmProcessUnreturnedPkts OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of requests for which a reply hasn't been
+received. These packets will be counted as lost
+when they enter timeout."
+DEFVAL { 0 }
+::= { prvtCfmProcessEntry 7 }
+
+prvtCfmProcessRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The status of the row.
+The writable columns in a row can not be changed if the row
+is active. All columns must have a valid value before a row
+can be activated."
+::= { prvtCfmProcessEntry 8 }
+
+-- ------------------------------------------------
+-- ------------------------------------------------
+
+prvtCfmProcessResult OBJECT IDENTIFIER ::= { prvtCfmMibObjects 5 }
+
+prvtCfmProcessResultTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCfmProcessResultEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Table contains process results."
+::= { prvtCfmProcessResult 1 }
+
+prvtCfmProcessResultEntry OBJECT-TYPE
+SYNTAX PrvtCfmProcessResultEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "a"
+INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex,
+prvtCfmProcessIndex, dot1agCfmMepDbRMepIdentifier }
+::= { prvtCfmProcessResultTable 1 }
+
+PrvtCfmProcessResultEntry ::= SEQUENCE {
+prvtCfmProcessResultOneWayJitter Unsigned32,
+prvtCfmProcessResultTwoWayJitter Unsigned32,
+prvtCfmProcessResultLatency Unsigned32,
+prvtCfmProcessResultFrameloss Unsigned32
+}
+
+prvtCfmProcessResultOneWayJitter OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"One way jitter calculated for a specific remote MEP in milliseconds"
+::= { prvtCfmProcessResultEntry 1 }
+
+prvtCfmProcessResultTwoWayJitter OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Two way jitter calculated for a specific remote MEP in milliseconds"
+::= { prvtCfmProcessResultEntry 2 }
+
+prvtCfmProcessResultLatency OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Two way latency calculated for a specific remote MEP
+in milliseconds"
+::= { prvtCfmProcessResultEntry 3 }
+
+prvtCfmProcessResultFrameloss OBJECT-TYPE
+SYNTAX Unsigned32 (0..10000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Two way frameloss calculated for a specific remote MEP
+in units of hundredths of percent.
+Note: When prvtCfmProcessResultFrameloss has value of 10000, all the values of
+prvtCfmProcessResultOneWayJitter, prvtCfmProcessResultTwoWayJitter and
+prvtCfmProcessResultLatency are irrelevant."
+::= { prvtCfmProcessResultEntry 4 }
+
+-- ------------------------------------------------
+-- ------------------------------------------------
+
+prvtCfmMa OBJECT IDENTIFIER ::= { prvtCfmMibObjects 6 }
+
+prvtCfmMaTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCfmMaEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Table includes extra variables needed for Y.1731
+support and service awareness"
+::= { prvtCfmMa 1 }
+
+prvtCfmMaEntry OBJECT-TYPE
+SYNTAX PrvtCfmMaEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "a"
+AUGMENTS { dot1agCfmMaCompEntry }
+::= { prvtCfmMaTable 1 }
+
+PrvtCfmMaEntry ::= SEQUENCE {
+prvtCfmMaCompAisLckEnabled TruthValue,
+prvtCfmMaCompAisLckLevel Dot1agCfmMDLevelOrNone,
+prvtCfmMaCompAisLckInterval INTEGER,
+prvtCfmMaCompAisLckPriority Unsigned32,
+prvtCfmMaCompServiceId Unsigned32,
+prvtCfmMaCompNumberOfServices Unsigned32,
+prvtCfmMaCompClearConnectivity Unsigned32
+}
+
+prvtCfmMaCompAisLckEnabled OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Turn the AIS & LCK features on/off."
+DEFVAL { false }
+::= { prvtCfmMaEntry 1 }
+
+prvtCfmMaCompAisLckLevel OBJECT-TYPE
+SYNTAX Dot1agCfmMDLevelOrNone
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+	"The MD level at which AIS & LCK frames will be sent.
+	It should be greater then that of the current domain.
+	The default value is '-1' representing 'not-configured'."     
+DEFVAL {-1}
+::= { prvtCfmMaEntry 2 }
+
+prvtCfmMaCompAisLckInterval OBJECT-TYPE
+SYNTAX INTEGER {
+interval1s (1),
+interval1min (2) }
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The time interval at which AIS and LCK frames will be sent"
+DEFVAL { interval1s }
+::= { prvtCfmMaEntry 3 }
+
+prvtCfmMaCompAisLckPriority OBJECT-TYPE
+SYNTAX Unsigned32 (0..7)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"COS parameter for the outgoing AIS & LCK frames.
+ The default value is '6'"
+DEFVAL { 6 }
+::= { prvtCfmMaEntry 4 }
+
+prvtCfmMaCompServiceId OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The primary service ID attached to this MA"
+DEFVAL { 0 }
+::= { prvtCfmMaEntry 5 }
+
+prvtCfmMaCompNumberOfServices OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of services attached to this MA"
+DEFVAL { 1 }
+::= { prvtCfmMaEntry 6 }
+
+prvtCfmMaCompClearConnectivity OBJECT-TYPE
+SYNTAX Unsigned32 (0..8191)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Number of MEP or 0 for all"
+DEFVAL { 0 }
+::= { prvtCfmMaEntry 7 }
+
+-- ----------------------------------------------------
+-- ----------------------------------------------------
+
+prvtCfmMep OBJECT IDENTIFIER ::= { prvtCfmMibObjects 7 }
+
+prvtCfmMepTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCfmMepEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "a"
+::= { prvtCfmMep 1 }
+
+prvtCfmMepEntry OBJECT-TYPE
+SYNTAX PrvtCfmMepEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "a"
+AUGMENTS { dot1agCfmMepEntry }
+::= { prvtCfmMepTable 1 }
+
+PrvtCfmMepEntry ::= SEQUENCE {
+prvtCfmMepAlarmSupressed TruthValue,
+prvtCfmMepAisCondition TruthValue,
+prvtCfmMepLckCondition TruthValue,
+prvtCfmMepAisLifetime INTEGER,
+prvtCfmMepLckLifetime INTEGER,
+prvtCfmMepTransmitMcastLbm TruthValue,
+prvtCfmMepTransmitLbmInfinite TruthValue,
+prvtCfmMepTransmitLbmDelay Unsigned32,
+prvtCfmMepTransmitLbmTimeout Unsigned32,
+prvtCfmMepTransmitLtmTimeout Unsigned32,
+prvtCfmMepTransmitLbmSentPkts Unsigned32,
+prvtCfmMepTransmitLbmSuccessRate Unsigned32,
+prvtCfmMepTransmitLbmMinTime Unsigned32,
+prvtCfmMepTransmitLbmAvgTime Unsigned32,
+prvtCfmMepTransmitLbmMaxTime Unsigned32,
+prvtCfmMepSuportedRemoteMepsNo INTEGER,
+prvtCfmMepExcludeCCMTLV DisplayString
+}
+
+prvtCfmMepAlarmSupressed OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"A boolean showing if an AIS or LCK packet
+was received from a lower level"
+DEFVAL { false }
+::= { prvtCfmMepEntry 1 }
+
+prvtCfmMepAisCondition OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"A boolean showing if there is AIS condition. The value of the object is true (an AIS condition), when
+there is a  detection of signal-fail condition at a Server layer or reception of AIS at a server (sub-) layer MEP [AIS condition/Rec.
+ITU-T Y.1731].
+The AIS condition will exit when following criteria is met: During an interval equal to 3.5 times the AIS transmission
+period indicated in the AIS frames received earlier, the MEP does not receive AIS frames or, when ETH-CC is used,
+upon clearing of LOC defect at MEP /Appendix I/Rec. ITU-T Y.1731.
+If prvtCfmMaCompAisLckLevel is configured the MEP should send AIS packets."
+DEFVAL { false }
+::= { prvtCfmMepEntry 2 }
+
+prvtCfmMepLckCondition OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"A boolean showing if the MEP should lock the service
+towards the client and send LCK packets"
+DEFVAL { false }
+::= { prvtCfmMepEntry 3 }
+
+prvtCfmMepAisLifetime OBJECT-TYPE
+SYNTAX INTEGER {
+		nolifetime    (0),
+lifetime35s (1),
+lifetime35min (2) }
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+	"The lifetime of the last received AIS packet.
+	During an interval equal to 3.5 times the AIS transmission period indicated
+	in the AIS frames received earlier, the MEP does not receive AIS frames.
+	The value is valid (non-zero) if AIS packets are being received."
+::= { prvtCfmMepEntry 4 }
+
+prvtCfmMepLckLifetime OBJECT-TYPE
+SYNTAX INTEGER {
+		nolifetime    (0),
+lifetime35s (1),
+lifetime35min (2) }
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+	"The lifetime of the last received LCK packet.
+	During an interval equal to 3.5 times the LCK transmission period indicated
+	in the LCK frames received earlier, the MEP does not receive LCK frames.
+	The value is valid (non-zero) if AIS packets are being received."
+::= { prvtCfmMepEntry 5 }
+
+prvtCfmMepTransmitMcastLbm OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A boolean to control sending Y.1731 multicast loopback."
+DEFVAL { false }
+::= { prvtCfmMepEntry 6 }
+
+prvtCfmMepTransmitLbmInfinite OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A boolean to control sending LBMs continuously until the
+operation is explicitly stopped by setting this back to false"
+DEFVAL { false }
+::= { prvtCfmMepEntry 7 }
+
+prvtCfmMepTransmitLbmDelay OBJECT-TYPE
+SYNTAX Unsigned32 (0..60)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"An amount of time to wait between sent LBMs (in seconds)."
+DEFVAL { 1 }
+::= { prvtCfmMepEntry 8 }
+
+prvtCfmMepTransmitLbmTimeout OBJECT-TYPE
+SYNTAX Unsigned32 (1..60)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"An amount of time to wait after the last sent LBM if no
+LBR is received (in seconds)."
+DEFVAL { 5 }
+::= { prvtCfmMepEntry 9 }
+
+prvtCfmMepTransmitLtmTimeout OBJECT-TYPE
+SYNTAX Unsigned32 (1..60)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"An amount of time to wait after the last sent LTM if no
+LTR is received (in seconds)."
+DEFVAL { 5 }
+::= { prvtCfmMepEntry 10 }
+
+prvtCfmMepTransmitLbmSentPkts OBJECT-TYPE
+SYNTAX Unsigned32 (1..1024)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of successfully sent packets in the current LBM
+session."
+::= { prvtCfmMepEntry 11 }
+
+prvtCfmMepTransmitLbmSuccessRate OBJECT-TYPE
+SYNTAX Unsigned32 (1..10000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Success rate of the current LBM session (in percentage*100)."
+::= { prvtCfmMepEntry 12 }
+
+prvtCfmMepTransmitLbmMinTime OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Minimum LBR response time (in msec)."
+::= { prvtCfmMepEntry 13 }
+
+prvtCfmMepTransmitLbmAvgTime OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Average LBR response time (in msec)."
+::= { prvtCfmMepEntry 14 }
+
+prvtCfmMepTransmitLbmMaxTime OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Maximum LBR response time (in msec)."
+::= { prvtCfmMepEntry 15 }
+
+prvtCfmMepSuportedRemoteMepsNo OBJECT-TYPE
+SYNTAX INTEGER{
+remoteMeps8 (8),
+remoteMeps16 (16),
+remoteMeps24 (24),
+remoteMeps32 (32)
+} 
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The number of suported remote meps (for TMarc3x0 and TMarc280 devices)"
+DEFVAL {remoteMeps8}
+::= { prvtCfmMepEntry 16 }
+
+prvtCfmMepExcludeCCMTLV OBJECT-TYPE
+SYNTAX DisplayString (SIZE(2))
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Bitmask that specifies what TLVs should be  excluded(for TMarc3x0 and TMarc280 devices):
+	   On set opertaion:
+	   BIT4 =  MSB Include/Exclude bit - if it is 1 the tlv is excluded from the specific CCM packet,if it is 0 the tlv will be included in the specific CCM packet
+	   BIT3 =      If set 1 the OrgSpecific TLV will be  excluded or included 
+	   BIT2 =      If set 1 the InterfaceStatus TLV will be excluded or included
+	   BIT1 = 	   If set 1 the PortStatus TLV will be excluded or included
+	   BIT0 =  LSB If set 1 the Sender ID TLV will be excluded or included 
+	   Examples: 
+	    If Interface Status and Port Status will be excluded the bitmask will look like this:
+	   16 in hexadecimal BIT4 BIT3 BIT2 BIT1 BIT0 
+						  1     0    1     1   0
+		If Interface Status and Port Status will be included the bitmask will look like this:
+	    06 in hexadecimal BIT4 BIT3 BIT2 BIT1 BIT0 
+						  0     0    1     1   0
+		On get operation it shows the bits corresponding to the  excluded tlvs
+		If Interface Status and Port Status are excluded:
+		 06 in hexadecimal - 0    1     1   0 
+	    "
+	::= { prvtCfmMepEntry 17 }
+
+-- ------------------------------------------------
+-- ------------------------------------------------
+
+prvtCfmLbrTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCfmLbrEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Table contains loopback results following the last loopback operation."
+::= { prvtCfmMep 2 }
+
+prvtCfmLbrEntry OBJECT-TYPE
+SYNTAX PrvtCfmLbrEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "a"
+INDEX { dot1agCfmMdIndex, dot1agCfmMaIndex, dot1agCfmMepIdentifier,
+prvtCfmLbrSeqNumber, prvtCfmLbrReceiveOrder }
+::= { prvtCfmLbrTable 1 }
+
+PrvtCfmLbrEntry ::= SEQUENCE {
+prvtCfmLbrSeqNumber Unsigned32,
+prvtCfmLbrReceiveOrder Unsigned32,
+prvtCfmLbrTime Unsigned32,
+prvtCfmLbrMacAddress MacAddress,
+prvtCfmLbrBadMsdu TruthValue
+}
+
+prvtCfmLbrSeqNumber OBJECT-TYPE
+SYNTAX Unsigned32 (0..4294967295)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Transaction identifier/Sequence number of the received LBR."
+::= { prvtCfmLbrEntry 1}
+
+prvtCfmLbrReceiveOrder OBJECT-TYPE
+SYNTAX Unsigned32 (1..4294967295)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An index to distinguish among multiple LBRs with the same LBR
+Transaction Identifier field value. This situation can appear
+in the case of multicast loopback.
+"
+::= { prvtCfmLbrEntry 2 }
+
+prvtCfmLbrTime OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Remote MEPs response time in milliseconds."
+::= { prvtCfmLbrEntry 3 }
+
+prvtCfmLbrMacAddress OBJECT-TYPE
+SYNTAX MacAddress
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Remote MEPs mac address. For unicast loopback
+this is the same as dot1agCfmMepTransmitLbmDestMacAddress,
+but for multicast loopback there will be different entries."
+::= { prvtCfmLbrEntry 4 }
+
+prvtCfmLbrBadMsdu OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Result of the Data TLV verification."
+::= { prvtCfmLbrEntry 5 }
+
+-- ------------------------------------------------
+-- ------------------------------------------------
+
+prvtCfmLtrTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCfmLtrEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table adds the possibility to measure the response
+time to a linktrace request."
+::= { prvtCfmMep 3 }
+
+prvtCfmLtrEntry OBJECT-TYPE
+SYNTAX PrvtCfmLtrEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "a"
+AUGMENTS { dot1agCfmLtrEntry }
+::= { prvtCfmLtrTable 1 }
+
+PrvtCfmLtrEntry ::= SEQUENCE {
+prvtCfmLtrTime Unsigned32
+}
+
+prvtCfmLtrTime OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Remote MPs response time in milliseconds."
+::= { prvtCfmLtrEntry 1 }
+
+-- ----------------------------------------------------
+-- ----------------------------------------------------
+
+prvtCfmMaAisLckVlan OBJECT IDENTIFIER ::= { prvtCfmMibObjects 8 }
+
+prvtCfmMaAisLckVlanTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtCfmMaAisLckVlanEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Table includes extra variables needed for AIS/LCK configurable vlans"
+::= { prvtCfmMaAisLckVlan 1 }
+
+prvtCfmMaAisLckVlanEntry OBJECT-TYPE
+SYNTAX PrvtCfmMaAisLckVlanEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Table includes extra variables needed for AIS/LCK configurable vlans"
+INDEX {dot1agCfmMdIndex, dot1agCfmMaIndex, prvtCfmMaAisLckVlanId }
+::= { prvtCfmMaAisLckVlanTable 1 }
+
+PrvtCfmMaAisLckVlanEntry ::= SEQUENCE {
+prvtCfmMaAisLckVlanId        VlanId,
+prvtCfmMaAisLckVlanRowStatus RowStatus
+}
+
+prvtCfmMaAisLckVlanId OBJECT-TYPE
+SYNTAX VlanId
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Vlan ID (towards customer level) that the generated AIS/LCK packets should use."
+::= { prvtCfmMaAisLckVlanEntry 1 }
+
+prvtCfmMaAisLckVlanRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The status of the row."
+::= { prvtCfmMaAisLckVlanEntry 2 }
+
+-- ------------------------------------------------
+-- ------------------------------------------------
+
+-- ***********************************************
+-- **************** Notification *****************
+-- ***********************************************
+
+prvtCfm1wJitterThreshold NOTIFICATION-TYPE
+OBJECTS {
+prvtCfmProcessResultOneWayJitter,
+prvtCfmProfile1wJitterWarning,
+prvtCfmProfile1wJitterError
+}
+STATUS current
+DESCRIPTION
+"This trap should be sent whenever the one way jitter
+on a CFM test will surpass one of the 2 defined thresholds."
+::= { prvtCfmMibNotifications 1 }
+
+prvtCfmJitterThreshold NOTIFICATION-TYPE
+OBJECTS {
+prvtCfmProcessResultTwoWayJitter,
+prvtCfmProfileJitterWarning,
+prvtCfmProfileJitterWarningPeriod,
+prvtCfmProfileJitterError,
+prvtCfmProfileJitterErrorPeriod
+}
+STATUS current
+DESCRIPTION
+"This trap should be sent whenever the two way jitter
+on a CFM test will surpass one of the 2 defined thresholds."
+::= { prvtCfmMibNotifications 2 }
+
+prvtCfmFrameLossThreshold NOTIFICATION-TYPE
+OBJECTS {
+prvtCfmProcessResultFrameloss,
+prvtCfmProfileFrameLossWarning,
+prvtCfmProfileFrameLossError
+}
+STATUS current
+DESCRIPTION
+"This trap should be sent whenever the frame loss
+on a CFM test will surpass one of the 2 defined 
+thresholds."
+::= { prvtCfmMibNotifications 3 }
+
+prvtCfmLatencyThreshold NOTIFICATION-TYPE
+OBJECTS {
+prvtCfmProcessResultLatency,
+prvtCfmProfileLatencyWarning,
+prvtCfmProfileLatencyWarningPeriod,
+prvtCfmProfileLatencyError,
+prvtCfmProfileLatencyErrorPeriod
+}
+STATUS current
+DESCRIPTION
+"This trap should be sent whenever the latency
+on a CFM test will surpass one of the 2 defined 
+thresholds."
+::= { prvtCfmMibNotifications 4 }
+
+prvtCfmAisReceived NOTIFICATION-TYPE
+OBJECTS {
+prvtCfmMepAisLifetime
+}
+STATUS current
+DESCRIPTION
+"This trap is issued whenever an AIS condition with specified lifetime on a MEP is met."
+::= { prvtCfmMibNotifications 5 }
+
+prvtCfmLckReceived NOTIFICATION-TYPE
+OBJECTS {
+prvtCfmMepLckLifetime
+}
+STATUS current
+DESCRIPTION
+"This trap is issued whenever an LCK condition with specified lifetime on a MEP is met."
+::= { prvtCfmMibNotifications 6 }
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-CONFIGCHANGE-MIB b/MIBS/telco-systems/binos/PRVT-CONFIGCHANGE-MIB
new file mode 100644
index 0000000..1fc7238
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-CONFIGCHANGE-MIB
@@ -0,0 +1,158 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-CONFIGCHANGE-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+
+PRVT-CONFIGCHANGE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+NOTIFICATION-TYPE
+FROM SNMPv2-SMI
+
+RowPointer,
+DisplayString
+FROM SNMPv2-TC
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+prvtConfigChangeMIB MODULE-IDENTITY
+LAST-UPDATED "200907130000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"Initial version. This MIB will provied traps for change"
+
+-- Revision history.
+REVISION "200907130000Z"
+DESCRIPTION
+"Add object snmpServerStatus and notification snmpServerStatusChange"
+REVISION "200611200000Z"
+DESCRIPTION
+"Initial release"
+
+::= { switch 150 }
+
+prvtConfigChangeAlarmOID OBJECT-TYPE
+SYNTAX OBJECT IDENTIFIER
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"The configChangeAlarmOID specifies the OID of an object whose value has been changed."
+::= {prvtConfigChangeObjects 1}
+
+prvtConfigChangeAlarmRow OBJECT-TYPE
+SYNTAX RowPointer
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"The configChangeAlarmRow specifies the OID of the row from table, whose entry has been changed."
+::= {prvtConfigChangeObjects 2}
+
+cliConfigChangeNodePrompt OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Shows the CLI prompt."
+::= {prvtConfigChangeObjects 3}
+
+cliConfigChangeCommand OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Shows executed command."
+::= {prvtConfigChangeObjects 4}
+
+snmpServerStatus OBJECT-TYPE
+SYNTAX INTEGER {
+enabled(1),
+disabled(2)
+}
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Shows the enabled/disabled status of the SNMP server."
+::= {prvtConfigChangeObjects 5}
+
+prvtConfigChangeAlarm NOTIFICATION-TYPE
+OBJECTS {prvtConfigChangeAlarmOID, prvtConfigChangeAlarmRow}
+STATUS current
+DESCRIPTION
+"This notification is generated when the value of configurable
+attribute has been changed. The notification can be used
+to trigger maintenance polling of the running configuration
+on the device. One of the varbinds will point either to entry
+of the modified table (configChangeAlarmRow) or the
+OID of the modified scalar object "
+::= { prvtConfigChangeNotifications 1}
+
+cliConfigurationChange NOTIFICATION-TYPE
+OBJECTS {cliConfigChangeNodePrompt,cliConfigChangeCommand}
+STATUS current
+DESCRIPTION
+"This notification is generated when command in configuration node is executed."
+::= { prvtConfigChangeNotifications 2}
+
+snmpServerStatusChange NOTIFICATION-TYPE
+OBJECTS {
+snmpServerStatus
+}
+STATUS current
+DESCRIPTION
+"The notification shall be sent whenever the enabled/disabled status
+of the SNMP server changes. If the status is changed
+from enabled to disabled, the notification shall be sent
+prior to disabling the SNMP server."
+::= {prvtConfigChangeNotifications 3}
+
+prvtConfigChangeNotifications OBJECT IDENTIFIER ::= { prvtConfigChangeMIB 0 }
+prvtConfigChangeObjects OBJECT IDENTIFIER ::= { prvtConfigChangeMIB 1 }
+prvtConfigChangeConformance OBJECT IDENTIFIER ::= { prvtConfigChangeMIB 3 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-CR-LDP-MIB b/MIBS/telco-systems/binos/PRVT-CR-LDP-MIB
new file mode 100644
index 0000000..e2735c8
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-CR-LDP-MIB
@@ -0,0 +1,801 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-CR-LDP-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2006, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-CR-LDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Unsigned32,Integer32
+FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION,
+TruthValue,
+RowStatus
+FROM SNMPv2-TC
+
+InterfaceIndexOrZero
+FROM IF-MIB
+
+ipSwitch
+FROM PRVT-SWITCH-MIB;
+
+prvtCrLdp MODULE-IDENTITY
+LAST-UPDATED "200801010000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+DESCRIPTION
+"The MIB module for management of the PRVT-CR-LDP"
+
+-- revision history
+REVISION "200801010000Z"
+DESCRIPTION
+"Initial"
+
+::= { mpls 3 }
+
+-- MPLS node definition
+
+mpls OBJECT IDENTIFIER ::= { ipSwitch 5 }
+
+prvtCrLdpObjects OBJECT IDENTIFIER ::= { prvtCrLdp 1 } -- tables
+-- Textual Conventions.
+
+PrvtCrldpAdminStatus ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"The value determines the desired administrative
+status of a PRVT-CR-LDP table entry.
+The up and down states indicate that the traffic
+flow is enabled or disabled respectively for the
+protocol."
+SYNTAX INTEGER {
+up(1), -- ready to pass packets
+down(2)
+}
+
+PrvtCrldpOperStatus ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"The value determines the operational status of a
+PRVT-CR-LDP table entry. The up and down states indicate
+that the traffic flow is enabled or disabled respectively."
+SYNTAX INTEGER {
+up(1), -- active
+down(2), -- inactive
+goingUp(3), -- activating
+goingDown(4), -- deactivating
+actFailed(5) -- activation failed
+}
+
+PrvtCrldpIndex ::= TEXTUAL-CONVENTION
+DISPLAY-HINT "d"
+STATUS current
+DESCRIPTION
+"A general purpose SNMP index into the prvtHafEntity table."
+SYNTAX Unsigned32
+
+-- End of textual conventions
+
+-- The PRVT-CR-LDP Signaling MIB. This table is used to create an
+-- instance of PRVT-CR-LDP Signaling, and to change its operational state.
+
+prvtcrldpSigTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtcrldpSigEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The table of active instances of PRVT-CR-LDP Signaling."
+
+::= { prvtCrLdpObjects 1 }
+
+prvtcrldpSigEntry OBJECT-TYPE
+SYNTAX PrvtcrldpSigEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Each of these entries represents an instance of
+PRVT-CR-LDP Signaling running in the HAF. Some of these instances
+will be the primary, and others may be backups."
+INDEX {prvtcrldpSigIndex}
+::= { prvtcrldpSigTable 1 }
+
+PrvtcrldpSigEntry ::= SEQUENCE {
+prvtcrldpSigIndex PrvtCrldpIndex,
+prvtcrldpSigPathManagerIndex PrvtCrldpIndex,
+prvtcrldpSigLsrIndex Unsigned32,
+prvtcrldpSigSocketIfIndex InterfaceIndexOrZero,
+prvtcrldpSigSessionBufPoolSize Integer32,
+prvtcrldpSigEMBufPoolSize Integer32,
+prvtcrldpSigAMBufPoolSize Integer32,
+prvtcrldpSigAdminStatus PrvtCrldpAdminStatus,
+prvtcrldpSigOperStatus PrvtCrldpOperStatus,
+prvtcrldpSigRowStatus RowStatus,
+prvtcrldpSigUseI3Interface TruthValue,
+prvtcrldpSigConformanceFlags BITS,
+prvtcrldpSigUseIPv6Transport TruthValue,
+prvtcrldpSigSessStatusTrapEnable TruthValue,
+prvtcrldpSigSessThreshTrapEnable TruthValue,
+prvtcrldpSigPathVecLimitTrapEnable TruthValue
+}
+
+prvtcrldpSigIndex OBJECT-TYPE
+SYNTAX PrvtCrldpIndex
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The index of this prvtcrldpSigEntry. This is the
+HAF entity index passed on the product create
+parameters."
+::= { prvtcrldpSigEntry 1 }
+
+prvtcrldpSigPathManagerIndex OBJECT-TYPE
+SYNTAX PrvtCrldpIndex
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The index of the Path Manager instance to which this
+instance of Signaling is to join. See prvtcrldpPmTable."
+::= { prvtcrldpSigEntry 2 }
+
+prvtcrldpSigLsrIndex OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The index of the PRVT-LMGR product instance to which this
+PRVT-CR-LDP Signaling is to join as its LDB interface provider.
+See prvtlmgrLsrEntityTable."
+::= { prvtcrldpSigEntry 3 }
+
+prvtcrldpSigSocketIfIndex OBJECT-TYPE
+SYNTAX InterfaceIndexOrZero
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Management assigned interface identifier for the IP Sockets
+component interface to PRVT-CR-LDP Signalling."
+::= { prvtcrldpSigEntry 4 }
+
+prvtcrldpSigSessionBufPoolSize OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The number of pre-reserved buffers available for sending
+sockets and LDI messages for each LDP session. This is used
+to pace the sockets and LDI data flows for each LDP session."
+DEFVAL { 8 }
+::= { prvtcrldpSigEntry 5 }
+
+prvtcrldpSigEMBufPoolSize OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The number of pre-reserved buffers available for sending
+sockets, LDBI, NHR and I3 messages within Entity Manager
+This is used to pace Entity Manager's sockets, LDBI, NHR
+and I3 data flows."
+DEFVAL { 8 }
+::= { prvtcrldpSigEntry 6 }
+
+prvtcrldpSigAMBufPoolSize OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The number of pre-reserved buffers available for sending
+sockets messages within Adjacency Manager. This is used
+to pace Adjacency Manager's sockets data flows."
+DEFVAL { 8 }
+::= { prvtcrldpSigEntry 7 }
+
+prvtcrldpSigAdminStatus OBJECT-TYPE
+SYNTAX PrvtCrldpAdminStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This object is used to activate the PRVT-CR-LDP Signaling instance."
+DEFVAL { up }
+::= { prvtcrldpSigEntry 8 }
+
+prvtcrldpSigOperStatus OBJECT-TYPE
+SYNTAX PrvtCrldpOperStatus
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The current operational status of this instance of
+PRVT-CR-LDP Signaling."
+::= { prvtcrldpSigEntry 9 }
+
+prvtcrldpSigRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Used to create and delete a PRVT-CR-LDP Signaling Table entry.
+When this object is set to 'active', only the
+prvtcrldpSigAdminStatus object in the row may be modified."
+::= { prvtcrldpSigEntry 10 }
+
+prvtcrldpSigUseI3Interface OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Used to indicate whether this PRVT-CR-LDP Signaling instance
+should use the I3 interface or the IPR interface to determine
+information regarding local interface configuration. Use of
+the IPR interface is deprecated, but nevertheless this field
+defaults to its use for back-compatibility reasons."
+DEFVAL { false }
+::= { prvtcrldpSigEntry 11 }
+
+prvtcrldpSigConformanceFlags OBJECT-TYPE
+SYNTAX BITS {
+maxPduLen (0)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Flags specifying how PRVT-LDP Session Controller should
+behave in situations either where the interpretation of
+strict conformance is debatable, or where strictly
+conformant behavior contradicts the general IETF principle
+of being liberal on receipt.
+
+maxPduLen If set, this flag means that PRVT-LDP should
+abort session initialization if the peer (in the passive
+role) proposes a max PDU length that is larger than
+PRVT-LDP's proposed value. The interpretation here is that
+the passive peer's value should be the already negotiated
+value, not its raw value."
+DEFVAL { {} }
+::= { prvtcrldpSigEntry 12 }
+
+prvtcrldpSigUseIPv6Transport OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Used to indicate whether the PRVT-CR-LDP signaling is to use
+IPv6 transport where possible.
+
+Note that if PRVT-LDP is configured with an IPv4 transport
+address, IPv4 transport will be used for multicast and
+IPv6 sockets using a IPv4 mapped IPv6 address will be used
+for unicast when this field is set to True."
+DEFVAL { false }
+::= { prvtcrldpSigEntry 13 }
+
+prvtcrldpSigSessStatusTrapEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"If this object is true, then it enables the generation of
+mplsLdpSessionUp and mplsLdpSessionDown traps, otherwise
+these traps are not generated."
+DEFVAL { false }
+::= { prvtcrldpSigEntry 14 }
+
+prvtcrldpSigSessThreshTrapEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"If this object is true, then it enables the generation of
+mplsLdpInitSessionThresholdExceeded traps, otherwise these
+traps are not generated."
+DEFVAL { false }
+::= { prvtcrldpSigEntry 15 }
+
+prvtcrldpSigPathVecLimitTrapEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"If this object is true, then it enables the generation of
+mplsLdpPathVectorLimitMismatch traps, otherwise these
+traps are not generated."
+DEFVAL { false }
+::= { prvtcrldpSigEntry 16 }
+
+-- The PRVT-CR-LDP Path Manager MIB. This table is used to create an
+-- instance of PRVT-CR-LDP Path Manager, and to change its operational state.
+
+prvtcrldpPmTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtcrldpPmEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The table of active instances of PRVT-CR-LDP Path Manager."
+::= { prvtCrLdpObjects 2 }
+
+prvtcrldpPmEntry OBJECT-TYPE
+SYNTAX PrvtcrldpPmEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Each of these entries represents an instance of
+PRVT-CR-LDP Path Manager running in the HAF. Some of these instances
+will be the primary, and others may be backups."
+INDEX {prvtcrldpPmIndex}
+::= { prvtcrldpPmTable 1 }
+
+PrvtcrldpPmEntry ::= SEQUENCE {
+prvtcrldpPmIndex PrvtCrldpIndex,
+prvtcrldpPmLsrIndex Unsigned32,
+prvtcrldpPmLdpEntityAutoCreate TruthValue,
+prvtcrldpPmLdpEntityAutoStart TruthValue,
+prvtcrldpPmLdpEntityReuse TruthValue,
+prvtcrldpPmLdpVersion INTEGER,
+prvtcrldpPmUseLdpFt TruthValue,
+prvtcrldpPmAsNumber Integer32,
+prvtcrldpPmIprBufPoolSize Integer32,
+prvtcrldpPmLdpSupported TruthValue,
+prvtcrldpPmCrLdpSupported TruthValue,
+prvtcrldpPmQueryFECSupported TruthValue,
+prvtcrldpPmAdminStatus PrvtCrldpAdminStatus,
+prvtcrldpPmOperStatus PrvtCrldpOperStatus,
+prvtcrldpPmRowStatus RowStatus,
+prvtcrldpPmRestartCapable TruthValue,
+prvtcrldpPmReconnectTime Integer32,
+prvtcrldpPmRecoveryTime Integer32,
+prvtcrldpPmMaxPeerReconnect Integer32,
+prvtcrldpPmMaxPeerRecovery Integer32,
+prvtcrldpPmAdjDwnHoldTime Integer32,
+prvtcrldpPmOutSegProgOrder INTEGER,
+prvtcrldpPmSupportIpv6 TruthValue,
+prvtcrldpPmPolicySupportFlags BITS,
+prvtcrldpPmCheckOutSegIntfaceStat TruthValue
+}
+
+prvtcrldpPmIndex OBJECT-TYPE
+SYNTAX PrvtCrldpIndex
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The index of this prvtcrldpPmEntry. This is the
+HAF entity index passed on the product create
+parameters."
+::= { prvtcrldpPmEntry 1 }
+
+prvtcrldpPmLsrIndex OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The index of the PRVT-LMGR product instance to which this
+PRVT-CR-LDP Path Manager is to join as its LDB interface provider.
+See prvtlmgrLsrEntityTable."
+::= { prvtcrldpPmEntry 2 }
+
+prvtcrldpPmLdpEntityAutoCreate OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"When set to 'true', the Entity Manager component of PRVT-CR-LDP
+creates Entities automatically based on interfaces known to
+Entity Manager. When set to 'false' Entities are not
+automatically created."
+DEFVAL { true }
+::= { prvtcrldpPmEntry 3 }
+
+prvtcrldpPmLdpEntityAutoStart OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"When set to 'true', the Entity Manager component of PRVT-CR-LDP
+automatically starts Entities. Both configured and automatically
+created Entities are automatically started. When set to 'false'
+Entities are not automatically started."
+DEFVAL { true }
+::= { prvtcrldpPmEntry 4 }
+
+prvtcrldpPmLdpEntityReuse OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"When set to 'true', the same Entity can be used for multiple
+interfaces. That is, the per-platform label space behaves as
+a per-interface label space. When set to 'false', the same
+entity cannot be used for multiple interfaces."
+DEFVAL { true }
+::= { prvtcrldpPmEntry 5 }
+
+prvtcrldpPmLdpVersion OBJECT-TYPE
+SYNTAX INTEGER {
+version1(1)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"An indication of the LDP version supported."
+DEFVAL { 1 }
+::= { prvtcrldpPmEntry 6 }
+
+prvtcrldpPmUseLdpFt OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"When set to 'true', PRVT-CR-LDP implements fault tolerance
+procedures for LDP and CR-LDP. When set to 'false', fault
+tolerance procedures are not used."
+DEFVAL { false }
+::= { prvtcrldpPmEntry 7 }
+
+prvtcrldpPmAsNumber OBJECT-TYPE
+SYNTAX Integer32(0..65535)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The number identifying the autonomous system (AS) to which
+this node belongs."
+::= { prvtcrldpPmEntry 8 }
+
+prvtcrldpPmIprBufPoolSize OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The size of the buffer pool used for sending either
+(deprecated) IPRI messages or for sending NHR and I3
+messages. This is used to pace IPR/NHR+I3 data flows from
+PM."
+DEFVAL { 8 }
+::= { prvtcrldpPmEntry 9 }
+
+prvtcrldpPmLdpSupported OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"When set to 'true', PRVT-CR-LDP implements LDP
+functionality. When set to 'false' received LDP requests
+are rejected.
+Note that at least one of prvtcrldpPmLdpSupported and
+prvtcrldpPmCrLdpSupported must be set to 'true' before
+activating a prvtcrldpPmTable row. Both prvtcrldpPmLdpSupported
+and prvtcrldpPmCrLdpSupported may be set to 'true'."
+DEFVAL { false }
+::= { prvtcrldpPmEntry 10 }
+
+prvtcrldpPmCrLdpSupported OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"When set to 'true', PRVT-CR-LDP implements CR-LDP
+functionality. When set to 'false' received CR-LDP requests
+are rejected.
+Note that at least one of prvtcrldpPmLdpSupported and
+prvtcrldpPmCrLdpSupported must be set to 'true' before
+activating a prvtcrldpPmTable row. Both prvtcrldpPmLdpSupported
+and prvtcrldpPmCrLdpSupported may be set to 'true'."
+DEFVAL { false }
+::= { prvtcrldpPmEntry 11 }
+
+prvtcrldpPmQueryFECSupported OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"When set to 'true', PRVT-CR-LDP queries the routing stub
+when a label mapping for an unrecognized FEC is received
+to determine whether the FEC should be recognized and the
+corresponding switch programming performed or not. If set
+to 'false' PRVT-CR-LDP creates a dummy FEC for the mapping
+and retains or releases the mapping based on the label
+retention policy for the session."
+DEFVAL { false }
+::= { prvtcrldpPmEntry 12 }
+
+prvtcrldpPmAdminStatus OBJECT-TYPE
+SYNTAX PrvtCrldpAdminStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This object is used to activate the PRVT-CR-LDP Path Manager instance."
+DEFVAL { up }
+::= { prvtcrldpPmEntry 13 }
+
+prvtcrldpPmOperStatus OBJECT-TYPE
+SYNTAX PrvtCrldpOperStatus
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The current operational status of this instance of
+PRVT-CR-LDP Path Manager."
+::= { prvtcrldpPmEntry 14 }
+
+prvtcrldpPmRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Used to create and delete a PRVT-CR-LDP Path Manager Table entry.
+When this object is set to 'active', only the
+prvtcrldpPmAdminStatus object in the row may be modified."
+::= { prvtcrldpPmEntry 15 }
+
+prvtcrldpPmRestartCapable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"A flag to indicate whether the local node should advertise
+itself as LDP restart capable if the Label Switch
+Controller or Label Data Forwarder is capable of
+supporting the required procedures."
+DEFVAL { false }
+::= { prvtcrldpPmEntry 16 }
+
+prvtcrldpPmReconnectTime OBJECT-TYPE
+SYNTAX Integer32(0..2147483647)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The time in milliseconds that the local node takes to
+restart LDP and bring up the LDP sessions.
+This is advertised to neighbors in the FT Session TLV in
+Initialization messages.
+
+The value chosen should be large enough for LDP to be
+terminated and restarted.
+
+Only used if prvtcrldpPmRestartCapable is set to true."
+DEFVAL { 10000 }
+::= { prvtcrldpPmEntry 17 }
+
+prvtcrldpPmRecoveryTime OBJECT-TYPE
+SYNTAX Integer32(0..2147483647)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The period of time in milliseconds that the local node
+is willing to retain its MPLS forwarding state, if any,
+that it preserved across the restart.
+
+The time is from the end of the restart time configured
+above.
+
+Only used if prvtcrldpPmRestartCapable is set to true."
+DEFVAL { 10000 }
+::= { prvtcrldpPmEntry 18 }
+
+prvtcrldpPmMaxPeerReconnect OBJECT-TYPE
+SYNTAX Integer32(0..2147483647)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The maximum period of time in milliseconds that LDP
+should wait for a restart capable neighbor to restore an
+LDP session.
+
+LDP waits for the minimum of this time and the
+Reconnect Timeout advertised in the FT Session TLV in
+the Initialization message from the neighbor.
+
+Only used if prvtcrldpPmRestartCapable is set to true."
+DEFVAL { 10000 }
+::= { prvtcrldpPmEntry 19 }
+
+prvtcrldpPmMaxPeerRecovery OBJECT-TYPE
+SYNTAX Integer32(0..2147483647)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The maximum period of time in milliseconds that LDP
+should wait for a restart capable neighbor to refresh
+Label Mappings previously received from that neighbor
+before deleting the stale bindings.
+
+LDP waits for the minimum of this time and the
+Recovery Time advertised in the FT Session TLV in
+the Initialization message from the neighbor.
+
+Only used if prvtcrldpPmRestartCapable is set to true."
+DEFVAL { 10000 }
+::= { prvtcrldpPmEntry 20 }
+
+prvtcrldpPmAdjDwnHoldTime OBJECT-TYPE
+SYNTAX Integer32(0..2147483647)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The time in milliseconds to hold a failed LDP Hello
+adjacency to distinguish between LDP peer failure
+and interface failure.
+
+This field is used to ensure that LDP retains adjacency
+multi-link LSPs during peer restart recovery when the peer
+restarts and an LDP Hello adjacency goes down before the
+LDP session.
+
+When an LDP Hello adjacency fails, Path Manager waits
+until the adjacency holding timer expires before tearing
+down any LSP out segments associated with the adjacency.
+
+If the LDP session fails before the adjacency holding
+timer expires, Path Manager performs peer restart recovery
+instead of tearing down any LSP out segments.
+
+If the adjacency holding timer expires and the LDP session
+is still active then Path Manager assumes that the
+interface has failed but the peer is still active. In
+this case Path Manager tears down LSP out segments
+associated with the adjacency.
+
+The value chosen should be large enough for the LDP
+session to fail if the LDP peer has failed.
+
+Only used if _restart_capable_ is set to AMB_TRUE, and
+cannot be modified when the _row_status_ is ACTIVE."
+DEFVAL { 3000 }
+::= {prvtcrldpPmEntry 21 }
+
+prvtcrldpPmOutSegProgOrder OBJECT-TYPE
+SYNTAX INTEGER {
+default(0),
+connFirst(1)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This determines the order in which LDP connects and
+releases out segments.
+
+default: This will release all out-segments on a session
+before programming new out-segments on the same session.
+No ordering for out-segments across different sessions is
+enforced when ECMP is in use.
+
+connFirst: This mode forces all the out-segments for an
+LSP to be programmed before any out-segments are released.
+This ordering is only supported if the LSC stub supports
+implicit XCs."
+DEFVAL { default }
+::= {prvtcrldpPmEntry 22 }
+
+prvtcrldpPmSupportIpv6 OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This field indicates whether LDP Path Manager supports
+IPv6 addresses, FECs and routes.
+
+If this field is set to false then no IPv6 addresses will
+be accepted over the NHR and I3 interfaces and all LDP
+protocol messages for IPv6 addresses or FECs will be
+returned to the peer as an LDP status code of 'Unsupported
+Address Family'."
+DEFVAL { false }
+::= {prvtcrldpPmEntry 23 }
+
+prvtcrldpPmPolicySupportFlags OBJECT-TYPE
+SYNTAX BITS {
+policySupported(0),
+perFecOptimizationSupported(1),
+suppressAddressPolicy(2)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This field contains bit flags which indicate whether
+PRVT-LDP supports LDP Policy and if per FEC policy
+optimization is to be used.
+
+The supported bit flags are defined below.
+- policySupported
+- perFecOptimizationSupported
+- suppressAddressPolicy.
+
+The policySupported flag indicates that PRVT-LDP will
+enforce policy decisions made by the user through a number
+of user exits. If this flag is not set PRVT-LDP will not
+call policy user exits.
+
+The perFecOptimizationSupported flag indicates that PRVT-LDP
+provides policy on a per FEC basis as opposed to a per FEC
+per session basis. This results in policy user exits only
+being called once per FEC. This field is only significant
+if the policySupported flag is set. This feature is used
+to reduce the number of calls to the Policy User Exits
+particularly when a change in Policy is being implemented.
+
+If the perFecOptimizationSupported flag is not set then
+PRVT-LDP Path Manager enforces policy on a per FEC per peer
+basis.
+
+If this flag is set policy is enforced on a per FEC basis
+and the same policy decision is assumed to apply for all
+peers.
+
+The suppressAddressPolicy flag if set prevents PRVT-LDP from
+performing any Policy processing on receipt of a Address
+or Address Withdraw message from a peer.
+
+If this field is not set then its default value is
+determined by the RCP_USER_DO_POLICY compile time flag.
+
+Changes to the value of policy_support_flags are not
+permitted whilst the MIB row is active."
+
+::= {prvtcrldpPmEntry 24 }
+
+prvtcrldpPmCheckOutSegIntfaceStat OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This field indicates whether LDP Path Manager makes the
+programming of each out segment conditional on the status
+of the interface where the out segment is programmed.
+
+When set to false, LDP Path Manager assumes that the
+availability of interfaces for programming is reflected in
+the adjacency and session information that it receives
+from LDP Session Controller, and in the routing
+information that it receives from the NHR stub.
+
+When set to true, LDP Path Manager tracks interface
+status itself and uses this in addition to input from LDP
+Session Controller and the NHR stub to decide whether an
+out segment should be programmed on a particular
+interface. If the other inputs indicate 'yes', but the
+relevant interface is (or goes) down, LDP Path Manager
+will not program that out segment (or will remove the
+existing out segment on that interface).
+
+This field cannot be changed when the row is active."
+DEFVAL { false }
+::= {prvtcrldpPmEntry 25 }
+END
diff --git a/MIBS/telco-systems/binos/PRVT-DHCP-MIB b/MIBS/telco-systems/binos/PRVT-DHCP-MIB
new file mode 100644
index 0000000..8ff8dd4
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-DHCP-MIB
@@ -0,0 +1,1010 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-DHCP-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-DHCP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+MODULE-IDENTITY,
+OBJECT-TYPE,
+IpAddress,
+Counter32,
+Unsigned32,
+Integer32
+FROM SNMPv2-SMI
+
+DisplayString,
+MacAddress,
+TruthValue,
+RowStatus
+FROM SNMPv2-TC
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+prvtDHCPMib MODULE-IDENTITY
+LAST-UPDATED "200502160000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"DHCP"
+
+-- revision history
+REVISION "200502160000Z"
+DESCRIPTION
+"Fixed spelling errors and changed the contact info."
+
+REVISION "200305060000Z"
+DESCRIPTION
+"Move to SMI-V2."
+
+REVISION "200205300000Z"
+DESCRIPTION
+"Initial version. This revision enables monitoring
+of the DHCP server status only."
+::= { switch 105 }
+
+prvtDHCPObjects OBJECT IDENTIFIER ::= { prvtDHCPMib 1 }
+prvtDHCPNotifications OBJECT IDENTIFIER ::= { prvtDHCPMib 2 }
+
+dhcpPackets OBJECT IDENTIFIER ::= { prvtDHCPObjects 1 }
+dhcpRanges OBJECT IDENTIFIER ::= { prvtDHCPObjects 2 }
+dhcpSubnets OBJECT IDENTIFIER ::= { prvtDHCPObjects 3 }
+dhcpHosts OBJECT IDENTIFIER ::= { prvtDHCPObjects 4 }
+dhcpOptions OBJECT IDENTIFIER ::= { prvtDHCPObjects 5 }
+dhcpPorts OBJECT IDENTIFIER ::= { prvtDHCPObjects 6 }
+dhcpVlans OBJECT IDENTIFIER ::= { prvtDHCPObjects 7 }
+dhcpMiscSettings OBJECT IDENTIFIER ::= { prvtDHCPObjects 8 }
+dhcpRRSettings OBJECT IDENTIFIER ::= { prvtDHCPObjects 9 }
+
+dhcpStaticHosts OBJECT IDENTIFIER ::= { dhcpHosts 1 }
+dhcpDynamicHosts OBJECT IDENTIFIER ::= { dhcpHosts 2 }
+
+dhcpStatusTotalNoOfDiscovers OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates the number of
+discovery messages received"
+::= { dhcpPackets 1 }
+
+dhcpStatusTotalNoOfRequests OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates the number of
+requests received"
+::= { dhcpPackets 2 }
+
+dhcpStatusTotalNoOfReleases OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates the number of
+releases received"
+::= { dhcpPackets 3 }
+
+dhcpStatusTotalNoOfOffers OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates the number of
+offers sent"
+::= { dhcpPackets 4 }
+
+dhcpStatusTotalNoOfAcks OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates the number of
+ACKs received"
+::= { dhcpPackets 5 }
+
+dhcpStatusTotalNoOfNacks OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates the number of
+NACKs received"
+::= { dhcpPackets 6 }
+
+dhcpStatusTotalNoOfDeclines OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates the number of
+declines"
+::= { dhcpPackets 7 }
+
+-- Range usage table
+
+dhcpRangeTable OBJECT-TYPE
+SYNTAX SEQUENCE OF DhcpRangeEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of ranges maintained by the server"
+::= { dhcpRanges 1 }
+
+dhcpRangeEntry OBJECT-TYPE
+SYNTAX DhcpRangeEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This is the row corresponding to a range"
+INDEX {dhcpRangeStartIp}
+::= { dhcpRangeTable 1 }
+
+DhcpRangeEntry ::= SEQUENCE {
+dhcpRangeStartIp IpAddress,
+dhcpRangeStopIp IpAddress,
+dhcpRangeNoAddInUse Counter32,
+dhcpRangeNoAddFree Counter32,
+dhcpRangeCircuitID DisplayString,
+dhcpRangeCircuitIDType INTEGER,
+dhcpRangeRangeName DisplayString,
+dhcpRangeSubnetIp IpAddress,
+dhcpRangeSubnetName DisplayString,
+dhcpRangeRowStatus RowStatus
+}
+
+dhcpRangeStartIp OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the range start address "
+::= { dhcpRangeEntry 1 }
+
+dhcpRangeStopIp OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the range stop address "
+::= { dhcpRangeEntry 2 }
+
+dhcpRangeNoAddInUse OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the number of addresses in use"
+::= { dhcpRangeEntry 3 }
+
+dhcpRangeNoAddFree OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the number of free addresses"
+::= { dhcpRangeEntry 4 }
+
+dhcpRangeCircuitID OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is circuit-ID of that range "
+::= { dhcpRangeEntry 5 }
+
+dhcpRangeCircuitIDType OBJECT-TYPE
+SYNTAX INTEGER {
+string(1),
+hex(2)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is circuit-ID type of that range "
+::= { dhcpRangeEntry 6 }
+
+dhcpRangeRangeName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the range name "
+::= { dhcpRangeEntry 7 }
+
+dhcpRangeSubnetIp OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the range start address "
+::= { dhcpRangeEntry 8 }
+
+dhcpRangeSubnetName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Subnet name, related to the range"
+::= { dhcpRangeEntry 9 }
+
+dhcpRangeRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Indicates the status of the row. Setting of this field to active enables range
+creation"
+::= { dhcpRangeEntry 10 }
+
+-- Subnets table
+
+dhcpSubnetTable OBJECT-TYPE
+SYNTAX SEQUENCE OF DhcpSubnetEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of subnets maintained by the server"
+::= { dhcpSubnets 1 }
+
+dhcpSubnetEntry OBJECT-TYPE
+SYNTAX DhcpSubnetEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This is the row corresponding to a single subnet"
+INDEX {dhcpSubnetIp}
+::= { dhcpSubnetTable 1 }
+
+DhcpSubnetEntry ::= SEQUENCE {
+dhcpSubnetIp IpAddress,
+dhcpSubnetMask IpAddress,
+dhcpSubnetName DisplayString,
+dhcpSubnetNoAddInUse Counter32,
+dhcpSubnetNoAddFree Counter32,
+dhcpSubnetRowStatus RowStatus
+}
+
+dhcpSubnetIp OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the subnet IP address "
+::= { dhcpSubnetEntry 1 }
+
+dhcpSubnetMask OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the subnet netmask "
+::= { dhcpSubnetEntry 2 }
+
+dhcpSubnetName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the subnet name"
+::= { dhcpSubnetEntry 3 }
+
+dhcpSubnetNoAddInUse OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the number of addresses in use"
+::= { dhcpSubnetEntry 4 }
+
+dhcpSubnetNoAddFree OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the number of addresses that are free "
+::= { dhcpSubnetEntry 5 }
+
+dhcpSubnetRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Indicates the status of the row. Setting of this field to active enables
+subnet creation"
+::= { dhcpSubnetEntry 6 }
+
+-- Static Hosts table
+
+dhcpStaticHostsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF DhcpStaticHostsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of hosts with fixed IP addresses maintained by the server"
+::= { dhcpStaticHosts 1 }
+
+dhcpStaticHostsEntry OBJECT-TYPE
+SYNTAX DhcpStaticHostsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This is the row, corresponding to a subnet"
+INDEX {dhcpStaticHostIPAddress}
+::= { dhcpStaticHostsTable 1 }
+
+DhcpStaticHostsEntry ::= SEQUENCE {
+dhcpStaticHostIPAddress IpAddress,
+dhcpStaticHostName DisplayString,
+dhcpStaticHostConnected TruthValue,
+dhcpStaticHostMACAddr MacAddress,
+dhcpStaticHostFilename DisplayString,
+dhcpStaticHostBootpIP IpAddress,
+dhcpStaticHostServer DisplayString,
+dhcpStatisHostSnoofPort Counter32,
+dhcpStaticHostRowStatus RowStatus
+}
+
+dhcpStaticHostIPAddress OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the fixed IP address, reserved for this host"
+::= { dhcpStaticHostsEntry 1 }
+
+dhcpStaticHostName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the host name"
+::= { dhcpStaticHostsEntry 2 }
+
+dhcpStaticHostConnected OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the currently connected status of the host.
+The value TRUE means that this host has requested this IP address"
+::= { dhcpStaticHostsEntry 3 }
+
+dhcpStaticHostMACAddr OBJECT-TYPE
+SYNTAX MacAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the specified host MAC address "
+::= { dhcpStaticHostsEntry 4 }
+
+dhcpStaticHostFilename OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the host file name"
+::= { dhcpStaticHostsEntry 5 }
+
+dhcpStaticHostBootpIP OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the bootstrap server IP address for the current host"
+::= { dhcpStaticHostsEntry 6 }
+
+dhcpStaticHostServer OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is boot server name"
+::= { dhcpStaticHostsEntry 7 }
+
+dhcpStatisHostSnoofPort OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the coresponding Snoof port if defined"
+::= { dhcpStaticHostsEntry 8 }
+
+dhcpStaticHostRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Indicates the status of the row. Setting this field to active
+enables static host creation"
+::= { dhcpStaticHostsEntry 9 }
+
+-- Lease states table
+
+dhcpLeaseStateTable OBJECT-TYPE
+SYNTAX SEQUENCE OF DhcpLeaseStateEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of lease states"
+::= { dhcpDynamicHosts 1 }
+
+dhcpLeaseStateEntry OBJECT-TYPE
+SYNTAX DhcpLeaseStateEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This is the row corresponding to a single lease"
+INDEX {dhcpLeaseIp}
+::= { dhcpLeaseStateTable 1 }
+
+DhcpLeaseStateEntry ::= SEQUENCE {
+dhcpLeaseIp IpAddress,
+dhcpLeaseName DisplayString,
+dhcpLeaseETime DisplayString,
+dhcpLeaseMac MacAddress,
+dhcpLeaseSnoofPort Counter32
+}
+
+dhcpLeaseIp OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the lease IP address "
+::= { dhcpLeaseStateEntry 1 }
+
+dhcpLeaseName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the lease name"
+::= { dhcpLeaseStateEntry 2 }
+
+dhcpLeaseETime OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Lease expiration time"
+::= { dhcpLeaseStateEntry 3 }
+
+dhcpLeaseMac OBJECT-TYPE
+SYNTAX MacAddress
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the lease MAC address "
+::= { dhcpLeaseStateEntry 4 }
+
+dhcpLeaseSnoofPort OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the corresponding Snoof port, if defined"
+::= { dhcpLeaseStateEntry 5 }
+
+-- Options table
+
+dhcpOptionsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF DhcpOptionsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of options set on the server"
+::= { dhcpOptions 1 }
+
+dhcpOptionsEntry OBJECT-TYPE
+SYNTAX DhcpOptionsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This is the row corresponding to a set of options"
+INDEX {dhcpOptionsSubnetIp}
+::= { dhcpOptionsTable 1 }
+
+DhcpOptionsEntry ::= SEQUENCE {
+dhcpOptionsSubnetIp DisplayString,
+dhcpOptionsMaxLTime Counter32,
+dhcpOptionsDfltLTime Counter32,
+dhcpOptionsRouter IpAddress,
+dhcpOptionsBrcstAddr IpAddress,
+dhcpOptionsSubnetMask IpAddress,
+dhcpOptionsDomainName DisplayString,
+dhcpOptionsMeritDump DisplayString,
+dhcpOptionsRootPath DisplayString,
+dhcpOptionsBootStSrv IpAddress,
+dhcpOptionsBootFileName DisplayString,
+--
+dhcpOptionsDNSServer1 IpAddress,
+dhcpOptionsDNSServer2 IpAddress,
+dhcpOptionsDNSServer3 IpAddress,
+dhcpOptionsDNSServer4 IpAddress,
+dhcpOptionsDNSServer5 IpAddress,
+--
+dhcpOptionsLogServer1 IpAddress,
+dhcpOptionsLogServer2 IpAddress,
+dhcpOptionsLogServer3 IpAddress,
+dhcpOptionsLogServer4 IpAddress,
+dhcpOptionsLogServer5 IpAddress,
+--
+dhcpOptionsWinsServer1 IpAddress,
+dhcpOptionsWinsServer2 IpAddress,
+dhcpOptionsWinsServer3 IpAddress,
+dhcpOptionsWinsServer4 IpAddress,
+dhcpOptionsWinsServer5 IpAddress
+}
+
+dhcpOptionsSubnetIp OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the subnet IP address "
+::= { dhcpOptionsEntry 1 }
+
+dhcpOptionsMaxLTime OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the max-lease-time option "
+::= { dhcpOptionsEntry 2 }
+
+dhcpOptionsDfltLTime OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the default-lease-time option "
+::= { dhcpOptionsEntry 3 }
+
+dhcpOptionsRouter OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the router option "
+::= { dhcpOptionsEntry 4 }
+
+dhcpOptionsBrcstAddr OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the network broadcast address option "
+::= { dhcpOptionsEntry 5 }
+
+dhcpOptionsSubnetMask OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the network subnet mask option "
+::= { dhcpOptionsEntry 6 }
+
+dhcpOptionsDomainName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the domain-name option "
+::= { dhcpOptionsEntry 7 }
+
+dhcpOptionsMeritDump OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the merit-dump option "
+::= { dhcpOptionsEntry 8 }
+
+dhcpOptionsRootPath OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the root-path option "
+::= { dhcpOptionsEntry 9 }
+
+dhcpOptionsBootStSrv OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the bootstrap server IP address "
+::= { dhcpOptionsEntry 10 }
+
+dhcpOptionsBootFileName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the bootstrap filename option "
+::= { dhcpOptionsEntry 11 }
+
+dhcpOptionsDNSServer1 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the first DNS server option "
+::= { dhcpOptionsEntry 12 }
+
+dhcpOptionsDNSServer2 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the second DNS server option "
+::= { dhcpOptionsEntry 13 }
+
+dhcpOptionsDNSServer3 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the third DNS server option "
+::= { dhcpOptionsEntry 14 }
+
+dhcpOptionsDNSServer4 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the fourth DNS server option "
+::= { dhcpOptionsEntry 15 }
+
+dhcpOptionsDNSServer5 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the fifth DNS server option "
+::= { dhcpOptionsEntry 16 }
+
+dhcpOptionsLogServer1 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the first log-server option "
+::= { dhcpOptionsEntry 17 }
+
+dhcpOptionsLogServer2 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the second log-server option "
+::= { dhcpOptionsEntry 18 }
+
+dhcpOptionsLogServer3 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the third log-server option "
+::= { dhcpOptionsEntry 19 }
+
+dhcpOptionsLogServer4 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the fourth log-server option "
+::= { dhcpOptionsEntry 20 }
+
+dhcpOptionsLogServer5 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the fifth log-server option "
+::= { dhcpOptionsEntry 21 }
+
+dhcpOptionsWinsServer1 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the first WINS server option "
+::= { dhcpOptionsEntry 22 }
+
+dhcpOptionsWinsServer2 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the second WINS server option "
+::= { dhcpOptionsEntry 23 }
+
+dhcpOptionsWinsServer3 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the third WINS server option "
+::= { dhcpOptionsEntry 24 }
+
+dhcpOptionsWinsServer4 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the fourth WINS server option "
+::= { dhcpOptionsEntry 25 }
+
+dhcpOptionsWinsServer5 OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the fifth WINS server option "
+::= { dhcpOptionsEntry 26 }
+
+-- Misc DHCP server settings
+
+dhcpDBExpire OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Expire time for internal DHCP database "
+::= { dhcpMiscSettings 1 }
+
+dhcpTFTPServer OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"IP address of TFTP server to store the DHCP database remotely "
+::= { dhcpMiscSettings 2 }
+
+dhcpFTPServer OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"IP address of FTP server to store the DHCP database remotely "
+::= { dhcpMiscSettings 3 }
+
+dhcpFTPServerUser OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Username for remote FTP server "
+::= { dhcpMiscSettings 4 }
+
+dhcpFTPServerPass OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Password for remote FTP server "
+::= { dhcpMiscSettings 5 }
+
+dhcpRemoteDBDelay OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Delay between consecutive database transfers to remote server "
+::= { dhcpMiscSettings 6 }
+
+dhcpRemoteDBFilename OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"IP Leases remote database filename"
+::= { dhcpMiscSettings 7 }
+
+dhcpUnknownCircuitIDPolicy OBJECT-TYPE
+SYNTAX INTEGER {
+permit(1),
+deny(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Unknown circuit-ID policy "
+::= { dhcpMiscSettings 8 }
+
+dhcpEnableServer OBJECT-TYPE
+SYNTAX INTEGER {
+enabled(1),
+disabled(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enable/disable DHCP server operation "
+::= { dhcpMiscSettings 9 }
+
+-- Port settings table
+
+dhcpPortTable OBJECT-TYPE
+SYNTAX SEQUENCE OF DhcpPortEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of DHCP settings related to ports "
+::= { dhcpPorts 1 }
+
+dhcpPortEntry OBJECT-TYPE
+SYNTAX DhcpPortEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"These are the physical port settings."
+INDEX {dhcpPort}
+::= { dhcpPortTable 1 }
+
+DhcpPortEntry ::= SEQUENCE {
+dhcpPort Integer32,
+dhcpMaxPortIP Counter32,
+dhcpPortSnoof TruthValue,
+dhcpPortServiceEnable TruthValue
+}
+
+dhcpPort OBJECT-TYPE
+SYNTAX Integer32(0..2147483647)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the port number."
+::= { dhcpPortEntry 1 }
+
+dhcpMaxPortIP OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is the maximum IP addresses to be given via the current port."
+::= { dhcpPortEntry 2 }
+
+dhcpPortSnoof OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is a check for enabling/disabling Snoof on the current port."
+::= { dhcpPortEntry 3 }
+
+dhcpPortServiceEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is a check for enabling/disabling DHCP service on the current port."
+::= { dhcpPortEntry 4 }
+
+-- Vlan settings table
+
+dhcpVlanTable OBJECT-TYPE
+SYNTAX SEQUENCE OF DhcpVlanEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of DHCP VLAN settings."
+::= { dhcpVlans 1 }
+
+dhcpVlanEntry OBJECT-TYPE
+SYNTAX DhcpVlanEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This is the row corresponding to a single VLAN setting."
+INDEX {dhcpVlanID}
+::= { dhcpVlanTable 1 }
+
+DhcpVlanEntry ::= SEQUENCE {
+dhcpVlanID Unsigned32,
+dhcpVlanEnable TruthValue
+}
+
+dhcpVlanID OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the VLAN ID."
+::= { dhcpVlanEntry 1 }
+
+dhcpVlanEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is enable/disable DHCP service status per VLAN."
+::= { dhcpVlanEntry 2 }
+
+-- RR settings table
+
+dhcpRRTable OBJECT-TYPE
+SYNTAX SEQUENCE OF DhcpRREntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of DHCP round-robin settings."
+::= { dhcpRRSettings 1 }
+
+dhcpRREntry OBJECT-TYPE
+SYNTAX DhcpRREntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This is the row corresponding to single VLAN setting."
+INDEX {dhcpRRif}
+::= { dhcpRRTable 1 }
+
+DhcpRREntry ::= SEQUENCE {
+dhcpRRif DisplayString,
+dhcpRREnable TruthValue
+}
+
+dhcpRRif OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the IP interface name."
+::= { dhcpRREntry 1 }
+
+dhcpRREnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This is enable/disable DHCP round-robin feature per interface."
+::= { dhcpRREntry 2 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-DRY-CONTACTS-MIB b/MIBS/telco-systems/binos/PRVT-DRY-CONTACTS-MIB
new file mode 100644
index 0000000..bb04650
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-DRY-CONTACTS-MIB
@@ -0,0 +1,190 @@
+PRVT-DRY-CONTACTS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+TimeTicks,
+NOTIFICATION-TYPE,
+Integer32
+FROM SNMPv2-SMI
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+prvtDryContactsMIB MODULE-IDENTITY
+LAST-UPDATED "200711270000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"Initial version. This MIB provides external-alarm management and notifications"
+
+-- revision history
+REVISION "200711270000Z"
+DESCRIPTION
+"Compilation fixes"
+
+::= { switch 112 }
+
+dryContactsNotifications OBJECT IDENTIFIER ::= { prvtDryContactsMIB 0 }
+dryContactsObjects OBJECT IDENTIFIER ::= { prvtDryContactsMIB 1 }
+
+cfgTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CfgEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A table containing inputs configuration and statuses"
+::= { dryContactsObjects 1 }
+
+cfgEntry OBJECT-TYPE
+SYNTAX CfgEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"cfgEntry"
+INDEX  { prvtAlarmID }
+::= { cfgTable 1 }
+
+CfgEntry ::= SEQUENCE {
+prvtAlarmID Integer32,
+prvtSensorType  INTEGER,
+prvtName OCTET STRING,
+prvtDescription OCTET STRING,
+prvtEnableStatus INTEGER,
+prvtAlarmStatus INTEGER,
+prvtAlarmSeverity INTEGER,
+prvtPolarity INTEGER,
+prvtLastChange TimeTicks
+}
+
+prvtAlarmID OBJECT-TYPE
+SYNTAX Integer32(1..6)
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"External and internal alarm index uniquely identifies this row.
+T-Metro 200 ES platform has four dry-contacts sensor inputs.
+T5C-XG platform has four dry-contact sensor inputs and two dry-contact sensor outputs. 
+An integer with supported range of values 1-6 for T5C-XG and 1-4 for T-Metro 200 ES. Index. Not-accessible"
+::= { cfgEntry 1}
+
+prvtSensorType OBJECT-TYPE
+SYNTAX INTEGER {
+input(1),
+output(2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Sensor type. An enumeration with two values: input(1), output(2). 
+T-Metro 200 ES platform has four dry-contacts sensor inputs.
+T5C-XG platform has four dry-contact sensor inputs and two dry-contact sensor outputs.
+Read-only."
+::= { cfgEntry 2 }
+
+
+
+prvtName OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Name of alarm. An OCTET-STRING with max. 16 OCTETS.
+Default value null string. Read-write"
+::= { cfgEntry 3}
+
+prvtDescription OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Alarm description. An OCTET-STRING with max. 64 OCTETS.
+Default value null string. Read-write"
+::= { cfgEntry 4}
+
+prvtEnableStatus OBJECT-TYPE
+SYNTAX INTEGER {
+enabled(1),
+disabled(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Senging alarms status. An enumeration with two values: enabled(1), disabled(2).
+Default value is disabled(2). Read-write"
+::= { cfgEntry 5}
+
+prvtAlarmStatus OBJECT-TYPE
+SYNTAX INTEGER {
+no-alarm(1),
+alarm(2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Alarm status. An enumeration with two values: no-alarm(1), alarm(2).
+Default value is no-alarm(1). Read-only."
+::= { cfgEntry 6 }
+
+prvtAlarmSeverity OBJECT-TYPE
+SYNTAX INTEGER {
+info(1),
+minor(2),
+major(3),
+critical(4)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Configured alarm severity. An enumeration with 4 values:
+info(1), minor(2), major(3) and critical(4).
+Default value is info(1). Read-write"
+::= { cfgEntry 7}
+
+prvtPolarity OBJECT-TYPE
+SYNTAX INTEGER {
+normally-opened(1),
+normally-closed(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Configured polarity.
+An enumeration with 2 values: normally-opened(1), normally-closed(2).
+This object is only for T-Metro 200 ES platform. 
+Default value is normally-opened(1). Read-write"
+::= { cfgEntry 8}
+
+prvtLastChange OBJECT-TYPE
+SYNTAX TimeTicks
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of sysUpTime at the time of the last operational status change.
+TimeTicks. Read-only"
+::= { cfgEntry 9}
+
+-- Notifications.
+
+stateChanged NOTIFICATION-TYPE
+OBJECTS {
+prvtAlarmID ,
+prvtSensorType,
+prvtName,
+prvtDescription,
+prvtAlarmStatus,
+prvtAlarmSeverity
+}
+STATUS current
+DESCRIPTION
+"Send notification when operational status of the input changes"
+::= { dryContactsNotifications 1 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-EGRESS-COUNTERS-MIB b/MIBS/telco-systems/binos/PRVT-EGRESS-COUNTERS-MIB
new file mode 100644
index 0000000..4975087
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-EGRESS-COUNTERS-MIB
@@ -0,0 +1,444 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-EGRESS-COUNTERS-MIB
+-- ** Project: Ethernet Local Management Interface
+ -- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-EGRESS-COUNTERS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, Counter32, Unsigned32, Integer32, Gauge32,IpAddress
+                FROM SNMPv2-SMI
+        MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
+                FROM SNMPv2-CONF
+        TEXTUAL-CONVENTION, TruthValue, RowStatus, StorageType, TimeStamp
+                FROM SNMPv2-TC
+        NOTIFICATION-TYPE
+                FROM SNMPv2-SMI                    -- [RFC2578]
+        InterfaceIndex, ifIndex
+                FROM IF-MIB
+        switch 
+                FROM PRVT-SWITCH-MIB; 
+
+-- The EGRESS COUNTER MIB
+prvtEgressCounterMib MODULE-IDENTITY
+        LAST-UPDATED "201005210000Z"
+        ORGANIZATION "BATM Advanced Communication"
+        CONTACT-INFO
+                "BATM/Telco Systems Support team
+                Email: 
+                For North America: techsupport@telco.com
+                For North Europe: support@batm.de, info@batm.de
+                For the rest of the world: techsupport@telco.com"
+        DESCRIPTION
+                "This MIB provides the egress counters for specific boards, refer to documentation for more details."
+        REVISION "201005210000Z"
+        DESCRIPTION
+                "Initial version." 
+        ::= { switch 160 }
+
+
+prvtEgressCntNotifications OBJECT IDENTIFIER    ::= { prvtEgressCounterMib 0 }
+prvtEgressCntObjects OBJECT IDENTIFIER          ::= { prvtEgressCounterMib 1 }
+prvtEgressCntConformance OBJECT IDENTIFIER      ::= { prvtEgressCounterMib 2 }
+
+
+--------------------------------------------------------------
+--EgressCounter objects
+--------------------------------------------------------------
+
+
+prvtEgressCntCounterSetTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF PrvtEgressCntCounterSetEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+                "This table contains objects for the counters set. Available only for specific boards, refer to documentation for more details."
+        ::= { prvtEgressCntObjects 1 }
+  
+  
+prvtEgressCntCounterSetEntry OBJECT-TYPE
+        SYNTAX PrvtEgressCntCounterSetEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+                "prvtEgressCntCounterSetEntry"
+        INDEX  { prvtEgressCntCounterSetID }
+        ::= { prvtEgressCntCounterSetTable 1 }
+
+PrvtEgressCntCounterSetEntry ::=  SEQUENCE{
+        prvtEgressCntCounterSetID               Unsigned32,
+        prvtEgressCntAllPriorities              TruthValue,
+        prvtEgressCntPriority                   Unsigned32,
+        prvtEgressCntAllDropLevels              TruthValue,
+        prvtEgressCntDropLevelMode              INTEGER,
+        prvtEgressCntAllVlans                   TruthValue,
+        prvtEgressCntVlan                       Unsigned32,
+        prvtEgressCntAllInterfaces              TruthValue,
+        prvtEgressCntInterfaces                 InterfaceIndex,
+        prvtEgressCntPort                       INTEGER,
+        prvtEgressCntClearCounterSet            INTEGER,
+        prvtEgressCntCounterSetRowStatus        RowStatus
+}
+
+prvtEgressCntCounterSetID OBJECT-TYPE
+        SYNTAX Unsigned32 (1..2)
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+                "The counters set ID. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCounterSetEntry 1 }
+
+
+prvtEgressCntAllPriorities  OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "Shows if all priorities are set. Available only for specific boards, refer to documentation for more details."
+        ::= { prvtEgressCntCounterSetEntry 2 }
+
+prvtEgressCntPriority OBJECT-TYPE
+        SYNTAX Unsigned32 (0..7)
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+                "Priority definition. If prvtAllPriorities object is true then prvtPriority object is irrelevant. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCounterSetEntry 3 }
+
+prvtEgressCntAllDropLevels OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Shows if all drop levels are set. Available only for specific boards, refer to documentation for more details."
+        ::= { prvtEgressCntCounterSetEntry 4 }
+
+prvtEgressCntDropLevelMode  OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+        green (1),
+        yellow (2)
+        }
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+                " Drop level definition. If prvtAllDropLevels object is true then prvtDropLevelMode object is irrelevant. Available only for specific boards, refer to documentation for more details." 
+        ::= { prvtEgressCntCounterSetEntry 5 }
+
+prvtEgressCntAllVlans  OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Shows if all vlans are set. Available only for specific boards, refer to documentation for more details."
+        ::= { prvtEgressCntCounterSetEntry 6 }
+
+
+prvtEgressCntVlan OBJECT-TYPE
+        SYNTAX Unsigned32 (1..4094)
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+                "The vlan ID. If prvtAllVlans object is true then prvtVlan object is irrelevant. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCounterSetEntry 7 }
+
+
+prvtEgressCntAllInterfaces OBJECT-TYPE
+        SYNTAX  TruthValue
+        MAX-ACCESS  read-only
+        STATUS current
+        DESCRIPTION
+                "Shows if all interfaces are set. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCounterSetEntry 8 }
+
+prvtEgressCntInterfaces OBJECT-TYPE
+        SYNTAX InterfaceIndex
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+                "The interface definition. If prvtAllInterfaces object is true then prvtInterfaces object is irrelevant. Available only for specific boards, refer to documentation for more details."
+        ::= { prvtEgressCntCounterSetEntry 9 }
+
+prvtEgressCntPort OBJECT-TYPE
+        SYNTAX INTEGER {
+        none ( 0 ),
+        set ( 1 )
+        }
+        MAX-ACCESS  read-write
+        STATUS current
+        DESCRIPTION
+                "CPU port. Available only for specific boards, refer to documentation for more details. "
+        DEFVAL { none }
+        ::= { prvtEgressCntCounterSetEntry 10 }
+
+
+prvtEgressCntClearCounterSet OBJECT-TYPE
+        SYNTAX INTEGER {
+        none ( 0 ),
+        clear ( 1 )
+        }
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION 
+                "Deletes a specified set of egress counters. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCounterSetEntry 11 }
+
+prvtEgressCntCounterSetRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+        MAX-ACCESS read-create
+        STATUS current   
+        DESCRIPTION
+                "Counter set  rowStatus. Supported only NotInService/Active. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCounterSetEntry 12 }
+
+prvtEgressCntCountersTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF PrvtEgressCntCountersEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+                "This table contains the counters. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntObjects 2 }
+  
+  
+prvtEgressCntCountersEntry OBJECT-TYPE
+        SYNTAX PrvtEgressCntCountersEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+                "prvtEgressCntCountersEntry"
+                INDEX  { prvtEgressCntCounterSetID }
+        ::= { prvtEgressCntCountersTable 1 }
+
+PrvtEgressCntCountersEntry ::=  SEQUENCE{
+        prvtEgressCntOutBcFrames        Unsigned32,
+        prvtEgressCntOutNUcFrames       Unsigned32,
+        prvtEgressCntOutUcFrames        Unsigned32,
+        prvtEgressCntEgrFilterDisc      Unsigned32,
+        prvtEgressCntTxqFilterDisc      Unsigned32,
+        prvtEgressCntOutCtrlFrames      Unsigned32,
+        prvtEgressCntEgrFrwFilterDisc   Unsigned32,
+        prvtEgressCntClearCounters      INTEGER
+}
+
+
+prvtEgressCntOutBcFrames OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Broadcast packet counter. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCountersEntry 1 }
+
+prvtEgressCntOutNUcFrames OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Multicast packet counter . Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCountersEntry 2 }
+
+prvtEgressCntOutUcFrames OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Unicast packet counter. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCountersEntry 3 }
+
+prvtEgressCntEgrFilterDisc OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Egress filtered packet counter. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCountersEntry 4 }
+
+prvtEgressCntTxqFilterDisc OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Tail dropped packet counter. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCountersEntry 5 }
+
+prvtEgressCntOutCtrlFrames OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "Control packet counter. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCountersEntry 6 }
+
+prvtEgressCntEgrFrwFilterDisc OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Egress forwarding restriction packet counter. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntCountersEntry 7 }
+
+prvtEgressCntClearCounters OBJECT-TYPE
+        SYNTAX INTEGER {
+        none ( 0 ),
+        clear ( 1 )
+        }
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION 
+                "Clears a counter set statistics. Available only for specific boards, refer to documentation for more details."
+        ::= { prvtEgressCntCountersEntry 8 }
+
+
+prvtEgressCntQosCountersTable OBJECT-TYPE
+        SYNTAX SEQUENCE OF PrvtEgressCntQosCountersEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+                "This table contains objects for counters which count number of packets dropped due to congestions. Available only for specific boards, refer to documentation for more details."
+        ::= { prvtEgressCntObjects 3 }
+  
+  
+prvtEgressCntQosCountersEntry OBJECT-TYPE
+        SYNTAX PrvtEgressCntQosCountersEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+                "prvtEgressCntQosCountersEntry"
+        INDEX { ifIndex }
+        ::= { prvtEgressCntQosCountersTable 1 }
+
+PrvtEgressCntQosCountersEntry ::=  SEQUENCE{
+        prvtEgressCntQosYellowPacketCounters    Unsigned32,
+        prvtEgressCntQosRedPacketCounters       Unsigned32,
+        prvtEgressCntQosMaximumRateReached      TruthValue
+}
+
+prvtEgressCntQosYellowPacketCounters OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Congestion color yellow dropped packet. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntQosCountersEntry 1 }
+
+prvtEgressCntQosRedPacketCounters OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Congestion color red dropped packet. Available only for specific boards, refer to documentation for more details. "
+        ::= { prvtEgressCntQosCountersEntry 2 }
+
+prvtEgressCntQosMaximumRateReached  OBJECT-TYPE
+        SYNTAX TruthValue
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+                "Checks if port egress maximum rate has been reached. Available only for specific boards, refer to documentation for more details."
+        ::= { prvtEgressCntQosCountersEntry 3 }
+
+prvtEgressCntCompliances OBJECT IDENTIFIER ::= { prvtEgressCntConformance 1 }
+prvtEgressCntGroups      OBJECT IDENTIFIER ::= { prvtEgressCntConformance 2 }
+
+-- ******************************************************************
+-- Units of conformance
+-- ******************************************************************
+
+prvtEgressCntCounterSetGroup OBJECT-GROUP
+        OBJECTS {
+                prvtEgressCntAllPriorities,
+                prvtEgressCntPriority,
+                prvtEgressCntAllDropLevels,
+                prvtEgressCntDropLevelMode,
+                prvtEgressCntAllVlans,
+                prvtEgressCntVlan,
+                prvtEgressCntAllInterfaces,
+                prvtEgressCntInterfaces,
+                prvtEgressCntPort,
+                prvtEgressCntClearCounterSet,
+                prvtEgressCntCounterSetRowStatus
+        }
+        STATUS current
+        DESCRIPTION
+                "Objects for the egress counter set group."
+        ::= { prvtEgressCntGroups 1 }
+
+prvtEgressCntCountersGroup OBJECT-GROUP
+        OBJECTS {
+                prvtEgressCntOutBcFrames,
+                prvtEgressCntOutNUcFrames,
+                prvtEgressCntOutUcFrames,
+                prvtEgressCntEgrFilterDisc,
+                prvtEgressCntTxqFilterDisc,
+                prvtEgressCntOutCtrlFrames,
+                prvtEgressCntEgrFrwFilterDisc,
+                prvtEgressCntClearCounters
+        }
+        STATUS      current
+        DESCRIPTION
+                "Objects for the egress counters group."
+        ::= { prvtEgressCntGroups 2 }
+    
+prvtEgressCntQosCountersGroup OBJECT-GROUP
+        OBJECTS {
+                prvtEgressCntQosYellowPacketCounters,
+                prvtEgressCntQosRedPacketCounters,
+                prvtEgressCntQosMaximumRateReached
+        }
+        STATUS      current
+        DESCRIPTION
+                "Objects for the qos egress counters."
+        ::= { prvtEgressCntGroups 3 }
+
+prvtEgressCntCompliance MODULE-COMPLIANCE
+        STATUS current
+        DESCRIPTION
+                "The compliance statement for support of the egress counters MIB module."
+        MODULE
+        MANDATORY-GROUPS {
+                prvtEgressCntCounterSetGroup,
+                prvtEgressCntCountersGroup,
+                prvtEgressCntQosCountersGroup
+        }
+
+        ::= { prvtEgressCntCompliances 1 }
+
+
+END
+
+
+ 
diff --git a/MIBS/telco-systems/binos/PRVT-ELMI-MIB b/MIBS/telco-systems/binos/PRVT-ELMI-MIB
new file mode 100644
index 0000000..7b61c83
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-ELMI-MIB
@@ -0,0 +1,533 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-ELMI-MIB
+-- ** Project: Ethernet Local Management Interface
+ -- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-ELMI-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Counter32,
+Unsigned32, 
+Integer32,
+Gauge32,
+IpAddress
+FROM SNMPv2-SMI
+
+MODULE-COMPLIANCE, NOTIFICATION-GROUP,
+OBJECT-GROUP
+FROM SNMPv2-CONF
+
+TEXTUAL-CONVENTION,
+TruthValue,
+RowStatus,
+StorageType,
+TimeStamp
+FROM SNMPv2-TC
+
+NOTIFICATION-TYPE, transmission
+          FROM SNMPv2-SMI                    -- [RFC2578]
+
+InterfaceIndex, ifIndex
+FROM IF-MIB
+
+switch FROM PRVT-SWITCH-MIB; 
+
+-- The ELMI MIB
+prvtELMIMib MODULE-IDENTITY
+
+LAST-UPDATED "200907130000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB contains managed object definitions for
+encapsulating E-LMI that is terminated by the UNI-C 
+on the CE side of the UNI and by the UNI-N on the MEN side of the UNI."
+
+             
+REVISION "200907130000Z"
+DESCRIPTION
+"Initial version." 
+ 
+ 
+::= { switch 120 }
+
+
+prvtELMINotifications OBJECT IDENTIFIER ::= { prvtELMIMib 0 } 
+prvtELMIObjects OBJECT IDENTIFIER 		::= { prvtELMIMib 1 } 
+prvtELMIConformance OBJECT IDENTIFIER 	::= { prvtELMIMib 2 }
+
+
+--------------------------------------------------------------
+--E-LMI objects
+--------------------------------------------------------------
+
+prvtELMIEnable OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}   
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"E-LMI enable protocol"
+DEFVAL { disable }
+::=  { prvtELMIObjects 1 }   
+
+prvtELMICfgTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtELMICfgEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object for configuring E-LMI protocol."
+::= { prvtELMIObjects 2 }
+  
+  
+prvtELMICfgEntry OBJECT-TYPE
+SYNTAX PrvtELMICfgEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+""
+INDEX { ifIndex }
+::= { prvtELMICfgTable 1 }
+
+PrvtELMICfgEntry ::=  SEQUENCE{
+prvtELMIIfEnable 			INTEGER,   
+prvtELMIIfMode 			INTEGER,
+prvtELMIPollingCnt 		INTEGER,
+prvtELMIPollingTimer 	INTEGER,
+prvtELMIVerifPollTimer 	INTEGER,
+prvtELMIStatusCnt		INTEGER,
+prvtELMIClearStatistics INTEGER,
+prvtELMIMapEvcCEVlanType INTEGER  
+}
+
+
+prvtELMIIfEnable   OBJECT-TYPE
+SYNTAX INTEGER    
+{
+enable (1),
+disable (2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" Enables or disables E-LMI feature per interface." 
+::= { prvtELMICfgEntry 1 }            
+
+
+prvtELMIIfMode   OBJECT-TYPE
+SYNTAX INTEGER    
+{
+uni-n (1),
+uni-c (2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" E-LMI working mode per interface." 
+::= { prvtELMICfgEntry 2 }  
+
+
+prvtELMIPollingCnt   OBJECT-TYPE
+SYNTAX INTEGER  (1 .. 65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" Polling counter -  controls the number of polling cycles between Full Status exchanges.
+Aplicable only in UNI-C mode"        
+ DEFVAL { 360 }
+::= { prvtELMICfgEntry 3 } 
+
+prvtELMIPollingTimer   OBJECT-TYPE
+SYNTAX INTEGER  (5..30)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" Polling timer - controls the interval at which STATUS ENQUIRY messages are transmitted.
+Aplicable only in UNI-C mode"        
+ DEFVAL { 10 }
+::= { prvtELMICfgEntry 4 } 
+
+prvtELMIVerifPollTimer   OBJECT-TYPE
+SYNTAX INTEGER (5..30)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" Polling Verification Timer - controls the interval during which information sent to the UNI-C in a STATUS message is consider valid.
+ The Polling Verification Timer MAY be disabled and thus the PVT never expires.
+ Polling Verification Timer is valid only for UNI-N mode.
+ For disable the counter SET 0 value"   
+ DEFVAL { 15 }
+::= { prvtELMICfgEntry 5 }
+ 
+
+prvtELMIStatusCnt OBJECT-TYPE
+SYNTAX INTEGER (2..10)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" Status Counter - controls the number of consecutive errors that must occur before E-LMI at the UNI is declared as not operational.
+Aplicable in both UNI-Cand UNI-N mode"   
+DEFVAL { 4 }
+::= { prvtELMICfgEntry 6 } 
+ 
+prvtELMIClearStatistics  OBJECT-TYPE
+SYNTAX INTEGER 
+{       
+none (0),
+clear(1)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Clear ELMI statistics per interface."
+::= { prvtELMICfgEntry 7 }  
+
+prvtELMIMapEvcCEVlanType OBJECT-TYPE
+SYNTAX INTEGER 
+{   
+allToOneBundling  (1),
+serviceMultiplexingWithNoBund (2), 
+budling(3)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"CE-VLAN ID/EVC Map Type ."
+::= { prvtELMICfgEntry 8}          
+
+prvtELMIStatisticsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtELMIStatisticsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains objects for displaing E-LMI statistics."
+::= { prvtELMIObjects 3 }
+  
+  
+prvtELMIStatisticsEntry OBJECT-TYPE
+SYNTAX PrvtELMIStatisticsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+""
+INDEX { ifIndex }
+::= { prvtELMIStatisticsTable 1 }
+
+PrvtELMIStatisticsEntry ::= SEQUENCE{
+prvtELMIStatusChange	 INTEGER,
+prvtELMILastFullReport TimeStamp,
+prvtELMITimeOuts	 INTEGER,
+prvtELMIMsgISN		 INTEGER,
+prvtELMIInavlidProtocolVers INTEGER,
+prvtELMIEVCInvalidRefId	 INTEGER,
+prvtELMIInavlidMsgType INTEGER,   
+prvtELMIOOSIE		INTEGER,
+prvtELMIDuplicateIE INTEGER,
+prvtELMIMandatoryIEMissing INTEGER,   
+prvtELMIInavlidMandatoryIE INTEGER,      
+prvtELMIInvalidNonMandatoryIE INTEGER,
+prvtELMIUnrecognizedIE	INTEGER,
+prvtELMIUnexpectedIE INTEGER,
+prvtELMIShortMessage INTEGER
+
+}
+  
+
+prvtELMIStatusChange  OBJECT-TYPE
+SYNTAX INTEGER
+{
+up (1),
+down (2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"E-LMI operational status"
+::= { prvtELMIStatisticsEntry 1 }        
+
+prvtELMILastFullReport  OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"E-LMI 	Time of the last full status report."
+::= { prvtELMIStatisticsEntry 2 }  
+
+prvtELMITimeOuts  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of Status Timeouts."
+::= { prvtELMIStatisticsEntry 3 } 
+
+
+prvtELMIMsgISN  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of messages with Invalid Sequence Number."
+::= { prvtELMIStatisticsEntry 4 }            
+
+prvtELMIInavlidProtocolVers  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Invalid Protocol Version."
+::= { prvtELMIStatisticsEntry 5 }         
+
+prvtELMIEVCInvalidRefId  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Invalid Ethernet Virtual Connection Reference Id."
+::= { prvtELMIStatisticsEntry 6 }   
+
+prvtELMIInavlidMsgType  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Invalid Message Type."
+::= { prvtELMIStatisticsEntry 7 } 
+
+prvtELMIOOSIE  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Out of Sequence IE."
+::= { prvtELMIStatisticsEntry 8 }           
+
+prvtELMIDuplicateIE  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Duplicate IE."
+::= { prvtELMIStatisticsEntry 9 }  
+
+prvtELMIMandatoryIEMissing  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Mandatory IE Missing."
+::= { prvtELMIStatisticsEntry 10 } 
+
+prvtELMIInavlidMandatoryIE  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Invalid Mandatory IE."
+::= { prvtELMIStatisticsEntry 11 } 
+
+prvtELMIInvalidNonMandatoryIE  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Invalid non-Mandatory IE."
+::= { prvtELMIStatisticsEntry 12 }          
+
+prvtELMIUnrecognizedIE  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Unrecognized  IE."
+::= { prvtELMIStatisticsEntry 13 } 
+
+prvtELMIUnexpectedIE  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Unexpected  IE."
+::= { prvtELMIStatisticsEntry 14 }
+
+prvtELMIShortMessage  OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Short Message."
+::= { prvtELMIStatisticsEntry 15 }
+
+
+prvtELMIEVCTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtELMIEVCEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains objects for displaing EVC informations."
+::= { prvtELMIObjects 4 }        
+
+prvtELMIEVCEntry  OBJECT-TYPE
+SYNTAX PrvtELMIEVCEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry display information about EVC."
+INDEX { ifIndex, prvtELMIEVCId   }
+::= { prvtELMIEVCTable 1 } 
+
+PrvtELMIEVCEntry  ::= SEQUENCE{
+prvtELMIEVCId INTEGER,      
+prvtELMIServicesId Unsigned32,
+prvtELMIEVCStatus INTEGER,
+prvtELMIEVCType INTEGER
+}
+
+prvtELMIEVCId  OBJECT-TYPE
+SYNTAX INTEGER (1..65535)
+MAX-ACCESS accessible-for-notify  
+STATUS current
+DESCRIPTION
+"An integer that uniquely identifies EVC Refernces id."   
+::= {prvtELMIEVCEntry 1}         
+
+prvtELMIServicesId  OBJECT-TYPE
+SYNTAX Unsigned32 
+MAX-ACCESS read-only   
+STATUS current
+DESCRIPTION
+"An integer that uniquely identifies Services id."   
+::= {prvtELMIEVCEntry 2} 
+
+prvtELMIEVCStatus  OBJECT-TYPE
+SYNTAX INTEGER {
+non-active (0),
+new-non-active (1),
+active (2),
+new-active (3),
+partially-active(4),
+new-partially-active(5)
+}
+MAX-ACCESS read-only  
+STATUS current
+DESCRIPTION
+"EVC State."   
+::= {prvtELMIEVCEntry 3}      
+                     
+                     
+prvtELMIEVCType   OBJECT-TYPE
+SYNTAX INTEGER {
+point-to-point (1),
+multi-point-to-point (2)
+}
+MAX-ACCESS read-only  
+STATUS current
+DESCRIPTION
+"EVC Type."   
+::= {prvtELMIEVCEntry 4}    
+
+  
+prvtELMIMapEvcCEVlanTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtELMIMapEvcCEVlanEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains objects for displaying the map between EVC and CE-VLAN"
+::= { prvtELMIObjects 5 }       
+
+prvtELMIMapEvcCEVlanEntry   OBJECT-TYPE
+SYNTAX PrvtELMIMapEvcCEVlanEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry links EVC id with CE-VLAN id."
+INDEX { ifIndex, prvtELMIMapEVCId,  prvtELMIMapCeVlanId }
+::= { prvtELMIMapEvcCEVlanTable 1 }   
+
+
+PrvtELMIMapEvcCEVlanEntry ::= SEQUENCE{
+prvtELMIMapEVCId INTEGER,     
+prvtELMIMapCeVlanId INTEGER
+}       
+prvtELMIMapEVCId   OBJECT-TYPE
+SYNTAX INTEGER  (1..65535)
+MAX-ACCESS read-only  
+STATUS current
+DESCRIPTION
+"An integer that uniquely identifies EVC id."   
+::= {prvtELMIMapEvcCEVlanEntry 1} 
+
+prvtELMIMapCeVlanId   OBJECT-TYPE
+SYNTAX INTEGER (1..65535)
+MAX-ACCESS read-only  
+STATUS current
+DESCRIPTION
+"An integer that uniquely identifies CE-VLAN id."   
+::= {prvtELMIMapEvcCEVlanEntry 2} 
+
+                                            
+                                            
+prvtELMIStatus NOTIFICATION-TYPE
+OBJECTS { prvtELMIEnable, prvtELMIStatusChange }
+STATUS current
+DESCRIPTION
+"This notification is sent  when status of ELMI changes."
+::= {prvtELMINotifications 1}    
+
+ 
+
+prvtELMIChangeEVC NOTIFICATION-TYPE
+OBJECTS { prvtELMIEVCId }
+STATUS current
+DESCRIPTION
+"This notification is sent  when status of CE-VLAN ID/EVC Map per interface changes."
+::= {prvtELMINotifications 2}    
+
+END
+
+
+ 
diff --git a/MIBS/telco-systems/binos/PRVT-EPS-MIB b/MIBS/telco-systems/binos/PRVT-EPS-MIB
new file mode 100644
index 0000000..a4a4a32
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-EPS-MIB
@@ -0,0 +1,605 @@
+PRVT-EPS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	MODULE-IDENTITY,
+	OBJECT-TYPE,
+	NOTIFICATION-TYPE,
+	Unsigned32               FROM SNMPv2-SMI    -- [RFC2578]
+	TEXTUAL-CONVENTION,
+	RowStatus,
+	TruthValue               FROM SNMPv2-TC
+	MODULE-COMPLIANCE,
+	OBJECT-GROUP,
+	NOTIFICATION-GROUP       FROM SNMPv2-CONF   -- [RFC2580]
+	switch                   FROM PRVT-SWITCH-MIB
+	Dot1agCfmMepIdOrZero,
+	Dot1agCfmMDLevelOrNone   FROM IEEE8021-CFM-MIB
+	sdpInfoEntry						 FROM PRVT-SERV-MIB
+	;
+
+prvtEpsMib MODULE-IDENTITY
+	LAST-UPDATED "201004170000Z"
+	ORGANIZATION "BATM Advanced Communication"
+	CONTACT-INFO
+	" BATM/Telco Systems Support team
+	Email:
+	For North America: techsupport@telco.com
+	For North Europe: support@batm.de, info@batm.de
+	For the rest of the world: techsupport@telco.com"
+	DESCRIPTION
+	"Private MIB supporting Linear Ethernet Protection Switching (ITU-T G.8031)"
+
+-- revision history
+	REVISION       "201103230000Z"
+	DESCRIPTION
+	"Added Protection Counter"
+	REVISION       "201004170000Z"
+	DESCRIPTION
+	"Add protection failure trap. Add recovery traps."
+	REVISION       "200907150000Z"
+	DESCRIPTION
+	"Updates for 9.4 release"
+	REVISION       "200903240000Z"
+	DESCRIPTION
+	"Initial"
+	::= { switch 132 }
+
+prvtEpsMibNotifications   OBJECT IDENTIFIER ::= { prvtEpsMib 0 }
+prvtEpsMibObjects         OBJECT IDENTIFIER ::= { prvtEpsMib 1 }
+
+PrvtEpsRequestStateType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       ""
+    REFERENCE
+       "G.8031 clause 11.3"
+    SYNTAX      INTEGER {
+                  rsNone                       (-1),
+                  rsNoRequest                  (0),
+                  rsDoNotRevert                (1),
+                  rsReverseRequest             (2),
+                  rsExercise                   (4),
+                  rsWaitToRestore              (5),
+                  rsClear                      (6),
+                  rsManualSwitch               (7),
+                  rsSignalDegrade              (9),
+                  rsSignalFail                 (11),
+                  rsForcedSwitch               (13),
+                  rsSignalFailForProtection    (14),
+                  rsLockoutOfProtection        (15)
+                }
+
+PrvtEpsProtectionType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       ""
+    REFERENCE
+       "G.8031 clause 11.4"
+    SYNTAX      INTEGER {
+                  pt1Plus1               (0),
+                  pt1To1                 (1)
+                }
+
+PrvtEpsDirectionType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       ""
+    REFERENCE
+       "G.8031 clause 11.4"
+    SYNTAX      INTEGER {
+                  dtUnidirectional        (0),
+                  dtBidirectional         (1)
+                }
+
+PrvtEpsActivePathType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       ""
+    REFERENCE
+       "G.8031 clause 11.6"
+    SYNTAX      INTEGER {
+                  working            (0),
+                  protection         (1)
+                }
+
+PrvtEpsMonitoringType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       ""
+    SYNTAX      INTEGER {
+                  none        (0),
+                  cfmPM       (1),
+                  saa         (2)
+                }
+
+PrvtEpsDefectFopType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       ""
+    REFERENCE
+       "G.8031 clause 11.15"
+    SYNTAX      BITS {
+                  fullyIncompatibleProvisioning    (0),
+                  protectionSwitchingIncomplete    (1),
+                  protectionConfigurationMismatch  (2),
+                  epsConfigurationMismatch         (3)
+                }
+
+PrvtEpsPathStatusType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Status of the primary or backup links"
+    SYNTAX      INTEGER {
+                  psOk         (0),
+                  psFailed     (1)
+                }
+
+prvtEpsService OBJECT IDENTIFIER ::= { prvtEpsMibObjects 1 }
+
+prvtEpsServiceTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtEpsServiceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"The table contains Ethernet Protection Switching services information."
+	::= { prvtEpsService 1 }
+
+prvtEpsServiceEntry OBJECT-TYPE
+	SYNTAX PrvtEpsServiceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"Ethernet Protection Switching information about a specific service."
+	INDEX           { prvtEpsSvcId }
+	::= { prvtEpsServiceTable 1 }
+
+PrvtEpsServiceEntry ::= SEQUENCE {
+  prvtEpsSvcId						Unsigned32,
+	prvtEpsServiceCfmMdLevel            Dot1agCfmMDLevelOrNone,
+	prvtEpsServicePrimaryLocalCfmMep    Dot1agCfmMepIdOrZero,
+	prvtEpsServicePrimaryRemoteCfmMep   Dot1agCfmMepIdOrZero,
+	prvtEpsServiceSecondaryLocalCfmMep  Dot1agCfmMepIdOrZero,
+	prvtEpsServiceSecondaryRemoteCfmMep Dot1agCfmMepIdOrZero,
+	prvtEpsServiceLocalState            PrvtEpsRequestStateType,
+	prvtEpsServiceHoldOffTimer          Unsigned32,
+	prvtEpsServiceWaitToRestoreTimer    Unsigned32,
+	prvtEpsServiceApsChannel            TruthValue,
+	prvtEpsServiceProtection            PrvtEpsProtectionType,
+	prvtEpsServiceDirection             PrvtEpsDirectionType,
+	prvtEpsServiceRevertive             TruthValue,
+	prvtEpsServiceActivePath            PrvtEpsActivePathType,
+	prvtEpsServiceDegradeTestType       PrvtEpsMonitoringType,
+    prvtEpsServiceDegradeTestOwner      OCTET STRING,
+	prvtEpsServiceDegradeTestName       OCTET STRING,
+	prvtEpsServiceDegradeTestEnable     TruthValue,
+	prvtEpsServiceDefectFop             PrvtEpsDefectFopType,
+	prvtEpsServiceOperationalStatus     TruthValue,
+	prvtEpsServicePrimaryStatus         PrvtEpsPathStatusType,
+	prvtEpsServiceSecondaryStatus       PrvtEpsPathStatusType,
+	prvtEpsServiceRemoteState           PrvtEpsRequestStateType,
+	prvtEpsServiceRemoteApsChannel      TruthValue,
+	prvtEpsServiceRemoteProtection      PrvtEpsProtectionType,
+	prvtEpsServiceRemoteDirection       PrvtEpsDirectionType,
+	prvtEpsServiceRemoteRevertive       TruthValue,
+	prvtEpsServiceAdminFreeze           TruthValue,
+	prvtEpsServiceAdminStatus			INTEGER,
+	prvtEpsServiceRowStatus             RowStatus,
+	prvtEpsServiceProtectionCounter     Unsigned32
+}
+
+prvtEpsSvcId OBJECT-TYPE
+    SYNTAX          Unsigned32 (0..4294967295)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "The service ID."
+    ::= { prvtEpsServiceEntry 1 }
+
+prvtEpsServiceCfmMdLevel OBJECT-TYPE
+	SYNTAX Dot1agCfmMDLevelOrNone
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Value of the CFM MD level where the protected domain is situated."
+	DEFVAL { -1 }
+	::= { prvtEpsServiceEntry 2 }
+
+prvtEpsServicePrimaryLocalCfmMep OBJECT-TYPE
+	SYNTAX Dot1agCfmMepIdOrZero
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Primary local CFM MEP Id."
+	DEFVAL { 0 }
+	::= { prvtEpsServiceEntry 3 }
+
+prvtEpsServicePrimaryRemoteCfmMep OBJECT-TYPE
+	SYNTAX Dot1agCfmMepIdOrZero
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Primary remote CFM MEP Id."
+	DEFVAL { 0 }
+	::= { prvtEpsServiceEntry 4 }
+
+prvtEpsServiceSecondaryLocalCfmMep OBJECT-TYPE
+	SYNTAX Dot1agCfmMepIdOrZero
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Backup local CFM MEP Id."
+	DEFVAL { 0 }
+	::= { prvtEpsServiceEntry 5 }
+
+prvtEpsServiceSecondaryRemoteCfmMep OBJECT-TYPE
+	SYNTAX Dot1agCfmMepIdOrZero
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Backup remote CFM MEP Id."
+	DEFVAL { 0 }
+	::= { prvtEpsServiceEntry 6 }
+
+prvtEpsServiceLocalState OBJECT-TYPE
+	SYNTAX PrvtEpsRequestStateType
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Protection state of the local side. The values can be set:
+	 rsManualSwitch(7), rsClear(6) or rsLockoutOfProtection(15).
+	 The values can be get:
+	 rsNoRequest                     (0),
+	 rsDoNotRevert                   (1),
+	 rsReverseRequest                (2),
+	 rsExercise                      (4),
+	 rsWaitToRestore                 (5),
+	 rsClear                         (6),
+	 rsManualSwitch                  (7),
+	 rsSignalDegrade                 (9),
+	 rsSignalFail                   (11),
+	 rsForcedSwitch                 (13),
+	 rsSignalFailForProtection      (14),
+	 rsLockoutOfProtection          (15)."
+	::= { prvtEpsServiceEntry 7 }
+
+prvtEpsServiceHoldOffTimer OBJECT-TYPE
+	SYNTAX Unsigned32 (0..10000)
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Value of the Hold Off timer in msec (increments of 100msec)."
+	REFERENCE "G.8031 clause 11.12"
+	DEFVAL { 0 }
+	::= { prvtEpsServiceEntry 8 }
+
+prvtEpsServiceWaitToRestoreTimer OBJECT-TYPE
+	SYNTAX Unsigned32 (0|5..12)
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Value of the Wait To Restore timer in seconds (0 to disable it)."
+	REFERENCE "G.8031 clause 11.13"
+	DEFVAL { 5 }
+	::= { prvtEpsServiceEntry 9 }
+
+prvtEpsServiceApsChannel OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Active APS communication."
+	::= { prvtEpsServiceEntry 10 }
+
+prvtEpsServiceProtection OBJECT-TYPE
+	SYNTAX PrvtEpsProtectionType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Type of protection (1+1 or 1:1)."
+	::= { prvtEpsServiceEntry 11 }
+
+prvtEpsServiceDirection OBJECT-TYPE
+	SYNTAX PrvtEpsDirectionType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Type of protection (unidirectional or bidirectional)."
+	::= { prvtEpsServiceEntry 12 }
+
+prvtEpsServiceRevertive OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Protection type (revertive or non-revertive)."
+	::= { prvtEpsServiceEntry 13 }
+
+prvtEpsServiceActivePath OBJECT-TYPE
+	SYNTAX PrvtEpsActivePathType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Protected service active path."
+	DEFVAL { working }
+	::= { prvtEpsServiceEntry 14 }
+
+prvtEpsServiceDegradeTestType OBJECT-TYPE
+	SYNTAX PrvtEpsMonitoringType
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Type of test used for monitoring signal degrade situations."
+	DEFVAL { 0 }
+	::= { prvtEpsServiceEntry 15 }
+
+prvtEpsServiceDegradeTestOwner OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE(0..32))
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+    "Owner of the SAA test used for monitoring."
+    DEFVAL { '00'H }
+    ::= { prvtEpsServiceEntry 16 }
+
+prvtEpsServiceDegradeTestName OBJECT-TYPE
+	SYNTAX OCTET STRING (SIZE(0..32))
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Name of the CFM or SAA test used for monitoring."
+	DEFVAL { '00'H }
+	::= { prvtEpsServiceEntry 17 }
+
+prvtEpsServiceDegradeTestEnable OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Start/stop CFM or SAA test for performance monitoring."
+	DEFVAL { false }
+	::= { prvtEpsServiceEntry 18 }
+
+prvtEpsServiceDefectFop OBJECT-TYPE
+	SYNTAX PrvtEpsDefectFopType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Defects noticed by APS protocol could be either none or a composition of the bits (0-3):
+	 fullyIncompatibleProvisioning(0)   - occures by the reception of three APS frames with the
+	  incompatible 'B' bit value during the period of 22.5 seconds;
+	 protectionSwitchingIncomplete(1)   - occures if the transmitted 'Requested Signal' and the
+	  received 'Bridged Signal' do not match for a period of 50ms or longer;
+	 protectionConfigurationMismatch(2) - working/protection configuration mismatch, occures by
+	  the reception of three APS frames from the working transport entity during the period of
+	  22.5 seconds;
+	 epsConfigurationMismatch(3)        - provisioning mismatch - for example the local side is
+	  set in revertive mode, the remote side is set in non revertive mode."
+	::= { prvtEpsServiceEntry 19 }
+
+prvtEpsServiceOperationalStatus OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"The purpose of this status is to identify to the User whether
+	 this service is ready for running. The operational status can
+	 be up or down. When creating the service the operational
+	 status will be down. Receiving CCMs from both transport
+	 entities and establishment of APS on the protection transport
+	 entity will bring the operational status to up."
+	::= { prvtEpsServiceEntry 20 }
+
+prvtEpsServicePrimaryStatus OBJECT-TYPE
+	SYNTAX PrvtEpsPathStatusType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Primary path state (psOk(0) or psFailed(1))."
+	::= { prvtEpsServiceEntry 21 }
+
+prvtEpsServiceSecondaryStatus OBJECT-TYPE
+	SYNTAX PrvtEpsPathStatusType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Secondary path state (psOk(0) or psFailed(1))."
+	::= { prvtEpsServiceEntry 22 }
+
+prvtEpsServiceRemoteState OBJECT-TYPE
+	SYNTAX PrvtEpsRequestStateType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Protection state of the remote side.
+	 The values can be get:
+	 rsNoRequest                     (0),
+	 rsDoNotRevert                   (1),
+	 rsReverseRequest                (2),
+	 rsExercise                      (4),
+	 rsWaitToRestore                 (5),
+	 rsClear                         (6),
+	 rsManualSwitch                  (7),
+	 rsSignalDegrade                 (9),
+	 rsSignalFail                   (11),
+	 rsForcedSwitch                 (13),
+	 rsSignalFailForProtection      (14),
+	 rsLockoutOfProtection          (15)."
+	::= { prvtEpsServiceEntry 23 }
+
+prvtEpsServiceRemoteApsChannel OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Active APS communication reported by the remote."
+	::= { prvtEpsServiceEntry 24 }
+
+prvtEpsServiceRemoteProtection OBJECT-TYPE
+	SYNTAX PrvtEpsProtectionType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Type of protection (1+1 or 1:1) reported by the remote."
+	::= { prvtEpsServiceEntry 25 }
+
+prvtEpsServiceRemoteDirection OBJECT-TYPE
+	SYNTAX PrvtEpsDirectionType
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Type of protection (unidirectional or bidirectional) reported by the remote."
+	::= { prvtEpsServiceEntry 26 }
+
+prvtEpsServiceRemoteRevertive OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Protection type (revertive or non-revertive) reported by the remote."
+	::= { prvtEpsServiceEntry 27 }
+
+
+prvtEpsServiceAdminFreeze OBJECT-TYPE
+		SYNTAX TruthValue
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Used to freeze the state of the protection service."
+	   DEFVAL          { false }
+	::= { prvtEpsServiceEntry 28 }
+
+
+prvtEpsServiceAdminStatus OBJECT-TYPE
+		SYNTAX INTEGER  {
+	                up ( 1 ),
+	                down ( 2 )
+					}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Administrative status of the protection."
+	   DEFVAL          { 2 }
+	::= { prvtEpsServiceEntry 29 }
+
+prvtEpsServiceRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"The status of the row.
+	 The writable columns in a row can not be changed if the row
+	 is active. All columns must have a valid value before a row
+	 can be activated."
+	::= { prvtEpsServiceEntry 30 }
+
+prvtEpsServiceProtectionCounter OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Counts how many times the service has gone to Protection."
+::= { prvtEpsServiceEntry 31 }
+
+
+
+
+prvtEpsDefectAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsServiceOperationalStatus,
+                  prvtEpsServiceDefectFop
+                }
+    STATUS      current
+    DESCRIPTION
+       "1. EPS service is either operational or not operational;
+        2. Failure of protocol defects."
+    ::= { prvtEpsMibNotifications 1 }
+
+prvtEpsSwitchoverAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsServiceActivePath
+                }
+    STATUS      current
+    DESCRIPTION
+       "The alarm is issued if the active link is changed,
+        pointing to the path where the switchover occured."
+    ::= { prvtEpsMibNotifications 2 }
+
+
+prvtEpsLostCommunication NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId
+                }
+    STATUS      current
+    DESCRIPTION
+       "The alarm is issued in case of non reception of APS frames
+        in three consecutive intervals each representing 5 seconds."
+    ::= { prvtEpsMibNotifications 3 }
+
+prvtEpsRestoredCommunication NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId
+                }
+    STATUS      current
+    DESCRIPTION
+       "APS frames are received normally after APS communication failure."
+    ::= { prvtEpsMibNotifications 4 }
+
+
+prvtEpsSignalFailDetected NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId
+                }
+    STATUS      current
+    DESCRIPTION
+       "The alarm is issued in case of CCMs are not received
+        and (3.5 * CCMtime(CCMinterval)) has expired."
+    ::= { prvtEpsMibNotifications 5 }
+
+prvtEpsSignalDegradeDetected NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId
+                }
+    STATUS      current
+    DESCRIPTION
+       "The alarm is issued in case of monitored error threshold is crossed:
+        1W Jitter error,
+        2W Jitter error,
+        Latency error,
+        Frame loss error."
+    ::= { prvtEpsMibNotifications 6 }
+
+prvtEpsProtctSignalFailDetected NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId
+                }
+    STATUS      current
+    DESCRIPTION
+       "The alarm is issued in case of CCMs are not received on the protected link
+        and (3.5 * CCMtime(CCMinterval)) has expired or the protected link is down."
+    ::= { prvtEpsMibNotifications 7 }
+
+prvtEpsSignalFailRecovery NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId
+                }
+    STATUS      current
+    DESCRIPTION
+       "The alarm is issued in case of CCMs start to be received
+	    correctly again after a prvtEpsSignalFailDetected alarm occured
+        and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up ."
+    ::= { prvtEpsMibNotifications 8 }
+
+prvtEpsSignalDegradeRecovery NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId
+                }
+    STATUS      current
+    DESCRIPTION
+       "The alarm is issued in case of monitored error threshold is crossed bellow limis:
+        1W Jitter error,
+        2W Jitter error,
+        Latency error,
+        Frame loss error."
+    ::= { prvtEpsMibNotifications 9 }
+
+prvtEpsProtctSignalFailRecovery NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId
+                }
+    STATUS      current
+    DESCRIPTION
+       "The alarm is issued in case of CCMs start to be received correctly again 
+        on the protected link after a prvtEpsProtctSignalFailDetected alarm occured
+        and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up ."
+    ::= { prvtEpsMibNotifications 10 }
+
+END
\ No newline at end of file
diff --git a/MIBS/telco-systems/binos/PRVT-INTERWORKING-OS-MIB b/MIBS/telco-systems/binos/PRVT-INTERWORKING-OS-MIB
new file mode 100644
index 0000000..32d9a29
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-INTERWORKING-OS-MIB
@@ -0,0 +1,839 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: prvt-interworking-os-mib.mib
+-- *********************************************************************
+-- (c) Copyright, 1998, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+PRVT-INTERWORKING-OS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+
+MODULE-IDENTITY,
+OBJECT-TYPE,
+IpAddress,
+Integer32
+FROM SNMPv2-SMI
+
+DisplayString,
+TruthValue,
+MacAddress
+FROM SNMPv2-TC
+
+NOTIFICATION-TYPE
+FROM SNMPv2-SMI
+
+prvt-products
+FROM PRVT-SWITCH-MIB
+
+usmUserSecurityName
+FROM SNMP-USER-BASED-SM-MIB;
+
+prvtInterworkOsMib MODULE-IDENTITY
+LAST-UPDATED "200804090000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"The MIB enables display configuration of the device OS features."
+
+-- revision history
+REVISION "200804090000Z"
+DESCRIPTION
+"setExecutetrap varbind change" 
+REVISION "200803310000Z"
+DESCRIPTION
+"Removed configurationChanged, see PrvtConfigChange.mib." 
+
+REVISION "200801010000Z"
+DESCRIPTION
+"Removed redefined OIDs in private vendor extension definitions." 
+
+REVISION "200502160000Z"
+DESCRIPTION
+"Fixed spelling errors and changed the contact info." 
+
+REVISION "200412200000Z"
+DESCRIPTION
+"Added the configurationChanged and snmpSetExecuted notifications."
+
+REVISION "200403100000Z"
+DESCRIPTION
+"Modified the description of the managementLoadExecute object 
+to clarify that the startup-config is replaced at 
+configuration download."
+
+
+REVISION "200305080000Z"
+DESCRIPTION
+"Move to SMI-V2."
+
+REVISION "200212120000Z"
+DESCRIPTION
+"Add detection for CPU RAM size."
+
+REVISION "200211260000Z"
+DESCRIPTION
+"Add CPU group."
+
+
+REVISION "200211170000Z"
+DESCRIPTION
+"Enable loading VDSL E2 firmware. 
+Add support for reload."
+
+REVISION "200104190000Z"
+DESCRIPTION
+"Add management group."
+
+REVISION "200103190000Z"
+DESCRIPTION
+"Initial version."
+
+::= { software 1 }
+
+software OBJECT IDENTIFIER ::= { prvt-products 111 }
+
+prvtInterworkOsNotifications OBJECT IDENTIFIER ::= { prvtInterworkOsMib 0 }
+version OBJECT IDENTIFIER ::= {prvtInterworkOsMib 1}
+option OBJECT IDENTIFIER ::= {prvtInterworkOsMib 2}
+management OBJECT IDENTIFIER ::= {prvtInterworkOsMib 3}
+cpu OBJECT IDENTIFIER ::= {prvtInterworkOsMib 4}
+prvtInterworkOsConformance OBJECT IDENTIFIER ::= { prvtInterworkOsMib 5 }
+
+-- 
+-- version group
+-- 
+
+bootVersionNumber OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object identifies version number of the Boot program"
+::= { version 1 }
+
+bootVersionDate OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object identifies creation date/time of the Boot program"
+::= { version 2 }
+
+bootVersionString OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object contains text for the current version of the Boot program"
+::= { version 3 }
+
+oSversionNumber OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object identifies version number of the OS"
+::= { version 4 }
+
+oSversionDate OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object identifies creation date/time of the OS"
+::= { version 5 }
+
+oSversionString OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object contains text for the current version of the OS"
+::= { version 6 }
+
+appletVersionNumber OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object contains text for the current version of the embedded 
+applet"
+::= { version 7 }
+
+appletVersionDate OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object contains text for the creation date of the current embedded 
+applet version"
+::= { version 8 }
+-- 
+-- option group
+-- 
+
+optionInstalled OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object identifies creation date/time of the OS"
+::= { option 1 }
+
+-- 
+-- management group
+-- 
+
+--
+-- Connectivity Information
+--
+-- This group is meant to be a collection of controls and data
+-- for connectivity.
+--
+managementConnectivity OBJECT IDENTIFIER ::= {management 1}
+
+managementConnectivityMACAddr OBJECT-TYPE
+SYNTAX MacAddress
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Get the agent MAC address."
+::= { managementConnectivity 1 }
+
+managementConnectivityIpAddress OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Set IP Address for the device."
+::= { managementConnectivity 2 }
+
+managementConnectivityIPNetMask OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Set IP NetMask for the device."
+::= { managementConnectivity 3 }
+
+managementIPGateAddress OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Set Gateway Address for the device - only applies for devices without
+L3 capabilities."
+::= { managementConnectivity 4 }
+
+managementSerialBaud OBJECT-TYPE
+SYNTAX INTEGER {
+baud2400(1),
+baud9600(2),
+baud19200(3),
+baud38400(4)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The Serial port BAUD Rate. Attributes are 8 Start Bits,
+no parity, and 1 stop bits (8N1) and Hardware Flow Control.
+Valid values are 2400, 9600, 19200, and 38400."
+::= { managementConnectivity 5 }
+
+--
+-- managementLoad Group
+--
+-- This group is meant to be a collection of controls and data
+-- that determine the file download and upload configuration
+-- and mode.
+--
+
+managementLoad OBJECT IDENTIFIER ::= {management 2}
+
+managementLoadTftpServerAddress OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Set IP Address for the TFTP server used for downloading
+and uploading files."
+::= { managementLoad 1 }
+
+managementLoadFileName OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..64))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Set TFTP file path and name."
+::= { managementLoad 2 }
+
+managementLoadType OBJECT-TYPE
+SYNTAX INTEGER {
+application(1),
+boot(2),
+configuration(3),
+java(4),
+vdsl-E2(5)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The type of file to download or upload 
+upon a managementLoadExecute."
+::= { managementLoad 3 }
+
+managementLoadExecute OBJECT-TYPE
+SYNTAX INTEGER {
+noop(1), -- no operation
+download(2), -- Application, Boot, java or Configuration
+upload(3) -- Configuration only
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Execute file download or upload procedure. A SET of this
+object starts the load procedure. Note that the Application
+and Boot images can only be downloaded. The Configuration
+file can be uploaded and downloaded. When a Configuration file
+is downloaded, it replaces the startup-config file in NVRAM. 
+
+A GET of this object will return a noop (1). Also, when the user chooses to 
+upload the configuration, it is the startup-config that is copied to the remote host.
+Use managementLoadExecuteStatus to determine the status of the executed load."
+::= { managementLoad 4 }
+
+managementLoadExecuteStatus OBJECT-TYPE
+SYNTAX INTEGER {
+not-started(1),
+in-progress(2),
+success(3),
+error-connection(4),
+error-filename(5),
+error-fault(6)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Provides status on the execute file load procedure.
+The status return is given by one of the enumerated codes
+not-started (download has not yet started)
+in-progress (download has not yet finished)
+success (download has finished successfully)
+error-connection (download cannot connect)
+error-filename (download has bad image path/filename)
+error-fault (download has fault condition on device)."
+::= { managementLoad 5 }
+
+--
+-- Miscellaneous Information
+--
+-- This group is meant to be a collection of controls and data
+-- that do not require a group of their own, or fall into the
+-- category of "miscellaneous". 
+--
+
+managementMisc OBJECT IDENTIFIER ::= {management 3}
+
+managementMiscSaveToNvm OBJECT-TYPE
+SYNTAX INTEGER {
+noop(1), -- no operation
+save(2) -- save all configuration parameters to NVM
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"When set to save (2), all nonvolatile configuration
+parameters are saved to NVM (Nonvolatile Memory). NVM save
+operations may be slow (e.g., erasing/writing Flash device).
+Consequently, all (or many) updates should be made before
+saving to NVM. A get operation always returns noop (1)"
+::= { managementMisc 1 }
+
+managementMiscReset OBJECT-TYPE
+SYNTAX INTEGER {
+noop(1), 
+reset(2), 
+reset-to-defaults(3), 
+save-and-reset(4) -- save config and then reset the unit
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Physically performs a hardware reset of the unit.
+Use with care. A reset (2) resets the unit, the
+reset-to-defaults (3) resets the configuration file
+to factory defaults and then resets the unit, the value of
+save-and-reset (4) saves the config and then resets the unit and 
+noop (1) does nothing. 
+A value of noop (1) is always returned 
+for a GET operation."
+::= { managementMisc 2 }
+
+managementMiscReload OBJECT-TYPE
+SYNTAX INTEGER {
+noop(1), 
+save-and-reload(2) -- save config and then reload the software
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Reload the unit software, the unit hardware will not 
+be affected. A value of noop (1) is always returned for a 
+GET operation."
+::= { managementMisc 3 }
+
+managementMiscReloadInTime OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (4))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Indicates time for scheduled reload without save in hour:min.
+octets contents range
+1 day 0x01..0x1f (1-31)
+2 month 0x01..0x0C (1..12)
+where january = 1 december = 12
+3 hour 0x01..0x17 (0..23)
+4 min 0x01..3B (0..59)
+For example: 0x01 0x01 0x01 0x01 means 1 January 01:01.
+To stop scheduled reload set it to 0x00 0x00 0x00 0x00"
+::= { managementMisc 4 }
+
+managementMiscReloadAtTime OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (4))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Indicates time for scheduled reload without save at day:month:hour:min.
+octets contents range
+1 day 0x01..0x1f (1-31)
+2 month 0x01..0x0C (1..12)
+where january = 1 december = 12
+3 hour 0x01..0x17 (0..23)
+4 min 0x01..3B (0..59)
+For example: 0x01 0x01 0x01 0x01 means 1 January 01:01.
+To stop scheduled reload set it to 0x00 0x00 0x00 0x00"
+::= { managementMisc 5 }
+
+managementMiscReloadSaveInTime OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (4))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Indicates time for scheduled reload with save in hour:min.
+octets contents range
+1 day 0x01..0x1f (1-31)
+2 month 0x01..0x0C (1..12)
+where january = 1 december = 12
+3 hour 0x01..0x17 (0..23)
+4 min 0x01..3B (0..59)
+For example: 0x01 0x01 0x01 0x01 means 1 January 01:01.
+To stop scheduled reload set it to 0x00 0x00 0x00 0x00"
+::= { managementMisc 6 }
+
+managementMiscReloadSaveAtTime OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (4))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Indicates time for scheduled reload with save at day:month:hour:min.
+octets contents range
+1 day 0x01..0x1f (1-31)
+2 month 0x01..0x0C (1..12)
+where january = 1 december = 12
+3 hour 0x01..0x17 (0..23)
+4 min 0x01..3B (0..59)
+For example: 0x01 0x01 0x01 0x01 means 1 January 01:01.
+To stop scheduled reload set it to 0x00 0x00 0x00 0x00"
+::= { managementMisc 7 }
+
+managementLicense OBJECT IDENTIFIER ::= {management 4}
+
+managementOptionSupportStatus OBJECT-TYPE
+SYNTAX INTEGER { reserved0 (0), -- reserved
+reserved1 (1), -- reserved
+reserved2 (2), -- reserved
+reserved3 (3), -- reserved
+reserved4 (4), -- reserved
+reserved5 (5), -- reserved
+reserved6 (6), -- reserved
+reserved7 (7), -- reserved
+reserved8 (8), -- reserved
+reserved9 (9), -- reserved
+licNotSpecified(10), -- the device is without license
+licBasic(11), -- SWITCH license registered
+licML(12), -- ML license
+licAdvML(13), -- Adv-ML license
+reserved14 (14), -- reserved
+reserved15 (15), -- reserved
+reserved16 (16), -- reserved
+reserved17 (17), -- reserved
+reserved18 (18), -- reserved
+reserved19 (19), -- reserved
+reserved20 (20), -- reserved
+reserved21 (21), -- reserved
+reserved22 (22), -- reserved
+reserved23 (23), -- reserved
+reserved24 (24), -- reserved
+reserved25 (25), -- reserved
+reserved26 (26), -- reserved
+reserved27 (27), -- reserved
+reserved28 (28), -- reserved
+reserved29 (29), -- reserved
+reserved30 (30), -- reserved 
+reserved31 (31) -- reserved 
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Indicates active software support options (license)."
+::= { managementLicense 1 }
+
+managementOptionSupportKey OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..32))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specify the software support option key (license). After set, device must be reloaded the new option to take affect."
+::= { managementLicense 2 }
+
+managementOptionSupportAddress OBJECT-TYPE 
+SYNTAX IpAddress
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Shows the address of SNMP NMS that has configured last the option."
+::= { managementLicense 3 }
+
+managementOptionSupportL3Capable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Indicates if the swicth is capable for L3 features
+- true The switch is capable for L3 features 
+- false The switch is not capable for L3 features
+"
+DEFVAL { true }
+::= { managementLicense 4 }
+
+prvtBootConfigUpgrade OBJECT IDENTIFIER ::= {management 5}
+
+prvtBootUpgradeSrcURI OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The object represents an address from where the application
+will be copied and used by the device. The address 
+must be given in a valid URI format. It will be used by all 
+booting mechnisms as a source from where to find the application.
+So it can point to either local folder or remote device. 
+
+Example:
+tftp://10.3.71.45/MyApps/Imagev1.5.Z
+local://Usr/Imagev1.5.Z 
+
+If there is no value set, the device will boot with local application
+given in prvtBootApplicationNameURI object"
+REFERENCE "See rfc3986"
+::= { prvtBootConfigUpgrade 1 }
+
+prvtBootApplicationNameURI OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object represents the name of the application to be used by 
+the network device to boot. The name of the application is given 
+in URI format to indicate the storage device. Every network device 
+can have few localy saved application files copied in different 
+storage devices: local file system, flash etc. The user can choose 
+one of them by setting the starage device and the application name.
+
+Example: 
+local://Imagev1.5.Z, 
+flash://Imagev1.5.Z 
+
+If this object is empty, the device will boot from the network using 
+the remote application given in prvtBootUpgradeSrcURI"
+REFERENCE "See rfc3986"
+::= { prvtBootConfigUpgrade 2 }
+
+prvtBootConfigURI OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object represents the configuration file's name of a network device. 
+The value must be set in URI format. It can point to either local or remote 
+configuration file.
+
+Example:
+local://Usr/my_startup.cfg, 
+ftp://myuser:mypass@netaddress/MyCfgs/startup.cfg
+
+This field is optional. If it is empty, the standart startup config will be used."
+REFERENCE "See rfc3986"
+::= { prvtBootConfigUpgrade 3 }
+
+prvtBootUpgradeCmd OBJECT-TYPE
+SYNTAX INTEGER {
+none(0), -- this will be invalid value 
+ready(1), -- the common return value on get and next requests
+apply(2),
+applyExec(3) 
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This field is used to apply the configuration. When a get request is 
+executed, the returned value should be always ready. When apply(2)
+command is executed, the upgrade settings are applied. Alternative, 
+when applyExec(3) command is executed, the upgrade process is started.
+"
+DEFVAL { ready }
+::= { prvtBootConfigUpgrade 4 }
+
+prvtBootOperStatus OBJECT-TYPE
+SYNTAX INTEGER {
+unknown(0), -- invalid value
+ready(1),
+notReady(2),
+upgradeInProgress(3)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The object is used to show the current status of the upgrating process. The
+default value is ready(1), indicating that the process is idle. when the value 
+is set to notReady(2), the device upgrading mechanism is not correctly configured. 
+upgradeInProgress(3) indicates upgrading process have started and haven't finished
+yet."
+DEFVAL { ready }
+::= { prvtBootConfigUpgrade 5 }
+
+prvtBootErrorCondition OBJECT-TYPE
+SYNTAX INTEGER {
+noError(0),
+genericError(1),
+copyFailed(2),
+downloadFailed(3),
+freeSpaceError(4),
+validationFailed(5),
+backupFailed(6),
+inProgressError(7),
+consistencyError(8),
+fileSystemError(9),
+profileNameError(10),
+profileError(11),
+fileNameError(12),
+pathError(13),
+zFileError(14),
+cannotFindFile(15),
+defApplicationProfileError(16),
+configProfileError(17),
+bootDevProfileError(18),
+ftpServerProfileError(19),
+ftpUserProfileError(20),
+ftpPassProfileError(21)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The object can be used for feedback. How the upgrading process have finished"
+DEFVAL{ noError }
+::= { prvtBootConfigUpgrade 6 }
+
+
+-- 
+-- CPU group
+-- 
+
+cpuMonitoring OBJECT IDENTIFIER ::= {cpu 1}
+
+cpuMonitoringStatus OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The object shows the status of the CPU monitor"
+::= { cpuMonitoring 1 }
+
+cpuMonitoringUtilization OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The object shows the current CPU utilization"
+::= { cpuMonitoring 2 }
+
+cpuRedundancy OBJECT IDENTIFIER ::= {cpu 2}
+
+cpuHwRedundancySupport OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object shows if the backplan of this unit support CPU redundancy."
+::= { cpuRedundancy 1 }
+
+cpuRedundancyTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CpuRedundancyEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains the CPU redundancy information."
+::= { cpuRedundancy 2 }
+
+cpuRedundancyEntry OBJECT-TYPE
+SYNTAX CpuRedundancyEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Information about one CPU"
+INDEX { cpuId }
+::= { cpuRedundancyTable 1 }
+
+CpuRedundancyEntry ::= SEQUENCE {
+cpuId Integer32,
+cpuName DisplayString,
+cpuStatus INTEGER,
+cpuRedundancySupport TruthValue,
+cpuSWVersionString DisplayString
+}
+
+cpuId OBJECT-TYPE
+SYNTAX Integer32 (0..256)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The ID of the CPU in the system"
+::= { cpuRedundancyEntry 1 }
+
+cpuName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Textual representation of the CPU"
+::= { cpuRedundancyEntry 2 }
+
+cpuStatus OBJECT-TYPE
+SYNTAX INTEGER {
+active(1),
+standby(2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The CPU status"
+::= { cpuRedundancyEntry 3 }
+
+cpuRedundancySupport OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object shows if the CPU card supports redundancy."
+::= { cpuRedundancyEntry 4 }
+
+cpuSWVersionString OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The OS version currently running on the CPU"
+::= { cpuRedundancyEntry 5 }
+
+cpuHW OBJECT IDENTIFIER ::= {cpu 3}
+
+cpuRAMsize OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object returns the CPU card RAM size"
+::= { cpuHW 1 }
+
+-- Notifications for use by prvtInterworkOsMib
+
+
+imageCrcCheckFailed NOTIFICATION-TYPE
+OBJECTS { managementLoadTftpServerAddress, managementLoadFileName}
+STATUS current
+DESCRIPTION
+"The imageCrcCheckFailed notification indicates that the 
+image loaded via TFTP has not passed the CRC check 
+and has been discarded."
+::= {prvtInterworkOsNotifications 1}
+
+configurationLoadFailed NOTIFICATION-TYPE
+OBJECTS { managementLoadTftpServerAddress, managementLoadFileName}
+STATUS current
+DESCRIPTION
+"The configurationLoadFailed notification indicates that
+the sending agent did not succeed to upload or download
+the configuration file."
+::= {prvtInterworkOsNotifications 2}
+
+unauthorizedAccessViaCLI NOTIFICATION-TYPE
+-- OBJECTS { }
+STATUS current
+DESCRIPTION
+"The unauthorizedAccessViaCLI notification indicates that 
+the last attempt to login to the device via CLI cannot 
+be authorized."
+::= {prvtInterworkOsNotifications 3}
+
+snmpSetExecuted NOTIFICATION-TYPE
+OBJECTS { usmUserSecurityName }
+STATUS current
+DESCRIPTION
+"This notification indicates that a successful set request has been performed."
+::= {prvtInterworkOsNotifications 4}
+
+managementOptionSupportChanged NOTIFICATION-TYPE 
+OBJECTS { managementOptionSupportStatus, managementOptionSupportAddress}
+STATUS current
+DESCRIPTION
+"This notification indicates that a management option license has been changed."
+::= {prvtInterworkOsNotifications 5}
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-JDSU-MIB b/MIBS/telco-systems/binos/PRVT-JDSU-MIB
new file mode 100644
index 0000000..5109e74
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-JDSU-MIB
@@ -0,0 +1,266 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-JDSU-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-JDSU-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE
+        FROM SNMPv2-SMI                  -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                 -- [RFC2580]
+    RowStatus
+        FROM SNMPv2-TC                   -- [RFC2579]
+    MacAddress
+		FROM SNMPv2-TC                   -- [RFC2579]
+	ifIndex
+        FROM IF-MIB
+    VlanId 
+		FROM Q-BRIDGE-MIB                -- [RFC4363]
+    switch
+        FROM PRVT-SWITCH-MIB;
+
+prvtJdsuMib MODULE-IDENTITY
+LAST-UPDATED "201103150000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB provide control and analisys for JDSU functionality."
+
+-- revision history
+        REVISION       "201103150000Z"
+        DESCRIPTION
+        "Add JDSU Loopback traps."
+        REVISION       "201102080000Z"
+        DESCRIPTION
+        "Initial version."
+
+::= { switch 137 }
+
+-- ***********************************************
+-- ************ Top level structure of the MIB****
+-- ***********************************************
+ prvtJdsuNotifications              OBJECT IDENTIFIER ::= { prvtJdsuMib 0 }
+ prvtJdsuObjects                    OBJECT IDENTIFIER ::= { prvtJdsuMib 1 }
+ prvtJdsuConformance                OBJECT IDENTIFIER ::= { prvtJdsuMib 2 }
+
+prvtJdsuLoopback OBJECT IDENTIFIER ::= { prvtJdsuObjects 1 }
+
+-- ***********************************************
+-- *************** JSDU Loopback *****************
+-- ***********************************************
+
+prvtJdsuLoopbackTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtJdsuLoopbackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table holds the configuration for JDSU loopback"
+    ::= { prvtJdsuLoopback 1 }
+
+prvtJdsuLoopbackEntry OBJECT-TYPE
+        SYNTAX PrvtJdsuLoopbackEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+        "NONE"
+        INDEX { ifIndex }
+        ::= { prvtJdsuLoopbackTable 1 }
+
+PrvtJdsuLoopbackEntry ::= SEQUENCE {
+		prvtJdsuLoopbackAdminStatus                     INTEGER,
+        prvtJdsuLoopbackRemoteMac                       MacAddress,
+        prvtJdsuLoopbackRemoteInnerVlan                 VlanId,
+        prvtJdsuLoopbackRemoteOuterVlan                 VlanId,
+        prvtJdsuLoopbackOperationalStatus               INTEGER,
+        prvtJdsuLoopbackRowStatus                       RowStatus
+}
+
+prvtJdsuLoopbackAdminStatus OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                disable ( 1 ),
+                forced ( 2 ),
+                remote ( 3 )
+        }
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+        "JDSU remote loopback admin status.
+        This can be used to either enable or disable JDSU loopback on a
+        certain interface.
+        Forced parameter is used for manually set loopback.
+        Remote parameter is used for JDSU remote operation."
+        ::= { prvtJdsuLoopbackEntry 1 }
+
+prvtJdsuLoopbackRemoteMac OBJECT-TYPE
+		SYNTAX MacAddress
+		MAX-ACCESS read-write
+		STATUS current
+		DESCRIPTION
+		"Remote MAC address of the device for JDSU loopback testing."
+		::= { prvtJdsuLoopbackEntry 2 }
+		
+prvtJdsuLoopbackRemoteInnerVlan OBJECT-TYPE
+        SYNTAX VlanId
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "This is used as the VLAN tag in case of single encapsulated packets 
+        or as the inner VLAN tag in case of dual encapsulated packets."
+        ::= { prvtJdsuLoopbackEntry 3 }
+
+prvtJdsuLoopbackRemoteOuterVlan OBJECT-TYPE
+        SYNTAX VlanId
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "The outer VLAN tag in case of dual encapsulated packets."
+        ::= { prvtJdsuLoopbackEntry 4 }
+         
+prvtJdsuLoopbackOperationalStatus OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                down ( 1 ),
+                up ( 2 )
+        }
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "JDSU remote loopback current operational status."
+        ::= { prvtJdsuLoopbackEntry 5 }
+        
+prvtJdsuLoopbackRowStatus OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+        "The status of the row entry.
+         The writable columns in a row can not be changed if the row
+         is active. Certain columns must have a valid value before a row
+         can be activated."
+        ::= { prvtJdsuLoopbackEntry 6 }
+
+-- ***********************************************
+-- **************** Notification *****************
+-- ***********************************************
+
+prvtJdsuAdminStateChange NOTIFICATION-TYPE
+        OBJECTS {
+                prvtJdsuLoopbackAdminStatus
+        }
+        STATUS current
+        DESCRIPTION
+                "This trap should be sent whenever a JDSU admins state is changed
+                for a specific interface."
+        ::= { prvtJdsuNotifications 1 }
+
+prvtJdsuOperStateChange NOTIFICATION-TYPE
+        OBJECTS {
+                prvtJdsuLoopbackOperationalStatus
+        }
+        STATUS current
+        DESCRIPTION
+                "This trap should be sent whenever a JDSU state is changed
+                on a specific interface."
+        ::= { prvtJdsuNotifications 2 }
+		
+-- ******************************************************************
+-- PRVT-RING-EPS MIB Module - Conformance Information
+-- ******************************************************************
+
+prvtJdsuCompliances OBJECT IDENTIFIER ::= { prvtJdsuConformance 1 }
+prvtJdsuGroups      OBJECT IDENTIFIER ::= { prvtJdsuConformance 2 }
+
+-- ******************************************************************
+-- Units of conformance
+-- **********************
+prvtJdsuLoopbackGroup OBJECT-GROUP
+    OBJECTS {
+		prvtJdsuLoopbackAdminStatus,
+        prvtJdsuLoopbackRemoteMac,
+        prvtJdsuLoopbackRemoteInnerVlan,
+        prvtJdsuLoopbackRemoteOuterVlan,
+        prvtJdsuLoopbackOperationalStatus,
+        prvtJdsuLoopbackRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the JDSU loopback group."
+    ::= { prvtJdsuGroups 1 }
+	
+prvtJdsuLoopbackNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+      prvtJdsuAdminStateChange,
+      prvtJdsuOperStateChange
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Event Propagation notifications group."
+    ::= { prvtJdsuGroups 2 }    
+
+-- ******************************************************************
+-- MIB Module Compliance statements
+-- ******************************************************************
+
+prvtJdsuCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for support of the private JDSU MIB module."
+    MODULE
+        MANDATORY-GROUPS {
+            prvtJdsuLoopbackGroup,
+			prvtJdsuLoopbackNotificationsGroup
+            }
+
+    OBJECT prvtJdsuLoopbackRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    ::= { prvtJdsuCompliances 1 }
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-L2TUNNELING-MIB b/MIBS/telco-systems/binos/PRVT-L2TUNNELING-MIB
new file mode 100644
index 0000000..89385c3
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-L2TUNNELING-MIB
@@ -0,0 +1,492 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-L2TUNNELING-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-L2TUNNELING-MIB DEFINITIONS ::= BEGIN     
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,  
+Integer32, 
+Counter32
+FROM SNMPv2-SMI
+
+MODULE-COMPLIANCE,
+OBJECT-GROUP
+FROM SNMPv2-CONF       
+
+RowStatus
+FROM SNMPv2-TC
+
+sapBaseInfoEntry,  
+sdpInfoEntry,
+svcId,
+sapPortId, 
+sapEncapValue,  
+sdpId
+FROM  PRVT-SERV-MIB
+
+serviceAccessSwitch
+FROM PRVT-QOS-MIB;
+
+
+prvtL2TunnelingMIB MODULE-IDENTITY
+LAST-UPDATED "200910200000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+DESCRIPTION
+"This document is the SNMP MIB module to manage tunneling feature,
+ designed for service providers."
+
+-- 
+-- Revision History
+--
+REVISION "200910200000Z" 
+DESCRIPTION "Initial version."
+
+
+::= { serviceAccessSwitch 3 }
+
+
+-- --------------------------------------------------------------------
+-- PRVT-L2TUNNELING-MIB organisation
+-- --------------------------------------------------------------------       
+prvtL2TunnNotifications OBJECT IDENTIFIER   ::= { prvtL2TunnelingMIB 0 } 
+prvtL2TunnObjects OBJECT IDENTIFIER 		::= { prvtL2TunnelingMIB 1 } 
+prvtL2TunnConformance OBJECT IDENTIFIER 	::= { prvtL2TunnelingMIB 2 }
+  
+-- --------------------------------------------------------------------
+-- PRVT-L2TUNNELING-MIB Textual Conventions
+-- --------------------------------------------------------------------
+
+
+--------------------------------------------------------------
+--PRVT-L2TUNNELING objects
+--------------------------------------------------------------
+prvtL2TunnEnable  OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}   
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enable/Disable L2Tunneling feature"
+DEFVAL { disable }
+::=  { prvtL2TunnObjects 1 }
+  
+--  prvtL2TunnProfileTable
+prvtL2TunnProfileTable   OBJECT-TYPE    
+SYNTAX SEQUENCE OF PrvtL2TunnProfileEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A Table that contain all predefined and defined profiles."
+::= { prvtL2TunnObjects 2 } 
+
+prvtL2TunnProfileEntry OBJECT-TYPE    
+SYNTAX PrvtL2TunnProfileEntry   
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION      
+"An entry in this table contains a TLS tunneling profile"
+INDEX {prvtL2TunnProfileName }
+::= {prvtL2TunnProfileTable 1}
+
+PrvtL2TunnProfileEntry ::= SEQUENCE {
+prvtL2TunnProfileName OCTET STRING ,
+prvtL2TunnProfileRowStatus RowStatus
+}
+
+
+prvtL2TunnProfileName OBJECT-TYPE
+SYNTAX  OCTET STRING (SIZE(33))
+MAX-ACCESS read-create
+STATUS current   
+DESCRIPTION
+"TLS profile name. There will be three special profiles that will represent predefined policies:
+ - Discard-All, 
+ - Tunnel-BPDUs-only 
+ - Tunnel-All.  "
+::= {prvtL2TunnProfileEntry 1}    
+
+prvtL2TunnProfileRowStatus OBJECT-TYPE
+SYNTAX  RowStatus
+MAX-ACCESS read-create
+STATUS current   
+DESCRIPTION
+"TLS profile rowStatus. It is not possible to modify the predefined profiles."
+::= {prvtL2TunnProfileEntry 2}
+
+--prvtL2ProtocolsTable
+prvtL2ProtocolsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtL2ProtocolsEntry  
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A table that contain all predefine and custom defined L2Protocols"
+::= { prvtL2TunnObjects 3 }  
+ 
+prvtL2ProtocolsEntry OBJECT-TYPE
+SYNTAX   PrvtL2ProtocolsEntry    
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry is a L2 protocol with the  replacement multicast MAC addresses. "     
+INDEX{ prvtL2ProtocolName }
+::= {prvtL2ProtocolsTable 1} 
+
+PrvtL2ProtocolsEntry   ::= SEQUENCE{ 
+prvtL2ProtocolName OCTET STRING,   
+prvtL2ProtocolEthertype Integer32,
+prvtL2ProtocolMAC OCTET STRING,
+prvtL2ReplaceMAC OCTET STRING,
+prvtL2ProtocolRowStatus RowStatus
+
+}
+prvtL2ProtocolName OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (17))
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"L2 Protocol Name. There will the follow default protocol:
+ - xSTP
+ - LACP/LAMP
+ - Link OAM (802.3ah)
+ - Port Authentication (802.1x)
+ - E-LMI
+ - LLDP
+ - All other bridge block of protocols
+ - All Bridges
+ - GARP Block of Protocols
+ - Provider Bridge STP."
+::=  {prvtL2ProtocolsEntry 1}    
+
+prvtL2ProtocolEthertype OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Protocol Ethertype."      
+::= {prvtL2ProtocolsEntry 2}  
+
+prvtL2ProtocolMAC OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The protocol Multicast MAC address used for PDU distribution. "      
+::= {prvtL2ProtocolsEntry 3}      
+
+prvtL2ReplaceMAC OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Replacement multicast MAC addresses."
+::=  {prvtL2ProtocolsEntry 4}      
+
+prvtL2ProtocolRowStatus OBJECT-TYPE      
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"prvtL2CustomProtocols RowStatus used for CREATE/DELETE the custom protocols.
+ It is not possible to modify the predefined protocols."      	
+::= {prvtL2ProtocolsEntry 5} 
+
+
+        
+
+--prvtL2TunnProfMapProtoTable
+prvtL2TunnProfMapProtoTable   OBJECT-TYPE    
+SYNTAX SEQUENCE OF PrvtL2TunnProfMapProtoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A Table that contain actions configured for each L2 protcol per TLS tunneling profile."
+::= { prvtL2TunnObjects 4 }    
+
+prvtL2TunnProfMapProtoEntry   OBJECT-TYPE    
+SYNTAX PrvtL2TunnProfMapProtoEntry   
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION  
+"An entry in this table contain th action for specified profile and L2 protocol"
+INDEX {prvtL2TunnProfileName, prvtL2ProtocolName  }
+::= {prvtL2TunnProfMapProtoTable 1}   
+
+PrvtL2TunnProfMapProtoEntry ::= SEQUENCE{   
+prvtL2TunnAction INTEGER
+
+}
+prvtL2TunnAction OBJECT-TYPE   
+SYNTAX INTEGER{
+tunnel (1),
+discard (2)
+}        
+MAX-ACCESS read-write 
+STATUS current
+DESCRIPTION  
+"Define action discard/tunnel per TLS tunneled protocol "
+DEFVAL { discard }
+::= {prvtL2TunnProfMapProtoEntry 1}
+
+
+--prvtL2TunnSAPPointsTable   
+prvtL2TunnSAPPointsTable   OBJECT-TYPE    
+SYNTAX SEQUENCE OF PrvtL2TunnSAPPointsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A Table that contain an assigment of a profile to a SAP."
+::= { prvtL2TunnObjects 5 }    
+
+prvtL2TunnSAPPointsEntry  OBJECT-TYPE    
+SYNTAX    PrvtL2TunnSAPPointsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"An entry in this table contain information about the map between SAP and L2Tunneling profile."
+AUGMENTS  { sapBaseInfoEntry } 
+::= { prvtL2TunnSAPPointsTable 1 }   
+
+PrvtL2TunnSAPPointsEntry ::= SEQUENCE{  
+profileSAP OCTET STRING      
+}
+
+profileSAP   OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE(33))
+MAX-ACCESS read-write  
+STATUS current
+DESCRIPTION
+"Profile Id associated to a SAP point. 
+ Setting this object with an empty string will disable the profile."  
+::= {prvtL2TunnSAPPointsEntry 1}   
+
+--prvtL2TunnSDPPointsTable   
+prvtL2TunnSDPPointsTable   OBJECT-TYPE    
+SYNTAX SEQUENCE OF PrvtL2TunnSDPPointsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A Table that contain an assigment of a profile to a SDP."
+::= { prvtL2TunnObjects 6 }    
+
+prvtL2TunnSDPPointsEntry  OBJECT-TYPE    
+SYNTAX    PrvtL2TunnSDPPointsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"An entry in this table contain information about the map between SDP and L2Tunneling profile."
+AUGMENTS  { sdpInfoEntry } 
+::= { prvtL2TunnSDPPointsTable 1 }   
+
+PrvtL2TunnSDPPointsEntry ::= SEQUENCE{  
+profileSDP OCTET STRING    
+}
+
+profileSDP   OBJECT-TYPE
+SYNTAX  OCTET STRING (SIZE(33))
+MAX-ACCESS read-write  
+STATUS current
+DESCRIPTION
+"Profile Id associated to an SDP point.
+ Setting this object with an empty string will disable the profile."  
+::= {prvtL2TunnSDPPointsEntry 1}   
+
+
+
+prvtL2TunnClearStatistics  OBJECT-TYPE
+SYNTAX INTEGER {
+none(0),
+clear(1)
+}   
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Clear L2Tunneling statistics for each tunneling point"
+DEFVAL { none }
+::=  { prvtL2TunnObjects 7 }
+
+--prvtL2TunnSapStatisticsTable   
+prvtL2TunnSapStatisticsTable     OBJECT-TYPE    
+SYNTAX SEQUENCE OF PrvtL2TunnSapStatisticsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A Table that provide statistics  for each tunneling point per protocol."
+::= { prvtL2TunnObjects 8 }    
+
+prvtL2TunnSapStatisticsEntry  OBJECT-TYPE    
+SYNTAX    PrvtL2TunnSapStatisticsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"An entry in this table contain the number of SAP tunneling RX and TX packets ."
+INDEX  {svcId, sapPortId, sapEncapValue,   prvtL2ProtocolName}     
+::= { prvtL2TunnSapStatisticsTable 1 }   
+
+PrvtL2TunnSapStatisticsEntry ::= SEQUENCE{   
+l2TunnSapRxPackets Counter32,
+l2TunnSapTxPackets Counter32
+}     
+
+l2TunnSapRxPackets OBJECT-TYPE
+SYNTAX Counter32    
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of SAP Rx L2Tunneling packets"
+::= { prvtL2TunnSapStatisticsEntry 1}       
+
+l2TunnSapTxPackets OBJECT-TYPE
+SYNTAX Counter32    
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of SAP Tx L2Tunneling packets"
+::= { prvtL2TunnSapStatisticsEntry 2}          
+
+
+--prvtL2TunnSdpStatisticsTable   
+prvtL2TunnSdpStatisticsTable     OBJECT-TYPE    
+SYNTAX SEQUENCE OF PrvtL2TunnSdpStatisticsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A Table that provide statistics  for each tunneling point per protocol."
+::= { prvtL2TunnObjects 9 }    
+
+prvtL2TunnSdpStatisticsEntry  OBJECT-TYPE    
+SYNTAX    PrvtL2TunnSdpStatisticsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"An entry in this table contain the number of SDP tunneling RX and TX packets ."
+INDEX  {svcId, sdpId ,  prvtL2ProtocolName } 
+::= { prvtL2TunnSdpStatisticsTable 1 }   
+
+PrvtL2TunnSdpStatisticsEntry ::= SEQUENCE{   
+l2TunnSdpRxPackets Counter32,
+l2TunnSdpTxPackets Counter32
+}     
+
+l2TunnSdpRxPackets OBJECT-TYPE
+SYNTAX Counter32    
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of SDP Rx L2Tunneling packets"
+::= { prvtL2TunnSdpStatisticsEntry 1}       
+
+l2TunnSdpTxPackets OBJECT-TYPE
+SYNTAX Counter32    
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of SDP Tx L2Tunneling packets"
+::= { prvtL2TunnSdpStatisticsEntry 2}
+
+
+
+-- ----------------------------------------------------------------------------
+-- Conformance Information
+-- ----------------------------------------------------------------------------
+prvtL2TunnCompliances OBJECT IDENTIFIER ::= { prvtL2TunnConformance 1 }
+prvtL2TunnGroups OBJECT IDENTIFIER ::= { prvtL2TunnConformance 2 }
+
+-- compliance statements
+prvtL2TunnCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for L2Tunneling."
+MODULE -- this module
+MANDATORY-GROUPS {
+prvtL2TunnProtocolGroup,
+prvtL2TunnProfileGroup, 
+prvtL2TunnPointGroup
+}
+::= { prvtL2TunnCompliances 1 }     
+
+prvtL2TunnProtocolGroup OBJECT-GROUP
+OBJECTS {prvtL2ProtocolName, 
+prvtL2ReplaceMAC,
+prvtL2ProtocolEthertype,
+prvtL2ProtocolMAC,
+prvtL2ReplaceMAC,
+prvtL2ProtocolRowStatus
+}
+STATUS current
+DESCRIPTION
+"The group of objects regarding Layer 2 protocol  with a special MAC address ."
+::= { prvtL2TunnGroups 1 }    
+
+prvtL2TunnProfileGroup OBJECT-GROUP
+OBJECTS { prvtL2TunnEnable, 
+prvtL2TunnProfileName,
+prvtL2TunnProfileRowStatus
+}
+STATUS current
+DESCRIPTION
+"The group of objects used to configure a L2Tunneling profile ."
+::= { prvtL2TunnGroups 2 }       
+
+prvtL2TunnPointGroup OBJECT-GROUP
+OBJECTS {prvtL2TunnAction,
+profileSDP,  
+profileSAP,
+l2TunnSapRxPackets,
+l2TunnSapTxPackets, 
+l2TunnSdpRxPackets,
+l2TunnSdpTxPackets
+}
+STATUS current
+DESCRIPTION
+"The group of objects used L2Tunneling point ."
+::= { prvtL2TunnGroups 3 }
+
+
+
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-LLDP-MIB b/MIBS/telco-systems/binos/PRVT-LLDP-MIB
new file mode 100644
index 0000000..1de0a87
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-LLDP-MIB
@@ -0,0 +1,127 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-LLDP-MIB
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-LLDP-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-LLDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Integer32
+FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION,
+TruthValue,
+RowStatus
+FROM SNMPv2-TC
+
+switch FROM PRVT-SWITCH-MIB;
+    -------------------------------------------------------------------------------
+    --     PRIVATE BRANCH 
+    -------------------------------------------------------------------------------
+
+prvtLldpMIB MODULE-IDENTITY
+    LAST-UPDATED "200907280000Z"
+    ORGANIZATION "BATM Advanced Communication"
+    CONTACT-INFO 
+         "BATM/Telco Systems Support team
+            Email: 
+            For North America: techsupport@telco.com
+            For North Europe: support@batm.de, info@batm.de
+            For the rest of the world: techsupport@telco.com"
+    DESCRIPTION
+            "Management Information Base module for LLDP configuration"
+
+   -- revision history       
+    REVISION     "200907280000Z"
+    DESCRIPTION 
+    "Initial revision."
+   ::= { switch 145 }
+
+
+prvtLldpObjects              OBJECT IDENTIFIER ::= { prvtLldpMIB 0 }
+
+
+
+     prvtLldpEnable OBJECT-TYPE
+     SYNTAX TruthValue
+     MAX-ACCESS read-write
+     STATUS current
+     DESCRIPTION
+         "Enable/disable the LLDP on the device"
+     DEFVAL { false }
+     ::= { prvtLldpObjects 1 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-LMGR-MIB b/MIBS/telco-systems/binos/PRVT-LMGR-MIB
new file mode 100644
index 0000000..c21d1a4
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-LMGR-MIB
@@ -0,0 +1,632 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   PRVT-LMGR-MIB.mib
+-- ** Project:    T-Metro Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2006, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-LMGR-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, Unsigned32      FROM SNMPv2-SMI
+
+      OBJECT-GROUP, MODULE-COMPLIANCE                          FROM SNMPv2-CONF
+
+      TEXTUAL-CONVENTION, RowStatus, TruthValue                FROM SNMPv2-TC
+
+      InetAddressType, InetAddress, InetAddressIPv4            FROM INET-ADDRESS-MIB
+      mpls				 		FROM PRVT-CR-LDP-MIB;
+
+
+  prvtLmgr  MODULE-IDENTITY
+      LAST-UPDATED "200606110000Z" 
+      ORGANIZATION "BATM Advanced Communication"
+      CONTACT-INFO
+                   " BATM/Telco Systems Support team
+					Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+      DESCRIPTION  "The MIB module for management of the PRVT-LMGR
+                    product."
+
+-- revision history
+	REVISION       "200606110000Z"
+	DESCRIPTION
+	"Initial"
+  ::= { mpls 4 }
+
+  prvtLmgrObjects OBJECT IDENTIFIER ::= { prvtLmgr 1 } -- tables
+
+--  Textual Conventions.
+
+  PrvtLmgrAdminStatus ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The desired administrative state of a Label
+                   Manager entity."
+      SYNTAX      INTEGER {
+                      up(1),
+                      down(2)
+                  }
+
+  PrvtLmgrOperStatus ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The current operational state of a Label Manager
+                   entity. If the operational state is goingDown then
+                   a request to activate the Label Manager entity
+                   is rejected."
+      SYNTAX      INTEGER {
+                      up(1),          -- active
+                      down(2),        -- inactive
+                      goingUp(3),     -- activating
+                      goingDown(4),   -- deactivating
+                      actFailed(5)    -- activation failed
+                  }
+
+  PrvtLmgrPartnerStatus ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The state of a Label Manager partner entity."
+      SYNTAX      INTEGER {
+                      initial(0),     -- partner not active
+                      activating(1),  -- partner activating
+                      active(2),      -- partner active
+                      deactivating(3),-- partner deactivating
+                      failedOver(4),  -- partner failed, but recovering
+                      failed(5),      -- partner failed, but recovering
+                      unavailable(6)  -- partner unavailable
+                  }
+
+  PrvtLmgrIndex ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The index value identifying a Label Manager
+                   entity."
+      SYNTAX      Unsigned32
+
+  PrvtLmgrControlModes ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The Control Mode of Label Manager."
+      SYNTAX      INTEGER {
+                      ordered(1),     -- control is ordered
+                      independent(2)  -- control is independent
+                  }
+
+-- End of textual conventions
+
+   prvtLsrId  OBJECT-TYPE
+        SYNTAX      InetAddressIPv4
+        MAX-ACCESS  read-write
+        STATUS      current
+        DESCRIPTION
+         "This object allows LSR Id value to be set. It is needed for unique 
+          identification of LSR instance, from which the packets are sent
+          through created LDP session.
+          
+          Although every 32 bit value is valid, it is recommended
+          the device's loopback ip address to be used.
+
+          A value of zero indicates that no LSR ID has been
+          configured.  In this case, the signaling protocol stack
+          should construct a unique LSR ID from the other
+          information that is available to it (such as IP
+          addresses).  For example, PRVT-CR-LDP and PRVT-RSVP derive
+          the LSR ID by taking the 32 low bits of the following
+          _transport_address_ field, left padding with zeros if
+          necessary."
+       ::= { prvtLmgrObjects 1 }
+
+-- Label Manager entity table.
+-- This table is used to create and manage Label Manager entities.
+
+    prvtLmgrLsrEntityTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF PrvtLmgrLsrEntityEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Each entry represents an instance of the Label Manager.
+             Each instance is identified by LSR index."
+       ::= { prvtLmgrObjects 2 }
+
+    prvtLmgrLsrEntityEntry OBJECT-TYPE
+        SYNTAX      PrvtLmgrLsrEntityEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Each entry represents a Label Manager entity."
+        INDEX       {  prvtlmgrLsrEntityLsrIndex  }
+       ::= { prvtLmgrLsrEntityTable 1 }
+
+
+    PrvtLmgrLsrEntityEntry ::= SEQUENCE {
+            prvtlmgrLsrEntityLsrIndex           PrvtLmgrIndex,
+            prvtLmgrLsrEntityAdminStatus        PrvtLmgrAdminStatus,
+            prvtLmgrLsrEntityOperStatus         PrvtLmgrOperStatus,
+            prvtLmgrLsrEntityRowStatus          RowStatus,
+            prvtLmgrLsrEntityMinLsiBuffers      Unsigned32,
+            prvtLmgrLsrEntityMaxLsiBuffers      Unsigned32,
+            prvtLmgrLscStatus                   PrvtLmgrPartnerStatus,
+            prvtLmgrLdbCount                    Unsigned32,
+            prvtLmgrLsrEntityLsrId              Unsigned32,
+            prvtLmgrLsrEntityTranAddrType       InetAddressType,
+            prvtLmgrLsrEntityTranAddrLen        Unsigned32,
+            prvtLmgrLsrEntityTranAddr           InetAddress,
+            prvtLmgrLsrEntityControlMode        PrvtLmgrControlModes,
+            prvtLmgrLsrEntityMergeLsps          TruthValue,
+            prvtLmgrLsrEntityLoopDetection      TruthValue,
+            prvtLmgrLsrEntityPerformGrouping    TruthValue,
+            prvtLmgrLsrAutoStaticLsps           TruthValue,
+            prvtLmgrLsrDisplayPhpXCs            TruthValue,
+            prvtLmgrLsrEntityIpv6TranAddr       InetAddress
+       }
+
+    prvtlmgrLsrEntityLsrIndex OBJECT-TYPE
+        SYNTAX      PrvtLmgrIndex
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "LSR index for this prvtLmgrLsrEntityEntry. This is the
+             entity index passed in the Label Manager create
+             parameters."
+       ::= { prvtLmgrLsrEntityEntry 1 }
+
+    prvtLmgrLsrEntityAdminStatus   OBJECT-TYPE
+        SYNTAX      PrvtLmgrAdminStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Administrative status for Label Manager. When
+          prvtLmgrLsrEntityRowStatus is 'active' and
+          prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is
+          active and only these two fields and
+          prvtLmgrLsrEntityMinLsiBuffers can be modified."
+        DEFVAL { up }
+       ::= { prvtLmgrLsrEntityEntry 2 }
+
+    prvtLmgrLsrEntityOperStatus OBJECT-TYPE
+        SYNTAX      PrvtLmgrOperStatus
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+         "The current operational status of the Label Manager
+          entity."
+       ::= { prvtLmgrLsrEntityEntry 3 }
+
+    prvtLmgrLsrEntityRowStatus OBJECT-TYPE
+        SYNTAX      RowStatus
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Row status for the Label Manager table entry, used to
+          create and destroy table entries. When
+          prvtLmgrLsrEntityRowStatus is 'active' and
+          prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is
+          active and only these two fields and
+          prvtLmgrLsrEntityMinLsiBuffers can be modified."
+       ::= { prvtLmgrLsrEntityEntry 4 }
+
+    prvtLmgrLsrEntityMinLsiBuffers OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Minimum number of buffers to allocate for Label Switch
+          Interface requests.  This number includes any buffers sent
+          to the Label Switch Controller and awaiting a response."
+       ::= { prvtLmgrLsrEntityEntry 5 }
+
+    prvtLmgrLsrEntityMaxLsiBuffers OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Maximum number of buffers to allocate for Label Switch
+          Interface requests.  A value of 0 means no maximum,
+          otherwise this value must equal or exceed the minimum
+          buffer count."
+       ::= { prvtLmgrLsrEntityEntry 6 }
+
+    prvtLmgrLscStatus OBJECT-TYPE
+        SYNTAX      PrvtLmgrPartnerStatus
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+         "Diagnostic field providing information about the status
+	  of the Label Switch Controller as seen by Label Manager."
+       ::= { prvtLmgrLsrEntityEntry 7 }
+
+    prvtLmgrLdbCount  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+         "Diagnostic field providing information about the number
+         of active interfaces between Label Manager and the its
+         Label Database Interface users (PRVT-TEMIB and PRVT-RSVP)."
+       ::= { prvtLmgrLsrEntityEntry 8 }
+
+    prvtLmgrLsrEntityLsrId  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+         "An ID that uniquely identifies this LSR within the
+          network.
+
+          The LSR ID is typically derived from one of the LSR's IP
+          addresses.  It may be used for path vector based loop
+          detection if the signaling protocol in use implements
+          that.
+
+          A value of zero indicates that no LSR ID has been
+          configured.  In this case, the signaling protocol stack
+          should construct a unique LSR ID from the other
+          information that is available to it (such as IP
+          addresses).  For example, PRVT-CR-LDP and PRVT-RSVP derive
+          the LSR ID by taking the 32 low bits of the following
+          _transport_address_ field, left padding with zeros if
+          necessary.
+
+          The LSR ID is only used to identify this LSR on IPv4
+          networks.  See dcLmgrLsrEntityIpv6TranAddr for equivalent
+          function for use in IPv6 networks."
+       ::= { prvtLmgrLsrEntityEntry 9 }
+
+     prvtLmgrLsrEntityTranAddrType  OBJECT-TYPE
+        SYNTAX      InetAddressType
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "The type of the internetwork layer address used as the
+          transport address.  Currently this must be IPv4.  See
+          dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
+          field for use in IPv6 networks.
+
+          The transport address is used by LDP as the source
+          transport address for LDP Hello messages for the global
+          (per-platform) label space.
+
+          The transport address is used by RSVP as the source
+          address for messages originating on unnumbered interfaces.
+
+          This object indicates how the value of
+          mplsLdpEntityTransAddr is to be interpreted."
+       ::= { prvtLmgrLsrEntityEntry 10 }
+
+     prvtLmgrLsrEntityTranAddrLen  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "The length of the internetwork layer address used as the
+          transport address for LDP Hello messages in the global
+          label space and for messages originating on unnumbered
+          interfaces in RSVP.  Currently this must be an IPv4
+          address.
+
+          This object indicates how many elements of the
+          mplsLdpEntityTransAddr array are valid.  This value must
+          not exceed _LMGR_LSR_ADDR_LEN_."
+       ::= { prvtLmgrLsrEntityEntry 11 }
+
+     prvtLmgrLsrEntityTranAddr  OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "The value of the internetwork layer address used as the
+          transport address for LDP Hello messages in the global
+          label space and for messages originating on unnumbered
+          interfaces in RSVP.
+
+          This must be an IPv4 address.  See
+          dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
+          field for use in IPv6 networks.
+
+          If the transport address is not set, then _lsr_id_ must be
+          set to zero.  In this case, the transport address and LSR
+          ID are taken from an address on the Interface Information
+          Interface."
+       ::= { prvtLmgrLsrEntityEntry 12 }
+
+     prvtLmgrLsrEntityControlMode  OBJECT-TYPE
+        SYNTAX      PrvtLmgrControlModes
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "The LSP control mode that this LSR should adopt.
+          This field is only used by Label Manager in systems where
+          it supports LDP and/or CR-LDP."
+       ::= { prvtLmgrLsrEntityEntry 13 }
+
+     prvtLmgrLsrEntityMergeLsps  OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Whether this LSR should aim to merge LSPs, where permitted
+          by the underlying hardware.
+          This field is only used by Label Manager in systems where
+          it supports LDP and/or CR-LDP."
+        DEFVAL { false }
+       ::= { prvtLmgrLsrEntityEntry 14 }
+
+     prvtLmgrLsrEntityLoopDetection  OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Whether this LSR should perform loop detection.
+          This field is only used by Label Manager in systems where
+          it supports LDP and/or CR-LDP."
+        DEFVAL { false }
+       ::= { prvtLmgrLsrEntityEntry 15 }
+
+     prvtLmgrLsrEntityPerformGrouping  OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Whether Label Manager should perform LSP grouping on
+          behalf of the LDBI user.  This field is currently only
+          used for systems supporting RSVP."
+        DEFVAL { false }
+       ::= { prvtLmgrLsrEntityEntry 16 }
+
+     prvtLmgrLsrAutoStaticLsps  OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Whether Label Manager should automatically activate or
+          deactivate static LSPs when the interfaces on which they
+          depend become active or inactive."
+        DEFVAL { false }
+       ::= { prvtLmgrLsrEntityEntry 17 }
+
+     prvtLmgrLsrDisplayPhpXCs  OBJECT-TYPE
+        SYNTAX      TruthValue
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "Whether Label Manager should display the virtual cross
+          connects its sets up at the Egress node of Implicit Null
+          and Explicit Null LSPs in the mplsXcTable.  These cross
+          connects do not represent real switch programming, but do
+          show the prescence of such LSPs, and correspond to the
+          entries in the mplsTunnelTable for theses types of LSP."
+        DEFVAL { false }
+       ::= { prvtLmgrLsrEntityEntry 18 }
+
+     prvtLmgrLsrEntityIpv6TranAddr  OBJECT-TYPE
+        SYNTAX      InetAddress
+        MAX-ACCESS  read-create
+        STATUS      current
+        DESCRIPTION
+         "The value of the internetwork address used for messages
+          originating on unnumbered interfaces in RSVP in an IPv6
+          network.
+
+          This value also uniquely identifies this LSR within an
+          IPv6 network.
+
+          If this address is not set, the IPv6 transport address is
+          taken from an address on the Interface Information
+          Interface.
+
+          A length value of zero indicates that no IPv6 transport
+          address has been configured.  In this case, if IPv6
+          support is configured, the signaling protocol stack should
+          use an IPv6 address configured to the signaling stack over
+          the Interface Information Interface that is flagged as
+          suitable for use as a stable address."
+        ::= { prvtLmgrLsrEntityEntry 19 }
+
+-- End of Label Manager entity table.
+-- Label Manager LSP XC Table
+-- This table is used to create and manage LSP XCs
+
+    prvtLmgrLsrLspXcTable OBJECT-TYPE
+        SYNTAX      SEQUENCE OF PrvtLmgrLsrLspXcEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Each entry represents an instance of an LSP
+             cross-conect between a single in-segment and a
+             single out-segment."
+       ::= { prvtLmgrObjects 3 }
+
+    prvtLmgrLsrLspXcEntry OBJECT-TYPE
+        SYNTAX      PrvtLmgrLsrLspXcEntry
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Each entry represents an LSP cross connect."
+        INDEX       {  prvtlmgrLsrEntityLsrIndex,
+                       prvtLmgrLsrLspXcIndex,
+                       prvtLmgrLsrLspInSegLabel,
+                       prvtLmgrLsrLspOutSegIndex }
+
+       ::= { prvtLmgrLsrLspXcTable 1 }
+
+    PrvtLmgrLsrLspXcEntry ::= SEQUENCE {
+            prvtLmgrLsrLspXcIndex               Unsigned32,
+            prvtLmgrLsrLspInSegIndex            Unsigned32,
+            prvtLmgrLsrLspInSegIfIndex          Unsigned32,
+            prvtLmgrLsrLspInSegLabel            Unsigned32,
+            prvtLmgrLsrLspOutSegIndex           Unsigned32,
+            prvtLmgrLsrLspOutSegIfIndex         Unsigned32,
+            prvtLmgrLsrLspOutSegLabel           Unsigned32,
+            prvtLmgrLsrLspOutSegNextHopAddr     InetAddressIPv4
+         }
+
+    prvtLmgrLsrLspXcIndex  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "XC index for this prvtLmgrLsrLspXc.  This is the XC index
+             assigned by Label Manager for the LSP."
+       ::= { prvtLmgrLsrLspXcEntry 2 }
+
+    prvtLmgrLsrLspInSegIndex  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Index for the in segment.  This is the index assigned
+             by Label Manager for the in segment."
+       ::= { prvtLmgrLsrLspXcEntry 3 }
+
+    prvtLmgrLsrLspInSegIfIndex  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "If index for the in segment.  This is the If index
+             specified on setting up the in segment."
+       ::= { prvtLmgrLsrLspXcEntry 4 }
+
+    prvtLmgrLsrLspInSegLabel  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Top label for the in segment.  This is the Label assigned
+             by Label Manager Label Library for the in segment."
+       ::= { prvtLmgrLsrLspXcEntry 5 }
+
+
+    prvtLmgrLsrLspOutSegIndex  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  not-accessible
+        STATUS      current
+        DESCRIPTION
+            "Index for the out segment.  This is the index assigned
+             by Label Manager for the out segment."
+       ::= { prvtLmgrLsrLspXcEntry 6 }
+
+     prvtLmgrLsrLspOutSegIfIndex  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Interface Index for the out segment.  This is the
+             interface index specified when setting up the out segment."
+       ::= { prvtLmgrLsrLspXcEntry 7 }
+
+     prvtLmgrLsrLspOutSegLabel  OBJECT-TYPE
+        SYNTAX      Unsigned32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Top label for the out segment.  This is the label
+             specified by the remote LSR for the out segment."
+       ::= { prvtLmgrLsrLspXcEntry 8 }
+
+     prvtLmgrLsrLspOutSegNextHopAddr  OBJECT-TYPE
+        SYNTAX      InetAddressIPv4
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+            "Next hop address for the out segment.  This is the address
+             specified by the remote LSR for the out segment."
+       ::= { prvtLmgrLsrLspXcEntry 9 }
+
+-- Module compliance.
+
+-- Conformance Information.
+
+  prvtLmgrConformance   OBJECT IDENTIFIER ::= { prvtLmgr 2 }
+
+  prvtLmgrCompliances  OBJECT IDENTIFIER ::= { prvtLmgrConformance 1 }
+  prvtLmgrGroups       OBJECT IDENTIFIER ::= { prvtLmgrConformance 2 }
+
+  prvtLmgrCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The compliance statement for the PRVT-LMGR product."
+    MODULE
+
+    GROUP prvtLmgrEntityGroup
+    DESCRIPTION
+        "Objects for prvtLmgrEntTable."
+
+    GROUP prvtLmgrMiscGroup
+    DESCRIPTION
+        "Miscellaneous objects."
+
+    ::= { prvtLmgrCompliances 1 }
+
+-- Units of Conformance (Groups)
+
+prvtLmgrEntityGroup OBJECT-GROUP
+   OBJECTS {
+      prvtLmgrLsrEntityAdminStatus,
+      prvtLmgrLsrEntityOperStatus,
+      prvtLmgrLsrEntityRowStatus,
+      prvtLmgrLsrEntityMinLsiBuffers,
+      prvtLmgrLsrEntityMaxLsiBuffers,
+      prvtLmgrLsrEntityLsrId,
+      prvtLmgrLsrEntityTranAddrType,
+      prvtLmgrLsrEntityTranAddrLen,
+      prvtLmgrLsrEntityTranAddr,
+      prvtLmgrLsrEntityControlMode,
+      prvtLmgrLsrEntityMergeLsps,
+      prvtLmgrLsrEntityLoopDetection,
+      prvtLmgrLsrEntityPerformGrouping
+   }
+    STATUS  current
+    DESCRIPTION
+           "Label Manager Entity Objects."
+    ::= { prvtLmgrGroups 2 }
+
+prvtLmgrMiscGroup OBJECT-GROUP
+   OBJECTS {
+      prvtLmgrLscStatus,
+      prvtLmgrLdbCount,
+      prvtLmgrLsrAutoStaticLsps,
+      prvtLmgrLsrDisplayPhpXCs,
+      prvtLmgrLsrLspInSegIfIndex,
+      prvtLmgrLsrLspInSegLabel,
+      prvtLmgrLsrLspOutSegIfIndex,
+      prvtLmgrLsrLspOutSegLabel,
+      prvtLmgrLsrLspOutSegNextHopAddr,
+      prvtLmgrLsrEntityIpv6TranAddr
+   }
+    STATUS  current
+    DESCRIPTION
+           "Miscellaneous Non-Mandatory Objects."
+    ::= { prvtLmgrGroups 3 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-MONITOR-SESSION-MIB b/MIBS/telco-systems/binos/PRVT-MONITOR-SESSION-MIB
new file mode 100644
index 0000000..5880318
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-MONITOR-SESSION-MIB
@@ -0,0 +1,297 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-NETWORK-LOOPBACK-TEST-MIB
+-- ** Project: Network Loopback Tester 
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-MONITOR-SESSION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Integer32 
+FROM SNMPv2-SMI         
+
+    
+
+MODULE-COMPLIANCE,
+OBJECT-GROUP
+FROM SNMPv2-CONF
+
+
+                    -- [RFC2578]       
+
+DisplayString,
+TEXTUAL-CONVENTION
+FROM SNMPv2-TC
+
+PortList
+FROM Q-BRIDGE-MIB
+
+switch
+FROM PRVT-SWITCH-MIB;   
+
+-- The MONITOR SESSION MIB
+prvtMonitorSessionMib MODULE-IDENTITY
+
+LAST-UPDATED "201105230000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB contains manageable objects  for
+encapsulating Switched Port Analyzer(SPAN) feature."
+             
+REVISION "201105230000Z"
+DESCRIPTION
+"Initial version."  
+
+::= { switch 1000 }       
+
+
+-- -------------------------------------------------------------
+-- Textual Conventions
+-- -------------------------------------------------------------
+Direction ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+    "Monitor direction:
+     tx- Transmit
+     rx- Receive"
+    SYNTAX INTEGER 
+    {
+    	rx(1),
+    	tx(2)
+    }
+-- -------------------------------------------------------------
+-- groups in the PRVT-MONITOR-SESSION MIB
+-- -------------------------------------------------------------
+prvtMonitorSessionNotification  	OBJECT IDENTIFIER  		::= { prvtMonitorSessionMib 0 } 
+prvtMonitorSessionObjects      		OBJECT IDENTIFIER 		::= { prvtMonitorSessionMib 1 } 
+prvtMonitorSessionConformance       OBJECT IDENTIFIER 		::= { prvtMonitorSessionMib 2 }
+ 
+-- -------------------------------------------------------------
+-- prvtMonitorSessionObjects group
+-- -------------------------------------------------------------
+prvtMonitorSessionTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtMonitorSessionEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object for enable and configure Enable Switched Port Analyzer."
+::= { prvtMonitorSessionObjects	 1 }   
+
+prvtMonitorSessionEntry  OBJECT-TYPE  
+SYNTAX  PrvtMonitorSessionEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the table will describe all parameteres of Switched Port Analyzer per each direction Rx or Tx "
+INDEX { prvtMonitorSessionDirection } 
+::= {prvtMonitorSessionTable 1}
+
+PrvtMonitorSessionEntry ::=  SEQUENCE{  
+prvtMonitorSessionDirection   	Direction,
+prvtMonitorSessionSource 	  	PortList,
+prvtMonitorSessionDestination   Integer32
+}       
+
+prvtMonitorSessionDirection  OBJECT-TYPE
+SYNTAX  Direction  
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Direction recived/trasmitted of the monitored traffic."
+::= {prvtMonitorSessionEntry 1}     
+
+prvtMonitorSessionSource  OBJECT-TYPE
+SYNTAX  PortList  
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Monitored source list representing the ports to be mirrored."
+::= {prvtMonitorSessionEntry 2}  
+
+
+
+prvtMonitorSessionDestination  OBJECT-TYPE
+SYNTAX  Integer32   
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Analyzer port."
+::= {prvtMonitorSessionEntry 3} 
+
+prvtAnalyzerVLANTagTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtAnalyzerVLANTagEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object for enable and configure Remote Analyzer VLAN Tag"
+::= { prvtMonitorSessionObjects	 2 }   
+
+prvtAnalyzerVLANTagEntry  OBJECT-TYPE  
+SYNTAX  PrvtAnalyzerVLANTagEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the table will describe all parameteres of Remote Analyzer VLAN Tag per each direction Rx or Tx "
+INDEX { prvtMonitorSessionDirection } 
+::= {prvtAnalyzerVLANTagTable 1}    
+
+PrvtAnalyzerVLANTagEntry ::= SEQUENCE{
+prvtAnalyzerVLANTagEnable 	 INTEGER,
+prvtAnalyzerVLANTagVID   	 Integer32, 
+prvtAnalyzerVLANTagEtherType DisplayString,
+prvtAnalyzerVLANTagCFI    	 INTEGER,
+prvtAnalyzerVLANTagVPT	     INTEGER
+}               
+
+prvtAnalyzerVLANTagEnable OBJECT-TYPE
+SYNTAX  INTEGER
+{
+enable(1),
+disable(2)
+}  
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enable Remote Analyzer VLAN Tag."
+::= {prvtAnalyzerVLANTagEntry 1}             
+
+prvtAnalyzerVLANTagVID OBJECT-TYPE
+SYNTAX  Integer32 (1..4095)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The VLAN ID of the VLAN tag added to packet forwarded to Analyzer."
+::= {prvtAnalyzerVLANTagEntry 2}   
+
+
+prvtAnalyzerVLANTagEtherType OBJECT-TYPE
+SYNTAX  DisplayString
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The Vlan ether type of the VLAN tag added to packet forwarded to Analyzer."
+::= {prvtAnalyzerVLANTagEntry 3}
+                                                    
+                                                    
+prvtAnalyzerVLANTagCFI OBJECT-TYPE
+SYNTAX  INTEGER
+{
+clear(0),
+set(1)
+} 
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The CFI of the VLAN tag added to packet forwarded to Analyzer."
+::= {prvtAnalyzerVLANTagEntry 4}         
+
+prvtAnalyzerVLANTagVPT OBJECT-TYPE
+SYNTAX  INTEGER
+{
+vpt-value0(0), 
+vpt-value1(1), 
+vpt-value2(2), 
+vpt-value3(3), 
+vpt-value4(4), 
+vpt-value5(5), 
+vpt-value6(6), 
+vpt-value7(7), 
+undefined(8) 
+} 
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The VPT of the VLAN tag added to packet forwarded to Analyzer."
+::= {prvtAnalyzerVLANTagEntry 5}
+
+-- ----------------------------------------------------------------------------
+-- Notifications
+-- ----------------------------------------------------------------------------
+
+-- ----------------------------------------------------------------------------
+-- Conformance Information
+-- ----------------------------------------------------------------------------
+prvtMonitorSessionCompliances  OBJECT IDENTIFIER ::= {prvtMonitorSessionConformance 1}
+prvtMonitorSessionGroups OBJECT IDENTIFIER ::= {prvtMonitorSessionConformance 2}
+
+-- compliance statements   
+prvtMonitorSessionCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for Switched Port Analyzer."
+MODULE -- this module
+MANDATORY-GROUPS {
+prvtMonitorSessionMirroredGroup,
+prvtMonitorSessionAnalyzerGroup
+}      
+::= {prvtMonitorSessionCompliances 1}  
+
+prvtMonitorSessionMirroredGroup OBJECT-GROUP
+OBJECTS { 
+prvtMonitorSessionSource
+} STATUS current
+DESCRIPTION  
+"The group of objects dedicated to mirrored source."
+::= {prvtMonitorSessionGroups 1}  
+
+prvtMonitorSessionAnalyzerGroup OBJECT-GROUP
+OBJECTS { 
+prvtMonitorSessionDestination,  
+prvtAnalyzerVLANTagEnable
+} STATUS current
+DESCRIPTION  
+"The group of objects dedicated to analyzer."
+::= {prvtMonitorSessionGroups 2}
+
+END
+
+
+                                                    
+
+ 
+
+
+                        
+
diff --git a/MIBS/telco-systems/binos/PRVT-MPLS-IF-MIB b/MIBS/telco-systems/binos/PRVT-MPLS-IF-MIB
new file mode 100644
index 0000000..4db5654
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-MPLS-IF-MIB
@@ -0,0 +1,484 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   PRVT-MPLS-IF-MIB.mib
+-- ** Project:    T-Metro Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+PRVT-MPLS-IF-MIB DEFINITIONS ::= BEGIN
+
+
+  IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,Integer32, Unsigned32
+         FROM SNMPv2-SMI  
+    TEXTUAL-CONVENTION, RowStatus, TruthValue                FROM SNMPv2-TC       
+  ifIndex,ifEntry
+        FROM IF-MIB
+	InetAddress            FROM INET-ADDRESS-MIB
+ 	mpls				 		FROM PRVT-CR-LDP-MIB;
+   
+ 		
+  prvtMPLSIfMib MODULE-IDENTITY
+        LAST-UPDATED "200801010000Z"
+        ORGANIZATION "BATM Advanced Communication"
+        CONTACT-INFO
+        " BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+        DESCRIPTION
+        "This module includes configuration parameters for MPLS and RSVP interface specific parameters."
+
+        -- revision history
+         REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions." 
+        REVISION     "200701230000Z"
+     	 DESCRIPTION
+		"Changed ifaceRsvpHelloTolerance, ifaceRsvpHelloPersist to Unsigned32." 
+        REVISION     "200606270000Z"
+     	 DESCRIPTION
+		"Changes the ingress and egress label ranges." 
+		REVISION     "200601080000Z"
+     	 DESCRIPTION
+		"Added the global label space object and changed augmentation to ifTable."    
+        REVISION     "200511110000Z"
+     	 DESCRIPTION
+		"Initial version."             
+		
+        ::= { mpls 6 }
+
+
+   	-- --------------------------------------------------------------------
+	--      PRVT-MPLS-MIB organisation
+	-- --------------------------------------------------------------------
+
+	prvtMPLSIfaceObjs            OBJECT IDENTIFIER ::= { prvtMPLSIfMib 1}
+	prvtMPLSRouteObjs            OBJECT IDENTIFIER ::= { prvtMPLSIfMib 2}
+
+       
+    -- -----------------------------------------------------------------------------
+    -- Interface objects 
+    -- -----------------------------------------------------------------------------
+    prvtMplsIfaceTable 	OBJECT-TYPE
+        SYNTAX  SEQUENCE OF PrvtMplsIfaceEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+            "This table contains object for configuring MPLS and LDP interface specific parameters."
+		::= { prvtMPLSIfaceObjs 1 }
+
+    prvtMplsIfaceEntry 	OBJECT-TYPE
+		SYNTAX	PrvtMplsIfaceEntry		
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+		    "The MPLS/LDP configuration of an IP interface."
+        INDEX { ifIndex }
+     		::= { prvtMplsIfaceTable 1 }
+
+    PrvtMplsIfaceEntry ::= SEQUENCE {
+        ifaceMplsEnable       			TruthValue,
+        ifaceMplsPHPEnable       		TruthValue, 
+        ifaceMplsIngressLblRangeLow		Integer32,
+        ifaceMplsIngressLblRangeHigh	Integer32, 
+        ifaceMplsEgressLblRangeLow		Integer32,
+        ifaceMplsEgressLblRangeHigh		Integer32, 
+        ifaceMplsLdpHelloHoldTimer		Integer32, 
+        ifaceMplsLdpKeepaliveHoldTimer	Integer32,
+        ifaceMplsLdpUseGlobalLabelSpace	TruthValue
+    }
+
+    ifaceMplsEnable OBJECT-TYPE
+        SYNTAX  TruthValue
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "Enable or disable MPLS on this interface."
+		::= { prvtMplsIfaceEntry 1 }
+
+    ifaceMplsPHPEnable OBJECT-TYPE
+        SYNTAX  TruthValue
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "Enable or disable Penultimate Hop Popping on this interface."
+		::= { prvtMplsIfaceEntry 2 }
+
+    ifaceMplsIngressLblRangeLow OBJECT-TYPE
+        SYNTAX  Integer32 (32768..131071)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This is the lower border of the Ingress Lable Range for this interface."
+		::= { prvtMplsIfaceEntry 3 }
+  
+	 ifaceMplsIngressLblRangeHigh OBJECT-TYPE
+        SYNTAX  Integer32 (32768..131071)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This is the higher border of the Ingress Lable Range for this interface."
+		::= { prvtMplsIfaceEntry 4 } 
+		
+	ifaceMplsEgressLblRangeLow OBJECT-TYPE
+        SYNTAX  Integer32 (32768..131071)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This is the lower border of the Egress Lable Range for this interface."
+		::= { prvtMplsIfaceEntry 5 }
+  
+	 ifaceMplsEgressLblRangeHigh OBJECT-TYPE
+        SYNTAX  Integer32 (32768..131071)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This is the higher border of the Egress Lable Range for this interface."
+		::= { prvtMplsIfaceEntry 6 }
+          
+     ifaceMplsLdpHelloHoldTimer OBJECT-TYPE
+        SYNTAX  Integer32 (1..65535)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "LDP Hello Hold Time."
+		::= { prvtMplsIfaceEntry 7 }
+     
+	ifaceMplsLdpKeepaliveHoldTimer OBJECT-TYPE
+        SYNTAX  Integer32 (1..65535)
+		MAX-ACCESS	read-write
+		STATUS	current                                                
+		DESCRIPTION
+            "LDP Hello Keep-alive Time."
+		::= { prvtMplsIfaceEntry 8 }   
+		
+	ifaceMplsLdpUseGlobalLabelSpace OBJECT-TYPE
+        SYNTAX  TruthValue
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "Default value is true and correct value is true."
+		::= { prvtMplsIfaceEntry 9 }
+  
+
+		
+		
+	prvtRsvpIfaceTable 	OBJECT-TYPE
+        SYNTAX  SEQUENCE OF PrvtRsvpIfaceEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+            "This table contains object for configuring RSVP interface specific parameters."
+		::= { prvtMPLSIfaceObjs 2 }
+
+    prvtRsvpIfaceEntry 	OBJECT-TYPE
+		SYNTAX	PrvtRsvpIfaceEntry		
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+		    "The MPLS/LDP configuration of an IP interface."
+        AUGMENTS { ifEntry }
+     		::= { prvtRsvpIfaceTable 1 }
+
+    PrvtRsvpIfaceEntry ::= SEQUENCE {
+        ifaceRsvpRefreshInterval       	Integer32,
+        ifaceRsvpRefreshMultiple       	Integer32, 
+        ifaceRsvpSlewNumerator			Integer32,
+        ifaceRsvpSlewDenom				Integer32, 
+        ifaceRsvpBlockadeMultiple		Integer32, 
+        ifaceRsvpNotifyRRDecay			Integer32, 
+        ifaceRsvpNotifyRRInterval		Integer32, 
+        ifaceRsvpNotifyRRLimit			Integer32, 
+        ifaceRsvpHelloInterval			Integer32,  
+        ifaceRsvpHelloDecay				Integer32,  
+        ifaceRsvpHelloTolerance			Unsigned32, 
+        ifaceRsvpHelloPersist			Unsigned32, 
+        ifaceRsvpHelloTTL				Integer32
+
+    }
+        
+       ifaceRsvpRefreshInterval OBJECT-TYPE
+        SYNTAX  Integer32 
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The RSVP value, R,  which is used to set the average
+     		interval between refresh path and resv messages."
+		::= { prvtRsvpIfaceEntry 1 }
+  
+	 ifaceRsvpRefreshMultiple OBJECT-TYPE
+        SYNTAX  Integer32 
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The RSVP value, K, which is the number of unresponded Path
+     	or Resv refresh attempts which must be made, spaced by
+     	the refresh interval before the state is deemed to have
+     	timed out."
+		::= { prvtRsvpIfaceEntry 2} 
+		
+	ifaceRsvpSlewNumerator OBJECT-TYPE
+        SYNTAX  Integer32 (1..214783647)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The numerator of the fraction, SlewMax, which is the maximum
+     		allowable increase in the refresh interval, R, to prevent
+     		state timeout while changing R.  R is increased by this
+     		fraction until it reaches the new desired value."
+		::= { prvtRsvpIfaceEntry 3 }
+  
+	 ifaceRsvpSlewDenom OBJECT-TYPE
+        SYNTAX  Integer32 (1..214783647)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The denominator of the fraction, SlewMax, which is the
+     	maximum allowable increase in the refresh interval, R, to
+     	prevent state timeout while changing R.  R is increased by
+     	this fraction until it reaches the new desired value."
+		::= { prvtRsvpIfaceEntry 4 }     
+		
+	ifaceRsvpBlockadeMultiple OBJECT-TYPE
+        SYNTAX  Integer32 (1..214783647)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The RSVP value, Kb, which is the number of refresh timeout
+     		periods after which blockade state is deleted."
+		::= { prvtRsvpIfaceEntry 5 }
+  
+	 ifaceRsvpNotifyRRDecay OBJECT-TYPE
+        SYNTAX  Integer32    (0..100)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The percentage increase in the rapid retransmission
+     		interval for each consecutive unacknowledged RSVP Notify
+    		 message.  A value of 0 indicates a constant retransmission
+     		rate."
+		::= { prvtRsvpIfaceEntry 6} 
+		
+	ifaceRsvpNotifyRRInterval OBJECT-TYPE
+        SYNTAX  Integer32 (1..214783647)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The interval in milliseconds before a Notify message is
+     		first resent if no acknowledgement is received."
+		::= { prvtRsvpIfaceEntry 7 }
+  
+	 ifaceRsvpNotifyRRLimit OBJECT-TYPE
+        SYNTAX  Integer32 (1..214783647)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The maximum number of times a Notify message is resent if
+     		no acknowledgement is received."
+		::= { prvtRsvpIfaceEntry 8 }
+
+     
+     
+     ifaceRsvpHelloInterval OBJECT-TYPE
+        SYNTAX  Integer32 
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The interval between sending consecutive Hello messages."
+		::= { prvtRsvpIfaceEntry 9 }
+  
+	 ifaceRsvpHelloDecay OBJECT-TYPE
+        SYNTAX  Integer32    (0..100)
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "Percentage increase of hello interval after each Hello message
+ 			sent when the hello session with the neighbor has timed out."
+		::= { prvtRsvpIfaceEntry 10} 
+		
+	ifaceRsvpHelloTolerance OBJECT-TYPE
+        SYNTAX  Unsigned32 
+        MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The number of hello periods which may pass without receiving a successful 
+            Hello message from a partner before the Hello session times out."
+		::= { prvtRsvpIfaceEntry 11 }
+  
+	 ifaceRsvpHelloPersist OBJECT-TYPE
+        SYNTAX  Unsigned32 		
+        MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The number of hello periods which may pass after the Hello session times out before Hello messages cease."
+		::= { prvtRsvpIfaceEntry 12 }
+
+     ifaceRsvpHelloTTL OBJECT-TYPE
+        SYNTAX  Integer32 (1..255) 		
+        MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "The Time To Live that will be set in the IP header of all Hello packets sent to the neighbor associated with this interface."
+		::= { prvtRsvpIfaceEntry 13 }
+   
+prvtMplsRouteProtocolTable 	OBJECT-TYPE
+        SYNTAX  SEQUENCE OF PrvtMplsRouteProtocolEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+            "This table contains for configuring the egress and ingress routes for LDP label
+            packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel and 
+            connected."
+		::= { prvtMPLSRouteObjs 1 }
+
+prvtMplsRouteProtocolEntry 	OBJECT-TYPE
+		SYNTAX	PrvtMplsRouteProtocolEntry		
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+		    "An entry in the table represents the configuration of a particular route type for ingress
+		    or egress." 
+		INDEX { prvtMplsRouteDirection, prvtMplsRouteType } 
+        ::= { prvtMplsRouteProtocolTable 1 }
+       
+PrvtMplsRouteProtocolEntry ::= SEQUENCE {
+        prvtMplsRouteDirection       	INTEGER,
+        prvtMplsRouteType     		  	INTEGER, 
+        prvtMplsRouteRowStatus			RowStatus
+      }
+
+ 	prvtMplsRouteDirection OBJECT-TYPE
+        SYNTAX  INTEGER {
+         		ingress(1),
+         		egress(2)
+        }
+		MAX-ACCESS	read-only    
+		STATUS	current                                                                                               
+		DESCRIPTION
+            "The direction of the route that will be used to receive or send LDP packets."
+		::= { prvtMplsRouteProtocolEntry 1 }
+  
+	 prvtMplsRouteType OBJECT-TYPE
+        SYNTAX  INTEGER {
+                 bgp(1),
+  				 connected(2),
+  				 isis(3),
+  				 kernel(4),
+  				 ospf(5),
+  				 rip(6),
+  				 static(7)   
+        }
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+        "The type of the route which will be used to send or receive LDP packets."
+		::= { prvtMplsRouteProtocolEntry 2} 
+		
+	prvtMplsRouteRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+            "This object is used to create an entry in the table. Only createAndGo(4) should be 
+            used."
+		::= { prvtMplsRouteProtocolEntry 3 }
+  
+prvtMplsRouteAddressTable 	OBJECT-TYPE
+        SYNTAX  SEQUENCE OF PrvtMplsRouteAddressEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+            "This table contains for configuring the egress and ingress routes for LDP label
+            packets. It supports all CLI route types - bgp, isis, ospf, rip, static, kernel and 
+            connected."
+		::= { prvtMPLSRouteObjs 2 }
+
+prvtMplsRouteAddressEntry 	OBJECT-TYPE
+		SYNTAX	PrvtMplsRouteAddressEntry		
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+		    "An entry in the table represents the configuration of a particular route type for ingress
+		    or egress." 
+		INDEX { prvtMplsAddressDirection, prvtMplsAddressIPAddr, prvtMplsAddressMask  } 
+        ::= { prvtMplsRouteAddressTable 1 }
+       
+PrvtMplsRouteAddressEntry ::= SEQUENCE {
+        prvtMplsAddressDirection       	INTEGER,
+        prvtMplsAddressIPAddr     		InetAddress, 
+        prvtMplsAddressMask    		  	Integer32, 
+        prvtMplsAddressRowStatus		RowStatus
+      }
+
+ 	prvtMplsAddressDirection OBJECT-TYPE
+        SYNTAX  INTEGER {
+         		ingress(1),
+         		egress(2)
+        }
+		MAX-ACCESS	read-only    
+		STATUS	current                                                                                               
+		DESCRIPTION
+            "The direction of the route that will be used to receive or send LDP packets."
+		::= { prvtMplsRouteAddressEntry 1 }
+  
+	 prvtMplsAddressIPAddr OBJECT-TYPE
+        SYNTAX  InetAddress 
+        MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+        "The IP address of the route that will be used to send or receive LDP packets."
+		::= { prvtMplsRouteAddressEntry 2}
+		
+	prvtMplsAddressMask OBJECT-TYPE
+        SYNTAX  Integer32(0..32)
+        MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+        "The mask for the IP address of the route that will be used to send or receive LDP packets."
+		::= { prvtMplsRouteAddressEntry 3}  
+		
+	prvtMplsAddressRowStatus OBJECT-TYPE
+        SYNTAX  RowStatus
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+            "This object is used to create an entry in the table. Only createAndGo(4) should be 
+            used."
+		::= { prvtMplsRouteAddressEntry 4 }
+ 
+END
diff --git a/MIBS/telco-systems/binos/PRVT-MPLS-LDP-MIB b/MIBS/telco-systems/binos/PRVT-MPLS-LDP-MIB
new file mode 100644
index 0000000..3d411fe
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-MPLS-LDP-MIB
@@ -0,0 +1,4142 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   PRVT-MPLS-LDP-MIB.mib
+-- ** Project:    T-Metro Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2006, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-MPLS-LDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE,
+    Integer32, Counter32, Unsigned32
+        FROM SNMPv2-SMI                                -- [RFC2578]
+
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                              --  [RFC2580]
+
+    TEXTUAL-CONVENTION, RowStatus, TimeInterval, TruthValue,
+    TimeStamp, StorageType
+        FROM SNMPv2-TC                                --  [RFC2579]
+
+    InetAddressPrefixLength,
+    InetAddressType,
+    InetAddress,
+    InetPortNumber
+        FROM INET-ADDRESS-MIB                         --  [RFC3291]
+
+--    IndexInteger
+--        FROM DIFFSERV-MIB                             [RFC3289]
+
+    mplsStdMIB,
+    MplsLabelDistributionMethod,
+    MplsLdpIdentifier,
+    MplsLdpLabelType,
+    MplsLspType,
+    MplsLsrIdentifier,
+    MplsRetentionMode,
+    MplsAtmVcIdentifier
+        FROM MPLS-TC-PRIV-STDEXT-MIB                          --  [RFC3811]
+
+    InterfaceIndexOrZero
+        FROM IF-MIB                                   --  [RFC2020]
+
+--    AtmVpIdentifier
+--        FROM ATM-TC-MIB                                 [RFC2514]
+
+    MplsIndexType
+        FROM MPLS-LSR-MIB                         --  [RFC3813]
+
+--    DLCI
+--        FROM FRAME-RELAY-DTE-MIB                      [RFC2115]
+     
+    prvtcrldpPmIndex, prvtcrldpSigIndex, mpls
+        FROM PRVT-CR-LDP-MIB
+     ;
+ 
+mplsLdpStdMIB MODULE-IDENTITY
+     LAST-UPDATED "200902170000Z" 
+      ORGANIZATION "BATM Advanced Communication"
+      CONTACT-INFO
+                   " BATM/Telco Systems Support team
+					Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+    DESCRIPTION
+        "This MIB contains managed object definitions for the
+        'Multiprotocol Label Switching, Label Distribution
+        Protocol, LDP'."
+    REVISION "200902170000Z"
+    DESCRIPTION
+       "Removed references to undefined OBJECT-GROUPs."
+    REVISION "200606030000Z"  -- June 3, 2004
+    DESCRIPTION
+       "Initial version published as part of RFC 3815."
+
+
+    ::= { mpls 1 } 
+
+--****************************************************************
+-- MPLS LDP Textual Conventions
+--****************************************************************
+--
+
+MplsLabel ::= TEXTUAL-CONVENTION
+    STATUS        current
+    DESCRIPTION
+        "This value represents an MPLS label.
+        The label contents are specific to
+        the label being represented.
+
+        The label carried in an MPLS shim header
+        (for LDP, the Generic Label) is a 20-bit number
+        represented by 4 octets. Bits 0-19 contain a
+        label or a reserved label value.  Bits 20-31 MUST
+        be zero.
+
+        The frame relay label can be either 10-bits or
+        23-bits depending on the DLCI field size and the
+        upper 22-bits or upper 9-bits must be zero, respectively.
+
+        For an ATM label the lower 16-bits represents the VCI,
+        the next 12-bits represents the VPI and the remaining
+        bits MUST be zero."
+   SYNTAX       Integer32(0..2147483647)
+
+
+MplsLdpLabelTypes ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The Layer 2 label types which are defined for
+        MPLS LDP are generic(1), atm(2), or frameRelay(3)."
+    SYNTAX              INTEGER {
+                           generic(1),
+                           atm(2),
+                           frameRelay(3)
+                        }
+
+--****************************************************************
+
+mplsLdpObjects       OBJECT IDENTIFIER ::= { mplsLdpStdMIB 1 }
+mplsLdpNotifications OBJECT IDENTIFIER ::= { mplsLdpStdMIB 2 0}
+mplsLdpConformance   OBJECT IDENTIFIER ::= { mplsLdpStdMIB 3 }
+
+
+--****************************************************************
+-- MPLS LDP Objects
+--****************************************************************
+
+mplsLdpLsrObjects    OBJECT IDENTIFIER ::= { mplsLdpObjects 1 }
+
+mplsLdpEntityObjects OBJECT IDENTIFIER ::= { mplsLdpObjects 2 }
+
+--
+-- The MPLS Label Distribution Protocol's
+-- Label Switching Router Objects
+--
+
+mplsLdpLsrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpLsrEntry
+    MAX-ACCESS  not-accessible
+        STATUS  current
+        DESCRIPTION
+        "This table contains information about the Label Switching
+        Router (LSR) or Label Edge Router (LER) that is running the
+        MPLS Label Distribution Protocol."
+     ::= { mplsLdpLsrObjects 1 }
+
+mplsLdpLsrEntry OBJECT-TYPE
+    SYNTAX      MplsLdpLsrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table contains the LSR objects specific to
+         an instance of PRVT-CR-LDP."
+    INDEX       { prvtcrldpPmIndex}
+    ::= { mplsLdpLsrTable 1 }
+
+MplsLdpLsrEntry ::= SEQUENCE {
+    mplsLdpLsrId                       MplsLsrIdentifier,
+    mplsLdpLsrLoopDetectionCapable     INTEGER
+}
+
+mplsLdpLsrId OBJECT-TYPE
+    SYNTAX      MplsLsrIdentifier
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Label Switching Router's Identifier."
+    ::= { mplsLdpLsrEntry 1 }
+
+mplsLdpLsrLoopDetectionCapable OBJECT-TYPE
+    SYNTAX      INTEGER {
+                           none(1),
+                           other(2),
+                           hopCount(3),
+                           pathVector(4),
+                           hopCountAndPathVector(5)
+                        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A indication of whether this
+        Label Switching Router supports
+        loop detection.
+
+        none(1) -- Loop Detection is not supported
+                   on this LSR.
+
+        other(2) -- Loop Detection is supported but
+                    by a method other than those
+                    listed below.
+
+        hopCount(3) -- Loop Detection is supported by
+                       Hop Count only.
+
+        pathVector(4) -- Loop Detection is supported by
+                         Path Vector only.
+
+        hopCountAndPathVector(5) -- Loop Detection is
+                             supported by both Hop Count
+                             And Path Vector.
+
+        Since Loop Detection is determined during
+        Session Initialization, an individual session
+        may not be running with loop detection.  This
+        object simply gives an indication of whether or not the
+        LSR has the ability to support Loop Detection and
+        which types."
+
+    ::= { mplsLdpLsrEntry 2 }
+
+--
+-- The MPLS Label Distribution Protocol Entity Objects
+--
+
+mplsLdpEntityTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains information about the
+        MPLS Label Distribution Protocol Entities which
+        exist on this Label Switching Router (LSR)
+        or Label Edge Router (LER)."
+    ::= { mplsLdpEntityObjects 1 }
+
+mplsLdpEntityEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents an LDP entity.
+        An entry can be created by a network administrator
+        or by an SNMP agent as instructed by LDP."
+    INDEX       { prvtcrldpSigIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex }
+    ::= { mplsLdpEntityTable 1 }
+
+MplsLdpEntityEntry ::= SEQUENCE {
+    mplsLdpEntityLdpId                       MplsLdpIdentifier,
+    mplsLdpEntityIndex                       Unsigned32  ,
+    mplsLdpEntityProtocolVersion             Integer32,
+    mplsLdpEntityAdminStatus                 INTEGER,
+    mplsLdpEntityOperStatus                  INTEGER,
+    mplsLdpEntityWellKnownTcpDiscoveryPort   InetPortNumber,
+    mplsLdpEntityWellKnownUdpDiscoveryPort   InetPortNumber,
+    mplsLdpEntityMaxPduLength                Unsigned32,
+    mplsLdpEntityKeepAliveHoldTimer          Unsigned32,
+    mplsLdpEntityHelloHoldTimer              Unsigned32,
+    mplsLdpEntityInitSessionThreshold  Integer32,
+     mplsLdpEntityLabelDistMethod      MplsLabelDistributionMethod,
+     mplsLdpEntityLabelRetentionMode   MplsRetentionMode,
+    mplsLdpEntityPathVectorLimit             Integer32,
+    mplsLdpEntityHopCountLimit               Integer32,
+     mplsLdpEntityTransportAddrKind    INTEGER,
+    mplsLdpEntityTargetPeer                TruthValue,
+     mplsLdpEntityTargetPeerAddrType   InetAddressType,
+    mplsLdpEntityTargetPeerAddr            InetAddress,
+     mplsLdpEntityLabelType            MplsLdpLabelType,
+    mplsLdpEntityDiscontinuityTime           TimeStamp,
+    mplsLdpEntityStorageType                 StorageType,
+    mplsLdpEntityRowStatus                   RowStatus,
+    mplsLdpEntityWildcardEntity              TruthValue
+}
+
+mplsLdpEntityLdpId OBJECT-TYPE
+    SYNTAX      MplsLdpIdentifier
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+         "The LDP identifier.  The first four octets encode an IP
+         address assigned to the LSR, and the last two octets
+         identify a specific label space within the LSR."
+    REFERENCE
+        "RFC3036, LDP Specification, Section on LDP Identifiers."
+    ::= { mplsLdpEntityEntry 1 }
+
+mplsLdpEntityIndex OBJECT-TYPE
+    SYNTAX      Unsigned32   	
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This index is used as a secondary index to uniquely
+        identify this row.  Before creating a row in this table,
+        the 'mplsLdpEntityIndexNext' object should be retrieved.
+        That value should be used for the value of this index
+        when creating a row in this table.  NOTE:  if a value
+        of zero (0) is retrieved, that indicates that no rows
+        can be created in this table at this time.
+
+        A secondary index (this object) is meaningful to some
+        but not all, LDP implementations.  For example
+        an LDP implementation which uses PPP would
+        use this index to differentiate PPP sub-links.
+
+        Another way to use this index is to give this the
+        value of ifIndex.  However, this is dependant
+        on the implementation.
+
+        This field is deprecated in the following tables provided
+        by PRVT-CR-LDP Session Controller.
+
+        - mplsLdpEntityTable.
+        - mplsLdpPeerTable.
+
+        In these tables the value of the Entity Index will always
+        be filled in to be 1."
+    ::= { mplsLdpEntityEntry 2 }
+
+mplsLdpEntityProtocolVersion OBJECT-TYPE
+    SYNTAX      Integer32(1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+       "The version number of the protocol.  The value of 0 on a
+       read indicates that the version of the protocol is unknown.
+       Otherwise, the value of this object represents the version
+       of the LDP protocol.
+
+       Section 3.5.3 in the LDP Specification specifies
+       that the version of the LDP protocol is negotiated during
+       session establishment. The value of this object
+       represents the value that is sent in the initialization
+       message."
+     REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.3 Initialization
+       Message."
+    DEFVAL { 1 }
+    ::= { mplsLdpEntityEntry 3 }
+
+mplsLdpEntityAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  enable(1),
+                  disable(2)
+                }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The administrative status of this LDP Entity.
+        If this object is changed from 'enable' to 'disable'
+        and this entity has already attempted to establish
+        contact with a Peer (which implies that the
+        'mplsLdpEntityRowStatus' object has been set to
+        'active'), then all contact with that
+        Peer is lost and all information from that Peer
+        needs to be removed from the MIB. (This implies
+        that the network management subsystem should clean
+        up any related entry in the mplsLdpPeerTable.  This
+        further implies that a 'tear-down' for that session
+        is issued and the session and all information related
+        to that session cease to exist).
+
+        At this point the user is able to change values
+        which are related to this entity.
+
+        When the admin status is set back to 'enable', then
+        this Entity will attempt to establish a new session
+        with the Peer."
+    DEFVAL  { enable }
+    ::= { mplsLdpEntityEntry 4 }
+
+mplsLdpEntityOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER {
+                  unknown(1),
+                  enabled(2),
+                  disabled(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The operational status of this LDP Entity.
+
+        The value of unknown(1) indicates that the
+        operational status cannot be determined at
+        this time.  The value of unknown should be
+        a transient condition before changing
+        to enabled(2) or disabled(3)."
+    ::= { mplsLdpEntityEntry 5 }
+
+mplsLdpEntityWellKnownTcpDiscoveryPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The TCP Port for
+        LDP.  The default value is the well-known
+        value of this port."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 3.10, Well-known
+         Numbers, and Section 3.10.1.  UDP and TCP Ports."
+    DEFVAL { 646 }
+    ::= { mplsLdpEntityEntry 6 }
+
+mplsLdpEntityWellKnownUdpDiscoveryPort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The UDP Discovery Port for
+        LDP.  The default value is the
+        well-known value for this port."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 2.4.1,
+        Basic Discovery Mechanism, Section 2.4.2,
+        Extended Discovery Mechanism, Section
+        3.10, Well-known Numbers, and Section 3.10.1.
+        UDP and TCP Ports."
+    DEFVAL { 646 }
+    ::= { mplsLdpEntityEntry 7 }
+
+mplsLdpEntityMaxPduLength OBJECT-TYPE
+    SYNTAX      Unsigned32 (256..65535)
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "The maximum PDU Length that is sent in
+       the Common Session Parameters of an Initialization
+       Message.  According to the LDP Specification [RFC3036]
+       a value of 255 or less specifies the
+       default maximum length of 4096 octets, this is why
+       the value of this object starts at 256.
+
+       The receiving LSR MUST calculate the maximum PDU
+       length for the session by using the smaller of its and
+       its peer's proposals for Max PDU Length."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.3.
+       Initialization Message."
+    DEFVAL { 4096 }
+    ::= { mplsLdpEntityEntry 8 }
+
+mplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The 16-bit integer value which is the proposed keep
+        alive hold timer for this LDP Entity."
+    DEFVAL { 40 }
+    ::= { mplsLdpEntityEntry 9 }
+
+mplsLdpEntityHelloHoldTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The 16-bit integer value which is the proposed Hello
+        hold timer for this LDP Entity. The Hello Hold time
+        in seconds.
+
+        An LSR maintains a record of Hellos received
+        from potential peers.  This object represents
+        the Hold Time in the Common Hello Parameters TLV of
+        the Hello Message.
+
+        A value of 0 is a default value and should be
+        interpretted in conjunction with the
+        mplsLdpEntityTargetPeer object.
+
+        If the value of this object is 0: if the value of the
+        mplsLdpEntityTargetPeer object is false(2), then this
+        specifies that the Hold Time's actual default value is
+        15 seconds (i.e., the default Hold time for Link Hellos
+        is 15 seconds).  Otherwise if the value of the
+        mplsLdpEntityTargetPeer object is true(1), then this
+        specifies that the Hold Time's actual default value is
+        45 seconds (i.e., the default Hold time for Targeted
+        Hellos is 45 seconds).
+
+        A value of 65535 means infinite (i.e., wait forever).
+
+        All other values represent the amount of time in
+        seconds to wait for a Hello Message.  Setting the
+        hold time to a value smaller than 15 is not
+        recommended, although not forbidden according
+        to RFC3036.
+
+        For auto-created entities that use the global label space
+        (and therefore might correspond to more than one
+        adjacency over more than one interface), this value will
+        only be meaningful if all interfaces that correspond to
+        this entity are configured to use the same hello hold
+        time, since this property can be configured on a per
+        interface basis.
+
+        If the interfaces have differing configurations, the
+        value returned on a MIB Get will be 0."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.2.,
+        Hello Message."
+    DEFVAL { 0 }
+    ::= { mplsLdpEntityEntry 10 }
+
+mplsLdpEntityInitSessionThreshold OBJECT-TYPE
+    SYNTAX      Integer32(0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "When attempting to establish a session with
+        a given Peer, the given LDP Entity should
+        send out the SNMP notification,
+        'mplsLdpInitSessionThresholdExceeded', when
+        the number of Session Initialization messages
+        sent exceeds this threshold.
+
+        The notification is used to notify an
+        operator when this Entity and its Peer are
+        possibly engaged in an endless sequence
+        of messages as each NAKs the other's
+
+        Initialization messages with Error Notification
+        messages.  Setting this threshold which triggers
+        the notification is one way to notify the
+        operator.  The notification should be generated
+        each time this threshold is exceeded and
+        for every subsequent Initialization message
+        which is NAK'd with an Error Notification
+        message after this threshold is exceeded.
+
+        A value of 0 (zero) for this object
+        indicates that the threshold is infinity, thus
+        the SNMP notification will never be generated."
+    REFERENCE
+        "RFC3036, LDP Specification,
+        Section 2.5.3 Session Initialization."
+    DEFVAL { 8 }
+    ::= { mplsLdpEntityEntry 11 }
+
+mplsLdpEntityLabelDistMethod OBJECT-TYPE
+    SYNTAX      MplsLabelDistributionMethod
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "For any given LDP session, the method of
+        label distribution must be specified."
+    ::= { mplsLdpEntityEntry 12 }
+
+mplsLdpEntityLabelRetentionMode OBJECT-TYPE
+    SYNTAX      MplsRetentionMode
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The LDP Entity can be configured to use either
+        conservative or liberal label retention mode.
+
+        If the value of this object is conservative(1)
+        then advertized label mappings are retained
+        only if they will be used to forward packets,
+        i.e., if label came from a valid next hop.
+
+        If the value of this object is liberal(2)
+        then all advertized label mappings are retained
+        whether they are from a valid next hop or not."
+    ::= { mplsLdpEntityEntry 13 }
+
+mplsLdpEntityPathVectorLimit OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 0 (zero) then
+        Loop Detection for Path Vectors is disabled.
+
+        Otherwise, if this object has a value greater than
+        zero, then Loop Dection for Path Vectors is enabled,
+        and the Path Vector Limit is this value.
+        Also, the value of the object,
+        'mplsLdpLsrLoopDetectionCapable', must be set to
+        either 'pathVector(4)' or 'hopCountAndPathVector(5)',
+        if this object has a value greater than 0 (zero),
+        otherwise it is ignored."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 2.8 Loop Dection,
+       Section 3.4.5 Path Vector TLV."
+    ::= { mplsLdpEntityEntry 14 }
+
+mplsLdpEntityHopCountLimit OBJECT-TYPE
+    SYNTAX       Integer32 (0..255)
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "If the value of this object is 0 (zero),
+        then Loop Detection using Hop Counters is
+        disabled.
+
+        If the value of this object is greater than
+        0 (zero) then Loop Detection using Hop
+        Counters is enabled, and this object
+        specifies this Entity's maximum allowable
+        value for the Hop Count.
+        Also, the value of the object
+        mplsLdpLsrLoopDetectionCapable must be set
+        to either 'hopCount(3)' or
+        'hopCountAndPathVector(5)' if this object
+        has a value greater than 0 (zero), otherwise
+        it is ignored."
+    DEFVAL { 0 }
+    ::= { mplsLdpEntityEntry 15 }
+
+mplsLdpEntityTransportAddrKind OBJECT-TYPE
+    SYNTAX     INTEGER {
+                          interface(1),
+                          loopback(2)
+                       }
+    MAX-ACCESS read-create
+    STATUS     current
+    DESCRIPTION
+        "This specifies whether the loopback or interface
+        address is to be used as the transport address
+        in the transport address TLV of the
+        hello message.
+
+        If the value is interface(1), then the IP
+        address of the interface from which hello
+        messages are sent is used as the transport
+        address in the hello message.
+
+        Otherwise, if the value is loopback(2), then the IP
+        address of the loopback interface is used as the
+        transport address in the hello message."
+    DEFVAL { loopback }
+    ::= { mplsLdpEntityEntry 16 }
+
+mplsLdpEntityTargetPeer OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "If this LDP entity uses targeted peer then set
+        this to true."
+    DEFVAL { false }
+    ::= { mplsLdpEntityEntry 17 }
+
+mplsLdpEntityTargetPeerAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The type of the internetwork layer address used for
+        the Extended Discovery.  This object indicates how
+        the value of mplsLdpEntityTargetPeerAddr is to
+        be interpreted."
+    ::= { mplsLdpEntityEntry 18 }
+
+mplsLdpEntityTargetPeerAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "The value of the internetwork layer address
+        used for the Extended Discovery.  The value of
+        mplsLdpEntityTargetPeerAddrType specifies how
+        this address is to be interpreted."
+   ::= { mplsLdpEntityEntry 19 }
+
+mplsLdpEntityLabelType OBJECT-TYPE
+    SYNTAX      MplsLdpLabelType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies the optional parameters for the LDP
+        Initialization Message.
+
+        If the value is generic(1) then no
+        optional parameters will be sent in
+        the LDP Initialization message associated
+        with this Entity.
+
+        If the value is atmParameters(2) then
+        a row must be created in the
+        mplsLdpEntityAtmTable, which
+        corresponds to this entry.
+
+        If the value is frameRelayParameters(3) then
+        a row must be created in the
+        mplsLdpEntityFrameRelayTable, which
+        corresponds to this entry."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3.,
+        Initialization Message."
+    ::= { mplsLdpEntityEntry 20 }
+
+mplsLdpEntityDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion
+        at which any one or more of this entity's counters
+        suffered a discontinuity.  The relevant counters
+        are the specific instances associated with this
+        entity of any Counter32 object contained
+        in the 'mplsLdpEntityStatsTable'.  If no such
+        discontinuities have occurred since the last
+        re-initialization of the local management
+        subsystem, then this object contains a zero
+        value."
+    ::= { mplsLdpEntityEntry 21 }
+
+mplsLdpEntityStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityEntry 22 }
+
+mplsLdpEntityRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "An object that allows entries in this table to
+         be created and deleted using the
+         RowStatus convention.
+
+         Once the 'mplsLdpEntityAdminStatus' object has
+         the value of 'up' and this object has the value
+         of 'active' then the Entity will atttempt to
+         contact an LDP Peer.  If the value of this object
+         is changed to 'notInService', then the Entity looses
+         contact with the LDP Peer and all information related
+         to that Peer must be removed from the MIB.  This has
+         the same effect as changing 'mplsLdpEntityAdminStatus'
+         from 'enable' to 'disable'.
+
+         When this object is set to 'active' and the value of
+         the 'mplsLdpEntityAdminStatus' is 'enable' then
+         this Entity will attempt to contact the Peer and
+         establish new sessions."
+    ::= { mplsLdpEntityEntry 25 }
+
+mplsLdpEntityWildcardEntity OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Specifies whether the LDP Entity is to be used for
+         accepting 'unsolicited' Hello messages that include the R
+         bit.
+
+         The value of this object is ignored unless
+         mplsLdpEntityTargetedPeer is set to true
+         mplsLdpEntityTargetedPeerAddr is set to 0."
+    DEFVAL { false }
+    ::= { mplsLdpEntityEntry 24 }
+
+--
+-- The MPLS LDP Entity Statistics Table
+--
+
+mplsLdpEntityStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table is a read-only table which augments
+        the mplsLdpEntityTable.  The purpose of this
+        table is to keep statistical information about
+        the LDP Entities on the LSR."
+    ::= { mplsLdpEntityObjects 4 }
+
+mplsLdpEntityStatsEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A row in this table contains statistical information
+        about an LDP Entity.  Some counters contained in a
+        row are for fatal errors received during a former
+        LDP Session associated with this entry.  For example,
+        an LDP PDU received on a TCP connection during an
+        LDP Session contains a fatal error.  That
+        error is counted here, because the
+        session is terminated.
+
+        If the error is NOT fatal (i.e., the Session
+        remains), then the error is counted in the
+        mplsLdpSessionStatsEntry."
+    AUGMENTS       {   mplsLdpEntityEntry  }
+    ::= { mplsLdpEntityStatsTable 1 }
+
+MplsLdpEntityStatsEntry ::= SEQUENCE {
+    mplsLdpEntityStatsSessionAttempts               Counter32,
+    mplsLdpEntityStatsSessionRejectedNoHelloErrors  Counter32,
+    mplsLdpEntityStatsSessionRejectedAdErrors       Counter32,
+    mplsLdpEntityStatsSessionRejectedMaxPduErrors   Counter32,
+    mplsLdpEntityStatsSessionRejectedLRErrors       Counter32,
+    mplsLdpEntityStatsBadLdpIdentifierErrors        Counter32,
+    mplsLdpEntityStatsBadPduLengthErrors            Counter32,
+    mplsLdpEntityStatsBadMessageLengthErrors        Counter32,
+    mplsLdpEntityStatsBadTlvLengthErrors            Counter32,
+    mplsLdpEntityStatsMalformedTlvValueErrors       Counter32,
+    mplsLdpEntityStatsKeepAliveTimerExpErrors       Counter32,
+    mplsLdpEntityStatsShutdownReceivedNotifications Counter32,
+    mplsLdpEntityStatsShutdownSentNotifications     Counter32
+}
+
+mplsLdpEntityStatsSessionAttempts OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Initialization messages
+        which were sent or received by this LDP Entity and
+        were NAK'd.   In other words, this counter counts
+        the number of session initializations that failed.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 1 }
+
+mplsLdpEntityStatsSessionRejectedNoHelloErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Rejected/No Hello Error
+        Notification Messages sent or received by
+        this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 2 }
+
+mplsLdpEntityStatsSessionRejectedAdErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Rejected/Parameters
+        Advertisement Mode Error Notification Messages sent
+        or received by this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 3 }
+
+mplsLdpEntityStatsSessionRejectedMaxPduErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Rejected/Parameters
+
+        Max Pdu Length Error Notification Messages sent
+        or received by this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 4 }
+
+mplsLdpEntityStatsSessionRejectedLRErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "A count of the Session Rejected/Parameters
+        Label Range Notification Messages sent
+        or received by this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 5 }
+
+mplsLdpEntityStatsBadLdpIdentifierErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Bad LDP Identifier
+        Fatal Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 6 }
+
+mplsLdpEntityStatsBadPduLengthErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Bad PDU Length
+        Fatal Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 7 }
+
+mplsLdpEntityStatsBadMessageLengthErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Bad Message
+        Length Fatal Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 8 }
+
+mplsLdpEntityStatsBadTlvLengthErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Bad TLV
+        Length Fatal Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 9 }
+
+mplsLdpEntityStatsMalformedTlvValueErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Malformed TLV
+        Value Fatal Errors detected by the session(s)
+        (past and present) associated with this
+        LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 10 }
+
+mplsLdpEntityStatsKeepAliveTimerExpErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Session Keep Alive
+        Timer Expired Errors detected by the session(s)
+        (past and present) associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.1.2."
+    ::= { mplsLdpEntityStatsEntry 11 }
+
+mplsLdpEntityStatsShutdownReceivedNotifications OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Shutdown Notifications
+        received related to session(s) (past and present)
+        associated with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 12 }
+
+mplsLdpEntityStatsShutdownSentNotifications OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Shutdown Notfications
+        sent related to session(s) (past and present) associated
+        with this LDP Entity.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpEntityDiscontinuityTime."
+    ::= { mplsLdpEntityStatsEntry 13 }
+
+--
+-- The MPLS LDP Peer Table
+--
+
+mplsLdpSessionObjects OBJECT IDENTIFIER ::= { mplsLdpObjects 3 }
+
+mplsLdpPeerLastChange OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime at the time of the most
+        recent addition or deletion to/from the
+        mplsLdpPeerTable/mplsLdpSessionTable."
+    ::= { mplsLdpSessionObjects 1 }
+
+mplsLdpPeerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpPeerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about LDP peers known by Entities in
+        the mplsLdpEntityTable.  The information in this table
+        is based on information from the Entity-Peer interaction
+        during session initialization but is not appropriate
+        for the mplsLdpSessionTable, because objects in this
+        table may or may not be used in session establishment."
+    ::= { mplsLdpSessionObjects 2 }
+
+mplsLdpPeerEntry OBJECT-TYPE
+    SYNTAX      MplsLdpPeerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Information about a single Peer which is related
+        to a Session.  NOTE:  this table is used to
+        augment the mplsLdpSessionTable."
+    INDEX       { prvtcrldpPmIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId }
+    ::= { mplsLdpPeerTable 1 }
+
+MplsLdpPeerEntry ::= SEQUENCE {
+    mplsLdpPeerLdpId                      MplsLdpIdentifier,
+    mplsLdpPeerLabelDistMethod      MplsLabelDistributionMethod,
+    mplsLdpPeerPathVectorLimit            Integer32,
+    mplsLdpPeerTransportAddrType    InetAddressType,
+    mplsLdpPeerTransportAddr        InetAddress
+}
+
+mplsLdpPeerLdpId OBJECT-TYPE
+    SYNTAX      MplsLdpIdentifier
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The LDP identifier of this LDP Peer."
+    ::= { mplsLdpPeerEntry 1 }
+
+mplsLdpPeerLabelDistMethod OBJECT-TYPE
+    SYNTAX      MplsLabelDistributionMethod
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "For any given LDP session, the method of
+        label distribution must be specified."
+    ::= { mplsLdpPeerEntry 2 }
+
+mplsLdpPeerPathVectorLimit OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 0 (zero) then
+        Loop Dection for Path Vectors for this Peer
+        is disabled.
+
+        Otherwise, if this object has a value greater than
+        zero, then Loop Dection for Path  Vectors for this
+        Peer is enabled and the Path Vector Limit is this value."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 2.8 Loop Dection,
+       Section 3.4.5 Path Vector TLV."
+    ::= { mplsLdpPeerEntry 3 }
+
+mplsLdpPeerTransportAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of the Internet address for the
+        mplsLdpPeerTransportAddr object.  The LDP
+        specification describes this as being either
+        an IPv4 Transport Address or IPv6 Transport
+        Address which is used in opening the LDP session's
+        TCP connection, or if the optional TLV is not
+        present, then this is the IPv4/IPv6 source
+        address for the UPD packet carrying the Hellos.
+
+        This object specifies how the value of the
+        mplsLdpPeerTransportAddr object should be
+        interpreted."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 2.5.2
+       Transport Connection Establishment and
+       Section 3.5.2.1 Hello Message Procedures."
+    ::= { mplsLdpPeerEntry 4 }
+
+mplsLdpPeerTransportAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Internet address advertised by the peer
+        in the Hello Message or the Hello source address.
+
+        The type of this address is specified by the
+        value of the mplsLdpPeerTransportAddrType
+        object."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 2.5.2
+       Transport Connection Establishment and
+       Section 3.5.2.1 Hello Message Procedures."
+    ::= { mplsLdpPeerEntry 5 }
+
+--
+-- The MPLS LDP Sessions Table
+--
+
+mplsLdpSessionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Sessions between the LDP Entities
+        and LDP Peers.  Each row in this table
+        represents a single session."
+    ::= { mplsLdpSessionObjects 3 }
+
+mplsLdpSessionEntry OBJECT-TYPE
+    SYNTAX      MplsLdpSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information on a
+        single session between an LDP Entity and LDP Peer.
+        The information contained in a row is read-only.
+
+        Please note:  the Path Vector Limit for the
+        Session is the value which is configured in
+        the corresponding mplsLdpEntityEntry. The
+        Peer's Path Vector Limit is in the
+        mplsLdpPeerPathVectorLimit object in the
+        mplsLdpPeerTable.
+
+        Values which may differ from those configured are
+        noted in the objects of this table, the
+        mplsLdpAtmSessionTable and the
+        mplsLdpFrameRelaySessionTable. A value will
+        differ if it was negotiated between the
+        Entity and the Peer. Values may or may not
+        be negotiated. For example, if the values
+        are the same then no negotiation takes place.
+        If they are negotiated, then they may differ."
+    INDEX       { prvtcrldpSigIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId }
+    ::= { mplsLdpSessionTable 1 }
+
+MplsLdpSessionEntry ::= SEQUENCE {
+    mplsLdpSessionStateLastChange       TimeStamp,
+    mplsLdpSessionState                          INTEGER,
+    mplsLdpSessionRole                  INTEGER,
+    mplsLdpSessionProtocolVersion                Integer32,
+    mplsLdpSessionKeepAliveHoldTimeRemaining     TimeInterval,
+    mplsLdpSessionKeepAliveTime         Unsigned32,
+    mplsLdpSessionMaxPduLength                   Unsigned32,
+    mplsLdpSessionDiscontinuityTime              TimeStamp,
+    mplsLdpSessionConfiguredHoldTime             Unsigned32,
+    mplsLdpSessionPeerHoldTime                   Unsigned32,
+    mplsLdpSessionHoldTimeInUse                  Unsigned32
+}
+
+mplsLdpSessionStateLastChange OBJECT-TYPE
+    SYNTAX TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime at the time this
+        Session entered its current state as
+        denoted by the mplsLdpSessionState
+        object."
+    ::= { mplsLdpSessionEntry 1 }
+
+mplsLdpSessionState OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   nonexistent(1),
+                   initialized(2),
+                   openrec(3),
+                   opensent(4),
+                   operational(5)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The current state of the session, all of the
+        states 1 - 5 are based on the state machine
+        for session negotiation behavior."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 2.5.4,
+        Initialization State Machine."
+    ::= { mplsLdpSessionEntry 2 }
+
+mplsLdpSessionRole OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   unknown(1),
+                   active(2),
+                   passive(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "During session establishment the LSR/LER takes either
+        the active role or the passive role based on address
+        comparisons.  This object indicates whether this LSR/LER
+        was behaving in an active role or passive role during
+        this session's establishment.
+
+        The value of unknown(1), indicates that the role is not
+        able to be determined at the present time."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 2.5.3.,
+        Session Initialization"
+    ::= { mplsLdpSessionEntry 3 }
+
+mplsLdpSessionProtocolVersion OBJECT-TYPE
+    SYNTAX      Integer32(1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The version of the LDP Protocol which
+        this session is using.  This is the version of
+        the LDP protocol which has been negotiated
+        during session initialization."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.3,
+       Initialization Message."
+    ::= { mplsLdpSessionEntry 4 }
+
+mplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE
+    SYNTAX      TimeInterval
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The keep alive hold time remaining for this session in
+        units of hundredths of a second.  This interval will
+        change when the 'next' Keep Alive message which
+        corresponds to this session is received.  A value of zero
+        indicates that the keep alive hold timer is not running."
+    ::= { mplsLdpSessionEntry 5 }
+
+   mplsLdpSessionKeepAliveTime OBJECT-TYPE
+       SYNTAX      Unsigned32 (1..65535)
+       UNITS       "seconds"
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+           "The negotiated KeepAlive Time which
+           represents the amount of seconds between
+           keep alive messages.  The
+           mplsLdpEntityKeepAliveHoldTimer
+           related to this Session is the
+           value that was proposed as the
+           KeepAlive Time for this session.
+
+           This value is negotiated during
+           session initialization between
+           the entity's proposed value
+           (i.e., the value configured in
+           mplsLdpEntityKeepAliveHoldTimer)
+           and the peer's proposed
+           KeepAlive Hold Timer value.
+           This value is the smaller
+           of the two proposed values."
+       REFERENCE
+          "RFC3036, LDP Specification, Section 3.5.3,
+          Initialization Message."
+       ::= { mplsLdpSessionEntry 6 }
+
+mplsLdpSessionMaxPduLength OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+       UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of maximum allowable length for LDP PDUs for
+           this session.  This value may have been negotiated
+           during the Session Initialization.  This object is
+           related to the mplsLdpEntityMaxPduLength object.  The
+           mplsLdpEntityMaxPduLength object specifies the requested
+           LDP PDU length, and this object reflects the negotiated
+           LDP PDU length between the Entity and
+           the Peer."
+       REFERENCE
+          "RFC3036, LDP Specification, Section 3.5.3,
+          Initialization Message."
+       ::= { mplsLdpSessionEntry 7 }
+
+mplsLdpSessionDiscontinuityTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of sysUpTime on the most recent occasion at
+        which any one or more of this session's counters
+        suffered a discontinuity.  The relevant counters are
+        the specific instances associated with this session
+        of any Counter32 or Counter64 object contained in the
+        mplsLdpSessionStatsTable.  If no such discontinuities have
+        occurred since the last re-initialization of the local
+        management subsystem, then this object contains a zero
+        value.
+
+        The initial value of this object is the value of
+        sysUpTime when the entry was created in this table.
+
+        Also, a NMS(command generator) can distinguish when a session
+        between a given Entity and Peer goes away and then a new
+        session is established.  This value would change and
+        thus indicate to the NMS(command generator) that this is a
+        different session."
+    ::= { mplsLdpSessionEntry 8 }
+
+mplsLdpSessionConfiguredHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The locally configured keepalive hold time for this
+        session, in seconds.  Note that the value of this field
+        reflects configuration at the time of session
+        initialization; this may differ from the configuration
+        that would apply to a new session, if configuration has
+        changed since this session was initialized."
+    ::= { mplsLdpSessionEntry 13 }
+
+mplsLdpSessionPeerHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The peer's advertised keepalive hold time for this session
+        in seconds.  Note that the value of this field reflects
+        the peer's configuration at the time of session
+        initialization; this may differ from the configuration
+        that would apply to a new session, if the peer's
+        configuration has changed since this session was
+        initialized."
+    ::= { mplsLdpSessionEntry 14 }
+
+mplsLdpSessionHoldTimeInUse OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The keepalive hold time that is currently in use for this
+        session, in seconds."
+    ::= { mplsLdpSessionEntry 15 }
+
+--
+-- The MPLS LDP Session Statistics Table
+--
+
+mplsLdpSessionStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpSessionStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of statistics for Sessions between
+        LDP Entities and LDP Peers.  The table is read
+        only.  Counters are only incremented when the U
+        bit is not set."
+    ::= { mplsLdpSessionObjects 4 }
+
+mplsLdpSessionStatsEntry OBJECT-TYPE
+    SYNTAX      MplsLdpSessionStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents statistical
+        information on a single session between an LDP
+        Entity and LDP Peer.  Errors are only counted
+        if the U bit is not set in the message or TLV."
+    INDEX       { prvtcrldpSigIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId }
+    ::= { mplsLdpSessionStatsTable 1 }
+
+MplsLdpSessionStatsEntry ::= SEQUENCE {
+    mplsLdpSessionStatsUnknownMesTypeErrors  Counter32,
+    mplsLdpSessionStatsUnknownTlvErrors      Counter32
+}
+
+mplsLdpSessionStatsUnknownMesTypeErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object counts the number of Unknown Message Type
+        Errors detected by this LSR/LER during this session.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpSessionDiscontinuityTime."
+    ::= { mplsLdpSessionStatsEntry 1 }
+
+mplsLdpSessionStatsUnknownTlvErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+        "This object counts the number of Unknown TLV Errors
+        detected by this LSR/LER during this session.
+
+        Discontinuities in the value of this counter can occur
+        at re-initialization of the management system, and at
+        other times as indicated by the value of
+        mplsLdpSessionDiscontinuityTime."
+    ::= { mplsLdpSessionStatsEntry 2 }
+
+--
+-- The MPLS LDP Hello Adjacency Table
+--
+
+mplsLdpHelloAdjacencyObjects OBJECT IDENTIFIER ::=
+                              { mplsLdpSessionObjects 5 }
+
+mplsLdpHelloAdjacencyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpHelloAdjacencyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Hello Adjacencies for Sessions."
+    ::= { mplsLdpHelloAdjacencyObjects 1 }
+
+mplsLdpHelloAdjacencyEntry OBJECT-TYPE
+    SYNTAX      MplsLdpHelloAdjacencyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each row represents a single LDP Hello Adjacency.
+        An LDP Session can have one or more Hello adjacencies."
+         INDEX       { prvtcrldpSigIndex,
+                       mplsLdpEntityLdpId,
+                       mplsLdpEntityIndex,
+                       mplsLdpPeerLdpId,
+                       mplsLdpHelloAdjacencyIndex }
+    ::= { mplsLdpHelloAdjacencyTable 1 }
+
+MplsLdpHelloAdjacencyEntry ::= SEQUENCE {
+    mplsLdpHelloAdjacencyIndex                  Unsigned32,
+    mplsLdpHelloAdjacencyHoldTimeRemaining      TimeInterval,
+    mplsLdpHelloAdjacencyHoldTime               Unsigned32,
+    mplsLdpHelloAdjacencyType                   INTEGER,
+    mplsLdpHelloAdjacencyConfiguredHoldTime     Unsigned32,
+    mplsLdpHelloAdjacencyPeerHoldTime           Unsigned32
+}
+
+mplsLdpHelloAdjacencyIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An identifier for this specific adjacency."
+    ::= { mplsLdpHelloAdjacencyEntry 1 }
+
+mplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE
+    SYNTAX      TimeInterval
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 65535,
+        this means that the hold time is infinite
+        (i.e., wait forever).
+
+        Otherwise, the time remaining for
+        this Hello Adjacency to receive its
+        next Hello Message.
+
+        This interval will change when the 'next'
+        Hello Message which corresponds to this
+        Hello Adjacency is received unless it
+        is infinite."
+    ::= { mplsLdpHelloAdjacencyEntry 2 }
+
+mplsLdpHelloAdjacencyHoldTime OBJECT-TYPE
+    SYNTAX Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Hello hold time which is negotiated between
+        the Entity and the Peer.  The entity associated
+        with this Hello Adjacency issues a proposed
+        Hello Hold Time value in the
+        mplsLdpEntityHelloHoldTimer object.  The peer
+        also proposes a value and this object represents
+        the negotiated value.
+
+        A value of 0 means the default,
+        which is 15 seconds for Link Hellos
+        and 45 seconds for Targeted Hellos.
+        A value of 65535 indicates an
+        infinite hold time."
+    REFERENCE
+       "RFC3036, LDP Specification, Section 3.5.2 Hello Message"
+    ::= { mplsLdpHelloAdjacencyEntry 3 }
+
+mplsLdpHelloAdjacencyType OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   link(1),
+                   targeted(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This adjacency is the result of a 'link'
+        hello if the value of this object is link(1).
+        Otherwise, it is a result of a 'targeted'
+        hello, targeted(2)."
+    ::= { mplsLdpHelloAdjacencyEntry 4 }
+
+mplsLdpHelloAdjacencyConfiguredHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The locally configured hello hold time for this adjacency,
+        in seconds."
+    ::= { mplsLdpHelloAdjacencyEntry 5 }
+
+mplsLdpHelloAdjacencyPeerHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The peer's advertised hello hold time for this adjacency,
+        in seconds."
+    ::= { mplsLdpHelloAdjacencyEntry 6 }
+
+--
+--  Session Label (LSP) Mapping to LSR MIB's
+--  In Segment LIB Information.
+--
+--
+-- NOTE: the next 2 tables map to the
+-- MPLS-LSR-MIB's MplsInSegmentTable
+-- and MplsOutSegmentTable.  The
+-- cross-connect (XC) information is not
+-- represented here as it can be gleaned
+-- from the MPLS-LSR-MIB.
+--
+
+mplsInSegmentLdpLspTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsInSegmentLdpLspEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of LDP LSPs which
+        map to the mplsInSegmentTable in the
+        MPLS-LSR-MIB module."
+    ::= { mplsLdpSessionObjects 6 }
+
+mplsInSegmentLdpLspEntry OBJECT-TYPE
+    SYNTAX      MplsInSegmentLdpLspEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information
+        on a single LDP LSP which is represented by
+        a session's index triple (mplsLdpEntityLdpId,
+        mplsLdpEntityIndex, mplsLdpPeerLdpId) AND the
+        index for the mplsInSegmentTable
+        (mplsInSegmentLdpLspLabelIndex) from the
+        MPLS-LSR-MIB.
+
+        The information contained in a row is read-only."
+    INDEX       { prvtcrldpPmIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsInSegmentLdpLspIndex
+                }
+    ::= { mplsInSegmentLdpLspTable 1 }
+
+MplsInSegmentLdpLspEntry ::= SEQUENCE {
+    mplsInSegmentLdpLspIndex                 MplsIndexType,
+    mplsInSegmentLdpLspLabelType             MplsLdpLabelType,
+    mplsInSegmentLdpLspType                  MplsLspType
+}
+
+mplsInSegmentLdpLspIndex OBJECT-TYPE
+    SYNTAX        MplsIndexType
+    MAX-ACCESS    not-accessible
+    STATUS        current
+    DESCRIPTION
+        "This contains the same value as the
+        mplsInSegmentIndex in the
+        MPLS-LSR-MIB's mplsInSegmentTable."
+    ::= { mplsInSegmentLdpLspEntry 1 }
+
+mplsInSegmentLdpLspLabelType  OBJECT-TYPE
+    SYNTAX        MplsLdpLabelType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The Layer 2 Label Type."
+    ::= { mplsInSegmentLdpLspEntry 2 }
+
+mplsInSegmentLdpLspType OBJECT-TYPE
+    SYNTAX        MplsLspType
+    MAX-ACCESS    read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of LSP connection."
+    ::= { mplsInSegmentLdpLspEntry 3 }
+
+--
+--  Session Label (LSP) Mapping to LSR MIB's
+--  Out Segment LIB Information.
+--
+
+mplsOutSegmentLdpLspTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsOutSegmentLdpLspEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of LDP LSPs which
+        map to the mplsOutSegmentTable in the
+       MPLS-LSR-MIB."
+    ::= { mplsLdpSessionObjects 7 }
+
+mplsOutSegmentLdpLspEntry OBJECT-TYPE
+    SYNTAX      MplsOutSegmentLdpLspEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information
+        on a single LDP LSP which is represented by
+        a session's index triple (mplsLdpEntityLdpId,
+        mplsLdpEntityIndex, mplsLdpPeerLdpId) AND the
+        index (mplsOutSegmentLdpLspIndex)
+        for the mplsOutSegmentTable.
+
+        The information contained in a row is read-only."
+    INDEX       { prvtcrldpPmIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsOutSegmentLdpLspIndex
+                }
+    ::= { mplsOutSegmentLdpLspTable 1 }
+
+MplsOutSegmentLdpLspEntry ::= SEQUENCE {
+    mplsOutSegmentLdpLspIndex                 MplsIndexType,
+    mplsOutSegmentLdpLspLabelType             MplsLdpLabelType,
+    mplsOutSegmentLdpLspType                  MplsLspType
+}
+
+mplsOutSegmentLdpLspIndex OBJECT-TYPE
+    SYNTAX       MplsIndexType
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This contains the same value as the
+        mplsOutSegmentIndex in the
+        MPLS-LSR-MIB's mplsOutSegmentTable."
+    ::= { mplsOutSegmentLdpLspEntry 1 }
+
+mplsOutSegmentLdpLspLabelType  OBJECT-TYPE
+    SYNTAX        MplsLdpLabelType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The Layer 2 Label Type."
+    ::= { mplsOutSegmentLdpLspEntry 2 }
+
+mplsOutSegmentLdpLspType OBJECT-TYPE
+    SYNTAX        MplsLspType
+    MAX-ACCESS    read-only
+    STATUS        current
+    DESCRIPTION
+        "The type of LSP connection."
+    ::= { mplsOutSegmentLdpLspEntry 3 }
+
+--
+-- Mpls FEC Table
+--
+
+mplsFecObjects OBJECT IDENTIFIER ::=
+                           { mplsLdpSessionObjects 10 }
+
+mplsFecLastChange OBJECT-TYPE
+    SYNTAX  TimeStamp
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The value of sysUpTime at the time of the most
+        recent addition/deletion of an entry
+        to/from the mplsLdpFectTable or
+        the most recent change in values to any objects
+        in the mplsLdpFecTable.
+
+        If no such changes have occurred since the last
+        re-initialization of the local management subsystem,
+        then this object contains a zero value."
+   ::= { mplsFecObjects 1 }
+
+mplsFecTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsFecEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table represents the FEC
+        (Forwarding Equivalence Class)
+        Information associated with an LSP."
+    ::= { mplsFecObjects 2 }
+
+mplsFecEntry OBJECT-TYPE
+    SYNTAX      MplsFecEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Each row represents a single FEC Element."
+    INDEX       { prvtcrldpPmIndex,
+                  mplsFecIndex }
+    ::= { mplsFecTable 1 }
+
+MplsFecEntry ::= SEQUENCE {
+    mplsFecIndex             Unsigned32,
+    mplsFecType              INTEGER,
+    mplsFecAddrType            InetAddressType,
+    mplsFecAddr                InetAddress,
+    mplsFecAddrPrefixLength    InetAddressPrefixLength,
+    mplsFecStorageType       StorageType
+    -- mplsFecRowStatus         RowStatus
+}
+
+mplsFecIndex OBJECT-TYPE
+    SYNTAX      Unsigned32(1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The index which uniquely identifies this entry."
+    ::= { mplsFecEntry 1 }
+
+mplsFecType  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   prefix(1),
+                   hostAddress(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The type of the FEC.  If the value of this object
+        is 'prefix(1)' then the FEC type described by this
+        row is an address prefix.
+
+        If the value of this object is 'hostAddress(2)' then
+        the FEC type described by this row is a host address."
+    REFERENCE
+        "RFC3036, Section 3.4.1. FEC TLV."
+    ::= { mplsFecEntry 2 }
+
+mplsFecAddrType  OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is the type of the
+        Internet address.  The value of this object,
+        decides how the value of the mplsFecAddr object
+        is interpreted."
+    REFERENCE
+        "RFC3036, Section 3.4.1. FEC TLV."
+    ::= { mplsFecEntry 4 }
+
+mplsFecAddr     OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The value of this object is interpreted based
+        on the value of the 'mplsFecAddrType' object.
+
+        This address is then further interpretted as
+        an being used with the address prefix,
+        or as the host address.  This further interpretation
+        is indicated by the 'mplsFecType' object.
+        In other words, the FEC element is populated
+        according to the Prefix FEC Element value encoding, or
+        the Host Address FEC Element encoding."
+    REFERENCE
+        "RFC3036, Section 3.4.1 FEC TLV."
+    ::= { mplsFecEntry 5 }
+
+mplsFecAddrPrefixLength  OBJECT-TYPE
+    SYNTAX      InetAddressPrefixLength
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of the 'mplsFecType' is 'hostAddress(2)' then
+        this object is undefined.
+
+        If the value of 'mplsFecType' is 'prefix(1)' then the
+        value of this object is the length in bits of the address
+        prefix represented by 'mplsFecAddr', or zero.  If the
+        value of this object is zero, this indicates that the
+        prefix matches all addresses.  In this case the address
+        prefix MUST also be zero (i.e., 'mplsFecAddr' should have
+        the value of zero)."
+    REFERENCE
+        "RFC3036, Section 3.4.1. FEC TLV."
+    DEFVAL { 0 }
+    ::= { mplsFecEntry 3 }
+
+mplsFecStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsFecEntry 6 }
+
+-- mplsFecRowStatus OBJECT-TYPE
+--     SYNTAX      RowStatus
+--     MAX-ACCESS  read-only
+--     STATUS      current
+--     DESCRIPTION
+--         "The status of this conceptual row.  If the value of this
+--         object is 'active(1)', then none of the writable objects
+--         of this entry can be modified, except to set this object
+--         to 'destroy(6)'.
+
+--         NOTE: if this row is being referenced by any entry in
+--         the mplsLdpLspFecTable, then a request to destroy
+--         this row, will result in an inconsistentValue error."
+--     ::= { mplsFecEntry 7 }
+
+--
+--  LDP LSP FEC Table
+--
+
+mplsLdpLspFecLastChange OBJECT-TYPE
+   SYNTAX TimeStamp
+   MAX-ACCESS read-only
+   STATUS current
+   DESCRIPTION
+        "The value of sysUpTime at the time of the most
+        recent addition/deletion of an entry
+        to/from the mplsLdpLspFecTable or
+        the most recent change in values to any objects in the
+        mplsLdpLspFecTable.
+
+        If no such changes have occurred since the last
+        re-initialization of the local management subsystem,
+        then this object contains a zero value."
+  ::= { mplsLdpSessionObjects 11 }
+
+mplsLdpLspFecTable OBJECT-TYPE
+   SYNTAX      SEQUENCE OF MplsLdpLspFecEntry
+   MAX-ACCESS  not-accessible
+   STATUS      current
+   DESCRIPTION
+      "A table which shows the relationship between
+      LDP LSPs and FECs.  Each row represents
+      a single LDP LSP to FEC association."
+  ::= { mplsLdpSessionObjects 12 }
+
+mplsLdpLspFecEntry OBJECT-TYPE
+   SYNTAX     MplsLdpLspFecEntry
+   MAX-ACCESS not-accessible
+   STATUS     current
+   DESCRIPTION
+      "An entry represents a LDP LSP
+      to FEC association."
+   INDEX       { prvtcrldpPmIndex,
+                 mplsLdpEntityLdpId,
+                 mplsLdpEntityIndex,
+                 mplsLdpPeerLdpId,
+                 mplsLdpLspFecSegment,
+                 mplsLdpLspFecSegmentIndex,
+                 mplsLdpLspFecIndex
+                }
+   ::= { mplsLdpLspFecTable 1 }
+
+MplsLdpLspFecEntry ::= SEQUENCE {
+   mplsLdpLspFecSegment       INTEGER,
+   mplsLdpLspFecSegmentIndex  MplsIndexType,
+   mplsLdpLspFecIndex         Integer32  ,
+   mplsLdpLspFecStorageType   StorageType,
+   mplsLdpLspFecRowStatus     RowStatus
+}
+
+mplsLdpLspFecSegment OBJECT-TYPE
+    SYNTAX INTEGER {
+                       inSegment(1),
+                       outSegment(2)
+                   }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "If the value is inSegment(1), then this
+       indicates that the following index,
+       mplsLdpLspFecSegmentIndex, contains the same
+       value as the mplsInSegmentLdpLspIndex.
+
+       Otherwise, if the value of this object is
+       outSegment(2),  then this
+       indicates that following index,
+       mplsLdpLspFecSegmentIndex, contains the same
+       value as the mplsOutSegmentLdpLspIndex."
+    ::= { mplsLdpLspFecEntry 1 }
+
+mplsLdpLspFecSegmentIndex OBJECT-TYPE
+    SYNTAX      MplsIndexType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This index is interpretted by using the value
+       of the mplsLdpLspFecSegment.
+
+       If the mplsLdpLspFecSegment is inSegment(1),
+       then this index has the same value as
+       mplsInSegmentLdpLspIndex.
+
+       If the mplsLdpLspFecSegment is outSegment(2),
+       then this index has the same value as
+       mplsOutSegmentLdpLspIndex."
+    ::= { mplsLdpLspFecEntry 2 }
+
+mplsLdpLspFecIndex   OBJECT-TYPE
+    SYNTAX      Integer32(1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This index identifies the FEC entry in the
+        mplsFecTable associated with this session.
+        In other words, the value of this index
+        is the same as the value of the mplsFecIndex
+        that denotes the FEC associated with this
+        Session."
+    ::= { mplsLdpLspFecEntry 3 }
+
+mplsLdpLspFecStorageType  OBJECT-TYPE
+   SYNTAX      StorageType
+   MAX-ACCESS  read-create
+   STATUS      current
+   DESCRIPTION
+       "The storage type for this conceptual row.
+       Conceptual rows having the value 'permanent(4)'
+       need not allow write-access to any columnar
+       objects in the row."
+   DEFVAL { nonVolatile }
+   ::= { mplsLdpLspFecEntry 4 }
+
+mplsLdpLspFecRowStatus  OBJECT-TYPE
+   SYNTAX     RowStatus
+   MAX-ACCESS read-create
+   STATUS     current
+   DESCRIPTION
+       "The status of this conceptual row.  If the
+        value of this object is 'active(1)', then
+        none of the writable objects of this entry
+        can be modified.
+
+        The Agent should delete this row when
+        the session ceases to exist.  If an
+        operator wants to associate the session with
+        a different FEC, the recommended
+        procedure is (as described in detail in the section
+        entitled, 'Changing Values After Session
+        Establishment', and again described in the
+        DESCRIPTION clause of the
+        mplsLdpEntityAdminStatus object)
+        is to set the mplsLdpEntityAdminStatus to
+        down, thereby explicitly causing a session
+        to be torn down. This will also
+        cause this entry to be deleted.
+
+        Then, set the mplsLdpEntityAdminStatus
+        to enable which enables a new session to be initiated.
+        Once the session is initiated, an entry may be
+        added to this table to associate the new session
+        with a FEC."
+   ::= { mplsLdpLspFecEntry 5 }
+
+--
+-- Address Message/Address Withdraw Message Information
+--
+-- This information is associated with a specific Session
+-- because Label Address Messages are sent after session
+-- initialization has taken place.
+--
+
+mplsLdpSessionPeerAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpSessionPeerAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table 'extends' the mplsLdpSessionTable.
+        This table is used to store Label Address Information
+        from Label Address Messages received by this LSR from
+        Peers.  This table is read-only and should be updated
+        when Label Withdraw Address Messages are received, i.e.,
+        Rows should be deleted as appropriate.
+
+        NOTE:  since more than one address may be contained
+        in a Label Address Message, this table 'sparse augments',
+        the mplsLdpSessionTable's information."
+    ::= { mplsLdpSessionObjects 13 }
+
+mplsLdpSessionPeerAddrEntry OBJECT-TYPE
+    SYNTAX      MplsLdpSessionPeerAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information on
+        a session's single next hop address which was
+        advertised in an Address Message from the LDP peer.
+        The information contained in a row is read-only."
+    INDEX       { prvtcrldpPmIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsLdpSessionPeerAddrIndex
+                }
+    ::= { mplsLdpSessionPeerAddrTable 1 }
+
+MplsLdpSessionPeerAddrEntry ::= SEQUENCE {
+    mplsLdpSessionPeerAddrIndex       Unsigned32,
+    mplsLdpSessionPeerNextHopAddrType InetAddressType,
+    mplsLdpSessionPeerNextHopAddr     InetAddress
+}
+
+mplsLdpSessionPeerAddrIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An index which uniquely identifies this entry within
+        a given session."
+    ::= { mplsLdpSessionPeerAddrEntry 1 }
+
+mplsLdpSessionPeerNextHopAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The internetwork layer address type of this Next Hop
+        Address as specified in the Label Address Message
+        associated with this Session. The value of this
+        object indicates how to interpret the value of
+        mplsLdpSessionPeerNextHopAddr."
+    ::= { mplsLdpSessionPeerAddrEntry 2 }
+
+mplsLdpSessionPeerNextHopAddr OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The next hop address.  The type of this address
+        is specified by the value of the
+        mplsLdpSessionPeerNextHopAddrType."
+    REFERENCE
+        "RFC3036, Section 2.7. LDP Identifiers
+        and Next Hop Addresses"
+       ::= { mplsLdpSessionPeerAddrEntry 3 }
+
+--
+-- The MPLS Label Distribution Protocol Entity Index Next
+--
+
+mplsLdpEntityIndexNextTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityIndexNextEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains the next available values of
+        mplsLdpEntityIndex for all entities."
+    ::= { mplsLdpEntityObjects 2 }
+
+mplsLdpEntityIndexNextEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityIndexNextEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents the next available
+        mplsLdpEntityIndex for a specific LDP entity.
+        This MIB table is indexed by the PRVT-LDP entity Index."
+    INDEX       { prvtcrldpSigIndex}
+    ::= { mplsLdpEntityIndexNextTable 1 }
+
+MplsLdpEntityIndexNextEntry ::= SEQUENCE {
+    mplsLdpEntityIndexNext         Unsigned32 }
+
+mplsLdpEntityIndexNext  OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS     read-only
+    STATUS         current
+    DESCRIPTION
+        "This object contains an appropriate value to
+        be used for mplsLdpEntityIndex when creating
+        entries in the mplsLdpEntityTable. The value
+        0 indicates that no unassigned entries are
+        available. To obtain the mplsLdpEntityIndex
+        value for a new entry, the manager issues a
+        management protocol retrieval operation to obtain
+        the current value of this object.  After each
+        retrieval, the agent should modify the value to
+        the next unassigned index."
+   ::= { mplsLdpEntityIndexNextEntry 1 }
+
+---
+--- Notifications
+---
+
+mplsLdpInitSessionThresholdExceeded NOTIFICATION-TYPE
+     OBJECTS     {
+                   mplsLdpEntityInitSessionThreshold
+                 }
+     STATUS      current
+     DESCRIPTION
+        "This notification is generated when the value of
+        the 'mplsLdpEntityInitSessionThreshold' object
+        is not zero, and the number of Session
+        Initialization messages exceeds the value
+        of the 'mplsLdpEntityInitSessionThreshold' object."
+
+     ::= { mplsLdpNotifications 1 }
+
+mplsLdpPathVectorLimitMismatch NOTIFICATION-TYPE
+     OBJECTS     {
+                   mplsLdpEntityPathVectorLimit,
+                   mplsLdpPeerPathVectorLimit
+                 }
+     STATUS      current
+     DESCRIPTION
+        "This notification is sent when the
+        'mplsLdpEntityPathVectorLimit' does NOT match
+        the value of the 'mplsLdpPeerPathVectorLimit' for
+        a specific Entity."
+
+     ::= { mplsLdpNotifications 2 }
+
+mplsLdpSessionUp NOTIFICATION-TYPE
+     OBJECTS     {
+                    mplsLdpSessionState,
+                    mplsLdpSessionDiscontinuityTime,
+                    mplsLdpSessionStatsUnknownMesTypeErrors,
+                    mplsLdpSessionStatsUnknownTlvErrors
+                 }
+     STATUS      current
+     DESCRIPTION
+        "If this notification is sent when the
+        value of 'mplsLdpSessionState' enters 
+        the 'operational(5)' state."          
+
+     ::= { mplsLdpNotifications 3 }
+
+mplsLdpSessionDown NOTIFICATION-TYPE
+     OBJECTS     {
+                    mplsLdpSessionState,
+                    mplsLdpSessionDiscontinuityTime,
+                    mplsLdpSessionStatsUnknownMesTypeErrors,
+                    mplsLdpSessionStatsUnknownTlvErrors
+
+                 }
+     STATUS      current
+     DESCRIPTION
+        "This notification is sent when the  
+        value of 'mplsLdpSessionState' leaves
+        the 'operational(5)' state."                                                                         
+
+     ::= { mplsLdpNotifications 4 }
+
+
+--****************************************************************
+-- Module Conformance Statement
+--****************************************************************
+
+mplsLdpGroups
+    OBJECT IDENTIFIER ::= { mplsLdpConformance 1 }
+
+mplsLdpCompliances
+    OBJECT IDENTIFIER ::= { mplsLdpConformance 2 }
+
+--
+-- Full Compliance
+--
+
+mplsLdpModuleFullCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support
+        for read-create and read-write.  In other
+        words, both monitoring and configuration
+        are available when using this MODULE-COMPLIANCE."
+
+    MODULE -- this module
+        MANDATORY-GROUPS    { mplsLdpGeneralGroup,
+                              mplsLdpNotificationsGroup
+                            }
+    GROUP mplsLdpLspGroup
+    DESCRIPTION
+        "This group must be supported if the LSR MIB is
+        implemented, specifically the mplsInSegmentTable,
+        the mplsOutSegmentTable or the mplsXCTable."
+
+    OBJECT mplsLdpEntityTargetPeerAddrType
+    SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+       "An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT mplsLdpEntityTargetPeerAddr
+    SYNTAX InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+        "An implementation is only required to support IPv4 and
+        globally unique IPv6 addresses."
+
+    OBJECT mplsLdpEntityRowStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not
+        required."
+
+    OBJECT mplsFecAddrType
+    SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+       "An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT mplsFecAddr
+    SYNTAX InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+        "An implementation is only required to support IPv4 and
+        globally unique IPv6 addresses."
+
+    -- OBJECT mplsFecRowStatus
+    -- SYNTAX RowStatus { active(1) }
+    -- WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    -- DESCRIPTION
+    --     "Support for createAndWait and notInService is not
+    --     required."
+
+    OBJECT mplsLdpLspFecRowStatus
+    SYNTAX RowStatus { active(1) }
+    WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    DESCRIPTION
+        "Support for createAndWait and notInService is not
+        required."
+
+    OBJECT mplsLdpSessionPeerNextHopAddrType
+    SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+        "An implementation is only required to support
+        'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT mplsLdpSessionPeerNextHopAddr
+    SYNTAX InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+        and globally unique IPv6 addresses."
+
+    ::= { mplsLdpCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+mplsLdpModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support
+        for read-only.  In other words, only monitoring
+        is available by implementing this MODULE-COMPLIANCE."
+
+    MODULE -- this module
+        MANDATORY-GROUPS    { mplsLdpGeneralGroup,
+                              mplsLdpNotificationsGroup
+                            }
+
+    GROUP mplsLdpLspGroup
+    DESCRIPTION
+        "This group must be supported if the LSR MIB is
+        implemented, specifically the mplsInSegmentTable,
+        the mplsOutSegmentTable or the mplsXCTable."
+
+    OBJECT       mplsLdpEntityProtocolVersion
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAdminStatus
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityMaxPduLength
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityKeepAliveHoldTimer
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityHelloHoldTimer
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityInitSessionThreshold
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityLabelDistMethod
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityLabelRetentionMode
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityPathVectorLimit
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityHopCountLimit
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityTransportAddrKind
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityTargetPeer
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityTargetPeerAddrType
+    SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required.
+       An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT       mplsLdpEntityTargetPeerAddr
+    SYNTAX       InetAddress (SIZE(0|4|16))
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required.
+        An implementation is only required to support IPv4 and
+        globally unique IPv6 addresses."
+
+    OBJECT       mplsLdpEntityLabelType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT mplsLdpEntityRowStatus
+    SYNTAX RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and active is the
+        only status that needs to be supported."
+
+    OBJECT       mplsFecType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsFecAddrPrefixLength
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsFecAddrType
+    SYNTAX       InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required.
+       An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+    OBJECT        mplsFecAddr
+    SYNTAX        InetAddress (SIZE(0|4|16))
+    MIN-ACCESS    read-only
+    DESCRIPTION
+        "Write access is not required.
+        An implementation is only required to support IPv4 and
+        globally unique IPv6 addresses."
+
+    OBJECT       mplsFecStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    -- OBJECT mplsFecRowStatus
+    -- SYNTAX RowStatus { active(1) }
+    -- MIN-ACCESS   read-only
+    -- DESCRIPTION
+    --     "Write access is not required, and active is the
+    --     only status that needs to be supported."
+
+    OBJECT       mplsLdpLspFecStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT mplsLdpLspFecRowStatus
+    SYNTAX RowStatus { active(1) }
+    MIN-ACCESS   read-only
+    DESCRIPTION
+        "Write access is not required, and active is the
+        only status that needs to be supported."
+
+    OBJECT mplsLdpSessionPeerNextHopAddrType
+    SYNTAX InetAddressType { unknown(0), ipv4(1), ipv6(2) }
+    DESCRIPTION
+       "An implementation is only required to support
+       'unknown(0)', IPv4 and globally unique IPv6 addresses."
+
+
+    OBJECT mplsLdpSessionPeerNextHopAddr
+    SYNTAX InetAddress (SIZE(0|4|16))
+    DESCRIPTION
+        "An implementation is only required to support IPv4
+        and globally unique IPv6 addresses."
+
+    ::= { mplsLdpCompliances 2 }
+
+-- units of conformance
+
+mplsLdpGeneralGroup OBJECT-GROUP
+    OBJECTS {
+    mplsLdpLsrId,
+    mplsLdpLsrLoopDetectionCapable,
+    mplsLdpEntityIndexNext,
+    mplsLdpEntityProtocolVersion,
+    mplsLdpEntityAdminStatus,
+    mplsLdpEntityOperStatus,
+    mplsLdpEntityWellKnownTcpDiscoveryPort,
+    mplsLdpEntityWellKnownUdpDiscoveryPort,
+    mplsLdpEntityMaxPduLength,
+    mplsLdpEntityKeepAliveHoldTimer,
+    mplsLdpEntityHelloHoldTimer,
+    mplsLdpEntityInitSessionThreshold,
+    mplsLdpEntityLabelDistMethod,
+    mplsLdpEntityLabelRetentionMode,
+    mplsLdpEntityPathVectorLimit,
+    mplsLdpEntityHopCountLimit,
+    mplsLdpEntityTransportAddrKind,
+    mplsLdpEntityTargetPeer,
+    mplsLdpEntityTargetPeerAddrType,
+    mplsLdpEntityTargetPeerAddr,
+    mplsLdpEntityLabelType,
+    mplsLdpEntityDiscontinuityTime,
+    mplsLdpEntityStorageType,
+    mplsLdpEntityRowStatus,
+    mplsLdpEntityWildcardEntity,
+    mplsLdpEntityStatsSessionAttempts,
+    mplsLdpEntityStatsSessionRejectedNoHelloErrors,
+    mplsLdpEntityStatsSessionRejectedAdErrors,
+    mplsLdpEntityStatsSessionRejectedMaxPduErrors,
+    mplsLdpEntityStatsSessionRejectedLRErrors,
+    mplsLdpEntityStatsBadLdpIdentifierErrors,
+    mplsLdpEntityStatsBadPduLengthErrors,
+    mplsLdpEntityStatsBadMessageLengthErrors,
+    mplsLdpEntityStatsBadTlvLengthErrors,
+    mplsLdpEntityStatsMalformedTlvValueErrors,
+    mplsLdpEntityStatsKeepAliveTimerExpErrors,
+    mplsLdpEntityStatsShutdownReceivedNotifications,
+    mplsLdpEntityStatsShutdownSentNotifications,
+    mplsLdpPeerLastChange,
+    mplsLdpPeerLabelDistMethod,
+    mplsLdpPeerPathVectorLimit,
+    mplsLdpPeerTransportAddrType,
+    mplsLdpPeerTransportAddr,
+    mplsLdpHelloAdjacencyHoldTimeRemaining,
+    mplsLdpHelloAdjacencyHoldTime,
+    mplsLdpHelloAdjacencyType,
+    mplsLdpHelloAdjacencyConfiguredHoldTime,
+    mplsLdpHelloAdjacencyPeerHoldTime,
+    mplsLdpSessionStateLastChange,
+    mplsLdpSessionState,
+    mplsLdpSessionRole,
+    mplsLdpSessionProtocolVersion,
+    mplsLdpSessionKeepAliveHoldTimeRemaining,
+    mplsLdpSessionKeepAliveTime,
+    mplsLdpSessionMaxPduLength,
+    mplsLdpSessionDiscontinuityTime,
+    mplsLdpSessionConfiguredHoldTime,
+    mplsLdpSessionPeerHoldTime,
+    mplsLdpSessionHoldTimeInUse,
+    mplsLdpSessionStatsUnknownMesTypeErrors,
+    mplsLdpSessionStatsUnknownTlvErrors,
+    mplsLdpSessionPeerNextHopAddrType,
+    mplsLdpSessionPeerNextHopAddr,
+    mplsFecLastChange,
+    mplsFecType,
+    mplsFecAddrType,
+    mplsFecAddr,
+    mplsFecAddrPrefixLength,
+    mplsFecStorageType
+    -- mplsFecRowStatus
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to all MPLS LDP implementations."
+    ::= { mplsLdpGroups 1 }
+
+mplsLdpLspGroup OBJECT-GROUP
+    OBJECTS {
+    mplsInSegmentLdpLspLabelType,
+    mplsInSegmentLdpLspType,
+    mplsOutSegmentLdpLspLabelType,
+    mplsOutSegmentLdpLspType,
+    mplsLdpLspFecLastChange,
+    mplsLdpLspFecStorageType,
+    mplsLdpLspFecRowStatus
+    }
+    STATUS    current
+    DESCRIPTION
+        "These objects are for LDP implementations
+        which interface to the Label Information Base (LIB)
+        in the MPLS-LSR-STD-MIB.  The LIB is
+        represented in the mplsInSegmentTable,
+        mplsOutSegmentTable and mplsXCTable."
+    ::= { mplsLdpGroups 2 }
+
+mplsLdpNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS { mplsLdpInitSessionThresholdExceeded,
+                    mplsLdpPathVectorLimitMismatch,
+                    mplsLdpSessionUp,
+                    mplsLdpSessionDown
+                       }
+    STATUS   current
+    DESCRIPTION
+        "The notification for an MPLS LDP implementation."
+    ::= { mplsLdpGroups 3 }
+
+mplsLdpAtmObjects       OBJECT IDENTIFIER
+                            ::= { mplsLdpStdMIB 4 }
+mplsLdpAtmConformance   OBJECT IDENTIFIER
+                            ::= { mplsLdpStdMIB 5 }
+
+--****************************************************************
+-- MPLS LDP ATM Objects
+--****************************************************************
+--
+-- Ldp Entity Objects for ATM
+--
+
+mplsLdpEntityAtmObjects  OBJECT IDENTIFIER ::=
+                              { mplsLdpAtmObjects 1 }
+
+mplsLdpEntityAtmTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityAtmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains ATM specific information
+        which could be used in the
+        'Optional Parameters' and other ATM specific
+        information."
+
+    ::= { mplsLdpEntityAtmObjects 1 }
+
+mplsLdpEntityAtmEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityAtmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents the ATM parameters
+        and ATM information for this LDP entity."
+    INDEX       {  prvtcrldpSigIndex,
+                   mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex
+                }
+    ::= { mplsLdpEntityAtmTable 1 }
+
+
+MplsLdpEntityAtmEntry ::= SEQUENCE {
+    mplsLdpEntityAtmIfIndexOrZero        InterfaceIndexOrZero,
+    mplsLdpEntityAtmMergeCap             INTEGER,
+    mplsLdpEntityAtmLRComponents         Unsigned32,
+    mplsLdpEntityAtmVcDirectionality     INTEGER,
+    mplsLdpEntityAtmLsrConnectivity      INTEGER,
+    mplsLdpEntityAtmDefaultControlVpi    INTEGER,             -- Original Type: AtmVpIdentifier
+    mplsLdpEntityAtmDefaultControlVci    MplsAtmVcIdentifier,
+    mplsLdpEntityAtmUnlabTrafVpi         INTEGER,             -- Original Type: AtmVpIdentifier
+    mplsLdpEntityAtmUnlabTrafVci         MplsAtmVcIdentifier,
+    mplsLdpEntityAtmStorageType          StorageType
+    -- mplsLdpEntityAtmRowStatus            RowStatus
+}
+
+mplsLdpEntityAtmIfIndexOrZero  OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This value represents either the InterfaceIndex
+       or 0 (zero).  The value of zero means that the
+       InterfaceIndex is not known.
+
+       However, if the InterfaceIndex is known, then it must
+       be represented by this value.
+
+       If an InterfaceIndex becomes known, then the
+       network management entity (e.g., SNMP agent) responsible
+       for this object MUST change the value from 0 (zero) to the
+       value of the InterfaceIndex.  If an ATM Label is
+       being used in forwarding data, then the value of this
+       object MUST be the InterfaceIndex."
+    ::= { mplsLdpEntityAtmEntry 1 }
+
+mplsLdpEntityAtmMergeCap OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notSupported(0),
+                    vpMerge(1),
+                    vcMerge(2),
+                    vpAndVcMerge(3)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Denotes the Merge Capability of this Entity.
+        This is the EXACT value for the ATM Session
+        Parameter, field M (for ATM Merge Capabilities).
+        The ATM Session Parameter is an optional
+        parameter in the Initialization Message.
+
+        The description from rfc3036.txt is:
+
+        'M, ATM Merge Capabilities
+           Specifies the merge capabilities of an ATM switch.  The
+           following values are supported in this version of the
+           specification:
+
+                  Value          Meaning
+
+                    0            Merge not supported
+                    1            VP Merge supported
+                    2            VC Merge supported
+                    3            VP & VC Merge supported
+
+           If the merge capabilities of the LSRs differ, then:
+           -  Non-merge and VC-merge LSRs may freely interoperate.
+
+           -  The interoperability of VP-merge-capable switches
+              with non-VP-merge-capable switches is a subject
+              for future study.  When the LSRs differ on the
+              use of VP-merge, the session is established,
+              but VP merge is not used.'
+
+           Please refer to the following reference for a
+           complete description of this feature."
+
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityAtmEntry 2 }
+
+mplsLdpEntityAtmLRComponents OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of Label Range Components in the Initialization
+        message.  This also represents the number of entries
+        in the mplsLdpEntityAtmLRTable which correspond
+        to this entry.
+
+        This is the EXACT value for the ATM Session Parameter,
+        field N (for Number of label range components).
+        The ATM Session Parameter is an optional parameter
+        in the Initialization Message.
+
+        The description from rfc3036.txt is:
+
+        'N, Number of label range components
+           Specifies the number of ATM Label Range
+           Components included in the TLV.'
+
+         Please refer to the following reference for
+         a complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityAtmEntry 3 }
+
+mplsLdpEntityAtmVcDirectionality OBJECT-TYPE
+    SYNTAX      INTEGER {
+                           bidirectional(0),
+                           unidirectional(1)
+                        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 'bidirectional(0)',
+        a given VCI, within a given VPI, is used as a
+        label for both directions independently.
+
+        If the value of this object is 'unidirectional(1)',
+        a given VCI within a VPI designates one direction.
+
+        This is the EXACT value for the ATM Session Parameter,
+        field D (for VC Directionality).  The ATM Session
+        Parameter is an optional parameter in the
+        Initialization Message.
+
+        The description from rfc3036.txt is:
+
+        'D, VC Directionality
+           A value of 0 specifies bidirectional VC capability,
+           meaning the LSR can (within a given VPI) support
+           the use of a given VCI as a label for both link
+           directions independently.  A value of 1
+           specifies unidirectional VC capability, meaning
+           (within a given VPI) a given VCI may appear in
+           a label mapping for one direction on the link
+           only.  When either or both of the peers
+           specifies unidirectional VC capability, both
+           LSRs use unidirectional VC label assignment for
+           the link as follows.  The LSRs compare their
+           LDP Identifiers as unsigned integers.  The LSR
+           with the larger LDP Identifier may assign
+           only odd-numbered VCIs in the VPI/VCI
+           range as labels.  The system with the smaller
+           LDP Identifier may assign only even-numbered
+           VCIs in the VPI/VCI range as labels.'
+
+           Please refer to the following reference
+           for a complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityAtmEntry 4 }
+
+mplsLdpEntityAtmLsrConnectivity OBJECT-TYPE
+    SYNTAX      INTEGER {
+                   direct(1),
+                   indirect(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The peer LSR may be connected indirectly by means
+        of an ATM VP so that the VPI values may be different
+        on either endpoint so the label MUST be encoded
+        entirely within the VCI field."
+    DEFVAL { direct }
+    ::= { mplsLdpEntityAtmEntry 5 }
+
+mplsLdpEntityAtmDefaultControlVpi OBJECT-TYPE
+    SYNTAX      INTEGER             -- Original Type: AtmVpIdentifier
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The default VPI value for the non-MPLS connection.  The
+        default value of this is 0 (zero) but other values may
+        be configured.  This object allows a different value
+        to be configured."
+    DEFVAL { 0 }
+    ::= { mplsLdpEntityAtmEntry 6 }
+
+mplsLdpEntityAtmDefaultControlVci OBJECT-TYPE
+    SYNTAX      MplsAtmVcIdentifier
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The Default VCI value for a non-MPLS connection.  The
+        default value of this is 32 but other values may be
+        configured.  This object allows a different value to
+        be configured."
+    DEFVAL { 32 }
+    ::= { mplsLdpEntityAtmEntry 7 }
+
+mplsLdpEntityAtmUnlabTrafVpi OBJECT-TYPE
+    SYNTAX      INTEGER             -- Original Type: AtmVpIdentifier
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "VPI value of the VCC supporting unlabeled traffic.  This
+        non-MPLS connection is used to carry unlabeled (IP)
+        packets.  The default value is the same as the default
+        value of the 'mplsLdpEntityAtmDefaultControlVpi', however
+        another value may be configured."
+    DEFVAL  { 0 }
+    ::= { mplsLdpEntityAtmEntry 8 }
+
+mplsLdpEntityAtmUnlabTrafVci OBJECT-TYPE
+    SYNTAX      MplsAtmVcIdentifier
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "VCI value of the VCC supporting unlabeled traffic.
+        This non-MPLS connection is used to carry unlabeled (IP)
+        packets. The default value is the same as the default
+        value of the 'mplsLdpEntityAtmDefaultControlVci', however
+        another value may be configured."
+    DEFVAL  { 32 }
+    ::= { mplsLdpEntityAtmEntry 9 }
+
+mplsLdpEntityAtmStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityAtmEntry 10 }
+
+-- mplsLdpEntityAtmRowStatus OBJECT-TYPE
+--     SYNTAX      RowStatus
+--     MAX-ACCESS  read-only
+--     STATUS      current
+--     DESCRIPTION
+--         "The status of this conceptual row.  All writable
+--          objects in this row may be modified at any time,
+--          however, as described in detail in the section
+--          entitled, 'Changing Values After Session
+--          Establishment', and again described in the
+--          DESCRIPTION clause of the mplsLdpEntityAdminStatus
+--          object, if a session has been initiated with a Peer,
+--          changing objects in this table will wreak havoc
+--          with the session and interrupt traffic.  To repeat again:
+--          the recommended procedure is to set the
+--          mplsLdpEntityAdminStatus to down, thereby explicitly
+--          causing a session to be torn down. Then,
+--          change objects in this entry, then set the
+--          mplsLdpEntityAdminStatus to enable
+--          which enables a new session to be initiated."
+--     ::= { mplsLdpEntityAtmEntry 11 }
+
+--
+-- The MPLS LDP Entity ATM Label Range Table
+--
+
+mplsLdpEntityAtmLRTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MplsLdpEntityAtmLREntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The MPLS LDP Entity ATM Label Range (LR) Table.
+        The purpose of this table is to provide a mechanism
+        for configuring a contiguous range of vpi's
+        with a contiguous range of vci's, or a 'label range'
+        for LDP Entities.
+
+        LDP Entities which use ATM must have at least one
+        entry in this table.
+
+        There must exist at least one entry in this
+        table for every LDP Entity that has
+        'mplsLdpEntityLabelType' object with
+        a value of 'atmSessionParameters'."
+    ::= { mplsLdpEntityAtmObjects 2 }
+
+mplsLdpEntityAtmLREntry OBJECT-TYPE
+    SYNTAX MplsLdpEntityAtmLREntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A row in the LDP Entity ATM Label
+        Range Table.  One entry in this table contains
+        information on a single range of labels
+        represented by the configured Upper and Lower
+        Bounds VPI/VCI pairs.  These are the same
+        data used in the Initialization Message.
+
+        NOTE:  The ranges for a specific LDP Entity
+        are UNIQUE and non-overlapping.  For example,
+        for a specific LDP Entity index, there could
+        be one entry having LowerBound vpi/vci == 0/32, and
+        UpperBound vpi/vci == 0/100, and a second entry
+        for this same interface with LowerBound
+        vpi/vci == 0/101 and UpperBound vpi/vci == 0/200.
+        However, there could not be a third entry with
+        LowerBound vpi/vci == 0/200 and
+        UpperBound vpi/vci == 0/300 because this label
+        range overlaps with the second entry (i.e., both
+        entries now have 0/200).
+
+        A row will not become active unless a unique and
+        non-overlapping range is specified.
+
+        At least one label range entry for a
+        specific LDP Entity MUST
+        include the default VPI/VCI  values denoted
+        in the LDP Entity Table.
+
+        A request to create a row with an overlapping
+        range should result in an inconsistentValue
+        error."
+    INDEX       {  prvtcrldpSigIndex,
+                   mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex,
+                   mplsLdpEntityAtmLRMinVpi,
+                   mplsLdpEntityAtmLRMinVci
+                }
+    ::= { mplsLdpEntityAtmLRTable 1 }
+
+MplsLdpEntityAtmLREntry ::= SEQUENCE {
+    mplsLdpEntityAtmLRMinVpi       Integer32,             -- Original Type: AtmVpIdentifier
+    mplsLdpEntityAtmLRMinVci       MplsAtmVcIdentifier,
+    mplsLdpEntityAtmLRMaxVpi       INTEGER,             -- Original Type: AtmVpIdentifier
+    mplsLdpEntityAtmLRMaxVci       MplsAtmVcIdentifier,
+    mplsLdpEntityAtmLRStorageType  StorageType
+    -- mplsLdpEntityAtmLRRowStatus    RowStatus
+}
+
+mplsLdpEntityAtmLRMinVpi OBJECT-TYPE
+    SYNTAX Integer32(1..2147483647)             -- Original Type: AtmVpIdentifier
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The minimum VPI number configured for this range.
+        The value of zero is a valid value for the VPI portion
+        of the label."
+    ::= { mplsLdpEntityAtmLREntry 1 }
+
+mplsLdpEntityAtmLRMinVci OBJECT-TYPE
+    SYNTAX MplsAtmVcIdentifier
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The minimum VCI number configured for this range."
+    ::= { mplsLdpEntityAtmLREntry 2 }
+
+mplsLdpEntityAtmLRMaxVpi OBJECT-TYPE
+    SYNTAX INTEGER             -- Original Type: AtmVpIdentifier
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum VPI number configured for this range."
+    ::= { mplsLdpEntityAtmLREntry 3 }
+
+mplsLdpEntityAtmLRMaxVci OBJECT-TYPE
+    SYNTAX MplsAtmVcIdentifier
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum VCI number configured for this range."
+   ::= { mplsLdpEntityAtmLREntry 4 }
+
+mplsLdpEntityAtmLRStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityAtmLREntry 5 }
+
+-- mplsLdpEntityAtmLRRowStatus OBJECT-TYPE
+--     SYNTAX RowStatus
+--     MAX-ACCESS read-only
+--     STATUS current
+--     DESCRIPTION
+--         "The status of this conceptual row.  All writable
+--          objects in this row may be modified at any time,
+--          however, as described in detail in the section
+--          entitled, 'Changing Values After Session
+--          Establishment', and again described in the
+--          DESCRIPTION clause of the
+--          mplsLdpEntityAdminStatus object,
+--          if a session has been initiated with a Peer,
+--          changing objects in this table will
+--          wreak havoc with the session and interrupt traffic.
+--          To repeat again:  the recommended procedure
+--          is to set the mplsLdpEntityAdminStatus to
+--          down, thereby explicitly causing a session
+--          to be torn down. Then, change objects in this
+--          entry, then set the mplsLdpEntityAdminStatus
+--          to enable which enables a new session
+--          to be initiated."
+--     ::= { mplsLdpEntityAtmLREntry 6 }
+
+--
+-- MPLS LDP ATM Session Information
+--
+
+mplsLdpAtmSessionObjects OBJECT IDENTIFIER ::=
+                               { mplsLdpAtmObjects 2 }
+
+mplsLdpAtmSessionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpAtmSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table which relates sessions in the
+        'mplsLdpSessionTable' and their label
+        range intersections.  There could be one
+        or more label range intersections between an
+        LDP Entity and LDP Peer using ATM as the
+        underlying  media.  Each row represents
+        a single label range intersection.
+
+        This table cannot use the 'AUGMENTS'
+        clause because there is not necessarily
+        a one-to-one mapping between this table
+        and the mplsLdpSessionTable."
+    ::= { mplsLdpAtmSessionObjects 1 }
+
+mplsLdpAtmSessionEntry OBJECT-TYPE
+    SYNTAX      MplsLdpAtmSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information on a
+        single label range intersection between an LDP Entity
+        and LDP Peer.
+
+        The information contained in a row is read-only."
+    INDEX       { prvtcrldpPmIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsLdpSessionAtmLRLowerBoundVpi,
+                  mplsLdpSessionAtmLRLowerBoundVci
+
+                }
+    ::= { mplsLdpAtmSessionTable 1 }
+
+MplsLdpAtmSessionEntry ::= SEQUENCE {
+    mplsLdpSessionAtmLRLowerBoundVpi     Integer32,             -- Original Type: AtmVpIdentifier
+    mplsLdpSessionAtmLRLowerBoundVci     MplsAtmVcIdentifier,
+    mplsLdpSessionAtmLRUpperBoundVpi     INTEGER,             -- Original Type: AtmVpIdentifier
+    mplsLdpSessionAtmLRUpperBoundVci     MplsAtmVcIdentifier
+}
+
+mplsLdpSessionAtmLRLowerBoundVpi OBJECT-TYPE
+    SYNTAX Integer32(1..2147483647)             -- Original Type: AtmVpIdentifier
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The minimum VPI number for this range."
+    ::= { mplsLdpAtmSessionEntry 1 }
+
+mplsLdpSessionAtmLRLowerBoundVci OBJECT-TYPE
+    SYNTAX MplsAtmVcIdentifier
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The minimum VCI number for this range."
+    ::= { mplsLdpAtmSessionEntry 2 }
+
+mplsLdpSessionAtmLRUpperBoundVpi OBJECT-TYPE
+    SYNTAX INTEGER             -- Original Type: AtmVpIdentifier
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum VPI number for this range."
+    ::= { mplsLdpAtmSessionEntry 3 }
+
+mplsLdpSessionAtmLRUpperBoundVci OBJECT-TYPE
+    SYNTAX MplsAtmVcIdentifier
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "The maximum VCI number for this range."
+    ::= { mplsLdpAtmSessionEntry 4 }
+
+--**************************************************************
+-- Module Conformance Statement
+--**************************************************************
+
+mplsLdpAtmGroups
+    OBJECT IDENTIFIER ::= { mplsLdpAtmConformance 1 }
+
+mplsLdpAtmCompliances
+    OBJECT IDENTIFIER ::= { mplsLdpAtmConformance 2 }
+
+--
+-- Full Compliance
+--
+
+mplsLdpAtmModuleFullCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-create and read-write.  In other words,
+        both monitoring and configuration
+        are available when using this MODULE-COMPLIANCE."
+    MODULE -- this module
+    MANDATORY-GROUPS    {
+                           mplsLdpAtmGroup
+                        }
+
+
+    -- OBJECT       mplsLdpEntityAtmRowStatus
+    -- SYNTAX       RowStatus { active(1) }
+    -- WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    -- DESCRIPTION
+    --    "Support for createAndWait and notInService is not required."
+
+    -- OBJECT       mplsLdpEntityAtmLRRowStatus
+    -- SYNTAX       RowStatus { active(1) }
+    -- WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    -- DESCRIPTION
+    --    "Support for createAndWait and notInService is not required."
+
+    ::= { mplsLdpAtmCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+mplsLdpAtmModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-only.  In other words, only monitoring
+        is available by implementing this MODULE-COMPLIANCE."
+    MODULE -- this module
+    MANDATORY-GROUPS    {
+                           mplsLdpAtmGroup
+                        }
+
+    OBJECT       mplsLdpEntityAtmIfIndexOrZero
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmMergeCap
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmVcDirectionality
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmLsrConnectivity
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmDefaultControlVpi
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmDefaultControlVci
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmUnlabTrafVpi
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmUnlabTrafVci
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    -- OBJECT       mplsLdpEntityAtmRowStatus
+    -- SYNTAX       RowStatus { active(1) }
+    -- MIN-ACCESS   read-only
+    -- DESCRIPTION
+    --    "Write access is not required, and active is the
+    --    only status that needs to be supported."
+
+    OBJECT       mplsLdpEntityAtmLRMaxVpi
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmLRMaxVci
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityAtmLRStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    -- OBJECT       mplsLdpEntityAtmLRRowStatus
+    -- SYNTAX       RowStatus { active(1) }
+    -- MIN-ACCESS   read-only
+    -- DESCRIPTION
+    --    "Write access is not required, and active is the
+    --    only status that needs to be supported."
+
+    ::= { mplsLdpAtmCompliances 2 }
+
+--
+-- units of conformance
+--
+
+mplsLdpAtmGroup OBJECT-GROUP
+    OBJECTS {
+    mplsLdpEntityAtmIfIndexOrZero,
+    mplsLdpEntityAtmMergeCap,
+    mplsLdpEntityAtmLRComponents,
+    mplsLdpEntityAtmVcDirectionality,
+    mplsLdpEntityAtmLsrConnectivity,
+    mplsLdpEntityAtmDefaultControlVpi,
+    mplsLdpEntityAtmDefaultControlVci,
+    mplsLdpEntityAtmUnlabTrafVpi,
+    mplsLdpEntityAtmUnlabTrafVci,
+    mplsLdpEntityAtmStorageType,
+    -- mplsLdpEntityAtmRowStatus,
+    mplsLdpEntityAtmLRMaxVpi,
+    mplsLdpEntityAtmLRMaxVci,
+    mplsLdpEntityAtmLRStorageType,
+    -- mplsLdpEntityAtmLRRowStatus,
+    mplsLdpSessionAtmLRUpperBoundVpi,
+    mplsLdpSessionAtmLRUpperBoundVci
+
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to all MPLS LDP implementations
+        using ATM as the Layer 2."
+    ::= { mplsLdpAtmGroups 1 }
+
+mplsLdpFrameRelayObjects  OBJECT IDENTIFIER
+                           ::= { mplsLdpStdMIB 6 }
+
+mplsLdpFrameRelayConformance   OBJECT IDENTIFIER
+                           ::= { mplsLdpStdMIB 7 }
+
+--****************************************************************
+-- MPLS LDP Frame Relay Objects
+--****************************************************************
+
+--
+-- Ldp Entity Objects for Frame Relay
+--
+
+mplsLdpEntityFrameRelayObjects OBJECT IDENTIFIER ::=
+                                    { mplsLdpFrameRelayObjects 1 }
+
+mplsLdpEntityFrameRelayTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityFrameRelayEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains Frame Relay specific
+        information which could be used in the
+        'Optional Parameters' and other Frame Relay
+        specific information."
+
+    ::= { mplsLdpEntityFrameRelayObjects 1 }
+
+mplsLdpEntityFrameRelayEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityFrameRelayEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents the Frame Relay
+        optional parameters associated with the LDP entity."
+    INDEX       {  prvtcrldpSigIndex,
+                   mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex
+                }
+    ::= { mplsLdpEntityFrameRelayTable 1 }
+
+MplsLdpEntityFrameRelayEntry ::= SEQUENCE {
+    mplsLdpEntityFrameRelayIfIndexOrZero        InterfaceIndexOrZero,
+    mplsLdpEntityFrameRelayMergeCap             INTEGER,
+    mplsLdpEntityFrameRelayLRComponents         Unsigned32,
+    mplsLdpEntityFrameRelayVcDirectionality     INTEGER,
+    mplsLdpEntityFrameRelayStorageType          StorageType
+    -- mplsLdpEntityFrameRelayRowStatus            RowStatus
+}
+
+mplsLdpEntityFrameRelayIfIndexOrZero OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This value represents either the InterfaceIndex of
+       the 'ifLayer' where the Frame Relay Labels 'owned' by this
+       entry were created, or 0 (zero).  The value of zero
+       means that the InterfaceIndex is not known.  For example,
+       if the InterfaceIndex is created subsequent to the
+       Frame Relay Label's creation, then it would not be known.
+       However, if the InterfaceIndex is known, then it must
+       be represented by this value.
+
+       If an InterfaceIndex becomes known, then the
+       network management entity (e.g., SNMP agent) responsible
+       for this object MUST change the value from 0 (zero) to the
+       value of the InterfaceIndex.  If an Frame Relay Label is
+       being used in forwarding data, then the value of this
+       object MUST be the InterfaceIndex."
+    ::= { mplsLdpEntityFrameRelayEntry 1 }
+
+mplsLdpEntityFrameRelayMergeCap OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    notSupported(0),
+                    supported(1)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This represents whether or not the Frame Relay merge
+        capability is supported.  This is the EXACT value for the
+        Frame Relay Session Parameter, field M (for Frame Relay
+        Merge Capabilities).  The Frame Relay Session Parameter
+        is an optional parameter in the Initialization Message.
+
+        The description from rfc3036.txt is:
+        'M, Frame Relay Merge Capabilities
+           Specifies the merge capabilities of a Frame
+           Relay switch.  The following values are
+           supported in this version of the
+           specification:
+
+                  Value          Meaning
+
+                    0            Merge not supported
+                    1            Merge supported
+
+           Non-merge and merge Frame Relay LSRs may
+           freely interoperate.'
+
+           Please refer to the following reference for a
+           complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityFrameRelayEntry 2 }
+
+mplsLdpEntityFrameRelayLRComponents OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "Number of Label Range Components in the Initialization
+        message.  This also represents the number of entries
+        in the mplsLdpEntityFrameRelayLRTable which correspond
+        to this entry.
+
+        This is the EXACT value for the Frame Relay Session
+        Parameter, field N (for Number of label range
+        components).  The Frame Relay Session Parameter
+        is an optional parameter in the Initialization
+        Message.
+
+        The description from rfc3036.txt is:
+
+        'N, Number of label range components
+            Specifies the number of Frame Relay Label
+            Range Components included in the TLV.'
+
+         Please refer to the following reference for a
+         complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityFrameRelayEntry 3 }
+
+mplsLdpEntityFrameRelayVcDirectionality OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          bidirectional(0),
+                          unidirection(1)
+                        }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "If the value of this object is 'bidirectional(0)', then
+        the LSR supports the use of a given DLCI as a label for
+        both directions independently.  If the value of
+        this object is 'unidirectional(1)', then the LSR
+        uses the given DLCI as a label in only one direction.
+
+        This is the EXACT value for the Frame Relay Session
+        Parameter, field D (for VC Directionality).  The
+        Frame Relay Session Parameter is an optional
+        parameter in the Initialization Message.
+
+        The description from rfc3036.txt is:
+
+        'D, VC Directionality
+           A value of 0 specifies bidirectional VC capability,
+           meaning the LSR can support the use of a given
+           DLCI as a label for both link directions
+           independently.  A value of 1 specifies
+           unidirectional VC capability, meaning a given
+           DLCI may appear in a label mapping for one
+           direction on the link only.  When either or both
+           of the peers specifies unidirectional VC
+           capability, both LSRs use unidirectional VC
+           label assignment for the link as follows.  The
+           LSRs compare their LDP Identifiers as unsigned
+           integers.  The LSR with the larger LDP
+           Identifier may assign only odd-numbered DLCIs
+           in the range as labels.  The system with the
+           smaller LDP Identifier may assign only
+           even-numbered DLCIs in the range as labels.'
+
+           Please refer to the following reference for a
+           complete description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityFrameRelayEntry 4 }
+
+mplsLdpEntityFrameRelayStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityFrameRelayEntry 5 }
+
+-- mplsLdpEntityFrameRelayRowStatus OBJECT-TYPE
+--     SYNTAX      RowStatus
+--     MAX-ACCESS  read-only
+--     STATUS      current
+--     DESCRIPTION
+--         "The status of this conceptual row.  All writable
+--          objects in this row may be modified at any time,
+--          however, as described in detail in the section
+--          entitled, 'Changing Values After Session
+--          Establishment', and again described in the
+--          DESCRIPTION clause of the
+--          mplsLdpEntityAdminStatus object,
+--          if a session has been initiated with a Peer,
+--          changing objects in this table will
+--          wreak havoc with the session and interrupt
+--          traffic.  To repeat again:
+--          the recommended procedure is to set the
+--          mplsLdpEntityAdminStatus to
+--          down, thereby explicitly causing a
+--          session to be torn down. Then,
+--          change objects in this entry, then set
+--          the mplsLdpEntityAdminStatus
+--          to enable which enables a new session
+--          to be initiated."
+--     ::= { mplsLdpEntityFrameRelayEntry 6 }
+
+--
+-- Frame Relay Label Range Components
+--
+
+mplsLdpEntityFrameRelayLRTable  OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityFrameRelayLREntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table contains information about the
+        Optional Parameters for the Frame Relay Session
+        in the LDP Initialization Message, specifically
+        it contains information about the Frame Relay
+        Label Range Components.
+
+        If the value of the object
+        'mplsLdpEntityLabelType' contains the
+        value of 'frameRelaySessionParameters(3)' then
+        there must be at least one corresponding entry
+        in this table."
+    ::= { mplsLdpEntityFrameRelayObjects 2 }
+
+mplsLdpEntityFrameRelayLREntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityFrameRelayLREntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents the Frame Relay
+        Label Range Component associated with the LDP entity."
+    INDEX       {  prvtcrldpSigIndex,
+                   mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex,
+                   mplsLdpEntityFrameRelayLRMinDlci
+                }
+    ::= { mplsLdpEntityFrameRelayLRTable 1 }
+
+MplsLdpEntityFrameRelayLREntry ::= SEQUENCE {
+    mplsLdpEntityFrameRelayLRMinDlci              Integer32, -- Original Type: DLCI
+    mplsLdpEntityFrameRelayLRMaxDlci              INTEGER, -- Original Type: DLCI
+    mplsLdpEntityFrameRelayLRLen                  INTEGER,
+    mplsLdpEntityFrameRelayLRStorageType          StorageType
+    -- mplsLdpEntityFrameRelayLRRowStatus            RowStatus
+}
+
+mplsLdpEntityFrameRelayLRMinDlci OBJECT-TYPE
+    SYNTAX      Integer32(1..2147483647) -- Original Type: DLCI
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The lower bound which is supported.  This value
+        should be the same as that in the Frame Relay Label
+        Range Component's Minimum DLCI field.  The value
+        of zero is valid for the minimum DLCI field of
+        the label."
+    REFERENCE
+        "RFC3034, Use of Label Switching on Frame Relay
+        Networks Specification."
+    ::= { mplsLdpEntityFrameRelayLREntry 1 }
+
+mplsLdpEntityFrameRelayLRMaxDlci OBJECT-TYPE
+    SYNTAX      INTEGER -- Original Type: DLCI
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The upper bound which is supported.  This value
+        should be the same as that in the Frame Relay Label
+        Range Component's Maximum DLCI field."
+    ::= { mplsLdpEntityFrameRelayLREntry 2 }
+
+mplsLdpEntityFrameRelayLRLen OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    tenDlciBits(0),
+                    twentyThreeDlciBits(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object specifies the length of the DLCI bits.
+
+        This is the EXACT value for the Len field of the
+        Frame Relay Label Range Component.
+
+        The description from rfc3036.txt is:
+
+        'Len
+            This field specifies the number of bits of the DLCI.
+            The following values are supported:
+
+                 Len    DLCI bits
+
+                 0       10
+                 2       23
+
+            Len values 1 and 3 are reserved.'
+
+         Please refer to the following reference for a complete
+         description of this feature."
+     REFERENCE
+        "RFC3036, LDP Specification, Section 3.5.3
+        Initialization Message."
+    ::= { mplsLdpEntityFrameRelayLREntry 3 }
+
+mplsLdpEntityFrameRelayLRStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityFrameRelayLREntry 4 }
+
+-- mplsLdpEntityFrameRelayLRRowStatus OBJECT-TYPE
+--     SYNTAX      RowStatus
+--     MAX-ACCESS  read-only
+--     STATUS      current
+--     DESCRIPTION
+--         "The status of this conceptual row.  All writable
+--          objects in this row may be modified at any time,
+--          however, as described in detail in the section
+--          entitled, 'Changing Values After Session
+--          Establishment', and again described in the
+--          DESCRIPTION clause of the
+--          mplsLdpEntityAdminStatus object,
+--          if a session has been initiated with a Peer,
+--          changing objects in this table will
+--          wreak havoc with the session and interrupt
+--          traffic.  To repeat again:
+--          the recommended procedure is to set the
+--          mplsLdpEntityAdminStatus to down, thereby
+--          explicitly causing a session to be torn down. Then,
+--          change objects in this entry, then set the
+--          mplsLdpEntityAdminStatus to enable which enables
+--          a new session to be initiated."
+--     ::= { mplsLdpEntityFrameRelayLREntry 5 }
+
+--
+-- MPLS LDP Frame Relay Session Information
+--
+
+mplsLdpFrameRelaySessionObjects  OBJECT IDENTIFIER ::=
+                           { mplsLdpFrameRelayObjects  2 }
+
+mplsLdpFrameRelaySessionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpFrameRelaySessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "A table of Frame Relay label range intersections
+        between the LDP Entities and LDP Peers.
+        Each row represents a single label range intersection.
+
+        NOTE:  this table cannot use the 'AUGMENTS'
+        clause because there is not necessarily a one-to-one
+        mapping between this table and the
+        mplsLdpSessionTable."
+    ::= { mplsLdpFrameRelaySessionObjects 1 }
+
+mplsLdpFrameRelaySessionEntry OBJECT-TYPE
+    SYNTAX      MplsLdpFrameRelaySessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "An entry in this table represents information on a
+        single label range intersection between an
+        LDP Entity and LDP Peer.
+
+        The information contained in a row is read-only."
+    INDEX       { prvtcrldpPmIndex,
+                  mplsLdpEntityLdpId,
+                  mplsLdpEntityIndex,
+                  mplsLdpPeerLdpId,
+                  mplsLdpFrameRelaySessionMinDlci
+                }
+    ::= { mplsLdpFrameRelaySessionTable 1 }
+
+MplsLdpFrameRelaySessionEntry ::= SEQUENCE {
+    mplsLdpFrameRelaySessionMinDlci    Integer32, -- Original Type: DLCI
+    mplsLdpFrameRelaySessionMaxDlci    INTEGER, -- Original Type: DLCI
+    mplsLdpFrameRelaySessionLen        INTEGER
+}
+
+mplsLdpFrameRelaySessionMinDlci OBJECT-TYPE
+    SYNTAX      Integer32(1..2147483647) -- Original Type: DLCI
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The lower bound of DLCIs which are supported.
+        The value of zero is a valid value for the
+        minimum DLCI field of the label."
+    REFERENCE
+        "RFC3034, Use of Label Switching on Frame Relay
+        Networks Specification."
+    ::= { mplsLdpFrameRelaySessionEntry 1 }
+
+mplsLdpFrameRelaySessionMaxDlci OBJECT-TYPE
+    SYNTAX      INTEGER -- Original Type: DLCI 
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The upper bound of DLCIs which are supported."
+    ::= { mplsLdpFrameRelaySessionEntry 2 }
+
+mplsLdpFrameRelaySessionLen OBJECT-TYPE
+    SYNTAX      INTEGER {
+                    tenDlciBits(0),
+                    twentyThreeDlciBits(2)
+                }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "This object specifies the DLCI bits."
+    ::= { mplsLdpFrameRelaySessionEntry 3 }
+
+--****************************************************************
+-- Module Conformance Statement
+--****************************************************************
+
+mplsLdpFrameRelayGroups
+    OBJECT IDENTIFIER ::= { mplsLdpFrameRelayConformance 1 }
+
+mplsLdpFrameRelayCompliances
+    OBJECT IDENTIFIER ::= { mplsLdpFrameRelayConformance 2 }
+
+--
+-- Full Compliance
+--
+
+-- mplsLdpFrameRelayModuleFullCompliance MODULE-COMPLIANCE
+--     STATUS current
+--     DESCRIPTION
+--         "The Module is implemented with support for
+--         read-create and read-write.  In other words,
+--         both monitoring and configuration
+--         are available when using this MODULE-COMPLIANCE."
+--     MODULE  this module
+--         MANDATORY-GROUPS    {
+--                                mplsLdpFrameRelayGroup
+--                             }
+
+--     OBJECT       mplsLdpEntityFrameRelayRowStatus
+--     SYNTAX       RowStatus { active(1) }
+--     WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+--     DESCRIPTION
+--        "Support for createAndWait and notInService is not required."
+
+--     OBJECT       mplsLdpEntityFrameRelayLRRowStatus
+--     SYNTAX       RowStatus { active(1) }
+--     WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+--     DESCRIPTION
+--        "Support for createAndWait and notInService is not required."
+--     ::= { mplsLdpFrameRelayCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+mplsLdpFrameRelayModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-only.  In other words, only monitoring
+        is available by implementing this MODULE-COMPLIANCE."
+    MODULE
+-- this module
+        MANDATORY-GROUPS    {
+                               mplsLdpFrameRelayGroup
+                            }
+
+    OBJECT       mplsLdpEntityFrameRelayIfIndexOrZero
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayMergeCap
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayVcDirectionality
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    -- OBJECT       mplsLdpEntityFrameRelayRowStatus
+    -- SYNTAX       RowStatus { active(1) }
+    -- MIN-ACCESS   read-only
+    -- DESCRIPTION
+    --    "Write access is not required, and active is the
+    --    only status that needs to be supported."
+
+    OBJECT       mplsLdpEntityFrameRelayLRMaxDlci
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayLRLen
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityFrameRelayLRStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    -- OBJECT       mplsLdpEntityFrameRelayLRRowStatus
+    -- SYNTAX       RowStatus { active(1) }
+    -- MIN-ACCESS   read-only
+    -- DESCRIPTION
+    --    "Write access is not required, and active is the
+    --    only status that needs to be supported."
+    ::= { mplsLdpFrameRelayCompliances 2 }
+
+--
+-- units of conformance
+--
+
+mplsLdpFrameRelayGroup OBJECT-GROUP
+    OBJECTS {
+    mplsLdpEntityFrameRelayIfIndexOrZero,
+    mplsLdpEntityFrameRelayMergeCap,
+    mplsLdpEntityFrameRelayLRComponents,
+    mplsLdpEntityFrameRelayVcDirectionality,
+    mplsLdpEntityFrameRelayStorageType,
+    -- mplsLdpEntityFrameRelayRowStatus,
+    mplsLdpEntityFrameRelayLRMaxDlci,
+    mplsLdpEntityFrameRelayLRLen,
+    mplsLdpEntityFrameRelayLRStorageType,
+    -- mplsLdpEntityFrameRelayLRRowStatus,
+    mplsLdpFrameRelaySessionMaxDlci,
+    mplsLdpFrameRelaySessionLen
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to all MPLS LDP implementations
+        using Frame Relay as the Layer 2."
+    ::= { mplsLdpFrameRelayGroups 1 }
+
+mplsLdpGenericObjects
+         OBJECT IDENTIFIER ::= { mplsLdpStdMIB 8 }
+mplsLdpGenericConformance
+         OBJECT IDENTIFIER ::= { mplsLdpStdMIB 9 }
+
+--****************************************************************
+-- MPLS LDP GENERIC Objects
+--****************************************************************
+
+--
+-- Ldp Entity Objects for Generic Labels
+--
+
+mplsLdpEntityGenericObjects  OBJECT IDENTIFIER ::=
+                              { mplsLdpGenericObjects 1 }
+
+--
+-- The MPLS LDP Entity Generic Label Range Table
+--
+
+mplsLdpEntityGenericLRTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MplsLdpEntityGenericLREntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "The MPLS LDP Entity Generic Label Range (LR)
+        Table.
+
+        The purpose of this table is to provide a mechanism
+        for configurating a contiguous range of generic labels,
+        or a 'label range' for LDP Entities.
+
+        LDP Entities which use Generic Labels must have at least
+        one entry in this table.  In other words, this table
+        'extends' the mpldLdpEntityTable for Generic Labels."
+    ::= { mplsLdpEntityGenericObjects 1 }
+
+mplsLdpEntityGenericLREntry OBJECT-TYPE
+    SYNTAX MplsLdpEntityGenericLREntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+        "A row in the LDP Entity Generic Label
+        Range (LR) Table.  One entry in this table contains
+        information on a single range of labels
+        represented by the configured Upper and Lower
+        Bounds pairs.  NOTE: there is NO corresponding
+        LDP message which relates to the information
+        in this table, however, this table does provide
+        a way for a user to 'reserve' a generic label
+        range.
+
+        NOTE:  The ranges for a specific LDP Entity
+        are UNIQUE and non-overlapping.
+
+        A row will not be created unless a unique and
+        non-overlapping range is specified."
+    INDEX       {  prvtcrldpSigIndex,
+                   mplsLdpEntityLdpId,
+                   mplsLdpEntityIndex,
+                   mplsLdpEntityGenericLRMin,
+                   mplsLdpEntityGenericLRMax
+                }
+    ::= { mplsLdpEntityGenericLRTable 1 }
+
+MplsLdpEntityGenericLREntry ::= SEQUENCE {
+    mplsLdpEntityGenericLRMin           Unsigned32,
+    mplsLdpEntityGenericLRMax           Unsigned32,
+    mplsLdpEntityGenericLabelSpace      INTEGER,
+    mplsLdpEntityGenericIfIndexOrZero   InterfaceIndexOrZero,
+    mplsLdpEntityGenericLRStorageType   StorageType
+    -- mplsLdpEntityGenericLRRowStatus     RowStatus
+}
+
+mplsLdpEntityGenericLRMin OBJECT-TYPE
+    SYNTAX     Unsigned32(0..1048575)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The minimum label configured for this range."
+    ::= { mplsLdpEntityGenericLREntry 1 }
+
+mplsLdpEntityGenericLRMax OBJECT-TYPE
+    SYNTAX     Unsigned32(0..1048575)
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The maximum label configured for this range."
+    ::= { mplsLdpEntityGenericLREntry 2 }
+
+mplsLdpEntityGenericLabelSpace  OBJECT-TYPE
+    SYNTAX      INTEGER {
+                          perPlatform(1),
+                          perInterface(2)
+                         }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This value of this object is perPlatform(1), then
+       this means that the label space type is
+       per platform.
+
+       If this object is perInterface(2), then this
+       means that the label space type is per Interface."
+    REFERENCE
+        "RFC3036, LDP Specification, Section 2.2.1,
+        Label Spaces."
+    DEFVAL { perPlatform }
+    ::= { mplsLdpEntityGenericLREntry 3 }
+
+mplsLdpEntityGenericIfIndexOrZero OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+       "This value represents either the InterfaceIndex of
+       the 'ifLayer' where these Generic Label would be created,
+       or 0 (zero).  The value of zero means that the
+       InterfaceIndex is not known.
+
+       However, if the InterfaceIndex is known,
+       then it must be represented by this value.
+
+       If an InterfaceIndex becomes known, then the
+       network management entity (e.g., SNMP agent) responsible
+       for this object MUST change the value from 0 (zero) to the
+       value of the InterfaceIndex."
+    ::= { mplsLdpEntityGenericLREntry 4 }
+
+mplsLdpEntityGenericLRStorageType  OBJECT-TYPE
+    SYNTAX      StorageType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION
+        "The storage type for this conceptual row.
+        Conceptual rows having the value 'permanent(4)'
+        need not allow write-access to any columnar
+        objects in the row."
+    DEFVAL { nonVolatile }
+    ::= { mplsLdpEntityGenericLREntry 5 }
+
+-- mplsLdpEntityGenericLRRowStatus OBJECT-TYPE
+--     SYNTAX RowStatus
+--     MAX-ACCESS read-only
+--     STATUS current
+--     DESCRIPTION
+--         "The status of this conceptual row.  All writable
+--          objects in this row may be modified at any time,
+--          however, as described in  detail in the section
+--          entitled, 'Changing Values After Session
+--          Establishment', and again described in the
+--          DESCRIPTION clause of the mplsLdpEntityAdminStatus object,
+--          if a session has been initiated with a Peer,
+--          changing objects in this table will
+--          wreak havoc with the session and interrupt traffic.
+--          To repeat again:  the recommended procedure is
+--          to set the mplsLdpEntityAdminStatus to
+--          down, thereby explicitly causing a
+--          session to be torn down. Then, change objects
+--          in this entry, then set the mplsLdpEntityAdminStatus
+--          to enable which enables a new session to be initiated.
+
+--          There must exist at least one entry in this
+--          table for every LDP Entity that has a
+--          generic label configured."
+--     ::= { mplsLdpEntityGenericLREntry 6 }
+
+--****************************************************************
+-- Module Conformance Statement
+--****************************************************************
+
+mplsLdpGenericGroups
+    OBJECT IDENTIFIER ::= { mplsLdpGenericConformance 1 }
+
+mplsLdpGenericCompliances
+    OBJECT IDENTIFIER ::= { mplsLdpGenericConformance 2 }
+
+--
+-- Full Compliance
+--
+
+-- mplsLdpGenericModuleFullCompliance MODULE-COMPLIANCE
+--     STATUS current
+--     DESCRIPTION
+--         "The Module is implemented with support for
+--         read-create and read-write.  In other words,
+--         both monitoring and configuration
+--         are available when using this MODULE-COMPLIANCE."
+--     MODULE  this module
+--         MANDATORY-GROUPS    {
+--                                mplsLdpGenericGroup
+--                             }
+
+    -- OBJECT       mplsLdpEntityGenericLRRowStatus
+    -- SYNTAX       RowStatus { active(1) }
+    -- WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) }
+    -- DESCRIPTION
+    --    "Support for createAndWait and notInService is not required."
+
+    -- ::= { mplsLdpGenericCompliances 1 }
+
+--
+-- Read-Only Compliance
+--
+
+mplsLdpGenericModuleReadOnlyCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The Module is implemented with support for
+        read-only.  In other words, only monitoring
+        is available by implementing this MODULE-COMPLIANCE."
+    MODULE -- this module
+        MANDATORY-GROUPS    {
+                               mplsLdpGenericGroup
+                            }
+
+    OBJECT       mplsLdpEntityGenericLabelSpace
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityGenericIfIndexOrZero
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    OBJECT       mplsLdpEntityGenericLRStorageType
+    MIN-ACCESS   read-only
+    DESCRIPTION
+       "Write access is not required."
+
+    -- OBJECT       mplsLdpEntityGenericLRRowStatus
+    -- SYNTAX       RowStatus { active(1) }
+    -- MIN-ACCESS   read-only
+    -- DESCRIPTION
+    --    "Write access is not required, and active is the
+    --   only status that needs to be supported."
+
+    ::= { mplsLdpGenericCompliances 2 }
+
+--
+-- units of conformance
+--
+
+mplsLdpGenericGroup OBJECT-GROUP
+    OBJECTS {
+    mplsLdpEntityGenericLabelSpace,
+    mplsLdpEntityGenericIfIndexOrZero,
+    mplsLdpEntityGenericLRStorageType
+    -- mplsLdpEntityGenericLRRowStatus
+    }
+    STATUS    current
+    DESCRIPTION
+        "Objects that apply to all MPLS LDP implementations
+        using Generic Labels as the Layer 2."
+    ::= { mplsLdpGenericGroups 1 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-MPLS-TE-MIB b/MIBS/telco-systems/binos/PRVT-MPLS-TE-MIB
new file mode 100644
index 0000000..78d47af
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-MPLS-TE-MIB
@@ -0,0 +1,5234 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   PRVT-MPLS-TE-MIB.mib
+-- ** Project:    T-Metro Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-MPLS-TE-MIB DEFINITIONS ::= BEGIN
+-- PRODUCT-SHORT-NAME MPLS
+
+IMPORTS
+   MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
+   Integer32, Unsigned32, Counter32, zeroDotZero,
+   Counter64, TimeTicks
+      FROM SNMPv2-SMI
+      
+           NOTIFICATION-TYPE, transmission
+          FROM SNMPv2-SMI                    -- [RFC2578]
+
+   MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+      FROM SNMPv2-CONF
+
+   TEXTUAL-CONVENTION, TruthValue, RowStatus, RowPointer,
+   StorageType, DisplayString, TimeStamp
+      FROM SNMPv2-TC
+
+   InterfaceIndexOrZero
+      FROM IF-MIB
+
+   MplsBitRate, MplsBurstSize, MplsLSPID,
+   MplsTunnelIndex, MplsTunnelInstanceIndex,
+   MplsTunnelAffinity, MplsExtendedTunnelId, MplsPathIndex,
+   MplsPathIndexOrZero, MplsOwner, TeHopAddressType,
+   TeHopAddress, TeHopAddressAS, TeHopAddressUnnum
+      FROM MPLS-TC-PRIV-STDEXT-MIB                               -- [RFC3811]
+
+   InetAddressPrefixLength, InetAddressType, InetAddress, InetAddressIPv4
+      FROM INET-ADDRESS-MIB                              -- [RFC3291]
+
+   prvtMplsTeMibEntityIndex
+      FROM PRVT-TEMIB-ENTITY-MIB 
+      
+   mpls 				 		FROM PRVT-CR-LDP-MIB;
+
+mplsTeMIB MODULE-IDENTITY
+      LAST-UPDATED "200902170000Z" 
+      ORGANIZATION "BATM Advanced Communication"
+      CONTACT-INFO
+                   " BATM/Telco Systems Support team
+					Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+   DESCRIPTION
+        "This MIB module contains managed object definitions
+          for MPLS Traffic Engineering (TE) as defined in:
+          Extensions to RSVP for LSP Tunnels, Awduche et al,
+          Internet Draft <draft-ietf-mpls-rsvp-lsp-tunnel-
+          07.txt>, August 2000; Constraint-Based LSP Setup
+          using LDP, B. Jamoussi, Internet Draft <draft-ietf-
+          mpls-cr-ldp-04.txt>, July 2000; Requirements for
+          Traffic Engineering Over MPLS, Awduche, D., J.
+          Malcolm, J., Agogbua, J., O'Dell, M., J. McManus,
+          <rfc2702.txt>, September 1999."
+
+
+   -- Revision history.  
+   REVISION "200902170000Z"
+   DESCRIPTION
+        "Removed references to undefined OBJECT-GROUPs."
+   REVISION     "200811200000Z"
+    DESCRIPTION
+        "Added additional timer (mplsTunnelMBBTimeOut) in the tunnel mib."
+   REVISION     "200808280000Z"
+    DESCRIPTION
+        "mplsTunnelReoptimized notification updates." 
+    REVISION     "200803030000Z"
+    DESCRIPTION
+        "mplsTunnelRebuildTimer updates." 
+    REVISION     "200712060000Z"
+    DESCRIPTION
+        "Minor TC updates."
+  
+    REVISION     "200712020959Z"
+    DESCRIPTION
+        "The attribute for guarded destination has IPv4 TC."
+
+  
+    
+
+
+   ::= { mpls 2 }
+
+
+-- Textual Conventions.
+
+MplsTunnelIndexSyntax ::= TEXTUAL-CONVENTION
+   STATUS        current
+   DESCRIPTION
+        "Index into mplsTunnelTable."
+   SYNTAX        Integer32 (0..65535)
+
+MplsLsrId ::= TEXTUAL-CONVENTION
+   STATUS        current
+   DESCRIPTION
+        "A unique identifier for an MPLS LSR. This MAY
+          represent an IpV4 address."
+   SYNTAX   Unsigned32
+
+MplsGeneralizedLabelType ::= TEXTUAL-CONVENTION
+   STATUS      current
+   DESCRIPTION
+       "The  label  types that are defined  for  Generalized
+        MPLS."
+   SYNTAX     INTEGER {
+                  mplsLabel(1),
+                  generalizedLabel(2),
+                  wavebandLabel(3)
+              }
+-- Addition
+
+MplsTunnelPrivateDataSyntax ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+       "Represents private data field."
+    SYNTAX       OCTET STRING (SIZE (0..8))
+
+MplsTunnelTNAAddress ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+      "TNA address of a tunnel."
+    SYNTAX       OCTET STRING (SIZE (0..20))
+
+MplsGeneralizedLabel ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255x"
+    STATUS      current
+    DESCRIPTION
+        "This value represents a generalized MPLS Label.
+        The label contents are specific to the label being
+        represented.
+
+        Wherever an MplsGeneralizedLabel is copied to or from
+        a signaling protocol message, it is copied byte for
+        byte as is.  Therefore, if the octet string is
+        intended to represent multibyte values, it encodes
+        those values in network (big-endian) byte order.
+        This interpretation applies in particular to the
+        non-generalized MPLS labels (32 bits) used in ATM, FR
+        and generic MPLS networks."
+    SYNTAX      OCTET STRING (SIZE (0..255))
+-- End Addition
+
+-- Top level components of this MIB.
+
+-- tables, scalars
+mplsTeObjects       OBJECT IDENTIFIER ::= { mplsTeMIB 1 }
+
+-- traps
+mplsTeNotifications OBJECT IDENTIFIER ::= { mplsTeMIB 2 }
+mplsTeNotifyPrefix  OBJECT IDENTIFIER ::= { mplsTeNotifications 0 }
+
+-- conformance
+mplsTeConformance   OBJECT IDENTIFIER ::= { mplsTeMIB 3 }
+
+-- MPLS tunnel table.
+
+-- Addition
+mplsTunnelIndexNextTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_TNI
+   SYNTAX        SEQUENCE OF MplsTunnelIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next available values of
+        mplsTunnelIndex for all entities."
+   ::= { mplsTeObjects 1 }
+
+mplsTunnelIndexNextEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        mplsTunnelIndex for a specific TE-MIB entity.
+        This MIB table is indexed by the PRVT-TE-MIB entity Index."
+
+   INDEX  { prvtMplsTeMibEntityIndex }
+      ::= { mplsTunnelIndexNextTable 1 }
+
+MplsTunnelIndexNextEntry ::= SEQUENCE {
+      mplsTunnelIndexNextIndex           Integer32
+    }
+-- End Addition
+
+mplsTunnelIndexNextIndex OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next appropriate value
+        to be used for mplsTunnelIndex when creating
+        entries in the mplsTunnelTable. If the number of
+        unassigned entries is exhausted, this object
+        will take on the value of 0.  To obtain the
+        mplsTunnelIndex value for a new entry, the
+        manager must first issue a management protocol
+        retrieval operation to obtain the current value
+        of this object. The agent should modify the
+        value to reflect the next unassigned index after
+        each retrieval operation. After a manager
+        retrieves a value the agent will determine
+        through its local policy when this index value
+        will be made available for reuse."
+::= { mplsTunnelIndexNextEntry 1 }
+
+
+mplsTunnelTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_TNNL
+   SYNTAX        SEQUENCE OF MplsTunnelEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelTable allows new MPLS tunnels to be
+          created between an LSR and a remote endpoint, and
+          existing tunnels to be reconfigured or removed.
+          Note that only point-to-point tunnel segments are
+          supported, although multi-point-to-point and point-
+          to-multi-point connections are supported by an LSR
+          acting as a cross-connect.  Each MPLS tunnel can
+          thus have one out-segment originating at this LSR
+          and/or one in-segment terminating at this LSR.
+
+          To configure tunnels where the ingress and egress routers
+          are identified by IPv6 addresses, the following approach is
+          used.
+
+          - The mplsTunnelIngressLSRId and mplsTunnelEgressLSRId
+            fields are set to 32-bit identifiers for the ingress and
+            egress routers.
+
+          - mplsTunnelHopTableIndex must be set to a non-zero value.
+
+          - The first hop in the hop table for the tunnel path must be
+            set to a global scope IPv6 address of the local router.
+
+          - The last entry in the hop table must be set to a global
+            scope IPv6 address of the egress router."
+   ::= { mplsTeObjects 2 }
+
+mplsTunnelEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents an MPLS tunnel.
+          An entry can be created by a network administrator
+          or by an SNMP agent as instructed by an MPLS
+          signaling protocol. Whenever a new entry is created
+          with mplsTunnelIsIf set to true(1), then a
+          corresponding entry is created in ifTable as well
+          (see RFC 2233). The ifType of this entry is
+          mplsTunnel(150)."
+   INDEX  { prvtMplsTeMibEntityIndex,
+            mplsTunnelIndex, mplsTunnelInstance,
+            mplsTunnelIngressLSRId, mplsTunnelEgressLSRId }
+      ::= { mplsTunnelTable 1 }
+
+
+MplsTunnelEntry ::= SEQUENCE {
+      mplsTunnelIndex                   MplsTunnelIndexSyntax,
+      mplsTunnelInstance                MplsTunnelInstanceIndex,
+      mplsTunnelIngressLSRId            MplsExtendedTunnelId,
+      mplsTunnelEgressLSRId             MplsExtendedTunnelId,
+      mplsTunnelName                    DisplayString,
+      mplsTunnelDescr                   DisplayString,
+      mplsTunnelIsIf                    TruthValue,
+      mplsTunnelIfIndex                 InterfaceIndexOrZero,
+      mplsTunnelOwner                   MplsOwner,
+      mplsTunnelRole                    INTEGER,
+      mplsTunnelXCPointer               RowPointer,
+      mplsTunnelSignallingProto         INTEGER,
+      mplsTunnelSetupPrio               Integer32,
+      mplsTunnelHoldingPrio             Integer32,
+      mplsTunnelSessionAttributes       BITS,
+      mplsTunnelLocalProtectInUse       TruthValue,
+      mplsTunnelResourcePointer         RowPointer,
+      mplsTunnelPrimaryInstance         MplsTunnelInstanceIndex,
+      mplsTunnelInstancePriority        Unsigned32,
+      mplsTunnelHopTableIndex           MplsPathIndexOrZero,
+      mplsTunnelPathInUse               MplsPathIndexOrZero,
+      mplsTunnelARHopTableIndex         MplsPathIndexOrZero,
+      mplsTunnelCHopTableIndex          MplsPathIndexOrZero,
+      mplsTunnelIncludeAnyAffinity      MplsTunnelAffinity,
+      mplsTunnelIncludeAllAffinity      MplsTunnelAffinity,
+      mplsTunnelExcludeAnyAffinity      MplsTunnelAffinity,
+      mplsTunnelTotalUpTime             TimeTicks,
+      mplsTunnelInstanceUpTime          TimeTicks,
+      mplsTunnelPrimaryUpTime           TimeTicks,
+      mplsTunnelPathChanges             Counter32,
+      mplsTunnelLastPathChange          TimeTicks,
+      mplsTunnelCreationTime            TimeStamp,
+      mplsTunnelStateTransitions        Counter32,
+      mplsTunnelAdminStatus             INTEGER,
+      mplsTunnelOperStatus              INTEGER,
+      mplsTunnelRowStatus               RowStatus,
+      mplsTunnelStorageType             StorageType,
+-- Addition
+      mplsTunnelUnnumIf                 TruthValue,
+      mplsTunnelAttributes              BITS,
+      mplsTunnelLSPEncoding             INTEGER,
+      mplsTunnelSwitchingType           Unsigned32,
+      mplsTunnelLinkProtection          BITS,
+      mplsTunnelGPid                    INTEGER,
+      mplsTunnelSecondary               TruthValue,
+      mplsTunnelDirection               INTEGER,
+      mplsTunnelPathComp                INTEGER,
+      mplsTunnelUpNotRecipType          InetAddressType,
+      mplsTunnelUpNotRecip              InetAddress,
+      mplsTunnelDownNotRecipType        InetAddressType,
+      mplsTunnelDownNotRecip            InetAddress,
+      mplsTunnelAdminStatusFlags        BITS,
+      mplsTunnelExtraParamsPtr          RowPointer,
+      mplsTunnelUseEgressLabel          TruthValue,
+      mplsTunnelEgressLabel             MplsGeneralizedLabel,
+      mplsTunnelEgressLabelType         MplsGeneralizedLabelType,
+      mplsTunnelOmitEROIfOneHop         TruthValue,
+      mplsTunnelPrivateData             MplsTunnelPrivateDataSyntax,
+      mplsTunnelSrcTNAAddressType       INTEGER,
+      mplsTunnelSrcTNAAddress           MplsTunnelTNAAddress,
+      mplsTunnelDestTNAAddressType      INTEGER,
+      mplsTunnelDestTNAAddress          MplsTunnelTNAAddress,
+      mplsTunnelEndToEndRerouting       TruthValue,
+      mplsTunnelIsUni                   TruthValue,
+      mplsTunnelUniServiceLevel         Integer32,
+      mplsTunnelUniEgressLabel          MplsGeneralizedLabel,
+      mplsTunnelUniEgressLabelType      MplsGeneralizedLabelType,
+      mplsTunnelUniEgressLabelPort      Unsigned32,
+      mplsTunnelUniRvsEgressLabel       MplsGeneralizedLabel,
+      mplsTunnelUniRvsEgressLabelType   MplsGeneralizedLabelType,
+      mplsTunnelUniRvsEgressLabelPort   Unsigned32,
+      mplsTunnelDeletionMode            INTEGER,
+      mplsTunnelUniDiversityListIndex   Integer32,
+      mplsTunnelDiffServIndex           Integer32,
+      mplsTunnelReversePrivateData      MplsTunnelPrivateDataSyntax,
+      mplsTunnelFastRerouteMode         INTEGER,
+      mplsTunnelBackupSetupPrio         Integer32,
+      mplsTunnelBackupHoldingPriority   Integer32,
+      mplsTunnelBackupIncAny            MplsTunnelAffinity,
+      mplsTunnelBackupIncAll            MplsTunnelAffinity,
+      mplsTunnelBackupExcAny            MplsTunnelAffinity,
+      mplsTunnelBackupBandwidth         MplsBitRate,
+      mplsTunnelBackupMaxHops           Unsigned32,
+      mplsTunnelIsSpc                   TruthValue,
+      mplsTunnelUniIngressLabel         MplsGeneralizedLabel,
+      mplsTunnelUniIngressLabelType     MplsGeneralizedLabelType,
+      mplsTunnelUniIngressLabelPort     Unsigned32,
+      mplsTunnelUniRvsIngrLabel         MplsGeneralizedLabel,
+      mplsTunnelUniRvsIngrLabelType     MplsGeneralizedLabelType,
+      mplsTunnelUniRvsIngrLabelPort     Unsigned32,
+      mplsTunnelDiffServClassType       Integer32,
+      mplsTunnelExtendedProtection      TruthValue,
+      mplsTunnelProtecting              TruthValue,
+      mplsTunnelNotification            TruthValue,
+      mplsTunnelLspProtection           Unsigned32,
+      mplsTunnelAssociatedLspId         MplsTunnelInstanceIndex,
+      mplsTunnelCallIdType              INTEGER,
+      mplsTunnelCallId                  OCTET STRING,
+      mplsTunnelIsIpv6                  TruthValue,
+      mplsTunnelMtu                     Integer32,
+      mplsTunnelRebuildTimer            TimeTicks,
+      mplsTunnelOperStatusFlags	        BITS,
+      mplsTunnelGuardedDest             InetAddressIPv4,
+      mplsTunnelMBBTimeOut              Integer32
+-- End Addition
+   }
+
+mplsTunnelIndex OBJECT-TYPE
+   SYNTAX        MplsTunnelIndexSyntax
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Uniquely identifies this row."
+   ::= { mplsTunnelEntry 1 }
+
+mplsTunnelInstance OBJECT-TYPE
+   SYNTAX        MplsTunnelInstanceIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Uniquely identifies an instance of a tunnel. It is
+          useful to identify multiple instances of tunnels
+          for the purposes of backup and parallel tunnels."
+   ::= { mplsTunnelEntry 2 }
+
+mplsTunnelIngressLSRId OBJECT-TYPE
+   SYNTAX        MplsExtendedTunnelId
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Identity of the ingress LSR associated with this
+          tunnel instance. When the MPLS signalling protocol
+          is rsvp(2) this value SHOULD be equal to the Tunnel
+          Sender Address in the Sender Template object and MAY
+          be equal to the Extended Tunnel Id field in the
+          SESSION object. When the MPLS signalling protocol is
+          crldp(3) this value SHOULD be equal to the Ingress
+          LSR Router ID field in the LSPID TLV object."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+          (Editor), RFC 3212, January 2002"
+   ::= { mplsTunnelEntry 3 }
+
+mplsTunnelEgressLSRId OBJECT-TYPE
+   SYNTAX        MplsExtendedTunnelId
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Identity of the egress LSR associated with this
+          tunnel instance."
+   ::= { mplsTunnelEntry 4 }
+
+mplsTunnelName OBJECT-TYPE
+   SYNTAX        DisplayString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The canonical name assigned to the tunnel. This name
+          can be used to refer to the tunnel on the LSRs
+          console port.  If mplsTunnelIsIf is set to true
+          then the ifName of the interface corresponding to
+          this tunnel should have a value equal to
+          mplsTunnelName.  Also see the description of ifName
+          in RFC 2863."
+   REFERENCE
+        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+          and F. Kastenholtz, June 2000"
+   ::= { mplsTunnelEntry 5 }
+
+mplsTunnelDescr OBJECT-TYPE
+   SYNTAX        DisplayString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "A textual string containing information about the
+          tunnel.  If there is no description this object
+          contains a zero length string. This object is may
+          not be signaled by MPLS signaling protocols,
+          consequentally the value of this object at transit
+          and egress LSRs MAY be automatically generated or
+          absent."
+   ::= { mplsTunnelEntry 6 }
+
+mplsTunnelIsIf OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Denotes whether or not this tunnel corresponds to an
+          interface represented in the interfaces group
+          table. Note that if this variable is set to true
+          then the ifName of the interface corresponding to
+          this tunnel should have a value equal to
+          mplsTunnelName.  Also see the description of ifName
+          in RFC 2233."
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 7 }
+
+mplsTunnelIfIndex OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+-- Addition
+-- MAX-ACCESS    read-only
+   MAX-ACCESS    read-create
+-- End Addition
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelIsIf is set to true, then this value
+          contains the LSR-assigned ifIndex which corresponds
+          to an entry in the interfaces table.  Otherwise
+          this variable should contain the value of zero
+          indicating that a valid ifIndex was not assigned to
+          this tunnel interface."
+   REFERENCE
+        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+          and F. Kastenholtz, June 2000"
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 8 }
+
+mplsTunnelOwner OBJECT-TYPE
+   SYNTAX        MplsOwner
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Denotes the entity that created and is responsible
+          for managing this tunnel. This column is
+          automatically filled by the agent on creation of a
+          row."
+   ::= { mplsTunnelEntry 9 }
+
+mplsTunnelRole OBJECT-TYPE
+   SYNTAX        INTEGER { head(1),
+                           transit(2),
+                           tail(3),
+                           headTail(4) }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This value signifies the role that this tunnel
+          entry/instance represents. This value MUST be set
+          to head(1) at the originating point of the tunnel.
+          This value MUST be set to transit(2) at transit
+          points along the tunnel, if transit points are
+          supported. This value MUST be set to tail(3) at the
+          terminating point of the tunnel if tunnel tails are
+          supported.
+
+         The value headTail(4) is provided for tunnels that
+          begin and end on the same LSR."
+   DEFVAL        { head }
+      ::= { mplsTunnelEntry 10 }
+
+mplsTunnelXCPointer OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable points to a row in the mplsXCTable.
+          This table identifies the segments that compose
+          this tunnel, their characteristics, and
+          relationships to each other. A value of zeroDotZero
+          indicates that no LSP has been associated with this
+          tunnel yet.
+
+          The array of longs specified here is configured as
+          the OID array for the lmgr entity cross connect row.
+          This consists of the length, family, lmgr entity
+          index and row index values.  Only the
+          AMB_MPLS_XC_INDEX_IDX index is referenced by the
+          TE-MIB."
+   REFERENCE
+        "Srinivasan, C., Viswanathan, A., and T. Nadeau,
+          Multiprotocol Label Switching (MPLS) Label Switching
+          Router (LSR) Management Information Base (MIB), RFC 3813,
+          June 2004"
+   DEFVAL        { zeroDotZero }
+   ::= { mplsTunnelEntry 11 }
+
+mplsTunnelSignallingProto OBJECT-TYPE
+   SYNTAX       INTEGER {
+                     none(1),
+                     rsvp(2),
+                     crldp(3),
+                     other(4)
+                     }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The signalling protocol, if any, used to setup this
+          tunnel."
+   DEFVAL        { none }
+   ::= { mplsTunnelEntry 12 }
+
+mplsTunnelSetupPrio OBJECT-TYPE
+   SYNTAX        Integer32 (0..7)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates the setup priority of this tunnel."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+          (Editor), RFC 3212, January 2002"
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 13 }
+
+mplsTunnelHoldingPrio OBJECT-TYPE
+   SYNTAX        Integer32 (0..7)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates the holding priority for this tunnel."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001
+
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+          (Editor), RFC 3212, January 2002"
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 14 }
+
+mplsTunnelSessionAttributes OBJECT-TYPE
+   SYNTAX      BITS {
+                  fastReroute (0),
+                  mergingPermitted (1),
+                  isPersistent (2),
+                  isPinned (3),
+                  recordRoute(4),
+-- Addition
+                  reserved5(5),
+                  bandwidthProtect(6),
+                  nodeProtect(7)
+-- End Addition
+                 }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+         "This bitmask indicates optional session values for
+          this tunnel. The following describes these bit
+          fields:
+
+         fastReroute This flag indicates that any tunnel
+          hop may choose to reroute this tunnel without
+          tearing it down.  This flag permits transit routers
+          to use a local repair mechanism which may result in
+          violation of the explicit routing of this tunnel.
+          When a fault is detected on an adjacent downstream
+          link or node, a transit router can reroute traffic
+          for fast service restoration.
+
+         mergingPermitted This flag permits transit routers
+          to merge this session with other RSVP sessions for
+          the purpose of reducing resource overhead on
+          downstream transit routers, thereby providing
+          better network scalability.
+
+        isPersistent  Indicates whether this tunnel should
+          be restored automatically after a failure occurs.
+
+        isPinned   This flag indicates whether the loose-
+          routed hops of this tunnel are to be pinned.
+
+        recordRoute This flag indicates if the
+          signaling protocol should remember the tunnel path
+          after it has been signaled.
+
+--        recordLabels This flag indicates if the
+--          signaling protocol should record labels as well as
+--          the tunnel path.
+
+        bandwidthProtect This flag indicates whether fast reroute
+          bandwidth protection is desired.
+
+        nodeProtect This flag indicates whether fast reroute
+          node protection is desired."
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001."
+   DEFVAL        { {} }
+   ::= { mplsTunnelEntry 15 }
+
+mplsTunnelLocalProtectInUse  OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates that the local repair mechanism is in use
+          to maintain this tunnel (usually in the face of an
+          outage of the link it was previously routed over)."
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 16 }
+
+mplsTunnelResourcePointer OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable represents a pointer to the traffic
+          parameter specification for this tunnel.  This
+          value may point at an entry in the
+          mplsTunnelResourceEntry to indicate which
+          mplsTunnelResourceEntry is to be assigned to this
+          LSP instance.  This value may optionally point at
+          an externally defined traffic parameter
+          specification table.  A value of zeroDotZero
+          indicates best-effort treatment.  By having the
+          same value of this object, two or more LSPs can
+          indicate resource sharing.
+
+          In this implementation of the mplsTunnelTable, the row must either
+          be set to zeroDotZero, or must point at an entry in the
+          mplsTunnelResourceTable.
+
+          If a value other than zeroDotZero is used, then
+          mplsTunnelExtraParamsPtr must be set to zeroDotZero."
+   ::= { mplsTunnelEntry 17 }
+
+mplsTunnelPrimaryInstance OBJECT-TYPE
+   SYNTAX         MplsTunnelInstanceIndex
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the instance index of the primary instance
+          of this tunnel."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 18 }
+
+mplsTunnelInstancePriority OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This value indicates which priority, in descending
+          order, with 0 indicating the lowest priority,
+          within a group of tunnel instances.  A group of
+          tunnel instances is defined as a set of LSPs with
+          the same mplsTunnelIndex in this table, but with a
+          different mplsTunnelInstance. Tunnel instance
+          priorities are used to denote the priority at which
+          a particular tunnel instance will supercede
+          another.  Instances of tunnels containing the same
+          mplsTunnelInstancePriority will be used for load
+          sharing."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 19 }
+
+mplsTunnelHopTableIndex OBJECT-TYPE
+   SYNTAX         MplsPathIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Index into the mplsTunnelHopTable entry that
+          specifies the explicit route hops for this tunnel.
+          This object is meaningful only at the head-end of
+          the tunnel.
+
+          For UNI tunnels, this field should be set to 0.
+
+          For tunnels with no configured explicit route hops, this
+          field should be set to 0.  In this case, the tunnel is
+          routed using mplsTunnelEgressLSRId."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 20 }
+
+mplsTunnelPathInUse OBJECT-TYPE
+   SYNTAX        MplsPathIndexOrZero
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This value denotes the configured path that was
+          chosen for this tunnel. This value reflects the
+          secondary index into mplsTunnelHopTable. This path
+          may not exactly match the one in
+          mplsTunnelARHopTable due to the fact that some CSPF
+          modification may have taken place. See
+          mplsTunnelARHopTable for the actual path being
+          taken by the tunnel. A value of zero denotes that
+          no path is currently in use or available.
+
+          For UNI tunnels, this field should be set to 0.
+
+          For tunnels with no configued explicit route hops,
+          this field should be set to 0."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 21 }
+
+mplsTunnelARHopTableIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndexOrZero
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Index into the mplsTunnelARHopTable entry that
+          specifies the actual hops traversed by the tunnel.
+          This is automatically updated by the agent when the
+          actual hops becomes available."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 22 }
+
+mplsTunnelCHopTableIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndexOrZero
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Index into the mplsTunnelCHopTable entry that
+          specifies the computed hops traversed by the
+          tunnel. This is automatically updated by the agent
+          when computed hops become available or when
+          computed hops get modified."
+   DEFVAL { 0 }
+   ::= { mplsTunnelEntry 23 }
+
+mplsTunnelIncludeAnyAffinity OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "A link satisfies the include-any constraint if and
+          only if the constraint is zero, or the link and the
+          constraint have a resource class in common.
+          
+          The field is a bitmask. Every request does not overwrite 
+          the previous one. 0 value resets the field.
+        "
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 24 }
+
+mplsTunnelIncludeAllAffinity OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "A link satisfies the include-all constraint if and
+          only if the link contains all of the administrative
+          groups specified in the constraint.
+          
+          The field is a bitmask. Every request does not overwrite 
+          the previous one. 0 value resets the field.
+        "
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 25 }
+
+mplsTunnelExcludeAnyAffinity OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "A link satisfies the exclude-any constraint if and
+          only if the link contains none of the
+          administrative groups specified in the constraint.
+          
+          The field is a bitmask. Every request does not overwrite 
+          the previous one. 0 value resets the field.
+        "
+   REFERENCE
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+          Awduche et al, RFC 3209, December 2001."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 26 }
+
+mplsTunnelTotalUpTime OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This value represents the aggregate up time for all
+          instances of this tunnel, if available. If this
+          value is unavailable, it MUST return a value of 0."
+   DEFVAL        { 0 }
+      ::= { mplsTunnelEntry 27 }
+
+mplsTunnelInstanceUpTime OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This value identifies the total time that this
+          tunnel instance's operStatus has been Up(1)."
+   DEFVAL        { 0 }
+      ::= { mplsTunnelEntry 28 }
+
+mplsTunnelPrimaryUpTime OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the total time the primary instance of
+          this tunnel has been active. The primary instance
+          of this tunnel is defined in
+          mplsTunnelPrimaryInstance."
+   ::= { mplsTunnelEntry 29 }
+
+mplsTunnelPathChanges OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the number of times the actual path for
+         this tunnel instance has changed."
+   ::= { mplsTunnelEntry 30 }
+
+mplsTunnelLastPathChange OBJECT-TYPE
+   SYNTAX        TimeTicks
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the time since the last change to the
+         actual path for this tunnel instance."
+   ::= { mplsTunnelEntry 31 }
+
+mplsTunnelCreationTime OBJECT-TYPE
+   SYNTAX        TimeStamp
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the value of SysUpTime when the first
+          instance of this tunnel came into existence.
+          That is, when the value of mplsTunnelOperStatus
+          was first set to up(1)."
+   ::= { mplsTunnelEntry 32 }
+
+mplsTunnelStateTransitions OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Specifies the number of times the state
+          (mplsTunnelOperStatus) of this tunnel instance has
+          changed."
+   ::= { mplsTunnelEntry 33 }
+
+mplsTunnelAdminStatus OBJECT-TYPE
+   SYNTAX     INTEGER {
+                   -- ready to pass packets
+                   up(1),
+                   down(2),
+                   -- in some test mode
+                   testing(3)
+             }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates the desired operational status of this
+          tunnel."
+   ::= { mplsTunnelEntry 34 }
+
+mplsTunnelOperStatus OBJECT-TYPE
+   SYNTAX     INTEGER {
+               -- ready to pass packets
+               up(1),
+               down(2),
+               -- in some test mode
+               testing(3),
+               -- status cannot be determined
+               unknown(4),
+               dormant(5),
+               -- some component is missing
+               notPresent(6),
+               -- down due to the state of
+               -- lower layer interfaces
+               lowerLayerDown(7)
+             }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Indicates the actual operational status of this
+          tunnel, which is typically but not limited to, a
+          function of the state of individual segments of
+          this tunnel."
+   ::= { mplsTunnelEntry 35 }
+
+mplsTunnelRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table.  When a row in this
+          table is in active(1) state, no objects in that row
+          can be modified by the agent except
+          mplsTunnelAdminStatus, mplsTunnelRowStatus and
+          mplsTunnelStorageType."
+   ::= { mplsTunnelEntry 36 }
+
+mplsTunnelStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION  "The storage type for this tunnel entry.
+                 Conceptual rows having the value 'permanent'
+                 need not allow write-access to any columnar
+                 objects in the row."
+   DEFVAL        { volatile }
+   ::= { mplsTunnelEntry 37 }
+
+-- Addition
+mplsTunnelUnnumIf OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "Denotes whether or not this tunnel corresponds to an unnumbered
+      interface represented in the interfaces group table.
+
+      This object is only used if mplsTunnelIsIf is set to 'true'.
+
+      If both this object and the mplsTunnelIsIf object are set to
+      'true', the originating LSR adds an LSP_TUNNEL_INTERFACE_ID
+      object to the outgoing Path message.
+
+      This object contains information that is only used by the
+      terminating LSR."
+   REFERENCE
+     "Signalling Unnumbered Links in RSVP-TE, Kompella, K.
+      and Rekhter, Y., RFC 3477, January 2003."
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 38 }
+
+   mplsTunnelAttributes OBJECT-TYPE
+     SYNTAX BITS {
+       reserved0(0),
+       reserved1(1),
+       reserved2(2),
+       reserved3(3),
+       reserved4(4),
+       labelRecordingDesired (5)
+     }
+     MAX-ACCESS read-create
+     STATUS  current
+     DESCRIPTION
+       "This bitmask indicates optional parameters for this tunnel.
+        These bits should be taken in addition to those defined in
+        mplsTunnelSessionAttributes in order to determine the full set
+        of options to be signaled (for example SESSION_ATTRIBUTES flags
+        in RSVP-TE). The following describes these bitfields:
+
+        labelRecordingDesired
+          This flag indicates that label information should be included
+          when doing a route record. This bit is not valid unless the
+          recordRoute bit is set in the mplsTunnelSessionAttributes object."
+     REFERENCE
+       "RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al.,
+        RFC 3209, December 2001."
+     DEFVAL  { { } }
+   ::= { mplsTunnelEntry 39 }
+
+mplsTunnelLSPEncoding OBJECT-TYPE
+   SYNTAX        INTEGER {
+        notInUse (0),
+        tunnelLspPacket (1),
+        tunnelLspEthernet (2),
+        tunnelLspAnsiEtsiPdh (3),
+        tunnelLspSdhSonet (5),
+        tunnelLspDigitalWrapper (7),
+        tunnelLspLambda (8),
+        tunnelLspFiber (9),
+        tunnelLspFiberChannel (11)
+   }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This object indicates the encoding of the LSP being requested.
+         It is only required when a generalized label request will be used
+         for this LSP.   A value of 0 in this object indicates that a
+         generalized label request will not be used to set up this LSP.
+
+         If this object indicates Sonet / SDH LSP encoding, then
+         the choice of QOS to use is controlled by the
+         mplsTunnelResourcePointer object.  If
+         mplsTunnelResourcePointer is 0.0, then a Sonet/SDH QOS
+         format is used, else an Intserv QOS is used."
+   DEFVAL        { notInUse }
+   ::= { mplsTunnelEntry 40 }
+
+mplsTunnelSwitchingType OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+     "Indicates the type of switching that should be performed on
+      a particular link. This field is needed for links that
+                 advertise more than one type of switching capability.
+                 Values of this field are as in the Switching Capability
+                 field defined in rfc3471.
+
+                 It is only used when mplsTunnelLSPEncoding is non-zero."
+
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 41 }
+
+mplsTunnelLinkProtection OBJECT-TYPE
+   SYNTAX      BITS {
+          extraTraffic(0),
+          unprotected (1),
+          shared (2),
+          dedicatedOneToOne (3),
+          dedicatedOnePlusOne (4),
+          enhanced (5)
+      }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "This bitmask indicates the level of link protection required. A
+      value of zero (no bits set) indicates that any protection may be
+      used. The following describes these bitfields:
+
+      extraTraffic
+        Indicates that the LSP should use links that are protecting
+        other (primary) traffic. Such LSPs may be preempted when the
+        links carrying the (primary) traffic being protected fail.
+
+      unprotected
+        Indicates that the LSP should not use any link layer
+        protection.
+
+      shared
+        Indicates that a shared link layer protection scheme, such as
+        1:N protection, should be used to support the LSP.
+
+      dedicatedOneToOne
+        Indicates that a dedicated link layer protection scheme,
+        i.e., 1:1 protection, should be used to support the LSP.
+
+      dedicatedOnePlusOne
+        Indicates that a dedicated link layer protection scheme,
+        i.e., 1+1 protection, should be used to support the LSP.
+
+      enhanced
+        Indicates that a protection scheme that is more reliable than
+        Dedicated 1+1 should be used, e.g., 4 fiber BLSR/MS-SPRING.
+
+      This object is only meaningful if mplsTunnelLSPEncoding is
+      not set to 'tunnelLspNotGmpls'."
+   REFERENCE
+      "Berger, L., et al., Generalized Multi-Protocol
+       Label Switching (GMPLS) Signaling Functional
+       Description, RFC 3471, January 2003."
+   DEFVAL { {} }
+   ::= { mplsTunnelEntry 42 }
+
+mplsTunnelGPid OBJECT-TYPE
+   SYNTAX        INTEGER {
+        unknown (0),
+        ds1SF (1),
+        ds1ESF (2),
+        ds3M23 (3),
+        ds3Cbit (4),
+        asyncE4 (5),
+        asyncDS3 (6),
+        asyncE3 (7),
+        bitSyncE3 (8),
+        byteSyncE3 (9),
+        asyncDS2 (10),
+        bitSyncDS2 (11),
+        byteSyncDS2 (12),
+        asyncE1 (13),
+        byteSyncE1 (14),
+        byteSync31DS0 (15),
+        asyncDS1 (16),
+        bitSyncDS1 (17),
+        byteSyncDS1 (18),
+        vcByteSyncDS2 (19),
+        vcAsyncE1 (20),
+        vcByteSyncE1 (21),
+        ds1SFAsync (22),
+        ds1ESFAsync (23),
+        ds3M23Async (24),
+        ds3CbitAsync (25),
+        vt (26),
+        sts (27),
+        pos16CRC (28),
+        pos32CRC (29),
+        posScrambling16CRC (30),
+        posScrambling32CRC (31),
+        atmMapping (32),
+        ethernet (33),
+        sdh (34),
+        sonet (35),
+        digitalWrapper (36),
+        lambda (37),
+        etsiPdh (38),
+        ansiPdh (39),
+        laps (40),
+        fddi (41),
+        dqdb (42),
+        fiberch3 (43),
+        hdlc (44),
+        etherV2di (45),
+        ether8023 (46),
+        etherGfpSonet (56)
+   }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object indicates the payload carried by the LSP.It is only
+      required when GMPLS will be used for this LSP.
+
+        Only valid if Generalized Label Request is in use as specified
+        by mplsTunnelLSPEncodingType.
+        This object is only meaningful if mplsTunnelLSPEncoding is not
+        set to 0"
+   DEFVAL  { 0 }
+   ::= { mplsTunnelEntry 43 }
+
+
+mplsTunnelSecondary OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "Indicates that the requested LSP is a secondary LSP.
+
+        This is a GMPLS feature, and should only be used when GMPLS will be
+        be used for this LSP.
+
+       This object is only meaningful if mplsTunnelLSPEncoding is not
+       set to 0."
+   REFERENCE
+     "Berger, L., et al., Generalized Multi-Protocol
+      Label Switching (GMPLS) Signaling Functional
+      Description, RFC 3471, January 2003."
+   DEFVAL  { false }   
+::= { mplsTunnelEntry 44 }
+
+mplsTunnelDirection OBJECT-TYPE
+   SYNTAX        INTEGER {
+     out (0),
+     outbidir (1),
+-- PRVT-Addition
+     in (2),
+     hwbidir (3),
+     inbidir (4),
+     transuni (5),
+     transbi (6),
+     transbih (7)
+-- End PRVT-Addition
+
+   }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Whether   this  tunnel  is  unidirectional-incoming,
+        unidirectional-outgoing, bidirectional in hardware,
+        the terminator end of a signalled bidirectional
+        tunnel, the initiator end of a signalled
+        bidirectional tunnel, unidirectional at transit,
+        signalled bidirectional at transit, or bidirectional
+        in hardware at transit.
+
+      Values of this object other than 'out' are meaningful
+      only if mplsTunnelLSPEncoding is not set to 0."
+   DEFVAL        { out }
+   ::= { mplsTunnelEntry 45 }
+
+mplsTunnelPathComp OBJECT-TYPE
+   SYNTAX  INTEGER {
+       dynamicFull(1),-- CSPF fully computed
+       explicit(2),-- fully specified path
+       dynamicPartial(3) -- CSPF partially computed
+   }
+   MAX-ACCESS read-create
+   STATUS current
+   DESCRIPTION
+     "This value instructs the source node on how to perform path
+      computation on the explicit route specified by the associated
+      entries in the mplsTunnelHopTable.
+
+        dynamicFull
+        The user specifies at least the source and
+        destination of the path and expects that the CSPF
+        will calculate the remainder of the path.
+
+        explicit
+        The user specifies the entire path for the tunnel to
+        take. This path may contain strict or loose hops.
+        Evaluation of the explicit route will be performed
+        hop by hop through the network.
+
+        dynamicPartial
+        The user specifies at least the source and
+        destination of the path and expects that the CSPF
+        will calculate the remainder of the path. The path
+        computed by CSPF is allowed to be only partially
+        computed allowing the remainder of the path to be
+        filled in across the network.
+
+      This object deprecates mplsTunnelHopEntryPathComp."
+   DEFVAL { dynamicFull }
+ ::= { mplsTunnelEntry 46 }
+
+mplsTunnelUpNotRecipType OBJECT-TYPE
+   SYNTAX  InetAddressType
+   MAX-ACCESS read-create
+   STATUS  current
+   DESCRIPTION
+     "Type of upstream notify recipient address for this tunnel."
+   DEFVAL { unknown }
+ ::= { mplsTunnelEntry 101 }
+
+mplsTunnelUpNotRecip OBJECT-TYPE
+   SYNTAX  InetAddress
+   MAX-ACCESS read-create
+   STATUS  current
+   DESCRIPTION
+     "Indicates the address of the upstream recipient for Notify
+      messages relating to this tunnel.
+
+      This object is only valid when signaling a tunnel using RSVP. It
+      is also not valid at the tail end of the tunnel.
+
+      If set to 0, no Notify Request object will be included in
+      outgoing Path messages."
+   REFERENCE
+     "Generalized MPLS Signaling - RSVP-TE Extensions, Berger,
+      L. (Editor), RFC 3473, January 2003."
+ ::= { mplsTunnelEntry 47 }
+
+mplsTunnelDownNotRecipType OBJECT-TYPE
+   SYNTAX  InetAddressType
+   MAX-ACCESS read-create
+   STATUS  current
+   DESCRIPTION
+     "Type of downstream notify recipient address for this tunnel."
+   DEFVAL { unknown }
+ ::= { mplsTunnelEntry 102 }
+
+mplsTunnelDownNotRecip OBJECT-TYPE
+   SYNTAX  InetAddress
+   MAX-ACCESS read-create
+   STATUS  current
+   DESCRIPTION
+     "Indicates the address of the downstream recipient for Notify
+      messages relating to this tunnel.
+
+      This object is only valid when signaling a tunnel using RSVP. It
+      is also not valid at the head end of the tunnel.
+
+      If set to 0, no Notify Request object will be included in
+      outgoing Resv messages."
+
+   REFERENCE
+     "Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L.
+      (Editor), RFC 3473, January 2003."
+ ::= { mplsTunnelEntry 48 }
+
+mplsTunnelAdminStatusFlags OBJECT-TYPE
+   SYNTAX      BITS {
+          delInProgress (0),
+          adminDown (1),
+          testing (2),
+           reserved3 (3),            -- reserved
+           reserved4 (4),            -- reserved
+           reserved5 (5),            -- reserved
+           reserved6 (6),            -- reserved
+           reserved7 (7),            -- reserved
+           reserved8 (8),            -- reserved
+           reserved9 (9),            -- reserved
+           reserved10 (10),          -- reserved
+           reserved11 (11),          -- reserved
+           reserved12 (12),          -- reserved
+           reserved13 (13),          -- reserved
+           reserved14 (14),          -- reserved
+           reserved15 (15),          -- reserved
+           reserved16 (16),          -- reserved
+           reserved17 (17),          -- reserved
+           reserved18 (18),          -- reserved
+           reserved19 (19),          -- reserved
+           reserved20 (20),          -- reserved
+           reserved21 (21),          -- reserved
+           reserved22 (22),          -- reserved
+           reserved23 (23),          -- reserved
+           reserved24 (24),          -- reserved
+           reserved25 (25),          -- reserved
+           reserved26 (26),          -- reserved
+           reserved27 (27),          -- reserved
+           reserved28 (28),          -- reserved
+           reserved29 (29),          -- reserved
+           reserved30 (30),          -- reserved
+           reflect (31)
+          }
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "Determines the setting of the Admin Status flags in the
+       Admin Status object or TLV, as described in RFC 3471. Setting
+       this field to a non-zero value will result in the inclusion of
+       the admin status object on signaling messages.
+
+         If the prvtMplsTeMibAllowGracefulDeletion product MIB field
+         is set, then the delInProgress flag is
+         not writable.  Instead, Use the deletion_mode setting to
+         indicate whether Graceful deletion should be used for
+         the tunnel.
+
+       This value of this object can be modified when the
+       corresponding mplsTunnelRowStatus and mplsTunnelAdminStatus
+       is active(1). By doing so, a new signaling message will be
+       triggered including the requested Admin Status object or
+       TLV."
+   REFERENCE
+     "Berger, L., et al., Generalized Multi-Protocol Label Switching
+      (GMPLS) Signaling Functional Description, RFC 3471,
+      January 2003."
+   DEFVAL  { { } }
+   ::= { mplsTunnelEntry 49 }
+
+mplsTunnelExtraParamsPtr  OBJECT-TYPE
+   SYNTAX       RowPointer
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+     "Some Tunnels will run over transports that can usefully support
+      technology-specific additional parameters (for example, SONET
+      resource usage). Such parameters can be supplied in an external
+      table and referenced from here.
+
+      In this implementation of the mplsTunnelTable, the row must either
+      be set to zeroDotZero, or must point at an entry in the
+      mplsTunnelSonetResTable.
+
+      If a value other than zeroDotZero is used, then
+      mplsTunnelResourcePointer must be set to zeroDotZero."
+   ::= { mplsTunnelEntry 50 }
+
+mplsTunnelUseEgressLabel OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+      "Whether or not to use an explicit route Label subobject as
+       configured in mplsTunnelEgressLabel."
+    DEFVAL { false }
+   ::= { mplsTunnelEntry 51 }
+
+mplsTunnelEgressLabel OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "The egress control Label in the explicit route, and its
+      length.
+
+      At ingress, this value must be inserted as the last hop of the
+      explicit route.
+
+      At egress this is the value of the received Label subobject.
+      Since 0 is a valid value, the validity of this field is
+      indicated by mplsTunnelUseEgressLabel.
+
+      When this label is used in signaling protocol messages,
+      it is copied byte for byte as is.  Therefore, if the label
+      octet string is intended to represent multibyte values, it
+      should encode those values in network (big-endian) byte
+      order.  This interpretation applies in particular to the
+      non-generalized MPLS labels (32 bits) used in ATM, FR and
+      generic MPLS networks."
+
+   ::= { mplsTunnelEntry 52 }
+
+mplsTunnelEgressLabelType OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabelType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The C-Type of the egress control Label configured in
+        mplsTunnelEgressLabel."
+   ::= { mplsTunnelEntry 53 }
+
+mplsTunnelOmitEROIfOneHop OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Indicates whether the explicit route object should be
+        omitted from the Path message when the tunnel consists of
+        just one loose hop.
+
+        Note that if mplsTunnelHopTableIndex is set to 0, the
+        tunnel is routed to the address configured in
+        mplsTunnelEgressLSRId.  This avoids the need to configure
+        a single loose hop containing the tunnel's destination
+        address and setting this field to true."
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 54 }
+
+mplsTunnelPrivateData OBJECT-TYPE
+   SYNTAX        MplsTunnelPrivateDataSyntax
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This object contains the customer defined private data for
+        the forward signaling direction.  At ingress it is
+        filled in with the private data present on the MIB SET
+        message.  Note that this field can be updated even when
+        the Tunnel is OperUp.
+        At egress it is filled in with the decoded forward private
+        data.
+        Note that there is a separate MIB field for the reverse
+        signaling direction private data,
+        mplsTunnelReversePrivateData."
+   ::= { mplsTunnelEntry 55 }
+
+mplsTunnelSrcTNAAddressType OBJECT-TYPE
+  SYNTAX         INTEGER {
+       none (0),
+       ipv4 (1),
+       ipv6 (2),
+       nsap (3)
+  }
+  MAX-ACCESS     read-create
+  STATUS         current
+  DESCRIPTION
+      "Type of the source TNA address of this tunnel.  This field
+       is used for UNI.  For standard MPLS and GMPLS, this field
+       must be set to none."
+  DEFVAL        { none }
+  ::= { mplsTunnelEntry 56 }
+
+mplsTunnelSrcTNAAddress OBJECT-TYPE
+  SYNTAX         MplsTunnelTNAAddress
+  MAX-ACCESS     read-create
+  STATUS         current
+  DESCRIPTION
+      "Source TNA address of this tunnel.  This field is only
+       valid if mplsTunnelSrcTNAAddressType is not none."
+  ::= { mplsTunnelEntry 57 }
+
+mplsTunnelDestTNAAddressType OBJECT-TYPE
+  SYNTAX         INTEGER {
+       none (0),
+       ipv4 (1),
+       ipv6 (2),
+       nsap (3)
+  }
+  MAX-ACCESS     read-create
+  STATUS         current
+  DESCRIPTION
+      "Type of the destination TNA address of this tunnel.  This
+       field is used for UNI.  For standard MPLS and GMPLS, this
+       field must be set to none."
+   DEFVAL        { none }
+  ::= { mplsTunnelEntry 58 }
+
+mplsTunnelDestTNAAddress OBJECT-TYPE
+  SYNTAX         MplsTunnelTNAAddress
+  MAX-ACCESS     read-create
+  STATUS         current
+  DESCRIPTION
+      "Destination TNA address of this tunnel.  This field is only
+       valid if mplsTunnelDestTNAAddressType is not none."
+  ::= { mplsTunnelEntry 59 }
+
+mplsTunnelEndToEndRerouting OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Indicates that Crankback End to End rerouting should be
+        enabled on this LSP.  Setting this flag will cause Rerouting
+        information to be returned to the ingress node on PathErrs
+        and Notifications.
+
+        No Rerouting information will be included if the Path
+        Message does not contain an ERO.  Rerouting
+        information will be limited to 'Node' errors unless a
+        switch managed label space is used."
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 60 }
+
+mplsTunnelIsUni OBJECT-TYPE
+   SYNTAX       TruthValue
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+       "This flag indicates whether the tunnel is to conform to
+        UNI 1.0."
+
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 62 }
+
+mplsTunnelUniServiceLevel OBJECT-TYPE
+   SYNTAX       Integer32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+       "Indicates the UNI service level.  It is only valid when
+        _is_uni_ is set to true."
+   ::= { mplsTunnelEntry 63 }
+
+mplsTunnelUniEgressLabel OBJECT-TYPE
+   SYNTAX       MplsGeneralizedLabel
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The label to be used at the destination UNI in the
+                 forward direction.
+
+                 This field is only valid if one of mplsTunnelIsUni or
+                 mplsTunnelIsSpc is set, and must be filled in if
+                 mplsTunnelIsSpc is set."
+
+   ::= { mplsTunnelEntry 64 }
+
+mplsTunnelUniEgressLabelType OBJECT-TYPE
+   SYNTAX       MplsGeneralizedLabelType
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The C-Type of the forward label to be used at the
+                 destination UNI.
+
+                 This field is only valid if one of mplsTunnelIsUni or
+                 mplsTunnelIsSpc is set, and must be filled in if
+                 mplsTunnelIsSpc is set."
+
+   ::= { mplsTunnelEntry 65 }
+
+mplsTunnelUniEgressLabelPort OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The logical port identifier used to uniquely identify and
+                 select a (forward) data link at the destination UNI.
+
+                 This port identifier is relative to the destination UNI-C
+                 for UNI-initiated connections, but is relative to the
+                 destination UNI-N for connections that are initiated by
+                 management at the source UNI-N.
+
+                 This field is only valid if one of mplsTunnelIsUni or
+                 mplsTunnelIsSpc is set, and must be filled in if
+                 mplsTunnelIsSpc is set."
+
+   ::= { mplsTunnelEntry 66 }
+
+mplsTunnelUniRvsEgressLabel OBJECT-TYPE
+   SYNTAX       MplsGeneralizedLabel
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The label to be used at the destination UNI in the
+                 reverse direction.
+
+                 This field is only valid if one of mplsTunnelIsUni or
+                 mplsTunnelIsSpc is set, and must be filled in if
+                 mplsTunnelIsSpc is set and the tunnel is bi-directional."
+
+   ::= { mplsTunnelEntry 67 }
+
+mplsTunnelUniRvsEgressLabelType OBJECT-TYPE
+   SYNTAX       MplsGeneralizedLabelType
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The C-Type of the reverse label to be used at the
+                 destination UNI.
+
+                 This field is only valid if one of mplsTunnelIsUni or
+                 mplsTunnelIsSpc is set, and must be filled in if
+                 mplsTunnelIsSpc is set and the tunnel is bi-directional."
+
+   ::= { mplsTunnelEntry 68 }
+
+mplsTunnelUniRvsEgressLabelPort OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The logical port identifier used to uniquely identify and
+                 select a (reverse) data link at the destination UNI.
+
+                 This port identifier is relative to the destination UNI-C
+                 for UNI-initiated connections, but is relative to the
+                 destination UNI-N for connections that are initiated by
+                 management at the source UNI-N.
+
+                 This field is only valid if one of mplsTunnelIsUni or
+                 mplsTunnelIsSpc is set, and must be filled in if
+                 mplsTunnelIsSpc is set and the tunnel is bi-directional."
+
+   ::= { mplsTunnelEntry 69 }
+
+mplsTunnelDeletionMode OBJECT-TYPE
+   SYNTAX       INTEGER {
+                     forced(1),
+                     graceful(2)
+                     }
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "Whether to use forced or graceful deletion to delete this
+                 LSP.  This field is ignored if graceful deletion is not
+                 allowed in the TE-MIB entity MIB."
+
+   DEFVAL        { forced }
+   ::= { mplsTunnelEntry 70 }
+
+mplsTunnelUniDiversityListIndex OBJECT-TYPE
+   SYNTAX       Integer32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "UNI specific.  This field references a
+                 prvtMplsTunnelUNIDivListIndex in the
+                 mplsTunnelUNIDiversityTable, and defines this list of
+                 tunnels to be diverse from.  A value of zero indicates
+                 that no diversity is configured.
+
+                 Note that if the diversity requirements specified in the
+                 referenced diversity list cannot be satisfied by
+                 signaling, this tunnel will fail to move to oper_status
+                 up.  See the Description in the
+                 mplsTunnelUNIDiversityTable for more information."
+
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 71 }
+
+mplsTunnelDiffServIndex OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Index into the mplsDiffServTable entry that
+          specifies the L-LSP or E-LSP parameters to signal
+          when setting up the tunnel.  If this field is not filled
+          in or is assigned the value zero then no DiffServ
+          parameters are signalled."
+   REFERENCE
+        "Le Faucher, et. al, MPLS Support of Differentiated
+          Services, Internet Draft <draft-ietf-mpls-diff-
+          ext-09.txt>, April 2001."
+   ::= { mplsTunnelEntry 72 }
+
+mplsTunnelReversePrivateData OBJECT-TYPE
+   SYNTAX        MplsTunnelPrivateDataSyntax
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This object contains the customer defined private data for
+         the reverse signaling direction.  At egress it is
+         initially set by the RRR_EGRESS_TRANSLATE_PRIV_DATA user exit and
+         subsequently may be altered via MIB operations.
+         At ingress it is filled in with the decoded reverse
+         private data.
+         Note that there is a separate MIB field for the forward
+         signaling direction private data, mplsTunnelPrivateData."
+   ::= { mplsTunnelEntry 73 }
+
+mplsTunnelFastRerouteMode OBJECT-TYPE
+   SYNTAX        INTEGER {
+      noFastReroute(0),
+      detourFastReroute(1),
+      facilityFastReroute(2)
+   }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Indicates whether or not this tunnel should be protected
+          by a fast reroute mechanism, and if so which method should
+          be used.
+          noFastReroute       - no fast reroute protection.
+          detourFastReroute   - fast reroute protection using the
+                                one-to-one detour backup method.
+          facilityFastReroute - fast reroute protection using the
+                                facility backup method.
+          Fast reroute is only available for uni-directional LSPs."
+   DEFVAL        { noFastReroute }
+   ::= { mplsTunnelEntry 74 }
+
+mplsTunnelBackupSetupPrio OBJECT-TYPE
+   SYNTAX        Integer32 (0..7)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Setup priority for backup tunnels set up to protect this
+         tunnel.  This field is only valid if the mplsTunnelFastRerouteMode
+         above is not noFastReroute."
+   ::= { mplsTunnelEntry 75 }
+
+mplsTunnelBackupHoldingPriority OBJECT-TYPE
+   SYNTAX        Integer32 (0..7)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Holding priority for backup tunnels set up to protect this
+         tunnel.  This field is only valid if the mplsTunnelFastRerouteMode
+         above is not noFastReroute."
+   ::= { mplsTunnelEntry 76 }
+
+mplsTunnelBackupIncAny OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Include-any resource affinity for backup tunnels set up to
+         protect this tunnel.
+         A link satisfies the include-any constraint if and only if
+         the constraint is zero, or the link and the constraint
+         have a resource class in common.
+         This field is only valid if the mplsTunnelFastRerouteMode
+         above is not noFastReroute."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 77 }
+
+mplsTunnelBackupIncAll OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Include-all resource affinity for backup tunnels set up to
+         protect this tunnel.
+         A link satisfies the include-all constraint if and only if
+         the link contains all of the adminstrative groups
+         specified in the constraint.
+         This field is only valid if the mplsTunnelFastRerouteMode
+         above is not noFastReroute."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 78 }
+
+mplsTunnelBackupExcAny OBJECT-TYPE
+   SYNTAX        MplsTunnelAffinity
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Exclude-any resource affinity for backup tunnels set up to
+         protect this tunnel.
+         A link satisfies the exclude-any constraint if and only if
+         the constraint is zero, or the link and the constraint
+         have a resource class in common.
+         This field is only valid if the mplsTunnelFastRerouteMode
+         above is not noFastReroute."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 79 }
+
+mplsTunnelBackupBandwidth OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "1000s of bits per second"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The estimated bandwidth required for backup tunnels, in
+         units of 1000 bits/second.  A value of zero indicates
+         best-effort.
+         This field is only valid if the mplsTunnelFastRerouteMode
+         above is not noFastReroute."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 80 }
+
+mplsTunnelBackupMaxHops OBJECT-TYPE
+   SYNTAX        Unsigned32(0..255)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The maximum number of extra hops the backup path is
+         allowed to take, from a Point of Local Repair (PLR) to a
+         Merge Point (MP), with PLR and MP excluded in counting.
+         A hop-limit of 0 means only direct links between PLR and MP
+         can be used.
+         This field is only valid if the mplsTunnelFastRerouteMode
+         above is not noFastReroute."
+   DEFVAL        { 255 }
+   ::= { mplsTunnelEntry 81 }
+
+mplsTunnelIsSpc OBJECT-TYPE
+   SYNTAX       TruthValue
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+       "This flag indicates whether the tunnel is an OIF soft
+        permanent connection (SPC)."
+
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 84 }
+
+mplsTunnelUniIngressLabel OBJECT-TYPE
+   SYNTAX       MplsGeneralizedLabel
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The label to be used for the in-segment at the source
+                 UNI-N in the forward direction.
+
+                 This field is only valid if the mplsTunnelIsSpc field
+                 is true."
+
+   ::= { mplsTunnelEntry 85 }
+
+mplsTunnelUniIngressLabelType OBJECT-TYPE
+   SYNTAX       MplsGeneralizedLabelType
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The C-Type of the forward label to be used for the
+                 in-segment at the source UNI-N.
+
+                 This field is only valid if the mplsTunnelIsSpc field
+                 is true."
+
+   ::= { mplsTunnelEntry 86 }
+
+mplsTunnelUniIngressLabelPort OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The logical port identifier used to uniquely identify and
+                 select a (forward) data link for the in-segment at the
+                 source UNI-N.
+
+                 This field is only valid if the mplsTunnelIsSpc field
+                 is true."
+
+   ::= { mplsTunnelEntry 87 }
+
+mplsTunnelUniRvsIngrLabel OBJECT-TYPE
+   SYNTAX       MplsGeneralizedLabel
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The label to be used at the source UNI-N for the
+                 out-segment in the reverse direction.
+
+                 This field is only valid if the mplsTunnelIsSpc field
+                 is true."
+
+   ::= { mplsTunnelEntry 88 }
+
+mplsTunnelUniRvsIngrLabelType OBJECT-TYPE
+   SYNTAX       MplsGeneralizedLabelType
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The C-Type of the reverse label to be used for the
+                 out-segment at the source UNI-N.
+
+                 This field is only valid if the mplsTunnelIsSpc field
+                 is true."
+
+   ::= { mplsTunnelEntry 89 }
+
+mplsTunnelUniRvsIngrLabelPort OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION  "The logical port identifier used to uniquely identify and
+                 select a data link for the reverse out-segment at the
+                 source UNI-N.
+
+                 This field is only valid if the mplsTunnelIsSpc field
+                 is true."
+
+   ::= { mplsTunnelEntry 90 }
+
+mplsTunnelDiffServClassType OBJECT-TYPE
+   SYNTAX        Integer32 (0..7)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION   "DiffServ Class-Type of the LSP as defined in
+                  draft-ietf-tewg-diff-te-proto-03."
+
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 91 }
+
+mplsTunnelExtendedProtection OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Indicates that the requested LSP should use the extended PROTECTION
+        object as defined in draft-lang-ccamp-gmpls-recovery-e2e-signaling.
+        This is a GMPLS feature, and should only be used when GMPLS will
+        be used for this LSP."
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 92 }
+
+mplsTunnelProtecting OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Indicates that the requested LSP is a protecting LSP and not a
+        working LSP.
+        This field is only valid if mplsTunnelExtendedProtection is true."
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 93 }
+
+mplsTunnelNotification OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Indicates that the control plane message exchange is only used for
+        notification during protection switching.
+        This field is only valid if mplsTunnelExtendedProtection is true."
+   DEFVAL        { false }
+   ::= { mplsTunnelEntry 94 }
+
+mplsTunnelLspProtection OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+
+       "This field indicates the level of end-to-end protection
+        for this LSP.
+        This field is only valid if mplsTunnelExtendedProtection is true.
+        A value  of zero indicates that no protection is provided for the
+        tunnel.
+
+        This field is not a bitmask; only one LSP protection may be selected.
+        See draft-lang-ccamp-gmpls-recovery-e2e-signaling for a
+        description of the possible values."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelEntry 95 }
+
+mplsTunnelAssociatedLspId OBJECT-TYPE
+   SYNTAX        MplsTunnelInstanceIndex
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The mplsTunnelInstance of an associated tunnel between the
+        same ingress and egress and with the same mplsTunnelIndex.
+        If this field is zero, the associated LSP ID is not known,
+        or there are multiple.
+        This field is only valid if mplsTunnelExtendedProtection is true."
+   DEFVAL        { 0 }
+::= { mplsTunnelEntry 96 }       
+
+mplsTunnelCallIdType OBJECT-TYPE
+   SYNTAX       INTEGER {
+                     operatorSpecific(1),
+                     globallyUnique(2)
+                     }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The C-Type of the following CALL ID.  This field is
+        insignificant if the mplsTunnelCallId has zero length.
+        This field can only be changed when the Admin Status is down."
+   ::= { mplsTunnelEntry 97 }
+
+mplsTunnelCallId OBJECT-TYPE
+   SYNTAX        OCTET STRING (SIZE (0..255))
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "The CALL ID to be used on this tunnel, including the
+        address type, International and National segment (if applicable),
+        source transport network element address, and Local
+        Identifier as defined in G.7713.2 (version 0.8).
+        This field can only be changed when the Admin Status is down."
+   ::= { mplsTunnelEntry 98 }
+
+mplsTunnelIsIpv6 OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Flag indicating whether this tunnel uses IPv6 addresses.
+        If this flag is set, the tunnel may only be activated if
+        - TE-MIB is configured to allow IPv6 tunnels
+        - the hop path index is non-zero
+        - all hops in the hop path have IPv6 addresses
+        - the first and last hops in the hop path have global
+          scope addresses."
+   DEFVAL { false }
+   ::= {mplsTunnelEntry 100}
+
+mplsTunnelMtu OBJECT-TYPE
+    SYNTAX        Integer32
+  	MAX-ACCESS    read-create
+   	STATUS        current
+   	DESCRIPTION
+       "Maximal transfer unit of the tunnel"
+::= { mplsTunnelEntry 103 }
+
+mplsTunnelRebuildTimer OBJECT-TYPE
+    SYNTAX        TimeTicks
+  	MAX-ACCESS    read-create
+   	STATUS        current
+   	DESCRIPTION
+       "Defines a period in minutes (0..1440), after which the tunnel will be unconditionally
+        rebuild. The maximal valid value is 1440 minutes (24 hours)"
+   	DEFVAL { 60 }
+::= { mplsTunnelEntry 104 }
+
+mplsTunnelOperStatusFlags OBJECT-TYPE
+    SYNTAX        BITS { empty(0), 
+                         tunnelResignalling(1), 
+                         tunnelSuppressed(2)
+                       }
+  	MAX-ACCESS    read-create
+   	STATUS        current
+   	DESCRIPTION
+       "Flags to extend the information of the tunnel state
+For the behaviour - bits meaning:
+tunnelResignalling (1) - This status shows that currently the tunnel 
+has been resignalled. The resignalling state of a tunnel 
+should be considered together with the mplsTunnelOperStatus 
+attribute value of the same tunnel.
+tunnelSuppressed (2) - This status shows that the tunnel has 
+been established, but higher priority tunnel is active 
+and in use. This tunnel can be activated, once the higher 
+protocol tunnel fails by any reason, and in this case 
+the tunnelSuppressed status will be cleared.
+		 "
+
+::= { mplsTunnelEntry 105 }
+
+mplsTunnelGuardedDest OBJECT-TYPE
+    SYNTAX        InetAddressIPv4
+  	MAX-ACCESS    read-create
+   	STATUS        current
+   	DESCRIPTION
+       "The guarded destination object specifies which IP destination address the current
+        tunnel protects used with the fast reroute feature.
+       The tunnel must not be fast reroute enabled."
+::= { mplsTunnelEntry 106 }
+
+mplsTunnelMBBTimeOut OBJECT-TYPE
+    SYNTAX        Integer32
+  	MAX-ACCESS    read-create
+   	STATUS        current
+   	DESCRIPTION
+       "Specifies the timer configuration (in minutes) for Make-before-break (MBB).
+        The default value of this object is 10 minutes."
+::= { mplsTunnelEntry 107 }
+
+-- End Addition
+
+-- End of mplsTunnelTable
+
+-- Addition
+mplsTunnelHopIndexNextTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_HOPNI
+   SYNTAX        SEQUENCE OF MplsTunnelHopIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next available values of
+        mplsTunnelHopIndex for all entities."
+   ::= { mplsTeObjects 3 }
+
+mplsTunnelHopIndexNextEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelHopIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        mplsTunnelHopIndex for a specific TE-MIB entity.
+        This MIB table is indexed by the PRVT-TE-MIB entity Index."
+
+   INDEX  { prvtMplsTeMibEntityIndex }
+      ::= { mplsTunnelHopIndexNextTable 1 }
+
+MplsTunnelHopIndexNextEntry ::= SEQUENCE {
+      mplsTunnelHopIndexNextIndex        Unsigned32
+    }
+-- End Addition
+
+mplsTunnelHopIndexNextIndex OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This object contains an appropriate value to be used
+          for mplsTunnelHopListIndex when creating entries in
+          the mplsTunnelHopTable.  If the number of
+          unassigned entries is exhausted, a retrival
+          operation will return a value of 0.  This object
+          may also return a value of 0 when the LSR is unable
+          to accept conceptual row creation, for example, if
+          the mplsTunnelHopTable is implemented as read-only.
+          To obtain the value of mplsTunnelHopListIndex for a
+          new entry in the mplsTunnelHopTable, the manager
+          issues a management protocol retrieval operation to
+          obtain the current value of mplsTunnelHopIndex.
+          After each retrieval operation, the agent should
+          modify the value to reflect the next unassigned
+          index.  After a manager retrieves a value the agent
+          will determine through its local policy when this
+          index value will be made available for reuse."
+   ::= { mplsTunnelHopIndexNextEntry 1 }
+
+mplsTunnelHopTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_HOP
+   SYNTAX        SEQUENCE OF MplsTunnelHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelHopTable is used to indicate the hops,
+          strict or loose, for an MPLS tunnel defined in
+          mplsTunnelTable, when it is established via
+          signaling, for the outgoing direction of the
+          tunnel.  Each row in this table is indexed by
+          mplsTunnelHopListIndex.  Each row also has a
+          secondary index mplsTunnelHopIndex corresponding to
+          the next hop that this row corresponds to.  The
+          first row in the table is the first hop after the
+          origination point of the tunnel.  In case we want
+          to specify a particular interface on the
+          originating LSR of an outgoing tunnel by which we
+          want packets to exit the LSR, we specify this as
+          the first hop for this tunnel in
+          mplsTunnelHopTable."
+   ::= { mplsTeObjects 4 }
+
+mplsTunnelHopEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a tunnel hop.  An
+          entry is created by a network administrator for
+          signaled ERLSP set up by an MPLS signaling
+          protocol."
+   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelHopListIndex,
+           mplsTunnelHopPathOptionIndex, mplsTunnelHopIndex }
+      ::= { mplsTunnelHopTable 1 }
+
+MplsTunnelHopEntry ::= SEQUENCE {
+      mplsTunnelHopListIndex                     MplsPathIndex,
+      mplsTunnelHopPathOptionIndex               MplsPathIndex,
+      mplsTunnelHopIndex                         MplsPathIndex,
+      mplsTunnelHopAddrType                      TeHopAddressType,
+      mplsTunnelHopIpAddr                        TeHopAddress,
+      mplsTunnelHopIpPrefixLen                   Unsigned32,
+      mplsTunnelHopAsNumber                      TeHopAddressAS,
+      mplsTunnelHopAddrUnnum                     TeHopAddressUnnum,
+      mplsTunnelHopLspId                         MplsLSPID,
+      mplsTunnelHopType                          INTEGER,
+      mplsTunnelHopInclude                       TruthValue,
+      mplsTunnelHopPathOptionName                DisplayString,
+      mplsTunnelHopEntryPathComp                 INTEGER,
+      mplsTunnelHopRowStatus                     RowStatus,
+      mplsTunnelHopStorageType                   StorageType,
+      mplsTunnelHopLabelStatuses                 BITS,
+      mplsTunnelHopExpLabelType                  MplsGeneralizedLabelType,
+      mplsTunnelHopExpLabel                      MplsGeneralizedLabel,
+      mplsTunnelHopExpRvrsLabelType              MplsGeneralizedLabelType,
+      mplsTunnelHopExpRvrsLabel                  MplsGeneralizedLabel
+   }
+
+mplsTunnelHopListIndex OBJECT-TYPE
+   SYNTAX         MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Primary index into this table identifying a
+          particular explicit route object."
+   ::= { mplsTunnelHopEntry 1 }
+
+mplsTunnelHopPathOptionIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Secondary index into this table identifying a
+          particular group of hops representing a particular
+          configured path. This is otherwise known as a path
+          option."
+   ::= { mplsTunnelHopEntry 2 }
+
+mplsTunnelHopIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Secondary index into this table identifying a
+          particular hop."
+   ::= { mplsTunnelHopEntry 3 }
+
+mplsTunnelHopAddrType OBJECT-TYPE
+    SYNTAX        TeHopAddressType
+   MAX-ACCESS    read-create
+   STATUS        current
+    DESCRIPTION  "The Hop Address Type of this tunnel hop.
+
+                  The value of this object cannot be changed
+                  if the value of the corresponding
+                  mplsTunnelHopRowStatus object is 'active'.
+
+                  Note that lspid(5) is a valid option only
+                  for tunnels signaled via CRLDP.
+                 "
+    DEFVAL        { 1 }
+   ::= { mplsTunnelHopEntry 4 }
+
+mplsTunnelHopIpAddr OBJECT-TYPE
+    SYNTAX        TeHopAddress
+   MAX-ACCESS    read-create
+   STATUS        current
+    DESCRIPTION  "The Tunnel Hop Address for this tunnel hop.
+
+                  The type of this address is determined by the
+                  value of the corresponding mplsTunnelHopAddrType.
+
+                  The value of this object cannot be changed
+                  if the value of the corresponding
+                  mplsTunnelHopRowStatus object is 'active'.
+                 "
+   ::= { mplsTunnelHopEntry 5 }
+
+ mplsTunnelHopIpPrefixLen OBJECT-TYPE
+    SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+    DESCRIPTION  "If mplsTunnelHopAddrType is set to ipv4(1) or
+                  ipv6(2), then this value will contain an
+                  appropriate prefix length for the IP address in
+                  object mplsTunnelHopIpAddr. Otherwise this value
+                  is irrelevant and should be ignored.
+                 "
+    DEFVAL         { 32 }
+   ::= { mplsTunnelHopEntry 6 }
+
+mplsTunnelHopAsNumber OBJECT-TYPE
+   SYNTAX        TeHopAddressAS
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelHopAddrType is set to asnumber(3), then
+          this value will contain the AS number of this hop.
+          Otherwise the agent should set this object to zero-
+          length string and the manager should ignore this."
+   ::= { mplsTunnelHopEntry 7 }
+
+mplsTunnelHopAddrUnnum OBJECT-TYPE
+   SYNTAX        TeHopAddressUnnum
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelHopAddrType is set to unnum(4) or
+          unnumv6(6), then this value will contain the interface
+          identifier of the unnumbered interface for this hop.
+          This object should be used in conjunction with
+          mplsTunnelHopIpAddress which would contain the LSR
+          Router ID in this case. Otherwise the agent should
+          set this object to zero-length string and the
+          manager should ignore this."
+   ::= { mplsTunnelHopEntry 8 }
+
+mplsTunnelHopLspId OBJECT-TYPE
+   SYNTAX        MplsLSPID
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelHopAddrType is set to lspid(5), then
+          this value will contain the LSPID of a tunnel of
+          this hop. The present tunnel being configured is
+          tunneled through this hop (using label stacking).
+          This object is otherwise insignificant and should
+          contain a value of 0 to indicate this fact."
+   ::= { mplsTunnelHopEntry 9 }
+
+mplsTunnelHopType OBJECT-TYPE
+   SYNTAX        INTEGER {
+                      strict(1),
+                      loose(2)
+                     }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Denotes whether this tunnel hop is routed in a
+          strict or loose fashion. The value of this object
+          has no meaning if the mplsTunnelHopInclude object
+          is set to 'false'."
+   DEFVAL { 2 }
+   ::= { mplsTunnelHopEntry 10 }
+
+mplsTunnelHopInclude OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If this value is set to true, then this indicates
+          that this hop must be included in the tunnel's
+          path. If this value is set to 'false', then this hop
+          must be avoided when calculating the path for this
+          tunnel. The default value of this object is 'true',
+          so that by default all indicated hops are included
+          in the CSPF path computation. If this object is set
+          to 'false' the value of mplsTunnelHopType should be
+          ignored."
+   DEFVAL { true }
+   ::= { mplsTunnelHopEntry 11 }
+
+mplsTunnelHopPathOptionName OBJECT-TYPE
+   SYNTAX        DisplayString
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The description of this series of hops as they
+          relate to the specified path option. The
+          value of this object SHOULD be the same for
+          each hop in the series that comprises a
+          path option."
+   ::= { mplsTunnelHopEntry 12 }
+
+mplsTunnelHopEntryPathComp OBJECT-TYPE
+   SYNTAX        INTEGER {
+                      dynamic(1),    -- CSPF computed
+                      explicit(2)    -- strict hop
+                  }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "If this value is set to dynamic, then the user
+          should only specify the source and destination of
+          the path and expect that the CSPF will calculate
+          the remainder of the path.  If this value is set to
+          explicit, the user should specify the entire path
+          for the tunnel to take.  This path may contain
+          strict or loose hops.  Each hop along a specific
+          path SHOULD have this object set to the same value."
+   ::= { mplsTunnelHopEntry 13 }
+
+mplsTunnelHopRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table.  When a row in this
+          table is in active(1) state, no objects in that row
+          can be modified by the agent except
+          mplsTunnelHopRowStatus and
+          mplsTunnelHopStorageType."
+   ::= { mplsTunnelHopEntry 14 }
+
+mplsTunnelHopStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The storage type for this Hop entry. Conceptual
+         rows having the value 'permanent' need not
+         allow write-access to any columnar objects
+         in the row."
+   DEFVAL { 2 }
+   ::= { mplsTunnelHopEntry 15 }
+
+mplsTunnelHopLabelStatuses OBJECT-TYPE
+   SYNTAX  BITS {
+     forwardPresent (0),
+     reversePresent (1)
+   }
+   MAX-ACCESS read-only
+   STATUS  current
+   DESCRIPTION
+     "This bitmask indicates the presence of labels indicated by the
+      mplsTunnelHopExpLabel and mplsTunnelHopExpRvrsLabel
+      objects.
+
+      For the Present bits, a set bit indicates that a label is
+      present for this hop in the route. This allows zero to be a
+      valid label value."
+   DEFVAL  { { } }
+ ::= { mplsTunnelHopEntry 16 }
+
+mplsTunnelHopExpLabelType OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabelType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Denotes   the  type  of  the  label  configured  in
+        mplsTunnelHopExpLabel."
+   ::= { mplsTunnelHopEntry 17 }
+
+mplsTunnelHopExpLabel OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "If mplsTunnelHopLabelStatuses object indicates that a forward
+      label is present then the label to use on this hop is found in
+      this object."
+ ::= { mplsTunnelHopEntry 18 }
+
+mplsTunnelHopExpRvrsLabelType OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabelType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Denotes   the  type  of  the  label  configured  in
+        mplsTunnelHopExpRvrsLabel."
+   ::= { mplsTunnelHopEntry 19 }
+
+mplsTunnelHopExpRvrsLabel OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "If the mplsTunnelHopLabelStatuses object indicates that a
+      reverse label is present then the label to use on this
+      hop is found in this object."
+ ::= { mplsTunnelHopEntry 20 }
+
+-- End of mplsTunnelHopTable
+
+-- Begin of mplsTunnelResourceTable
+
+-- Addition
+mplsTunnelResourceIndexNextTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_RESNI
+   SYNTAX        SEQUENCE OF MplsTunnelResourceIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next available values of
+        mplsTunnelResourceIndex for all entities."
+   ::= { mplsTeObjects 5 }
+
+mplsTunnelResourceIndexNextEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelResourceIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        mplsTunnelResourceIndex for a specific TE-MIB entity.
+        This MIB table is indexed by the PRVT-TE-MIB entity Index."
+
+   INDEX  { prvtMplsTeMibEntityIndex }
+      ::= { mplsTunnelResourceIndexNextTable 1 }
+
+MplsTunnelResourceIndexNextEntry ::= SEQUENCE {
+      mplsTunnelResourceIndexNextIndex  Unsigned32
+    }
+-- End Addition
+
+mplsTunnelResourceIndexNextIndex OBJECT-TYPE
+   SYNTAX        Unsigned32 (0.. 2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This object contains the next appropriate value to
+          be used for mplsTunnelResourceIndex when creating
+          entries in the mplsTunnelResourceTable. If the
+          number of unassigned entries is exhausted, a
+          retrival operation will return a value of 0.  This
+          object may also return a value of 0 when the LSR is
+          unable to accept conceptual row creation, for
+          example, if the mplsTunnelTable is implemented as
+          read-only.  To obtain the mplsTunnelResourceIndex
+          value for a new entry, the manager must first issue
+          a management protocol retrieval operation to obtain
+          the current value of this object. The agent should
+          modify the value to reflect the next unassigned
+          index after each retrieval operation. After a
+          manager retrieves a value the agent will determine
+          through its local policy when this index value will
+          be made available for reuse."
+   ::= { mplsTunnelResourceIndexNextEntry 1 }
+
+mplsTunnelResourceTable OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_RES
+   SYNTAX        SEQUENCE OF MplsTunnelResourceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelResourceTable allows a manager to
+          specify which resources are desired for an MPLS
+          tunnel.  This table also allows several tunnels to
+          point to a single entry in this table, implying
+          that these tunnels should share resources."
+   ::= { mplsTeObjects 6 }
+
+mplsTunnelResourceEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelResourceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a set of resources
+          for an MPLS tunnel.  An entry can be created by a
+          network administrator or by an SNMP agent as
+          instructed by any MPLS signaling protocol."
+   INDEX  { prvtMplsTeMibEntityIndex, mplsTunnelResourceIndex }
+      ::= { mplsTunnelResourceTable 1 }
+
+MplsTunnelResourceEntry ::= SEQUENCE {
+      mplsTunnelResourceIndex                Unsigned32,
+      mplsTunnelResourceMaxRate              MplsBitRate,
+      mplsTunnelResourceMeanRate             MplsBitRate,
+      mplsTunnelResourceMaxBurstSize         MplsBurstSize,
+      mplsTunnelResourceMeanBurstSize        MplsBurstSize,
+      mplsTunnelResourceExBurstSize          MplsBurstSize,
+      mplsTunnelResourceFrequency            INTEGER,
+      mplsTunnelResourceWeight               Unsigned32,
+      mplsTunnelResourceRowStatus            RowStatus,
+      mplsTunnelResourceStorageType          StorageType
+   }
+
+mplsTunnelResourceIndex OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Uniquely identifies this row."
+   ::= { mplsTunnelResourceEntry 1 }
+
+mplsTunnelResourceMaxRate OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "1000s of bits per second"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The maximum rate in units of 1000 bits/second.
+
+         Note that setting mplsTunnelResourceMaxRate,
+          mplsTunnelResourceMeanRate, and
+          mplsTunnelResourceMaxBurstSize to 0 indicates best-effort
+          treatment.  This object is copied to an instance of
+          mplsTrafficParamMaxRate in mplsTrafficParamTable the OID
+          of which is copied into the corresponding
+          mplsInSegmentTrafficParamPtr.
+
+         If the ingress node sets a maximum rate of positive
+          infinity, the egress node will return a value of
+          positive infinity on the MIB GET response.  This
+          special value may not be used when setting the maximum
+          rate with this MIB."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelResourceEntry 2 }
+
+mplsTunnelResourceMeanRate OBJECT-TYPE
+   SYNTAX        MplsBitRate
+   UNITS         "1000s of bits per second"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The mean rate in units of 1000 bits/second.
+
+         This object is copied into an instance of
+          mplsTrafficParamMeanRate in the
+          mplsTrafficParamTable. The OID of this table entry
+          is then copied into the corresponding
+          mplsInSegmentTrafficParamPtr.
+
+         When resource allocation is performed as requested
+          by this TSpec object, it is copied into an entry in
+          mplsTrafficParamTable [LSRMIB]:
+          mplsTunnelInMeanRate to mplsTrafficParamMeanRate.
+          The OID of this entry is copied to
+          mplsInSegmentTrafficParamPtr of the corresponding
+          in-segment entry."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelResourceEntry 3 }
+
+mplsTunnelResourceMaxBurstSize OBJECT-TYPE
+   SYNTAX        MplsBurstSize
+   UNITS         "bytes"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The maximum burst size in bytes.  This object is
+          copied to mplsInSegmentMaxBurstSize of the
+          corresponding in-segment.
+
+         When resource allocation is performed as requested
+          by this TSpec object, it is copied into an entry in
+          mplsTrafficParamTable [LSRMIB]:
+          mplsTunnelInMaxBurstSize to
+          mplsTrafficParamMaxBurstSize. The OID of this entry
+          is copied to mplsInSegmentTrafficParamPtr of the
+          corresponding in-segment entry."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelResourceEntry 4 }
+
+mplsTunnelResourceMeanBurstSize OBJECT-TYPE
+   SYNTAX       MplsBurstSize
+   UNITS        "bytes"
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "The mean burst size in bytes.  The implementations
+          which do not implement this variable must return 0
+          for this value and must not allow a user to set
+          this value."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelResourceEntry 5 }
+
+mplsTunnelResourceExBurstSize OBJECT-TYPE
+   SYNTAX       MplsBurstSize
+   UNITS        "bytes"
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "The Excess burst size in bytes.  The implementations
+          which do not implement this variable must return
+          noSuchObject(0) exception for this object and must
+          not allow a user to set this value."
+   REFERENCE
+        "CR-LDP Specification, Section 4.3."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelResourceEntry 6 }
+
+mplsTunnelResourceFrequency  OBJECT-TYPE
+   SYNTAX       INTEGER {
+                     unspecified(1),
+                     frequent(2),
+                     veryFrequent(3)
+                 }
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "The granularity of the availability of committed
+          rate.  The implementations which do not implement
+          this variable must return unspecified(1) for this
+          value and must not allow a user to set this value."
+   DEFVAL        { unspecified }
+   ::= { mplsTunnelResourceEntry 7 }
+
+mplsTunnelResourceWeight    OBJECT-TYPE
+   SYNTAX       Unsigned32(0..255)
+   MAX-ACCESS   read-create
+   STATUS       current
+   DESCRIPTION
+        "The relative weight for using excess bandwidth above
+          its committed rate.  The value of 0 means that
+          weight is not applicable for the CR-LSP."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelResourceEntry 8 }
+
+mplsTunnelResourceRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table."
+   ::= { mplsTunnelResourceEntry 9 }
+
+mplsTunnelResourceStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable indicates the storage type for this
+          object."
+   DEFVAL        { 2 }
+   ::= { mplsTunnelResourceEntry 10 }
+
+-- End mplsTunnelResourceTable
+
+-- Tunnel Actual Route Hop table.
+
+mplsTunnelARHopTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_ARHOP
+   SYNTAX        SEQUENCE OF MplsTunnelARHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelARHopTable is used to indicate the
+          hops, strict or loose, for an MPLS tunnel defined
+          in mplsTunnelTable, as reported by the MPLS
+          signaling protocol, for the outgoing direction of
+          the tunnel.  Each row in this table is indexed by
+          mplsTunnelARHopListIndex.  Each row also has a
+          secondary index mplsTunnelARHopIndex, corresponding
+          to the next hop that this row corresponds to.  The
+          first row in the table is the first hop after the
+          origination point of the tunnel.  In case we want
+          to specify a particular interface on the
+          originating LSR of an outgoing tunnel by which we
+          want packets to exit the LSR, we specify this as
+          the first hop for this tunnel in
+          mplsTunnelARHopTable.
+
+         Please note that since the information necessary to
+          build entries within this table are not provided by
+          some MPLS signaling protocols, implementation of
+          this table is optional. Furthermore, since the
+          information in this table is actually provided by
+          the MPLS signaling protocol after the path has been
+          set-up, the entries in this table are provided only
+          for observation, and hence, all variables in this
+          table are accessible exclusively as read-only."
+   ::= { mplsTeObjects 7 }
+
+mplsTunnelARHopEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelARHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a tunnel hop.  An
+          entry is created by a network administrator for
+          signaled ERLSP set up by an MPLS signaling
+          protocol."
+   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelARHopListIndex,
+           mplsTunnelARHopIndex }
+      ::= { mplsTunnelARHopTable 1 }
+
+MplsTunnelARHopEntry ::= SEQUENCE {
+      mplsTunnelARHopListIndex          MplsPathIndex,
+      mplsTunnelARHopIndex              MplsPathIndex,
+      mplsTunnelARHopAddrType           TeHopAddressType,
+      mplsTunnelARHopIpAddr             TeHopAddress,
+      mplsTunnelARHopAddrUnnum          TeHopAddressUnnum,
+      mplsTunnelARHopLspId              MplsLSPID,
+-- Addition
+      mplsTunnelARHopLabelStatuses      BITS,
+      mplsTunnelARHopExpLabelType       MplsGeneralizedLabelType,
+      mplsTunnelARHopExpLabel           MplsGeneralizedLabel,
+      mplsTunnelARHopExpRvrsLabelType   MplsGeneralizedLabelType,
+      mplsTunnelARHopExpRvrsLabel       MplsGeneralizedLabel,
+      mplsTunnelARHopProtection         BITS
+-- End Addition
+   }
+
+mplsTunnelARHopListIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Primary index into this table identifying a
+          particular recorded hop list."
+   ::= { mplsTunnelARHopEntry 1 }
+
+mplsTunnelARHopIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Secondary index into this table identifying the
+          particular hop."
+   ::= { mplsTunnelARHopEntry 2 }
+
+
+mplsTunnelARHopAddrType OBJECT-TYPE
+   SYNTAX        TeHopAddressType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Hop Address Type of this tunnel hop.
+
+         If the type value is set to ipv4(1) or ipv6(2). The tunnel path 
+         can be determin using mplsTunnelARHopIpAddr object.  
+         mplsTunnelARHopAddrUnnum and mplsTunnelARHopLspId 
+         should not be used.
+         
+         If the type value is set to unnum(4) or unnumv6(6). The tunnel path 
+         can be determin using mplsTunnelARHopAddrUnnum object.  
+         mplsTunnelARHopIpAddr and mplsTunnelARHopLspId 
+         should not be used.
+
+         Note that lspid(5) is a valid option only
+         for tunnels signaled via CRLDP. The tunnel path 
+         can be determin using mplsTunnelARHopLspId object.  
+         mplsTunnelARHopIpAddr and mplsTunnelARHopAddrUnnum 
+         should not be used.
+         
+         Currently only ipv4(1) type is supported"
+   DEFVAL        { 1 }
+   ::= { mplsTunnelARHopEntry 3 }
+
+mplsTunnelARHopIpAddr OBJECT-TYPE
+   SYNTAX        TeHopAddress
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Tunnel Hop Address for this tunnel hop.
+
+         The type of this address is determined by the
+         value of the corresponding mplsTunnelARHopAddrType.
+         If mplsTunnelARHopAddrType is set to ipv4(1) or
+         ipv6(2), then this value contains the LSR Router
+         ID of the unnumbered interface. Otherwise the agent
+         SHOULD set this object to the zero-length string
+         and the manager should ignore this object."
+   ::= { mplsTunnelARHopEntry 4 }
+
+mplsTunnelARHopAddrUnnum OBJECT-TYPE
+   SYNTAX        TeHopAddressUnnum
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelARHopAddrType is set to unnum(4) or
+         unnumv6(6), then this value will contain the
+         interface identifier of the unnumbered interface
+         for this hop. This object should be used in
+         conjunction with mplsTunnelARHopIpAddr which would
+         contain the LSR Router ID in this case. Otherwise
+         the agent should set this object to zero-length
+         string and the manager should ignore this."
+   ::= { mplsTunnelARHopEntry 5 }
+
+mplsTunnelARHopLspId OBJECT-TYPE
+   SYNTAX        MplsLSPID
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelARHopAddrType is set to lspid(5), then
+          this value will contain the LSP ID of this hop.
+          This object is otherwise insignificant and should
+          contain a value of 0 to indicate this fact."
+   ::= { mplsTunnelARHopEntry 6 }
+
+-- Addition
+
+mplsTunnelARHopLabelStatuses OBJECT-TYPE
+   SYNTAX        BITS {
+     forwardPresent (0),
+     reversePresent (1),
+     forwardGlobal (2),
+     reverseGlobal (3)
+   }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+     "This bitmask indicates the presence and status of labels
+      indicated by the mplsTunnelARHopExpLabel and
+      mplsTunnelARHopExpRvrsLabel objects.
+
+      For the Present bits, a set bit indicates that a label is
+      present for this hop in the route. For the Global bits, a set
+      bit indicates that the label comes from the Global Label Space.
+      A clear bit indicates that this is a Per- Interface label. A
+      Global bit only has meaning if the corresponding Present bit is
+                         set."
+ ::= { mplsTunnelARHopEntry 7 }
+
+mplsTunnelARHopExpLabelType OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabelType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The C-Type of the following hop label.  This field is
+        insignificant unless mplsTunnelARHopLabelStatuses has the
+        forwardPresent(0) or forwardGlobal(2) bits set."
+   ::= { mplsTunnelARHopEntry 8 }
+
+mplsTunnelARHopExpLabel OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+     "If mplsTunnelARHopLabelStatus has the present(0) bit set,
+      then this value indicates the label value used for this hop.
+      This object is otherwise insignificant and should
+      contain a value of 0.
+
+      When this label is read from a signaling protocol message,
+      it is copied byte for byte as is.  Therefore, if the label
+      octet string is understood to represent multibyte values,
+      it encodes those values in network (big-endian) byte
+      order.  This interpretation applies in particular to the
+      non-generalized MPLS labels (32 bits) used in ATM, FR and
+      generic MPLS networks."
+
+   ::= { mplsTunnelARHopEntry 9 }
+
+mplsTunnelARHopExpRvrsLabelType OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabelType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The C-Type of the following hop label.  This field is
+        insignificant unless mplsTunnelARHopLabelStatuses has the
+        reversePresent(1) or reverseGlobal(3) bits set."
+   ::= { mplsTunnelARHopEntry 10 }
+
+mplsTunnelARHopExpRvrsLabel OBJECT-TYPE
+   SYNTAX  MplsGeneralizedLabel
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+     "If the mplsTunnelARHopLabelStatuses object indicates that a
+      reverse label is present then the label in use on this
+      hop is found in this object."
+ ::= { mplsTunnelARHopEntry 11 }
+
+mplsTunnelARHopProtection  OBJECT-TYPE
+   SYNTAX  BITS {
+     localAvailable (0),
+     localInUse (1)
+   }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+    "Availability and usage of protection on the reported link.
+
+     localAvailable
+        Indicates that the link downstream of this node is protected
+        via a local repair mechanism.
+
+     localInUse
+        Indicates that a local repair mechanism is in use to maintain
+        this tunnel (usually in the face of an outage of the link it
+        was previously routed over)."
+ ::= { mplsTunnelARHopEntry 12 }
+
+-- End Addition
+
+-- End of mplsTunnelARHopTable
+
+
+-- Tunnel Computed Hop table.
+
+mplsTunnelCHopTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_CHOP
+   SYNTAX        SEQUENCE OF MplsTunnelCHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelCHopTable is used to indicate the
+          hops, strict or loose, for an MPLS tunnel defined
+          in mplsTunnelTable, as computed by a constraint-
+          based routing protocol, based on the
+          mplsTunnelHopTable for the outgoing direction of
+          the tunnel.  Each row in this table is indexed by
+          mplsTunnelCHopListIndex.  Each row also has a
+          secondary index mplsTunnelCHopIndex, corresponding
+          to the next hop that this row corresponds to.  The
+          first row in the table is the first hop after the
+          origination point of the tunnel.  In case we want
+          to specify a particular interface on the
+          originating LSR of an outgoing tunnel by which we
+          want packets to exit the LSR, we specify this as
+          the first hop for this tunnel in
+          mplsTunnelCHopTable.
+
+         Please note that since the information necessary to
+          build entries within this table may not be
+          supported by some LSRs, implementation of this
+          table is optional. Furthermore, since the
+          information in this table is actually provided by
+          routing protocol after the path has been computed,
+          the entries in this table are provided only for
+          observation, and hence, all variables in this table
+          are accessible exclusively as read-only."
+   ::= { mplsTeObjects 8 }
+
+mplsTunnelCHopEntry  OBJECT-TYPE
+   SYNTAX        MplsTunnelCHopEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a tunnel hop.  An
+          entry in this table is created by a constraint-
+          based routing protocol based on the hops specified
+          in the corresponding mplsTunnelHopTable."
+   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelCHopListIndex,
+           mplsTunnelCHopIndex }
+      ::= { mplsTunnelCHopTable 1 }
+
+MplsTunnelCHopEntry ::= SEQUENCE {
+      mplsTunnelCHopListIndex                 MplsPathIndex,
+      mplsTunnelCHopIndex                     MplsPathIndex,
+      mplsTunnelCHopAddrType                  TeHopAddressType,
+      mplsTunnelCHopIpAddr                    TeHopAddress,
+      mplsTunnelCHopIpPrefixLen               Unsigned32,
+      mplsTunnelCHopAsNumber                  TeHopAddressAS,
+      mplsTunnelCHopAddrUnnum                 TeHopAddressUnnum,
+      mplsTunnelCHopLspId                     MplsLSPID,
+      mplsTunnelCHopType                      INTEGER,
+      mplsTunnelCHopLabelStatuses             BITS,
+      mplsTunnelCHopExpLabelType              MplsGeneralizedLabelType,
+      mplsTunnelCHopExpLabel                  MplsGeneralizedLabel,
+      mplsTunnelCHopExpRvrsLabelType          MplsGeneralizedLabelType,
+      mplsTunnelCHopExpRvrsLabel              MplsGeneralizedLabel
+   }
+
+mplsTunnelCHopListIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Primary index into this table identifying a
+          particular computed hop list."
+   ::= { mplsTunnelCHopEntry 1 }
+
+mplsTunnelCHopIndex OBJECT-TYPE
+   SYNTAX        MplsPathIndex
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Secondary index into this table identifying the
+          particular hop."
+   ::= { mplsTunnelCHopEntry 2 }
+
+mplsTunnelCHopAddrType OBJECT-TYPE
+   SYNTAX        TeHopAddressType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Hop Address Type of this tunnel hop.
+
+         Note that lspid(5) is a valid option only
+         for tunnels signaled via CRLDP."
+   DEFVAL        { 1 }
+   ::= { mplsTunnelCHopEntry 3 }
+
+mplsTunnelCHopIpAddr OBJECT-TYPE
+   SYNTAX        TeHopAddress
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Tunnel Hop Address for this tunnel hop.
+
+         The type of this address is determined by the
+          value of the corresponding mplsTunnelCHopAddrType.
+
+         If mplsTunnelCHopAddrType is set to unnum(4) or
+         unnumv6(6), then this value will contain the LSR
+         Router ID of the unnumbered interface. Otherwise
+         the agent should set this object to the zero-length
+         string and the manager SHOULD ignore this object."
+   ::= { mplsTunnelCHopEntry 4 }
+
+mplsTunnelCHopIpPrefixLen OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+         "If mplsTunnelCHopAddrType is set to ipv4(1) or
+           ipv6(2), then this value will contain an
+           appropriate prefix length for the IP address in
+           object mplsTunnelCHopIpAddr. Otherwise this value
+           is irrelevant and should be ignored.
+          "
+    DEFVAL         { 32 }
+   ::= { mplsTunnelCHopEntry 5 }
+
+mplsTunnelCHopAsNumber OBJECT-TYPE
+   SYNTAX        TeHopAddressAS
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelCHopAddrType is set to asnumber(3),
+          then this value will contain the AS number of this
+          hop. Otherwise the agent should set this object to
+          zero-length string and the manager should ignore
+          this."
+   ::= { mplsTunnelCHopEntry 6 }
+
+mplsTunnelCHopAddrUnnum OBJECT-TYPE
+   SYNTAX        TeHopAddressUnnum
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelCHopAddrType is set to unnum(4) or
+          unnumv6(6), then this value will contain the unnumbered
+          interface identifier of this hop. This object should
+          be used in conjunction with mplsTunnelCHopIpAddr
+          which would contain the LSR Router ID in this case.
+          Otherwise the agent should set this object to zero-
+          length string and the manager should ignore this."
+   ::= { mplsTunnelCHopEntry 7 }
+
+mplsTunnelCHopLspId OBJECT-TYPE
+   SYNTAX        MplsLSPID
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "If mplsTunnelCHopAddrType is set to lspid(5), then
+          this value will contain the LSP ID of this hop.
+          This object is otherwise insignificant and should
+          contain a value of 0 to indicate this fact."
+   ::= { mplsTunnelCHopEntry 8 }
+
+mplsTunnelCHopType OBJECT-TYPE
+   SYNTAX        INTEGER { strict(1),
+                           loose(2)
+                          }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Denotes whether this is tunnel hop is routed in a
+          strict or loose fashion."
+   ::= { mplsTunnelCHopEntry 9 }
+
+mplsTunnelCHopLabelStatuses OBJECT-TYPE
+   SYNTAX  BITS {
+      forwardPresent (0),
+      reversePresent (1)
+   }
+   MAX-ACCESS read-only
+   STATUS  current
+   DESCRIPTION
+     "This bitmask indicates the presence of labels indicated by the
+      mplsTunnelCHopExpLabel and mplsTunnelCHopExpRvrsLabel
+      objects.
+      A set bit indicates that a label is present for this hop in the
+      route thus allowing zero to be a valid label value."
+   ::= { mplsTunnelCHopEntry 11 }
+
+mplsTunnelCHopExpLabelType OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabelType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The C-Type of the following hop label. This field is
+        insignificant unless mplsTunnelCHopLabelStatuses has the
+        forwardPresent(0) bit set."
+   ::= { mplsTunnelCHopEntry 12 }
+
+mplsTunnelCHopExpLabel OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabel
+   MAX-ACCESS read-only
+   STATUS        current
+   DESCRIPTION
+        "The  explicit  out-segment  label  to  use  on  the
+        forward path.
+
+        When this label is used in signaling protocol messages,
+        it is copied byte for byte as is.  Therefore, if the label
+        octet string is intended to represent multibyte values, it
+        should encode those values in network (big-endian) byte
+        order.  This interpretation applies in particular to the
+        non-generalized MPLS labels (32 bits) used in ATM, FR and
+        generic MPLS networks."
+   ::= { mplsTunnelCHopEntry 13 }
+
+mplsTunnelCHopExpRvrsLabelType OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabelType
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The C-Type of the following hop label.  This field is
+         insignificant unless mplsTunnelCHopLabelStatuses has the
+         reversePresent(0) bit set."
+   ::= { mplsTunnelCHopEntry 14 }
+
+mplsTunnelCHopExpRvrsLabel OBJECT-TYPE
+   SYNTAX        MplsGeneralizedLabel
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The   explicit  in-segment  label  to  use  on  the
+        reverse path.
+
+        When this label is used in signaling protocol messages,
+        it is copied byte for byte as is.  Therefore, if the label
+        octet string is intended to represent multibyte values, it
+        should encode those values in network (big-endian) byte
+        order.  This interpretation applies in particular to the
+        non-generalized MPLS labels (32 bits) used in ATM, FR and
+        generic MPLS networks."
+   ::= { mplsTunnelCHopEntry 15 }
+
+-- End of mplsTunnelCHopTable
+
+
+-- MPLS Tunnel Performance Table.
+
+mplsTunnelPerfTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_TPRF
+   SYNTAX        SEQUENCE OF MplsTunnelPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "This table provides per-tunnel MPLS performance
+          information."
+   ::= { mplsTeObjects 9 }
+
+mplsTunnelPerfEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelPerfEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table is created by the LSR for
+          every tunnel.  Its is an extension to
+          mplsTunnelEntry."
+   AUGMENTS { mplsTunnelEntry }
+   ::= { mplsTunnelPerfTable 1 }
+
+MplsTunnelPerfEntry ::= SEQUENCE {
+      mplsTunnelPerfPackets           Counter32,
+      mplsTunnelPerfHCPackets         Counter64,
+      mplsTunnelPerfErrors            Counter32,
+      mplsTunnelPerfBytes             Counter32,
+      mplsTunnelPerfHCBytes           Counter64
+   }
+
+mplsTunnelPerfPackets OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Number of packets forwarded by the tunnel."
+   ::= { mplsTunnelPerfEntry 1 }
+
+mplsTunnelPerfHCPackets OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High capacity counter for number of packets
+          forwarded by the tunnel."
+   ::= { mplsTunnelPerfEntry 2 }
+
+mplsTunnelPerfErrors OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Number of errored packets."
+   ::= { mplsTunnelPerfEntry 3 }
+
+mplsTunnelPerfBytes OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "Number of bytes forwarded by the tunnel."
+   ::= { mplsTunnelPerfEntry 4 }
+
+mplsTunnelPerfHCBytes OBJECT-TYPE
+   SYNTAX        Counter64
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "High capacity counter for number of bytes forwarded
+          by the tunnel."
+   ::= { mplsTunnelPerfEntry 5 }
+
+-- End of mplsTunnelPerfTable
+
+
+-- CR-LDP Tunnel Resource Table
+
+mplsTunnelCRLDPResTable OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_TCRS
+   SYNTAX        SEQUENCE OF MplsTunnelCRLDPResEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelCRLDPResTable allows a manager to
+          specify which CR-LDP-specific resources are desired
+          for an MPLS tunnel if that tunnel is signaled using
+          CR-LDP. Note that these attributes are in addition
+          to those specified in mplsTunnelResourceTable. This
+          table also allows several tunnels to point to a
+          single entry in this table, implying that these
+          tunnels should share resources."
+   ::= { mplsTeObjects 10 }
+
+mplsTunnelCRLDPResEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelCRLDPResEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a set of resources
+          for an MPLS tunnel established using CRLDP
+          (mplsTunnelSignallingProto equal to crldp (3)). An
+          entry can be created by a network administrator or
+          by an SNMP agent as instructed by any MPLS
+          signaling protocol."
+   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelResourceIndex }
+      ::= { mplsTunnelCRLDPResTable 1 }
+
+MplsTunnelCRLDPResEntry ::= SEQUENCE {
+     mplsTunnelCRLDPResMeanBurstSize   MplsBurstSize,
+     mplsTunnelCRLDPResExBurstSize     MplsBurstSize,
+     mplsTunnelCRLDPResFrequency       INTEGER,
+     mplsTunnelCRLDPResWeight          Unsigned32,
+     mplsTunnelCRLDPResFlags           Unsigned32,
+     mplsTunnelCRLDPResRowStatus       RowStatus,
+     mplsTunnelCRLDPResStorageType     StorageType
+   }
+
+mplsTunnelCRLDPResMeanBurstSize OBJECT-TYPE
+   SYNTAX        MplsBurstSize
+   UNITS         "bytes"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The mean burst size in bytes."
+   DEFVAL { 0 }
+   ::= { mplsTunnelCRLDPResEntry 2 }
+
+mplsTunnelCRLDPResExBurstSize OBJECT-TYPE
+   SYNTAX        MplsBurstSize
+   UNITS         "bytes"
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+     "The Excess burst size in bytes."
+   REFERENCE
+     "CR-LDP Specification, Section 4.3."
+   ::= { mplsTunnelCRLDPResEntry 3 }
+
+mplsTunnelCRLDPResFrequency OBJECT-TYPE
+   SYNTAX  INTEGER {
+         unspecified(1),
+         frequent(2),
+         veryFrequent(3)
+      }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The granularity of the availability of committed
+          rate."
+   REFERENCE
+        "CR-LDP Specification, Section 4.3."
+   ::= { mplsTunnelCRLDPResEntry 4 }
+
+mplsTunnelCRLDPResWeight OBJECT-TYPE
+   SYNTAX        Unsigned32(0..255)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The relative weight for using excess bandwidth above
+          its committed rate.  The value of 0 means that
+          weight is not applicable for the CR-LSP."
+   DEFVAL { 0 }
+   ::= { mplsTunnelCRLDPResEntry 5 }
+
+mplsTunnelCRLDPResFlags OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..63)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "The value of the 1 byte Flags conveyed as part of
+          the traffic parameters during the establishment of
+          the CRLSP. The bits in this object are to be
+          interpreted as follows.
+
+          +==+==+==+==+==+==+==+==+
+          | Res |F6|F5|F4|F3|F2|F1|
+          +==+==+==+==+==+==+==+==+
+
+        Res - These bits are reserved. Zero on transmission.
+          Ignored on receipt.
+        F1 - Corresponds to the PDR.
+        F2 - Corresponds to the PBS.
+        F3 - Corresponds to the CDR.
+        F4 - Corresponds to the CBS.
+        F5 - Corresponds to the EBS.
+        F6 - Corresponds to the Weight.
+
+        Each flag if is a Negotiable Flag corresponding to a
+          Traffic Parameter. The Negotiable Flag value zero
+          denotes Not Negotiable and value one denotes
+          Negotiable."
+    DEFVAL { 0 }
+    ::= { mplsTunnelCRLDPResEntry 6 }
+
+mplsTunnelCRLDPResRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table."
+   ::= { mplsTunnelCRLDPResEntry 7 }
+
+mplsTunnelCRLDPResStorageType OBJECT-TYPE
+   SYNTAX        StorageType
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable indicates the storage type for this
+          object."
+   DEFVAL { 2 }
+   ::= { mplsTunnelCRLDPResEntry 8 }
+
+-- End of CR-LDP Tunnel Resource Table
+
+-- Addition
+
+-- MPLS DiffServ Table
+
+mplsDiffServIndexNextTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_DSI
+   SYNTAX        SEQUENCE OF MplsDiffServIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next available values of
+        mplsDiffServIndex for all entities."
+   ::= { mplsTeObjects 11 }
+
+mplsDiffServIndexNextEntry  OBJECT-TYPE
+   SYNTAX        MplsDiffServIndexNextEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+         mplsDiffServIndex for a specific TE-MIB entity.
+         This MIB table is indexed by the PRVT-TE-MIB entity
+         Index."
+
+   INDEX  { prvtMplsTeMibEntityIndex }
+      ::= { mplsDiffServIndexNextTable 1 }
+
+MplsDiffServIndexNextEntry ::= SEQUENCE {
+      mplsDiffServIndexNextIndex           Integer32
+    }
+
+mplsDiffServIndexNextIndex OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "This object contains the next appropriate value
+         to be used for mplsDiffServIndex when creating
+         entries in the mplsDiffServTable. If the number of
+         unassigned entries is exhausted, this object
+         will take on the value of 0.  To obtain the
+         mplsDiffServIndex value for a new entry, the
+         manager must first issue a management protocol
+         retrieval operation to obtain the current value
+         of this object. The agent should modify the
+         value to reflect the next unassigned index after
+         each retrieval operation. After a manager
+         retrieves a value the agent will determine
+         through its local policy when this index value
+         will be made available for reuse."
+::= { mplsDiffServIndexNextEntry 1 }
+
+mplsDiffServTable OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_DS
+   SYNTAX        SEQUENCE OF MplsDiffServEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsDiffServTable allows DiffServ parameters to be
+          configured for DiffServ enabled LSPs signalled by the
+          mplsTunnelTable.
+
+        If a tunnel is an E-LSP, then fields in this table must be
+          set to indicate 0 - 8 EXP->PHB maps, and the number
+          of such maps, to be used by LSRs in the E-LSP to
+          determine the PHB to apply to incoming packets.
+
+        If a tunnel is an L-LSP, then fields in this table must be
+          set to indicate the PHB Scheduling Class (PSC) to use
+          for incoming packets."
+   REFERENCE
+        "Le Faucher, et. al, MPLS Support of Differentiated
+          Services, Internet Draft <draft-ietf-mpls-diff-
+          ext-09.txt>, April 2001."
+   ::= { mplsTeObjects 12 }
+
+mplsDiffServEntry OBJECT-TYPE
+   SYNTAX        MplsDiffServEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents either a set of 0 -
+          8 EXP->PHB maps, and the number of such maps, for an
+          E-LSP or a PSC value for an L-LSP."
+   REFERENCE
+        "Le Faucher, et. al, MPLS Support of Differentiated
+          Services, Internet Draft <draft-ietf-mpls-diff-
+          ext-09.txt>, April 2001."
+   INDEX {
+      prvtMplsTeMibEntityIndex, mplsDiffServIndex
+   }
+   ::= { mplsDiffServTable 1 }
+
+MplsDiffServEntry ::= SEQUENCE {
+      mplsDiffServIndex            Integer32,
+      mplsDiffServType             INTEGER,
+      mplsDiffServLLSPPSC          Integer32,
+      mplsDiffServELSPNumPHBs      Integer32,
+      mplsDiffServELSPPHB0         Integer32,
+      mplsDiffServELSPPHB1         Integer32,
+      mplsDiffServELSPPHB2         Integer32,
+      mplsDiffServELSPPHB3         Integer32,
+      mplsDiffServELSPPHB4         Integer32,
+      mplsDiffServELSPPHB5         Integer32,
+      mplsDiffServELSPPHB6         Integer32,
+      mplsDiffServELSPPHB7         Integer32,
+      mplsDiffServRowStatus        RowStatus
+   }
+
+mplsDiffServIndex OBJECT-TYPE
+   SYNTAX        Integer32 (1..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Uniquely identifies this row."
+   ::= { mplsDiffServEntry 1 }
+
+mplsDiffServType OBJECT-TYPE
+   SYNTAX        INTEGER { elsp(0), llsp(1) }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This field must be set to indicate whether this row
+          contains parameters for an E-LSP or an L-LSP."
+   ::= { mplsDiffServEntry 2 }
+
+mplsDiffServLLSPPSC OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value l-lsp
+          (1), this field contains the16-bit encoding of the
+          PHB Scheduling Class (PSC) to be used for packets on
+          this LSP (RFC 3140)."
+   ::= { mplsDiffServEntry 3 }
+
+mplsDiffServELSPNumPHBs OBJECT-TYPE
+   SYNTAX        Integer32 (0..8)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this value indicates the number of EXP->PHB
+          maps defined in this row."
+   ::= { mplsDiffServEntry 4 }
+
+mplsDiffServELSPPHB0 OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this field contains the 16-bit encoding of the
+          PHB (RFC 3140) which is assigned to packets on this
+          LSP with the value 0 in the EXP field of their MPLS
+          shim header."
+   ::= { mplsDiffServEntry 5 }
+
+mplsDiffServELSPPHB1 OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this field contains the 16-bit encoding of the
+          PHB (RFC 3140) which is assigned to packets on this
+          LSP with the value 1 in the EXP field of their MPLS
+          shim header."
+   ::= { mplsDiffServEntry 6 }
+
+mplsDiffServELSPPHB2 OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this field contains the 16-bit encoding of the
+          PHB (RFC 3140) which is assigned to packets on this
+          LSP with the value 2 in the EXP field of their MPLS
+          shim header."
+   ::= { mplsDiffServEntry 7 }
+
+mplsDiffServELSPPHB3 OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this field contains the 16-bit encoding of the
+          PHB (RFC 3140) which is assigned to packets on this
+          LSP with the value 3 in the EXP field of their MPLS
+          shim header."
+   ::= { mplsDiffServEntry 8 }
+
+mplsDiffServELSPPHB4 OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this field contains the 16-bit encoding of the
+          PHB (RFC 3140) which is assigned to packets on this
+          LSP with the value 4 in the EXP field of their MPLS
+          shim header."
+   ::= { mplsDiffServEntry 9 }
+
+mplsDiffServELSPPHB5 OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this field contains the 16-bit encoding of the
+          PHB (RFC 3140) which is assigned to packets on this
+          LSP with the value 5 in the EXP field of their MPLS
+          shim header."
+   ::= { mplsDiffServEntry 10 }
+
+mplsDiffServELSPPHB6 OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this field contains the 16-bit encoding of the
+          PHB (RFC 3140) which is assigned to packets on this
+          LSP with the value 6 in the EXP field of their MPLS
+          shim header."
+   ::= { mplsDiffServEntry 11 }
+
+mplsDiffServELSPPHB7 OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "Valid only when mplsDiffServType takes the value e-lsp
+          (0), this field contains the 16-bit encoding of the
+          PHB (RFC 3140) which is assigned to packets on this
+          LSP with the value 7 in the EXP field of their MPLS
+          shim header."
+   ::= { mplsDiffServEntry 12 }
+
+mplsDiffServRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table."
+   ::= { mplsDiffServEntry 13 }
+
+-- End of MPLS DiffServ Table
+
+-- UNI Diversity table.
+
+prvtMplsTunnelUNIDvLstIdxNxtTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_DIVNI
+   SYNTAX        SEQUENCE OF PrvtMplsTunnelUNIDvLstIdxNxtEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table contains the next available values of
+        prvtMplsTunnelUNIDivListIdx for all entities."
+   ::= { mplsTeObjects 13 }
+
+prvtMplsTunnelUNIDvLstIdxNxtEntry OBJECT-TYPE
+   SYNTAX        PrvtMplsTunnelUNIDvLstIdxNxtEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "An entry in this table represents the next available
+        prvtMplsTunnelUNIDivListIdx for a specific TE-MIB entity.
+        This MIB table is indexed by the PRVT-TE-MIB entity Index."
+
+   INDEX  { prvtMplsTeMibEntityIndex }
+      ::= { prvtMplsTunnelUNIDvLstIdxNxtTable 1 }
+
+PrvtMplsTunnelUNIDvLstIdxNxtEntry ::= SEQUENCE {
+      prvtMplsTunnelUNIDivListIdxNext       Integer32
+    }
+
+prvtMplsTunnelUNIDivListIdxNext OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This is the next available List Index in the
+         prvtMplsTunnelUNIDiversityTable."
+
+   ::= { prvtMplsTunnelUNIDvLstIdxNxtEntry 1 }
+
+prvtMplsTunnelUNIDiversityTable OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_DIV
+   SYNTAX        SEQUENCE OF PrvtMplsTunnelUNIDiversityEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The prvtMplsTunnelUNIDiversityTable is used to indicate which
+         existing tunnels a new UNI Connection is to be diverse from.
+         This table is UNI specific.  Each
+         prvtMplsTunnelUNIDiversityTable is indexed using
+         prvtMplsTeMibEntityIndex, prvtMplsTunnelUNIDivListIdx,
+         prvtMplsTunnelUNIDivTnnlIdx.
+
+         To create a UNI tunnel to use Diversity, set up a row entry
+         in the prvtMplsTunnelUNIDiversityTable for each existing
+         tunnel that the new tunnel should be diverse from.
+
+         Then when creating the new UNI tunnel, set
+         prvtMplsTunnelUNIDiversityTableIndex in the mplsTunnelTable to
+         the list_index corresponding to the Diversity Table to be
+         used.
+
+         A diversity list is read-only if it is referenced by an
+         active row in the mplsTunnelTable that is admin_status up.
+         Under these circumstances, no individual rows/diversity
+         requirements making up the list can be added, modified or
+         deleted.
+
+         A list of diversity requirements can only be satisfied by
+         signaling if all of the referenced rows in the
+         mplsTunnelTable are oper_status up when signaling is
+         initiated.  If the requirements cannot be satisfied, any
+         tunnel attempting to use the list will remain oper_status
+         down."
+
+   ::= { mplsTeObjects 14 }
+
+prvtMplsTunnelUNIDiversityEntry  OBJECT-TYPE
+   SYNTAX        PrvtMplsTunnelUNIDiversityEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table corresponds to an entry in the mplsTunnelTable.
+         A subsequent Tunnel that references this entry will be created Diverse
+         from the tunnel row entry specified here."
+   INDEX { prvtMplsTeMibEntityIndex, prvtMplsTunnelUNIDivListIdx,
+           prvtMplsTunnelUNIDivIdx }
+      ::= { prvtMplsTunnelUNIDiversityTable 1 }
+
+PrvtMplsTunnelUNIDiversityEntry ::= SEQUENCE {
+      prvtMplsTunnelUNIDivListIdx                  Integer32,
+      prvtMplsTunnelUNIDivIdx                      Integer32,
+      prvtMplsTunnelUNIDivRowPointer               RowPointer,
+      prvtMplsTunnelOperStatus                     Integer32,
+      prvtMplsTunnelUNIDivRowStatus                RowStatus,
+      prvtMplsTunnelUNIDivRequirement              INTEGER,
+      prvtMplsTunnelUNIDivAccess                   Integer32
+   }
+
+prvtMplsTunnelUNIDivListIdx OBJECT-TYPE
+   SYNTAX         Integer32 (0..2147483647)
+   MAX-ACCESS     not-accessible
+   STATUS         current
+   DESCRIPTION
+        "Primary index into this table identifying a
+          particular list of Diversity requirements."
+   ::= { prvtMplsTunnelUNIDiversityEntry 2 }
+
+prvtMplsTunnelUNIDivIdx OBJECT-TYPE
+   SYNTAX        Integer32 (0..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "Secondary index into this table identifying a
+         Diversity requirement within the list."
+
+   ::= { prvtMplsTunnelUNIDiversityEntry 3 }
+
+prvtMplsTunnelUNIDivRowPointer OBJECT-TYPE
+   SYNTAX        RowPointer
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This field represents a pointer to the entry in the
+         mplsTunnelTable to which the Diversity requirement
+         applies.  The array of longs specified here is configured
+         as the OID of the corresponding tunnel."
+
+   ::= { prvtMplsTunnelUNIDiversityEntry 4 }
+
+prvtMplsTunnelOperStatus OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The Oper Status of the mplsTunnelTable row referred to by
+         prvtMplsTunnelUNIDivPointer.  If this tunnel is removed
+         from the mplsTunnelTable then this is set to AMB_OPER_STATUS_DOWN.
+
+         This field is used to determine whether a diversity
+         requirement can currently be satisfied by signaling."
+
+   ::= { prvtMplsTunnelUNIDiversityEntry 5 }
+
+prvtMplsTunnelUNIDivRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create or delete this row."
+   ::= { prvtMplsTunnelUNIDiversityEntry 6 }
+
+prvtMplsTunnelUNIDivRequirement OBJECT-TYPE
+   SYNTAX        INTEGER {
+         nodeDiverse(1),    -- node diverse
+         linkDiverse(2),    -- link diverse
+         srlg(3),           -- shared risk link group
+         sharedPath(4)      -- shared path
+      }
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This field indicates the Diversity Requirement for the
+         corresponding tunnel.  Once an row entry has been created
+         and is oper status 'up' for this tunnel this value cannot
+         be altered."
+
+   ::= { prvtMplsTunnelUNIDiversityEntry 7 }
+
+prvtMplsTunnelUNIDivAccess OBJECT-TYPE
+   SYNTAX        Integer32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "This field indicates the access (read-only or writable)
+         that the user has over this row entry.
+
+         The circumstances under which a row is read-only are
+         described above."
+
+   ::= { prvtMplsTunnelUNIDiversityEntry 8 }
+
+-- End of UNI Diversity table.
+
+prvtMplsTunnelTrapEnableTable OBJECT-TYPE
+   SYNTAX        SEQUENCE OF PrvtMplsTunnelTrapEnableEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The prvtMplsTunnelTrapEnable Table allows a manager to
+         enable or disable TRAPs."
+   ::= { mplsTeObjects 15 }
+
+prvtMplsTunnelTrapEnableEntry OBJECT-TYPE
+   SYNTAX        PrvtMplsTunnelTrapEnableEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table is used to configure trap support for this
+         instance of TE-MIB"
+
+   INDEX  { prvtMplsTeMibEntityIndex }
+      ::= { prvtMplsTunnelTrapEnableTable 1 }
+
+PrvtMplsTunnelTrapEnableEntry ::= SEQUENCE {
+      mplsTunnelTrapEnable             TruthValue
+    }
+
+mplsTunnelTrapEnable OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-write
+   STATUS        current
+   DESCRIPTION
+        "If this object is true, then it enables the
+          generation of mplsTunnelUp and mplsTunnelDown
+          traps, otherwise these traps are not emitted."
+   DEFVAL { false }
+   ::= { prvtMplsTunnelTrapEnableEntry 2 }
+
+-- Scalar table
+
+mplsTunnelHoldTimer OBJECT-TYPE
+    SYNTAX        Unsigned32
+  	MAX-ACCESS    read-write
+   	STATUS        current
+   	DESCRIPTION
+       "Defines a period in seconds needed to wait before rebuilding backup 
+       or primary tunnels if a frr condition occurs
+       Currently no more than 10 seconds are allowed"
+::= { mplsTeObjects 19 }
+
+-- Addition
+
+mplsTeMibEntityScalarTable  OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_SCALAR
+   SYNTAX        SEQUENCE OF MplsTeMibEntityScalarEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTeMibEntityScalarTable contains all MPLS Tunnel
+          scalars."
+   ::= { mplsTeObjects 16 }
+
+mplsTeMibEntityScalarEntry OBJECT-TYPE
+   SYNTAX        MplsTeMibEntityScalarEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTeMibEntityScalarTable contains all MPLS Tunnel
+          scalars."
+   INDEX { prvtMplsTeMibEntityIndex }
+      ::= { mplsTeMibEntityScalarTable 1 }
+
+MplsTeMibEntityScalarEntry ::= SEQUENCE {
+      mplsTunnelConfigured              Unsigned32,
+      mplsTunnelActive                  Unsigned32,
+      mplsTunnelTEDistProto             BITS,
+      mplsTunnelMaxHops                 Unsigned32,
+      mplsTunnelNotificationMaxRate     Unsigned32
+   }
+
+-- End Addition
+
+mplsTunnelConfigured OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The number of tunnels configured on this device. A
+          tunnel is considered configured if the
+          mplsTunnelRowStatus is active(1)."
+   ::= { mplsTeMibEntityScalarEntry 2 }
+
+mplsTunnelActive OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The number of tunnels active on this device. A
+          tunnel is considered active if the
+          mplsTunnelOperStatus is up(1)."
+   ::= { mplsTeMibEntityScalarEntry 3 }
+
+mplsTunnelTEDistProto OBJECT-TYPE
+   SYNTAX        BITS {
+          other (0),
+          ospf (1),
+          isis (2)
+      }
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The traffic engineering distribution protocol(s)
+          used by this LSR. Note that an LSR may support more
+          than one distribution protocol simultaneously."
+   ::= { mplsTeMibEntityScalarEntry 4 }
+
+mplsTunnelMaxHops OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+        "The maximum number of hops that can be specified for
+          a tunnel on this device."
+   ::= { mplsTeMibEntityScalarEntry 5 }
+
+mplsTunnelNotificationMaxRate OBJECT-TYPE
+   SYNTAX       Unsigned32
+   MAX-ACCESS   read-only
+   STATUS       current
+   DESCRIPTION
+        "This variable indicates the maximum number of
+          notifications issued per second. If events occur
+          more rapidly, the implementation may simply fail to
+          emit these notifications during that period, or may
+          queue them until an appropriate time. A value of 0
+          means no throttling is applied and events may be
+          notified at the rate at which they occur."
+   DEFVAL       { 0 }
+   ::= { mplsTeMibEntityScalarEntry 6 }
+
+-- PRVT-Addition
+
+-- SONET Tunnel Resource Table
+
+mplsTunnelSonetResTable OBJECT-TYPE
+-- FAMILY-SHORT-NAME MPLS_TSRS
+   SYNTAX        SEQUENCE OF MplsTunnelSonetResEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "The mplsTunnelSonetResTable allows a manager to
+          specify which Sonet-specific resources are desired
+          for an MPLS tunnel. Note that these attributes are in addition
+          to those specified in mplsTunnelResourceTable. This
+          table also allows several tunnels to point to a
+          single entry in this table, implying that these
+          tunnels should share resources."
+   ::= { mplsTeObjects 17 }
+
+mplsTunnelSonetResEntry OBJECT-TYPE
+   SYNTAX        MplsTunnelSonetResEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+        "An entry in this table represents a set of Sonet resources
+          for an MPLS tunnel.  An entry can be created by a
+          network administrator or by an SNMP agent as
+          instructed by any MPLS signaling protocol."
+   INDEX { prvtMplsTeMibEntityIndex, mplsTunnelResourceIndex }
+      ::= { mplsTunnelSonetResTable 1 }
+
+MplsTunnelSonetResEntry ::= SEQUENCE {
+      mplsTunnelSonetResRCC             Integer32,
+      mplsTunnelSonetResNCC             Unsigned32,
+      mplsTunnelSonetResNVC             Unsigned32,
+      mplsTunnelSonetResMultiplier      Unsigned32,
+      mplsTunnelSonetResTransparency    Unsigned32,
+      mplsTunnelSonetResRowStatus       RowStatus,
+      mplsTunnelSonetResSignalType      Integer32
+   }
+
+mplsTunnelSonetResRCC OBJECT-TYPE
+   SYNTAX        Integer32 (0..255)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Requested Contiguous Concatenation.  Indicates the types
+        of contiguous concatenation requested for this LSP.  This
+        field is only valid if <lsp_encoding> is SDH or SONET, and the
+        <resource_pointer> is 0.0."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelSonetResEntry 2 }
+
+mplsTunnelSonetResNCC OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..65535)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Requested Number of Contiguous Components.  Indicates the
+        number of identical SDH/SONET SPEs/VCs that are
+        requested to be concatenated, as indicated in the <rcc>
+        field.  This field is only valid if <lsp_encoding> is SDH
+        or SONET, and the <resource_pointer> is 0.0."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelSonetResEntry 3 }
+
+mplsTunnelSonetResNVC OBJECT-TYPE
+   SYNTAX        Unsigned32 (0..65535)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This field indicates the number of signals that are
+        requested to be virtually concatenated.  These signals
+        are all of the same type.  This field is valid only if
+        <lsp_encoding> is SDH or SONET, and the <resource_pointer> is 0.0."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelSonetResEntry 4 }
+
+mplsTunnelSonetResMultiplier OBJECT-TYPE
+   SYNTAX        Unsigned32 (1..65535)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This field is a bit field indicating the number of
+        identical signals that are requested for the LSP.  This
+        field is valid only if <lsp_encoding> is SDH or SONET, and the
+        <resource_pointer> is 0.0."
+   DEFVAL        { 1 }
+   ::= { mplsTunnelSonetResEntry 5 }
+
+mplsTunnelSonetResTransparency OBJECT-TYPE
+   SYNTAX        Unsigned32
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "This field is a bit field indicating the type of
+        Transparency being requested.  Several flags can be
+        combined to provide different types of transparency.  Not
+        all combinations are necessarily valid.  This field is
+        valid only if <lsp_encoding> is SDH or SONET, and the
+        <resource_pointer> is 0.0."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelSonetResEntry 6 }
+
+mplsTunnelSonetResRowStatus OBJECT-TYPE
+   SYNTAX        RowStatus
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+        "This variable is used to create, modify, and/or
+          delete a row in this table."
+   ::= { mplsTunnelSonetResEntry 7 }
+
+mplsTunnelSonetResSignalType OBJECT-TYPE
+   SYNTAX        Integer32 (0..255)
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Indicates the overhead termination type and is interpreted
+        in relation to the LSP Encoding Type."
+   DEFVAL        { 0 }
+   ::= { mplsTunnelSonetResEntry 9 }
+
+-- End of Sonet Tunnel Resource Table
+
+-- GMPLS Tunnel Error Table.
+
+mplsTunnelErrorTable  OBJECT-TYPE
+  SYNTAX  SEQUENCE OF MplsTunnelErrorEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "This table 'augments' the mplsTunnelTable.
+     This table provides per-tunnel information about errors. Errors
+     may be detected locally or reported through the signaling
+     protocol. Error reporting is not exclusive to GMPLS and this
+     table may be applied in MPLS systems."
+  REFERENCE
+    "Multiprotocol Label Switching (MPLS) Traffic Engineering (TE)
+     Management Information Base (MIB), Srinivasan, C., Viswanathan,
+     A., Nadeau, T., RFC 3812, June 2004."
+  ::= { mplsTeObjects 18 }
+
+mplsTunnelErrorEntry OBJECT-TYPE
+  SYNTAX  MplsTunnelErrorEntry
+  MAX-ACCESS not-accessible
+  STATUS  current
+  DESCRIPTION
+    "An entry in this table is created by the LSR for every tunnel
+     where error information is visible to the LSR.
+     Note that systems which read the objects in this table one at a
+     time may experience a discontinuity as the result of a new error
+     occurring in between object reads. Systems that are vulnerable
+     to this should read mplsTunnelErrorLastTime before and after
+     reading the other objects."
+  AUGMENTS { mplsTunnelEntry }
+  ::= { mplsTunnelErrorTable 1 }
+
+MplsTunnelErrorEntry ::= SEQUENCE {
+  mplsTunnelErrorLastErrorType      INTEGER,
+  mplsTunnelErrorLastTime           TimeStamp,
+  mplsTunnelErrorReporterType       InetAddressType,
+  mplsTunnelErrorReporter           InetAddress,
+  mplsTunnelErrorCode               Unsigned32,
+  mplsTunnelErrorSubcode            Unsigned32,
+  mplsTunnelErrorTLVs               OCTET STRING,
+  mplsTunnelErrorHelpString         DisplayString
+}
+
+mplsTunnelErrorLastErrorType OBJECT-TYPE
+  SYNTAX  INTEGER {
+    noError (0),
+    unknown (1),
+    protocol (2),
+    pathComputation (3),
+    localConfiguration (4),
+    localResources (5),
+    localOther (6)
+  }
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The nature of the last error. Provides interpretation context
+     for mplsTunnelErrorProtocolCode and mplsTunnelErrorProtocolSubcode.
+
+     A value of noError (0) shows that there is no error associated
+     with this tunnel and means that the other objects in this table
+     entry have no meaning.
+
+     A value of unknown (1) shows that there is an error but that no
+     additional information about the cause is known. The error may
+     have been received in a signaled message or generated locally.
+
+     A value of protocol (2) or pathComputation (3) indicates that
+     the cause of an error and identifies an error that has been
+     received through signaling or will itself be signaled.
+
+     A value of localConfiguration (4), localResources (5) or
+     localOther (6) identifies an error which has been detected
+     by the local node, but which will not be reported through
+     signaling."
+  ::= { mplsTunnelErrorEntry 1 }
+
+mplsTunnelErrorLastTime OBJECT-TYPE
+  SYNTAX  TimeStamp
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The time at which the last error occurred. This is presented as
+     the value of SysUpTime when the error occurred or was reported
+     to this node.
+     If mplsTunnelErrorLastErrorType has the value noError (0), then
+     this object is ignored."
+  ::= { mplsTunnelErrorEntry 2 }
+
+mplsTunnelErrorReporterType OBJECT-TYPE
+   SYNTAX  InetAddressType
+   MAX-ACCESS read-only
+   STATUS  current
+   DESCRIPTION
+     "The address type of the error reported.
+      This object is used to aid in interpretation of
+      mplsTunnelErrorReporter."
+  ::= { mplsTunnelErrorEntry 3 }
+
+mplsTunnelErrorReporter OBJECT-TYPE
+  SYNTAX  InetAddress
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The address of the node reporting the last error, or the address
+     of the resource (such as an interface) associated with the
+     error.
+
+     If mplsTunnelErrorLastErrorType has the value noError (0), then
+     this object is ignored.
+
+     If mplsTunnelErrorLastErrorType has the value unknown (1),
+     localConfiguration (4), localResources (5), or localOther (6)
+     this object MAY contain a zero value.
+
+     This object should be interpreted in the context of the value of
+     the object mplsTunnelErrorReporterType."
+  REFERENCE
+    "RFC3291, Textual Conventions for Internet Network Addresses,
+     Section 4. Usage Hints."
+  ::= { mplsTunnelErrorEntry 4 }
+
+mplsTunnelErrorCode OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The primary error code associated with the last error.
+     The interpretation of this error code depends on the value of
+     mplsTunnelErrorLastErrorType. If the value of
+     mplsTunnelErrorLastErrorType is noError (0) the value of this
+     object should be 0 and should be ignored. If the value of
+     mplsTunnelErrorLastErrorType is protocol (2) the error should
+     be interpreted in the context of the signling protocol
+     identified by the mplsTunnelSignallingProto object.
+
+     Values in excess 32767 of are not used by signaling protocols
+     and may safely be used as implementation-specific error codes."
+  REFERENCE
+    "1. Braden, R. (Ed.) et al., Resource ReserVation Protocol --
+        Version 1 Functional Specification, RFC 2205, September 1997.
+     2. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al.,
+        RFC 3209, December 2001.
+     3. Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L.
+        (Editor), RFC 3473, January 2003."
+  ::= { mplsTunnelErrorEntry 5 }
+
+mplsTunnelErrorSubcode OBJECT-TYPE
+  SYNTAX  Unsigned32
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The secondary error code associated with the last error and the
+     protocol used to signal this tunnel. This value is interpreted
+     in the context of the value of mplsTunnelErrorCode.
+     If the value of mplsTunnelErrorLastErrorType is noError (0) the
+     value of this object should be 0 and should be ignored."
+  REFERENCE
+    "1. Braden, R. (Ed.) et al., Resource ReserVation Protocol --
+        Version 1 Functional Specification, RFC 2205, September 1997.
+     2. RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al.,
+        RFC 3209, December 2001.
+     3. Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L.
+        (Editor), RFC 3473, January 2003."
+  ::= { mplsTunnelErrorEntry 6 }
+
+mplsTunnelErrorTLVs OBJECT-TYPE
+  SYNTAX  OCTET STRING (SIZE (0..255))
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "The sequence of interface identifier TLVs reported with the
+     error by the protocol code. The interpretation of the TLVs and
+     the encoding within the protocol are described in the
+     references. A value of zero in the first octet indicates that no
+     TLVs are present."
+   REFERENCE
+    "Generalized MPLS Signaling - RSVP-TE Extensions, Berger, L.
+     (Editor), RFC 3473, January 2003."
+  ::= { mplsTunnelErrorEntry 7 }
+
+mplsTunnelErrorHelpString OBJECT-TYPE
+  SYNTAX  DisplayString
+  MAX-ACCESS read-only
+  STATUS  current
+  DESCRIPTION
+    "A textual string containing information about the last error,
+     recovery actions and support advice. If there is no help string
+     this object contains a zero length string.
+     If the value of mplsTunnelErrorLastErrorType is noError (0)
+     this object should contain a zero length string, but may contain
+     a help string indicating that there is no error."
+  ::= { mplsTunnelErrorEntry 8 }
+
+-- End Addition
+
+-- Notifications.
+
+mplsTunnelUp NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus
+   }
+   STATUS      current
+   DESCRIPTION
+        "This notification is generated when a
+          mplsTunnelOperStatus object for one of the
+          configured tunnels is about to leave the down state
+          and transition into some other state (but not into
+          the notPresent state).  This other state is
+          indicated by the included value of
+          mplsTunnelOperStatus.
+
+          This structure is the same as the generic
+          AMB_MPLS_TUNNEL_TRAP_COMMON."
+   ::= { mplsTeNotifyPrefix 1 }
+
+mplsTunnelDown NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus
+   }
+   STATUS      current
+   DESCRIPTION
+        "This notification is generated when a
+          mplsTunnelOperStatus object for one of the
+          configured tunnels is about to enter the down state
+          from some other state (but not from the notPresent
+          state).  This other state is indicated by the
+          included value of mplsTunnelOperStatus.
+
+          This structure is the same as the generic
+          AMB_MPLS_TUNNEL_TRAP_COMMON."
+   ::= { mplsTeNotifyPrefix 2 }
+
+mplsTunnelRerouted NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus,
+      mplsTunnelARHopTableIndex
+   }
+   STATUS      current
+   DESCRIPTION
+        "This notification is generated when a tunnel is
+          rerouted. If the actual path is used, then this
+          object MAY contain the new path for this tunnel
+          some time after this trap is issued by the agent.
+
+          This structure is the same as the generic
+          AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifyPrefix 3 }
+
+mplsTunnelReoptimized NOTIFICATION-TYPE
+   OBJECTS     {
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus,
+      mplsTunnelARHopTableIndex
+   }
+   STATUS      current
+   DESCRIPTION
+        "This notification is generated when a tunnel is
+          reoptimized. If the mplsTunnelARHopTable is used,
+          then this tunnel instance's entry in the
+          mplsTunnelARHopTable MAY contain the new path for
+          this tunnel some time after this trap is issued by
+          the agent.
+
+          This structure is the same as the generic
+          AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifyPrefix 4 }
+
+-- End of notifications.
+
+
+-- Module compliance.
+
+mplsTeGroups
+   OBJECT IDENTIFIER ::= { mplsTeConformance 1 }
+
+mplsTeCompliances
+   OBJECT IDENTIFIER ::= { mplsTeConformance 2 }
+
+
+mplsTeModuleFullCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+        "Compliance statement for agents that provide full
+          support the MPLS-TE-STD-MIB module."
+
+   MODULE IF-MIB -- The Interfaces Group MIB, RFC 2863.
+      MANDATORY-GROUPS {
+         ifGeneralInformationGroup,
+         ifCounterDiscontinuityGroup
+      }
+
+   MODULE -- this module
+
+      -- The mandatory group has to be implemented by all
+      -- LSRs that originate/terminate ESLSPs/tunnels.
+      -- In addition, depending on the type of tunnels
+      -- supported, other groups become mandatory as
+      -- explained below.
+
+      MANDATORY-GROUPS    {
+         mplsTunnelGroup,
+         mplsTunnelScalarGroup
+      }
+
+      GROUP mplsTunnelManualGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           manual configuration of tunnels."
+
+      GROUP mplsTunnelSignaledGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           signaled tunnel set up."
+
+      GROUP mplsTunnelIsNotIntfcGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           tunnels that are not interfaces."
+
+      GROUP mplsTunnelIsIntfcGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           tunnels that are interfaces."
+
+      GROUP mplsTunnelCRLDPResOptionalGroup
+      DESCRIPTION
+          "Objects in this group are required by
+           implementations supporting the CR-LDP protocol for
+           signalling of TE tunnels."
+
+      GROUP       mplsTunnelSonetGroup
+      DESCRIPTION
+          "Set of objects needed to implement Sonet."
+
+      GROUP       mplsTunnelUniGroup
+      DESCRIPTION
+          "Set of objects needed to implement UNI."
+
+      GROUP       mplsTunnelBackupGroup
+      DESCRIPTION
+         "Set of objects needed for backup tunnels."
+
+      GROUP       mplsTunnelARHopGroup
+      DESCRIPTION
+         "Set of objects relating to ARHop."
+
+      GROUP       mplsTunnelCHopGroup
+      DESCRIPTION
+         "Set of objects relating to CHop."
+
+      GROUP       mplsDiffServGroup
+      DESCRIPTION
+         "Set of objects relating to DiffServ."
+
+      GROUP mplsTeNotificationGroup
+      DESCRIPTION "This group is mandatory for those implementations
+                   which can implement the notifications
+                   contained in this group."
+
+      OBJECT       mplsTunnelRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6)
+                             }
+      DESCRIPTION "Support for createAndWait and notReady is not
+                   required."
+
+      OBJECT      mplsTunnelHopRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6)
+                             }
+      DESCRIPTION "Support for createAndWait and notReady is not
+                   required."
+
+      OBJECT      mplsTunnelCRLDPResRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndGo(4), destroy(6)
+                             }
+      DESCRIPTION "Support for createAndWait and notReady is
+                   not required."
+
+   ::= { mplsTeCompliances 1 }
+
+-- Compliance requirement for read-only implementations.
+
+mplsTeModuleReadOnlyCompliance MODULE-COMPLIANCE
+   STATUS current
+   DESCRIPTION
+        "Compliance requirement for implementations that only
+          provide read-only support for MPLS-TE-STD-MIB.
+          Such devices can then be monitored but cannot be
+          configured using this MIB modules."
+
+   MODULE -- this module
+
+      -- mplsTunnelTable
+
+      MANDATORY-GROUPS    {
+         mplsTunnelGroup,
+         mplsTunnelScalarGroup
+      }
+
+      GROUP mplsTunnelManualGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           manual configuration of tunnels."
+
+      GROUP mplsTunnelSignaledGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           signaled tunnel set up."
+
+      GROUP mplsTunnelIsNotIntfcGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           tunnels that are not interfaces."
+
+      GROUP mplsTunnelIsIntfcGroup
+      DESCRIPTION
+          "This group is mandatory for devices which support
+           tunnels that are interfaces."
+
+      GROUP mplsTunnelCRLDPResOptionalGroup
+      DESCRIPTION
+          "Objects in this group are required by
+           implementations supporting the CR-LDP protocol for
+           signalling of TE tunnels."
+
+      GROUP mplsTeNotificationGroup
+      DESCRIPTION "This group is mandatory for those implementations
+                   which can implement the notifications
+                   contained in this group."
+
+      -- mplsTunnelTable
+
+      OBJECT      mplsTunnelName
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelDescr
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelIsIf
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelIfIndex
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelXCPointer
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelSignallingProto
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelSetupPrio
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHoldingPrio
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelSessionAttributes
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelLocalProtectInUse
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourcePointer
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelInstancePriority
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopTableIndex
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelIncludeAnyAffinity
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelIncludeAllAffinity
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelExcludeAnyAffinity
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelPathInUse
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelRole
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelAdminStatus
+      SYNTAX      INTEGER { up (1), down (2) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Only up and down states must be supported. Write
+           access is not required."
+
+      OBJECT      mplsTunnelRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- mplsTunnelHopTable
+
+      OBJECT      mplsTunnelHopAddrType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopIpAddr
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopIpPrefixLen
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopAddrUnnum
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopAsNumber
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopLspId
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopType
+      SYNTAX      INTEGER { strict(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "loose(2) need not be supported. Write access is
+           not required."
+
+      OBJECT      mplsTunnelHopInclude
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopPathOptionName
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopEntryPathComp
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelHopStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- mplsTunnelResourceTable
+
+      OBJECT      mplsTunnelResourceMaxRate
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceMeanRate
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceMaxBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceMeanBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceExBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceFrequency
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceWeight
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelResourceStorageType
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      -- mplsTunnelCRLDPResTable
+
+      OBJECT      mplsTunnelCRLDPResMeanBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResExBurstSize
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResFrequency
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResWeight
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResFlags
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResRowStatus
+      SYNTAX      RowStatus { active(1) }
+      MIN-ACCESS  read-only
+      DESCRIPTION
+          "Write access is not required."
+
+      OBJECT      mplsTunnelCRLDPResStorageType
+      MIN-ACCESS   read-only
+      DESCRIPTION
+          "Write access is not required."
+
+   ::= { mplsTeCompliances 2 }
+
+
+-- Units of conformance.
+
+mplsTunnelGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelIndexNextIndex,
+      mplsTunnelName,
+      mplsTunnelDescr,
+      mplsTunnelOwner,
+      mplsTunnelXCPointer,
+      mplsTunnelIfIndex,
+      mplsTunnelHopTableIndex,
+      mplsTunnelARHopTableIndex,
+      mplsTunnelCHopTableIndex,
+      mplsTunnelAdminStatus,
+      mplsTunnelOperStatus,
+      mplsTunnelRowStatus,
+      mplsTunnelStorageType,
+      mplsTunnelDirection,
+      mplsTunnelLSPEncoding,
+      mplsTunnelLinkProtection,
+      mplsTunnelGPid,
+      mplsTunnelUseEgressLabel,
+      mplsTunnelEgressLabel,
+      mplsTunnelEgressLabelType,
+      mplsTunnelOmitEROIfOneHop,
+      mplsTunnelPrivateData,
+      mplsTunnelSrcTNAAddressType,
+      mplsTunnelSrcTNAAddress,
+      mplsTunnelDestTNAAddressType,
+      mplsTunnelDestTNAAddress,
+      mplsTunnelSecondary,
+      mplsTunnelUnnumIf,
+      mplsTunnelAttributes,
+      mplsTunnelEndToEndRerouting,
+      mplsTunnelIsUni,
+      mplsTunnelUniServiceLevel,
+      mplsTunnelUniEgressLabel,
+      mplsTunnelUniEgressLabelType,
+      mplsTunnelUniEgressLabelPort,
+      mplsTunnelUniRvsEgressLabel,
+      mplsTunnelUniRvsEgressLabelType,
+      mplsTunnelUniRvsEgressLabelPort,
+      mplsTunnelSwitchingType,
+      mplsTunnelDeletionMode,
+      mplsTunnelUniDiversityListIndex,
+      mplsTunnelDiffServIndex,
+      mplsTunnelReversePrivateData,
+      mplsTunnelAdminStatusFlags,
+      mplsTunnelFastRerouteMode,
+      mplsTunnelBackupSetupPrio,
+      mplsTunnelBackupHoldingPriority,
+      mplsTunnelBackupIncAny,
+      mplsTunnelBackupIncAll,
+      mplsTunnelBackupExcAny,
+      mplsTunnelBackupBandwidth,
+      mplsTunnelBackupMaxHops,
+      mplsTunnelDownNotRecipType,
+      mplsTunnelDownNotRecip,
+      mplsTunnelPathComp,
+      mplsTunnelUpNotRecipType,
+      mplsTunnelUpNotRecip,
+      mplsTunnelExtraParamsPtr,
+      mplsTunnelIsSpc,
+      mplsTunnelUniIngressLabel,
+      mplsTunnelUniIngressLabelType,
+      mplsTunnelUniIngressLabelPort,
+      mplsTunnelUniRvsIngrLabel,
+      mplsTunnelUniRvsIngrLabelType,
+      mplsTunnelUniRvsIngrLabelPort,
+      mplsTunnelDiffServClassType,
+      mplsTunnelExtendedProtection,
+      mplsTunnelProtecting,
+      mplsTunnelNotification,
+      mplsTunnelLspProtection,
+      mplsTunnelAssociatedLspId,
+      mplsTunnelCallIdType,
+      mplsTunnelCallId,
+      mplsTunnelIsIpv6,
+      mplsTunnelConfigured,
+      mplsTunnelActive,
+      mplsTunnelPrimaryInstance,
+      mplsTunnelPrimaryUpTime,
+      mplsTunnelPathChanges,
+      mplsTunnelLastPathChange,
+      mplsTunnelCreationTime,
+      mplsTunnelStateTransitions,
+      mplsTunnelIncludeAnyAffinity,
+      mplsTunnelIncludeAllAffinity,
+      mplsTunnelExcludeAnyAffinity,
+--      mplsTunnelPerfPackets,
+--      mplsTunnelPerfHCPackets,
+--      mplsTunnelPerfErrors,
+--      mplsTunnelPerfBytes,
+--      mplsTunnelPerfHCBytes,
+      mplsTunnelResourcePointer,
+      mplsTunnelInstancePriority,
+      mplsTunnelPathInUse,
+      mplsTunnelRole,
+      mplsTunnelTotalUpTime,
+      mplsTunnelInstanceUpTime,
+      mplsTunnelResourceMaxRate,
+      mplsTunnelResourceMeanRate,
+      mplsTunnelResourceMaxBurstSize,
+      mplsTunnelResourceMeanBurstSize,
+      mplsTunnelResourceExBurstSize,
+      mplsTunnelResourceFrequency,
+      mplsTunnelResourceWeight,
+      mplsTunnelResourceRowStatus,
+      mplsTunnelResourceStorageType,
+      mplsTunnelResourceIndexNextIndex,
+      mplsTunnelSonetResRCC,
+      mplsTunnelSonetResNCC,
+      mplsTunnelSonetResNVC,
+      mplsTunnelSonetResMultiplier,
+      mplsTunnelSonetResTransparency,
+      mplsTunnelSonetResRowStatus,
+      mplsTunnelARHopAddrType,
+      mplsTunnelARHopIpAddr,
+      mplsTunnelARHopAddrUnnum,
+      mplsTunnelARHopLspId,
+      mplsTunnelCHopAddrType,
+      mplsTunnelCHopIpAddr,
+      mplsTunnelCHopIpPrefixLen,
+      mplsTunnelCHopAsNumber,
+      mplsTunnelCHopAddrUnnum,
+      mplsTunnelCHopLspId,
+      mplsTunnelCHopType,
+      mplsTunnelTrapEnable,
+      mplsTunnelErrorLastErrorType,
+      mplsTunnelErrorLastTime,
+      mplsTunnelErrorReporterType,
+      mplsTunnelErrorReporter,
+      mplsTunnelErrorCode,
+      mplsTunnelErrorSubcode,
+      mplsTunnelErrorTLVs,
+      mplsTunnelErrorHelpString
+   }
+   STATUS  current
+   DESCRIPTION
+        "Necessary, but not sufficient, set of objects to
+          implement tunnels.  In addition, depending on the
+          type of the tunnels supported (for example,
+          manually configured or signaled, persistent or non-
+          persistent, etc.), the following other groups
+          defined below are mandatory: mplsTunnelManualGroup
+          and/or mplsTunnelSignaledGroup,
+          mplsTunnelIsNotIntfcGroup and/or
+          mplsTunnelIsIntfcGroup."
+   ::= { mplsTeGroups 1 }
+
+mplsTunnelManualGroup  OBJECT-GROUP
+   OBJECTS { mplsTunnelSignallingProto }
+   STATUS  current
+   DESCRIPTION
+        "Object(s) needed to implement manually configured
+          tunnels."
+   ::= { mplsTeGroups 2 }
+
+mplsTunnelSignaledGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelSetupPrio,
+      mplsTunnelHoldingPrio,
+      mplsTunnelSignallingProto,
+      mplsTunnelLocalProtectInUse,
+      mplsTunnelSessionAttributes,
+      mplsTunnelHopAddrType,
+      mplsTunnelHopIpAddr,
+      mplsTunnelHopIpPrefixLen,
+      mplsTunnelHopAddrUnnum,
+      mplsTunnelHopAsNumber,
+      mplsTunnelHopLspId,
+      mplsTunnelHopType,
+      mplsTunnelHopInclude,
+      mplsTunnelHopPathOptionName,
+      mplsTunnelHopEntryPathComp,
+      mplsTunnelHopRowStatus,
+      mplsTunnelHopStorageType,
+      mplsTunnelHopLabelStatuses,
+      mplsTunnelHopExpLabelType,
+      mplsTunnelHopExpLabel,
+      mplsTunnelHopExpRvrsLabelType,
+      mplsTunnelHopExpRvrsLabel,
+      mplsTunnelHopIndexNextIndex
+   }
+   STATUS  current
+   DESCRIPTION
+        "Objects needed to implement signaled tunnels."
+   ::= { mplsTeGroups 3 }
+
+mplsTunnelScalarGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelConfigured,
+      mplsTunnelActive,
+      mplsTunnelTEDistProto,
+      mplsTunnelMaxHops,
+      mplsTunnelNotificationMaxRate
+   }
+   STATUS  current
+   DESCRIPTION
+        "Scalar object needed to implement MPLS tunnels."
+   ::= { mplsTeGroups 4 }
+
+mplsTunnelIsIntfcGroup OBJECT-GROUP
+   OBJECTS { mplsTunnelIsIf }
+   STATUS  current
+   DESCRIPTION
+        "Objects needed to implement tunnels that are
+          interfaces."
+   ::= { mplsTeGroups 5 }
+
+mplsTunnelIsNotIntfcGroup OBJECT-GROUP
+   OBJECTS { mplsTunnelIsIf }
+   STATUS  current
+   DESCRIPTION
+        "Objects needed to implement tunnels that are not
+          interfaces."
+   ::= { mplsTeGroups 6 }
+
+mplsTunnelCRLDPResOptionalGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelCRLDPResMeanBurstSize,
+      mplsTunnelCRLDPResExBurstSize,
+      mplsTunnelCRLDPResFrequency,
+      mplsTunnelCRLDPResWeight,
+      mplsTunnelCRLDPResFlags,
+      mplsTunnelCRLDPResRowStatus,
+      mplsTunnelCRLDPResStorageType
+   }
+   STATUS  current
+   DESCRIPTION
+        "Set of objects implemented for resources applicable
+          for tunnels signaled using CR-LDP."
+   ::= { mplsTeGroups 7 }
+
+
+mplsTunnelSonetGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelSonetResSignalType,
+      mplsTunnelSonetResRCC,
+      mplsTunnelSonetResNCC,
+      mplsTunnelSonetResNVC,
+      mplsTunnelSonetResMultiplier,
+      mplsTunnelSonetResTransparency
+   }
+   STATUS  current
+   DESCRIPTION
+        "Set of objects needed to implement Sonet.
+          None of these objects are mandatory."
+   ::= { mplsTeGroups 8 }
+
+mplsTunnelUniGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelIsUni,
+      mplsTunnelUniServiceLevel,
+      mplsTunnelUniEgressLabel,
+      mplsTunnelUniEgressLabelType,
+      mplsTunnelUniEgressLabelPort,
+      mplsTunnelUniRvsEgressLabel,
+      mplsTunnelUniRvsEgressLabelType,
+      mplsTunnelUniRvsEgressLabelPort,
+      mplsTunnelUniDiversityListIndex,
+      mplsTunnelUniIngressLabelType,
+      mplsTunnelUniIngressLabelPort,
+      mplsTunnelUniIngressLabel,
+      mplsTunnelUniRvsIngrLabel,
+      mplsTunnelUniRvsIngrLabelType,
+      mplsTunnelUniRvsIngrLabelPort
+   }
+   STATUS  current
+   DESCRIPTION
+        "Set of objects needed to implement UNI.
+          None of these objects are mandatory."
+   ::= { mplsTeGroups 9 }
+
+-- mplsTunnelUniDivGroup OBJECT-GROUP
+--   OBJECTS {
+--      prvtMplsTunnelUNIDivListIdxNext,
+--      prvtMplsTunnelUNIDivRowPointer,
+--      prvtMplsTunnelOperStatus,
+--      prvtMplsTunnelUNIDivRowStatus,
+--      prvtMplsTunnelUNIDivRequirement,
+--      prvtMplsTunnelUNIDivAccess
+--   }
+--   STATUS  current
+--   DESCRIPTION
+--        "Set of objects needed to implement UNI Diversity.
+--          None of these objects are mandatory."
+--   ::= { mplsTeGroups 10 }
+
+mplsTunnelBackupGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelBackupSetupPrio,
+      mplsTunnelBackupHoldingPriority,
+      mplsTunnelBackupIncAny,
+      mplsTunnelBackupIncAll,
+      mplsTunnelBackupExcAny,
+      mplsTunnelBackupBandwidth,
+      mplsTunnelBackupMaxHops
+   }
+   STATUS  current
+   DESCRIPTION
+        "Set of objects needed for backup tunnels.
+          None of these objects are mandatory."
+   ::= { mplsTeGroups 11 }
+
+mplsTunnelARHopGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelARHopAddrType,
+      mplsTunnelARHopIpAddr,
+      mplsTunnelARHopAddrUnnum,
+      mplsTunnelARHopLspId,
+      mplsTunnelARHopLabelStatuses,
+      mplsTunnelARHopExpLabelType,
+      mplsTunnelARHopExpLabel,
+      mplsTunnelARHopExpRvrsLabel,
+      mplsTunnelARHopExpRvrsLabelType,
+      mplsTunnelARHopProtection
+    }
+    STATUS  current
+    DESCRIPTION
+         "Set of objects relating to ARHop.
+           None of these objects are mandatory."
+    ::= { mplsTeGroups 12 }
+
+mplsTunnelCHopGroup OBJECT-GROUP
+   OBJECTS {
+      mplsTunnelCHopAddrType,
+      mplsTunnelCHopIpAddr,
+      mplsTunnelCHopIpPrefixLen,
+      mplsTunnelCHopAsNumber,
+      mplsTunnelCHopAddrUnnum,
+      mplsTunnelCHopLspId,
+      mplsTunnelCHopType,
+      mplsTunnelCHopLabelStatuses,
+      mplsTunnelCHopExpLabelType,
+      mplsTunnelCHopExpLabel,
+      mplsTunnelCHopExpRvrsLabelType,
+      mplsTunnelCHopExpRvrsLabel
+    }
+    STATUS  current
+    DESCRIPTION
+         "Set of objects relating to CHop.
+           None of these objects are mandatory."
+    ::= { mplsTeGroups 13 }
+
+mplsDiffServGroup OBJECT-GROUP
+   OBJECTS {
+      mplsDiffServIndexNextIndex,
+      mplsDiffServType,
+      mplsDiffServLLSPPSC,
+      mplsDiffServELSPNumPHBs,
+      mplsDiffServELSPPHB0,
+      mplsDiffServELSPPHB1,
+      mplsDiffServELSPPHB2,
+      mplsDiffServELSPPHB3,
+      mplsDiffServELSPPHB4,
+      mplsDiffServELSPPHB5,
+      mplsDiffServELSPPHB6,
+      mplsDiffServELSPPHB7,
+      mplsDiffServRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+         "Set of objects relating to DiffServ.
+            None of these objects are mandatory."
+    ::= { mplsTeGroups 14 }
+
+mplsTeNotificationGroup NOTIFICATION-GROUP
+   NOTIFICATIONS {
+      mplsTunnelUp,
+      mplsTunnelDown,
+      mplsTunnelRerouted,
+      mplsTunnelReoptimized
+   }
+   STATUS  current
+   DESCRIPTION
+        "Set of notifications implemented in this module.
+          None is mandatory."
+   ::= { mplsTeGroups 15 }
+
+-- End of MPLS-TE-MIB
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-MST-MIB b/MIBS/telco-systems/binos/PRVT-MST-MIB
new file mode 100644
index 0000000..fb3cca5
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-MST-MIB
@@ -0,0 +1,1012 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-MST-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-MST-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Counter32,
+Integer32,
+NOTIFICATION-TYPE
+FROM SNMPv2-SMI
+
+MODULE-COMPLIANCE,
+OBJECT-GROUP,
+NOTIFICATION-GROUP
+FROM SNMPv2-CONF
+
+TruthValue,
+TimeStamp,
+DisplayString
+FROM SNMPv2-TC
+
+dot1dStpPortEntry,
+Timeout,
+BridgeId,
+dot1dBasePort
+FROM BRIDGE-MIB
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+prvtMSTMib MODULE-IDENTITY
+LAST-UPDATED "200502160000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+DESCRIPTION
+"The MIB module for managing 802.1s
+Multiple Spanning Tree Protocol (MSTP)."
+
+-- revision history
+REVISION "200502160000Z"
+DESCRIPTION
+"Fixed spelling errors and changed the contact info."
+
+::= { switch 107 }
+
+prvtMSTNotifications OBJECT IDENTIFIER ::= { prvtMSTMib 0 }
+prvtMSTObjects OBJECT IDENTIFIER ::= { prvtMSTMib 1 }
+
+mSTRegion OBJECT IDENTIFIER ::= { prvtMSTObjects 1 }
+mSTBridgeParams OBJECT IDENTIFIER ::= { prvtMSTObjects 2 }
+mSTTimers OBJECT IDENTIFIER ::= { prvtMSTObjects 3 }
+mSTPort OBJECT IDENTIFIER ::= { prvtMSTObjects 4 }
+
+--
+-- Multiple Spanning Tree region objects
+--
+mSTRegionEditControl OBJECT IDENTIFIER ::= { mSTRegion 1 }
+mSTRegionParameters OBJECT IDENTIFIER ::= { mSTRegion 2 }
+
+mSTRegionEditBufferStatus OBJECT-TYPE
+SYNTAX INTEGER {
+released(1),
+acquiredBySnmp(2),
+acquiredByNonSnmp(3)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Indicates the current ownership status of the unique
+Region Config Edit Buffer.
+
+released -- the Edit Buffer can be acquired by any of
+the SNMP management stations.
+
+acquiredBySnmp -- the Edit Buffer is acquired by
+any of the SNMP management stations.
+
+acquiredByNonSnmp -- the Edit Buffer is acquired by the
+non-SNMP users managing the device."
+::= { mSTRegionEditControl 1 }
+
+mSTRegionEditBufferOperation OBJECT-TYPE
+SYNTAX INTEGER {
+other(1), -- read-only
+acquire(2),
+releaseWithForce(3),
+commit(4),
+rollBack(5)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Indicates the operation that is performed on the Region
+Config Edit Buffer.
+
+other -- none of the following operations.
+
+acquire -- acquire the Edit Buffer. This operation can
+only be performed when the mSTRegionEditBufferStatus
+object has the value of
+released(1). After the successful execution of
+this action, the mSTRegionEditBufferStatus object
+will be changed to acquiredBySnmp(2).
+
+releaseWithForce -- release the Edit Buffer acquired by
+non-SNMP users with force and discard the changes
+in the Edit Buffer. This operation can only be
+performed when the mSTRegionEditBufferStatus object
+has the value of acquiredByNonSnmp(2).
+
+commit -- commit the changes in the Edit Buffer
+and release the Edit Buffer. The successful
+execution of this action will make the changes
+in the Edit Buffer effective on the device.
+This operation can only be performed when the
+mSTRegionEditBufferStatus object has the
+value of acquiredBySnmp(3).
+
+rollBack -- discard the changes in the Edit Buffer
+and release the Edit Buffer. This operation can
+only be performed when the mSTRegionEditBufferStatus
+object has the value of acquiredBySnmp(3).
+
+This object always returns other(1) when it is read."
+::= { mSTRegionEditControl 2 }
+
+mSTRegionName OBJECT-TYPE
+SYNTAX DisplayString (SIZE(0..32))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The operational MST region name."
+::= { mSTRegionParameters 1}
+
+mSTRegionEditName OBJECT-TYPE
+SYNTAX DisplayString (SIZE(0..32))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The MST region name in the Edit Buffer.
+
+This object is only instantiated when the
+mSTRegionEditBufferStatus object has the value of
+acquiredBySnmp(2)."
+::= { mSTRegionParameters 2 }
+
+mSTRegionRevision OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The operational MST region version."
+::= { mSTRegionParameters 3 }
+
+mSTRegionEditRevision OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The MST region version in the Edit Buffer. This object is
+only instantiated when the mSTRegionEditBufferStatus object
+has the value of acquiredBySnmp(2)."
+::= { mSTRegionParameters 4 }
+
+mSTInstanceVlanTable OBJECT-TYPE
+SYNTAX SEQUENCE OF MSTInstanceVlanEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains MST instance information with
+one entry for each MST instance numbered from 0
+to mSTMaxInstanceNumber."
+::= {mSTRegionParameters 5 }
+
+mSTInstanceVlanEntry OBJECT-TYPE
+SYNTAX MSTInstanceVlanEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A conceptual row containing the MST instance
+information."
+INDEX { mSTInstanceIndex }
+::= { mSTInstanceVlanTable 1 }
+
+MSTInstanceVlanEntry ::= SEQUENCE {
+mSTInstanceIndex Integer32,
+mSTInstanceVlansMapped OCTET STRING,
+mSTInstanceVlansMapped2k OCTET STRING,
+mSTInstanceVlansMapped3k OCTET STRING,
+mSTInstanceVlansMapped4k OCTET STRING
+}
+
+mSTInstanceIndex OBJECT-TYPE
+SYNTAX Integer32 (0..256)
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"An integer that uniquely identifies an MST instance
+from 0 to the object value of mSTMaxInstanceNumber."
+::= {mSTInstanceVlanEntry 1 }
+
+mSTInstanceVlansMapped OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..128))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"A string of octets containing one bit per VLAN. The
+first octet corresponds to VLANs with VlanIndex values
+of 0 through 7; the second octet to VLANs 8 through
+15; etc. The least significant bit of each octet
+corresponds to the lowest value VlanIndex in that octet.
+
+For each VLAN, if it is mapped to this MST instance,
+then the bit corresponding to that VLAN is set to '1'."
+::= {mSTInstanceVlanEntry 2 }
+
+mSTInstanceVlansMapped2k OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..128))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"A string of octets containing one bit per VLAN for
+VLANs with VlanIndex values of 1024 through 2047. The
+first octet corresponds to VLANs with VlanIndex values
+of 1024 through 1031; the second octet to VLANs 1032
+through 1039; etc. The least significant bit of each
+octet corresponds to the lowest value VlanIndex in that
+octet.
+
+For each VLAN, if it is mapped to this MST instance,
+then the bit corresponding to that VLAN is set to '1'."
+::= {mSTInstanceVlanEntry 3 }
+
+mSTInstanceVlansMapped3k OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..128))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"A string of octets containing one bit per VLAN for
+VLANs with VlanIndex values of 2048 through 3071. The
+first octet corresponds to VLANs with VlanIndex values
+of 2048 through 2055; the second octet to VLANs 2056
+through 2063; etc. The least significant bit of each
+octet corresponds to the lowest value VlanIndex in that
+octet.
+
+For each VLAN, if it is mapped to this MST instance,
+then the bit corresponding to that VLAN is set to '1'."
+::= {mSTInstanceVlanEntry 4 }
+
+mSTInstanceVlansMapped4k OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..128))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"A string of octets containing one bit per VLAN for
+VLANs with VlanIndex values of 3072 through 4095. The
+first octet corresponds to VLANs with VlanIndex values
+of 3072 through 3079; the second octet to VLANs 3080
+through 3087; etc. The least significant bit of each
+octet corresponds to the lowest value VlanIndex in that
+octet.
+
+For each VLAN, if it is mapped to this MST instance,
+then the bit corresponding to that VLAN is set to '1'."
+::= {mSTInstanceVlanEntry 5 }
+
+mSTInstanceVlanEditTable OBJECT-TYPE
+SYNTAX SEQUENCE OF MSTInstanceVlanEditEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains MST instance information in the
+Edit Buffer with one entry for each MST
+instance numbered from 0 to mSTMaxInstanceNumber.
+
+This table is only instantiated when the
+mSTRegionEditBufferStatus object has the value of
+acquiredBySnmp(2)."
+::= { mSTRegionParameters 6 }
+
+mSTInstanceVlanEditEntry OBJECT-TYPE
+SYNTAX MSTInstanceVlanEditEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A conceptual row containing MST instance information
+in the Edit Buffer."
+INDEX { mSTInstanceIndex }
+::= { mSTInstanceVlanEditTable 1 }
+
+MSTInstanceVlanEditEntry ::= SEQUENCE {
+mSTInstanceEditVlansMap OCTET STRING,
+mSTInstanceEditVlansMap2k OCTET STRING,
+mSTInstanceEditVlansMap3k OCTET STRING,
+mSTInstanceEditVlansMap4k OCTET STRING
+}
+
+mSTInstanceEditVlansMap OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..128))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A string of octets containing one bit per VLAN. The
+first octet corresponds to VLANs with VlanIndex values
+of 0 through 7; the second octet to VLANs 8 through
+15; etc. The least significant bit of each octet
+corresponds to the lowest value VlanIndex in that octet.
+
+For each VLAN, if it is mapped to this MST instance,
+then the bit corresponding to that VLAN is set to
+'1'. Each VLAN can only be mapped to one unique MST
+instance in the range from 1 to mSTMaxInstanceNumber.
+If the bit corresponding to a VLAN is changed from '1'
+to '0', then that VLAN will be automatically mapped to
+MST instance 0 by the device."
+::= {mSTInstanceVlanEditEntry 1 }
+
+mSTInstanceEditVlansMap2k OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..128))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A string of octets containing one bit per VLAN for
+VLANs with VlanIndex values of 1024 through 2047.
+The first octet corresponds to VLANs with VlanIndex values
+of 1024 through 1031; the second octet to VLANs 1032 through 1039; etc.
+The least significant bit of each
+octet corresponds to the lowest value VlanIndex in that
+octet.
+
+For each VLAN, if it is mapped to this MST instance,
+then the bit corresponding to that VLAN is set to
+'1'. Each VLAN can only be mapped to one unique MST
+instance in the range from 1 to mSTMaxInstanceNumber.
+If the bit corresponding to a VLAN is changed from '1'
+to '0', then that VLAN will be automatically mapped to
+MST instance 0 by the device."
+::= {mSTInstanceVlanEditEntry 2 }
+
+mSTInstanceEditVlansMap3k OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..128))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A string of octets containing one bit per VLAN for
+VLANs with VlanIndex values of 2048 through 3071. The
+first octet corresponds to VLANs with VlanIndex values
+of 2048 through 2055; the second octet to VLANs 2056
+through 2063; etc. The least significant bit of each
+octet corresponds to the lowest value VlanIndex in that
+octet.
+
+For each VLAN, if it is mapped to this MST instance,
+then the bit corresponding to that VLAN is set to
+'1'. Each VLAN can only be mapped to one unique MST
+instance in the range from 1 to mSTMaxInstanceNumber.
+If the bit corresponding to a VLAN is changed from '1'
+to '0', then that VLAN will be automatically mapped to
+MST instance 0 by the device."
+::= {mSTInstanceVlanEditEntry 3 }
+
+mSTInstanceEditVlansMap4k OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (0..128))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"A string of octets containing one bit per VLAN for
+VLANs with VlanIndex values of 3072 through 4095. The
+first octet corresponds to VLANs with VlanIndex values
+of 3072 through 3079; the second octet to VLANs 3080
+through 3087; etc. The least significant bit of each
+octet corresponds to the lowest value VlanIndex in that
+octet.
+
+For each VLAN, if it is mapped to this MST instance,
+then the bit corresponding to that VLAN is set to
+'1'. Each VLAN can only be mapped to one unique MST
+instance in the range from 1 to mSTMaxInstanceNumber.
+If the bit corresponding to a VLAN is changed from '1'
+to '0', then that VLAN will be automatically mapped to
+MST instance 0 by the device."
+::= {mSTInstanceVlanEditEntry 4 }
+
+--
+-- Multiple Spanning Tree bridge parametrs
+--
+mSTMaxHopCount OBJECT-TYPE
+SYNTAX Integer32 (1..40)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The maximum number of hops for the MST region."
+::= { mSTBridgeParams 1 }
+
+mSTMaxInstanceNumber OBJECT-TYPE
+SYNTAX Integer32 (1..256)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The maximum MST (Multiple Spanning Tree) instance IDs
+that are supported by the device for the MST Protocol."
+::= { mSTBridgeParams 2 }
+
+mSTInstanceTable OBJECT-TYPE
+SYNTAX SEQUENCE OF MSTInstanceEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains MST instance information with
+one entry for each MST instance numbered from 0
+to mSTMaxInstanceNumber."
+::= {mSTBridgeParams 3 }
+
+mSTInstanceEntry OBJECT-TYPE
+SYNTAX MSTInstanceEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A conceptual row containing the MST instance
+information."
+INDEX { mSTInstanceIndex }
+::= { mSTInstanceTable 1 }
+
+MSTInstanceEntry ::= SEQUENCE {
+mSTInstanceDesignatedRoot BridgeId,
+mSTInstanceRootCost Integer32,
+mSTInstanceRootPort Integer32,
+mSTInstanceDesignatedBridge BridgeId,
+mSTInstanceRootPriority Integer32,
+mSTInstanceRemainingHopCount Integer32,
+mSTInstancePriority Integer32
+}
+
+mSTInstanceDesignatedRoot OBJECT-TYPE
+SYNTAX BridgeId
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The unique MST Bridge Identifier of the Bridge
+recorded as the Root in the Configuration BPDUs
+transmitted by the Designated Bridge for the
+segment to which the port is attached."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.4"
+::= { mSTInstanceEntry 1 }
+
+mSTInstanceRootCost OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The path cost of the root Port of this MST. This value is
+compared to the Root Path Cost field in received
+bridge PDUs."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.5"
+::= { mSTInstanceEntry 2 }
+
+mSTInstanceRootPort OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The root port of this MST."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.6"
+::= { mSTInstanceEntry 3 }
+
+
+mSTInstanceDesignatedBridge OBJECT-TYPE
+SYNTAX BridgeId
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The unique MST Designated Bridge Identifier. "
+
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.4"
+::= { mSTInstanceEntry 4}
+
+mSTInstanceRootPriority OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The MST root priority."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.5"
+::= { mSTInstanceEntry 5 }
+
+mSTInstanceRemainingHopCount OBJECT-TYPE
+SYNTAX Integer32 (0..40)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The remaining hop count for this MST instance."
+
+::= {mSTInstanceEntry 6 }
+
+mSTInstancePriority OBJECT-TYPE
+SYNTAX Integer32 (0..61440)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"MSTI priority, in steps of 4096."
+DEFVAL { 32768 }
+::= {mSTInstanceEntry 7 }
+
+--
+-- Multiple Spanning Tree timers
+--
+mSTMigrationTimer OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"MST (Multiple Spanning Tree) migration timer .
+Determines timeout migration in seconds"
+::= { mSTTimers 1}
+
+
+mSTTxHoldCount OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"MST (Multiple Spanning Tree) Tx Hold Counter"
+::= { mSTTimers 2}
+
+
+mSTMaxAge OBJECT-TYPE
+SYNTAX Timeout (600..4000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The maximum age of Multiple Spanning Tree Protocol
+information learned from the network on any port
+before it is discarded, in units of hundredths of
+a second. This is the actual value that this
+bridge is currently using."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.3.4"
+::= { mSTTimers 3 }
+
+mSTHelloTime OBJECT-TYPE
+SYNTAX Timeout (100..1000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The time between the transmissions of
+Configuration bridge PDUs by this node on any port
+when the port is the root of the spanning tree or trying
+to become so, in units of hundredths of a second.
+This is the actual value that this bridge is
+currently using."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.3.5"
+::= { mSTTimers 4 }
+
+mSTForwardDelay OBJECT-TYPE
+SYNTAX Timeout (400..3000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This time value, measured in units of hundredths
+of a second, controls how fast a port changes its
+spanning state when moving toward the Forwarding
+state. The value determines how long the port
+stays in each of the Listening and Learning
+states, which precede the Forwarding state. This
+value is also used, when a topology change has
+been detected and is underway, to age all dynamic
+entries in the Forwarding Database. Note that
+this value is the one that this bridge is
+currently using, in contrast to
+mSTBridgeForwardDelay which is the value that
+this bridge and all others would start using
+if/when this bridge were to become the root."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.3.6"
+::= { mSTTimers 5 }
+
+
+mSTBridgeMaxAge OBJECT-TYPE
+SYNTAX Timeout (600..4000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The value that all bridges use for MaxAge when
+this bridge is acting as the root. Note that
+802.1D-1990 specifies that the range for this
+parameter is related to the value of
+mSTBridgeHelloTime. The granularity of this
+timer is specified by 802.1D-1990 to be 1 second.
+An agent may return a badValue error if a set operation is
+attempted with a value that is not a whole number
+of seconds."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.3.8"
+::= { mSTTimers 6 }
+
+mSTBridgeHelloTime OBJECT-TYPE
+SYNTAX Timeout (100..1000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The value that all bridges use for HelloTime when
+this bridge is acting as the root. The
+granularity of this timer is specified by 802.1D-
+1990 to be 1 second. An agent may return a badValue error if a set operation is
+attempted with a value that is not a whole number
+of seconds."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.3.9"
+::= { mSTTimers 7 }
+
+mSTBridgeForwardDelay OBJECT-TYPE
+SYNTAX Timeout (400..3000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The value that all bridges use for ForwardDelay
+when this bridge is acting as the root. Note that
+802.1D-1990 specifies that the range for this
+parameter is related to the value of
+mSTBridgeMaxAge. The granularity of this
+timer is specified by 802.1D-1990 to be 1 second.
+An agent may return a badValue error if a set operation is
+attempted with a value that is not a whole number
+of seconds."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.3.10"
+::= { mSTTimers 8 }
+
+
+--
+-- Multiple Spanning Tree bridge ports
+--
+mSTPortTable OBJECT-TYPE
+SYNTAX SEQUENCE OF MSTPortEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A table containing port information for the MST
+Protocol on all the bridge ports existing on the
+system."
+::= { mSTPort 1 }
+
+mSTPortEntry OBJECT-TYPE
+SYNTAX MSTPortEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry with port information for the MST Protocol
+on a bridge port."
+INDEX { dot1dBasePort }
+::= { mSTPortTable 1 }
+
+MSTPortEntry ::= SEQUENCE {
+mSTPortAdminLinkType INTEGER,
+mSTPortOperLinkType INTEGER,
+mSTPortProtocolMigration TruthValue,
+mSTPortStatus BITS,
+mSTPortAdminEdgePort TruthValue,
+mSTPortOperEdgePort TruthValue,
+mSTPortEnable INTEGER
+
+}
+
+mSTPortAdminLinkType OBJECT-TYPE
+SYNTAX INTEGER {
+pointToPoint(1),
+shared(2),
+auto(3)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Indicates the administrative link type configuration of
+a bridge port for the MST protocol.
+
+pointToPoint -- the port is administratively configured to
+be connected to a point-to-point link.
+
+shared -- the port is administratively configured to be
+connected to a shared medium.
+
+auto -- the administrative configuration of the port's
+link type depends on the duplex mode of the port's link.
+If the port's link is full-duplex, the administrative
+link type configuration on this port will be taken
+as pointTopoint(1). If the port link is half-duplex,
+the administrative link type configuration on this
+port will be taken as shared(2).
+
+This configuration of this object only takes effect when the
+stpxSpanningTreeType is mst(4)."
+::= { mSTPortEntry 1 }
+
+mSTPortOperLinkType OBJECT-TYPE
+SYNTAX INTEGER {
+pointToPoint(1),
+shared(2),
+other(3)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Indicates the operational link type of a bridge port
+for the MST protocol.
+
+pointToPoint -- the port is operationally connected to
+a point-to-point link.
+
+shared -- the port is operationally connected to
+a shared medium.
+
+other -- none of the above.
+
+This object is only instantiated when the value of the
+stpxSpanningTreeType object is mst(4)."
+::= { mSTPortEntry 2 }
+
+mSTPortProtocolMigration OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The protocol migration control on this port. When the
+value of thw stpxSpanningTreeType object is mst(4), setting
+true(1) to this object forces the device to try using
+version 2 BPDUs on this port. When the value of
+the stpxSpanningTreeType object is not mst(4), setting true(1) to
+this object has no effect. Setting false(2) to this object
+has no effect. This object always returns false(2) when read."
+REFERENCE
+"IEEE 802.1w clause 14.8.2.4, 17.26."
+::= { mSTPortEntry 3 }
+
+mSTPortStatus OBJECT-TYPE
+SYNTAX BITS {
+edge(0),
+boundary(1),
+pvst(2),
+stp(3)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Indicates the operational status of the port for the
+MST protocol.
+
+edge -- this port is an edge port for the MST region.
+
+boundary -- this port is a boundary port for the
+MST region.
+
+pvst -- this port is connected to a PVST/PVST+ bridge.
+
+stp -- this port is connected to a Single Spanning
+Tree bridge.
+
+This object is only instantiated when the object value
+of stpxSpanningTreeType is mst(4)."
+::= { mSTPortEntry 4 }
+
+mSTPortAdminEdgePort OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The administrative value of the Edge Port parameter. A
+value of true(1) indicates that this port should be
+assumed as an edge-port and a value of FALSE(2) indicates
+that this port should be assumed as a non-edge-port."
+REFERENCE
+"IEEE 802.1t clause 14.8.2, 18.3.3"
+::= { mSTPortEntry 5 }
+
+mSTPortOperEdgePort OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The operational value of the Edge Port parameter. The
+object is initialized to the value of
+dot1dStpPortAdminEdgePort and is set false(2) on reception of
+a BPDU."
+REFERENCE
+"IEEE 802.1t clause 14.8.2, 18.3.4"
+::= { mSTPortEntry 6 }
+
+mSTPortEnable OBJECT-TYPE
+SYNTAX INTEGER {
+enabled(1),
+disabled(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The enabled/disabled status of the port."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.2"
+::= { mSTPortEntry 7 }
+
+mSTPortPerMstTable OBJECT-TYPE
+SYNTAX SEQUENCE OF MSTPortPerMstEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A table containing a list of the bridge ports for a
+particular MST instance. This table holds the
+settings."
+::= { mSTPort 2 }
+
+mSTPortPerMstEntry OBJECT-TYPE
+SYNTAX MSTPortPerMstEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry containing the port information for the MST
+protocol on a port for a particular MST instance."
+INDEX { mSTInstanceIndex,
+dot1dBasePort }
+::= { mSTPortPerMstTable 1 }
+
+MSTPortPerMstEntry ::= SEQUENCE {
+mSTPortPerMstRoleValue INTEGER,
+mSTPortPerMstPriority INTEGER,
+mSTPortPerMstState INTEGER,
+mSTPortPerMstPathCost INTEGER,
+mSTPortPerMstDesignatedCost Integer32,
+mSTPortPerMstDesignatedBridge BridgeId,
+mSTPortPerMstDesignatedPort OCTET STRING
+
+}
+
+mSTPortPerMstRoleValue OBJECT-TYPE
+SYNTAX INTEGER {
+disabled(1),
+root(2),
+designated(3),
+alternate(4),
+backUp(5),
+boundary(6)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Indicates the port role on a particular MST instance
+for the MST protocol.
+
+disabled -- this port has no role on this MST instance.
+
+root -- this port has the role of root port on this MST
+instance.
+
+designated -- this port has the role of designated
+port on this MST instance.
+
+alternate -- this port has the role of alternate port
+on this MST instance.
+
+backUp -- this port has the role of backup port on this
+MST instance.
+
+boundary -- this port has the role of boundary port on
+this MST instance."
+::= { mSTPortPerMstEntry 1 }
+
+mSTPortPerMstPriority OBJECT-TYPE
+SYNTAX INTEGER (0..255)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The value of the priority field which is
+contained in the first (in network byte order)
+octet of the (2 octet long) Port ID. The other
+octet of the Port ID is given by the value of
+mSTPort."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.1"
+::= { mSTPortPerMstEntry 2 }
+
+mSTPortPerMstState OBJECT-TYPE
+SYNTAX INTEGER {
+disabled(1),
+blocking(2),
+listening(3),
+learning(4),
+forwarding(5),
+broken(6)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The port's current state as defined by
+application of the Spanning Tree Protocol. This
+state controls what action a port takes on
+reception of a frame. If the bridge has detected
+a port that is malfunctioning it will place that
+port into the broken(6) state. For ports that
+are disabled (see mSTPortEnable), this object
+will have a value of disabled(1)."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.2"
+::= { mSTPortPerMstEntry 3 }
+
+
+mSTPortPerMstPathCost OBJECT-TYPE
+SYNTAX INTEGER (1..200000000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The contribution of this port to the path cost of
+paths toward the spanning tree root that include
+this port. 802.1D-1990 recommends that the
+default value of this parameter be in inverse
+proportion to the speed of the attached LAN."
+REFERENCE
+"IEEE 802.1D-1990: Section 4.5.5.3"
+::= { mSTPortPerMstEntry 4 }
+
+mSTPortPerMstDesignatedCost OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+""
+REFERENCE
+""
+::= { mSTPortPerMstEntry 5 }
+
+mSTPortPerMstDesignatedBridge OBJECT-TYPE
+SYNTAX BridgeId
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+""
+REFERENCE
+""
+::= { mSTPortPerMstEntry 6 }
+
+mSTPortPerMstDesignatedPort OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (2))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The Port Identifier of the port on the MST Instance Designated Bridge for this port's segment."
+::= { mSTPortPerMstEntry 7 }
+
+mstpNewRoot NOTIFICATION-TYPE
+OBJECTS { mSTInstanceIndex }
+STATUS current
+DESCRIPTION
+"This notification is the MSTP equivalent of the standard STP newRoot notification."
+::= {prvtMSTNotifications 1}
+
+mstpTopologyChange NOTIFICATION-TYPE
+OBJECTS { mSTInstanceIndex }
+STATUS current
+DESCRIPTION
+"This notification is the MSTP equivalent of the standard STP topologyChange notification."
+::= {prvtMSTNotifications 2}
+
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-NETWORK-LOOPBACK-TEST-MIB b/MIBS/telco-systems/binos/PRVT-NETWORK-LOOPBACK-TEST-MIB
new file mode 100644
index 0000000..c914b89
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-NETWORK-LOOPBACK-TEST-MIB
@@ -0,0 +1,210 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-NETWORK-LOOPBACK-TEST-MIB
+-- ** Project: Network Loopback Tester 
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-NETWORK-LOOPBACK-TEST-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE
+FROM SNMPv2-SMI         
+
+ifIndex
+FROM IF-MIB     
+
+MODULE-COMPLIANCE,
+OBJECT-GROUP,
+NOTIFICATION-GROUP
+FROM SNMPv2-CONF
+
+TimeStamp,
+RowStatus
+FROM SNMPv2-TC 
+
+NOTIFICATION-TYPE
+FROM SNMPv2-SMI                    -- [RFC2578]
+
+   
+accessListControlListGroup
+FROM  PRVT-SWITCH-ACCESS-LIST-MIB
+
+ipSwitch FROM PRVT-SWITCH-MIB; 
+
+-- The NETWORK LOOPBACK TEST MIB
+prvtNetworkLoopbackTestMib MODULE-IDENTITY
+
+LAST-UPDATED "201008310000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB contains managed objects definitions for
+encapsulating Loopback Tester feature that enables or disables
+embedded mechanisms for network troubleshooting, diagnostics and measurement."
+             
+REVISION "201008310000Z"
+DESCRIPTION
+"Initial version."  
+
+::= { ipSwitch 7 }     
+
+prvtNetworkLoopbackTestNotifications OBJECT IDENTIFIER  ::= { prvtNetworkLoopbackTestMib 0 } 
+prvtNetworkLoopbackTestObjects OBJECT IDENTIFIER 		::= { prvtNetworkLoopbackTestMib 1 } 
+prvtNetworkLoopbackTestConformance OBJECT IDENTIFIER 	::= { prvtNetworkLoopbackTestMib 2 }
+
+prvtNetworkLoopbackTestTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtNetworkLoopbackTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object for configuring and display information about Network Loopback Tester."
+::= { prvtNetworkLoopbackTestObjects 1 }
+
+prvtNetworkLoopbackTestEntry OBJECT-TYPE
+SYNTAX PrvtNetworkLoopbackTestEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtNetworkLoopbackTestTable table"
+INDEX { ifIndex, accessListControlListGroup }
+::= { prvtNetworkLoopbackTestTable 1 }
+
+PrvtNetworkLoopbackTestEntry ::=  SEQUENCE {  
+prvtNetworkLoopTestDuration  INTEGER,
+prvtNetworkLoopStartDuration TimeStamp,
+prvtNetworkLoopEndDuration   TimeStamp,
+prvtNetworkLoopRowStatus     RowStatus
+} 
+
+prvtNetworkLoopTestDuration  OBJECT-TYPE
+SYNTAX INTEGER (0..100000) 
+MAX-ACCESS read-write   
+STATUS current
+DESCRIPTION
+"An integer that  identifies the duration in seconds of Loopback test.
+For infinite Loopback tests object will have the value 0."        
+::= {prvtNetworkLoopbackTestEntry 1}
+
+prvtNetworkLoopStartDuration OBJECT-TYPE
+SYNTAX TimeStamp 
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Star time of Loopback test.
+For infinite Loopback tests object will have the value 0."         
+::= {prvtNetworkLoopbackTestEntry 2}         
+
+prvtNetworkLoopEndDuration OBJECT-TYPE
+SYNTAX TimeStamp 
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"End time of Loopback test.
+For infinite Loopback tests object will have the value 0."      
+::= {prvtNetworkLoopbackTestEntry 3} 
+
+prvtNetworkLoopRowStatus OBJECT-TYPE
+SYNTAX RowStatus  
+MAX-ACCESS read-create   
+STATUS current
+DESCRIPTION
+"Network Loopback Test RowStatus.
+ Both createAndGo(4) and createAndWait(5) are available. 
+ CreateAndGo(4) is used for enable a Loopback test unlimited in time and CreateAndWait(4) 
+ for enable a Loopback Test on a period specified by prvtNetworkLoopTestDuration."      
+::= {prvtNetworkLoopbackTestEntry 4}   
+          
+-- ----------------------------------------------------------------------------
+-- Notifications
+-- ----------------------------------------------------------------------------
+                               
+prvtNetworkLoopbackTestFinish NOTIFICATION-TYPE
+OBJECTS { ifIndex, accessListControlListGroup }
+STATUS current
+DESCRIPTION
+"This notification is sent  when a Network Loopback Test is complete."
+::= {prvtNetworkLoopbackTestNotifications 1}       
+
+-- ----------------------------------------------------------------------------
+-- Conformance Information
+-- ----------------------------------------------------------------------------
+prvtNetworkLoopTestCompliances  OBJECT IDENTIFIER ::= {prvtNetworkLoopbackTestConformance 1}
+prvtNetworkLoopTestGroups OBJECT IDENTIFIER ::= {prvtNetworkLoopbackTestConformance 2}
+
+-- compliance statements
+prvtNetworkLoopTestCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for Network Loopback Tester."
+MODULE -- this module
+MANDATORY-GROUPS {
+prvtNetworkLoopTestGroup,
+prvtNetworkLoopTestNotificationsGroup
+}      
+::= {prvtNetworkLoopTestCompliances 1}  
+
+prvtNetworkLoopTestGroup  OBJECT-GROUP
+OBJECTS {prvtNetworkLoopTestDuration,
+prvtNetworkLoopStartDuration,
+prvtNetworkLoopEndDuration,
+prvtNetworkLoopRowStatus
+}
+STATUS current
+DESCRIPTION   
+"The group of objects regarding Network Looback Tester feature."
+::= {prvtNetworkLoopTestGroups 1}     
+
+prvtNetworkLoopTestNotificationsGroup NOTIFICATION-GROUP
+NOTIFICATIONS{
+prvtNetworkLoopbackTestFinish
+}  
+STATUS current
+DESCRIPTION   
+"The collection of Notifications used to indicate general status information
+ of Network Looback Tester feature."
+::= {prvtNetworkLoopTestGroups 2} 
+
+END
+
+
+
diff --git a/MIBS/telco-systems/binos/PRVT-OEM1-PARAMS-MIB b/MIBS/telco-systems/binos/PRVT-OEM1-PARAMS-MIB
new file mode 100644
index 0000000..111095a
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-OEM1-PARAMS-MIB
@@ -0,0 +1,206 @@
+
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-OEM1-PARAMS-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-OEM1-PARAMS-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+     MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI
+
+     DisplayString FROM SNMPv2-TC
+
+	 switch FROM PRVT-SWITCH-MIB; 
+          
+	prvtOem1ParamsMIB MODULE-IDENTITY
+        LAST-UPDATED "200612270000Z"
+        ORGANIZATION "BATM Advanced Communication"
+        CONTACT-INFO   
+
+        "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+        DESCRIPTION
+        "Initial version. This MIB will provied a way to read 
+        specific device parameters"
+         
+                -- Revision history.  
+   REVISION "200612270000Z"
+   DESCRIPTION
+        "Initial revision history"
+           
+         
+       ::= { switch 2110 }
+
+-- MIB objects
+
+    prvtOem1ParamsObjects OBJECT IDENTIFIER ::= { prvtOem1ParamsMIB 1 }
+    prvtOem1ParamsNotifications  OBJECT IDENTIFIER ::= { prvtOem1ParamsMIB 2 }
+    prvtOem1ParamsConformance    OBJECT IDENTIFIER ::= { prvtOem1ParamsMIB 3 }
+
+    prvtSerialNumber OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Device serial number"
+		::= { prvtOem1ParamsObjects 1 }
+
+    prvtAssemblyNumber OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Device assembly number"
+		::= { prvtOem1ParamsObjects 2 }
+
+    prvtHardwareRevision OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Device hardware revision"
+		::= { prvtOem1ParamsObjects 3 }
+
+    prvtSwitchRevision OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Switch revision"
+		::= { prvtOem1ParamsObjects 4 }
+
+    prvtSwitchVersion OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Switch version"
+		::= { prvtOem1ParamsObjects 5 }
+
+    prvtSwitchEdition OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Switch edition"
+		::= { prvtOem1ParamsObjects 6 }
+
+    prvtSwitchRepair OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Switch repair"
+		::= { prvtOem1ParamsObjects 7 }
+
+    prvtHardwareAddress OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Switch hardware address"
+		::= { prvtOem1ParamsObjects 8 }
+
+    prvtCabinetRow OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Cabinet row location"
+		::= { prvtOem1ParamsObjects 9 }
+
+    prvtCabinetColumn OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Cabinet column location"
+		::= { prvtOem1ParamsObjects 10 }
+
+    prvtChassisVerticalDeviation OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Chassis vertical deviation location"
+		::= { prvtOem1ParamsObjects 11 }
+
+    prvtChassisHorizontalDeviatioin OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Chassis horizontal deviation location"
+		::= { prvtOem1ParamsObjects 12 }
+
+    prvtCabinetHMSNumber OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Cabinet HMS number"
+		::= { prvtOem1ParamsObjects 13 }
+
+    prvtSubrackHMSNumber OBJECT-TYPE
+		SYNTAX  DisplayString
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Subrack HMS number"
+		::= { prvtOem1ParamsObjects 14 }
+
+    prvtModelNumber OBJECT-TYPE
+		SYNTAX  INTEGER
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Model number"
+		::= { prvtOem1ParamsObjects 15 }
+
+    prvtPluginUID OBJECT-TYPE
+		SYNTAX  INTEGER
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+			"Plugin UID"
+		::= { prvtOem1ParamsObjects 16 }
+END
diff --git a/MIBS/telco-systems/binos/PRVT-OPR-LED-MANAGEMENT-MIB b/MIBS/telco-systems/binos/PRVT-OPR-LED-MANAGEMENT-MIB
new file mode 100644
index 0000000..257b158
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-OPR-LED-MANAGEMENT-MIB
@@ -0,0 +1,109 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-OPR-LED-MANAGEMENT-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-OPR-LED-MANAGEMENT-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE
+FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION
+FROM SNMPv2-TC
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+prvtOprLedMgmtMIB MODULE-IDENTITY
+LAST-UPDATED "200607290000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"Initial version. This MIB will provied a way to control
+the status of the state OPR LED for certain switches"
+
+-- Revision history.
+REVISION "200607290000Z"
+DESCRIPTION
+"Initial revision history"
+
+::= { switch 110 }
+
+-- Textual Conventions
+
+LedValues ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"All possible led states"
+SYNTAX INTEGER
+{
+green-stable (1),
+green-blinking (2),
+amber-stable (3),
+amber-blinking (4),
+red-stable (5),
+red-blinking (6)
+}
+
+-- MIB objects
+
+prvtOprLedMgmtObjects OBJECT IDENTIFIER ::= { prvtOprLedMgmtMIB 1 }
+prvtOprLedMgmtNotifications OBJECT IDENTIFIER ::= { prvtOprLedMgmtMIB 2 }
+prvtOprLedMgmtConformance OBJECT IDENTIFIER ::= { prvtOprLedMgmtMIB 3 }
+
+prvtOprLedSatus OBJECT-TYPE
+SYNTAX LedValues
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"All possible led states. States red-stable and red-blinking
+can not be set. States amber-stable and amber-blinking green-blinking can
+be set only when the current state is green-stable. The object
+has read-write access and its default value is green-stable"
+DEFVAL { green-stable }
+::= { prvtOprLedMgmtObjects 1 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB b/MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB
new file mode 100644
index 0000000..8f06b95
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-OSPF-EXTENSION-MIB
@@ -0,0 +1,232 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-OSPF-EXTENSION-MIB
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-CONFIGCHANGE-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-OSPF-EXTENSION-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE
+        FROM SNMPv2-SMI
+             TruthValue, RowStatus
+        FROM SNMPv2-TC
+ipSwitch   
+	                                     FROM PRVT-SWITCH-MIB;  
+
+
+    prvtOSPFExtensionMib MODULE-IDENTITY
+    LAST-UPDATED "200801010000Z"
+    ORGANIZATION "BATM Advanced Communication"
+    CONTACT-INFO
+        "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+    DESCRIPTION
+        "The OSPF extension MIB module contains additional information, needed to
+         control the OSPF protocol, that is not found in the standard RFC"
+
+    -- revision history    
+         REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions." 
+     REVISION     "200502160000Z"
+     	 DESCRIPTION
+		"Fixed spelling errors and changed the contact info." 
+
+    REVISION     "200211110000Z"
+    DESCRIPTION
+        "Initial version."
+
+
+    ::= { routingProtocols 2 }
+
+    -------------------------------------------------------------------------------
+    --     PRIVATE BRANCH  PRODUCTS
+    -------------------------------------------------------------------------------
+    routingProtocols   OBJECT IDENTIFIER ::= { ipSwitch 4 }
+
+
+    ospfExtension OBJECT IDENTIFIER ::= { prvtOSPFExtensionMib 1 }
+
+    ospfEnable OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object enables/disables the OSPF process in the switch"
+    ::= { ospfExtension 1 }
+
+    ospfRedistributeTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF OspfRedistributeEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+              "The table represents the routing protocols, redistributed into the OSPF 
+              routing domain.
+               
+              Creation of conceptual row in the table starts the redistribution of the 
+              specified protocol, which would lead to the injection of routing information 
+              from that protocol into the OSPF.
+              
+              Deletion of conceptual row would stop the redistribution of that protocol 
+              into the OSPF.
+              
+              OSPF router, which redistributes routing information from other 
+              protocols, is an ASBR router"
+    ::= { ospfExtension 2 }
+
+    ospfRedistributeEntry OBJECT-TYPE
+    SYNTAX OspfRedistributeEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+               "The conceptual row represents a routing protocol, redistributed into OSPF"
+    INDEX {ospfRedistributeProtocol}
+    ::= {ospfRedistributeTable 1}
+
+    OspfRedistributeEntry ::= SEQUENCE {
+        ospfRedistributeProtocol       INTEGER,
+        ospfRedistributeMetric         INTEGER,
+        ospfRedistributeMetricType     INTEGER,
+        ospfRedistributeRouteMap       OCTET STRING,
+        ospfRedistributeRowStatus      RowStatus
+    }
+
+
+    ospfRedistributeProtocol OBJECT-TYPE
+    SYNTAX INTEGER {
+           kernel (1),
+           connected(2),
+           static (3),
+           rip (4),
+           bgp (5)
+           }
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+               "The specific routes redistributed into OSPF. For T4R model the valid values 
+               are connected, rip and static.
+               For all the other models all of the above routes can be redistributed "
+        ::= { ospfRedistributeEntry 1}
+
+    ospfRedistributeMetric OBJECT-TYPE
+    SYNTAX INTEGER (0..16777214)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+               "The metric, with which the external routes will be redistributed in the OSPF"
+        ::= {ospfRedistributeEntry 2}
+
+    ospfRedistributeMetricType OBJECT-TYPE
+    SYNTAX INTEGER {
+           e1(1),
+           e2(2)
+           }
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "The type of metric, with which the external routes are advertised into the OSPF 
+        routing domain. OSPF supports two types of external metrics.  Type 1 external 
+        metrics are expressed in the same units as the OSPF interface cost (i.e., in terms 
+        of the link state metric).  Type 2 external metrics are an order of magnitude larger; 
+        any Type 2 metric is considered greater than the cost of any path internal to the AS.  
+        Use of Type 2 external metrics assumes that routing between AS'es is the major 
+        cost of routing a packet, and eliminates the need for conversion of external costs 
+        to internal link state metrics."
+    ::= {ospfRedistributeEntry 3}
+
+    ospfRedistributeRouteMap OBJECT-TYPE
+    SYNTAX OCTET STRING
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+               "The route map that would filter the redistributed routing information"
+    ::= {ospfRedistributeEntry 4}
+
+    ospfRedistributeRowStatus OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "Indicates the status of the row. Setting of this field to active enables the 
+        redistribution of the protocol.
+        
+        Setting this field to destroy disables the redistribution of the protocol."
+    ::= {ospfRedistributeEntry 5}
+
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-PORT-SECURITY-MIB b/MIBS/telco-systems/binos/PRVT-PORT-SECURITY-MIB
new file mode 100644
index 0000000..841dd8b
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-PORT-SECURITY-MIB
@@ -0,0 +1,123 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-PORT-SECURITY-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2004, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+PRVT-PORT-SECURITY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+NOTIFICATION-TYPE
+FROM SNMPv2-SMI
+
+dot1qTpFdbStatus,
+dot1qVlanStatus
+FROM Q-BRIDGE-MIB
+
+NOTIFICATION-GROUP
+FROM SNMPv2-CONF
+
+switch,
+configL2IfaceEnable
+FROM PRVT-SWITCH-MIB;
+
+prvtPortSecurityMib MODULE-IDENTITY
+LAST-UPDATED "200806180000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"The Port Security MIB module for managing the port security attributes."
+
+-- revision history
+REVISION "200806180000Z"
+DESCRIPTION
+"Added prvtDuplicatedMACAddressAlarm."
+
+REVISION "200502160000Z"
+DESCRIPTION
+"Fixed spelling errors and changed the contact info."
+
+REVISION "200405100000Z"
+DESCRIPTION
+"Initial version."
+
+::= { switch 109 }
+
+-- ----------------------------------------------------------------------------
+-- Groups
+-- ----------------------------------------------------------------------------
+
+prvtPortSECNotifications OBJECT IDENTIFIER ::= { prvtPortSecurityMib 0 }
+prvtPortSECObjects OBJECT IDENTIFIER ::= { prvtPortSecurityMib 1 }
+prvtPortSECConformance OBJECT IDENTIFIER ::= { prvtPortSecurityMib 2 }
+
+prvtPortSECViolation NOTIFICATION-TYPE
+OBJECTS {dot1qVlanStatus,dot1qTpFdbStatus,configL2IfaceEnable}
+STATUS current
+DESCRIPTION
+"This notification is sent by the agent when a security violation occurres on a port."
+::= {prvtPortSECNotifications 1}
+
+prvtDuplicatedMACAddressAlarm NOTIFICATION-TYPE
+OBJECTS { dot1qVlanStatus, dot1qTpFdbStatus, configL2IfaceEnable }
+STATUS current
+DESCRIPTION
+"This notification is sent by the agent when a duplicated MAC is recived."
+::= {prvtPortSECNotifications 2}
+
+-- *******************************************************************
+-- Conformance Information
+-- *******************************************************************
+
+prvtPortSECMIBGroups OBJECT IDENTIFIER ::= { prvtPortSECConformance 2 }
+
+prvtPortSECNotificationGroup NOTIFICATION-GROUP
+NOTIFICATIONS {
+prvtPortSECViolation
+}
+STATUS current
+DESCRIPTION
+"Notification Group for the private Port Security Violation Trap"
+::= { prvtPortSECMIBGroups 1 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-PORTS-AGGREGATION-MIB b/MIBS/telco-systems/binos/PRVT-PORTS-AGGREGATION-MIB
new file mode 100644
index 0000000..b6598b7
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-PORTS-AGGREGATION-MIB
@@ -0,0 +1,626 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-PORTS-AGGREGATION-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2002, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+PRVT-PORTS-AGGREGATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+NOTIFICATION-TYPE,
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Counter32,
+Integer32
+FROM SNMPv2-SMI -- [RFC2578]
+
+DisplayString,
+TruthValue
+FROM SNMPv2-TC
+
+ifIndex,
+ifAdminStatus,
+ifOperStatus
+FROM RFC1213-MIB
+
+PortList
+FROM Q-BRIDGE-MIB
+
+switch,
+configL2IfaceUnit,
+configL2IfaceSlot,
+configL2IfacePort
+FROM PRVT-SWITCH-MIB;
+
+-------------------------------------------------------------------------------
+-- PRIVATE BRANCH PRODUCTS
+-------------------------------------------------------------------------------
+
+prvtPortsAggregationMib MODULE-IDENTITY
+LAST-UPDATED "200809200000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"The Ports Aggregation MIB module for managing switch or ipSwitch
+static and dynamic port aggregation."
+
+-- revision history 
+REVISION "200809200000Z"
+DESCRIPTION
+"Added notifications for aggregation members." 
+
+REVISION "200502160000Z"
+DESCRIPTION
+"Fixed spelling errors and changed the contact info." 
+
+REVISION "200410290000Z"
+DESCRIPTION
+"Added aggregationLacpPortKey"
+
+REVISION "200305060000Z"
+DESCRIPTION
+"Moved to SMI-V2."
+
+REVISION "200212240000Z"
+DESCRIPTION
+"Added enabling and disabling for LACP."
+
+REVISION "200211110000Z"
+DESCRIPTION
+"Initial version."
+::= { switch 106 }
+
+portsAggregation OBJECT IDENTIFIER ::= { prvtPortsAggregationMib 1 }
+portsAggregationConfig OBJECT IDENTIFIER ::= { prvtPortsAggregationMib 2 }
+portsAggregationTraps OBJECT IDENTIFIER ::= { prvtPortsAggregationMib 3 }
+
+-- -----------------------------------------------------------------------------
+-- port trunk status
+-- -----------------------------------------------------------------------------
+
+maxAggregatorId OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The maximum allowed aggregator ID for this unit."
+::= { portsAggregation 1 }
+
+aggregationLacpSystemPriority OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The LACP system priority."
+::= { portsAggregation 2 }
+
+portsAggregationTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PortsAggregationEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains the status of all the trunks in the system
+It can contain two major types: static and dynamic trunks."
+::= { portsAggregation 3 }
+
+portsAggregationEntry OBJECT-TYPE
+SYNTAX PortsAggregationEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Ports aggregation entry."
+INDEX { aggregatorId }
+::= { portsAggregationTable 1 }
+
+PortsAggregationEntry ::= SEQUENCE {
+aggregatorId Integer32,
+aggregatorIfIndex Integer32,
+aggregatorType INTEGER,
+aggregatorName DisplayString,
+aggregatorPortsMembers PortList,
+aggregatorPortsActive PortList,
+aggregatorL2DropEvents Counter32,
+aggregatorL2Octets Counter32,
+aggregatorL2Pkts Counter32,
+aggregatorL2BroadcastPkts Counter32,
+aggregatorL2MulticastPkts Counter32,
+aggregatorL2CRCAlignErrors Counter32,
+aggregatorL2UndersizePkts Counter32,
+aggregatorL2OversizePkts Counter32,
+aggregatorL2Fragments Counter32,
+aggregatorL2Jabbers Counter32,
+aggregatorL2Collisions Counter32,
+aggregatorL2Pkts64Octets Counter32,
+aggregatorL2Pkts65to127Octets Counter32,
+aggregatorL2Pkts128to255Octets Counter32,
+aggregatorL2Pkts256to511Octets Counter32,
+aggregatorL2Pkts512to1023Octets Counter32,
+aggregatorL2Pkts1024to1518Octets Counter32
+}
+
+aggregatorId OBJECT-TYPE
+SYNTAX Integer32(1..255)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The internal trunk ID."
+::= { portsAggregationEntry 1 }
+
+aggregatorIfIndex OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The interface index from MIB-II ifTable."
+::= { portsAggregationEntry 2 }
+
+aggregatorType OBJECT-TYPE
+SYNTAX INTEGER {
+staticTrunk(1),
+protocol-802-1ad(2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable describes the trunk type."
+::= { portsAggregationEntry 3 }
+
+aggregatorName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The aggregator's name."
+::= { portsAggregationEntry 4 }
+
+aggregatorPortsMembers OBJECT-TYPE
+SYNTAX PortList
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The ports that are members of this trunk."
+::= { portsAggregationEntry 5 }
+
+aggregatorPortsActive OBJECT-TYPE
+SYNTAX PortList
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The active ports that are members of this trunk."
+::= { portsAggregationEntry 6 }
+
+aggregatorL2DropEvents OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of events in which packets
+were dropped by the probe due to lack of resources.
+Note that this number is not necessarily the number of
+packets dropped; it is just the number of times this
+condition has been detected."
+::= { portsAggregationEntry 7 }
+
+aggregatorL2Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of octets of data (including
+those in bad packets) received on the
+network (excluding framing bits but including
+FCS octets).
+
+This object can be used as a reasonable estimate of
+Ethernet utilization. If greater precision is
+desired, the etherStatsPkts and etherStatsOctets
+objects should be sampled before and after a common
+interval. The differences in the sampled values are
+Pkts and Octets, respectively, and the number of
+seconds in the interval is Interval. These values
+are used to calculate the Utilization as follows:
+
+Pkts * (9.6 + 6.4) + (Octets * .8)
+Utilization = 
+Interval * 10,000
+
+The result of this equation is the Ethernet segment utilization 
+which is the percent utilization of the ethernet
+segment on a 0 to 100 percent scale."
+
+::= { portsAggregationEntry 8 }
+
+aggregatorL2Pkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION 
+"The total number of packets (including bad packets,
+broadcast packets, and multicast packets) received."
+::= { portsAggregationEntry 9 }
+
+aggregatorL2BroadcastPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of good packets received that were
+directed to the broadcast address. Note that this
+does not include multicast packets."
+::= { portsAggregationEntry 10 }
+
+aggregatorL2MulticastPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of good packets received that were
+directed to a multicast address. Note that this
+number does not include packets directed to the
+broadcast address."
+::= { portsAggregationEntry 11 }
+
+aggregatorL2CRCAlignErrors OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that
+had a length (excluding framing bits, but
+including FCS octets) of between 64 and 1518
+octets, inclusive, but had either a bad
+Frame Check Sequence (FCS) with an integral
+number of octets (FCS Error) or a bad FCS with
+a non-integral number of octets (Alignment Error)."
+::= { portsAggregationEntry 12 }
+
+aggregatorL2UndersizePkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that were
+less than 64 octets long (excluding framing bits,
+but including FCS octets) and were otherwise well
+formed."
+::= { portsAggregationEntry 13 }
+
+aggregatorL2OversizePkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that were
+longer than 1518 octets (excluding framing bits,
+but including FCS octets) and were otherwise
+well formed."
+::= { portsAggregationEntry 14 }
+
+aggregatorL2Fragments OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that were less
+than 64 octets in length (excluding framing bits but
+including FCS octets) and had either a bad Frame
+Check Sequence (FCS) with an integral number of
+octets (FCS Error) or a bad FCS with a non-integral
+number of octets (Alignment Error).
+
+Note that it is entirely normal for
+etherStatsFragments to increment. This is because
+it counts both runts (which are normal occurrences
+due to collisions) and noise hits."
+::= { portsAggregationEntry 15 }
+
+aggregatorL2Jabbers OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that were
+longer than 1518 octets (excluding framing bits,
+but including FCS octets), and had either a bad
+Frame Check Sequence (FCS) with an integral number
+of octets (FCS Error) or a bad FCS with a
+non-integral number of octets (Alignment Error).
+
+Note that this definition of jabber is different
+from the definition in IEEE-802.3 section 8.2.1.5
+(10BASE5) and section 10.3.1.4 (10BASE2). These
+documents define jabber as the condition in which any
+packet exceeds 20 ms. The allowed range to detect
+jabber is between 20 ms and 150 ms."
+::= { portsAggregationEntry 16 }
+
+aggregatorL2Collisions OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The best estimate of the total number of collisions
+on this Ethernet segment.
+
+The value returned will depend on the RMON probe's location. 
+Sections 8.2.1.3 (10BASE-5) and 10.3.1.3 (10BASE-2) of 
+IEEE standard 802.3 states that a station must detect a collision in
+the receive mode if three or more stations are
+transmitting simultaneously. A repeater port must
+detect a collision when two or more stations are
+transmitting simultaneously. Thus a probe placed on
+a repeater port could record more collisions than a
+probe connected to a station on the same segment
+would.
+
+Probe location plays a much smaller role when
+considering 10BASE-T. Section 14.2.1.4 (10BASE-T) of IEEE
+standard 802.3 defines a collision as the
+simultaneous presence of signals on the DO and RD
+circuits (transmitting and receiving at the same
+time). A 10BASE-T station can only detect
+collisions when it is transmitting. Thus probes
+placed on a station and a repeater, should report
+the same number of collisions.
+
+Note also that an RMON probe inside a repeater
+should ideally report collisions between the
+repeater and one or more other hosts (transmit
+collisions as defined by IEEE 802.3k) plus receiver
+collisions observed on any coaxial segments to which
+the repeater is connected."
+::= { portsAggregationEntry 17 }
+
+aggregatorL2Pkts64Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were 64 octets in length
+(excluding framing bits but including FCS octets)."
+::= { portsAggregationEntry 18 }
+
+aggregatorL2Pkts65to127Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+65 and 127 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { portsAggregationEntry 19 }
+
+aggregatorL2Pkts128to255Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+128 and 255 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { portsAggregationEntry 20 }
+
+aggregatorL2Pkts256to511Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+256 and 511 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { portsAggregationEntry 21 }
+
+aggregatorL2Pkts512to1023Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+512 and 1023 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { portsAggregationEntry 22 }
+
+aggregatorL2Pkts1024to1518Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+1024 and 1518 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { portsAggregationEntry 23 }
+
+aggregationLacpSystemEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This value enable/disable the LACP system globaly"
+::= { portsAggregation 4 }
+
+-- -----------------------------------------------------------------------------
+-- physical interface aggregation configuration parameters
+-- -----------------------------------------------------------------------------
+
+portsAggregationConfigTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PortsAggregationConfigEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains only the static (created by management) port trunk configuration."
+::= { portsAggregationConfig 1 }
+
+portsAggregationConfigEntry OBJECT-TYPE
+SYNTAX PortsAggregationConfigEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Port aggregation config entry."
+INDEX { configL2IfaceUnit, configL2IfaceSlot,configL2IfacePort }
+::= { portsAggregationConfigTable 1 }
+
+PortsAggregationConfigEntry ::= SEQUENCE
+{
+staticAggregationID Integer32,
+dynamicAggregationID Integer32,
+aggregationType INTEGER,
+aggregationLacpPortPriority Integer32,
+aggregationLacpPortKey Integer32
+}
+
+staticAggregationID OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" A number representing the aggregation group that this port belongs to.
+0 means that this port does not belong to any static group."
+::= { portsAggregationConfigEntry 1 }
+
+dynamicAggregationID OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+" A number representing the aggregation group that this port belongs to.
+0 means that this port does not belong to any dynamic group"
+::= { portsAggregationConfigEntry 2 }
+
+aggregationType OBJECT-TYPE
+SYNTAX INTEGER {
+disable(1),
+static(2),
+protocol-802-1adAcive(3),
+protocol-802-1adPassive(4)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Specifies the aggregation type of the interface - disable(1) if the port does not belong to a group,
+static(2) if the port belongs to a static group, and protocol-802-1adAcive(3) or protocol-802-1adPassive(4)
+if the interface is part of a dynamic group."
+::= { portsAggregationConfigEntry 3 }
+
+aggregationLacpPortPriority OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"LACP priority for a port"
+::= { portsAggregationConfigEntry 4 }
+
+aggregationLacpPortKey OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"LACP identification key for a port"
+::= { portsAggregationConfigEntry 5 }
+
+lagMemberLinkUp NOTIFICATION-TYPE
+OBJECTS {
+ifIndex, -- the id of the aggregation group
+ifIndex, -- Port member of the aggregation group
+ifAdminStatus,
+ifOperStatus
+}
+STATUS current
+DESCRIPTION
+"This notification is generated when lag link becomes
+up. 
+The first ifIndex indicates the id of the trunk 
+interface. 
+The second one shows the port member with link status change"
+::= { portsAggregationTraps 1 }
+
+lagMemberLinkDown NOTIFICATION-TYPE
+OBJECTS {
+ifIndex, -- the id of the aggregation group
+ifIndex, -- Port member of the aggregation group
+ifAdminStatus,
+ifOperStatus
+}
+STATUS current
+DESCRIPTION
+"This notification is generated when lag link becomes
+down.
+The first ifIndex indicates the id of the trunk 
+interface. 
+The second one shows the port member with link status change"
+::= { portsAggregationTraps 2 }
+
+
+lagMemberAdd NOTIFICATION-TYPE
+OBJECTS {
+ifIndex, -- the id of the aggregation group
+ifIndex -- Port member of the aggregation group
+}
+STATUS current
+DESCRIPTION
+"This notification is generated when a new port is added to 
+a lag link. 
+The first ifIndex indicates the id of the trunk 
+interface. 
+The second one shows the added port member"
+
+::= { portsAggregationTraps 3 }
+
+lagMemberRemove NOTIFICATION-TYPE
+OBJECTS {
+ifIndex, -- the id of the aggregation group
+ifIndex -- Port member of the aggregation group
+}
+STATUS current
+DESCRIPTION
+"This notification is generated when a port is removed from 
+a lag.
+The first ifIndex indicates the id of the trunk 
+interface. 
+The second one shows the removed port member"
+::= { portsAggregationTraps 4 }
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-PROXY-MANAGER-MIB b/MIBS/telco-systems/binos/PRVT-PROXY-MANAGER-MIB
new file mode 100644
index 0000000..ed1bb0d
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-PROXY-MANAGER-MIB
@@ -0,0 +1,554 @@
+PRVT-PROXY-MANAGER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Unsigned32,
+IpAddress,
+NOTIFICATION-TYPE,
+Integer32
+FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION,
+RowStatus,
+MacAddress
+FROM SNMPv2-TC
+
+ipSwitch
+FROM PRVT-SWITCH-MIB;
+
+
+prvtProxyManager MODULE-IDENTITY
+LAST-UPDATED "200901160000Z"
+
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+DESCRIPTION
+"The MIB module for management of the PRVT-PROXY-MANAGER product."
+
+-- Revision history.
+REVISION "200901160000Z"
+DESCRIPTION "Added prvtProxySecurityEnabled, prvtProxyAcceptInforms,
+prvtProxyManMappingAuthenticated, prvtProxyManagerUnauthenticatedDevice"
+
+REVISION "200711130000Z"
+DESCRIPTION "Initial version"
+
+::= { ipSwitch 6 }
+
+prvtProxyManNotifications OBJECT IDENTIFIER ::= { prvtProxyManager 0 } -- traps
+prvtProxyManObjects OBJECT IDENTIFIER ::= { prvtProxyManager 1 } -- tables
+
+PrvtProxyManStates ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "The the switch on/off states of the Proxy Manager
+modes."
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}
+
+PrvtProxyManProtocols ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "The the switch on/off states of the Proxy Manager
+modes."
+SYNTAX INTEGER {
+unknown(0),
+snmp-udp(1),
+snmptrap-udp(2),
+telnet-tcp(3),
+ssh-tcp(4),
+tftp-udp(5),
+syslog-udp(6)
+}
+
+PrvtProxyManPortTypes ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "The the switch on/off states of the Proxy Manager
+modes."
+SYNTAX INTEGER {
+unknown(0),
+tcp(1),
+udp(2)
+}
+
+PrvtProxyManDirection ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "Specifices the traffic flow direction "
+SYNTAX INTEGER {
+noDirection(0),
+inbound(1),
+outbound(2)
+}
+
+PrvtProxyManAuthentication ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "Authenticated state of Managed device"
+SYNTAX INTEGER {
+authenticated(0),
+unauthenticated(1)
+}
+
+PrvtProxySecurity ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "State of Proxy Security"
+SYNTAX INTEGER {
+securityEnabled(0),
+securityDisabled(1)
+}
+
+PrvtProxyAcceptInformsType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "State of Proxy Inform Accept"
+SYNTAX INTEGER {
+informsEnabled(0),
+informsDisabled(1)
+}
+
+-- Proxy scalar object
+
+prvtProxyManDeviceAddress OBJECT-TYPE
+SYNTAX MacAddress
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"The object represents the discovered device address.
+It is used only for topology change notifications."
+::= { prvtProxyManObjects 1 }
+
+-- Proxy Manager instance table
+-- This table is used to configure the global parameters of the Proxy Manager.
+prvtProxyManConfigTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtProxyManConfigEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The table of containing the global configuration of the Proxy Manager instance."
+::= { prvtProxyManObjects 2 }
+
+prvtProxyManConfigEntry OBJECT-TYPE
+SYNTAX PrvtProxyManConfigEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Each entry represents configuration for a ProxyManager instance."
+INDEX { prvtProxyManIndex }
+::= { prvtProxyManConfigTable 1 }
+
+PrvtProxyManConfigEntry ::= SEQUENCE {
+prvtProxyManIndex Unsigned32,
+prvtProxyManStatus PrvtProxyManStates,
+prvtProxyManAutoMapMode PrvtProxyManStates,
+prvtProxyManVlan Unsigned32,
+prvtProxyManIpAddr IpAddress,
+prvtProxyManIpMask Unsigned32,
+prvtProxyManIpRangeStart IpAddress,
+prvtProxyManIpRangeEnd IpAddress,
+prvtProxyManLeasePeriod Unsigned32,
+prvtProxyManRowStatus RowStatus,
+prvtProxySecurityEnabled PrvtProxySecurity,
+prvtProxyAcceptInforms PrvtProxyAcceptInformsType
+
+}
+
+prvtProxyManIndex OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The index of this prvtProxyManConfigEntry. This is the
+instance index of the ProxyManager.
+
+Currently only one instance is supported."
+::= { prvtProxyManConfigEntry 1 }
+
+prvtProxyManStatus OBJECT-TYPE
+SYNTAX PrvtProxyManStates
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The object indicates whether the Proxy manger is enabled(1)
+or disabled(2). In order to enable the Proxy Manager,
+prvtProxyManIpRangeEnd, prvtProxyManIpRangeStart,
+prvtProxyManIpMask, prvtProxyManIpAddr, prvtProxyManVlan, must
+be correctly set and consistent.
+
+In order to enable the manager prvtProxyManRowStatus should be active.
+"
+::= { prvtProxyManConfigEntry 2 }
+
+prvtProxyManAutoMapMode OBJECT-TYPE
+SYNTAX PrvtProxyManStates
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The object indicates whether the devices will be configured
+automatically - enabled(1) or manually - disabled(2).
+
+If the object is set to disable, the configuration can be
+managed via prvtProxyManMappingTable"
+DEFVAL { 1 }
+::= { prvtProxyManConfigEntry 3 }
+
+prvtProxyManVlan OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The vlan of the network specified for proxy managment.
+
+This field is mandatory for the Proxy Manager in order
+to work correctly"
+::= { prvtProxyManConfigEntry 4 }
+
+prvtProxyManIpAddr OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The ip address of the device manged by the Proxy
+Manager.
+
+This field is mandatory for the Proxy Manager in order
+to work correctly"
+::= { prvtProxyManConfigEntry 5 }
+
+prvtProxyManIpMask OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The bit mask of the network where the proxy manager resides.
+
+This field is mandatory for the Proxy Manager in order
+to work correctly"
+::= { prvtProxyManConfigEntry 6 }
+
+prvtProxyManIpRangeStart OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The start of the ip address range, used by DHCP to provide
+ip addresses for the discuvered devices
+
+This field is mandatory for the Proxy Manager in order
+to work correctly"
+::= { prvtProxyManConfigEntry 7 }
+
+prvtProxyManIpRangeEnd OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The end of the ip address range, used by DHCP to provide
+ip addresses for the discuvered devices
+
+This field is mandatory for the Proxy Manager in order
+to work correctly"
+::= { prvtProxyManConfigEntry 8 }
+
+prvtProxyManLeasePeriod OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The period for which the mapped devices are available in
+the proxy manager. After it expire, the mapped device
+can request new lease again. Valid range is <0-604800> seconds. Default value is 300."
+::= { prvtProxyManConfigEntry 9 }
+
+prvtProxyManRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This object indicates the state of the configuration entry. It
+is read-only and can not be used to create or destroy or manually change
+the state. Only one configuration entry is supported.
+The only valid values are:
+- notReady(3) - the ProxyManger is not correctly configured and there are some field inconsistencies.
+- acitive(1) - the ProxyManger is configured and the proxy manager is ready to be enabled.
+
+The objects which are checked for consistency are:
+prvtProxyManIpRangeEnd - the ip range should be in the network, defined by the ip address/mask objects
+prvtProxyManIpRangeStart - the ip range should be in the network defined by the ip address/mask objects
+prvtProxyManIpMask - shoudl be valid ip mask
+prvtProxyManIpAddr - should be valid ip address.
+prvtProxyManVlan - the vlan should exists"
+::= { prvtProxyManConfigEntry 10 }
+
+prvtProxySecurityEnabled OBJECT-TYPE
+SYNTAX PrvtProxySecurity
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The attribute is used to specify the proxy security, The default is securityDisabled(1)."
+::= { prvtProxyManConfigEntry 11 }
+
+prvtProxyAcceptInforms OBJECT-TYPE
+SYNTAX PrvtProxyAcceptInformsType
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The attribute is used to specify the accept policy for DHCP Informs messaged. The default if informsDisabled(1)."
+::= { prvtProxyManConfigEntry 12 }
+
+-- Global table for supported protocols
+-- This table contains all the protocols which will be managed by Proxy Managers.
+
+prvtProxyManProtoTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtProxyManProtoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The table of containing all supported protocols,
+which will be processed by an active ProxyManager
+instance
+
+This table is read-only.
+"
+::= { prvtProxyManObjects 3 }
+
+prvtProxyManProtoEntry OBJECT-TYPE
+SYNTAX PrvtProxyManProtoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Each entry represents a hardcoded protocol supported by Proxy Manager."
+INDEX { prvtProxyManProtoIndex }
+::= { prvtProxyManProtoTable 1 }
+
+PrvtProxyManProtoEntry ::= SEQUENCE {
+prvtProxyManProtoIndex PrvtProxyManProtocols,
+prvtProxyManProtoSvcPort Integer32,
+prvtProxyManProtoSvcPortType PrvtProxyManPortTypes,
+prvtProxyManProtoSrcPort Integer32,
+prvtProxyManProtoDirection PrvtProxyManDirection,
+prvtProxyManProtoStatus PrvtProxyManStates
+}
+
+prvtProxyManProtoIndex OBJECT-TYPE
+SYNTAX PrvtProxyManProtocols
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The index of prvtProxyManProtoTable. It is an enumeration
+representing all supported protocols by Proxy Manager"
+::= { prvtProxyManProtoEntry 1 }
+
+prvtProxyManProtoSvcPort OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The object represents the number of the port for the supported standard protocol."
+::= { prvtProxyManProtoEntry 2 }
+
+prvtProxyManProtoSvcPortType OBJECT-TYPE
+SYNTAX PrvtProxyManPortTypes
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The object represents the type of the managed standard port in the
+transport porotocol."
+::= { prvtProxyManProtoEntry 3 }
+
+prvtProxyManProtoSrcPort OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"TBD"
+::= { prvtProxyManProtoEntry 4 }
+
+prvtProxyManProtoDirection OBJECT-TYPE
+SYNTAX PrvtProxyManDirection
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The object identifies direction of the traffic flow (noDirection/inbound/outbound)."
+::= { prvtProxyManProtoEntry 5 }
+
+prvtProxyManProtoStatus OBJECT-TYPE
+SYNTAX PrvtProxyManStates
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object indicates whether the protocol is to be
+managed by Proxy manager - enable(1) or not - disable(2)."
+::= { prvtProxyManProtoEntry 6 }
+
+
+-- Proxy Manager mapping table
+-- This table shows and allow to comfigure mannually the according to the its active mode.
+
+prvtProxyManMappingTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtProxyManMappingEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The table show the mapping between the deiscoverd devices and the ports they are mapped by the proxy manager.
+It is also used to create mannual mappings between devices and ports if the prvtProxyManAutoMapMode is disabled"
+::= { prvtProxyManObjects 4 }
+
+prvtProxyManMappingEntry OBJECT-TYPE
+SYNTAX PrvtProxyManMappingEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Each entry represents a mapped device to a port."
+INDEX {prvtProxyManMappingDevice, prvtProxyManMappingIndex, prvtProxyManMappingProto }
+::= { prvtProxyManMappingTable 1 }
+
+PrvtProxyManMappingEntry ::= SEQUENCE {
+prvtProxyManMappingDevice Unsigned32,
+prvtProxyManMappingIndex Unsigned32,
+prvtProxyManMappingProto PrvtProxyManProtocols,
+prvtProxyManMappingDirection PrvtProxyManDirection,
+prvtProxyManMappingGlobalPort Integer32,
+prvtProxyManMappingLocalSrcPort Integer32,
+prvtProxyManMappingLocalDstPort Integer32,
+prvtProxyManMappingRowStatus RowStatus,
+prvtProxyManMappingMAC MacAddress,
+prvtProxyManMappingIfIndex Integer32,
+prvtProxyManMappingAuthenticated PrvtProxyManAuthentication
+}
+
+prvtProxyManMappingDevice OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The object represents the id of the deiscovered device in the LAN.
+It is index in the prvtProxyManMappingTable"
+::= { prvtProxyManMappingEntry 1 }
+
+prvtProxyManMappingIndex OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The object represents the index of the mapping entry.
+It is unique per device and is index in the prvtProxyManMappingTable"
+::= { prvtProxyManMappingEntry 2 }
+
+prvtProxyManMappingProto OBJECT-TYPE
+SYNTAX PrvtProxyManProtocols
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The object represents the protocol, which will be processed.
+It is index in prvtProxyManMappingTable. "
+::= { prvtProxyManMappingEntry 3 }
+
+prvtProxyManMappingDirection OBJECT-TYPE
+SYNTAX PrvtProxyManDirection
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The object identifies the traffic flow direction.(inbound/outbound)."
+::= { prvtProxyManMappingEntry 4 }
+
+prvtProxyManMappingGlobalPort OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"TBD"
+::= { prvtProxyManMappingEntry 5 }
+
+prvtProxyManMappingLocalSrcPort OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"TBD "
+::= { prvtProxyManMappingEntry 6 }
+
+prvtProxyManMappingLocalDstPort OBJECT-TYPE
+SYNTAX Integer32 (1..65535)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"TBD"
+::= { prvtProxyManMappingEntry 7 }
+
+prvtProxyManMappingRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Indicates the state of the mapping entry.
+- notReady(3) - the mapping entry is not configured yet
+- notInService(3) - the mapping entry is configured but the configuration is not applied yet
+- acitive(3) - the mapping entry is configured and the configuration is applied
+
+The objects which need to be configured in order
+to apply the cinfiguration are:
+prvtProxyManMappingMAC
+prvtProxyManMappingPort"
+::= { prvtProxyManMappingEntry 8 }
+
+prvtProxyManMappingMAC OBJECT-TYPE
+SYNTAX MacAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The mac address of the managed device.
+
+This field is manadatory"
+::= { prvtProxyManMappingEntry 9 }
+
+prvtProxyManMappingIfIndex OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object shows the ifIndex associated with the managed device."
+::= { prvtProxyManMappingEntry 10 }
+
+prvtProxyManMappingAuthenticated OBJECT-TYPE
+SYNTAX PrvtProxyManAuthentication
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object shows the authenticated state of the managed device."
+::= { prvtProxyManMappingEntry 11 }
+
+prvtProxyManagerNewDevice NOTIFICATION-TYPE
+OBJECTS {
+prvtProxyManDeviceAddress
+}
+STATUS current
+DESCRIPTION
+"This notification is triggered, when a new managed device is descovered
+and added in the proxy manager's list"
+::= { prvtProxyManNotifications 1 }
+
+prvtProxyManagerRemovedDevice NOTIFICATION-TYPE
+OBJECTS {
+prvtProxyManDeviceAddress
+}
+STATUS current
+DESCRIPTION
+"This notification is triggered, when a managed device is removed from
+the proxy manager's list"
+::= { prvtProxyManNotifications 2 }
+
+prvtProxyManagerUnauthenticatedDevice NOTIFICATION-TYPE
+OBJECTS {
+prvtProxyManDeviceAddress
+}
+STATUS current
+DESCRIPTION
+"This notification is triggered, when a managed device failed to be authenticated from
+the proxy manager's list"
+::= { prvtProxyManNotifications 3 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-PW-TDM-MIB b/MIBS/telco-systems/binos/PRVT-PW-TDM-MIB
new file mode 100644
index 0000000..32851f6
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-PW-TDM-MIB
@@ -0,0 +1,1514 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-PW-TDM-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-PW-TDM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Integer32,
+Counter32,
+Unsigned32,
+Gauge32,
+IpAddress
+FROM SNMPv2-SMI
+
+MODULE-COMPLIANCE, NOTIFICATION-GROUP,
+OBJECT-GROUP
+FROM SNMPv2-CONF
+
+TEXTUAL-CONVENTION,
+TruthValue,
+RowStatus,
+StorageType,
+TimeStamp
+FROM SNMPv2-TC
+
+NOTIFICATION-TYPE, transmission
+          FROM SNMPv2-SMI                    -- [RFC2578]
+
+InterfaceIndexOrZero
+FROM IF-MIB
+
+PerfCurrentCount,
+PerfIntervalCount
+FROM PerfHist-TC-MIB
+ 
+PortList
+FROM Q-BRIDGE-MIB
+ 
+switch FROM PRVT-SWITCH-MIB; 
+ 
+ 
+
+-- The TDM MIB
+
+prvtPwVcTDMMIB MODULE-IDENTITY
+
+LAST-UPDATED "200907070000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB contains managed object definitions for
+encapsulating TDM (T1,E1, T3, E3, NxDS0) as
+pseudo-wires over packet-switching networks (PSN)."
+
+-- revision history       
+REVISION "201902270000Z"
+DESCRIPTION
+"Update interval values for :
+ prvtPwVcTDMCfgPeerPort
+ prvtPwVcTDMCfgLocalPort
+ prvtPwVcTDMCfgOosPort
+ prvtPwVcTDMCfgPeerOosPort"
+ 
+REVISION "200907070000Z"
+DESCRIPTION
+"Change the range for prvtPwVcTDMCfgChannelGroup in order 
+to support all configurable channels group  for OC3 module" 
+
+REVISION "200907010000Z"
+DESCRIPTION
+"Added prvtPwVcTDMCfgRtpOosPayload and prvtPwVcTDMCfgRtpPayload objects." 
+
+  
+REVISION "200903060000Z"
+DESCRIPTION
+"Added MPLS objects." 
+
+
+REVISION "200903050000Z"
+DESCRIPTION
+"Added Destination Oos Port "  
+
+
+REVISION "200902180000Z"
+DESCRIPTION
+"Added prvtPwVcTDMCfgIpTos, prvtPwVcTDMCfgIpOosTos"  
+ 
+REVISION "200901150000Z"
+DESCRIPTION
+"Added prvtPwVcTDMCfgInterface, prvtTDMChannelGrpOC3TimeSlots"         
+
+REVISION "200806190000Z" 
+DESCRIPTION
+"Added prvtPwVcTDMClearCircuitStatistics, prvtPwVcTDMCfgRtp,
+prvtPwVcTDMCfgOosPort, prvtPwVcTDMCfgPayloadSuppression"
+
+REVISION "200607240000Z" 
+DESCRIPTION
+"Added Oos Ecid and Vlan priotity objects."
+
+::= { prvtPwVc 2 } 
+
+prvtPwVc OBJECT IDENTIFIER ::= { switch 200 }
+
+-- Local Textual conventions
+PrvtPwVcTDMCfgIndex ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"Index into any of the relevant prvtPwVcXXXCfgTable."
+SYNTAX Unsigned32 
+
+TimeSlotList ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"Each octet within this value specifies a time slot included
+in the give channel group. There should be 32 bits of 4 octets for each 
+port of the CES module. Note that if the line type is set to T1 only
+the first 24 bits of each 4 octests can be set. The most significant bit 
+of the list indicates timeslot 1 of port 1, the 33th bit - timeslot 1 of port 2, etc.
+If the bit is set, the port is included in the given channel group."
+SYNTAX OCTET STRING
+ 
+PrvtPwVcTDMCfgInterface ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"Interface of the given circuit used in TDM config for OC3 modules " 
+SYNTAX IpAddress
+
+
+InterfaceTimeSlot ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"The first 4 octets of this value represent the interface of 
+the given channel group P.K.L.M.The last 32 bits of the
+4 octets represent a bitmask of the time slots"
+SYNTAX OCTET STRING
+
+-- Tables, Scalars
+prvtPwVcTDMObjects OBJECT IDENTIFIER
+::= { prvtPwVcTDMMIB 1 }
+-- Notifications
+prvtPwVcTDMTraps OBJECT IDENTIFIER
+::= { prvtPwVcTDMMIB 2 }
+
+-- Conformance
+prvtPwVcTDMConformance OBJECT IDENTIFIER
+::= { prvtPwVcTDMMIB 3 }
+
+-- TDM PW table
+
+prvtPwVcTDMTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtPwVcTDMEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains basic information including ifIndex,
+and pointers to entries in the relevant TDM config
+tables for this TDM PW."
+::= { prvtPwVcTDMObjects 1 }
+
+prvtPwVcTDMEntry OBJECT-TYPE
+SYNTAX PrvtPwVcTDMEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table is indexed by the same index that was
+created for the associated entry in the PW Table
+(in the PW-STD-MIB).
+An entry is created in this table by the agent for every
+entry in the prvtPwVcTable with a prvtPwVcType of 'TDM'."
+
+INDEX { prvtPwVcTDMModuleId, prvtPwVcTDMCircuitId }
+
+::= { prvtPwVcTDMTable 1 }
+
+PrvtPwVcTDMEntry ::= SEQUENCE {
+prvtPwVcTDMModuleId INTEGER, 
+prvtPwVcTDMCircuitId INTEGER, 
+prvtPwVcTDMType INTEGER,
+prvtPwVcRelTDMCfgIndex PrvtPwVcTDMCfgIndex,
+prvtPwVcTDMTimeElapsed Integer32,
+prvtPwVcTDMValidIntervals Integer32,
+prvtPwVcTDMCurrentIndications BITS,
+prvtPwVcTDMLatchedIndications BITS,
+prvtPwVcTDMLastEsTimeStamp TimeStamp,
+prvtPwVcTDMEmulationMode INTEGER,
+prvtPwVcTDMOperStatus INTEGER,
+prvtPwVcTDMClearCircuitStatistics INTEGER
+} 
+prvtPwVcTDMModuleId OBJECT-TYPE
+SYNTAX INTEGER (1..65535)
+MAX-ACCESS read-only
+STATUS current 
+DESCRIPTION 
+"The ID of the CES Module where the crcuit is configured. "
+::= { prvtPwVcTDMEntry 1 } 
+
+prvtPwVcTDMCircuitId OBJECT-TYPE
+SYNTAX INTEGER (1..65535)
+MAX-ACCESS read-only
+STATUS current 
+DESCRIPTION 
+"The ID of the CES Circuit that this PW represents. "
+::= { prvtPwVcTDMEntry 2 } 
+
+prvtPwVcTDMType OBJECT-TYPE
+SYNTAX INTEGER {
+
+other (1),
+ds1 (2),
+e1 (3),
+ds3 (4),
+e3 (5),
+octetAlignedT1 (6),
+nXds0 (7),
+nXds0WithCASe1 (8),
+nXds0WithCASds1Esf (9),
+nXds0WithCASds1Sf (10)
+
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Specifies the type of TDM PW. The connection assumed to be
+symmetrical having the same value at both ends. To identify
+structured vs. unstructured type for DS1 and E1, dsx1LineType
+and dsx1SignalMode [DS1MIB] should be referenced. DS3 and E3
+are always unstructured. "
+DEFVAL { e1 }
+::= { prvtPwVcTDMEntry 3 }
+
+prvtPwVcRelTDMCfgIndex OBJECT-TYPE
+SYNTAX PrvtPwVcTDMCfgIndex
+MAX-ACCESS read-only 
+STATUS current
+DESCRIPTION
+"Index to the relevant TDM configuration table entry
+that appears in one of the related MIB modules
+such as SAToP,TDMoIP or CESoPSN. It is likely that
+multiple TDM PWs of the same characteristic will share
+a single configuration entry of the relevant type."
+::= { prvtPwVcTDMEntry 4 }
+
+prvtPwVcTDMTimeElapsed OBJECT-TYPE
+SYNTAX Integer32 (1..900)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of seconds, including partial seconds,
+that have elapsed since the beginning of the current
+measurement period. If, for some reason, such as an
+adjustment in the system's time-of-day clock, the
+current interval exceeds the maximum value, the
+agent will return the maximum value."
+::= { prvtPwVcTDMEntry 5}
+
+prvtPwVcTDMValidIntervals OBJECT-TYPE
+SYNTAX Integer32 (0..96)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of previous 15-minute intervals for which data
+was collected.
+An agent with TDM capability must be capable of supporting
+at least n intervals. The minimum value of n is 4, The
+default of n is 32 and the maximum value of n is 96.
+The value will be <n> unless the measurement was (re-)
+started within the last (<n>*15) minutes, in which case
+the value will be the number of complete 15 minute
+intervals for which the agent has at least some data.
+In certain cases(e.g., in the case where the agent is
+a proxy) it is possible that some intervals are unavailable.
+In this case, this interval is the maximum interval number
+for which data is available. "
+::= { prvtPwVcTDMEntry 6}
+
+prvtPwVcTDMCurrentIndications OBJECT-TYPE
+SYNTAX BITS {
+other ( 0),
+strayPacket ( 1),
+malformedPacket ( 2),
+excessivePktLossRate( 3),
+bufferOverrun ( 4),
+bufferUnderrun ( 5),
+remotePktLoss ( 6),
+packetLoss ( 7),
+tdmFault ( 8),
+packetsLbitCounter ( 9),
+packetsRbitCounter (10)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The following defects should be detected and reported
+upon request:
+
+-Stray packets MAY be detected by the PSN and multiplexing
+layers. Stray packets MUST be discarded by the CE-bound IWF
+and their detection MUST NOT affect mechanisms for detection
+of packet loss.
+
+-Malformed packets are detected by mismatch between the
+expected packet size (taking the value of the L bit into
+account) and the actual packet size inferred from the PSN and
+multiplexing layers. Malformed in-order packets MUST be
+discarded by the CE-bound IWF and replacement data generated
+as for lost packets.
+
+-Excessive packet loss rate is detected by computing the
+average packet loss rate over the value of
+prvtPwVcTDMAvePktLossTimeWindow and comparing it with a
+preconfigured threshold [SATOP].
+
+-Buffer overrun is detected in the normal operation state
+when the CE bound IWF's jitter buffer cannot accommodate
+newly arrived packets.
+
+-Remote packet loss is indicated by reception of packets with
+their R bit set.
+
+-Packet misorder is detected by looking at the Sequence
+number provided by the control word.
+
+-TDM Fault, if L bit in the control word is set, it indicates
+that TDM data carried in the payload is invalid due an
+attachment circuit fault. When the L bit is set the payload
+MAY be omitted in order to conserve bandwidth.
+
+Note: the algorithm used to capture these indications
+is implementation specific."
+::= { prvtPwVcTDMEntry 7}
+
+prvtPwVcTDMLatchedIndications OBJECT-TYPE
+SYNTAX BITS {
+other ( 0),
+staryPacket ( 1),
+malformedPacket ( 2),
+excessivePktLossRate( 3),
+bufferOverrun ( 4),
+bufferUnderrun ( 5),
+remotePktLoss ( 6),
+packetLoss ( 7),
+tdmFault ( 8),
+packetsLbitCounter ( 9),
+packetsRbitCounter (10)
+}
+
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The state of TDM indicators when the TDM PW last declared
+an error second (either as ES, SES or a second with
+errors inside a UAS) condition. At this time, only LOPS
+can create a failure. Since indicators other than LOPS are
+useful, all are latched here. For bit definitions, see
+prvtPwVcTDMCurrentIndications above.
+
+Note: the algorithm used to latch these indications when
+entering an defect state is implementation specific."
+::= { prvtPwVcTDMEntry 8}
+
+prvtPwVcTDMLastEsTimeStamp OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of sysUpTime on the most recent occasion at
+which the TDM PW entered the ES or SES state."
+::= { prvtPwVcTDMEntry 9} 
+
+prvtPwVcTDMEmulationMode OBJECT-TYPE
+SYNTAX INTEGER
+{
+undefined ( 0),
+structured ( 1),
+unstuctured ( 2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The circuit emulation mode."
+
+::= {prvtPwVcTDMEntry 10 } 
+
+prvtPwVcTDMOperStatus OBJECT-TYPE
+SYNTAX INTEGER
+{
+up (1),
+down (2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The operational status of the circuit."
+
+::= {prvtPwVcTDMEntry 11 } 
+
+prvtPwVcTDMClearCircuitStatistics OBJECT-TYPE
+SYNTAX INTEGER {
+none ( 0 ),
+clear ( 1 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Clear circuit statistics."
+::= {prvtPwVcTDMEntry 12 }
+
+
+
+-- End of TDM PW table
+
+-- PW Generic TDM PW Configuration Table
+
+prvtPwVcTDMCfgTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtPwVcTDMCfgEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains a set of parameters that may be
+referenced by one or more TDM PWs in prvtPwVcTDMTable."
+
+::= { prvtPwVcTDMObjects 3 }
+
+prvtPwVcTDMCfgEntry OBJECT-TYPE
+SYNTAX PrvtPwVcTDMCfgEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"These parameters define the characteristics of a
+TDM PW. They are grouped here to ease NMS burden.
+Once an entry is created here it may be re-used
+by many PWs."
+
+INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId }
+
+::= { prvtPwVcTDMCfgTable 1 }
+
+PrvtPwVcTDMCfgEntry ::= SEQUENCE { 
+prvtPwVcTDMCfgPayloadSize Unsigned32,
+prvtPwVcTDMCfgPktReorder TruthValue,
+prvtPwVcTDMCfgRtpHdrUsed TruthValue,
+prvtPwVcTDMCfgJtrBfrDepth Unsigned32,
+prvtPwVcTDMCfgChannelGroup INTEGER,
+prvtPwVcTDMCfgPorts OCTET STRING,
+prvtPwVcTDMCfgPeerIpType INTEGER,
+prvtPwVcTDMCfgPeerIpAddress IpAddress,
+prvtPwVcTDMCfgPeerPort INTEGER, 
+prvtPwVcTDMCfgPeerMAC OCTET STRING, 
+prvtPwVcTDMCfgPeerEcid INTEGER,
+prvtPwVcTDMCfgPeerOosEcid INTEGER,
+prvtPwVcTDMCfgVlanId INTEGER, 
+prvtPwVcTDMCfgVlanPrio INTEGER, 
+prvtPwVcTDMCfgLocalPort INTEGER, 
+prvtPwVcTDMCfgEcid INTEGER,
+prvtPwVcTDMCfgOosEcid INTEGER,
+prvtPwVcTDMCfgProtocol INTEGER, 
+prvtPwVcTDMCfgAdminStatus INTEGER,
+prvtPwVcTDMCfgRowStatus RowStatus,    
+prvtPwVcTDMCfgRtp INTEGER,
+prvtPwVcTDMCfgOosPort Unsigned32,
+prvtPwVcTDMCfgPayloadSuppression INTEGER,
+prvtPwVcTDMCfgInterface PrvtPwVcTDMCfgInterface,
+prvtPwVcTDMCfgIpTos INTEGER,
+prvtPwVcTDMCfgIpOosTos INTEGER,
+prvtPwVcTDMCfgPeerOosPort INTEGER,
+prvtPwVcTDMCfgMplsLocalLabel Unsigned32,
+prvtPwVcTDMCfgMplsPeerLabel Unsigned32,
+prvtPwVcTDMCfgMplsTTL INTEGER,  
+prvtPwVcTDMCfgMplsExp INTEGER,    
+prvtPwVcTDMCfgMplsOosLocalLabel Unsigned32,
+prvtPwVcTDMCfgMplsOosPeerLabel Unsigned32,      
+prvtPwVcTDMCfgMplsOosTTL INTEGER,
+prvtPwVcTDMCfgMplsOosExp INTEGER   ,
+prvtPwVcTDMCfgRtpOosPayload INTEGER,
+prvtPwVcTDMCfgRtpPayload INTEGER
+
+}
+
+prvtPwVcTDMCfgPayloadSize OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The value of this object indicates the PayLoad Size to
+be defined during the PW setUp. Upon TX, implementation
+must be capable of carrying that amount of data.
+Upon RX, When the LEN field is set to 0, the payload of
+packet MUST assume this size, and if the actual
+packet size is inconsistent with this length,
+the packet MUST be considered to be malformed. "
+::= { prvtPwVcTDMCfgEntry 1 }
+
+prvtPwVcTDMCfgPktReorder OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"If set True: as CE bound packets are queued in the
+jitter buffer, out of order packets are re-ordered. The
+maximum sequence number differential (i.e., the range in
+which re-sequencing can occur) is dependant on the depth
+of the jitter buffer. See prvtPwVcTDMCfgJtrBfrDepth.
+
+NOTE: Some implementations may not support this feature.
+The agent is then required to set this False."
+::= { prvtPwVcTDMCfgEntry 2 }
+
+prvtPwVcTDMCfgRtpHdrUsed OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"If set False: an RTP header is not pre-pended to the
+TDM packet."
+REFERENCE
+"See [SATOP]"
+DEFVAL { false }
+
+::= { prvtPwVcTDMCfgEntry 3 }
+
+prvtPwVcTDMCfgJtrBfrDepth OBJECT-TYPE
+SYNTAX Unsigned32 (1..200)
+UNITS "millisecond"
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The size of the Jitter buffer SHOULD be defined to
+a value that is capable to allow accommodation to the
+PSN-specific packet delay variation.
+
+If configured to a value not supported by the
+implementation, the agent MUST return an error code
+'jtrBfrDepth' in 'prvtPwVcTDMConfigError '
+
+NOTE: jitter buffers are a limited resource to
+be managed."
+DEFVAL { 3 }
+
+::= { prvtPwVcTDMCfgEntry 4 }
+
+
+
+prvtPwVcTDMCfgChannelGroup OBJECT-TYPE
+SYNTAX INTEGER  (1..128)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The circuit's channel group. This object is only valid if structured emulation mode is used.
+If a group is not set the value of the object is 0."
+
+::= { prvtPwVcTDMCfgEntry 5 } 
+
+prvtPwVcTDMCfgPorts OBJECT-TYPE
+SYNTAX OCTET STRING
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"A bitmap of themodule's TDM ports belongng to the circuit. "
+::= { prvtPwVcTDMCfgEntry 6 } 
+
+prvtPwVcTDMCfgPeerIpType OBJECT-TYPE
+SYNTAX INTEGER 
+{
+ipv4(4),
+ipv6(6),
+dns(16)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The type of the peer's IP address. "
+::= { prvtPwVcTDMCfgEntry 7 }
+
+prvtPwVcTDMCfgPeerIpAddress OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The peer's IP address. "
+::= { prvtPwVcTDMCfgEntry 8 } 
+
+prvtPwVcTDMCfgPeerPort OBJECT-TYPE
+SYNTAX INTEGER (0..65535)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The connection port. "
+::= { prvtPwVcTDMCfgEntry 9 } 
+
+prvtPwVcTDMCfgPeerMAC OBJECT-TYPE
+SYNTAX OCTET STRING 
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The Peer MAC address. This object is only valid for Metro-Ethernet and Mpls circuits.
+If an IP address is configured for the circuit, this object will display
+the resolved MAC address."
+::= { prvtPwVcTDMCfgEntry 10 } 
+
+prvtPwVcTDMCfgPeerEcid OBJECT-TYPE
+SYNTAX INTEGER 
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The peer circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. "
+::= { prvtPwVcTDMCfgEntry 11 } 
+
+prvtPwVcTDMCfgPeerOosEcid OBJECT-TYPE
+SYNTAX INTEGER 
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The peer circuit identifier for the out-of-band signaling. This value is valid only when the object
+prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernet"
+::= { prvtPwVcTDMCfgEntry 12 } 
+
+prvtPwVcTDMCfgVlanId OBJECT-TYPE
+SYNTAX INTEGER (2..4094)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The circuit Vlan ID. "
+::= { prvtPwVcTDMCfgEntry 13 } 
+
+prvtPwVcTDMCfgVlanPrio OBJECT-TYPE
+SYNTAX INTEGER (0..7)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The prioirty for the VLAN set here, when the protocol for the circuit is metro-ethernet"
+::= { prvtPwVcTDMCfgEntry 14 } 
+
+prvtPwVcTDMCfgLocalPort OBJECT-TYPE
+SYNTAX INTEGER (0..65535)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Local UDP port. "
+::= { prvtPwVcTDMCfgEntry 15 } 
+
+
+prvtPwVcTDMCfgEcid OBJECT-TYPE
+SYNTAX INTEGER 
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The local circuit identifier. This object is only valid if the Circuit protocol is metro-ethernet. "
+::= { prvtPwVcTDMCfgEntry 16 } 
+
+prvtPwVcTDMCfgOosEcid OBJECT-TYPE
+SYNTAX INTEGER 
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The local circuit identifier for the out-of-band signaling. This value is valid only when the object
+prvtPwVcTDMCfgEcid is set and when the current protocol is metro-ethernet"
+::= { prvtPwVcTDMCfgEntry 17 } 
+
+prvtPwVcTDMCfgProtocol OBJECT-TYPE
+SYNTAX INTEGER 
+{
+undefined(0),
+satop(1),
+cesopsn(2),
+metro-ethernet(3),
+mpls (4)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The emulation protocol."
+::= { prvtPwVcTDMCfgEntry 18 } 
+
+prvtPwVcTDMCfgAdminStatus OBJECT-TYPE
+SYNTAX INTEGER
+{
+enable(1),
+disable(2)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The administrative status of the circuit."
+::= { prvtPwVcTDMCfgEntry 19 }
+
+
+prvtPwVcTDMCfgRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This field is used to create and destroy TDM circuits."
+::= { prvtPwVcTDMCfgEntry 20 }   
+
+
+prvtPwVcTDMCfgRtp OBJECT-TYPE
+SYNTAX INTEGER {
+true ( 1 ),
+false ( 2 )
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"TRTP header."
+::= { prvtPwVcTDMCfgEntry 21 } 
+
+
+prvtPwVcTDMCfgOosPort OBJECT-TYPE
+SYNTAX Unsigned32 (0..65535)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Oos port."
+::= { prvtPwVcTDMCfgEntry 22 } 
+
+
+
+prvtPwVcTDMCfgPayloadSuppression OBJECT-TYPE
+SYNTAX INTEGER {
+enable ( 1 ),
+disable ( 2 )
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Controls payload suppression. Object does not require module to be restarted."
+::= { prvtPwVcTDMCfgEntry 23 } 
+
+
+prvtPwVcTDMCfgInterface   OBJECT-TYPE 
+SYNTAX PrvtPwVcTDMCfgInterface 
+MAX-ACCESS  read-create
+STATUS current
+DESCRIPTION
+"Interface used for configuring OC3 TDM circuits 
+P - Port Number, K,L,M standard numbering of SONET/SDH."
+::= {prvtPwVcTDMCfgEntry 24}      
+
+
+prvtPwVcTDMCfgIpTos		OBJECT-TYPE 
+SYNTAX	INTEGER  (0..255)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Set/Show IP TOS information" 
+::= { prvtPwVcTDMCfgEntry 25 }    
+
+
+prvtPwVcTDMCfgIpOosTos	OBJECT-TYPE 
+SYNTAX	INTEGER  (0..255)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Set/Show IP Out Of Stream information" 
+::= { prvtPwVcTDMCfgEntry 26 }    
+ 
+ 
+prvtPwVcTDMCfgPeerOosPort OBJECT-TYPE
+SYNTAX INTEGER (0..65535)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This field is used to SET Destination Oos Port"
+::= { prvtPwVcTDMCfgEntry 27 } 
+
+
+prvtPwVcTDMCfgMplsLocalLabel OBJECT-TYPE
+SYNTAX Unsigned32 (0..1048575)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The local circuit identifier. This object is only valid if the Circuit protocol is MPLS "  
+DEFVAL { 15 }
+::= { prvtPwVcTDMCfgEntry 28 }
+
+prvtPwVcTDMCfgMplsPeerLabel OBJECT-TYPE
+SYNTAX Unsigned32 (0..1048575)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The peer circuit identifier. This object is only valid if the Circuit protocol is MPLS "
+DEFVAL { 15 }
+::= { prvtPwVcTDMCfgEntry 29 }        
+
+prvtPwVcTDMCfgMplsTTL OBJECT-TYPE
+SYNTAX INTEGER (2..255)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"MPLS TTL "   
+DEFVAL { 255 }
+::= { prvtPwVcTDMCfgEntry 30 }               
+
+prvtPwVcTDMCfgMplsExp OBJECT-TYPE
+SYNTAX INTEGER (0..7)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"MPLS EXP " 
+DEFVAL { 0 }
+::= { prvtPwVcTDMCfgEntry 31 }
+
+prvtPwVcTDMCfgMplsOosLocalLabel OBJECT-TYPE
+SYNTAX Unsigned32 (0..1048575)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The local circuit identifier  for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS "
+DEFVAL { 255 }
+::= { prvtPwVcTDMCfgEntry 32 } 
+
+prvtPwVcTDMCfgMplsOosPeerLabel OBJECT-TYPE
+SYNTAX Unsigned32 (0..1048575)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"The peer circuit identifier  for the out-of-band signaling. This object is only valid if the Circuit protocol is MPLS "
+DEFVAL { 255 }
+::= { prvtPwVcTDMCfgEntry 33 }
+
+prvtPwVcTDMCfgMplsOosTTL OBJECT-TYPE
+SYNTAX INTEGER (2..255)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"MPLS TTL for the out-of-band signaling."       
+DEFVAL { 255 }
+::= { prvtPwVcTDMCfgEntry 34 }     
+
+
+prvtPwVcTDMCfgMplsOosExp OBJECT-TYPE
+SYNTAX INTEGER (0..7)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"MPLS EXP for the out-of-band signaling."
+DEFVAL { 0 }
+::= { prvtPwVcTDMCfgEntry 35 }     
+
+
+prvtPwVcTDMCfgRtpOosPayload OBJECT-TYPE
+SYNTAX INTEGER (0..127)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This field is used to SET RTP Oos payload type."
+::= { prvtPwVcTDMCfgEntry 36 }
+
+prvtPwVcTDMCfgRtpPayload OBJECT-TYPE
+SYNTAX INTEGER (0..127)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"This field is used to SET RTP payload type."
+::= { prvtPwVcTDMCfgEntry 37 }
+
+
+
+
+-- Channel group table --
+prvtTDMChannelGrpTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtTDMChannelGrpEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains the set of available channel groups."
+
+::= { prvtPwVcTDMObjects 4 } 
+
+prvtTDMChannelGrpEntry OBJECT-TYPE
+SYNTAX PrvtTDMChannelGrpEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"These parameters are used to configure a CES channel group."
+
+INDEX { prvtTDMChannelGrpModuleID, prvtTDMChannelGrpID }
+
+::= { prvtTDMChannelGrpTable 1 }
+
+
+PrvtTDMChannelGrpEntry ::= SEQUENCE { 
+prvtTDMChannelGrpModuleID Unsigned32,
+prvtTDMChannelGrpID Unsigned32,
+prvtTDMChannelGrpCfgError INTEGER, 
+prvtTDMChannelGrpTimeSlots TimeSlotList,
+prvtTDMChannelGrpOC3TimeSlots InterfaceTimeSlot 
+}
+
+prvtTDMChannelGrpModuleID OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The index of the module to which this channel group belongs. "
+::= { prvtTDMChannelGrpEntry 1 }
+
+prvtTDMChannelGrpID OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The channel group ID."
+::= { prvtTDMChannelGrpEntry 2 }
+
+prvtTDMChannelGrpCfgError OBJECT-TYPE
+SYNTAX INTEGER {
+noError(0),
+channelGroupAtached(1)
+}
+
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object displays the correctness of the configuration. If it has a value of 
+channelGroupAtached(1) this channel group has been attached to a circuit and the 
+new configuration cannot be applied."
+::= { prvtTDMChannelGrpEntry 3 }
+
+prvtTDMChannelGrpTimeSlots OBJECT-TYPE
+SYNTAX TimeSlotList 
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object is used to configure  which time slots are members of the given
+channel group."
+::= { prvtTDMChannelGrpEntry 4 }
+
+prvtTDMChannelGrpOC3TimeSlots OBJECT-TYPE
+SYNTAX InterfaceTimeSlot 
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object is used to configure  interface and time slots  for the given channel
+group in OC3 module."
+::= { prvtTDMChannelGrpEntry 5 }
+
+
+
+-- END of Table
+
+-- TDM PW Performance Current Table.
+
+prvtPwVcTDMPerfCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtPwVcTDMPerfCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The current 15 minute interval counts are in
+this table.
+
+This table provides per TDM PW performance information."
+
+::= { prvtPwVcTDMObjects 5 }
+
+prvtPwVcTDMPerfCurrentEntry OBJECT-TYPE
+SYNTAX PrvtPwVcTDMPerfCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in this table is created by the agent for every
+prvtPwVcTDM entry. After 15 minutes, the contents of this table
+entry are copied to a new entry in the prvtPwVcTDMPerfInterval
+table and the counts in this entry are reset to zero."
+
+INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId }
+
+::= { prvtPwVcTDMPerfCurrentTable 1 }
+
+PrvtPwVcTDMPerfCurrentEntry ::= SEQUENCE {
+
+prvtPwVcTDMPerfCurrentPktsOoseq Counter32,
+prvtPwVcTDMPerfCurrentJtrBfrUnderruns Counter32,
+prvtPwVcTDMPerfCurrentJtrBfrOverruns Counter32,
+prvtPwVcTDMPerfCurrentMalformedPkt Counter32,
+prvtPwVcTDMPerfCurrentNearEndFC Counter32,
+prvtPwVcTDMPerfCurrentFarEndFC Counter32
+}
+
+prvtPwVcTDMPerfCurrentPktsOoseq OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected out of sequence (via TDM
+header sequence numbers), but successfully re-ordered.
+Note: some implementations may not support this
+Feature."
+::= { prvtPwVcTDMPerfCurrentEntry 1 }
+
+prvtPwVcTDMPerfCurrentJtrBfrUnderruns OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of times a packet needed to be played
+out and the jitter buffer was empty."
+::= { prvtPwVcTDMPerfCurrentEntry 2 }
+
+prvtPwVcTDMPerfCurrentJtrBfrOverruns OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected out of range (via TDM
+header sequence numbers), and could not be re-
+ordered, or could not fit in the jitter buffer."
+::= { prvtPwVcTDMPerfCurrentEntry 3 }
+
+prvtPwVcTDMPerfCurrentMalformedPkt OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected with unexpected size, or
+bad headers' stack"
+::= { prvtPwVcTDMPerfCurrentEntry 4 }
+
+prvtPwVcTDMPerfCurrentNearEndFC OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of local packet failures."
+::= { prvtPwVcTDMPerfCurrentEntry 5 }
+
+prvtPwVcTDMPerfCurrentFarEndFC OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of remote packet failures."
+::= { prvtPwVcTDMPerfCurrentEntry 6 }
+
+
+-- End TDM PW Performance Current Interval Table
+
+-- TDM PW Performance Interval Table.
+
+prvtPwVcTDMPerfIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtPwVcTDMPerfIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table provides performance information per TDM PW
+similar to the prvtPwVcTDMPerfCurrentTable above. However,
+these counts represent historical 15 minute intervals.
+Typically, this table will have a maximum of 96 entries
+for a 24 hour period, but is not limited to this. "
+::= { prvtPwVcTDMObjects 6 }
+
+prvtPwVcTDMPerfIntervalEntry OBJECT-TYPE
+SYNTAX PrvtPwVcTDMPerfIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in this table is created by the agent for
+every prvtPwVcTDMPerfCurrentEntry that is 15 minutes old.
+The contents of the Current entry are copied to the new
+entry here. The Current entry, then resets its counts
+to zero for the next current 15 minute interval. "
+
+INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId, prvtPwVcTDMPerfIntervalNumber }
+
+::= { prvtPwVcTDMPerfIntervalTable 1 }
+
+PrvtPwVcTDMPerfIntervalEntry ::= SEQUENCE {
+prvtPwVcTDMPerfIntervalNumber Unsigned32,
+prvtPwVcTDMPerfIntervalValidData TruthValue,
+prvtPwVcTDMPerfIntervalDuration Integer32,
+
+prvtPwVcTDMPerfIntervalPktsOoseq Counter32,
+prvtPwVcTDMPerfIntervalJtrBfrUnderruns Counter32,
+prvtPwVcTDMPerfIntervalJtrBfrOverruns Counter32,
+prvtPwVcTDMPerfIntervalMalformedPkt Counter32,
+prvtPwVcTDMPerfIntervalNearEndFC Counter32,
+prvtPwVcTDMPerfIntervalFarEndFC Counter32
+
+}
+
+prvtPwVcTDMPerfIntervalNumber OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A number (normally between 1 and 96 to cover a 24 hour
+period) which identifies the interval for which the set
+of statistics is available. The interval identified by 1
+is the most recently completed 15 minute interval, and
+the interval identified by N is the interval immediately
+preceding the one identified by N-1. The minimum range of
+N is 1 through 4. The default range is 1 through 32. The
+maximum value of N is 1 through 96."
+::= { prvtPwVcTDMPerfIntervalEntry 1 }
+
+prvtPwVcTDMPerfIntervalValidData OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This variable indicates if the data for this interval
+is valid."
+::= { prvtPwVcTDMPerfIntervalEntry 2 }
+
+prvtPwVcTDMPerfIntervalDuration OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+
+"The duration of a particular interval in seconds,
+Adjustments in the system's time-of-day clock, may
+cause the interval to be greater or less than, the
+normal value. Therefore this actual interval value
+is provided."
+::= { prvtPwVcTDMPerfIntervalEntry 3 }
+
+prvtPwVcTDMPerfIntervalPktsOoseq OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected out of sequence (via TDM
+header sequence numbers), but successfully re-ordered.
+Note: some implementations mat not support this
+feature."
+::= { prvtPwVcTDMPerfIntervalEntry 4 }
+
+prvtPwVcTDMPerfIntervalJtrBfrUnderruns OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of times a packet needed to be played
+out and the jitter buffer was empty."
+::= { prvtPwVcTDMPerfIntervalEntry 5 }
+
+prvtPwVcTDMPerfIntervalJtrBfrOverruns OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected out of range (via TDM
+header sequence numbers), and could not be re-
+ordered, or could not fit in the jitter buffer."
+::= { prvtPwVcTDMPerfIntervalEntry 6 }
+
+prvtPwVcTDMPerfIntervalMalformedPkt OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected with unexpected size, or
+bad headers' stack"
+::= { prvtPwVcTDMPerfIntervalEntry 7 }
+
+prvtPwVcTDMPerfIntervalNearEndFC OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of local packet failures."
+::= { prvtPwVcTDMPerfIntervalEntry 8 }
+
+prvtPwVcTDMPerfIntervalFarEndFC OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of remote packet failures."
+::= { prvtPwVcTDMPerfIntervalEntry 9 }
+
+
+-- End TDM PW Performance Interval Table
+
+-- TDM PW Performance Table
+
+prvtPwVcTDMPerfTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtPwVcTDMPerfEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table provides performance information per TDM PW
+similar to the prvtPwVcTDMPerfIntervalTable above. However,
+these counters represent complete historical information. "
+::= { prvtPwVcTDMObjects 7 }
+
+prvtPwVcTDMPerfEntry OBJECT-TYPE
+SYNTAX PrvtPwVcTDMPerfEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry is created in this table by the agent for
+every entry in the prvtPwVcTDM table."
+
+INDEX { prvtPwVcTDMModuleId,prvtPwVcTDMCircuitId }
+
+::= { prvtPwVcTDMPerfTable 1 }
+
+PrvtPwVcTDMPerfEntry ::= SEQUENCE {
+prvtPwVcTDMPerfPktsOoseq Counter32,
+prvtPwVcTDMPerfJtrBfrUnderruns Counter32,
+prvtPwVcTDMPerfJtrBfrOverruns Counter32,
+prvtPwVcTDMPerfMalformedPkt Counter32,
+prvtPwVcTDMPerfNearEndFC Counter32,
+prvtPwVcTDMPerfFarEndFC Counter32,
+prvtPwVcTDMPerfDiscontinuityTime TimeStamp
+}
+
+prvtPwVcTDMPerfPktsOoseq OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected out of sequence (via TDM
+header sequence numbers), but successfully re-ordered.
+Note: some implementations may not support this
+feature."
+::= { prvtPwVcTDMPerfEntry 1 }
+
+prvtPwVcTDMPerfJtrBfrUnderruns OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of times a packet needed to be played
+out and the jitter buffer was empty."
+::= { prvtPwVcTDMPerfEntry 2 }
+
+prvtPwVcTDMPerfJtrBfrOverruns OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected out of range (via TDM
+header sequence numbers), and could not be re-
+ordered, or could not fit in the jitter buffer."
+::= { prvtPwVcTDMPerfEntry 3 }
+
+prvtPwVcTDMPerfMalformedPkt OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of packets detected with unexpected size, or
+bad headers' stack."
+::= { prvtPwVcTDMPerfEntry 4 }
+
+
+prvtPwVcTDMPerfDiscontinuityTime OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+
+DESCRIPTION
+"The value of sysUpTime on the most recent occasion at
+which any one or more of this segment's Counter32
+suffered a discontinuity. If no such
+discontinuities have occurred since the last re-
+initialization of the local management subsystem, then
+this object contains a zero value."
+::= { prvtPwVcTDMPerfEntry 5 }
+
+prvtPwVcTDMPerfNearEndFC OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of local packet failures."
+::= { prvtPwVcTDMPerfEntry 6 }
+
+prvtPwVcTDMPerfFarEndFC OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of remote packet failures."
+::= { prvtPwVcTDMPerfEntry 7 }
+
+-- End of PW TDM Performance table
+
+-- TDM PW Alarm Table
+
+prvtPwVcTDMAlarmTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtPwVcTDMAlarmEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains object for configuring and displaying CES Circuits TCA thresholds."
+::= { prvtPwVcTDMObjects 8 }
+
+prvtPwVcTDMAlarmEntry OBJECT-TYPE
+SYNTAX PrvtPwVcTDMAlarmEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+""
+INDEX { prvtPwVcTDMModuleId, prvtPwVcTDMCircuitId, prvtPwVcTDMAlarmIndex }
+::= { prvtPwVcTDMAlarmTable 1 }
+
+PrvtPwVcTDMAlarmEntry ::= SEQUENCE {
+prvtPwVcTDMAlarmIndex Gauge32,
+prvtPwVcTDMAlarmVariable OBJECT IDENTIFIER,
+prvtPwVcTDMAlarmThreshold INTEGER,
+prvtPwVcTDMAlarmValue INTEGER
+}
+
+prvtPwVcTDMAlarmIndex OBJECT-TYPE
+SYNTAX Gauge32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+" An integer uniquely identifying an alarm entry." 
+::= { prvtPwVcTDMAlarmEntry 1 } 
+
+prvtPwVcTDMAlarmVariable OBJECT-TYPE
+SYNTAX OBJECT IDENTIFIER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The OID of the variable whose value is being monitored. Depending on the time interval, 
+the error condition and the modue and circuit ID, this points to an object from an entry in 
+prvtPwVcTDMPerfCurrentTable or prvtPwVcTDMPerfTable." 
+::= { prvtPwVcTDMAlarmEntry 2 } 
+
+prvtPwVcTDMAlarmThreshold OBJECT-TYPE
+SYNTAX INTEGER 
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The alarm condition threshold for this alarm entry. The alarm is triggered if the value of the
+object pointed by prvtPwVcTDMAlarmVariable remains above this threshold for more than 3 seconds." 
+::= { prvtPwVcTDMAlarmEntry 3 } 
+
+prvtPwVcTDMAlarmValue OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"The value of the object pointed to by prvtPwVcTDMAlarmVariable, present for notification purposes." 
+::= { prvtPwVcTDMAlarmEntry 4 } 
+
+prvtPwVcTDMAlarm NOTIFICATION-TYPE
+OBJECTS { prvtPwVcTDMAlarmVariable, prvtPwVcTDMAlarmThreshold, prvtPwVcTDMAlarmValue }
+STATUS current
+DESCRIPTION
+"This notification is sent when the value of a TDM port error condition statistic has exceeded the 
+configured threshold, or the value has dropped back below the threshold."
+::= {prvtPwVcTDMTraps 1}
+
+prvtPwVcTDMStatusChange NOTIFICATION-TYPE
+OBJECTS { prvtPwVcTDMOperStatus, prvtPwVcTDMCfgAdminStatus }
+STATUS current
+DESCRIPTION
+"This notification is sent when the operational or administrative status of circuit changes."
+::= {prvtPwVcTDMTraps 2}
+
+-- End of PW TDM Performance table
+
+-- Conformance Information
+
+prvtPwVcTDMGroups OBJECT IDENTIFIER ::= { prvtPwVcTDMConformance 1 }
+prvtPwVcTDMCompliances OBJECT IDENTIFIER ::= { prvtPwVcTDMConformance 2 }
+
+prvtPwTDMModuleCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for agent that support PW
+over TDM PSN operation."
+
+MODULE -- this module
+MANDATORY-GROUPS { prvtPwVcTDMGroup,
+prvtPwVcTDMPerfCurrentGroup,
+prvtPwVcTDMPerfIntervalGroup,
+prvtPwVcTDMPerfGroup,
+prvtPwVcTDMNotificationsGroup
+}
+
+OBJECT prvtPwVcTDMCfgPktReorder
+MIN-ACCESS read-only
+DESCRIPTION
+"The ability to set the packet reordering
+is not required."
+
+OBJECT prvtPwVcTDMCfgRtpHdrUsed
+MIN-ACCESS read-only
+DESCRIPTION
+"The ability to set the whether to use the
+RTP header or not is not required."
+
+
+::= { prvtPwVcTDMCompliances 1 }
+
+-- Units of conformance.
+
+prvtPwVcTDMGroup OBJECT-GROUP
+OBJECTS {
+prvtPwVcTDMType,
+prvtPwVcRelTDMCfgIndex,
+prvtPwVcTDMTimeElapsed,
+prvtPwVcTDMValidIntervals,
+prvtPwVcTDMCurrentIndications,
+prvtPwVcTDMLatchedIndications,
+prvtPwVcTDMLastEsTimeStamp,
+prvtPwVcTDMCfgPayloadSize,
+prvtPwVcTDMCfgPktReorder,
+prvtPwVcTDMCfgRtpHdrUsed,
+prvtPwVcTDMCfgJtrBfrDepth
+}
+STATUS current
+DESCRIPTION
+"Collection of objects for basic TDM PW config and
+status."
+::= { prvtPwVcTDMGroups 1 }
+
+
+prvtPwVcTDMPerfCurrentGroup OBJECT-GROUP
+OBJECTS {
+prvtPwVcTDMPerfCurrentPktsOoseq,
+prvtPwVcTDMPerfCurrentJtrBfrUnderruns,
+prvtPwVcTDMPerfCurrentJtrBfrOverruns,
+prvtPwVcTDMPerfCurrentMalformedPkt,
+prvtPwVcTDMPerfNearEndFC,
+prvtPwVcTDMPerfFarEndFC
+}
+STATUS current
+DESCRIPTION
+"Collection of current statistics objects for TDM PWs."
+::= { prvtPwVcTDMGroups 2 }
+
+prvtPwVcTDMPerfIntervalGroup OBJECT-GROUP
+OBJECTS {
+prvtPwVcTDMPerfIntervalPktsOoseq,
+prvtPwVcTDMPerfIntervalJtrBfrUnderruns,
+prvtPwVcTDMPerfIntervalJtrBfrOverruns,
+prvtPwVcTDMPerfIntervalMalformedPkt,
+prvtPwVcTDMPerfNearEndFC,
+prvtPwVcTDMPerfFarEndFC,
+prvtPwVcTDMPerfIntervalValidData,
+prvtPwVcTDMPerfIntervalDuration
+
+}
+STATUS current
+DESCRIPTION
+"Collection of Interval statistics objects for TDM PWs."
+::= { prvtPwVcTDMGroups 3 }
+
+prvtPwVcTDMPerfGroup OBJECT-GROUP
+OBJECTS {
+prvtPwVcTDMPerfPktsOoseq,
+prvtPwVcTDMPerfJtrBfrUnderruns,
+prvtPwVcTDMPerfJtrBfrOverruns,
+prvtPwVcTDMPerfMalformedPkt,
+prvtPwVcTDMPerfNearEndFC,
+prvtPwVcTDMPerfFarEndFC,
+prvtPwVcTDMPerfDiscontinuityTime
+}
+STATUS current
+DESCRIPTION
+"Collection of running statistics objects for TDM PWs."
+::= { prvtPwVcTDMGroups 4 }
+
+prvtPwVcTDMNotificationsGroup NOTIFICATION-GROUP
+NOTIFICATIONS { prvtPwVcTDMAlarm, prvtPwVcTDMStatusChange } 
+STATUS current
+DESCRIPTION
+"The group of supported notifications."
+::= { prvtPwVcTDMGroups 5 }
+
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-QOS-MIB b/MIBS/telco-systems/binos/PRVT-QOS-MIB
new file mode 100644
index 0000000..6c9f678
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-QOS-MIB
@@ -0,0 +1,4006 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-QOS-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+
+PRVT-QOS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE,
+        NOTIFICATION-TYPE, Gauge32,
+        Integer32, Unsigned32, IpAddress,
+        TimeTicks, Counter64, Counter32             FROM SNMPv2-SMI
+
+        MODULE-COMPLIANCE, OBJECT-GROUP,
+        NOTIFICATION-GROUP                          FROM SNMPv2-CONF
+
+        TEXTUAL-CONVENTION, DisplayString,
+        RowStatus, MacAddress, TimeStamp,
+        TruthValue, RowPointer, StorageType         FROM SNMPv2-TC
+
+        InterfaceIndex, InterfaceIndexOrZero        FROM IF-MIB
+        prvt-products								FROM PRVT-SWITCH-MIB;
+
+       
+      
+
+prvtQosMIB   MODULE-IDENTITY
+        LAST-UPDATED    "201003230000Z"
+        ORGANIZATION    "BATM Advanced Communication"
+        CONTACT-INFO
+            " BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+        DESCRIPTION
+            "This  document is the SNMP MIB module to manage the QoS parameters."
+
+--                                           
+--  Revision History
+--
+	REVISION        "201003230000Z"
+        DESCRIPTION     "Added support for QOS over VLAN."	
+        REVISION        "200904240000Z"
+        DESCRIPTION     "Changed hqosVirtualSchedulerParent to type TNamedItemOrEmpty.
+                         Added some TCs.  Miscellaneous additional clean up."
+        REVISION        "200810010000Z"
+     	DESCRIPTION     "Miscellaneous clean up."
+        REVISION        "200711170000Z"   
+        DESCRIPTION     "Initial version."
+
+        
+         ::= { serviceAccessSwitch 1 }
+         
+          serviceAccessSwitch  OBJECT IDENTIFIER ::= { prvt-products 7 }
+--
+-- Textual conventions
+--  
+  TNamedItem ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The name of an item.
+
+        Note, use only NVT ASCII displayable characters
+        here, no control characters, no UTF-8, etc."
+    SYNTAX OCTET STRING (SIZE (1..6))
+
+TNamedItemOrEmpty ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The name of an item, or an empty string.  When used in a reference
+        (TNamedItemOrEmpty) the item name entry must exist in the table.
+
+        Note, use only NVT ASCII displayable characters
+        here, no control characters, no UTF-8, etc."
+    SYNTAX OCTET STRING (SIZE (0 | 1..6))
+ 
+TQEncapVal ::= TEXTUAL-CONVENTION
+    STATUS  current
+    DESCRIPTION
+       "A valid Vlan ID in the range 1-4093, or 65535."
+    SYNTAX  Unsigned32
+
+TLspExpValue ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+	"MPLS Experimental bits. -1 means not set."
+    REFERENCE ""
+    SYNTAX      INTEGER (-1 | 0..7)
+
+Dot1PPriority ::= TEXTUAL-CONVENTION
+    STATUS          current
+    DESCRIPTION
+	"IEEE 802.1p priority.  zero is lowest, seven is highest.
+	-1 means not set"
+    REFERENCE ""
+    SYNTAX      INTEGER (-1 | 0..7)
+
+ TFCName ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The name of a Forwarding Class entry."
+    SYNTAX OCTET STRING (SIZE (1..6))
+
+TFCNameOrEmpty ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The name of a Forwarding Class entry."
+    SYNTAX INTEGER { be(1), l2(2), af(3), l1(4), h2(5), ef(6), h1(7), nc(8) }
+
+TDSCPValue ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The value of a Differential Services Code Point."
+    SYNTAX INTEGER (0..63)
+
+TItemDescription ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "Description for an item.  Note, use only NVT ASCII displayable characters
+        here, no control characters, no UTF-8, etc."
+    SYNTAX OCTET STRING (SIZE(0..30))
+
+   
+TQueueId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a queue. zero means not set.
+         legal values when used for an index are [1..32]."
+    SYNTAX INTEGER (0 | 1..32)
+
+TIngressQueueId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a queue. zero means not set. legal
+         values when used for an index are [1..32]."
+    SYNTAX INTEGER (0 | 1..32)
+
+TEgressQueueId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of an egress queue. zero means not set.
+         legal values when used for an index are [1..32]."
+    SYNTAX INTEGER (0 | 1..32)
+
+TSapIngressPolicyId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a SAP ingress policy."
+    SYNTAX Unsigned32 (1..64)
+
+TSapIngressPolicyIdOrNone ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a SAP ingress policy.
+         A value of 0 indicates no policy."
+    SYNTAX Unsigned32 (0..64)
+
+TSapEgressPolicyId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a SAP egress policy."
+    SYNTAX Unsigned32 (1..64)
+
+TSapEgressPolicyIdOrNone::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification number of a SAP egress policy.
+         A value of 0 indicates no policy."
+    SYNTAX Unsigned32 (0..64)
+
+TNetworkPolicyId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification string of a network policy."
+    SYNTAX OCTET STRING (SIZE(1..6))
+    
+TNetworkPolicyIdOrNone ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The identification string of a network policy."
+    SYNTAX          OCTET STRING (SIZE(0..6))
+    
+TItemMatch  ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "When set to off, the item is not matched.
+         When set to false, packets without the item match the filter.
+         When set to true, packets with the item match the filter.
+        "
+    SYNTAX INTEGER { off(1), false(2), true(3) }
+
+TPriority ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The priority to apply to a packet"
+    SYNTAX INTEGER { low(1), high(2) }
+
+TPriorityOrDefault ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The priority to apply to a packet.
+         When set to default(3), the priority from the default-action is used."
+    SYNTAX INTEGER { low(1), high(2), default(3) }
+
+TProfile ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The profile marking of a packet at the ingress."
+    SYNTAX INTEGER { in(1), out(2) }
+
+
+TCIRRate ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The rate to be used in kbps."
+    SYNTAX      INTEGER (0..100000000)
+
+TPIRRate ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The rate to be used in kbps."
+    SYNTAX      INTEGER (1..100000000)
+
+TRateValue ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The percentage of maximum rate allowed."
+    SYNTAX      INTEGER 
+
+TLevel ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The level of the specified entity while feeding into the parent."
+    SYNTAX      INTEGER (1..8)
+
+TWeight ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The weight of the specified entity while feeding into the parent."
+    SYNTAX      INTEGER (0..100)
+
+TTreshold ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+        "The treshold to be used in %.Valid values are 25,50,75,100%."
+    SYNTAX      INTEGER (25..100)
+    
+TConformanceLevel ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The conformance level green or yellow."
+    SYNTAX  INTEGER { green(1), yellow(2) }
+
+
+TShaperId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The ID of a Shaper Profile."
+    SYNTAX  INTEGER
+
+TTailDropId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The ID of a TailDrop Profile."
+    SYNTAX  INTEGER
+    
+TSredId ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The ID of a SRED Profile."
+    SYNTAX  INTEGER
+     
+TSSchedulingProfile ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The ID of a Scheduling Profile."
+    SYNTAX  INTEGER 
+    
+TSlopePolicy ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "The ID of a Wred Profile."
+ SYNTAX INTEGER (1..64)
+ 
+
+--
+-- mib objects
+-- 
+
+tFCObjects              	OBJECT IDENTIFIER ::= { prvtQosMIB 1 }
+hqosSapIngressObjects		OBJECT IDENTIFIER ::= { prvtQosMIB 2 }
+hqosSapEgressObjects		OBJECT IDENTIFIER ::= { prvtQosMIB 3 }
+hqosNetworkObjects			OBJECT IDENTIFIER ::= { prvtQosMIB 4 }
+hqosNetworkQueueObjects    	OBJECT IDENTIFIER ::= { prvtQosMIB 5 }
+hqosSchedulerObjects       	OBJECT IDENTIFIER ::= { prvtQosMIB 6 }
+tWredObjects           		OBJECT IDENTIFIER ::= { prvtQosMIB 7 }
+tCongestionAvoidanceProfileObjects	OBJECT IDENTIFIER ::= { prvtQosMIB 8 }
+tShaperObjects          	OBJECT IDENTIFIER ::= { prvtQosMIB 9 }         
+tWfqObjects		        	OBJECT IDENTIFIER ::= { prvtQosMIB 10 }
+qosSchedulingProfileObjects	OBJECT IDENTIFIER ::= { prvtQosMIB 11 }
+qosServicePolicyObjects				OBJECT IDENTIFIER ::= { prvtQosMIB 12 }
+qosNetworkPolicyObjects				OBJECT IDENTIFIER ::= { prvtQosMIB 13 }
+qosGlobalObjects					OBJECT IDENTIFIER ::= { prvtQosMIB 14 }
+qosServiceObjects					OBJECT IDENTIFIER ::= { prvtQosMIB 15 }
+qosInterfaceObjects					OBJECT IDENTIFIER ::= { prvtQosMIB 16 }
+qosStatisticsObjects				OBJECT IDENTIFIER ::= { prvtQosMIB 17 }
+qosVlanPolicyObjects			OBJECT IDENTIFIER ::= { prvtQosMIB 18 }
+qosVlanObjects				OBJECT IDENTIFIER ::= { prvtQosMIB 19 }
+
+--
+-- Forwarding Class name table
+--
+
+tFCNameTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TFCNameEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "A list of all Forwarding Class Names.  Forwarding Class Name entries
+        must exist here and be active before they can be referenced
+        elsewhere (e.g. qos queue)."
+    ::= { tFCObjects 1 }
+
+tFCNameEntry OBJECT-TYPE
+    SYNTAX       TFCNameEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular Forwarding Class Name, particularly
+         the Forwarding Class value.
+
+         Some default entries are created by the agent.
+         Default entries have tFCNameStorageType permanent,
+         and can not be deleted.
+
+         Entries cannot be created by user but maybe supported in future.
+
+         An attempt to create a row in this table would return no creation."
+    INDEX { tFCValue }
+    ::= { tFCNameTable 1 }
+
+TFCNameEntry ::= SEQUENCE
+    {
+    	tFCValue              INTEGER,
+        tFCRowStatus          RowStatus,
+        tFCStorageType        StorageType,
+        tFCName               TFCName,
+        tFCNameLastChanged    TimeStamp
+    }
+
+tFCValue  OBJECT-TYPE
+    SYNTAX       INTEGER (1..8)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Forwarding class number as used in the tables below."
+    REFERENCE ""
+    ::= { tFCNameEntry 1 }
+
+tFCRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Row Status of the entry."
+    ::= { tFCNameEntry 2 }
+
+tFCStorageType  OBJECT-TYPE
+    SYNTAX       StorageType
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "The storage type of this row in the table."
+    DEFVAL { nonVolatile }
+    ::= { tFCNameEntry 3 }
+
+tFCName  OBJECT-TYPE
+    SYNTAX       TFCName
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "FC name."
+    REFERENCE ""
+    ::= { tFCNameEntry 4 }
+
+tFCNameLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Timestamp of last change to this row in tFCNameTable."
+    ::= { tFCNameEntry 5 }
+ 
+ --
+-- sap-ingress policy table
+--
+
+hqosSapIngressTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSapIngressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "This table specifies HQoS service ingress  policy configuration."
+    ::= { hqosSapIngressObjects 1 }
+
+hqosSapIngressEntry OBJECT-TYPE
+    SYNTAX       HqosSapIngressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular HQoS Sap Ingress Policy.
+
+         sap-ingress policy (1) is the default entry.
+
+         Default Entry is created by the agent, other entries are
+         created by user.
+
+         Default Entry cannot be modified/deleted. The other
+         entries are deleted by user.
+
+         There is no StorageType object, entries have a presumed
+         StorageType of nonVolatile.
+        "
+    INDEX { hqosSapIngressIndex }
+    ::= { hqosSapIngressTable 1 }
+
+HqosSapIngressEntry ::= SEQUENCE
+    {
+        hqosSapIngressIndex                 TSapIngressPolicyId,
+        hqosSapIngressRowStatus             RowStatus,
+        hqosSapIngressDescription           TItemDescription,
+        hqosSapIngressDefaultDscpFC         INTEGER,
+        hqosSapIngressDefaultVptFC			INTEGER,
+        hqosSapIngressLastChanged           TimeStamp
+    }
+
+hqosSapIngressIndex  OBJECT-TYPE
+    SYNTAX       TSapIngressPolicyId
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The identifier of a HQoS service ingress policy.
+        The policy ID is the index to this table."
+    ::= { hqosSapIngressEntry 1 }
+
+hqosSapIngressRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status for the policy. The deletion of this row has
+         an action of removing the dependent rows in the following
+         tables :
+           - hqosSapIngressQueueTable
+           - hqosSapIngressDSCPTable
+           - hqosSapIngressDot1pTable
+        "
+    ::= { hqosSapIngressEntry 2 }
+
+
+hqosSapIngressDescription  OBJECT-TYPE
+    SYNTAX       TItemDescription
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "User-provided description of the policy."
+    DEFVAL { ''H }
+    ::= { hqosSapIngressEntry 3 }
+
+hqosSapIngressDefaultDscpFC  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "All traffic that does not match the specified dot1p, DSCP,
+         is classified as the default action forwarding class.
+
+         The default forwarding class is best-effort."
+    DEFVAL { 4 }
+    ::= { hqosSapIngressEntry 4 }
+
+hqosSapIngressDefaultVptFC  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The priority to assign to traffic ingressing as the default
+         action queue."
+    DEFVAL { 0 }
+    ::= { hqosSapIngressEntry 5 }
+
+
+hqosSapIngressLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in tSapIngressTable."
+    ::= { hqosSapIngressEntry 6 }
+
+--
+-- sap-ingress policy queue table
+--
+
+hqosSapIngressQueueTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSapIngressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about all HQoS service ingress policies' queues."
+    ::= { hqosSapIngressObjects 2 }
+
+hqosSapIngressQueueEntry OBJECT-TYPE
+    SYNTAX       HqosSapIngressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular queue for a service ingress policy.
+
+         Some default queues are created by the system, they cannot be removed.
+
+         Other entries are created by user."
+    INDEX { hqosSapIngressIndex, hqosSapIngressQueue, hqosSapIngressQueueParent }
+    ::= { hqosSapIngressQueueTable 1 }
+
+HqosSapIngressQueueEntry ::= SEQUENCE
+    {
+        hqosSapIngressQueue                 TIngressQueueId,
+        hqosSapIngressQueueParent           TNamedItemOrEmpty,
+        hqosSapIngressQueueRowStatus        RowStatus,
+        hqosSapIngressQueueLevel            TLevel,
+        hqosSapIngressQueueServWfq          INTEGER,
+        hqosSapIngressQueueType             INTEGER,
+        hqosSapIngressQueueHiPriority       TruthValue,
+		hqosSapIngressQueueWred	            TSlopePolicy,
+        hqosSapIngressQueueLastChanged      TimeStamp
+    }
+
+hqosSapIngressQueue  OBJECT-TYPE
+    SYNTAX       TIngressQueueId (1..32)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The queue ID is used as the secondary index to the table entry."
+    ::= { hqosSapIngressQueueEntry 1 }
+
+hqosSapIngressQueueParent  OBJECT-TYPE
+    SYNTAX       TNamedItemOrEmpty
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The scheduler to which this queue would be feeding to."
+    ::= { hqosSapIngressQueueEntry 2 }
+
+hqosSapIngressQueueRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { hqosSapIngressQueueEntry 3 }
+    
+hqosSapIngressQueueLevel  OBJECT-TYPE
+    SYNTAX       TLevel
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This specifies the level of priority while feeding to the parent."
+    DEFVAL { 1 }
+    ::= { hqosSapIngressQueueEntry 4 }
+
+hqosSapIngressQueueServWfq  OBJECT-TYPE
+    SYNTAX       INTEGER (1..61)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The WFQ profile that needs to be used by the scheduler to which this queue
+         would be feeding to."
+    DEFVAL { 1 }
+    ::= { hqosSapIngressQueueEntry 5 }
+
+
+hqosSapIngressQueueType  OBJECT-TYPE
+    SYNTAX       INTEGER {     
+    				unknown(0),
+                    unicast(1),
+                    multicast(2),
+                    broadcast(3)
+                 }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This object specifies the traffic type of the queue."
+       ::= { hqosSapIngressQueueEntry 6 }
+
+
+hqosSapIngressQueueHiPriority  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Is this a high-priority queue."
+    DEFVAL { false }
+    ::= { hqosSapIngressQueueEntry 7 }
+
+hqosSapIngressQueueWred  OBJECT-TYPE
+    SYNTAX       TSlopePolicy (1..32)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "WRED profile applied to this queue."
+       ::= { hqosSapIngressQueueEntry 8 }
+    
+hqosSapIngressQueueLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosSapIngressQueueTable."
+    ::= { hqosSapIngressQueueEntry 9 }
+
+--
+-- service ingress policy DSCP mappings table
+--
+ 
+hqosSapIngressDSCPTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSapIngressDSCPEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "A list of all DSCP entries for service ingress policies."
+    ::= { hqosSapIngressObjects 3 }
+
+hqosSapIngressDSCPEntry OBJECT-TYPE
+    SYNTAX       HqosSapIngressDSCPEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular DSCP entry for a service ingress policy.
+
+        Entries are created by user.
+        Entries are deleted by user.
+
+        There is no StorageType object, entries have a presumed
+        StorageType of nonVolatile.
+
+        In the event that one policy has multiple entries, and
+        the hqosSapIngressDSCP values are the same, only one queue
+        will be created (the queue for the lexicographically
+        first hqosSapIngressDSCP).
+        "
+    INDEX { hqosSapIngressIndex, hqosSapIngressDSCP }
+    ::= { hqosSapIngressDSCPTable 1 }
+
+HqosSapIngressDSCPEntry ::= SEQUENCE
+    {
+        hqosSapIngressDSCP            TDSCPValue,
+        hqosSapIngressDSCPRowStatus   RowStatus,
+        hqosSapIngressDSCPFC          TFCNameOrEmpty,
+        hqosSapIngressDSCPConformance TConformanceLevel,
+        hqosSapIngressDSCPLastChanged TimeStamp
+    }
+
+hqosSapIngressDSCP  OBJECT-TYPE
+    SYNTAX       TDSCPValue
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Differentiated Services Code Point (DSCP) value
+		as to match in the packet. This value is also used 
+		index so that for any DSCP value there
+        is only one possible disposition queue and priority."
+    ::= { hqosSapIngressDSCPEntry 1 }
+
+hqosSapIngressDSCPRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "This object allows creation/deletion of rows in this table."
+    ::= { hqosSapIngressDSCPEntry 2 }
+
+hqosSapIngressDSCPFC  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The forwarding class into which the matching traffic should
+         be classified."
+    ::= { hqosSapIngressDSCPEntry 3 }
+
+
+hqosSapIngressDSCPConformance  OBJECT-TYPE
+    SYNTAX       TConformanceLevel
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Previous conformance level: green or yellow."
+    ::= { hqosSapIngressDSCPEntry 4 } 
+ 
+ hqosSapIngressDSCPLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosSapIngressDSCPTable."
+    ::= { hqosSapIngressDSCPEntry 5 }
+--
+-- service ingress policy dot1p mapping table
+--
+
+hqosSapIngressDot1pTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSapIngressDot1pEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "A list of all dot1p entries for service ingress policies."
+    ::= { hqosSapIngressObjects 4 }
+
+hqosSapIngressDot1pEntry OBJECT-TYPE
+    SYNTAX       HqosSapIngressDot1pEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular dot1p match for a service ingress policy.
+         Entries are created by user.
+         Entries are deleted by user.
+        "
+    INDEX { hqosSapIngressIndex, hqosSapIngressDot1pValue }
+    ::= { hqosSapIngressDot1pTable 1 }
+
+HqosSapIngressDot1pEntry ::= SEQUENCE
+    {
+        hqosSapIngressDot1pValue       Dot1PPriority,
+        hqosSapIngressDot1pRowStatus   RowStatus,
+        hqosSapIngressDot1pFC          TFCNameOrEmpty,
+        hqosSapIngressDot1pConformance TConformanceLevel,
+        hqosSapIngressDot1pLastChanged TimeStamp
+    }
+
+hqosSapIngressDot1pValue  OBJECT-TYPE
+    SYNTAX       Dot1PPriority
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Dot1p value to match in the packet. This value is
+        also used as an index so that for any dot1p value there
+        is only one possible disposition queue and priority.
+        "
+    ::= { hqosSapIngressDot1pEntry 1 }
+
+hqosSapIngressDot1pRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status for this service ingress policy's dot1p entry."
+    ::= { hqosSapIngressDot1pEntry 2 }
+
+hqosSapIngressDot1pFC  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current                   
+    DESCRIPTION
+        "The forwarding class into which the matching traffic
+         should be classified."
+    ::= { hqosSapIngressDot1pEntry 3 }
+
+hqosSapIngressDot1pConformance  OBJECT-TYPE
+    SYNTAX       TConformanceLevel
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Previous conformance level: green or yellow"
+    ::= { hqosSapIngressDot1pEntry 4 }
+
+hqosSapIngressDot1pLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosSapIngressDot1pTable."
+    ::= { hqosSapIngressDot1pEntry 5 }
+
+--
+-- service ingress policy fc table
+--
+
+hqosSapIngressFCTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSapIngressFCEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  
+        "This table maintains the mapping of a particular 
+         forwarding class traffic into the specified queue."
+    ::= { hqosSapIngressObjects 5 }
+
+hqosSapIngressFCEntry OBJECT-TYPE
+    SYNTAX       HqosSapIngressFCEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular service ingress policy's
+         forwarding class mappings to queues.
+
+         Entries are created and deleted by user."
+    INDEX { hqosSapIngressIndex, hqosSapIngressFCNumber, hqosSapIngressFCQueueType }
+    ::= { hqosSapIngressFCTable 1 }
+
+HqosSapIngressFCEntry ::= SEQUENCE
+    {
+        hqosSapIngressFCNumber         		TFCNameOrEmpty,
+        hqosSapIngressFCQueueType			INTEGER,
+        hqosSapIngressFCRowStatus      		RowStatus,
+        hqosSapIngressFCQueue          		TIngressQueueId, 
+        hqosSapIngressFCQueueParent			TNamedItemOrEmpty,
+        hqosSapIngressFCLastChanged    		TimeStamp
+    }
+
+hqosSapIngressFCNumber  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Forwarding class number."
+    ::= { hqosSapIngressFCEntry 1 }  
+    
+hqosSapIngressFCQueueType  OBJECT-TYPE
+    SYNTAX       INTEGER {
+                 unknown(0),
+                 unicast(1),
+                 multicast(2),
+                 broadcast(3)
+    }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The type of the queue to be assigned to the FC."
+    ::= { hqosSapIngressFCEntry 2 }
+
+hqosSapIngressFCRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status for this queue."
+    ::= { hqosSapIngressFCEntry 3 }
+
+hqosSapIngressFCQueue OBJECT-TYPE
+    SYNTAX       TIngressQueueId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The specific queue to be used for packets in this forwarding class."
+    ::= { hqosSapIngressFCEntry 4 }    
+    
+hqosSapIngressFCQueueParent OBJECT-TYPE
+    SYNTAX       TNamedItemOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The parent of the specific queue for this FC"
+    ::= { hqosSapIngressFCEntry 5 }
+
+hqosSapIngressFCLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosSapIngressFCTable."
+    ::= { hqosSapIngressFCEntry 6 }
+
+
+--
+-- service egress policy table
+--
+
+hqosSapEgressTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSapEgressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about all service egress policies."
+    ::= { hqosSapEgressObjects 1 }
+
+hqosSapEgressEntry OBJECT-TYPE
+    SYNTAX       HqosSapEgressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular service egress policy.
+         Entries are created by user.
+         Entries are deleted by user.
+         The default service egress policy (1) cannot be changed or
+         destroyed.
+        "
+    INDEX { hqosSapEgressIndex }
+    ::= { hqosSapEgressTable 1 }
+
+HqosSapEgressEntry ::= SEQUENCE
+    {
+        hqosSapEgressIndex              TSapEgressPolicyId,
+        hqosSapEgressRowStatus          RowStatus,
+        hqosSapEgressDescription        TItemDescription,
+        hqosSapEgressLastChanged        TimeStamp
+    }
+
+hqosSapEgressIndex  OBJECT-TYPE
+    SYNTAX       TSapEgressPolicyId
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The service egress policy ID is used as index for the table."
+    ::= { hqosSapEgressEntry 1 }
+
+hqosSapEgressRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of this policy's entry."
+    ::= { hqosSapEgressEntry 2 }
+
+hqosSapEgressDescription  OBJECT-TYPE
+    SYNTAX       TItemDescription
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "User-supplied description of this service egress policy."
+    DEFVAL { ''H }
+    ::= { hqosSapEgressEntry 5 }
+
+hqosSapEgressLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosSapEgressTable."
+    ::= { hqosSapEgressEntry 6 }
+
+
+--
+-- service egress policy queue table
+--
+
+hqosSapEgressQueueTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSapEgressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Information about service egress policies' queues."
+    ::= { hqosSapEgressObjects 2 }
+
+hqosSapEgressQueueEntry OBJECT-TYPE
+    SYNTAX       HqosSapEgressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular service egress queue.
+        Entries are created by user.
+        Entries are deleted by user."
+    INDEX { hqosSapEgressIndex, hqosSapEgressQueueIndex, hqosSapEgressQueueParent }
+    ::= { hqosSapEgressQueueTable 1 }
+
+HqosSapEgressQueueEntry ::= SEQUENCE
+    {
+        hqosSapEgressQueueIndex             TEgressQueueId,
+        hqosSapEgressQueueParent            TNamedItemOrEmpty,
+        hqosSapEgressQueueRowStatus         RowStatus,
+        hqosSapEgressQueueLevel             TLevel,
+        hqosSapEgressQueueServWfq           INTEGER, 
+        hqosSapEgressQueueType				INTEGER,	
+        hqosSapEgressQueueHiPriority        TruthValue,
+		hqosSapEgressQueueWred				TSlopePolicy,
+        hqosSapEgressQueueLastChanged			TimeStamp
+    }
+
+hqosSapEgressQueueIndex  OBJECT-TYPE
+    SYNTAX       TEgressQueueId
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The number of a queue.Zero is not allowed."
+    ::= { hqosSapEgressQueueEntry 1 }
+
+hqosSapEgressQueueParent  OBJECT-TYPE
+    SYNTAX       TNamedItemOrEmpty
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The scheduler to which this queue would be feeding to."
+    ::= { hqosSapEgressQueueEntry 2 }
+    
+  hqosSapEgressQueueRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+		"Row Status of the entry."
+    ::= { hqosSapEgressQueueEntry 3 }
+
+hqosSapEgressQueueLevel  OBJECT-TYPE
+    SYNTAX       TLevel
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This specifies the level of priority while feeding to the parent."
+    DEFVAL { 1 }
+    ::= { hqosSapEgressQueueEntry 4 }
+
+hqosSapEgressQueueServWfq  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The WFQ profile that needs to be used by the scheduler to which this queue
+         would be feeding to."
+    DEFVAL { 1 }
+    ::= { hqosSapEgressQueueEntry 5 }
+
+ hqosSapEgressQueueType  OBJECT-TYPE
+    SYNTAX       INTEGER {     
+    				unknown(0),
+                    unicast(1),
+                    multicast(2),
+                    broadcast(3)
+                 }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This object specifies the traffic type of the queue."
+       ::= { hqosSapEgressQueueEntry 6 }
+
+hqosSapEgressQueueHiPriority  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Is this a high-priority queue?"
+    DEFVAL { false }
+    ::= { hqosSapEgressQueueEntry 7 }
+
+hqosSapEgressQueueWred  OBJECT-TYPE
+    SYNTAX       TSlopePolicy
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "ID of WRED profile applied to this queue."
+    ::= { hqosSapEgressQueueEntry 8 }
+    
+hqosSapEgressQueueLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosSapEgressQueueTable."
+    ::= { hqosSapEgressQueueEntry 9 }
+    
+--
+-- service egress policy fc table
+--
+
+hqosSapEgressFCTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSapEgressFCEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  
+    	"Information about a particular service egress policy's
+         forwarding class mappings to queues.
+
+         Entries are created and deleted by user."
+    ::= { hqosSapEgressObjects 3 }
+
+hqosSapEgressFCEntry OBJECT-TYPE
+    SYNTAX       HqosSapEgressFCEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular service egress policy's
+        forwarding class mappings to queues and dot1p values.
+        Entries are created by user.
+        Entries are deleted by user."
+    INDEX { hqosSapEgressIndex, hqosSapEgressFCNumber, hqosSapEgressFCEntryType }
+    ::= { hqosSapEgressFCTable 1 }
+
+HqosSapEgressFCEntry ::= SEQUENCE
+    {
+        hqosSapEgressFCNumber				TFCNameOrEmpty,
+        hqosSapEgressFCEntryType			INTEGER,
+        hqosSapEgressFCRowStatus			RowStatus,
+        hqosSapEgressFCQueue				TEgressQueueId,  
+        hqosSapEgressFCQueueParent			TNamedItemOrEmpty,
+        hqosSapEgressFCDot1PValue			Dot1PPriority,  
+        hqosSapEgressFCDSCPValue			TDSCPValue,
+        hqosSapEgressFCLastChanged			TimeStamp
+    }
+
+hqosSapEgressFCNumber  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Forwarding class number."
+    ::= { hqosSapEgressFCEntry 1 }
+
+hqosSapEgressFCEntryType  OBJECT-TYPE
+    SYNTAX		INTEGER {
+     			unknown(0),
+                unicast(1),
+                multicast(2),
+                broadcast(3),
+                dscp(4),
+                dot1p(5)
+    }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The type of the configuration entry for this FC."
+    ::= { hqosSapEgressFCEntry 2 }
+
+hqosSapEgressFCRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status for this queue."
+    ::= { hqosSapEgressFCEntry 3 }
+
+hqosSapEgressFCQueue OBJECT-TYPE
+    SYNTAX       TEgressQueueId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The queue to use for packets with this forwarding class.
+		A valid queue-id must be specified before setting the row status
+		to active."
+    ::= { hqosSapEgressFCEntry 4 }             
+ 
+    
+hqosSapEgressFCQueueParent OBJECT-TYPE
+    SYNTAX       TNamedItemOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The name of the parent scheduler for the specific queue."
+    ::= { hqosSapEgressFCEntry 5 }
+
+hqosSapEgressFCDot1PValue OBJECT-TYPE
+    SYNTAX       Dot1PPriority
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The 802.1p value to use for packet remarking.Currently not supported."
+    DEFVAL { -1 }
+    ::= { hqosSapEgressFCEntry 6 }
+    
+hqosSapEgressFCDSCPValue OBJECT-TYPE
+    SYNTAX       TDSCPValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The DSCP value to use for packets remarking. Currently not supported."
+    ::= { hqosSapEgressFCEntry 7 }
+
+
+hqosSapEgressFCLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosSapEgressFCTable."
+    ::= { hqosSapEgressFCEntry 8 }
+  
+--
+-- network policy table
+--
+
+hqosNetworkPolicyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosNetworkPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "HQOS network policy table. Keeps comman information of the network policy "
+    ::= { hqosNetworkObjects 1 }
+
+hqosNetworkPolicyEntry OBJECT-TYPE
+    SYNTAX       HqosNetworkPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular Network Policy.
+
+         Network policy DefPol(1) is the default entry.
+
+         Default Entry is created by the agent, other entries are
+         created by user.
+
+         Default Entry cannot be modified/deleted. The other
+         entries are deleted by user.
+
+         There is no StorageType object, entries have a presumed
+         StorageType of nonVolatile.
+
+         The default Egress FC entries are created as an action
+         of setting the rowstatus.
+        "
+    INDEX { hqosNetworkPolicyIndex }
+    ::= { hqosNetworkPolicyTable 1 }
+
+HqosNetworkPolicyEntry ::= SEQUENCE
+    {
+        hqosNetworkPolicyIndex						TNetworkPolicyId,
+        hqosNetworkPolicyRowStatus					RowStatus,
+        hqosNetworkPolicyDescription				TItemDescription,
+        hqosNetworkPolicyIngressDefaultActionFC		TFCNameOrEmpty,
+        hqosNetworkPolicyIngressConformance			TConformanceLevel,
+        hqosNetworkPolicyEgressRemark				TruthValue,
+        hqosNetworkPolicyLastChanged					TimeStamp
+    }
+
+hqosNetworkPolicyIndex  OBJECT-TYPE
+    SYNTAX       TNetworkPolicyId
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Network policy index"
+    REFERENCE ""
+    ::= { hqosNetworkPolicyEntry 1 }
+
+hqosNetworkPolicyRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Row status of the network policy
+    			 HQoS network policy is created with createAndWait(5)."
+    ::= { hqosNetworkPolicyEntry 2 }
+
+hqosNetworkPolicyDescription  OBJECT-TYPE
+    SYNTAX       TItemDescription
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "User-defined description of the network policy"
+    DEFVAL { ''H }
+    ::= { hqosNetworkPolicyEntry 3 }
+
+hqosNetworkPolicyIngressDefaultActionFC   OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current 
+    DESCRIPTION "Network policy default action FC.
+                 Currently not used. Reserved for future use."
+    ::= { hqosNetworkPolicyEntry 4 }
+
+hqosNetworkPolicyIngressConformance   OBJECT-TYPE
+    SYNTAX       TConformanceLevel
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "Defines network conformance level green or yellow.
+                 Currently not used. Reserved for future use."
+       ::= { hqosNetworkPolicyEntry 5 }
+
+hqosNetworkPolicyEgressRemark  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-only
+    STATUS       current
+    DESCRIPTION "Verifies if remarking is set on network egress.
+    			 Remarking is enabled by default"
+    DEFVAL { false }
+    ::= { hqosNetworkPolicyEntry 6 }
+
+hqosNetworkPolicyLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosNetworkPolicyTable."
+    ::= { hqosNetworkPolicyEntry 7 }
+  
+--
+-- network ingress policy lspexp table
+--
+
+hqosNetworkIngressLSPEXPTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosNetworkIngressLSPEXPEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Information about network ingress policies' mappings."
+    ::= { hqosNetworkObjects 2 }
+
+hqosNetworkIngressLSPEXPEntry OBJECT-TYPE
+    SYNTAX       HqosNetworkIngressLSPEXPEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about LSP EXP mapping for a network policy.
+
+         Some default entries are created by the agent for the
+         default network policy DefPol(1). These cannot be deleted or
+         modified. Other entries are created/deleted by user.
+        "
+    INDEX { hqosNetworkPolicyIndex, hqosNetworkIngressLSPEXP }
+    ::= { hqosNetworkIngressLSPEXPTable 1 }
+
+HqosNetworkIngressLSPEXPEntry ::= SEQUENCE
+    {
+        hqosNetworkIngressLSPEXP            TLspExpValue,
+        hqosNetworkIngressLSPEXPRowStatus   RowStatus,
+        hqosNetworkIngressLSPEXPFC			TFCNameOrEmpty,
+        hqosNetworkIngressLSPEXPConformance TConformanceLevel,
+        hqosNetworkIngressLSPEXPLastChanged TimeStamp
+    }
+
+hqosNetworkIngressLSPEXP  OBJECT-TYPE
+    SYNTAX       TLspExpValue (0..7)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "LSP EXP bit value."
+    ::= { hqosNetworkIngressLSPEXPEntry 1 }
+
+hqosNetworkIngressLSPEXPRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Row status of network ingress mapping"
+    ::= { hqosNetworkIngressLSPEXPEntry 2 }
+
+hqosNetworkIngressLSPEXPFC  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Mapping of LSP EXP to forwarding class."
+    ::= { hqosNetworkIngressLSPEXPEntry 3 }
+
+hqosNetworkIngressLSPEXPConformance  OBJECT-TYPE
+    SYNTAX       TConformanceLevel
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Indentifies conformance level green or yellow for a frame with a LSP EXP bit value."
+    ::= { hqosNetworkIngressLSPEXPEntry 4 }
+
+hqosNetworkIngressLSPEXPLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosNetworkIngressLSPEXPTable.
+        Currently not supported"
+    ::= { hqosNetworkIngressLSPEXPEntry 5 }
+ 
+--
+-- network egress fc table
+--
+
+hqosNetworkEgressFCTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosNetworkEgressFCEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about all network policies' egress FC traffic disposition."
+    ::= { hqosNetworkObjects 3 }
+
+hqosNetworkEgressFCEntry OBJECT-TYPE
+    SYNTAX       HqosNetworkEgressFCEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular network policy's egress
+         per-forwarding-class traffic disposition.
+
+         Entries are created/deleted as an action of creating/deleting
+         a row in the hqosNetworkPolicyTable.
+        "
+    INDEX { hqosNetworkPolicyIndex, hqosNetworkEgressFCNumber, hqosNetworkEgressFCConformance}
+    ::= { hqosNetworkEgressFCTable 1 }
+
+HqosNetworkEgressFCEntry ::= SEQUENCE
+    {
+        hqosNetworkEgressFCNumber				TFCNameOrEmpty,
+        hqosNetworkEgressFCRowStatus			RowStatus,
+        hqosNetworkEgressFCLspExpValue			TLspExpValue,
+        hqosNetworkEgressFCDot1Priority			Dot1PPriority,
+        hqosNetworkEgressFCLastChanged			TimeStamp,
+        hqosNetworkEgressFCConformance			TConformanceLevel
+    }
+
+hqosNetworkEgressFCNumber OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The number of the forwarding class (FC)."
+    ::= { hqosNetworkEgressFCEntry 1 }   
+    
+hqosNetworkEgressFCRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The row status of this row. Only the value of createAndWait(5) is available for
+         row creation"
+    ::= { hqosNetworkEgressFCEntry 2 }
+
+hqosNetworkEgressFCLspExpValue  OBJECT-TYPE
+    SYNTAX       TLspExpValue (0..7)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Network egress remarking value for LSP EXP bits."
+    ::= { hqosNetworkEgressFCEntry 3 }
+
+hqosNetworkEgressFCDot1Priority  OBJECT-TYPE
+    SYNTAX       Dot1PPriority
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+		"Network egress remarking value for Dot1p. 
+        Currently not supported. Reserved for future use."
+    ::= { hqosNetworkEgressFCEntry 4 }
+
+
+hqosNetworkEgressFCLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosNetworkEgressFCTable."
+    ::= { hqosNetworkEgressFCEntry 5 }
+
+hqosNetworkEgressFCConformance OBJECT-TYPE
+    SYNTAX       TConformanceLevel
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Conformance level: green or yellow."
+    ::= { hqosNetworkEgressFCEntry 6 }   
+    
+--
+-- network-queue policy table
+--
+
+hqosNetworkQueuePolicyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosNetworkQueuePolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Information about network queue policy."
+    ::= { hqosNetworkQueueObjects 1 }
+
+hqosNetworkQueuePolicyEntry OBJECT-TYPE
+    SYNTAX       HqosNetworkQueuePolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about network egress queue configuration"
+    INDEX { hqosNetworkQueuePolicy }
+    ::= { hqosNetworkQueuePolicyTable 1 }
+
+HqosNetworkQueuePolicyEntry ::= SEQUENCE
+    {
+        hqosNetworkQueuePolicy                TNamedItem,
+        hqosNetworkQueuePolicyRowStatus       RowStatus,
+        hqosNetworkQueuePolicyDescription     TItemDescription,
+        hqosNetworkQueuePolicyLastChanged     TimeStamp
+    }
+
+hqosNetworkQueuePolicy  OBJECT-TYPE
+    SYNTAX       TNamedItem
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Name of network egress queue policy.
+        
+        This is the index in the table. Should be no more than 6 characters long."
+    ::= { hqosNetworkQueuePolicyEntry 1 }
+
+hqosNetworkQueuePolicyRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The row status. Used for creation of a row in the table."
+    ::= { hqosNetworkQueuePolicyEntry 2 }
+
+hqosNetworkQueuePolicyDescription  OBJECT-TYPE
+    SYNTAX       TItemDescription
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "User-defined description of the network policy. "
+    DEFVAL { ''H }
+    ::= { hqosNetworkQueuePolicyEntry 3 }
+
+hqosNetworkQueuePolicyLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The time when an object in the row was last changed.
+        Currently not supported."
+    ::= { hqosNetworkQueuePolicyEntry 8 }
+
+--
+-- network egress policy queue table
+--
+
+hqosNetworkQueueTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosNetworkQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about network queues."
+    ::= { hqosNetworkQueueObjects 2 }
+
+hqosNetworkQueueEntry OBJECT-TYPE
+    SYNTAX       HqosNetworkQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Network queue configuration"
+    INDEX { hqosNetworkQueuePolicy, hqosNetworkQueue }
+    ::= { hqosNetworkQueueTable 1 }
+
+HqosNetworkQueueEntry ::= SEQUENCE
+    {
+        hqosNetworkQueue                 TQueueId,
+        hqosNetworkQueueRowStatus        RowStatus,
+        hqosNetworkQueueParent           TNamedItemOrEmpty,
+        hqosNetworkQueueLevel            TLevel,
+        hqosNetworkQueueWfqProfile       INTEGER,
+        hqosNetworkQueueType             INTEGER,
+        hqosNetworkQueueHiPriority       TruthValue,
+		hqosNetworkQueueWred           	 TSlopePolicy,
+		hqosNetworkQueueShaper           TShaperId,
+        hqosNetworkQueueLastChanged      TimeStamp
+    }
+
+hqosNetworkQueue  OBJECT-TYPE
+    SYNTAX       TQueueId (1..24)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Network queue identifier.
+        The queue ID is used as an index of the table entry."
+    ::= { hqosNetworkQueueEntry 1 }
+
+hqosNetworkQueueRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { hqosNetworkQueueEntry 2 }
+
+
+hqosNetworkQueueParent  OBJECT-TYPE
+    SYNTAX       TNamedItemOrEmpty
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Network queue parent is not configurable. Reserved for future use."
+    DEFVAL { ''H }
+    ::= { hqosNetworkQueueEntry 3 }
+
+hqosNetworkQueueLevel  OBJECT-TYPE
+    SYNTAX       TLevel
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This specifies the level of priority while feeding to the parent.
+        Priority levels are high(1) or low(2)"
+    DEFVAL { 1 }
+    ::= { hqosNetworkQueueEntry 4 }
+
+hqosNetworkQueueWfqProfile  OBJECT-TYPE
+    SYNTAX       INTEGER (1..16)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The WFQ profile for this network queue"
+    ::= { hqosNetworkQueueEntry 5 }
+
+hqosNetworkQueueType  OBJECT-TYPE
+    SYNTAX       INTEGER {     
+    				unknown(0),
+                    unicast(1),
+                    multicast(2),
+                    broadcast(3)
+                 }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "This object specifies the type of the network queue.
+        The possible values are:
+		-	unknown(0) 
+		-	unicast(1)
+		-	multicast(2)
+		-	broadcast(3)"
+      ::= { hqosNetworkQueueEntry 6 }
+
+
+hqosNetworkQueueHiPriority  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-only
+    STATUS       obsolete
+    DESCRIPTION
+        "The object specifies is this a high-priority queue.
+        This object is obsolete, use object hqosNetworkQueueLevel instead"
+    ::= { hqosNetworkQueueEntry 7 }
+
+
+hqosNetworkQueueWred  OBJECT-TYPE
+    SYNTAX       TSlopePolicy (57..64)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "ID of WRED profile applied to this queue."
+      ::= { hqosNetworkQueueEntry 8 }
+
+hqosNetworkQueueShaper  OBJECT-TYPE
+    SYNTAX       TShaperId (17..64)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "ID of shaping profile applied to this queue. There is no default value"
+    ::= { hqosNetworkQueueEntry 9 }
+
+hqosNetworkQueueLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosNetworkQueueTable.
+        Not supported. Reserved for future use."
+    ::= { hqosNetworkQueueEntry 10 }
+
+--
+-- network queue policy fc table
+--
+
+hqosNetworkQueueFCTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosNetworkQueueFCEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Information which network egress queue traffic with a FC assigned on ingress feeds to."
+    ::= { hqosNetworkQueueObjects 3 }
+
+hqosNetworkQueueFCEntry OBJECT-TYPE
+    SYNTAX       HqosNetworkQueueFCEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Forwarding class to network queue configuratiom"
+    INDEX { hqosNetworkQueuePolicy, hqosNetworkQueueFCNumber, hqosNetworkQueueFCType }
+    ::= { hqosNetworkQueueFCTable 1 }
+
+HqosNetworkQueueFCEntry ::= SEQUENCE
+    {
+        hqosNetworkQueueFCNumber        TFCNameOrEmpty, 
+        hqosNetworkQueueFCType	     	INTEGER,
+        hqosNetworkQueueFCRowStatus     RowStatus,	
+        hqosNetworkQueueFC              TQueueId,
+        hqosNetworkQueueFCLastChanged   TimeStamp
+    }
+
+hqosNetworkQueueFCNumber  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The number of the forwarding class as referenced in the tFCNameTable."
+    ::= { hqosNetworkQueueFCEntry 1 }     
+    
+hqosNetworkQueueFCType OBJECT-TYPE   
+	SYNTAX       INTEGER {
+                 unknown(0),
+                 unicast(1),
+                 multicast(2),
+                 broadcast(3)
+   							 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The type of the queue to be assigned to the forwarding class.
+        The possible values of this object are:
+		- unknown(0) 
+		- unicast(1) 
+		- multicast(2) 
+		- broadcast(3) 
+		This object is part of the index."
+    ::= { hqosNetworkQueueFCEntry 2 }
+    
+
+hqosNetworkQueueFCRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status for this queue.
+        The object serves to create entries in the table."
+    ::= { hqosNetworkQueueFCEntry 3 }
+
+hqosNetworkQueueFC OBJECT-TYPE
+    SYNTAX       TQueueId (1..24)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The queue id to be mapped."
+    ::= { hqosNetworkQueueFCEntry 4 }
+
+hqosNetworkQueueFCLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The time when an object in the row was last changed."
+    ::= { hqosNetworkQueueFCEntry 5 }
+
+--
+--  Service Scheduler policy table
+--
+
+hqosSchedulerPolicyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosSchedulerPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a service scheduler policy. "
+    ::= { hqosSchedulerObjects 1 }
+
+hqosSchedulerPolicyEntry OBJECT-TYPE
+    SYNTAX       HqosSchedulerPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular service scheduler policy."
+    INDEX { 
+    			hqosSchedulerPolicyName, 
+    			hqosSchedulerPolicyType
+           }
+    ::= { hqosSchedulerPolicyTable 1 }
+
+HqosSchedulerPolicyEntry ::= SEQUENCE
+    {
+        hqosSchedulerPolicyName			TNamedItem,
+        hqosSchedulerPolicyRowStatus	RowStatus, 
+        hqosSchedulerPolicyType			INTEGER, 
+        hqosSchedulerPolicyDescription	TItemDescription,
+        hqosSchedulerPolicyLastChanged	TimeStamp
+    }
+
+hqosSchedulerPolicyName  OBJECT-TYPE
+    SYNTAX       TNamedItem
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This is the index of the table. Should be no more that 6 characters long."
+    ::= { hqosSchedulerPolicyEntry 1 }
+
+hqosSchedulerPolicyRowStatus  OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Row Status of the entry.
+        The entry in the table that serves to create rows."
+    ::= { hqosSchedulerPolicyEntry 2 }
+
+hqosSchedulerPolicyType  OBJECT-TYPE
+    SYNTAX      INTEGER   {
+                
+                unknown(0),
+                ingress(1),
+                egress (2),
+                network (3)
+                
+                }
+    			
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Type of the scheduler - ingress or egress.
+        The object can accept one of the three values:
+		-	unknown(0)
+		-	ingress(1)
+		-	egress (2)
+		The value unknown is the default one, but causes the row to be in notReady(3) state.
+		network (3) is not supported"
+    ::= { hqosSchedulerPolicyEntry 3 }
+
+hqosSchedulerPolicyDescription  OBJECT-TYPE
+    SYNTAX      TItemDescription
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "User-description for the scheduler policy"
+    DEFVAL      { ''H }
+    ::= { hqosSchedulerPolicyEntry 4 }
+
+hqosSchedulerPolicyLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosSchedulerPolicyTable.  Reserved for future use."
+    ::= { hqosSchedulerPolicyEntry 5 }
+
+--
+-- Scheduler configuration table
+--
+
+hqosVirtualSchedulerTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF HqosVirtualSchedulerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+		"Information about schedulers belonging to scheduler policies"
+    ::= { hqosSchedulerObjects 2 }
+
+hqosVirtualSchedulerEntry OBJECT-TYPE
+    SYNTAX       HqosVirtualSchedulerEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular Scheduler belonging to a Scheduler 
+        Policy."
+    INDEX { hqosSchedulerPolicyName, hqosSchedulerPolicyType, 
+            hqosVirtualSchedulerName,  hqosVirtualSchedulerLevel}
+    ::= { hqosVirtualSchedulerTable 1 }
+
+HqosVirtualSchedulerEntry ::= SEQUENCE
+    {
+        hqosVirtualSchedulerName			TNamedItem,
+        hqosVirtualSchedulerRowStatus		RowStatus,
+        hqosVirtualSchedulerDescription		TItemDescription,
+        hqosVirtualSchedulerParent			TNamedItemOrEmpty,
+        hqosVirtualSchedulerLevel			TLevel,
+        hqosVirtualSchedulerPriority		INTEGER,
+        hqosVirtualSchedulerWfqProfile		INTEGER,
+        hqosVirtualSchedulerShaper			TShaperId,
+        hqosVirtualSchedulerLastChanged		TimeStamp
+    }
+
+hqosVirtualSchedulerName  OBJECT-TYPE
+    SYNTAX       TNamedItem
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Name of the scheduler."
+    ::= { hqosVirtualSchedulerEntry 1 }
+
+hqosVirtualSchedulerRowStatus  OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Row Status of the entry.
+        Part of the index together with the policy name and the tier. Should be up to 6 characters long."
+    ::= { hqosVirtualSchedulerEntry 2 }
+
+hqosVirtualSchedulerDescription  OBJECT-TYPE
+    SYNTAX      TItemDescription
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "User-defined description for the scheduler policy.
+        Note this is currently not supported (returns empty string, writes not accepted).
+        Reserved for future use."
+    DEFVAL { ''H }
+    ::= { hqosVirtualSchedulerEntry 3 }
+
+hqosVirtualSchedulerParent  OBJECT-TYPE
+    SYNTAX       TNamedItemOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The scheduler to which this scheduler would be feeding to."
+     ::= { hqosVirtualSchedulerEntry 4 }
+
+hqosVirtualSchedulerLevel  OBJECT-TYPE
+    SYNTAX  TLevel
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This specifies the level of priority while feeding to the parent."
+    ::= { hqosVirtualSchedulerEntry 5 }
+
+hqosVirtualSchedulerPriority  OBJECT-TYPE
+    SYNTAX       INTEGER 
+    					{
+    					low(1),
+    					high(2)
+    					}
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Priority of the scheduler."
+    ::= { hqosVirtualSchedulerEntry 6 }
+
+hqosVirtualSchedulerWfqProfile  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The WFQ profile number for this scheduler."
+    ::= { hqosVirtualSchedulerEntry 7 }
+
+hqosVirtualSchedulerShaper  OBJECT-TYPE
+    SYNTAX       TShaperId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "ID of shaping profile applied to scheduler. There is no default value"
+    ::= { hqosVirtualSchedulerEntry 8 }
+
+hqosVirtualSchedulerLastChanged  OBJECT-TYPE
+    SYNTAX       TimeStamp
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Timestamp of last change to this row in hqosVirtualSchedulerTable."
+    ::= { hqosVirtualSchedulerEntry 9 }
+
+
+--
+-- WRED profile table
+--
+
+tWredProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TWredProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  
+        "WRED Profile Table. Each entry in this table defines the WRED 
+        slopes for the high and the low priority traffic."
+    ::= { tWredObjects 1 }
+
+tWredProfileEntry OBJECT-TYPE
+    SYNTAX       TWredProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "WRED Profile Entry."
+    INDEX { tWredProfile }
+    ::= { tWredProfileTable 1 }
+
+TWredProfileEntry ::= SEQUENCE
+    {
+        tWredProfile            TSlopePolicy,
+        tWredRowStatus         	RowStatus,
+        tWredDescription       	TItemDescription,
+        tWredGreenStartAverage	Unsigned32,
+        tWredGreenMaxAverage	Unsigned32,
+        tWredGreenProbability	Unsigned32,
+        tWredYellowStartAverage	Unsigned32,
+        tWredYellowMaxAverage	Unsigned32,
+        tWredYellowProbability  Unsigned32,
+        tWredRedStartAverage    Unsigned32,
+        tWredRedMaxAverage      Unsigned32,
+        tWredRedProbability  	Unsigned32,
+        tWredLastChanged       	TimeStamp
+    }
+
+tWredProfile  OBJECT-TYPE
+    SYNTAX      TSlopePolicy
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "tWredProfile maintains the id of the WRED Profile."
+    ::= { tWredProfileEntry 1 }
+
+tWredRowStatus  OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { tWredProfileEntry 2 }
+
+tWredDescription  OBJECT-TYPE
+    SYNTAX      TItemDescription
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "User-provided description of the profile."
+    DEFVAL { ''H }
+    ::= { tWredProfileEntry 3 }
+
+tWredGreenStartAverage  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Drop start threshold for the green traffic in kilobytes."
+    ::= { tWredProfileEntry 4 } 
+    
+tWredGreenMaxAverage  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Absolute drop threshold for the green traffic in kilobytes."
+    ::= { tWredProfileEntry 5 }
+
+tWredGreenProbability  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Drop probability slope for the green traffic."
+    ::= { tWredProfileEntry 6 }
+
+tWredYellowStartAverage  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Drop start threshold for the Yellow traffic in kilobytes."
+    ::= { tWredProfileEntry 7 } 
+    
+tWredYellowMaxAverage  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Absolute drop threshold for the Yellow traffic in kilobytes."
+    ::= { tWredProfileEntry 8 }
+
+tWredYellowProbability  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Drop probability slope for the Yellow traffic."
+    ::= { tWredProfileEntry 9 }  
+    
+tWredRedStartAverage  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Drop start threshold for the Red traffic in kilobytes."
+    ::= { tWredProfileEntry 10 } 
+    
+tWredRedMaxAverage  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Absolute drop threshold for the Red traffic in kilobytes."
+    ::= { tWredProfileEntry 11 }
+
+tWredRedProbability  OBJECT-TYPE
+    SYNTAX      Unsigned32 
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "Drop probability slope for the Red traffic."
+    ::= { tWredProfileEntry 12 }
+
+
+tWredLastChanged  OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Timestamp of when this entry was last changed."
+    ::= { tWredProfileEntry 13 }
+
+--
+-- TailDrop profile table
+--
+
+qosTailDropProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QoSTailDropProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  
+        "Tail-drop profile Table. 
+		Each entry in this table defines set of tail-drop parameters that may be enforced 
+		on a queue or a policy."
+    ::= { tCongestionAvoidanceProfileObjects 1 }
+
+qosTailDropProfileEntry OBJECT-TYPE
+    SYNTAX       QoSTailDropProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Tail-drop Profile Entry."
+    INDEX { qosTailDropProfile}
+    ::= { qosTailDropProfileTable 1 }
+
+QoSTailDropProfileEntry ::= SEQUENCE
+    {
+        qosTailDropProfile				TTailDropId,
+        qosTailDropRowStatus			RowStatus,
+		qosMaxTailDropYellowTreshold    TTreshold,
+		qosMaxTailDropRedTreshold       TTreshold
+    }
+
+qosTailDropProfile  OBJECT-TYPE
+    SYNTAX      TTailDropId (1..30)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "qosTailDropProfile maintains the ID of the tail-drop profile"
+    ::= { qosTailDropProfileEntry 1 }
+        
+qosTailDropRowStatus  OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { qosTailDropProfileEntry 2 }
+
+qosMaxTailDropYellowTreshold  OBJECT-TYPE
+    SYNTAX       TTreshold
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+         "Maximum tail drop yellow treshold in %.Valid values are 25,50,75,100%"
+    DEFVAL { 100 }
+    ::= { qosTailDropProfileEntry 3 }
+    
+qosMaxTailDropRedTreshold  OBJECT-TYPE
+    SYNTAX       TTreshold
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Maximum tail drop red treshold in %.Valid values are 25,50,75,100%"
+    DEFVAL { 100 }
+    ::= { qosTailDropProfileEntry 4 }
+
+--
+-- SRED profile table
+--
+
+qosSredProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QoSSredProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  
+        "SRED profile configuration Table. 
+		Each entry in this table defines set of SRED parameters that may be enforced 
+		on a queue or a policy."
+    ::= { tCongestionAvoidanceProfileObjects 2 }
+
+qosSredProfileEntry OBJECT-TYPE
+    SYNTAX       QoSSredProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "SRED Profile Entry."
+    INDEX { qosTailDropProfile}
+    ::= { qosSredProfileTable 1 }
+
+QoSSredProfileEntry ::= SEQUENCE
+    {
+        qosSredProfile					TSredId,
+        qosSredRowStatus				RowStatus,
+		qosMaxSredYellowTreshold    	TTreshold,
+		qosMaxSredYellowProbaility  	TTreshold,
+		qosMaxSredRedTreshold   		TTreshold,
+		qosMaxSredRedProbability		TTreshold
+    }
+
+qosSredProfile  OBJECT-TYPE
+    SYNTAX      TSredId (1..30)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "qosSredProfile maintains the ID of the SRED profile"
+    ::= { qosSredProfileEntry 1 }
+        
+qosSredRowStatus  OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { qosSredProfileEntry 2 }
+
+qosMaxSredYellowTreshold  OBJECT-TYPE
+    SYNTAX       TTreshold
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+         "Maximum SRED yellow treshold in %.Valid values are 25,50,75,100%"
+    DEFVAL { 100 }
+    ::= { qosSredProfileEntry 3 }
+    
+qosMaxSredYellowProbaility  OBJECT-TYPE
+    SYNTAX       TTreshold
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Maximum SRED yellow probability in %.Valid values are 25,50,75,100%"
+    DEFVAL { 100 }
+    ::= { qosSredProfileEntry 4 }
+
+qosMaxSredRedTreshold  OBJECT-TYPE
+    SYNTAX       TTreshold
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+         "Maximum SRED Red treshold in %.Valid values are 25,50,75,100%"
+    DEFVAL { 100 }
+    ::= { qosSredProfileEntry 5 }
+    
+qosMaxSredRedProbability  OBJECT-TYPE
+    SYNTAX       TTreshold
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Maximum SRED Red probability in %.Valid values are 25,50,75,100%"
+    DEFVAL { 100 }
+    ::= { qosSredProfileEntry 6 }
+     
+--
+-- Shaper profile table
+--
+
+tShaperProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TShaperProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  
+        "Shaper profile Table. 
+		Each entry in this table defines set of shaping parameters that may be enforced 
+		on scheduler, port or queue."
+    ::= { tShaperObjects 1 }
+
+tShaperProfileEntry OBJECT-TYPE
+    SYNTAX       TShaperProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Shaper Profile Entry."
+    INDEX { tShaperProfileType, tShaperProfile, tShaperProfileDirection, tShaperProfileLevel}
+    ::= { tShaperProfileTable 1 }
+
+TShaperProfileEntry ::= SEQUENCE
+    {
+        tShaperProfileType		INTEGER,
+        tShaperProfile          TShaperId,
+        tShaperProfileDirection INTEGER,
+        tShaperProfileLevel		INTEGER,
+        tShaperRowStatus        RowStatus,
+        tShaperDescription      TItemDescription,
+		tShaperCIR              TRateValue,
+        tShaperPIR              TRateValue,
+		tShaperCBS              INTEGER,
+		tShaperMBS              INTEGER,
+        tShaperLastChanged      TimeStamp
+    }
+
+tShaperProfileType  OBJECT-TYPE
+    SYNTAX      INTEGER {
+    			qos(1),
+    			hqos(2)  			
+    		   }
+    
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The type of the shaper. If used in QoS configuration(qos(1)) or
+        in HQoS configuration (hqos(2))"
+    ::= { tShaperProfileEntry 1 }
+
+tShaperProfile  OBJECT-TYPE
+    SYNTAX      TShaperId (1..216)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "tShaperProfile maintains the ID of the shaping profile 
+        identifying the profile."
+    ::= { tShaperProfileEntry 2 }
+
+
+tShaperProfileDirection  OBJECT-TYPE
+    SYNTAX      INTEGER {
+    			serviceIngress(1),
+    			serviceEgress(2),
+    			networkEgress(3),
+			vlanEgress(4)    			
+    		   }
+    
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "The direction of the shaper - service ingress, service egress,
+        network egress or vlan egress."
+    ::= { tShaperProfileEntry 3 }
+
+tShaperProfileLevel  OBJECT-TYPE
+    SYNTAX      INTEGER {
+    			port(1),
+    			queue(2),
+    			l1Scheduler(3),
+    			l2Scheduler(4),
+    			qosPolicy(5)
+    		   }
+    
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Level of the shaper. For QoS shapers choose qosPolicy(5).
+		For HQoS configuration l1Scheduler(3) or l2Scheduler(4)"
+    ::= { tShaperProfileEntry 4 }
+        
+tShaperRowStatus  OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { tShaperProfileEntry 5 }
+
+tShaperDescription  OBJECT-TYPE
+    SYNTAX      TItemDescription
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION
+        "User-provided description of the shaper profile.
+        Not supported."
+    DEFVAL { ''H }
+    ::= { tShaperProfileEntry 6 }      
+    
+tShaperCIR  OBJECT-TYPE
+    SYNTAX       TRateValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Commited Information Rate in kbps."
+    DEFVAL { 0 }
+    ::= { tShaperProfileEntry 7 }
+    
+tShaperPIR  OBJECT-TYPE
+    SYNTAX       TRateValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Peak information rate allowed in kbps."
+    DEFVAL { 100 }
+    ::= { tShaperProfileEntry 8 }
+
+tShaperCBS  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The commited burst size allowed in kilobytes."
+    DEFVAL { 0 }
+    ::= { tShaperProfileEntry 9 }
+    
+tShaperMBS  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The max burst size allowed in kilobytes."
+    DEFVAL { 6000 }
+    ::= { tShaperProfileEntry 10 }
+
+tShaperLastChanged  OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Timestamp of when this entry was last changed.
+        Not supported."
+    ::= { tShaperProfileEntry 11 }
+      
+--
+-- Wfq object definition
+--  
+
+--
+-- Wfq service table
+-- 
+      
+tWfqServiceProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TWfqServiceProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " "
+    ::= { tWfqObjects 1 }
+  
+tWfqServiceProfileEntry OBJECT-TYPE
+    SYNTAX       TWfqServiceProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about the service WFQ profiles available."
+    INDEX { tWfqServiceProfileNumber, tWfqServiceProfileDirection }
+    ::= { tWfqServiceProfileTable 1 }
+
+TWfqServiceProfileEntry ::= SEQUENCE
+    {
+        tWfqServiceProfileNumber       INTEGER,
+        tWfqServiceProfileDirection    INTEGER,
+        tWfqServiceProfileRowStatus    RowStatus,
+        tWfqServiceProfileWeight       INTEGER
+     }
+     
+tWfqServiceProfileNumber  OBJECT-TYPE
+    SYNTAX       INTEGER (0..61)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The ID of the WFQ service profile.
+        Profile 0 can not be modified or deleted."
+    ::= { tWfqServiceProfileEntry 1 }   
+    
+tWfqServiceProfileDirection  OBJECT-TYPE
+    SYNTAX       INTEGER  {
+                 
+                 unknown(0),
+                 ingress(1),
+                 egress (2)
+                 
+                 }
+    
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The direction of the WFQ service profile - ingress or egress."
+    ::= { tWfqServiceProfileEntry 2 }
+ 
+tWfqServiceProfileRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The row status of the WFQ service profile."
+    ::= { tWfqServiceProfileEntry 3 }   
+    
+tWfqServiceProfileWeight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the WFQ service profile
+        is applied."
+    ::= { tWfqServiceProfileEntry 4 }   
+
+--
+-- Wfq network table
+-- 
+
+tWfqNetworkProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TWfqNetworkProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " "
+    ::= { tWfqObjects 2 }   
+    
+tWfqNetworkProfileEntry OBJECT-TYPE
+    SYNTAX       TWfqNetworkProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a the service WFQ profiles available."
+    INDEX { tWfqNetworkProfileNumber }
+    ::= { tWfqNetworkProfileTable 1 }
+ 
+TWfqNetworkProfileEntry ::= SEQUENCE
+    {
+        tWfqNetworkProfileNumber       INTEGER,
+        tWfqNetworkProfileRowStatus    RowStatus,
+        tWfqNetworkProfileWeight       INTEGER,
+        tWfqNetworkProfileCIRWeight    INTEGER
+
+     }
+     
+tWfqNetworkProfileNumber  OBJECT-TYPE
+    SYNTAX       INTEGER (0..16)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The ID of the WFQ network profile.
+         Profile 0 can not be modified or deleted."
+    ::= { tWfqNetworkProfileEntry 1 }   
+     
+tWfqNetworkProfileRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The row status of the WFQ network profile."
+    ::= { tWfqNetworkProfileEntry 2 }   
+    
+tWfqNetworkProfileWeight  OBJECT-TYPE
+    SYNTAX       INTEGER (1..220)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the WFQ network profile
+        is applied."
+    ::= { tWfqNetworkProfileEntry 3 }   
+    
+tWfqNetworkProfileCIRWeight  OBJECT-TYPE
+    SYNTAX       INTEGER (1..220)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative CIR weight for the packets where the WFQ network profile
+        is applied."
+    ::= { tWfqNetworkProfileEntry 4 }  
+  
+--
+-- Wfq scheduler table
+-- 
+
+tWfqSchedulerProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF TWfqSchedulerProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        " "
+    ::= { tWfqObjects 3 }
+  
+tWfqSchedulerProfileEntry OBJECT-TYPE
+    SYNTAX       TWfqSchedulerProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a the scheduler WFQ profiles available."
+    INDEX { tWfqSchedulerProfileNumber, tWfqSchedulerProfileDirection }
+    ::= { tWfqSchedulerProfileTable 1 }
+
+TWfqSchedulerProfileEntry ::= SEQUENCE
+    {
+        tWfqSchedulerProfileNumber       INTEGER,
+        tWfqSchedulerProfileDirection    INTEGER,
+        tWfqSchedulerProfileRowStatus    RowStatus,
+        tWfqSchedulerProfileWeight       INTEGER,
+        tWfqSchedulerProfileCIRWeight	 INTEGER
+     }
+     
+tWfqSchedulerProfileNumber  OBJECT-TYPE
+    SYNTAX       INTEGER (0..48)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The ID of the WFQ scheduler profile.
+         Profile 0 can not be modified or deleted."
+    ::= { tWfqSchedulerProfileEntry 1 }   
+    
+tWfqSchedulerProfileDirection  OBJECT-TYPE
+    SYNTAX       INTEGER  {
+                 
+                 unknown(0),
+                 ingress(1),
+                 egress (2)
+                 
+                 }
+    
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The direction of the WFQ scheduler profile - ingress or egress."
+    ::= { tWfqSchedulerProfileEntry 2 }
+ 
+tWfqSchedulerProfileRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The row status of the WFQ scheduler profile."
+    ::= { tWfqSchedulerProfileEntry 3 }   
+    
+tWfqSchedulerProfileWeight  OBJECT-TYPE
+    SYNTAX       INTEGER (1..220)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the WFQ scheduler profile
+        is applied."
+    ::= { tWfqSchedulerProfileEntry 4 }   
+
+tWfqSchedulerProfileCIRWeight  OBJECT-TYPE
+    SYNTAX       INTEGER (1..220)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative CIR weight for the packets where the WFQ scheduler profile
+        is applied."
+    ::= { tWfqSchedulerProfileEntry 5 }
+
+--
+-- QoS scheduling entry table
+-- 
+
+qosSchedulingProfileTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosSchedulingProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about scheduling profiles "
+    ::= { qosSchedulingProfileObjects 1 }
+  
+qosSchedulingProfileEntry OBJECT-TYPE
+    SYNTAX       QosSchedulingProfileEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a the scheduling profiles available."
+    INDEX { qosSchedulingProfile, qosSchedulingProfileDirection, qosSchedulingType}
+    ::= { qosSchedulingProfileTable 1 }
+
+
+QosSchedulingProfileEntry ::= SEQUENCE
+    {
+        qosSchedulingProfile			INTEGER,
+        qosSchedulingProfileDirection	INTEGER,
+		qosSchedulingType				INTEGER,
+		qosSchedulingRowStatus		    RowStatus,
+		qosSchedulingQ1Weight			INTEGER,
+		qosSchedulingQ2Weight			INTEGER,
+		qosSchedulingQ3Weight			INTEGER,
+		qosSchedulingQ4Weight			INTEGER,
+		qosSchedulingQ5Weight			INTEGER,
+		qosSchedulingQ6Weight			INTEGER,
+		qosSchedulingQ7Weight			INTEGER,
+		qosSchedulingQ8Weight			INTEGER
+     }
+     
+qosSchedulingProfile  OBJECT-TYPE
+    SYNTAX       INTEGER (1..26)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The ID of the scheduling profile."
+    ::= { qosSchedulingProfileEntry 1 }   
+    
+qosSchedulingProfileDirection  OBJECT-TYPE
+    SYNTAX       INTEGER  {            
+                 unknown(0),
+                 ingress(1),
+                 egress (2) 
+                 }
+    
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The direction of the WFQ scheduler profile - ingress or egress.
+        Reserved for future use"
+    ::= { qosSchedulingProfileEntry 2 }
+
+qosSchedulingType  OBJECT-TYPE
+    SYNTAX       INTEGER  { 
+                 sp(1),
+                 wrr (2),
+                 hybrid-1 (3),
+                 hybrid-2 (4),
+                 hybrid-3 (5),
+                 hybrid-4 (6),
+                 hybrid-5 (7),
+                 hybrid-6 (8),
+                 drr (9),
+				 mdrr-1 (10),
+                 mdrr-2 (11),
+                 mdrr-3 (12),
+                 mdrr-4 (13),
+                 mdrr-5 (14),
+                 mdrr-6 (15)
+                 }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The the of scheduling profile.
+        One of the following values can be chosen
+		unknown(0),
+        sp(1),
+        wrr (2),
+        hybrid-1 (3),
+        hybrid-2 (4),
+        hybrid-3 (5),
+        hybrid-4 (6),
+        hybrid-5 (7),
+        hybrid-6 (8),
+		drr (9),
+		mdrr-1 (10),
+		mdrr-2 (11),
+		mdrr-3 (12),
+		mdrr-4 (13),
+		mdrr-5 (14),
+		mdrr-6 (15)"
+    ::= { qosSchedulingProfileEntry 3 }
+
+qosSchedulingRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "The row status of the scheduling profile."
+    ::= { qosSchedulingProfileEntry 4 } 
+       
+qosSchedulingQ1Weight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the scheduling profile
+        is applied for queue 1."
+    ::= { qosSchedulingProfileEntry 5 }   
+
+qosSchedulingQ2Weight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the scheduling profile
+        is applied for queue 2."
+    ::= { qosSchedulingProfileEntry 6 } 
+
+qosSchedulingQ3Weight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the scheduling profile
+        is applied for queue 3."
+    ::= { qosSchedulingProfileEntry 7 } 
+    
+qosSchedulingQ4Weight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the scheduling profile
+        is applied for queue 4."
+    ::= { qosSchedulingProfileEntry 8 } 
+
+qosSchedulingQ5Weight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the scheduling profile
+        is applied for queue 5."
+    ::= { qosSchedulingProfileEntry 9 } 
+    
+qosSchedulingQ6Weight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the scheduling profile
+        is applied for queue 6."
+    ::= { qosSchedulingProfileEntry 10 } 
+    
+qosSchedulingQ7Weight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the scheduling profile
+        is applied for queue 7."
+    ::= { qosSchedulingProfileEntry 11 } 
+    
+qosSchedulingQ8Weight  OBJECT-TYPE
+    SYNTAX       INTEGER
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The relative weight for the packets where the scheduling profile
+        is applied for queue 8."
+    ::= { qosSchedulingProfileEntry 12 } 
+     
+--
+-- qos service policy table
+--
+
+qosServicePolicyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosServicePolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Qos service policy table. Keeps comman information for the QoS service policy "
+    ::= { qosServicePolicyObjects 1 }
+
+qosServicePolicyEntry OBJECT-TYPE
+    SYNTAX       QosServicePolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular QoS service Policy.
+        "
+    INDEX { qosServicePolicy }
+    ::= { qosServicePolicyTable 1 }
+
+QosServicePolicyEntry ::= SEQUENCE
+    {
+        qosServicePolicy							TNamedItem,
+		qosServicePolicyRowStatus					RowStatus,
+        qosServicePolicyDescription					TItemDescription
+    }
+
+qosServicePolicy  OBJECT-TYPE
+    SYNTAX       TNamedItem
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "QoS service policy index. String up to 6 characters"
+    REFERENCE ""
+    ::= { qosServicePolicyEntry 1 }
+
+qosServicePolicyRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Row status of the QoS network policy.
+    			 QoS service policy is created with createAndWait(5)."
+    ::= { qosServicePolicyEntry 2 }
+
+
+qosServicePolicyDescription  OBJECT-TYPE
+    SYNTAX       TItemDescription
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "User-defined description of the QoS service policy"
+    DEFVAL { ''H }
+    ::= { qosServicePolicyEntry 3 }
+  
+--
+-- service ingress policy table
+--
+
+qosServiceIngressPolicyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosServiceIngressPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about all QoS service ingress policies' configuration."
+    ::= { qosServicePolicyObjects 2 }
+
+qosServiceIngressPolicyEntry OBJECT-TYPE
+    SYNTAX       QosServiceIngressPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular service policy's ingress
+         per-forwarding-class traffic disposition.
+
+         Entries are created/deleted as an action of creating/deleting
+         a row in the qosServiceIngressTable.
+        "
+    INDEX { qosServicePolicy}
+    ::= { qosServiceIngressPolicyTable 1 }
+
+    
+QosServiceIngressPolicyEntry ::= SEQUENCE
+    {           
+        qosServPolicyShaperProfile						TShaperId,
+        qosServPolicySchedulingProfile					TSSchedulingProfile,
+        qosServPolicyTailDropProfile					TTailDropId
+    }
+ 
+qosServPolicyShaperProfile  OBJECT-TYPE
+    SYNTAX       TShaperId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Shaper profile ID. Valid shaper profile Id range is 9-57.
+        To remove the shaper profile use ID 0"
+    ::= { qosServiceIngressPolicyEntry 1 }
+
+qosServPolicySchedulingProfile  OBJECT-TYPE
+    SYNTAX       TSSchedulingProfile
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Scheduling profile ID. Valid scheduling profile Id range
+        is 1-8. To remove the scheduling profile use ID 0"
+    ::= { qosServiceIngressPolicyEntry 2 } 
+    
+qosServPolicyTailDropProfile  OBJECT-TYPE
+    SYNTAX       TTailDropId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The ID of a Tail drop profile configured. Valid tail-drop profile Id range
+        is 1-5. To remove the scheduling profile use ID 0"
+    ::= { qosServiceIngressPolicyEntry 3 } 
+
+--
+-- service ingress queue table
+--
+
+qosServiceIngressQueueTable OBJECT-TYPE
+	SYNTAX       SEQUENCE OF QosServiceIngressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about all QoS service ingress policies' configuration."
+    ::= { qosServicePolicyObjects 3 }
+
+qosServiceIngressQueueEntry OBJECT-TYPE
+    SYNTAX       QosServiceIngressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular service policy's ingress
+         per-forwarding-class traffic disposition.
+
+         Entries are created/deleted as an action of creating/deleting
+         a row in the qosServiceIngressTable.
+        "
+    INDEX { qosServicePolicy}
+    ::= { qosServiceIngressQueueTable 1 }
+
+    
+QosServiceIngressQueueEntry ::= SEQUENCE
+    {                                 
+        qosServInQueueQueue            		TQueueId,
+        qosServInQueueRowStatus        		RowStatus,
+        qosServInQueueShaperProfile			TShaperId,
+        qosServInQueueTailDropProfile		TTailDropId
+    }
+
+qosServInQueueQueue  OBJECT-TYPE
+    SYNTAX       TQueueId (1..8)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Service queue identifier.
+        The queue ID is used as an index of the table entry."
+    ::= { qosServiceIngressQueueEntry 1 }
+
+qosServInQueueRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { qosServiceIngressQueueEntry 2 }
+
+qosServInQueueTailDropProfile  OBJECT-TYPE
+    SYNTAX       TTailDropId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The ID of a Tail drop profile configured. Valid tail-drop profile Id range
+        is 1-5. To remove the scheduling profile use ID 0"
+    ::= { qosServiceIngressQueueEntry 4 } 
+
+qosServInQueueShaperProfile  OBJECT-TYPE
+    SYNTAX       TShaperId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Shaper profile ID. Valid shaper profile Id range is 9-57.
+        To remove the shaper profile use ID 0"
+    ::= { qosServiceIngressQueueEntry 3 } 
+
+--
+-- qos network policy table
+--
+
+qosNetworkPolicyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosNetworkPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Qos network policy table. Keeps comman information for the QoS network policy "
+    ::= { qosNetworkPolicyObjects 1 }
+
+qosNetworkPolicyEntry OBJECT-TYPE
+    SYNTAX       QosNetworkPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular QoS network Policy.
+
+		 Default Entry is created by the agent, other entries are
+         created by user.
+        "
+    INDEX { qosNetworkPolicy }
+    ::= { qosNetworkPolicyTable 1 }
+
+QosNetworkPolicyEntry ::= SEQUENCE
+    {
+        qosNetworkPolicy							TNamedItem,
+		qosNetworkPolicyRowStatus					RowStatus,
+        qosNetworkPolicyDescription					TItemDescription
+    }
+
+qosNetworkPolicy  OBJECT-TYPE
+    SYNTAX       TNamedItem
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "QoS network policy index. String up to 6 characters"
+    REFERENCE ""
+    ::= { qosNetworkPolicyEntry 1 }
+
+qosNetworkPolicyRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Row status of the QoS network policy.
+    			 QoS Network policy is created with createAndWait(5)."
+    ::= { qosNetworkPolicyEntry 2 }
+
+
+qosNetworkPolicyDescription  OBJECT-TYPE
+    SYNTAX       TItemDescription
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "User-defined description of the QoS network policy"
+    DEFVAL { ''H }
+    ::= { qosNetworkPolicyEntry 3 }
+    
+--
+-- QoS network ingress policy table
+--
+
+qosNetworkIngressTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QoSNetworkIngressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Information about QoS network ingress policy."
+    ::= { qosNetworkPolicyObjects 2 }
+
+qosNetworkIngressEntry OBJECT-TYPE
+    SYNTAX       QoSNetworkIngressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a QoS network ingress policy.
+
+         Some default entries are created by the agent . These cannot be deleted 
+         Other entries are created/deleted by user.
+        "
+    INDEX { qosNetworkPolicy}
+    ::= { qosNetworkIngressTable 1 }
+
+QoSNetworkIngressEntry ::= SEQUENCE
+    {
+		qosNetworkIngressFC					TFCNameOrEmpty,
+		qosNetworkIngressConformance 		TConformanceLevel,
+        qosTrustDot1pMode            		TruthValue,
+		qosTrustDot1pModePreservePriority	TruthValue,
+		qosTrustDscpMode            		TruthValue
+    }
+
+qosNetworkIngressFC  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Mapping of ingress traffic to forwarding class."
+    ::= { qosNetworkIngressEntry 1 }
+
+qosNetworkIngressConformance  OBJECT-TYPE
+    SYNTAX       TConformanceLevel
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Indentifies conformance level green or yellow for a frames through a forwarding class."
+    ::= { qosNetworkIngressEntry 2 }
+
+qosTrustDot1pMode  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Enables/disables Dot1p trust mode.
+        802.1p is taken from packet.
+        Default mode is untrusted"
+    ::= { qosNetworkIngressEntry 3 }
+
+qosTrustDot1pModePreservePriority  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Enables/disables Dot1p trust mode and preserve priority.
+        802.1p is taken from packet and is preserved on egress.
+        Default mode is untrusted"
+    ::= { qosNetworkIngressEntry 4 }
+
+qosTrustDscpMode  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Enables/disables DSCP trust mode.
+        DSCP is taken from packet.
+        Default mode is untrusted"
+    ::= { qosNetworkIngressEntry 5 }
+
+--
+-- network egress policy table
+--
+
+qosNetworkEgressTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosNetworkEgressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about all QoS network policies' egress FC traffic disposition."
+    ::= { qosNetworkPolicyObjects 3 }
+
+qosNetworkEgressEntry OBJECT-TYPE
+    SYNTAX       QosNetworkEgressEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular network policy's egress
+         per-forwarding-class traffic disposition.
+
+         Entries are created/deleted as an action of creating/deleting
+         a row in the qosNetworkEgressTable.
+        "
+    INDEX { qosNetworkPolicy}
+    ::= { qosNetworkEgressTable 1 }
+
+    
+QosNetworkEgressEntry ::= SEQUENCE
+    {
+        qosNetPolicySchedulingProfile				TSSchedulingProfile, 
+        qosNetPolicyShaperProfile					TShaperId,
+        qosNetPolicyTailDropProfile					TTailDropId,
+        qosNetPolicySredProfile						TSredId
+    }
+
+   
+qosNetPolicySchedulingProfile  OBJECT-TYPE
+    SYNTAX       TSSchedulingProfile
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The ID of a scheduling profile configured. Valid scheduling profile Id range
+        is 1-8. To remove the scheduling profile use ID 0"
+    ::= { qosNetworkEgressEntry 1 }   
+
+ 
+qosNetPolicyShaperProfile  OBJECT-TYPE
+    SYNTAX       TShaperId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Shaper profile ID. Valid shaper profile Id range is 1-8.
+        To remove the shaper profile use ID 0"
+    ::= { qosNetworkEgressEntry 2 }
+
+qosNetPolicyTailDropProfile  OBJECT-TYPE
+    SYNTAX       TTailDropId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The ID of a Tail drop profile configured. Valid tail-drop profile Id range
+        is 1-8. To remove the scheduling profile use ID 0"
+    ::= { qosNetworkEgressEntry 3 }   
+
+ 
+qosNetPolicySredProfile  OBJECT-TYPE
+    SYNTAX       TSredId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The SRED profile ID. Valid SRED profile Id range is 1-8.
+        To remove the SRED profile use ID 0"
+    ::= { qosNetworkEgressEntry 4 }
+    
+--
+-- QoS network egress policy queue table
+--
+
+qosNetworkEgressQueueTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosNetworkEgressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about QoS network queues."
+    ::= { qosNetworkPolicyObjects 4 }
+
+qosNetworkEgressQueueEntry OBJECT-TYPE
+    SYNTAX       QosNetworkEgressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Qos network queue configuration"
+    INDEX { qosNetworkPolicy,qosNetworkQueue }
+    ::= { qosNetworkEgressQueueTable 1 }
+
+QosNetworkEgressQueueEntry ::= SEQUENCE
+    {
+        qosNetworkQueue                 TQueueId,
+        qosNetworkQueueRowStatus        RowStatus,
+        qosNetworkQueueShaperProfile			TShaperId,
+        qosNetworkQueueTailDropProfile			TTailDropId,
+        qosNetworkQueueSredProfile				TSredId
+    }
+
+qosNetworkQueue  OBJECT-TYPE
+    SYNTAX       TQueueId (1..8)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Network queue identifier.
+        The queue ID is used as an index of the table entry."
+    ::= { qosNetworkEgressQueueEntry 1 }
+
+qosNetworkQueueRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { qosNetworkEgressQueueEntry 2 }
+
+
+qosNetworkQueueShaperProfile  OBJECT-TYPE
+    SYNTAX       TShaperId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Shaper profile on this queue"
+    ::= { qosNetworkEgressQueueEntry 3 }
+
+qosNetworkQueueTailDropProfile  OBJECT-TYPE
+    SYNTAX       TTailDropId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Tail-drop profile on this queue"
+    ::= { qosNetworkEgressQueueEntry 4 }
+    
+qosNetworkQueueSredProfile  OBJECT-TYPE
+    SYNTAX       TSredId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Sred profile on this queue"
+    ::= { qosNetworkEgressQueueEntry 5 }
+     
+--
+-- QoS global table
+--
+
+qosGlobalIngressMapTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosGlobalIngressMapEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Global Qos Configuration table."
+    ::= { qosGlobalObjects 1 }
+
+qosGlobalIngressMapEntry OBJECT-TYPE
+    SYNTAX       QosGlobalIngressMapEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Global Ingress QoS Configuration table"
+    INDEX { qosIngressMapType, qosIngressMapValue }
+    ::= { qosGlobalIngressMapTable 1 }
+
+QosGlobalIngressMapEntry ::= SEQUENCE
+    {
+        qosIngressMapType				INTEGER,
+        qosIngressMapValue				INTEGER,
+        qosIngressRowStatus        		RowStatus,
+        qosIngressFC					TFCNameOrEmpty,
+        qosIngressFCConformance			TConformanceLevel
+    }
+
+qosIngressMapType  OBJECT-TYPE
+    SYNTAX		INTEGER {
+                dot1p(1),
+                dscp(2)
+    }
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "The type of the configuration entry for this mapping."
+    ::= { qosGlobalIngressMapEntry 1 }
+    
+
+qosIngressMapValue  OBJECT-TYPE
+    SYNTAX       INTEGER (0..64)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Specify DSCP or Dot1p value to be mapped to a Formawding class"
+    ::= { qosGlobalIngressMapEntry 2 }
+
+qosIngressRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table. The entry is created by qosIngressMapType and qosIngressMapValue"
+    ::= { qosGlobalIngressMapEntry 3 }
+
+qosIngressFC  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION  "Forwarding class to which the traffic will flow"
+    ::= { qosGlobalIngressMapEntry 4 }
+    
+qosIngressFCConformance  OBJECT-TYPE
+    SYNTAX       TConformanceLevel
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION  "Conformance level: green or yellow"
+    ::= { qosGlobalIngressMapEntry 5 }
+
+qosGlobalEgressRemarkTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosGlobalEgressRemarkEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Global Qos Egress Configuration table."
+    ::= { qosGlobalObjects 2 }
+    
+qosGlobalEgressRemarkEntry OBJECT-TYPE
+    SYNTAX       QosGlobalEgressRemarkEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Global Egress QoS Configuration table"
+    INDEX { qosEgressFC, qosEgressFCConformance }
+    ::= { qosGlobalEgressRemarkTable 1 }
+
+QosGlobalEgressRemarkEntry ::= SEQUENCE
+    {
+        qosEgressFC						TFCNameOrEmpty,
+        qosEgressFCConformance			TConformanceLevel,
+		qosEgressRowStatus        		RowStatus,
+        qosEgressRemarkType				INTEGER,
+        qosEgressRemarkValue			INTEGER
+    }
+
+qosEgressFC  OBJECT-TYPE
+    SYNTAX       TFCNameOrEmpty
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION "Choose forwarding class to configure egress remarking"
+    ::= { qosGlobalEgressRemarkEntry 1 }
+ 
+qosEgressFCConformance  OBJECT-TYPE
+    SYNTAX       TConformanceLevel
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Previous conformance level: green or yellow"
+    ::= { qosGlobalEgressRemarkEntry 2 } 
+
+qosEgressRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { qosGlobalEgressRemarkEntry 3 }
+
+  
+qosEgressRemarkType  OBJECT-TYPE
+    SYNTAX		INTEGER {
+                dot1p(1),
+                dscp(2)
+    }
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Choose what fields in frame are going to be remarked(DSCP or Dot1p).
+        Dscp type is not supported"
+    ::= { qosGlobalEgressRemarkEntry 4 }
+    
+
+qosEgressRemarkValue  OBJECT-TYPE
+    SYNTAX       INTEGER (0..63)
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Choose new value of field specified in qosEgressRemarkType to be remarked."
+    ::= { qosGlobalEgressRemarkEntry 5 }
+
+--
+-- QoS Service Table.
+--
+
+qosServiceTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF QosServiceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table will be responsible for managing QoS service configuration"
+   ::= { qosServiceObjects 1 }
+
+qosServiceEntry OBJECT-TYPE
+   SYNTAX        QosServiceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table will be responsible for managing QoS configuration on a service."
+   INDEX       { qosServiceIndex}
+      ::= { qosServiceTable 1 }
+
+QosServiceEntry ::= SEQUENCE {
+	qosServiceIndex						Integer32,
+	qosServiceRowStatus        			RowStatus,
+	qosServicePolicyOnServ         		TNamedItem
+}
+
+qosServiceIndex OBJECT-TYPE
+   SYNTAX        Integer32 (0..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This is a unique index for an entry in the
+        qosServiceTable."
+   REFERENCE
+       "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+        and F. Kastenholtz, June 2000"
+   ::= { qosServiceEntry 1 }
+
+qosServiceRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION	 "This object indicates the status of this row. The
+	values supported during a set operation are createAndGo(4) 
+	active(1), notInService(2) and destroy(6).
+	Creation or deletion of an entry in this table means enable or removal
+	of QoS policy on a specific service entry."
+    ::= { qosServiceEntry 2 }  
+    
+qosServicePolicyOnServ OBJECT-TYPE
+   SYNTAX        TNamedItem
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Service QoS Policy Id to be applied on a service."
+   ::= { qosServiceEntry 3 }
+
+--
+-- QoS SAP Table.
+--
+
+qosServiceSapTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF QosServiceSapEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION	"A table that contains QoS SAP information."
+   ::= { qosServiceObjects 2 }
+
+qosServiceSapEntry OBJECT-TYPE
+   SYNTAX        QosServiceSapEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table will be responsible for managing QoS configuration on a SAP."
+   INDEX       { qosServiceIndex, qosServiceSapPortId, qosServiceSapEncapValue}
+      ::= { qosServiceSapTable 1 }
+
+QosServiceSapEntry ::= SEQUENCE {
+	qosServiceSapPortId					INTEGER,
+	qosServiceSapEncapValue				TQEncapVal,
+	qosServiceSapRowStatus        		RowStatus,
+	qosServiceSapPolicyEnable          	TruthValue
+}
+
+   
+qosServiceSapPortId OBJECT-TYPE
+   SYNTAX        INTEGER (0..2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION	"The ID of the access port where this SAP
+				is defined."
+   ::= { qosServiceSapEntry 1 }
+
+qosServiceSapEncapValue OBJECT-TYPE
+    SYNTAX          TQEncapVal
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION     "The value of the label used to identify this
+                     SAP on the access port specified by sapPortId."
+    ::= { qosServiceSapEntry 2 }
+    
+qosServiceSapRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION	 "This object indicates the status of this row. The
+	values supported during a set operation are createAndGo(4) 
+	active(1), notInService(2) and destroy(6).
+	Creation or deletion of an entry in this table means enable or disable
+	of QoS configuration on a specific SAP entry."
+    ::= { qosServiceSapEntry 3 }  
+    
+qosServiceSapPolicyEnable OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The object enables or disables QoS configuration on a specific SAP entry for the service."
+   ::= { qosServiceSapEntry 4 }
+   
+--
+-- QoS Interface Table.
+--
+
+qosInterfaceTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF QoSInterfaceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table will be responsible for managing QoS interface configuration"
+   ::= { qosInterfaceObjects 1 }
+
+qosInterfaceEntry OBJECT-TYPE
+   SYNTAX        QoSInterfaceEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table will be responsible for managing QoS configuration on an 
+       interface."
+   INDEX       { qosInterfaceIndex}
+      ::= { qosInterfaceTable 1 }
+
+QoSInterfaceEntry ::= SEQUENCE {
+	qosInterfaceIndex					InterfaceIndexOrZero,
+	qosInterfaceRowStatus        		RowStatus,
+	qosInterfacePolicy             		TNamedItem
+}
+
+qosInterfaceIndex OBJECT-TYPE
+   SYNTAX        InterfaceIndexOrZero
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This is a unique index for an entry in the
+        qosInterfaceTable."
+   REFERENCE
+       "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+        and F. Kastenholtz, June 2000"
+   ::= { qosInterfaceEntry 1 }
+
+qosInterfaceRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { qosInterfaceEntry 2 }  
+    
+qosInterfacePolicy OBJECT-TYPE
+   SYNTAX        TNamedItem
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "Network QoS Policy Id to be applied on a port."
+   ::= { qosInterfaceEntry 3 }
+
+--
+-- QoS Statistics Table.
+--
+ 
+qosStatisticsTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QoSStatisticsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This table displays QoS statistics information based on port and queue."
+    ::= { qosStatisticsObjects 1 }
+
+qosStatisticsEntry OBJECT-TYPE
+    SYNTAX       QoSStatisticsEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+       "This table is responsible for displaying common QoS statistics on an 
+       interface and/or queue."
+    INDEX { qosStatInterfaceIndex,  qosQueueIndex}
+    ::= { qosStatisticsTable 1 }
+
+ QoSStatisticsEntry ::= SEQUENCE
+ 	{
+		qosStatInterfaceIndex				InterfaceIndexOrZero,
+		qosQueueIndex        				TQueueId,
+		qosReceivedBytes             		Counter32,
+		qosDroppedBytes             		Counter32,
+		qosClearStatistics					TruthValue
+	}
+  
+qosStatInterfaceIndex  OBJECT-TYPE
+	SYNTAX       InterfaceIndexOrZero
+	MAX-ACCESS    not-accessible
+	STATUS       current
+	DESCRIPTION
+       "This is a unique index for an entry in the
+        qosStatisticsTable."
+   REFERENCE
+       "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+        and F. Kastenholtz, June 2000"
+    ::= { qosStatisticsEntry 1 }   
+
+qosQueueIndex  OBJECT-TYPE
+    SYNTAX       TQueueId
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "This is a unique index for an entry in the
+        qosStatisticsTable."
+    ::= { qosStatisticsEntry 2 }
+
+qosReceivedBytes  OBJECT-TYPE
+   SYNTAX        Counter32
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "Received bytes on the port/queue."
+    ::= { qosStatisticsEntry 3 }   
+
+qosDroppedBytes  OBJECT-TYPE
+    SYNTAX       Counter32
+    MAX-ACCESS   read-only
+    STATUS       current
+   DESCRIPTION
+       "Dropped bytes on the port/queue."
+    ::= { qosStatisticsEntry 4 }
+
+qosClearStatistics  OBJECT-TYPE
+    SYNTAX       TruthValue
+    MAX-ACCESS   read-create
+	STATUS       current
+	DESCRIPTION
+		"Clear statistics.Set to true to clear the statistics"
+    DEFVAL { false }
+    ::= { qosStatisticsEntry 5 }
+           
+--
+-- qos vlan policy table
+--
+
+qosVlanPolicyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosVlanPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "Qos VLAN policy table. Keeps comman information for the QoS VLAN policy "
+    ::= { qosVlanPolicyObjects 1 }
+
+qosVlanPolicyEntry OBJECT-TYPE
+    SYNTAX       QosVlanPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular QoS VLAN Policy.
+        "
+    INDEX { qosVlanPolicy }
+    ::= { qosVlanPolicyTable 1 }
+
+QosVlanPolicyEntry ::= SEQUENCE
+    {
+        qosVlanPolicy						TNamedItem,
+        qosVlanPolicyDescription				TItemDescription,
+	qosVlanPolicyRowStatus					RowStatus
+    }
+
+qosVlanPolicy  OBJECT-TYPE
+    SYNTAX       TNamedItem
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION  "QoS VLAN policy index. String up to 6 characters"
+    REFERENCE ""
+    ::= { qosVlanPolicyEntry 1 }
+
+qosVlanPolicyDescription  OBJECT-TYPE
+    SYNTAX       TItemDescription
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION "User-defined description of the QoS VLAN policy"
+    DEFVAL { ''H }
+    ::= { qosVlanPolicyEntry 2 }
+
+qosVlanPolicyRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION "Row status of the QoS network policy.
+    			 QoS VLAN policy is created with createAndWait(5)."
+    ::= { qosVlanPolicyEntry 3 }
+  
+--
+-- vlan ingress policy table
+--
+
+qosVlanIngressPolicyTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosVlanIngressPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about all QoS VLAN ingress policies' configuration."
+    ::= { qosVlanPolicyObjects 2 }
+
+qosVlanIngressPolicyEntry OBJECT-TYPE
+    SYNTAX       QosVlanIngressPolicyEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular VLAN policy's ingress
+         per-forwarding-class traffic disposition.
+
+         Entries are created/deleted as an action of creating/deleting
+         a row in the qosVlanIngressTable.
+        "
+    INDEX { qosVlanPolicy}
+    ::= { qosVlanIngressPolicyTable 1 }
+
+    
+QosVlanIngressPolicyEntry ::= SEQUENCE
+    {           
+        qosVlanPolicyShaperProfile					TShaperId,
+        qosVlanPolicySchedulingProfile					TSSchedulingProfile,
+        qosVlanPolicyTailDropProfile					TTailDropId
+    }
+ 
+qosVlanPolicyShaperProfile  OBJECT-TYPE
+    SYNTAX       TShaperId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Shaper profile ID. Valid shaper profile Id range is 9-57.
+        To remove the shaper profile use ID 0"
+    ::= { qosVlanIngressPolicyEntry 1 }
+
+qosVlanPolicySchedulingProfile  OBJECT-TYPE
+    SYNTAX       TSSchedulingProfile
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Scheduling profile ID. Valid scheduling profile Id range
+        is 1-8. To remove the scheduling profile use ID 0"
+    ::= { qosVlanIngressPolicyEntry 2 } 
+    
+qosVlanPolicyTailDropProfile  OBJECT-TYPE
+    SYNTAX       TTailDropId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The ID of a Tail drop profile configured. Valid tail-drop profile Id range
+        is 1-5. To remove the scheduling profile use ID 0"
+    ::= { qosVlanIngressPolicyEntry 3 } 
+
+--
+-- vlans ingress queue table
+--
+
+qosVlanIngressQueueTable OBJECT-TYPE
+    SYNTAX       SEQUENCE OF QosVlanIngressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about all QoS VLAN ingress policies' configuration."
+    ::= { qosVlanPolicyObjects 3 }
+
+qosVlanIngressQueueEntry OBJECT-TYPE
+    SYNTAX       QosVlanIngressQueueEntry
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Information about a particular VLAN policy's ingress
+         per-forwarding-class traffic disposition.
+
+         Entries are created/deleted as an action of creating/deleting
+         a row in the qosVlanIngressTable.
+        "
+    INDEX { qosVlanPolicy}
+    ::= { qosVlanIngressQueueTable 1 }
+
+    
+QosVlanIngressQueueEntry ::= SEQUENCE
+    {                                 
+        qosVlanInQueueQueue            		TQueueId,
+	qosVlanInQueueShaperProfile		TShaperId,
+        qosVlanInQueueTailDropProfile		TTailDropId,
+        qosVlanInQueueRowStatus        		RowStatus
+    }
+
+qosVlanInQueueQueue  OBJECT-TYPE
+    SYNTAX       TQueueId (1..8)
+    MAX-ACCESS   not-accessible
+    STATUS       current
+    DESCRIPTION
+        "Service queue identifier.
+        The queue ID is used as an index of the table entry."
+    ::= { qosVlanIngressQueueEntry 1 }
+
+    qosVlanInQueueShaperProfile  OBJECT-TYPE
+    SYNTAX       TShaperId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "Shaper profile ID. Valid shaper profile Id range is 9-57.
+        To remove the shaper profile use ID 0"
+    ::= { qosVlanIngressQueueEntry 2 } 
+
+qosVlanInQueueTailDropProfile  OBJECT-TYPE
+    SYNTAX       TTailDropId
+    MAX-ACCESS   read-write
+    STATUS       current
+    DESCRIPTION
+        "The ID of a Tail drop profile configured. Valid tail-drop profile Id range
+        is 1-5. To remove the scheduling profile use ID 0"
+    ::= { qosVlanIngressQueueEntry 3 } 
+
+qosVlanInQueueRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION
+        "Row Status of the entry. This allows creation/deletion of rows in this
+         table."
+    ::= { qosVlanIngressQueueEntry 4 }
+
+
+
+--
+-- QoS VLAN Table.
+--
+
+qosVlanTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF QosVlanEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table will be responsible for managing QoS VLAN configuration"
+   ::= { qosVlanObjects 1 }
+
+qosVlanEntry OBJECT-TYPE
+   SYNTAX        QosVlanEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table will be responsible for managing QoS configuration on a VLAN."
+   INDEX       { qosVlanIndex}
+      ::= { qosVlanTable 1 }
+
+QosVlanEntry ::= SEQUENCE {
+	qosVlanIndex				Integer32,
+	qosVlanPolicyOnVlan        		TNamedItem,
+	qosVlanRowStatus        		RowStatus
+}
+
+qosVlanIndex OBJECT-TYPE
+   SYNTAX        Integer32 (0..2147483647)
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This is a unique index for an entry in the
+        qosVlanTable."
+   REFERENCE
+       "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+        and F. Kastenholtz, June 2000"
+   ::= { qosVlanEntry 1 }
+
+qosVlanPolicyOnVlan OBJECT-TYPE
+   SYNTAX        TNamedItem
+   MAX-ACCESS    read-create
+   STATUS        current
+   DESCRIPTION
+       "VLAN QoS Policy Id to be applied on a VLAN."
+   ::= { qosVlanEntry 2 }
+
+qosVlanRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION	 "This object indicates the status of this row. The
+	values supported during a set operation are createAndGo(4) 
+	active(1), notInService(2) and destroy(6).
+	Creation or deletion of an entry in this table means enable or removal
+	of QoS policy on a specific VLAN entry."
+    ::= { qosVlanEntry 3 } 
+
+--
+-- QoS VLAN ingress Table.
+--
+
+qosVlanIngressPortTable  OBJECT-TYPE
+   SYNTAX        SEQUENCE OF QosVlanIngressPortEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION	"A table that contains QoS VLAN Ingress Port information."
+   ::= { qosVlanObjects 2 }
+
+qosVlanIngressPortEntry OBJECT-TYPE
+   SYNTAX        QosVlanIngressPortEntry
+   MAX-ACCESS    not-accessible
+   STATUS        current
+   DESCRIPTION
+       "This table will be responsible for managing QoS configuration on a SAP."
+   INDEX       { qosVlanIndex, qosVlanIngressPortId}
+      ::= { qosVlanIngressPortTable 1 }
+
+QosVlanIngressPortEntry ::= SEQUENCE {
+	qosVlanIngressPortId			INTEGER,
+	qosVlanPortPolicyEnable          	TruthValue,
+	qosVlanPortRowStatus        		RowStatus
+}
+   
+qosVlanIngressPortId OBJECT-TYPE
+   SYNTAX        INTEGER (0..2147483647)
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION	"The ID of the access port where thingress port for given VLAN."
+   ::= { qosVlanIngressPortEntry 1 }
+
+qosVlanPortPolicyEnable OBJECT-TYPE
+   SYNTAX        TruthValue
+   MAX-ACCESS    read-only
+   STATUS        current
+   DESCRIPTION
+       "The object enables or disables QoS configuration on a specific VLAN port."
+   ::= { qosVlanIngressPortEntry 2 }
+    
+qosVlanPortRowStatus  OBJECT-TYPE
+    SYNTAX       RowStatus
+    MAX-ACCESS   read-create
+    STATUS       current
+    DESCRIPTION	 "This object indicates the status of this row. The
+	values supported during a set operation are createAndGo(4) 
+	active(1), notInService(2) and destroy(6).
+	Creation or deletion of an entry in this table means enable or disable
+	of QoS configuration on a specific VLAN port."
+    ::= { qosVlanIngressPortEntry 3 }  
+           
+  END
diff --git a/MIBS/telco-systems/binos/PRVT-RESILIENT-LINK-MIB b/MIBS/telco-systems/binos/PRVT-RESILIENT-LINK-MIB
new file mode 100644
index 0000000..e77fc1a
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-RESILIENT-LINK-MIB
@@ -0,0 +1,251 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   PRVT-RESILIENT-LINK-MIB.mib
+-- ** Project:    T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+PRVT-RESILIENT-LINK-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, 
+        NOTIFICATION-TYPE			      FROM SNMPv2-SMI
+        NOTIFICATION-GROUP                FROM SNMPv2-CONF
+        switch                            FROM PRVT-SWITCH-MIB;
+    -------------------------------------------------------------------------------
+    --     PRIVATE BRANCH  PRODUCTS
+    -------------------------------------------------------------------------------
+
+
+    prvtResilientLinkMib MODULE-IDENTITY
+        LAST-UPDATED "200502160000Z"
+        ORGANIZATION "BATM Advanced Communication"
+        CONTACT-INFO   
+
+        "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+        DESCRIPTION
+        "The Resilient Link MIB module for managing switch or ipSwitch 
+         resilient link"
+
+        -- revision history       
+         REVISION     "200502160000Z"
+     	 DESCRIPTION
+		"Fixed spelling errors and changed the contact info." 
+
+		REVISION     "200305060000Z"
+		DESCRIPTION
+						"Move to SMI-V2."
+
+        REVISION     "200201280000Z"
+        DESCRIPTION
+                "Initial version."
+        ::= { switch 102 }
+
+
+    -- -----------------------------------------------------------------------------
+    -- resilient link configuration parameters
+    -- -----------------------------------------------------------------------------
+    prvtResilientLinkNotifications  OBJECT IDENTIFIER ::= { prvtResilientLinkMib 0 }
+    resilientLinkConfig OBJECT IDENTIFIER ::= { prvtResilientLinkMib 1 }
+    resilientLinkStatus             OBJECT IDENTIFIER ::= { prvtResilientLinkMib 2 }
+    prvtResilientLinkConformance    OBJECT IDENTIFIER ::= { prvtResilientLinkMib 3 }
+    
+    resilientLinkConfigTable OBJECT-TYPE
+        SYNTAX  SEQUENCE OF ResilientLinkConfigEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+            "This table contains the resilient link configuration."
+		::= { resilientLinkConfig 1 }
+
+    resilientLinkConfigEntry 	OBJECT-TYPE
+		SYNTAX	ResilientLinkConfigEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+		    "resilientLinkIndex"
+        INDEX { resilientLinkIndex }
+		::= { resilientLinkConfigTable 1 }
+
+    ResilientLinkConfigEntry ::= SEQUENCE {
+        resilientLinkIndex         INTEGER,
+        resilientLinkEnable        INTEGER,
+        resilientLinkPort1ifIndex  INTEGER,
+        resilientLinkPort2ifIndex  INTEGER,
+        resilientLinkPreferredPort INTEGER,
+        resilientLinkActivePort    INTEGER
+    }
+
+    resilientLinkIndex OBJECT-TYPE
+        SYNTAX  INTEGER(0..256)
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION            
+		    "This object identifies the resilient link" 
+		::= { resilientLinkConfigEntry 1 }
+    
+	resilientLinkEnable OBJECT-TYPE
+        SYNTAX  INTEGER	{
+                    enable(1),
+                    disable(2)
+                }
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This object enables or disables the resilient link"
+		::= { resilientLinkConfigEntry 2 }
+		
+	resilientLinkPort1ifIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        	MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This object identifies the first port belonging to this
+             resilient link; zero means no port is selected"
+		::= { resilientLinkConfigEntry 3 }
+		
+	resilientLinkPort2ifIndex OBJECT-TYPE
+        SYNTAX  INTEGER
+        	MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This object identifies the second port belonging to this
+             resilient link; zero means no port is selected"
+		::= { resilientLinkConfigEntry 4 }
+
+	resilientLinkPreferredPort OBJECT-TYPE
+        SYNTAX  INTEGER
+        	MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This object identifies the preferred port (1 or 2) in this
+             resilient link; zero means no port is preferred"
+		::= { resilientLinkConfigEntry 5 }
+		
+	resilientLinkActivePort OBJECT-TYPE
+        SYNTAX  INTEGER
+        	MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+            "This object identifies the active port (1 or 2) in this
+             resilient link. Only ports with link up can be configured as active 
+             ports."
+		::= { resilientLinkConfigEntry 6 }
+
+    -- -----------------------------------------------------------------------------
+    -- resilient link status
+    -- -----------------------------------------------------------------------------
+
+    resilientLinkStatusTable 	OBJECT-TYPE
+        SYNTAX  SEQUENCE OF ResilientLinkStatusEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+            "This table contains the resilient link status."
+		::= { resilientLinkStatus 2 }
+
+    resilientLinkStatusEntry 	OBJECT-TYPE
+		SYNTAX	ResilientLinkStatusEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+		    "resilientLinkIndex"
+        INDEX { resilientLinkIndex }
+		::= { resilientLinkStatusTable 1 }
+
+    ResilientLinkStatusEntry ::= SEQUENCE {
+        resilientLinkConnectedPort     INTEGER,
+        resilientLinkCurrentActivePort INTEGER
+    }
+
+	resilientLinkConnectedPort OBJECT-TYPE
+        SYNTAX  INTEGER	{
+                    notConnected(1),
+                    port1Connected(2),
+                    port2Connected(3),
+                    port1and2Connected(4)
+                }
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+            "This object shows the connected ports in the resilient link"
+		::= { resilientLinkStatusEntry 1 }
+
+	resilientLinkCurrentActivePort OBJECT-TYPE
+        SYNTAX  INTEGER {
+        		noActivePort (1),
+        		port1Active (2),
+        		port2Active (3)
+        	}
+        MAX-ACCESS read-only
+		STATUS	current
+		DESCRIPTION
+            "This object identifies the active port (1 or 2) in this
+             resilient link. Only ports with link up can be configured as active 
+             ports."
+		::= { resilientLinkStatusEntry 2 }
+     
+     -- Traps for use by prvtResilientLinkMib
+
+     resilientLinkStatusChange NOTIFICATION-TYPE
+         OBJECTS { resilientLinkIndex, resilientLinkConnectedPort,
+                     resilientLinkCurrentActivePort}
+	 STATUS current
+         DESCRIPTION
+                 "The resilientLinkStatusChange trap indicates that 
+                 the sending agent monitor detected a change in the status of the
+                 resilient link, identified by resilientLinkIndex."
+         ::= {prvtResilientLinkNotifications 1}
+
+-- *******************************************************************
+--  Conformance Information
+-- *******************************************************************
+
+    prvtResilientLinkMIBGroups       OBJECT IDENTIFIER ::= { prvtResilientLinkConformance 2 }
+ 
+    resilientLinkNotificationGroup NOTIFICATION-GROUP
+    	NOTIFICATIONS {
+    		resilientLinkStatusChange
+    	}
+	STATUS current
+     	DESCRIPTION
+        	"Private Notification Group."
+     ::= { prvtResilientLinkMIBGroups 3 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-RING-EPS-MIB b/MIBS/telco-systems/binos/PRVT-RING-EPS-MIB
new file mode 100644
index 0000000..143ed09
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-RING-EPS-MIB
@@ -0,0 +1,1272 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-RING-EPS-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-RING-EPS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE,
+    Unsigned32, NOTIFICATION-TYPE
+        FROM SNMPv2-SMI                  -- RFC2578
+    TEXTUAL-CONVENTION, RowStatus, MacAddress, TruthValue, DisplayString
+        FROM SNMPv2-TC                   -- RFC2579
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                 -- [RFC2580]
+    InterfaceIndexOrZero
+        FROM IF-MIB                      -- [RFC2863]
+    VlanIdOrNone
+        FROM Q-BRIDGE-MIB                -- [RFC4363]
+    Dot1agCfmMDLevelOrNone, Dot1agCfmMepIdOrZero
+        FROM IEEE8021-CFM-MIB
+    switch
+ 	FROM PRVT-SWITCH-MIB;
+
+prvtRingEpsMib MODULE-IDENTITY
+LAST-UPDATED "201003160000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This private MIB provides capability of controlling the
+ automatic Ring Ethernet Protection Switching (ITU-T G.8032)"
+
+-- revision history
+	REVISION "201302220000Z"
+    DESCRIPTION
+    "Added raps monitoring methods for rings and subrings"
+    REVISION "201103110000Z"
+    DESCRIPTION
+    "Added ring ID for rings and subrings"
+    REVISION "201012170000Z"
+    DESCRIPTION
+    "Added descriptions for rings and subrings"
+    REVISION "201003160000Z"
+    DESCRIPTION
+    "Added support for subrings"
+	REVISION "201002020000Z"
+	DESCRIPTION
+	"Added prvtRingEpsWaitToBlockTimer, changed values order for PrvtRingEpsPortStatusType "
+	REVISION       "200911040000Z"
+	DESCRIPTION
+	"Initial version."
+
+::= { switch 134 }
+
+-- ***********************************************
+-- ************ Top level structure of the MIB****
+-- ***********************************************
+prvtRingEpsNotifications              OBJECT IDENTIFIER ::= { prvtRingEpsMib 0 }
+prvtRingEpsObjects                    OBJECT IDENTIFIER ::= { prvtRingEpsMib 1 }
+prvtRingEpsConformance                OBJECT IDENTIFIER ::= { prvtRingEpsMib 2 }
+
+prvtRingEpsInstances OBJECT IDENTIFIER ::= { prvtRingEpsObjects 1 }
+prvtRingEpsVlans     OBJECT IDENTIFIER ::= { prvtRingEpsObjects 2 }
+prvtRingEpsSubRings  OBJECT IDENTIFIER ::= { prvtRingEpsObjects 3 }
+
+PrvtRingEpsModeType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Version of the protocol the instance will use"
+    REFERENCE
+       "G.8032v2 clause 10.1.13"
+    SYNTAX      INTEGER {
+                  rapsMode8032v1      (1),
+                  rapsMode8032v2      (2)
+                }
+
+PrvtRingEpsStateType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "State of the R-APS request processing logic"
+    REFERENCE
+       "G.8032v2 clause 10.1.2"
+    SYNTAX      INTEGER {
+                  rapsInit            (0),
+                  rapsIdle            (1),
+                  rapsProtection      (2),
+                  rapsManualSwitch    (3),
+                  rapsForcedSwitch    (4),
+                  rapsPending         (5)
+                }
+
+PrvtRingEpsLocalCommandType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Local system state given by the top priority command received"
+    REFERENCE
+       "G.8032v2 clause 8"
+    SYNTAX      INTEGER {
+                  rapsLcNoRequest                  (0),
+                  rapsLcExercise                   (1),
+                  rapsLcManualSwitch               (2),
+                  rapsLcSignalDegrade              (3),
+                  rapsLcSignalFail                 (4),
+                  rapsLcForcedSwitch               (5),
+                  rapsLcClear                      (6),
+                  rapsLcLockoutOfProtection        (7)
+                }
+
+PrvtRingEpsRemoteRequestType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Remote command received via RAPS packets"
+    REFERENCE
+       "G.8032v2 clause 10.3"
+    SYNTAX      INTEGER {
+                  rapsRsNone                       (-1),
+                  rapsRsNoRequest                  (0),
+                  rapsRsManualSwitch               (7),
+                  rapsRsSignalFail                 (11),
+                  rapsRsForcedSwitch               (13),
+                  rapsRsEvent                      (14)
+                }
+
+PrvtRingEpsNodeRoleType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Role of the defined node inside the protected ring"
+    REFERENCE
+       "G.8032v2"
+    SYNTAX      INTEGER {
+                  rapsNrSimpleNode             (0),
+                  rapsNrRplNeighborNode        (1),
+                  rapsNrRplOwner               (2)
+                }
+
+PrvtRingEpsRplPortType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Ring port designated as RPL
+       (only valid if prvtRingEpsNodeRole is rapsNrRplOwner or rapsNrRplNeighborNode"
+    REFERENCE
+       "G.8032v2"
+    SYNTAX      INTEGER {
+                  port0    (0),
+                  port1    (1),
+                  none     (2)
+                }
+
+PrvtRingEpsDefectType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Ring port designated as RPL
+       (only valid if prvtRingEpsNodeRole is rapsNrRplOwner or rapsNrRplNeighborNode"
+    REFERENCE
+       "G.8032v2 10.4"
+    SYNTAX      BITS {
+                  rapsDprovisioningMismatch    (0)
+                }
+
+PrvtRingEpsPortStatusType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Status of the port link"
+    SYNTAX      INTEGER {
+		        rapsPsOk        (0),
+                rapsPsBlocked   (1),
+                rapsPsFailed    (2)
+
+                }
+
+PrvtRingEpsPeerStatusType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION
+       "Status bits set in the received RAPS packet. The meanings are:
+
+        bRplBlocked(0) The RPL link is blocked by the RPL owner.
+        bDoNotFlush(1) RAPS sender requests that we do don flush our FDB.
+        bBlockedPortReference(2) The port that is blocked by the sender of the RAPS packet.
+       "
+    REFERENCE
+       "ITU-T G.8032v2 clause 10.3"
+    SYNTAX BITS {
+                bRplBlocked(0),
+                bDoNotFlush(1),
+                bBlockedPortReference(2)
+                }
+
+
+-- ***********************************************
+--      Table definitions
+-- ***********************************************
+prvtRingEpsInstanceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtRingEpsInstanceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+    "This table includes information about the ring instances
+     defined on this node."
+    ::= { prvtRingEpsInstances 1 }
+
+prvtRingEpsInstanceEntry OBJECT-TYPE
+	SYNTAX PrvtRingEpsInstanceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"NONE"
+	INDEX  { prvtRingEpsInstanceIndex }
+	::= { prvtRingEpsInstanceTable 1 }
+
+PrvtRingEpsInstanceEntry  ::= SEQUENCE {
+    prvtRingEpsInstanceIndex         Unsigned32,
+    prvtRingEpsMode                  PrvtRingEpsModeType,
+    prvtRingEpsNodeRole              PrvtRingEpsNodeRoleType,
+    prvtRingEpsState                 PrvtRingEpsStateType,
+	prvtRingEpsLocalCommand          PrvtRingEpsLocalCommandType,
+    prvtRingEpsControlVlan           VlanIdOrNone,
+    prvtRingEpsPort0Ifindex          InterfaceIndexOrZero,
+    prvtRingEpsPort1Ifindex          InterfaceIndexOrZero,
+    prvtRingEpsRplPort               PrvtRingEpsRplPortType,
+    prvtRingEpsManualSwitchPort      PrvtRingEpsRplPortType,
+    prvtRingEpsCfmMdLevel            Dot1agCfmMDLevelOrNone,
+    prvtRingEpsPort0Mep              Dot1agCfmMepIdOrZero,
+    prvtRingEpsPort1Mep              Dot1agCfmMepIdOrZero,
+	prvtRingEpsRevertive             TruthValue,
+	prvtRingEpsNoVirtualChannel      TruthValue,
+	prvtRingEpsHoldOffTimer          Unsigned32,
+	prvtRingEpsWaitToRestoreTimer    Unsigned32,
+	prvtRingEpsGuardTimer            Unsigned32,
+	prvtRingEpsWaitToBlockTimer      Unsigned32,
+	prvtRingEpsDefectFop             PrvtRingEpsDefectType,
+	prvtRingEpsPort0Status           PrvtRingEpsPortStatusType,
+	prvtRingEpsPort1Status           PrvtRingEpsPortStatusType,
+	prvtRingEpsPort0PeerNodeId       MacAddress,
+	prvtRingEpsPort1PeerNodeId	 	 MacAddress,
+	prvtRingEpsPort0PeerCommand 	 PrvtRingEpsRemoteRequestType,
+	prvtRingEpsPort1PeerCommand		 PrvtRingEpsRemoteRequestType,
+	prvtRingEpsPort0PeerStatus		 PrvtRingEpsPeerStatusType,
+	prvtRingEpsPort1PeerStatus 		 PrvtRingEpsPeerStatusType,
+	prvtRingEpsOperationalStatus     TruthValue,
+	prvtRingEpsAdminStatus           TruthValue,
+    prvtRingEpsRowStatus             RowStatus,
+    prvtRingEpsForcedSwitchPort      PrvtRingEpsRplPortType,
+    prvtRingEpsInstanceDescription   DisplayString,
+    prvtRingEpsRingId                Unsigned32,
+	prvtRingEpsPort0MonitoringMethod INTEGER,
+	prvtRingEpsPort1MonitoringMethod INTEGER
+    }
+
+prvtRingEpsInstanceIndex OBJECT-TYPE
+	SYNTAX          Unsigned32 (1..10)
+	MAX-ACCESS      not-accessible
+	STATUS          current
+	DESCRIPTION	    "RAPS instance index"
+	::= { prvtRingEpsInstanceEntry 1 }
+
+prvtRingEpsMode OBJECT-TYPE
+	SYNTAX          PrvtRingEpsModeType
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION	    "Version of the protocol the instance will use"
+	DEFVAL          {rapsMode8032v2}
+	::= { prvtRingEpsInstanceEntry 2 }
+
+prvtRingEpsNodeRole OBJECT-TYPE
+	SYNTAX          PrvtRingEpsNodeRoleType
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION
+    "This variable identifies the role that the node will play inside the ring.
+     The node can have two special roles, RPL owner or RPL neighbor, when one
+     of its ports is designated as RPL. The ring can have a single RPL owner
+     and a single RPL neighbor, connected between eachother via the RPL.
+     If neither of the node ports are designated as RPL, then the node should
+     have the role of a Simple node"
+	DEFVAL          {rapsNrSimpleNode}
+	::= { prvtRingEpsInstanceEntry 3 }
+
+prvtRingEpsState OBJECT-TYPE
+	SYNTAX          PrvtRingEpsStateType
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable identifies the state of the ring node according to
+     the standard state machine."
+	DEFVAL          {rapsInit}
+	::= { prvtRingEpsInstanceEntry 4 }
+
+prvtRingEpsLocalCommand OBJECT-TYPE
+	SYNTAX          PrvtRingEpsLocalCommandType
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION
+    "The user can control the ring using a set of commands allowing
+     blocking and unblocking of ports. These commands are rapsLcManualSwitch,
+     rapsLcForcedSwitch and rapsLcClear. The others are either read-only values
+     or not yet defined by the standard."
+	DEFVAL          {rapsLcNoRequest}
+	::= { prvtRingEpsInstanceEntry 5 }
+
+prvtRingEpsControlVlan OBJECT-TYPE
+    SYNTAX          VlanIdOrNone
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "The vlan ID used for RAPS & CFM traffic."
+    DEFVAL          {0}
+    ::= { prvtRingEpsInstanceEntry 6 }
+
+prvtRingEpsPort0Ifindex OBJECT-TYPE
+	SYNTAX          InterfaceIndexOrZero
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION
+    "This variable is the interface index of the interface either a
+    bridge port, or an aggregated IEEE 802.1 link within a bridge
+    port, attached to the ring as port 0."
+	DEFVAL          {0}
+	::= { prvtRingEpsInstanceEntry 7 }
+
+prvtRingEpsPort1Ifindex OBJECT-TYPE
+	SYNTAX          InterfaceIndexOrZero
+	MAX-ACCESS      read-create
+	STATUS          current
+    DESCRIPTION
+    "This variable is the interface index of the interface either a
+    bridge port, or an aggregated IEEE 802.1 link within a bridge
+    port, attached to the ring as port 1."
+	DEFVAL          {0}
+	::= { prvtRingEpsInstanceEntry 8 }
+
+prvtRingEpsRplPort OBJECT-TYPE
+	SYNTAX          PrvtRingEpsRplPortType
+	MAX-ACCESS      read-create
+	STATUS          current
+    DESCRIPTION
+    "This object controls whether the one of the ring ports is designated as RPL
+     for the ring or not."
+	DEFVAL          {none}
+	::= { prvtRingEpsInstanceEntry 9 }
+
+prvtRingEpsManualSwitchPort OBJECT-TYPE
+	SYNTAX          PrvtRingEpsRplPortType
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION	    "The port blocked by the Manual Switch command"
+	DEFVAL          {none}
+	::= { prvtRingEpsInstanceEntry 10 }
+
+prvtRingEpsCfmMdLevel OBJECT-TYPE
+	SYNTAX          Dot1agCfmMDLevelOrNone
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION
+	"Value of the CFM MD level where the protected domain is situated"
+	DEFVAL          {-1}
+	::= { prvtRingEpsInstanceEntry 11 }
+
+prvtRingEpsPort0Mep OBJECT-TYPE
+	SYNTAX          Dot1agCfmMepIdOrZero
+	MAX-ACCESS      read-create
+	STATUS          current
+    DESCRIPTION
+    "This variable is the peer MEP ID that should send CCMs towards port 0."
+	DEFVAL          {0}
+	::= { prvtRingEpsInstanceEntry 12 }
+
+prvtRingEpsPort1Mep OBJECT-TYPE
+	SYNTAX          Dot1agCfmMepIdOrZero
+	MAX-ACCESS      read-create
+	STATUS          current
+    DESCRIPTION
+    "This variable is the peer MEP ID that should send CCMs towards port 1."
+	DEFVAL          {0}
+	::= { prvtRingEpsInstanceEntry 13 }
+
+prvtRingEpsRevertive OBJECT-TYPE
+	SYNTAX          TruthValue
+	MAX-ACCESS      read-create
+	STATUS          current
+    DESCRIPTION
+    "This is the MI_RAPS_Revertive variable defined in the standard.
+     It controls whether the RPL is blocked again after a failure of
+     some ring link recovers."
+    REFERENCE       "G.8032v2 clause 9.1"
+	DEFVAL          {true}
+	::= { prvtRingEpsInstanceEntry 14 }
+
+prvtRingEpsNoVirtualChannel OBJECT-TYPE
+	SYNTAX          TruthValue
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION	    "Node is part of a subring that doesn't use RAPS virtual channel"
+	REFERENCE       "G.8032v2 10.1.14"
+	DEFVAL          {false}
+	::= { prvtRingEpsInstanceEntry 15 }
+
+prvtRingEpsHoldOffTimer OBJECT-TYPE
+	SYNTAX          Unsigned32 (0..10000)
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION	    "Range is from 0 to 10 seconds in 100msec intervals"
+	REFERENCE       "G.8032v2 clause 10.1.8"
+	DEFVAL          {0}
+	::= { prvtRingEpsInstanceEntry 16 }
+
+prvtRingEpsWaitToRestoreTimer OBJECT-TYPE
+	SYNTAX          Unsigned32 (1..12)
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION	    "Range is from 1 to 12 minutes"
+	REFERENCE       "G.8032v2 clause 10.1.4"
+	DEFVAL          {5}
+	::= { prvtRingEpsInstanceEntry 17 }
+
+prvtRingEpsGuardTimer OBJECT-TYPE
+	SYNTAX          Unsigned32 (10..2000)
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION	    "Range is from 10msec to 2 seconds in 10msec intervals"
+	REFERENCE       "G.8032v2 clause 10.1.5"
+	DEFVAL          {500}
+	::= { prvtRingEpsInstanceEntry 18 }
+
+prvtRingEpsWaitToBlockTimer OBJECT-TYPE
+	SYNTAX          Unsigned32 (5010..7000)
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "Range is from 5010msec to 7 seconds in 10msec intervals.
+     This time is actulally the Guard Timer + 5 seconds"
+	REFERENCE       "G.8032v2 clause 10.1.5"
+	DEFVAL          {5500}
+	::= { prvtRingEpsInstanceEntry 19 }
+
+prvtRingEpsDefectFop OBJECT-TYPE
+	SYNTAX          PrvtRingEpsDefectType
+	MAX-ACCESS      read-only
+	STATUS          current
+    DESCRIPTION
+    "So far only the situation when two or more RPL-owners are defined
+     in the ring is identified as a defect. This scenario is noticed when
+     the instance with the RPL-Owner role receives a RAPS packet with the
+     RB bit set in its status field from a different NodeID than its own."
+	REFERENCE       "G.8032v2 clause 10.4"
+	::= { prvtRingEpsInstanceEntry 20 }
+
+prvtRingEpsPort0Status OBJECT-TYPE
+	SYNTAX          PrvtRingEpsPortStatusType
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable reflects the state of port 0.
+     It can be either Ok (unblocked), Blocked or Failed."
+	DEFVAL          {rapsPsFailed}
+	::= { prvtRingEpsInstanceEntry 21 }
+
+prvtRingEpsPort1Status OBJECT-TYPE
+	SYNTAX          PrvtRingEpsPortStatusType
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable reflects the state of port 1.
+     It can be either Ok (unblocked), Blocked or Failed."
+	DEFVAL          {rapsPsFailed}
+	::= { prvtRingEpsInstanceEntry 22 }
+
+prvtRingEpsPort0PeerNodeId OBJECT-TYPE
+	SYNTAX          MacAddress
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable reflects the Node ID from the RAPS packet received
+     via port 0."
+	::= { prvtRingEpsInstanceEntry 23 }
+
+prvtRingEpsPort1PeerNodeId OBJECT-TYPE
+	SYNTAX          MacAddress
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable reflects the Node ID from the RAPS packet received
+     via port 1."
+	::= { prvtRingEpsInstanceEntry 24 }
+
+prvtRingEpsPort0PeerCommand OBJECT-TYPE
+	SYNTAX          PrvtRingEpsRemoteRequestType
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable reflects the Request/State of the RAPS packet received
+     via port 0."
+	DEFVAL          {rapsRsNone}
+	::= { prvtRingEpsInstanceEntry 25 }
+
+prvtRingEpsPort1PeerCommand OBJECT-TYPE
+	SYNTAX          PrvtRingEpsRemoteRequestType
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable reflects the Request/State of the RAPS packet received
+     via port 1."
+	DEFVAL          {rapsRsNone}
+	::= { prvtRingEpsInstanceEntry 26 }
+
+prvtRingEpsPort0PeerStatus OBJECT-TYPE
+	SYNTAX          PrvtRingEpsPeerStatusType
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable reflects the status field of the RAPS packet received
+     via port 0."
+	::= { prvtRingEpsInstanceEntry 27 }
+
+prvtRingEpsPort1PeerStatus OBJECT-TYPE
+	SYNTAX          PrvtRingEpsPeerStatusType
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "This variable reflects the status field of the RAPS packet received
+     via port 1."
+	::= { prvtRingEpsInstanceEntry 28 }
+
+prvtRingEpsOperationalStatus OBJECT-TYPE
+	SYNTAX          TruthValue
+	MAX-ACCESS      read-only
+	STATUS          current
+	DESCRIPTION
+    "The purpose of this status is to identify to the user whether
+     this instance is ready for running. The operational status can
+     be up or down. When creating the instance the operational
+     status will be down. Receiving CCMs from the expected peer MEPs on
+     both ring ports will bring the operational status to up. If any
+     needed CFM configuration is removed the operational status will
+     go back to down"
+	DEFVAL          {false}
+	::= { prvtRingEpsInstanceEntry 29 }
+
+prvtRingEpsAdminStatus OBJECT-TYPE
+	SYNTAX          TruthValue
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION	    "Administrative status of the instance"
+	DEFVAL          {false}
+	::= { prvtRingEpsInstanceEntry 30 }
+
+prvtRingEpsRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "The status of the row."
+    ::= { prvtRingEpsInstanceEntry 31 }
+
+prvtRingEpsForcedSwitchPort OBJECT-TYPE
+    SYNTAX          PrvtRingEpsRplPortType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "The port blocked by the Forced Switch command"
+    DEFVAL          {none}
+    ::= { prvtRingEpsInstanceEntry 32 }
+
+prvtRingEpsInstanceDescription OBJECT-TYPE
+    SYNTAX DisplayString
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION "RAPS instance description."
+::= { prvtRingEpsInstanceEntry 33 }
+
+prvtRingEpsRingId OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..255)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "The last octet of the RAPS destination MAC address
+     is designated as Ring ID (01-19-A7-00-00-[Ring ID]).
+     As of G.8032v2 the destination MAC address
+     '01-19-A7-00-00-01' is used. The usage of other
+     MAC addresses is for further study."
+    REFERENCE       "G.8032v2 Appendix VII"
+    DEFVAL          {1}
+    ::= { prvtRingEpsInstanceEntry 34 }
+	
+prvtRingEpsPort0MonitoringMethod  OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		ccm ( 1 ),
+		link-status( 2 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Raps monitoring methods for port 0: 
+    ccm - CCM messages and link status will be used for raps monitoring,
+    link-status -Link status will be used for raps monitoring"
+	DEFVAL { 1 }
+	::= { prvtRingEpsInstanceEntry 35 }	
+
+prvtRingEpsPort1MonitoringMethod  OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		ccm ( 1 ),
+		link-status( 2)
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Raps monitoring methods for port 1:
+	ccm - CCM messages and link status will be used for raps monitoring,
+    link-status - Link status will be used for raps monitoring"
+	DEFVAL { 1 }
+	::= { prvtRingEpsInstanceEntry 36 }		
+
+
+prvtRingEpsVlanTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtRingEpsVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+    "This table includes information about protected vlans and the ring
+     instances that monitor them."
+    ::= { prvtRingEpsVlans 1 }
+
+prvtRingEpsVlanEntry OBJECT-TYPE
+	SYNTAX PrvtRingEpsVlanEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"Connection between vlan IDs and the RAPS instance that monitors them"
+	INDEX  { prvtRingEpsVlanIndex }
+	::= { prvtRingEpsVlanTable 1 }
+
+PrvtRingEpsVlanEntry  ::= SEQUENCE {
+    prvtRingEpsVlanIndex         Unsigned32,
+    prvtRingEpsInstance          Unsigned32,
+    prvtRingEpsVlanRowStatus     RowStatus
+    }
+
+prvtRingEpsVlanIndex OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..4094)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION     "The vlan ID."
+    ::= { prvtRingEpsVlanEntry 1 }
+
+prvtRingEpsInstance OBJECT-TYPE
+	SYNTAX          Unsigned32 (0..10)
+	MAX-ACCESS      read-create
+	STATUS          current
+	DESCRIPTION	    "RAPS instance that will monitor this vlan"
+	DEFVAL          { 0 }
+	::= { prvtRingEpsVlanEntry 2 }
+
+prvtRingEpsVlanRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "The status of the row."
+    ::= { prvtRingEpsVlanEntry 3 }
+
+
+
+
+
+
+
+
+prvtRingEpsSubRingTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtRingEpsSubRingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+    "Table containing information about the subring instances
+     defined on this node."
+    ::= { prvtRingEpsSubRings 1 }
+
+prvtRingEpsSubRingEntry OBJECT-TYPE
+    SYNTAX PrvtRingEpsSubRingEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+    "Configuration of a subring that is interconnected to the main ring in an interconnection node"
+    INDEX  { prvtRingEpsInstanceIndex, prvtRingEpsSubRingIndex }
+    ::= { prvtRingEpsSubRingTable 1 }
+
+PrvtRingEpsSubRingEntry  ::= SEQUENCE {
+    prvtRingEpsSubRingIndex                 Unsigned32,
+    prvtRingEpsSubRingNodeRole              PrvtRingEpsNodeRoleType,
+    prvtRingEpsSubRingState                 PrvtRingEpsStateType,
+    prvtRingEpsSubRingLocalCommand          PrvtRingEpsLocalCommandType,
+    prvtRingEpsSubRingPortIfindex           InterfaceIndexOrZero,
+    prvtRingEpsSubRingPortMep               Dot1agCfmMepIdOrZero,
+    prvtRingEpsSubRingRplPort               PrvtRingEpsRplPortType,
+    prvtRingEpsSubRingVirtualChannelVlan    VlanIdOrNone,
+    prvtRingEpsSubRingRevertive             TruthValue,
+    prvtRingEpsSubRingHoldOffTimer          Unsigned32,
+    prvtRingEpsSubRingWaitToRestoreTimer    Unsigned32,
+    prvtRingEpsSubRingGuardTimer            Unsigned32,
+    prvtRingEpsSubRingWaitToBlockTimer      Unsigned32,
+    prvtRingEpsSubRingDefectFop             PrvtRingEpsDefectType,
+    prvtRingEpsSubRingPortStatus            PrvtRingEpsPortStatusType,
+    prvtRingEpsSubRingPortPeerNodeId        MacAddress,
+    prvtRingEpsSubRingPeerCommand           PrvtRingEpsRemoteRequestType,
+    prvtRingEpsSubRingPeerStatus            PrvtRingEpsPeerStatusType,
+    prvtRingEpsSubRingVcPeerNodeId          MacAddress,
+    prvtRingEpsSubRingVcPeerCommand         PrvtRingEpsRemoteRequestType,
+    prvtRingEpsSubRingVcPeerStatus          PrvtRingEpsPeerStatusType,
+    prvtRingEpsSubRingPropagateTC           TruthValue,
+    prvtRingEpsSubRingOperationalStatus     TruthValue,
+    prvtRingEpsSubRingAdminStatus           TruthValue,
+    prvtRingEpsSubRingRowStatus             RowStatus,
+    prvtRingEpsSubRingControlVlan           VlanIdOrNone,
+    prvtRingEpsSubRingDescription           DisplayString,
+    prvtRingEpsSubRingRingId                Unsigned32,
+	prvtRingEpsSubRingMonitoringMethod      INTEGER
+    }
+
+prvtRingEpsSubRingIndex OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..10)
+    MAX-ACCESS      not-accessible
+    STATUS          current
+    DESCRIPTION     "A subring ID"
+    ::= { prvtRingEpsSubRingEntry 1 }
+
+prvtRingEpsSubRingNodeRole OBJECT-TYPE
+    SYNTAX          PrvtRingEpsNodeRoleType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "This variable identifies the role that the node will play inside the subring.
+     The node can have two special roles, RPL owner or RPL neighbor, when the
+     subring port is designated as RPL. The subring can have a single RPL owner
+     and a single RPL neighbor, connected between eachother via the RPL.
+     If the subring port is not designated as RPL, then the node should
+     have the role of a Simple node"
+    DEFVAL          {rapsNrSimpleNode}
+    ::= { prvtRingEpsSubRingEntry 2 }
+
+prvtRingEpsSubRingState OBJECT-TYPE
+    SYNTAX          PrvtRingEpsStateType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "This variable identifies the state of the subring node according to
+     the standard state machine."
+    REFERENCE       "G.8032v2 clause 10.1.2"
+    DEFVAL          {rapsInit}
+    ::= { prvtRingEpsSubRingEntry 3 }
+
+prvtRingEpsSubRingLocalCommand OBJECT-TYPE
+    SYNTAX          PrvtRingEpsLocalCommandType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "The user can control the ring using a set of commands allowing
+     blocking and unblocking of ports. These commands are rapsLcManualSwitch,
+     rapsLcForcedSwitch and rapsLcClear. The others are either read-only values
+     or not yet defined by the standard."
+    DEFVAL          {rapsLcNoRequest}
+    ::= { prvtRingEpsSubRingEntry 4 }
+
+prvtRingEpsSubRingPortIfindex OBJECT-TYPE
+    SYNTAX          InterfaceIndexOrZero
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "This variable is the interface index of the interface either a
+    bridge port, or an aggregated IEEE 802.1 link within a bridge
+    port, attached to the subring."
+    DEFVAL          {0}
+    ::= { prvtRingEpsSubRingEntry 5 }
+
+prvtRingEpsSubRingPortMep OBJECT-TYPE
+    SYNTAX          Dot1agCfmMepIdOrZero
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "This variable is the peer MEP ID that should send CCMs towards the subring port."
+    DEFVAL          {0}
+    ::= { prvtRingEpsSubRingEntry 6 }
+
+prvtRingEpsSubRingRplPort OBJECT-TYPE
+    SYNTAX          PrvtRingEpsRplPortType
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "This object controls whether the subring port is designated as RPL
+     for the subring or not."
+    DEFVAL          {none}
+    ::= { prvtRingEpsSubRingEntry 7 }
+
+prvtRingEpsSubRingVirtualChannelVlan OBJECT-TYPE
+    SYNTAX          VlanIdOrNone
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "The vlan ID used for Virtual Channel encapsulation"
+    DEFVAL          {0}
+    ::= { prvtRingEpsSubRingEntry 8 }
+
+prvtRingEpsSubRingRevertive OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "This is the MI_RAPS_Revertive variable defined in the standard.
+     It controls whether the RPL is blocked again after a failure of
+     some subring link recovers."
+    REFERENCE       "G.8032v2 clause 9.1"
+    DEFVAL          {true}
+    ::= { prvtRingEpsSubRingEntry 9 }
+
+prvtRingEpsSubRingHoldOffTimer OBJECT-TYPE
+    SYNTAX          Unsigned32 (0..10000)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "Range is from 0 to 10 seconds in 100msec intervals"
+    REFERENCE       "G.8032v2 clause 10.1.8"
+    DEFVAL          {0}
+    ::= { prvtRingEpsSubRingEntry 10 }
+
+prvtRingEpsSubRingWaitToRestoreTimer OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..12)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "Range is from 1 to 12 minutes"
+    REFERENCE       "G.8032v2 clause 10.1.4"
+    DEFVAL          {5}
+    ::= { prvtRingEpsSubRingEntry 11 }
+
+prvtRingEpsSubRingGuardTimer OBJECT-TYPE
+    SYNTAX          Unsigned32 (10..2000)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "Range is from 10msec to 2 seconds in 10msec intervals"
+    REFERENCE       "G.8032v2 clause 10.1.5"
+    DEFVAL          {500}
+    ::= { prvtRingEpsSubRingEntry 12 }
+
+prvtRingEpsSubRingWaitToBlockTimer OBJECT-TYPE
+    SYNTAX          Unsigned32 (5010..7000)
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "Range is from 5010msec to 7 seconds in 10msec intervals.
+     This time is actulally the Guard Timer + 5 seconds"
+    REFERENCE       "G.8032v2 clause 10.1.5"
+    DEFVAL          {5500}
+    ::= { prvtRingEpsSubRingEntry 13 }
+
+prvtRingEpsSubRingDefectFop OBJECT-TYPE
+    SYNTAX          PrvtRingEpsDefectType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "So far only the situation when two or more RPL-owners are defined
+     in the ring is identified as a defect. This scenario is noticed when
+     the instance with the RPL-Owner role receives a RAPS packet with the
+     RB bit set in its status field from a different NodeID than its own."
+    REFERENCE       "G.8032v2 clause 10.4"
+    ::= { prvtRingEpsSubRingEntry 14 }
+
+prvtRingEpsSubRingPortStatus OBJECT-TYPE
+    SYNTAX          PrvtRingEpsPortStatusType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "This variable reflects the state of the subring port.
+     It can be either Ok (unblocked), Blocked or Failed."
+    DEFVAL          {rapsPsFailed}
+    ::= { prvtRingEpsSubRingEntry 15 }
+
+prvtRingEpsSubRingPortPeerNodeId OBJECT-TYPE
+    SYNTAX          MacAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "This variable reflects the Node ID from the RAPS packet received
+     via the subring port."
+    ::= { prvtRingEpsSubRingEntry 16 }
+
+prvtRingEpsSubRingPeerCommand OBJECT-TYPE
+    SYNTAX          PrvtRingEpsRemoteRequestType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "This variable reflects the Request/State of the RAPS packet received
+     via the subring port."
+    DEFVAL          {rapsRsNone}
+    ::= { prvtRingEpsSubRingEntry 17 }
+
+prvtRingEpsSubRingPeerStatus OBJECT-TYPE
+    SYNTAX          PrvtRingEpsPeerStatusType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "This variable reflects the status field of the RAPS packet received
+     via the subring port."
+    ::= { prvtRingEpsSubRingEntry 18 }
+
+prvtRingEpsSubRingVcPeerNodeId OBJECT-TYPE
+    SYNTAX          MacAddress
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "This variable reflects the Node ID from the RAPS packet received
+     via the virtual channel."
+    ::= { prvtRingEpsSubRingEntry 19 }
+
+prvtRingEpsSubRingVcPeerCommand OBJECT-TYPE
+    SYNTAX          PrvtRingEpsRemoteRequestType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "This variable reflects the Request/State of the RAPS packet received
+     via the virtual channel."
+    DEFVAL          {rapsRsNone}
+    ::= { prvtRingEpsSubRingEntry 20 }
+
+prvtRingEpsSubRingVcPeerStatus OBJECT-TYPE
+    SYNTAX          PrvtRingEpsPeerStatusType
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "This variable reflects the status field of the RAPS packet received
+     via the virtual channel."
+    ::= { prvtRingEpsSubRingEntry 21 }
+
+prvtRingEpsSubRingPropagateTC OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "This is the MI_RAPS_Propagate_TC variable mentioned in the standard.
+     If this is enabled a flush in the subring will be followed by a flush in
+     the main instance."
+    REFERENCE       "G.8032v2 10.1.11"
+    DEFVAL          {false}
+    ::= { prvtRingEpsSubRingEntry 22 }
+
+prvtRingEpsSubRingOperationalStatus OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-only
+    STATUS          current
+    DESCRIPTION
+    "The purpose of this status is to identify to the user whether
+     this instance is ready for running. The operational status can
+     be up or down. When creating the instance the operational
+     status will be down. Receiving CCMs from the expected peer MEP on
+     the subring port will bring the operational status to up. If any
+     needed CFM configuration is removed the operational status will
+     go back to down"
+    DEFVAL          {false}
+    ::= { prvtRingEpsSubRingEntry 23 }
+
+prvtRingEpsSubRingAdminStatus OBJECT-TYPE
+    SYNTAX          TruthValue
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "Administrative status of the subring instance"
+    DEFVAL          {false}
+    ::= { prvtRingEpsSubRingEntry 24 }
+
+prvtRingEpsSubRingRowStatus OBJECT-TYPE
+    SYNTAX          RowStatus
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "The status of the row."
+    ::= { prvtRingEpsSubRingEntry 25 }
+
+prvtRingEpsSubRingControlVlan OBJECT-TYPE
+    SYNTAX          VlanIdOrNone
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION     "The vlan ID used for RAPS & CFM traffic."
+    DEFVAL          {0}
+    ::= { prvtRingEpsSubRingEntry 26 }
+
+prvtRingEpsSubRingDescription OBJECT-TYPE
+    SYNTAX DisplayString
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION "RAPS instance sub-ring description."
+    ::= { prvtRingEpsSubRingEntry 27 }
+
+prvtRingEpsSubRingRingId OBJECT-TYPE
+    SYNTAX          Unsigned32 (1..255)
+    MAX-ACCESS      read-create
+    STATUS          current
+    DESCRIPTION
+    "The last octet of the RAPS destination MAC address
+     is designated as Ring ID (01-19-A7-00-00-[Ring ID]).
+     As of G.8032v2 the destination MAC address
+     '01-19-A7-00-00-01' is used. The usage of other
+     MAC addresses is for further study."
+    REFERENCE       "G.8032v2 Appendix VII"
+    DEFVAL          {1}
+    ::= { prvtRingEpsSubRingEntry 28 }
+	
+prvtRingEpsSubRingMonitoringMethod  OBJECT-TYPE
+	SYNTAX INTEGER
+    {
+		ccm ( 1 ),
+		link-status( 2)
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Raps monitoring methods for subring port:
+	ccm - CCM messags and link status  will be used for raps monitoring,
+    link-status -Link status will be used for raps monitoring"
+	DEFVAL { 1 }
+	::= { prvtRingEpsSubRingEntry 29 }		
+	
+	
+
+-- ******************************************************************
+-- NOTIFICATIONS (TRAPS)
+-- ******************************************************************
+
+prvtRingEpsDefectAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRingEpsOperationalStatus,
+                  prvtRingEpsDefectFop
+                }
+    STATUS      current
+    DESCRIPTION
+       "This trap will be sent by any instance when it notices a defect.
+        So far only the situation when two or more RPL-owners are defined
+        in the ring is identified as a defect. This scenario is noticed when
+        the instance with the RPL-Owner role receives a RAPS packet with the
+        RB bit set in its status field from a different NodeID than its own.
+        The management entity receiving the notification can identify
+        the system from the network source address of the
+        notification, and can identify the instance reporting the change
+        by the indices in the OID of the prvtRingEpsDefectFop
+        variable in the notification."
+    ::= { prvtRingEpsNotifications 1 }
+
+prvtRingEpsSwitchoverAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRingEpsState
+                }
+    STATUS      current
+    DESCRIPTION
+       "This trap will be sent by any instance when it changes state.
+        The management entity receiving the notification can identify
+        the system from the network source address of the
+        notification, and can identify the instance reporting the change
+        by the indices in the OID of the prvtRingEpsState
+        variable in the notification."
+    ::= { prvtRingEpsNotifications 2 }
+
+prvtRingEpsSubRingDefectAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRingEpsSubRingOperationalStatus,
+                  prvtRingEpsSubRingDefectFop
+                }
+    STATUS      current
+    DESCRIPTION
+       "This trap will be sent by any subring instance when it notices a defect.
+        So far only the situation when two or more RPL-owners are defined
+        in the ring is identified as a defect. This scenario is noticed when
+        the instance with the RPL-Owner role receives a RAPS packet with the
+        RB bit set in its status field from a different NodeID than its own.
+        The management entity receiving the notification can identify
+        the system from the network source address of the
+        notification, and can identify the instance reporting the change
+        by the indices in the OID of the prvtRingEpsDefectFop
+        variable in the notification."
+    ::= { prvtRingEpsNotifications 3 }
+
+prvtRingEpsSubRingSwitchoverAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRingEpsSubRingState
+                }
+    STATUS      current
+    DESCRIPTION
+       "This trap will be sent by any subring instance when it changes state.
+        The management entity receiving the notification can identify
+        the system from the network source address of the
+        notification, and can identify the instance reporting the change
+        by the indices in the OID of the prvtRingEpsSubRingState
+        variable in the notification."
+    ::= { prvtRingEpsNotifications 4 }
+
+
+
+
+
+-- ******************************************************************
+-- PRVT-RING-EPS MIB Module - Conformance Information
+-- ******************************************************************
+
+prvtRingEpsCompliances   OBJECT IDENTIFIER ::= { prvtRingEpsConformance 1 }
+prvtRingEpsGroups        OBJECT IDENTIFIER ::= { prvtRingEpsConformance 2 }
+
+-- ******************************************************************
+-- Units of conformance
+-- ******************************************************************
+
+prvtRingEpsGroup OBJECT-GROUP
+    OBJECTS {
+	    prvtRingEpsMode,
+	    prvtRingEpsNodeRole,
+        prvtRingEpsState,
+		prvtRingEpsLocalCommand,
+	    prvtRingEpsControlVlan,
+	    prvtRingEpsPort0Ifindex,
+	    prvtRingEpsPort1Ifindex,
+	    prvtRingEpsRplPort,
+	    prvtRingEpsManualSwitchPort,
+	    prvtRingEpsCfmMdLevel,
+	    prvtRingEpsPort0Mep,
+	    prvtRingEpsPort1Mep,
+		prvtRingEpsRevertive,
+	    prvtRingEpsNoVirtualChannel,
+		prvtRingEpsHoldOffTimer,
+		prvtRingEpsWaitToRestoreTimer,
+		prvtRingEpsGuardTimer,
+        prvtRingEpsWaitToBlockTimer,
+		prvtRingEpsDefectFop,
+		prvtRingEpsPort0Status,
+		prvtRingEpsPort1Status,
+		prvtRingEpsPort0PeerNodeId,
+		prvtRingEpsPort1PeerNodeId,
+		prvtRingEpsPort0PeerCommand,
+		prvtRingEpsPort1PeerCommand,
+		prvtRingEpsPort0PeerStatus,
+		prvtRingEpsPort1PeerStatus,
+		prvtRingEpsOperationalStatus,
+		prvtRingEpsAdminStatus,
+	    prvtRingEpsRowStatus,
+        prvtRingEpsForcedSwitchPort,
+        prvtRingEpsInstanceDescription,
+        prvtRingEpsRingId,
+		prvtRingEpsPort0MonitoringMethod,
+		prvtRingEpsPort1MonitoringMethod
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the RAPS instances group."
+    ::= { prvtRingEpsGroups 1 }
+
+prvtRingEpsVlanGroup OBJECT-GROUP
+    OBJECTS {
+	    prvtRingEpsInstance,
+	    prvtRingEpsVlanRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the RAPS monitored vlans group."
+    ::= { prvtRingEpsGroups 2 }
+
+prvtRingEpsSubRingGroup OBJECT-GROUP
+    OBJECTS {
+        prvtRingEpsSubRingNodeRole,
+        prvtRingEpsSubRingState,
+        prvtRingEpsSubRingLocalCommand,
+        prvtRingEpsSubRingPortIfindex,
+        prvtRingEpsSubRingPortMep,
+        prvtRingEpsSubRingRplPort,
+        prvtRingEpsSubRingVirtualChannelVlan,
+        prvtRingEpsSubRingRevertive,
+        prvtRingEpsSubRingHoldOffTimer,
+        prvtRingEpsSubRingWaitToRestoreTimer,
+        prvtRingEpsSubRingGuardTimer,
+        prvtRingEpsSubRingWaitToBlockTimer,
+        prvtRingEpsSubRingDefectFop,
+        prvtRingEpsSubRingPortStatus,
+        prvtRingEpsSubRingPortPeerNodeId,
+        prvtRingEpsSubRingPeerCommand,
+        prvtRingEpsSubRingPeerStatus,
+        prvtRingEpsSubRingVcPeerNodeId,
+        prvtRingEpsSubRingVcPeerCommand,
+        prvtRingEpsSubRingVcPeerStatus,
+        prvtRingEpsSubRingPropagateTC,
+        prvtRingEpsSubRingOperationalStatus,
+        prvtRingEpsSubRingAdminStatus,
+        prvtRingEpsSubRingRowStatus,
+        prvtRingEpsSubRingControlVlan,
+        prvtRingEpsSubRingDescription,
+        prvtRingEpsSubRingRingId,
+		prvtRingEpsSubRingMonitoringMethod
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the RAPS subring group."
+    ::= { prvtRingEpsGroups 3 }
+
+prvtRingEpsNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+      prvtRingEpsSwitchoverAlarm,
+      prvtRingEpsDefectAlarm,
+      prvtRingEpsSubRingSwitchoverAlarm,
+      prvtRingEpsSubRingDefectAlarm
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Notifications group."
+    ::= { prvtRingEpsGroups 4 }
+
+-- ******************************************************************
+-- MIB Module Compliance statements
+-- ******************************************************************
+
+prvtRingEpsCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for support of the Ring EPS MIB module."
+    MODULE
+        MANDATORY-GROUPS {
+            prvtRingEpsGroup,
+            prvtRingEpsVlanGroup,
+            prvtRingEpsSubRingGroup,
+            prvtRingEpsNotificationsGroup
+            }
+
+    OBJECT prvtRingEpsRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    OBJECT prvtRingEpsVlanRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    OBJECT prvtRingEpsSubRingRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    ::= { prvtRingEpsCompliances 1 }
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-RIP-EXTENSION-MIB b/MIBS/telco-systems/binos/PRVT-RIP-EXTENSION-MIB
new file mode 100644
index 0000000..4702390
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-RIP-EXTENSION-MIB
@@ -0,0 +1,210 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-RIP-EXTENSION-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+
+PRVT-RIP-EXTENSION-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE
+        FROM SNMPv2-SMI
+    TruthValue, RowStatus
+        FROM SNMPv2-TC
+
+        ipSwitch   
+	                                     FROM PRVT-SWITCH-MIB;          
+
+
+
+    prvtRIPExtensionMib MODULE-IDENTITY
+    LAST-UPDATED "200801010000Z"
+    ORGANIZATION "BATM Advanced Communication"
+    CONTACT-INFO
+        "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+    DESCRIPTION
+        "The RIP extension MIB module contains additional information, needed to
+         control the RIP protocol, that is not found in the standard RFC"
+
+    -- revision history   
+         REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions." 
+     REVISION     "200502160000Z"
+     	 DESCRIPTION
+		"Fixed spelling errors and changed the contact info." 
+
+	REVISION     "200305060000Z"
+	DESCRIPTION
+					"Move to SMI-V2."
+    REVISION     "200211110000Z"
+    DESCRIPTION
+        "Initial version."
+
+
+    ::= { routingProtocols 1 }
+    -------------------------------------------------------------------------------
+    --     PRIVATE BRANCH  PRODUCTS
+    -------------------------------------------------------------------------------
+    routingProtocols   OBJECT IDENTIFIER ::= { ipSwitch 4 }
+
+
+    ripExtension OBJECT IDENTIFIER ::= { prvtRIPExtensionMib 1 }
+
+    ripEnable OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object enables/disables the RIP process in the switch"
+    ::= { ripExtension 1 }
+    
+    ripRedistributeTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF RipRedistributeEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+    "The table represents the routing protocols, redistributed into the RIP 
+    routing domain. 
+    
+    Creation of conceptual row in the table starts the redistribution of 
+    the specified protocol, which would lead to the injection of routing information 
+    from that protocol into RIP. 
+    
+    Deletion of conceptual row would stop the redistribution of that protocol into RIP."
+    ::= { ripExtension 2 }
+
+    ripRedistributeEntry OBJECT-TYPE
+    SYNTAX RipRedistributeEntry
+    MAX-ACCESS not-accessible
+    STATUS current
+    DESCRIPTION
+               "The conceptual row represents a routing protocol, redistributed into RIP"
+    INDEX {ripRedistributeProtocol}
+    ::= {ripRedistributeTable 1}
+
+    RipRedistributeEntry ::= SEQUENCE {
+        ripRedistributeProtocol       INTEGER,
+        ripRedistributeMetric         INTEGER,
+        ripRedistributeRouteMap       OCTET STRING,
+        ripRedistributeRowStatus      RowStatus
+    }
+
+
+    ripRedistributeProtocol OBJECT-TYPE
+    SYNTAX INTEGER {
+           kernel(1),
+           connected(2),
+           static(3),
+           ospf(4),
+           bgp(5)
+           }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+		"The specific routes redistributed into RIP. For T4R models the valid values 
+		are connected, static and OSPF. For T5 the valid values are kernel, connected, 
+		static and OSPF. For T5RN, T5Pro, T6, and E-series and G-series all of the above 
+		routes can be redistributed"
+        ::= { ripRedistributeEntry 1}
+
+    ripRedistributeMetric OBJECT-TYPE
+    SYNTAX INTEGER (1..16)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+		"The metric, with which the external routes will be redistributed in the RIP"
+        ::= {ripRedistributeEntry 2}
+
+    ripRedistributeRouteMap OBJECT-TYPE
+    SYNTAX OCTET STRING
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+               "The route map that would filter the redistributed routing information"
+    ::= {ripRedistributeEntry 3}
+
+    ripRedistributeRowStatus OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "Indicates the status of the row. Setting of this field to active enables the 
+        redistribution of the protocol. Setting this field to destroy disables the 
+        redistribution of the protocol"
+    ::= {ripRedistributeEntry 4}
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-RSVP-MIB b/MIBS/telco-systems/binos/PRVT-RSVP-MIB
new file mode 100644
index 0000000..c55852e
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-RSVP-MIB
@@ -0,0 +1,1868 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   PRVT-RSVP-MIB.mib
+-- ** Project:    T-Metro Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-RSVP-MIB DEFINITIONS ::= BEGIN
+
+  IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE,
+      Integer32, Unsigned32, IpAddress
+                                        FROM SNMPv2-SMI
+
+      MODULE-COMPLIANCE, OBJECT-GROUP   FROM SNMPv2-CONF
+
+      TEXTUAL-CONVENTION, RowStatus, TruthValue
+                                        FROM SNMPv2-TC
+      InterfaceIndexOrZero              FROM IF-MIB
+      InetAddressIPv6                   FROM INET-ADDRESS-MIB
+        mpls				 		FROM PRVT-CR-LDP-MIB;
+
+
+
+  prvtRsvp MODULE-IDENTITY
+       LAST-UPDATED "200804140000Z" 
+      ORGANIZATION "BATM Advanced Communication"
+      CONTACT-INFO
+                   " BATM/Telco Systems Support team
+					Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"      
+				DESCRIPTION  "The MIB module for management of the PRVT-RSVP
+                    product."
+
+   -- Revision history.  
+    REVISION     "200804140000Z"
+    DESCRIPTION
+        "Added range constraints to
+         prvtRsvpProductLocalRepairDelay, prvtRsvpProductRefreshInterval,
+         prvtRsvpProductNotifyRRInterval, prvtRsvpProductNotifyRRLimit,
+         prvtRsvpProductInitPathRRInterval, prvtRsvpProductInitPathRRLimit."
+
+  
+    REVISION     "200606020000Z"
+    DESCRIPTION
+        "Initial version."
+
+  ::= { mpls 7 }
+
+  prvtRsvpObjects OBJECT IDENTIFIER ::= { prvtRsvp 1 } -- tables
+
+-- Textual conventions
+
+  PrvtRsvpAdminStatus ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The desired administrative state of an RSVP
+                   entity."
+      SYNTAX      INTEGER {
+                      up(1),
+                      down(2)
+                  }
+
+  PrvtRsvpOperStatus ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The current operational state of an RSVP entity."
+      SYNTAX      INTEGER {
+                      up(1),          -- active
+                      down(2),        -- inactive
+                      goingUp(3),     -- activating
+                      goingDown(4),   -- deactivating
+                      actFailed(5)    -- activation failed
+                  }
+
+  PrvtRsvpIndex ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The index value identifying an RSVP entity."
+      SYNTAX      Unsigned32
+
+  PrvtRsvpDiagReqIndex ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION
+          "The index value identifying an RSVP session that is being
+           diagnosed."
+      SYNTAX      Unsigned32
+
+  PrvtRsvpDiagNodeIndexType ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION
+          "The index value identifying a node within an RSVP session that is
+           being diagnosed."
+      SYNTAX      Unsigned32
+
+  PrvtRsvpDiagNodeTypeVal ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The type of a node in a session that is being diagnosed."
+      SYNTAX      INTEGER {
+                      missing(1),     -- no information received
+                      ingress(2),     -- the ingress node
+                      transit(3),     -- an intermediate node
+                      egress(4)       -- the egress node
+                  }
+
+-- End of textual conventions
+
+
+-- RSVP entity table
+-- This table is used to create and manage RSVP entities.
+
+  prvtRsvpProductTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF PrvtRsvpProductEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The table of RSVP entities."
+     ::= { prvtRsvpObjects 1 }
+
+  prvtRsvpProductEntry OBJECT-TYPE
+      SYNTAX      PrvtRsvpProductEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Each entry represents an RSVP entity."
+      INDEX { prvtRsvpProductIndex }
+     ::= { prvtRsvpProductTable 1 }
+
+  PrvtRsvpProductEntry ::= SEQUENCE {
+          prvtRsvpProductIndex                   PrvtRsvpIndex,
+          prvtRsvpProductASNumber                Integer32,
+          prvtRsvpProductSenderTTL               Integer32,
+          prvtRsvpProductMinTimerPeriod          Integer32,
+          prvtRsvpProductAPIIfIndex              InterfaceIndexOrZero,
+          prvtRsvpProductAPIAddress              OCTET STRING,
+          prvtRsvpProductAPIRefreshInterval      Integer32,
+          prvtRsvpProductLocalRepairDelay        Integer32,
+          prvtRsvpProductRefreshInterval         Integer32,
+          prvtRsvpProductRefreshMultiple         Integer32,
+          prvtRsvpProductRfrshSlewDenom          Integer32,
+          prvtRsvpProductRfrshSlewNumerator      Integer32,
+          prvtRsvpProductBlockadeMultiple        Integer32,
+          prvtRsvpProductSocketBufPoolSize       Integer32,
+          prvtRsvpProductSwitchBufPoolSize       Integer32,
+          prvtRsvpProductTeMibBufPoolSize        Integer32,
+          prvtRsvpProductRoutingBufPoolSize      Integer32,
+          prvtRsvpProductLSPSetupPriority        Integer32,
+          prvtRsvpProductLSPHoldingPriority      Integer32,
+          prvtRsvpProductAdminStatus             PrvtRsvpAdminStatus,
+          prvtRsvpProductOperStatus              PrvtRsvpOperStatus,
+          prvtRsvpProductRowStatus               RowStatus,
+          prvtRsvpProductLsrIndex                Unsigned32,
+          prvtRsvpProductTeMibIndex              Unsigned32,
+          prvtRsvpProductMultiStackSupport       Integer32,
+          prvtRsvpProductUseHopByHop             TruthValue,
+          prvtRsvpProductUseNotify               TruthValue,
+          prvtRsvpProductNotifyRRDecay           Integer32,
+          prvtRsvpProductNotifyRRInterval        Integer32,
+          prvtRsvpProductNotifyRRLimit           Integer32,
+          prvtRsvpProductAllowIPEncap            TruthValue,
+          prvtRsvpProductProtocolExtensions      BITS,
+          prvtRsvpProductPSRFlags                BITS,
+          prvtRsvpProductInitPathRRDecay         Integer32,
+          prvtRsvpProductInitPathRRInterval      Integer32,
+          prvtRsvpProductInitPathRRLimit         Integer32,
+          prvtRsvpProductEnableUni               TruthValue,
+          prvtRsvpProductRestartCapable          TruthValue,
+          prvtRsvpProductRestartTime             Unsigned32,
+          prvtRsvpProductRecoveryTime            Unsigned32,
+          prvtRsvpProductMinPeerRestart          Integer32,
+          prvtRsvpProductGracefulDelTimeout      Integer32,
+          prvtRsvpProductEgressDelBehavior       INTEGER,
+          prvtRsvpProductEnabUniConnSplicing     TruthValue,
+          prvtRsvpProductFastRerouteCaps         BITS,
+          prvtRsvpProductFastRroutBkpRtryInt     Integer32,
+          prvtRsvpProductErrorActionFlags        BITS,
+          prvtRsvpProductEnableNni               INTEGER,
+          prvtRsvpProductBehaviorFlags           BITS,
+          prvtRsvpProductLabelSetStyle           INTEGER,
+          prvtRsvpProductLabelSetOperStatus      INTEGER,
+          prvtRsvpProductLabelSetTrapEnable      TruthValue,
+          prvtRsvpProductLabelSetChngAct         Integer32,
+          prvtRsvpProductExtPrtAdminStatus       PrvtRsvpAdminStatus,
+          prvtRsvpProductUniIncSonetProfile      Unsigned32,
+          prvtRsvpProductFrrFacAdminStatus       PrvtRsvpAdminStatus,
+          prvtRsvpProductFrrFacOperStatus        PrvtRsvpOperStatus,
+          prvtRsvpProductIpv6AdminStatus         PrvtRsvpAdminStatus,
+          prvtRsvpProductIpv6OperStatus          PrvtRsvpOperStatus,
+          prvtRsvpProductAPIIpv6Address          InetAddressIPv6
+      }
+
+  prvtRsvpProductIndex OBJECT-TYPE
+      SYNTAX      PrvtRsvpIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The index of this prvtRsvpProductEntry.  This is the
+           HAF entity index passed on the entity create parameters."
+     ::= { prvtRsvpProductEntry 1 }
+
+  prvtRsvpProductASNumber OBJECT-TYPE
+      SYNTAX      Integer32 (0..65535)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The number identifying the autonomous system (AS) to which
+        this node belongs."
+      DEFVAL { 1 }
+     ::= { prvtRsvpProductEntry 2 }
+
+  prvtRsvpProductSenderTTL OBJECT-TYPE
+      SYNTAX      Integer32 (0..255)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The TTL set on messages originating at this node.  A value
+        of 0 indicates this number is determined by other means."
+      DEFVAL { 0 }
+     ::= { prvtRsvpProductEntry 3 }
+
+  prvtRsvpProductMinTimerPeriod OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The minimum granularity to allow an internal timer to be
+        set in the PRVT-RSVP product code."
+      DEFVAL { 200 }
+     ::= { prvtRsvpProductEntry 4 }
+
+  prvtRsvpProductAPIIfIndex OBJECT-TYPE
+      SYNTAX      InterfaceIndexOrZero
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "Management assigned interface identifier for the (internal) LRAPI
+        interface between RSVP and TE-MIB components.  This must be unique in
+        the interface index namespace of the node - it MUST not match any real
+        interface index.
+        It is recommended that this is set to zero or 0x7FFFFFFF."
+      DEFVAL { 2147483647 }
+     ::= { prvtRsvpProductEntry 5 }
+
+  prvtRsvpProductAPIAddress OBJECT-TYPE
+      SYNTAX      OCTET STRING (SIZE(4..16))
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "Management assigned IP address used to identify the (internal) LRAPI
+        interface between RSVP and TE-MIB components.
+        The configured API address MUST not be a real address in the network.
+        It is recommended that this is set to a non-zero reserved address
+        value, such as 224.0.0.0.
+        If multi-stack support is set to PHOP, this address must be unique for
+        each RSVP stack in the node.
+        The same address(es) can be used on all nodes in the network."
+      DEFVAL { 'E0000000'H } -- 224.0.0.0
+     ::= { prvtRsvpProductEntry 6 }
+
+  prvtRsvpProductAPIRefreshInterval OBJECT-TYPE
+      SYNTAX      Integer32
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "This field is now deprecated."
+      DEFVAL { 30000 }
+     ::= { prvtRsvpProductEntry 7 }
+
+  prvtRsvpProductLocalRepairDelay OBJECT-TYPE
+      SYNTAX      Integer32 (-1 | 1000..2147483647)
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "This object is used to set the delay between detection of a
+        path error and instigation of local repair procedures.  This
+        allows local routing updates to converge.
+        A value of -1 indicates that local
+        repair procedures should not take place, but that the error
+        should be propagated upstream.
+        Where FRR capabilities are supported at this node
+        local_repair_delay must be set to -1."
+
+
+      DEFVAL { 1000 }
+     ::= { prvtRsvpProductEntry 8 }
+
+  prvtRsvpProductRefreshInterval OBJECT-TYPE
+      SYNTAX      Integer32 (1000..2147483647)
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "This RSVP value, R,  which is used to set the average
+        interval between refresh path and resv messages.
+        Note : If values for the if_refresh_interval and if_refresh_multiple
+        are configured such that the following inequality is not obeyed :
+        6 * refresh_interval * (refresh_multiple + 0.5) < 0x7FFFFFFF.
+        Then the time-to-die for the path value will be set to its maximum
+        value and it is probable that the lsp will time out before a refresh
+        arrives."
+      DEFVAL { 30000 }
+     ::= { prvtRsvpProductEntry 9 }
+
+  prvtRsvpProductRefreshMultiple OBJECT-TYPE
+      SYNTAX      Integer32 (1..214783647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The RSVP value, K, which is the number of unresponded Path
+        or Resv refresh attempts which must be made, spaced by
+        the refresh interval before the state is deemed to have
+        timed out.
+        Note : See note in prvtRsvpProductRefreshInterval above."
+      DEFVAL { 3 }
+     ::= { prvtRsvpProductEntry 10 }
+
+  prvtRsvpProductRfrshSlewDenom OBJECT-TYPE
+      SYNTAX      Integer32 (1..214783647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The denominator of the fraction, SlewMax, which is the
+        maximum allowable increase in the refresh interval, R, to
+        prevent state timeout while changing R.  R is increased by
+        this fraction until it reaches the new desired value."
+      DEFVAL { 10 }
+     ::= { prvtRsvpProductEntry 11 }
+
+  prvtRsvpProductRfrshSlewNumerator OBJECT-TYPE
+      SYNTAX      Integer32 (1..214783647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The numerator of the fraction, SlewMax, which is the maximum
+        allowable increase in the refresh interval, R, to prevent
+        state timeout while changing R.  R is increased by this
+        fraction until it reaches the new desired value."
+      DEFVAL { 3 }
+     ::= { prvtRsvpProductEntry 12 }
+
+  prvtRsvpProductBlockadeMultiple OBJECT-TYPE
+      SYNTAX      Integer32 (1..214783647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The RSVP value, Kb, which is the number of refresh timeout
+        periods after which blockade state is deleted."
+      DEFVAL { 2 }
+     ::= { prvtRsvpProductEntry 13 }
+
+  prvtRsvpProductSocketBufPoolSize OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The number of pre-reserved buffers available for sending
+        sockets data.  This is used to pace the sockets data flows."
+      DEFVAL { 8 }
+     ::= { prvtRsvpProductEntry 14 }
+
+  prvtRsvpProductSwitchBufPoolSize OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The number of pre-reserved buffers available for programming
+        the switch.  This is used to ensure programming operations do
+        not fail in buffer shortage conditions."
+      DEFVAL { 8 }
+     ::= { prvtRsvpProductEntry 15 }
+
+  prvtRsvpProductTeMibBufPoolSize OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The number of pre-reserved buffers available for signalling
+        TE-MIB.  This is used to ensure signals are not lost in buffer
+        shortage conditions."
+      DEFVAL { 8 }
+     ::= { prvtRsvpProductEntry 16 }
+
+  prvtRsvpProductRoutingBufPoolSize OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The number of pre-reserved buffers available for route
+        queries.  This is used to ensure re-routing of many LSPs does
+        not fail in buffer shortage conditions."
+      DEFVAL { 8 }
+     ::= { prvtRsvpProductEntry 17 }
+
+  prvtRsvpProductLSPSetupPriority OBJECT-TYPE
+      SYNTAX      Integer32 (0..7)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The setup priority to apply to LSPs which are not
+        signalling this parameter.  0 represents the highest
+        priority, 7 the lowest.  The value of this object must be
+        numerically more or equal (so lower or equal priority)
+        than the value of the holding priority object."
+      DEFVAL { 4 }
+     ::= { prvtRsvpProductEntry 18 }
+
+  prvtRsvpProductLSPHoldingPriority OBJECT-TYPE
+      SYNTAX      Integer32 (0..7)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+      "The holding priority to apply to LSPs which are not
+       signalling this parameter.  0 represents the highest
+       priority, 7 the lowest.  The value of this object must be
+       numerically less or equal (so higher or equal priority)
+       than the value of the holding priority object."
+      DEFVAL { 3 }
+     ::= { prvtRsvpProductEntry 19 }
+
+  prvtRsvpProductAdminStatus OBJECT-TYPE
+      SYNTAX      PrvtRsvpAdminStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The desired administrative state of the RSVP entity."
+      DEFVAL { up }
+     ::= { prvtRsvpProductEntry 20 }
+
+  prvtRsvpProductOperStatus OBJECT-TYPE
+      SYNTAX      PrvtRsvpOperStatus
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+       "The current operational state of this instance of PRVT-RSVP."
+     ::= { prvtRsvpProductEntry 21 }
+
+  prvtRsvpProductRowStatus OBJECT-TYPE
+      SYNTAX      RowStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "Used to create and delete a PRVT-RSVP Product Table entry.
+        When this object is set to 'active', only the
+        prvtRsvpProductAdminStatus object in the row may be modified."
+      DEFVAL { active }
+     ::= { prvtRsvpProductEntry 22 }
+
+  prvtRsvpProductLsrIndex OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The index of the PRVT-LMGR product instance which this
+        PRVT-RSVP is to join to as its LDB interface provider.  If
+        this value is not specified, or the value of this object
+        is 0, PRVT-RSVP will use the prvtRsvpProductIndex value as the
+        Lsr index when joining on the LDB interface."
+      DEFVAL { 0 }
+     ::= { prvtRsvpProductEntry 23 }
+
+  prvtRsvpProductTeMibIndex OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The index of the TE-MIB product instance which this
+        PRVT-RSVP is to join to as its LRA interface provider. If
+        this value is not specified, or the value of this object
+        is 0, PRVT-RSVP will use the prvtRsvpProductIndex value as the
+        TeMib Index when joining on the LRA interface."
+       DEFVAL { 0 }
+      ::= { prvtRsvpProductEntry 24 }
+
+  prvtRsvpProductMultiStackSupport OBJECT-TYPE
+      SYNTAX      Integer32 (1..3)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "A flag to indicate if multiple RSVP stacks are present
+         in the same system as the current one and, if so, how
+         they are supported.  If set to PHOP, Path messages are
+         forwarded to PRVT-RSVP with the Previous Hop value set as
+         the hop prior to the incoming interface, not as the next
+         hop interface as normal.  If set to LIH, the hardware
+         location of the current RSVP stack is used as the LIH in
+         the HOP object."
+      DEFVAL { 1 }
+     ::= { prvtRsvpProductEntry 25 }
+
+  prvtRsvpProductUseHopByHop OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "A flag to indicate that PRVT-RSVP should use the hop by hop
+         addressing scheme for PATH and PATH-TEAR messages it
+         sends.  If set then the IP addresses used in the IP header
+         of PATH messages forwarded by PRVT-RSVP set source as the
+         local outgoing interface IP address, and destination as
+         the next hop router IP address."
+      DEFVAL { false }
+     ::= { prvtRsvpProductEntry 26 }
+
+  prvtRsvpProductUseNotify OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "A flag to indicate that PRVT-RSVP should attempt to insert
+         a Notify Request object in all Path requests that is sends
+         as ingress and all Resv requests that it sends as egress.
+         The precise behavior is modified by a user exit called by
+         the RSVP code.
+
+         This field is not used unless the mplsTunnelUpNotRecip or
+         mplsTunnelDownNotRecip fields in TE-MIB are set to 0.0.0.0."
+      DEFVAL { false }
+     ::= { prvtRsvpProductEntry 27 }
+
+  prvtRsvpProductNotifyRRDecay OBJECT-TYPE
+      SYNTAX      Integer32 (0..100)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The percentage increase in the rapid retransmission
+         interval for each consecutive unacknowledged RSVP Notify
+         message.  A value of 0 indicates a constant retransmission
+         rate."
+      DEFVAL { 100 }
+     ::= { prvtRsvpProductEntry 28 }
+
+  prvtRsvpProductNotifyRRInterval OBJECT-TYPE
+      SYNTAX      Integer32 (1000..2147483647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The interval in milliseconds before a Notify message is
+         first resent if no acknowledgement is received."
+      DEFVAL { 2000 }
+     ::= { prvtRsvpProductEntry 29 }
+
+  prvtRsvpProductNotifyRRLimit OBJECT-TYPE
+      SYNTAX      Integer32 (1..2147483647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The maximum number of times a Notify message is resent if
+         no acknowledgement is received."
+      DEFVAL { 2 }
+     ::= { prvtRsvpProductEntry 30 }
+
+  prvtRsvpProductAllowIPEncap OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "A flag to indicate that PRVT-RSVP should support the use of
+         IP encapsulation of RSVP packets, which are required for
+         out-of-band signaling.  If set, then PRVT-RSVP will accept
+         incoming RSVP packets that are IP encapsulated, and will
+         IP encapsulate outgoing packets whenever the IP routing
+         stub indicates that it is required for a particular route."
+      DEFVAL { false }
+     ::= { prvtRsvpProductEntry 31 }
+
+  prvtRsvpProductProtocolExtensions OBJECT-TYPE
+      SYNTAX      BITS { bypassFastReroute(0),
+                         detourFastReroute(1),
+                         noResAffOnInIf(2)
+                       }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Specifies which extensions to the standard RSVP-TE protocol
+         are enabled.  For fully standards-compliant behavior, set
+         this parameter to zero (no bits set).  To enable specific
+         non-standard protocol extensions, set this parameter to the
+         bitwise OR of whichever of the following behaviors you wish
+         to enable.
+
+         - bypassFastReroute: Enable support for facility fast reroute
+         protection of LSPs (bypass LSP protection).  This flag is
+         deprecated in favour of the
+         prvtRsvpProductFrrFacAdminStatus field which can be
+         modified while RSVP is admin up, however either field can be
+         used.  When this flag is set RSVP automatically sets the
+         prvtRsvpProductFrrFacAdminStatus.
+
+         - detourFastReroute: Enable support for one-to-one fast
+         reroute protection of LSPs (detour LSP protection).
+
+         -  noResAffOnInIf: Disable resource affinity checking on
+         incoming interfaces for LSPs.  If this flag is set, RSVP
+         will accept Path messages which use invalid resource
+         affinities for the incoming interface used by the LSP."
+
+      DEFVAL { { } }
+     ::= { prvtRsvpProductEntry 32 }
+
+  prvtRsvpProductPSRFlags OBJECT-TYPE
+      SYNTAX      BITS { pathErrPSRSet(0),
+                         pathErrPSRNotSet(1),
+                         ldbCommonRcvd(2),
+                         ldbPreempted(3),
+                         routingError(4),
+                         invalidPathMsg(5),
+                         sessionExpired(6),
+                         unableToRepairRoute(7),
+                         unableToRepairIf(8),
+                         reachedRetryLimit(9),
+                         unableToRefresh(10),
+                         resvErrTurnaround(11),
+                         incomingIfDown(12),
+                         outgoingIfDown(13)
+                       }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "This field is used by PRVT-RSVP to determine whether it
+         should set the Path State Removed flag on a PathErr (and
+         therefore remove corresponding state and generate a
+         PathTear).  Each bit of this flags field corresponds to a
+         situation where PRVT-RSVP may generate a PathErr.  Setting a
+         particular bit will result in PRVT-RSVP removing state,
+         setting the Path State Removed flag and generating a
+         PathTear in that corresponding situation.  The possible
+         bit values are
+
+         - pathErrPSRSet: PRVT-RSVP has received a PathErr message
+         with the Path State Removed flag set.
+
+         - pathErrPSRNotSet: PRVT-RSVP has received a PathErr message
+         with the Path State Removed flag unset.
+
+         - ldbCommonRcvd: PRVT-RSVP has received a negative response
+         to an ATG_LDB_RESERVE_LSP_XC or ATG_LDB_CONNECT_LSP_XC
+         message.
+
+         - ldbPreempted: PRVT-RSVP has received a Preemption message
+         from Label Manager.
+
+         - routingError: PRVT-RSVP has received a Negative response
+         to an ATG_IPR_QUERY_ROUTE message.
+
+         - invalidPathMsg: PRVT-RSVP has received an invalid Path
+         message.
+
+         - sessionExpired:  A session in PRVT-RSVP has expired.
+
+         - unableToRepairRoute:  A route has been removed and
+         PRVT-RSVP is unable to start local repair.
+
+         - unableToRepairIf:  An interface has been removed and
+         PRVT-RSVP is unable start local repair.
+
+         - reachedRetryLimit: An initial Path Message has reached
+         its retry limit.
+
+         - unableToRefresh: PRVT-RSVP has been unable to refresh an
+         LSP.
+
+         - resvErrTurnaround: PRVT-RSVP has received a ResvErr at the
+         Egress node containing a REROUTING object and this is to
+         be turned round into a PathErr.
+
+         - incomingIfDown: The incoming MPLS data interface for
+         an LSP has been deactivated.
+
+         - outgoingIfDown: The outgoing MPLS data interface for
+         an LSP has been deactivated."
+
+      DEFVAL { {} }
+     ::= { prvtRsvpProductEntry 33 }
+
+  prvtRsvpProductInitPathRRDecay OBJECT-TYPE
+      SYNTAX      Integer32 (0..100)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The percentage increase in the rapid
+         retransmission interval for each consecutive
+         unacknowledged RSVP Initial Path message.  A value of 0
+         indicates a constant retransmission rate.
+
+         A Path message is treated as an initial Path if it is the
+         Path message which creates the LSP or a Path refresh
+         message which requires re-routing."
+      DEFVAL { 100 }
+     ::= { prvtRsvpProductEntry 34 }
+
+  prvtRsvpProductInitPathRRInterval OBJECT-TYPE
+      SYNTAX      Integer32  (1000..2147483647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The rapid retransmission interval in milliseconds before
+         an Initial Path message is first resent if no
+         acknowledgement is received.
+
+         A Path message is treated as an initial Path if it is the
+         Path message which creates the LSP or a Path refresh
+         message which requires re-routing."
+      DEFVAL { 2000 }
+     ::= { prvtRsvpProductEntry 35 }
+
+  prvtRsvpProductInitPathRRLimit OBJECT-TYPE
+      SYNTAX      Integer32 (1..2147483647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The maximum number of times an Initial Path message is
+         resent if no acknowledgement is received.
+
+         A Path message is treated as an initial Path if it is the
+         Path message which creates the LSP or a Path refresh
+         message which requires re-routing."
+      DEFVAL { 2 }
+     ::= { prvtRsvpProductEntry 36 }
+
+  prvtRsvpProductEnableUni OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "A flag to indicate whether the local node supports UNI
+           signaling messages."
+      DEFVAL { false }
+     ::= { prvtRsvpProductEntry 37 }
+
+  prvtRsvpProductRestartCapable OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "A flag to indicate whether the local node should advertise
+           itself as restart capable.  This should be set to true
+           if fault-tolerance is enabled in PRVT-MPLS or if the node
+           supports recovery procedures."
+      DEFVAL { false }
+     ::= { prvtRsvpProductEntry 38 }
+
+  prvtRsvpProductRestartTime OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The time in milliseconds that the local node takes to
+         restart RSVP-TE and the communication channel used for
+         RSVP communication.  This is advertised to neighbors in
+         the Restart_Cap object in Hello messages.
+
+         The value chosen should be large enough for RSVP to be
+         terminated and restarted.  If fault-tolerance is enabled
+         in PRVT-MPLS, then sufficient time should be allowed for
+         RSVP to fail over, which should include the time taken for
+         the audit phase to complete.
+
+         A value of 0xFFFFFFFF may be configured to imply an infinite
+         restart time.
+
+         Only used if prvtRsvpProductRestartCapable is set to true.
+
+         Note that the maximum real time value that can be set is
+         0x7FFFFFFF.  If a value is requested greater than
+         0x7FFFFFFF and less than 0xFFFFFFFF the request will be
+         rejected."
+
+      DEFVAL { 10000 }
+     ::= { prvtRsvpProductEntry 39 }
+
+  prvtRsvpProductRecoveryTime OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The period of time in milliseconds that the local node
+         would like neighbors to take to resyncronize RSVP and
+         MPLS forwarding information after the re-establishment of
+         Hello connectivity.  This is advertised to neighbors in
+         the Restart_Cap object in Hello messages.
+
+         A value of zero indicates that the node does not support
+         resynchronization following failure of the local node.
+
+         A value of 0xFFFFFFFF indicates an infinite recovery time.
+
+         Note that if fault-tolerance is not enabled in PRVT-MPLS and
+         the node is acting as an ingress for tunnels, then any
+         ingress tunnels that need to be recovered should be
+         configured during this recovery period.  These tunnels
+         should be configured in TE-MIB with the admin_status set
+         to UP, otherwise they will be lost from the switch
+         controller.
+
+         Only used if prvtRsvpProductRestartCapable is set to true.
+
+         Note that the maximum real time value that can be set is
+         0x7FFFFFFF.  If a value is requested greater than
+         0x7FFFFFFF and less than 0xFFFFFFFF the request will be
+         rejected."
+
+      DEFVAL { 10000 }
+     ::= { prvtRsvpProductEntry 40 }
+
+  prvtRsvpProductMinPeerRestart OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The mininum period of time in milliseconds that RSVP
+         should wait for a restart capable neighbor to regain
+         Hello connectivity before invoking procedures related to
+         communication loss.
+
+         RSVP will wait for the maximum of this time and the
+         restart_time advertised in the RESTART_CAP object in Hello
+         messages from the neighbor."
+      DEFVAL { 0 }
+     ::= { prvtRsvpProductEntry 41 }
+
+  prvtRsvpProductGracefulDelTimeout OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "The time in milliseconds that PRVT-MPLS will wait for
+         graceful deletion to complete before the forced deletion
+         procedure is used instead."
+      DEFVAL { 30000 }
+     ::= { prvtRsvpProductEntry 42 }
+
+  prvtRsvpProductEgressDelBehavior OBJECT-TYPE
+      SYNTAX      INTEGER { delWithPathErr(1),
+                            delWithResvD(2)
+                          }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Specifies the action that an egress node should take in
+         the graceful deletion procedure on receipt of a Path
+         message containing an Admin Status object with the D
+         and R bits set.  The possible values are:-
+
+         - delWithPathErr:  Send a PathErr message with the
+         Path_State_removed flag set.
+
+         - delWithResvD:  Send a Resv message containing an Admin
+         Status object with the D bit set."
+      DEFVAL { delWithPathErr }
+     ::= { prvtRsvpProductEntry 43 }
+
+  prvtRsvpProductEnabUniConnSplicing OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "A flag to indicate whether UNI-N nodes should allow the
+         splicing of UNI connections with proprietary ON
+         connections."
+      DEFVAL { false }
+     ::= { prvtRsvpProductEntry 44 }
+
+  prvtRsvpProductFastRerouteCaps OBJECT-TYPE
+      SYNTAX      BITS { fastReroutePLR(0),
+                         fastRerouteMP(1),
+                         fastRerouteDetourRestart(2)
+                       }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Specifies what fast reroute capabilities are enabled
+         on this node.  This field is only valid if the fast
+         reroute extension is enabled in the
+         prvtRsvpProductProtocolExtensions field above.
+
+         -  PLR: Node provides fast reroute point of local repair
+         capability.
+
+         -  MP: Node provides fast reroute merge point capability.
+
+         -  DetourRestart: Node implements some protocol extensions
+         to recover detour fast reroute LSPs after a node restart
+         or an adjacent node restart.  This flag is only valid if
+         detourFastReroute flag is set in the
+         prvtRsvpProductProtocolExtensions field above.
+
+         Note that a node can still perform some FRR processing
+         even if the PLR and MP flags are clear (at a detour transit
+         for instance)."
+      DEFVAL { { } }
+     ::= { prvtRsvpProductEntry 45 }
+
+  prvtRsvpProductFastRroutBkpRtryInt OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "When this node is a PLR, this field specifies the period
+         that the node should wait before retrying the setup of a
+         backup LSP which failed last time because no route was
+         available.  In the case that a backup LSP is set up but an
+         error is received from upstream, setup will be attempted
+         again immediately.
+         This field is only valid if this node is defined as PLR
+         capable in the _prvtRsvpProductFastRerouteCapabilities_
+         field above."
+      DEFVAL { 30000 }
+     ::= { prvtRsvpProductEntry 46 }
+
+  prvtRsvpProductErrorActionFlags OBJECT-TYPE
+      SYNTAX      BITS { eafTearStateOnLSIErr(0)
+                       }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "This field is used by PRVT-RSVP to determine whether it
+         should take any special action following certain types of
+         local errors.  Each bit of this flags field corresponds to
+         an error and a corresponding action.
+
+         When one of these errors occurs, the relevant bit flag is
+         checked - if set, the specified action is taken; if not
+         set, the normal action is taken according the RSVP
+         protocol.  The possible bit values are the following.
+
+         - eafTearStateOnLSIErr:  When PRVT-RSVP receives a negative
+           response to an ATG_LDB_CONNECT_LSP_XC message on a UNI
+           node, the Path state is torn down."
+
+      DEFVAL { {} }
+     ::= { prvtRsvpProductEntry 47 }
+
+  prvtRsvpProductEnableNni OBJECT-TYPE
+      SYNTAX      INTEGER {
+                      disabled(1),
+                      enabled(2),
+                      disabling(3)
+                  }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "A flag to indicate whether the local node supports NNI
+         signaling messages."
+      DEFVAL { disabled }
+     ::= { prvtRsvpProductEntry 48 }
+
+  prvtRsvpProductBehaviorFlags OBJECT-TYPE
+      SYNTAX      BITS { enableTTLMatch(0)
+                       }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Specifies some detailed aspects of the behavior of
+         PRVT-RSVP.  This field may be changed while _admin_status_
+         is up.
+
+         - enableTTLMatch: Whether to discard received RSVP
+         packets sent with the Router Alert option if the IP and
+         RSVP TTL values do not match.  In certain circumstances
+         TTL comparison can identify RSVP service breaks, and allow
+         the discarding of packets that would otherwise disrupt
+         installed LSPs.
+
+         This option has no effect for Out Of Band operation.
+
+         This option should be left disabled for LSP hierarchy
+         operation (LSPs set up over existing LSPs) and for
+         Facility Fast Reroute (which sets up backup LSPs over
+         existing bypass LSPs)."
+
+      DEFVAL { {} }
+     ::= { prvtRsvpProductEntry 49 }
+
+  prvtRsvpProductLabelSetStyle OBJECT-TYPE
+      SYNTAX      INTEGER {
+                      excludeLabelHeader(1),
+                      includeLabelHeader(2)
+                  }
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Specifies the style of LABEL_SET object that should be
+         used.  RFCs 3741 and 3743 are unclear whether the
+         LABEL_SET object should include LABEL headers.  The
+         correct interpretation is that the header should not be
+         present, but there are implementations that include the
+         LABEL header, so this option is included for compatibility
+         with these implementations.
+
+         - excludeLabelHeader:  The LABEL_SET object contains
+           concatenated LABEL values without the object headers.
+
+         - includeLabelHeader:  The LABEL_SET object contains
+           concatenated LABEL objects with the object headers."
+      DEFVAL { excludeLabelHeader }
+     ::= { prvtRsvpProductEntry 50 }
+
+  prvtRsvpProductLabelSetOperStatus OBJECT-TYPE
+      SYNTAX      INTEGER {
+                      excludeLabelHeader(1),
+                      includeLabelHeader(2),
+                      goingToExclude(3),
+                      goingToInclude(4)
+                  }
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+       "The current operational state of Label Set style.
+         - excludeLabelHeader:  The LABEL_SET object contains
+           concatenated LABEL values without the object headers.
+
+         - includeLabelHeader:  The LABEL_SET object contains
+           concatenated LABEL objects with the object headers.
+
+         - goingToExclude:  The Label Set Style is being changed
+           from includeLabelHeader to excludeLabelHeader.
+
+         - goingToInclude:  The Label Set Style is being changed
+           from excludeLabelHeader to includeLabelHeader."
+     ::= { prvtRsvpProductEntry 51 }
+
+  prvtRsvpProductLabelSetTrapEnable OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "This object is used to enable traps for the Label
+         Set style  oper_status object."
+      DEFVAL { false }
+     ::= { prvtRsvpProductEntry 52 }
+
+  prvtRsvpProductLabelSetChngAct OBJECT-TYPE
+      SYNTAX      Integer32
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Specifies the action to take when the value of
+         prvtRsvpProductLabelSetStyle is changed.
+
+         - leaveLSPs:  All nodes should suppress refreshes and
+         switch to the new format while refreshes are suppressed.
+
+         - tearLSPs:   Any LSPs using label sets will be deleted
+         before switching all nodes to the new format, and any new
+         LSPs using label sets will be dropped/rejected until the
+         switch is complete."
+      DEFVAL { 1 }
+     ::= { prvtRsvpProductEntry 53 }
+
+  prvtRsvpProductExtPrtAdminStatus OBJECT-TYPE
+      SYNTAX      PrvtRsvpAdminStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+       "The desired operational state of support for the extended
+        PROTECTION object defined in
+        draft-lang-ccamp-gmpls-recovery-e2e-signaling."
+      DEFVAL { down }
+     ::= { prvtRsvpProductEntry 54 }
+
+  prvtRsvpProductUniIncSonetProfile OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..1)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Specifies whether Sonet Profile is included on messages
+         to or from a UNI-C node."
+      DEFVAL { 0 }
+     ::= { prvtRsvpProductEntry 55 }
+
+  prvtRsvpProductFrrFacAdminStatus OBJECT-TYPE
+      SYNTAX      PrvtRsvpAdminStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Specifies whether backup LSPs can be put in place for LSPs
+         requesting FRR using the facility method.
+
+         Setting this to UP means that LSPs that request FRR using
+         the facility method can have protection at this node.
+         Existing LSPs that request FRR facility protection will have
+         protection put in place when the next Path refresh is
+         received.
+
+         Setting this to DOWN means that LSPs that request FRR using
+         the facility method will not be protected at this node.
+         Existing LSPs that have FRR facility protection will lose
+         that protection, and if the LSP had been rerouted to use the
+         backup LSP then the protected LSP will be lost.
+
+         This field replaces the bypassFastReroute flag on the protocol
+         extensions field in this MIB (although the bypassFastReroute flag
+         is still supported for backwards compatibility). It can be
+         modified while RSVP is oper_status UP or DOWN.  When this field
+         is changed the bypassFastReroute flag is automatically modified
+         to mirror the change."
+
+      DEFVAL { down }
+     ::= { prvtRsvpProductEntry 56 }
+
+  prvtRsvpProductFrrFacOperStatus OBJECT-TYPE
+      SYNTAX      PrvtRsvpOperStatus
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+         "The current operational status for FRR Facility support.
+         When this is UP backup LSPs will be put in place, when this
+         is down backup LSPs will not be put in place and there will
+         be no LSPs that have backup LSPs."
+     ::= { prvtRsvpProductEntry 57 }
+
+  prvtRsvpProductIpv6AdminStatus OBJECT-TYPE
+      SYNTAX      PrvtRsvpAdminStatus
+      MAX-ACCESS  read-write
+      STATUS      current
+      DESCRIPTION
+        "Specifies whether the local node supports IPv6 LSPs.
+
+         Setting this to UP means that this node supports IPv6 LSPs
+         being set up to, from and through this node.
+
+         Setting this to DOWN means that IPv6 LSPs are NOT supported by
+         this node.  Existing IPv6 LSPs for which this node is the
+         ingress, egress or transit are torn down.
+
+         This field can be modified while RSVP is oper_status UP or
+         DOWN.
+
+         The value of this field MUST match the value of the
+         dcMplsTeMibRsvpIpv6AdminStatus field in the
+         prvtMplsTeMibEntityTable."
+
+      DEFVAL { down }
+     ::= { prvtRsvpProductEntry 58 }
+
+  prvtRsvpProductIpv6OperStatus OBJECT-TYPE
+      SYNTAX      PrvtRsvpOperStatus
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+        "The current operational status for IPv6 support.  When
+         this is UP IPv6 LSPs can be set up to from or through this
+         node.  When this is down there will be no active IPv6 LSPs."
+     ::= { prvtRsvpProductEntry 59 }
+
+  prvtRsvpProductAPIIpv6Address OBJECT-TYPE
+      SYNTAX      InetAddressIPv6
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+        "Management assigned IPv6 address used to identify the
+         (internal) LRAPI interface between RSVP and TE-MIB
+         components.
+
+         The configured API IPv6 address MUST not be a real address
+         in the network.  It is recommended that this is set to a
+         non-zero reserved address value.  This MUST be an address
+         with global scope.
+
+         If multi-stack support is set to PHOP, this address must
+         be unique for each RSVP stack in the node.
+
+         The same address(es) can be used on all nodes in the
+         network."
+     ::= { prvtRsvpProductEntry 60 }
+
+-- Diagnostics table
+-- This table is used to control diagnostic requests and responses.
+
+  prvtRsvpDiagnosticTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF PrvtRsvpDiagnosticEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The table of sessions that are being diagnosed."
+     ::= { prvtRsvpObjects 2 }
+
+  prvtRsvpDiagnosticEntry OBJECT-TYPE
+      SYNTAX      PrvtRsvpDiagnosticEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Each entry represents a session that is being diagnosed."
+      INDEX { prvtRsvpDiagProductIndex,
+              prvtRsvpDiagRequestIndex }
+     ::= { prvtRsvpDiagnosticTable 1 }
+
+  PrvtRsvpDiagnosticEntry ::= SEQUENCE {
+          prvtRsvpDiagProductIndex               PrvtRsvpIndex,
+          prvtRsvpDiagRequestIndex               PrvtRsvpDiagReqIndex,
+          prvtRsvpDiagReqsInProgress             Unsigned32,
+          prvtRsvpDiagSessionEndPoint            IpAddress,
+          prvtRsvpDiagSessionTunnelId            Unsigned32,
+          prvtRsvpDiagSessionExtTunnelId         Unsigned32,
+          prvtRsvpDiagLastHop                    IpAddress,
+          prvtRsvpDiagSender                     IpAddress,
+          prvtRsvpDiagMaxHops                    Integer32,
+          prvtRsvpDiagHopByHopReply              TruthValue
+          -- prvtRsvpDiagRowStatus                  RowStatus
+      }
+
+  prvtRsvpDiagProductIndex OBJECT-TYPE
+      SYNTAX      PrvtRsvpIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The index of the PRVT-RSVP product that is handling this query."
+     ::= { prvtRsvpDiagnosticEntry 1 }
+
+  prvtRsvpDiagRequestIndex OBJECT-TYPE
+      SYNTAX      PrvtRsvpDiagReqIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The index of this prvtRsvpDiagnosticEntry.  This corresponds to a
+           particular session being diagnosed and is an arbitrary value,
+           defined on row creation."
+     ::= { prvtRsvpDiagnosticEntry 2 }
+
+  prvtRsvpDiagReqsInProgress OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The number of outstanding diagnostic requests relating to this
+           session."
+     ::= { prvtRsvpDiagnosticEntry 3 }
+
+  prvtRsvpDiagSessionEndPoint OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The IP address of the tunnel end point, from the LSP_TUNNEL_IPv4
+           session object."
+     ::= { prvtRsvpDiagnosticEntry 4 }
+
+  prvtRsvpDiagSessionTunnelId OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The tunnel ID, from the LSP_TUNNEL_IPv4 session object."
+     ::= { prvtRsvpDiagnosticEntry 5 }
+
+  prvtRsvpDiagSessionExtTunnelId OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The extended tunnel ID, from the LSP_TUNNEL_IPv4 session object."
+     ::= { prvtRsvpDiagnosticEntry 6 }
+
+  prvtRsvpDiagLastHop OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The IP address of the last hop to be queried. This is the address
+           to which the DREQ message is first sent."
+     ::= { prvtRsvpDiagnosticEntry 7 }
+
+  prvtRsvpDiagSender OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The IP address of the sender for the specified session."
+     ::= { prvtRsvpDiagnosticEntry 8 }
+
+  prvtRsvpDiagMaxHops OBJECT-TYPE
+      SYNTAX      Integer32 (0..255)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The maximum number of hops to diagnose."
+     ::= { prvtRsvpDiagnosticEntry 9 }
+
+  prvtRsvpDiagHopByHopReply OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "A flag to indicate that DREPs should be returned hop-by-
+          hop using the reverse of the path taken by the DREQ."
+     ::= { prvtRsvpDiagnosticEntry 10 }
+
+  -- prvtRsvpDiagRowStatus OBJECT-TYPE
+  --     SYNTAX      RowStatus
+  --     MAX-ACCESS  read-only
+  --     STATUS      current
+  --     DESCRIPTION
+  --      "Used to create or delete a PRVT-RSVP Diagnostic Table entry."
+  --    ::= { prvtRsvpDiagnosticEntry 11 }
+
+
+-- Diagnostic node table
+-- This table is used to present diagnostic information about nodes in a session.
+
+  prvtRsvpDiagNodeTable OBJECT-TYPE
+      SYNTAX      SEQUENCE OF PrvtRsvpDiagNodeEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The table of nodes within a session that is being diagnosed.
+
+           External management can extract information
+           from this table, but cannot modify information in it."
+
+     ::= { prvtRsvpObjects 3 }
+
+  prvtRsvpDiagNodeEntry OBJECT-TYPE
+      SYNTAX      PrvtRsvpDiagNodeEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Each entry represents a node within a session that is being diagnosed."
+      INDEX { prvtRsvpDiagNodeProductIndex,
+              prvtRsvpDiagNodeRequestIndex,
+              prvtRsvpDiagNodeIndex }
+     ::= { prvtRsvpDiagNodeTable 1 }
+
+  PrvtRsvpDiagNodeEntry ::= SEQUENCE {
+          prvtRsvpDiagNodeProductIndex           PrvtRsvpIndex,
+          prvtRsvpDiagNodeRequestIndex           PrvtRsvpDiagReqIndex,
+          prvtRsvpDiagNodeIndex                  PrvtRsvpDiagNodeIndexType,
+          prvtRsvpDiagNodeType                   PrvtRsvpDiagNodeTypeVal,
+          -- Below is the information that is returned in a DIAG_RESPONSE
+          prvtRsvpDiagNodeDreqArrivalTime        Unsigned32,
+          prvtRsvpDiagNodeIncomingIfAddr         IpAddress,
+          prvtRsvpDiagNodeOutgoingIfAddr         IpAddress,
+          prvtRsvpDiagNodePrevHopAddr            IpAddress,
+          prvtRsvpDiagNodeDTTL                   Integer32,
+          prvtRsvpDiagNodeMFlag                  TruthValue,
+          prvtRsvpDiagNodeRErr                   Integer32,
+          prvtRsvpDiagNodeKValue                 Integer32,
+          prvtRsvpDiagNodeTimerValue             Integer32,
+          -- Below are the objects that can be appended to a DIAG_RESPONSE
+          prvtRsvpDiagRsvpHopAddr                IpAddress,
+          prvtRsvpDiagRsvpHopLIH                 Unsigned32,
+          prvtRsvpDiagSenderTpltAddress          IpAddress,
+          prvtRsvpDiagSenderTpltLSPId            Integer32,
+          -- Info from SENDER_TSPEC and ADSPEC is covered by FLOWSPEC
+          prvtRsvpDiagFlowSpecCLBktRate          Unsigned32,
+          prvtRsvpDiagFlowSpecCLBktDep           Unsigned32,
+          prvtRsvpDiagFlowSpecCLPkDataRate       Unsigned32,
+          prvtRsvpDiagFlowSpecCLMinPolUnit       Unsigned32,
+          prvtRsvpDiagFlowSpecCLMaxPktSize       Unsigned32,
+          prvtRsvpDiagFlowSpecGQBktRate          Unsigned32,
+          prvtRsvpDiagFlowSpecGQBktDep           Unsigned32,
+          prvtRsvpDiagFlowSpecGQPkDataRate       Unsigned32,
+          prvtRsvpDiagFlowSpecGQMinPolUnit       Unsigned32,
+          prvtRsvpDiagFlowSpecGQMaxPktSize       Unsigned32,
+          prvtRsvpDiagFlowSpecGQRate             Unsigned32,
+          prvtRsvpDiagFlowSpecGQSlack            Unsigned32,
+          prvtRsvpDiagFlowSpecCoSCoS             Integer32,
+          prvtRsvpDiagFlowSpecCoSMTU             Integer32,
+          prvtRsvpDiagFilterSpecAddress          IpAddress,
+          prvtRsvpDiagFilterSpecLSPId            Integer32,
+          prvtRsvpDiagConfirmRcvAddr             IpAddress,
+          prvtRsvpDiagStyle                      Unsigned32
+          -- The SCOPE object is omitted
+      }
+
+  prvtRsvpDiagNodeProductIndex OBJECT-TYPE
+      SYNTAX      PrvtRsvpIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The index of the PRVT-RSVP product that is handling this query."
+     ::= { prvtRsvpDiagNodeEntry 1 }
+
+  prvtRsvpDiagNodeRequestIndex OBJECT-TYPE
+      SYNTAX      PrvtRsvpDiagReqIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The index of the corresponding request in prvtRsvpDiagnosticTable."
+     ::= { prvtRsvpDiagNodeEntry 2 }
+
+  prvtRsvpDiagNodeIndex OBJECT-TYPE
+      SYNTAX      PrvtRsvpDiagNodeIndexType
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The index of this prvtRsvpDiagNodeEntry. This is equivalent to the
+           hop number, with 1 being the ingress."
+     ::= { prvtRsvpDiagNodeEntry 3 }
+
+  prvtRsvpDiagNodeType OBJECT-TYPE
+      SYNTAX      PrvtRsvpDiagNodeTypeVal
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The type of the node: ingress, transit, egress or missing. Missing
+           indicates that no diagnostic response has been received for this
+           node, and this entry may in fact represent more than one node."
+     ::= { prvtRsvpDiagNodeEntry 4 }
+
+  prvtRsvpDiagNodeDreqArrivalTime OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The arrival time of the DREQ at the node, specified as a 32-bit
+           NTP timestamp."
+     ::= { prvtRsvpDiagNodeEntry 5 }
+
+  prvtRsvpDiagNodeIncomingIfAddr OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The IP address of the interface on which message from the sender
+           are expected to arrive at this node, or 0 if unknown."
+     ::= { prvtRsvpDiagNodeEntry 6 }
+
+  prvtRsvpDiagNodeOutgoingIfAddr OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The IP address of the interface through which the DREQ arrived
+           and to which messages flow from the given sender for the
+           specified session address, or 0 if unknown."
+     ::= { prvtRsvpDiagNodeEntry 7 }
+
+  prvtRsvpDiagNodePrevHopAddr OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The IP address from which this node receives RSVP PATH messages
+           for this source, or 0 if unknown. This is also the address to
+           which the DREQ was forwarded."
+     ::= { prvtRsvpDiagNodeEntry 8 }
+
+  prvtRsvpDiagNodeDTTL OBJECT-TYPE
+      SYNTAX      Integer32 (0..255)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The number of IP hops traversed by the DREQ between the downstream
+           RSVP node and this node."
+     ::= { prvtRsvpDiagNodeEntry 9 }
+
+  prvtRsvpDiagNodeMFlag OBJECT-TYPE
+      SYNTAX      TruthValue
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "A flag that indicates whether the reservation described by the
+           response objects is merged with reservations from other downstream
+           interfaces before being forwarded upstream."
+     ::= { prvtRsvpDiagNodeEntry 10 }
+
+  prvtRsvpDiagNodeRErr OBJECT-TYPE
+      SYNTAX      Integer32 (0..7)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The error conditions at this node.
+           Bit 3 indicates ROUTE object too big;
+           Bit 2 indicates packet too big;
+           Bit 1 indicates no PATH state.
+           Bit 1 is the least significant bit."
+     ::= { prvtRsvpDiagNodeEntry 11 }
+
+  prvtRsvpDiagNodeKValue OBJECT-TYPE
+      SYNTAX      Integer32 (0..15)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The refresh timer multiple."
+     ::= { prvtRsvpDiagNodeEntry 12 }
+
+  prvtRsvpDiagNodeTimerValue OBJECT-TYPE
+      SYNTAX      Integer32 (0..65535)
+      UNITS       "seconds"
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The local refresh timer value in seconds."
+     ::= { prvtRsvpDiagNodeEntry 13 }
+
+  prvtRsvpDiagRsvpHopAddr OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The hop address from the session's RSVP_HOP object."
+     ::= { prvtRsvpDiagNodeEntry 14 }
+
+  prvtRsvpDiagRsvpHopLIH OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The LIH from the session's RSVP_HOP object."
+     ::= { prvtRsvpDiagNodeEntry 15 }
+
+  prvtRsvpDiagSenderTpltAddress OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The address from the session's SENDER_TEMPLATE object."
+     ::= { prvtRsvpDiagNodeEntry 16 }
+
+  prvtRsvpDiagSenderTpltLSPId OBJECT-TYPE
+      SYNTAX      Integer32 (0..65535)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The LSP ID from the session's SENDER_TEMPLATE object."
+     ::= { prvtRsvpDiagNodeEntry 17 }
+
+  prvtRsvpDiagFlowSpecCLBktRate OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv controlled load token bucket rate in bytes per second,
+           from the session's FLOWSPEC object.
+           This value is rounded to the nearest integer."
+     ::= { prvtRsvpDiagNodeEntry 18 }
+
+  prvtRsvpDiagFlowSpecCLBktDep OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv controlled load token bucket depth in bytes,
+           from the session's FLOWSPEC object.
+           This value is rounded to the nearest integer."
+     ::= { prvtRsvpDiagNodeEntry 19 }
+
+  prvtRsvpDiagFlowSpecCLPkDataRate OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv controlled load peak data rate in bytes per second,
+           from the session's FLOWSPEC object.
+           This value is rounded to the nearest integer."
+     ::= { prvtRsvpDiagNodeEntry 20 }
+
+  prvtRsvpDiagFlowSpecCLMinPolUnit OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv controlled load minimum policed unit
+           from the session's FLOWSPEC object."
+     ::= { prvtRsvpDiagNodeEntry 21 }
+
+  prvtRsvpDiagFlowSpecCLMaxPktSize OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv controlled load maximum packet size
+           from the session's FLOWSPEC object."
+     ::= { prvtRsvpDiagNodeEntry 22 }
+
+  prvtRsvpDiagFlowSpecGQBktRate OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv guaranteed QoS token bucket rate in bytes per second,
+           from the session's FLOWSPEC object.
+           This value is rounded to the nearest integer."
+     ::= { prvtRsvpDiagNodeEntry 23 }
+
+  prvtRsvpDiagFlowSpecGQBktDep OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv guaranteed QoS token bucket depth in bytes,
+           from the session's FLOWSPEC object.
+           This value is rounded to the nearest integer."
+     ::= { prvtRsvpDiagNodeEntry 24 }
+
+  prvtRsvpDiagFlowSpecGQPkDataRate OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv guaranteed QoS peak data rate in bytes per second,
+           from the session's FLOWSPEC object.
+           This value is rounded to the nearest integer."
+     ::= { prvtRsvpDiagNodeEntry 25 }
+
+  prvtRsvpDiagFlowSpecGQMinPolUnit OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv guaranteed QoS minimum policed unit
+           from the session's FLOWSPEC object."
+     ::= { prvtRsvpDiagNodeEntry 26 }
+
+  prvtRsvpDiagFlowSpecGQMaxPktSize OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv guaranteed QoS maximum packet size
+           from the session's FLOWSPEC object."
+     ::= { prvtRsvpDiagNodeEntry 27 }
+
+  prvtRsvpDiagFlowSpecGQRate OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv guaranteed QoS rate in bytes per second,
+           from the session's FLOWSPEC object.
+           This value is rounded to the nearest integer."
+     ::= { prvtRsvpDiagNodeEntry 28 }
+
+  prvtRsvpDiagFlowSpecGQSlack OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "Int-serv guaranteed QoS slack in microseconds,
+           from the session's FLOWSPEC object."
+     ::= { prvtRsvpDiagNodeEntry 29 }
+
+  prvtRsvpDiagFlowSpecCoSCoS OBJECT-TYPE
+      SYNTAX      Integer32 (0..255)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "CoS class of service from the session's FLOWSPEC object."
+     ::= { prvtRsvpDiagNodeEntry 30 }
+
+  prvtRsvpDiagFlowSpecCoSMTU OBJECT-TYPE
+      SYNTAX      Integer32 (0..65535)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "CoS maximum packet size from the session's FLOWSPEC object."
+     ::= { prvtRsvpDiagNodeEntry 31 }
+
+  prvtRsvpDiagFilterSpecAddress OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The address from the session's FILTER_SPEC object."
+     ::= { prvtRsvpDiagNodeEntry 32 }
+
+  prvtRsvpDiagFilterSpecLSPId OBJECT-TYPE
+      SYNTAX      Integer32 (0..65535)
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The LSP ID from the session's FILTER_SPEC object."
+     ::= { prvtRsvpDiagNodeEntry 33 }
+
+  prvtRsvpDiagConfirmRcvAddr OBJECT-TYPE
+      SYNTAX      IpAddress
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The address from the session's CONFIRM object."
+     ::= { prvtRsvpDiagNodeEntry 34 }
+
+  prvtRsvpDiagStyle OBJECT-TYPE
+      SYNTAX      Unsigned32
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The style word from the session's STYLE object."
+     ::= { prvtRsvpDiagNodeEntry 35 }
+
+-- Module compliance.
+
+-- conformance
+prvtRsvpConformance  OBJECT IDENTIFIER ::= {prvtRsvp 2 }
+
+prvtRsvpCompliances OBJECT IDENTIFIER ::= { prvtRsvpConformance 1 }
+prvtRsvpGroups      OBJECT IDENTIFIER ::= { prvtRsvpConformance 2 }
+
+prvtRsvpCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The compliance statement for the PRVT-RSVP product MIB."
+    MODULE
+
+    GROUP prvtRsvpProductGroup
+    DESCRIPTION
+        "Product Table Objects."
+
+    GROUP prvtRsvpDiagGroup
+    DESCRIPTION
+        "Diagnostic Table Objects."
+
+    GROUP prvtRsvpDiagNodeGroup
+    DESCRIPTION
+        "Diag Node Table Objects."
+
+    ::= { prvtRsvpCompliances 1 }
+
+prvtRsvpProductGroup OBJECT-GROUP
+   OBJECTS {
+      prvtRsvpProductASNumber,
+      prvtRsvpProductSenderTTL,
+      prvtRsvpProductMinTimerPeriod,
+      prvtRsvpProductAPIIfIndex,
+      prvtRsvpProductAPIAddress,
+      prvtRsvpProductAPIRefreshInterval,
+      prvtRsvpProductLocalRepairDelay,
+      prvtRsvpProductRefreshInterval,
+      prvtRsvpProductRefreshMultiple,
+      prvtRsvpProductRfrshSlewDenom,
+      prvtRsvpProductRfrshSlewNumerator,
+      prvtRsvpProductBlockadeMultiple,
+      prvtRsvpProductSocketBufPoolSize,
+      prvtRsvpProductSwitchBufPoolSize,
+      prvtRsvpProductTeMibBufPoolSize,
+      prvtRsvpProductRoutingBufPoolSize,
+      prvtRsvpProductLSPSetupPriority,
+      prvtRsvpProductLSPHoldingPriority,
+      prvtRsvpProductAdminStatus,
+      prvtRsvpProductOperStatus,
+      prvtRsvpProductRowStatus,
+      prvtRsvpProductLsrIndex,
+      prvtRsvpProductTeMibIndex,
+      prvtRsvpProductMultiStackSupport,
+      prvtRsvpProductUseHopByHop,
+      prvtRsvpProductUseNotify,
+      prvtRsvpProductNotifyRRDecay,
+      prvtRsvpProductNotifyRRInterval,
+      prvtRsvpProductNotifyRRLimit,
+      prvtRsvpProductAllowIPEncap,
+      prvtRsvpProductProtocolExtensions,
+      prvtRsvpProductPSRFlags,
+      prvtRsvpProductInitPathRRDecay,
+      prvtRsvpProductInitPathRRInterval,
+      prvtRsvpProductInitPathRRLimit,
+      prvtRsvpProductEnableUni,
+      prvtRsvpProductRestartCapable,
+      prvtRsvpProductRestartTime,
+      prvtRsvpProductRecoveryTime,
+      prvtRsvpProductMinPeerRestart,
+      prvtRsvpProductGracefulDelTimeout,
+      prvtRsvpProductEgressDelBehavior,
+      prvtRsvpProductEnabUniConnSplicing,
+      prvtRsvpProductFastRerouteCaps,
+      prvtRsvpProductFastRroutBkpRtryInt,
+      prvtRsvpProductErrorActionFlags,
+      prvtRsvpProductEnableNni,
+      prvtRsvpProductBehaviorFlags,
+      prvtRsvpProductLabelSetStyle,
+      prvtRsvpProductLabelSetOperStatus,
+      prvtRsvpProductLabelSetTrapEnable,
+      prvtRsvpProductLabelSetChngAct,
+      prvtRsvpProductExtPrtAdminStatus,
+      prvtRsvpProductUniIncSonetProfile,
+      prvtRsvpProductFrrFacAdminStatus,
+      prvtRsvpProductFrrFacOperStatus,
+      prvtRsvpProductIpv6AdminStatus,
+      prvtRsvpProductIpv6OperStatus,
+      prvtRsvpProductAPIIpv6Address
+    }
+    STATUS  current
+    DESCRIPTION
+           "Product Table Objects."
+    ::= { prvtRsvpGroups 2 }
+
+prvtRsvpDiagGroup OBJECT-GROUP
+   OBJECTS {
+      prvtRsvpDiagReqsInProgress,
+      prvtRsvpDiagSessionEndPoint,
+      prvtRsvpDiagSessionTunnelId,
+      prvtRsvpDiagSessionExtTunnelId,
+      prvtRsvpDiagLastHop,
+      prvtRsvpDiagSender,
+      prvtRsvpDiagMaxHops,
+      prvtRsvpDiagHopByHopReply
+      -- prvtRsvpDiagRowStatus
+    }
+    STATUS  current
+    DESCRIPTION
+           "Diagnostic Table Objects."
+    ::= { prvtRsvpGroups 3 }
+
+prvtRsvpDiagNodeGroup OBJECT-GROUP
+   OBJECTS {
+      prvtRsvpDiagNodeType,
+      prvtRsvpDiagNodeDreqArrivalTime,
+      prvtRsvpDiagNodeIncomingIfAddr,
+      prvtRsvpDiagNodeOutgoingIfAddr,
+      prvtRsvpDiagNodePrevHopAddr,
+      prvtRsvpDiagNodeDTTL,
+      prvtRsvpDiagNodeMFlag,
+      prvtRsvpDiagNodeRErr,
+      prvtRsvpDiagNodeKValue,
+      prvtRsvpDiagNodeTimerValue,
+      prvtRsvpDiagRsvpHopAddr,
+      prvtRsvpDiagRsvpHopLIH,
+      prvtRsvpDiagSenderTpltLSPId,
+      prvtRsvpDiagSenderTpltAddress,
+      prvtRsvpDiagFlowSpecCLBktRate,
+      prvtRsvpDiagFlowSpecCLBktDep,
+      prvtRsvpDiagFlowSpecCLPkDataRate,
+      prvtRsvpDiagFlowSpecCLMinPolUnit,
+      prvtRsvpDiagFlowSpecCLMaxPktSize,
+      prvtRsvpDiagFlowSpecGQBktRate,
+      prvtRsvpDiagFlowSpecGQBktDep,
+      prvtRsvpDiagFlowSpecGQPkDataRate,
+      prvtRsvpDiagFlowSpecGQMinPolUnit,
+      prvtRsvpDiagFlowSpecGQMaxPktSize,
+      prvtRsvpDiagFlowSpecGQRate,
+      prvtRsvpDiagFlowSpecGQSlack,
+      prvtRsvpDiagFlowSpecCoSCoS,
+      prvtRsvpDiagFlowSpecCoSMTU,
+      prvtRsvpDiagFilterSpecAddress,
+      prvtRsvpDiagFilterSpecLSPId,
+      prvtRsvpDiagConfirmRcvAddr,
+      prvtRsvpDiagStyle
+    }
+    STATUS  current
+    DESCRIPTION
+           "Diag Node Table Objects."
+    ::= { prvtRsvpGroups 4 }
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-SAA-MIB b/MIBS/telco-systems/binos/PRVT-SAA-MIB
new file mode 100644
index 0000000..8a9c4be
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SAA-MIB
@@ -0,0 +1,2105 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-SAA-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-SAA-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, NOTIFICATION-TYPE,
+    IpAddress, Integer32, Counter64
+        FROM SNMPv2-SMI                  -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP       
+        FROM SNMPv2-CONF                 -- [RFC2580]
+    RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC                   -- [RFC2579]
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB          -- [RFC2571]
+    switch
+ 	FROM PRVT-SWITCH-MIB;
+
+prvtSaaMib MODULE-IDENTITY
+LAST-UPDATED "201503250000Z"
+ORGANIZATION "BATM Advanced Communication"       
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB provides the extended capability of controlling and 
+provisioning various OAM tests and SAA monitoring.
+It adds extra functionality for DISMAN-PING-MIB"
+-- revision history
+        REVISION       "201503250000Z"
+        DESCRIPTION
+        "Add CountAllPriorities leaf to SAA Throughput tests."
+-- revision history
+        REVISION       "201405160000Z"
+        DESCRIPTION
+        "Add twamp tests."     
+-- revision history
+        REVISION       "201110200000Z"
+        DESCRIPTION
+        "Add ethertype leaf to SAA Throughput tests."
+-- revision history
+        REVISION       "201102070000Z"
+        DESCRIPTION
+        "Add delays to SAA Throughput tests."
+-- revision history
+        REVISION       "201009290000Z"
+        DESCRIPTION
+        "Add name leaf to profile table."
+-- revision history
+        REVISION       "201009270000Z"
+        DESCRIPTION
+        "Add measurement units for prvtSaaY1731TestResultCompletionTime, fix range for prvtSaaY1731PmTestEncapValue."
+-- revision history
+        REVISION       "201009130000Z"
+        DESCRIPTION
+        "Add decription for percentile values for jitter and delay in case of outside 1-100 range."
+-- revision history
+        REVISION       "201008240000Z"
+        DESCRIPTION
+        "Fix prvtSaaY1731PmTestMonitorInterval range and default value."
+-- revision history
+	REVISION       "201005050000Z"
+	DESCRIPTION
+	"Add prvtSaaY1731LoopbackTestTable."
+-- revision history
+	REVISION       "201003260000Z"
+	DESCRIPTION
+	"Add prvtSaaY1731PmTestProfile description if retued value is 0."
+-- revision history
+	REVISION       "201003180000Z"
+	DESCRIPTION
+	"Add detailed description and measurement units on some test result leafs."
+-- revision history
+	REVISION       "201003120000Z"
+	DESCRIPTION
+	"Clarify description on several leafs."
+-- revision history
+	REVISION       "201001110000Z"
+	DESCRIPTION
+	"Initial version."
+
+::= { switch 130 }
+
+-- ***********************************************
+-- ************ Top level structure of the MIB****
+-- ***********************************************
+ prvtSaaNotifications              OBJECT IDENTIFIER ::= { prvtSaaMib 0 }
+ prvtSaaObjects                    OBJECT IDENTIFIER ::= { prvtSaaMib 1 }
+ prvtSaaConformance                OBJECT IDENTIFIER ::= { prvtSaaMib 2 }
+
+prvtSaaTest OBJECT IDENTIFIER ::= { prvtSaaObjects 1 }
+prvtSaaTestResult OBJECT IDENTIFIER ::= { prvtSaaObjects 2 }
+prvtSaaProfiles OBJECT IDENTIFIER ::= { prvtSaaObjects 3 }
+
+-- ***********************************************
+-- ************* global scalar objects ***********
+-- ***********************************************
+
+-- ***********************************************
+-- *************** Y1731 PM TEST *****************
+-- ***********************************************
+
+prvtSaaY1731PmTestTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtSaaY1731PmTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table holds the configuration for a SAA Y1731 test"
+    ::= { prvtSaaTest 1 }
+
+prvtSaaY1731PmTestEntry OBJECT-TYPE
+	SYNTAX PrvtSaaY1731PmTestEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"NONE"
+	INDEX {
+		prvtSaaY1731PmTestOwner,
+		prvtSaaY1731PmTestName
+              }
+	::= { prvtSaaY1731PmTestTable 1 }
+
+PrvtSaaY1731PmTestEntry ::= SEQUENCE {
+	prvtSaaY1731PmTestOwner				SnmpAdminString,
+	prvtSaaY1731PmTestName				SnmpAdminString,
+	prvtSaaY1731PmTestType 				INTEGER,
+	prvtSaaY1731PmTestExecStatus			INTEGER,
+	prvtSaaY1731PmTestEncapType			INTEGER,
+	prvtSaaY1731PmTestEncapValue			Unsigned32,
+	prvtSaaY1731PmTestUserPort			Unsigned32,
+	prvtSaaY1731PmTestUplinkPort			Unsigned32,
+	prvtSaaY1731PmTestTargetMac			DisplayString,
+	prvtSaaY1731PmTestCfmDomainLevel		Unsigned32,
+	prvtSaaY1731PmTestRemoteCfmMep			Unsigned32,
+	prvtSaaY1731PmTestProfile			Unsigned32,
+	prvtSaaY1731PmTestHistoryDepth			Unsigned32,
+	prvtSaaY1731PmTestPeriod			Unsigned32,
+	prvtSaaY1731PmTestTimeout			Unsigned32,
+	prvtSaaY1731PmTestMonitorInterval		Unsigned32,
+	prvtSaaY1731PmTestFrequency			Unsigned32,
+	prvtSaaY1731PmTestClocksInSync			TruthValue,
+	prvtSaaY1731PmTestDelayMethod			INTEGER,
+	prvtSaaY1731PmTestDelayPvalue			Unsigned32,
+	prvtSaaY1731PmTestJitterMethod			INTEGER,
+	prvtSaaY1731PmTestJitterPvalue			Unsigned32,
+	prvtSaaY1731PmTestPriority			Unsigned32,
+	prvtSaaY1731PmTestRowStatus			RowStatus,
+	prvtSaaY1731PmTestCCMAPSCount          TruthValue,
+	prvtSaaY1731PmTestLossMeasurementType INTEGER,
+	prvtSaaY1731PmTestSLMTransmit 		TruthValue,
+	prvtSaaY1731PmTestTestId             Unsigned32,
+	prvtSaaY1731PmTestDropEligible      TruthValue,
+	prvtSaaY1731PmTestDataSize            Unsigned32,
+	prvtSaaY1731PmTestCountAllPriorities         TruthValue
+
+
+}
+
+prvtSaaY1731PmTestOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This string is used to describe the owner of the
+       Y1731 Pm SAA test."
+    ::= { prvtSaaY1731PmTestEntry 1 }
+
+prvtSaaY1731PmTestName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This string is used to describe the test name for the
+       Y1731 Pm SAA test. It is also used as a test identifier."
+    ::= { prvtSaaY1731PmTestEntry 2 }
+
+prvtSaaY1731PmTestType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		frameloss ( 1 ),
+		framedelayAndDelayvariation ( 2 ),
+                framelossAndFramedelayAndDelayvariation ( 3 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA Y1731 Pm test type."
+	::= { prvtSaaY1731PmTestEntry 3 }
+
+prvtSaaY1731PmTestExecStatus OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+		notRunning ( 1 ),
+		running ( 2 )
+	}
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"SAA Y1731 Pm test execution status."
+	DEFVAL { notRunning }
+	::= { prvtSaaY1731PmTestEntry 4 }
+
+prvtSaaY1731PmTestEncapType OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+		none	( 1 ),
+		service ( 2 ),
+		vlan	( 3 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA Y1731 Pm test encapsulation type.
+	It can be either test over VLAN or test over Service.
+	The value 1 is the default value representing that neither
+	type is set."
+	DEFVAL { none }
+	::= { prvtSaaY1731PmTestEntry 5 }
+
+prvtSaaY1731PmTestEncapValue OBJECT-TYPE
+        SYNTAX Unsigned32 (1..4294967295)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The value of the defined SAA Y1731 Pm test encapsulation.
+	It should be either the Vlan ID or the Service ID, depending 
+	on the type set in prvtSaaY1731PmTestEncapType."
+	::= { prvtSaaY1731PmTestEntry 6 }
+
+prvtSaaY1731PmTestUserPort OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"For SAA Y1731 Pm test, this leaf is used only in case the encapsulation 
+	is VLAN type and it determines the port on which the user is connected."
+	::= { prvtSaaY1731PmTestEntry 7 }
+
+prvtSaaY1731PmTestUplinkPort OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"For SAA Y1731 Pm test, this leaf is used only in case the encapsulation 
+	is VLAN type and it determines the port that the SAA test devices are 
+	connected through."
+	::= { prvtSaaY1731PmTestEntry 8 }
+
+prvtSaaY1731PmTestTargetMac OBJECT-TYPE
+	SYNTAX DisplayString (SIZE(17))
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The target MAC address for the SAA Y1731 test."
+	::= { prvtSaaY1731PmTestEntry 9 }
+
+prvtSaaY1731PmTestCfmDomainLevel OBJECT-TYPE
+	SYNTAX Unsigned32 (0..7)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"CFM Domain level on which the test will be run."
+	::= { prvtSaaY1731PmTestEntry 10 }
+
+prvtSaaY1731PmTestRemoteCfmMep OBJECT-TYPE
+	SYNTAX Unsigned32 (0..8191)
+        MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The remote MEP associated with target MAC."
+	::= { prvtSaaY1731PmTestEntry 11 }
+
+prvtSaaY1731PmTestProfile OBJECT-TYPE
+	SYNTAX Unsigned32 (0|1..2147483647)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The profile ID associated to the SAA Y1731 Pm test.
+	 A value of 0 depicts no set profile."
+	::= { prvtSaaY1731PmTestEntry 12 }
+
+prvtSaaY1731PmTestHistoryDepth OBJECT-TYPE
+	SYNTAX Unsigned32 (1..120)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Probe history count."
+	DEFVAL { 96 }
+	::= { prvtSaaY1731PmTestEntry 13 }
+
+prvtSaaY1731PmTestPeriod OBJECT-TYPE
+	SYNTAX Unsigned32 (100..10000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The period the SAA Y1731 Pm test will run, in milliseconds."
+	DEFVAL { 1000 }
+	::= { prvtSaaY1731PmTestEntry 14 }
+
+prvtSaaY1731PmTestTimeout OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The timeout period for a test packet."
+	DEFVAL { 3 }
+	::= { prvtSaaY1731PmTestEntry 15 }
+
+prvtSaaY1731PmTestMonitorInterval OBJECT-TYPE
+        SYNTAX Unsigned32 (1..60)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Monitoring interval is relevant only for continous Y1731 test.
+        It is measured in minutes."
+        DEFVAL { 15 }
+	::= { prvtSaaY1731PmTestEntry 16 }
+
+prvtSaaY1731PmTestFrequency OBJECT-TYPE
+	SYNTAX Unsigned32 (0..65535)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The time between two consecutive intervals.
+	A value of 1 defines a delay of a second between the end of the first 
+	and the begining of the next interval."
+	DEFVAL { 0 }
+	::= { prvtSaaY1731PmTestEntry 17 }
+
+prvtSaaY1731PmTestClocksInSync OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"This variable tells if the clocks of the test are syncronized."
+	DEFVAL { false }
+	::= { prvtSaaY1731PmTestEntry 18 }
+
+prvtSaaY1731PmTestDelayMethod OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		average ( 1 ),
+		percentile ( 2 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Defines the method of calculating delay on a Y1731 test."
+	::= { prvtSaaY1731PmTestEntry 19 }
+
+prvtSaaY1731PmTestDelayPvalue OBJECT-TYPE
+	SYNTAX Unsigned32 (1..100)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Percent used to calculate delay in p-percentile method. 
+	 Reported delay is the percent-th member in the array with sorted delays. 
+         Relevant only for p-percentile method.
+         Value in range of 1-100 is for percentile delay method of calculation.
+         Value 101 describes that average delay method of calculation is used.
+         Only values inside the 1..100 range can be set to this parameter."
+	::= { prvtSaaY1731PmTestEntry 20 }
+
+prvtSaaY1731PmTestJitterMethod OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		peakToPeak ( 1 ),
+                variance ( 2 ),
+		percentile ( 3 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Defines the method of calculating jitter on a Y1731 test."
+	::= { prvtSaaY1731PmTestEntry 21 }
+
+prvtSaaY1731PmTestJitterPvalue OBJECT-TYPE
+	SYNTAX Unsigned32 (1..100)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Percent used to calculate jitter in p-percentile method. 
+	 Reported jitter is the percent-th member in the array with sorted jitters. 
+         Relevant only for p-percentile method.
+         Value in range of 1..100 is for percentile jitter method of calculation.
+         Value 101 describes that peakToPeak jitter method of calculation is used.
+         Value 102 describes that variance jitter method of calculation is used.
+         Only values inside the 1..100 range can be set to this parameter."
+	::= { prvtSaaY1731PmTestEntry 22 }
+
+prvtSaaY1731PmTestPriority OBJECT-TYPE
+	SYNTAX Unsigned32 (0..7)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Defines the priority of the packets sent by the SAA Y1731 Pm test
+	(priority to count user traffic)."
+	::= { prvtSaaY1731PmTestEntry 23 }
+
+
+prvtSaaY1731PmTestRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"The status of the row.
+	 The writable columns in a row can not be changed if the row
+	 is active. Certain columns must have a valid value before a row
+	 can be activated."
+	::= { prvtSaaY1731PmTestEntry 24 }
+
+prvtSaaY1731PmTestCCMAPSCount OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not."
+	DEFVAL { false }
+	::= { prvtSaaY1731PmTestEntry 25 }
+
+prvtSaaY1731PmTestLossMeasurementType  OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		lmm ( 0 ),
+		slm ( 1 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"If set to 1 Synthetic Loss Measurement will be used for frame-loss calculations.If set 0 user packets will be used for frame-loss calculations"
+	DEFVAL { 0 }
+	::= { prvtSaaY1731PmTestEntry 26 }	
+
+prvtSaaY1731PmTestSLMTransmit                      OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"If set true the device is capable of sending SLM packets and frame-loss calculations. This must be used only when loss measurement type is SLM"
+	DEFVAL { false }
+	::= { prvtSaaY1731PmTestEntry 27 }
+	
+prvtSaaY1731PmTestTestId                  OBJECT-TYPE
+	SYNTAX Unsigned32 (0..4095)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Specify the unique test id used in Y1731 SLM. 0 means not set.It is mandatory for the Y1731 SLM test"
+	DEFVAL { 0 }
+	::= { prvtSaaY1731PmTestEntry 28 }
+	
+prvtSaaY1731PmTestDropEligible OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Drop Eligible flag for S-VLAN used for the Y1731 SLM  test."
+	DEFVAL { false }
+	::= { prvtSaaY1731PmTestEntry 29 }
+	
+prvtSaaY1731PmTestDataSize                OBJECT-TYPE
+	SYNTAX  Unsigned32 (64..1518)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Packet sizes for Y1731 SLM test"
+	DEFVAL { 64 }
+	::= { prvtSaaY1731PmTestEntry  30 }
+
+prvtSaaY1731PmTestCountAllPriorities OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Measure for all priorities."
+	DEFVAL { false }
+	::= { prvtSaaY1731PmTestEntry 31 }
+
+-- ***********************************************
+-- **************** RFC2544 TEST *****************
+-- ***********************************************
+prvtSaaRFC2544ThroughputTestTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtSaaRFC2544ThroughputTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table holds the configuration for a SAA RFC2544 test"
+    ::= { prvtSaaTest 2 }
+
+prvtSaaRFC2544ThroughputTestEntry OBJECT-TYPE
+	SYNTAX PrvtSaaRFC2544ThroughputTestEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"NONE"
+	INDEX {
+		prvtSaaRFC2544ThroughputTestOwner,
+		prvtSaaRFC2544ThroughputTestName
+              }
+	::= { prvtSaaRFC2544ThroughputTestTable 1 }
+
+PrvtSaaRFC2544ThroughputTestEntry ::= SEQUENCE {
+	prvtSaaRFC2544ThroughputTestOwner		SnmpAdminString,
+	prvtSaaRFC2544ThroughputTestName		SnmpAdminString,
+        prvtSaaRFC2544ThroughputTestType 		INTEGER,
+	prvtSaaRFC2544ThroughputTestExecStatus		INTEGER,
+	prvtSaaRFC2544ThroughputTestSourceType		INTEGER,
+        prvtSaaRFC2544ThroughputTestSource		OCTET STRING,
+        prvtSaaRFC2544ThroughputTestTargetType		INTEGER,
+        prvtSaaRFC2544ThroughputTestTarget		OCTET STRING,
+	prvtSaaRFC2544ThroughputTestTimeout		Unsigned32,
+        prvtSaaRFC2544ThroughputTestCIR			Unsigned32,
+        prvtSaaRFC2544ThroughputTestCBS			Unsigned32,
+	prvtSaaRFC2544ThroughputTestBurstPercentage	Unsigned32,
+	prvtSaaRFC2544ThroughputTestDuration		Unsigned32,
+	prvtSaaRFC2544ThroughputTestMaxFrameloss	Unsigned32,
+        prvtSaaRFC2544ThroughputTestCVLAN0		Unsigned32,
+	prvtSaaRFC2544ThroughputTestCVLAN0Priority	Unsigned32,
+	prvtSaaRFC2544ThroughputTestCVLAN0DropEligible	TruthValue,
+	prvtSaaRFC2544ThroughputTestSVLAN		Unsigned32,
+	prvtSaaRFC2544ThroughputTestSVLANPriority	Unsigned32,
+	prvtSaaRFC2544ThroughputTestSVLANDropEligible	TruthValue,
+	prvtSaaRFC2544ThroughputTestPDUSize		DisplayString,
+	prvtSaaRFC2544ThroughputTestACKTimeout		Unsigned32,
+	prvtSaaRFC2544ThroughputTestLoopbackType 	INTEGER,
+	prvtSaaRFC2544ThroughputTestPaternType 		INTEGER,
+	prvtSaaRFC2544ThroughputTestRowStatus		RowStatus,
+	prvtSaaRFC2544ThroughputTestEthertype       OCTET STRING
+}
+
+prvtSaaRFC2544ThroughputTestOwner OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This string is used to describe the owner of the
+       RFC2544 SAA test."
+    ::= { prvtSaaRFC2544ThroughputTestEntry 1 }
+
+prvtSaaRFC2544ThroughputTestName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This string is used to describe the test name for the
+       RFC2544 SAA test. It is also used as a test identifier."
+    ::= { prvtSaaRFC2544ThroughputTestEntry 2 }
+
+prvtSaaRFC2544ThroughputTestType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		unidirectionalTestHead( 1 ),
+                bidirectionalTestHead ( 2 ),
+		testTail( 3 ),
+		testLoopback( 4 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput test type"
+	::= { prvtSaaRFC2544ThroughputTestEntry 3 }
+
+prvtSaaRFC2544ThroughputTestExecStatus OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+		notRunning ( 1 ),
+		running ( 2 )
+	}
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput test execution status."
+	DEFVAL { notRunning }
+	::= { prvtSaaRFC2544ThroughputTestEntry 4 }
+
+
+prvtSaaRFC2544ThroughputTestSourceType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		none( 0 ),
+		mac ( 1 ),
+		mep ( 2 )
+	}
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput test source type."
+	::= { prvtSaaRFC2544ThroughputTestEntry 5 }
+
+prvtSaaRFC2544ThroughputTestSource OBJECT-TYPE
+	SYNTAX OCTET STRING (SIZE(1..17))
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"String that holds either the MAC or the MEP ID.
+	 MAC should be in the format AA:BB:CC:DD:EE:FF
+	 MEP shold be in the format DOMAIN:MA:MEP that represent 
+	 the values corresponding to dot1agCfmMdIndex, 
+	 dot1agCfmMaIndex and dot1agCfmMepIdentifier from 
+	 IEEE8021-CFM-MIB.
+	 e.g.:
+		MAC:   00:A0:12:5C:12:C0
+		MEP:   1:1:2"
+	::= { prvtSaaRFC2544ThroughputTestEntry 6 }
+
+prvtSaaRFC2544ThroughputTestTargetType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		none( 0 ),
+		mac ( 1 ),
+		mep ( 2 )
+	}
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput test target type."
+	::= { prvtSaaRFC2544ThroughputTestEntry 7 }
+
+prvtSaaRFC2544ThroughputTestTarget OBJECT-TYPE
+	SYNTAX OCTET STRING (SIZE(1..17))
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"String that holds either the MAC or the MEP ID.
+	 MAC should be in the format AA:BB:CC:DD:EE:FF
+	 MEP shold be in the format DOMAIN:MA:MEP that represent 
+	 the values corresponding to dot1agCfmMdIndex, 
+	 dot1agCfmMaIndex and dot1agCfmMepIdentifier from 
+	 IEEE8021-CFM-MIB.
+	 e.g.:
+		MAC:   00:A0:12:5C:12:C0
+		MEP:   1:1:2"
+	::= { prvtSaaRFC2544ThroughputTestEntry 8 }
+
+prvtSaaRFC2544ThroughputTestTimeout OBJECT-TYPE
+	SYNTAX Unsigned32 (0..100)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput test timeout, in 0.1 of a second increments"
+	DEFVAL { 10 }
+	::= { prvtSaaRFC2544ThroughputTestEntry 9 }
+
+prvtSaaRFC2544ThroughputTestCIR OBJECT-TYPE
+	SYNTAX Unsigned32 (64..1000000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput Committed Information Rate (CIR) value."
+	::= { prvtSaaRFC2544ThroughputTestEntry 10 }
+
+prvtSaaRFC2544ThroughputTestCBS OBJECT-TYPE
+	SYNTAX Unsigned32 (10..2048)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput Committed Burst Size (CBS) value."
+	::= { prvtSaaRFC2544ThroughputTestEntry 11 }
+
+prvtSaaRFC2544ThroughputTestBurstPercentage OBJECT-TYPE
+	SYNTAX Unsigned32 (0..100)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Part of CIR to use for bursts(CBS)."
+	::= { prvtSaaRFC2544ThroughputTestEntry 12 }
+
+prvtSaaRFC2544ThroughputTestDuration OBJECT-TYPE
+	SYNTAX Unsigned32 (1..180)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The SAA RFC2544 Throughput test duration, in seconds."
+	::= { prvtSaaRFC2544ThroughputTestEntry 13 }
+
+prvtSaaRFC2544ThroughputTestMaxFrameloss OBJECT-TYPE
+	SYNTAX Unsigned32 (0..100000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"The maximum frameloss to declare a successful 
+	SAA RFC2544 Throughput test in 0.001 of a percent."
+	::= { prvtSaaRFC2544ThroughputTestEntry 14 }
+
+prvtSaaRFC2544ThroughputTestCVLAN0 OBJECT-TYPE
+	SYNTAX Unsigned32 (0..4094)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"C-VLAN ID for the SAA RFC2544 Throughput test."
+	::= { prvtSaaRFC2544ThroughputTestEntry 15 }
+
+prvtSaaRFC2544ThroughputTestCVLAN0Priority OBJECT-TYPE
+	SYNTAX Unsigned32 (0..7)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"VPT for C-VLAN0 for the SAA RFC2544 Throughput test."
+	::= { prvtSaaRFC2544ThroughputTestEntry 16 }
+
+prvtSaaRFC2544ThroughputTestCVLAN0DropEligible OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Drop Eligible flag for C-VLAN0 for the SAA RFC2544 Throughput test."
+	::= { prvtSaaRFC2544ThroughputTestEntry 17 }
+
+prvtSaaRFC2544ThroughputTestSVLAN OBJECT-TYPE
+	SYNTAX Unsigned32 (0..4094)
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"S-VLAN ID for the SAA RFC2544 Throughput test."
+	::= { prvtSaaRFC2544ThroughputTestEntry 18 }
+
+prvtSaaRFC2544ThroughputTestSVLANPriority OBJECT-TYPE
+	SYNTAX Unsigned32 (0..7)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"VPT for S-VLAN0 for the SAA RFC2544 Throughput test."
+	::= { prvtSaaRFC2544ThroughputTestEntry 19 }
+
+prvtSaaRFC2544ThroughputTestSVLANDropEligible OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Drop Eligible flag for S-VLAN0 for the SAA RFC2544 Throughput test."
+	::= { prvtSaaRFC2544ThroughputTestEntry 20 }
+
+prvtSaaRFC2544ThroughputTestPDUSize OBJECT-TYPE
+	SYNTAX DisplayString (SIZE(3))
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Bitmask with predefined packet sizes for SAA RFC2544 Throughput test:
+	   64,128,256,512,1024,1280,1518,1530,2000,9000 (LSB set=64...10th bit set =9000)"
+	::= { prvtSaaRFC2544ThroughputTestEntry 21 }
+
+prvtSaaRFC2544ThroughputTestACKTimeout OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Defines the timeout for a SAA RFC2544 Throughput test tail to send an ACK MCC."
+	::= { prvtSaaRFC2544ThroughputTestEntry 22 }
+
+prvtSaaRFC2544ThroughputTestLoopbackType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		macSwap ( 1 ),
+                oam ( 2 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput test loopback type."
+	::= { prvtSaaRFC2544ThroughputTestEntry 23 }
+
+prvtSaaRFC2544ThroughputTestPaternType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		null ( 1 ),
+                nullCRC ( 2 ),
+		prbs ( 3 ),
+                prbsCRC ( 4 ),
+                none ( 8 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput test patern type.
+	 Options for it are none, null, null-crc, prbs, prbs-crc."
+	::= { prvtSaaRFC2544ThroughputTestEntry 24 }
+
+prvtSaaRFC2544ThroughputTestRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"The status of the row entry.
+	 The writable columns in a row can not be changed if the row
+	 is active. Certain columns must have a valid value before a row
+	 can be activated."
+	::= { prvtSaaRFC2544ThroughputTestEntry 25 }    
+	 
+prvtSaaRFC2544ThroughputTestEthertype OBJECT-TYPE
+	SYNTAX OCTET STRING
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION "SAA RFC2544 Throughput test Ethertype."    
+	DEFVAL { '8902'H }
+	::= { prvtSaaRFC2544ThroughputTestEntry 26 }
+
+
+	
+-- ***********************************************
+-- ************ Y1731 LOOPBACK TEST **************
+-- ***********************************************
+
+prvtSaaY1731LoopbackTestTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtSaaY1731LoopbackTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table holds the configuration for a SAA Y1731 Loopback test.
+		It describes the FPGA configuration."
+    ::= { prvtSaaTest 3 }
+
+prvtSaaY1731LoopbackTestEntry OBJECT-TYPE
+	SYNTAX PrvtSaaY1731LoopbackTestEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"NONE"
+	INDEX {
+			prvtSaaY1731LoopbackTestEncapType,
+			prvtSaaY1731LoopbackTestEncapValue
+          }
+	::= { prvtSaaY1731LoopbackTestTable 1 }
+
+PrvtSaaY1731LoopbackTestEntry ::= SEQUENCE {
+	prvtSaaY1731LoopbackTestEncapType 			INTEGER,
+	prvtSaaY1731LoopbackTestEncapValue			Unsigned32,
+	prvtSaaY1731LoopbackTestUserPort			Unsigned32,
+	prvtSaaY1731LoopbackTestUplinkPort			Unsigned32,
+	prvtSaaY1731LoopbackTestType				INTEGER,
+	prvtSaaY1731LoopbackTestRowStatus			RowStatus,
+	prvtSaaY1731LoopbackTestCCMAPSCount         		TruthValue,  
+	prvtSaaY1731LoopbackTestCountAllPriorities         	TruthValue
+}
+
+prvtSaaY1731LoopbackTestEncapType OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+		service	( 1 ),
+		vlan ( 2 )
+	}
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"SAA Y1731 Loopback test encapsulation type.
+	It can be either test over VLAN or test over Service.
+	The value 1 is the default value representing that neither
+	type is set."
+	::= { prvtSaaY1731LoopbackTestEntry 1 }
+	
+prvtSaaY1731LoopbackTestEncapValue OBJECT-TYPE
+	SYNTAX Unsigned32 (0..10000) 
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"The value of the defined SAA Y1731 Lopback test encapsulation.
+	It should be either the Vlan ID or the Service ID, depending 
+	on the type set in prvtSaaY1731LoopbackTestEncapType."
+	::= { prvtSaaY1731LoopbackTestEntry 2 }
+
+prvtSaaY1731LoopbackTestUserPort OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation 
+	is VLAN type and it determines the port on which the user is connected."
+	::= { prvtSaaY1731LoopbackTestEntry 3 }
+
+prvtSaaY1731LoopbackTestUplinkPort OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"For SAA Y1731 Loopback test, this leaf is used only in case the encapsulation 
+	is VLAN type and it determines the port that the SAA test devices are 
+	connected through."
+	::= { prvtSaaY1731LoopbackTestEntry 4 }
+
+prvtSaaY1731LoopbackTestType OBJECT-TYPE
+	SYNTAX INTEGER
+    {
+		none ( 1 ),
+		frameloss ( 2 ),
+		delayvariation ( 3 ),
+		framelossAndDelayvariation ( 4 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"SAA Y1731 Loopback test type. Specifies the test being perfoer"
+	::= { prvtSaaY1731LoopbackTestEntry 5 }
+
+	
+prvtSaaY1731LoopbackTestRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"The status of the row entry.
+	 The writable columns in a row can not be changed if the row
+	 is active. Certain columns must have a valid value before a row
+	 can be activated."
+	::= { prvtSaaY1731LoopbackTestEntry 6 }     
+
+
+prvtSaaY1731LoopbackTestCCMAPSCount OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Determines whether to include proactive OAM frames for ETH-CC and ETH-APS in loss measurement counters or not."
+	DEFVAL { false }
+	::= { prvtSaaY1731LoopbackTestEntry 7}
+
+prvtSaaY1731LoopbackTestCountAllPriorities OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Determines whether to count all packets ignoring the priority."
+	DEFVAL { false }
+	::= { prvtSaaY1731LoopbackTestEntry 8}
+
+-- ***********************************************
+-- ************ Y1731 PM TEST RESULT *************
+-- ***********************************************
+prvtSaaY1731TestResultTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtSaaY1731TestResultEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"This table contains SAA results for Y1731 tests."
+	::= { prvtSaaTestResult 1 }
+
+prvtSaaY1731TestResultEntry OBJECT-TYPE
+	SYNTAX PrvtSaaY1731TestResultEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION	"NONE"
+	INDEX { prvtSaaY1731PmTestOwner,
+		prvtSaaY1731PmTestName,
+		prvtSaaY1731TestResultIndex }
+	::= { prvtSaaY1731TestResultTable 1 }
+
+PrvtSaaY1731TestResultEntry ::= SEQUENCE {
+	prvtSaaY1731TestResultIndex 			Unsigned32,
+	prvtSaaY1731TestResultDelayNE			Unsigned32,
+        prvtSaaY1731TestResultDelayFE			Unsigned32,
+	prvtSaaY1731TestResultJitterNE			Unsigned32,
+	prvtSaaY1731TestResultJitterFE			Unsigned32,
+	prvtSaaY1731TestResultFrameLossNE		Unsigned32,
+        prvtSaaY1731TestResultFrameLossFE		Unsigned32,
+	prvtSaaY1731TestResultFramesSentNE		Counter32,
+	prvtSaaY1731TestResultFramesSentFE		Counter32,
+	prvtSaaY1731TestResultFramesRcvdNE		Counter32,
+	prvtSaaY1731TestResultFramesRcvdFE		Counter32,
+	prvtSaaY1731TestResultPacketsSent		Counter32,
+	prvtSaaY1731TestResultNoTimeouts		Unsigned32,
+	prvtSaaY1731TestResultNoErrors			Unsigned32,
+	prvtSaaY1731TestResultCompletionTime		Unsigned32
+}
+
+prvtSaaY1731TestResultIndex OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"SAA Y1731 test results table index"
+	::= { prvtSaaY1731TestResultEntry 1 }
+
+prvtSaaY1731TestResultDelayNE OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Near end delay result in 0.01 of a microsecond"
+	::= { prvtSaaY1731TestResultEntry 2 }
+
+prvtSaaY1731TestResultDelayFE OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Far end delay result in 0.01 of a microsecond"
+	::= { prvtSaaY1731TestResultEntry 3 }
+
+prvtSaaY1731TestResultJitterNE OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Near end jitter result in 0.01 of a microsecond"
+	::= { prvtSaaY1731TestResultEntry 4 }
+
+prvtSaaY1731TestResultJitterFE OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Far end jitter result in 0.01 of a microsecond"
+	::= { prvtSaaY1731TestResultEntry 5 }
+
+prvtSaaY1731TestResultFrameLossNE OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Near end frame-loss result in 0.0000001 of a percent"
+	::= { prvtSaaY1731TestResultEntry 6 }
+
+prvtSaaY1731TestResultFrameLossFE OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Far end frame-loss result in 0.0000001 of a percent"
+	::= { prvtSaaY1731TestResultEntry 7 }
+
+prvtSaaY1731TestResultFramesSentNE OBJECT-TYPE
+	SYNTAX Counter32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Near end sent frames"
+	::= { prvtSaaY1731TestResultEntry 8 }
+
+prvtSaaY1731TestResultFramesSentFE OBJECT-TYPE
+	SYNTAX Counter32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Far end sent frames"
+	::= { prvtSaaY1731TestResultEntry 9 }
+
+prvtSaaY1731TestResultFramesRcvdNE OBJECT-TYPE
+	SYNTAX Counter32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Near end received frames"
+	::= { prvtSaaY1731TestResultEntry 10 }
+
+prvtSaaY1731TestResultFramesRcvdFE OBJECT-TYPE
+	SYNTAX Counter32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Far end received frames"
+	::= { prvtSaaY1731TestResultEntry 11 }
+
+prvtSaaY1731TestResultPacketsSent OBJECT-TYPE
+	SYNTAX Counter32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"The test packets sent between devices"
+	::= { prvtSaaY1731TestResultEntry 12 }
+
+prvtSaaY1731TestResultNoTimeouts OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Number of timeouts for the SAA Y1731 Pm test"
+	::= { prvtSaaY1731TestResultEntry 13 }
+
+prvtSaaY1731TestResultNoErrors OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Number of errors for the SAA Y1731 Pm test"
+	::= { prvtSaaY1731TestResultEntry 14 }
+
+prvtSaaY1731TestResultCompletionTime OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "Completion time in seconds for the SAA Y1731 PM test."
+	::= { prvtSaaY1731TestResultEntry 15 }
+
+-- ***********************************************
+-- ************* RFC2544 TEST RESULT *************
+-- ***********************************************
+
+prvtSaaRFC2544TestResultTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtSaaRFC2544TestResultEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table contains SAA results for RFC2544 tests."
+	::= { prvtSaaTestResult 2 }
+
+prvtSaaRFC2544TestResultEntry OBJECT-TYPE
+	SYNTAX PrvtSaaRFC2544TestResultEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION	"NONE"
+	INDEX { prvtSaaRFC2544ThroughputTestOwner,
+		prvtSaaRFC2544ThroughputTestName,
+		prvtSaaRFC2544TestResultIndex }
+	::= { prvtSaaRFC2544TestResultTable 1 }
+
+PrvtSaaRFC2544TestResultEntry ::= SEQUENCE {
+	prvtSaaRFC2544TestResultIndex 			Unsigned32,
+	prvtSaaRFC2544TestResultFrameSize		Unsigned32,
+	prvtSaaRFC2544TestResultFrameLoss		Unsigned32,
+	prvtSaaRFC2544TestResultThroughput		Unsigned32,
+	prvtSaaRFC2544TestResultNetThroughput		Unsigned32,
+	prvtSaaRFC2544TestResultStatus			INTEGER,
+        prvtSaaRFC2544TestResultDelayMinimum            Unsigned32,
+        prvtSaaRFC2544TestResultDelayAverage            Unsigned32,
+        prvtSaaRFC2544TestResultDelayMaximum            Unsigned32
+}
+
+prvtSaaRFC2544TestResultIndex OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"SAA RFC2544 Throughput test results table index.
+	Index will take values 1 to 9, each value representing a frame size
+	from this list: 64,128,256,512,1024,1280,1518,2000,9000.
+	The leaf prvtSaaRFC2544TestResultFrameSize will present this value
+	in a more user-friendly way."
+	::= { prvtSaaRFC2544TestResultEntry 1 }
+
+prvtSaaRFC2544TestResultFrameSize OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Frame size of the SAA RFC2544 test.
+	Possible values are: 64,128,256,512,1024,1280,1518,2000,9000"
+	::= { prvtSaaRFC2544TestResultEntry 2 }
+
+prvtSaaRFC2544TestResultFrameLoss OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Frame loss of the SAA RFC2544 test measured in 0.001 of a percent"
+	::= { prvtSaaRFC2544TestResultEntry 3 }
+
+prvtSaaRFC2544TestResultThroughput OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Throughput of the SAA RFC2544 test measured in Kbps"
+	::= { prvtSaaRFC2544TestResultEntry 4 }
+
+prvtSaaRFC2544TestResultNetThroughput OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"The actual throughput of the SAA RFC2544 test 
+	containing only user data. It is measured in Kbps."
+	::= { prvtSaaRFC2544TestResultEntry 5 }
+
+prvtSaaRFC2544TestResultStatus OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                notAvailable ( 1 ),
+                ready ( 2 ),
+                error ( 3 )
+        }
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Status of the SAA RFC2544 test"
+	::= { prvtSaaRFC2544TestResultEntry 6 }
+
+prvtSaaRFC2544TestResultDelayMinimum OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "Minimum delay for SAA RFC2544 test measured in 1/100th of a microsecond."
+        ::= { prvtSaaRFC2544TestResultEntry 7 }
+
+prvtSaaRFC2544TestResultDelayAverage OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "Average delay for SAA RFC2544 test measured in 1/100th of a microsecond."
+        ::= { prvtSaaRFC2544TestResultEntry 8 }
+
+prvtSaaRFC2544TestResultDelayMaximum OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "Maximum delay for SAA RFC2544 test measured in 1/100th of a microsecond."
+        ::= { prvtSaaRFC2544TestResultEntry 9 }
+
+-- ***********************************************
+-- ****************** PROFILES *******************
+-- ***********************************************
+prvtSaaProfileTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtSaaProfileEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"Table contains SAA thresholds."
+	::= { prvtSaaProfiles 1 }
+
+prvtSaaProfileEntry OBJECT-TYPE
+	SYNTAX PrvtSaaProfileEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION	"NONE"
+	INDEX { prvtSaaProfileIndex }
+	::= { prvtSaaProfileTable 1 }
+
+PrvtSaaProfileEntry ::= SEQUENCE {
+	prvtSaaProfileIndex			Unsigned32,
+        prvtSaaProfileDelayNE			Unsigned32,
+        prvtSaaProfileDelayFE			Unsigned32,
+	prvtSaaProfileJitterNE			Unsigned32,
+	prvtSaaProfileJitterFE			Unsigned32,
+	prvtSaaProfileFrameLossNE		Unsigned32,
+        prvtSaaProfileFrameLossFE		Unsigned32,
+        prvtSaaProfileRowStatus                 RowStatus,
+        prvtSaaProfileName                      OCTET STRING
+       }
+
+prvtSaaProfileIndex OBJECT-TYPE
+	SYNTAX Unsigned32 (1..2147483647)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"SAA profile table index."
+	::= { prvtSaaProfileEntry 1 }
+
+prvtSaaProfileDelayNE OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60000000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Near end delay in microseconds"
+	DEFVAL          {1000000}
+	::= { prvtSaaProfileEntry 2 }
+
+prvtSaaProfileDelayFE OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60000000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Far end delay in microseconds"
+	DEFVAL          {1000000}
+	::= { prvtSaaProfileEntry 3 }
+
+prvtSaaProfileJitterNE OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60000000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Near end jitter in microseconds"
+	DEFVAL          {300000}
+	::= { prvtSaaProfileEntry 4 }
+
+prvtSaaProfileJitterFE OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60000000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Far end jitter in microseconds"
+	DEFVAL          {300000}
+	::= { prvtSaaProfileEntry 5 }
+
+prvtSaaProfileFrameLossNE OBJECT-TYPE
+	SYNTAX Unsigned32 (0..100000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Near end frame-loss measured in 0.001 of percent"
+	DEFVAL          {8000}
+	::= { prvtSaaProfileEntry 6 }
+
+prvtSaaProfileFrameLossFE OBJECT-TYPE
+	SYNTAX Unsigned32 (0..100000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Far end frame-loss measured in 0.001 of percent"
+	DEFVAL          {8000}
+	::= { prvtSaaProfileEntry 7 }
+
+prvtSaaProfileRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Creation/delete/edit of the SAA profile. "
+	::= { prvtSaaProfileEntry 8 }
+
+prvtSaaProfileName OBJECT-TYPE
+        SYNTAX OCTET STRING (SIZE(0..32))
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+        "Name assigned to the SAA profile."
+        DEFVAL { '00'H }
+        ::= { prvtSaaProfileEntry 9 }
+
+
+-- ***********************************************
+-- **************** Notification *****************
+-- ***********************************************
+
+prvtSaaRFC2544ProbeFailed NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaRFC2544ThroughputTestType,
+		prvtSaaRFC2544TestResultStatus
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever a SAA probe
+		on a specific test fails."
+	::= { prvtSaaNotifications 1 }
+
+prvtSaaRFC2544ProbeSuccess NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaRFC2544ThroughputTestType,
+		prvtSaaRFC2544TestResultStatus
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever a SAA probe
+		on a specific test finishes with success."
+	::= { prvtSaaNotifications 2 }
+
+prvtSaaRFC2544TestFinished NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaRFC2544ThroughputTestExecStatus
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever a SAA RFC2544 test is finished"
+	::= { prvtSaaNotifications 3 }
+
+prvtSaaY1731DelayNEThreshold NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaY1731TestResultDelayNE,
+		prvtSaaProfileDelayNE
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever the near end delay
+		on a SAA Y1731 test will surpass one of the 2 defined 
+		thresholds."
+	::= { prvtSaaNotifications 4 }
+
+prvtSaaY1731DelayFEThreshold NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaY1731TestResultDelayFE,
+		prvtSaaProfileDelayFE
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever the far end delay
+		on a SAA Y1731 test will surpass one of the 2 defined 
+		thresholds."
+	::= { prvtSaaNotifications 5 }
+
+prvtSaaY1731JitterNEThreshold NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaY1731TestResultJitterNE,
+		prvtSaaProfileJitterNE
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever the near end jitter 
+		on a SAA Y1731 test will surpass one of the 2 defined 
+		thresholds."
+	::= { prvtSaaNotifications 6 }
+
+prvtSaaY1731JitterFEThreshold NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaY1731TestResultJitterFE,
+		prvtSaaProfileJitterFE
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever the far end jitter
+		on a SAA Y1731 test will surpass one of the 2 defined 
+		thresholds."
+	::= { prvtSaaNotifications 7 }
+
+prvtSaaY1731FrLossNEThreshold NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaY1731TestResultFrameLossNE,
+		prvtSaaProfileFrameLossNE
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever the near end frameloss
+		on a SAA Y1731 test will surpass one of the 2 defined 
+		thresholds."
+	::= { prvtSaaNotifications 8 }
+
+prvtSaaY1731FrLossFEThreshold NOTIFICATION-TYPE
+	OBJECTS {
+		prvtSaaY1731TestResultFrameLossFE,
+		prvtSaaProfileFrameLossFE
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever the far end frameloss
+		on a SAA Y1731 test will surpass one of the 2 defined 
+		thresholds."
+	::= { prvtSaaNotifications 9 }
+
+
+-- ******************************************************************
+-- PRVT-RING-EPS MIB Module - Conformance Information
+-- ******************************************************************
+
+prvtSaaCompliances OBJECT IDENTIFIER ::= { prvtSaaConformance 1 }
+prvtSaaGroups      OBJECT IDENTIFIER ::= { prvtSaaConformance 2 }
+
+-- ******************************************************************
+-- Units of conformance
+-- ******************************************************************
+
+prvtSaaY1731TestGroup OBJECT-GROUP
+    OBJECTS {
+	prvtSaaY1731PmTestType,
+	prvtSaaY1731PmTestExecStatus,
+	prvtSaaY1731PmTestEncapType,
+        prvtSaaY1731PmTestEncapValue,
+	prvtSaaY1731PmTestUserPort,
+	prvtSaaY1731PmTestUplinkPort,
+	prvtSaaY1731PmTestTargetMac,
+	prvtSaaY1731PmTestCfmDomainLevel,
+        prvtSaaY1731PmTestRemoteCfmMep,
+	prvtSaaY1731PmTestProfile,
+        prvtSaaY1731PmTestHistoryDepth,
+	prvtSaaY1731PmTestPeriod,
+        prvtSaaY1731PmTestTimeout,
+	prvtSaaY1731PmTestMonitorInterval,
+	prvtSaaY1731PmTestFrequency,
+	prvtSaaY1731PmTestClocksInSync,
+	prvtSaaY1731PmTestDelayMethod,
+	prvtSaaY1731PmTestDelayPvalue,
+	prvtSaaY1731PmTestJitterMethod,
+	prvtSaaY1731PmTestJitterPvalue,
+	prvtSaaY1731PmTestPriority,
+	prvtSaaY1731PmTestCCMAPSCount,
+	prvtSaaY1731PmTestLossMeasurementType,
+	prvtSaaY1731PmTestSLMTransmit,
+	prvtSaaY1731PmTestTestId,
+	prvtSaaY1731PmTestDropEligible,
+	prvtSaaY1731PmTestDataSize,
+	prvtSaaY1731PmTestRowStatus,
+	prvtSaaY1731PmTestCountAllPriorities
+
+	}
+    STATUS      current
+    DESCRIPTION
+       "Objects for the SAA Y1731 test group."
+    ::= { prvtSaaGroups 1 }
+
+prvtSaaRFC2544TestGroup OBJECT-GROUP
+    OBJECTS {
+        prvtSaaRFC2544ThroughputTestType,
+	prvtSaaRFC2544ThroughputTestExecStatus,
+	prvtSaaRFC2544ThroughputTestSourceType,
+        prvtSaaRFC2544ThroughputTestSource,
+        prvtSaaRFC2544ThroughputTestTargetType,
+        prvtSaaRFC2544ThroughputTestTarget,
+	prvtSaaRFC2544ThroughputTestTimeout,
+        prvtSaaRFC2544ThroughputTestCIR,
+        prvtSaaRFC2544ThroughputTestCBS,
+	prvtSaaRFC2544ThroughputTestBurstPercentage,
+	prvtSaaRFC2544ThroughputTestDuration,
+	prvtSaaRFC2544ThroughputTestMaxFrameloss,
+        prvtSaaRFC2544ThroughputTestCVLAN0,
+	prvtSaaRFC2544ThroughputTestCVLAN0Priority,
+	prvtSaaRFC2544ThroughputTestCVLAN0DropEligible,
+	prvtSaaRFC2544ThroughputTestSVLAN,
+	prvtSaaRFC2544ThroughputTestSVLANPriority,
+	prvtSaaRFC2544ThroughputTestSVLANDropEligible,
+	prvtSaaRFC2544ThroughputTestPDUSize,
+	prvtSaaRFC2544ThroughputTestACKTimeout,
+	prvtSaaRFC2544ThroughputTestLoopbackType,
+	prvtSaaRFC2544ThroughputTestPaternType,
+	prvtSaaRFC2544ThroughputTestRowStatus,  
+	prvtSaaRFC2544ThroughputTestEthertype
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the SAA RFC2544 test group."
+    ::= { prvtSaaGroups 2 }
+
+prvtSaaY1731TestResultsGroup OBJECT-GROUP
+    OBJECTS {
+	prvtSaaY1731TestResultDelayNE,
+        prvtSaaY1731TestResultDelayFE,
+	prvtSaaY1731TestResultJitterNE,
+	prvtSaaY1731TestResultJitterFE,
+	prvtSaaY1731TestResultFrameLossNE,
+        prvtSaaY1731TestResultFrameLossFE,
+	prvtSaaY1731TestResultFramesSentNE,
+	prvtSaaY1731TestResultFramesSentFE,
+	prvtSaaY1731TestResultFramesRcvdNE,
+	prvtSaaY1731TestResultFramesRcvdFE,
+	prvtSaaY1731TestResultPacketsSent,
+	prvtSaaY1731TestResultNoTimeouts,
+	prvtSaaY1731TestResultNoErrors,
+	prvtSaaY1731TestResultCompletionTime
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the SAA Y1731 test results group."
+    ::= { prvtSaaGroups 3 }
+
+prvtSaaRFC2544TestResultsGroup OBJECT-GROUP
+    OBJECTS {
+	prvtSaaRFC2544TestResultFrameSize,
+	prvtSaaRFC2544TestResultFrameLoss,
+	prvtSaaRFC2544TestResultThroughput,
+	prvtSaaRFC2544TestResultNetThroughput,
+	prvtSaaRFC2544TestResultStatus,
+        prvtSaaRFC2544TestResultDelayMinimum,
+        prvtSaaRFC2544TestResultDelayAverage,
+        prvtSaaRFC2544TestResultDelayMaximum
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the SAA RFC2544 test results group."
+    ::= { prvtSaaGroups 4 }
+
+prvtSaaProfilesGroup OBJECT-GROUP
+    OBJECTS {
+        prvtSaaProfileDelayNE,
+        prvtSaaProfileDelayFE,
+	prvtSaaProfileJitterNE,
+	prvtSaaProfileJitterFE,
+	prvtSaaProfileFrameLossNE,
+        prvtSaaProfileFrameLossFE,
+        prvtSaaProfileRowStatus,
+        prvtSaaProfileName
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the SAA profiles group."
+    ::= { prvtSaaGroups 5 }
+
+prvtSaaNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+      prvtSaaRFC2544ProbeFailed,
+      prvtSaaRFC2544ProbeSuccess,
+      prvtSaaRFC2544TestFinished,
+      prvtSaaY1731DelayNEThreshold,
+      prvtSaaY1731DelayFEThreshold,
+      prvtSaaY1731JitterNEThreshold,
+      prvtSaaY1731JitterFEThreshold,
+      prvtSaaY1731FrLossNEThreshold,
+      prvtSaaY1731FrLossFEThreshold
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Notifications group."
+    ::= { prvtSaaGroups 6 }
+    
+prvtSaaY1731LoopbackTestGroup OBJECT-GROUP
+    OBJECTS {
+	prvtSaaY1731LoopbackTestUserPort,
+	prvtSaaY1731LoopbackTestUplinkPort,
+	prvtSaaY1731LoopbackTestType,
+	prvtSaaY1731LoopbackTestCCMAPSCount,
+	prvtSaaY1731LoopbackTestRowStatus,
+	prvtSaaY1731LoopbackTestCountAllPriorities
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the SAA Y1731 Loopback test group."
+    ::= { prvtSaaGroups 7 }
+
+
+-- ******************************************************************
+-- MIB Module Compliance statements
+-- ******************************************************************
+
+prvtSaaCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for support of the SAA MIB module."
+    MODULE
+        MANDATORY-GROUPS {
+            prvtSaaY1731TestGroup,
+	    prvtSaaRFC2544TestGroup,
+	    prvtSaaY1731TestResultsGroup,
+	    prvtSaaRFC2544TestResultsGroup,
+	    prvtSaaProfilesGroup,
+	    prvtSaaNotificationsGroup,
+	    prvtSaaY1731LoopbackTestGroup
+            }
+
+    OBJECT prvtSaaY1731PmTestRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    OBJECT prvtSaaRFC2544ThroughputTestRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+      
+    OBJECT prvtSaaProfileRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    OBJECT prvtSaaY1731LoopbackTestRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    ::= { prvtSaaCompliances 1 }
+
+
+--- TWAMP
+
+
+--prvtTwampNotifications OBJECT IDENTIFIER ::= { prvtTwampMIB 0 }
+prvtTwampObjects OBJECT IDENTIFIER ::= { prvtSaaObjects 4 }
+--
+--
+--
+prvtTwampTest OBJECT IDENTIFIER ::= { prvtTwampObjects 1 }
+prvtTwampServer OBJECT IDENTIFIER ::= { prvtTwampObjects 2 }
+prvtTwampTestResult OBJECT IDENTIFIER ::= { prvtTwampObjects 3 }
+--
+--
+--
+PrvtTwampTestNameType ::= TEXTUAL-CONVENTION
+DISPLAY-HINT "32a"
+STATUS current
+DESCRIPTION "TWAMP test name type (1..32 characters)."
+SYNTAX OCTET STRING (SIZE(1..32))
+
+
+
+PrvtTwampDecimalPercent ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "3d.2d"
+    STATUS      current
+    DESCRIPTION 
+        "A percentage value in decimal format."
+    SYNTAX OCTET STRING (SIZE(1..10))
+--
+--
+--
+
+
+prvtTwampTestTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtTwampTestEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"Table contains TWAMP tests."
+		::= { prvtTwampTest 1 }
+		
+prvtTwampTestEntry OBJECT-TYPE
+    SYNTAX      PrvtTwampTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtTwampTestTable"
+    INDEX  {prvtTwampTestName }
+    ::= { prvtTwampTestTable 1 }       
+
+
+PrvtTwampTestEntry ::= SEQUENCE {
+	prvtTwampTestName PrvtTwampTestNameType,
+	prvtTwampTestRowStatus RowStatus,
+	prvtTwampTestServer IpAddress,
+	prvtTwampTestSessionsCount Integer32,
+	prvtTwampTestPackets Integer32,
+	prvtTwampTestTimeout Integer32,
+	prvtTwampTestDelay Integer32,
+	prvtTwampTestExecuteNow Integer32
+}
+
+
+   prvtTwampTestName OBJECT-TYPE
+       SYNTAX      PrvtTwampTestNameType
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "TWAMP test name."
+           ::= { prvtTwampTestEntry 1 }
+           
+           
+   prvtTwampTestRowStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "Create/delete entry in prvtTwampTestTable."
+           ::= { prvtTwampTestEntry 2 }
+ 
+   prvtTwampTestServer OBJECT-TYPE
+       SYNTAX      IpAddress
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "TWAMP test server ip-address."
+           ::= { prvtTwampTestEntry 3 }     
+           
+	prvtTwampTestSessionsCount OBJECT-TYPE
+       SYNTAX      Integer32 (1..10)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The number of parallel test sessions."
+       DEFVAL  { 1 }
+           ::= { prvtTwampTestEntry 4 }
+
+   prvtTwampTestPackets OBJECT-TYPE
+       SYNTAX      Integer32 (10..1000)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The number of packets in parallel sessions."
+       DEFVAL  { 300 }
+           ::= { prvtTwampTestEntry 5 }
+
+   prvtTwampTestTimeout OBJECT-TYPE
+       SYNTAX      Integer32 (100..10000)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The timout interval of test packets (in milliseconds)."
+       DEFVAL  { 900 }
+           ::= { prvtTwampTestEntry 6 }
+           
+           
+   prvtTwampTestDelay OBJECT-TYPE
+       SYNTAX      Integer32 (100..1500)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "The delay interval between test packets (in milliseconds)"
+       DEFVAL  { 100 }
+           ::= { prvtTwampTestEntry 7 }     
+           
+           
+prvtTwampTestExecuteNow OBJECT-TYPE
+SYNTAX Integer32 (0..2)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"When this object is set to '1', command
+self-test execute-now.  When this object is set to '2' 
+the self-test is stopped. Setting the variable to '0'
+results in an 'inconsistentValue' error.
+Setting it to any other value has no effect.
+
+When this object is read, the value '0' is returned."
+::= { prvtTwampTestEntry 8 }
+
+
+
+prvtTwampClientTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtTwampClientEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"Table contains the allowed clients for the TWAMP server."
+		::= { prvtTwampServer 6 }
+        
+prvtTwampClientEntry OBJECT-TYPE
+	SYNTAX PrvtTwampClientEntry
+	MAX-ACCESS  not-accessible
+	STATUS current
+	DESCRIPTION "Entry in twampClientTable." 
+	INDEX {prvtTwampClientIp}
+		::= { prvtTwampClientTable 1 }
+              
+PrvtTwampClientEntry ::= SEQUENCE {
+	prvtTwampClientIp IpAddress,
+	prvtTwampClientRowStatus RowStatus
+	}
+	
+	
+prvtTwampClientIp OBJECT-TYPE
+       SYNTAX      IpAddress
+       MAX-ACCESS  not-accessible
+       STATUS      current
+       DESCRIPTION
+               "The ip-address of the client."
+           ::= { prvtTwampClientEntry 1 }
+           
+prvtTwampClientRowStatus OBJECT-TYPE
+       SYNTAX      RowStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+               "create/delete entry in prvtTwampClientTable"
+           ::= { prvtTwampClientEntry 2 }
+	
+
+   prvtTwampServerInnactivity OBJECT-TYPE
+       SYNTAX      Integer32 (1..900)
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+               "The server innactivity timeout interval of the TWAMP server (in seconds)."
+       DEFVAL  { 900 }
+           ::= { prvtTwampServer 1 }
+           
+   prvtTwampServerSessionInnactivity OBJECT-TYPE
+       SYNTAX      Integer32 (1..900)
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+               "The session innactivity timeout interval of the TWAMP server (in seconds)."
+       DEFVAL  { 900 }
+           ::= { prvtTwampServer 2 }
+           
+   prvtTwampServerMaxSessions OBJECT-TYPE
+       SYNTAX      Integer32 (1..1000)
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+               "The maximum number of controll sessions supported by the TWAMP server."
+       DEFVAL  { 10 }
+           ::= { prvtTwampServer 3 }
+           
+   prvtTwampServerMaxParallelSessions OBJECT-TYPE
+       SYNTAX      Integer32 (1..10)
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+               "The maximum number of parallel test sessions for each client supperted by the TWAMP server."
+       DEFVAL  { 1 }
+           ::= { prvtTwampServer 4 }
+
+   prvtTwampServerShutdown OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+               "The administrative state of the TWAMP server."
+       DEFVAL  { 2 }
+           ::= { prvtTwampServer 5 }
+           
+   prvtTwampServerControlSessions OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The number of current control sessions established on the TWAMP server."
+           ::= { prvtTwampServer 7 }
+           
+   prvtTwampServerTestSessions OBJECT-TYPE
+       SYNTAX      Integer32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The number of current test sessions established on the TWAMP server."
+           ::= { prvtTwampServer 8 }
+		
+
+prvtTwampTestResultTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtTwampTestResultEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"Table contains statistics of the executed TWAMP tests."
+		::= { prvtTwampTestResult 1 }
+
+prvtTwampTestResultEntry OBJECT-TYPE
+	SYNTAX PrvtTwampTestResultEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION "Entry in twampTestResultTable"
+	INDEX {prvtTwampTestId}
+		::= { prvtTwampTestResultTable 1 }
+
+PrvtTwampTestResultEntry ::= SEQUENCE {
+	prvtTwampTestId Unsigned32,
+	prvtTwampTestResultName PrvtTwampTestNameType,
+	prvtTwampTestStartTime Unsigned32,
+	prvtTwampTestServerAddress IpAddress,
+	prvtTwampTestSessions Unsigned32,
+	prvtTwampTestState INTEGER,
+	prvtTwampTestRtt Counter64,
+	prvtTwampTestMinRtt Counter64,
+	prvtTwampTestMaxRtt Counter64,
+	prvtTwampTestPcktSent Unsigned32,
+	prvtTwampTestPcktLost Unsigned32,
+	prvtTwampTestPcktDrop Unsigned32,
+	prvtTwampTestVariation Counter64,
+	prvtTwampTestVariationLow PrvtTwampDecimalPercent,
+	prvtTwampTestVariationMiddle PrvtTwampDecimalPercent,
+	prvtTwampTestVariationHigh PrvtTwampDecimalPercent   
+}
+
+
+  prvtTwampTestId OBJECT-TYPE
+       SYNTAX      Unsigned32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The internal ID of the TWAMP test instance."
+           ::= { prvtTwampTestResultEntry 1 }
+
+   prvtTwampTestResultName OBJECT-TYPE
+       SYNTAX      PrvtTwampTestNameType
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "TWAMP test name."
+           ::= { prvtTwampTestResultEntry 2 }
+
+   prvtTwampTestStartTime OBJECT-TYPE
+       SYNTAX      Unsigned32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The start time of the TWAMP test instance."
+           ::= { prvtTwampTestResultEntry 3 }
+           
+   prvtTwampTestServerAddress OBJECT-TYPE
+       SYNTAX      IpAddress
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The server ip-address of the TWAMP test instance."
+           ::= { prvtTwampTestResultEntry 4 }
+           
+   prvtTwampTestSessions OBJECT-TYPE
+       SYNTAX      Unsigned32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The number of parallel test sessions of the TWAMP test instance."
+       DEFVAL  { 0 }
+           ::= { prvtTwampTestResultEntry 5 }
+           
+           
+   prvtTwampTestState OBJECT-TYPE
+       SYNTAX      INTEGER  { 
+									failed ( 1 ),
+									running ( 2 ),
+									stopped ( 3 ),
+									finished ( 4 )
+		}
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The status of the executed TWAMP test instance."
+       DEFVAL  { 2 }
+           ::= { prvtTwampTestResultEntry 6 }
+           
+   prvtTwampTestRtt OBJECT-TYPE
+       SYNTAX      Counter64
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The average round-trip time of the TWAMP test sample."
+       DEFVAL  { 0 }
+           ::= { prvtTwampTestResultEntry 7 }
+           
+           
+   prvtTwampTestMinRtt OBJECT-TYPE
+       SYNTAX      Counter64
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The minimum round-trip time of the TWAMP test sample."
+       DEFVAL  { 0 }
+           ::= { prvtTwampTestResultEntry 8 }
+           
+   prvtTwampTestMaxRtt OBJECT-TYPE
+       SYNTAX      Counter64
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The maximum round-trip time of the TWAMP test sample."
+       DEFVAL  { 0 }
+           ::= { prvtTwampTestResultEntry 9 }
+           
+           
+   prvtTwampTestPcktSent OBJECT-TYPE
+       SYNTAX      Unsigned32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The number of test packets sent for the TWAMP test instance."
+       DEFVAL  { 0 }
+           ::= { prvtTwampTestResultEntry 10 }
+           
+    prvtTwampTestPcktLost OBJECT-TYPE
+       SYNTAX      Unsigned32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The number of lost test packets."
+       DEFVAL  { 0 }
+           ::= { prvtTwampTestResultEntry 11 }
+           
+           
+    prvtTwampTestPcktDrop OBJECT-TYPE
+       SYNTAX      Unsigned32
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The number of dropped test packets."
+       DEFVAL  { 0 }
+           ::= { prvtTwampTestResultEntry 12 }
+           
+           
+    prvtTwampTestVariation OBJECT-TYPE
+       SYNTAX      Counter64
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The maximum module variation of the TWAMP test sample"
+       DEFVAL  { 0 }
+           ::= { prvtTwampTestResultEntry 13 }
+           
+           
+ 	prvtTwampTestVariationLow OBJECT-TYPE
+       SYNTAX      PrvtTwampDecimalPercent
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+               "The percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample."
+           ::= { prvtTwampTestResultEntry 14 }
+           
+ 	prvtTwampTestVariationMiddle OBJECT-TYPE
+       SYNTAX      PrvtTwampDecimalPercent
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+                "The percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample."
+           ::= { prvtTwampTestResultEntry 15 }
+           
+ 	prvtTwampTestVariationHigh OBJECT-TYPE
+       SYNTAX      PrvtTwampDecimalPercent
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+                "The percent of singletons whose variation is greater than 10% of the maximum module variation of the sample."
+           ::= { prvtTwampTestResultEntry 16 }                        
+
+
+--- TWAMP end
+
+
+
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-SERV-MIB b/MIBS/telco-systems/binos/PRVT-SERV-MIB
new file mode 100644
index 0000000..d5e9fbf
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SERV-MIB
@@ -0,0 +1,2180 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SERV-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-SERV-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+NOTIFICATION-TYPE,
+Integer32,
+Unsigned32,
+IpAddress,
+Counter32
+FROM SNMPv2-SMI
+
+MODULE-COMPLIANCE,
+OBJECT-GROUP,
+NOTIFICATION-GROUP
+FROM SNMPv2-CONF
+
+TEXTUAL-CONVENTION,
+DisplayString,
+RowStatus,
+TimeStamp,
+TruthValue
+FROM SNMPv2-TC
+
+TNamedItemOrEmpty,
+TNetworkPolicyIdOrNone,
+TSapIngressPolicyIdOrNone,
+TSapEgressPolicyIdOrNone,
+TNamedItem,
+serviceAccessSwitch
+FROM PRVT-QOS-MIB;
+
+
+prvtServicesMIB MODULE-IDENTITY
+LAST-UPDATED "200908070000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+DESCRIPTION
+"This document is the SNMP MIB module to manage and provision
+the various services of the T-Metro system."
+
+-- 
+-- Revision History
+--
+REVISION "200908070000Z"
+DESCRIPTION "Added prefix prvt to Services' traps."
+REVISION "200903260000Z"
+DESCRIPTION "Added object for Revert timer"
+REVISION "200903240000Z"
+DESCRIPTION "Changed svcVPLSUplinkTable. Corrected various descriptions. Corrected types for some HQOS objects."
+REVISION "200902170000Z"
+DESCRIPTION "Removed references to undefined OBJECT-GROUPs."
+REVISION "200810090000Z"
+DESCRIPTION "Fixed the range of sdpGroupIdentifier."
+REVISION "200804100000Z"
+DESCRIPTION "changed svcVplsMode values. Added sapLearnMode."
+REVISION "200803060000Z"
+DESCRIPTION "changed description of svcAdminStatus."
+REVISION "200801110000Z"
+DESCRIPTION "changed sdpOperStatus values."
+REVISION "200801090000Z"
+DESCRIPTION "added sdpBindVlanTag."
+REVISION "200801070000Z"
+DESCRIPTION "Fixed the range of sdpGroupIdentifier."
+REVISION "200706280000Z" 
+DESCRIPTION "Returned for backward compatibility svcMtu; Clarified few attributes descripton."
+REVISION "200609020000Z" 
+DESCRIPTION "Lots of changes:
+1. Index for the service table is changed.
+2. Few objects from the service tables are moved in sdp
+3. svcVCId is have now more generic usage. so it's name is changed to svcVPNId
+4. The descriptions for some objects are enhanced"
+REVISION "200607020000Z" 
+DESCRIPTION "Fixed the range of sdpGroupIdentifier."
+REVISION "200602040000Z" 
+DESCRIPTION "Fixed the range of the svcMtu object and changed the description of svcRowStatus."
+REVISION "200511090000Z" 
+DESCRIPTION "Initial version."
+
+
+::= { serviceAccessSwitch 2 }
+
+
+-- --------------------------------------------------------------------
+-- PRVT-SERV-MIB organisation
+-- --------------------------------------------------------------------
+
+prvtTMServObjs OBJECT IDENTIFIER ::= { prvtServicesMIB 1}
+prvtTMCustObjs OBJECT IDENTIFIER ::= { prvtTMServObjs 1 }
+prvtTMSvcObjs OBJECT IDENTIFIER ::= { prvtTMServObjs 2 }
+prvtTMSapObjs OBJECT IDENTIFIER ::= { prvtTMServObjs 3 }
+prvtTMSdpObjs OBJECT IDENTIFIER ::= { prvtTMServObjs 4 } 
+
+prvtTMServVPLSGlobals OBJECT IDENTIFIER ::= { prvtTMSvcObjs 3 } 
+
+prvtServNotifications OBJECT IDENTIFIER ::= { prvtServicesMIB 2 }
+prvtCustNotif OBJECT IDENTIFIER ::= { prvtServNotifications 1 }
+prvtSvcNotif OBJECT IDENTIFIER ::= { prvtServNotifications 2 }
+prvtSapNotif OBJECT IDENTIFIER ::= { prvtServNotifications 3 }
+prvtSdpNotif OBJECT IDENTIFIER ::= { prvtServNotifications 4 }
+
+prvtCustTraps OBJECT IDENTIFIER ::= { prvtCustNotif 0 }
+prvtSvcTraps OBJECT IDENTIFIER ::= { prvtSvcNotif 0 }
+prvtSapTraps OBJECT IDENTIFIER ::= { prvtSapNotif 0 }
+prvtSdpTraps OBJECT IDENTIFIER ::= { prvtSdpNotif 0 }
+
+
+prvtTMServConformance OBJECT IDENTIFIER ::= { prvtServicesMIB 3 }
+prvtTMCustConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 1 }
+prvtTMSvcConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 2 }
+prvtTMSapConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 3 }
+prvtTMSdpConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 4 }
+prvtTMTstpConformance OBJECT IDENTIFIER ::= { prvtTMServConformance 5 }
+
+-- --------------------------------------------------------------------
+-- BETM-SERV-MIB Textual Conventions
+-- --------------------------------------------------------------------
+
+ServiceAdminStatus ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "ServiceAdminStatus data type is an enumerated integer that
+describes the values used to identify the administrative
+state of a service."
+REFERENCE "Administrative Status"
+SYNTAX INTEGER {
+up(1),
+down(2)
+}
+
+ServiceOperStatus ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "ServiceOperStatus data type is an enumerated integer that
+describes the values used to identify the current operational
+state of a service."
+REFERENCE "Operational status"
+SYNTAX INTEGER {
+up(1),
+down(2)
+}
+ServObjName ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "ASCII string used to name various service
+objects."
+SYNTAX OCTET STRING (SIZE (0..32))
+
+ServObjDesc ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "ASCII string used to describe various service
+objects."
+SYNTAX OCTET STRING (SIZE (0..256)) 
+
+ServType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "This textual convention is used to specify the
+type of a given service."
+SYNTAX INTEGER {
+epipe(1), -- Ethernet pipe
+p3pipe(2), -- POS pipe
+tls(3), -- Virtual private LAN service
+vprn(4), -- Virtual private routed network
+ies(5), -- Internet enhanced service
+mirror(6), -- Mirror service
+apipe(7), -- ATM pipe service
+fpipe(8), -- FR pipe service 
+vpws(9), -- VPWS service
+vpls-pe(10), -- VPLS service Provider Edge 
+vpls-mtu(11) -- VPLS service Multitenant Unit 
+}
+
+VpnId ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "A number used to identify a VPN. In general
+each service corresponds to a single VPN, but
+under some circumstances a VPN may be composed
+of multiple services."
+SYNTAX Unsigned32 (0|1..4294967295)
+
+SdpIdType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "A 16-bit number used to identify a Service
+Distribution Point. This ID must be unique only
+within the ESR where it is defined. The value 0
+is used as the null ID."
+SYNTAX Unsigned32 (0|1..17407)
+
+TMEncapVal ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"A valid Vlan ID in the range 1-4093, or 65535."
+SYNTAX Unsigned32
+
+TSapEgrQueueId ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "The value used to uniquely identify a SAP egress queue.
+The actual valid values are those defined in the given
+SAP egress QoS policy."
+SYNTAX Unsigned32 (1..8) 
+
+TSapIngQueueId ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "The value used to uniquely identify a SAP ingress queue.
+The actual valid values are those defined in the given
+SAP ingress QoS policy."
+SYNTAX Unsigned32 (1..32) 
+
+-- --------------------------------------------------------------------
+-- Objects in the PRVT-SERV-MIB
+-- --------------------------------------------------------------------
+
+custNumEntries OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The current number of customer records configured
+in this device."
+::= { prvtTMCustObjs 1 }
+
+--
+-- Customer Table
+--
+
+custInfoTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CustInfoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains customer information."
+::= { prvtTMCustObjs 2 }
+
+custInfoEntry OBJECT-TYPE
+SYNTAX CustInfoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Information about a specific customer."
+INDEX { custName }
+::= { custInfoTable 1 }
+
+CustInfoEntry ::= SEQUENCE { 
+custName ServObjName,
+custRowStatus RowStatus,
+custContact ServObjDesc,
+custPhone ServObjDesc,
+custLastMgmtChange TimeStamp
+}
+
+custName OBJECT-TYPE
+SYNTAX ServObjName
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The name of this customer."
+DEFVAL { "" }
+::= { custInfoEntry 1 }
+
+custRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "This object indicates the status of this row."
+::= { custInfoEntry 2 }
+
+custContact OBJECT-TYPE
+SYNTAX ServObjDesc
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The name of the primary contact person for
+this customer."
+DEFVAL { "" }
+::= { custInfoEntry 3 }
+
+custPhone OBJECT-TYPE
+SYNTAX ServObjDesc
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The phone/pager number used to reach the
+primary contact person."
+DEFVAL { "" }
+::= { custInfoEntry 4 }
+
+custLastMgmtChange OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The value of sysUpTime at the time of the
+most recent management-initiated change to
+this customer."
+::= { custInfoEntry 5 }
+
+
+custMultiServiceSiteTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CustMultiServiceSiteEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Customer-multi-service-site-table."
+::= { prvtTMCustObjs 3 }
+
+custMultiServiceSiteEntry OBJECT-TYPE
+SYNTAX CustMultiServiceSiteEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Information about a specific customer's
+multi-service site."
+INDEX { custMultSvcSiteName }
+::= { custMultiServiceSiteTable 1 }
+
+CustMultiServiceSiteEntry ::= SEQUENCE {
+custMultSvcSiteName DisplayString,
+custMultSvcSiteRowStatus RowStatus,
+custMultSvcSiteDescription ServObjDesc,
+custMultSvcSiteIngressSchedulerPolicy ServObjName,
+custMultSvcSiteEgressSchedulerPolicy ServObjName,
+custMultSvcSiteLastMgmtChange TimeStamp
+}
+
+custMultSvcSiteName OBJECT-TYPE
+SYNTAX DisplayString (SIZE (1..9))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "Customer-multi-service-site-name."
+::= { custMultiServiceSiteEntry 1 }
+
+custMultSvcSiteRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Customer-multi-service-site rowStatus."
+::= { custMultiServiceSiteEntry 2 }
+
+custMultSvcSiteDescription OBJECT-TYPE
+SYNTAX ServObjDesc
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Generic information about this customer's
+Multi-Service Site."
+DEFVAL { ''H }
+::= { custMultiServiceSiteEntry 3 }
+
+
+custMultSvcSiteIngressSchedulerPolicy OBJECT-TYPE
+SYNTAX ServObjName
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The ingress QoS scheduler policy assigned
+to this Multi-Service Site."
+DEFVAL { ''H }
+::= { custMultiServiceSiteEntry 4 }
+
+custMultSvcSiteEgressSchedulerPolicy OBJECT-TYPE
+SYNTAX ServObjName
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The egress QoS scheduler policy assigned
+to this Multi-Service Site."
+DEFVAL { ''H }
+::= { custMultiServiceSiteEntry 5 }
+
+custMultSvcSiteLastMgmtChange OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The value of sysUpTime at the time of the
+most recent management-initiated change to
+this multi-service site."
+::= { custMultiServiceSiteEntry 6 }
+
+--
+-- Customer Multi-Service Site Ingress Statistics Table
+--
+
+custMultiSvcSiteIngQosSchedStatsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CustMultiSvcSiteIngQosSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains ingress QoS scheduler
+statistics for the customer multi service site."
+::= { prvtTMCustObjs 4 }
+
+custMultiSvcSiteIngQosSchedStatsEntry OBJECT-TYPE
+SYNTAX CustMultiSvcSiteIngQosSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Ingress statistics about a specific customer
+multi service site ingress scheduler."
+INDEX {custMultSvcSiteName, IMPLIED custIngQosSchedName }
+::= { custMultiSvcSiteIngQosSchedStatsTable 1 }
+
+CustMultiSvcSiteIngQosSchedStatsEntry ::= SEQUENCE {
+custIngQosSchedName TNamedItem,
+custIngQosSchedStatsForwardedPackets Counter32,
+custIngQosSchedStatsForwardedOctets Counter32
+}
+
+custIngQosSchedName OBJECT-TYPE
+SYNTAX TNamedItem
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "The index of the ingress QoS scheduler of
+this customer multi service site."
+::= { custMultiSvcSiteIngQosSchedStatsEntry 1 }
+
+custIngQosSchedStatsForwardedPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of forwarded packets, as
+determined by the customer multi service
+site ingress scheduler policy."
+::= { custMultiSvcSiteIngQosSchedStatsEntry 2 }
+
+custIngQosSchedStatsForwardedOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of forwarded octets, as
+determined by the customer multi service
+site ingress scheduler policy."
+::= { custMultiSvcSiteIngQosSchedStatsEntry 3 }
+
+--
+-- Customer Multi-Service Site Egress Statistics Table
+--
+
+custMultiSvcSiteEgrQosSchedStatsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CustMultiSvcSiteEgrQosSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains egress QoS scheduler
+statistics for the customer multi service site."
+::= { prvtTMCustObjs 5 }
+
+custMultiSvcSiteEgrQosSchedStatsEntry OBJECT-TYPE
+SYNTAX CustMultiSvcSiteEgrQosSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Egress statistics about a specific customer
+multi service site egress scheduler."
+INDEX { custMultSvcSiteName, IMPLIED custEgrQosSchedName }
+::= { custMultiSvcSiteEgrQosSchedStatsTable 1 }
+
+CustMultiSvcSiteEgrQosSchedStatsEntry ::= SEQUENCE {
+custEgrQosSchedName TNamedItem,
+custEgrQosSchedStatsForwardedPackets Counter32,
+custEgrQosSchedStatsForwardedOctets Counter32
+}
+
+custEgrQosSchedName OBJECT-TYPE
+SYNTAX TNamedItem
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "The index of the egress QoS scheduler of
+this customer multi service site."
+::= { custMultiSvcSiteEgrQosSchedStatsEntry 1 }
+
+custEgrQosSchedStatsForwardedPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of forwarded packets, as
+determined by the customer multi service
+site egress scheduler policy."
+::= { custMultiSvcSiteEgrQosSchedStatsEntry 2 }
+
+custEgrQosSchedStatsForwardedOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of forwarded octets, as
+determined by the customer multi service
+site egress scheduler policy."
+::= { custMultiSvcSiteEgrQosSchedStatsEntry 3 }
+
+--
+-- Customer Multi-Service Site Ingress Statistics Table
+-- with specific portId
+--
+
+custIngQosPortIdSchedStatsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CustIngQosPortIdSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"The custIngQosPortIdSchedStatsTable contains ingress QoS scheduler
+statistics for the customer multi service site."
+::= { prvtTMCustObjs 6 }
+
+custIngQosPortIdSchedStatsEntry OBJECT-TYPE
+SYNTAX CustIngQosPortIdSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"Each entry represents the ingress statistics about a specific customer
+multi service site ingress scheduler. Entries are created when 
+a scheduler policy is applied to an MSS."
+INDEX { custMultSvcSiteName,
+custIngQosPortIdSchedName, custIngQosAssignmentPortId }
+::= { custIngQosPortIdSchedStatsTable 1 }
+
+CustIngQosPortIdSchedStatsEntry ::= SEQUENCE {
+custIngQosPortIdSchedName TNamedItem,
+custIngQosAssignmentPortId Integer32,
+custIngQosPortSchedFwdPkts Counter32,
+custIngQosPortSchedFwdOctets Counter32
+}
+
+custIngQosPortIdSchedName OBJECT-TYPE
+SYNTAX TNamedItem
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"The value of custIngQosPortIdSchedName is used as an index 
+of the ingress QoS scheduler of this customer multi service site."
+::= { custIngQosPortIdSchedStatsEntry 1 }
+
+custIngQosAssignmentPortId OBJECT-TYPE
+SYNTAX Integer32 (0..2147483647)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"The value of custIngQosAssignmentPortId is used as an index
+of the ingress QoS scheduler of this customer multi service site.
+When an MSS assignment is an aps/ccag/lag in 'link' mode, each 
+member-port of the aps/ccag/lag has its own scheduler. This object
+refers to the portId of these member-ports."
+::= {custIngQosPortIdSchedStatsEntry 2}
+
+custIngQosPortSchedFwdPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION 
+"The value of custIngQosPortSchedStatsFwdPkts represents the
+number of forwarded packets, as determined by the customer multi service
+site ingress scheduler policy."
+::= { custIngQosPortIdSchedStatsEntry 3 }
+
+custIngQosPortSchedFwdOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION 
+"The value of custIngQosPortSchedStatsFwdOctets represents the
+number of forwarded octets, as determined by the customer multi service
+site ingress scheduler policy."
+::= { custIngQosPortIdSchedStatsEntry 4 }
+
+--
+-- Customer Multi-Service Site Egress Statistics Table
+-- with specific portId
+--
+
+custEgrQosPortIdSchedStatsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF CustEgrQosPortIdSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"The custEgrQosPortIdSchedStatsTable contains egress QoS scheduler
+statistics for the customer multi service site."
+::= { prvtTMCustObjs 7 }
+
+custEgrQosPortIdSchedStatsEntry OBJECT-TYPE
+SYNTAX CustEgrQosPortIdSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"Each row entry represents the egress statistics for a customer
+multi-service-site egress scheduler. Entries are created when 
+a scheduler policy is applied to an MSS."
+INDEX { custMultSvcSiteName,
+custEgrQosPortIdSchedName, custEgrQosAssignmentPortId }
+::= { custEgrQosPortIdSchedStatsTable 1 }
+
+CustEgrQosPortIdSchedStatsEntry ::= SEQUENCE {
+custEgrQosPortIdSchedName TNamedItem,
+custEgrQosAssignmentPortId Integer32,
+custEgrQosPortSchedFwdPkts Counter32,
+custEgrQosPortSchedFwdOctets Counter32
+}
+
+custEgrQosPortIdSchedName OBJECT-TYPE
+SYNTAX TNamedItem
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"The value of custEgrQosPortIdSchedName is used as an index 
+of the egress QoS scheduler of this customer multi service site."
+::= { custEgrQosPortIdSchedStatsEntry 1}
+
+custEgrQosAssignmentPortId OBJECT-TYPE
+SYNTAX Integer32 (0..2147483647)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION 
+"The value of custEgrQosAssignmentPortId is used as an index
+of the egress QoS scheduler of this customer multi service site.
+When an MSS assignment is an aps/ccag/lag in 'link' mode, each 
+member-port of the aps/ccag/lag has its own scheduler. This object
+refers to the portId of these member-ports."
+::= { custEgrQosPortIdSchedStatsEntry 2}
+
+custEgrQosPortSchedFwdPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION 
+"The value of custEgrQosPortSchedStatsFwdPkts represents the
+number of forwarded packets, as determined by the customer multi service
+site egress scheduler policy."
+::= { custEgrQosPortIdSchedStatsEntry 3 }
+
+custEgrQosPortSchedFwdOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The value of custEgrQosPortSchedStatsFwdOctets represents the
+number of forwarded octets, as determined by the customer multi service
+site egress scheduler policy."
+::= { custEgrQosPortIdSchedStatsEntry 4 }
+
+--
+-- Customer traps
+--
+
+prvtCustCreated NOTIFICATION-TYPE
+OBJECTS {
+custName
+}
+STATUS current
+DESCRIPTION "This trap is sent when a new row is created
+in the custInfoTable."
+::= { prvtCustTraps 1 }
+
+prvtCustDeleted NOTIFICATION-TYPE
+OBJECTS {
+custName
+}
+STATUS current
+DESCRIPTION "This trap is sent when an existing row is
+deleted from the custInfoTable."
+::= { prvtCustTraps 2 }
+
+-- --------------------------------------------------------------------
+-- prvtTMSvcObjs group
+-- --------------------------------------------------------------------
+
+svcNumEntries OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The current number of services configured on
+this node."
+::= { prvtTMSvcObjs 1 }
+
+--
+-- Base Service Table
+--
+
+svcBaseInfoTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SvcBaseInfoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains basic service information."
+::= { prvtTMSvcObjs 2 }
+
+svcBaseInfoEntry OBJECT-TYPE
+SYNTAX SvcBaseInfoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Basic information about a specific service."
+INDEX { svcId }
+::= { svcBaseInfoTable 1 }
+
+SvcBaseInfoEntry ::= SEQUENCE { 
+svcId Integer32,
+svcVpnId VpnId,
+svcRowStatus RowStatus,
+svcType ServType,
+svcDescription ServObjDesc, 
+svcMtu Integer32,
+svcAdminStatus ServiceAdminStatus,
+svcOperStatus ServiceOperStatus,
+svcNumSaps Integer32,
+svcNumSdps Integer32,
+svcLastMgmtChange TimeStamp,
+svcLastStatusChange TimeStamp,
+svcEnableSecureSaps TruthValue,
+svcCustName ServObjName,
+svcRevertTimer Unsigned32
+}
+svcId OBJECT-TYPE
+SYNTAX Integer32 (0..2147483647)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The service ID."
+DEFVAL { 0 }
+::= { svcBaseInfoEntry 1 }
+
+svcVpnId OBJECT-TYPE
+SYNTAX VpnId
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "This object specifies the ID used by Service Provider(SP). 
+It will have different format according to the type of 
+service. 
+This filed is mandatory. If all mandatory fields are 
+set, the row status object is automatically changed from notReady(3)
+to notInService(2) state
+"
+::= { svcBaseInfoEntry 2}
+
+svcRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "This object indicates the status of this row. The
+values supported during a set operation are 
+createAndWait(5), destroy(6), active(1), notInSertvice(2). 
+Service can be deleted any time. The transition between
+svcRowStatus active(1) and notInService(2) states 
+are rejected if svcAdminStatus is up(1). "
+::= { svcBaseInfoEntry 3 } 
+
+svcType OBJECT-TYPE
+SYNTAX ServType
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The service type: e.g. EtherPipe, TLS, etc. Currently only 
+vpls-pe(11), vpls-mtu(12), vpws-pe(9) and vpws-mtu(10) types 
+are supported. 
+This field is mandatory. 
+Note: For VPLS service, vpls-mtu is supported only."
+::= { svcBaseInfoEntry 4 }
+
+svcDescription OBJECT-TYPE
+SYNTAX ServObjDesc
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Generic information about this service."
+DEFVAL { "" }
+::= { svcBaseInfoEntry 5 } 
+
+svcMtu OBJECT-TYPE
+SYNTAX Integer32 (512..9216)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Not supported object"
+::= { svcBaseInfoEntry 6 }
+
+svcAdminStatus OBJECT-TYPE
+SYNTAX ServiceAdminStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The desired state of this service. 
+1. The transition from down(2) state to up(1) state can 
+be done only if svcRowStatus is either active(1) or 
+notInSercvice(2). 
+2. The transition from up(1) to down(2) state has to be 
+done in order to modify svcRowStatus object. "
+DEFVAL { down }
+::= { svcBaseInfoEntry 7 }
+
+svcOperStatus OBJECT-TYPE
+SYNTAX ServiceOperStatus
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The operating state of this service."
+::= { svcBaseInfoEntry 8 }
+
+svcNumSaps OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of SAPs defined on this service."
+::= { svcBaseInfoEntry 9 }
+
+svcNumSdps OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of SDPs bound to this service."
+::= { svcBaseInfoEntry 10 }
+
+svcLastMgmtChange OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The value of sysUpTime at the time of the
+most recent management-initiated change to
+this service."
+::= { svcBaseInfoEntry 11}
+
+svcLastStatusChange OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The value of sysUpTime at the time of the
+most recent operating status change to his
+service."
+::= { svcBaseInfoEntry 12 } 
+
+svcEnableSecureSaps OBJECT-TYPE 
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Used to configure the SAPs to forward only traffic from the uplink ports." 
+DEFVAL { false } 
+::= { svcBaseInfoEntry 13 } 
+
+svcCustName OBJECT-TYPE
+SYNTAX ServObjName
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The name of the customer this service belongs to."
+DEFVAL { "" }
+::= { svcBaseInfoEntry 14 }
+
+svcRevertTimer OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Delay before switching to primary pseudowire in seconds" 
+::= { svcBaseInfoEntry 15 }
+
+--
+-- VPLS Global parameters
+--
+
+svcVplsMode OBJECT-TYPE
+SYNTAX INTEGER {
+disable ( 0 ),
+qualified ( 1 ),
+unqualified ( 2 ),
+enable ( 3 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "This object is used to configure whether VPLS operates in 
+qualified or unqualified mode. Qualified and unqualified are not supported,
+when having per port qualified/unqualified." 
+DEFVAL { unqualified } 
+::= { prvtTMServVPLSGlobals 1 } 
+
+svcVPLSUplinkTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SvcVPLSUplinkEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains information about the VPLS uplink ports."
+::= { prvtTMServVPLSGlobals 2 }
+
+svcVPLSUplinkEntry OBJECT-TYPE
+SYNTAX SvcVPLSUplinkEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A particular VPLS uplink port."
+INDEX { svcVPLSUplinkPortID }
+::= { svcVPLSUplinkTable 1 }
+
+SvcVPLSUplinkEntry ::= SEQUENCE {
+svcVPLSUplinkPortID Integer32,
+svcVPLSUplinkIfIndex Integer32,
+svcVPLSUplinkNetworkPolicy TNetworkPolicyIdOrNone,
+svcVPLSUplinkNetworkQueueEgressPolicy TNamedItemOrEmpty,
+svcVPLSUplinkShaperProfile Integer32
+}
+
+svcVPLSUplinkPortID OBJECT-TYPE
+SYNTAX Integer32 (0..2147483647) 
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Unique uplink port index."
+::= { svcVPLSUplinkEntry 1 } 
+
+svcVPLSUplinkIfIndex OBJECT-TYPE
+SYNTAX Integer32 (0..2147483647)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The ifIndex of the uplink port."
+::= { svcVPLSUplinkEntry 2 } 
+
+svcVPLSUplinkNetworkPolicy OBJECT-TYPE
+SYNTAX TNetworkPolicyIdOrNone
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The network scheduler policy applied to the port."
+::= { svcVPLSUplinkEntry 3 }
+
+svcVPLSUplinkNetworkQueueEgressPolicy OBJECT-TYPE
+SYNTAX TNamedItemOrEmpty
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The network egress queue applied to the port."
+::= { svcVPLSUplinkEntry 4 }
+
+svcVPLSUplinkShaperProfile OBJECT-TYPE
+SYNTAX Integer32 (0..2)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The ID of the shaping profile applied to the port.
+0 indicates no shaping profile."
+::= { svcVPLSUplinkEntry 5 }
+
+--
+-- Service traps
+--
+
+prvtSvcCreated NOTIFICATION-TYPE
+OBJECTS {
+svcId
+}
+STATUS current
+DESCRIPTION "This trap is sent when a new row is created
+in the svcBaseInfoTable."
+::= { prvtSvcTraps 1 }
+
+prvtSvcDeleted NOTIFICATION-TYPE
+OBJECTS {
+svcId 
+}
+STATUS current
+DESCRIPTION "This trap is sent when an existing row is
+deleted from the svcBaseInfoTable."
+::= { prvtSvcTraps 2 }
+
+prvtSvcStatusChanged NOTIFICATION-TYPE
+OBJECTS { 
+svcId,
+svcVpnId,
+svcAdminStatus,
+svcOperStatus
+}
+STATUS current
+DESCRIPTION "The scvStatusChanged notification is generated when
+there is a change in the administrative or operating
+status of a service."
+::= { prvtSvcTraps 3 }
+
+-- --------------------------------------------------------------------
+-- prvtTMSapObjs group
+-- --------------------------------------------------------------------
+
+sapNumEntries OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The current number of SAPs configured in this
+device."
+::= { prvtTMSapObjs 1 }
+
+--
+-- Base SAP Table
+--
+
+sapBaseInfoTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SapBaseInfoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains basic SAP information."
+::= { prvtTMSapObjs 2 }
+
+sapBaseInfoEntry OBJECT-TYPE
+SYNTAX SapBaseInfoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Information about a specific SAP."
+INDEX { svcId, sapPortId, sapEncapValue }
+::= { sapBaseInfoTable 1 }
+
+SapBaseInfoEntry ::= SEQUENCE {
+sapPortId INTEGER,
+sapEncapValue TMEncapVal,
+sapRowStatus RowStatus,
+sapType ServType,
+sapDescription ServObjDesc,
+sapAdminStatus ServiceAdminStatus,
+sapOperStatus INTEGER,
+sapLastMgmtChange TimeStamp,
+sapOperFlags BITS, 
+sapCustMultSvcSiteName DisplayString,
+sapIngressQosPolicyId TSapIngressPolicyIdOrNone,
+sapEgressQosPolicyId TSapEgressPolicyIdOrNone,
+sapIngressQosSchedulerPolicy TNamedItemOrEmpty,
+sapEgressQosSchedulerPolicy TNamedItemOrEmpty,
+sapLearnMode INTEGER
+}
+
+sapPortId OBJECT-TYPE
+SYNTAX INTEGER (0..2147483647)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The ID of the access port where this SAP
+is defined."
+::= { sapBaseInfoEntry 1 }
+
+sapEncapValue OBJECT-TYPE
+SYNTAX TMEncapVal
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The value of the label used to identify this
+SAP on the access port specified by sapPortId."
+::= { sapBaseInfoEntry 2 }
+
+sapRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "This object indicates the status of this row. The
+values supported during a set operation are createAndGo(4) 
+active(1), notInService(2) and destroy(6).
+Saps can be deleted any time. The transition between
+svcRowStatus active(1) and notInService(2) states 
+are rejected if sapAdminStatus is up(1). 
+"
+::= { sapBaseInfoEntry 3 }
+
+sapType OBJECT-TYPE
+SYNTAX ServType 
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "This object indicates the type of service where
+this SAP is defined."
+::= { sapBaseInfoEntry 4 }
+
+sapDescription OBJECT-TYPE
+SYNTAX ServObjDesc
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Generic information about this SAP."
+DEFVAL { "" }
+::= { sapBaseInfoEntry 5 }
+
+sapAdminStatus OBJECT-TYPE
+SYNTAX ServiceAdminStatus
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The desired state of this SAP. 
+1. The value of this object depends on the value of svcAdminStatus 
+for the service this sap belongs to. If the sap is created and 
+its service has svcAdminStatus set to down(2), its own admin status 
+will be down(2), otherwise sapAdminStatus will be up(1).
+2. If sapRowStatus is in notInService state, the sapAdminStatus 
+transition from down(2) to up(1) state will automaticaly change the 
+value of the sapRowStatus object to active(1)"
+DEFVAL { up }
+::= { sapBaseInfoEntry 6 }
+
+sapOperStatus OBJECT-TYPE
+SYNTAX INTEGER {
+up(1),
+down(2),
+ingressQosMismatch(3),
+egressQosMismatch(4),
+svcAdminDown(5),
+portMtuTooSmall(6)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The operating state of this SAP, showing also the reason for the
+current operation state
+
+Values ingressQosMismatch(3),egressQosMismatch(4),svcAdminDown(5) 
+and portMtuTooSmall(6) are not supported"
+::= { sapBaseInfoEntry 7 }
+
+sapLastMgmtChange OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The value of sysUpTime at the time of the
+most recent management-initiated change to
+this SAP."
+::= { sapBaseInfoEntry 8 }
+
+sapOperFlags OBJECT-TYPE
+SYNTAX BITS {
+sapAdminDown(0), -- SAP is admin down
+svcAdminDown(1), -- Service is admin down
+portOperDown(2) -- Access port is oper down
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "This object specifies all the conditions that
+affect the operating status of this SAP."
+::= { sapBaseInfoEntry 9 } 
+
+sapCustMultSvcSiteName OBJECT-TYPE
+SYNTAX DisplayString (SIZE(0..9))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The value of this object, when not null, indicates
+the Multi-Service Site this SAP is a member of. This
+information is used to configure the ingress and
+egress QoS schedulers for this SAP."
+DEFVAL { ''H }
+::= { sapBaseInfoEntry 11 }
+
+sapIngressQosPolicyId OBJECT-TYPE
+SYNTAX TSapIngressPolicyIdOrNone
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The row index in the hqosSapIngressTable
+corresponding to this ingress QoS
+policy, or zero if no policy is specified."
+DEFVAL { 0 }
+::= { sapBaseInfoEntry 12 }
+
+sapEgressQosPolicyId OBJECT-TYPE
+SYNTAX TSapEgressPolicyIdOrNone
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The row index in the hqosSapEgressTable
+corresponding to this egress QoS policy,
+or zero if no policy is specified."
+DEFVAL { 0 }
+::= { sapBaseInfoEntry 13 }
+
+sapIngressQosSchedulerPolicy OBJECT-TYPE
+SYNTAX TNamedItemOrEmpty
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "This object can be set only when sapCustMultSvcSite
+is null. It indicates the ingress QoS scheduler for
+this SAP."
+DEFVAL { ''H }
+::= { sapBaseInfoEntry 14 }
+
+sapEgressQosSchedulerPolicy OBJECT-TYPE
+SYNTAX TNamedItemOrEmpty
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "This object can be set only when sapCustMultSvcSite
+is null. It indicates the egress QoS scheduler for
+this SAP."
+DEFVAL { ''H }
+::= { sapBaseInfoEntry 15 }
+
+sapLearnMode OBJECT-TYPE
+SYNTAX INTEGER {
+qualified ( 1 ),
+unqualified ( 2 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Sap learning mode. Currently supported as read-only."
+::= { sapBaseInfoEntry 16 }
+
+prvtSapCreated NOTIFICATION-TYPE
+OBJECTS {
+svcId,
+sapPortId,
+sapEncapValue
+}
+STATUS current
+DESCRIPTION "This trap is sent when a new row is created
+in the sapBaseInfoTable."
+::= { prvtSapTraps 1 }
+
+prvtSapDeleted NOTIFICATION-TYPE
+OBJECTS {
+svcId,
+sapPortId,
+sapEncapValue
+}
+STATUS current
+DESCRIPTION "This trap is sent when an existing row is
+deleted from the sapBaseInfoTable."
+::= { prvtSapTraps 2 }
+
+prvtSapStatusChanged NOTIFICATION-TYPE
+OBJECTS {
+svcId,
+sapPortId,
+sapEncapValue,
+sapAdminStatus,
+sapOperStatus
+}
+STATUS current
+DESCRIPTION "The sapStatusChanged notification is generated
+when there is a change in the administrative or
+operating status of an SAP."
+::= { prvtSapTraps 3 } 
+
+--
+-- Ingress QoS Queue SAP Statistics Table
+--
+
+sapIngQosQueueStatsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SapIngQosQueueStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains ingress QoS queue SAP
+statistics."
+::= { prvtTMSapObjs 3 }
+
+sapIngQosQueueStatsEntry OBJECT-TYPE
+SYNTAX SapIngQosQueueStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Ingress statistics about a specific SAP's
+QoS queue."
+INDEX { svcId, sapPortId, sapEncapValue, sapIngQosQueueId }
+::= { sapIngQosQueueStatsTable 1 }
+
+SapIngQosQueueStatsEntry ::= SEQUENCE {
+sapIngQosQueueId TSapIngQueueId,
+sapIngQosQueueStatsOfferedHiPrioPackets Counter32,
+sapIngQosQueueStatsOfferedLoPrioPackets Counter32,
+sapIngQosQueueStatsOfferedHiPrioOctets Counter32,
+sapIngQosQueueStatsOfferedLoPrioOctets Counter32,
+sapIngQosQueueStatsForwardedInProfPackets Counter32,
+sapIngQosQueueStatsForwardedOutProfPackets Counter32,
+sapIngQosQueueStatsForwardedInProfOctets Counter32,
+sapIngQosQueueStatsForwardedOutProfOctets Counter32,
+sapIngQosQueueStatsDroppedPackets Counter32,
+sapIngQosQueueStatsDroppedOctets Counter32,
+sapIngQosCustName ServObjName
+}
+
+sapIngQosQueueId OBJECT-TYPE
+SYNTAX TSapIngQueueId
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The index of the ingress QoS queue of
+this SAP."
+::= { sapIngQosQueueStatsEntry 1 }
+
+sapIngQosQueueStatsOfferedHiPrioPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of high priority packets,
+as determined by the SAP ingress QoS
+policy, offered by the service queue."
+::= { sapIngQosQueueStatsEntry 2 }
+
+sapIngQosQueueStatsOfferedLoPrioPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of low priority packets,
+as determined by the SAP ingress QoS
+policy, offered by the service queue."
+::= { sapIngQosQueueStatsEntry 3 }
+
+sapIngQosQueueStatsOfferedHiPrioOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of high priority octets,
+as determined by the SAP ingress QoS
+policy, offered by the service queue."
+::= { sapIngQosQueueStatsEntry 4 }
+
+sapIngQosQueueStatsOfferedLoPrioOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of low priority octets,
+as determined by the SAP ingress QoS
+policy, offered by the service queue."
+::= { sapIngQosQueueStatsEntry 5 }
+
+sapIngQosQueueStatsForwardedInProfPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of in-profile packets
+(rate below CIR) forwarded by the
+ingress service queue."
+::= { sapIngQosQueueStatsEntry 6 }
+
+sapIngQosQueueStatsForwardedOutProfPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of out-of-profile packets
+(rate above CIR) forwarded by the
+ingress service queue."
+::= { sapIngQosQueueStatsEntry 7 }
+
+sapIngQosQueueStatsForwardedInProfOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of in-profile octets
+(rate below CIR) forwarded by the
+ingress service queue."
+::= { sapIngQosQueueStatsEntry 8 }
+
+sapIngQosQueueStatsForwardedOutProfOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of out-of-profile octets
+(rate above CIR) forwarded by the
+ingress service queue."
+::= { sapIngQosQueueStatsEntry 9 }
+
+sapIngQosQueueStatsDroppedOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of octets
+discarded in the egress queue."
+::= { sapIngQosQueueStatsEntry 10 }
+
+sapIngQosQueueStatsDroppedPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of in-profile packets
+discarded by the Ingess queue."
+::= { sapIngQosQueueStatsEntry 11 }
+
+sapIngQosCustName OBJECT-TYPE
+SYNTAX ServObjName
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The Customer Name of the site this SAP belongs to."
+::= { sapIngQosQueueStatsEntry 12 }
+
+--
+-- Egress QoS Queue SAP Statistics Table
+--
+
+sapEgrQosQueueStatsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SapEgrQosQueueStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains egress QoS queue SAP
+statistics."
+::= { prvtTMSapObjs 4 }
+
+sapEgrQosQueueStatsEntry OBJECT-TYPE
+SYNTAX SapEgrQosQueueStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Egress statistics about a specific SAP's
+QoS queue."
+INDEX { svcId, sapPortId, sapEncapValue, sapEgrQosQueueId }
+::= { sapEgrQosQueueStatsTable 1 }
+
+SapEgrQosQueueStatsEntry ::= SEQUENCE {
+sapEgrQosQueueId TSapEgrQueueId,
+sapEgrQosQueueStatsForwardedInProfPackets Counter32,
+sapEgrQosQueueStatsForwardedOutProfPackets Counter32,
+sapEgrQosQueueStatsForwardedInProfOctets Counter32,
+sapEgrQosQueueStatsForwardedOutProfOctets Counter32,
+sapEgrQosQueueStatsDroppedPackets Counter32,
+sapEgrQosQueueStatsDroppedOctets Counter32,
+sapEgrQosCustName ServObjName
+}
+
+sapEgrQosQueueId OBJECT-TYPE
+SYNTAX TSapEgrQueueId
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The index of the egress QoS queue of
+this SAP."
+::= { sapEgrQosQueueStatsEntry 1 }
+
+sapEgrQosQueueStatsForwardedInProfPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of in-profile packets
+(rate below CIR) forwarded by the
+egress queue."
+::= { sapEgrQosQueueStatsEntry 2 }
+
+sapEgrQosQueueStatsForwardedOutProfPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of out-of-profile packets
+(rate above CIR) forwarded by the
+egress queue."
+::= { sapEgrQosQueueStatsEntry 3 }
+
+sapEgrQosQueueStatsForwardedInProfOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of in-profile octets
+(rate below CIR) forwarded by the
+egress queue."
+::= { sapEgrQosQueueStatsEntry 4 }
+
+sapEgrQosQueueStatsForwardedOutProfOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of out-of-profile octets
+(rate above CIR) forwarded by the
+egress queue."
+::= { sapEgrQosQueueStatsEntry 5 }
+
+sapEgrQosQueueStatsDroppedOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of octets
+discarded in the egress queue."
+::= { sapEgrQosQueueStatsEntry 6 }
+
+sapEgrQosQueueStatsDroppedPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of in-profile packets
+discarded by the egress queue."
+::= { sapEgrQosQueueStatsEntry 7 }
+
+sapEgrQosCustName OBJECT-TYPE
+SYNTAX ServObjName
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The Customer Name of the site this SAP belongs to."
+::= { sapEgrQosQueueStatsEntry 8 }
+
+--
+-- Ingress QoS Scheduler SAP Statistics Table
+--
+
+sapIngQosSchedStatsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SapIngQosSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains ingress QoS queue SAP
+statistics."
+::= { prvtTMSapObjs 5 }
+
+sapIngQosSchedStatsEntry OBJECT-TYPE
+SYNTAX SapIngQosSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Ingress statistics about a specific SAP's
+QoS queue."
+INDEX { svcId, sapPortId, sapEncapValue,
+IMPLIED sapIngQosSchedName }
+::= { sapIngQosSchedStatsTable 1 }
+
+SapIngQosSchedStatsEntry ::= SEQUENCE {
+sapIngQosSchedName TNamedItem,
+sapIngQosSchedStatsForwardedPackets Counter32,
+sapIngQosSchedStatsForwardedOctets Counter32,
+sapIngQosSchedCustName ServObjName
+}
+
+sapIngQosSchedName OBJECT-TYPE
+SYNTAX TNamedItem
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "The index of the ingress QoS scheduler of
+this SAP."
+::= { sapIngQosSchedStatsEntry 1 }
+
+sapIngQosSchedStatsForwardedPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of forwarded packets, as
+determined by the SAP ingress scheduler
+policy, offered by the Pchip to the
+Qchip."
+::= { sapIngQosSchedStatsEntry 2 }
+
+sapIngQosSchedStatsForwardedOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of forwarded octets,as
+determined by the SAP ingress schduler
+policy, offered by the Pchip to the
+Qchip."
+::= { sapIngQosSchedStatsEntry 3 }
+
+sapIngQosSchedCustName OBJECT-TYPE
+SYNTAX ServObjName
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The Customer Name of the site this SAP belongs to."
+::= { sapIngQosSchedStatsEntry 4 }
+
+--
+-- Egress QoS Scheduler SAP Statistics Table
+--
+
+sapEgrQosSchedStatsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SapEgrQosSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains ingress QoS queue SAP
+statistics."
+::= { prvtTMSapObjs 6 }
+
+sapEgrQosSchedStatsEntry OBJECT-TYPE
+SYNTAX SapEgrQosSchedStatsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Egress statistics about a specific SAP's
+QoS queue."
+INDEX { svcId, sapPortId, sapEncapValue,
+IMPLIED sapEgrQosSchedName }
+::= { sapEgrQosSchedStatsTable 1 }
+
+SapEgrQosSchedStatsEntry ::= SEQUENCE {
+sapEgrQosSchedName TNamedItem,
+sapEgrQosSchedStatsForwardedPackets Counter32,
+sapEgrQosSchedStatsForwardedOctets Counter32,
+sapEgrQosSchedCustName ServObjName
+}
+
+sapEgrQosSchedName OBJECT-TYPE
+SYNTAX TNamedItem
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "The index of the egress QoS scheduler of
+this SAP."
+::= { sapEgrQosSchedStatsEntry 1 }
+
+sapEgrQosSchedStatsForwardedPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of forwarded packets by the
+egress Qchip, as determined by the SAP
+egress scheduler policy."
+::= { sapEgrQosSchedStatsEntry 2 }
+
+sapEgrQosSchedStatsForwardedOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The number of forwarded octets by the
+egress Qchip, as determined by the SAP
+egress scheduler policy."
+::= { sapEgrQosSchedStatsEntry 3 }
+
+sapEgrQosSchedCustName OBJECT-TYPE
+SYNTAX ServObjName
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The Customer Name of the site this SAP belongs to."
+::= { sapEgrQosSchedStatsEntry 4 }
+
+-- --------------------------------------------------------------------
+-- prvtTMSdpObjs group
+-- --------------------------------------------------------------------
+
+sdpNumEntries OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The current number of SDPs configured in this
+device."
+::= { prvtTMSdpObjs 1 }
+
+sdpNextFreeId OBJECT-TYPE
+SYNTAX SdpIdType
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The next available value for sdpId."
+::= { prvtTMSdpObjs 2 }
+
+--
+-- SDP Table
+--
+
+sdpInfoTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SdpInfoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "A table that contains SDP information."
+::= { prvtTMSdpObjs 3 }
+
+sdpInfoEntry OBJECT-TYPE
+SYNTAX SdpInfoEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION "Information about a specific SDP."
+INDEX { svcId, sdpId }
+::= { sdpInfoTable 1 }
+
+SdpInfoEntry ::= SEQUENCE {
+sdpId SdpIdType,
+sdpRowStatus RowStatus,
+sdpDelivery INTEGER,
+sdpFarEndIpAddress IpAddress,
+sdpDescription ServObjDesc,
+sdpLabelSignaling INTEGER,
+sdpAdminStatus ServiceAdminStatus,
+sdpOperStatus INTEGER,
+sdpLastMgmtChange TimeStamp,
+sdpLdpEnabled TruthValue,
+sdpOperFlags BITS,
+sdpLastStatusChange TimeStamp,
+sdpAdminIngressLabel Unsigned32,
+sdpAdminEgressLabel Unsigned32,
+sdpAdminIsBackup TruthValue,
+sdpOperIsBackup TruthValue,
+sdpOutInterface Integer32,
+sdpGroupIdentifier Unsigned32,
+sdpTransportTunnelName DisplayString ,
+sdpVCType INTEGER,
+sdpType INTEGER,
+sdpMtu Integer32,
+sdpBindVlanTag Unsigned32,
+sdpIsPwStatusSignalingEnable TruthValue,
+sdpEpsAdminIsPrimary TruthValue,
+sdpEpsAdminIsSecondary TruthValue
+}
+
+sdpId OBJECT-TYPE
+SYNTAX SdpIdType
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "SDP identifier."
+::= { sdpInfoEntry 1 }
+
+sdpRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "This object indicates the status of this row. 
+1. The values supported during a set operation are 
+createAndWait(5), destroy(6), active(1), notInSertvice(2). 
+Sdps can be deleted any time. The transition between
+active(1) and notInService(2) states are rejected if 
+sdpAdminStatus is up(1). 
+"
+::= { sdpInfoEntry 2 }
+
+sdpDelivery OBJECT-TYPE
+SYNTAX INTEGER {
+gre(1),
+mpls(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "This object specifies the type of delivery used
+by this SDP.
+NOTE! Currently we support only mpls. The modification 
+of this obect will be rejected. " 
+DEFVAL { mpls }
+::= { sdpInfoEntry 3 }
+
+sdpFarEndIpAddress OBJECT-TYPE
+SYNTAX IpAddress
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "This object specifies the IP address of the
+remote end of the GRE or MPLS tunnel defined
+by this SDP. 
+
+This field is mandatory. If all mandatory fields are set, the 
+row status object is automatically changed from notReady(3)
+to notInService(2) state.
+"
+::= { sdpInfoEntry 4 }
+
+sdpDescription OBJECT-TYPE
+SYNTAX ServObjDesc
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "Generic information about this SDP."
+DEFVAL { "" }
+::= { sdpInfoEntry 5 }
+
+sdpLabelSignaling OBJECT-TYPE
+SYNTAX INTEGER {
+none(1),
+tldp(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "This object specifies the signaling protocol
+used to obtain the ingress and egress labels
+used in frames transmitted and received on
+this SDP. When the value of this object is
+none(1) then the labels are manually assigned
+at the time the SDP is configured. The
+value of this object can only be changed while
+the admin status of the SDP is down(2).
+
+This field is mandatory. If all mandatory fields are set, the 
+row status object is automatically changed from notReady(3)
+to notInService(2) state
+"
+DEFVAL { tldp }
+::= { sdpInfoEntry 6 }
+
+sdpAdminStatus OBJECT-TYPE
+SYNTAX ServiceAdminStatus
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The desired state of this SDP.
+1. The value of this object depends on the value of svcAdminStatus. 
+It will be rejected to set sdpAdminStatus to up(1), when svcAdminStatus
+is set to down(2).
+2. If sdpRowStatus is in notInService state, the transition of sdpAdminStatus 
+from down(2) to up(1) state will also automaticaly change the 
+value of the sdpRowStatus object to active(1)
+"
+DEFVAL { down }
+::= { sdpInfoEntry 7 }
+
+sdpOperStatus OBJECT-TYPE
+SYNTAX INTEGER {
+up(1),
+down(2),
+goingUp (3),
+tunnelDown (4),
+transportSelected (5),
+supressed (6)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The operating state of this SDP. 
+1. Sdp is up and running.
+2. Initial state. Entry is inactive.
+3. Peers are ready to select transport.
+4. There is no suitable transport.
+5. SDP is not operational due to local/remote SAP down or remote SDP has no transport.
+6. Sdp is up and ready to carry user traffic but it is not used at the moment (backup).
+"
+::= { sdpInfoEntry 8 }
+
+sdpLastMgmtChange OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The value of sysUpTime at the time of the
+most recent management-initiated change to
+this SDP."
+::= { sdpInfoEntry 9 }
+
+sdpLdpEnabled OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "When the value of this object is true(1)
+the transport LSP's are signalled by LDP,
+as opposed to being provisioned static or
+RSVP-signalled LSP's. This object applies
+only to MPLS SDP's."
+DEFVAL { false }
+::= { sdpInfoEntry 10 }
+
+sdpOperFlags OBJECT-TYPE
+SYNTAX BITS {
+sdpAdminDown(0),
+signalingSessionDown(1),
+transportTunnelDown(2),
+invalidEgressInterface(3),
+noSystemIpAddress(4)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "This object specifies all the conditions that
+affect the operating status of this SDP."
+::= { sdpInfoEntry 11 }
+
+sdpLastStatusChange OBJECT-TYPE
+SYNTAX TimeStamp
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "The value of sysUpTime at the time of the
+most recent operating status change to this
+SDP."
+::= { sdpInfoEntry 12 }
+
+sdpAdminIngressLabel OBJECT-TYPE
+SYNTAX Unsigned32 (0 | 1 | 2048..18431)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The static MPLS VC label used by the far-end device
+to send packets to this device in this service via
+this SDP."
+DEFVAL { 0 }
+::= { sdpInfoEntry 13 }
+
+sdpAdminEgressLabel OBJECT-TYPE
+SYNTAX Unsigned32 (0 | 16..1048575)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION "The static MPLS VC label used by this device to send
+packets to the far-end device in this service via
+this SDP."
+DEFVAL { 0 }
+::= { sdpInfoEntry 14 }
+
+sdpAdminIsBackup OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "This object is used in administratively to specify the preferred primary or backup state of this SDP.
+A value of false means this is the primary SDP.
+This field is mandatory if svcType is set to vpls-mtu(12) or vpws-mtu(10). 
+The sdpType must be set to spoke(2). If all mandatory fields are 
+set, the row status object is automatically changed from notReady(3) to 
+notInService(2) state."
+DEFVAL { false }
+::= { sdpInfoEntry 15 }
+
+sdpOperIsBackup OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "It represents the current operational state of this SDP as either active or backup. 
+A value of false means this is the active SDP. A value of true means that this SDP is
+in backup suppressed state."
+DEFVAL { false }
+::= { sdpInfoEntry 16 }
+
+sdpOutInterface OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "This object is valid only if the type of service is tls(3). 
+The ifIndex of the desired outbound interface for this SDP.
+
+This field is currently not supported. Its modification 
+will be rejected. 
+
+The default value is 0
+"
+DEFVAL { 0 }
+::= { sdpInfoEntry 17 } 
+
+sdpGroupIdentifier OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "This object is valid only if the type of service is tls(3). 
+The Group ID for this SDP. SDP's bound to the same service must have the same Group ID's."
+DEFVAL { 0 }
+::= { sdpInfoEntry 18 } 
+
+sdpTransportTunnelName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Optional transport tunnel name. For the SDP to be operational an entry must exist in 
+mplsTunnelTable with this name."
+DEFVAL { "" }
+::= { sdpInfoEntry 19 } 
+
+sdpVCType OBJECT-TYPE
+SYNTAX INTEGER
+{ 
+ethernet-vlan(4),
+ethernet(5)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "VC Type of the service."
+::= { sdpInfoEntry 20} 
+
+sdpType OBJECT-TYPE
+SYNTAX INTEGER
+{
+invalidType(0),
+generic(1),
+spoke(2),
+mesh(3),
+hub(4)
+}
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The type of this SDP.
+
+Currently the only supported sdp types are spoke(2) and mesh(3)
+
+This field is mandatory. If svcType is set to vpls-mtu(12) or vpws-mtu(10), 
+trying to set sdpType to mesh(3) will be rejected(Wring configuration). 
+If all mandatory fields are set, the row status object is automatically 
+changed from notReady(3) to notInService(2) state.
+"
+::= { sdpInfoEntry 21}
+
+sdpMtu OBJECT-TYPE
+SYNTAX Integer32 (512..9216)
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "The largest frame size (in octets) that this
+SDP can handle"
+::= { sdpInfoEntry 22}
+
+sdpBindVlanTag OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-write 
+
+STATUS current
+DESCRIPTION "Outgoing vlan."
+::= { sdpInfoEntry 23}
+
+sdpIsPwStatusSignalingEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION "Specifies if PW-status signalling is enabled per given SDP."
+::= { sdpInfoEntry 24}
+
+sdpEpsAdminIsPrimary OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "Administrative primary status if the specified SDP. If set to true, the SDP is the primary-link of the protection."
+    DEFVAL { false }
+::= { sdpInfoEntry 25 }
+
+sdpEpsAdminIsSecondary OBJECT-TYPE
+    SYNTAX TruthValue
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+        "Administrative secondary status if the specified SDP. If set to true, the SDP is the secondary-link of the protection."
+    DEFVAL { false }
+::= { sdpInfoEntry 26 }
+
+---notifications
+
+prvtSdpCreated NOTIFICATION-TYPE
+OBJECTS {
+svcId, sdpId
+}
+STATUS current
+DESCRIPTION "This trap is sent when a new row is created
+in the sdpInfoTable."
+::= { prvtSdpTraps 1 }
+
+prvtSdpDeleted NOTIFICATION-TYPE
+OBJECTS {
+svcId, sdpId
+}
+STATUS current
+DESCRIPTION "This trap is sent when an existing row is
+deleted from the sdpInfoTable."
+::= { prvtSdpTraps 2 }
+
+prvtSdpStatusChanged NOTIFICATION-TYPE
+OBJECTS {
+svcId,
+sdpId,
+sdpAdminStatus,
+sdpOperStatus
+}
+STATUS current
+DESCRIPTION "The sdpStatusChanged notification is generated
+when there is a change in the administrative or
+operating status of an SDP."
+::= { prvtSdpTraps 3 }
+
+-- ----------------------------------------------------------------------------
+-- Conformance Information
+-- ----------------------------------------------------------------------------
+
+prvtTMCustCompliances OBJECT IDENTIFIER ::= { prvtTMCustConformance 1 }
+prvtTMCustGroups OBJECT IDENTIFIER ::= { prvtTMCustConformance 2 }
+
+prvtTMSvcCompliances OBJECT IDENTIFIER ::= { prvtTMSvcConformance 1 }
+prvtTMSvcGroups OBJECT IDENTIFIER ::= { prvtTMSvcConformance 2 }
+
+prvtTMSapCompliances OBJECT IDENTIFIER ::= { prvtTMSapConformance 1 }
+prvtTMSapGroups OBJECT IDENTIFIER ::= { prvtTMSapConformance 2 }
+
+prvtTMSdpCompliances OBJECT IDENTIFIER ::= { prvtTMSdpConformance 1 }
+prvtTMSdpGroups OBJECT IDENTIFIER ::= { prvtTMSdpConformance 2 }
+
+-- ----------------------------------------------
+-- Compliance Statements
+-- ----------------------------------------------
+
+prvtTMCustCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for management of services customers
+on T-Metro series systems."
+MODULE -- this module
+MANDATORY-GROUPS
+{
+prvtTMCustGlobalGroup 
+}
+::= { prvtTMCustCompliances 1 }
+
+prvtTMSvcCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for management of services
+on T-Metro series systems."
+MODULE -- this module
+MANDATORY-GROUPS
+{
+prvtTMSvcGlobalGroup,
+prvtTMSvcNotificationGroup
+}
+::= { prvtTMSvcCompliances 1 }
+
+prvtTMSapCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for management of services SAPs
+on T-Metro series systems."
+MODULE -- this module
+MANDATORY-GROUPS {
+prvtTMSapGlobalGroup,
+prvtTMSapNotificationGroup
+}
+::= { prvtTMSapCompliances 1 }
+
+prvtTMSdpCompliance MODULE-COMPLIANCE
+STATUS current
+DESCRIPTION
+"The compliance statement for management of services SDPs
+on T-Metro series systems."
+MODULE -- this module
+MANDATORY-GROUPS {
+prvtTMSdpGlobalGroup
+}
+::= { prvtTMSdpCompliances 1 }
+
+-- ----------------------------------------------
+-- customer OBJECT-GROUPs
+-- ----------------------------------------------
+
+prvtTMCustGlobalGroup OBJECT-GROUP
+OBJECTS {
+custNumEntries,
+custName,
+custRowStatus,
+custContact,
+custPhone,
+custLastMgmtChange
+}
+STATUS current
+DESCRIPTION
+"The group of objects supporting management of Services customers
+general capabilities on T-Metro series systems."
+::= { prvtTMCustGroups 1 }
+
+-- ----------------------------------------------
+-- Services OBJECT-GROUPs
+-- ----------------------------------------------
+
+prvtTMSvcGlobalGroup OBJECT-GROUP
+OBJECTS {
+svcNumEntries,
+svcId,
+svcRowStatus,
+svcType,
+svcDescription,
+svcAdminStatus,
+svcOperStatus,
+svcNumSaps,
+svcNumSdps,
+svcLastMgmtChange,
+svcVpnId
+}
+STATUS current
+DESCRIPTION
+"The group of objects supporting management of Svc general
+capabilities on T-Metro series systems."
+::= { prvtTMSvcGroups 1 }
+
+prvtTMSvcNotificationGroup NOTIFICATION-GROUP
+NOTIFICATIONS {
+prvtSvcCreated,
+prvtSvcDeleted
+}
+STATUS current
+DESCRIPTION
+"The group of notifications supporting the Services
+on T-Metro series systems."
+::= { prvtTMSvcGroups 2 }
+
+-- ----------------------------------------------
+-- Service SAP OBJECT-GROUPs
+-- ----------------------------------------------
+
+prvtTMSapGlobalGroup OBJECT-GROUP
+OBJECTS {
+sapNumEntries,
+sapPortId,
+sapEncapValue,
+sapRowStatus,
+sapType,
+sapDescription,
+sapAdminStatus,
+sapOperStatus,
+sapIngressQosPolicyId,
+sapEgressQosPolicyId,
+sapLastMgmtChange
+}
+STATUS current
+DESCRIPTION
+"The group of objects supporting management of Services SAP general
+capabilities on T-Metro series systems."
+::= { prvtTMSapGroups 1 }
+
+prvtTMSapNotificationGroup NOTIFICATION-GROUP
+NOTIFICATIONS {
+prvtSapStatusChanged,
+prvtSapCreated,
+prvtSapDeleted
+}
+STATUS current
+DESCRIPTION
+"The group of notifications supporting the Sap feature
+on T-Metro series systems."
+::= { prvtTMSapGroups 2 }
+
+-- ----------------------------------------------
+-- Service SDP OBJECT-GROUPs
+-- ----------------------------------------------
+
+prvtTMSdpGlobalGroup OBJECT-GROUP
+OBJECTS {
+sdpNumEntries,
+sdpId,
+sdpNextFreeId,
+sdpRowStatus,
+sdpDelivery,
+sdpFarEndIpAddress,
+sdpDescription,
+sdpLabelSignaling,
+sdpAdminStatus,
+sdpOperStatus,
+sdpLastMgmtChange,
+sdpLdpEnabled 
+}
+STATUS current
+DESCRIPTION
+"The group of objects supporting management of Services SDP general
+capabilities on T-Metro series systems."
+::= { prvtTMSdpGroups 1 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-STATISTICS-CES-MIB b/MIBS/telco-systems/binos/PRVT-STATISTICS-CES-MIB
new file mode 100644
index 0000000..61bdf04
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-STATISTICS-CES-MIB
@@ -0,0 +1,2187 @@
+PRVT-STATISTICS-CES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE
+FROM SNMPv2-SMI
+dsx1CurrentEntry,
+dsx1IntervalEntry,
+dsx1TotalEntry,
+dsx1FarEndCurrentEntry,
+dsx1FarEndIntervalEntry,
+dsx1FarEndTotalEntry
+FROM DS1-MIB
+sonetSectionCurrentEntry, sonetSectionIntervalEntry,
+sonetLineCurrentEntry, sonetLineIntervalEntry,
+sonetFarEndLineCurrentEntry, sonetFarEndLineIntervalEntry,
+sonetPathCurrentEntry, sonetPathIntervalEntry,
+sonetFarEndPathCurrentEntry, sonetFarEndPathIntervalEntry,
+sonetVTCurrentEntry, sonetVTIntervalEntry,
+sonetFarEndVTCurrentEntry, sonetFarEndVTIntervalEntry
+FROM SONET-MIB
+
+PerfCurrentCount,
+PerfIntervalCount, PerfTotalCount
+FROM PerfHist-TC-MIB -- [RFC3593]
+
+ifIndex
+FROM IF-MIB
+switch
+FROM PRVT-SWITCH-MIB
+TEXTUAL-CONVENTION
+FROM SNMPv2-TC; -- RFC2579
+
+
+
+prvtStatisticsCESMib MODULE-IDENTITY
+
+LAST-UPDATED "200904070000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+DESCRIPTION
+"This module includes statistics that are not inlcluded in SONET-mib and
+DS1-MIB."
+
+
+REVISION "200904070000Z"
+DESCRIPTION
+"Initial version."
+::= { switch 114 }
+
+
+-- This is the MIB module for Private Statistics Objects --
+
+-- ----------------------------------------------------------------------------
+-- Groups
+-- ----------------------------------------------------------------------------
+
+prvtStatisticsNotifications OBJECT IDENTIFIER ::= { prvtStatisticsCESMib 0 }
+
+prvtStatisticsObjects OBJECT IDENTIFIER ::= { prvtStatisticsCESMib 1 }
+
+prvtStatisticsConformance OBJECT IDENTIFIER ::= { prvtStatisticsCESMib 2 }
+
+
+-- -----------------------------------------------------------------------------
+-- prvtStatisticsObjects
+-- -----------------------------------------------------------------------------
+prvtStatisticsDSx1 OBJECT IDENTIFIER ::= { prvtStatisticsObjects 1}
+
+prvtStatisticsSection OBJECT IDENTIFIER ::= { prvtStatisticsObjects 2}
+
+prvtStatisticsLine OBJECT IDENTIFIER ::= { prvtStatisticsObjects 3}
+
+prvtStatisticsPath OBJECT IDENTIFIER ::= { prvtStatisticsObjects 4}
+
+prvtStatisticsVt OBJECT IDENTIFIER ::= { prvtStatisticsObjects 5}
+
+
+-- the DSx1 group
+-- this group contains 4 table
+-- -DSx1 current table
+-- -DSx1 total table
+-- -DSx1 FarEnd current table
+-- -DSx1 FarEnd total table
+
+-- -DSx1 current table
+
+prvtDSx1CurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtDSx1CurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in dsx1CurrentTable "
+::= { prvtStatisticsDSx1 1 }
+
+
+prvtDSx1CurrentEntry OBJECT-TYPE
+SYNTAX PrvtDSx1CurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtDSx1CurrentTable table."
+AUGMENTS { dsx1CurrentEntry }
+::= { prvtDSx1CurrentTable 1 }
+
+PrvtDSx1CurrentEntry ::= SEQUENCE{
+prvtDSx1CurrentBBEs PerfCurrentCount,
+prvtDSx1CurrentLSESs PerfCurrentCount,
+prvtDSx1CurrentPFCs PerfCurrentCount
+}
+
+prvtDSx1CurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Background Block Errors."
+::= {prvtDSx1CurrentEntry 1}
+
+prvtDSx1CurrentLSESs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Line Severely Errored Seconds"
+::= {prvtDSx1CurrentEntry 2}
+
+prvtDSx1CurrentPFCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Path Faults counts."
+::= {prvtDSx1CurrentEntry 3}
+
+
+prvtDSx1IntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtDSx1IntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in dsx1IntervalTable "
+::= { prvtStatisticsDSx1 2 }
+
+
+prvtDSx1IntervalEntry OBJECT-TYPE
+SYNTAX PrvtDSx1IntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtDSx1IntervalTable table."
+AUGMENTS { dsx1IntervalEntry }
+::= { prvtDSx1IntervalTable 1 }
+
+PrvtDSx1IntervalEntry ::= SEQUENCE{
+prvtDSx1IntervalBBEs PerfIntervalCount,
+prvtDSx1IntervalLSESs PerfIntervalCount,
+prvtDSx1IntervalPFCs PerfIntervalCount
+}
+
+prvtDSx1IntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Background Block Errors."
+::= {prvtDSx1IntervalEntry 1}
+
+prvtDSx1IntervalLSESs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Line Severely Errored Seconds"
+::= {prvtDSx1IntervalEntry 2}
+
+prvtDSx1IntervalPFCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Path Faults counts."
+::= {prvtDSx1IntervalEntry 3}
+
+
+-- -DSx1 total table
+prvtDSx1TotalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtDSx1TotalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in dsx1TotalTable "
+::= { prvtStatisticsDSx1 3 }
+
+prvtDSx1TotalEntry OBJECT-TYPE
+SYNTAX PrvtDSx1TotalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtDSx1TotalTable table."
+AUGMENTS { dsx1TotalEntry }
+::= { prvtDSx1TotalTable 1 }
+
+PrvtDSx1TotalEntry ::= SEQUENCE{
+prvtDSx1TotalBBEs PerfTotalCount,
+prvtDSx1TotalLSESs PerfTotalCount,
+prvtDSx1TotalPFCs PerfTotalCount
+}
+
+prvtDSx1TotalBBEs OBJECT-TYPE
+SYNTAX PerfTotalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Background Block Errors encountered by a DS1 interface in the previous 24
+hour interval. Invalid 15 minute intervals count
+as 0."
+::= {prvtDSx1TotalEntry 1}
+
+prvtDSx1TotalLSESs OBJECT-TYPE
+SYNTAX PerfTotalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Line Severely Errored Seconds encountered by a DS1 interface in the previous 24
+hour interval. Invalid 15 minute intervals count
+as 0."
+::= { prvtDSx1TotalEntry 2}
+
+prvtDSx1TotalPFCs OBJECT-TYPE
+SYNTAX PerfTotalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Path Faults counts ncountered by a DS1 interface in the previous 24
+hour interval. Invalid 15 minute intervals count
+as 0."
+::= {prvtDSx1TotalEntry 3}
+
+
+-- -DSx1FarEndCurrentTable
+prvtDSx1FarEndCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtDSx1FarEndCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in dsx1FarEndCurrentTable "
+::= { prvtStatisticsDSx1 4 }
+
+prvtDSx1FarEndCurrentEntry OBJECT-TYPE
+SYNTAX PrvtDSx1FarEndCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtDSx1FarEndCurrentTable table."
+AUGMENTS { dsx1FarEndCurrentEntry }
+::= { prvtDSx1FarEndCurrentTable 1 }
+
+PrvtDSx1FarEndCurrentEntry ::= SEQUENCE{
+prvtFarEndDSx1CurrentBBEs PerfCurrentCount,
+prvtFarEndDSx1CurrentPFCs PerfCurrentCount
+}
+
+prvtFarEndDSx1CurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Far End Background Block Errors."
+::= {prvtDSx1FarEndCurrentEntry 1}
+
+
+prvtFarEndDSx1CurrentPFCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Background Path Faults counts."
+::= {prvtDSx1FarEndCurrentEntry 2}
+
+
+-- -DSx1FarEndIntervalTable
+prvtDSx1FarEndIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtDSx1FarEndIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in dsx1FarEndIntervalTable "
+::= { prvtStatisticsDSx1 5 }
+
+prvtDSx1FarEndIntervalEntry OBJECT-TYPE
+SYNTAX PrvtDSx1FarEndIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtDSx1FarEndIntervalTable table."
+AUGMENTS { dsx1FarEndIntervalEntry }
+::= { prvtDSx1FarEndIntervalTable 1 }
+
+PrvtDSx1FarEndIntervalEntry ::= SEQUENCE{
+prvtFarEndDSx1IntervalBBEs PerfIntervalCount,
+prvtFarEndDSx1IntervalPFCs PerfIntervalCount
+}
+
+prvtFarEndDSx1IntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Far End Background Block Errors."
+::= {prvtDSx1FarEndIntervalEntry 1}
+
+
+prvtFarEndDSx1IntervalPFCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Background Path Faults counts."
+::= {prvtDSx1FarEndIntervalEntry 2}
+
+
+
+-- -DSx1FarEndTotalTable
+prvtDSx1FarEndTotalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtDSx1FarEndTotalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in dsx1FarEndTotalTable "
+::= { prvtStatisticsDSx1 6 }
+
+prvtDSx1FarEndTotalEntry OBJECT-TYPE
+SYNTAX PrvtDSx1FarEndTotalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtDSx1FarEndTotalTable table."
+AUGMENTS { dsx1FarEndTotalEntry }
+::= { prvtDSx1FarEndTotalTable 1 }
+
+
+PrvtDSx1FarEndTotalEntry ::= SEQUENCE{
+prvtFarEndDSx1TotalBBEs PerfTotalCount,
+prvtFarEndDSx1TotalPFCs PerfTotalCount
+}
+
+prvtFarEndDSx1TotalBBEs OBJECT-TYPE
+SYNTAX PerfTotalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Far End Background Block Errors encountered by a DS1 interface in the
+previous 24 hour interval. Invalid 15 minute
+intervals count as 0."
+::= {prvtDSx1FarEndTotalEntry 1}
+
+prvtFarEndDSx1TotalPFCs OBJECT-TYPE
+SYNTAX PerfTotalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Background Path Faults encountered by a DS1 interface in the
+previous 24 hour interval. Invalid 15 minute
+intervals count as 0."
+::= {prvtDSx1FarEndTotalEntry 2}
+
+
+-- -SectionCurrentTable
+prvtSectionCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtSectionCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetSectionCurrentTable "
+::= { prvtStatisticsSection 1 }
+
+prvtSectionCurrentEntry OBJECT-TYPE
+SYNTAX PrvtSectionCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtSectionCurrentTable table."
+AUGMENTS { sonetSectionCurrentEntry }
+::= { prvtSectionCurrentTable 1 }
+
+PrvtSectionCurrentEntry ::= SEQUENCE{
+prvtSectionCurrentBBEs PerfCurrentCount,
+prvtSectionCurrentESAs PerfCurrentCount,
+prvtSectionCurrentESBs PerfCurrentCount,
+prvtSectionCurrentUASs PerfCurrentCount,
+prvtSectionCurrentLOSSs PerfCurrentCount,
+prvtSectionCurrentOOFs PerfCurrentCount
+
+}
+
+prvtSectionCurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Background Block Errors encountered by a SONET/SDH Section
+in the current 15 minute interval."
+::= {prvtSectionCurrentEntry 1}
+
+prvtSectionCurrentESAs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Errored Seconds type A encountered by a SONET/SDH Section
+in the current 15 minute interval."
+::= {prvtSectionCurrentEntry 2}
+
+prvtSectionCurrentESBs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Errored Seconds type B encountered by a SONET/SDH Section
+in the current 15 minute interval."
+::= {prvtSectionCurrentEntry 3}
+
+prvtSectionCurrentUASs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Unavailable Seconds encountered by a SONET/SDH Section
+in the current 15 minute interval."
+::= {prvtSectionCurrentEntry 4}
+
+prvtSectionCurrentLOSSs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Loss of signals counter in the current 15 minute interval."
+::= {prvtSectionCurrentEntry 5}
+
+prvtSectionCurrentOOFs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number Out-Of-Frame Seconds encountered by a SONET/SDH Section
+in the current 15 minute interval."
+::= {prvtSectionCurrentEntry 6}
+
+
+-- -SectionIntervalTable
+prvtSectionIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtSectionIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetSectionIntervalTable "
+::= { prvtStatisticsSection 2 }
+
+prvtSectionIntervalEntry OBJECT-TYPE
+SYNTAX PrvtSectionIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtSectionIntervalTable table."
+AUGMENTS { sonetSectionIntervalEntry }
+::= { prvtSectionIntervalTable 1 }
+
+PrvtSectionIntervalEntry ::= SEQUENCE{
+prvtSectionIntervalBBEs PerfIntervalCount,
+prvtSectionIntervalESAs PerfIntervalCount,
+prvtSectionIntervalESBs PerfIntervalCount,
+prvtSectionIntervalUASs PerfIntervalCount,
+prvtSectionIntervalLOSSs PerfIntervalCount,
+prvtSectionIntervalOOFs PerfIntervalCount
+
+}
+
+prvtSectionIntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Background Block Errors encountered by a SONET/SDH Section
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtSectionIntervalEntry 1}
+
+prvtSectionIntervalESAs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Errored Seconds type A encountered by a SONET/SDH Section
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtSectionIntervalEntry 2}
+
+prvtSectionIntervalESBs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Errored Seconds type B encountered by a SONET/SDH Section
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtSectionIntervalEntry 3}
+
+prvtSectionIntervalUASs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Unavailable Seconds encountered by a SONET/SDH Section
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtSectionIntervalEntry 4}
+
+prvtSectionIntervalLOSSs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Loss of signals counter in a particular 15-minute interval in the past 24 hours."
+::= {prvtSectionIntervalEntry 5}
+
+prvtSectionIntervalOOFs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number Out-Of-Frame Seconds encountered by a SONET/SDH Section
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtSectionIntervalEntry 6}
+
+
+-- -LineCurrentTable
+prvtLineCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtLineCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetLineCurrentTable "
+::= { prvtStatisticsLine 1 }
+
+prvtLineCurrentEntry OBJECT-TYPE
+SYNTAX PrvtLineCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtLineCurrentTable table."
+AUGMENTS { sonetLineCurrentEntry }
+::= { prvtLineCurrentTable 1 }
+
+PrvtLineCurrentEntry ::= SEQUENCE{
+prvtLineCurrentFCs PerfCurrentCount,
+prvtLineCurrentBBEs PerfCurrentCount,
+prvtLineCurrentESAs PerfCurrentCount,
+prvtLineCurrentESBs PerfCurrentCount,
+prvtLineCurrentLBCs PerfCurrentCount,
+prvtLineCurrentOPRs PerfCurrentCount,
+prtvLineCurrentOPTs PerfCurrentCount,
+prvtLineCurrentAISs PerfCurrentCount,
+prvtLineCurrentPSCs PerfCurrentCount,
+prvtLineCurrentPSDs PerfCurrentCount
+
+}
+
+prvtLineCurrentFCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Failures counter of a SONET/SDH Line
+in the current 15 minute interval."
+::= {prvtLineCurrentEntry 1}
+
+prvtLineCurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Background Block Errors of a SONET/SDH Line
+in the current 15 minute interval."
+::= {prvtLineCurrentEntry 2}
+
+prvtLineCurrentESAs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Errored Seconds type A encountered by a SONET/SDH Line
+in the current 15 minute interval."
+::= {prvtLineCurrentEntry 3}
+
+prvtLineCurrentESBs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Errored Seconds type B encountered by a SONET/SDH Line
+in the current 15 minute interval."
+::= {prvtLineCurrentEntry 4}
+
+prvtLineCurrentLBCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Laser Bias Current parameter provides a measurement of the health of
+the optical transmitter."
+::= {prvtLineCurrentEntry 5}
+
+prvtLineCurrentOPRs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Optical Power Received parameter provides a measurement of the physical
+layer characteristics of the incoming signal at each optical receiver."
+::= {prvtLineCurrentEntry 6}
+
+prtvLineCurrentOPTs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Optical Power Transmitted parameter provides a measurement of the
+health of the optical transmitter."
+::= {prvtLineCurrentEntry 7}
+
+prvtLineCurrentAISs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of 1-second intervals of alarm indication
+signal encountered by the interface."
+::= {prvtLineCurrentEntry 8}
+
+prvtLineCurrentPSCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Protection Switching Countin the current 15 minute interval."
+::= {prvtLineCurrentEntry 9}
+
+prvtLineCurrentPSDs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Protection Switching Duration counter in the current 15 minute interval."
+::= {prvtLineCurrentEntry 10}
+
+
+-- -LineIntervalTable
+prvtLineIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtLineIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetLineIntrevalTable "
+::= { prvtStatisticsLine 2 }
+
+prvtLineIntervalEntry OBJECT-TYPE
+SYNTAX PrvtLineIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtLineIntervalTable table."
+AUGMENTS { sonetLineIntervalEntry }
+::= { prvtLineIntervalTable 1 }
+
+PrvtLineIntervalEntry ::= SEQUENCE{
+prvtLineIntervalFCs PerfIntervalCount,
+prvtLineIntervalBBEs PerfIntervalCount,
+prvtLineIntervalESAs PerfIntervalCount,
+prvtLineIntervalESBs PerfIntervalCount,
+prvtLineIntervalLBCs PerfIntervalCount,
+prvtLineIntervalOPRs PerfIntervalCount,
+prtvLineIntervalOPTs PerfIntervalCount,
+prvtLineIntevalAISs PerfIntervalCount,
+prvtLineIntervalPSCs PerfIntervalCount,
+prvtLineIntervalPSDs PerfIntervalCount
+
+}
+
+prvtLineIntervalFCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Failures counter of a SONET/SDH Line in a particular 15-minute interval
+in the past 24 hours."
+::= {prvtLineIntervalEntry 1}
+
+prvtLineIntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Background Block Errors of a SONET/SDH Line
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 2}
+
+prvtLineIntervalESAs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Errored Seconds type A encountered by a SONET/SDH Line
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 3}
+
+prvtLineIntervalESBs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of Errored Seconds type B encountered by a SONET/SDH Line
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 4}
+
+prvtLineIntervalLBCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Laser Bias Current parameter provides a measurement of the health of
+the optical transmitter in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 5}
+
+prvtLineIntervalOPRs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Optical Power Received parameter provides a measurement of the physical
+layer characteristics of the incoming signal at each optical receiver
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 6}
+
+prtvLineIntervalOPTs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Optical Power Transmitted parameter provides a measurement of the
+health of the optical transmitter
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 7}
+
+prvtLineIntevalAISs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of 1-second intervals of alarm indication
+signal encountered by the interface in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 8}
+
+prvtLineIntervalPSCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Protection Switching counter in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 9}
+
+prvtLineIntervalPSDs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Protection Switching Duration counter in a particular 15-minute interval in the past 24 hours."
+::= {prvtLineIntervalEntry 10}
+
+
+-- -LineFarEndCurrentTable
+prvtFarEndLineCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtFarEndLineCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetFarEndLineCurrentTable "
+::= { prvtStatisticsLine 3 }
+
+prvtFarEndLineCurrentEntry OBJECT-TYPE
+SYNTAX PrvtFarEndLineCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtFarEndLineCurrentTable table."
+AUGMENTS { sonetFarEndLineCurrentEntry }
+::= { prvtFarEndLineCurrentTable 1 }
+
+PrvtFarEndLineCurrentEntry ::= SEQUENCE {
+prvtFarEndLineCurrentFCs PerfCurrentCount,
+prvtFarEndLineCurrentBBEs PerfCurrentCount,
+prvtFarEndLineCurrentESAs PerfCurrentCount,
+prvtFarEndLineCurrentESBs PerfCurrentCount,
+prvtFarEndLineCurrentAISs PerfCurrentCount,
+prvtFarEndLineCurrentRFIs PerfCurrentCount
+}
+
+prvtFarEndLineCurrentFCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH Line
+in the current 15 minute interval."
+::= {prvtFarEndLineCurrentEntry 1}
+
+
+prvtFarEndLineCurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of Background Block Errors of a SONET/SDH Line
+in the current 15 minute interval."
+::= {prvtFarEndLineCurrentEntry 2}
+
+prvtFarEndLineCurrentESAs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of Errored Seconds type A encountered by a SONET/SDH Section
+in the current 15 minute interval."
+::= {prvtFarEndLineCurrentEntry 3}
+
+prvtFarEndLineCurrentESBs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of Errored Seconds type B encountered by a SONET/SDH Section
+in the current 15 minute interval."
+::= {prvtFarEndLineCurrentEntry 4}
+
+prvtFarEndLineCurrentAISs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of 1-second intervals of alarm indication
+signal encountered by the interface."
+::= {prvtFarEndLineCurrentEntry 5}
+
+
+prvtFarEndLineCurrentRFIs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number Remote failure indications of SONET/SDH Line
+in the current 15 minute interval."
+::= {prvtFarEndLineCurrentEntry 6}
+
+
+-- -LineFarEndIntervalTable
+prvtFarEndLineIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtFarEndLineIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetFarEndLineIntervalTable "
+::= { prvtStatisticsLine 4 }
+
+prvtFarEndLineIntervalEntry OBJECT-TYPE
+SYNTAX PrvtFarEndLineIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtFarEndLineIntervalTable table."
+AUGMENTS { sonetFarEndLineIntervalEntry }
+::= { prvtFarEndLineIntervalTable 1 }
+
+PrvtFarEndLineIntervalEntry ::= SEQUENCE {
+prvtFarEndLineIntervalFCs PerfIntervalCount,
+prvtFarEndLineIntervalBBEs PerfIntervalCount,
+prvtFarEndLineIntervalESAs PerfIntervalCount,
+prvtFarEndLineIntervalESBs PerfIntervalCount,
+prvtFarEndLineIntervalAISs PerfIntervalCount,
+prvtFarEndLineIntervalRFIs PerfIntervalCount
+}
+
+prvtFarEndLineIntervalFCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH Line
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndLineIntervalEntry 1}
+
+
+prvtFarEndLineIntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of Background Block Errors of a SONET/SDH Line
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndLineIntervalEntry 2}
+
+prvtFarEndLineIntervalESAs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of Errored Seconds type A encountered by a SONET/SDH Section
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndLineIntervalEntry 3}
+
+prvtFarEndLineIntervalESBs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of Errored Seconds type B encountered by a SONET/SDH Section
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndLineIntervalEntry 4}
+
+prvtFarEndLineIntervalAISs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of 1-second intervals of alarm indication
+signal encountered by the interface."
+::= {prvtFarEndLineIntervalEntry 5}
+
+
+prvtFarEndLineIntervalRFIs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number Remote failure indications of SONET/SDH Line
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndLineIntervalEntry 6}
+
+
+
+-- -PathCurrentTable
+prvtPathCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtPathCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetPathCurrentTable "
+::= { prvtStatisticsPath 1 }
+
+prvtPathCurrentEntry OBJECT-TYPE
+SYNTAX PrvtPathCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtPathCurrentTable table."
+AUGMENTS { sonetPathCurrentEntry }
+::= { prvtPathCurrentTable 1 }
+
+PrvtPathCurrentEntry ::= SEQUENCE{
+prvtPathCurrentFCs PerfCurrentCount,
+prvtPathCurrentESAs PerfCurrentCount,
+prvtPathCurrentESBs PerfCurrentCount,
+prvtPathCurrentBBEs PerfCurrentCount,
+prvtPathCurrentAISs PerfCurrentCount,
+prvtPathCurrentPPJCPGen PerfCurrentCount,
+prvtPathCurrentNPJCPGen PerfCurrentCount,
+prvtPathCurrentPPJCPDet PerfCurrentCount,
+prvtPathCurrentNPJCPDet PerfCurrentCount,
+prvtPathCurrentPJCSPDet PerfCurrentCount,
+prvtPathCurrentPJCSPGen PerfCurrentCount,
+prvtPathCurrentJCDiffP PerfCurrentCount
+
+
+}
+
+prvtPathCurrentFCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 1}
+
+
+prvtPathCurrentESAs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type A encountered by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 2}
+
+
+prvtPathCurrentESBs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type B encountered by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 3}
+
+prvtPathCurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Background Block Errors of a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 4}
+
+prvtPathCurrentAISs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of 1-second intervals of alarm indication
+signal encountered by a SONET/SDH Path in the current 15 minute interval."
+::= {prvtPathCurrentEntry 5}
+
+prvtPathCurrentPPJCPGen OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Positive pointer justifications generated by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 6}
+
+prvtPathCurrentNPJCPGen OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Negative pointer justifications generated by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 7}
+
+prvtPathCurrentPPJCPDet OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Positive pointer justifications detected by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 8}
+
+prvtPathCurrentNPJCPDet OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Negative pointer justifications detected by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 9}
+
+prvtPathCurrentPJCSPDet OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of PPJCVDet or NPJCVDet Seconds encountered by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 10}
+
+prvtPathCurrentPJCSPGen OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of PPJCVGen or NPJCVGen Seconds encountered by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtPathCurrentEntry 11}
+
+prvtPathCurrentJCDiffP OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Absolute of difference between detected and generated net pointer
+justifications by a SONET/SDH Path in the current 15 minute interval."
+::= {prvtPathCurrentEntry 12}
+
+
+
+-- -PathIntervalTable
+prvtPathIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtPathIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetPathIntervalTable "
+::= { prvtStatisticsPath 2 }
+
+prvtPathIntervalEntry OBJECT-TYPE
+SYNTAX PrvtPathIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtPathIntervalEntry table."
+AUGMENTS { sonetPathIntervalEntry }
+::= { prvtPathIntervalTable 1 }
+
+PrvtPathIntervalEntry ::= SEQUENCE{
+prvtPathIntervalFCs PerfIntervalCount,
+prvtPathIntervalESAs PerfIntervalCount,
+prvtPathIntervalESBs PerfIntervalCount,
+prvtPathIntervalBBEs PerfIntervalCount,
+prvtPathIntervalAISs PerfIntervalCount,
+prvtPathIntervalPPJCPGen PerfIntervalCount,
+prvtPathIntervalNPJCPGen PerfIntervalCount,
+prvtPathIntervalPPJCPDet PerfIntervalCount,
+prvtPathIntervalNPJCPDet PerfIntervalCount,
+prvtPathIntervalPJCSPDet PerfIntervalCount,
+prvtPathIntervalPJCSPGen PerfIntervalCount,
+prvtPathIntervalJCDiffP PerfIntervalCount
+
+}
+
+prvtPathIntervalFCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 1}
+
+
+prvtPathIntervalESAs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type A encountered by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 2}
+
+
+prvtPathIntervalESBs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type B encountered by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 3}
+
+prvtPathIntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number of Background Block Errors of a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 4}
+
+prvtPathIntervalAISs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of 1-second intervals of alarm indication
+signal encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 5}
+
+prvtPathIntervalPPJCPGen OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Positive pointer justifications generated by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 6}
+
+prvtPathIntervalNPJCPGen OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Negativ pointer justifications generated by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 7}
+
+prvtPathIntervalPPJCPDet OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Positive pointer justifications detected by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 8}
+
+prvtPathIntervalNPJCPDet OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Negative pointer justifications detected by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 9}
+
+prvtPathIntervalPJCSPDet OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of PPJCVDet or NPJCVDet Seconds encountered by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 10}
+
+prvtPathIntervalPJCSPGen OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of PPJCVGen or NPJCVGen Seconds encountered by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 11}
+
+prvtPathIntervalJCDiffP OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Absolute of difference between detected and generated net pointer
+justifications by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours."
+::= {prvtPathIntervalEntry 12}
+
+
+-- -FarEndPathCurrentTable
+prvtFarEndPathCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtFarEndPathCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetFarEndPathCurrentTable "
+::= { prvtStatisticsPath 3 }
+
+prvtFarEndPathCurrentEntry OBJECT-TYPE
+SYNTAX PrvtFarEndPathCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtFarEndPathCurrentTable table."
+AUGMENTS { sonetFarEndPathCurrentEntry }
+::= { prvtFarEndPathCurrentTable 1 }
+
+PrvtFarEndPathCurrentEntry ::= SEQUENCE{
+prvtFarEndPathCurrentFCs PerfCurrentCount,
+prvtFarEndPathCurrentESAs PerfCurrentCount,
+prvtFarEndPathCurrentESBs PerfCurrentCount,
+prvtFarEndPathCurrentBBEs PerfCurrentCount,
+prvtFarEndPathCurrentRFIs PerfCurrentCount
+
+}
+
+prvtFarEndPathCurrentFCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtFarEndPathCurrentEntry 1}
+
+
+prvtFarEndPathCurrentESAs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Errored Seconds type A encountered by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtFarEndPathCurrentEntry 2}
+
+
+prvtFarEndPathCurrentESBs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Errored Seconds type B encountered by a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtFarEndPathCurrentEntry 3}
+
+prvtFarEndPathCurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Background Block Errors of a SONET/SDH Path
+in the current 15 minute interval."
+::= {prvtFarEndPathCurrentEntry 4}
+
+prvtFarEndPathCurrentRFIs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number Remote failure indications of SONET/SDH Path
+signal encountered by a SONET/SDH Path in the current 15 minute interval."
+::= {prvtFarEndPathCurrentEntry 5}
+
+
+
+-- -FarEndPathIntervalTable
+prvtFarEndPathIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtFarEndPathIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetFarEndPathIntervalTable "
+::= { prvtStatisticsPath 4 }
+
+prvtFarEndPathIntervalEntry OBJECT-TYPE
+SYNTAX PrvtFarEndPathIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtFarEndPathIntervalTable table."
+AUGMENTS { sonetFarEndPathIntervalEntry }
+::= { prvtFarEndPathIntervalTable 1 }
+
+PrvtFarEndPathIntervalEntry ::= SEQUENCE{
+prvtFarEndPathIntervalFCs PerfIntervalCount,
+prvtFarEndPathIntervalESAs PerfIntervalCount,
+prvtFarEndPathIntervalESBs PerfIntervalCount,
+prvtFarEndPathIntervalBBEs PerfIntervalCount,
+prvtFarEndPathIntervalRFIs PerfIntervalCount
+
+}
+
+prvtFarEndPathIntervalFCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndPathIntervalEntry 1}
+
+
+prvtFarEndPathIntervalESAs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Errored Seconds type A encountered by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndPathIntervalEntry 2}
+
+
+prvtFarEndPathIntervalESBs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Errored Seconds type B encountered by a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndPathIntervalEntry 3}
+
+prvtFarEndPathIntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Background Block Errors of a SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndPathIntervalEntry 4}
+
+prvtFarEndPathIntervalRFIs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number Remote failure indications of SONET/SDH Path
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndPathIntervalEntry 5}
+
+
+-- -VtCurrentTable
+prvtVtCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtVtCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetVtCurrentTable "
+::= { prvtStatisticsVt 1 }
+
+prvtVtCurrentEntry OBJECT-TYPE
+SYNTAX PrvtVtCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtVtCurrentTable table."
+AUGMENTS { sonetVTCurrentEntry }
+::= { prvtVtCurrentTable 1 }
+
+PrvtVtCurrentEntry ::= SEQUENCE{
+prvtVtCurrentFCs PerfCurrentCount,
+prvtVtCurrentESAs PerfCurrentCount,
+prvtVtCurrentESBs PerfCurrentCount,
+prvtVtCurrentBBEs PerfCurrentCount,
+prvtVtCurrentAISs PerfCurrentCount,
+prvtVtCurrentPPJCVGen PerfCurrentCount,
+prvtVtCurrentNPJCVGen PerfCurrentCount,
+prvtVtCurrentPPJCVDet PerfCurrentCount,
+prvtVtCurrentNPJCVDet PerfCurrentCount,
+prvtVtCurrentPJCSVDet PerfCurrentCount,
+prvtVtCurrentPJCSVGen PerfCurrentCount,
+prvtVtCurrentPJCSVPJCDiffV PerfCurrentCount
+
+}
+
+prvtVtCurrentFCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH VT
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 1}
+
+
+prvtVtCurrentESAs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type A encountered by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 2}
+
+
+prvtVtCurrentESBs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type B encountered by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 3}
+
+prvtVtCurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Background Block Errors encountered by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 4}
+
+prvtVtCurrentAISs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of 1-second intervals of alarm indication
+signal encountered by a SONET/SDH Vt in the current 15 minute interval"
+::= {prvtVtCurrentEntry 5}
+
+prvtVtCurrentPPJCVGen OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Positive pointer justifications generated by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 6}
+
+prvtVtCurrentNPJCVGen OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Negative pointer justifications generated by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 7}
+
+prvtVtCurrentPPJCVDet OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Positive pointer justifications detected by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 8}
+
+prvtVtCurrentNPJCVDet OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Negative pointer justifications detected by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 9}
+
+prvtVtCurrentPJCSVDet OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of PPJCVDet or NPJCVDet Seconds encountered by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 10}
+
+prvtVtCurrentPJCSVGen OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of PPJCVGen or NPJCVGen Seconds encountered by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtVtCurrentEntry 11}
+
+prvtVtCurrentPJCSVPJCDiffV OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Absolute of difference between detected and generated net pointer
+justifications by a SONET/SDH Vt in the current 15 minute interval."
+::= {prvtVtCurrentEntry 12}
+
+
+
+
+-- -VtIntervalTable
+prvtVtIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtVtIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetVtIntervalTable "
+::= { prvtStatisticsVt 2 }
+
+prvtVtIntervalEntry OBJECT-TYPE
+SYNTAX PrvtVtIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtVtIntervalTable table."
+AUGMENTS { sonetVTIntervalEntry }
+::= { prvtVtIntervalTable 1 }
+
+PrvtVtIntervalEntry ::= SEQUENCE{
+prvtVtIntervalFCs PerfIntervalCount,
+prvtVtIntervalESAs PerfIntervalCount,
+prvtVtIntervalESBs PerfIntervalCount,
+prvtVtIntervalBBEs PerfIntervalCount,
+prvtVtIntervalAISs PerfIntervalCount,
+prvtVtIntervalPPJCVGen PerfIntervalCount,
+prvtVtIntervalNPJCVGen PerfIntervalCount,
+prvtVtIntervalPPJCVDet PerfIntervalCount,
+prvtVtIntervalNPJCVDet PerfIntervalCount,
+prvtVtIntervalPJCSVDet PerfIntervalCount,
+prvtVtIntervalPJCSVGen PerfIntervalCount,
+prvtVtIntervalPJCSVPJCDiffV PerfIntervalCount
+
+
+}
+
+prvtVtIntervalFCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Failures counter of a SONET/SDH VT
+in the current 15 minute interval."
+::= {prvtVtIntervalEntry 1}
+
+
+prvtVtIntervalESAs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type A encountered by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 2}
+
+
+prvtVtIntervalESBs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type B encountered by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 3}
+
+prvtVtIntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Background Block Errors encountered by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 4}
+
+prvtVtIntervalAISs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Number of 1-second intervals of alarm indication
+signal encountered by a SONET/SDH Vt in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 5}
+
+prvtVtIntervalPPJCVGen OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Positive pointer justifications generated by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 6}
+
+prvtVtIntervalNPJCVGen OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Negative pointer justifications generated by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 7}
+
+prvtVtIntervalPPJCVDet OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Positive pointer justifications detected by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 8}
+
+prvtVtIntervalNPJCVDet OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Negative pointer justifications detected by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 9}
+
+prvtVtIntervalPJCSVDet OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of PPJCVDet or NPJCVDet Seconds encountered by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 10}
+
+prvtVtIntervalPJCSVGen OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of PPJCVGen or NPJCVGen Seconds encountered by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 11}
+
+prvtVtIntervalPJCSVPJCDiffV OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Absolute of difference between detected and generated net pointer
+justifications by a SONET/SDH Vt in a particular 15-minute interval in the past 24 hours."
+::= {prvtVtIntervalEntry 12}
+
+
+
+
+-- -FarEndVtCurrentTable
+prvtFarEndVtCurrentTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtFarEndVtCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetFarEndVtCurrentTable "
+::= { prvtStatisticsVt 3 }
+
+prvtFarEndVtCurrentEntry OBJECT-TYPE
+SYNTAX PrvtFarEndVtCurrentEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtFarEndVtCurrentTable table."
+AUGMENTS { sonetFarEndVTCurrentEntry }
+::= { prvtFarEndVtCurrentTable 1 }
+
+PrvtFarEndVtCurrentEntry ::= SEQUENCE{
+prvtFarEndVtCurrentFCs PerfCurrentCount,
+prvtFarEndVtCurrentESAs PerfCurrentCount,
+prvtFarEndVtCurrentESBs PerfCurrentCount,
+prvtFarEndVtCurrentBBEs PerfCurrentCount,
+prvtFarEndVtCurrentRFIs PerfCurrentCount
+
+}
+
+prvtFarEndVtCurrentFCs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH VT
+in the current 15 minute interval."
+::= {prvtFarEndVtCurrentEntry 1}
+
+
+prvtFarEndVtCurrentESAs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type A encountered by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtFarEndVtCurrentEntry 2}
+
+
+prvtFarEndVtCurrentESBs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type B encountered by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtFarEndVtCurrentEntry 3}
+
+prvtFarEndVtCurrentBBEs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Background Block Errors encountered by a SONET/SDH Vt
+in the current 15 minute interval."
+::= {prvtFarEndVtCurrentEntry 4}
+
+prvtFarEndVtCurrentRFIs OBJECT-TYPE
+SYNTAX PerfCurrentCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number Remote failure indications of SONET/SDH Vt
+signal encountered by a SONET/SDH Vt in the current 15 minute interval."
+::= {prvtFarEndVtCurrentEntry 5}
+
+
+
+-- -FarEndVtIntervalTable
+prvtFarEndVtIntervalTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtFarEndVtIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains statistics that are not supported in sonetFarEndVtIntervalTable "
+::= { prvtStatisticsVt 4 }
+
+prvtFarEndVtIntervalEntry OBJECT-TYPE
+SYNTAX PrvtFarEndVtIntervalEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the prvtFarEndVtIntervalTable table."
+AUGMENTS { sonetFarEndVTIntervalEntry }
+::= { prvtFarEndVtIntervalTable 1 }
+
+PrvtFarEndVtIntervalEntry ::= SEQUENCE{
+prvtFarEndVtIntervalFCs PerfIntervalCount,
+prvtFarEndVtIntervalESAs PerfIntervalCount,
+prvtFarEndVtIntervalESBs PerfIntervalCount,
+prvtFarEndVtIntervalBBEs PerfIntervalCount,
+prvtFarEndVtIntervalRFIs PerfIntervalCount
+
+}
+
+prvtFarEndVtIntervalFCs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Failures counter of a SONET/SDH VT
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndVtIntervalEntry 1}
+
+
+prvtFarEndVtIntervalESAs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type A encountered by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndVtIntervalEntry 2}
+
+
+prvtFarEndVtIntervalESBs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Errored Seconds type B encountered by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndVtIntervalEntry 3}
+
+prvtFarEndVtIntervalBBEs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End Background Block Errors encountered by a SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndVtIntervalEntry 4}
+
+prvtFarEndVtIntervalRFIs OBJECT-TYPE
+SYNTAX PerfIntervalCount
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Far End number Remote failure indications of SONET/SDH Vt
+in a particular 15-minute interval in the past 24 hours."
+::= {prvtFarEndVtIntervalEntry 5}
+
+
+
+SonetLineAlarmType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "Type of Sonet Line alarm:
+sonetAlarmLineMSAIS (1)
+sonetAlarmLineLAIS (2)
+sonetAlarmLineMSRDI(3)
+sonetAlarmLineLRDI(4)"
+SYNTAX INTEGER{
+sonetAlarmLineMSAIS (1),
+sonetAlarmLineLAIS (2),
+sonetAlarmLineMSRDI(3),
+sonetAlarmLineLRDI(4)
+}
+
+
+SonetSectionAlarmType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "Type of Sonet Section alarm:
+sonetAlarmSectionLOS (5)
+sonetAlarmSectionLOF (6)
+sonetAlarmSectionRSLOF (7) "
+SYNTAX INTEGER{
+sonetAlarmSectionLOS (5),
+sonetAlarmSectionLOF (6),
+sonetAlarmSectionRSLOF (7)
+}
+
+SonetPathAlarmType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "Type of Sonet Path alarm:
+sonetAlarmPathLOP (8)
+sonetAlarmPathAIS (9)
+sonetAlarmPathRDI (10)
+sonetAlarmPathUNEQUIPPED (11)
+sonetAlarmPathLABELMISMATCH (12) "
+SYNTAX INTEGER{
+sonetAlarmPathLOP (8),
+sonetAlarmPathAIS (9),
+sonetAlarmPathRDI (10),
+sonetAlarmPathUNEQUIPPED (11),
+sonetAlarmPathLABELMISMATCH (12)
+}
+
+
+SonetVTAlarmType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "Type of Sonet VT alarm:
+sonetAlarmVtTULOP (13)
+sonetAlarmVtVLOP (14)
+sonetAlarmVtTUAIS (15)
+sonetAlarmVtVAIS (16)
+sonetAlarmVtLPRDI (17)
+sonetAlarmVtVRDI (18)
+sonetAlarmVtLPRFI (19)
+sonetAlarmVtVRFI (20)
+sonetAlarmVtLPUNEQUIPPED (21)
+sonetAlarmVtVUNEQUIPPED (22)
+sonetAlarmVtLPLBLMISMATCH (23)
+sonetAlarmVtVLBLMISMATCH (24)"
+SYNTAX INTEGER{
+sonetAlarmVtTULOP (13),
+sonetAlarmVtVLOP (14),
+sonetAlarmVtTUAIS (15),
+sonetAlarmVtVAIS (16),
+sonetAlarmVtLPRDI (17),
+sonetAlarmVtVRDI (18),
+sonetAlarmVtLPRFI (19),
+sonetAlarmVtVRFI (20),
+sonetAlarmVtLPUNEQUIPPED (21),
+sonetAlarmVtVUNEQUIPPED (22),
+sonetAlarmVtLPLBLMISMATCH (23),
+sonetAlarmVtVLBLMISMATCH (24)
+}
+
+
+SonetAlarmStatus ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION "Sonet alarm status:
+sonetAlarmDown (0)
+sonetAlarmUp (1) "
+SYNTAX INTEGER{
+sonetAlarmDown (0),
+sonetAlarmUp (1)
+}
+
+prvtSonetSectionAlarmsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtSonetSectionAlarmsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Sonet Section alarms table"
+::= { prvtStatisticsSection 3 }
+
+prvtSonetSectionAlarmsEntry OBJECT-TYPE
+SYNTAX PrvtSonetSectionAlarmsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Sonet Section alarms"
+INDEX { ifIndex }
+::= { prvtSonetSectionAlarmsTable 1 }
+
+PrvtSonetSectionAlarmsEntry ::= SEQUENCE{
+prvtSonetSectionAlarmType SonetSectionAlarmType,
+prvtSonetSectionAlarmStatus SonetAlarmStatus
+}
+
+prvtSonetSectionAlarmType OBJECT-TYPE
+SYNTAX SonetSectionAlarmType
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Type of Sonet Section alarm:
+sonetAlarmSectionLOS (5)
+sonetAlarmSectionLOF (6)
+sonetAlarmSectionRSLOF (7) "
+::= {prvtSonetSectionAlarmsEntry 1}
+
+prvtSonetSectionAlarmStatus OBJECT-TYPE
+SYNTAX SonetAlarmStatus
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Sonet Section alarm status:
+sonetAlarmDown (0)
+sonetAlarmUp (1) "
+::= {prvtSonetSectionAlarmsEntry 2}
+
+prvtSonetLineAlarmsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtSonetLineAlarmsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Sonet Line alarms table"
+::= { prvtStatisticsLine 5 }
+
+prvtSonetLineAlarmsEntry OBJECT-TYPE
+SYNTAX PrvtSonetLineAlarmsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Sonet Line alarms entry"
+INDEX { ifIndex }
+::= { prvtSonetLineAlarmsTable 1 }
+
+PrvtSonetLineAlarmsEntry ::= SEQUENCE{
+prvtSonetLineAlarmType SonetLineAlarmType,
+prvtSonetLineAlarmStatus SonetAlarmStatus
+}
+
+prvtSonetLineAlarmType OBJECT-TYPE
+SYNTAX SonetLineAlarmType
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Type of Sonet Line alarm:
+sonetAlarmLineMSAIS (1)
+sonetAlarmLineLAIS (2)
+sonetAlarmLineMSRDI(3)
+sonetAlarmLineLRDI(4)"
+::= {prvtSonetLineAlarmsEntry 1}
+
+prvtSonetLineAlarmStatus OBJECT-TYPE
+SYNTAX SonetAlarmStatus
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Sonet Line alarm status:
+sonetAlarmDown (0)
+sonetAlarmUp (1) "
+::= {prvtSonetLineAlarmsEntry 2}
+
+
+prvtSonetPathAlarmsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtSonetPathAlarmsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Sonet Path alarms table"
+::= { prvtStatisticsPath 5 }
+
+prvtSonetPathAlarmsEntry OBJECT-TYPE
+SYNTAX PrvtSonetPathAlarmsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Sonet Path alarms entry"
+INDEX { ifIndex }
+::= { prvtSonetPathAlarmsTable 1 }
+
+PrvtSonetPathAlarmsEntry ::= SEQUENCE{
+prvtSonetPathAlarmType SonetPathAlarmType,
+prvtSonetPathAlarmStatus SonetAlarmStatus
+}
+
+prvtSonetPathAlarmType OBJECT-TYPE
+SYNTAX SonetPathAlarmType
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION "Type of Sonet Path alarm:
+sonetAlarmPathLOP (8)
+sonetAlarmPathAIS (9)
+sonetAlarmPathRDI (10)
+sonetAlarmPathUNEQUIPPED (11)
+sonetAlarmPathLABELMISMATCH (12) "
+::= {prvtSonetPathAlarmsEntry 1}
+
+prvtSonetPathAlarmStatus OBJECT-TYPE
+SYNTAX SonetAlarmStatus
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Sonet Path alarm status:
+sonetAlarmDown (0)
+sonetAlarmUp (1) "
+::= {prvtSonetPathAlarmsEntry 2}
+
+prvtSonetVTAlarmsTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtSonetVTAlarmsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Sonet VT alarms table"
+::= { prvtStatisticsVt 5 }
+
+prvtSonetVTAlarmsEntry OBJECT-TYPE
+SYNTAX PrvtSonetVTAlarmsEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Sonet VT alarms entry"
+INDEX { ifIndex }
+::= { prvtSonetVTAlarmsTable 1 }
+
+PrvtSonetVTAlarmsEntry ::= SEQUENCE{
+prvtSonetVTAlarmType SonetVTAlarmType,
+prvtSonetVTAlarmStatus SonetAlarmStatus
+}
+
+prvtSonetVTAlarmType OBJECT-TYPE
+SYNTAX SonetVTAlarmType
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION "Type of Sonet VT alarm:
+sonetAlarmVtTULOP (13)
+sonetAlarmVtVLOP (14)
+sonetAlarmVtTUAIS (15)
+sonetAlarmVtVAIS (16)
+sonetAlarmVtLPRDI (17)
+sonetAlarmVtVRDI (18)
+sonetAlarmVtLPRFI (19)
+sonetAlarmVtVRFI (20)
+sonetAlarmVtLPUNEQUIPPED (21)
+sonetAlarmVtVUNEQUIPPED (22)
+sonetAlarmVtLPLBLMISMATCH (23)
+sonetAlarmVtVLBLMISMATCH (24)"
+::= {prvtSonetVTAlarmsEntry 1}
+
+prvtSonetVTAlarmStatus OBJECT-TYPE
+SYNTAX SonetAlarmStatus
+MAX-ACCESS accessible-for-notify
+STATUS current
+DESCRIPTION
+"Sonet VT alarm status:
+sonetAlarmDown (0)
+sonetAlarmUp (1) "
+::= {prvtSonetVTAlarmsEntry 2}
+
+
+prvtSonetSectionAlarms NOTIFICATION-TYPE
+OBJECTS {
+ifIndex,
+prvtSonetSectionAlarmType,
+prvtSonetSectionAlarmStatus
+}
+STATUS current
+DESCRIPTION "This trap is sent when a Sonet Section alarm is up or down"
+::= { prvtStatisticsNotifications 1 }
+
+prvtSonetLineAlarms NOTIFICATION-TYPE
+OBJECTS {
+ifIndex,
+prvtSonetLineAlarmType,
+prvtSonetLineAlarmStatus
+}
+STATUS current
+DESCRIPTION "This trap is sent when a Sonet Line alarm is up or down"
+::= { prvtStatisticsNotifications 2 }
+
+prvtSonetPathAlarms NOTIFICATION-TYPE
+OBJECTS {
+ifIndex,
+prvtSonetPathAlarmType,
+prvtSonetPathAlarmStatus
+}
+STATUS current
+DESCRIPTION "This trap is sent when a Sonet Path alarm is up or down"
+::= { prvtStatisticsNotifications 3 }
+
+prvtSonetVTAlarms NOTIFICATION-TYPE
+OBJECTS {
+ifIndex,
+prvtSonetVTAlarmType,
+prvtSonetVTAlarmStatus
+}
+STATUS current
+DESCRIPTION "This trap is sent when a Sonet VT alarm is up or down"
+::= { prvtStatisticsNotifications 4 }
+
+
+--
+-- Conformance Information
+--
+
+END
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/MIBS/telco-systems/binos/PRVT-STATISTICSHISTORY-MIB b/MIBS/telco-systems/binos/PRVT-STATISTICSHISTORY-MIB
new file mode 100644
index 0000000..a52d101
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-STATISTICSHISTORY-MIB
@@ -0,0 +1,1015 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-STATISTICSHISTORY-MIB
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-STATISTICSHISTORY-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-STATISTICSHISTORY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Counter32,
+Unsigned32, 
+Counter64,
+Gauge32,
+IpAddress
+FROM SNMPv2-SMI
+
+MODULE-COMPLIANCE, 
+OBJECT-GROUP, 
+NOTIFICATION-GROUP
+FROM SNMPv2-CONF
+
+DisplayString,
+TruthValue
+FROM SNMPv2-TC -- [RFC2579]
+
+InterfaceIndex, ifIndex
+FROM IF-MIB
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+    -------------------------------------------------------------------------------
+    --     PRIVATE BRANCH 
+    -------------------------------------------------------------------------------
+
+prvtStatisticsHistoryMib MODULE-IDENTITY
+    LAST-UPDATED "201002030000Z"
+    ORGANIZATION "BATM Advanced Communication"
+    CONTACT-INFO 
+         "BATM/Telco Systems Support team
+            Email: 
+            For North America: techsupport@telco.com
+            For North Europe: support@batm.de, info@batm.de
+            For the rest of the world: techsupport@telco.com"
+    DESCRIPTION
+            "Management Information Base module for StatisticsHistory "
+
+   -- revision history       
+    REVISION     "201002030000Z"
+    DESCRIPTION 
+    "Initial revision."
+   ::= { switch 140 }
+
+
+prvtStatisticsHistoryNotifications            OBJECT IDENTIFIER ::= { prvtStatisticsHistoryMib 0 }
+prvtStatisticsHistoryObjects                  OBJECT IDENTIFIER ::= { prvtStatisticsHistoryMib 1 }
+prvtStatisticsHistoryConformance              OBJECT IDENTIFIER ::= { prvtStatisticsHistoryMib 2 }
+
+--
+-- STATISTICS HISTORY Objects
+--
+
+prvtStatisticsHistoryCfg            	OBJECT IDENTIFIER ::= { prvtStatisticsHistoryObjects 1 }
+prvtStatHistDailySnapshotData	   		OBJECT IDENTIFIER ::= { prvtStatisticsHistoryObjects 2 }
+
+
+
+-- 
+-- ***********************************************************
+-- 
+--                 STATISTICS HISTORY CONFIG
+-- 
+-- *********************************************************** 
+--
+prvtStatHistAdminStatus OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enables or disables statistics history feature globally. 
+The default value is disabled.
+"
+DEFVAL { disable }
+::=  { prvtStatisticsHistoryCfg 1 }
+
+prvtStatHistGetInterval OBJECT-TYPE
+SYNTAX INTEGER {
+interval15min(1),
+interval30min(2),
+interval60min(3)
+}
+UNITS       "minutes"   
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Configures statistics gathering interval.
+If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant.
+The default value is 15 minutes.
+"
+DEFVAL { interval15min }
+::=  { prvtStatisticsHistoryCfg 2 } 
+
+
+
+prvtStatHistWriteInterval OBJECT-TYPE
+SYNTAX INTEGER {
+interval1h(1),
+interval6h(2),
+interval12h(3),
+interval24h(4)
+}
+UNITS       "hours"   
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Configures time when statistics history should be dumped to configured statistics file.
+If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. 
+The default value is 1 hour.
+"
+DEFVAL { interval1h }
+::=  { prvtStatisticsHistoryCfg 3 }
+
+prvtStatHistPath OBJECT-TYPE
+SYNTAX DisplayString (SIZE (0..40))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Configures directory where statistics history files should be stored.
+If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. 
+The default value is '/var/stats'.
+"
+DEFVAL { "/var/stats" }
+::= { prvtStatisticsHistoryCfg 4 }     
+
+
+--
+-- prvtStatisticsHistoryInterfaceCfgTable: statistics history configuration on a per port basis
+--
+
+prvtStatisticsHistoryIntCfgTable   OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatisticsHistoryIntCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The table that controls statistics history configuration on individual
+            ports."
+    ::= { prvtStatisticsHistoryCfg 5 }
+
+prvtStatisticsHistoryIntCfgEntry   OBJECT-TYPE
+    SYNTAX      PrvtStatisticsHistoryIntCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Statistics history configuration information for a particular port."
+     INDEX { ifIndex }
+    ::= { prvtStatisticsHistoryIntCfgTable 1 }
+
+PrvtStatisticsHistoryIntCfgEntry ::= SEQUENCE {
+      prvtStatHistIntAdminStatus        INTEGER
+      } 
+
+prvtStatHistIntAdminStatus   OBJECT-TYPE
+SYNTAX INTEGER
+{
+enable (1),
+disable (2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+" Enables or disables statistics-history feature per interface." 
+::= { prvtStatisticsHistoryIntCfgEntry 1 }      
+
+
+--
+--  *********************************************************** 
+--
+--                   STATISTICS HISTORY DAILY SNAPSHOT DATA
+--
+--  *********************************************************** 
+--
+
+prvtStatHistDailySnapshotAdminStatus OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}   
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Shows if statistics history feature is globally enabled or disabled.
+If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant.
+Copied from configuration database when daily snapshot is created."
+::=  { prvtStatHistDailySnapshotData 1 }
+
+prvtStatHistDailySnapshotGetInterval OBJECT-TYPE
+SYNTAX INTEGER {
+interval15min(1),
+interval30min(2),
+interval60min(3)
+}
+UNITS       "minutes"   
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Statistics gathering interval.
+If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant. 
+Copied from configuration database when daily snapshot is created."
+::=  { prvtStatHistDailySnapshotData 2 } 
+
+
+
+prvtStatHistDailySnapshotWriteInterval OBJECT-TYPE
+SYNTAX INTEGER {
+interval1h(1),
+interval6h(2),
+interval12h(3),
+interval24h(4)
+}
+UNITS       "hours"   
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Time when statistics history should be dumped to configured statistics file.
+If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant.
+Copied from configuration database when daily snapshot is created. 
+"
+DEFVAL { interval1h }
+::=  { prvtStatHistDailySnapshotData 3 }
+
+prvtStatHistDailySnapshotPath OBJECT-TYPE
+SYNTAX DisplayString(SIZE (0..40))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Directory where statistics history files should be stored.
+If prvtStatHistAdminStatus object is disabled, then this object's value is irrelevant.   
+Copied from configuration database when daily snapshot is created.
+Format: [device/]path. 
+"
+::= { prvtStatHistDailySnapshotData 4 }     
+
+
+--
+-- prvtStatisticsHistoryDataTable: statistics history information
+--
+
+prvtStatisticsHistoryDataTable   OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatisticsHistoryDataEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "The table that show statistics history information."
+    ::= { prvtStatHistDailySnapshotData 5 }
+
+prvtStatisticsHistoryDataEntry   OBJECT-TYPE
+    SYNTAX      PrvtStatisticsHistoryDataEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+            "Statistics history information."
+     INDEX {ifIndex, 
+     		prvtStatHistInterval}
+    ::= { prvtStatisticsHistoryDataTable 1 }
+
+PrvtStatisticsHistoryDataEntry ::= SEQUENCE {              
+		    prvtStatHistInterval											Unsigned32,
+     		prvtStatHistLast5secInPkts										Counter32,
+			prvtStatHistLast1minInPkts										Counter32,
+			prvtStatHistLast5minInPkts										Counter32,
+			prvtStatHistLast5secOutPkts										Counter32, 
+			prvtStatHistLast1minOutPkts										Counter32,
+			prvtStatHistLast5minOutPkts										Counter32, 			
+			prvtStatHistLast5secInBps										Counter64,
+			prvtStatHistLast1minInBps										Counter64,       			
+			prvtStatHistLast5minInBps										Counter64,
+			prvtStatHistLast5secOutBps										Counter64,
+			prvtStatHistLast1minOutBps										Counter64,
+			prvtStatHistLast5minOutBps										Counter64,
+			prvtStatHistEtherStatsDropEvents	    						Counter32,			
+    		prvtStatHistEtherStatsPkts										Counter32, 
+			prvtStatHistEtherStatsBroadcastPkts								Counter32,
+			prvtStatHistEtherStatsMulticastPkts								Counter32, 
+			prvtStatHistEtherStatsCRCAlignErrors							Counter32,   			
+			prvtStatHistEtherStatsUndersizePkts								Counter32,
+			prvtStatHistEtherStatsOversizePkts								Counter32,
+			prvtStatHistEtherStatsFragments									Counter32,
+			prvtStatHistEtherStatsJabbers									Counter32, 
+			prvtStatHistEtherStatsCollisions								Counter32,    
+			prvtStatHistEtherStatsDroppedFrames								Counter32, 
+			prvtStatHistEtherStatsHighCapacityOverflowPkts					Counter32, 
+			prvtStatHistEtherStatsHighCapacityOverflowOctets				Counter32,  
+			prvtStatHistEtherStatsHighCapacityPkts							Counter64,
+			prvtStatHistEtherStatsHighCapacityOctets						Counter64,  
+			prvtStatHistEtherStatsHighCapacityPkts64Octets					Counter64, 
+			prvtStatHistEtherStatsHighCapacityPkts65to127Octets				Counter64,
+			prvtStatHistEtherStatsHighCapacityPkts128to255Octets			Counter64,
+			prvtStatHistEtherStatsHighCapacityPkts256to511Octets			Counter64, 
+			prvtStatHistEtherStatsHighCapacityPkts512to1023Octets			Counter64, 
+			prvtStatHistEtherStatsHighCapacityPkts1024to1518Octets			Counter64,   
+			prvtStatHistDot3StatsAlignmentErrors							Counter32, 
+    		prvtStatHistDot3StatsFCSErrors									Counter32, 
+    		prvtStatHistDot3StatsSingleCollisionFrames 						Counter32,
+    		prvtStatHistDot3StatsMultipleCollisionFrames 					Counter32,
+    		prvtStatHistDot3StatsSQETestErrors								Counter32, 
+    		prvtStatHistDot3StatsDeferredTransmissions						Counter32,
+    		prvtStatHistDot3StatsLateCollisions								Counter32, 
+    		prvtStatHistDot3StatsExcessiveCollisions						Counter32,
+    		prvtStatHistDot3StatsInternalMacTransmitErrors					Counter32,
+    		prvtStatHistDot3StatsCarrierSenseErrors							Counter32, 
+    		prvtStatHistDot3StatsFrameTooLongs 								Counter32, 
+    		prvtStatHistDot3StatsInternalMacReceiveErrors					Counter32,
+    		prvtStatHistIfInDiscards										Counter32,  
+			prvtStatHistIfInErrors											Counter32,
+			prvtStatHistIfInUnknownProtos									Counter32, 
+			prvtStatHistIfOutDiscards										Counter32,
+			prvtStatHistIfOutErrors											Counter32,
+    		prvtStatHistIfHCInOctets										Counter64, 
+    		prvtStatHistIfHCInUcastPkts										Counter64,
+    		prvtStatHistIfHCInMulticastPkts									Counter64,
+    		prvtStatHistIfHCInBroadcastPkts									Counter64, 
+    		prvtStatHistIfHCOutOctets										Counter64, 
+    		prvtStatHistIfHCOutUcastPkts 									Counter64,
+    		prvtStatHistIfHCOutMulticastPkts 								Counter64,
+    		prvtStatHistIfHCOutBroadcastPkts								Counter64,
+      		prvtStatHistValidInterval        								TruthValue
+      } 
+ 
+prvtStatHistInterval  OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Number of statistics gathering interval.
+All valid and invalid gathering intervals are supported. Check prvtStatHistValidInterval if true/false."
+::= { prvtStatisticsHistoryDataEntry 1 }
+
+prvtStatHistLast5secInPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last5secInPkts counter."
+::= { prvtStatisticsHistoryDataEntry 2 } 
+
+prvtStatHistLast1minInPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last1minInPkts counter."
+::= { prvtStatisticsHistoryDataEntry 3 } 
+
+prvtStatHistLast5minInPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last5minInPkts counter."
+::= { prvtStatisticsHistoryDataEntry 4 }
+
+
+prvtStatHistLast5secOutPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last5secOutPkts counter."
+::= { prvtStatisticsHistoryDataEntry 5 }
+
+
+prvtStatHistLast1minOutPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last1minOutPkts counter."
+::= { prvtStatisticsHistoryDataEntry 6 }
+  
+
+prvtStatHistLast5minOutPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last5minOutPkts counter."
+::= { prvtStatisticsHistoryDataEntry 7 }
+
+prvtStatHistLast5secInBps  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last5secInBps counter."
+::= { prvtStatisticsHistoryDataEntry 8 }
+
+prvtStatHistLast1minInBps  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last1minInBps counter."
+::= { prvtStatisticsHistoryDataEntry 9 }
+  
+prvtStatHistLast5minInBps  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last5minInBps counter."
+::= { prvtStatisticsHistoryDataEntry 10 }
+  
+prvtStatHistLast5secOutBps  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last5secOutBps counter."
+::= { prvtStatisticsHistoryDataEntry 11 }
+              
+prvtStatHistLast1minOutBps  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last1minOutBps counter."
+::= { prvtStatisticsHistoryDataEntry 12 }              
+   
+prvtStatHistLast5minOutBps  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of last5minOutBps counter."
+::= { prvtStatisticsHistoryDataEntry 13 } 
+       
+       
+prvtStatHistEtherStatsDropEvents  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsDropEvents counter."
+::= { prvtStatisticsHistoryDataEntry 14 }
+  
+  
+prvtStatHistEtherStatsPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsPkts counter."
+::= { prvtStatisticsHistoryDataEntry 15 }   
+
+prvtStatHistEtherStatsBroadcastPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsBroadcastPkts counter."
+::= { prvtStatisticsHistoryDataEntry 16 } 
+
+prvtStatHistEtherStatsMulticastPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsMulticastPkts counter."
+::= { prvtStatisticsHistoryDataEntry 17 }
+
+prvtStatHistEtherStatsCRCAlignErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsCRCAlignErrors counter."
+::= { prvtStatisticsHistoryDataEntry 18 } 
+
+prvtStatHistEtherStatsUndersizePkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsUndersizePkts counter."
+::= { prvtStatisticsHistoryDataEntry 19 } 
+
+prvtStatHistEtherStatsOversizePkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsOversizePkts counter."
+::= { prvtStatisticsHistoryDataEntry 20 } 
+
+prvtStatHistEtherStatsFragments  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsFragments counter."
+::= { prvtStatisticsHistoryDataEntry 21 } 
+
+prvtStatHistEtherStatsJabbers  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsJabbers counter."
+::= { prvtStatisticsHistoryDataEntry 22 } 
+
+prvtStatHistEtherStatsCollisions  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsCollisions counter."
+::= { prvtStatisticsHistoryDataEntry 23 } 
+
+prvtStatHistEtherStatsDroppedFrames  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsDroppedFrames counter."
+::= { prvtStatisticsHistoryDataEntry 24 } 
+
+prvtStatHistEtherStatsHighCapacityOverflowPkts  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityOverflowPkts counter."
+::= { prvtStatisticsHistoryDataEntry 25 } 
+
+prvtStatHistEtherStatsHighCapacityOverflowOctets  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityOverflowOctets counter."
+::= { prvtStatisticsHistoryDataEntry 26 } 
+
+prvtStatHistEtherStatsHighCapacityPkts  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityPkts counter."
+::= { prvtStatisticsHistoryDataEntry 27 } 
+
+prvtStatHistEtherStatsHighCapacityOctets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityOctets counter."
+::= { prvtStatisticsHistoryDataEntry 28 } 
+
+prvtStatHistEtherStatsHighCapacityPkts64Octets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityPkts64Octets counter."
+::= { prvtStatisticsHistoryDataEntry 29 }
+
+prvtStatHistEtherStatsHighCapacityPkts65to127Octets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityPkts65to127Octets counter."
+::= { prvtStatisticsHistoryDataEntry 30 } 
+
+prvtStatHistEtherStatsHighCapacityPkts128to255Octets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityPkts128to255Octets counter."
+::= { prvtStatisticsHistoryDataEntry 31 } 
+
+prvtStatHistEtherStatsHighCapacityPkts256to511Octets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityPkts256to511Octets counter."
+::= { prvtStatisticsHistoryDataEntry 32 } 
+
+prvtStatHistEtherStatsHighCapacityPkts512to1023Octets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityPkts512to1023Octets counter."
+::= { prvtStatisticsHistoryDataEntry 33 }
+
+prvtStatHistEtherStatsHighCapacityPkts1024to1518Octets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of etherStatsHighCapacityPkts1024to1518Octets counter."
+::= { prvtStatisticsHistoryDataEntry 34 }
+   
+prvtStatHistDot3StatsAlignmentErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsAlignmentErrors counter."
+::= { prvtStatisticsHistoryDataEntry 35 } 
+
+prvtStatHistDot3StatsFCSErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsFCSErrors counter."
+::= { prvtStatisticsHistoryDataEntry 36 } 
+
+prvtStatHistDot3StatsSingleCollisionFrames  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsSingleCollisionFrames counter."
+::= { prvtStatisticsHistoryDataEntry 37 } 
+
+prvtStatHistDot3StatsMultipleCollisionFrames  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsMultipleCollisionFrames counter."
+::= { prvtStatisticsHistoryDataEntry 38 } 
+
+prvtStatHistDot3StatsSQETestErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsSQETestErrors counter."
+::= { prvtStatisticsHistoryDataEntry 39 } 
+
+prvtStatHistDot3StatsDeferredTransmissions  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsDeferredTransmissions counter."
+::= { prvtStatisticsHistoryDataEntry 40 }
+
+prvtStatHistDot3StatsLateCollisions  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsLateCollisions counter."
+::= { prvtStatisticsHistoryDataEntry 41 } 
+
+prvtStatHistDot3StatsExcessiveCollisions  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsExcessiveCollisions counter."
+::= { prvtStatisticsHistoryDataEntry 42 } 
+
+prvtStatHistDot3StatsInternalMacTransmitErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsInternalMacTransmitErrors counter."
+::= { prvtStatisticsHistoryDataEntry 43 }
+
+prvtStatHistDot3StatsCarrierSenseErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsCarrierSenseErrors counter."
+::= { prvtStatisticsHistoryDataEntry 44 }
+
+prvtStatHistDot3StatsFrameTooLongs  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsFrameTooLongs counter."
+::= { prvtStatisticsHistoryDataEntry 45 } 
+
+prvtStatHistDot3StatsInternalMacReceiveErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsInternalMacReceiveErrors counter."
+::= { prvtStatisticsHistoryDataEntry 46 } 
+
+prvtStatHistIfInDiscards  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifInDiscards counter."
+::= { prvtStatisticsHistoryDataEntry 47 } 
+
+prvtStatHistIfInErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifInErrors counter."
+::= { prvtStatisticsHistoryDataEntry 48 } 
+
+prvtStatHistIfInUnknownProtos  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifInUnknownProtos counter."
+::= { prvtStatisticsHistoryDataEntry 49 }
+
+
+prvtStatHistIfOutDiscards  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifOutDiscards counter."
+::= { prvtStatisticsHistoryDataEntry 50 } 
+
+prvtStatHistIfOutErrors  OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of dot3StatsDeferredTransmissions counter."
+::= { prvtStatisticsHistoryDataEntry 51 } 
+
+prvtStatHistIfHCInOctets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifHCInOctets counter."
+::= { prvtStatisticsHistoryDataEntry 52 }
+
+prvtStatHistIfHCInUcastPkts  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifHCInUcastPkts counter."
+::= { prvtStatisticsHistoryDataEntry 53 } 
+
+prvtStatHistIfHCInMulticastPkts  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifHCInMulticastPkts counter."
+::= { prvtStatisticsHistoryDataEntry 54 } 
+
+prvtStatHistIfHCInBroadcastPkts  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of prvtStatHistIfHCInBroadastPkts counter."
+::= { prvtStatisticsHistoryDataEntry 55 }
+
+prvtStatHistIfHCOutOctets  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifHCOutOctets counter."
+::= { prvtStatisticsHistoryDataEntry 56 } 
+
+prvtStatHistIfHCOutUcastPkts  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifHCOutUcastPkts counter."
+::= { prvtStatisticsHistoryDataEntry 57 } 
+
+prvtStatHistIfHCOutMulticastPkts  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifHCOutMulticastPkts counter."
+::= { prvtStatisticsHistoryDataEntry 58 } 
+
+prvtStatHistIfHCOutBroadcastPkts  OBJECT-TYPE
+SYNTAX Counter64
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Value of ifHCOutBroadcastPkts counter."
+::= { prvtStatisticsHistoryDataEntry 59 }
+
+prvtStatHistValidInterval OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"A boolean showing if the interval is valid."
+::= { prvtStatisticsHistoryDataEntry 60 }
+
+
+prvtStatisticsHistoryCompliances OBJECT IDENTIFIER ::= { prvtStatisticsHistoryConformance 1 }
+prvtStatisticsHistoryGroups      OBJECT IDENTIFIER ::= { prvtStatisticsHistoryConformance 2 }
+
+-- ******************************************************************
+-- Units of conformance
+-- ******************************************************************
+
+prvtStatisticsHistoryIntCfgGroup OBJECT-GROUP
+    OBJECTS {
+	prvtStatHistIntAdminStatus
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the interface configuration group."
+    ::= { prvtStatisticsHistoryGroups 1 }
+
+prvtStatisticsHistoryDataGroup OBJECT-GROUP
+    OBJECTS {
+		prvtStatHistLast5secInPkts,
+			prvtStatHistLast1minInPkts,
+			prvtStatHistLast5minInPkts,
+			prvtStatHistLast5secOutPkts,
+			prvtStatHistLast1minOutPkts,
+			prvtStatHistLast5minOutPkts,
+			prvtStatHistLast5secInBps,
+			prvtStatHistLast1minInBps,
+			prvtStatHistLast5minInBps,
+			prvtStatHistLast5secOutBps,
+			prvtStatHistLast1minOutBps,
+			prvtStatHistLast5minOutBps,
+			prvtStatHistEtherStatsDropEvents,
+    		prvtStatHistEtherStatsPkts,
+			prvtStatHistEtherStatsBroadcastPkts,
+			prvtStatHistEtherStatsMulticastPkts,
+			prvtStatHistEtherStatsCRCAlignErrors,
+			prvtStatHistEtherStatsUndersizePkts,
+			prvtStatHistEtherStatsOversizePkts,
+			prvtStatHistEtherStatsFragments,
+			prvtStatHistEtherStatsJabbers,
+			prvtStatHistEtherStatsCollisions,
+			prvtStatHistEtherStatsDroppedFrames,
+			prvtStatHistEtherStatsHighCapacityOverflowPkts,
+			prvtStatHistEtherStatsHighCapacityOverflowOctets,
+			prvtStatHistEtherStatsHighCapacityPkts,
+			prvtStatHistEtherStatsHighCapacityOctets,
+			prvtStatHistEtherStatsHighCapacityPkts64Octets,
+			prvtStatHistEtherStatsHighCapacityPkts65to127Octets,
+			prvtStatHistEtherStatsHighCapacityPkts128to255Octets,
+			prvtStatHistEtherStatsHighCapacityPkts256to511Octets,
+			prvtStatHistEtherStatsHighCapacityPkts512to1023Octets,
+			prvtStatHistEtherStatsHighCapacityPkts1024to1518Octets,
+			prvtStatHistDot3StatsAlignmentErrors,
+    		prvtStatHistDot3StatsFCSErrors,
+    		prvtStatHistDot3StatsSingleCollisionFrames,
+    		prvtStatHistDot3StatsMultipleCollisionFrames,
+    		prvtStatHistDot3StatsSQETestErrors,
+    		prvtStatHistDot3StatsDeferredTransmissions,
+    		prvtStatHistDot3StatsLateCollisions,
+    		prvtStatHistDot3StatsExcessiveCollisions,
+    		prvtStatHistDot3StatsInternalMacTransmitErrors,
+    		prvtStatHistDot3StatsCarrierSenseErrors,
+    		prvtStatHistDot3StatsFrameTooLongs,
+    		prvtStatHistDot3StatsInternalMacReceiveErrors,
+    		prvtStatHistIfInDiscards,
+			prvtStatHistIfInErrors,
+			prvtStatHistIfInUnknownProtos,
+			prvtStatHistIfOutDiscards,
+			prvtStatHistIfOutErrors,
+    		prvtStatHistIfHCInOctets,
+    		prvtStatHistIfHCInUcastPkts,
+    		prvtStatHistIfHCInMulticastPkts,
+    		prvtStatHistIfHCInBroadcastPkts,
+    		prvtStatHistIfHCOutOctets,
+    		prvtStatHistIfHCOutUcastPkts,
+    		prvtStatHistIfHCOutMulticastPkts,
+    		prvtStatHistIfHCOutBroadcastPkts,
+      		prvtStatHistValidInterval
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Statistics History Data group."
+    ::= { prvtStatisticsHistoryGroups 2 }
+    
+prvtStatisticsHistoryCfgGroup OBJECT-GROUP
+    OBJECTS {
+	prvtStatHistAdminStatus,
+	prvtStatHistGetInterval,
+	prvtStatHistWriteInterval,
+	prvtStatHistPath
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the global configuration group."
+    ::= { prvtStatisticsHistoryGroups 3 }
+
+prvtStatHistDailySnapshotDataGroup OBJECT-GROUP
+    OBJECTS {
+	prvtStatHistDailySnapshotAdminStatus,
+	prvtStatHistDailySnapshotGetInterval,
+	prvtStatHistDailySnapshotWriteInterval,
+	prvtStatHistDailySnapshotPath
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the global configuration group."
+    ::= { prvtStatisticsHistoryGroups 4 }
+
+prvtStatisticsHistoryCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for support of the statistics history MIB module."
+    MODULE
+        MANDATORY-GROUPS {
+            prvtStatisticsHistoryIntCfgGroup,
+	    prvtStatisticsHistoryDataGroup,
+	    prvtStatisticsHistoryCfgGroup,
+	    prvtStatHistDailySnapshotDataGroup
+            }
+
+    ::= { prvtStatisticsHistoryCompliances 1 }
+
+
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-SWITCH-ACCESS-LIST-MIB b/MIBS/telco-systems/binos/PRVT-SWITCH-ACCESS-LIST-MIB
new file mode 100644
index 0000000..d36047f
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SWITCH-ACCESS-LIST-MIB
@@ -0,0 +1,2529 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-ACCESS-LIST-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+
+PRVT-SWITCH-ACCESS-LIST-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+
+    MODULE-IDENTITY, OBJECT-TYPE,IpAddress                                            
+        FROM SNMPv2-SMI
+    RowStatus, DisplayString, TEXTUAL-CONVENTION, MacAddress, TruthValue
+        FROM SNMPv2-TC
+    ifIndex
+        FROM IF-MIB
+    dot1qVlanIndex, dot1qVlanStatus
+        FROM Q-BRIDGE-MIB
+       NOTIFICATION-TYPE
+          FROM SNMPv2-SMI       
+              
+      MODULE-COMPLIANCE, NOTIFICATION-GROUP,
+OBJECT-GROUP
+FROM SNMPv2-CONF
+
+svcId,
+sapPortId, 
+sapEncapValue,  
+sdpId
+FROM  PRVT-SERV-MIB
+ 
+   ipSwitch   
+	                                     FROM PRVT-SWITCH-MIB;  
+
+
+    prvtSwitchAccessListMib MODULE-IDENTITY
+    LAST-UPDATED "201011160000Z"
+    ORGANIZATION "BATM Advanced Communication"
+    CONTACT-INFO
+         " BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+    DESCRIPTION
+        "The access-list MIB module that controls L3 switches access-list parameters"
+
+    -- revision history   
+    REVISION   "201102070000Z"
+    DESCRIPTION   
+    "Addeed accessListInterfaceRateStatistics object"
+
+    REVISION   "201011160000Z"
+    DESCRIPTION
+    	"Added accessListSapTable and accessListSapStatisticsTable"
+
+    REVISION   "201011030000Z"
+    DESCRIPTION
+    	"Added new OIDs standardAccessListDropLevel,  extendedAccessListDropLevel, macAccessListDropLevel,
+    	 standardAccessListDscp, extendedAccessListDscp"
+	REVISION	"200904170000Z"
+	DESCRIPTION
+		"Created AccessListRemarkString TC."
+
+	REVISION	"200811200000Z"
+	DESCRIPTION
+		"Added objects for Egress Access Lists"
+
+	REVISION	"200802140000Z"
+	DESCRIPTION
+		"Added Access List Interface Statistics"
+         REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions." 
+    REVISION 	 "200712050000Z"
+    	DESCRIPTION
+    	" "
+    REVISION     "200603220000Z"
+     	 DESCRIPTION
+		"Added the tag filter object in the interface and VLAN access group tables and changed some
+		description with TMetro specific information."      
+		
+    REVISION     "200510030000Z"
+     	 DESCRIPTION
+		"Switched the values of greater-than and less-than in PortDef textual convention."                
+		
+    REVISION     "200509300000Z"
+     	 DESCRIPTION
+		"Changed the Rate textual convention to include the value of 0 (zero)."
+
+    REVISION     "200502280000Z"
+     	 DESCRIPTION
+		"Added the span track objects in the interface tables."
+		   
+    REVISION     "200502240000Z"
+     	 DESCRIPTION
+		"Added the source and destination range objects in the extended access list table."
+
+    
+      REVISION     "200502160000Z"
+     	 DESCRIPTION
+		"Fixed spelling errors and changed the contact info."
+		
+     REVISION     "200412150000Z"
+    DESCRIPTION
+       "1. accessListControlTable is now indexed only by accessListControlListGroup and the row
+       status creates whole groups.
+       2. Added standardAccessListIndex and extendedAccessListIndex as indices of standardAccessListTable 
+       and extendedAccessListTable to replace accessGroupControlListIndex.
+       3. Added standardAccessListRowStatus and extendedAccessListRowStatus to enable creation of rules.
+       Rules, however, cannot be deleted using these objects. 
+       4. Added support for enabling the loggin of ACLs (standardAccessListLog, extendedAccessListLog).
+       5. Added support for redirection traffic to a vlan and ip next hop
+           (accessListInterfaceRedirectVlanID,accessListVLANRedirectVlanID,accessListInterfaceRedirectNexthop,accessListVLANRedirectNexthop).
+       6. Added objects for configuring the Peak rate and peak burst when dual rate limit is used.
+       (accessListInterfacePeakRate, accessListInterfacePeakBurst, accessListVLANPeakRate,accessListVLANPeakBurst) 
+       7. Added objects for toggling the traffic metering color awareness and remarking policy. 
+       (accessListInterfaceColorAware, accessListVlanColorAware,accessListInterfacePolicy, accessListVlanPolicy)
+        "
+
+    REVISION     "200310150000Z" 
+          DESCRIPTION
+       "Global changes:
+        1. Added support for VLAN IP access-group.
+        2. Added support for redirecting traffic to an interface
+           (accessListInterfaceRedirectIfIndex,accessListVLANRedirectIfIndex).
+        3. Renamed accessListControlListGroupIndex to accessListInterfaceGroupIndex
+        4. Changes in AccessListAction, removed shaper.
+        5. Removed Burst TEXTUAL-CONVENTION.
+        
+        Changes for E-Series
+        1. Introduced changes in PortDef,ExceedAction,AccessListDiscard TEXTUAL-CONVENTION for E-Series.
+        2. The objects extendedAccessListIgmpType and accessListInterfaceShaper are
+           not supported for E-Series.
+        3. Added accessListInterfaceBurst,accessListVLANBurst for E-Series.
+        4. The range of accessListInterfaceDscp is now 0..63 for E-Series."
+
+    REVISION     "200305080000Z"
+    DESCRIPTION
+       "Moved to SMI-V2.
+        Removed extendedAccessListEstablished and
+        extendedAccessListMSS."
+
+    REVISION     "200211120000Z"
+    DESCRIPTION
+        "Changed mapping of AccessListAction enum."
+
+    REVISION     "200111050000Z"
+    DESCRIPTION
+        "Added shaper to access group."
+
+    REVISION     "200109300000Z"
+    DESCRIPTION
+        "Added ICMP type,ICMP code and IGMP to extended access list."
+
+    REVISION     "200108270000Z"
+    DESCRIPTION
+        "Added access group with rate limit."
+
+    REVISION     "200107310000Z"
+    DESCRIPTION
+        "Added routed ISP."
+
+    REVISION     "200105140000Z"
+    DESCRIPTION
+        "1. Added remark, MSS and Established to access list.
+         2. Added Priority and Discard to access group."
+
+    REVISION     "200102200000Z"
+    DESCRIPTION
+        "Added the ability to modify TOS in extended access list."
+
+    REVISION     "200102150000Z"
+    DESCRIPTION
+        "Added shaper mode for access list action."
+
+    REVISION     "200101280000Z"
+    DESCRIPTION
+        "Added support for access group in ISP."
+
+    REVISION     "200011130959Z"
+    DESCRIPTION
+        "Initial version."
+
+    ::= { ipSwitch 1 }
+        
+    AccessListAction ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The AccessListAction type represents action taken when this 
+         access-list condition are asserted.
+         "
+      SYNTAX INTEGER
+      {
+        permit(0),
+        deny(1),
+        shaper(2),
+        remark(3),
+        undefined(100)
+      }
+
+     IpProtocol ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The IpProtocol type represents the protocol number in the IP datagram header"
+      SYNTAX INTEGER (0..255)
+
+     PortDef ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The PortDef type operates together with the port number filed inside
+         the access-list & control how the port number is being processed.
+         The values greater-than(3) and less-than(4) are supported only on
+         E-Series family boards"
+      SYNTAX INTEGER
+      {
+        equal(1),
+        range(2),
+        greater-than(3),
+        less-than(4),
+        undefined(0)
+      }
+
+    Rate ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The Rate type represents in Kbps the maximum rate limit for the flow"
+      SYNTAX INTEGER (0|13..1000000)
+
+    ExceedAction ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "the ExceedAction type represents the action that the switch should take
+         when one of the limits exceeded: drop -> drop the packets, markDiscardable
+         this packet is discardable if a conjection ocure
+         Only the E-Series family boards support the values green, yellow and red. Other
+         values are not supported by the E-Series"
+      SYNTAX INTEGER
+      {
+        drop(0),
+        markDiscardable(1),
+        undefined(2),
+        green(3),
+        yellow(4),
+        red(5)
+      }
+
+    VlanTag ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The VlanTag type represents if the VLAN is tagged or untagged."
+      SYNTAX INTEGER
+      {
+        untagged (0),
+        tagged   (1),
+        undefined (2)
+      }
+
+    ISPType ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The ISPType type represents the ISP type - either connective or normal."
+      SYNTAX INTEGER
+      {
+        connectivity (0),
+        normal	     (1),
+        routed       (2)   
+        
+      }
+
+    Shaper ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The Shaper type represents the status of the shaper"
+      SYNTAX INTEGER
+      {
+        disable (0),
+        enable (1)
+      }
+
+    ConformAction ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The action to perform if the condition is matched."
+      SYNTAX INTEGER
+      {
+        transmit (0)
+      }
+      
+    AssigenValue ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "Enables/disables assignment of an ISP user to this interface."
+      SYNTAX INTEGER
+      {
+        enable  (1),
+        disable (2)
+      }
+
+    AccessListModifyTos ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "The AccessListModifyTos must be enabled if the user wants the ToS to be modified."
+      SYNTAX INTEGER
+      {
+        enable  (1),
+        disable (0)
+      }    
+
+    AccessListEstablished ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "Match established connection (ACK or RST flages)"
+      SYNTAX INTEGER
+      {
+        enable  (1),
+        disable (0)
+      }        
+      
+    AccessListDiscard ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "Mark discardable or normal for priority on access group
+         Only the E-Series family and the G-Series family boards support the values green, yellow and red. Other
+         values are not supported by the E-Series and G-series."
+      SYNTAX INTEGER
+      {
+        normal(0),
+        discardable(1),
+        green(2),
+        yellow(3),
+        red(4),
+        undefined(5)
+      }
+
+    AccessListRemarkString ::= TEXTUAL-CONVENTION
+      DISPLAY-HINT "40a"
+      STATUS       current
+      DESCRIPTION
+        "Access list entry comment string"
+      SYNTAX       OCTET STRING (SIZE (0..40))
+
+   TxqDropLevel ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "TXQ drop level values"
+    SYNTAX  INTEGER { undefined(0), green(1), yellow(2) }
+ 
+MatchTraffic ::= TEXTUAL-CONVENTION
+    STATUS       current
+    DESCRIPTION
+        "Match traffic values"
+    SYNTAX  INTEGER { 
+	undefined(0), 
+	untagged(1),
+	unknown-unicast(2),
+	multicast(3),
+	broadcast(4),
+	known-unicast(5) }
+
+    AccessListStatistics ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "Access list statistics values"
+      SYNTAX INTEGER
+      {
+        enable  (1),
+        disable (0)
+      }        
+
+    AccessListDirection ::= TEXTUAL-CONVENTION
+      STATUS current
+      DESCRIPTION
+        "Access list applied direction values"
+      SYNTAX INTEGER
+      {
+        ingress  (0),
+        egress (1)
+      }        
+
+    prvtSwitchAccessListNotifications  	OBJECT IDENTIFIER ::= { prvtSwitchAccessListMib 0 }  
+    accessLists 						OBJECT IDENTIFIER ::= { prvtSwitchAccessListMib 1 }
+    isp         						OBJECT IDENTIFIER ::= { prvtSwitchAccessListMib 2 }  
+    prvtSwitchAccessListConformance  	OBJECT IDENTIFIER ::= { prvtSwitchAccessListMib 3 }
+
+
+    accessListTemplate OBJECT-TYPE
+    SYNTAX INTEGER {
+        standard  (1),
+        vlan-priority (2)
+    }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "The access-list template in use. For non E-series devices, the device must be restarted 
+        for this setting to take effect."
+    ::= { accessLists 1 }
+
+    accessGroupsDefinitions OBJECT IDENTIFIER ::= { accessLists 2 }
+    accessListsInterfaces   OBJECT IDENTIFIER ::= { accessLists 3 }
+    accessListsVLAN         OBJECT IDENTIFIER ::= { accessLists 4 }     
+    accessListsServices     OBJECT IDENTIFIER ::= { accessLists 5 }
+    accessListsInterfaceStatistics OBJECT IDENTIFIER ::= { accessLists 6 }  
+    accessListsServicesStatistics OBJECT IDENTIFIER ::= {accessLists 7}
+
+    accessListControlTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AccessListControlEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the creation or removal of a access-list
+         group from all access-list tables. The real programming of values is
+         done in the coresponding access-list table."
+	::= { accessGroupsDefinitions 1 }
+
+    accessListControlEntry OBJECT-TYPE
+	SYNTAX	AccessListControlEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    "An entry in the accessListControlTable table."
+    INDEX { accessListControlListGroup }
+	::= { accessListControlTable 1 }
+
+    AccessListControlEntry ::= SEQUENCE {
+        accessListControlListGroup INTEGER,
+        accessListControlRowStatus RowStatus
+    }
+
+    accessListControlListGroup OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+	MAX-ACCESS accessible-for-notify
+	STATUS current
+	DESCRIPTION
+        "This object identifies the index of the group of access-list rules         
+        Each range of group indexes is related to a different access-list type
+         1..99    for standard access-list
+         100..199 for extended access-list."
+	::= { accessListControlEntry 1 }
+    accessListControlRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This indicates the row status & enables creation & deletion of lines in
+	     this table. See SNMPv2-TC for more information."
+    ::= { accessListControlEntry 2 }
+
+ ----------------------------------------------
+
+    standardAccessListTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF StandardAccessListEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table contains standard access-list parameters."
+	::= { accessGroupsDefinitions 2 }
+
+    standardAccessListEntry OBJECT-TYPE
+	SYNTAX StandardAccessListEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "An entry in the standardAccessListTable table."
+    INDEX { accessListControlListGroup, standardAccessListIndex }
+	::= { standardAccessListTable 1 }
+
+    StandardAccessListEntry ::= SEQUENCE { 
+        standardAccessListIndex		INTEGER,
+	standardAccessListAction    AccessListAction,
+        standardAccessListIpSrc     IpAddress,
+        standardAccessListIpMASKsrc IpAddress,
+        standardAccessListRemark    AccessListRemarkString,
+        standardAccessListLog       INTEGER,
+        standardAccessListVpt		INTEGER,
+        standardAccessListRowStatus RowStatus,
+	standardAccessListVlanId	INTEGER,
+	standardAccessListVlanMask	DisplayString,
+        standardAccessListProviderVlanId INTEGER,
+        standardAccessListProviderVlanMask DisplayString,
+	standardAccessListProviderVpt	INTEGER,
+	standardAccessListUntaggedMode	TruthValue,
+	standardAccessListDropLevel     INTEGER,
+	standardAccessListDscp  		INTEGER
+	
+    }
+
+    standardAccessListIndex OBJECT-TYPE
+	SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	    "Index of the particular rule of the group."
+    ::= { standardAccessListEntry 1 }
+
+    standardAccessListAction OBJECT-TYPE
+	SYNTAX AccessListAction
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "The action to preform if the condition of this access-list rule condition is true."
+    ::= { standardAccessListEntry 2 }
+
+    standardAccessListIpSrc OBJECT-TYPE
+	SYNTAX	IpAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP source address associated with this flow."
+        ::= { standardAccessListEntry 3 }
+
+    standardAccessListIpMASKsrc OBJECT-TYPE
+	SYNTAX	IpAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP mask that, together with standardAccessListIpSrc, defines the subnet."
+        ::= { standardAccessListEntry 4 }
+        
+    standardAccessListRemark OBJECT-TYPE 
+	SYNTAX	AccessListRemarkString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Access list entry comment"
+        ::= { standardAccessListEntry 5 }  
+        
+   	standardAccessListLog OBJECT-TYPE 
+   	SYNTAX	INTEGER 
+   	{
+        undefined (0),
+        log  (1),
+        log-input (2)
+    }
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Enable normal or extended logging of this access-list rule."
+        ::= { standardAccessListEntry 6 }  
+        
+    standardAccessListVpt OBJECT-TYPE 
+   	SYNTAX	INTEGER  
+	{
+	 vpt-value0(0),
+	 vpt-value1(1),
+	 vpt-value2(2),
+	 vpt-value3(3),
+	 vpt-value4(4),
+	 vpt-value5(5),
+	 vpt-value6(6),   
+	 vpt-value7(7),
+	 undefined(8),	
+	 fc-be(241),
+	 fc-l2(242),
+	 fc-af(243),
+	 fc-l1(244),
+	 fc-h2(245),
+	 fc-ef(246),
+	 fc-h1(247),
+	 fc-nc(248) 
+	}
+   	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object is meaningful :
+	    1.when vlan-priority template is used and will reprezent vlan priority tag. 
+	    2.Forwarding class reprezented in the second part of enumeration: fc-##.
+	    A value of 8 means that neither of above is defined."
+        ::= { standardAccessListEntry 7 }  
+
+   standardAccessListRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "This indicates the row status & enables creation of rows in
+	     this table. In order to be consistent with ACL policy, this object 
+	     does not allow deletion of rules. The entire group must be deleted and all 
+	     rules removed at once."
+    ::= { standardAccessListEntry 8 }
+
+  	standardAccessListVlanId OBJECT-TYPE
+		SYNTAX INTEGER (0..4092)
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the customer VLAN. The object is meaningful only 
+		 if standardAccessListVlanMask is set."
+	::= { standardAccessListEntry 9 }
+
+	standardAccessListVlanMask OBJECT-TYPE
+		SYNTAX DisplayString
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the customer VLAN mask. It is meaningful only 
+		 if standardAccessListVlanId is set.
+		 The value is in hexadecimal type DisplayString (0xXXX)."
+	::= { standardAccessListEntry 10 }
+
+	standardAccessListProviderVlanId OBJECT-TYPE
+		SYNTAX INTEGER (0..4092)
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the provider VLAN. The object is meaningful only 
+		 if standardAccessListProviderVlanMask is set."
+	::= { standardAccessListEntry 11 }
+
+	standardAccessListProviderVlanMask OBJECT-TYPE
+		SYNTAX DisplayString
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the provider VLAN mask. It is meaningful only
+		 if standardAccessListProviderVlanId is set.
+		 The value is in hexadecimal type DisplayString (0xXXX)"
+	::= { standardAccessListEntry 12}
+
+	standardAccessListProviderVpt OBJECT-TYPE
+		SYNTAX INTEGER (0..8)
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the provider VLAN priority tag.
+		 A value of 8 means undefined."
+	::= { standardAccessListEntry 13 }
+
+	standardAccessListUntaggedMode OBJECT-TYPE
+		SYNTAX TruthValue
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object enables the untagged mode"
+	::= { standardAccessListEntry 14 }    
+	
+	standardAccessListDropLevel OBJECT-TYPE
+	SYNTAX  INTEGER
+	{  
+	green(0),
+	yellow(1)	
+    }  
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION 
+    "This object define drop-level."
+    ::= { standardAccessListEntry 15}      
+    
+    standardAccessListDscp OBJECT-TYPE
+    SYNTAX INTEGER (0..63)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION
+    "The object shows the DiffServ Point (DSCP) value from IP header."
+    ::= {standardAccessListEntry 16}
+    
+
+    extendedAccessListTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF ExtendedAccessListEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table contains extended access-list parameters."
+	::= { accessGroupsDefinitions 3 }
+
+    extendedAccessListEntry 	OBJECT-TYPE
+	SYNTAX	ExtendedAccessListEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+        "An entry in the extendedAccessListTable table."
+    INDEX { accessListControlListGroup, extendedAccessListIndex	}
+	::= { extendedAccessListTable 1 }
+
+    ExtendedAccessListEntry ::= SEQUENCE {
+    		extendedAccessListIndex		INTEGER,
+            extendedAccessListAction     AccessListAction,
+            extendedAccessListIpProtocol IpProtocol,
+            extendedAccessListIpSrc      IpAddress,
+            extendedAccessListIpMASKsrc  IpAddress,
+            extendedAccessListPortDefSrc PortDef,
+            extendedAccessListPortNumSrc INTEGER,
+            extendedAccessListPortRangeSrc INTEGER,
+            extendedAccessListIpDest     IpAddress,
+            extendedAccessListIpMASKdst  IpAddress,
+            extendedAccessListPortDefDst PortDef,
+            extendedAccessListPortNumDst INTEGER, 
+            extendedAccessListPortRangeDst INTEGER,
+            extendedAccessListTos 	  INTEGER,
+            extendedAccessListPrec       INTEGER,
+            extendedAccessListModifyTos  AccessListModifyTos,
+            extendedAccessListRemark     AccessListRemarkString,
+            extendedAccessListIcmpType   INTEGER,
+	    	extendedAccessListIcmpCode   INTEGER,
+	    	extendedAccessListIgmpType   INTEGER,   
+	    	extendedAccessListEstablished   AccessListEstablished,
+	    	extendedAccessListLog       INTEGER,
+        	extendedAccessListVpt		INTEGER,
+        	extendedAccessListRowStatus RowStatus,
+		extendedAccessListVlanId INTEGER,
+        	extendedAccessListVlanMask DisplayString,
+        	extendedAccessListProviderVlanId INTEGER,
+        	extendedAccessListProviderVlanMask DisplayString,
+		extendedAccessListProviderVpt	INTEGER,
+		extendedAccessListUntaggedMode TruthValue,
+		extendedAccessListDropLevel INTEGER,
+		extendedAccessListDscp INTEGER
+    }
+
+    extendedAccessListIndex OBJECT-TYPE
+	SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	    "Index of the particular rule of the group."
+    ::= { extendedAccessListEntry 1 }
+
+    extendedAccessListAction OBJECT-TYPE
+	SYNTAX	AccessListAction
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The action to preform if this access-list rule condition is true."
+        ::= { extendedAccessListEntry 2 }
+
+	extendedAccessListIpProtocol OBJECT-TYPE
+	SYNTAX	IpProtocol
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP protocol number (see IpProtocol)."
+        ::= { extendedAccessListEntry 3 }
+
+    extendedAccessListIpSrc OBJECT-TYPE
+	SYNTAX	IpAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP source address associated with this flow."
+        ::= { extendedAccessListEntry 4 }
+
+    extendedAccessListIpMASKsrc OBJECT-TYPE
+	SYNTAX	IpAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP mask, together with extendendAccessListIpSrc, defines the subnet."
+        ::= { extendedAccessListEntry 5 }
+
+    extendedAccessListPortDefSrc OBJECT-TYPE
+	SYNTAX	PortDef
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The extendedAccessListPortDefSrc object operates together with the port number filed inside 
+	    the access-list & controls how the port number is being processed.
+	    The values less-than(3) and greater-than(4) are supported only on E-Series family boards."
+        ::= { extendedAccessListEntry 6 }
+
+    extendedAccessListPortNumSrc OBJECT-TYPE
+	SYNTAX	INTEGER (0..65535)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "UDP/TCP port number. A value of 0 represents undefined port number."
+        ::= { extendedAccessListEntry 7 } 
+        
+    extendedAccessListPortRangeSrc OBJECT-TYPE
+	SYNTAX	INTEGER (0..65535)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "UDP/TCP ned range port number. A value of 0 represents undefined port number. Valid
+	    only with extendedAccessListPortDefSrc value of range(2)."
+        ::= { extendedAccessListEntry 8 }    
+
+    extendedAccessListIpDest OBJECT-TYPE
+	SYNTAX	IpAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP destination address associated with this flow."
+        ::= { extendedAccessListEntry 9 }
+
+    extendedAccessListIpMASKdst OBJECT-TYPE
+	SYNTAX	IpAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP mask, together with extendedAccessListIpMASKdst, defines the subnet."
+        ::= { extendedAccessListEntry 10 }
+
+    extendedAccessListPortDefDst OBJECT-TYPE
+	SYNTAX	PortDef
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The extendedAccessListPortDefDst object operates together with the port number filed inside 
+	    the access-list & controls how the port number is being processed.
+	    The values less-than(3) and greater-than(4) are supported only on E-Series family boards."
+        ::= { extendedAccessListEntry 11 }
+
+    extendedAccessListPortNumDst OBJECT-TYPE
+	SYNTAX	INTEGER (0..65535)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "UDP/TCP port number. A value of 0 represents undefined port number."
+        ::= { extendedAccessListEntry 12 }  
+        
+     extendedAccessListPortRangeDst OBJECT-TYPE
+	SYNTAX	INTEGER (0..65535)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "UDP/TCP ned range port number. A value of 0 represents undefined port number. Valid for
+	    value range (2) of extendedAccessListPortDefDst."
+        ::= { extendedAccessListEntry 13 }  
+
+
+    extendedAccessListTos OBJECT-TYPE
+	SYNTAX	INTEGER (0..15)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the type of service value."
+        ::= { extendedAccessListEntry 14 }
+
+    extendedAccessListPrec OBJECT-TYPE
+	SYNTAX	INTEGER (0..7)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Precedence value."
+        ::= { extendedAccessListEntry 15 }
+        
+    extendedAccessListModifyTos OBJECT-TYPE
+	SYNTAX	AccessListModifyTos
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "extendedAccessListModifyTos must be enabled if the user wants the ToS to be modified."
+        ::= { extendedAccessListEntry 16 }    
+        
+    extendedAccessListRemark OBJECT-TYPE 
+	SYNTAX	AccessListRemarkString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Access list entry comment."
+        ::= { extendedAccessListEntry 17 }        
+        
+    extendedAccessListIcmpType OBJECT-TYPE 
+	SYNTAX	INTEGER (0..255)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "ICMP message type."
+        ::= { extendedAccessListEntry 18 }        
+        
+    extendedAccessListIcmpCode OBJECT-TYPE 
+	SYNTAX	INTEGER (0..255)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "ICMP message code."
+        ::= { extendedAccessListEntry 19 }            
+    
+    extendedAccessListIgmpType OBJECT-TYPE
+	SYNTAX	INTEGER (0..15)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "IGMP message type. This object is not supported in E-Series"
+        ::= { extendedAccessListEntry 20 }   
+        
+     extendedAccessListEstablished OBJECT-TYPE 
+	SYNTAX	AccessListEstablished	
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "When TCP protocol type is chosen, setting this object indicates that established connections will be matched."
+        ::= { extendedAccessListEntry 21 }        
+    
+    extendedAccessListLog OBJECT-TYPE 
+   	SYNTAX	INTEGER 
+   	{
+        undefined (0),
+        log  (1),
+        log-input (2)
+    }
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	     "Enable normal or extended logging of this access-list rule."
+        ::= { extendedAccessListEntry 22 }  
+        
+    extendedAccessListVpt OBJECT-TYPE 
+   	SYNTAX	INTEGER 
+   	{
+	 vpt-value0(0),
+	 vpt-value1(1),
+	 vpt-value2(2),
+	 vpt-value3(3),
+	 vpt-value4(4),
+	 vpt-value5(5),
+	 vpt-value6(6),    
+	 vpt-value7(7),
+	 undefined(8),	
+	 fc-be(241),
+	 fc-l2(242),
+	 fc-af(243),
+	 fc-l1(244),
+	 fc-h2(245),
+	 fc-ef(246),
+	 fc-h1(247),
+	 fc-nc(248) 
+	}
+   	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object is meaningful :
+	    1.when vlan-priority template is used and will reprezent vlan priority tag. 
+	    2.Forwarding class reprezented in the second part of enumeration: fc-##.
+	    A value of 8 means that neither of above is defined."
+
+        ::= { extendedAccessListEntry 23 }  
+
+   extendedAccessListRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	     "This indicates the row status & enables creation of lines in
+	     this table. In order to be consistent with ACL policy, this object 
+	     does not allow deletion of rules. The entire group must be deleted and all 
+	     rules removed at once."
+    ::= { extendedAccessListEntry 24 }
+	extendedAccessListVlanId OBJECT-TYPE
+		SYNTAX INTEGER (0..4092)
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the customer VLAN. The object is meaningful
+		 only if extendedAccessListVlanMask is set."
+	::= { extendedAccessListEntry 25 }
+
+	extendedAccessListVlanMask OBJECT-TYPE
+		SYNTAX DisplayString
+		MAX-ACCESS read-create		
+		STATUS current                                                                        
+		DESCRIPTION
+		"This object shows the customer VLAN mask. It is meaningful only
+		 if extendedAccessListVlanId is set.
+		 The value is in hexadecimal type string(0x..)."
+	::= { extendedAccessListEntry 26 }
+
+	extendedAccessListProviderVlanId OBJECT-TYPE
+		SYNTAX INTEGER (0..4092)
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the provider VLAN. The object is meaningful only
+		 if extendedAccessListProviderVlanMask is set."
+	::= { extendedAccessListEntry 27 }
+
+	extendedAccessListProviderVlanMask OBJECT-TYPE
+		SYNTAX DisplayString
+		MAX-ACCESS read-create		
+		STATUS current                                                                        
+		DESCRIPTION
+		"This object shows the provider VLAN mask. It is meaningful only
+		 if extendedAccessListProviderVlanId is set.
+		 The value is in hexadecimal type string(0x..)."
+	::= { extendedAccessListEntry 28 }
+
+	extendedAccessListProviderVpt OBJECT-TYPE
+		SYNTAX INTEGER (0..8)
+		MAX-ACCESS read-create		
+		STATUS current                                                                        
+		DESCRIPTION
+		"This object shows the provider VLAN priority tag. 
+		 A value of 8 means undefined.
+		 This object is meaningful only if vlan-priority template is used."
+	::= { extendedAccessListEntry 29 }
+
+	extendedAccessListUntaggedMode OBJECT-TYPE
+		SYNTAX TruthValue
+		MAX-ACCESS read-create		
+		STATUS current                                                                        
+		DESCRIPTION
+		"This object enables the untagged mode."
+	::= { extendedAccessListEntry 30 }        
+	
+	extendedAccessListDropLevel OBJECT-TYPE
+	SYNTAX  INTEGER
+	{  
+	green(0),
+	yellow(1)
+	}  
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION 
+	"This object define drop-level."
+    ::= { extendedAccessListEntry 31}  
+    
+    extendedAccessListDscp OBJECT-TYPE      
+    SYNTAX INTEGER (0..63)
+    MAX-ACCESS read-create
+    STATUS current
+    DESCRIPTION 
+    "The object shows the DiffServ Point (DSCP) value from IP header."
+    ::= {extendedAccessListEntry 32}
+
+--MAC ACL----------------------------------------------------------------
+   macAccessListTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MACAccessListEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table contains MAC access-list parameters."
+	::= { accessGroupsDefinitions 4 }
+
+    macAccessListEntry 	OBJECT-TYPE
+	SYNTAX	MACAccessListEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+        "An entry in the macAccessListTable table."
+    INDEX { accessListControlListGroup, macAccessListIndex }
+	::= { macAccessListTable 1 }
+
+    MACAccessListEntry ::= SEQUENCE {
+		macAccessListIndex		INTEGER,
+		macAccessListAction     	AccessListAction,
+		macAccessListMacSrc		MacAddress,
+		macAccessListMacSrcMask		MacAddress,
+		macAccessListMacDst		MacAddress,
+		macAccessListMacDstMask		MacAddress,
+		macAccessListRemark		AccessListRemarkString,
+		macAccessListLog		INTEGER,
+		macAccessListRowStatus		RowStatus,
+		macAccessListTos		INTEGER,
+		macAccessListPrecedence		INTEGER,
+		macAccessListVpt		INTEGER,
+		macAccessListVlanId		INTEGER,
+		macAccessListVlanMask 		DisplayString,
+		macAccessListInnerVlanId 	INTEGER,
+		macAccessListInnerVlanMask 	DisplayString,
+		macAccessListInnerVpt 	INTEGER,
+		macAccessListEtherType 		DisplayString,
+		macAccessListDscp 		INTEGER,
+		macAccessListMatchTraffic	MatchTraffic,
+		macAccessListMatchTrafficPort	DisplayString,
+		macAccessListUntaggedMode	TruthValue,
+		macAccessListDropLevel  INTEGER
+
+	}
+
+    macAccessListIndex OBJECT-TYPE
+	SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	    "Index of the particular rule of the group."
+    ::= { macAccessListEntry 1 }
+
+    macAccessListAction OBJECT-TYPE
+	SYNTAX	AccessListAction
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The action to preform if this access-list rule condition is true."
+        ::= { macAccessListEntry 2 }
+   
+	macAccessListMacSrc OBJECT-TYPE
+	SYNTAX	MacAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The object contains the MAC address of source.
+	     If this object is not set, the result is 'any' source mac address.
+	     If object macAccessListMacSrcMask is not set, this object means the host address."
+        ::= { macAccessListEntry 3 }
+       
+	macAccessListMacSrcMask		OBJECT-TYPE
+	SYNTAX	MacAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object contains the mask for MAC source address.
+	     The object affects macAccessListMacSrc, defines host or range."
+		::= { macAccessListEntry 4 } 
+	
+	macAccessListMacDst OBJECT-TYPE
+	SYNTAX	MacAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The object contains the MAC address of destination.
+	     If this object is not set, the result is 'any' destination mac address.
+	     If object macAccessListMacDstMask is not set, this object means the host address."
+        ::= { macAccessListEntry 5 }
+        
+	macAccessListMacDstMask OBJECT-TYPE
+	SYNTAX	MacAddress
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object contains the mask for MAC destination address.
+	     The object affects macAccessListMacDst, defines host or range."
+    	::= { macAccessListEntry 6 }
+
+	macAccessListRemark OBJECT-TYPE 
+	SYNTAX	AccessListRemarkString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Access list entry comment"
+        ::= { macAccessListEntry 7 }  
+        
+   	macAccessListLog OBJECT-TYPE 
+   	SYNTAX	INTEGER 
+   	{
+        undefined (0),
+        log  (1),
+        log-input (2)
+	}
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Enable normal or extended logging of this access-list rule."
+        ::= { macAccessListEntry 8 }  
+       
+	macAccessListRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "This indicates the row status & enables creation of rows in
+	     this table. In order to be consistent with ACL policy, this object 
+	     does not allow deletion of rules. The entire group must be deleted and all 
+	     rules removed at once."
+    ::= { macAccessListEntry 9 }
+	
+	macAccessListTos OBJECT-TYPE
+	SYNTAX	INTEGER
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the type of service value."
+        ::= { macAccessListEntry 10}
+	
+	macAccessListPrecedence OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the precedence value.
+	     The parameter is matched for IP traffic only.
+	     The value is in the range between <0-8>.
+	     When precendence is disable the object will take 8 value."
+        ::= { macAccessListEntry 11 }
+
+	macAccessListVpt OBJECT-TYPE
+	SYNTAX INTEGER 
+	{
+	 vpt-value0(0),
+	 vpt-value1(1),
+	 vpt-value2(2),
+	 vpt-value3(3),
+	 vpt-value4(4),
+	 vpt-value5(5),
+	 vpt-value6(6),      
+	 vpt-value7(7),
+	 undefined(8),	
+	 fc-be(241),
+	 fc-l2(242),
+	 fc-af(243),
+	 fc-l1(244),
+	 fc-h2(245),
+	 fc-ef(246),
+	 fc-h1(247),
+	 fc-nc(248) 
+	}
+
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	   "This object is meaningful :
+	    1.when vlan-priority template is used and will reprezent vlan priority tag. 
+	    2.Forwarding class reprezented in the second part of enumeration: fc-##.
+	    A value of 8 means that neither of above is defined."
+        ::= { macAccessListEntry 12 }
+
+	macAccessListVlanId OBJECT-TYPE
+	SYNTAX INTEGER (0..4092)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the customer VLAN. The object is meaningful only
+	     if macAccessListVlanMask is set."
+        ::= { macAccessListEntry 13 }
+
+	macAccessListVlanMask OBJECT-TYPE
+	SYNTAX	DisplayString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the customer VLAN mask. It is meaningful only 
+	     if macAccessListVlanId is set.
+	     The value is in hexadecimal type string(0x..)."
+        ::= { macAccessListEntry 14 }
+        
+	macAccessListInnerVlanId OBJECT-TYPE
+	SYNTAX INTEGER (0..4092)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the provider VLAN. The object is meaningful only
+	     if macAccessListProviderVlanMask is set."
+        ::= { macAccessListEntry 15 } 
+
+	macAccessListInnerVlanMask OBJECT-TYPE
+	SYNTAX	DisplayString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the provider VLAN mask. It is meaningful only
+	     if macAccessListProviderVlanId is set.
+	     The value is in hexadecimal type string(0x..). "
+        ::= { macAccessListEntry 16 } 
+	
+	macAccessListInnerVpt OBJECT-TYPE
+	SYNTAX INTEGER (0..8)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the provider VLAN priority tag.
+	     A value of 8 means undefined"
+        ::= { macAccessListEntry 17 }
+
+	macAccessListEtherType OBJECT-TYPE
+	SYNTAX DisplayString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The object shows the EtherType field in the Ethernet header.
+	     The field is matched only for non-IP and non-ARP traffic only."
+        ::= { macAccessListEntry 18 }
+
+	macAccessListDscp OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The object shows the DiffServ Point (DSCP) value from IP header."
+        ::= { macAccessListEntry 19 }
+
+	macAccessListMatchTraffic OBJECT-TYPE
+	SYNTAX	MatchTraffic
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object shows the type of traffic to match."
+        ::= { macAccessListEntry 20 }
+
+	macAccessListMatchTrafficPort OBJECT-TYPE
+	SYNTAX	DisplayString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object is meaningful only if macAccessListMatchTraffic
+	     is set to 'known-unicast' value - else returns error.
+		 The values are of types PORTLIST (for example 1/1/1-1/1/4,1/1/6)"
+        ::= { macAccessListEntry 21 }
+
+	macAccessListUntaggedMode OBJECT-TYPE
+	SYNTAX	TruthValue
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "This object enables the untagged mode."
+        ::= { macAccessListEntry 22 }
+        
+    macAccessListDropLevel OBJECT-TYPE
+	SYNTAX  INTEGER
+	{  
+	green(0),
+	yellow(1)
+	}  
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION 
+	"This object define drop-level."
+	::= { macAccessListEntry 23}
+
+
+--Ethertype ACL---------------------------------
+    etherTypeAccessListTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF EtherTypeAccessListEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table contains extended MAC access-list parameters."
+	::= { accessGroupsDefinitions 5 }
+
+    etherTypeAccessListEntry 	OBJECT-TYPE
+	SYNTAX	EtherTypeAccessListEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+        "An entry in the etherTypeAccessListTable table."
+    INDEX { accessListControlListGroup, etherTypeAccessListIndex }
+	::= { etherTypeAccessListTable 1 }
+
+    EtherTypeAccessListEntry ::= SEQUENCE {
+	etherTypeAccessListIndex		INTEGER,
+	etherTypeAccessListAction		AccessListAction,
+	etherTypeAccessListEtherType		DisplayString,
+	etherTypeAccessListEtherTypeCodeMask 	DisplayString,
+   	etherTypeAccessListRemark		AccessListRemarkString,
+        etherTypeAccessListLog			INTEGER,
+        etherTypeAccessListRowStatus		RowStatus,
+        etherTypeAccessListVlanId		INTEGER,
+       	etherTypeAccessListVlanMask		DisplayString,
+       	etherTypeAccessListProviderVlanId 	INTEGER,
+       	etherTypeAccessListProviderVlanMask 	DisplayString,
+       	etherTypeAccessListProviderVpt 		INTEGER
+     }
+
+    etherTypeAccessListIndex OBJECT-TYPE
+	SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	    "Index of the particular rule of the group."
+    ::= { etherTypeAccessListEntry 1 }
+
+    etherTypeAccessListAction OBJECT-TYPE
+	SYNTAX	AccessListAction
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The action to preform if this access-list rule condition is true."
+        ::= { etherTypeAccessListEntry 2 }
+
+	etherTypeAccessListEtherType OBJECT-TYPE
+	SYNTAX	DisplayString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP protocol number (see IpProtocol)."
+        ::= { etherTypeAccessListEntry 3 }
+
+    etherTypeAccessListEtherTypeCodeMask OBJECT-TYPE
+	SYNTAX	DisplayString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The IP source address associated with this flow."
+        ::= { etherTypeAccessListEntry 4 }
+
+	etherTypeAccessListRemark OBJECT-TYPE 
+	SYNTAX	AccessListRemarkString
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Access list entry comment"
+        ::= { etherTypeAccessListEntry 5 }  
+        
+   	etherTypeAccessListLog OBJECT-TYPE 
+   	SYNTAX	INTEGER 
+   	{
+        undefined (0),
+        log  (1),
+        log-input (2)
+	}
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Enable normal or extended logging of this access-list rule."
+        ::= { etherTypeAccessListEntry 6 }  
+       
+	etherTypeAccessListRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "This indicates the row status & enables creation of rows in
+	     this table. In order to be consistent with ACL policy, this object 
+	     does not allow deletion of rules. The entire group must be deleted and all 
+	     rules removed at once."
+    ::= { etherTypeAccessListEntry 7 }
+
+  	etherTypeAccessListVlanId OBJECT-TYPE
+		SYNTAX INTEGER (0..4092)
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the customer VLAN.The object is meaningful only
+		 if etherTypeAccessListVlanMask is set."
+	::= { etherTypeAccessListEntry 8 }
+
+	etherTypeAccessListVlanMask OBJECT-TYPE
+		SYNTAX DisplayString
+		MAX-ACCESS read-create		
+		STATUS current                                                                        
+		DESCRIPTION
+		"This object shows the customer VLAN mask. It is meaningful only
+		 if etherTypeAccessListVlanId is set."
+	::= { etherTypeAccessListEntry 9 }
+
+  	etherTypeAccessListProviderVlanId OBJECT-TYPE
+		SYNTAX INTEGER (0..4092)
+		MAX-ACCESS read-create
+		STATUS current
+		DESCRIPTION
+		"This object shows the provider VLAN. The object is meaningful only
+		 if etherTypeAccessListProviderVlanMask is set."
+	::= { etherTypeAccessListEntry 10 }
+
+	etherTypeAccessListProviderVlanMask OBJECT-TYPE
+		SYNTAX DisplayString
+		MAX-ACCESS read-create		
+		STATUS current                                                                        
+		DESCRIPTION
+		"This object shows the provider VLAN mask. It is meaningful only 
+		 if etherTypeAccessListProviderVlanId is set.
+		 The value is in hexadecimal type string (0x..). "
+	::= { etherTypeAccessListEntry 11 }
+      
+    etherTypeAccessListProviderVpt OBJECT-TYPE 
+   		SYNTAX	INTEGER  (0..8)
+   		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	    "The vlan priority tag. A value of 8 means undefined. This object is meaningful 
+	    only if vlan-priority template is used."
+        ::= { etherTypeAccessListEntry 12 }  
+    -----------------------------------------------
+
+    accessListInterfaceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AccessListInterfaceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the assigment of access groups to an interface."
+	::= { accessListsInterfaces 1 }
+
+    accessListInterfaceEntry OBJECT-TYPE
+	SYNTAX	AccessListInterfaceEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    "An entry in the AccessListInterfaceEntry table."
+    INDEX { ifIndex, accessListInterfaceTableIndex, accessListInterfaceGroupIndex }
+	::= { accessListInterfaceTable 1 }
+
+    AccessListInterfaceEntry ::= SEQUENCE {
+        accessListInterfaceTableIndex	   INTEGER,
+        accessListInterfaceGroupIndex      INTEGER,
+        accessListInterfaceDscp            INTEGER,
+        accessListInterfaceRowStatus       RowStatus,
+        accessListInterfacePriority        INTEGER,
+        accessListInterfaceDiscard         AccessListDiscard,
+        accessListInterfaceRateLimit       Rate,
+		accessListInterfaceExceedAction    ExceedAction,
+        accessListInterfaceShaper          Shaper,
+        accessListInterfaceBurst           Rate,
+        accessListInterfaceRedirectIfIndex INTEGER,
+        accessListInterfaceRedirectVlanID 	INTEGER,
+        accessListInterfaceRedirectNexthop  IpAddress,
+        accessListInterfacePeakRate			Rate,  
+        accessListInterfacePeakBurst		Rate,  
+        accessListInterfaceColorAware		INTEGER,
+        accessListInterfacePolicy			INTEGER,
+        accessListInterfaceTrafficClass		INTEGER,
+        accessListInterfaceSpanRootTrack    INTEGER,
+        accessListInterfaceUntagFilter	    INTEGER,
+	accessListInterfaceTxq			INTEGER,
+	accessListInterfaceTxqDropLevel		TxqDropLevel,
+	accessListInterfaceApplyMirror		TruthValue,
+	accessListInterfaceStatistics		AccessListStatistics,
+	accessListInterfaceDirection		AccessListDirection,
+	accessListInterfaceRateStatistics		AccessListStatistics
+
+    }
+
+    accessListInterfaceTableIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This object identifies the row number for this (ifIndex) interface."
+	::= { accessListInterfaceEntry 1 }
+
+    accessListInterfaceGroupIndex OBJECT-TYPE
+	SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This indicates the index of the access group for this interface. This value is
+         the same as the value of accessListControlListGroup for the assigned ACL."
+    ::= { accessListInterfaceEntry 2 }
+
+    accessListInterfaceDscp OBJECT-TYPE
+	SYNTAX	INTEGER 
+				{
+				disable(0),
+				enable(1)
+				}	
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Enable Diffserv codepoint."
+    ::= { accessListInterfaceEntry 3}
+
+    accessListInterfaceRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "This indicates the row status & enables creation & deletion of lines in
+	     this (and related) tables. See SNMPv2-TC for more information."
+    ::= { accessListInterfaceEntry 4 }
+    
+    accessListInterfacePriority OBJECT-TYPE
+	SYNTAX INTEGER (0..8)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "Priority level value. Valid values are 0 to 7, 8 means undefined."
+    ::= { accessListInterfaceEntry 5 }
+    
+    accessListInterfaceDiscard OBJECT-TYPE
+	SYNTAX AccessListDiscard
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "Mark discardable or normal for priority on access group
+         Only the E-Series family and the G-Series family boards 
+         support the values green, yellow and red. Other
+         values are not supported by the E-Series and G-series."
+    ::= { accessListInterfaceEntry 6 }
+    
+    accessListInterfaceRateLimit OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The maximum rate in kBps(kilobytes per second)"
+        ::= { accessListInterfaceEntry 7 }
+
+    accessListInterfaceExceedAction OBJECT-TYPE
+	SYNTAX	ExceedAction
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The action to perform when the condition is true."
+        ::= { accessListInterfaceEntry 8 }
+
+    accessListInterfaceShaper OBJECT-TYPE
+	SYNTAX	Shaper
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Enable/disable shaper.
+         This object is supported only in B-series."
+        ::= { accessListInterfaceEntry 9 }
+
+    accessListInterfaceBurst OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The maximum Burst rate in kBps(kilobytes per second).
+	    This object is supported only by E-Series and G-series."
+        ::= { accessListInterfaceEntry 10 }
+
+    accessListInterfaceRedirectIfIndex OBJECT-TYPE
+	SYNTAX	INTEGER
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "This object controls redirection of traffic matching this ACG. If the
+             value is a valid ifIndex, the traffic will be redirected to it. If the value is 0 
+             redirection is disabled. Setting this object requires that accessListInterfaceRedirectVlanID is also set."
+        ::= { accessListInterfaceEntry 11 }  
+        
+    accessListInterfaceRedirectVlanID OBJECT-TYPE
+	SYNTAX	INTEGER
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "This object controls redirection of traffic matching this ACG. If the
+             value is a valid VLAN ID, the traffic will be redirected to it. If the value is 0 
+             redirection is disabled. If the device is TMetro, this object sets the tag substitution
+             policy for this access group"
+        ::= { accessListInterfaceEntry 12 }  
+        
+   	accessListInterfaceRedirectNexthop OBJECT-TYPE
+	SYNTAX	IpAddress
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "This object controls redirection of traffic matching this ACG. If the
+             value is a valid IP address then the traffic will be redirected to it. If the value is 0 
+             redirection is disabled."
+        ::= { accessListInterfaceEntry 13 }  
+        
+    accessListInterfacePeakRate OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Peak Information Rate in kBps(kilobytes per second)."
+        ::= { accessListInterfaceEntry 14 }
+
+    accessListInterfacePeakBurst OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Peak Burst Size in kBps(kilobytes per second)."
+        ::= { accessListInterfaceEntry 15 }
+
+    accessListInterfaceColorAware OBJECT-TYPE
+	SYNTAX	INTEGER {
+					disable (0),
+					enable (1)
+	}
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Toggle Color aware traffic metering. Disabled by default."
+        ::= { accessListInterfaceEntry 16 } 
+        
+   accessListInterfacePolicy OBJECT-TYPE
+	SYNTAX	INTEGER {
+					undefined (0),
+					dcsp (1),
+					priority (2),
+					priority-dp (3)
+	}
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Set remarking policy."
+        ::= { accessListInterfaceEntry 17 }
+
+    accessListInterfaceTrafficClass OBJECT-TYPE
+    	SYNTAX	INTEGER (0..256)   
+    		MAX-ACCESS	read-write
+			STATUS	current
+			DESCRIPTION
+	      "Diff Serv CP - Type of Service
+             In E-Series and G-series the range is 0..63. A value of 256 means Traffic Class is not set."
+        ::= { accessListInterfaceEntry 18 } 
+        
+     accessListInterfaceSpanRootTrack OBJECT-TYPE
+    	SYNTAX	INTEGER 
+				{
+				disable(0),
+				enable(1)
+				}	 
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	      "The span root track option for VLAN redirects."
+        ::= { accessListInterfaceEntry 19 }
+                                                
+      accessListInterfaceUntagFilter OBJECT-TYPE
+    	SYNTAX	INTEGER 
+				{
+				disable(0),
+				enable(1)
+				}	 
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	      "The filter for tagged or untagged backets to be applied."
+        ::= { accessListInterfaceEntry 20 }
+
+      accessListInterfaceTxq OBJECT-TYPE
+    	SYNTAX	INTEGER 
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	      "This object performs QoS and remarking of traffic matching an ACG"
+        ::= { accessListInterfaceEntry 21 }
+
+      accessListInterfaceTxqDropLevel OBJECT-TYPE
+    	SYNTAX	TxqDropLevel
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+		"This object shows the drop-level (green/yellow)
+		 and is related to accessListInterfaceTxq."
+        ::= { accessListInterfaceEntry 22 }
+
+	accessListInterfaceApplyMirror OBJECT-TYPE
+    	SYNTAX	TruthValue 
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	"This object shows that the traffic on the interface will be mirrored"
+        ::= { accessListInterfaceEntry 23 }
+
+	accessListInterfaceStatistics OBJECT-TYPE
+    	SYNTAX	AccessListStatistics 
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	"This object enables statistics on the interface."
+        ::= { accessListInterfaceEntry 24 }
+
+	accessListInterfaceDirection OBJECT-TYPE
+    	SYNTAX	AccessListDirection
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	"This object determines the ingress-egress type of applied ACL."
+        ::= { accessListInterfaceEntry 25 }
+
+	accessListInterfaceRateStatistics OBJECT-TYPE
+    	SYNTAX	AccessListStatistics 
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	"This object enables rate statistics on the interface."
+        ::= { accessListInterfaceEntry 26 }
+
+    -----------------------------------------------
+    accessListVLANTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AccessListVLANEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the assignment of access groups to a VLAN."
+	::= { accessListsVLAN 1 }
+
+    accessListVLANEntry OBJECT-TYPE
+	SYNTAX	AccessListVLANEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    "An entry in the AccessListVLANEntry table."
+    INDEX { dot1qVlanIndex, accessListVLANTableIndex, accessListVLANGroupIndex}
+	::= { accessListVLANTable 1 }
+
+    AccessListVLANEntry ::= SEQUENCE {
+        accessListVLANTableIndex      INTEGER,
+        accessListVLANGroupIndex      INTEGER,
+        accessListVLANDscp            INTEGER,
+        accessListVLANRowStatus       RowStatus,
+        accessListVLANPriority        INTEGER,
+        accessListVLANDiscard         AccessListDiscard,
+        accessListVLANRateLimit       Rate,
+		accessListVLANExceedAction    ExceedAction,
+		accessListVLANBurst           Rate,
+		accessListVLANRedirectIfIndex INTEGER,
+		accessListVLANRedirectVlanID 	INTEGER,
+        accessListVLANRedirectNexthop  IpAddress,
+        accessListVLANPeakRate			Rate,  
+        accessListVLANPeakBurst			Rate,  
+        accessListVLANColorAware		INTEGER,
+        accessListVLANPolicy			INTEGER,
+        accessListVLANTrafficClass		INTEGER,
+        accessListVLANSpanRootTrack     INTEGER,
+        accessListVLANUntagFilter			INTEGER,
+	accessListVLANApplyMirror	TruthValue,
+	accessListVLANStatistics	AccessListStatistics,
+	accessListVLANDirection			AccessListDirection
+        }
+
+    accessListVLANTableIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This object identifies the order in which the access group was applied on this VLAN."
+	::= { accessListVLANEntry 1 }
+
+    accessListVLANGroupIndex OBJECT-TYPE
+	SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This indicates the index of the access group for this VLAN. This value is 
+         the same as the value of accessListControlListGroup for the assigned ACL."
+    ::= { accessListVLANEntry 2 }
+
+    accessListVLANDscp OBJECT-TYPE
+	SYNTAX	INTEGER 
+				{
+				disable(0),
+				enable(1)
+				}	
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Enable Diffserv codepoint."
+
+    ::= { accessListVLANEntry 3}
+
+    accessListVLANRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "This indicates the row status & enables creation & delettion of rows in
+	     this and related tables. See SNMPv2-TC for more information."
+    ::= { accessListVLANEntry 4 }
+    
+    accessListVLANPriority OBJECT-TYPE
+	SYNTAX INTEGER (0..8)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "Priority level value. Valid values are 0 to 7, 8 means undefined."
+    ::= { accessListVLANEntry 5 }
+    
+    accessListVLANDiscard OBJECT-TYPE
+	SYNTAX AccessListDiscard
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "Mark discardable or normal for priority on access group
+         Only the E-Series family and the G-Series family boards 
+         support the values green, yellow and red. Other
+         values are not supported by the E-Series and G-series."
+    ::= { accessListVLANEntry 6 }
+    
+    accessListVLANRateLimit OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The maximum rate in kBps(kilobytes per second)."
+        ::= { accessListVLANEntry 7 }
+
+    accessListVLANExceedAction OBJECT-TYPE
+	SYNTAX	ExceedAction
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The action to perform when the condition is true."
+        ::= { accessListVLANEntry 8 }
+
+    accessListVLANBurst OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The maximum Burst rate in kBps(kilobytes per second).
+	    This object is supported only by E-Series and G-series."
+        ::= { accessListVLANEntry 9 }
+
+    accessListVLANRedirectIfIndex OBJECT-TYPE
+	SYNTAX	INTEGER
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "This object controls redirection of traffic matching this ACG. If the
+             value is a valid ifIndex, the traffic will be redirected to it. If the value is 0 
+             redirection is disabled. Setting this object requires that accessListInterfaceRedirectVlanID is also set."
+        ::= { accessListVLANEntry 10 }  
+    
+     accessListVLANRedirectVlanID OBJECT-TYPE
+	SYNTAX	INTEGER
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "his object controls redirection of traffic matching this ACG. If the
+             value is a valid VLAN ID, the traffic will be redirected to it. If the value is 0 
+             redirection is disabled. If the device is TMetro, this object sets the tag substitution
+             policy for this access group"
+        ::= { accessListVLANEntry 11 }  
+        
+   	accessListVLANRedirectNexthop OBJECT-TYPE
+	SYNTAX	IpAddress
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "This object controls redirection of traffic matching this ACG. If the
+             value is a valid IP address then the traffic will be redirected to it. If the value is 0 
+             redirection is disabled."
+        ::= { accessListVLANEntry 12 }  
+        
+    accessListVLANPeakRate OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Peak Information Rate in kBps(kilobytes per second)."
+        ::= { accessListVLANEntry 13 }
+
+    accessListVLANPeakBurst OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	     "Peak Burst Size in kBps(kilobytes per second)."
+        ::= { accessListVLANEntry 14 }
+
+    accessListVLANColorAware OBJECT-TYPE
+	SYNTAX	INTEGER {
+					disable (0),
+					enable (1)
+	}
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	       "Toggle Color aware traffic metering.Disabled by default."
+        ::= { accessListVLANEntry 15 } 
+        
+   accessListVLANPolicy OBJECT-TYPE
+	SYNTAX	INTEGER {
+					undefined (0),
+					dcsp (1),
+					priority (2),
+					priority-dp (3)
+	}
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Set remarking policy."
+        ::= { accessListVLANEntry 16 }
+                                        
+    accessListVLANTrafficClass OBJECT-TYPE
+    	SYNTAX	INTEGER (0..256)   
+    		MAX-ACCESS	read-write
+			STATUS	current
+			DESCRIPTION
+	      "Diff Serv CP - Type of Service
+             In E-Series and G-series the range is 0..63. A value of 256 means that Traffic Class is not set."
+        ::= { accessListVLANEntry 17 }
+                        
+     accessListVLANSpanRootTrack OBJECT-TYPE
+    	SYNTAX	INTEGER 
+				{
+				disable(0),
+				enable(1)
+				}	 
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	      "The span root track option for VLAN redirects."
+        ::= { accessListVLANEntry 18 }      
+        
+     accessListVLANUntagFilter OBJECT-TYPE
+    	SYNTAX	INTEGER 
+				{
+				disable(0),
+				enable(1)
+				}	 
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	      "The filter for tagged or untagged backets to be applied"
+        ::= { accessListVLANEntry 19 }
+
+     accessListVLANApplyMirror OBJECT-TYPE
+    	SYNTAX	TruthValue 
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	      "This object shows that the traffic on the interface will be mirrored."
+        ::= { accessListVLANEntry 20 }
+
+     accessListVLANStatistics OBJECT-TYPE
+    	SYNTAX	AccessListStatistics 
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	      "This object enables statistics on the interface."
+        ::= { accessListVLANEntry 21 }
+
+     accessListVLANDirection OBJECT-TYPE
+    	SYNTAX	AccessListDirection 
+		MAX-ACCESS	read-create
+		STATUS	current
+		DESCRIPTION
+	      "This object determines the ingress-egress type of applied ACL."
+        ::= { accessListVLANEntry 22 }
+
+    ----------------------------------------------------------------------------------
+	 accessListSapTable OBJECT-TYPE
+	    SYNTAX SEQUENCE OF AccessListSapEntry
+		MAX-ACCESS not-accessible
+		STATUS current
+		DESCRIPTION
+	        "This table controls the assigment of access groups to a SAP."
+		::= { accessListsServices 1 }
+	
+	    accessListSapEntry OBJECT-TYPE
+		SYNTAX	AccessListSapEntry
+		MAX-ACCESS	not-accessible
+		STATUS	current
+		DESCRIPTION
+		    "An entry in the AccessListSapEntry table."
+	    INDEX { svcId, sapPortId, sapEncapValue , accessListSapTableIndex, accessListSapGroupIndex }
+		::= { accessListSapTable 1 }
+	
+	    AccessListSapEntry ::= SEQUENCE {
+	        accessListSapTableIndex	   INTEGER,
+	        accessListSapGroupIndex      INTEGER,
+	        accessListSapRowStatus       RowStatus,
+	        accessListSapRateLimit       Rate,
+			accessListSapExceedAction    ExceedAction,
+	        accessListSapBurst           Rate,
+	        accessListSapPeakRate			Rate,  
+	        accessListSapPeakBurst		Rate,  
+	        accessListSapColorAware		INTEGER,
+	        accessListSapTxq			INTEGER,
+			accessListSapTxqDropLevel		TxqDropLevel,
+			accessListSapStatistics		AccessListStatistics,  
+			accessListSapRateStatistics    AccessListStatistics,
+			accessListSapDirection		AccessListDirection
+	    }
+
+    accessListSapTableIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This object identifies the row number for this (ifIndex) interface."
+	::= { accessListSapEntry 1 }
+
+    accessListSapGroupIndex OBJECT-TYPE
+	SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This indicates the index of the access group for this interface. This value is
+         the same as the value of accessListControlListGroup for the assigned ACL."
+    ::= { accessListSapEntry 2 }
+
+    
+    accessListSapRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "This indicates the row status & enables creation & deletion of lines in
+	     this (and related) tables. See SNMPv2-TC for more information."
+    ::= { accessListSapEntry 3 }
+    
+    accessListSapRateLimit OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The maximum rate in kBps(kilobytes per second)"
+        ::= { accessListSapEntry 4 }
+
+    accessListSapExceedAction OBJECT-TYPE
+	SYNTAX	ExceedAction
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The action to perform when the condition is true."
+        ::= { accessListSapEntry 5 }
+
+
+    accessListSapBurst OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The maximum Burst rate in kBps(kilobytes per second).
+	    This object is supported only by E-Series and G-series."
+        ::= { accessListSapEntry 6 }
+
+         
+    accessListSapPeakRate OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Peak Information Rate in kBps(kilobytes per second)."
+        ::= { accessListSapEntry 7 }
+
+    accessListSapPeakBurst OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Peak Burst Size in kBps(kilobytes per second)."
+        ::= { accessListSapEntry 8 }
+
+    accessListSapColorAware OBJECT-TYPE
+	SYNTAX	INTEGER {
+					disable (0),
+					enable (1)
+	}
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Toggle Color aware traffic metering. Disabled by default."
+        ::= { accessListSapEntry 9 } 
+        
+   
+     accessListSapTxq OBJECT-TYPE
+     SYNTAX	INTEGER 
+	 MAX-ACCESS	read-create
+	 STATUS	current
+	 DESCRIPTION
+     "This object performs QoS and remarking of traffic matching an ACG"
+      ::= { accessListSapEntry 10 }
+
+    accessListSapTxqDropLevel OBJECT-TYPE
+   	SYNTAX	TxqDropLevel
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	"This object shows the drop-level (green/yellow)
+	 and is related to accessListInterfaceTxq."
+     ::= { accessListSapEntry 11 }
+
+
+	accessListSapStatistics OBJECT-TYPE
+    	SYNTAX	AccessListStatistics 
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	"This object enables statistics on the SAP."
+        ::= { accessListSapEntry 12 }    
+    
+   accessListSapRateStatistics OBJECT-TYPE
+    	SYNTAX	AccessListStatistics 
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	"This object enables rate statistics on the SAP."
+        ::= { accessListSapEntry 13 }
+
+
+	accessListSapDirection OBJECT-TYPE
+   		SYNTAX	AccessListDirection
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	"This object determines the ingress-egress type of applied ACL."
+        ::= { accessListSapEntry 14 }
+
+    --------------------------------------------------------------            
+            
+    accessListInterfaceStatisticsTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AccessListInterfaceStatisticsEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table serves the interface statistics."
+	::= { accessListsInterfaceStatistics 1 }
+
+    accessListInterfaceStatisticsEntry OBJECT-TYPE
+	SYNTAX	AccessListInterfaceStatisticsEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    "An entry in the accessListInterfaceStatisticsTable table."
+    INDEX { ifIndex, accessListInterfaceStatisticsGroupIndex }
+	::= { accessListInterfaceStatisticsTable 1 }
+
+     AccessListInterfaceStatisticsEntry ::= SEQUENCE {
+        accessListInterfaceStatisticsGroupIndex	INTEGER,
+        accessListInterfaceGreenBytes	INTEGER,
+        accessListInterfaceYellowBytes	INTEGER,
+        accessListInterfaceRedBytes	INTEGER,
+		accessListInterfaceClassifiedPackets	INTEGER
+     }
+
+    accessListInterfaceStatisticsGroupIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This indicates the index of the access group for this interface. This value is
+ 	the same as the value of accessListControlListGroup for the assigned ACL."
+	::= { accessListInterfaceStatisticsEntry 1 }
+
+    accessListInterfaceGreenBytes OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object shows green traffic in bytes for access group with enabled rate-limit statistics."
+    ::= { accessListInterfaceStatisticsEntry 2 }
+
+    accessListInterfaceYellowBytes OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object shows yellow traffic in bytes for access group with enabled rate-limit statistics."
+    ::= { accessListInterfaceStatisticsEntry 3 }
+
+    accessListInterfaceRedBytes OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object shows red traffic in bytes for access group with enabled rate-limit statistics."
+    ::= { accessListInterfaceStatisticsEntry 4 }
+	
+	accessListInterfaceClassifiedPackets OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object shows match classified packets in bytes for access group with enabled statistics."
+    ::= { accessListInterfaceStatisticsEntry 5 }
+-----------------------------------------------------------------------------------------------------------    
+    accessListSapStatisticsTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF AccessListSapStatisticsEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table serves the Sap statistics."
+	::= { accessListsServicesStatistics 1 }
+
+    accessListSapStatisticsEntry OBJECT-TYPE
+	SYNTAX	AccessListSapStatisticsEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    "An entry in the accessListSapStatisticsTable table."
+    INDEX { svcId, sapPortId, sapEncapValue , accessListSapStatisticsGroupIndex }
+	::= { accessListSapStatisticsTable 1 }
+
+     AccessListSapStatisticsEntry ::= SEQUENCE {
+        accessListSapStatisticsGroupIndex	INTEGER,
+        accessListSapGreenBytes	INTEGER,
+        accessListSapYellowBytes	INTEGER,
+        accessListSapRedBytes	INTEGER,
+		accessListSapClassifiedPackets	INTEGER
+     }
+
+    accessListSapStatisticsGroupIndex OBJECT-TYPE
+    SYNTAX INTEGER (1..65535)
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This indicates the index of the access group for this Sap. This value is
+ 	the same as the value of accessListControlListGroup for the assigned ACL."
+	::= { accessListSapStatisticsEntry 1 }
+
+    accessListSapGreenBytes OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object shows green traffic in bytes for access group with enabled rate-limit statistics."
+    ::= { accessListSapStatisticsEntry 2 }
+
+    accessListSapYellowBytes OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object shows yellow traffic in bytes for access group with enabled rate-limit statistics."
+    ::= { accessListSapStatisticsEntry 3 }
+
+    accessListSapRedBytes OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object shows red traffic in bytes for access group with enabled rate-limit statistics."
+    ::= { accessListSapStatisticsEntry 4 }
+	
+	accessListSapClassifiedPackets OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object shows classified packets in bytes for access group with enabled match statistics."
+    ::= { accessListSapStatisticsEntry 5 }
+
+    -----------------------------------------------
+    
+    ispUpLinkTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IspUpLinkEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the ISP up-links. This table is supported only by B-Series."
+	::= { isp 1 }
+
+    ispUpLinkEntry OBJECT-TYPE
+	SYNTAX	IspUpLinkEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    "An entry in the ispUpLinkTable table."
+    INDEX { ispUpLinkIndex }
+	::= { ispUpLinkTable 1 }
+
+    IspUpLinkEntry ::= SEQUENCE {
+		ispUpLinkIndex       INTEGER,
+		ispUpLinkIfIndex     INTEGER,
+                ispUpLinkType        ISPType,
+                ispUpLinkAccessGroup INTEGER,
+		ispUpLinkVLANid      INTEGER,
+		ispUpLinkVLANtag     VlanTag,
+                ispUpLinkRowStatus   RowStatus
+   }
+
+	ispUpLinkIndex OBJECT-TYPE
+	SYNTAX	INTEGER (1..32)
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    "The ISP index."
+    ::= { ispUpLinkEntry 1 }
+
+	ispUpLinkIfIndex OBJECT-TYPE
+	SYNTAX	INTEGER
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The ifIndex (from RFC1213) that this ISP belongs to."
+    ::= { ispUpLinkEntry 2 }
+
+    ispUpLinkType OBJECT-TYPE
+	SYNTAX	ISPType
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The ispUpLinkType object shows if the ISP is connective or normal."
+        ::= { ispUpLinkEntry 3 }
+        
+    ispUpLinkAccessGroup OBJECT-TYPE
+	SYNTAX	INTEGER (1..199)
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "A valid index (accessListControlListGroup) from accessListControlTable.
+	     For the ISP up-link the index groups are 100..199."
+        ::= { ispUpLinkEntry 4 }
+
+    ispUpLinkVLANid OBJECT-TYPE
+	SYNTAX	INTEGER (0..4000)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "The VID for this link. 0 means no VID."
+    ::= { ispUpLinkEntry 5 }
+
+	ispUpLinkVLANtag OBJECT-TYPE
+	SYNTAX	VlanTag
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "Type of the VLAN - tagged or untagged."
+        ::= { ispUpLinkEntry 6 }
+
+    ispUpLinkRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	    "This indicates the row status and enables creation & deletion of rows in
+	     this and related tables. See SNMPv2-TC for more information."
+        ::= { ispUpLinkEntry 7 }
+
+    -----------------------------------------------
+
+    ispUserInterfaceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IspUserInterfaceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the assignment of ISP users to an interface.
+        This table is supported only by B-Series."
+	::= { isp 2 }
+
+    ispUserInterfaceEntry OBJECT-TYPE
+	SYNTAX	IspUserInterfaceEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    "An entry in the ispUserInterfaceTable table."
+    INDEX { ifIndex}
+	::= { ispUserInterfaceTable 1 }
+
+    IspUserInterfaceEntry ::= SEQUENCE {
+        ispUserInterfaceAssigen        AssigenValue,
+        ispUserInterfaceIspUplinkIndex INTEGER,
+        ispUserInterfaceRateLimit      Rate,
+	ispUserInterfaceConformAction  ConformAction,
+        ispUserInterfaceExceedAction   ExceedAction,
+        ispUserInterfaceShaper         Shaper
+   }
+
+	ispUserInterfaceAssigen OBJECT-TYPE
+	SYNTAX	AssigenValue
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "Indicates if an ISP user is assigned to this interface."
+        ::= { ispUserInterfaceEntry 1 }
+
+	ispUserInterfaceIspUplinkIndex OBJECT-TYPE
+	SYNTAX	INTEGER (1..32)
+	MAX-ACCESS	read-create
+	STATUS	current
+	DESCRIPTION
+	    "A valid index from ispUpLinkTable."
+        ::= { ispUserInterfaceEntry 2 }
+
+	ispUserInterfaceRateLimit OBJECT-TYPE
+	SYNTAX	Rate
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The maximum rate."
+        ::= { ispUserInterfaceEntry 3 }
+
+	ispUserInterfaceConformAction OBJECT-TYPE
+	SYNTAX	ConformAction
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The action to perform when the condition is true."
+        ::= { ispUserInterfaceEntry 4 }
+
+        ispUserInterfaceExceedAction OBJECT-TYPE
+	SYNTAX	ExceedAction
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "The action to perform when the condition is true."
+        ::= { ispUserInterfaceEntry 5 }
+
+        ispUserInterfaceShaper OBJECT-TYPE
+	SYNTAX	Shaper
+	MAX-ACCESS	read-write
+	STATUS	current
+	DESCRIPTION
+	    "This object controls the status of the shaper."
+        ::= { ispUserInterfaceEntry 6 }     
+        
+  standardAccessListRuleMatched  NOTIFICATION-TYPE
+       OBJECTS { ifIndex, dot1qVlanStatus, standardAccessListAction}
+         STATUS current
+         DESCRIPTION
+         "This trap indicates that a packet matching a standard ACL rule has been received."
+         ::= { prvtSwitchAccessListNotifications 1} 
+          
+  extendedAccessListRuleMatched  NOTIFICATION-TYPE
+  		OBJECTS { ifIndex, dot1qVlanStatus, extendedAccessListAction}
+         STATUS current
+         DESCRIPTION
+         "This trap indicates that a packet matching an extended ACL rule has been received."
+         ::= { prvtSwitchAccessListNotifications 2}  
+
+   macAccessListRuleMatched  NOTIFICATION-TYPE
+       OBJECTS { ifIndex, dot1qVlanStatus, macAccessListAction}
+         STATUS current
+         DESCRIPTION
+         "This trap indicates that a packet matching a mac ACL rule has been received."
+         ::= { prvtSwitchAccessListNotifications 3} 
+
+   etherTypeAccessListRuleMatched  NOTIFICATION-TYPE
+       OBJECTS { ifIndex, dot1qVlanStatus, etherTypeAccessListAction}
+         STATUS current
+         DESCRIPTION
+         "This trap indicates that a packet matching a ether-type ACL rule has been received."
+         ::= { prvtSwitchAccessListNotifications 4} 
+
+-- *******************************************************************
+--  Conformance Information
+-- *******************************************************************
+
+    prvtSwitchAccessListMibGroups       OBJECT IDENTIFIER ::= { prvtSwitchAccessListConformance 1 }
+
+
+    prvtSwitchAccessListNotificationGroup NOTIFICATION-GROUP
+    	NOTIFICATIONS {
+    		standardAccessListRuleMatched,
+    		extendedAccessListRuleMatched,
+		macAccessListRuleMatched,
+		etherTypeAccessListRuleMatched
+    	}
+	STATUS current
+     	DESCRIPTION
+        	"Private Notification Group."
+     ::= { prvtSwitchAccessListMibGroups 1 }
+
+END
+
+
+
diff --git a/MIBS/telco-systems/binos/PRVT-SWITCH-EFM-OAM-MIB b/MIBS/telco-systems/binos/PRVT-SWITCH-EFM-OAM-MIB
new file mode 100644
index 0000000..5907957
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SWITCH-EFM-OAM-MIB
@@ -0,0 +1,841 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-EFM-OAM-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-SWITCH-EFM-OAM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+NOTIFICATION-TYPE,
+Integer32,
+Counter32,
+Unsigned32
+FROM SNMPv2-SMI
+
+TruthValue,
+RowStatus,
+DisplayString
+FROM SNMPv2-TC
+
+dot3OamAdminState,
+dot3OamMode,
+dot3OamLoopbackStatus
+FROM DOT3-OAM-MIB
+
+ifIndex
+FROM IF-MIB
+
+PortList
+FROM Q-BRIDGE-MIB
+
+switch
+FROM PRVT-SWITCH-MIB;
+
+prvtSwitchEfmOamMIB MODULE-IDENTITY
+LAST-UPDATED "201002110000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB should provide general configuration and
+reports of this protocol that are not available in
+the standard DOT3-OAM-MIB, such as Enabling and Timers,
+as well as the ability to control private
+extensions added to the EFM OAM."
+
+-- revision history
+REVISION "201002110000Z"
+DESCRIPTION
+"Change oids for backward compatibility."
+
+REVISION "200912010000Z"
+DESCRIPTION
+"Added dying-gasp notification"
+
+REVISION "200906010000Z"
+DESCRIPTION
+"Changed limits for prvtEfmOamPingTable leafs"
+
+
+REVISION "200904290000Z"
+DESCRIPTION
+"Changed type for prvtEfmOamEventForwardStatus and
+prvtEfmOamEventForwardShutdown to PortList"
+
+
+REVISION "200903180000Z"
+DESCRIPTION
+"Fixed range and measurment unit for prvtEfmOamKeepAlive scalar"
+
+
+REVISION "200903060000Z"
+DESCRIPTION
+"Removed incorrect scalars
+Removed certain leafs in prvtEfmOamPingTable and prvtEfmOamLoopbackTable
+Modified prvtEfmOamPingResultTable and prvtEfmOamLoopbackResultTable"
+
+::= { switch 133 }
+
+-- ***********************************************
+-- ************ Top level structure of the MIB****
+-- ***********************************************
+prvtEfmOamNotifications OBJECT IDENTIFIER ::= { prvtSwitchEfmOamMIB 0 }
+prvtEfmOamObjects OBJECT IDENTIFIER ::= { prvtSwitchEfmOamMIB 1 }
+prvtEfmOamConformance OBJECT IDENTIFIER ::= { prvtSwitchEfmOamMIB 2 }
+
+-- ***********************************************
+-- ************* global scalar objects ***********
+-- ***********************************************
+prvtEfmOamEnable OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enable/disable the EFM OAM on the device"
+::= { prvtEfmOamObjects 1 }
+
+prvtEfmOamMultiPduCount OBJECT-TYPE
+SYNTAX Unsigned32 (1..10)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Number of OAM PDUs that will be sent when
+protocol ask to send multiple subsequent
+messages."
+DEFVAL { 5 }
+::= { prvtEfmOamObjects 2 }
+
+prvtEfmOamRemoteEvent OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enable or disable sending the local
+event notifications to the remote device."
+DEFVAL { true }
+::= { prvtEfmOamObjects 3 }
+
+prvtEfmOamLocalSysLog OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Disable/enable sending of Event Notification
+OAM PDU to the local Syslog daemon."
+DEFVAL { true }
+::= { prvtEfmOamObjects 4 }
+
+prvtEfmOamPriority OBJECT-TYPE
+SYNTAX Unsigned32 (0..8)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Priority of the sent OAM PDUs.
+Please note that value 8 represents no-priority."
+DEFVAL { 8 }
+::= { prvtEfmOamObjects 5 }
+
+prvtEfmOamKeepAlive OBJECT-TYPE
+SYNTAX Unsigned32 (100..15000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Aging interval (in miliseconds)of the last heard
+neighbouring device."
+DEFVAL { 5000 }
+::= { prvtEfmOamObjects 6 }
+
+prvtEfmOamHelloInterval OBJECT-TYPE
+SYNTAX Unsigned32 (100..5000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Maximal interval between a pair of PDUs in milliseconds."
+DEFVAL { 1000 }
+::= { prvtEfmOamObjects 7 }
+
+prvtEfmOamPktsSent OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Sent packets."
+::= { prvtEfmOamObjects 8 }
+
+prvtEfmOamPktsReceived OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Received packets."
+::= { prvtEfmOamObjects 9 }
+
+prvtEfmOamHistorySize OBJECT-TYPE
+SYNTAX Unsigned32 (1000..10000)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Number of entries in EFM_OAM history."
+DEFVAL { 5000 }
+::= { prvtEfmOamObjects 14 }
+
+-- ***********************************************
+-- ************* prvtEfmOamTable *****************
+-- ***********************************************
+
+
+prvtEfmOamTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtEfmOamEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table shall containg an entry per
+physical interface, indexed by the corresponding
+ifIndex from IF-MIB and each row in the
+table shall contain a single column."
+::= { prvtEfmOamObjects 10 }
+
+prvtEfmOamEntry OBJECT-TYPE
+SYNTAX PrvtEfmOamEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"EFM Entry"
+INDEX { ifIndex }
+::= { prvtEfmOamTable 1 }
+
+PrvtEfmOamEntry ::= SEQUENCE {
+prvtEfmOamEnhanceMode INTEGER,
+prvtEfmOamEventReturn Integer32,
+prvtEfmOamForceLoopbackLocal TruthValue,
+prvtEfmOamForceLoopbackRemote TruthValue,
+prvtEfmOamEventForwardStatus PortList,
+prvtEfmOamEventForwardShutdown PortList
+}
+
+prvtEfmOamEnhanceMode OBJECT-TYPE
+SYNTAX INTEGER {
+basic ( 1 ),
+enhance ( 2 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Used to be used to enable or disable EFM-OAM
+Vendor specific extensions on the
+specific interface. Values are :
+- basic(1) - no Vendor specific OAM
+extensions are used.
+- enhance(2) - when the remote device is detected
+as Vendor device, enhanced mode is used."
+DEFVAL { basic }
+::= { prvtEfmOamEntry 1 }
+
+prvtEfmOamEventReturn OBJECT-TYPE
+SYNTAX Integer32 (0 | 1..10)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"0 - feature is disabled (default value)
+1-10 - feature is enabled. The number
+specifies how many handshaking attempts
+will be done before shutting down the port."
+DEFVAL { 0 }
+::= { prvtEfmOamEntry 2 }
+
+prvtEfmOamForceLoopbackLocal OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"
+Used to force permanent loopback configuration
+on the local side.
+This is used for loopback traffic
+analysis for long term (for example,
+24 hours length infrastructure testing).
+"
+DEFVAL { false }
+::= { prvtEfmOamEntry 3 }
+
+prvtEfmOamForceLoopbackRemote OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"
+Used to force permanent loopback configuration
+on the remote side.
+This is used for loopback traffic
+analysis for long term (for example,
+24 hours length infrastructure testing).
+"
+DEFVAL { false }
+::= { prvtEfmOamEntry 4 }
+
+prvtEfmOamEventForwardStatus OBJECT-TYPE
+SYNTAX PortList
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"
+Forward a Link EventNotification on the specified target
+interface. Note that the interface which will
+forward the EventNotification must have efm-oam mode enabled.
+"
+::= { prvtEfmOamEntry 5 }
+
+prvtEfmOamEventForwardShutdown OBJECT-TYPE
+SYNTAX PortList
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"
+Shutdown a specified target interface as a
+result of the current interface status change.
+"
+::= { prvtEfmOamEntry 6 }
+
+-- ***********************************************
+-- ************ prvtEfmOamPingTable **************
+-- ***********************************************
+prvtEfmOamPing OBJECT IDENTIFIER ::= { prvtEfmOamObjects 11 }
+
+prvtEfmOamPingTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtEfmOamPingEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table let the EFM-OAM non-intrusive monitoring
+on the specific interface by querying a number
+of time aFramesTransmittedOK parameter, ping requests,
+using the variable retrieval EFM OAM PDU."
+::= { prvtEfmOamPing 1 }
+
+prvtEfmOamPingEntry OBJECT-TYPE
+SYNTAX PrvtEfmOamPingEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+""
+INDEX { ifIndex }
+::= { prvtEfmOamPingTable 1 }
+
+PrvtEfmOamPingEntry ::= SEQUENCE {
+prvtEfmOamPingEchoNumber Unsigned32,
+prvtEfmOamPingDelayTime Unsigned32,
+prvtEfmOamPingTimeOut Unsigned32,
+prvtEfmOamPingCounterBranch INTEGER,
+prvtEfmOamPingCounterLeaf INTEGER,
+prvtEfmOamPingRowStatus RowStatus
+}
+
+prvtEfmOamPingEchoNumber OBJECT-TYPE
+SYNTAX Unsigned32 (1..10)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The number of echo packets to send."
+DEFVAL { 5 }
+::= { prvtEfmOamPingEntry 1 }
+
+prvtEfmOamPingDelayTime OBJECT-TYPE
+SYNTAX Unsigned32 (0..600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The delay in seconds between packets."
+DEFVAL { 0 }
+::= { prvtEfmOamPingEntry 2 }
+
+prvtEfmOamPingTimeOut OBJECT-TYPE
+SYNTAX Unsigned32 (1..600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The time in seconds which the ping
+should wait for the response."
+DEFVAL { 2 }
+::= { prvtEfmOamPingEntry 3 }
+
+prvtEfmOamPingCounterBranch OBJECT-TYPE
+SYNTAX INTEGER
+{
+branch ( 7 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Set/get the counter of ping-like operation."
+::= { prvtEfmOamPingEntry 4 }
+
+prvtEfmOamPingCounterLeaf OBJECT-TYPE
+SYNTAX INTEGER
+{
+framesTransmittedOK ( 2 ),
+framesReceivedOK ( 5 ),
+octetsTransmittedOK ( 8 ),
+octetsReceivedOK ( 14 ),
+multicastFramesReceivedOK ( 21 ),
+broadcastFramesReceivedOK ( 22 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Set/get the counter of ping-like operation."
+::= { prvtEfmOamPingEntry 5 }
+
+prvtEfmOamPingRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+"Creation/delete/edit of the ping test."
+::= { prvtEfmOamPingEntry 6 }
+
+-- ***********************************************
+-- ******** prvtEfmOamPingResultTable ************
+-- ***********************************************
+prvtEfmOamPingResultTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtEfmOamPingResultEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Ping results."
+::= { prvtEfmOamPing 2 }
+
+prvtEfmOamPingResultEntry OBJECT-TYPE
+SYNTAX PrvtEfmOamPingResultEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+""
+INDEX { ifIndex }
+::= { prvtEfmOamPingResultTable 1 }
+
+PrvtEfmOamPingResultEntry ::= SEQUENCE {
+prvtEfmOamPingResultStatus INTEGER,
+prvtEfmOamPingResultSentPackets Counter32,
+prvtEfmOamPingResultReceivedPackets Counter32,
+prvtEfmOamPingResultRcvRateInteger Unsigned32,
+prvtEfmOamPingResultRcvRateFractional Unsigned32,
+prvtEfmOamPingResultTimeMin Unsigned32,
+prvtEfmOamPingResultTimeMax Unsigned32,
+prvtEfmOamPingResultAverageTimeInteger Unsigned32,
+prvtEfmOamPingResultAverageTimeFractional Unsigned32,
+prvtEfmOamPingResultClear INTEGER
+}
+
+prvtEfmOamPingResultStatus OBJECT-TYPE
+SYNTAX INTEGER
+{
+noPing ( 1 ),
+running ( 2 ),
+terminated ( 3 )
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Current ping operation status."
+::= { prvtEfmOamPingResultEntry 1 }
+
+prvtEfmOamPingResultSentPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Sent packets"
+::= { prvtEfmOamPingResultEntry 2 }
+
+prvtEfmOamPingResultReceivedPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Received packets"
+::= { prvtEfmOamPingResultEntry 3 }
+
+prvtEfmOamPingResultRcvRateInteger OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Ping receive rate - Integer part"
+::= { prvtEfmOamPingResultEntry 4 }
+
+prvtEfmOamPingResultRcvRateFractional OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Ping receive rate - Fractional part"
+::= { prvtEfmOamPingResultEntry 5 }
+
+prvtEfmOamPingResultTimeMin OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Ping minimum time."
+::= { prvtEfmOamPingResultEntry 6 }
+
+prvtEfmOamPingResultTimeMax OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Ping maximum time."
+::= { prvtEfmOamPingResultEntry 7 }
+
+prvtEfmOamPingResultAverageTimeInteger OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Ping average time - Integer part."
+::= { prvtEfmOamPingResultEntry 8 }
+
+prvtEfmOamPingResultAverageTimeFractional OBJECT-TYPE
+SYNTAX Unsigned32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Ping average time - Fractional part."
+::= { prvtEfmOamPingResultEntry 9 }
+
+prvtEfmOamPingResultClear OBJECT-TYPE
+SYNTAX INTEGER {
+none ( 0 ),
+clear ( 1 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Deleteper interface entries in prvtEfmOamPingResultTable."
+::= { prvtEfmOamPingResultEntry 10 }
+
+-- ***********************************************
+-- ************ prvtEfmOamLoopbackTable **********
+-- ***********************************************
+
+prvtEfmOamLoopback OBJECT IDENTIFIER ::= { prvtEfmOamObjects 12 }
+
+prvtEfmOamLoopbackTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtEfmOamLoopbackEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table should permit to perform EFM-OAM
+intrusive monitoring on the specific interface
+by setting the remote device into loopback state
+and generating test traffic.
+It should support:
+Storm operation, an operation that sets
+remote loopback, stops local data flow to the
+remote box and generates a packet burst by CPU.
+When the burst is received back it is validated
+and statistics are displayed. Burst operation,
+an operation that sets remote loopback, stops
+local data flow to the remote box and generates
+a packet test burst by the hardware (when available).
+It means a single packet generated by CPU is
+repetitively sent by the hardware. When the
+burst is received back it is ignored and only
+counters are displayed."
+::= { prvtEfmOamLoopback 1 }
+
+prvtEfmOamLoopbackEntry OBJECT-TYPE
+SYNTAX PrvtEfmOamLoopbackEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+""
+INDEX { ifIndex }
+::= { prvtEfmOamLoopbackTable 1 }
+
+PrvtEfmOamLoopbackEntry ::= SEQUENCE {
+prvtEfmOamLoopbackOperation INTEGER,
+prvtEfmOamLoopbackDuration Unsigned32,
+prvtEfmOamLoopbackCount Unsigned32,
+prvtEfmOamLoopbackPacketSize Unsigned32,
+prvtEfmOamLoopbackDelay Unsigned32,
+prvtEfmOamLoopbackTimeout Unsigned32,
+prvtEfmOamLoopbackNoRemote TruthValue,
+prvtEfmOamLoopbackRowStatus RowStatus
+}
+
+prvtEfmOamLoopbackOperation OBJECT-TYPE
+SYNTAX INTEGER {
+storm ( 1 ),
+burst ( 2 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Represent the operation that the
+should be performed on the interface."
+::= { prvtEfmOamLoopbackEntry 1 }
+
+prvtEfmOamLoopbackDuration OBJECT-TYPE
+SYNTAX Unsigned32 (1..600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Represent the amount of time burst test should run in seconds."
+DEFVAL { 10 }
+::= { prvtEfmOamLoopbackEntry 2 }
+
+prvtEfmOamLoopbackCount OBJECT-TYPE
+SYNTAX Unsigned32 (1..2147483646)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Represent the count of packets to send in storm operation."
+DEFVAL { 100 }
+::= { prvtEfmOamLoopbackEntry 3 }
+
+prvtEfmOamLoopbackPacketSize OBJECT-TYPE
+SYNTAX Unsigned32 (64..1512)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Represent the size of the test packet to use."
+DEFVAL { 64 }
+::= { prvtEfmOamLoopbackEntry 4 }
+
+prvtEfmOamLoopbackDelay OBJECT-TYPE
+SYNTAX Unsigned32 (0..600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Represent the delay between packets in seconds.
+The default value is 0 and represents no delay."
+DEFVAL { 0 }
+::= { prvtEfmOamLoopbackEntry 5 }
+
+prvtEfmOamLoopbackTimeout OBJECT-TYPE
+SYNTAX Unsigned32 (1..600)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Represent the wait for response in seconds."
+DEFVAL { 2 }
+::= { prvtEfmOamLoopbackEntry 6 }
+
+prvtEfmOamLoopbackNoRemote OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Add or not remote to loopback."
+DEFVAL { false }
+::= { prvtEfmOamLoopbackEntry 7 }
+
+prvtEfmOamLoopbackRowStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-create
+STATUS current
+DESCRIPTION
+""
+::= { prvtEfmOamLoopbackEntry 8 }
+
+-- ***********************************************
+-- ******** prvtEfmOamLoopbackResultTable ********
+-- ***********************************************
+prvtEfmOamLoopbackResultTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtEfmOamLoopbackResultEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Loopback results."
+::= { prvtEfmOamLoopback 2 }
+
+prvtEfmOamLoopbackResultEntry OBJECT-TYPE
+SYNTAX PrvtEfmOamLoopbackResultEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+""
+INDEX { ifIndex }
+::= { prvtEfmOamLoopbackResultTable 1 }
+
+PrvtEfmOamLoopbackResultEntry ::= SEQUENCE {
+prvtEfmOamLoopbackResultStatus INTEGER,
+prvtEfmOamLoopbackResultFlood INTEGER,
+prvtEfmOamLoopbackResultSentPackets Counter32,
+prvtEfmOamLoopbackResultReceivedPackets Counter32,
+prvtEfmOamLoopbackResultClear INTEGER
+}
+
+prvtEfmOamLoopbackResultStatus OBJECT-TYPE
+SYNTAX INTEGER
+{
+noLoopback ( 1 ),
+startCmdSent ( 2 ),
+startFail ( 3 ),
+dataStarted ( 4 ),
+stopCmdSent ( 5 ),
+terminated ( 6 ),
+remoteFailure ( 7 )
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Loopback result status"
+::= { prvtEfmOamLoopbackResultEntry 1 }
+
+prvtEfmOamLoopbackResultFlood OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Flood value"
+::= { prvtEfmOamLoopbackResultEntry 2 }
+
+prvtEfmOamLoopbackResultSentPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Sent packets"
+::= { prvtEfmOamLoopbackResultEntry 3 }
+
+prvtEfmOamLoopbackResultReceivedPackets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Received packets"
+::= { prvtEfmOamLoopbackResultEntry 4 }
+
+prvtEfmOamLoopbackResultClear OBJECT-TYPE
+SYNTAX INTEGER {
+none ( 0 ),
+clear ( 1 )
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Delete per interface entries in prvtEfmOamLoopbackResultTable."
+::= { prvtEfmOamLoopbackResultEntry 5 }
+
+
+-- ***********************************************
+-- ************ prvtEfmOamPeerTable **************
+-- ***********************************************
+
+prvtEfmOamPeerTable OBJECT-TYPE
+SYNTAX SEQUENCE OF PrvtEfmOamPeerEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table holds the peer extended information
+available only when local interface is set in
+enhanced mode (see prvtOamEnhanceMode) and the
+remote is detected as enhanced-mode device. This table
+shall containg an entry per physical interface,
+indexed by the corresponding ifIndex from IF-MIB."
+::= { prvtEfmOamObjects 13 }
+
+prvtEfmOamPeerEntry OBJECT-TYPE
+SYNTAX PrvtEfmOamPeerEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+""
+INDEX { ifIndex }
+::= { prvtEfmOamPeerTable 1 }
+
+PrvtEfmOamPeerEntry ::= SEQUENCE {
+prvtEfmOamPeerPort DisplayString,
+prvtEfmOamPeerName DisplayString
+}
+
+prvtEfmOamPeerPort OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Holds the peer port name as string
+as it is sent by the peer (eg: 1/2/1)."
+::= { prvtEfmOamPeerEntry 1 }
+
+prvtEfmOamPeerName OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Holds the peer hostname s string
+as it is sent by the peer."
+::= { prvtEfmOamPeerEntry 2 }
+
+-- ***********************************************
+-- **************** Notification *****************
+-- ***********************************************
+prvtOamLoopBackState NOTIFICATION-TYPE
+OBJECTS {
+ifIndex,
+dot3OamAdminState,
+dot3OamMode,
+dot3OamLoopbackStatus
+}
+STATUS current
+DESCRIPTION
+"This trap should be sent whenever the loopback
+state has been change from Remote, when dot3OamMode
+is passive or dot3OamAdminState is disable the
+interface cannot be on remoteLoopback state
+and should send this trap."
+::= { prvtEfmOamNotifications 1 }
+
+
+prvtOamDyingGasp NOTIFICATION-TYPE
+       STATUS  current
+       DESCRIPTION
+               "The notification alarms for a failure due to loss of local power
+                ('Dying Gasp')"
+       ::= { prvtEfmOamNotifications 2 }
+
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-SWITCH-EV-PROP-MIB b/MIBS/telco-systems/binos/PRVT-SWITCH-EV-PROP-MIB
new file mode 100644
index 0000000..9bda39c
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SWITCH-EV-PROP-MIB
@@ -0,0 +1,439 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-EV-PROP-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systemsproducts, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-SWITCH-EV-PROP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, NOTIFICATION-TYPE
+        FROM SNMPv2-SMI                  -- RFC2578
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
+        FROM SNMPv2-CONF                 -- RFC2580
+    RowStatus, TruthValue, DisplayString
+        FROM SNMPv2-TC                   -- RFC2579
+    switch
+        FROM PRVT-SWITCH-MIB;
+
+prvtEventPropagation MODULE-IDENTITY
+LAST-UPDATED "201101260000Z"         
+ORGANIZATION "BATM Advanced Communication"       
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB provides control over the Event Propagation feature"
+-- revision history
+        REVISION       "201101260000Z"
+        DESCRIPTION
+        "Add Event Propagation traps. Curate MIB descriptions. Correct MIB conformance."
+-- revision history
+        REVISION       "201101170000Z"
+        DESCRIPTION
+        "Add more profile event types and profile remote peer types."
+-- revision history
+        REVISION       "201008090000Z"
+        DESCRIPTION
+        "Fix limits for hold-off timer and wait-to-restore timer."
+-- revision history
+        REVISION       "201005200000Z"
+        DESCRIPTION
+        "Add support for hold-off timer and wait-to-restore timer."
+-- revision history
+        REVISION       "200909250000Z"
+        DESCRIPTION
+        "Initial version."
+
+::= { switch 166 }
+
+-- ***********************************************
+-- ************ Top level structure of the MIB****
+-- ***********************************************
+ prvtEvPropNotifications           OBJECT IDENTIFIER ::= { prvtEventPropagation 0 }
+ prvtEvPropObjects                 OBJECT IDENTIFIER ::= { prvtEventPropagation 1 }
+ prvtEvPropConformance             OBJECT IDENTIFIER ::= { prvtEventPropagation 2 }
+
+-- ***********************************************
+-- ************* global scalar objects ***********
+-- ***********************************************
+prvtEventPropagationProfile OBJECT IDENTIFIER ::= { prvtEvPropObjects 1 }
+prvtEventPropagationSession OBJECT IDENTIFIER ::= { prvtEvPropObjects 2 }
+
+prvtEventPropagationProfileTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtEventPropagationProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Profile table that holds the settings for the 
+        Event Propagation"
+    ::= { prvtEventPropagationProfile 1 }
+
+prvtEventPropagationProfileEntry OBJECT-TYPE
+        SYNTAX PrvtEventPropagationProfileEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+        "NONE"
+        INDEX { prvtEventPropagationProfileIndex }
+        ::= { prvtEventPropagationProfileTable 1 }
+
+PrvtEventPropagationProfileEntry ::= SEQUENCE {
+        prvtEventPropagationProfileIndex                Unsigned32,
+        prvtEventPropagationEvent                               INTEGER,
+        prvtEventPropagationRemotePeerType              INTEGER,
+        prvtEventPropagationRemotePeerID                DisplayString,
+        prvtEventPropagationActionID                    INTEGER,
+        prvtEventPropagationRevertiveActionID   INTEGER,
+        prvtEventPropagationProfileRowStatus    RowStatus,
+        prvtEventPropagationHoldTimer                   Unsigned32,
+        prvtEventPropagationWaitRestoreTimer    Unsigned32
+    }
+
+prvtEventPropagationProfileIndex OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+        "This is an unique identifier of the 
+        Event Propagation profile table."
+        ::= { prvtEventPropagationProfileEntry 1 }
+
+prvtEventPropagationEvent OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                notSpecified ( 1 ),
+                lossOfConnectivity ( 2 ),
+                receivedAIS ( 3 ),
+                receivedRDI ( 4 ),
+                interfaceDown ( 5 ),
+                testing ( 6 )
+        }
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "This leaf defines the type of event that will be monitored."
+        ::= { prvtEventPropagationProfileEntry 2 }
+
+prvtEventPropagationRemotePeerType OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                notSpecified ( 1 ),
+                macAddress ( 2 ),
+                remoteMep ( 3 ),
+                interfaceID ( 4 ),
+                ipv4Address ( 5 ),
+                localMep ( 6 ),
+                lagID ( 7 )
+        }
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "The peer type onto which the event is generated."
+        ::= { prvtEventPropagationProfileEntry 3 }
+
+prvtEventPropagationRemotePeerID OBJECT-TYPE
+        SYNTAX DisplayString (SIZE(1..32))
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "Remote peer ID"
+        ::= { prvtEventPropagationProfileEntry 4 }
+
+prvtEventPropagationActionID OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                notSpecified ( 1 ),
+                dropLink ( 2 )
+        }
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "Defines the action to be take in case of an event. "
+        ::= { prvtEventPropagationProfileEntry 5 }
+
+prvtEventPropagationRevertiveActionID OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                notSpecified ( 1 ),
+                restoreLink ( 2 )
+        }
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "Defines the revertive action to be take in case of
+        an event. "
+        ::= { prvtEventPropagationProfileEntry 6 }
+
+prvtEventPropagationProfileRowStatus OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+        "Creation/delete/edit of the Event Propagation profile. "
+        ::= { prvtEventPropagationProfileEntry 7 }
+        
+prvtEventPropagationHoldTimer OBJECT-TYPE
+        SYNTAX Unsigned32 (0..600000)
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "The action is performed after a period defined by the hold-off timer. 
+         The value is represented in milliseconds. 
+         A value of '0' depicts no wait period before performing the set action."
+        DEFVAL { 0 }
+        ::= { prvtEventPropagationProfileEntry 8 }
+        
+prvtEventPropagationWaitRestoreTimer OBJECT-TYPE
+        SYNTAX Unsigned32 (0..600)
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "The revertive action is performed after a period defined by the wait-to-restore timer. 
+         The value is represented in seconds.
+         A value of '0' depicts no wait period before a revertive action is performed."
+        DEFVAL { 0 }
+        ::= { prvtEventPropagationProfileEntry 9 }
+
+-- ***********************************************
+-- ************* global scalar objects ***********
+-- ***********************************************
+
+prvtEventPropagationSessionTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtEventPropagationSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "Session table that holds the settings for the 
+        Event Propagation"
+    ::= { prvtEventPropagationSession 1 }
+
+prvtEventPropagationSessionEntry OBJECT-TYPE
+        SYNTAX PrvtEventPropagationSessionEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+        "NONE"
+        INDEX { prvtEventPropagationProfileIndex, prvtEventPropagationSessionIndex }
+        ::= { prvtEventPropagationSessionTable 1 }
+
+PrvtEventPropagationSessionEntry ::= SEQUENCE {
+        prvtEventPropagationSessionIndex                                Unsigned32,
+        prvtEventPropagationSessionTargetType                   INTEGER,
+        prvtEventPropagationSessionTargetID                             DisplayString,
+        prvtEventPropagationLastActionCounter                   Counter32,
+        prvtEventPropagationLastRevertiveActionCounter  Counter32,
+        prvtEventPropagationSessionRowStatus                    RowStatus
+        }
+
+prvtEventPropagationSessionIndex OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+        "This is an unique identifier of the 
+        Event Propagation Session table."
+        ::= { prvtEventPropagationSessionEntry 1 }
+
+prvtEventPropagationSessionTargetType OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                notSpecified ( 1 ),
+                interfacePort ( 2 ),
+                interfaceSAP ( 3 )
+        }
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "The type of target this session affects."
+        ::= { prvtEventPropagationSessionEntry 2 }
+
+prvtEventPropagationSessionTargetID OBJECT-TYPE
+        SYNTAX DisplayString (SIZE(4..32))
+        MAX-ACCESS read-write
+        STATUS current
+        DESCRIPTION
+        "The targetID of this session.
+         It is held in a string that is represented as follows:
+                port - UUSSPP
+                SAP  - ServiceID/UUSSPP:c-vlan:s-vlan
+                        
+         e.g.:   port -  1101, 1207, 1310
+                         SAP  -  1/1101:1:22, 23/1112:24-26, 2756/1112:utag"
+        ::= { prvtEventPropagationSessionEntry 3 }
+
+
+prvtEventPropagationLastActionCounter OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "Counts the number of actions that occured."
+        ::= { prvtEventPropagationSessionEntry 4 }
+
+prvtEventPropagationLastRevertiveActionCounter OBJECT-TYPE
+        SYNTAX Counter32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "Counts the number of revertive actions that occured."
+        ::= { prvtEventPropagationSessionEntry 5 }
+
+prvtEventPropagationSessionRowStatus OBJECT-TYPE
+        SYNTAX RowStatus
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+        "Creation/delete/edit of the Event Propagation session. "
+        ::= { prvtEventPropagationSessionEntry 6 }
+
+-- ***********************************************
+-- **************** Notification *****************
+-- ***********************************************
+
+prvtEvPropAction NOTIFICATION-TYPE
+          OBJECTS {
+                  prvtEventPropagationEvent,
+                  prvtEventPropagationRemotePeerType,
+                  prvtEventPropagationRemotePeerID,
+                  prvtEventPropagationActionID
+          }
+          STATUS current
+          DESCRIPTION
+            "This trap should be sent whenever an action is
+                        performed."
+          ::= { prvtEvPropNotifications 1 }
+
+prvtEvPropRevert NOTIFICATION-TYPE
+          OBJECTS {
+                  prvtEventPropagationEvent,
+                  prvtEventPropagationRemotePeerType,
+                  prvtEventPropagationRemotePeerID,
+                  prvtEventPropagationRevertiveActionID
+          }
+          STATUS current
+          DESCRIPTION
+            "This trap should be sent whenever a revert action is
+                        performed."
+          ::= { prvtEvPropNotifications 2 }
+
+        
+        
+-- ******************************************************************
+-- PRVT-SWITCH-EV-PROP MIB Module - Conformance Information
+-- ******************************************************************
+
+prvtEvPropCompliances OBJECT IDENTIFIER ::= { prvtEvPropConformance 1 }
+prvtEvPropGroups      OBJECT IDENTIFIER ::= { prvtEvPropConformance 2 }
+
+-- ******************************************************************
+-- Units of conformance
+-- ******************************************************************
+
+prvtEvPropProfileGroup OBJECT-GROUP
+    OBJECTS {
+            prvtEventPropagationEvent,
+            prvtEventPropagationRemotePeerType,
+            prvtEventPropagationRemotePeerID,
+            prvtEventPropagationActionID,
+            prvtEventPropagationRevertiveActionID,
+            prvtEventPropagationProfileRowStatus,
+            prvtEventPropagationHoldTimer,
+            prvtEventPropagationWaitRestoreTimer
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Event Propagation profiles group."
+    ::= { prvtEvPropGroups 1 }
+    
+prvtEvPropSessionGroup OBJECT-GROUP
+    OBJECTS {
+        prvtEventPropagationSessionTargetType,        
+        prvtEventPropagationSessionTargetID,        
+        prvtEventPropagationLastActionCounter,        
+        prvtEventPropagationLastRevertiveActionCounter,        
+        prvtEventPropagationSessionRowStatus
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Event Propagation sessions group."
+    ::= { prvtEvPropGroups 2 }
+    
+prvtEvPropNotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+      prvtEvPropAction,
+      prvtEvPropRevert
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Event Propagation notifications group."
+    ::= { prvtEvPropGroups 3 }
+    
+-- ******************************************************************
+-- MIB Module Compliance statements
+-- ******************************************************************
+
+prvtEvPropCompliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for support of the Event Propagation MIB module."
+    MODULE
+        MANDATORY-GROUPS {
+            prvtEvPropProfileGroup,
+            prvtEvPropSessionGroup,
+            prvtEvPropNotificationsGroup
+            }
+
+    OBJECT prvtEventPropagationProfileRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    OBJECT prvtEventPropagationSessionRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+    ::= { prvtEvPropCompliances 1 }
+
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-SWITCH-FIB-MIB b/MIBS/telco-systems/binos/PRVT-SWITCH-FIB-MIB
new file mode 100644
index 0000000..2de1b52
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SWITCH-FIB-MIB
@@ -0,0 +1,260 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-FIB-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+-- *********************************************************************
+
+
+PRVT-SWITCH-FIB-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION, MacAddress
+        FROM SNMPv2-TC
+    NOTIFICATION-GROUP
+    	FROM SNMPv2-CONF
+    ipNetToMediaIfIndex,ipNetToMediaPhysAddress,ipNetToMediaNetAddress 
+    	FROM RFC1213-MIB
+
+    ipSwitch   FROM PRVT-SWITCH-MIB;  
+
+
+    prvtSwitchFIBMib MODULE-IDENTITY
+    LAST-UPDATED "200801010000Z"
+    ORGANIZATION "BATM Advanced Communication"
+    CONTACT-INFO
+        "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+    DESCRIPTION
+        "The FIB MIB module controls the IP forwarding database 
+        in L3 switches."
+
+    -- revision history    
+         REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions." 
+    REVISION     "200502180000Z"
+	DESCRIPTION
+					"Correction of the object descriptions." 
+					
+	REVISION     "200305080000Z"
+	DESCRIPTION
+					"Move to SMI-V2."
+
+    REVISION     "200205210959Z"
+    DESCRIPTION
+        "Add new IP trap"
+
+    REVISION     "200101210959Z"
+    DESCRIPTION
+        "Initial version."
+
+    ::= { ipSwitch 3 }
+
+
+    prvtSwitchFIBNotifications  OBJECT IDENTIFIER ::= { prvtSwitchFIBMib 0 }
+    fib OBJECT IDENTIFIER ::= { prvtSwitchFIBMib 1 }
+    prvtSwitchFIBConformance    OBJECT IDENTIFIER ::= { prvtSwitchFIBMib 3 }
+
+    fibTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF FibEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the IP forwarding database."
+	::= { fib 1 }
+
+    fibEntry OBJECT-TYPE
+	SYNTAX	FibEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    ""
+    INDEX { fibIP , fibMask }
+	::= { fibTable 1 }
+
+    FibEntry ::= SEQUENCE {
+        fibIP             IpAddress,
+        fibMask           IpAddress,
+        fibProtocol       INTEGER,
+        fibNextHop        IpAddress,
+        fibNextHopMac     MacAddress,
+	fibVID            INTEGER,
+        fibOutPort        INTEGER,
+        fibPriority       INTEGER,
+        fibDiscardabilty  INTEGER,
+        fibDSCP           OCTET STRING,
+        fibRowStatus      RowStatus
+    }
+
+    fibIP OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "This object identifies the name of the IP address of the FIB entry."
+    ::= { fibEntry 1 }
+
+    fibMask OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "This object identifies the IP address mask of the FIB entry."
+    ::= { fibEntry 2 }
+
+    fibProtocol OBJECT-TYPE
+    SYNTAX INTEGER {
+	    other (1),
+	    direct (2),
+	    static (3),
+	    icmp (4),
+	    egp (5),
+	    ggp (6),
+	    hello (7),
+	    rip (8),
+	    ospf (13),
+	    bgp (14),
+	    arp (15),
+	    remote (16),
+	    unknown (100)
+	    }
+    MAX-ACCESS read-only
+    STATUS current
+    DESCRIPTION
+        "This object identifies the IP address learning protocol type of the FIB entry."
+    ::= { fibEntry 3 }
+
+    fibNextHop OBJECT-TYPE
+    SYNTAX IpAddress
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object identifies the next hop IP address of the FIB entry."
+    ::= { fibEntry 4 }
+
+    fibNextHopMac OBJECT-TYPE
+    SYNTAX MacAddress
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object identifies the next hop MAC address of the FIB entry."
+    ::= { fibEntry 5 }
+
+    fibVID OBJECT-TYPE
+    SYNTAX INTEGER
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object identifies the VLAN ID of the FIB entry."
+    ::= { fibEntry 6 }
+
+    fibOutPort OBJECT-TYPE
+    SYNTAX INTEGER
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object identifies the output interface number of the FIB entry."
+    ::= { fibEntry 7 }
+
+    fibPriority OBJECT-TYPE
+    SYNTAX INTEGER (0..7)
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object identifies the FIB entry priority."
+    ::= { fibEntry 8 }
+
+    fibDiscardabilty OBJECT-TYPE
+    SYNTAX INTEGER {
+      discard (1),
+      nondiscard (0)
+      }
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object identifies the FIB entry discardabilty."
+    ::= { fibEntry 9 }
+
+    fibDSCP OBJECT-TYPE
+    SYNTAX OCTET STRING (SIZE (1))
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object identifies the FIB entry DSCP."
+    ::= { fibEntry 10 }
+
+    fibRowStatus OBJECT-TYPE
+    SYNTAX RowStatus
+    MAX-ACCESS read-write
+    STATUS current
+    DESCRIPTION
+        "This object indicates the row status, and enables creation & deletion of 
+        rows in this table. See SNMPv2-TC for more information."
+    ::= { fibEntry 11 }
+
+    newIP  NOTIFICATION-TYPE
+         OBJECTS { ipNetToMediaIfIndex,ipNetToMediaPhysAddress,ipNetToMediaNetAddress }
+         STATUS current
+         DESCRIPTION
+         "The newIP trap indicates that a new IP address was learnt by the switch
+          in ifIndex ipNetToMediaIfIndex and a MAC address - in ipNetToMediaPhysAddress.
+	 	  The IP address is given by ipNetToMediaNetAddress."
+         ::= { prvtSwitchFIBNotifications 1}
+
+-- *******************************************************************
+--  Conformance Information
+-- *******************************************************************
+
+    prvtSwitchFIBMIBGroups       OBJECT IDENTIFIER ::= { prvtSwitchFIBConformance 2 }
+
+
+    prvtSwitchFIBNotificationGroup NOTIFICATION-GROUP
+    	NOTIFICATIONS {
+    		newIP
+    	}
+	STATUS current
+     	DESCRIPTION
+        	"Private Notification Group."
+     ::= { prvtSwitchFIBMIBGroups 3 }
+END
+
diff --git a/MIBS/telco-systems/binos/PRVT-SWITCH-IPVLAN-MIB b/MIBS/telco-systems/binos/PRVT-SWITCH-IPVLAN-MIB
new file mode 100644
index 0000000..338c079
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SWITCH-IPVLAN-MIB
@@ -0,0 +1,353 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-IPVLAN-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+
+PRVT-SWITCH-IPVLAN-MIB DEFINITIONS ::= BEGIN
+IMPORTS
+    --IpAddress
+    --    FROM RFC1155-SMI
+    MODULE-IDENTITY, OBJECT-TYPE,IpAddress
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue, DisplayString, TEXTUAL-CONVENTION, MacAddress
+        FROM SNMPv2-TC
+    ifIndex 
+		FROM IF-MIB
+    dot1qVlanIndex
+        FROM Q-BRIDGE-MIB
+    ipSwitch   
+	                                     FROM PRVT-SWITCH-MIB;  
+
+
+    prvtSwitchIpVLANMib MODULE-IDENTITY
+    LAST-UPDATED "200801010000Z"
+    ORGANIZATION "BATM Advanced Communication"
+    CONTACT-INFO
+        "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+
+    DESCRIPTION
+        "The IpVLAN MIB module that controls the assignment of IP subnets 
+        to VLANs in L3 switches."
+
+    -- revision history
+         REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions." 
+     REVISION     "200611030959Z"
+    DESCRIPTION
+        "Fixed Some generic object declarations (ACCESS to MAX-ACCESS)
+Status set to current
+added table for loopback interfaces"
+     REVISION     "200502160959Z"
+    DESCRIPTION
+        "Fixed syntax errors and updated the contact info."
+    REVISION     "200011240959Z"
+    DESCRIPTION
+        "Initial version."
+
+    ::= { ipSwitch 2 }
+
+
+    ipInterface OBJECT IDENTIFIER ::= { prvtSwitchIpVLANMib 1 }
+    ipVLAN     OBJECT IDENTIFIER ::= { prvtSwitchIpVLANMib 2 }
+
+-- ****************
+-- ipInterfaceTable
+-- ****************
+
+    ipInterfaceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IpInterfaceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the creation of IP interfaces (subnets)."
+	::= { ipInterface 1 }
+
+    ipInterfaceEntry OBJECT-TYPE
+	SYNTAX	IpInterfaceEntry
+	MAX-ACCESS	not-accessible
+	STATUS current
+	DESCRIPTION
+	    ""
+    INDEX { ipInterfaceName }
+	::= { ipInterfaceTable 1 }
+
+    IpInterfaceEntry ::= SEQUENCE {
+        ipInterfaceName            INTEGER,
+        ipInterfaceIndex           INTEGER,
+        ipInterfaceType            INTEGER,
+        ipInterfaceIpAddress       IpAddress,
+        ipInterfaceSubnetMask      IpAddress,
+        ipInterfaceRowStatus       RowStatus
+    }
+
+    ipInterfaceName OBJECT-TYPE
+    SYNTAX INTEGER(0..256)
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object identifies the name of the IP interface, serves as an 
+        index to this table name, and can only be changed during row creation. 
+        The name is the integer part of the interface name; sw1 will be 1, sw5 
+        will be 5 etc.."
+	::= { ipInterfaceEntry 1 }
+	
+	ipInterfaceIndex OBJECT-TYPE
+    SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object identifies the index of the IP interface. 
+        This is the same index as ipAdEntIfIndex from MIB-II (ipAddrTable)."
+	::= { ipInterfaceEntry 2 }
+
+    ipInterfaceType OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+	  pseudoInterface (1),
+	  ipInterface     (2)
+	}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+        "This indicates a status of the IP interface. The value of this object 
+        is determined by the IP address. If the IP address field is 
+        empty (0.0.0.0) then this interface becomes a pseudo interface."
+    ::= { ipInterfaceEntry 3 }
+
+	ipInterfaceIpAddress OBJECT-TYPE
+	SYNTAX IpAddress
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object has the value of the switch IP address in this subnet. 
+	    A value of 0.0.0.0 will make this interface a pseudo interface."
+    ::= { ipInterfaceEntry 4 }
+
+	ipInterfaceSubnetMask OBJECT-TYPE
+	SYNTAX IpAddress
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object together with ipInterfaceIpAddress forms the IP 
+	    subnet, assigned to this IP interface. In case that ipInterfaceIpAddress 
+	    has the value of 0.0.0.0, this object will be ignored."
+    ::= { ipInterfaceEntry 5 }
+
+    ipInterfaceRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object indicates that the row status, and enables the creation & 
+	    deletion of rows in this table. See SNMPv2-TC for more information."
+    ::= { ipInterfaceEntry 6 }
+
+-- ****************
+-- ipLoInterfaceTable
+-- ****************
+
+    ipLoInterfaceTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IpLoInterfaceEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table controls the creation of IP LoopBack interfaces."
+	::= { ipInterface 2 }
+
+    ipLoInterfaceEntry OBJECT-TYPE
+	SYNTAX	IpLoInterfaceEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    ""
+    INDEX { ipLoInterfaceName }
+	::= { ipLoInterfaceTable 1 }
+
+    IpLoInterfaceEntry ::= SEQUENCE {
+        ipLoInterfaceName            INTEGER,
+        ipLoInterfaceIndex           INTEGER,
+        ipLoInterfaceType            INTEGER,
+        ipLoInterfaceIpAddress       IpAddress,
+        ipLoInterfaceSubnetMask      IpAddress,
+        ipLoInterfaceRowStatus       RowStatus
+    }
+
+    ipLoInterfaceName OBJECT-TYPE
+    SYNTAX INTEGER(1..9)
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object identifies the name of the IP interface, serves as an 
+        index to this table name, and can only be changed during row creation. 
+        The name is the integer part of the interface name; lo1 will be 1, lo5 
+        will be 5 etc.."
+	::= { ipLoInterfaceEntry 1 }
+	
+	ipLoInterfaceIndex OBJECT-TYPE
+    SYNTAX INTEGER
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+        "This object identifies the index of the IP interface. 
+        This is the same index as ipAdEntIfIndex from MIB-II (ipAddrTable)."
+	::= { ipLoInterfaceEntry 2 }
+
+    ipLoInterfaceType OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+	  pseudoInterface (1),
+	  ipInterface     (2)
+	}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+        "This indicates a status of the IP interface. The value of this object 
+        is determined by the IP address. If the IP address field is 
+        empty (0.0.0.0) then this interface becomes a pseudo interface."
+    ::= { ipLoInterfaceEntry 3 }
+
+	ipLoInterfaceIpAddress OBJECT-TYPE
+	SYNTAX IpAddress
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object has the value of the switch IP address in this subnet. 
+	    A value of 0.0.0.0 will make this interface a pseudo interface."
+    ::= { ipLoInterfaceEntry 4 }
+
+	ipLoInterfaceSubnetMask OBJECT-TYPE
+	SYNTAX IpAddress
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object together with ipInterfaceIpAddress forms the IP 
+	    subnet, assigned to this IP interface. In case that ipInterfaceIpAddress 
+	    has the value of 0.0.0.0, this object will be ignored."
+    ::= { ipLoInterfaceEntry 5 }
+
+  ipLoInterfaceRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object indicates that the row status, and enables the creation & 
+	    deletion of rows in this table. See SNMPv2-TC for more information."
+    ::= { ipLoInterfaceEntry 6 }
+
+
+-- ***********
+-- ipVLANTable
+-- ***********
+
+    ipVLANTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IpVLANEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table extends the table dot1qVlanStaticTable from Q-BRIDGE-MIB. 
+        It gives a connection between the IP Interface & the IP VLAN."
+	::= { ipVLAN 1 }
+
+    ipVLANEntry OBJECT-TYPE
+	SYNTAX	IpVLANEntry
+	MAX-ACCESS	not-accessible
+	STATUS current
+	DESCRIPTION
+	    ""
+    INDEX { dot1qVlanIndex, ipInterfaceName}
+   	::= { ipVLANTable 1 }
+
+    IpVLANEntry ::= SEQUENCE {
+        ipVLANStatus      INTEGER
+    }
+
+    ipVLANStatus OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+	  attached (1),
+	  detached (2)
+	}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object shows the VLAN on which the interface in the index 
+	    of the entry is installed and vice versa. See SNMPv2-TC for 
+	    more information."
+    ::= { ipVLANEntry 1 }
+
+   ipPortMappingTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF IpPortMappingEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table serves to map physical ports to SW interfaces in their 1:1 relationship. 
+        This means that we can map only one SW interface on a "
+	::= { ipVLAN 2 }
+  
+  ipPortMappingEntry OBJECT-TYPE
+	SYNTAX	IpPortMappingEntry
+	MAX-ACCESS	not-accessible
+	STATUS	current
+	DESCRIPTION
+	    ""
+    INDEX { ifIndex }
+   	::= { ipPortMappingTable 1 }
+
+    IpPortMappingEntry ::= SEQUENCE {
+        ipPortSwIface      INTEGER
+    }
+    
+  ipPortSwIface OBJECT-TYPE
+	SYNTAX INTEGER
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	    "This object shows the SW interfaces to which a particular port is mapped. If we
+	    want to detach the port and delete the mapping we need to set the value 256 which 
+	    is an invalid index for a SW interface."
+    ::= { ipPortMappingEntry 1 }  
+
+
+END
+
+
diff --git a/MIBS/telco-systems/binos/PRVT-SWITCH-MIB b/MIBS/telco-systems/binos/PRVT-SWITCH-MIB
new file mode 100644
index 0000000..936a763
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SWITCH-MIB
@@ -0,0 +1,1906 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-MIB.mib
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+--
+--
+PRVT-SWITCH-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY,
+OBJECT-TYPE,
+Counter32,
+Integer32,
+NOTIFICATION-TYPE
+FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION,
+DisplayString,
+TruthValue
+FROM SNMPv2-TC
+
+NOTIFICATION-GROUP
+FROM SNMPv2-CONF
+
+privateVendorOID
+FROM PRIV-VENDORDEF-MIB
+
+ifIndex,
+ifAdminStatus,
+ifOperStatus
+FROM IF-MIB;
+
+prvtSwitchMib MODULE-IDENTITY
+LAST-UPDATED "200906220000Z"
+ORGANIZATION "BATM Advanced Communication"
+CONTACT-INFO
+" BATM/Telco Systems Support team
+Email:
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"The switch MIB module for managing switch
+parameters"
+
+-- revision history
+REVISION "200906220000Z"
+DESCRIPTION
+"Add value unsupported(255) for object configL2IfaceAdminCrossOver."
+REVISION "200904140000Z"
+DESCRIPTION
+"Add description for reportsHardwareFanStatus 0."
+REVISION "200903080000Z"
+DESCRIPTION
+"Updated devices system OIDs."
+REVISION "200902200000Z"
+DESCRIPTION
+"Add support for temperature high limit (reportsHardwareTemperatureScale,reportsHardwareTemperatureHighLimit)."
+REVISION "200901120000Z"
+DESCRIPTION
+"Mark configL2IfaceDuplexSpeedSet. Add additional 10G value for
+configL2IfaceDuplexSpeedSet and reportsL2IfaceDuplexSpeedGet"
+REVISION "200809250000Z"
+DESCRIPTION
+"Add support for crossover and remote-fault-detect."
+REVISION "200803280000Z"
+DESCRIPTION
+"Updated devices system OIDs."
+REVISION "200802280000Z"
+DESCRIPTION
+"Added OIDs of various devices."
+REVISION "200712280000Z"
+DESCRIPTION
+"Added sysAssemblyNumber, sysPartNumber, sysCLEI, sysHwRevision, sysManufacturingDate objects"
+REVISION "200712120000Z"
+DESCRIPTION
+"Added configL2IfaceMtu."
+REVISION "200709260000Z"
+DESCRIPTION
+"Added new objects in configL2IfaceTable"
+REVISION "200704240000Z"
+DESCRIPTION
+"Updated OID definitions"
+REVISION "200702060000Z"
+DESCRIPTION
+"Updated description of reportsHardwarePSStatus object"
+REVISION "200610250000Z"
+DESCRIPTION
+"New OID group added"
+REVISION "200607020000Z"
+DESCRIPTION
+"Added T-Metro-ES and Alcatel system OID."
+REVISION "200606140000Z"
+DESCRIPTION
+"Changed mMiRIC-E1(89) to mMiRIC-E3(89)"
+REVISION "200604200000Z"
+DESCRIPTION
+"Added new duplex and speed values"
+REVISION "200602100000Z"
+DESCRIPTION
+"Added all missing port/module types"
+REVISION "200602020000Z"
+DESCRIPTION
+     	 "Defined the DUAL SFP module type"       
+REVISION "200512220000Z"
+DESCRIPTION
+"Added new object identifier for devices.
+Added new notification sysIntfModuleChange.
+Changed ModuleHwType modules that had '_' in them, should be with '-' instaead
+m100BaseGBIC_not_installed to m100BaseGBIC-not-installed.
+mCES_4TDM to mCES-4TDM,
+m1250BaseSingleFiber_SFP to m1250BaseSingleFiber-SFP."
+REVISION "200512080000Z"
+DESCRIPTION
+"Added the new sysIntfModuleChange notification for T-Metro devices."
+REVISION "200510030000Z"
+DESCRIPTION
+"Returned the old duplex-speed mixed object for backward compatability"
+REVISION "200509260000Z"
+DESCRIPTION
+"Separated the duplex mode and speed setting in the configL2Table"
+
+REVISION "200509070000Z"
+DESCRIPTION
+"Added the m1250BaseSingleFiber_SFP(87) port type"
+
+REVISION "200507200000Z"
+DESCRIPTION
+"Added the mCES_4TDM(86) port type"
+REVISION "200507080000Z"
+DESCRIPTION
+"Removed the range values for reportsL2IfaceUnit, reportsL2IfaceSlot and
+reportsL2IfacePort."
+
+REVISION "200503070000Z"
+DESCRIPTION
+"Added the mCES and 31000BaseX-SFP module types for T-Metro devices."
+
+REVISION "200502160000Z"
+DESCRIPTION
+"Fixed spelling errors and changed the contact info."
+
+REVISION "200502010000Z"
+DESCRIPTION
+"Added TMetro to sysProductsOids, added new module types: tMetroCES,
+tMetro2XSFPuplink, tMetro2F, tMetro1G"
+
+REVISION "200406290000Z"
+DESCRIPTION
+"Added T6Pro to sysProductsOids, added a new module type CPM"
+
+REVISION "200405030000Z"
+DESCRIPTION
+"Added support for exposing the switch series"
+
+REVISION "200403030000Z"
+DESCRIPTION
+"L2 Interface name (configL2IfaceName) max size changed from 16 to 256."
+
+REVISION "200402030000Z"
+DESCRIPTION
+"Addded m100BaseGBIC_not_installed to ModuleHwType."
+
+REVISION "200311180000Z"
+DESCRIPTION
+"Added sysManufacturing group,sysSerialNumber."
+
+REVISION "200310160000Z"
+DESCRIPTION
+"1. Added portRedundantLinkChange notification.
+2. Added reportsIfJack. This table enables support of interfaces attached to
+more then one physical interface.
+3. Added reportsL2IfaceActiveJackIndex."
+
+REVISION "200309090000Z"
+DESCRIPTION
+"Added SFP port types."
+
+REVISION "200307020000Z"
+DESCRIPTION
+"Added support for reporting hardware port type"
+
+REVISION "200305060000Z"
+DESCRIPTION
+"Move to SMI-V2."
+
+REVISION "200212120000Z"
+DESCRIPTION
+"Added support for controlling STP topology change detection"
+
+REVISION "200212010000Z"
+DESCRIPTION
+"Added support for Sniffer"
+
+REVISION "200211210000Z"
+DESCRIPTION
+"Added support for RSTP"
+
+REVISION "200211170000Z"
+DESCRIPTION
+"Added support for POS interface speed 155 & 622 M."
+
+REVISION "200209090000Z"
+DESCRIPTION
+"Added new module for T5Pro including ATM/MLP and 5 ports SM/MM."
+
+REVISION "200204100000Z"
+DESCRIPTION
+                "Add traps."
+REVISION "200108140000Z"
+DESCRIPTION
+"Distinction between set & get flow type to support flow auto-negotiation."
+REVISION "200107220000Z"
+DESCRIPTION
+"Added Default VLAN to configL2IfaceTable"
+REVISION "200107150000Z"
+DESCRIPTION
+"Added new sysIntfModule types m1000BaseGBIC_installed/not_installed"
+REVISION "200105170000Z"
+DESCRIPTION
+"Added t5ProRouter."
+REVISION "200105150000Z"
+DESCRIPTION
+"Added reportsHardware group."
+REVISION "200104190000Z"
+DESCRIPTION
+"Added config & reports group."
+REVISION "200104150000Z"
+DESCRIPTION
+"Added new modules to sysIntfModule."
+REVISION "200006280000Z"
+DESCRIPTION
+"Initial version."
+
+::= { switch 100 }
+
+--
+-- PRIVATE BRANCH PRODUCTS
+--
+prvt-products OBJECT IDENTIFIER ::= { privateVendorOID 1 }
+prvt-mgmt OBJECT IDENTIFIER ::= { privateVendorOID 2 }
+
+rptr OBJECT IDENTIFIER ::= { prvt-products 1 }
+bridge OBJECT IDENTIFIER ::= { prvt-products 2 }
+trclam OBJECT IDENTIFIER ::= { prvt-products 3 }
+router OBJECT IDENTIFIER ::= { prvt-products 4 }
+switch OBJECT IDENTIFIER ::= { prvt-products 5 }
+ipSwitch OBJECT IDENTIFIER ::= { prvt-products 6 }
+
+--
+-- L2 SWITCHES
+--
+
+bsw OBJECT IDENTIFIER ::= { switch 1 }
+tps OBJECT IDENTIFIER ::= { switch 2 }
+tpf OBJECT IDENTIFIER ::= { switch 3 }
+titan OBJECT IDENTIFIER ::= { switch 5 }
+titant5 OBJECT IDENTIFIER ::= { switch 7 }
+edgeLinkT4 OBJECT IDENTIFIER ::= { switch 15 }
+edgeLinkT5 OBJECT IDENTIFIER ::= { switch 17 }
+titanPro OBJECT IDENTIFIER ::= { switch 20}
+acs25L4282 OBJECT IDENTIFIER ::= { switch 500 }
+acs25L4282t5 OBJECT IDENTIFIER ::= { switch 502 }
+vol0215 OBJECT IDENTIFIER ::= { switch 999 }
+vol4000 OBJECT IDENTIFIER ::= { switch 998 }
+vol5000 OBJECT IDENTIFIER ::= { switch 996 }
+
+--
+-- Variable Type definitions
+--
+
+UnitIndex ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value represents the physical position of the unit inside the
+stack."
+SYNTAX INTEGER
+{
+master(1),
+slave1(2),
+slave2(3),
+slave3(4),
+slave4(5)
+}
+
+ModuleHwType ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value represents the physical type of the port or module."
+SYNTAX INTEGER
+{
+uninstalled(1),
+stacking(2),
+m100BaseTx(3),
+m100BaseFxVF45(4),
+
+m1000BaseSxSCMM850(6),
+m1000BaseLxSC1300(7), --Multi/Single Mode
+m1000BaseSCSMLDA(8),
+m1000BaseSCSMLDB(9),
+
+m1000BaseSxVF45MM850(10),
+m1000BaseLxVF451300(11), --Multi/Single Mode
+
+m1000BaseSxMTRJMM(12),
+m1000BaseLxMTRJ1300(13), --Multi/Single Mode
+
+m10BaseFlVF45(14),
+m10BaseFlVF45X4Ports(15),
+
+m100BaseFxSCMM(16),
+m100BaseFxSCSM(17),
+m100BaseFxSCSM2Port(18),
+m100BaseFxSCSMLD(19),
+m100BaseFxSCSMLD2Port(20),
+
+m100BaseFxMTRJMM(21),
+m100BaseFxMTRJSM(22),
+mDUAL-SFP(23),
+mDUAL-SFP-installed(24),
+
+m1000BaseTx(25),
+m1000BaseCx(26),
+
+mVDSLNT(30),
+mVDSLLT(31),
+
+mVDSLNTand100BaseTX(32),
+mVDSLLTand100BaseTX(33),
+
+mVDSLLT24Port(34),
+
+mLayer31000BaseSXSCMM(35),
+mLayer31000BaseLXSCSM(36),
+mLayer31000BaseSXSFFMM(37),
+mLayer31000BaseLXSFFSM(38),
+
+mLayer3100BaseFXSCMM2Port(39),
+mLayer3100BaseFXSCSM2Port(40),
+mLayer3100BaseFXSCMM4Port(41),
+mLayer3100BaseFXSCSM4Port(42),
+
+mLayer3100BaseFXSFFMM(43),
+mLayer3100BaseFXSFFSM(44),
+mLayer3100BaseTX(45),
+m1000BaseGBIC-installed(46),
+m1000BaseGBIC-not-installed(47),
+
+mLayer31000BaseSX-GIBIC(48),
+mLayer31000BaseLX-GIBIC(49),
+mLayer31000BaseCX-GIBIC(50),
+mLayer31000BaseT-GIBIC(51),
+mLayer3100BaseSMLCL-GIBIC(52),
+mLayer3100BaseM5o6SNI-GIBIC(53),
+mLayer31000BasePOSMM(54),
+mLayer31000BasePOSSM(55),
+mLayer3100BaseFXSFFMM20Port(56),
+mLayer3100BaseFXSFFSM20Port(57),
+mLayer3100BaseFXSFFMM5Port(58),
+mLayer3100BaseFXSFFSM5Port(59),
+mDS3ATM(60),
+mDS1MLP(61),
+mMLPmother(62),
+
+m1000BaseSFP-installed(63),
+mLayer31000BaseSX-SFP(65),
+mLayer31000BaseLX-SFP(66),
+mLayer31000BaseCX-SFP(67),
+mLayer31000BaseT-SFP(68),
+mLayer3100BaseSMLCL-SFP(69),
+mLayer3100BaseM5o6SNI-SFP(70),
+m100BaseGBIC-not-installed(71),
+mLayer310GBaseSR-XFP(72),
+mLayer310GBaseLR-XFP(73),
+mLayer310GBaseER-XFP(74),
+mLayer310GBaseSW-XFP(75),
+mLayer310GBaseLW-XFP(76),
+mLayer310GBaseEW-XFP(77),
+mLayer310GBase-XFP(78),
+m10000BaseMEDIA-not-installed(79),
+mCpmCard(80),
+mLayer310GBaseLRW-XFP(81),
+mLayer310GBaseERW-XFP(82),
+mLayer31000BaseX-SFP(83),
+mCES (84),
+mLayer3100BaseFX-SFP(85),
+mCES-4TDM(86),
+mLayer31000BaseLX-BD-SFP(87),
+mMiRIC-E1(88),
+mMiRIC-E3(89),
+mMiRIC-T1(90),
+mMiRIC-T3(91),
+
+mLayer31000BaseSFP-Unknown (92),
+m10000BaseXFP-Unknown (93),
+xAUI-1G-10G (94),
+mLayer3-10-1000BaseT (95),
+mLayer310GBaseSMSR-XFP (96),
+mLayer310GBaseSMLR-XFP (97),
+mLayer310GBaseSMER-XFP (98),
+mLayer310GBaseSMSW-XFP (99),
+mLayer310GBaseSMLW-XFP (101),
+mLayer310GBaseSMEW-XFP (102),
+mLayer310GBaseSMSRW-XFP (103),
+mLayer310GBaseSMLRW-XFP (104),
+mLayer310GBaseSMERW-XFP (105),
+mLayer310GBaseCpPgt-XFP (106),
+mLayer310GBaseSMZR-XFP (107),
+mLayer31000BaseZX-SFP (108),
+mLayer310GBaseSMZX-XFP (109),
+mLayer310GBaseSMEX-XFP (110),
+mLayer31000BaseT-WithoutAN-SFP(111),
+mLayer3100BaseLX-BD-SFP(112)
+}
+
+Series ::= TEXTUAL-CONVENTION
+STATUS current
+DESCRIPTION
+"This value represents the series of the switch."
+SYNTAX INTEGER
+{
+notExist(1),
+e-series(2),
+g-series(3),
+t-series(4)
+}
+--
+-- Groups
+--
+
+prvtSwitchNotifications OBJECT IDENTIFIER ::= { prvtSwitchMib 0 }
+sys OBJECT IDENTIFIER ::= { prvtSwitchMib 1 }
+config OBJECT IDENTIFIER ::= { prvtSwitchMib 2 }
+reports OBJECT IDENTIFIER ::= { prvtSwitchMib 3 }
+test OBJECT IDENTIFIER ::= { prvtSwitchMib 4 }
+commands OBJECT IDENTIFIER ::= { prvtSwitchMib 5 }
+prvtSwitchConformance OBJECT IDENTIFIER ::= { prvtSwitchMib 6 }
+
+--
+-- sys group
+--
+sysProductsOids OBJECT IDENTIFIER ::= { sys 1 }
+sysIntf OBJECT IDENTIFIER ::= { sys 2 }
+sysManufacturing OBJECT IDENTIFIER ::= { sys 3 }
+sysSwitchingHW OBJECT IDENTIFIER ::= { sys 4 }
+
+--
+-- sysOids Parameters
+--
+t4Router OBJECT IDENTIFIER ::= { sysProductsOids 1 }
+t5Router OBJECT IDENTIFIER ::= { sysProductsOids 2 }
+t5ProRouter OBJECT IDENTIFIER ::= { sysProductsOids 3 }
+t6Router OBJECT IDENTIFIER ::= { sysProductsOids 4 }
+t5c-48TRouter OBJECT IDENTIFIER ::= { sysProductsOids 5 }
+t5RNRouter OBJECT IDENTIFIER ::= { sysProductsOids 6 }
+t5c-24TRouter OBJECT IDENTIFIER ::= { sysProductsOids 7 }
+t5c-24MRouter OBJECT IDENTIFIER ::= { sysProductsOids 8 }
+t5c-24FRouter OBJECT IDENTIFIER ::= { sysProductsOids 9 }
+t5c-24GRouter OBJECT IDENTIFIER ::= { sysProductsOids 10 }
+t5c-24GTRouter OBJECT IDENTIFIER ::= { sysProductsOids 11 }
+t6pro-lc-20G OBJECT IDENTIFIER ::= { sysProductsOids 13 }
+t6pro-cpm OBJECT IDENTIFIER ::= { sysProductsOids 14 }
+tMetro OBJECT IDENTIFIER ::= { sysProductsOids 16 }
+tMarc OBJECT IDENTIFIER ::= { sysProductsOids 17 }
+aHUB1-A OBJECT IDENTIFIER ::= { sysProductsOids 18 }
+tMetro-ES OBJECT IDENTIFIER ::= { sysProductsOids 19 }
+
+tMarc-E OBJECT IDENTIFIER ::= { sysProductsOids 20 }
+tMarc-EW OBJECT IDENTIFIER ::= { sysProductsOids 21 }
+
+tMarc-WDB OBJECT IDENTIFIER ::= { sysProductsOids 22 }
+tMarc-WD OBJECT IDENTIFIER ::= { sysProductsOids 23 }
+tMarc-F OBJECT IDENTIFIER ::= { sysProductsOids 24 }
+
+t5c-XG OBJECT IDENTIFIER ::= { sysProductsOids 27 }
+
+compact OBJECT IDENTIFIER ::= { t6pro-cpm 1 }
+classic OBJECT IDENTIFIER ::= { t6pro-cpm 2 }
+
+as9205 OBJECT IDENTIFIER ::= { t5c-24TRouter 1 }
+as9205-F OBJECT IDENTIFIER ::= { t5c-24FRouter 1 }
+
+tMarc-250 OBJECT IDENTIFIER ::= { tMarc 1 }
+tMarc-254 OBJECT IDENTIFIER ::= { tMarc 2 }
+tMarc-254h OBJECT IDENTIFIER ::= { tMarc 3 }
+
+tMarc-340 OBJECT IDENTIFIER ::= { tMarc 10 }
+tMarc-380 OBJECT IDENTIFIER ::= { tMarc 11 }
+
+tMarc-340-E OBJECT IDENTIFIER ::= { tMarc-E 1 }
+tMarc-380-E OBJECT IDENTIFIER ::= { tMarc-E 2 }
+tMarc-340-EW OBJECT IDENTIFIER ::= { tMarc-EW 1 }
+tMarc-380-EW OBJECT IDENTIFIER ::= { tMarc-EW 2 }
+
+tMarc-340WD-B OBJECT IDENTIFIER ::= { tMarc-WDB 1 }
+
+tMarc-340WD OBJECT IDENTIFIER ::= { tMarc-WD 1 }
+
+tMarc-340-F OBJECT IDENTIFIER ::= { tMarc-F 1 }
+
+tMarc-280 OBJECT IDENTIFIER ::= { tMarc 20 }
+
+dm9225 OBJECT IDENTIFIER ::= { tMarc-250 1 }
+dm9225-E OBJECT IDENTIFIER ::= { tMarc-254 1 }
+dm9234 OBJECT IDENTIFIER ::= { tMarc-340 1 }
+
+alcatel-7250 OBJECT IDENTIFIER ::= { tMetro 1 }
+alcatel-7250-ES OBJECT IDENTIFIER ::= { tMetro-ES 1 }
+alcatel-7250-ESA OBJECT IDENTIFIER ::= { tMetro-ES 2 }
+
+tMetro-ESA OBJECT IDENTIFIER ::= { tMetro-ES 3 }
+
+as9220 OBJECT IDENTIFIER ::= { tMetro-ES 10 }
+tMetro-200S OBJECT IDENTIFIER ::= { tMetro-ES 11 }
+
+as9215 OBJECT IDENTIFIER ::= { t5c-XG 1 }
+
+bI-Ethernet OBJECT IDENTIFIER ::= { aHUB1-A 1 }
+fI-Ethernet OBJECT IDENTIFIER ::= { aHUB1-A 2 }
+
+-- Start L2 products
+t5c OBJECT IDENTIFIER ::= { sysProductsOids 100 }
+t5cgt OBJECT IDENTIFIER ::= { sysProductsOids 222 }
+t5g OBJECT IDENTIFIER ::= { sysProductsOids 333 }
+v24s OBJECT IDENTIFIER ::= { sysProductsOids 444 }
+
+-- Start VoIP products
+edgeGate281 OBJECT IDENTIFIER ::= { sysProductsOids 1000 }
+edgeGate281SYS OBJECT IDENTIFIER ::= { sysProductsOids 1001 }
+edgeGate231 OBJECT IDENTIFIER ::= { sysProductsOids 1010 }
+edgeGate282 OBJECT IDENTIFIER ::= { sysProductsOids 1020 }
+edgeGate282S OBJECT IDENTIFIER ::= { sysProductsOids 1021 }
+edgeGate482S OBJECT IDENTIFIER ::= { sysProductsOids 1022 }
+edgeGate483S OBJECT IDENTIFIER ::= { sysProductsOids 1023 }
+edgeGate483D OBJECT IDENTIFIER ::= { sysProductsOids 1024 }
+
+edgeGate201 OBJECT IDENTIFIER ::= { sysProductsOids 1031 }
+edgeGate232 OBJECT IDENTIFIER ::= { sysProductsOids 1041 }
+
+ac500 OBJECT IDENTIFIER ::= { sysProductsOids 1050 }
+ac505 OBJECT IDENTIFIER ::= { ac500 1 }
+ac512 OBJECT IDENTIFIER ::= { ac500 2 }
+ac524 OBJECT IDENTIFIER ::= { ac500 3 }
+
+--
+-- sys/Interfaces Parameters
+--
+sysIntfTable OBJECT-TYPE
+SYNTAX SEQUENCE OF SysIntfEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This table contains the interfaces module type."
+::= { sysIntf 1 }
+
+sysIntfEntry OBJECT-TYPE
+SYNTAX SysIntfEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"sysIntfEntry"
+INDEX { sysStackNo, sysSlotNo }
+::= { sysIntfTable 1 }
+
+SysIntfEntry ::= SEQUENCE {
+sysStackNo UnitIndex,
+sysSlotNo Integer32,
+sysIntfUnitExist INTEGER,
+sysIntfModule ModuleHwType
+}
+
+sysStackNo OBJECT-TYPE
+SYNTAX UnitIndex
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object identifies the switch"
+::= { sysIntfEntry 1 }
+
+sysSlotNo OBJECT-TYPE
+SYNTAX Integer32(0..256)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This indicates a single instance of a slot"
+::= { sysIntfEntry 2 }
+
+sysIntfUnitExist OBJECT-TYPE
+SYNTAX INTEGER {
+uninstalled(1),
+installed(2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This indicates interface module type"
+::= { sysIntfEntry 3 }
+
+sysIntfModule OBJECT-TYPE
+SYNTAX ModuleHwType
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This indicates interface module type"
+::= { sysIntfEntry 4 }
+
+sysSerialNumber OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the device's serial number, which is entered during the manufacturing process.
+"
+::= { sysManufacturing 1 }
+
+sysSwitchModel OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "Specifies the equipment model"
+::= { sysManufacturing 2 }
+
+sysAssemblyNumber OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "Specifies the equipment assembly number"
+::= { sysManufacturing 3 }
+
+sysPartNumber OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "Specifies the equipment part number"
+::= { sysManufacturing 4 }
+
+sysCLEI OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "Specifies the common language equipment identification"
+::= { sysManufacturing 5 }
+
+sysHwRevision OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "Specifies the HW revision"
+::= { sysManufacturing 6 }
+
+sysManufacturingDate OBJECT-TYPE
+SYNTAX DisplayString
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION "Specifies the manufacturing date"
+::= { sysManufacturing 7 }
+
+sysSwitchSeries OBJECT-TYPE
+SYNTAX Series
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This object displays the switch series."
+::= { sysSwitchingHW 1 }
+
+--
+-- config group
+--
+
+--
+-- L2 Group
+--
+--
+-- This group provides interface control and information not easily
+-- available from other MIBs.
+--
+configL2 OBJECT IDENTIFIER ::= { config 2 }
+
+configL2SpanOnOff OBJECT-TYPE
+SYNTAX INTEGER {
+enableSTP(1),
+disable(2),
+enableRSTP(3),
+enablePVST(4),
+enableMST(5)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enables/disables Spanning Tree. When Spanning Tree is disabled, the switch's ports are placed in
+forwarding mode, regardless of the current Spanning Tree state. When re-enabled, the normal state
+transitions take place."
+::= { configL2 1 }
+
+configL2IfaceTable OBJECT-TYPE
+SYNTAX SEQUENCE OF ConfigL2IfaceEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of Interfaces and their properties"
+::= { configL2 2 }
+
+configL2IfaceEntry OBJECT-TYPE
+SYNTAX ConfigL2IfaceEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An index of interfaces."
+INDEX { configL2IfaceUnit, configL2IfaceSlot,configL2IfacePort }
+::= { configL2IfaceTable 1 }
+
+ConfigL2IfaceEntry ::= SEQUENCE {
+configL2IfaceUnit Integer32,
+configL2IfaceSlot Integer32,
+configL2IfacePort Integer32,
+configL2IfaceName DisplayString,
+configL2IfaceEnable INTEGER,
+configL2IfaceSTPEnable INTEGER,
+configL2IfaceDuplexSpeedSet INTEGER,
+configL2IfaceFlow INTEGER,
+configL2IfaceBackpressure INTEGER,
+configL2IfaceResetCounters INTEGER,
+configL2IfaceDefaultVID Integer32,
+configL2IfaceSnifferIfIndex Integer32,
+configL2TopologyChangeDetection TruthValue,
+configL2IfaceDuplexModeSet INTEGER,
+configL2IfaceSpeedSet INTEGER,
+configL2IfaceBroadcastRateLimit Integer32,
+configL2IfaceMulticastRateLimit Integer32,
+configL2IfaceUnknownRateLimit Integer32,
+configL2IfaceBroadcastBurstSize Integer32,
+configL2IfaceMulticastBurstSize Integer32,
+configL2IfaceUnknownBurstSize Integer32,
+configL2IfaceMtu Integer32,
+configL2IfaceAdminCrossOver INTEGER,
+configL2IfaceRemoteFaultDetect INTEGER
+}
+
+configL2IfaceUnit OBJECT-TYPE
+SYNTAX Integer32(1..1000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"An index that uniquely identifies a unit in the
+Interface Table."
+::= { configL2IfaceEntry 1 }
+
+configL2IfaceSlot OBJECT-TYPE
+SYNTAX Integer32(1..1000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"An index that uniquely identifies a slot within the unit
+in the Interface Table."
+::= { configL2IfaceEntry 2 }
+
+configL2IfacePort OBJECT-TYPE
+SYNTAX Integer32(1..1000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"An index that uniquely identifies a port within the slot
+in the Interface Table."
+::= { configL2IfaceEntry 3 }
+
+configL2IfaceName OBJECT-TYPE
+SYNTAX DisplayString (SIZE (0..255))
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The textual name of this interface, e.g., 'John'."
+::= { configL2IfaceEntry 4 }
+
+configL2IfaceEnable OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enables (1)or disables (2) control for the interface.
+For this product, this is the ONLY way to enable or
+disable the interface. 'ifAdminStatus' in RFC1213 and
+'dot1dStpPortEnable' in RFC1493 are both implemented
+as 'read-only'."
+::= { configL2IfaceEntry 5 }
+
+configL2IfaceSTPEnable OBJECT-TYPE
+SYNTAX INTEGER {
+enable(1),
+disable(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Enables (1) and disables (2) Spanning Tree operation for this
+interface."
+::= { configL2IfaceEntry 6 }
+
+configL2IfaceDuplexSpeedSet OBJECT-TYPE
+SYNTAX INTEGER {
+autonegotiate(1),
+half-10(2),
+full-10(3),
+half-100(4),
+full-100(5),
+half-1000(6),
+full-1000(7),
+pos-155(8),
+pos-622(9),
+full-10000(10),
+half-auto(11),
+full-auto(12),
+auto-10(13),
+auto-100(14),
+auto-1000 (16),
+illegal(99)
+}
+MAX-ACCESS read-write
+STATUS obsolete
+DESCRIPTION
+"The desired speed and duplex mode for the interface. If the selected
+control is not available for the interface, a value of illegal (99)
+is returned. If the port type does NOT support the
+default of autonegotiate (1), then the application will
+initialize the port to a valid value (e.g., 1000full (6)).
+Note that not all controls are available for all interfaces.
+For example, only full-1000 (6) is available for Gigabit
+Ethernet interfaces.
+
+As this object was marked as obsolete the following two
+configurable parameters of an interface should be used:
+configL2IfaceDuplexModeSet, configL2IfaceSpeedSet "
+::= { configL2IfaceEntry 7 }
+
+configL2IfaceFlow OBJECT-TYPE
+SYNTAX INTEGER {
+autonegotiate(1), -- only for giga
+flowon(2),
+flowoff(3)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The desired flow mode for the interface. If the selected control is not available
+on the interface, a value of illegal (99) is returned. If the port type does NOT support
+the default value of autonegotiate (1), then the application will initialize the port to a
+valid value (e.g., 1000full (6)).Note that not all controls are available for all interfaces.
+For example, only full-1000 (6) is available for Gigabit Ethernet interfaces."
+::= { configL2IfaceEntry 8 }
+
+configL2IfaceBackpressure OBJECT-TYPE
+SYNTAX INTEGER {
+backpressureon(1),
+backpressureoff(2),
+illegal(99)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The desired back-pressure mode for the interface.
+If the selected control is not available on the interface,
+a value of illegal (99) is returned."
+::= { configL2IfaceEntry 9 }
+
+configL2IfaceResetCounters OBJECT-TYPE
+SYNTAX INTEGER {
+noop(1),
+reset(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object enables resetting the statistics counters selected for this
+port."
+::= { configL2IfaceEntry 10 }
+
+configL2IfaceDefaultVID OBJECT-TYPE
+SYNTAX Integer32(1..4095)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object sets the default VLAN ID according to 802.1Q."
+::= { configL2IfaceEntry 11 }
+
+configL2IfaceSnifferIfIndex OBJECT-TYPE
+SYNTAX Integer32(0..2147483647)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object connects this port to a sniffer port indexed by the specified ifIndex.
+Setting this value to 0 disconnects this port from the sniffer."
+::= { configL2IfaceEntry 12 }
+
+configL2TopologyChangeDetection OBJECT-TYPE
+SYNTAX TruthValue
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"This object controls the STP topology change detection for this interface."
+::= { configL2IfaceEntry 13 }
+
+configL2IfaceDuplexModeSet OBJECT-TYPE
+SYNTAX INTEGER {
+auto(1),
+full(2),
+half(3)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The duplex mode for the interface. If the port type does NOT support
+the default of autonegotiate (1), then the application will
+initialize the port to a valid value (e.g., full (2))."
+::= { configL2IfaceEntry 14 }
+
+configL2IfaceSpeedSet OBJECT-TYPE
+SYNTAX INTEGER {
+auto(1),
+speed-10(2),
+speed-100(3),
+speed-1000(4),
+speed-10000(5),
+pos-155(6),
+pos-622(7),
+illegal(99)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The desired speed and duplex mode for the interface. If the selected
+control is not available for the interface, a value of illegal (99)
+is returned. If the port type does NOT support the
+default of autonegotiate (1), then the application will
+initialize the port to a valid value (e.g., 1000 (3)).
+Note that not all controls are available for all interfaces.
+For example, only 1000 (4) is available for Gigabit
+Ethernet interfaces."
+::= { configL2IfaceEntry 15 }
+
+configL2IfaceBroadcastRateLimit OBJECT-TYPE
+SYNTAX Integer32(-1..2147483647)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Rate limit broadcast traffic. Must be a number between 64Kbps and 1Gbps,
+specified in Kbps."
+::= { configL2IfaceEntry 16 }
+
+configL2IfaceMulticastRateLimit OBJECT-TYPE
+SYNTAX Integer32(-1..2147483647)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Rate limit multicast traffic. Must be a number between 64Kbps and 1Gbps,
+specified in Kbps."
+::= { configL2IfaceEntry 17 }
+
+configL2IfaceUnknownRateLimit OBJECT-TYPE
+SYNTAX Integer32(-1..2147483647)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Rate limit unknown traffic. Must be a number between 64Kbps and 1Gbps,
+specified in Kbps. For detail information see documentation."
+::= { configL2IfaceEntry 18 }
+
+configL2IfaceBroadcastBurstSize OBJECT-TYPE
+SYNTAX Integer32(-1..2147483647)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Burst size broadcast traffic. Must be a number between 12Kbps and 1Mbps,
+specified in Kbps."
+::= { configL2IfaceEntry 19 }
+
+configL2IfaceMulticastBurstSize OBJECT-TYPE
+SYNTAX Integer32(-1..2147483647)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Burst size multicast traffic. Must be a number between 12Kbps and 1Mbps,
+specified in Kbps."
+::= { configL2IfaceEntry 20 }
+
+configL2IfaceUnknownBurstSize OBJECT-TYPE
+SYNTAX Integer32(-1..2147483647)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Burst size unknown traffic. Must be a number between 12Kbps and 1Mbps,
+specified in Kbps. For detail information see documentation."
+::= { configL2IfaceEntry 21 }
+
+configL2IfaceMtu OBJECT-TYPE
+SYNTAX Integer32 (512..9216)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The Maximum Transmission Unit (in octets) of the interface."
+DEFVAL { 1528 }
+::= { configL2IfaceEntry 22 }
+
+configL2IfaceAdminCrossOver OBJECT-TYPE
+SYNTAX INTEGER {
+auto(1),
+mdi(2),
+mdi-x(3),
+unsupported(255)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"The administrative MDI/MDI-X cable connection status of ports, as specified in IEEE 803.2.
+The mdi-x mode (crossover) is configured (3), the interface works in MDI-X mode.
+The mdi mode (2) defines port to work in standard MDI mode.
+The auto (1) defines automatic crossover detection, and any type of MDI/MDI-X cabling can be used on the port.
+Note: This attribute can be configured only on interfaces that support that option."
+::= { configL2IfaceEntry 23 }
+
+configL2IfaceRemoteFaultDetect OBJECT-TYPE
+SYNTAX INTEGER {
+enableRemoteFaultDetect(1),
+disableRemoteFaultDetect(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Controls the remote fault detection on interfaces, connected to 100Base Fiber pair.
+Once enabled (1), the switch will indicate link-down event on the interface, once remote
+peer detects link down.
+Note: Relevant only on 100Base Fiber interfaces."
+::= { configL2IfaceEntry 24 }
+
+--
+-- reports group
+--
+reportsL2 OBJECT IDENTIFIER ::= { reports 1 }
+
+--
+-- L2 Group
+--
+--
+-- This group provides interface information not easily
+-- available from other MIBs.
+--
+
+reportsL2IfaceTable OBJECT-TYPE
+SYNTAX SEQUENCE OF ReportsL2IfaceEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"A list of Interfaces and their properties"
+::= { reportsL2 1 }
+
+reportsL2IfaceEntry OBJECT-TYPE
+SYNTAX ReportsL2IfaceEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An index of interfaces."
+INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot,reportsL2IfacePort }
+::= { reportsL2IfaceTable 1 }
+
+ReportsL2IfaceEntry ::= SEQUENCE {
+reportsL2IfaceUnit Integer32,
+reportsL2IfaceSlot Integer32,
+reportsL2IfacePort Integer32,
+reportsL2IfaceBridgeIndex Integer32,
+reportsL2IfaceType INTEGER,
+reportsL2IfaceLink INTEGER,
+reportsL2IfaceDuplexSpeedGet INTEGER,
+reportsL2IfaceTXOctetsNoErr Counter32,
+reportsL2IfaceTXPacketsNoErr Counter32,
+reportsL2IfaceRXOctetsNoErr Counter32,
+reportsL2IfaceRXPacketsNoErr Counter32,
+reportsL2IfaceIfInOctets Counter32,
+reportsL2IfaceIfInUcastPkts Counter32,
+reportsL2IfaceIfInNUcastPkts Counter32,
+reportsL2IfaceIfInDiscards Counter32,
+reportsL2IfaceIfInErrors Counter32,
+reportsL2IfaceIfInUnknownProtos Counter32,
+reportsL2IfaceIfOutOctets Counter32,
+reportsL2IfaceIfOutUcastPkts Counter32,
+reportsL2IfaceIfOutNUcastPkts Counter32,
+reportsL2IfaceIfOutDiscards Counter32,
+reportsL2IfaceIfOutErrors Counter32,
+reportsL2IfaceStatsDropEvents Counter32,
+reportsL2IfaceStatsOctets Counter32,
+reportsL2IfaceStatsPkts Counter32,
+reportsL2IfaceStatsBroadcastPkts Counter32,
+reportsL2IfaceStatsMulticastPkts Counter32,
+reportsL2IfaceStatsCRCAlignErrors Counter32,
+reportsL2IfaceStatsUndersizePkts Counter32,
+reportsL2IfaceStatsOversizePkts Counter32,
+reportsL2IfaceStatsFragments Counter32,
+reportsL2IfaceStatsJabbers Counter32,
+reportsL2IfaceStatsCollisions Counter32,
+reportsL2IfaceStatsPkts64Octets Counter32,
+reportsL2IfaceStatsPkts65to127Octets Counter32,
+reportsL2IfaceStatsPkts128to255Octets Counter32,
+reportsL2IfaceStatsPkts256to511Octets Counter32,
+reportsL2IfaceStatsPkts512to1023Octets Counter32,
+reportsL2IfaceStatsPkts1024to1518Octets Counter32,
+reportsL2IfaceFlow INTEGER,
+reportsL2IfaceHWType ModuleHwType,
+reportsL2IfaceActiveJackIndex Integer32
+}
+
+reportsL2IfaceUnit OBJECT-TYPE
+SYNTAX Integer32(1..1000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"An index that uniquely identifies a unit in the
+Interface Table."
+::= { reportsL2IfaceEntry 1 }
+
+reportsL2IfaceSlot OBJECT-TYPE
+SYNTAX Integer32 (1..1000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"An index that uniquely identifies a slot within the unit
+in the Interface Table."
+::= { reportsL2IfaceEntry 2 }
+
+reportsL2IfacePort OBJECT-TYPE
+SYNTAX Integer32(1..1000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"An index that uniquely identifies a port within the slot
+in the Interface Table."
+::= { reportsL2IfaceEntry 3 }
+
+reportsL2IfaceBridgeIndex OBJECT-TYPE
+SYNTAX Integer32(1..1000)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"This is the bridge index of this port."
+::= { reportsL2IfaceEntry 4 }
+
+reportsL2IfaceType OBJECT-TYPE
+SYNTAX INTEGER {
+other(1), -- none of the following
+regular1822(2),
+hdh1822(3),
+ddn-x25(4),
+rfc877-x25(5),
+ethernet-csmacd(6),
+iso88023-csmacd(7),
+iso88024-tokenBus(8),
+iso88025-tokenRing(9),
+iso88026-man(10),
+starLan(11),
+proteon-10Mbit(12),
+proteon-80Mbit(13),
+hyperchannel(14),
+fddi(15),
+lapb(16),
+sdlc(17),
+ds1(18), -- T-1
+e1(19), -- European equivalent of T-1
+basicISDN(20),
+primaryISDN(21), -- proprietary serial
+propPointToPointSerial(22),
+ppp(23),
+softwareLoopback(24),
+eon(25), -- CLNP over IP [11]
+ethernet-3Mbit(26),
+nsip(27), -- XNS over IP
+slip(28), -- generic SLIP
+ultra(29), -- ULTRA technologies
+ds3(30), -- T-3
+sip(31), -- SMDS
+frame-relay(32)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The type of interface, repeated here from the definitions
+in RFC1213 as a matter of convenience."
+::= { reportsL2IfaceEntry 5 }
+
+reportsL2IfaceLink OBJECT-TYPE
+SYNTAX INTEGER {
+up(1),
+down(2)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The state of Link Detect on the interface."
+::= { reportsL2IfaceEntry 6 }
+
+reportsL2IfaceDuplexSpeedGet OBJECT-TYPE
+SYNTAX INTEGER {
+unknown(1),
+half-10(2),
+full-10(3),
+half-100(4),
+full-100(5),
+half-1000(6),
+full-1000(7),
+pos-155(8),
+pos-622(9),
+full-10000(10),
+illegal(99)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The actual speed and duplex for the interface. If the
+interface is not configured to one of the acceptable
+values, a value of illegal (99) is returned."
+::= { reportsL2IfaceEntry 7 }
+
+reportsL2IfaceTXOctetsNoErr OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of octets transmitted from the interface. This
+number does not include octets with errors."
+::= { reportsL2IfaceEntry 8 }
+
+reportsL2IfaceTXPacketsNoErr OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of packets transmitted from the interface. This
+number does not include packets with errors."
+::= { reportsL2IfaceEntry 9 }
+
+reportsL2IfaceRXOctetsNoErr OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of octets received on the interface. This
+number does not include octets with errors."
+::= { reportsL2IfaceEntry 10 }
+
+reportsL2IfaceRXPacketsNoErr OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of packets received on the interface. This
+number does not include packets with errors."
+::= { reportsL2IfaceEntry 11 }
+
+reportsL2IfaceIfInOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of octets received on the
+interface, including framing characters."
+::= { reportsL2IfaceEntry 12 }
+
+reportsL2IfaceIfInUcastPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of subnetwork-unicast packets
+delivered to a higher-layer protocol."
+::= { reportsL2IfaceEntry 13 }
+
+reportsL2IfaceIfInNUcastPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of non-unicast (i.e., subnetwork-
+broadcast or subnetwork-multicast) packets
+delivered to a higher-layer protocol."
+::= { reportsL2IfaceEntry 14 }
+
+reportsL2IfaceIfInDiscards OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of inbound packets that were chosen
+to be discarded even if no errors that prevent their deliverability
+to a higher-layer protocol had been detected. One possible reason for
+discarding such a packet could be to free buffer space."
+::= { reportsL2IfaceEntry 15 }
+
+reportsL2IfaceIfInErrors OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of inbound packets that contained
+errors preventing them from being deliverable to a
+higher-layer protocol."
+::= { reportsL2IfaceEntry 16 }
+
+reportsL2IfaceIfInUnknownProtos OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of packets received via the interface
+that were discarded because of an unknown or
+unsupported protocol."
+::= { reportsL2IfaceEntry 17 }
+
+reportsL2IfaceIfOutOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of octets transmitted out of the
+interface, including framing characters."
+::= { reportsL2IfaceEntry 18 }
+
+reportsL2IfaceIfOutUcastPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets that higher-level
+protocols requested to be transmitted to a
+subnetwork-unicast address, including those that
+were discarded or not sent."
+::= { reportsL2IfaceEntry 19 }
+
+reportsL2IfaceIfOutNUcastPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets that higher-level
+protocols requested to be transmitted to a non-
+unicast (i.e., a subnetwork-broadcast or
+subnetwork-multicast) address, including those
+that were discarded or not sent."
+::= { reportsL2IfaceEntry 20 }
+
+reportsL2IfaceIfOutDiscards OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of outbound packets that were chosen
+to be discarded even if no errors that prevented their
+transmission had been detected. One
+possible reason for discarding such a packet could
+be to free up buffer space."
+::= { reportsL2IfaceEntry 21 }
+
+reportsL2IfaceIfOutErrors OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The number of outbound packets that could not be
+transmitted because of errors."
+::= { reportsL2IfaceEntry 22 }
+
+reportsL2IfaceStatsDropEvents OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of events in which packets
+were dropped by the probe due to lack of resources.
+Note that this number is not necessarily the number of
+packets dropped; it is just the number of times this
+condition has been detected."
+::= { reportsL2IfaceEntry 23 }
+
+reportsL2IfaceStatsOctets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of octets of data (including
+those in bad packets) received on the
+network (excluding framing bits but including
+FCS octets).
+
+This object can be used as a reasonable estimate of
+Ethernet utilization. If greater precision is
+desired, the etherStatsPkts and etherStatsOctets
+objects should be sampled before and after a common
+interval. The differences in the sampled values are
+Pkts and Octets, respectively, and the number of
+seconds in the interval is Interval. These values
+are used to calculate the Utilization as follows:
+
+Pkts * (9.6 + 6.4) + (Octets * .8)
+Utilization = -------------------------------------
+Interval * 10,000
+
+The result of this equation is the Ethernet segment utilization
+which is the percent utilization of the ethernet
+segment on a 0 to 100 percent scale."
+::= { reportsL2IfaceEntry 24 }
+
+reportsL2IfaceStatsPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad packets,
+broadcast packets, and multicast packets) received."
+::= { reportsL2IfaceEntry 25 }
+
+reportsL2IfaceStatsBroadcastPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of good packets received that were
+directed to the broadcast address. Note that this
+does not include multicast packets."
+::= { reportsL2IfaceEntry 26 }
+
+reportsL2IfaceStatsMulticastPkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of good packets received that were
+directed to a multicast address. Note that this
+number does not include packets directed to the
+broadcast address."
+::= { reportsL2IfaceEntry 27 }
+
+reportsL2IfaceStatsCRCAlignErrors OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that
+had a length (excluding framing bits, but
+including FCS octets) of between 64 and 1518
+octets, inclusive, but had either a bad
+Frame Check Sequence (FCS) with an integral
+number of octets (FCS Error) or a bad FCS with
+a non-integral number of octets (Alignment Error)."
+::= { reportsL2IfaceEntry 28 }
+
+reportsL2IfaceStatsUndersizePkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that were
+less than 64 octets long (excluding framing bits,
+but including FCS octets) and were otherwise well
+formed."
+::= { reportsL2IfaceEntry 29 }
+
+reportsL2IfaceStatsOversizePkts OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that were
+longer than 1518 octets (excluding framing bits,
+but including FCS octets) and were otherwise
+well formed."
+::= { reportsL2IfaceEntry 30 }
+
+reportsL2IfaceStatsFragments OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that were less
+than 64 octets in length (excluding framing bits but
+including FCS octets) and had either a bad Frame
+Check Sequence (FCS) with an integral number of
+octets (FCS Error) or a bad FCS with a non-integral
+number of octets (Alignment Error).
+
+Note that it is entirely normal for
+etherStatsFragments to increment. This is because
+it counts both runts (which are normal occurrences
+due to collisions) and noise hits."
+::= { reportsL2IfaceEntry 31 }
+
+reportsL2IfaceStatsJabbers OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets received that were
+longer than 1518 octets (excluding framing bits,
+but including FCS octets), and had either a bad
+Frame Check Sequence (FCS) with an integral number
+of octets (FCS Error) or a bad FCS with a
+non-integral number of octets (Alignment Error).
+
+Note that this definition of jabber is different
+from the definition in IEEE-802.3 section 8.2.1.5
+(10BASE5) and section 10.3.1.4 (10BASE2). These
+documents define jabber as the condition in which any
+packet exceeds 20 ms. The allowed range to detect
+jabber is between 20 ms and 150 ms."
+::= { reportsL2IfaceEntry 32 }
+
+reportsL2IfaceStatsCollisions OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The best estimate of the total number of collisions
+on this Ethernet segment.
+
+The value returned will depend on the RMON probe's location.
+Sections 8.2.1.3 (10BASE-5) and 10.3.1.3 (10BASE-2) of
+IEEE standard 802.3 states that a station must detect a collision in
+the receive mode if three or more stations are
+transmitting simultaneously. A repeater port must
+detect a collision when two or more stations are
+transmitting simultaneously. Thus a probe placed on
+a repeater port could record more collisions than a
+probe connected to a station on the same segment
+would.
+
+Probe location plays a much smaller role when
+considering 10BASE-T. Section 14.2.1.4 (10BASE-T) of IEEE
+standard 802.3 defines a collision as the
+simultaneous presence of signals on the DO and RD
+circuits (transmitting and receiving at the same
+time). A 10BASE-T station can only detect
+collisions when it is transmitting. Thus probes
+placed on a station and a repeater, should report
+the same number of collisions.
+
+Note also that an RMON probe inside a repeater
+should ideally report collisions between the
+repeater and one or more other hosts (transmit
+collisions as defined by IEEE 802.3k) plus receiver
+collisions observed on any coaxial segments to which
+the repeater is connected."
+::= { reportsL2IfaceEntry 33 }
+
+reportsL2IfaceStatsPkts64Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were 64 octets in length
+(excluding framing bits but including FCS octets)."
+::= { reportsL2IfaceEntry 34 }
+
+reportsL2IfaceStatsPkts65to127Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+65 and 127 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { reportsL2IfaceEntry 35 }
+
+reportsL2IfaceStatsPkts128to255Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+128 and 255 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { reportsL2IfaceEntry 36 }
+
+reportsL2IfaceStatsPkts256to511Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+256 and 511 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { reportsL2IfaceEntry 37 }
+
+reportsL2IfaceStatsPkts512to1023Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+512 and 1023 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { reportsL2IfaceEntry 38 }
+
+reportsL2IfaceStatsPkts1024to1518Octets OBJECT-TYPE
+SYNTAX Counter32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The total number of packets (including bad
+packets) received that were between
+1024 and 1518 octets in length inclusive
+(excluding framing bits but including FCS octets)."
+::= { reportsL2IfaceEntry 39 }
+
+reportsL2IfaceFlow OBJECT-TYPE
+SYNTAX INTEGER {
+unknown(1),
+flowon(2),
+flowoff(3)
+}
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The flow control for the interface."
+::= { reportsL2IfaceEntry 40 }
+
+reportsL2IfaceHWType OBJECT-TYPE
+SYNTAX ModuleHwType
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The HW type of the interface."
+::= { reportsL2IfaceEntry 41 }
+
+reportsL2IfaceActiveJackIndex OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The current active jack index."
+::= { reportsL2IfaceEntry 42 }
+
+reportsHardware OBJECT IDENTIFIER ::= { reports 2 }
+--
+-- Hardware Group
+--
+--
+-- This group provides general hardware information not from other MIBs.
+--
+
+reportsHardwarePSStatus OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (1..16))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Each OCTET holds the status of 1 power supply or if supported,
+a status of its corresponding power supply fan. Every octet can
+show one of the following states:
+0 - power supply not installed;
+1 - power supply is installed but does not function correctly;
+2 - power supply is installed and working OK;
+There are devices, which can also show status of the Fan,
+attached to the power supply. All devices which support the Power
+Supply fan, will display their status in series of octet pairs.
+The fan status octet will be displayed right after the supply
+status octet. "
+::= { reportsHardware 1 }
+
+reportsHardwareFanStatus OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (1..16))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Each OCTET holds the status of 1 fan
+0 - Fan stopped
+1 - Fan failed
+2 - Fan OK"
+::= { reportsHardware 2 }
+
+reportsHardwareTemperature OBJECT-TYPE
+SYNTAX INTEGER
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The internal temperature of the unit in degrees Celsius."
+::= { reportsHardware 3 }
+
+reportsHardwarePSVoltage OBJECT-TYPE
+SYNTAX OCTET STRING (SIZE (1..16))
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Each OCTET holds the voltage of a corresponding power supply. Every octet can
+show one of the following states:
+0 - power supply not installed or voltage information is not supported;
+1-C - power supply in V, hexadecimal;"
+::= { reportsHardware 4 }
+
+reportsHardwareTemperatureScale OBJECT-TYPE
+SYNTAX INTEGER { celsius(1),
+fahrenheit(2)
+}
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Displays the scale used - Celsius (Centigrade) or Fahrenheit when measuring CPU temperature. The value of this object determines the type of scale used for the values of reportsHardwareTemperature and reportsHardwareTemperatureHighLimit objects."
+DEFVAL { celsius }
+::= { reportsHardware 5 }
+
+reportsHardwareTemperatureHighLimit OBJECT-TYPE
+SYNTAX INTEGER (20..70)
+MAX-ACCESS read-write
+STATUS current
+DESCRIPTION
+"Displays the highest allowed Celsius (Centigrade) or Fahrenheit temperature at the unit CPU area. When this limit is reached an SNMP notification is sent."
+DEFVAL { 55 }
+-- Default value in Celsius is 55, or 131 in Fahrenheit; Allowed range is <20-70> for Celsius, <68-158> in Fahrenheit
+::= { reportsHardware 6 }
+
+reportsHardwareDoorStatus OBJECT-TYPE
+SYNTAX INTEGER (0..2)
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"Status of door
+0 - Door not installed
+1 - Door open
+2 - Door closed"
+::= { reportsHardware 7 }
+
+reportsIfJack OBJECT IDENTIFIER ::= { reports 3 }
+--
+-- Hardware Group
+--
+--
+-- This group provides general hardware information not from other MIBs.
+--
+
+reportsIfJackTable OBJECT-TYPE
+SYNTAX SEQUENCE OF ReportsIfJackEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"Information about the external jacks attached to
+MAUs attached to an interface."
+::= { reportsIfJack 2 }
+
+reportsIfJackEntry OBJECT-TYPE
+SYNTAX ReportsIfJackEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"An entry in the table, containing information
+about a particular jack."
+INDEX { reportsL2IfaceUnit,reportsL2IfaceSlot,
+reportsL2IfacePort,reportsIfJackIndex }
+::= { reportsIfJackTable 1 }
+
+ReportsIfJackEntry ::=
+SEQUENCE {
+reportsIfJackIndex Integer32,
+reportsIfJackType ModuleHwType
+}
+
+reportsIfJackIndex OBJECT-TYPE
+SYNTAX Integer32 (1..2147483647)
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+"This variable uniquely identifies the jack
+described by this entry from among other jacks
+attached to the same MAU."
+::= { reportsIfJackEntry 1 }
+
+reportsIfJackType OBJECT-TYPE
+SYNTAX ModuleHwType
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+"The jack connector type, as it appears on the
+outer side of the system."
+::= { reportsIfJackEntry 2 }
+
+-- Notifications for use by prvtSwitchMib
+
+cpuTemperatureExceeded NOTIFICATION-TYPE
+OBJECTS { reportsHardwareTemperature }
+STATUS current
+DESCRIPTION
+"The cpuTemperatuteExceeded trap indicates that the sending
+agent senses that the internal temperature has passed the
+program threshold."
+::= {prvtSwitchNotifications 1}
+
+powerSupplyStatusChange NOTIFICATION-TYPE
+OBJECTS { reportsHardwarePSStatus }
+STATUS current
+DESCRIPTION
+"The powerSupplyStatusChange trap indicates that the sending
+agent senses a change in the status of one of the power supplies."
+::= {prvtSwitchNotifications 2}
+
+fanStatusChange NOTIFICATION-TYPE
+OBJECTS { reportsHardwareFanStatus }
+STATUS current
+DESCRIPTION
+"The fanStatusChange trap indicates that the sending
+agent senses a change in the status of one of the fans."
+::= {prvtSwitchNotifications 3}
+
+portSecurityViolation NOTIFICATION-TYPE
+OBJECTS { ifIndex }
+STATUS current
+DESCRIPTION
+"The port security violation notification indicates that a port security violation has been detected, e.g more MAC adresses have been learned on that port than the number allowed."
+::= { prvtSwitchNotifications 4}
+
+portRedundantLinkChange NOTIFICATION-TYPE
+OBJECTS { ifAdminStatus, ifOperStatus, reportsL2IfaceLink }
+STATUS current
+DESCRIPTION
+"The port redundant link change notification indicates that the physical state of a redundant (i.e.
+blocked or discarding) link has changed from link-up
+to link down or vice versa."
+::= { prvtSwitchNotifications 5}
+
+sysIntfModuleChange NOTIFICATION-TYPE
+OBJECTS { sysIntfModule}
+STATUS current
+DESCRIPTION
+"The System Interface Module change notification indicates
+that the physical status of a module in the
+unit has changed."
+::= { prvtSwitchNotifications 6}
+
+prvtLogNotifyFull NOTIFICATION-TYPE
+-- OBJECTS { }
+STATUS current
+DESCRIPTION
+"Log buffer is almost full."
+::= { prvtSwitchNotifications 7}
+
+doorStatusChange NOTIFICATION-TYPE
+OBJECTS { reportsHardwareDoorStatus }
+STATUS current
+DESCRIPTION
+"The doorStatusChange trap indicates that the sending
+agent senses a change in the status of the door."
+::= {prvtSwitchNotifications 8}
+
+-- *******************************************************************
+-- Conformance Information
+-- *******************************************************************
+
+prvtSwitchMIBGroups OBJECT IDENTIFIER ::= { prvtSwitchConformance 2 }
+
+prvtSwitchNotificationGroup NOTIFICATION-GROUP
+NOTIFICATIONS {
+cpuTemperatureExceeded,
+powerSupplyStatusChange,
+fanStatusChange,
+portSecurityViolation,
+portRedundantLinkChange,
+sysIntfModuleChange,
+doorStatusChange
+}
+STATUS current
+DESCRIPTION
+"Private Notification Group."
+::= { prvtSwitchMIBGroups 3 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-SYS-INFO-MIB b/MIBS/telco-systems/binos/PRVT-SYS-INFO-MIB
new file mode 100644
index 0000000..cc371a7
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SYS-INFO-MIB
@@ -0,0 +1,389 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   PRVT-SYS-INFO-MIB.mib
+-- *********************************************************************
+-- (c) Copyright, 2003, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+PRVT-SYS-INFO-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32
+                                             FROM SNMPv2-SMI
+        DisplayString                        FROM SNMPv2-TC
+               NOTIFICATION-TYPE
+          FROM SNMPv2-SMI       
+              
+      MODULE-COMPLIANCE, NOTIFICATION-GROUP,
+OBJECT-GROUP
+FROM SNMPv2-CONF
+
+   ipSwitch, prvt-products
+	                                     FROM PRVT-SWITCH-MIB;  
+-------------------------------------------------------------------------------
+--     PRIVATE BRANCH  PRODUCTS
+-------------------------------------------------------------------------------
+
+    prvtSysInfMib MODULE-IDENTITY
+        LAST-UPDATED    "200801010000Z"
+        ORGANIZATION "BATM Advanced Communication"
+        CONTACT-INFO
+               "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+        DESCRIPTION
+                "Information for system resources"
+		
+        -- revision history     
+         REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions."   
+         REVISION     "200510050000Z"
+     	 DESCRIPTION
+		"Added new value task-pend(5) for taskStatus." 
+    
+         REVISION     "200502160000Z"
+     	 DESCRIPTION
+		"Fixed spelling errors and changed the contact info." 
+
+        REVISION     "200312090000Z"
+        DESCRIPTION
+                "Add new notification taskSuspended."
+        REVISION     "200305130000Z"
+        DESCRIPTION
+                "Initial version."
+            ::= { software 2 }
+    software        OBJECT IDENTIFIER ::= { prvt-products 111 }
+
+    prvtSysInfNotifications OBJECT IDENTIFIER ::= { prvtSysInfMib 0 }
+    prvtSysInfObjects       OBJECT IDENTIFIER ::= { prvtSysInfMib 1 }
+    prvtSysInfConformance    OBJECT IDENTIFIER ::= { prvtSysInfMib 2 }
+
+    sysMemory OBJECT IDENTIFIER ::= {prvtSysInfObjects 1}
+    sysTask OBJECT IDENTIFIER   ::= { prvtSysInfObjects 2 }
+
+--      Memory Group
+
+--      This group provides the memory usage information of device.
+
+
+    numBytesFree            OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " The number of bytes free in the system memory "
+        ::= { sysMemory 1 }
+
+    numBlocksFree           OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " The number of blocks free in the system memory "
+        ::= { sysMemory 2 }
+
+    avgBlockSizeFree        OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " The average block size that is free in the system memory "
+        ::= { sysMemory 3 }
+
+    maxBlockSizeFree        OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " The largest block size that is free in the memory "
+        ::= { sysMemory 4 }
+
+    numBytesAlloc           OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " The number of bytes of system memory that have been allocated by
+                  tasks and system services "
+        ::= { sysMemory 5 }
+
+    numBlocksAlloc          OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " The number of blocks of system memory that have been allocated in
+                  the system "
+        ::= { sysMemory 6 }
+
+    avgBlockSizeAlloc       OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " The average memory block size that has been allocated in the
+                system "
+        ::= { sysMemory 7 }
+
+
+
+--      Task Group
+
+--      This group provides access to the target's task table.
+--      Tasks can be suspended, created, resumed and deleted.
+
+
+
+    taskTable               OBJECT-TYPE
+        SYNTAX          SEQUENCE OF TaskEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                "Represents the OS task table. Each entry in this table
+                 represents a task"
+        ::= { sysTask 1 }
+
+    taskEntry               OBJECT-TYPE
+        SYNTAX          TaskEntry
+        MAX-ACCESS      not-accessible
+        STATUS          current
+        DESCRIPTION
+                " Each entry contains information with regards to a task in the
+                system "
+        INDEX           { taskId }
+        ::= { taskTable 1 }
+
+    TaskEntry ::=
+        SEQUENCE {
+                taskId
+                        Integer32,
+                taskName
+                        DisplayString,
+                taskPriority
+                        Integer32,
+                taskStatus
+                        INTEGER,
+                taskOptions
+                        BITS,
+                taskMain
+                        DisplayString,
+                taskStackPtr
+                        Unsigned32,
+                taskStackBase
+                        Unsigned32,
+                taskStackPos
+                        Unsigned32,
+                taskStackEnd
+                        Unsigned32,
+                taskStackSize
+                        Unsigned32,
+                taskStackSizeUsage
+                        Unsigned32,
+                taskStackMaxUsed
+                        Unsigned32,
+                taskStackFree
+                        Unsigned32,
+                taskErrorStatus
+                        Integer32
+        }
+
+    taskId                  OBJECT-TYPE
+        SYNTAX          Integer32(1..2147483647)
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " This is the task ID assigned by OS to a task in the
+                  system."
+        ::= { taskEntry 1 }
+
+    taskName                OBJECT-TYPE
+        SYNTAX          DisplayString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                " This is the name of the task."
+        ::= { taskEntry 2 }
+
+    taskPriority            OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The priority of the task.  This value can be
+                 in the range from 0, the highest priority,
+                 to 255, the lowest priority."
+        ::= { taskEntry 3 }
+
+    taskStatus              OBJECT-TYPE
+        SYNTAX          INTEGER {
+                                task-ready(1),      -- Task is ready to run.
+                                task-suspended(2),  -- Task is suspended.
+                                task-delay(3),      -- Task is delayed.
+                                task-deleted(4),    -- Task is to be deleted.       
+                                task-pend(5)        -- Task is pended on a semaphore
+                        }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This field specifies the current task status."
+        ::= { taskEntry 4 }
+
+    taskOptions             OBJECT-TYPE
+        SYNTAX      BITS {
+           task-supervisor-mode(0),
+           task-unbreakable(1),
+           task-dealloc-stack(2),
+           task-fp-task(3),
+           task-stdio(4),
+           task-reserved-1(5),
+           task-reserved-2(6),
+           task-private-env(7),
+           task-no-stack-fill(8)
+       }
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The option is toggled based on the current setting."
+        ::= { taskEntry 5 }
+
+    taskMain                OBJECT-TYPE
+        SYNTAX          DisplayString
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the name of the entry function for the task."
+        ::= { taskEntry 6 }
+
+    taskStackPtr            OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the saved stack pointer for the task."
+        ::= { taskEntry 7 }
+
+
+    taskStackBase           OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the address of the bottom of the stack for the task."
+        ::= { taskEntry 8 }
+
+    taskStackPos            OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the effective top of the stack in the current task state."
+        ::= { taskEntry 9 }
+
+    taskStackEnd            OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the address of the top of the stack for the task."
+        ::= { taskEntry 10 }
+
+    taskStackSize           OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the actual size of the stack in bytes."
+        ::= { taskEntry 11 }
+
+    taskStackSizeUsage      OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "The number of bytes currently in use by the task from the stack."
+        ::= { taskEntry 12 }
+
+    taskStackMaxUsed        OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the maximum number of bytes that have been used by the task 
+                from the stack."
+        ::= { taskEntry 13 }
+
+    taskStackFree           OBJECT-TYPE
+        SYNTAX          Unsigned32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the number of bytes that are free currently in the task stack."
+        ::= { taskEntry 14 }
+
+    taskErrorStatus         OBJECT-TYPE
+        SYNTAX          Integer32
+        MAX-ACCESS      read-only
+        STATUS          current
+        DESCRIPTION
+                "This is the most recent error status for this task."
+        ::= { taskEntry 15 }
+     
+     -- Notifications for use by prvtSysInfMib
+
+     taskSuspended NOTIFICATION-TYPE
+         OBJECTS { taskName, taskId}
+         STATUS  current
+         DESCRIPTION
+			"The taskSuspended notification indicates that the sending
+			 agent senses that a task has been suspended."
+	     ::= {prvtSysInfNotifications 1}
+
+-- *******************************************************************
+--  Conformance Information
+-- *******************************************************************
+
+    sysInfMIBGroups       OBJECT IDENTIFIER ::= { prvtSysInfConformance 2 }
+
+
+    sysInfNotificationGroup NOTIFICATION-GROUP
+    	NOTIFICATIONS {
+    		taskSuspended
+    	}
+	STATUS current
+     	DESCRIPTION
+        	"Private system info Notification Group"
+     ::= { sysInfMIBGroups 3 }
+END
diff --git a/MIBS/telco-systems/binos/PRVT-SYS-MON-MIB b/MIBS/telco-systems/binos/PRVT-SYS-MON-MIB
new file mode 100644
index 0000000..31e5953
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-SYS-MON-MIB
@@ -0,0 +1,699 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SYS-MON-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+
+PRVT-SYS-MON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+	MODULE-IDENTITY, OBJECT-TYPE, 
+		Integer32 ,NOTIFICATION-TYPE
+          FROM SNMPv2-SMI       
+              
+      NOTIFICATION-GROUP
+FROM SNMPv2-CONF
+   TEXTUAL-CONVENTION
+        FROM SNMPv2-TC                                           
+		DisplayString    
+			FROM SNMPv2-TC
+		reportsL2IfaceUnit, reportsL2IfaceSlot,
+		reportsL2IfacePort, reportsIfJackIndex,
+		prvt-products
+	                                     FROM PRVT-SWITCH-MIB;  
+
+
+    prvtSysMonMib MODULE-IDENTITY
+  LAST-UPDATED    "200712270000Z"
+        ORGANIZATION "BATM Advanced Communication"
+        CONTACT-INFO
+        " BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"
+       
+        DESCRIPTION
+                "Information for system resources"
+
+	REVISION 			"200712270000Z"
+	DESCRIPTION 
+	"Added laser management"
+         REVISION     "200502160000Z"
+     	 DESCRIPTION
+			"Fixed spelling errors and changed the contact info." 
+
+        REVISION     "200311180000Z"
+        DESCRIPTION
+	"Add new notifications portsCRCErrExceeded, portsRuntsExceeded, 
+	portsOverSizeExceeded and support vars for them.
+	Change the MAX-ACCESS for all 
+	sysMonValues to accessible-for-notify"
+        REVISION     "200305130000Z"
+        DESCRIPTION
+                "Initial version."
+            ::= { software 3 }
+
+
+
+-------------------------------------------------------------------------------
+--     PRIVATE BRANCH  PRODUCTS
+-------------------------------------------------------------------------------
+    software        OBJECT IDENTIFIER ::= { prvt-products 111 }
+
+----------------------------------------------------------------------------
+-- Variable Type definitions
+----------------------------------------------------------------------------
+	EnableStatus ::= TEXTUAL-CONVENTION
+	STATUS       current
+	DESCRIPTION
+	"enable(1), disable(2)"
+	SYNTAX  INTEGER {
+		enable(1),
+		disable(2)
+	}
+
+    prvtSysMonNotifications OBJECT IDENTIFIER ::= { prvtSysMonMib 0 }
+    prvtSysMonObjects       OBJECT IDENTIFIER ::= { prvtSysMonMib 1 }
+    prvtSysMonConformance   OBJECT IDENTIFIER ::= { prvtSysMonMib 2 }
+
+    sysMonThreshold  OBJECT IDENTIFIER ::= {prvtSysMonObjects 1}
+    sysMonValues     OBJECT IDENTIFIER ::= {prvtSysMonObjects 2}
+	sysMonConfig		 OBJECT IDENTIFIER ::= {prvtSysMonObjects 3}
+
+    cpuUtilizationThreshold OBJECT-TYPE
+        SYNTAX              Integer32
+        MAX-ACCESS          read-only
+        STATUS              current
+        DESCRIPTION
+                "High limit in percent of normal CPU utilization"
+        ::= { sysMonThreshold 1 }
+
+    ramBytesFreeThreshold OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+                "Low limit in bytes free in the system memory"
+        ::= { sysMonThreshold 2 }
+
+    portErrorsThreshold OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+                "High limit in percent of communication errors on port"
+        ::= { sysMonThreshold 3 }
+
+    portsBroadcastThreshold OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+                "High limit in percent of exceeding broadcast-limit on port"
+        ::= { sysMonThreshold 4 }
+
+    portsCRCErrThreshold OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+                "High limit in percent of exceeding CRC error on port"
+        ::= { sysMonThreshold  5 }
+
+    portsRuntsThreshold OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+                "High limit in percent of exceeding runts on port"
+        ::= { sysMonThreshold 6 }
+
+    portsOverSizeThreshold OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        read-only
+        STATUS            current
+        DESCRIPTION
+                "High limit in percent of exceeding over-size on port"
+        ::= { sysMonThreshold 7 }
+
+	laserPortThresholdTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF LaserPortThresholdEntry
+	MAX-ACCESS	not-accessible
+	STATUS			current
+	DESCRIPTION
+	"Defines thresholds for each port in the device"
+	::= { sysMonThreshold 8 }
+
+	laserPortThresholdEntry OBJECT-TYPE
+	SYNTAX LaserPortThresholdEntry
+	MAX-ACCESS	not-accessible
+	STATUS			current
+	DESCRIPTION
+	""
+	INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot,	reportsL2IfacePort, reportsIfJackIndex}
+	::= { laserPortThresholdTable 1 }
+
+	LaserPortThresholdEntry ::= SEQUENCE {
+		laserTemperatureHighThreshold		Integer32,
+		laserTemperatureLowThreshold   	Integer32,
+		laserTxPowerHighThreshold      	Integer32,
+		laserTxPowerLowThreshold       	Integer32,
+		laserRxPowerHighThreshold    		Integer32,
+		laserRxPowerLowThreshold				Integer32
+	}
+
+	laserTemperatureHighThreshold OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-write
+	STATUS     current
+	DESCRIPTION
+	"Configures high temperature threshold. The range is -128 to 128. The accuracy is 1C."
+	::= { laserPortThresholdEntry 1  }
+
+	laserTemperatureLowThreshold OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-write
+	STATUS     current
+	DESCRIPTION
+	"Configures low temperature threshold. The range is -128 to 128. The accuracy is 1C."
+	::= { laserPortThresholdEntry 2  }
+
+	laserTxPowerHighThreshold OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-write
+	STATUS     current
+	DESCRIPTION
+	"Configures Tx power high threshold. The range is -40 to 8."
+	::= { laserPortThresholdEntry 3  }
+
+	laserTxPowerLowThreshold OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-write
+	STATUS     current
+	DESCRIPTION
+	"Configures Tx power low threshold. The range is -40 to 8."
+	::= { laserPortThresholdEntry 4  }
+
+	laserRxPowerHighThreshold OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-write
+	STATUS     current
+	DESCRIPTION
+	"Configures Rx power high threshold. The range is -40 to 8."
+	::= { laserPortThresholdEntry 5  }
+
+	laserRxPowerLowThreshold OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-write
+	STATUS     current
+	DESCRIPTION
+	"Configures Rx power low threshold. The range is -40 to 8."
+	::= { laserPortThresholdEntry 6  }
+
+    monCpuUtilization  OBJECT-TYPE
+        SYNTAX      Integer32
+        MAX-ACCESS  read-only
+        STATUS      current
+        DESCRIPTION
+                "The current level in percent of CPU utilization"
+        ::= { sysMonValues 1 }
+
+    monRamBytesFree   OBJECT-TYPE
+        SYNTAX     Integer32
+        MAX-ACCESS accessible-for-notify
+        STATUS     current
+        DESCRIPTION
+                "The number of bytes currently free in the system memory"
+        ::= { sysMonValues 2 }
+
+    monPortsTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF MonPortsEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+            "Defines the ports monitor Table for providing, via SNMP, the
+             last sampled parameters by the periodic monitor"
+	::= { sysMonValues 3 }
+
+    monPortsEntry OBJECT-TYPE
+        SYNTAX MonPortsEntry
+        MAX-ACCESS not-accessible
+        STATUS current
+        DESCRIPTION
+           "Defines an entry in the monPortsTable. The entries are indexed by
+            the physical location of the port in the device."
+        INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot, reportsL2IfacePort }
+        ::= { monPortsTable 1 }
+
+    MonPortsEntry ::= SEQUENCE {
+        monPortErrors      Integer32,
+        monPortBroadcast   Integer32,
+        monPortCRCErr      Integer32,
+        monPortRunts       Integer32,
+        monPortOverSize    Integer32
+    }
+
+   monPortErrors      OBJECT-TYPE
+        SYNTAX     Integer32
+        MAX-ACCESS accessible-for-notify
+        STATUS     current
+        DESCRIPTION
+                "The percentages of errors on the port that generated the notification."
+        ::= { monPortsEntry 1  }
+
+   monPortBroadcast  OBJECT-TYPE
+        SYNTAX     Integer32
+        MAX-ACCESS accessible-for-notify
+        STATUS     current
+        DESCRIPTION
+                "The percentages of packets exceeding broadcast-limit on the port that generated the notification."
+        ::= { monPortsEntry 2  }
+
+   monPortCRCErr OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        accessible-for-notify
+        STATUS            current
+        DESCRIPTION
+                "The percentage of CRC errors on the port that generated the notification."
+        ::= { monPortsEntry  3 }
+
+   monPortRunts OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        accessible-for-notify
+        STATUS            current
+        DESCRIPTION
+                "The percentage of runt packets on the port that generated the notification."
+        ::= { monPortsEntry 4 }
+
+   monPortOverSize OBJECT-TYPE
+        SYNTAX            Integer32
+        MAX-ACCESS        accessible-for-notify
+        STATUS            current
+        DESCRIPTION
+                "The percentage of over-size packets on the port that generated the notification."
+        ::= { monPortsEntry 5 }
+
+	laserPortValueTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF LaserPortValueEntry
+	MAX-ACCESS 	not-accessible
+	STATUS 			current
+	DESCRIPTION
+	"This table displays the current laser-related values for each port in the device."
+	::= { sysMonValues 4 }
+
+	laserPortValueEntry OBJECT-TYPE
+	SYNTAX LaserPortValueEntry
+	MAX-ACCESS 	not-accessible
+	STATUS 			current
+	DESCRIPTION
+	""
+	INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot, reportsL2IfacePort, reportsIfJackIndex }
+	::= { laserPortValueTable 1 }
+
+	LaserPortValueEntry ::= SEQUENCE {
+		sfpStatus      		INTEGER,
+		laserTemperature  Integer32,
+		laserTxPower      Integer32,
+		laserRxPower      Integer32
+	}
+
+	sfpStatus      OBJECT-TYPE
+	SYNTAX     INTEGER {
+		lm-supported(1),
+		lm-not-supported(2),
+		extracted(3)
+	}
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+	"If value of this field is not supported, then 
+	the values of other fields are not relevant. 
+	The value is supported only if SFP compliant 
+	with SFF-8472 is inserted."
+	::= { laserPortValueEntry 1 }
+
+	laserTemperature      OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+	"Represents module temperature.
+	The range is -128 to 128. The accuracy is 1C."
+	::= { laserPortValueEntry 2 }
+
+	laserTxPower OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+	"Represents Tx power. The range is -40 to 8."
+	::= { laserPortValueEntry 3 }
+
+	laserRxPower OBJECT-TYPE
+	SYNTAX     Integer32
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+	"Represents Rx power. The range is -40 to 8."
+	::= { laserPortValueEntry 4 }
+
+     cpuUtilizationExceeded NOTIFICATION-TYPE
+         OBJECTS { monCpuUtilization, cpuUtilizationThreshold}
+         STATUS  current
+         DESCRIPTION
+			"The cpuUtilizationExceeded notification indicates that the sending
+			 agent sense that the CPU utilization has passed the
+			 program threshold."
+	     ::= {prvtSysMonNotifications 1}
+
+     ramFreeSpaceExceeded NOTIFICATION-TYPE
+         OBJECTS { monRamBytesFree, ramBytesFreeThreshold}
+         STATUS  current
+         DESCRIPTION
+            "The ramFreeSpaceExceeded notification indicates that the sending
+             agent sense that the system memory utilization has passed the
+             program threshold."
+	::= {prvtSysMonNotifications 2}
+
+     portErrorsExceeded NOTIFICATION-TYPE
+         OBJECTS { monPortErrors, portErrorsThreshold}
+         STATUS  current
+         DESCRIPTION
+            "The portErrorsExceeded notification indicates that the sending
+             agent sense that the level of errors on the port
+             has passed the program threshold."
+	::= {prvtSysMonNotifications 3}
+
+     portsBroadcastExceeded NOTIFICATION-TYPE
+         OBJECTS { monPortBroadcast, portsBroadcastThreshold}
+         STATUS  current
+         DESCRIPTION
+            "The portsBroadcastExceeded notification indicates that the sending
+             agent sense that the level of broadcast-limit has passed the
+             program threshold."
+	::= {prvtSysMonNotifications 4}
+
+     portsCRCErrExceeded NOTIFICATION-TYPE
+         OBJECTS { monPortCRCErr, portsCRCErrThreshold}
+         STATUS  current
+         DESCRIPTION
+            "The portsCRCErrExceeded notification indicates that the sending
+             agent sense that the level of CRC error has passed the
+             program threshold."
+	::= {prvtSysMonNotifications 5}
+
+     portsRuntsExceeded NOTIFICATION-TYPE
+         OBJECTS { monPortRunts, portsRuntsThreshold}
+         STATUS  current
+         DESCRIPTION
+	   "The portsRuntsExceeded notification indicates that the sending
+            agent sense that the level of runts has passed the
+            program threshold."
+	 ::= {prvtSysMonNotifications 6}
+
+     portsOverSizeExceeded NOTIFICATION-TYPE
+         OBJECTS { monPortOverSize, portsOverSizeThreshold}
+         STATUS  current
+         DESCRIPTION
+	   "The portsOverSizeExceeded notification indicates that the sending
+            agent sense that the level of oversize has passed the
+            program threshold."
+     ::= {prvtSysMonNotifications 7}
+
+	laserTemperatureThresholdCrossed NOTIFICATION-TYPE
+				OBJECTS { laserTemperature, laserTemperatureHighThreshold, laserTemperatureLowThreshold }
+				STATUS  current
+			DESCRIPTION
+					"The laserTemperatureThresholdCrossed shall be generated 
+					when laserTemperature rises above laserHighTemperatureThreshold 
+					or falls below laserTemperatureLowThreshold. Also the 
+					notification shall be generated when laserTemperature
+				 	returns to the normal range between laserHighTemperatureThreshold 
+					and laserTemperatureLowThreshold."
+					::= { prvtSysMonNotifications 8 }
+
+				laserTxPowerThresholdCrossed NOTIFICATION-TYPE
+				OBJECTS { laserTxPower, laserTxPowerHighThreshold, laserTxPowerLowThreshold }
+				STATUS  current
+				DESCRIPTION
+							"The laserTxPowerThresholdCrossed shall be generated
+							when laserTxPower rises above laserHighTxPowerThreshold
+							or falls below laserTxPowerLowThreshold. Also the 
+							notification shall be generated when laserTxPower 
+							returns to the normal range between 
+							laserHighTxPowerThreshold and laserTxPowerLowThreshold."
+				::= { prvtSysMonNotifications 9 }
+  			
+				laserRxPowerThresholdCrossed NOTIFICATION-TYPE
+				OBJECTS { laserRxPower, laserRxPowerHighThreshold, laserRxPowerLowThreshold }
+				STATUS  current
+				DESCRIPTION
+							"The laserRxPowerThresholdCrossed shall be generated 
+							when laserRxPower rises above laserHighRxPowerThreshold 
+							or falls below laserRxPowerLowThreshold. Also the 
+							notification shall be generated when laserRxPower 
+							returns to the normal range between 
+							laserHighRxPowerThreshold and laserRxPowerLowThreshold."
+				::= { prvtSysMonNotifications 10 }
+			sfpMonStatusChanged NOTIFICATION-TYPE
+				OBJECTS { sfpMonStatus }
+				STATUS  current
+				DESCRIPTION 
+				"This trap will be send only if the SFP is inserted or extracted"							
+				::= { prvtSysMonNotifications 11 }
+sfpPortManTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF SfpPortManEntry
+	MAX-ACCESS 	not-accessible
+	STATUS 			current
+	DESCRIPTION
+	"This table  will be responsible for managing SFPs."
+	::= { sysMonValues 5 }
+
+	sfpPortManEntry OBJECT-TYPE
+	SYNTAX SfpPortManEntry
+	MAX-ACCESS 	not-accessible
+	STATUS 			current
+	DESCRIPTION
+	""
+	INDEX { reportsL2IfaceUnit, reportsL2IfaceSlot, reportsL2IfacePort, reportsIfJackIndex }
+	::= { sfpPortManTable 1 }
+
+	  SfpPortManEntry ::= SEQUENCE {
+		sfpMonStatus      		INTEGER,
+		sfpVendor				DisplayString,
+		sfpPN      				DisplayString,
+		sfpRevision       DisplayString,
+		sfpLenght					DisplayString,
+		sfpConnector			DisplayString
+	}
+
+	sfpMonStatus      OBJECT-TYPE
+	SYNTAX     INTEGER {
+		sfpInserted (1),
+		sfpExtracted (2),
+		sfpUnknown    (3)		
+	}
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+	"This object gives information is SFP is inserted or not in the port."
+	::= { sfpPortManEntry 1 }
+	
+	sfpVendor      OBJECT-TYPE
+	SYNTAX          DisplayString (SIZE(0..9))
+  MAX-ACCESS      read-only
+  STATUS          current
+  DESCRIPTION     "This object gives SFP vendor name."
+  DEFVAL          { ''H }
+    ::= { sfpPortManEntry 2 }
+    
+  sfpPN      OBJECT-TYPE
+	SYNTAX          DisplayString (SIZE(0..9))
+  MAX-ACCESS      read-only
+  STATUS          current
+  DESCRIPTION     "This object gives SFP vendor name."
+  DEFVAL          { ''H }
+    ::= { sfpPortManEntry 3 }
+    
+  sfpRevision      OBJECT-TYPE
+	SYNTAX          DisplayString (SIZE(0..9))
+  MAX-ACCESS       read-only
+  STATUS          current
+  DESCRIPTION     "This object gives SFP vendor revision."
+  DEFVAL          { ''H }
+    ::= { sfpPortManEntry 4 }  
+  
+  sfpLenght     OBJECT-TYPE
+	SYNTAX          DisplayString (SIZE(0..9))
+  MAX-ACCESS      read-only
+  STATUS          current
+  DESCRIPTION     "This object gives information regarding link length."
+  DEFVAL          { ''H }
+    ::= { sfpPortManEntry 5 }
+    
+  sfpConnector      OBJECT-TYPE
+	SYNTAX          DisplayString (SIZE(0..9))
+  MAX-ACCESS      read-only
+  STATUS          current
+  DESCRIPTION     "This object gives SFP connector type."
+  DEFVAL          { ''H }
+    ::= { sfpPortManEntry 6 } 
+
+------------------------------------------------------------------------
+---------------------------sysMonConfig---------------------------------
+------------------------------------------------------------------------
+
+	sysMonConfigTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF SysMonConfigEntry
+	MAX-ACCESS 	not-accessible
+	STATUS 			current
+	DESCRIPTION
+	"This table configures periodic monitoring parameters."
+	::= { sysMonConfig 1 }
+
+	sysMonConfigEntry OBJECT-TYPE
+	SYNTAX SysMonConfigEntry
+	MAX-ACCESS 	not-accessible
+	STATUS 			current
+	DESCRIPTION
+	""
+	INDEX { sysMonIndicator }
+	::= { sysMonConfigTable 1 }
+
+	SysMonConfigEntry ::= SEQUENCE {
+		sysMonIndicator	INTEGER,
+		sysMonEnable		EnableStatus,
+		sysMonPeriod		Integer32,
+		sysMonTrap      EnableStatus,
+		sysMonLog       EnableStatus,
+		sysMonLed    		EnableStatus,
+		sysMonDefaults	INTEGER
+	}
+
+	sysMonIndicator      OBJECT-TYPE
+	SYNTAX     INTEGER {
+		cpu-usage(1),
+		ram-usage(2),
+		power-supply(3),
+		onboard-power(4),
+		fan(5),
+		temperature(6),
+		laser(7)
+	}
+	MAX-ACCESS read-only
+	STATUS     current
+	DESCRIPTION
+	"Enumeration."
+	::= { sysMonConfigEntry 1 }
+
+	sysMonEnable OBJECT-TYPE
+	SYNTAX 			EnableStatus
+	MAX-ACCESS	read-write
+	STATUS 			current
+	DESCRIPTION
+	"Enabled/disabled"
+	::= { sysMonConfigEntry 2 }
+
+	sysMonPeriod OBJECT-TYPE
+	SYNTAX 			Integer32
+	MAX-ACCESS	read-write
+	STATUS 			current
+	DESCRIPTION
+	"Configure monitoring period in seconds."
+	::= { sysMonConfigEntry 3 }
+
+	sysMonTrap OBJECT-TYPE
+	SYNTAX 			EnableStatus
+	MAX-ACCESS	read-write
+	STATUS 			current
+	DESCRIPTION
+	"Enabled/disabled"
+	::= { sysMonConfigEntry 4 }
+
+	sysMonLog OBJECT-TYPE
+	SYNTAX 			EnableStatus
+	MAX-ACCESS	read-write
+	STATUS 			current
+	DESCRIPTION
+	"Enabled/disabled"
+	::= { sysMonConfigEntry 5 }
+
+	sysMonLed OBJECT-TYPE
+	SYNTAX 			EnableStatus
+	MAX-ACCESS	read-write
+	STATUS 			current
+	DESCRIPTION
+	"Enabled/disabled"
+	::= { sysMonConfigEntry 6 }
+
+	sysMonDefaults OBJECT-TYPE
+	SYNTAX 			INTEGER {
+		noop(0),
+		reset(1)
+	}
+	MAX-ACCESS	read-write
+	STATUS 			current
+	DESCRIPTION
+	"If set to 1, resets all configurations to defaults."
+	DEFVAL { noop }
+	::= { sysMonConfigEntry 7 }
+
+---*******************************************************************
+--------------Conformance Information---------------------------------
+---*******************************************************************
+
+    sysMonMIBGroups       OBJECT IDENTIFIER ::= { prvtSysMonConformance 2 }
+
+
+    sysMonNotificationGroup NOTIFICATION-GROUP
+    	NOTIFICATIONS {
+    		cpuUtilizationExceeded,
+    		ramFreeSpaceExceeded,
+		portErrorsExceeded,
+		portsBroadcastExceeded,
+		portsCRCErrExceeded,
+		portsRuntsExceeded,
+		portsOverSizeExceeded
+    	}
+	STATUS current
+     	DESCRIPTION
+        	"Private Notification Group."
+     ::= { sysMonMIBGroups 3 }
+
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-TE-PARAM-MIB b/MIBS/telco-systems/binos/PRVT-TE-PARAM-MIB
new file mode 100644
index 0000000..d509dd3
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-TE-PARAM-MIB
@@ -0,0 +1,657 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-TE-PARAM-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+
+PRVT-TE-PARAM-MIB DEFINITIONS ::= BEGIN
+
+   IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32, Gauge32, IpAddress
+         FROM SNMPv2-SMI
+
+      TEXTUAL-CONVENTION
+        FROM SNMPv2-TC
+
+      ifIndex
+         FROM IF-MIB
+
+      InetAddressType, InetAddress
+         FROM INET-ADDRESS-MIB
+		 mpls
+		 		FROM PRVT-CR-LDP-MIB;
+
+prvtTeParamMib  MODULE-IDENTITY
+      LAST-UPDATED "200712110000Z"
+      ORGANIZATION "BATM Advanced Communication"
+      CONTACT-INFO
+                   " BATM/Telco Systems Support team
+					Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"      
+      DESCRIPTION  "The MIB module for management of TE-params entities."
+
+			REVISION "200712110000Z"
+			DESCRIPTION "changed prvtTeParamAdminGroupName length to 32"
+
+			REVISION "200710250000Z"
+			DESCRIPTION "changed ospfOpaqueEngSupport description"
+			
+			REVISION "200708100000Z"
+			DESCRIPTION "changed object descriptions"
+
+			REVISION "200706080000Z"
+			DESCRIPTION "initial version"
+      ::= { mpls 9 }
+
+   -- Top level components of this MIB module
+
+   -- Notifications
+   prvtTeParamMibNotifications OBJECT IDENTIFIER ::= { prvtTeParamMib 0 }
+   -- Tables, Scalars
+    prvtTeParamMibObjects       OBJECT IDENTIFIER ::= {  prvtTeParamMib 1 }
+   -- Conformance
+    prvtTeParamMibConformance   OBJECT IDENTIFIER ::= { prvtTeParamMib 2 }
+
+-- text convention
+
+ TeLinkBandwidth ::= TEXTUAL-CONVENTION
+      STATUS       current
+      DESCRIPTION
+          "This type is used to represent link bandwidth in bps.  This
+           value is represented using a 4 octet IEEE floating point
+           format [IEEE].  The floating point representation is not
+           used to represent fractional value but rather to allow
+           specification of large numbers that cannot be expressed
+           with 32-bit integers."
+      REFERENCE
+          "IEEE Standard for Binary Floating-Point Arithmetic,
+           Standard 754-1985"
+      SYNTAX       OCTET STRING (SIZE(4))
+
+
+   -- TE Link Table
+
+   prvtTeParamTable OBJECT-TYPE
+      SYNTAX        SEQUENCE OF PrvtTeParamEntry
+      MAX-ACCESS    not-accessible
+      STATUS        current
+      DESCRIPTION		"A list of ip interface entries."
+      ::= {  prvtTeParamMibObjects 4 }
+
+   prvtTeParamEntry OBJECT-TYPE
+      SYNTAX        PrvtTeParamEntry
+      MAX-ACCESS    not-accessible
+      STATUS        current
+      DESCRIPTION
+          "An entry in this table exists for each entry from
+				 ipInterfaceTable. An ipInterfaceEntry in the ipInterfaceTable
+				 must exist. If a ip interface entry in the ipInterfaceTable
+				 is destroyed, then so is the corresponding entry in this 
+				 table. The administrative and operational status 
+				 values are controlled from the ifEntry and ipInterfaceEntry."
+      INDEX         { ifIndex }
+      ::= { prvtTeParamTable 1 }
+
+   PrvtTeParamEntry ::= SEQUENCE {
+     prvtTeParamLinkAddressType                 InetAddressType,
+     prvtTeParamMetric                      		Unsigned32,
+		 prvtTeParamLinkType												INTEGER,
+		 prvtTeParamPhysicalBandwidth								TeLinkBandwidth,
+     prvtTeParamMaximumReservableBandwidth  		TeLinkBandwidth,
+     prvtTeParamMaxReservableBandwidthPrio0			TeLinkBandwidth,
+     prvtTeParamMaxReservableBandwidthPrio1			TeLinkBandwidth,
+     prvtTeParamMaxReservableBandwidthPrio2			TeLinkBandwidth,
+     prvtTeParamMaxReservableBandwidthPrio3			TeLinkBandwidth,
+     prvtTeParamMaxReservableBandwidthPrio4			TeLinkBandwidth,
+     prvtTeParamMaxReservableBandwidthPrio5			TeLinkBandwidth,
+     prvtTeParamMaxReservableBandwidthPrio6			TeLinkBandwidth,
+     prvtTeParamMaxReservableBandwidthPrio7			TeLinkBandwidth,
+     prvtTeParamReservedBandwidthPrio0					TeLinkBandwidth,
+     prvtTeParamReservedBandwidthPrio1					TeLinkBandwidth,
+     prvtTeParamReservedBandwidthPrio2					TeLinkBandwidth,
+     prvtTeParamReservedBandwidthPrio3					TeLinkBandwidth,
+     prvtTeParamReservedBandwidthPrio4					TeLinkBandwidth,
+     prvtTeParamReservedBandwidthPrio5					TeLinkBandwidth,
+     prvtTeParamReservedBandwidthPrio6					TeLinkBandwidth,
+     prvtTeParamReservedBandwidthPrio7					TeLinkBandwidth,
+     prvtTeParamUnreservedBandwidthPrio0				TeLinkBandwidth,
+     prvtTeParamUnreservedBandwidthPrio1				TeLinkBandwidth,
+     prvtTeParamUnreservedBandwidthPrio2				TeLinkBandwidth,
+     prvtTeParamUnreservedBandwidthPrio3				TeLinkBandwidth,
+     prvtTeParamUnreservedBandwidthPrio4				TeLinkBandwidth,
+     prvtTeParamUnreservedBandwidthPrio5				TeLinkBandwidth,
+     prvtTeParamUnreservedBandwidthPrio6				TeLinkBandwidth,
+     prvtTeParamUnreservedBandwidthPrio7				TeLinkBandwidth,
+		 prvtTeParamResourceClass										Unsigned32
+   }
+
+ prvtTeParamAdminGroupTable OBJECT-TYPE
+      SYNTAX        SEQUENCE OF PrvtTeParamAdminGroupEntry
+      MAX-ACCESS    not-accessible
+      STATUS        current
+      DESCRIPTION
+          "Table for administrative groups manipulation."
+      ::= {  prvtTeParamMibObjects 5 }
+
+   prvtTeParamAdminGroupEntry OBJECT-TYPE
+      SYNTAX        PrvtTeParamAdminGroupEntry
+      MAX-ACCESS    not-accessible
+      STATUS        current
+      DESCRIPTION
+          "prvtTeParamAdminGroupTable allows specifiying of a group-name to each
+          existing administrative group. Each group is uniquely identified by its prvtTeParamAdminGroupId."
+      INDEX         { prvtTeParamAdminGroupId }
+      ::= { prvtTeParamAdminGroupTable 1 }
+
+	PrvtTeParamAdminGroupEntry ::= SEQUENCE {
+			prvtTeParamAdminGroupId					Integer32,
+			prvtTeParamAdminGroupName 			OCTET STRING
+	}
+
+  ospfOpaqueEngSupport OBJECT-TYPE
+  	SYNTAX  INTEGER {enable(1), disable(2)}
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+				"Controls ospf opaque support."
+		DEFVAL { enable }
+		::= { prvtTeParamMibObjects  1 }
+
+  ospfTeRouterId OBJECT-TYPE
+  	SYNTAX  IpAddress
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+				"Traffic engineering router ID."
+		::= { prvtTeParamMibObjects  2 }
+
+ospfTrafficEngSupport OBJECT-TYPE
+  	SYNTAX  INTEGER {enable(1), disable(2)}
+		MAX-ACCESS	read-write
+		STATUS	current
+		DESCRIPTION
+				"Controls traffic engeneering support. Read-only for current implementation."
+		DEFVAL { enable }
+		::= { prvtTeParamMibObjects  3 }
+
+
+   prvtTeParamLinkAddressType OBJECT-TYPE
+      SYNTAX        InetAddressType
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "The type of Internet address for the TE link."
+      ::= { prvtTeParamEntry 1 }
+
+    prvtTeParamMetric OBJECT-TYPE
+      SYNTAX        Unsigned32
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "The traffic engineering metric for the TE link is
+           derived from its component links.  All component links
+           within the TE link must have the same traffic
+           engineering metric."
+      REFERENCE
+          "Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
+      ::= { prvtTeParamEntry 2 }
+
+	prvtTeParamLinkType OBJECT-TYPE
+       SYNTAX    INTEGER {
+                           multiAccess (1),
+                           pointToPoint (2)
+                        }
+       MAX-ACCESS   read-only
+       STATUS       current
+       DESCRIPTION
+           "This indicates the type of the link such as point-to-point
+   or multi-access"
+   ::= {prvtTeParamEntry  3 }
+
+prvtTeParamPhysicalBandwidth  OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Physical bandwidth for the TE link."
+      ::= { prvtTeParamEntry 4 }
+
+   prvtTeParamMaximumReservableBandwidth OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link."
+      ::= { prvtTeParamEntry 5 }
+
+	prvtTeParamMaxReservableBandwidthPrio0 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link with priority 0."
+      ::= { prvtTeParamEntry 6 }
+
+	prvtTeParamMaxReservableBandwidthPrio1 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link with priority 1."
+      ::= { prvtTeParamEntry 7 }
+
+	prvtTeParamMaxReservableBandwidthPrio2 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link with priority 2."
+      ::= { prvtTeParamEntry 8 }
+
+	prvtTeParamMaxReservableBandwidthPrio3 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link with priority 3."
+      ::= { prvtTeParamEntry 9 }
+
+	prvtTeParamMaxReservableBandwidthPrio4 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link with priority 4."
+      ::= { prvtTeParamEntry 10 }
+
+	prvtTeParamMaxReservableBandwidthPrio5 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link with priority 5."
+      ::= { prvtTeParamEntry 11 }
+
+	prvtTeParamMaxReservableBandwidthPrio6 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link with priority 6."
+      ::= { prvtTeParamEntry 12 }
+
+	prvtTeParamMaxReservableBandwidthPrio7 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "Maximum reservable bandwidth for the TE link with priority 7."
+      ::= { prvtTeParamEntry 13 }
+
+prvtTeParamReservedBandwidthPrio0 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Reserved bandwidth for the TE link with priority 0."
+      ::= { prvtTeParamEntry 14 }
+
+prvtTeParamReservedBandwidthPrio1 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Reserved bandwidth for the TE link with priority 1."
+      ::= { prvtTeParamEntry 15 }
+
+prvtTeParamReservedBandwidthPrio2 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Reserved bandwidth for the TE link with priority 2."
+      ::= { prvtTeParamEntry 16 }
+
+prvtTeParamReservedBandwidthPrio3 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Reserved bandwidth for the TE link with priority 3."
+      ::= { prvtTeParamEntry 17 }
+
+prvtTeParamReservedBandwidthPrio4 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Reserved bandwidth for the TE link with priority 4."
+      ::= { prvtTeParamEntry 18 }
+
+prvtTeParamReservedBandwidthPrio5 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Reserved bandwidth for the TE link with priority 5."
+      ::= { prvtTeParamEntry 19 }
+
+prvtTeParamReservedBandwidthPrio6 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Reserved bandwidth for the TE link with priority 6."
+      ::= { prvtTeParamEntry 20 }
+
+prvtTeParamReservedBandwidthPrio7 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Reserved bandwidth for the TE link with priority 7."
+      ::= { prvtTeParamEntry 21 }
+
+prvtTeParamUnreservedBandwidthPrio0 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Unreserved bandwidth for the TE link with priority 0."
+      ::= { prvtTeParamEntry 22 }
+
+prvtTeParamUnreservedBandwidthPrio1 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Unreserved bandwidth for the TE link with priority 1."
+      ::= { prvtTeParamEntry 23 }
+
+prvtTeParamUnreservedBandwidthPrio2 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Unreserved bandwidth for the TE link with priority 2."
+      ::= { prvtTeParamEntry 24 }
+
+prvtTeParamUnreservedBandwidthPrio3 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Unreserved bandwidth for the TE link with priority 3."
+      ::= { prvtTeParamEntry 25 }
+
+prvtTeParamUnreservedBandwidthPrio4 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Unreserved bandwidth for the TE link with priority 4."
+      ::= { prvtTeParamEntry 26 }
+
+prvtTeParamUnreservedBandwidthPrio5 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Unreserved bandwidth for the TE link with priority 5."
+      ::= { prvtTeParamEntry 27 }
+
+prvtTeParamUnreservedBandwidthPrio6 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Unreserved bandwidth for the TE link with priority 6."
+      ::= { prvtTeParamEntry 28 }
+
+prvtTeParamUnreservedBandwidthPrio7 OBJECT-TYPE
+      SYNTAX        TeLinkBandwidth
+      UNITS         "bps"
+      MAX-ACCESS    read-only
+      STATUS        current
+      DESCRIPTION
+          "Unreserved bandwidth for the TE link with priority 7."
+      ::= { prvtTeParamEntry 29 }
+
+ prvtTeParamResourceClass OBJECT-TYPE
+		 SYNTAX 				Unsigned32
+      MAX-ACCESS    read-write
+      STATUS        current
+      DESCRIPTION
+          "This attribute specifies the TE link resource class.
+           The resource class is a 32 bit bitfield.  The resource class
+           for a link bundle is derived from the resource class of its
+           TE links.  All TE links within a link bundle must have the
+           same resource class.  Encoding of the resource class is
+           described in the 'Traffic Engineering (TE) Extensions to
+           OSPF Version 2' document."
+      ::= { prvtTeParamEntry 30 }
+
+prvtTeParamAdminGroupId OBJECT-TYPE
+		SYNTAX	 		Integer32 (0..2147483647)
+		MAX-ACCESS 	read-only
+		STATUS			current
+		DESCRIPTION "The prvtTeParamAdminGroupId object uniquely identifes an administrative group. Supported are 
+		 32 administrative groups."
+		::= {prvtTeParamAdminGroupEntry 1}
+
+prvtTeParamAdminGroupName OBJECT-TYPE
+		SYNTAX	 		OCTET STRING (SIZE(0..32))
+		MAX-ACCESS 	read-write
+		STATUS			current
+		DESCRIPTION "The prvtTeParamAdminGroupId object specifies the administrative group name."
+		::= {prvtTeParamAdminGroupEntry 2}
+
+prvtCspfStatisticsTable OBJECT-TYPE
+  SYNTAX        SEQUENCE OF PrvtCspfStatisticsEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+     "Table containing  the statistics relating to the running CSPF."
+  ::= {  prvtTeParamMibObjects 6 }
+
+   prvtCspfStatisticsEntry OBJECT-TYPE
+  SYNTAX        PrvtCspfStatisticsEntry
+  MAX-ACCESS    not-accessible
+  STATUS        current
+  DESCRIPTION
+     "Each entry contains the statistics relating to the running CSPF."
+  INDEX {  prvtCspfEntIndex }
+  ::= { prvtCspfStatisticsTable  1 }
+
+  PrvtCspfStatisticsEntry ::= SEQUENCE {
+	 		 prvtCspfEntIndex										Unsigned32,
+       prvtCspfStatNumRtQueries           Counter32,
+       prvtCspfStatNumRtsClcd             Counter32,
+       prvtCspfStatNumRtsInCache          Gauge32,
+       prvtCspfStatNumUpdatesRcvd         Counter32,
+       prvtCspfStatNumEntriesDeleted      Counter32,
+       prvtCspfStatNumLinkEntries         Gauge32,
+       prvtCspfStatNumNetworkEntries      Gauge32,
+       prvtCspfStatNumReturnedCaches      Counter32,
+       prvtCspfStatNumBkupQueries         Counter32,
+       prvtCspfStatNumBkupPathsFound      Counter32,
+       prvtCspfStatNumRouteUpdates        Counter32,
+       prvtCspfStatNumDiscardedRoutes     Counter32
+    }
+
+   prvtCspfEntIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "Identifies a CSPF entity."
+    ::= {  prvtCspfStatisticsEntry 1 }
+
+  prvtCspfStatNumRtQueries OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of ATG_QCTE_QUERY_CSPF_ROUTE queries sent in to this
+      CSPF process."
+   ::= {  prvtCspfStatisticsEntry 2 }
+
+  prvtCspfStatNumRtsClcd OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of routes successfully calculated by this CSPF process.
+      This statistic is incremented for each positive response to an
+      ATG_QCTE_QUERY_CSPF_ROUTE query."
+   ::= {  prvtCspfStatisticsEntry 3 }
+
+  prvtCspfStatNumRtsInCache OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of SPF trees currently stored in the cache.  Each tree
+      corresponds to a different set of constraints."
+   ::= {  prvtCspfStatisticsEntry 4 }
+
+  prvtCspfStatNumUpdatesRcvd OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of database updates signals that have been received by
+      this CSPF process, to indicate a new, updated or deleted database
+      entry."
+   ::= {  prvtCspfStatisticsEntry 5 }
+
+  prvtCspfStatNumEntriesDeleted OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of Database updates signals that have been received by this
+      CSPF process to indicate a database entry to delete."
+   ::= {  prvtCspfStatisticsEntry 6 }
+
+  prvtCspfStatNumLinkEntries OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of entries stored in the CSPF database for Traffic
+      Engineering links."
+   ::= {  prvtCspfStatisticsEntry 7 }
+
+  prvtCspfStatNumNetworkEntries OBJECT-TYPE
+   SYNTAX      Gauge32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of entries stored in the CSPF database for networks."
+   ::= {  prvtCspfStatisticsEntry 8 }
+
+  prvtCspfStatNumReturnedCaches OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of queries that have been satisfied through returning a route
+      stored in the cache."
+   ::= {  prvtCspfStatisticsEntry 9 }
+
+  prvtCspfStatNumBkupQueries OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of queries that have requested a backup path."
+   ::= {  prvtCspfStatisticsEntry 10 }
+
+  prvtCspfStatNumBkupPathsFound OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of queries that have been returned with a backup path
+      successfully calculated."
+   ::= {  prvtCspfStatisticsEntry 11 }
+
+  prvtCspfStatNumRouteUpdates OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of incremental route updates which have been made to routes
+      held in the cache."
+   ::= {  prvtCspfStatisticsEntry 12 }
+
+  prvtCspfStatNumDiscardedRoutes OBJECT-TYPE
+   SYNTAX      Counter32
+   MAX-ACCESS  read-only
+   STATUS      current
+   DESCRIPTION
+      "The number of routes which have been discarded from the cache due to
+      new TE information being received."
+   ::= {  prvtCspfStatisticsEntry 13 }
+   END
diff --git a/MIBS/telco-systems/binos/PRVT-TEMIB-ENTITY-MIB b/MIBS/telco-systems/binos/PRVT-TEMIB-ENTITY-MIB
new file mode 100644
index 0000000..0414c4b
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-TEMIB-ENTITY-MIB
@@ -0,0 +1,560 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   mpls_temib.mib
+-- ** Project:    T-Metro Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2006, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-TEMIB-ENTITY-MIB DEFINITIONS ::= BEGIN
+
+  -- PRODUCT-SHORT-NAME MPLS
+
+  IMPORTS
+      MODULE-IDENTITY, OBJECT-TYPE,Integer32, Unsigned32    FROM SNMPv2-SMI
+
+      MODULE-COMPLIANCE, OBJECT-GROUP                       FROM SNMPv2-CONF
+
+      TEXTUAL-CONVENTION, RowStatus, TruthValue             FROM SNMPv2-TC
+
+      PrvtLmgrIndex, PrvtLmgrPartnerStatus                  FROM PRVT-LMGR-MIB
+      mpls                                                  FROM PRVT-CR-LDP-MIB;
+
+
+  prvtTeMibEntityMib MODULE-IDENTITY
+      LAST-UPDATED "200712060000Z" 
+      ORGANIZATION "BATM Advanced Communication"
+      CONTACT-INFO
+                   " BATM/Telco Systems Support team
+					Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"      
+      DESCRIPTION  "The MIB module for management of TE-MIB entities."
+      
+      REVISION "200712060000Z"  
+       DESCRIPTION
+          "Initial."
+  ::= { mpls 8 }
+
+  prvtTeMibEntityObjects OBJECT IDENTIFIER ::= { prvtTeMibEntityMib 1 } -- tables
+
+-- Textual conventions
+
+  PrvtTeMibAdminStatus ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The desired administrative state of a TE-MIB entity."
+      SYNTAX      INTEGER {
+                      up(1),          -- active
+                      down(2)         -- inactive
+                  }
+
+  PrvtTeMibOperStatus ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The current operational state of a TE-MIB entity."
+      SYNTAX      INTEGER {
+                      up(1),          -- active
+                      down(2),        -- inactive
+                      goingUp(3),     -- activating
+                      goingDown(4),   -- deactivating
+                      actFailed(5)    -- activation failed
+                  }
+
+  PrvtTeMibEntityIndex ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The index value identifying a TE-MIB entity."
+      SYNTAX      Unsigned32
+
+  PrvtTeMibPartnerStatus ::= TEXTUAL-CONVENTION
+      STATUS      current
+      DESCRIPTION "The state of a TE-MIB entity partner."
+      SYNTAX      INTEGER {
+                      initial(0),     -- partner not active
+                      activating(1),  -- partner activating
+                      active(2),      -- partner active
+                      deactivating(3),-- partner deactivating
+                      failedOver(4),  -- partner failed, but recovering
+                      failed(5),      -- partner failed, but recovering
+                      unavailable(6)  -- partner unavailable
+                  }
+
+-- End of textual conventions
+
+-- TE-MIB entity table
+-- This table is used to create and manage TE-MIB entities.
+
+  prvtMplsTeMibEntityTable OBJECT-TYPE
+  -- FAMILY-SHORT-NAME temib
+      SYNTAX      SEQUENCE OF PrvtMplsTeMibEntityEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The table of TE-MIB entities."
+      ::= { prvtTeMibEntityObjects 1 }
+
+  prvtMplsTeMibEntityEntry OBJECT-TYPE
+      SYNTAX      PrvtMplsTeMibEntityEntry
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "Each entry represents a TE-MIB entity."
+      INDEX { prvtMplsTeMibEntityIndex }
+      ::= { prvtMplsTeMibEntityTable 1 }
+
+  PrvtMplsTeMibEntityEntry ::= SEQUENCE {
+          prvtMplsTeMibEntityIndex                 PrvtTeMibEntityIndex,
+          prvtMplsTeMibEntityAdminStatus           PrvtTeMibAdminStatus,
+          prvtMplsTeMibEntityOperStatus            PrvtTeMibOperStatus,
+          prvtMplsTeMibEntityRowStatus             RowStatus,
+          prvtMplsTeMibTunnelRetryInterval         Unsigned32,
+          prvtMplsTeMibTunnelRetryDecayRate        Unsigned32,
+          prvtMplsTeMibTunnelRetryMax              Integer32,
+          prvtMplsTeMibTnnlBufPoolSize             Unsigned32,
+          prvtMplsTeMibLsrIndex                    PrvtLmgrIndex,
+          prvtMplsTeMibLdbStatus                   PrvtTeMibPartnerStatus,
+          prvtMplsTeMibLraStatus                   PrvtLmgrPartnerStatus,
+          prvtMplsTeMibLdiStatus                   PrvtTeMibPartnerStatus,
+          prvtMplsTeMibRsvpEnable                  TruthValue,
+          prvtMplsTeMibCrldpEnable                 TruthValue,
+          prvtMplsTeMibCrldpIndex                  Unsigned32,
+          prvtMplsTeMibUseRsvpResvConf             BITS,
+          prvtMplsTeMibAllowGracefulDeletion       TruthValue,
+          prvtMplsTeMibShowTransitTunnels          TruthValue,
+          prvtMplsTeMibSupportCHopTable            TruthValue,
+          prvtMplsTeMibNhrIndex                    Unsigned32,
+          prvtMplsTeMibNhrBufPoolSize              Unsigned32,
+          prvtMplsTeMibNhrStatus                   PrvtTeMibPartnerStatus,
+          prvtMplsTeMibExtPrtSuppAdminStatus       PrvtTeMibAdminStatus,
+          prvtMplsTeMibRsvpIpv6AdminStatus         PrvtTeMibAdminStatus,
+          prvtMplsTeMibRsvpIpv6OperStatus          PrvtTeMibOperStatus,
+          prvtMplsTeMibDynFacilityBypass           TruthValue
+    }
+
+  prvtMplsTeMibEntityIndex OBJECT-TYPE
+      SYNTAX      PrvtTeMibEntityIndex
+      MAX-ACCESS  not-accessible
+      STATUS      current
+      DESCRIPTION
+          "The index of this TE-MIB entity table entry.  This is the
+           HAF entity index passed on the entity create parameters."
+      ::= { prvtMplsTeMibEntityEntry 1 }
+
+  prvtMplsTeMibEntityAdminStatus OBJECT-TYPE
+      SYNTAX      PrvtTeMibAdminStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "The desired administrative state of the TE-MIB entity.
+           When prvtMplsTeMibEntityRowStatus is 'active' and
+           prvtMplsTeMibEntityAdminStatus is 'up' the TE-MIB entity is active
+           and only these two fields can be modified."
+      DEFVAL { up }
+      ::= { prvtMplsTeMibEntityEntry 2 }
+
+  prvtMplsTeMibEntityOperStatus OBJECT-TYPE
+      SYNTAX      PrvtTeMibOperStatus
+      MAX-ACCESS  read-only
+      STATUS      current
+      DESCRIPTION
+          "The current operational state of the TE-MIB entity."
+      ::= { prvtMplsTeMibEntityEntry 3 }
+
+  prvtMplsTeMibEntityRowStatus OBJECT-TYPE
+      SYNTAX      RowStatus
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "The row status for the TE-MIB entity table entry, used to create
+           and destroy TE-MIB entities.
+           When prvtMplsTeMibEntityRowStatus is 'active' and
+           prvtMplsTeMibEntityAdminStatus is 'up' the TE-MIB entity is active
+           and only these two fields can be modified."
+      ::= { prvtMplsTeMibEntityEntry 4 }
+
+  prvtMplsTeMibTunnelRetryInterval OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..65535)
+      UNITS       "milliseconds"
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "The persistent tunnel retry interval.
+           This is the interval between the first failure of a persistent
+           tunnel and the first attempt to re-establish the tunnel.
+           A value of 0 indicates retrying is not supported.
+           A management agent may preempt a retry by resetting
+           mplsTunnelAdminStatus for the tunnel in question."
+      DEFVAL      { 3000 }
+      ::= { prvtMplsTeMibEntityEntry 5 }
+
+  prvtMplsTeMibTunnelRetryDecayRate OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..100)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "The persistent tunnel decay rate.  This is a percentage.
+           Thus a value of 10 increases the retry interval by ten per cent
+           of the previous value.  A value of 0 indicates a constant
+           retry rate."
+       DEFVAL     { 50 }
+      ::= { prvtMplsTeMibEntityEntry 6 }
+
+  prvtMplsTeMibTunnelRetryMax OBJECT-TYPE
+      SYNTAX      Integer32 (-1..255)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "The maximum number of retry attempts that will be made before a
+           persistent tunnel is deemed inoperable.  Once in this state,
+           a management agent should set mplsTunnelAdminStatus to 'up' to
+           attempt to reestablish the tunnel.
+           A value of -1 indicates infinite retry, so a persistent tunnel
+           will continue to be retried until it is successfully
+           established."
+      DEFVAL      { 10 }
+      ::= { prvtMplsTeMibEntityEntry 7 }
+
+  prvtMplsTeMibTnnlBufPoolSize OBJECT-TYPE
+      SYNTAX      Unsigned32 (0..2147483647)
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "The maximum number of buffers available for tunnel management
+           messages.  This is used to limit the number of tunnel management
+           messages to avoid buffer shortage conditions."
+      DEFVAL      { 8 }
+      ::= { prvtMplsTeMibEntityEntry 8 }
+
+  prvtMplsTeMibLsrIndex OBJECT-TYPE
+      SYNTAX      PrvtLmgrIndex
+      MAX-ACCESS  read-create
+      STATUS      current
+      DESCRIPTION
+          "The index of the PRVT-LMGR product instance which this TE-MIB is to
+           join to as its LDB interface provider. If this value is not
+           specified, or the value of this object is 0, TE-MIB will use the
+           prvtMplsTeMibEntityIndex value as the Lsr index when joining on the
+           LDB interface."
+      DEFVAL      { 0 }
+      ::= { prvtMplsTeMibEntityEntry 9 }
+
+   prvtMplsTeMibLdbStatus OBJECT-TYPE
+       SYNTAX      PrvtTeMibPartnerStatus
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+        "Diagnostic Field providing information about the status
+         of the Label Database Interface user as seen by the
+	 TE-MIB entity."
+      ::= { prvtMplsTeMibEntityEntry 10 }
+
+   prvtMplsTeMibLraStatus OBJECT-TYPE
+       SYNTAX      PrvtLmgrPartnerStatus
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+        "Diagnostic Field providing information about the status
+         of the LRAPI user as seen by the TE-MIB entity."
+      ::= { prvtMplsTeMibEntityEntry 11 }
+
+   prvtMplsTeMibLdiStatus OBJECT-TYPE
+       SYNTAX      PrvtTeMibPartnerStatus
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+        "A diagnostic value which reports the state of the LDI
+         join."
+      ::= { prvtMplsTeMibEntityEntry 12 }
+
+   prvtMplsTeMibRsvpEnable OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+        "A boolean indicating whether the PRVT-TE-MIB should expect
+         a join from PRVT-RSVP across the LRAPI.  This indicates
+         whether RSVP-TE LSP tunnels are supported or not."
+       DEFVAL { true }
+
+      ::= { prvtMplsTeMibEntityEntry 13 }
+
+   prvtMplsTeMibCrldpEnable OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+        "A boolean indicating whether the PRVT-TE-MIB should join
+         to PRVT-CR-LDP or not across the LDI, and therefore support
+         CR-LDP LSP tunnels or not."
+       DEFVAL { false }
+
+      ::= { prvtMplsTeMibEntityEntry 14 }
+
+   prvtMplsTeMibCrldpIndex OBJECT-TYPE
+       SYNTAX      Unsigned32
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+        "The index of the PRVT-MPLS product instance which this
+         TE-MIB is to join to as its LDI interface provider.  If
+         this value is not specified, or the value of this object
+         is 0, TE-MIB will use the prvtMplsTeMibEntityIndex value as
+         the CR-LDP product index when joining on the LDI
+         interface."
+       DEFVAL     { 0 }
+
+      ::= { prvtMplsTeMibEntityEntry 15 }
+
+   prvtMplsTeMibUseRsvpResvConf OBJECT-TYPE
+       SYNTAX      BITS{
+                       useResvConfForUNI(0),
+                       useResvConfForGMPLS(1)
+                       }
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+        "Flags field indicating whether a RESV_CONFIRM object
+         should be included in RSVP Resv messages.  The possible
+         bit values are as follows.
+
+         - useResvConfForUNI: RESV_CONFIRM objects should be
+           inserted into all UNI Resv messages.
+         - useResvConfForGMPLS: RESV_CONFIRM objects should be
+           inserted into all standard GMPLS Resv messages."
+
+      ::= { prvtMplsTeMibEntityEntry 16 }
+
+   prvtMplsTeMibAllowGracefulDeletion OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+        "A boolean indicating whether the TE-MIB should allow
+         tunnels to be deleted using the graceful deletion
+         procedure."
+       DEFVAL { false }
+
+      ::= { prvtMplsTeMibEntityEntry 17 }
+
+   prvtMplsTeMibShowTransitTunnels OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+         "A flag to indicate whether RSVP should inform TE-MIB about
+          LSPs for which this node is transit."
+       DEFVAL { false }
+
+      ::= { prvtMplsTeMibEntityEntry 18 }
+
+   prvtMplsTeMibSupportCHopTable OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+         "A flag to indicate whether TE-MIB should support the
+          mplsTunnelCHopTable."
+       DEFVAL { false }
+      ::= { prvtMplsTeMibEntityEntry 19 }
+
+   prvtMplsTeMibNhrIndex OBJECT-TYPE
+       SYNTAX      Unsigned32
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The index of the PRVT-MPLS product instance which this
+            TE-MIB is to join to as its NHR interface provider.  If
+            this value is not specified, or the value of this object
+            is 0, TE-MIB will use the prvtMplsTeMibEntityIndex value as
+            the LSR index when joining on the NHR interface."
+       DEFVAL      { 0 }
+       ::= { prvtMplsTeMibEntityEntry 20 }
+
+   prvtMplsTeMibNhrBufPoolSize OBJECT-TYPE
+       SYNTAX      Unsigned32 (0..2147483647)
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+           "The maximum number of buffers available for Next Hop
+            Routing Interface messages.  This is used to limit the
+            number of tunnel management messages to avoid buffer
+            shortage conditions."
+       DEFVAL      { 8 }
+       ::= { prvtMplsTeMibEntityEntry 21 }
+
+   prvtMplsTeMibNhrStatus OBJECT-TYPE
+       SYNTAX      PrvtTeMibPartnerStatus
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+        "A diagnostic value which reports the state of the NHR
+        join."
+      ::= { prvtMplsTeMibEntityEntry 22 }
+
+   prvtMplsTeMibExtPrtSuppAdminStatus OBJECT-TYPE
+       SYNTAX      PrvtTeMibAdminStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+        "The desired operational state of support for the extended
+         PROTECTION object defined in
+         draft-lang-ccamp-gmpls-recovery-e2e-signaling."
+       DEFVAL { down }
+      ::= { prvtMplsTeMibEntityEntry 23 }
+
+   prvtMplsTeMibRsvpIpv6AdminStatus OBJECT-TYPE
+       SYNTAX      PrvtTeMibAdminStatus
+       MAX-ACCESS  read-create
+       STATUS      current
+       DESCRIPTION
+        "Specifies whether the local node supports IPv6 LSPs.
+
+         Setting this to UP means that this node supports IPv6 LSPs
+         being set up to, from and through this node.
+
+         Setting this to DOWN means that IPv6 LSPs are NOT
+         supported by this node.  Existing IPv6 LSPs for which this
+         node is the ingress are torn down.
+
+         This field can be modified while TE-MIB is oper_status UP
+         or DOWN.
+
+         The value of this field MUST match the value of the
+         dcRsvpProductIpv6AdminStatus field in the
+         dcRsvpProductTable."
+       DEFVAL { down }
+      ::= { prvtMplsTeMibEntityEntry 24 }
+
+   prvtMplsTeMibRsvpIpv6OperStatus OBJECT-TYPE
+       SYNTAX      PrvtTeMibOperStatus
+       MAX-ACCESS  read-only
+       STATUS      current
+       DESCRIPTION
+        "The current operational status for IPv6 support.  When
+         this is UP IPv6 LSPs can be set up from this node.  When
+         this is DOWN there will be no active IPv6 LSPs."
+      ::= { prvtMplsTeMibEntityEntry 25 }
+
+   prvtMplsTeMibDynFacilityBypass OBJECT-TYPE
+       SYNTAX      TruthValue
+       MAX-ACCESS  read-write
+       STATUS      current
+       DESCRIPTION
+        "This object gives the user ability to globally enable/disable 
+         automatically creation of bypass tunnels for all LSPs. Bypass 
+         tunnels will be created on FRR tunnel request automatically.
+         The default value is true. The creation of Dynamic bypass tunnels 
+         is enabled"
+       DEFVAL { true }
+      ::= { prvtMplsTeMibEntityEntry 26 }
+
+-- Module compliance.
+
+-- Conformance Information.
+
+  prvtTeMibEntityConformance   OBJECT IDENTIFIER ::= { prvtTeMibEntityMib 2 }
+
+  prvtTeMibEntityCompliances OBJECT IDENTIFIER ::= { prvtTeMibEntityConformance 1 }
+  prvtTeMibEntityGroups      OBJECT IDENTIFIER ::= { prvtTeMibEntityConformance 2 }
+
+  prvtTeMibEntityMibCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The compliance statement for the PRVT-TEMIB product."
+    MODULE
+
+    MANDATORY-GROUPS { mplsTeMibMandatoryGroup }
+
+    GROUP mplsTeMibOptionalGroup
+    DESCRIPTION
+        "Optional TeMib objects."
+
+    GROUP mplsTeMibCrldpGroup
+    DESCRIPTION
+        "Group of Objects relating to CR-LDP."
+
+    ::= { prvtTeMibEntityCompliances 1 }
+
+
+-- Units of conformance.
+
+mplsTeMibMandatoryGroup OBJECT-GROUP
+   OBJECTS {
+      prvtMplsTeMibEntityRowStatus
+   }
+   STATUS  current
+   DESCRIPTION
+        "Mandatory Objects."
+   ::= { prvtTeMibEntityGroups 2 }
+
+mplsTeMibOptionalGroup OBJECT-GROUP
+   OBJECTS {
+      prvtMplsTeMibEntityAdminStatus,
+      prvtMplsTeMibEntityOperStatus,
+      prvtMplsTeMibTunnelRetryInterval,
+      prvtMplsTeMibTunnelRetryDecayRate,
+      prvtMplsTeMibTunnelRetryMax,
+      prvtMplsTeMibTnnlBufPoolSize,
+      prvtMplsTeMibLsrIndex,
+      prvtMplsTeMibLdbStatus,
+      prvtMplsTeMibLraStatus,
+      prvtMplsTeMibRsvpEnable,
+      prvtMplsTeMibUseRsvpResvConf,
+      prvtMplsTeMibAllowGracefulDeletion,
+      prvtMplsTeMibShowTransitTunnels,
+      prvtMplsTeMibSupportCHopTable,
+      prvtMplsTeMibNhrIndex,
+      prvtMplsTeMibNhrBufPoolSize,
+      prvtMplsTeMibNhrStatus,
+      prvtMplsTeMibExtPrtSuppAdminStatus,
+      prvtMplsTeMibRsvpIpv6AdminStatus,
+      prvtMplsTeMibRsvpIpv6OperStatus,
+      prvtMplsTeMibDynFacilityBypass
+   }
+   STATUS  current
+   DESCRIPTION
+        "Optional Objects."
+   ::= { prvtTeMibEntityGroups 3 }
+
+mplsTeMibCrldpGroup OBJECT-GROUP
+   OBJECTS {
+      prvtMplsTeMibLdiStatus,
+      prvtMplsTeMibCrldpEnable,
+      prvtMplsTeMibCrldpIndex
+   }
+   STATUS current
+   DESCRIPTION
+        "Group of objects relating to CR-LDP"
+   ::= { prvtTeMibEntityGroups 4 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-UPS-MIB b/MIBS/telco-systems/binos/PRVT-UPS-MIB
new file mode 100644
index 0000000..e5e6d80
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-UPS-MIB
@@ -0,0 +1,169 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename:   PRVT-UPS-MIB.mib
+-- ** Project:    T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose:    Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications.  All rights reserved.
+--                             WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information.  This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM.  Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+--
+PRVT-UPS-MIB DEFINITIONS ::= BEGIN
+    IMPORTS
+        MODULE-IDENTITY, OBJECT-TYPE,NOTIFICATION-TYPE
+                                            FROM SNMPv2-SMI
+        NOTIFICATION-GROUP                  	       FROM SNMPv2-CONF
+
+
+    switch   
+	                                     FROM PRVT-SWITCH-MIB;  
+	                                     
+
+    prvtUPSMib MODULE-IDENTITY
+        LAST-UPDATED "200801010000Z"
+        ORGANIZATION "BATM Advanced Communication"
+        CONTACT-INFO       
+        
+        "BATM/Telco Systems Support team
+				Email: 
+				For North America: techsupport@telco.com
+				For North Europe: support@batm.de, info@batm.de
+				For the rest of the world: techsupport@telco.com"        
+         
+        DESCRIPTION
+        "MIB module for monitoring the UPS connected to switch or ipSwitch"
+
+        -- revision history     
+        REVISION     "200801010000Z"
+     	 DESCRIPTION
+		"Removed redefined OIDs in private vendor extension definitions."  
+         REVISION     "200502160000Z"
+     	 DESCRIPTION
+			"Fixed spelling errors and changed the contact info." 
+
+		REVISION     "200305080000Z"
+		DESCRIPTION
+							"Move to SMI-V2."
+
+        REVISION     "200201280000Z"
+        DESCRIPTION
+                "Initial version."
+        ::= { switch 103 }
+
+
+    -- -----------------------------------------------------------------------------
+    -- UPS parameters
+    -- -----------------------------------------------------------------------------
+    prvtUPSNotifications  OBJECT IDENTIFIER ::= { prvtUPSMib 0 }
+    upsStatus 	OBJECT IDENTIFIER ::= { prvtUPSMib 1 }
+    prvtUPSConformance    OBJECT IDENTIFIER ::= { prvtUPSMib 2 }
+    
+    upsConnectedStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+                       connected(1),
+                       disconnected(2)
+                       }
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+            "This object indicates, if a UPS is connected to the device."
+		::= { upsStatus 1 }
+
+    upsLinePowerStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+                       unknown(1),
+                       fromExternalConnection(2),
+                       fromInternalBattery(3)
+                       }
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+            "This object indicates the external AD power line status: 
+             the UPS is supplying the power from the internal battery
+             or from an external AC power connection."
+		::= { upsStatus 2 }
+
+    upsBatteryStorageStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+                       unknown(1),
+                       moreThan30Minutes(2),
+                       lessThan30Minutes(3)
+                       }
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+            "This object shows the estimated time left until the UPS battery 
+             will discharge to the level at which the UPS must shutdown."
+		::= { upsStatus 3 }
+
+    upsInternalStatus OBJECT-TYPE
+        SYNTAX  INTEGER {
+                       unknown(1),
+                       ok(2),
+                       failure(3)
+                       }
+		MAX-ACCESS	read-only
+		STATUS	current
+		DESCRIPTION
+            "This object shows if the UPS has some kind of an internal 
+             failure."
+		::= { upsStatus 4 }
+     
+     -- Traps for use by prvtUPSMib
+
+     upsStatusChange NOTIFICATION-TYPE
+         OBJECTS { upsConnectedStatus,upsLinePowerStatus,
+                     upsBatteryStorageStatus,upsInternalStatus}
+	 STATUS current
+         DESCRIPTION
+                 "The upsStatusChange trap indicates that the sending 
+                  agent monitor detected a change in the status of the external 
+                  UPS, connected to the device."
+         ::= {prvtUPSNotifications 1}
+
+-- *******************************************************************
+--  Conformance Information
+-- *******************************************************************
+
+    prvtUPSMIBGroups       OBJECT IDENTIFIER ::= { prvtUPSConformance 2 }
+
+
+    prvtUPSNotificationGroup NOTIFICATION-GROUP
+    	NOTIFICATIONS {
+    		upsStatusChange
+    	}
+	STATUS current
+     	DESCRIPTION
+        	"Private Notification Group."
+     ::= { prvtUPSMIBGroups 3 }
+
+END
diff --git a/MIBS/telco-systems/binos/PRVT-Y1564-MIB b/MIBS/telco-systems/binos/PRVT-Y1564-MIB
new file mode 100644
index 0000000..f3df694
--- /dev/null
+++ b/MIBS/telco-systems/binos/PRVT-Y1564-MIB
@@ -0,0 +1,781 @@
+-- *********************************************************************
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-Y1564-MIB
+-- ** Project: T - Ethernet and Fast Ethernet IP Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2001, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications.
+-- BATM Advanced Communications retains all title and
+-- ownership in the Specification, including any revisions.
+
+-- BATM Advanced Communications grants all interested parties a non-exclusive
+-- license to use and distribute an unmodified copy of this
+-- Specification in connection with management of BATM Advanced Communications 
+-- and Telco Systems products, and without fee, provided that the following
+-- conditions are met:
+-- 1. Redistributions of this specification must retain the above copyright
+-- notice, this list of conditions and the following disclaimer.
+-- 2. Redistributions in binary form must reproduce the above copyright
+-- notice, this list of conditions and the following disclaimer in the
+-- documentation and/or other materials provided with the distribution.
+-- 3. The name of the BATM Advanced Communications MAY NOT be used to endorse
+-- or promote products derived from this specification without specific prior written
+-- permission.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SPECIFICATIONS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SPECIFICATION CONTAINED IN THIS FILE.
+PRVT-Y1564-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32, NOTIFICATION-TYPE
+        FROM SNMPv2-SMI                  -- [RFC2578]
+    MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP       
+        FROM SNMPv2-CONF                 -- [RFC2580]
+    RowStatus, TruthValue, DisplayString
+        FROM SNMPv2-TC                   -- [RFC2579]
+    SnmpAdminString
+        FROM SNMP-FRAMEWORK-MIB          -- [RFC2571]
+    switch
+ 	FROM PRVT-SWITCH-MIB;
+
+prvtY1564Mib MODULE-IDENTITY
+LAST-UPDATED "201202270000Z"
+ORGANIZATION "BATM Advanced Communication"       
+CONTACT-INFO
+"BATM/Telco Systems Support team
+Email: 
+For North America: techsupport@telco.com
+For North Europe: support@batm.de, info@batm.de
+For the rest of the world: techsupport@telco.com"
+
+DESCRIPTION
+"This MIB provides the extended capability of controlling and 
+provisioning for Y1564 test.
+It adds extra functionality for DISMAN-PING-MIB"
+      -- revision history
+	REVISION       "201202270000Z"
+	DESCRIPTION
+	"Initial version."
+
+::= { switch 129 }
+
+-- ***********************************************
+-- ************ Top level structure of the MIB****
+-- ***********************************************
+ prvtY1564Notifications              OBJECT IDENTIFIER ::= { prvtY1564Mib 0 }
+ prvtY1564Objects                    OBJECT IDENTIFIER ::= { prvtY1564Mib 1 }
+ prvtY1564Conformance                OBJECT IDENTIFIER ::= { prvtY1564Mib 2 }
+
+prvtY1564Test OBJECT IDENTIFIER ::= { prvtY1564Objects 1 }
+prvtY1564TestResult OBJECT IDENTIFIER ::= { prvtY1564Objects 2 }
+prvtY1564Profiles OBJECT IDENTIFIER ::= { prvtY1564Objects 3 }
+
+-- ***********************************************
+-- ************* global scalar objects ***********
+-- ***********************************************
+
+prvtY1564TestTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PrvtY1564TestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+        "This table holds the configuration for a Y1564 test"
+    ::= { prvtY1564Test 1 }
+
+prvtY1564TestEntry OBJECT-TYPE
+	SYNTAX PrvtY1564TestEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"NONE"
+	INDEX {
+		prvtY1564TestName
+              }
+	::= { prvtY1564TestTable 1 }
+
+PrvtY1564TestEntry ::= SEQUENCE {
+	prvtY1564TestName		SnmpAdminString,
+    prvtY1564TestType 		INTEGER,
+	prvtY1564TestMode       INTEGER,
+	prvtY1564TestExecStatus		INTEGER,
+	prvtY1564TestSourceType		INTEGER,
+    prvtY1564TestSource		OCTET STRING,
+    prvtY1564TestTargetType		INTEGER,
+    prvtY1564TestTarget		OCTET STRING,
+	prvtY1564TestTimeout		Unsigned32,
+    prvtY1564TestCIR			Unsigned32,
+	prvtY1564TestEIR Unsigned32,
+	prvtY1564TestConfigurationTestTrafficPolicing TruthValue,
+	prvtY1564TestConfigurationTestCirSteps Unsigned32,
+	prvtY1564TestConfigurationStepDuration Unsigned32,
+	prvtY1564TestPerformanceTestDuration INTEGER,
+    prvtY1564TestCVLAN		Unsigned32,
+	prvtY1564TestCVLANPriority	Unsigned32,
+	prvtY1564TestCVLANDropEligible	TruthValue,
+	prvtY1564TestSVLAN		Unsigned32,
+	prvtY1564TestSVLANPriority	Unsigned32,
+	prvtY1564TestSVLANDropEligible	TruthValue,
+	prvtY1564TestPDUSize		INTEGER,
+	prvtY1564TestLoopbackType 	INTEGER,
+	prvtY1564TestPaternType 	INTEGER,
+	prvtY1564TestProfileName    OCTET STRING,
+       
+	prvtY1564TestRowStatus		RowStatus
+}
+
+
+
+prvtY1564TestName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This string is used to describe the test name for the
+        Y1564 test. It is also used as a test identifier."
+    ::= { prvtY1564TestEntry 1 }
+
+prvtY1564TestType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+        testHead ( 1 ),
+		testLoopback( 2 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Y1564 test type"
+	::= { prvtY1564TestEntry 2 }
+	
+prvtY1564TestMode OBJECT-TYPE
+	SYNTAX INTEGER {
+	configurationTest ( 1 ),
+	performanceTest ( 2 ),
+	both ( 3 )
+	}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify test mode"
+	::= { prvtY1564TestEntry 3 }	
+
+prvtY1564TestExecStatus OBJECT-TYPE
+	SYNTAX INTEGER
+	{
+		notRunning ( 1 ),
+		running ( 2 )
+	}
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Y1564   test execution status."
+	DEFVAL { notRunning }
+	::= { prvtY1564TestEntry 4 }
+
+
+prvtY1564TestSourceType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		none( 0 ),
+		mac ( 1 ),
+		mep ( 2 )
+	}
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Y1564 test source type."
+	::= { prvtY1564TestEntry 5}
+
+prvtY1564TestSource OBJECT-TYPE
+	SYNTAX OCTET STRING (SIZE(1..17))
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"String that holds either the MAC or the MEP ID.
+	 MAC should be in the format AA:BB:CC:DD:EE:FF
+	 MEP shold be in the format DOMAIN:MA:MEP that represent 
+	 the values corresponding to dot1agCfmMdIndex, 
+	 dot1agCfmMaIndex and dot1agCfmMepIdentifier from 
+	 IEEE8021-CFM-MIB.
+	 e.g.:
+		MAC:   00:A0:12:5C:12:C0
+		MEP:   1:1:2"
+	::= { prvtY1564TestEntry 6 }
+
+prvtY1564TestTargetType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		none( 0 ),
+		mac ( 1 ),
+		mep ( 2 )
+	}
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Y1564 test target type."
+	::= { prvtY1564TestEntry 7 }
+
+prvtY1564TestTarget OBJECT-TYPE
+	SYNTAX OCTET STRING (SIZE(1..17))
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"String that holds either the MAC or the MEP ID.
+	 MAC should be in the format AA:BB:CC:DD:EE:FF
+	 MEP shold be in the format DOMAIN:MA:MEP that represent 
+	 the values corresponding to dot1agCfmMdIndex, 
+	 dot1agCfmMaIndex and dot1agCfmMepIdentifier from 
+	 IEEE8021-CFM-MIB.
+	 e.g.:
+		MAC:   00:A0:12:5C:12:C0
+		MEP:   1:1:2"
+	::= { prvtY1564TestEntry 8 }
+
+prvtY1564TestTimeout OBJECT-TYPE
+	SYNTAX Unsigned32 (0..100)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Y1564 test timeout in 0.1 of a second increments."
+	DEFVAL { 1 }
+	::= { prvtY1564TestEntry 9 }
+
+prvtY1564TestCIR OBJECT-TYPE
+	SYNTAX Unsigned32 (64..1000000)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Y1564   Committed Information Rate (CIR) value."
+	::= { prvtY1564TestEntry 10 }
+	
+prvtY1564TestEIR OBJECT-TYPE
+	SYNTAX Unsigned32 (0..1000000)
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify Excess Information Rate"
+	::= { prvtY1564TestEntry 11 }
+
+prvtY1564TestConfigurationTestTrafficPolicing OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify Traffic Policing "
+	::= { prvtY1564TestEntry 12 }
+
+
+	prvtY1564TestConfigurationTestCirSteps OBJECT-TYPE
+	SYNTAX Unsigned32 (1..10)
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify the number of Comitted Information Rate Steps"
+	::= { prvtY1564TestEntry 13 }
+
+	prvtY1564TestConfigurationStepDuration OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60)
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify the configuration step duration, in seconds. This duration is used for every CIR step test and 
+	also for EIR test and Policing test."
+	::= { prvtY1564TestEntry 14 }
+
+	prvtY1564TestPerformanceTestDuration OBJECT-TYPE
+	SYNTAX INTEGER {
+	testDuration15min (15),
+	testDuration30min (30)
+	}
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify the performane test duration, in minutes"
+	::= { prvtY1564TestEntry 15}
+	
+
+	prvtY1564TestCVLAN OBJECT-TYPE
+	SYNTAX Unsigned32 (0..4094)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"C-VLAN ID for the Y1564   test."
+	::= { prvtY1564TestEntry 16 }
+
+	prvtY1564TestCVLANPriority OBJECT-TYPE
+	SYNTAX Unsigned32 (0..7)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"VPT for C-VLAN0 for the Y1564   test."
+	::= { prvtY1564TestEntry 17 }
+
+    prvtY1564TestCVLANDropEligible OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Drop Eligible flag for C-VLAN for the Y1564   test."
+	::= { prvtY1564TestEntry 18 }
+
+    prvtY1564TestSVLAN OBJECT-TYPE
+	SYNTAX Unsigned32 (0..4094)
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"S-VLAN ID for the Y1564   test."
+	::= { prvtY1564TestEntry 19 }
+
+prvtY1564TestSVLANPriority OBJECT-TYPE
+	SYNTAX Unsigned32 (0..7)
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"VPT for S-VLAN0 for the Y1564 test."
+	::= { prvtY1564TestEntry 20 }
+
+prvtY1564TestSVLANDropEligible OBJECT-TYPE
+	SYNTAX TruthValue
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Drop Eligible flag for S-VLAN for the Y1564 test."
+	::= { prvtY1564TestEntry 21 }
+
+prvtY1564TestPDUSize OBJECT-TYPE
+	SYNTAX  INTEGER
+    {
+	value64 ( 64 ),
+	value128 ( 128 ),
+	value256 ( 256 ),
+	value512 ( 512),
+	value1024 ( 1024 ),
+	value1280 ( 1280 ),
+	value1518 ( 1518 ),
+	value2000 ( 2000 ),
+	value9000 ( 9000)
+	} 	
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Packet sizes for Y1564 test:
+	   64,128,256,512,1024,1280,1518,2000,9000"
+	::= { prvtY1564TestEntry 22 }
+
+prvtY1564TestLoopbackType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		macSwap ( 1 ),
+                oam ( 2 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Y1564   test loopback type."
+	::= { prvtY1564TestEntry 23 }
+
+prvtY1564TestPaternType OBJECT-TYPE
+	SYNTAX INTEGER
+        {
+		null ( 1 ),
+                nullCRC ( 2 ),
+		prbs ( 3 ),
+                prbsCRC ( 4 ),
+                none ( 8 )
+	}
+	MAX-ACCESS read-write
+	STATUS current
+	DESCRIPTION
+	"Y1564   test patern type.
+	 Options for it are none, null, null-crc, prbs, prbs-crc."
+	::= { prvtY1564TestEntry 24 }
+	
+
+prvtY1564TestProfileName OBJECT-TYPE
+        SYNTAX OCTET STRING (SIZE(0..32))
+        MAX-ACCESS read-create
+        STATUS current
+        DESCRIPTION
+        "Name assigned to the Y1564 profile."
+        DEFVAL { '00'H }
+        ::= { prvtY1564TestEntry 25 }	
+	
+
+prvtY1564TestRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"The status of the row entry.
+	 The writable columns in a row can not be changed if the row
+	 is active. Certain columns must have a valid value before a row
+	 can be activated."
+	::= { prvtY1564TestEntry 26 }    
+	 
+
+-- ***********************************************
+-- *************  TEST RESULT *************
+-- ***********************************************
+
+prvtY1564TestResultTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtY1564TestResultEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+        "This table contains Y1564 results for tests."
+	::= { prvtY1564TestResult 1 }
+
+prvtY1564TestResultEntry OBJECT-TYPE
+	SYNTAX PrvtY1564TestResultEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION	"NONE"
+	INDEX { 
+		prvtY1564TestName,
+		prvtY1564TestResultIndex }
+	::= { prvtY1564TestResultTable 1 }
+
+PrvtY1564TestResultEntry ::= SEQUENCE {
+	prvtY1564TestResultIndex 			Unsigned32,
+	prvtY1564TestResultSentInformationRate	Unsigned32,
+	prvtY1564TestResultPacketSize		Unsigned32,
+	prvtY1564TestResultMode		INTEGER,
+	prvtY1564TestResultFrameLoss		Unsigned32,
+	prvtY1564TestResultInformationRate		Unsigned32,
+	prvtY1564TestResultFrameTransferDelay		Unsigned32,
+	prvtY1564TestResutFrameDelayVariation            Unsigned32,
+	prvtY1564TestResultStatus			INTEGER
+   
+       
+}
+
+prvtY1564TestResultIndex OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"Y1564   test results table index.
+	Index will take values 1 to 13, each value representing a percentage 
+	of the CIR or EIR.1-10 step of CIR , EIR+CIR, EIR+CIR+25%EIR + Peformance test CIR
+	The leaf prvtY1564TestResultFrameSize will present this value
+	in a more user-friendly way."
+	::= { prvtY1564TestResultEntry 1 }
+	
+prvtY1564TestResultSentInformationRate OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"The sent information rate at each test step"
+	::= { prvtY1564TestResultEntry 2 }	
+	
+prvtY1564TestResultPacketSize OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"The packet size for a Y1564 test packet"
+	::= { prvtY1564TestResultEntry 3 }
+
+prvtY1564TestResultMode OBJECT-TYPE
+	 SYNTAX INTEGER
+        {
+		    notAvailable ( 1 ),
+            configurationCIRTest ( 2),
+			configurationEIRTest ( 3),
+			configurationPolicingTest ( 4),
+			performanceTest ( 5 )
+			
+        }
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"The Y1564 test mode correspondig to the result"
+	::= { prvtY1564TestResultEntry 4 }	
+	
+
+prvtY1564TestResultFrameLoss OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Frame loss of the Y1564  test measured in 0.001 of a percent"
+	::= { prvtY1564TestResultEntry 5 }
+
+prvtY1564TestResultInformationRate OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"The received information Rate of the Y1564  test measured in Kbps"
+	::= { prvtY1564TestResultEntry 6 }
+
+prvtY1564TestResultFrameTransferDelay OBJECT-TYPE
+	SYNTAX Unsigned32
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Frame transfer delay  for Y1564 test measured in 1/100th of a microsecond.."
+	::= { prvtY1564TestResultEntry 7 }
+	
+prvtY1564TestResutFrameDelayVariation OBJECT-TYPE
+        SYNTAX Unsigned32
+        MAX-ACCESS read-only
+        STATUS current
+        DESCRIPTION
+        "Frame delay variation for Y1564 test measured in 1/100th of a microsecond."
+        ::= { prvtY1564TestResultEntry 8 }
+		
+prvtY1564TestResultStatus OBJECT-TYPE
+        SYNTAX INTEGER
+        {
+                notAvailable ( 1 ),
+                ready ( 2 ),
+                error ( 3 )
+        }
+	MAX-ACCESS read-only
+	STATUS current
+	DESCRIPTION
+	"Status of the Y1564  test"
+	::= { prvtY1564TestResultEntry 9 }
+
+
+
+-- ***********************************************
+-- ****************** PROFILE *******************
+-- ***********************************************
+prvtY1564ProfileTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF PrvtY1564ProfileEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION
+	"Table contains Y1564 thresholds."
+	::= { prvtY1564Profiles 1 }
+
+prvtY1564ProfileEntry OBJECT-TYPE
+	SYNTAX PrvtY1564ProfileEntry
+	MAX-ACCESS not-accessible
+	STATUS current
+	DESCRIPTION	"NONE"
+	INDEX { prvtY1564ProfileName }
+	::= { prvtY1564ProfileTable 1 }
+
+PrvtY1564ProfileEntry ::= SEQUENCE {
+		prvtY1564ProfileName      SnmpAdminString,
+		prvtY1564ProfileFrameLoss Unsigned32,
+		prvtY1564ProfileFrameTransferDelay Unsigned32,
+		prvtY1564ProfileFrameDelayVariation Unsigned32,
+        prvtY1564ProfileRowStatus                 RowStatus
+       
+       }
+
+prvtY1564ProfileName OBJECT-TYPE
+    SYNTAX      SnmpAdminString (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION
+       "This string is used to describe the test profile name for the
+        Y1564 test. It is also used as a profile identifier."
+    ::= { prvtY1564ProfileEntry 1 }
+	
+	prvtY1564ProfileFrameLoss OBJECT-TYPE
+	SYNTAX Unsigned32 (0..100000)
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify maximum frameloss to declare test succeeded"
+::= { prvtY1564ProfileEntry 2 }
+
+	prvtY1564ProfileFrameTransferDelay OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60000000)
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify maximum frame transfer delay in microseconds  to declare test succeeded"
+	::= { prvtY1564ProfileEntry 3 }
+
+	prvtY1564ProfileFrameDelayVariation OBJECT-TYPE
+	SYNTAX Unsigned32 (1..60000000)
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Specify maximum frame delay variation in microseconds to declare test succeeded"
+::= { prvtY1564ProfileEntry 4 }
+
+prvtY1564ProfileRowStatus OBJECT-TYPE
+	SYNTAX RowStatus
+	MAX-ACCESS read-create
+	STATUS current
+	DESCRIPTION
+	"Creation/delete/edit of the Y1564 profile. "
+	::= { prvtY1564ProfileEntry 5 }
+
+-- ***********************************************
+-- **************** Notification *****************
+-- ***********************************************
+
+prvtY1564ProbeFailed NOTIFICATION-TYPE
+	OBJECTS {
+		prvtY1564TestType,
+		prvtY1564TestResultStatus
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever a Y1564 probe
+		on a specific test fails."
+	::= { prvtY1564Notifications 1 }
+
+prvtY1564ProbeSuccess NOTIFICATION-TYPE
+	OBJECTS {
+		prvtY1564TestType,
+		prvtY1564TestResultStatus
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever a Y1564 probe
+		on a specific test finishes with success."
+	::= { prvtY1564Notifications 2 }
+
+prvtY1564TestFinished NOTIFICATION-TYPE
+	OBJECTS {
+		prvtY1564TestExecStatus
+	}
+	STATUS current
+	DESCRIPTION
+		"This trap should be sent whenever a Y1564  test is finished"
+	::= { prvtY1564Notifications 3 }
+
+-- ******************************************************************
+-- PRVT-Y1564 MIB Module - Conformance Information
+-- ******************************************************************
+
+prvtY1564Compliances OBJECT IDENTIFIER ::= { prvtY1564Conformance 1 }
+prvtY1564Groups      OBJECT IDENTIFIER ::= { prvtY1564Conformance 2 }
+
+-- ******************************************************************
+-- Units of conformance
+-- ******************************************************************
+
+
+prvtY1564TestGroup OBJECT-GROUP
+    OBJECTS {
+        prvtY1564TestType,
+		prvtY1564TestMode,
+		prvtY1564TestExecStatus,
+		prvtY1564TestSourceType,
+        prvtY1564TestSource,
+        prvtY1564TestTargetType,
+        prvtY1564TestTarget,
+		prvtY1564TestTimeout,
+        prvtY1564TestCIR ,
+		prvtY1564TestEIR ,
+		prvtY1564TestConfigurationTestTrafficPolicing ,
+		prvtY1564TestConfigurationTestCirSteps ,
+		prvtY1564TestConfigurationStepDuration ,
+		prvtY1564TestPerformanceTestDuration ,
+		prvtY1564TestCVLAN,
+		prvtY1564TestCVLANPriority,
+		prvtY1564TestCVLANDropEligible,
+		prvtY1564TestSVLAN,
+		prvtY1564TestSVLANPriority,
+		prvtY1564TestSVLANDropEligible,
+		prvtY1564TestPDUSize,
+		prvtY1564TestLoopbackType,
+		prvtY1564TestPaternType,
+		prvtY1564TestProfileName,
+		prvtY1564TestRowStatus 
+	
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Y1564  test group."
+    ::= { prvtY1564Groups 1 }
+
+
+prvtY1564TestResultsGroup OBJECT-GROUP
+    OBJECTS {
+	prvtY1564TestResultSentInformationRate,
+	prvtY1564TestResultPacketSize,
+	prvtY1564TestResultMode,
+	prvtY1564TestResultFrameLoss,
+	prvtY1564TestResultInformationRate,
+	prvtY1564TestResultFrameTransferDelay,
+	prvtY1564TestResutFrameDelayVariation,
+	prvtY1564TestResultStatus
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Y1564  test results group."
+    ::= { prvtY1564Groups 2 }
+
+prvtY1564ProfilesGroup OBJECT-GROUP
+    OBJECTS {
+        prvtY1564ProfileFrameLoss ,
+		prvtY1564ProfileFrameTransferDelay ,
+		prvtY1564ProfileFrameDelayVariation ,
+        prvtY1564ProfileRowStatus
+	}
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Y1564 profiles group."
+    ::= { prvtY1564Groups 3 }
+
+prvtY1564NotificationsGroup NOTIFICATION-GROUP
+    NOTIFICATIONS {
+      prvtY1564ProbeFailed,
+      prvtY1564ProbeSuccess,
+      prvtY1564TestFinished
+    }
+    STATUS      current
+    DESCRIPTION
+       "Objects for the Notifications group."
+    ::= { prvtY1564Groups 4 }
+    
+
+
+
+-- ******************************************************************
+-- MIB Module Compliance statements
+-- ******************************************************************
+
+prvtY1564Compliance MODULE-COMPLIANCE
+    STATUS      current
+    DESCRIPTION
+       "The compliance statement for support of the Y1564 MIB module."
+    MODULE
+        MANDATORY-GROUPS {
+        prvtY1564TestGroup,
+	    prvtY1564TestResultsGroup,
+	    prvtY1564ProfilesGroup,
+	    prvtY1564NotificationsGroup
+            }
+
+    OBJECT prvtY1564TestRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+      
+    OBJECT prvtY1564ProfileRowStatus
+      SYNTAX       RowStatus { active(1), notInService(2), notReady(3) }
+      WRITE-SYNTAX RowStatus { active(1), notInService(2), notReady(3),
+                               createAndWait(5), destroy(6) }
+      DESCRIPTION "Support for createAndWait is required."
+
+
+    ::= { prvtY1564Compliances 1 }
+
+END
+
diff --git a/MIBS/telco-systems/binox/PRVT-ALARM-MIB b/MIBS/telco-systems/binox/PRVT-ALARM-MIB
new file mode 100644
index 0000000..0d20e1a
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-ALARM-MIB
@@ -0,0 +1,140 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-ALARM-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-ALARM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    software
+        FROM PRVT-SWITCH-MIB
+    Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+prvtAlarmMIB MODULE-IDENTITY
+    LAST-UPDATED "201303250000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Information for current snmp allarms"
+    REVISION    "201303250000Z"
+    DESCRIPTION 
+        "Initial implementation."
+    ::= { software 4 }
+
+
+prvtAlarmMIBObjects OBJECT IDENTIFIER
+    ::= { prvtAlarmMIB 1 }
+
+prvtUpdatedCurrentAlarmCounter OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last updated alarm counter"
+    ::= { prvtAlarmMIBObjects 1 }
+
+prvtAlarmCurrentTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtAlarmCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains current alarms."
+    ::= { prvtAlarmMIBObjects 2 }
+
+prvtAlarmCurrentEntry OBJECT-TYPE
+    SYNTAX      PrvtAlarmCurrentEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtAlarmCurrentTable containing the info of a 
+         current RAISED trap."
+    INDEX       { prvtAlarmCurrentCounter }
+    ::= { prvtAlarmCurrentTable 1 }
+
+PrvtAlarmCurrentEntry ::= SEQUENCE {
+    prvtAlarmCurrentCounter         Counter32,
+    prvtAlarmCurrentRaisedTime      Unsigned32,
+    prvtAlarmCurrentSeverity        INTEGER,
+    prvtAlarmCurrentDescription     OCTET STRING
+}
+
+prvtAlarmCurrentCounter OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A running counter of open alarms, the counter
+         is incremented on every new alarm. It is cleared after reset."
+    ::= { prvtAlarmCurrentEntry 1 }
+
+prvtAlarmCurrentRaisedTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The raised time of this alarm.
+         Time in seconds since January 1, 1970 00:00 UTC."
+    ::= { prvtAlarmCurrentEntry 2 }
+
+prvtAlarmCurrentSeverity OBJECT-TYPE
+    SYNTAX      INTEGER { clear(0), event(1), warning(2), minor(3), 
+                    major(4), critical(5), unknown(99) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current alarm severity"
+    ::= { prvtAlarmCurrentEntry 3 }
+
+prvtAlarmCurrentDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The alarm description."
+    ::= { prvtAlarmCurrentEntry 4 }
+
+END -- end of module PRVT-ALARM-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-CFM-MIB b/MIBS/telco-systems/binox/PRVT-CFM-MIB
new file mode 100644
index 0000000..473b0e3
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-CFM-MIB
@@ -0,0 +1,3376 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-CFM-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-CFM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    Counter32, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, 
+    OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    MacAddress, RowStatus, TAddress, TDomain, TEXTUAL-CONVENTION, 
+    TimeStamp, TruthValue
+        FROM SNMPv2-TC;
+
+prvtCfmMIB MODULE-IDENTITY
+    LAST-UPDATED "201404170000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Prvt extension of Connectivity Fault Management module for managing IEEE 802.1ag"
+    REVISION    "201404170000Z"
+    DESCRIPTION 
+        "Increased the number of profiles to 64"
+    REVISION    "201104110000Z"
+    DESCRIPTION 
+        "Initial"
+    ::= { switch 131 }
+
+
+LldpChassisIdSubtype ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "This TC describes the source of a chassis identifier.
+         The enumeration 'chassisComponent(1)' represents a chassis
+         identifier based on the value of entPhysicalAlias object
+         (defined in IETF RFC 2737) for a chassis component (i.e.,
+         an entPhysicalClass value of 'chassis(3)').
+         The enumeration 'interfaceAlias(2)' represents a chassis
+         identifier based on the value of ifAlias object (defined in
+         IETF RFC 2863) for an interface on the containing chassis.
+         The enumeration 'portComponent(3)' represents a chassis
+         identifier based on the value of entPhysicalAlias object
+         (defined in IETF RFC 2737) for a port or backplane
+         component (i.e., entPhysicalClass value of 'port(10)' or
+         'backplane(4)'), within the containing chassis.
+         The enumeration 'macAddress(4)' represents a chassis
+         identifier based on the value of a unicast source address
+         (encoded in network byte order and IEEE 802.3 canonical bit
+         order), of a port on the containing chassis as defined in
+         IEEE Std 802-2001.
+         The enumeration 'networkAddress(5)' represents a chassis
+         identifier based on a network address, associated with
+         a particular chassis. The encoded address is actually
+         composed of two fields. The first field is a single octet,
+         representing the IANA AddressFamilyNumbers value for the
+         specific address type, and the second field is the network
+         address value.
+         The enumeration 'interfaceName(6)' represents a chassis
+         identifier based on the value of ifName object (defined in
+         IETF RFC 2863) for an interface on the containing chassis.
+         The enumeration 'local(7)' represents a chassis identifier
+         based on a locally defined value."
+    SYNTAX      INTEGER { notSet(0), chassisComponent(1), 
+                    interfaceAlias(2), portComponent(3), macAddress(4), 
+                    networkAddress(5), interfaceName(6), local(7) }
+
+LldpChassisId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "250a"
+    STATUS      current
+    DESCRIPTION 
+        "This TC describes the format of a chassis identifier string.
+         Objects of this type are always used with an associated
+         LldpChassisIdSubtype object, which identifies the format of
+         the particular LldpChassisId object instance.
+         If the associated LldpChassisIdSubtype object has a value of
+         'chassisComponent(1)', then the octet string identifies
+         a particular instance of the entPhysicalAlias object
+         (defined in IETF RFC 2737) for a chassis component (i.e.,
+         an entPhysicalClass value of 'chassis(3)').
+         If the associated LldpChassisIdSubtype object has a value
+         of 'interfaceAlias(2)', then the octet string identifies
+         a particular instance of the ifAlias object (defined in
+         IETF RFC 2863) for an interface on the containing chassis.
+         If the particular ifAlias object does not contain any values,
+         another chassis identifier type should be used.
+         If the associated LldpChassisIdSubtype object has a value
+         of 'portComponent(3)', then the octet string identifies a
+         particular instance of the entPhysicalAlias object (defined
+         in IETF RFC 2737) for a port or backplane component within
+         the containing chassis.
+         If the associated LldpChassisIdSubtype object has a value of
+         'macAddress(4)', then this string identifies a particular
+         unicast source address (encoded in network byte order and
+         IEEE 802.3 canonical bit order), of a port on the containing
+         chassis as defined in IEEE Std 802-2001.
+         If the associated LldpChassisIdSubtype object has a value of
+         'networkAddress(5)', then this string identifies a particular
+         network address, encoded in network byte order, associated
+         with one or more ports on the containing chassis. The first
+         octet contains the IANA Address Family Numbers enumeration
+         value for the specific address type, and octets 2 through
+         N contain the network address value in network byte order.
+         If the associated LldpChassisIdSubtype object has a value
+         of 'interfaceName(6)', then the octet string identifies
+         a particular instance of the ifName object (defined in
+         IETF RFC 2863) for an interface on the containing chassis.
+         If the particular ifName object does not contain any values,
+         another chassis identifier type should be used.
+         If the associated LldpChassisIdSubtype object has a value of
+         'local(7)', then this string identifies a locally assigned
+         Chassis ID."
+    SYNTAX      OCTET STRING
+
+LldpPortIdSubtype ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "This TC describes the source of a particular type of port
+         identifier used in the LLDP MIB.
+         The enumeration 'interfaceAlias(1)' represents a port
+         identifier based on the ifAlias MIB object, defined in IETF
+         RFC 2863.
+         The enumeration 'portComponent(2)' represents a port
+         identifier based on the value of entPhysicalAlias (defined in
+         IETF RFC 2737) for a port component (i.e., entPhysicalClass
+         value of 'port(10)'), within the containing chassis.
+         The enumeration 'macAddress(3)' represents a port identifier
+         based on a unicast source address (encoded in network
+         byte order and IEEE 802.3 canonical bit order), which has
+         been detected by the agent and associated with a particular
+         port (IEEE Std 802-2001).
+         The enumeration 'networkAddress(4)' represents a port
+         identifier based on a network address, detected by the agent
+         and associated with a particular port.
+         The enumeration 'interfaceName(5)' represents a port
+         identifier based on the ifName MIB object, defined in IETF
+         RFC 2863.
+         The enumeration 'agentCircuitId(6)' represents a port
+         identifier based on the agent-local identifier of the circuit
+         (defined in RFC 3046), detected by the agent and associated
+         with a particular port.
+         The enumeration 'local(7)' represents a port identifier
+         based on a value locally assigned."
+    SYNTAX      INTEGER { notSet(0), interfaceAlias(1), portComponent(2), 
+                    macAddress(3), networkAddress(4), interfaceName(5), 
+                    agentCircuitId(6), local(7) }
+
+LldpPortId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "250a"
+    STATUS      current
+    DESCRIPTION 
+        "This TC describes the format of a port identifier string.
+         Objects of this type are always used with an associated
+         LldpPortIdSubtype object, which identifies the format of the
+         particular LldpPortId object instance.
+         If the associated LldpPortIdSubtype object has a value of
+         'interfaceAlias(1)', then the octet string identifies a
+         particular instance of the ifAlias object (defined in IETF
+         RFC 2863). If the particular ifAlias object does not contain
+         any values, another port identifier type should be used.
+         If the associated LldpPortIdSubtype object has a value of
+         'portComponent(2)', then the octet string identifies a
+         particular instance of the entPhysicalAlias object (defined
+         in IETF RFC 2737) for a port or backplane component.
+         If the associated LldpPortIdSubtype object has a value of
+         'macAddress(3)', then this string identifies a particular
+         unicast source address (encoded in network byte order
+         and IEEE 802.3 canonical bit order) associated with the port
+         (IEEE Std 802-2001).
+         If the associated LldpPortIdSubtype object has a value of
+         'networkAddress(4)', then this string identifies a network
+         address associated with the port. The first octet contains
+         the IANA AddressFamilyNumbers enumeration value for the
+         specific address type, and octets 2 through N contain the
+         networkAddress address value in network byte order.
+         If the associated LldpPortIdSubtype object has a value of
+         'interfaceName(5)', then the octet string identifies a
+         particular instance of the ifName object (defined in IETF
+         RFC 2863). If the particular ifName object does not contain
+         any values, another port identifier type should be used.
+         If the associated LldpPortIdSubtype object has a value of
+         'agentCircuitId(6)', then this string identifies a agent-local
+         identifier of the circuit (defined in RFC 3046).
+         If the associated LldpPortIdSubtype object has a value of
+         'local(7)', then this string identifies a locally
+         assigned port ID."
+    SYNTAX      OCTET STRING
+
+PrvtCfmMaintAssocName ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "45a"
+    STATUS      current
+    DESCRIPTION 
+        "Denotes a generic Maintenance Association Name. It is the
+         part of the Maintenance Association Identifier which is
+         unique within the Maintenance Domain Name and is appended
+         to the Maintenance Domain Name to form the Maintenance
+         Association Identifier (MAID).
+         
+         A PrvtCfmMaintAssocName value is always interpreted within
+         the context of a PrvtCfmMaintAssocNameType value. Every
+         usage of the PrvtCfmMaintAssocName textual convention is
+         required to specify the PrvtCfmMaintAssocNameType object
+         that provides the context. It is suggested that the
+         PrvtCfmMaintAssocNameType object be logically registered
+         before the object(s) that use the PrvtCfmMaintAssocName
+         textual convention, if they appear in the same logical row.
+         
+         The value of a PrvtCfmMaintAssocName object must
+         always be consistent with the value of the associated
+         PrvtCfmMaintAssocNameType object. Attempts to set
+         an PrvtCfmMaintAssocName object to a value inconsistent
+         with the associated PrvtCfmMaintAssocNameType must fail
+         with an inconsistentValue error.
+         
+         When this textual convention is used as the syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, IETF STD 58. In this
+         case, the object definition MUST include a 'SIZE' clause
+         to limit the number of potential instance sub-identifiers;
+         otherwise the applicable constraints MUST be stated in
+         the appropriate conceptual row DESCRIPTION clauses, or
+         in the surrounding documentation if there is no single
+         DESCRIPTION clause that is appropriate."
+    REFERENCE   
+        "802.1ag clauses 21.6.5.4, 21.6.5.5, 21.6.5.6"
+    SYNTAX      OCTET STRING (SIZE(1..22))
+
+PrvtCfmMaintAssocNameOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "22a"
+    STATUS      current
+    DESCRIPTION 
+        "Same as PrvtCfmMaintAssocName except that zero
+         length string represents no association name. "
+    SYNTAX      OCTET STRING (SIZE(0..22))
+
+PrvtCfmMhfCreation ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Indicates if the Management Entity can create MHFs.
+         The valid values are:
+         
+         defMHFnone(1) No MHFs can be created for this VID.
+         defMHFdefault(2) MHFs can be created on this VID on any
+         Bridge port through which this VID can
+         pass.
+         defMHFexplicit(3) MHFs can be created for this VID only on
+         Bridge ports through which this VID can
+         pass, and only if a MEP is created at some
+         lower MD Level.
+         defMHFdefer(4) The creation of MHFs is determined by the
+         corresponding Maintenance Domain variable
+         (prvtCfmMaMhfCreation)."
+    REFERENCE   
+        "802.1ag clause 12.14.5.1.3:c and 22.2.3"
+    SYNTAX      INTEGER { defMHFnone(1), defMHFdefault(2), 
+                    defMHFexplicit(3), defMHFdefer(4) }
+
+PrvtCfmMhfCreationDef ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Indicates if the Management Entity can create MHFs.
+         The valid values are:
+         
+         defMHFnone(1) No MHFs can be created for this VID.
+         defMHFdefault(2) MHFs can be created on this VID on any
+         Bridge port through which this VID can
+         pass.
+         defMHFexplicit(3) MHFs can be created for this VID only on
+         Bridge ports through which this VID can
+         pass, and only if a MEP is created at some
+         lower MD Level.
+         defMHFdefer(4) The creation of MHFs is determined by the
+         corresponding Maintenance Domain variable
+         (prvtCfmMaMhfCreation)."
+    REFERENCE   
+        "802.1ag clause 12.14.5.1.3:c and 22.2.3"
+    SYNTAX      INTEGER { defMHFnone(1), defMHFdefault(2), 
+                    defMHFexplicit(3) }
+
+PrvtCfmIdPermission ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Indicates what, if anything, is to be included in the Sender
+         ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid
+         values are:
+         
+         sendIdNone(1) The Sender ID TLV is not to be sent.
+         sendIdChassis(2) The Chassis ID Length, Chassis ID
+         Subtype, and Chassis ID fields of the
+         Sender ID TLV are to be sent.
+         sendIdManage(3) The Management Address Length and
+         Management Address of the Sender ID TLV
+         are to be sent.
+         sendIdChassisManage(4) The Chassis ID Length, Chassis ID
+         Subtype, Chassis ID, Management Address
+         Length and Management Address fields are
+         all to be sent.
+         sendIdDefer(5) The contents of the Sender ID TLV are
+         determined by the corresponding
+         Maintenance Domain variable
+         (prvtCfmMaIdPermission)."
+    REFERENCE   
+        "802.1ag clause 12.14.6.1.3:d and 21.5.3"
+    SYNTAX      INTEGER { sendIdNone(1), sendIdChassis(2), 
+                    sendIdManage(3), sendIdChassisManage(4), 
+                    sendIdDefer(5) }
+
+PrvtCfmIdPermissionDef ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Indicates what, if anything, is to be included in the Sender
+         ID TLV transmitted in CCMs, LBMs, LTMs, and LTRs. The valid
+         values are:
+         
+         sendIdNone(1) The Sender ID TLV is not to be sent.
+         sendIdChassis(2) The Chassis ID Length, Chassis ID
+         Subtype, and Chassis ID fields of the
+         Sender ID TLV are to be sent.
+         sendIdManage(3) The Management Address Length and
+         Management Address of the Sender ID TLV
+         are to be sent.
+         sendIdChassisManage(4) The Chassis ID Length, Chassis ID
+         Subtype, Chassis ID, Management Address
+         Length and Management Address fields are
+         all to be sent.
+         sendIdDefer(5) The contents of the Sender ID TLV are
+         determined by the corresponding
+         Maintenance Domain variable
+         (prvtCfmMaIdPermission)."
+    REFERENCE   
+        "802.1ag clause 12.14.6.1.3:d and 21.5.3"
+    SYNTAX      INTEGER { sendIdNone(1), sendIdChassis(2), 
+                    sendIdManage(3), sendIdChassisManage(4) }
+
+PrvtCfmMaintAssocNameType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "A value that represents a type (and thereby the format)
+         of a PrvtCfmMaintAssocName. The value can be one of
+         the following:
+         
+         ieeeReserved(0) Reserved for definition by IEEE 802.1
+         recommend to not use zero unless
+         absolutely needed.
+         primaryVid(1) Primary VLAN ID.
+         12 bits represented in a 2-octet integer:
+         - 4 least significant bits of the first
+         byte contains the 4 most significant
+         bits of the 12 bits primary VID
+         - second byte contains the 8 least
+         significant bits of the primary VID
+         
+         0 1 2 3 4 5 6 7 8
+         +-+-+-+-+-+-+-+-+
+         |0 0 0 0| (MSB) |
+         +-+-+-+-+-+-+-+-+
+         | VID LSB |
+         +-+-+-+-+-+-+-+-+
+         
+         charString(2) RFC2579 DisplayString, except that the
+         character codes 0-31 (decimal) are not
+         used. (1..45) octets
+         unsignedInt16 (3) 2-octet integer/big endian
+         rfc2865VpnId(4) RFC 2685 VPN ID
+         3 octet VPN authority Organizationally
+         Unique Identifier followed by 4 octet VPN
+         index identifying VPN according to the OUI:
+         
+         0 1 2 3 4 5 6 7 8
+         +-+-+-+-+-+-+-+-+
+         | VPN OUI (MSB) |
+         +-+-+-+-+-+-+-+-+
+         | VPN OUI |
+         +-+-+-+-+-+-+-+-+
+         | VPN OUI (LSB) |
+         +-+-+-+-+-+-+-+-+
+         |VPN Index (MSB)|
+         +-+-+-+-+-+-+-+-+
+         | VPN Index |
+         +-+-+-+-+-+-+-+-+
+         | VPN Index |
+         +-+-+-+-+-+-+-+-+
+         |VPN Index (LSB)|
+         +-+-+-+-+-+-+-+-+
+         
+         ieeeReserved(xx) Reserved for definition by IEEE 802.1
+         xx values can be [5..31] and [64..255]
+         ituReserved(xx) Reserved for definition by ITU-T Y.1731
+         xx values range from [32..63]
+         
+         To support future extensions, the PrvtCfmMaintAssocNameType
+         textual convention SHOULD NOT be sub-typed in object type
+         definitions. It MAY be sub-typed in compliance statements in
+         order to require only a subset of these address types for a
+         compliant implementation.
+         
+         Implementations must ensure that PrvtCfmMaintAssocNameType
+         objects and any dependent objects (e.g.,
+         PrvtCfmMaintAssocName objects) are consistent. An
+         inconsistentValue error must be generated if an attempt to
+         change an PrvtCfmMaintAssocNameType object would, for
+         example, lead to an undefined PrvtCfmMaintAssocName value.
+         In particular,
+         PrvtCfmMaintAssocNameType/PrvtCfmMaintAssocName pairs
+         must be changed together if the nameType changes.
+         
+         The Maintenance Domain name and Maintenance Association name,
+         when put together into the CCM PDU, MUST total 48 octets or
+         less. If the PrvtCfmMaintDomainNameType object contains
+         none(1), then the PrvtCfmMaintAssocName object MUST be
+         45 octets or less in length. Otherwise, the length of
+         the PrvtCfmMaintDomainName object plus the length of the
+         PrvtCfmMaintAssocName object, added together, MUST total
+         less than or equal to 44 octets."
+    REFERENCE   
+        "802.1ag clause 21.6.5.4, Table 21-20"
+    SYNTAX      INTEGER { primaryVid(1), charString(2), icc(32) }
+
+PrvtCfmCcmInterval ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the interval at which CCMs are sent by a MEP.
+         The possible values are:
+         -- intervalInvalid(0) No CCMs are sent (disabled).
+         interval300Hz(1) CCMs are sent every 3 1/3 milliseconds
+         (300Hz).
+         interval10ms(2) CCMs are sent every 10 milliseconds.
+         interval100ms(3) CCMs are sent every 100 milliseconds.
+         interval1s(4) CCMs are sent every 1 second.
+         interval10s(5) CCMs are sent every 10 seconds.
+         interval1min(6) CCMs are sent every minute.
+         interval10min(7) CCMs are sent every 10 minutes.
+         
+         Note: enumerations start at zero to match the 'CCM Interval
+         field' protocol field."
+    REFERENCE   
+        "802.1ag clauses 12.14.6.1.3:e, 20.8.1 and 21.6.1.3"
+    SYNTAX      INTEGER { interval300Hz(1), interval10ms(2), 
+                    interval100ms(3), interval1s(4), interval10s(5), 
+                    interval1min(6), interval10min(7) }
+
+PrvtCfmIndexIntegerNextFree ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "An integer which may be used as a new Index in a table.
+         
+         The special value of 0 indicates that no more new entries can
+         be created in the relevant table.
+         
+         When a MIB is used for configuration, an object with this
+         SYNTAX always contains a legal value (if non-zero) for an
+         index that is not currently used in the relevant table. The
+         Command Generator (Network Management Application) reads this
+         variable and uses the (non-zero) value read when creating a
+         new row with an SNMP SET. When the SET is performed, the
+         Command Responder (agent) must determine whether the value is
+         indeed still unused; Two Network Management Applications may
+         attempt to create a row (configuration entry) simultaneously
+         and use the same value. If it is currently unused, the SET
+         succeeds and the Command Responder (agent) changes the value
+         of this object, according to an implementation-specific
+         algorithm. If the value is in use, however, the SET fails.
+         The Network Management Application must then re-read this
+         variable to obtain a new usable value.
+         
+         An OBJECT-TYPE definition using this SYNTAX MUST specify the
+         relevant table for which the object is providing this
+         functionality."
+    SYNTAX      Unsigned32
+
+PrvtCfmMaintDomainNameType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "A value that represents a type (and thereby the format)
+         of a PrvtCfmMaintDomainName. The value can be one of
+         the following:
+         
+         ieeeReserved(0) Reserved for definition by IEEE 802.1
+         recommend to not use zero unless
+         absolutely needed.
+         none(1) No format specified, usually because
+         there is not (yet) a Maintenance
+         Domain Name. In this case, a zero
+         length OCTET STRING for the Domain
+         Name field is acceptable.
+         dnsLikeName(2) Domain Name like string, globally unique
+         text string derived from a DNS name.
+         macAddrAndUint(3) MAC address + 2-octet (unsigned) integer.
+         charString(4) RFC2579 DisplayString, except that the
+         character codes 0-31 (decimal) are not
+         used.
+         ieeeReserved(xx) Reserved for definition by IEEE 802.1
+         xx values can be [5..31] and [64..255]
+         ituReserved(xx) Reserved for definition by ITU-T Y.1731
+         xx values range from [32..63]
+         
+         To support future extensions, the PrvtCfmMaintDomainNameType
+         textual convention SHOULD NOT be sub-typed in object type
+         definitions. It MAY be sub-typed in compliance statements in
+         order to require only a subset of these address types for a
+         compliant implementation.
+         
+         Implementations must ensure that PrvtCfmMaintDomainNameType
+         objects and any dependent objects (e.g.,
+         PrvtCfmMaintDomainName objects) are consistent. An
+         inconsistentValue error must be generated if an attempt to
+         change an PrvtCfmMaintDomainNameType object would, for
+         example, lead to an undefined PrvtCfmMaintDomainName value.
+         In particular,
+         PrvtCfmMaintDomainNameType/PrvtCfmMaintDomainName pairs
+         must be changed together if the nameType changes."
+    REFERENCE   
+        "802.1ag clause 21.6.5, Table 21-19"
+    SYNTAX      INTEGER { none(1), charString(4) }
+
+PrvtCfmMaintDomainName ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "43a"
+    STATUS      current
+    DESCRIPTION 
+        "Denotes a generic Maintenance Domain Name.
+         
+         A PrvtCfmMaintDomainName value is always interpreted within
+         the context of a PrvtCfmMaintDomainNameType value. Every
+         usage of the PrvtCfmMaintDomainName textual convention is
+         required to specify the PrvtCfmMaintDomainNameType object
+         that provides the context. It is suggested that the
+         PrvtCfmMaintDomainNameType object be logically registered
+         before the object(s) that use the PrvtCfmMaintDomainName
+         textual convention, if they appear in the same logical row.
+         
+         The value of a PrvtCfmMaintDomainName object must always
+         be consistent with the value of the associated
+         PrvtCfmMaintDomainNameType object. Attempts to set
+         an PrvtCfmMaintDomainName object to a value inconsistent
+         with the associated PrvtCfmMaintDomainNameType must fail
+         with an inconsistentValue error.
+         
+         When this textual convention is used as the syntax of an
+         index object, there may be issues with the limit of 128
+         sub-identifiers specified in SMIv2, IETF STD 58. In this
+         case, the object definition MUST include a 'SIZE' clause
+         to limit the number of potential instance sub-identifiers;
+         otherwise the applicable constraints MUST be stated in
+         the appropriate conceptual row DESCRIPTION clauses, or
+         in the surrounding documentation if there is no single
+         DESCRIPTION clause that is appropriate.
+         
+         A value of none(1) in the associated
+         PrvtCfmMaintDomainNameType object means that no Maintenance
+         Domain name is present, and the contents of the
+         PrvtCfmMaintDomainName object are meaningless.
+         
+         See the DESCRIPTION of the PrvtCfmMaintAssocNameType
+         TEXTUAL-CONVENTION for a discussion of the length limits on
+         the Maintenance Domain name and Maintenance Association name."
+    REFERENCE   
+        "802.1ag clause 21.6.5"
+    SYNTAX      OCTET STRING (SIZE(1..22))
+
+PrvtCfmMaintDomainNameOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "22a"
+    STATUS      current
+    DESCRIPTION 
+        "Same as PrvtCfmMaintDomainName except that zero
+         length string represents no domain name."
+    SYNTAX      OCTET STRING (SIZE(0..22))
+
+PrvtCfmMDLevelTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Integer identifying the Maintenance Domain Level (MD Level).
+         Higher numbers correspond to higher Maintenance Domains,
+         those with the greatest physical reach, with the highest
+         values for customers' CFM PDUs. Lower numbers correspond
+         to lower Maintenance Domains, those with more limited
+         physical reach, with the lowest values for CFM PDUs
+         protecting single bridges or physical links."
+    REFERENCE   
+        "802.1ag clauses 18.3, 21.4.1"
+    SYNTAX      Integer32 (0..7)
+
+PrvtCfmMpDirection ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the direction in which the Maintenance
+         association (MEP or MIP) faces on the bridge port:
+         
+         down(1) Sends Continuity Check Messages away from the
+         MAC Relay Entity.
+         up(2) Sends Continuity Check Messages towards the
+         MAC Relay Entity."
+    REFERENCE   
+        "802.1ag clauses 12.14.6.3.2:c"
+    SYNTAX      INTEGER { down(1), up(2) }
+
+PrvtCfmMepIdOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Maintenance association End Point Identifier (MEPID): A small
+         integer, unique over a given Maintenance Association,
+         identifying a specific MEP.
+         
+         The special value 0 is allowed to indicate special cases, for
+         example that no MEPID is configured.
+         
+         Whenever an object is defined with this SYNTAX, then the
+         DESCRIPTION clause of such an object MUST specify what the
+         special value of 0 means."
+    REFERENCE   
+        "802.1ag clause 19.2.1"
+    SYNTAX      Unsigned32 (0..8191)
+
+PrvtCfmMepId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Maintenance association End Point Identifier (MEPID): A small
+         integer, unique over a given Maintenance Association,
+         identifying a specific MEP."
+    REFERENCE   
+        "802.1ag clauses 3.19 and 19.2.1"
+    SYNTAX      Unsigned32 (1..8191)
+
+PrvtCfmFngState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the diferent states of the MEP Fault Notification
+         Generator State Machine.
+         
+         fngReset(1) No defect has been present since the
+         prvtCfmMepFngResetTime timer
+         expired, or since the state machine
+         was last reset.
+         
+         fngDefect(2) A defect is present, but not for a
+         long enough time to be reported
+         (prvtCfmMepFngAlarmTime).
+         
+         fngReportDefect(3) A momentary state during which the
+         defect is reported by sending a
+         prvtCfmFaultAlarm notification,
+         if that action is enabled.
+         
+         fngDefectReported(4) A defect is present, and some defect
+         has been reported.
+         
+         fngDefectClearing(5) No defect is present, but the
+         prvtCfmMepFngResetTime timer has
+         not yet expired."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:f and 20.35"
+    SYNTAX      INTEGER { fngReset(1), fngDefect(2), fngReportDefect(3), 
+                    fngDefectReported(4), fngDefectClearing(5) }
+
+PrvtCfmLowestAlarmPri ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "An integer value specifying the lowest priority defect
+         that is allowed to generate a Fault Alarm (20.9.5), either:
+         
+         allDef(1) DefRDICCM, DefMACstatus, DefRemoteCCM,
+         DefErrorCCM, and DefXconCCM;
+         macRemErrXcon(2) Only DefMACstatus, DefRemoteCCM,
+         DefErrorCCM, and DefXconCCM (default);
+         remErrXcon(3) Only DefRemoteCCM, DefErrorCCM,
+         and DefXconCCM;
+         errXcon(4) Only DefErrorCCM and DefXconCCM;
+         xcon(5) Only DefXconCCM; or
+         noXcon(6) No defects DefXcon or lower are to be
+         reported;"
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:k and 20.9.5"
+    SYNTAX      INTEGER { allDef(1), macRemErrXcon(2), remErrXcon(3), 
+                    errXcon(4), xcon(5), noXcon(6) }
+
+PrvtCfmHighestDefectPri ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "An enumerated value, equal to the contents of the variable
+         highestDefect (20.33.9 and Table 20-1), indicating the
+         highest-priority defect that has been present since the MEP
+         Fault Notification Generator State Machine was last in the
+         FNG_RESET state, either:
+         
+         none(0) no defects since FNG_RESET
+         defRDICCM(1) DefRDICCM
+         defMACstatus(2) DefMACstatus
+         defRemoteCCM(3) DefRemoteCCM
+         defErrorCCM(4) DefErrorCCM
+         defXconCCM(5) DefXconCCM
+         
+         The value 0 is used for no defects so that additional higher
+         priority values can be added, if needed, at a later time, and
+         so that these values correspond with those in
+         PrvtCfmLowestAlarmPri."
+    REFERENCE   
+        "802.1ag clause 20.1.2, 12.14.7.7.2:c and 20.33.9"
+    SYNTAX      INTEGER { none(0), defRDICCM(1), defMACstatus(2), 
+                    defRemoteCCM(3), defErrorCCM(4), defXconCCM(5) }
+
+PrvtCfmRelayActionFieldValue ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Possible values the Relay action field can take."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:g, 20.36.2.5, 21.9.5, and
+         Table 21-27"
+    SYNTAX      INTEGER { rlyHit(1), rlyFdb(2), rlyMpdb(3) }
+
+PrvtCfmIngressActionFieldValue ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Possible values returned in the ingress action field."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:g, 20.36.2.6, 21.9.8.1, and
+         Table 21-30"
+    SYNTAX      INTEGER { ingOk(1), ingDown(2), ingBlocked(3), ingVid(4) }
+
+PrvtCfmEgressActionFieldValue ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Possible values returned in the egress action field"
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:o, 20.36.2.10, 21.9.9.1, and
+         Table 21-32"
+    SYNTAX      INTEGER { notSet(0), egrOK(1), egrDown(2), egrBlocked(3), 
+                    egrVid(4) }
+
+PrvtCfmRemoteMepState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Operational state of the remote MEP state machine. This
+         state machine monitors the reception of valid CCMs from a
+         remote MEP with a specific MEPID. It uses a timer that
+         expires in 3.5 times the length of time indicated by the
+         PrvtCfmMaCcmInterval object.
+         
+         rMepIdle(1) Momentary state during reset.
+         
+         rMepStart(2) The timer has not expired since the
+         state machine was reset, and no valid
+         CCM has yet been received.
+         
+         rMepFailed(3) The timer has expired, both since the
+         state machine was reset, and since a
+         valid CCM was received.
+         
+         rMepOk(4) The timer has not expired since a
+         valid CCM was received."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.6.3:b, 20.22"
+    SYNTAX      INTEGER { rMepIdle(1), rMepStart(2), rMepFailed(3), 
+                    rMepOk(4) }
+
+PrvtCfmPortStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "An enumerated value from he Port Status TLV from the last CCM
+         received from the last MEP. It indicates the ability of the
+         Bridge Port on which the transmitting MEP resides to pass
+         ordinary data, regardless of the status of the MAC
+         (Table 21-10).
+         
+         psNoPortStateTLV(0) Indicates either that no CCM has been
+         received or that no port status TLV was
+         present in the last CCM received.
+         
+         psBlocked(1) Ordinary data cannot pass freely through
+         the port on which the remote MEP resides.
+         Value of enableRmepDefect is equal to
+         false.
+         
+         psUp(2): Ordinary data can pass freely through
+         the port on which the remote MEP resides.
+         Value of enableRmepDefect is equal to
+         true.
+         
+         NOTE: A 0 value is used for psNoPortStateTLV, so that
+         additional code points can be added in a manner
+         consistent with the PrvtCfmInterfaceStatus textual
+         convention."
+    REFERENCE   
+        "802.1ag clause 12.14.7.6.3:f, 20.19.3 and 21.5.4"
+    SYNTAX      INTEGER { psNoPortStateTLV(0), psBlocked(1), psUp(2) }
+
+PrvtCfmInterfaceStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "An enumerated value from the Interface Status TLV from the
+         last CCM received from the last MEP. It indicates the status
+         of the Interface within which the MEP transmitting the CCM
+         is configured, or the next lower Interface in the Interface
+         Stack, if the MEP is not configured within an Interface.
+         
+         isNoInterfaceStatusTLV(0) Indicates either that no CCM has been
+         received or that no interface status TLV
+         was present in the last CCM received.
+         
+         isUp(1) The interface is ready to pass packets.
+         
+         isDown(2) The interface cannot pass packets
+         
+         isTesting(3) The interface is in some test mode.
+         
+         isUnknown(4) The interface status cannot be determined
+         for some reason.
+         
+         isDormant(5) The interface is not in a state to pass
+         packets but is in a pending state, waiting
+         for some external event.
+         
+         isNotPresent(6) Some component of the interface is missing
+         
+         isLowerLayerDown(7) The interface is down due to state of the
+         lower layer interfaces
+         
+         NOTE: A 0 value is used for isNoInterfaceStatusTLV, so that
+         these code points can be kept consistent with new code
+         points added to ifOperStatus in the IF-MIB."
+    REFERENCE   
+        "802.1ag clause 12.14.7.6.3:g, 20.19.4 and 21.5.5"
+    SYNTAX      INTEGER { isNoInterfaceStatusTLV(0), isUp(1), isDown(2), 
+                    isTesting(3), isUnknown(4), isDormant(5), 
+                    isNotPresent(6), isLowerLayerDown(7) }
+
+prvtCfmMIBNotifications OBJECT IDENTIFIER
+    ::= { prvtCfmMIB 0 }
+
+prvtCfmMIBObjects OBJECT IDENTIFIER
+    ::= { prvtCfmMIB 1 }
+
+prvtCfmUpdateInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Time between monitoring parameters update (in seconds).
+         A value of 0 suspends the monitoring task and a
+         value different from 0 resumes it. Default is 20 seconds."
+    ::= { prvtCfmMIBObjects 1 }
+
+prvtCfmShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to disable CFM, or to 'false', to enable."
+    ::= { prvtCfmMIBObjects 2 }
+
+prvtCfmStack OBJECT IDENTIFIER
+    ::= { prvtCfmMIBObjects 3 }
+
+prvtCfmStackTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmStackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "There is one CFM Stack table per bridge. It permits
+         the retrieval of information about the Maintenance Points
+         configured on any given interface."
+    REFERENCE   
+        "802.1ag clauses 12.14.2"
+    ::= { prvtCfmStack 1 }
+
+prvtCfmStackEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmStackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Stack table entry"
+    INDEX       { prvtCfmStackInterfaceIndex, 
+                  prvtCfmStackServiceIdOrNone, prvtCfmStackMdLevel, 
+                  prvtCfmStackDirection }
+    ::= { prvtCfmStackTable 1 }
+
+PrvtCfmStackEntry ::= SEQUENCE {
+    prvtCfmStackInterfaceIndex      InterfaceIndex,
+    prvtCfmStackServiceIdOrNone     Unsigned32,
+    prvtCfmStackMdLevel             PrvtCfmMDLevelTC,
+    prvtCfmStackDirection           PrvtCfmMpDirection,
+    prvtCfmStackMdName              PrvtCfmMaintDomainNameOrNone,
+    prvtCfmStackMaName              PrvtCfmMaintAssocNameOrNone,
+    prvtCfmStackMepId               Unsigned32,
+    prvtCfmStackMacAddress          MacAddress
+}
+
+prvtCfmStackInterfaceIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This object represents the Bridge Port or aggregated port
+         on which MEPs or MHFs might be configured.
+         
+         Upon a restart of the system, the system SHALL, if necessary,
+         change the value of this variable, and rearrange the
+         prvtCfmStackTable, so that it indexes the entry in the
+         interface table with the same value of ifAlias that it
+         indexed before the system restart. If no such entry exists,
+         then the system SHALL delete all entries in the
+         prvtCfmStackTable with the interface index."
+    REFERENCE   
+        "802.1ag clause 12.14.2.1.2:a"
+    ::= { prvtCfmStackEntry 1 }
+
+prvtCfmStackServiceIdOrNone OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "VLAN ID to which the MP is attached, or 0, if none."
+    REFERENCE   
+        "802.1ag clause 12.14.2.1.2:d"
+    ::= { prvtCfmStackEntry 2 }
+
+prvtCfmStackMdLevel OBJECT-TYPE
+    SYNTAX      PrvtCfmMDLevelTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "MD Level of the Maintenance Point."
+    REFERENCE   
+        "802.1ag clause 12.14.2.1.2:b"
+    ::= { prvtCfmStackEntry 3 }
+
+prvtCfmStackDirection OBJECT-TYPE
+    SYNTAX      PrvtCfmMpDirection
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Direction in which the MP faces on the Bridge Port"
+    REFERENCE   
+        "802.1ag clause 12.14.2.1.2:c"
+    ::= { prvtCfmStackEntry 4 }
+
+prvtCfmStackMdName OBJECT-TYPE
+    SYNTAX      PrvtCfmMaintDomainNameOrNone
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The index of the Maintenance Domain in the prvtCfmMdTable
+         to which the MP is associated, or zero-length, if none."
+    REFERENCE   
+        "802.1ag clause 12.14.2.1.3:b"
+    ::= { prvtCfmStackEntry 5 }
+
+prvtCfmStackMaName OBJECT-TYPE
+    SYNTAX      PrvtCfmMaintAssocNameOrNone
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The index of the MA in the prvtCfmMaTable
+         to which the MP is associated, or zero-length, if none."
+    REFERENCE   
+        "802.1ag clause 12.14.2.1.3:c"
+    ::= { prvtCfmStackEntry 6 }
+
+prvtCfmStackMepId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "If an MEP is configured, the MEPID, else 0"
+    REFERENCE   
+        "802.1ag clause 12.14.2.1.3:d"
+    ::= { prvtCfmStackEntry 7 }
+
+prvtCfmStackMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "MAC address of the MP."
+    REFERENCE   
+        "802.1ag clause 12.14.2.1.3:e"
+    ::= { prvtCfmStackEntry 8 }
+
+prvtCfmMd OBJECT IDENTIFIER
+    ::= { prvtCfmMIBObjects 4 }
+
+prvtCfmMdTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmMdEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Maintenance Domain table. Each row in the table
+         represents a different Maintenance Domain.
+         
+         A Maintenance Domain is described in 802.1ag (3.22) as the
+         network or the part of the network for which faults in
+         connectivity are to be managed. The boundary of a Maintenance
+         Domain is defined by a set of DSAPs, each of which can become
+         a point of connectivity to a service instance."
+    REFERENCE   
+        "802.1ag clauses 3.22 and 18.1"
+    ::= { prvtCfmMd 2 }
+
+prvtCfmMdEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmMdEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Maintenance Domain table entry. This entry is not lost
+         upon reboot. It is backed up by stable storage."
+    INDEX       { prvtCfmMdName }
+    ::= { prvtCfmMdTable 1 }
+
+PrvtCfmMdEntry ::= SEQUENCE {
+    prvtCfmMdName               PrvtCfmMaintDomainName,
+    prvtCfmMdRowStatus          RowStatus,
+    prvtCfmMdLevel              PrvtCfmMDLevelTC,
+    prvtCfmMdFormat             PrvtCfmMaintDomainNameType,
+    prvtCfmMdMhfCreation        PrvtCfmMhfCreationDef,
+    prvtCfmMdMhfIdPermission    PrvtCfmIdPermissionDef
+}
+
+prvtCfmMdName OBJECT-TYPE
+    SYNTAX      PrvtCfmMaintDomainName
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Maintenance Domain name.
+         
+         Each Maintenance Domain has unique name amongst all those
+         used or available to a service provider or operator. It
+         facilitates easy identification of administrative
+         responsibility for each Maintenance Domain.
+         
+         Clause 3.24 defines a Maintenance Domain name as the
+         identifier, unique over the domain for which CFM is to
+         protect against accidental concatenation of Service
+         Instances, of a particular Maintenance Domain."
+    REFERENCE   
+        "802.1ag clauses 3.24, 12.14.5, and 21.6.5.3"
+    ::= { prvtCfmMdEntry 1 }
+
+prvtCfmMdRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The status of the row.
+         
+         The writable columns in a row can not be changed if the row
+         is active. All columns must have a valid value before a row
+         can be activated."
+    ::= { prvtCfmMdEntry 2 }
+
+prvtCfmMdLevel OBJECT-TYPE
+    SYNTAX      PrvtCfmMDLevelTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Maintenance Domain Level."
+    REFERENCE   
+        "802.1ag clause 12.14.5.1.3:b"
+    ::= { prvtCfmMdEntry 4 }
+
+prvtCfmMdFormat OBJECT-TYPE
+    SYNTAX      PrvtCfmMaintDomainNameType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The type (and thereby format) of the Maintenance Domain Name."
+    REFERENCE   
+        "802.1ag clause 21.6.5.1"
+    ::= { prvtCfmMdEntry 5 }
+
+prvtCfmMdMhfCreation OBJECT-TYPE
+    SYNTAX      PrvtCfmMhfCreationDef
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enumerated value indicating whether the management entity can
+         create MHFs (MIP Half Function) for this Maintenance Domain.
+         Since, in this variable, there is no encompassing Maintenance
+         Domain, the value defMHFdefer is not allowed."
+    REFERENCE   
+        "802.1ag clause 12.14.5.1.3:c"
+    ::= { prvtCfmMdEntry 6 }
+
+prvtCfmMdMhfIdPermission OBJECT-TYPE
+    SYNTAX      PrvtCfmIdPermissionDef
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enumerated value indicating what, if anything, is to be
+         included in the Sender ID TLV (21.5.3) transmitted by MPs
+         configured in this Maintenance Domain. Since, in this
+         variable, there is no encompassing Maintenance Domain, the
+         value sendIdDefer is not allowed."
+    REFERENCE   
+        "802.1ag clause 12.14.5.1.3:d"
+    ::= { prvtCfmMdEntry 7 }
+
+prvtCfmMa OBJECT IDENTIFIER
+    ::= { prvtCfmMIBObjects 5 }
+
+prvtCfmMaTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmMaEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Maintenance Association table. Each row in the table
+         represents an MA. An MA is a set of MEPs, each configured
+         with a single service instance.
+         
+         The writable objects in this table need to be persistent
+         upon reboot or restart of a device.
+         
+         Table includes extra variables needed for Y.1731
+         support and service awareness"
+    ::= { prvtCfmMa 1 }
+
+prvtCfmMaEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmMaEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtCfmMaEntry"
+    INDEX       { prvtCfmMdName, prvtCfmMaName }
+    ::= { prvtCfmMaTable 1 }
+
+PrvtCfmMaEntry ::= SEQUENCE {
+    prvtCfmMaName               PrvtCfmMaintAssocName,
+    prvtCfmMaRowStatus          RowStatus,
+    prvtCfmMaServiceId          Unsigned32,
+    prvtCfmMaVlanId             Integer32,
+    prvtCfmMaMhfCreation        PrvtCfmMhfCreation,
+    prvtCfmMaPermission         PrvtCfmIdPermission,
+    prvtCfmMaFormat             PrvtCfmMaintAssocNameType,
+    prvtCfmMaCcmInterval        PrvtCfmCcmInterval,
+    prvtCfmMaAisLckReceive      TruthValue,
+    prvtCfmMaAisLckLevel        Unsigned32,
+    prvtCfmMaAisLckInterval     INTEGER,
+    prvtCfmMaAisLckPriority     Unsigned32,
+    prvtCfmMaClearConnectivity  Unsigned32
+}
+
+prvtCfmMaName OBJECT-TYPE
+    SYNTAX      PrvtCfmMaintAssocName
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Short Maintenance Association name.
+         
+         This name must be unique within a maintenance domain."
+    REFERENCE   
+        "802.1ag clauses 21.6.5.6, and Table 21-20"
+    ::= { prvtCfmMaEntry 1 }
+
+prvtCfmMaRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The status of the row.
+         The writable columns in a row can not be changed if the row
+         is active. All columns must have a valid value before a row
+         can be activated."
+    ::= { prvtCfmMaEntry 2 }
+
+prvtCfmMaServiceId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967294)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The primary service ID attached to this MA"
+    ::= { prvtCfmMaEntry 4 }
+
+prvtCfmMaVlanId OBJECT-TYPE
+    SYNTAX      Integer32 (1..4094)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The primary vlan ID attached to this MA"
+    ::= { prvtCfmMaEntry 5 }
+
+prvtCfmMaMhfCreation OBJECT-TYPE
+    SYNTAX      PrvtCfmMhfCreation
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates if the Management entity can create MHFs
+         (MIP Half Function) for this MA."
+    REFERENCE   
+        "802.1ag clause 12.14.6.1.3:c"
+    ::= { prvtCfmMaEntry 6 }
+
+prvtCfmMaPermission OBJECT-TYPE
+    SYNTAX      PrvtCfmIdPermission
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enumerated value indicating what, if anything, is to be
+         included in the Sender ID TLV (21.5.3) transmitted by MPs
+         configured in this MA."
+    REFERENCE   
+        "802.1ag clause 12.14.6.1.3:d"
+    ::= { prvtCfmMaEntry 7 }
+
+prvtCfmMaFormat OBJECT-TYPE
+    SYNTAX      PrvtCfmMaintAssocNameType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The type (and thereby format) of the
+         Maintenance Association Name."
+    REFERENCE   
+        "802.1ag clauses 21.6.5.4"
+    ::= { prvtCfmMaEntry 8 }
+
+prvtCfmMaCcmInterval OBJECT-TYPE
+    SYNTAX      PrvtCfmCcmInterval
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Interval between CCM transmissions to be
+         used by all MEPs in the MA."
+    REFERENCE   
+        "802.1ag clause 12.14.6.1.3:e"
+    ::= { prvtCfmMaEntry 9 }
+
+prvtCfmMaAisLckReceive OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Turn the AIS & LCK features on/off."
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 clauses 7.4 and 7.6"
+    ::= { prvtCfmMaEntry 10 }
+
+prvtCfmMaAisLckLevel OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MD level at which AIS & LCK frames will be sent."
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 clauses 7.4 and 7.6"
+    ::= { prvtCfmMaEntry 11 }
+
+prvtCfmMaAisLckInterval OBJECT-TYPE
+    SYNTAX      INTEGER { interval1s(1), interval1min(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The time interval at which AIS and LCK frames will be sent"
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 clauses 7.4 and 7.6"
+    ::= { prvtCfmMaEntry 12 }
+
+prvtCfmMaAisLckPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "COS parameter for the outgoing AIS & LCK frames."
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 clauses 7.4 and 7.6"
+    ::= { prvtCfmMaEntry 13 }
+
+prvtCfmMaClearConnectivity OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ID of the MEP to be cleared from the MEP table, or 0 for all"
+    ::= { prvtCfmMaEntry 15 }
+
+prvtCfmMep OBJECT IDENTIFIER
+    ::= { prvtCfmMIBObjects 6 }
+
+prvtCfmMepTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmMepEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Maintenance Association End Point (MEP) table.
+         
+         Each row in the table represents a different MEP. A MEP is
+         an actively managed CFM entity, associated with a specific
+         DSAP of a Service Instance, which can generate and receive
+         CFM PDUs and track any responses. It is an end point of a
+         single Maintenance Association, and is an endpoint of a
+         separate Maintenance Entity for each of the other MEPs in
+         the same Maintenance Association (802.1ag clause 3.18).
+         
+         This table uses three indices. The first two indices are the
+         indices of the Maintenance Domain and MA tables, the reason
+         being that a MEP is always related to an MA and Maintenance
+         Domain.
+         
+         The MEP table also stores all the managed objects for sending
+         LBM and LTM.
+         
+         *LBM Managed objects
+         
+         LBM Managed objects in the MEP table
+         enables the management entity to initiate
+         transmission of Loopback messages. It will signal the MEP
+         that it should transmit some number of Loopback messages
+         and detect the detection (or lack thereof) of the
+         corresponding Loopback messages.
+         
+         Steps to use entries in this table:
+         
+         1) Set prvtCfmMepTransmitLbmStatus to true
+         2) Set the target by:
+         a) target mep - configue prvtCfmMepTransmitLbmDestIsMepId
+         on true and then configure prvtCfmMepTransmitLbmDestMepId with
+         the remote mep id
+         b) target mac - configue prvtCfmMepTransmitLbmDestIsMepId
+         on false and then configure prvtCfmMepTransmitLbmDestMacAddress
+         with the remote device mac address
+         3) Setup the different data to be sent (number of messages,
+         optional TLVs,...).
+         4) Record the current values of prvtCfmMepLbrIn,
+         prvtCfmMepLbrInOutOfOrder, and prvtCfmMepLbrBadMsdu.
+         6) Change prvtCfmMepTransmitLbmStatus value to false
+         to initiate transmission of Loopback messages.
+         7) Check the value of prvtCfmMepTransmitLbmResultOK to
+         find out if the operation was successfully initiated or
+         not.
+         8) If prvtCfmMepTransmitLbmInfinite is set to false you can
+         monitor the value of prvtCfmMepTransmitLbmRemainingMessages.
+         When it reaches 0, the last LBM has been transmitted and
+         the operation is finished.
+         Wait an additional 5 seconds to ensure that all LBRs have
+         been returned.
+         9) If prvtCfmMepTransmitLbmInfinite is set to true you must stop
+         the operation yourself by setting prvtCfmMepTransmitLbmStatus to true.
+         10) Compare prvtCfmMepLbrIn, prvtCfmMepLbrInOutOfOrder,
+         and prvtCfmMepLbrBadMsdu to their old values from step
+         4, above, to get the results of the test.
+         
+         
+         *LTM Managed objects
+         The LTM Managed objects in the MEP table are used in a manner
+         similar to that described for LBM transmission, above. Upon
+         successfully initiating the transmission, the variables
+         pvrtCfmMepTransmitLtmSeqNumber and
+         prvtCfmMepTransmitLtmEgressIdentifier return the information
+         required to recover the results of the LTM from the
+         prvtCfmLtrTable."
+    REFERENCE   
+        "802.1ag clauses 12.14.7 and 19.2"
+    ::= { prvtCfmMep 1 }
+
+prvtCfmMepEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmMepEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtCfmMepEntry"
+    INDEX       { prvtCfmMdName, prvtCfmMaName, prvtCfmMepIdentifier }
+    ::= { prvtCfmMepTable 1 }
+
+PrvtCfmMepEntry ::= SEQUENCE {
+    prvtCfmMepIdentifier                    PrvtCfmMepId,
+    prvtCfmMepRowStatus                     RowStatus,
+    prvtCfmMepInterfaceIndex                InterfaceIndex,
+    prvtCfmMepDirection                     PrvtCfmMpDirection,
+    prvtCfmMepShutdown                      TruthValue,
+    prvtCfmMepFngState                      PrvtCfmFngState,
+    prvtCfmMepCciEnabled                    TruthValue,
+    prvtCfmMepCcmLtmPriority                Unsigned32,
+    prvtCfmMepMacAddress                    MacAddress,
+    prvtCfmMepLowPrDef                      PrvtCfmLowestAlarmPri,
+    prvtCfmMepHighestPrDefect               PrvtCfmHighestDefectPri,
+    prvtCfmMepDefects                       BITS,
+    prvtCfmMepErrorCcmLastFailure           OCTET STRING,
+    prvtCfmMepXconCcmLastFailure            OCTET STRING,
+    prvtCfmMepCcmSequenceErrors             Counter32,
+    prvtCfmMepCciSentCcms                   Counter32,
+    prvtCfmMepNextLbmTransId                Unsigned32,
+    prvtCfmMepLbrIn                         Counter32,
+    prvtCfmMepLbrInOutOfOrder               Counter32,
+    prvtCfmMepLbrBadMsdu                    Counter32,
+    prvtCfmMepLtmNextSeqNumber              Unsigned32,
+    prvtCfmMepUnexpLtrIn                    Counter32,
+    prvtCfmMepLbrOut                        Counter32,
+    prvtCfmMepTransmitLbmStatus             TruthValue,
+    prvtCfmMepTransmitLbmDestMacAddress     MacAddress,
+    prvtCfmMepTransmitLbmDestMepId          PrvtCfmMepIdOrZero,
+    prvtCfmMepTransmitLbmDestIsMepId        TruthValue,
+    prvtCfmMepTransmitLbmMessages           Integer32,
+    prvtCfmMepTransmitLbmDataTlv            OCTET STRING,
+    prvtCfmMepTransmitLbmVlanPriority       Integer32,
+    prvtCfmMepTransmitLbmVlanDropEnable     TruthValue,
+    prvtCfmMepTransmitLbmResultOK           TruthValue,
+    prvtCfmMepTransmitLbmSeqNumber          Unsigned32,
+    prvtCfmMepTransmitLtmStatus             TruthValue,
+    prvtCfmMepTransmitLtmFlags              BITS,
+    prvtCfmMepTransmitLtmTargetMacAddress   MacAddress,
+    prvtCfmMepTransmitLtmTargetMepId        PrvtCfmMepIdOrZero,
+    prvtCfmMepTransmitLtmTargetIsMepId      TruthValue,
+    prvtCfmMepTransmitLtmTtl                Unsigned32,
+    prvtCfmMepTransmitLtmResult             TruthValue,
+    prvtCfmMepTransmitLtmSeqNumber          Unsigned32,
+    prvtCfmMepTransmitLtmEgressIdentifier   OCTET STRING,
+    prvtCfmMepAlarmSupressed                TruthValue,
+    prvtCfmMepAisCondition                  TruthValue,
+    prvtCfmMepLckCondition                  TruthValue,
+    prvtCfmMepAisLifetime                   INTEGER,
+    prvtCfmMepLckLifetime                   INTEGER,
+    prvtCfmMepTransmitMcastLbm              TruthValue,
+    prvtCfmMepTransmitLbmInfinite           TruthValue,
+    prvtCfmMepTransmitLbmDelay              Unsigned32,
+    prvtCfmMepTransmitLbmTimeout            Unsigned32,
+    prvtCfmMepTransmitLtmTimeout            Unsigned32,
+    prvtCfmMepTransmitLbmSentPkts           Unsigned32,
+    prvtCfmMepTransmitLbmSuccessRate        Unsigned32,
+    prvtCfmMepTransmitLbmMinTime            Unsigned32,
+    prvtCfmMepTransmitLbmAvgTime            Unsigned32,
+    prvtCfmMepTransmitLbmMaxTime            Unsigned32,
+    prvtCfmMepFngAlarmTime                  Unsigned32,
+    prvtCfmMepFngResetTime                  Unsigned32,
+    prvtCfmMepTransmitLbmRemainingMessages  Integer32,
+    prvtCfmMepTransmitLbmCurrentStatus      TruthValue
+}
+
+prvtCfmMepIdentifier OBJECT-TYPE
+    SYNTAX      PrvtCfmMepId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Integer that is unique among all the MEPs in the same MA.
+         Other definition is: a small integer, unique over a given
+         Maintenance Association, identifying a specific Maintenance
+         association End Point (3.19).
+         
+         MEP Identifier is also known as the MEPID."
+    REFERENCE   
+        "802.1ag clauses 3.19, 19.2 and 12.14.7"
+    ::= { prvtCfmMepEntry 1 }
+
+prvtCfmMepRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The status of the row.
+         
+         The writable columns in a row can not be changed if the row
+         is active. All columns must have a valid value before a row
+         can be activated."
+    ::= { prvtCfmMepEntry 2 }
+
+prvtCfmMepInterfaceIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is the interface index (from ifTable) of either
+         a bridge port, or an aggregated IEEE 802.1 link,
+         to which the MEP is attached."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:b"
+    ::= { prvtCfmMepEntry 3 }
+
+prvtCfmMepDirection OBJECT-TYPE
+    SYNTAX      PrvtCfmMpDirection
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The direction in which the MEP faces on the Bridge port."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:c and 19.2"
+    ::= { prvtCfmMepEntry 4 }
+
+prvtCfmMepShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administrative state of the MEP
+         The value 'true' will shutdown/disable the MEP.
+         The value 'false' will enable the MEP."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:e and 20.9.1"
+    ::= { prvtCfmMepEntry 5 }
+
+prvtCfmMepFngState OBJECT-TYPE
+    SYNTAX      PrvtCfmFngState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Current state of the MEP Fault Notification Generator
+         State Machine."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:f and 20.35"
+    ::= { prvtCfmMepEntry 6 }
+
+prvtCfmMepCciEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If set to true, the MEP will generate CCM messages."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:g and 20.10.1"
+    ::= { prvtCfmMepEntry 7 }
+
+prvtCfmMepCcmLtmPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The priority value for CCMs and LTMs transmitted by the MEP.
+         Default Value is the highest priority value allowed to pass
+         through the bridge port for any of this MEPs VIDs.
+         The management entity can obtain the default value for this
+         variable from the priority regeneration table by extracting the
+         highest priority value in this table on this MEPs bridge port.
+         (1 is lowest, then 2, then 0, then 3-7)."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:h"
+    ::= { prvtCfmMepEntry 8 }
+
+prvtCfmMepMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "MAC address of the MEP."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:i and 19.4"
+    ::= { prvtCfmMepEntry 9 }
+
+prvtCfmMepLowPrDef OBJECT-TYPE
+    SYNTAX      PrvtCfmLowestAlarmPri
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An integer value specifying the lowest priority defect
+         that is allowed to generate fault alarm."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:k and 20.9.5 and Table 20-1"
+    ::= { prvtCfmMepEntry 10 }
+
+prvtCfmMepHighestPrDefect OBJECT-TYPE
+    SYNTAX      PrvtCfmHighestDefectPri
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The highest priority defect that has been present since the
+         MEPs Fault Notification Generator State Machine was last in
+         the FNG_RESET state."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:n 20.33.9 and Table 21-1"
+    ::= { prvtCfmMepEntry 11 }
+
+prvtCfmMepDefects OBJECT-TYPE
+    SYNTAX      BITS { bDefRDICCM(0), bDefMACstatus(1), bDefRemoteCCM(2), 
+                    bDefErrorCCM(3), bDefXconCCM(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A vector of Boolean error conditions from Table 20-1, any of
+         which may be true."
+    REFERENCE   
+        ".1ag clauses 12.14.7.1.3:o, 12.14.7.1.3:p, 12.14.7.1.3:q,
+         12.14.7.1.3:r, 12.14.7.1.3:s, 20.21.3, 20.23.3, 20.33.5,
+         20.33.6, 20.33.7."
+    ::= { prvtCfmMepEntry 12 }
+
+prvtCfmMepErrorCcmLastFailure OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The last-received CCM that triggered an DefErrorCCM fault."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:t and 20.21.2"
+    ::= { prvtCfmMepEntry 13 }
+
+prvtCfmMepXconCcmLastFailure OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The last-received CCM that triggered a DefXconCCM fault."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:u and 20.23.2"
+    ::= { prvtCfmMepEntry 14 }
+
+prvtCfmMepCcmSequenceErrors OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of out-of-sequence CCMs received from all
+         remote MEPs."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:v and 20.16.12"
+    ::= { prvtCfmMepEntry 15 }
+
+prvtCfmMepCciSentCcms OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of Continuity Check messages transmitted."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:w and 20.10.2"
+    ::= { prvtCfmMepEntry 16 }
+
+prvtCfmMepNextLbmTransId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Next sequence number/transaction identifier to be sent in a
+         Loopback message. This sequence number can be zero because
+         it wraps around."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:x and 20.28.2"
+    ::= { prvtCfmMepEntry 17 }
+
+prvtCfmMepLbrIn OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of valid, in-order Loopback Replies received."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:y and 20.31.1"
+    ::= { prvtCfmMepEntry 18 }
+
+prvtCfmMepLbrInOutOfOrder OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of valid, out-of-order Loopback Replies
+         received."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:z and 20.31.1"
+    ::= { prvtCfmMepEntry 19 }
+
+prvtCfmMepLbrBadMsdu OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of LBRs received whose
+         mac_service_data_unit did not match (except for the OpCode)
+         that of the corresponding LBM (20.2.3)."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:aa 20.2.3"
+    ::= { prvtCfmMepEntry 20 }
+
+prvtCfmMepLtmNextSeqNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Next transaction identifier/sequence number to be sent in a
+         Linktrace message. This sequence number can be zero because
+         it wraps around."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:ab and 20.36.1"
+    ::= { prvtCfmMepEntry 21 }
+
+prvtCfmMepUnexpLtrIn OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of unexpected LTRs received (20.39.1)."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:ac 20.39.1"
+    ::= { prvtCfmMepEntry 22 }
+
+prvtCfmMepLbrOut OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of Loopback Replies transmitted."
+    REFERENCE   
+        "802.1ag clause 12.14.7.1.3:ad and 20.26.2"
+    ::= { prvtCfmMepEntry 23 }
+
+prvtCfmMepTransmitLbmStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A Boolean flag set to true by the bridge port to indicate
+         that another LBM may be transmitted.
+         Reset to false by the MEP Loopback Initiator State Machine."
+    ::= { prvtCfmMepEntry 24 }
+
+prvtCfmMepTransmitLbmDestMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Target MAC Address Field to be transmitted: A unicast
+         destination MAC address.
+         This address will be used if the value of the column
+         prvtCfmMepTransmitLbmDestIsMepId is 'false'."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.2:b"
+    ::= { prvtCfmMepEntry 25 }
+
+prvtCfmMepTransmitLbmDestMepId OBJECT-TYPE
+    SYNTAX      PrvtCfmMepIdOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Maintenance association End Point Identifier of another
+         MEP in the same Maintenance Association to which the LBM is
+         to be sent.
+         This address will be used if the value of the column
+         prvtCfmMepTransmitLbmDestIsMepId is 'true'."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.2:b"
+    ::= { prvtCfmMepEntry 26 }
+
+prvtCfmMepTransmitLbmDestIsMepId OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "True indicates that MEPID of the target MEP is used for
+         Loopback transmission.
+         False indicates that unicast destination MAC address of the
+         target MEP is used for Loopback transmission."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.2:b"
+    ::= { prvtCfmMepEntry 27 }
+
+prvtCfmMepTransmitLbmMessages OBJECT-TYPE
+    SYNTAX      Integer32 (1..1024)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The number of Loopback messages to be transmitted."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.2:c"
+    ::= { prvtCfmMepEntry 28 }
+
+prvtCfmMepTransmitLbmDataTlv OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..1462))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary amount of data to be included in the Data TLV,
+         if the Data TLV is selected to be sent."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.2:d"
+    ::= { prvtCfmMepEntry 29 }
+
+prvtCfmMepTransmitLbmVlanPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Priority. 3 bit value to be used in the VLAN tag, if present
+         in the transmitted frame.
+         
+         The default value is CCM priority."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.2:e"
+    ::= { prvtCfmMepEntry 30 }
+
+prvtCfmMepTransmitLbmVlanDropEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Drop Enable bit value to be used in the VLAN tag, if present
+         in the transmitted frame.
+         
+         For more information about VLAN Drop Enable, please check
+         IEEE 802.1ad."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.2:e"
+    ::= { prvtCfmMepEntry 31 }
+
+prvtCfmMepTransmitLbmResultOK OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the result of the operation:
+         
+         - true The Loopback Message(s) will be
+         (or has been) sent.
+         - false The Loopback Message(s) will not
+         be sent."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.3:a"
+    ::= { prvtCfmMepEntry 32 }
+
+prvtCfmMepTransmitLbmSeqNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Loopback Transaction Identifier
+         (prvtCfmMepNextLbmTransId) of the first LBM (to be) sent.
+         The value returned is undefined if
+         prvtCfmMepTransmitLbmResultOK is false."
+    REFERENCE   
+        "802.1ag clause 12.14.7.3.3:a"
+    ::= { prvtCfmMepEntry 33 }
+
+prvtCfmMepTransmitLtmStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A Boolean flag set to true by the bridge port to indicate
+         that another LTM may be transmitted.
+         In order to start linktrace following step should be executed:
+         1.Verify CFM connectivity
+         2.Set prvtCfmMepTransmitLtmTargetIsMepId to TRUE (if using target Mep)
+         3.Set prvtCfmMepTransmitLtmTargetMepId with the remote Mep Id
+         4.Set prvtCfmMepTransmitLtmTimeout (timeout for LTM packets)
+         5.Set prvtCfmMepTransmitLtmStatus to TRUE"
+    ::= { prvtCfmMepEntry 34 }
+
+prvtCfmMepTransmitLtmFlags OBJECT-TYPE
+    SYNTAX      BITS { useFDBonly(0) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The flags field for LTMs transmitted by the MEP."
+    REFERENCE   
+        "802.1ag clause 12.14.7.4.2:b and 20.37.1"
+    ::= { prvtCfmMepEntry 35 }
+
+prvtCfmMepTransmitLtmTargetMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Target MAC Address Field to be transmitted: A unicast
+         destination MAC address.
+         This address will be used if the value of the column
+         prvtCfmMepTransmitLtmTargetIsMepId is 'false'."
+    REFERENCE   
+        "802.1ag clause 12.14.7.4.2:c"
+    ::= { prvtCfmMepEntry 36 }
+
+prvtCfmMepTransmitLtmTargetMepId OBJECT-TYPE
+    SYNTAX      PrvtCfmMepIdOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An indication of the Target MAC Address Field to be
+         transmitted:
+         The Maintenance association End Point Identifier of
+         another MEP in the same Maintenance Association
+         This address will be used if the value of the column
+         prvtCfmMepTransmitLtmTargetIsMepId is 'true'."
+    REFERENCE   
+        "802.1ag clause 12.14.7.4.2:c"
+    ::= { prvtCfmMepEntry 37 }
+
+prvtCfmMepTransmitLtmTargetIsMepId OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "True indicates that MEPID of the target MEP is used for
+         Linktrace transmission.
+         False indicates that unicast destination MAC address of the
+         target MEP is used for Loopback transmission."
+    REFERENCE   
+        "802.1ag clause 12.14.7.4.2:c"
+    ::= { prvtCfmMepEntry 38 }
+
+prvtCfmMepTransmitLtmTtl OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The LTM TTL field. Default value, if not specified, is 64.
+         The TTL field indicates the number of hops remaining to the
+         LTM. Decremented by 1 by each Linktrace Responder that
+         handles the LTM. The value returned in the LTR is one less
+         than that received in the LTM. If the LTM TTL is 0 or 1, the
+         LTM is not forwarded to the next hop, and if 0, no LTR is
+         generated."
+    REFERENCE   
+        "802.1ag clause 12.14.7.4.2:d and 21.8.4"
+    ::= { prvtCfmMepEntry 39 }
+
+prvtCfmMepTransmitLtmResult OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the result of the operation:
+         
+         - true The Linktrace Message will be (or has been) sent.
+         - false The Linktrace Message will not be sent"
+    REFERENCE   
+        "802.1ag clause 12.14.7.4.3:a"
+    ::= { prvtCfmMepEntry 40 }
+
+prvtCfmMepTransmitLtmSeqNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The LTM Transaction Identifier
+         (prvtCfmMepLtmNextSeqNumber) of the LTM sent.
+         The value returned is undefined if
+         prvtCfmMepTransmitLtmResult is false."
+    REFERENCE   
+        "802.1ag clause 12.14.7.4.3:a"
+    ::= { prvtCfmMepEntry 41 }
+
+prvtCfmMepTransmitLtmEgressIdentifier OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(8))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Identifies the MEP Linktrace Initiator that is originating,
+         or the Linktrace Responder that is forwarding, this LTM.
+         The low-order six octets contain a 48-bit IEEE MAC address
+         unique to the system in which the MEP Linktrace Initiator
+         or Linktrace Responder resides. The high-order two octets
+         contain a value sufficient to uniquely identify the MEP
+         Linktrace Initiator or Linktrace Responder within that system.
+         
+         For most Bridges, the address of any MAC attached to the
+         Bridge will suffice for the low-order six octets, and 0 for
+         the high-order octets. In some situations, e.g. if multiple
+         virtual Bridges utilizing emulated LANs are implemented in a
+         single physical system, the high-order two octets can be used
+         to differentiate among the transmitting entities.
+         
+         The value returned is undefined if
+         prvtCfmMepTransmitLtmResult is false."
+    REFERENCE   
+        "802.1ag clause 12.14.7.4.3:b and 21.8.8"
+    ::= { prvtCfmMepEntry 42 }
+
+prvtCfmMepAlarmSupressed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A boolean showing if an AIS or LCK packet
+         was received from a lower level"
+    ::= { prvtCfmMepEntry 43 }
+
+prvtCfmMepAisCondition OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "AIS condition
+         Is true by detection of signal
+         fail condition at a Server layer or reception of AIS at a
+         server (sub-) layer MEP [AIS condition/Rec. ITU-T Y.1731]
+         Respectively AIS condition Exit criteria:
+         'During an interval equal to 3.5 times the AIS transmission
+         period indicated in the AIS frames received earlier,
+         the MEP does not receive AIS frames or,
+         when ETH-CC is used, upon clearing of LOC defect at
+         MEP' /Appendix I/Rec. ITU-T Y.1731
+         
+         If prvtCfmMaAisLckLevel is configured the MEP should send AIS packets"
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 APPENDIX I Defect Conditions,
+         I.7 AIS Condition"
+    ::= { prvtCfmMepEntry 44 }
+
+prvtCfmMepLckCondition OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A boolean showing if the MEP should lock the service
+         towards the client and send LCK packets"
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 APPENDIX I Defect Conditions,
+         I.9 LCK Condition"
+    ::= { prvtCfmMepEntry 45 }
+
+prvtCfmMepAisLifetime OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), lifetime35s(1), lifetime35min(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The lifetime of the last received AIS packet"
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 APPENDIX I Defect Conditions,
+         I.7 AIS Condition"
+    ::= { prvtCfmMepEntry 46 }
+
+prvtCfmMepLckLifetime OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), lifetime35s(1), lifetime35min(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The lifetime of the last received LCK packet"
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 APPENDIX I Defect Conditions,
+         I.9 LCK Condition"
+    ::= { prvtCfmMepEntry 47 }
+
+prvtCfmMepTransmitMcastLbm OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A boolean to control sending Y.1731 multicast loopback."
+    ::= { prvtCfmMepEntry 48 }
+
+prvtCfmMepTransmitLbmInfinite OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A boolean to control sending LBMs continuously until the
+         operation is explicitly stopped by setting this back to false"
+    ::= { prvtCfmMepEntry 49 }
+
+prvtCfmMepTransmitLbmDelay OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..60)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An amount of time to wait between sent LBMs (in seconds)."
+    ::= { prvtCfmMepEntry 50 }
+
+prvtCfmMepTransmitLbmTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An amount of time to wait after the last sent LBM if no
+         LBR is received (in seconds)."
+    ::= { prvtCfmMepEntry 51 }
+
+prvtCfmMepTransmitLtmTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An amount of time to wait after the last sent LTM if no
+         LTR is received (in seconds)."
+    ::= { prvtCfmMepEntry 52 }
+
+prvtCfmMepTransmitLbmSentPkts OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of successfully sent packets in the current LBM
+         session."
+    ::= { prvtCfmMepEntry 53 }
+
+prvtCfmMepTransmitLbmSuccessRate OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Success rate of the current LBM session (in percentage*100)."
+    ::= { prvtCfmMepEntry 54 }
+
+prvtCfmMepTransmitLbmMinTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Minimum LBR response time (in msec)."
+    ::= { prvtCfmMepEntry 55 }
+
+prvtCfmMepTransmitLbmAvgTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Average LBR response time (in msec)."
+    ::= { prvtCfmMepEntry 56 }
+
+prvtCfmMepTransmitLbmMaxTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Maximum LBR response time (in msec)."
+    ::= { prvtCfmMepEntry 57 }
+
+prvtCfmMepFngAlarmTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (250..1000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The time that defects must be present before a Fault Alarm is
+         issued (fngAlarmTime. 20.33.3) (default 2.5s)."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:l and 20.33.3"
+    ::= { prvtCfmMepEntry 58 }
+
+prvtCfmMepFngResetTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (250..1000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The time that defects must be absent before re-enabling a
+         Fault Alarm (fngResetTime, 20.33.4) (default 10s)."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.1.3:m and 20.33.4"
+    ::= { prvtCfmMepEntry 59 }
+
+prvtCfmMepTransmitLbmRemainingMessages OBJECT-TYPE
+    SYNTAX      Integer32 (0..1024)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of LBMs (Loopback messages) to be transmitted"
+    ::= { prvtCfmMepEntry 60 }
+
+prvtCfmMepTransmitLbmCurrentStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A Boolean flag set to true by the bridge port to indicate
+         that another LBM may be transmitted.
+         Reset to false by the MEP Loopback Initiator State Machine."
+    ::= { prvtCfmMepEntry 61 }
+
+prvtCfmMepDbTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmMepDbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The MEP Database. A database, maintained by every MEP, that
+         maintains received information about other MEPs in the
+         Maintenance Domain.
+         
+         The SMI does not allow to state in a MIB that an object in
+         a table is an array. The solution is to take the index (or
+         indices) of the first table and add one or more indices."
+    REFERENCE   
+        "802.1ag clause 19.2.15"
+    ::= { prvtCfmMep 2 }
+
+prvtCfmMepDbEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmMepDbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The MEP Database table entry."
+    INDEX       { prvtCfmMdName, prvtCfmMaName, prvtCfmMepIdentifier, 
+                  prvtCfmMepDbRMepIdentifier }
+    ::= { prvtCfmMepDbTable 1 }
+
+PrvtCfmMepDbEntry ::= SEQUENCE {
+    prvtCfmMepDbRMepIdentifier      Unsigned32,
+    prvtCfmMepDbRMepState           PrvtCfmRemoteMepState,
+    prvtCfmMepDbRMepFailedOkTime    TimeStamp,
+    prvtCfmMepDbMacAddress          MacAddress,
+    prvtCfmMepDbRdi                 TruthValue,
+    prvtCfmMepDbPortStatusTlv       PrvtCfmPortStatus,
+    prvtCfmMepDbInterfaceStatusTlv  PrvtCfmInterfaceStatus,
+    prvtCfmMepDbChassisIdSubtype    LldpChassisIdSubtype,
+    prvtCfmMepDbChassisId           LldpChassisId,
+    prvtCfmMepDbManAddressDomain    TDomain,
+    prvtCfmMepDbManAddress          TAddress
+}
+
+prvtCfmMepDbRMepIdentifier OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Maintenance association End Point Identifier of a remote MEP
+         whose information from the MEP Database is to be returned."
+    REFERENCE   
+        "802.1ag clause 12.14.7.6.2:b"
+    ::= { prvtCfmMepDbEntry 1 }
+
+prvtCfmMepDbRMepState OBJECT-TYPE
+    SYNTAX      PrvtCfmRemoteMepState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational state of the remote MEP IFF State machines."
+    REFERENCE   
+        "802.1ag clause 12.14.7.6.3:b and 20.22"
+    ::= { prvtCfmMepDbEntry 2 }
+
+prvtCfmMepDbRMepFailedOkTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The time (SysUpTime) at which the IFF Remote MEP state machine
+         last entered either the RMEP_FAILED or RMEP_OK state."
+    REFERENCE   
+        "802.1ag clause 12.14.7.6.3:c"
+    ::= { prvtCfmMepDbEntry 3 }
+
+prvtCfmMepDbMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote MEP."
+    REFERENCE   
+        "802.1ag clause 12.14.7.6.3:d and 20.19.7"
+    ::= { prvtCfmMepDbEntry 4 }
+
+prvtCfmMepDbRdi OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "State of the RDI bit in the last received CCM (true for
+         RDI=1), or false if none has been received."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.6.3:e and 20.19.2"
+    ::= { prvtCfmMepDbEntry 5 }
+
+prvtCfmMepDbPortStatusTlv OBJECT-TYPE
+    SYNTAX      PrvtCfmPortStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "An enumerated value of the Port status TLV received in the
+         last CCM from the remote MEP or the default value
+         psNoPortStateTLV indicating either no CCM has been received,
+         or that nor port status TLV was received in the last CCM."
+    REFERENCE   
+        "802.1ag clause 12.14.7.6.3:f and 20.19.3"
+    ::= { prvtCfmMepDbEntry 6 }
+
+prvtCfmMepDbInterfaceStatusTlv OBJECT-TYPE
+    SYNTAX      PrvtCfmInterfaceStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "An enumerated value of the Interface status TLV received
+         in the last CCM from the remote MEP or the default value
+         isNoInterfaceStatus TLV indicating either no CCM has been
+         received, or that no interface status TLV was received in
+         the last CCM."
+    REFERENCE   
+        "802.1ag clause 12.14.7.6.3:g and 20.19.4"
+    ::= { prvtCfmMepDbEntry 7 }
+
+prvtCfmMepDbChassisIdSubtype OBJECT-TYPE
+    SYNTAX      LldpChassisIdSubtype
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object specifies the format of the Chassis ID received
+         in the last CCM."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.6.3:h and 21.5.3.2"
+    ::= { prvtCfmMepDbEntry 8 }
+
+prvtCfmMepDbChassisId OBJECT-TYPE
+    SYNTAX      LldpChassisId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Chassis ID. The format of this object is determined by the
+         value of the prvtCfmLtrChassisIdSubtype object."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.6.3:h and 21.5.3.3"
+    ::= { prvtCfmMepDbEntry 9 }
+
+prvtCfmMepDbManAddressDomain OBJECT-TYPE
+    SYNTAX      TDomain
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The TDomain that identifies the type and format of
+         the related prvtCfmMepDbManAddress object, used to access
+         the SNMP agent of the system transmitting the CCM. Received
+         in the CCM Sender ID TLV from that system.
+         
+         Typical values will be one of (not all inclusive) list:
+         
+         snmpUDPDomain (from SNMPv2-TM, RFC3417)
+         snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789)
+         
+         The value 'zeroDotZero' (from RFC2578) indicates 'no LTR
+         Sender ID TLV received', in which case the related object
+         prvtCfmMepDbManAddress must have a zero-length OCTET STRING
+         as a value."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.6.3:h, 21.5.3.5, 21.6.7"
+    ::= { prvtCfmMepDbEntry 10 }
+
+prvtCfmMepDbManAddress OBJECT-TYPE
+    SYNTAX      TAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The TAddress that can be used to access the SNMP
+         agent of the system transmitting the CCM, received in the CCM
+         Sender ID TLV from that system.
+         
+         If the related object prvtCfmMepDbManAddressDomain contains
+         the value 'zeroDotZero', this object prvtCfmMepDbManAddress
+         must have a zero-length OCTET STRING as a value."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.6.3:h, 21.5.3.7, 21.6.7"
+    ::= { prvtCfmMepDbEntry 11 }
+
+prvtCfmLtrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmLtrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table extends the MEP table and contains a list of
+         Linktrace replies received by a specific MEP in response to
+         a linktrace message.
+         
+         SNMP SMI does not allow to state in a MIB that an object in
+         a table is an array. The solution is to take the index (or
+         indices) of the first table and add one or more indices."
+    REFERENCE   
+        "802.1ag clause 12.14.7.5"
+    ::= { prvtCfmMep 3 }
+
+prvtCfmLtrEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmLtrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Linktrace Reply table entry."
+    INDEX       { prvtCfmMdName, prvtCfmMaName, prvtCfmMepIdentifier, 
+                  prvtCfmLtrSeqNumber, prvtCfmLtrReceiveOrder }
+    ::= { prvtCfmLtrTable 1 }
+
+PrvtCfmLtrEntry ::= SEQUENCE {
+    prvtCfmLtrSeqNumber                 Unsigned32,
+    prvtCfmLtrReceiveOrder              Unsigned32,
+    prvtCfmLtrTtl                       Unsigned32,
+    prvtCfmLtrForwarded                 TruthValue,
+    prvtCfmLtrTerminalMep               TruthValue,
+    prvtCfmLtrLastEgressIdentifier      OCTET STRING,
+    prvtCfmLtrNextEgressIdentifier      OCTET STRING,
+    prvtCfmLtrRelay                     PrvtCfmRelayActionFieldValue,
+    prvtCfmLtrChassisIdSubtype          LldpChassisIdSubtype,
+    prvtCfmLtrChassisId                 LldpChassisId,
+    prvtCfmLtrManAddressDomain          TDomain,
+    prvtCfmLtrManAddress                TAddress,
+    prvtCfmLtrIngress                   PrvtCfmIngressActionFieldValue,
+    prvtCfmLtrIngressMac                MacAddress,
+    prvtCfmLtrIngressPortIdSubtype      LldpPortIdSubtype,
+    prvtCfmLtrIngressPortId             LldpPortId,
+    prvtCfmLtrEgress                    PrvtCfmEgressActionFieldValue,
+    prvtCfmLtrEgressMac                 MacAddress,
+    prvtCfmLtrEgressPortIdSubtype       LldpPortIdSubtype,
+    prvtCfmLtrEgressPortId              LldpPortId,
+    prvtCfmLtrOrganizationSpecificTlv   OCTET STRING,
+    prvtCfmLtrTime                      Unsigned32,
+    prvtCfmLtrSourceMac                 MacAddress
+}
+
+prvtCfmLtrSeqNumber OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Transaction identifier/Sequence number returned by a previous
+         transmit linktrace message command, indicating which LTM's
+         response is going to be returned."
+    REFERENCE   
+        "802.1ag clause 12.14.7.5.2:b"
+    ::= { prvtCfmLtrEntry 1 }
+
+prvtCfmLtrReceiveOrder OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index to distinguish among multiple LTRs with the same LTR
+         Transaction Identifier field value. prvtCfmLtrReceiveOrder
+         are assigned sequentially from 1, in the order that the
+         Linktrace Initiator received the LTRs."
+    REFERENCE   
+        "802.1ag clause 12.14.7.5.2:c"
+    ::= { prvtCfmLtrEntry 2 }
+
+prvtCfmLtrTtl OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "TTL field value for a returned LTR."
+    REFERENCE   
+        "802.1ag clause 12.14.7.5 and 20.36.2.2"
+    ::= { prvtCfmLtrEntry 3 }
+
+prvtCfmLtrForwarded OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates if a LTM was forwarded by the responding MP, as
+         returned in the 'FwdYes' flag of the flags field."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:c and 20.36.2.1"
+    ::= { prvtCfmLtrEntry 4 }
+
+prvtCfmLtrTerminalMep OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A boolean value stating whether the forwarded LTM reached a
+         MEP enclosing its MA, as returned in the Terminal MEP flag of
+         the Flags field."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:d and 20.36.2.1"
+    ::= { prvtCfmLtrEntry 5 }
+
+prvtCfmLtrLastEgressIdentifier OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(8))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "An octet field holding the Last Egress Identifier returned
+         in the LTR Egress Identifier TLV of the LTR.
+         The Last Egress Identifier identifies the MEP Linktrace
+         Initiator that originated, or the Linktrace Responder that
+         forwarded, the LTM to which this LTR is the response. This
+         is the same value as the Egress Identifier TLV of that LTM."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:e and 20.36.2.3"
+    ::= { prvtCfmLtrEntry 6 }
+
+prvtCfmLtrNextEgressIdentifier OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(8))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "An octet field holding the Next Egress Identifier returned
+         in the LTR Egress Identifier TLV of the LTR. The Next Egress
+         Identifier Identifies the Linktrace Responder that
+         transmitted this LTR, and can forward the LTM to the next
+         hop. This is the same value as the Egress Identifier TLV of
+         the forwarded LTM, if any. If the FwdYes bit of the Flags
+         field is false, the contents of this field are undefined,
+         i.e. any value can be transmitted, and the field is ignored
+         by the receiver."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:f and 20.36.2.4"
+    ::= { prvtCfmLtrEntry 7 }
+
+prvtCfmLtrRelay OBJECT-TYPE
+    SYNTAX      PrvtCfmRelayActionFieldValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Value returned in the Relay Action field."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:g and 20.36.2.5"
+    ::= { prvtCfmLtrEntry 8 }
+
+prvtCfmLtrChassisIdSubtype OBJECT-TYPE
+    SYNTAX      LldpChassisIdSubtype
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object specifies the format of the Chassis ID returned
+         in the Sender ID TLV of the LTR, if any. This value is
+         meaningless if the prvtCfmLtrChassisId has a length of 0."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:h and 21.5.3.2"
+    ::= { prvtCfmLtrEntry 9 }
+
+prvtCfmLtrChassisId OBJECT-TYPE
+    SYNTAX      LldpChassisId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Chassis ID returned in the Sender ID TLV of the LTR, if
+         any. The format of this object is determined by the
+         value of the prvtCfmLtrChassisIdSubtype object."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:i and 21.5.3.3"
+    ::= { prvtCfmLtrEntry 10 }
+
+prvtCfmLtrManAddressDomain OBJECT-TYPE
+    SYNTAX      TDomain
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The TDomain that identifies the type and format of
+         the related prvtCfmLtrManAddress object, used to access
+         the SNMP agent of the system transmitting the LTR. Received
+         in the LTR Sender ID TLV from that system.
+         
+         Typical values will be one of (not all inclusive) list:
+         
+         
+         snmpUDPDomain (from SNMPv2-TM, RFC3417)
+         snmpIeee802Domain (from SNMP-IEEE802-TM-MIB, RFC4789)
+         
+         The value 'zeroDotZero' (from RFC2578) indicates 'no LTR
+         Sender ID TLV received', in which case the related object
+         prvtCfmLtrManAddress must have a zero-length OCTET STRING
+         as a value."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:j, 21.5.3.5, 21.9.6"
+    ::= { prvtCfmLtrEntry 11 }
+
+prvtCfmLtrManAddress OBJECT-TYPE
+    SYNTAX      TAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The TAddress that can be used to access the SNMP
+         agent of the system transmitting the CCM, received in the CCM
+         Sender ID TLV from that system.
+         
+         If the related object prvtCfmLtrManAddressDomain contains
+         the value 'zeroDotZero', this object prvtCfmLtrManAddress
+         must have a zero-length OCTET STRING as a value."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:j, 21.5.3.7, 21.9.6"
+    ::= { prvtCfmLtrEntry 12 }
+
+prvtCfmLtrIngress OBJECT-TYPE
+    SYNTAX      PrvtCfmIngressActionFieldValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value returned in the Ingress Action Field of the LTM."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:k and 20.36.2.6"
+    ::= { prvtCfmLtrEntry 13 }
+
+prvtCfmLtrIngressMac OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "MAC address returned in the ingress MAC address field."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:l and 20.36.2.7"
+    ::= { prvtCfmLtrEntry 14 }
+
+prvtCfmLtrIngressPortIdSubtype OBJECT-TYPE
+    SYNTAX      LldpPortIdSubtype
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Format of the Ingress Port ID."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:m and 20.36.2.8"
+    ::= { prvtCfmLtrEntry 15 }
+
+prvtCfmLtrIngressPortId OBJECT-TYPE
+    SYNTAX      LldpPortId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Ingress Port ID. The format of this object is determined by
+         the value of the prvtCfmLtrIngressPortIdSubtype object."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:n and 20.36.2.9"
+    ::= { prvtCfmLtrEntry 16 }
+
+prvtCfmLtrEgress OBJECT-TYPE
+    SYNTAX      PrvtCfmEgressActionFieldValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value returned in the Egress Action Field of the LTM."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:o and 20.36.2.10"
+    ::= { prvtCfmLtrEntry 17 }
+
+prvtCfmLtrEgressMac OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "MAC address returned in the egress MAC address field."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:p and 20.36.2.11"
+    ::= { prvtCfmLtrEntry 18 }
+
+prvtCfmLtrEgressPortIdSubtype OBJECT-TYPE
+    SYNTAX      LldpPortIdSubtype
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Format of the egress Port ID."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:q and 20.36.2.12"
+    ::= { prvtCfmLtrEntry 19 }
+
+prvtCfmLtrEgressPortId OBJECT-TYPE
+    SYNTAX      LldpPortId
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Egress Port ID. The format of this object is determined by
+         the value of the prvtCfmLtrEgressPortIdSubtype object."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:r and 20.36.2.13"
+    ::= { prvtCfmLtrEntry 20 }
+
+prvtCfmLtrOrganizationSpecificTlv OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "All Organization specific TLVs returned in the LTR, if
+         any. Includes all octets including and following the TLV
+         Length field of each TLV, concatenated together."
+    REFERENCE   
+        "802.1ag clauses 12.14.7.5.3:s, 21.5.2"
+    ::= { prvtCfmLtrEntry 21 }
+
+prvtCfmLtrTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote MPs response time in milliseconds."
+    ::= { prvtCfmLtrEntry 22 }
+
+prvtCfmLtrSourceMac OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "MAC address that originated the LTR."
+    ::= { prvtCfmLtrEntry 23 }
+
+prvtCfmLbrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmLbrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table contains loopback results following the last loopback operation."
+    ::= { prvtCfmMep 4 }
+
+prvtCfmLbrEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmLbrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtCfmLbrEntry"
+    INDEX       { prvtCfmMdName, prvtCfmMaName, prvtCfmMepIdentifier, 
+                  prvtCfmLbrSeqNumber, prvtCfmLbrReceiveOrder }
+    ::= { prvtCfmLbrTable 1 }
+
+PrvtCfmLbrEntry ::= SEQUENCE {
+    prvtCfmLbrSeqNumber     Unsigned32,
+    prvtCfmLbrReceiveOrder  Unsigned32,
+    prvtCfmLbrTime          Unsigned32,
+    prvtCfmLbrMacAddress    MacAddress,
+    prvtCfmLbrBadMsdu       TruthValue
+}
+
+prvtCfmLbrSeqNumber OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Transaction identifier/Sequence number of the received LBR."
+    ::= { prvtCfmLbrEntry 1 }
+
+prvtCfmLbrReceiveOrder OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index to distinguish among multiple LBRs with the same LBR
+         Transaction Identifier field value. This situation can appear
+         in the case of multicast loopback."
+    ::= { prvtCfmLbrEntry 2 }
+
+prvtCfmLbrTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote MEPs response time in milliseconds."
+    ::= { prvtCfmLbrEntry 3 }
+
+prvtCfmLbrMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote MEPs mac address. For unicast loopback
+         this is the same as prvtCfmMepTransmitLbmDestMacAddress,
+         but for multicast loopback there will be different entries."
+    ::= { prvtCfmLbrEntry 4 }
+
+prvtCfmLbrBadMsdu OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Result of the Data TLV verification."
+    ::= { prvtCfmLbrEntry 5 }
+
+prvtCfmProfile OBJECT IDENTIFIER
+    ::= { prvtCfmMIBObjects 7 }
+
+prvtCfmProfileTableNextIndex OBJECT-TYPE
+    SYNTAX      PrvtCfmIndexIntegerNextFree
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object contains an unused value
+         for prvtCfmProfileIndex in the prvtCfmProfileTable
+         or a zero to indicate that none exist."
+    ::= { prvtCfmProfile 1 }
+
+prvtCfmProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table contains loopback results from all remote MEPs in the MA."
+    ::= { prvtCfmProfile 2 }
+
+prvtCfmProfileEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in profile table"
+    INDEX       { prvtCfmProfileIndex }
+    ::= { prvtCfmProfileTable 1 }
+
+PrvtCfmProfileEntry ::= SEQUENCE {
+    prvtCfmProfileIndex                 Unsigned32,
+    prvtCfmProfileRowStatus             RowStatus,
+    prvtCfmProfileDescr                 OCTET STRING,
+    prvtCfmProfilePriority              Unsigned32,
+    prvtCfmProfileRate                  Unsigned32,
+    prvtCfmProfileSize                  Unsigned32,
+    prvtCfmProfileBucketSize            Unsigned32,
+    prvtCfmProfile1wJitterError         Unsigned32,
+    prvtCfmProfile1wJitterWarning       Unsigned32,
+    prvtCfmProfileJitterError           Unsigned32,
+    prvtCfmProfileJitterErrorPeriod     Unsigned32,
+    prvtCfmProfileJitterWarning         Unsigned32,
+    prvtCfmProfileJitterWarningPeriod   Unsigned32,
+    prvtCfmProfileFrameLossError        Unsigned32,
+    prvtCfmProfileFrameLossWarning      Unsigned32,
+    prvtCfmProfileLatencyError          Unsigned32,
+    prvtCfmProfileLatencyErrorPeriod    Unsigned32,
+    prvtCfmProfileLatencyWarning        Unsigned32,
+    prvtCfmProfileLatencyWarningPeriod  Unsigned32,
+    prvtCfmProfileOneWayJitterEnabled   TruthValue,
+    prvtCfmProfileTwoWayJitterEnabled   TruthValue,
+    prvtCfmProfileFramelossEnabled      TruthValue,
+    prvtCfmProfileLatencyEnabled        TruthValue
+}
+
+prvtCfmProfileIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..96)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table index."
+    ::= { prvtCfmProfileEntry 1 }
+
+prvtCfmProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The status of the row.
+         The writable columns in a row can not be changed if the row
+         is active. All columns must have a valid value before a row
+         can be activated."
+    ::= { prvtCfmProfileEntry 2 }
+
+prvtCfmProfileDescr OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A description for this profile.
+         This field must be unique among all profiles."
+    ::= { prvtCfmProfileEntry 3 }
+
+prvtCfmProfilePriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "802.1p class-of-service setting."
+    ::= { prvtCfmProfileEntry 4 }
+
+prvtCfmProfileRate OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..3)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Number of Request packets to send each time."
+    ::= { prvtCfmProfileEntry 5 }
+
+prvtCfmProfileSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..1462)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Size of data TLV included in probe packets (in octets)."
+    ::= { prvtCfmProfileEntry 6 }
+
+prvtCfmProfileBucketSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (2..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Number of the results to save for results calculation."
+    ::= { prvtCfmProfileEntry 7 }
+
+prvtCfmProfile1wJitterError OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies one-way jitter error values
+         to monitor in milliseconds."
+    ::= { prvtCfmProfileEntry 8 }
+
+prvtCfmProfile1wJitterWarning OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies one-way jitter warning values
+         to monitor in milliseconds."
+    ::= { prvtCfmProfileEntry 9 }
+
+prvtCfmProfileJitterError OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies round-trip jitter error values
+         to monitor in milliseconds."
+    ::= { prvtCfmProfileEntry 10 }
+
+prvtCfmProfileJitterErrorPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..3600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the duration jitter occurs in seconds."
+    ::= { prvtCfmProfileEntry 11 }
+
+prvtCfmProfileJitterWarning OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies round-trip jitter warning values
+         to monitor in milliseconds. If set value is greater than the
+         jitter-error it means that the warning is disabled."
+    ::= { prvtCfmProfileEntry 12 }
+
+prvtCfmProfileJitterWarningPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..3600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the duration jitter occurs in seconds."
+    ::= { prvtCfmProfileEntry 13 }
+
+prvtCfmProfileFrameLossError OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..99)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies round-trip frame-loss error
+         values to monitor. The default is
+         frame-loss of 10% is reported."
+    ::= { prvtCfmProfileEntry 14 }
+
+prvtCfmProfileFrameLossWarning OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..99)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies round-trip frame-loss warning
+         values to monitor. The default is frame-loss
+         of 8% is reported. If set value is greater
+         than the frame-loss-error it means
+         that the warning is disable."
+    ::= { prvtCfmProfileEntry 15 }
+
+prvtCfmProfileLatencyError OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies round-trip latency error values
+         to monitor in milliseconds."
+    ::= { prvtCfmProfileEntry 16 }
+
+prvtCfmProfileLatencyErrorPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..3600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the duration latency increase
+         occurs in seconds."
+    ::= { prvtCfmProfileEntry 17 }
+
+prvtCfmProfileLatencyWarning OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies round-trip latency error
+         values to monitor in milliseconds.
+         If set value is greater than the
+         latency-error it means that the
+         warning is disabled."
+    ::= { prvtCfmProfileEntry 18 }
+
+prvtCfmProfileLatencyWarningPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..3600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the duration latency increase occurs."
+    ::= { prvtCfmProfileEntry 19 }
+
+prvtCfmProfileOneWayJitterEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if one-way jitter is monitored."
+    ::= { prvtCfmProfileEntry 20 }
+
+prvtCfmProfileTwoWayJitterEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if two-way jitter is monitored."
+    ::= { prvtCfmProfileEntry 21 }
+
+prvtCfmProfileFramelossEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if frame-loss is monitored."
+    ::= { prvtCfmProfileEntry 22 }
+
+prvtCfmProfileLatencyEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if two-way latency is monitored."
+    ::= { prvtCfmProfileEntry 23 }
+
+prvtCfmProcess OBJECT IDENTIFIER
+    ::= { prvtCfmMIBObjects 8 }
+
+prvtCfmProcessTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmProcessEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Private extension of prvtCfmMaTable.
+         Controls the two-way monitoring process
+         for MEP's in the MA."
+    ::= { prvtCfmProcess 1 }
+
+prvtCfmProcessEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmProcessEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtCfmProcessEntry"
+    INDEX       { prvtCfmProcessIndex, prvtCfmMdName, prvtCfmMaName }
+    ::= { prvtCfmProcessTable 1 }
+
+PrvtCfmProcessEntry ::= SEQUENCE {
+    prvtCfmProcessIndex             Unsigned32,
+    prvtCfmProcessRowStatus         RowStatus,
+    prvtCfmProcessProfileIndex      Unsigned32,
+    prvtCfmProcessName              OCTET STRING,
+    prvtCfmProcessShutdown          TruthValue,
+    prvtCfmProcessRepeatInterval    Unsigned32,
+    prvtCfmProcessPacketType        INTEGER,
+    prvtCfmProcessUnreturnedPkts    Unsigned32
+}
+
+prvtCfmProcessIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..256)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table index."
+    ::= { prvtCfmProcessEntry 1 }
+
+prvtCfmProcessRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The status of the row.
+         The writable columns in a row can not be
+         changed if the row is active. All columns
+         must have a valid value before a row can
+         be activated."
+    ::= { prvtCfmProcessEntry 2 }
+
+prvtCfmProcessProfileIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..64)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Index of the monitoring profile to be used."
+    ::= { prvtCfmProcessEntry 3 }
+
+prvtCfmProcessName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..20))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The name of the process. Should be unique per domain/MA"
+    ::= { prvtCfmProcessEntry 4 }
+
+prvtCfmProcessShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The value 'true' will disable two-way monitoring process
+         for MEP's in the MA."
+    ::= { prvtCfmProcessEntry 5 }
+
+prvtCfmProcessRepeatInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..420)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Repeating frequency of the monitoring process."
+    ::= { prvtCfmProcessEntry 6 }
+
+prvtCfmProcessPacketType OBJECT-TYPE
+    SYNTAX      INTEGER { cfm(1), y1731(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Use CFM Loopback or Y.1731 LMMs and DMMs packets."
+    ::= { prvtCfmProcessEntry 7 }
+
+prvtCfmProcessUnreturnedPkts OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of requests for which a reply
+         hasn't been received. These packets
+         will be counted as lost when they
+         enter timeout."
+    ::= { prvtCfmProcessEntry 8 }
+
+prvtCfmProcessResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmProcessResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table contains process results."
+    ::= { prvtCfmProcess 2 }
+
+prvtCfmProcessResultEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmProcessResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtCfmProcessResultEntry"
+    INDEX       { prvtCfmMdName, prvtCfmMaName, prvtCfmProcessIndex, 
+                  prvtCfmMepDbRMepIdentifier }
+    ::= { prvtCfmProcessResultTable 1 }
+
+PrvtCfmProcessResultEntry ::= SEQUENCE {
+    prvtCfmProcessResultOneWayJitter    Unsigned32,
+    prvtCfmProcessResultTwoWayJitter    Unsigned32,
+    prvtCfmProcessResultLatency         Unsigned32,
+    prvtCfmProcessResultFrameloss       Unsigned32
+}
+
+prvtCfmProcessResultOneWayJitter OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "One way jitter calculated for
+         a specific remote MEP in milliseconds"
+    ::= { prvtCfmProcessResultEntry 1 }
+
+prvtCfmProcessResultTwoWayJitter OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Two way jitter calculated for a specific
+         remote MEP in milliseconds"
+    ::= { prvtCfmProcessResultEntry 2 }
+
+prvtCfmProcessResultLatency OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Two way latency calculated for a specific
+         remote MEP in milliseconds"
+    ::= { prvtCfmProcessResultEntry 3 }
+
+prvtCfmProcessResultFrameloss OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Two way frameloss calculated for a specific
+         remote MEP in units of hundredths of percent.
+         Note: When prvtCfmProcessResultFrameloss has
+         value of 10000, all the values of
+         prvtCfmProcessResultOneWayJitter,
+         prvtCfmProcessResultTwoWayJitter and
+         prvtCfmProcessResultLatency are irrelevant."
+    ::= { prvtCfmProcessResultEntry 4 }
+
+prvtCfmMaAisLckVlan OBJECT IDENTIFIER
+    ::= { prvtCfmMIBObjects 9 }
+
+prvtCfmMaAisLckVlanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfmMaAisLckVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table includes extra variables needed for AIS/LCK configurable vlans"
+    ::= { prvtCfmMaAisLckVlan 1 }
+
+prvtCfmMaAisLckVlanEntry OBJECT-TYPE
+    SYNTAX      PrvtCfmMaAisLckVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table includes extra variables needed for AIS/LCK configurable vlans"
+    INDEX       { prvtCfmMdName, prvtCfmMaName, prvtCfmMaAisLckVlanId }
+    ::= { prvtCfmMaAisLckVlanTable 1 }
+
+PrvtCfmMaAisLckVlanEntry ::= SEQUENCE {
+    prvtCfmMaAisLckVlanId           Integer32,
+    prvtCfmMaAisLckVlanRowStatus    RowStatus
+}
+
+prvtCfmMaAisLckVlanId OBJECT-TYPE
+    SYNTAX      Integer32 (1..4094)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Vlan ID (towards customer level) that the generated AIS/LCK packets should use."
+    ::= { prvtCfmMaAisLckVlanEntry 1 }
+
+prvtCfmMaAisLckVlanRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The status of the row."
+    ::= { prvtCfmMaAisLckVlanEntry 2 }
+
+prvtCfm1wJitterThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmProcessResultOneWayJitter, 
+                  prvtCfmProfile1wJitterWarning, 
+                  prvtCfmProfile1wJitterError }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the one way jitter
+         on a CFM test will surpass one of the 2 defined thresholds."
+    ::= { prvtCfmMIBNotifications 1 }
+
+prvtCfmJitterThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmProcessResultTwoWayJitter, 
+                  prvtCfmProfileJitterWarning, 
+                  prvtCfmProfileJitterWarningPeriod, 
+                  prvtCfmProfileJitterError, 
+                  prvtCfmProfileJitterErrorPeriod }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the two way jitter
+         on a CFM test will surpass one of the 2 defined thresholds."
+    ::= { prvtCfmMIBNotifications 2 }
+
+prvtCfmFrameLossThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmProcessResultFrameloss, 
+                  prvtCfmProfileFrameLossWarning, 
+                  prvtCfmProfileFrameLossError }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the frame loss
+         on a CFM test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtCfmMIBNotifications 3 }
+
+prvtCfmLatencyThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmProcessResultLatency, 
+                  prvtCfmProfileLatencyWarning, 
+                  prvtCfmProfileLatencyWarningPeriod, 
+                  prvtCfmProfileLatencyError, 
+                  prvtCfmProfileLatencyErrorPeriod }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the latency
+         on a CFM test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtCfmMIBNotifications 4 }
+
+prvtCfmUnexpectedPriority NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmMepDirection, prvtCfmMepDbMacAddress, 
+                  prvtCfmMepInterfaceIndex }
+    STATUS      current
+    DESCRIPTION 
+        "References to in the [G.8021/Y.1341] :
+         Unexpected Priority defect (dUNPr)
+         The Unexpected Priority defect is calculated at the ETH layer.
+         It detects the configuration of different Priorities
+         for CCM at different MEPs belonging to the same MEG."
+    ::= { prvtCfmMIBNotifications 5 }
+
+prvtCfmFaultAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmMepDirection, prvtCfmMepHighestPrDefect, 
+                  prvtCfmMepInterfaceIndex }
+    STATUS      current
+    DESCRIPTION 
+        "A MEP has a persistent defect condition. A notification
+         (fault alarm) is sent to the management entity with the OID
+         of the MEP that has detected the fault.
+         
+         Whenever a MEP has a persistent defect,
+         it may or may not generate a Fault Alarm to warn the system
+         administrator of the problem, as controlled by the MEP
+         Fault Notification Generator State Machine and associated
+         Managed Objects. Only the highest-priority defect, as shown
+         in Table 20-1, is reported in the Fault Alarm.
+         
+         If a defect with a higher priority is raised after a Fault
+         Alarm has been issued, another Fault Alarm is issued.
+         
+         The management entity receiving the notification can identify
+         the system from the network source address of the
+         notification, and can identify the MEP reporting the defect
+         by the indices in the OID of the prvtCfmMepHighestPrDefect
+         variable in the notification:
+         
+         prvtCfmMdName  - Also the index of the MEP's
+                            Maintenance Domain table entry
+                            (prvtCfmMdTable).
+         prvtCfmMaName  - Also an index (with the MD table index)
+                            of the MEP's Maintenance Association
+                            table entry
+                            (prvtCfmMaTable),
+         prvtCfmMepIdentifier - MEP Identifier and final index
+                            into the MEP table (prvtCfmMepTable)."
+    REFERENCE   
+        "802.1ag clause 12.14.7.7"
+    ::= { prvtCfmMIBNotifications 6 }
+
+prvtCfmAisLckRecieved NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmMepAisCondition }
+    STATUS      current
+    DESCRIPTION 
+        "A MEP may generate a AIS/LCK notification each time its
+         AIS/LCK condition is activated."
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 APPENDIX I Defect Conditions
+         I.7 AIS Condition, I.9 LCK Condition"
+    ::= { prvtCfmMIBNotifications 7 }
+
+prvtCfmAisLckCleared NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmMepAisCondition }
+    STATUS      current
+    DESCRIPTION 
+        "The notification is sent each time
+         AIS/LCK condition is cleared."
+    REFERENCE   
+        "ITU-T Recommendation Y.1731 APPENDIX I Defect Conditions
+         I.7 AIS Condition, I.9 LCK Condition"
+    ::= { prvtCfmMIBNotifications 8 }
+
+prvtCfmFaultAlarmCleared NOTIFICATION-TYPE
+    OBJECTS     { prvtCfmMepDirection, prvtCfmMepFngState }
+    STATUS      current
+    DESCRIPTION 
+        "A MEP's persistent defect condition has cleared. A notification
+         is sent to the management entity with the OID
+         of the MEP that has cleared the fault.
+         
+         The management entity receiving the notification can identify
+         the system from the network source address of the
+         notification, and can identify the MEP by the indices in the
+         OID of the prvtCfmMepIdentifier variable in the notification:
+         
+           prvtCfmMdName  - Also the index of the MEP's
+                              Maintenance Domain table entry
+                              (prvtCfmMdTable).
+           prvtCfmMaName  - Also an index (with the MD table index)
+                              of the MEP's Maintenance Association
+                              table entry
+                              (prvtCfmMaTable),
+           prvtCfmMepIdentifier - MEP Identifier and final index
+                              into the MEP table (prvtCfmMepTable)."
+    ::= { prvtCfmMIBNotifications 9 }
+
+END -- end of module PRVT-CFM-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-CONFIGCHANGE-MIB b/MIBS/telco-systems/binox/PRVT-CONFIGCHANGE-MIB
new file mode 100644
index 0000000..7b987d5
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-CONFIGCHANGE-MIB
@@ -0,0 +1,102 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-CONFIGCHANGE-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-CONFIGCHANGE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE
+        FROM SNMPv2-SMI;
+
+prvtConfigChangeMIB MODULE-IDENTITY
+    LAST-UPDATED "201009010000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Initial version. This MIB will provied traps for change"
+    REVISION    "201009010000Z"
+    DESCRIPTION 
+        "Initial release"
+    ::= { switch 150 }
+
+
+prvtConfigChangeNotifications OBJECT IDENTIFIER
+    ::= { prvtConfigChangeMIB 0 }
+
+prvtConfigChangeObjects OBJECT IDENTIFIER
+    ::= { prvtConfigChangeMIB 1 }
+
+prvtConfigChangeAlarmNamespace OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        "The configChangeAlarmNamespace specifies the Namespace
+         of an object whose value has been changed."
+    ::= { prvtConfigChangeObjects 1 }
+
+prvtConfigChangeAlarmKeypath OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        "The configChangeAlarmKeypath specifies the Keypath
+         of an object whose entry has been changed."
+    ::= { prvtConfigChangeObjects 2 }
+
+prvtConfigChangeAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtConfigChangeAlarmNamespace, 
+                  prvtConfigChangeAlarmKeypath }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when the value of configurable
+         attribute has been changed. The notification can be used
+         to trigger maintenance polling of the running configuration
+         on the device. There is flood prevention that notification
+         with same varbinds will not be sent for certain time - i.e. 1 min"
+    ::= { prvtConfigChangeNotifications 1 }
+
+END -- end of module PRVT-CONFIGCHANGE-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-CR-LDP-MIB b/MIBS/telco-systems/binox/PRVT-CR-LDP-MIB
new file mode 100644
index 0000000..1936feb
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-CR-LDP-MIB
@@ -0,0 +1,166 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-CR-LDP-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-CR-LDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    mpls
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+prvtCrLdpMIB MODULE-IDENTITY
+    LAST-UPDATED "200801010000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB module for management of the PRVT-CR-LDP"
+    REVISION    "200801010000Z"
+    DESCRIPTION 
+        "Initial"
+    ::= { mpls 3 }
+
+
+PrvtCrldpIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A general purpose SNMP index into the prvtHafEntity table."
+    SYNTAX      Unsigned32
+
+prvtCrLdpObjects OBJECT IDENTIFIER
+    ::= { prvtCrLdpMIB 1 }
+
+prvtcrldpSigTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtcrldpSigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of active instances of PRVT-CR-LDP Signaling."
+    ::= { prvtCrLdpObjects 1 }
+
+prvtcrldpSigEntry OBJECT-TYPE
+    SYNTAX      PrvtcrldpSigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each of these entries represents an instance of
+         PRVT-CR-LDP Signaling running in the HAF. Some of these instances
+         will be the primary, and others may be backups."
+    INDEX       { prvtcrldpSigIndex }
+    ::= { prvtcrldpSigTable 1 }
+
+PrvtcrldpSigEntry ::= SEQUENCE {
+    prvtcrldpSigIndex       PrvtCrldpIndex,
+    prvtcrldpSigRowStatus   RowStatus
+}
+
+prvtcrldpSigIndex OBJECT-TYPE
+    SYNTAX      PrvtCrldpIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The index of this prvtcrldpSigEntry. This is the
+         HAF entity index passed on the product create
+         parameters."
+    ::= { prvtcrldpSigEntry 1 }
+
+prvtcrldpSigRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used to create and delete a PRVT-CR-LDP Signaling Table entry.
+         When this object is set to 'active', only the
+         prvtcrldpSigAdminStatus object in the row may be modified."
+    ::= { prvtcrldpSigEntry 2 }
+
+prvtcrldpPmTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtcrldpPmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of active instances of PRVT-CR-LDP Path Manager."
+    ::= { prvtCrLdpObjects 2 }
+
+prvtcrldpPmEntry OBJECT-TYPE
+    SYNTAX      PrvtcrldpPmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each of these entries represents an instance of
+         PRVT-CR-LDP Path Manager running in the HAF. Some of these instances
+         will be the primary, and others may be backups."
+    INDEX       { prvtcrldpPmIndex }
+    ::= { prvtcrldpPmTable 1 }
+
+PrvtcrldpPmEntry ::= SEQUENCE {
+    prvtcrldpPmIndex        PrvtCrldpIndex,
+    prvtcrldpPmRowStatus    RowStatus
+}
+
+prvtcrldpPmIndex OBJECT-TYPE
+    SYNTAX      PrvtCrldpIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The index of this prvtcrldpPmEntry. This is the
+         HAF entity index passed on the product create
+         parameters."
+    ::= { prvtcrldpPmEntry 1 }
+
+prvtcrldpPmRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used to create and delete a PRVT-CR-LDP Path Manager Table entry.
+         When this object is set to 'active', only the
+         prvtcrldpPmAdminStatus object in the row may be modified."
+    ::= { prvtcrldpPmEntry 2 }
+
+END -- end of module PRVT-CR-LDP-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-EFM-OAM-MIB b/MIBS/telco-systems/binox/PRVT-EFM-OAM-MIB
new file mode 100644
index 0000000..3636d27
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-EFM-OAM-MIB
@@ -0,0 +1,1413 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-EFM-OAM-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-EFM-OAM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex, ifIndex
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    Counter32, Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, 
+    OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    MacAddress, RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtEfmOamMIB MODULE-IDENTITY
+    LAST-UPDATED "201001100000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This MIB should provide general configuration and
+         reports of this protocol that are not available in
+         the standard DOT3-OAM-MIB, such as Enabling and Timers,
+         as well as the ability to control private
+         extensions added to the EFM OAM."
+    REVISION    "201001100000Z"
+    DESCRIPTION 
+        "Initial version"
+    ::= { switch 133 }
+
+
+prvtEfmOamNotifications OBJECT IDENTIFIER
+    ::= { prvtEfmOamMIB 0 }
+
+prvtEfmOamObjects OBJECT IDENTIFIER
+    ::= { prvtEfmOamMIB 1 }
+
+prvtEfmOamEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/disable the EFM OAM on the device"
+    ::= { prvtEfmOamObjects 1 }
+
+prvtEfmOamMultiPduCount OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Number of OAM PDUs that will be sent when
+         protocol ask to send multiple subsequent
+         messages."
+    ::= { prvtEfmOamObjects 2 }
+
+prvtEfmOamRemoteEvent OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable or disable sending the local
+         event notifications to the remote device."
+    ::= { prvtEfmOamObjects 3 }
+
+prvtEfmOamLogEvents OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Disable/enable sending of Event Notification
+         OAM PDU to the local Syslog daemon."
+    ::= { prvtEfmOamObjects 4 }
+
+prvtEfmOamPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Priority of the sent OAM PDUs."
+    ::= { prvtEfmOamObjects 5 }
+
+prvtEfmOamPriorityEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/disable EFM-OAM PDU priority"
+    ::= { prvtEfmOamObjects 6 }
+
+prvtEfmOamKeepAliveInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (200..15000)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Aging interval (in miliseconds)of the last heard
+         neighbouring device."
+    ::= { prvtEfmOamObjects 7 }
+
+prvtEfmOamHelloInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (100..5000)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Maximal interval between a pair of PDUs in milliseconds."
+    ::= { prvtEfmOamObjects 8 }
+
+prvtEfmOamHistoryLimit OBJECT-TYPE
+    SYNTAX      Unsigned32 (1000..10000)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Number of entries in EFM_OAM history."
+    ::= { prvtEfmOamObjects 9 }
+
+prvtEfmOamHistoryCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of entries in efm-oam history."
+    ::= { prvtEfmOamObjects 10 }
+
+prvtEfmOamHistoryClear OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), clear(1) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Clear efm-oam history."
+    ::= { prvtEfmOamObjects 11 }
+
+prvtEfmOamPacketSent OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Efm-oam PDU's sent."
+    ::= { prvtEfmOamObjects 12 }
+
+prvtEfmOamPacketReceived OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Efm-oam PDU's received."
+    ::= { prvtEfmOamObjects 13 }
+
+prvtEfmOamLocalMac OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local mac address."
+    ::= { prvtEfmOamObjects 14 }
+
+prvtEfmOamPingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamPingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table let the EFM-OAM non-intrusive monitoring
+         on the specific interface by querying a number
+         of time aFramesTransmittedOK parameter, ping requests,
+         using the variable retrieval EFM OAM PDU.
+         Ping operation procedure:
+         1. Set prvtEfmOamPingRowStatus to CreateandWait
+         2. Configure parameters that are different from default
+         3. Set prvtEfmOamPingStatus to startPing
+         4. Set prvtEfmOamPingRowStatus to Active to start the operation. 
+         
+         If the operation is performed from cli, at the end prvtEfmOamPingStatus 
+         is set to stopPing and if is perfomed from SNMP  
+         prvtEfmOamPingStatus is set to startPing."
+    ::= { prvtEfmOamObjects 15 }
+
+prvtEfmOamPingEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamPingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPingEntry"
+    INDEX       { ifIndex }
+    ::= { prvtEfmOamPingTable 1 }
+
+PrvtEfmOamPingEntry ::= SEQUENCE {
+    prvtEfmOamPingRowStatus     RowStatus,
+    prvtEfmOamPingStatus        INTEGER,
+    prvtEfmOamPingEchoNumber    Unsigned32,
+    prvtEfmOamPingDelayTime     Unsigned32,
+    prvtEfmOamPingTimeOut       Unsigned32,
+    prvtEfmOamPingResultClear   INTEGER
+}
+
+prvtEfmOamPingRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Creation/delete/edit of the ping test."
+    ::= { prvtEfmOamPingEntry 1 }
+
+prvtEfmOamPingStatus OBJECT-TYPE
+    SYNTAX      INTEGER { startPing(1), stopPing(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Ping status."
+    ::= { prvtEfmOamPingEntry 2 }
+
+prvtEfmOamPingEchoNumber OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The number of echo packets to send."
+    ::= { prvtEfmOamPingEntry 3 }
+
+prvtEfmOamPingDelayTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The delay in seconds between packets."
+    ::= { prvtEfmOamPingEntry 4 }
+
+prvtEfmOamPingTimeOut OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The time in seconds which the ping
+         should wait for the response."
+    ::= { prvtEfmOamPingEntry 5 }
+
+prvtEfmOamPingResultClear OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), clear(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Delete per interface entries in prvtEfmOamPingResultTable."
+    ::= { prvtEfmOamPingEntry 6 }
+
+prvtEfmOamPingResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamPingResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Ping results table."
+    ::= { prvtEfmOamObjects 16 }
+
+prvtEfmOamPingResultEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamPingResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPingResultEntry"
+    INDEX       { ifIndex }
+    ::= { prvtEfmOamPingResultTable 1 }
+
+PrvtEfmOamPingResultEntry ::= SEQUENCE {
+    prvtEfmOamPingResultStatus              INTEGER,
+    prvtEfmOamPingResultSentPackets         Counter32,
+    prvtEfmOamPingResultReceivedPackets     Counter32,
+    prvtEfmOamPingResultReceiveRate         Unsigned32,
+    prvtEfmOamPingResultTimeMin             Unsigned32,
+    prvtEfmOamPingResultTimeMax             Unsigned32,
+    prvtEfmOamPingResultAverageTime         Unsigned32
+}
+
+prvtEfmOamPingResultStatus OBJECT-TYPE
+    SYNTAX      INTEGER { noPing(1), running(2), terminated(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Current ping operation status."
+    ::= { prvtEfmOamPingResultEntry 1 }
+
+prvtEfmOamPingResultSentPackets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Sent packets"
+    ::= { prvtEfmOamPingResultEntry 2 }
+
+prvtEfmOamPingResultReceivedPackets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Received packets"
+    ::= { prvtEfmOamPingResultEntry 3 }
+
+prvtEfmOamPingResultReceiveRate OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Received rate"
+    ::= { prvtEfmOamPingResultEntry 4 }
+
+prvtEfmOamPingResultTimeMin OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Ping minimum time."
+    ::= { prvtEfmOamPingResultEntry 5 }
+
+prvtEfmOamPingResultTimeMax OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Ping maximum time."
+    ::= { prvtEfmOamPingResultEntry 6 }
+
+prvtEfmOamPingResultAverageTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Ping average time - Integer part."
+    ::= { prvtEfmOamPingResultEntry 7 }
+
+prvtEfmOamLoopbackTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamLoopbackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table should permit to perform EFM-OAM
+         intrusive monitoring on the specific interface
+         by setting the remote device into loopback state
+         and generating test traffic.
+         It should support:
+         Storm operation, an operation that sets
+         remote loopback, stops local data flow to the
+         remote box and generates a packet burst by CPU.
+         When the burst is received back it is validated
+         and statistics are displayed. Burst operation,
+         an operation that sets remote loopback, stops
+         local data flow to the remote box and generates
+         a packet test burst by the hardware (when available).
+         It means a single packet generated by CPU is
+         repetitively sent by the hardware. When the
+         burst is received back it is ignored and only
+         counters are displayed.
+         Loopback storm operation procedure:
+         1. Set prvtEfmOamLoopbackRowStatus to CreateandWait
+         2. Configure prvtEfmOamLoopbackType to set the operation
+         3. Configure other parameters that are different from default
+         4. Set prvtEfmOamLoopbackStatus to initiatingLoopback
+         5. Set prvtEfmOamLoopbackRowStatus to Active to start the operation. 
+         
+         If the operation is performed from cli, at the end prvtEfmOamLoopbackStatus 
+         is set to terminatingLoopback and if is perfomed from SNMP  
+         prvtEfmOamLoopbackStatus is set to initiatingLoopback."
+    ::= { prvtEfmOamObjects 17 }
+
+prvtEfmOamLoopbackEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamLoopbackEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamLoopbackEntry"
+    INDEX       { ifIndex }
+    ::= { prvtEfmOamLoopbackTable 1 }
+
+PrvtEfmOamLoopbackEntry ::= SEQUENCE {
+    prvtEfmOamLoopbackRowStatus     RowStatus,
+    prvtEfmOamLoopbackType          INTEGER,
+    prvtEfmOamLoopbackStatus        INTEGER,
+    prvtEfmOamLoopbackCount         Unsigned32,
+    prvtEfmOamLoopbackPacketSize    Unsigned32,
+    prvtEfmOamLoopbackDelay         Unsigned32,
+    prvtEfmOamLoopbackTimeout       Unsigned32,
+    prvtEfmOamLoopbackResultsClear  INTEGER
+}
+
+prvtEfmOamLoopbackRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Entry rowStatus"
+    ::= { prvtEfmOamLoopbackEntry 1 }
+
+prvtEfmOamLoopbackType OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), storm(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Loopback type"
+    ::= { prvtEfmOamLoopbackEntry 2 }
+
+prvtEfmOamLoopbackStatus OBJECT-TYPE
+    SYNTAX      INTEGER { initiatingLoopback(2), terminatingLoopback(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Loopback status"
+    ::= { prvtEfmOamLoopbackEntry 3 }
+
+prvtEfmOamLoopbackCount OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Represent the count of packets to send in storm operation."
+    ::= { prvtEfmOamLoopbackEntry 4 }
+
+prvtEfmOamLoopbackPacketSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (64..1512)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Represent the size of the test packet to use."
+    ::= { prvtEfmOamLoopbackEntry 5 }
+
+prvtEfmOamLoopbackDelay OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Represent the delay between packets in seconds.
+         The default value is 0 and represents no delay."
+    ::= { prvtEfmOamLoopbackEntry 6 }
+
+prvtEfmOamLoopbackTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Represent the wait for response in seconds."
+    ::= { prvtEfmOamLoopbackEntry 7 }
+
+prvtEfmOamLoopbackResultsClear OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), clear(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Clear loopback results for this ifIndex."
+    ::= { prvtEfmOamLoopbackEntry 8 }
+
+prvtEfmOamLoopbackResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamLoopbackResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Loopback results."
+    ::= { prvtEfmOamObjects 18 }
+
+prvtEfmOamLoopbackResultEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamLoopbackResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtEfmOamLoopbackResultTable"
+    INDEX       { ifIndex }
+    ::= { prvtEfmOamLoopbackResultTable 1 }
+
+PrvtEfmOamLoopbackResultEntry ::= SEQUENCE {
+    prvtEfmOamLoopbackResultStatus              INTEGER,
+    prvtEfmOamLoopbackResultSentPackets         Counter32,
+    prvtEfmOamLoopbackResultReceivedPackets     Counter32,
+    prvtEfmOamLoopbackResultRateBurst           OCTET STRING,
+    prvtEfmOamLoopbackResultLocalInOctets       OCTET STRING,
+    prvtEfmOamLoopbackResultLocalOutOctets      OCTET STRING,
+    prvtEfmOamLoopbackResultLocalInUcastPkts    OCTET STRING,
+    prvtEfmOamLoopbackResultLocalOutUcastPkts   OCTET STRING,
+    prvtEfmOamLoopbackResultLocalInNUcastPkts   OCTET STRING,
+    prvtEfmOamLoopbackResultLocalOutNUcastPkts  OCTET STRING,
+    prvtEfmOamLoopbackResultLocalInDiscards     OCTET STRING,
+    prvtEfmOamLoopbackResultLocalOutDiscards    OCTET STRING,
+    prvtEfmOamLoopbackResultLocalInErrors       OCTET STRING,
+    prvtEfmOamLoopbackResultLocalOutErrors      OCTET STRING
+}
+
+prvtEfmOamLoopbackResultStatus OBJECT-TYPE
+    SYNTAX      INTEGER { noLoopback(1), startCmdSent(2), startFail(3), 
+                    dataStarted(4), stopCmdSent(5), terminated(6), 
+                    remoteFailure(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Loopback result status"
+    ::= { prvtEfmOamLoopbackResultEntry 1 }
+
+prvtEfmOamLoopbackResultSentPackets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Sent packets"
+    ::= { prvtEfmOamLoopbackResultEntry 2 }
+
+prvtEfmOamLoopbackResultReceivedPackets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Received packets"
+    ::= { prvtEfmOamLoopbackResultEntry 3 }
+
+prvtEfmOamLoopbackResultRateBurst OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Loopback burst rate"
+    ::= { prvtEfmOamLoopbackResultEntry 4 }
+
+prvtEfmOamLoopbackResultLocalInOctets OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local inoctets."
+    ::= { prvtEfmOamLoopbackResultEntry 5 }
+
+prvtEfmOamLoopbackResultLocalOutOctets OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local outoctets"
+    ::= { prvtEfmOamLoopbackResultEntry 6 }
+
+prvtEfmOamLoopbackResultLocalInUcastPkts OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local inucastpkts"
+    ::= { prvtEfmOamLoopbackResultEntry 7 }
+
+prvtEfmOamLoopbackResultLocalOutUcastPkts OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local outucastpkts"
+    ::= { prvtEfmOamLoopbackResultEntry 8 }
+
+prvtEfmOamLoopbackResultLocalInNUcastPkts OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local innucastpkts"
+    ::= { prvtEfmOamLoopbackResultEntry 9 }
+
+prvtEfmOamLoopbackResultLocalOutNUcastPkts OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local outnucastpkts"
+    ::= { prvtEfmOamLoopbackResultEntry 10 }
+
+prvtEfmOamLoopbackResultLocalInDiscards OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local indiscards"
+    ::= { prvtEfmOamLoopbackResultEntry 11 }
+
+prvtEfmOamLoopbackResultLocalOutDiscards OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local outdiscards"
+    ::= { prvtEfmOamLoopbackResultEntry 12 }
+
+prvtEfmOamLoopbackResultLocalInErrors OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local inerrors"
+    ::= { prvtEfmOamLoopbackResultEntry 13 }
+
+prvtEfmOamLoopbackResultLocalOutErrors OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local outerrors"
+    ::= { prvtEfmOamLoopbackResultEntry 14 }
+
+prvtEfmOamPeerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamPeerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table holds the peer extended information
+         available only when local interface is set in
+         enhanced mode (see prvtOamEnhanceMode) and the
+         remote is detected as enhanced-mode device. This table
+         shall containg an entry per physical interface,
+         indexed by the corresponding ifIndex from IF-MIB."
+    ::= { prvtEfmOamObjects 19 }
+
+prvtEfmOamPeerEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamPeerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerEntry"
+    INDEX       { ifIndex }
+    ::= { prvtEfmOamPeerTable 1 }
+
+PrvtEfmOamPeerEntry ::= SEQUENCE {
+    prvtEfmOamPeerMacAddress            MacAddress,
+    prvtEfmOamPeerVendorOui             OCTET STRING,
+    prvtEfmOamPeerVendorInfo            Unsigned32,
+    prvtEfmOamPeerRole                  INTEGER,
+    prvtEfmOamPeerMaxOamPduSize         Unsigned32,
+    prvtEfmOamPeerConfigRevision        Unsigned32,
+    prvtEfmOamPeerFunctionsSupported    BITS,
+    prvtEfmOamPeerPort                  OCTET STRING,
+    prvtEfmOamPeerName                  OCTET STRING,
+    prvtEfmOamPeerMode                  INTEGER
+}
+
+prvtEfmOamPeerMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerMacAddress"
+    ::= { prvtEfmOamPeerEntry 1 }
+
+prvtEfmOamPeerVendorOui OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerVendorOui"
+    ::= { prvtEfmOamPeerEntry 2 }
+
+prvtEfmOamPeerVendorInfo OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerVendorInfo"
+    ::= { prvtEfmOamPeerEntry 3 }
+
+prvtEfmOamPeerRole OBJECT-TYPE
+    SYNTAX      INTEGER { passive(1), active(2), unknown(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerRole"
+    ::= { prvtEfmOamPeerEntry 4 }
+
+prvtEfmOamPeerMaxOamPduSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerMaxOamPduSize"
+    ::= { prvtEfmOamPeerEntry 5 }
+
+prvtEfmOamPeerConfigRevision OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerConfigRevision"
+    ::= { prvtEfmOamPeerEntry 6 }
+
+prvtEfmOamPeerFunctionsSupported OBJECT-TYPE
+    SYNTAX      BITS { unidirectionalSupport(0), loopbackSupport(1), 
+                    eventSupport(2), variableSupport(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerFunctionsSupprted"
+    ::= { prvtEfmOamPeerEntry 7 }
+
+prvtEfmOamPeerPort OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerPort"
+    ::= { prvtEfmOamPeerEntry 8 }
+
+prvtEfmOamPeerName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamPeerName"
+    ::= { prvtEfmOamPeerEntry 9 }
+
+prvtEfmOamPeerMode OBJECT-TYPE
+    SYNTAX      INTEGER { basic(1), enhanced(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Enhanced mode."
+    ::= { prvtEfmOamPeerEntry 10 }
+
+prvtEfmOamStatisticsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamStatisticsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsTable"
+    ::= { prvtEfmOamObjects 20 }
+
+prvtEfmOamStatisticsEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamStatisticsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsEntry"
+    INDEX       { ifIndex }
+    ::= { prvtEfmOamStatisticsTable 1 }
+
+PrvtEfmOamStatisticsEntry ::= SEQUENCE {
+    prvtEfmOamStatisticsInformationTx                   Counter32,
+    prvtEfmOamStatisticsInformationRx                   Counter32,
+    prvtEfmOamStatisticsUniqueEventNotificationTx       Counter32,
+    prvtEfmOamStatisticsUniqueEventNotificationRx       Counter32,
+    prvtEfmOamStatisticsDuplicateEventNotificationTx    Counter32,
+    prvtEfmOamStatisticsDuplicateEventNotificationRx    Counter32,
+    prvtEfmOamStatisticsLoopbackControlTx               Counter32,
+    prvtEfmOamStatisticsLoopbackControlRx               Counter32,
+    prvtEfmOamStatisticsVariableRequestTx               Counter32,
+    prvtEfmOamStatisticsVariableRequestRx               Counter32,
+    prvtEfmOamStatisticsVariableResponseTx              Counter32,
+    prvtEfmOamStatisticsVariableResponseRx              Counter32,
+    prvtEfmOamStatisticsOrganizationSpecificTx          Counter32,
+    prvtEfmOamStatisticsOrganizationSpecificRx          Counter32,
+    prvtEfmOamStatisticsUnsupportedCodesTx              Counter32,
+    prvtEfmOamStatisticsUnsupportedCodesRx              Counter32,
+    prvtEfmOamStatisticsFramesLostDueToOam              Counter32
+}
+
+prvtEfmOamStatisticsInformationTx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsInformationTx"
+    ::= { prvtEfmOamStatisticsEntry 1 }
+
+prvtEfmOamStatisticsInformationRx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsInformationRx"
+    ::= { prvtEfmOamStatisticsEntry 2 }
+
+prvtEfmOamStatisticsUniqueEventNotificationTx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsUniqueEventNotificationTx"
+    ::= { prvtEfmOamStatisticsEntry 3 }
+
+prvtEfmOamStatisticsUniqueEventNotificationRx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsUniqueEventNotificationRx"
+    ::= { prvtEfmOamStatisticsEntry 4 }
+
+prvtEfmOamStatisticsDuplicateEventNotificationTx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsDuplicateEventNotificationTx"
+    ::= { prvtEfmOamStatisticsEntry 5 }
+
+prvtEfmOamStatisticsDuplicateEventNotificationRx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsDuplicateEventNotificationRx"
+    ::= { prvtEfmOamStatisticsEntry 6 }
+
+prvtEfmOamStatisticsLoopbackControlTx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsLoopbackControlTx"
+    ::= { prvtEfmOamStatisticsEntry 7 }
+
+prvtEfmOamStatisticsLoopbackControlRx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsLoopbackControlRx"
+    ::= { prvtEfmOamStatisticsEntry 8 }
+
+prvtEfmOamStatisticsVariableRequestTx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsVariableRequestTx"
+    ::= { prvtEfmOamStatisticsEntry 9 }
+
+prvtEfmOamStatisticsVariableRequestRx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsVariableRequestRx"
+    ::= { prvtEfmOamStatisticsEntry 10 }
+
+prvtEfmOamStatisticsVariableResponseTx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsVariableResponseTx"
+    ::= { prvtEfmOamStatisticsEntry 11 }
+
+prvtEfmOamStatisticsVariableResponseRx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsVariableResponseRx"
+    ::= { prvtEfmOamStatisticsEntry 12 }
+
+prvtEfmOamStatisticsOrganizationSpecificTx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsOrganizationSpecificTx"
+    ::= { prvtEfmOamStatisticsEntry 13 }
+
+prvtEfmOamStatisticsOrganizationSpecificRx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsOrganizationSpecificRx"
+    ::= { prvtEfmOamStatisticsEntry 14 }
+
+prvtEfmOamStatisticsUnsupportedCodesTx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsUnsupportedCodesTx"
+    ::= { prvtEfmOamStatisticsEntry 15 }
+
+prvtEfmOamStatisticsUnsupportedCodesRx OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsUnsupportedCodesRx"
+    ::= { prvtEfmOamStatisticsEntry 16 }
+
+prvtEfmOamStatisticsFramesLostDueToOam OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamStatisticsFramesLostDueToOam"
+    ::= { prvtEfmOamStatisticsEntry 17 }
+
+prvtEfmOamEventConfigTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamEventConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Enable Event Notifications and configure the thresholds."
+    ::= { prvtEfmOamObjects 21 }
+
+prvtEfmOamEventConfigEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamEventConfigEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry containing management information
+         applicable to a particular interface"
+    INDEX       { ifIndex }
+    ::= { prvtEfmOamEventConfigTable 1 }
+
+PrvtEfmOamEventConfigEntry ::= SEQUENCE {
+    prvtEfmOamEventConfigErrorSymbolPeriodWindow                    Unsigned32,
+    prvtEfmOamEventConfigErrorSymbolPeriodThreshold                 Unsigned32,
+    prvtEfmOamEventConfigErrorSymbolPeriodEventNotificationEnable   TruthValue,
+    prvtEfmOamEventConfigErrorFrameWindow                           Unsigned32,
+    prvtEfmOamEventConfigErrorFrameThreshold                        Unsigned32,
+    prvtEfmOamEventConfigErrorFrameEventNotificationEnable          TruthValue,
+    prvtEfmOamEventConfigDyingGaspEnable                            TruthValue
+}
+
+prvtEfmOamEventConfigErrorSymbolPeriodWindow OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "If prvtEfmOamEventConfigErrorSymbolPeriodThreshold symbol
+         errors occur within a window of prvtEfmOamEventConfigErrorSymbolPeriodWindow
+         symbols, an Event Notification OAMPDU should be
+         generated with an Errored Symbol Period Event TLV
+         indicating that the threshold has been crossed in this window."
+    ::= { prvtEfmOamEventConfigEntry 1 }
+
+prvtEfmOamEventConfigErrorSymbolPeriodThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1000000000)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "If prvtEfmOamEventConfigErrorSymbolPeriodThreshold symbol
+         errors occur within a window of prvtEfmOamEventConfigErrorSymbolPeriodWindow
+         symbols, an Event Notification OAMPDU should be generated with an Errored Symbol
+         Period Event TLV indicating that the threshold has been
+         crossed in this window."
+    ::= { prvtEfmOamEventConfigEntry 2 }
+
+prvtEfmOamEventConfigErrorSymbolPeriodEventNotificationEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "If true, the OAM entity should send an Event Notification
+         OAMPDU when an Errored Symbol Period Event occurs."
+    ::= { prvtEfmOamEventConfigEntry 3 }
+
+prvtEfmOamEventConfigErrorFrameWindow OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Symbol period monitor interval in seconds"
+    ::= { prvtEfmOamEventConfigEntry 4 }
+
+prvtEfmOamEventConfigErrorFrameThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The amount of time over which the
+         threshold is defined."
+    ::= { prvtEfmOamEventConfigEntry 5 }
+
+prvtEfmOamEventConfigErrorFrameEventNotificationEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "If true, the OAM entity should send an Event
+         Notification OAMPDU when an Errored Frame Event occurs"
+    ::= { prvtEfmOamEventConfigEntry 6 }
+
+prvtEfmOamEventConfigDyingGaspEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "If true, the local OAM entity should attempt to indicate a
+         dying gasp via the OAMPDU flags field to its peer OAM entity
+         when a dying gasp event occurs."
+    ::= { prvtEfmOamEventConfigEntry 7 }
+
+prvtEfmOamEventLogTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamEventLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogTable"
+    ::= { prvtEfmOamObjects 22 }
+
+prvtEfmOamEventLogEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamEventLogEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogEntry"
+    INDEX       { ifIndex, prvtEfmOamEventLogId }
+    ::= { prvtEfmOamEventLogTable 1 }
+
+PrvtEfmOamEventLogEntry ::= SEQUENCE {
+    prvtEfmOamEventLogId            Unsigned32,
+    prvtEfmOamEventLogTimeStamp     Unsigned32,
+    prvtEfmOamEventLogOui           OCTET STRING,
+    prvtEfmOamEventLogType          INTEGER,
+    prvtEfmOamEventLogLocation      INTEGER,
+    prvtEfmOamEventLogWindow        Counter64,
+    prvtEfmOamEventLogThreshold     Counter64,
+    prvtEfmOamEventLogValue         Counter64,
+    prvtEfmOamEventLogRunningTotal  Counter64,
+    prvtEfmOamEventLogEventTotal    Unsigned32
+}
+
+prvtEfmOamEventLogId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogId"
+    ::= { prvtEfmOamEventLogEntry 1 }
+
+prvtEfmOamEventLogTimeStamp OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogTimeStamp"
+    ::= { prvtEfmOamEventLogEntry 2 }
+
+prvtEfmOamEventLogOui OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogOui"
+    ::= { prvtEfmOamEventLogEntry 3 }
+
+prvtEfmOamEventLogType OBJECT-TYPE
+    SYNTAX      INTEGER { erroredSymbolEvent(1), 
+                    erroredFramePeriodEvent(2), erroredFrameEvent(3), 
+                    erroredFrameSecondsEvent(4), linkFault(256), 
+                    dyingGaspEvent(257), criticalEvent(258) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogType"
+    ::= { prvtEfmOamEventLogEntry 4 }
+
+prvtEfmOamEventLogLocation OBJECT-TYPE
+    SYNTAX      INTEGER { local(1), remote(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogLocation"
+    ::= { prvtEfmOamEventLogEntry 5 }
+
+prvtEfmOamEventLogWindow OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogWindow"
+    ::= { prvtEfmOamEventLogEntry 6 }
+
+prvtEfmOamEventLogThreshold OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogThreshold"
+    ::= { prvtEfmOamEventLogEntry 7 }
+
+prvtEfmOamEventLogValue OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogValue"
+    ::= { prvtEfmOamEventLogEntry 8 }
+
+prvtEfmOamEventLogRunningTotal OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogRunningTotal"
+    ::= { prvtEfmOamEventLogEntry 9 }
+
+prvtEfmOamEventLogEventTotal OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamEventLogEventTotal"
+    ::= { prvtEfmOamEventLogEntry 10 }
+
+prvtEfmOamInterfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamInterfaceTable"
+    ::= { prvtEfmOamObjects 23 }
+
+prvtEfmOamInterfaceEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtEfmOamInterfaceEntry"
+    INDEX       { ifIndex }
+    ::= { prvtEfmOamInterfaceTable 1 }
+
+PrvtEfmOamInterfaceEntry ::= SEQUENCE {
+    prvtEfmOamInterfaceEnable                   TruthValue,
+    prvtEfmOamInterfaceOperStatus               INTEGER,
+    prvtEfmOamInterfaceRole                     INTEGER,
+    prvtEfmOamInterfaceMaxPduSize               Unsigned32,
+    prvtEfmOamInterfaceConfigRevision           Unsigned32,
+    prvtEfmOamInterfaceFunctionsSupported       BITS,
+    prvtEfmOamInterfacePacketSent               Unsigned32,
+    prvtEfmOamInterfacePacketReceived           Unsigned32,
+    prvtEfmOamInterfaceMode                     INTEGER,
+    prvtEfmOamInterfaceLoopbackStatus           INTEGER,
+    prvtEfmOamInterfaceAcceptLoopbackCommands   TruthValue,
+    prvtEfmOamInterfaceEventReturnShutdown      Unsigned32
+}
+
+prvtEfmOamInterfaceEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/disable efm-oam protocol per port."
+    ::= { prvtEfmOamInterfaceEntry 1 }
+
+prvtEfmOamInterfaceOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { disabled(1), linkFault(2), passiveWait(3), 
+                    activeSendLocal(4), sendLocalAndRemote(5), 
+                    sendLocalAndRemoteOk(6), 
+                    oamPeeringLocallyRejected(7), 
+                    oamPeeringRemoteRejected(8), operational(9), 
+                    nonOperHalfDuplex(10) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Interface efm-oam operational status"
+    ::= { prvtEfmOamInterfaceEntry 2 }
+
+prvtEfmOamInterfaceRole OBJECT-TYPE
+    SYNTAX      INTEGER { passive(1), active(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Interface efm-oam mode."
+    ::= { prvtEfmOamInterfaceEntry 3 }
+
+prvtEfmOamInterfaceMaxPduSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Efm-oam max PDU size."
+    ::= { prvtEfmOamInterfaceEntry 4 }
+
+prvtEfmOamInterfaceConfigRevision OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Config revision."
+    ::= { prvtEfmOamInterfaceEntry 5 }
+
+prvtEfmOamInterfaceFunctionsSupported OBJECT-TYPE
+    SYNTAX      BITS { unidirectionalSupport(0), loopbackSupport(1), 
+                    eventSupport(2), variableSupport(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Supported functions."
+    ::= { prvtEfmOamInterfaceEntry 6 }
+
+prvtEfmOamInterfacePacketSent OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Efm-oam PDU's sent."
+    ::= { prvtEfmOamInterfaceEntry 7 }
+
+prvtEfmOamInterfacePacketReceived OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Efm-oam PDU's received."
+    ::= { prvtEfmOamInterfaceEntry 8 }
+
+prvtEfmOamInterfaceMode OBJECT-TYPE
+    SYNTAX      INTEGER { basic(1), enhanced(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Efm-oam enhanced mode."
+    ::= { prvtEfmOamInterfaceEntry 9 }
+
+prvtEfmOamInterfaceLoopbackStatus OBJECT-TYPE
+    SYNTAX      INTEGER { noLoopback(1), initiatingLoopback(2), 
+                    remoteLoopback(3), terminatingLoopback(4), 
+                    localLoopback(5), unknownLoopback(6) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Efm-oam interface loopback status"
+    ::= { prvtEfmOamInterfaceEntry 10 }
+
+prvtEfmOamInterfaceAcceptLoopbackCommands OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Efm-oam interface accept loopback commands"
+    ::= { prvtEfmOamInterfaceEntry 11 }
+
+prvtEfmOamInterfaceEventReturnShutdown OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..10)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The number of handshaking attempts before shutting down the port (value 0 disable it)."
+    ::= { prvtEfmOamInterfaceEntry 12 }
+
+prvtEfmOamEventForwardStatusTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamEventForwardStatusEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Forward event status table."
+    ::= { prvtEfmOamObjects 24 }
+
+prvtEfmOamEventForwardStatusEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamEventForwardStatusEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in EventForwardStatusTable"
+    INDEX       { ifIndex, prvtEfmOamEventForwardStatusIdx }
+    ::= { prvtEfmOamEventForwardStatusTable 1 }
+
+PrvtEfmOamEventForwardStatusEntry ::= SEQUENCE {
+    prvtEfmOamEventForwardStatusIdx         InterfaceIndex,
+    prvtEfmOamEventForwardStatusRowStatus   RowStatus
+}
+
+prvtEfmOamEventForwardStatusIdx OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface to which status will be forwarded"
+    ::= { prvtEfmOamEventForwardStatusEntry 1 }
+
+prvtEfmOamEventForwardStatusRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus of prvtEfmOamEventForwardStatusEntry "
+    ::= { prvtEfmOamEventForwardStatusEntry 2 }
+
+prvtEfmOamEventForwardShutdownTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEfmOamEventForwardShutdownEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Forward event status table."
+    ::= { prvtEfmOamObjects 25 }
+
+prvtEfmOamEventForwardShutdownEntry OBJECT-TYPE
+    SYNTAX      PrvtEfmOamEventForwardShutdownEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in EventForwardShutdownTable"
+    INDEX       { ifIndex, prvtEfmOamEventForwardShutdownIdx }
+    ::= { prvtEfmOamEventForwardShutdownTable 1 }
+
+PrvtEfmOamEventForwardShutdownEntry ::= SEQUENCE {
+    prvtEfmOamEventForwardShutdownIdx           InterfaceIndex,
+    prvtEfmOamEventForwardShutdownRowStatus     RowStatus
+}
+
+prvtEfmOamEventForwardShutdownIdx OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface to which status will be forwarded"
+    ::= { prvtEfmOamEventForwardShutdownEntry 1 }
+
+prvtEfmOamEventForwardShutdownRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus of prvtEfmOamEventForwardShutdownEntry "
+    ::= { prvtEfmOamEventForwardShutdownEntry 2 }
+
+prvtEfmOamLoopBackState NOTIFICATION-TYPE
+    OBJECTS     { prvtEfmOamInterfaceEnable, prvtEfmOamInterfaceRole, 
+                  prvtEfmOamInterfaceLoopbackStatus }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the loopback
+         state has been change from remote, when
+         prvtEfmOamInterfaceRole is passive or
+         prvtEfmOamInterfaceEnable is false the
+         interface cannot be on remoteLoopback state
+         and should send this trap."
+    ::= { prvtEfmOamNotifications 1 }
+
+prvtEfmOamDyingGasp NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "The notification alarms for a failure due to
+         loss of local power - Dying Gasp"
+    ::= { prvtEfmOamNotifications 2 }
+
+prvtEfmOamThresholdEvent NOTIFICATION-TYPE
+    OBJECTS     { prvtEfmOamEventLogTimeStamp, prvtEfmOamEventLogOui, 
+                  prvtEfmOamEventLogType, prvtEfmOamEventLogLocation, 
+                  prvtEfmOamEventLogWindow, prvtEfmOamEventLogThreshold, 
+                  prvtEfmOamEventLogValue, 
+                  prvtEfmOamEventLogRunningTotal, 
+                  prvtEfmOamEventLogEventTotal }
+    STATUS      current
+    DESCRIPTION 
+        "A prvtEfmOamThresholdEvent notification is sent when a local or
+         remote threshold crossing event is detected. A local
+         threshold crossing event is detected by the local entity,
+         while a remote threshold crossing event is detected by the
+         reception of an Ethernet OAM Event Notification OAMPDU
+         that indicates a threshold event.
+         
+         The OAM entity can be derived from extracting the ifIndex from
+         the variable bindings. The objects in the notification
+         correspond to the values in a row instance in the
+         prvtEfmOamEventLogTable.
+         
+         The management entity should periodically check
+         prvtEfmOamEventLogTable to detect any missed events."
+    ::= { prvtEfmOamNotifications 3 }
+
+prvtEfmOamNonThresholdEvent NOTIFICATION-TYPE
+    OBJECTS     { prvtEfmOamEventLogTimeStamp, prvtEfmOamEventLogOui, 
+                  prvtEfmOamEventLogType, prvtEfmOamEventLogLocation, 
+                  prvtEfmOamEventLogEventTotal }
+    STATUS      current
+    DESCRIPTION 
+        "A prvtEfmOamNonThresholdEvent notification is sent when a local
+         or remote non-threshold crossing event is detected. A local
+         event is detected by the local entity, while a remote event is
+         detected by the reception of an Ethernet OAM Event
+         Notification OAMPDU that indicates a non-threshold crossing
+         event.
+         
+         The OAM entity can be derived from extracting the ifIndex from
+         the variable bindings. The objects in the notification
+         correspond to the values in a row instance of the
+         prvtEfmOamEventLogTable.
+         
+         The management entity should periodically check
+         prvtEfmOamEventLogTable to detect any missed events."
+    ::= { prvtEfmOamNotifications 4 }
+
+END -- end of module PRVT-EFM-OAM-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-EPS-MIB b/MIBS/telco-systems/binox/PRVT-EPS-MIB
new file mode 100644
index 0000000..8340e3e
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-EPS-MIB
@@ -0,0 +1,536 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-EPS-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-EPS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtEpsMIB MODULE-IDENTITY
+    LAST-UPDATED "201011110000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Private MIB supporting Linear Ethernet Protection Switching (ITU-T G.8031)"
+    REVISION    "201011110000Z"
+    DESCRIPTION 
+        "Initial"
+    ::= { switch 132 }
+
+
+PrvtEpsProtectionStateType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Possible protection states for an end device."
+    SYNTAX      INTEGER { none(-1), noRequest(0), doNotRevert(1), 
+                    reverseRequest(2), exercise(4), waitToRestore(5), 
+                    clear(6), manualSwitch(7), signalDegrade(9), 
+                    signalFail(11), forcedSwitch(13), 
+                    signalFailForProtection(14), lockoutOfProtection(15) }
+
+PrvtEpsActionType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Used to perform an action.
+         Setting to 'performAction' will cause the action to be performed.
+         Setting to 'idle' (or any other value except 'performAction') has
+         no effect (no action is performed).
+         Reads will always return 'idle'."
+    SYNTAX      INTEGER { idle(1), performAction(2) }
+
+prvtEpsMIBNotifications OBJECT IDENTIFIER
+    ::= { prvtEpsMIB 0 }
+
+prvtEpsMIBObjects OBJECT IDENTIFIER
+    ::= { prvtEpsMIB 1 }
+
+prvtEpsService OBJECT IDENTIFIER
+    ::= { prvtEpsMIBObjects 1 }
+
+prvtEpsServiceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEpsServiceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains Ethernet Protection Switching services information."
+    ::= { prvtEpsService 1 }
+
+prvtEpsServiceEntry OBJECT-TYPE
+    SYNTAX      PrvtEpsServiceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Ethernet Protection Switching information about a specific service."
+    INDEX       { prvtEpsSvcId }
+    ::= { prvtEpsServiceTable 1 }
+
+PrvtEpsServiceEntry ::= SEQUENCE {
+    prvtEpsSvcId                            Unsigned32,
+    prvtEpsServiceRowStatus                 RowStatus,
+    prvtEpsServiceCfmMdLevel                Unsigned32,
+    prvtEpsServicePrimaryLocalCfmMep        Unsigned32,
+    prvtEpsServicePrimaryRemoteCfmMep       Unsigned32,
+    prvtEpsServiceSecondaryLocalCfmMep      Unsigned32,
+    prvtEpsServiceSecondaryRemoteCfmMep     Unsigned32,
+    prvtEpsServiceSignalDegradeCfmTestId    Unsigned32,
+    prvtEpsServiceRevertive                 TruthValue,
+    prvtEpsServiceHoldOffTimer              Unsigned32,
+    prvtEpsServiceWaitToRestoreTimer        Unsigned32,
+    prvtEpsServiceAdminFreeze               TruthValue,
+    prvtEpsServiceAdminStatus               INTEGER,
+    prvtEpsServiceActivePath                INTEGER,
+    prvtEpsServiceDefectsPresent            BITS,
+    prvtEpsServiceLocalState                PrvtEpsProtectionStateType,
+    prvtEpsServiceOperationalStatus         TruthValue,
+    prvtEpsServiceLastEvent                 INTEGER,
+    prvtEpsServicePrimaryStatus             INTEGER,
+    prvtEpsServiceSecondaryStatus           INTEGER,
+    prvtEpsServiceRemoteState               PrvtEpsProtectionStateType,
+    prvtEpsServiceRemoteApsChannel          INTEGER,
+    prvtEpsServiceRemoteProtection          INTEGER,
+    prvtEpsServiceRemoteDirection           INTEGER,
+    prvtEpsServiceRemoteRevertive           INTEGER,
+    prvtEpsServiceLocalApsChannel           INTEGER,
+    prvtEpsServiceLocalProtection           INTEGER,
+    prvtEpsServiceLocalDirection            INTEGER,
+    prvtEpsServiceClear                     PrvtEpsActionType,
+    prvtEpsServiceManualSwitch              PrvtEpsActionType,
+    prvtEpsServiceForcedSwitch              PrvtEpsActionType,
+    prvtEpsServiceLockout                   PrvtEpsActionType,
+    prvtEpsServiceProtectionCounter         Unsigned32
+}
+
+prvtEpsSvcId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967294)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The service ID."
+    ::= { prvtEpsServiceEntry 1 }
+
+prvtEpsServiceRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The status of the row.
+         The writable columns in a row can not be changed if the row
+         is active. All columns must have a valid value before a row
+         can be activated."
+    ::= { prvtEpsServiceEntry 2 }
+
+prvtEpsServiceCfmMdLevel OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Value of the CFM MD level where the protected domain is situated."
+    ::= { prvtEpsServiceEntry 3 }
+
+prvtEpsServicePrimaryLocalCfmMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Primary local CFM MEP Id."
+    ::= { prvtEpsServiceEntry 4 }
+
+prvtEpsServicePrimaryRemoteCfmMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Primary remote CFM MEP Id."
+    ::= { prvtEpsServiceEntry 5 }
+
+prvtEpsServiceSecondaryLocalCfmMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Backup local CFM MEP Id."
+    ::= { prvtEpsServiceEntry 6 }
+
+prvtEpsServiceSecondaryRemoteCfmMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Backup remote CFM MEP Id."
+    ::= { prvtEpsServiceEntry 7 }
+
+prvtEpsServiceSignalDegradeCfmTestId OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..256)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ID of the test used for monitoring (either CFM or SAA test).
+         The value 0 indicates no test."
+    ::= { prvtEpsServiceEntry 8 }
+
+prvtEpsServiceRevertive OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Protection type (revertive or non-revertive)."
+    ::= { prvtEpsServiceEntry 9 }
+
+prvtEpsServiceHoldOffTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Value of the Hold Off timer in milliseconds.
+         Valid values are in increments of 100ms."
+    REFERENCE   
+        "G.8031 clause 11.12"
+    ::= { prvtEpsServiceEntry 10 }
+
+prvtEpsServiceWaitToRestoreTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (0 | 5..12)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Value of the Wait To Restore timer in seconds (0 to disable it)."
+    REFERENCE   
+        "G.8031 clause 11.13"
+    ::= { prvtEpsServiceEntry 11 }
+
+prvtEpsServiceAdminFreeze OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used to freeze the state of the protection service."
+    ::= { prvtEpsServiceEntry 12 }
+
+prvtEpsServiceAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administrative status of the protection service."
+    ::= { prvtEpsServiceEntry 13 }
+
+prvtEpsServiceActivePath OBJECT-TYPE
+    SYNTAX      INTEGER { working(0), protection(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Protected service active path."
+    ::= { prvtEpsServiceEntry 14 }
+
+prvtEpsServiceDefectsPresent OBJECT-TYPE
+    SYNTAX      BITS { fullyIncompatibleProvisioning(0), 
+                    protectionSwitchingIncomplete(1), 
+                    protectionConfigurationMismatch(2), 
+                    epsConfigurationMismatch(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Defects registered by the APS protocol could be either none or a composition of bits 0-3:
+         
+         fullyIncompatibleProvisioning(0)   - occurs upon reception of three APS frames with the
+         incompatible 'B' bit value within the 22.5 second period;
+         
+         protectionSwitchingIncomplete(1)   - occurs if the transmitted 'Requested Signal' and the
+         received 'Bridged Signal' do not match for a period of 50ms or longer;
+         
+         protectionConfigurationMismatch(2) - working/protection configuration mismatch, occurs at
+         the reception of three APS frames from the working transport entity within the 22.5 second period;
+         
+         epsConfigurationMismatch(3)        - provisioning mismatch - for example, the local device is
+         set to revertive mode and the remote device is set to non-revertive mode."
+    ::= { prvtEpsServiceEntry 15 }
+
+prvtEpsServiceLocalState OBJECT-TYPE
+    SYNTAX      PrvtEpsProtectionStateType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Protection state of the local side."
+    ::= { prvtEpsServiceEntry 19 }
+
+prvtEpsServiceOperationalStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Identifies whether this service is ready for running.
+         The operational status can be up(true) or down(false).
+         When creating the service the operational
+         status will be down. Receiving CCMs from both transport
+         entities and establishment of APS on the protection transport
+         entity will bring the operational status to up."
+    ::= { prvtEpsServiceEntry 20 }
+
+prvtEpsServiceLastEvent OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(0), switchoverAlarm(1), 
+                    lostCommunication(2), restoredCommunication(3), 
+                    signalFailDetected(4), signalDegradeDetected(5), 
+                    protctSignalFailDetected(6), signalFailRecovery(7), 
+                    signalDegradeRecovery(8), 
+                    protctSignalFailRecovery(9) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The most recent event about which the application has sent a notification."
+    ::= { prvtEpsServiceEntry 21 }
+
+prvtEpsServicePrimaryStatus OBJECT-TYPE
+    SYNTAX      INTEGER { psFailed(0), psOk(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Primary path state."
+    ::= { prvtEpsServiceEntry 22 }
+
+prvtEpsServiceSecondaryStatus OBJECT-TYPE
+    SYNTAX      INTEGER { psFailed(0), psOk(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Secondary path state."
+    ::= { prvtEpsServiceEntry 23 }
+
+prvtEpsServiceRemoteState OBJECT-TYPE
+    SYNTAX      PrvtEpsProtectionStateType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Protection state of the remote side."
+    ::= { prvtEpsServiceEntry 24 }
+
+prvtEpsServiceRemoteApsChannel OBJECT-TYPE
+    SYNTAX      INTEGER { no(0), yes(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Active APS communication reported by the remote."
+    ::= { prvtEpsServiceEntry 25 }
+
+prvtEpsServiceRemoteProtection OBJECT-TYPE
+    SYNTAX      INTEGER { pt1Plus1(0), pt1To1(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Type of protection (1+1 or 1:1) reported by the remote device."
+    ::= { prvtEpsServiceEntry 26 }
+
+prvtEpsServiceRemoteDirection OBJECT-TYPE
+    SYNTAX      INTEGER { dtUnidirectional(0), dtBidirectional(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Type of protection (unidirectional or bidirectional) reported by the remote."
+    ::= { prvtEpsServiceEntry 27 }
+
+prvtEpsServiceRemoteRevertive OBJECT-TYPE
+    SYNTAX      INTEGER { no(0), yes(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Protection type (revertive or non-revertive) reported by the remote."
+    ::= { prvtEpsServiceEntry 28 }
+
+prvtEpsServiceLocalApsChannel OBJECT-TYPE
+    SYNTAX      INTEGER { no(0), yes(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Active APS communication reported by the remote."
+    ::= { prvtEpsServiceEntry 29 }
+
+prvtEpsServiceLocalProtection OBJECT-TYPE
+    SYNTAX      INTEGER { pt1Plus1(0), pt1To1(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Type of protection (1+1 or 1:1) reported by the remote device."
+    ::= { prvtEpsServiceEntry 30 }
+
+prvtEpsServiceLocalDirection OBJECT-TYPE
+    SYNTAX      INTEGER { dtUnidirectional(0), dtBidirectional(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Type of protection (unidirectional or bidirectional) reported by the remote."
+    ::= { prvtEpsServiceEntry 31 }
+
+prvtEpsServiceClear OBJECT-TYPE
+    SYNTAX      PrvtEpsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sends the Clear command to this EPS service."
+    ::= { prvtEpsServiceEntry 32 }
+
+prvtEpsServiceManualSwitch OBJECT-TYPE
+    SYNTAX      PrvtEpsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sends the Manual Switch command to this EPS service."
+    ::= { prvtEpsServiceEntry 33 }
+
+prvtEpsServiceForcedSwitch OBJECT-TYPE
+    SYNTAX      PrvtEpsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sends the Forced Switch command to this EPS service."
+    ::= { prvtEpsServiceEntry 34 }
+
+prvtEpsServiceLockout OBJECT-TYPE
+    SYNTAX      PrvtEpsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sends the LockOut command to this EPS service."
+    ::= { prvtEpsServiceEntry 35 }
+
+prvtEpsServiceProtectionCounter OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Counts how many times the service has gone to Protection."
+    ::= { prvtEpsServiceEntry 36 }
+
+prvtEpsDefectAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsServiceOperationalStatus, 
+                  prvtEpsServiceDefectsPresent }
+    STATUS      current
+    DESCRIPTION 
+        "1. EPS service is either operational or not operational;
+         2. Failure of protocol defects."
+    ::= { prvtEpsMIBNotifications 1 }
+
+prvtEpsSwitchoverAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsServiceActivePath }
+    STATUS      current
+    DESCRIPTION 
+        "The alarm is issued if the active link is changed,
+         pointing to the path where the switchover occured."
+    ::= { prvtEpsMIBNotifications 2 }
+
+prvtEpsLostCommunication NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId }
+    STATUS      current
+    DESCRIPTION 
+        "The alarm is issued in case of non reception of APS frames
+         in three consecutive intervals each representing 5 seconds."
+    ::= { prvtEpsMIBNotifications 3 }
+
+prvtEpsRestoredCommunication NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId }
+    STATUS      current
+    DESCRIPTION 
+        "APS frames are received normally after APS communication failure."
+    ::= { prvtEpsMIBNotifications 4 }
+
+prvtEpsSignalFailDetected NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId }
+    STATUS      current
+    DESCRIPTION 
+        "The alarm is issued in case of CCMs are not received
+         and (3.5 * CCMtime(CCMinterval)) has expired."
+    ::= { prvtEpsMIBNotifications 5 }
+
+prvtEpsSignalDegradeDetected NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId }
+    STATUS      current
+    DESCRIPTION 
+        "The alarm is issued in case of monitored error threshold is crossed:
+         1W Jitter error,
+         2W Jitter error,
+         Latency error,
+         Frame loss error."
+    ::= { prvtEpsMIBNotifications 6 }
+
+prvtEpsProtctSignalFailDetected NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId }
+    STATUS      current
+    DESCRIPTION 
+        "The alarm is issued in case of CCMs are not received on the protected link
+         and (3.5 * CCMtime(CCMinterval)) has expired or the protected link is down."
+    ::= { prvtEpsMIBNotifications 7 }
+
+prvtEpsSignalFailRecovery NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId }
+    STATUS      current
+    DESCRIPTION 
+        "The alarm is issued in case of CCMs start to be received
+         correctly again after a prvtEpsSignalFailDetected alarm occured
+         and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up ."
+    ::= { prvtEpsMIBNotifications 8 }
+
+prvtEpsSignalDegradeRecovery NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId }
+    STATUS      current
+    DESCRIPTION 
+        "The alarm is issued in case of monitored error threshold is crossed bellow limis:
+         1W Jitter error,
+         2W Jitter error,
+         Latency error,
+         Frame loss error."
+    ::= { prvtEpsMIBNotifications 9 }
+
+prvtEpsProtctSignalFailRecovery NOTIFICATION-TYPE
+    OBJECTS     { prvtEpsSvcId }
+    STATUS      current
+    DESCRIPTION 
+        "The alarm is issued in case of CCMs start to be received correctly again
+         on the protected link after a prvtEpsProtctSignalFailDetected alarm occured
+         and (3.5 * CCMtime(CCMinterval)) timer no longer expires or the link is up ."
+    ::= { prvtEpsMIBNotifications 10 }
+
+END -- end of module PRVT-EPS-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-EVENT-PROPAGATION-MIB b/MIBS/telco-systems/binox/PRVT-EVENT-PROPAGATION-MIB
new file mode 100644
index 0000000..41eeb66
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-EVENT-PROPAGATION-MIB
@@ -0,0 +1,377 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-EVENT-PROPAGATION-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-EVENT-PROPAGATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtEventPropagationMIB MODULE-IDENTITY
+    LAST-UPDATED "201411100000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This MIB provides control over the Event Propagation feature"
+    REVISION    "201411100000Z"
+    DESCRIPTION 
+        "Initial version"
+    ::= { switch 166 }
+
+
+prvtEventPropagationObjects OBJECT IDENTIFIER
+    ::= { prvtEventPropagationMIB 1 }
+
+prvtEventPropagationProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEventPropagationProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Profile table holds the settings for the
+         Event Propagation"
+    ::= { prvtEventPropagationObjects 1 }
+
+prvtEventPropagationProfileEntry OBJECT-TYPE
+    SYNTAX      PrvtEventPropagationProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "NONE"
+    INDEX       { prvtEventPropagationProfileName }
+    ::= { prvtEventPropagationProfileTable 1 }
+
+PrvtEventPropagationProfileEntry ::= SEQUENCE {
+    prvtEventPropagationProfileName         OCTET STRING,
+    prvtEventPropagationProfileRowStatus    RowStatus,
+    prvtEventPropagationSourceRemMep        Unsigned32,
+    prvtEventPropagationSourceLocalMep      Unsigned32,
+    prvtEventPropagationSourceVrrpGroup     Unsigned32,
+    prvtEventPropagationEvent               INTEGER,
+    prvtEventPropagationAction              INTEGER,
+    prvtEventPropagationReverse             INTEGER,
+    prvtEventPropagationThreshold           Unsigned32,
+    prvtEventPropagationTimerWaitToRestore  Unsigned32,
+    prvtEventPropagationTimerHoldOff        Unsigned32,
+    prvtEventPropagationPerformMacFlush     TruthValue
+}
+
+prvtEventPropagationProfileName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This is a unique identifier of the
+         Event Propagation profile tabel."
+    ::= { prvtEventPropagationProfileEntry 1 }
+
+prvtEventPropagationProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Creation/delete/edit of the Event Propagation profile. "
+    ::= { prvtEventPropagationProfileEntry 2 }
+
+prvtEventPropagationSourceRemMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Event received from remote MEP"
+    ::= { prvtEventPropagationProfileEntry 3 }
+
+prvtEventPropagationSourceLocalMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Event received from local MEP"
+    ::= { prvtEventPropagationProfileEntry 4 }
+
+prvtEventPropagationSourceVrrpGroup OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Event received from VRRP"
+    ::= { prvtEventPropagationProfileEntry 5 }
+
+prvtEventPropagationEvent OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), statusDown(1), conLost(2), aisLck(4), 
+                    rcvdTcBpdu(5), vrrpStatusBackup(6) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This leaf defines the type of event that will be monitored."
+    ::= { prvtEventPropagationProfileEntry 6 }
+
+prvtEventPropagationAction OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), linkDrop(1), macWithdraw(2), 
+                    lacpStandby(3), restrictForwarding(4), 
+                    noRestrictForwarding(5) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Defines the action to be take in case of an event. "
+    ::= { prvtEventPropagationProfileEntry 7 }
+
+prvtEventPropagationReverse OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), linkRestore(1), lacpActive(2), 
+                    restrictForwarding(3), noRestrictForwarding(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify reverse action, performed when configured event stops"
+    ::= { prvtEventPropagationProfileEntry 8 }
+
+prvtEventPropagationThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify threshold for specified source port"
+    ::= { prvtEventPropagationProfileEntry 9 }
+
+prvtEventPropagationTimerWaitToRestore OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..600000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify time to wait before configured action is reversed (<0-600000> milliseconds)"
+    ::= { prvtEventPropagationProfileEntry 10 }
+
+prvtEventPropagationTimerHoldOff OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..600000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify time to wait before configured action occurs (<0-600000> milliseconds)"
+    ::= { prvtEventPropagationProfileEntry 11 }
+
+prvtEventPropagationPerformMacFlush OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify whether to perform MAC flush upon receiving of defined event."
+    ::= { prvtEventPropagationProfileEntry 12 }
+
+prvtEventPropagationSourcePortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEventPropagationSourcePortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Sourceport table holds the settings for the
+         Event Propagation"
+    ::= { prvtEventPropagationObjects 2 }
+
+prvtEventPropagationSourcePortEntry OBJECT-TYPE
+    SYNTAX      PrvtEventPropagationSourcePortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "NONE"
+    INDEX       { prvtEventPropagationProfileName, 
+                  prvtEventPropagationSourcePortName }
+    ::= { prvtEventPropagationSourcePortTable 1 }
+
+PrvtEventPropagationSourcePortEntry ::= SEQUENCE {
+    prvtEventPropagationSourcePortName          OCTET STRING,
+    prvtEventPropagationSourcePortRowStatus     RowStatus
+}
+
+prvtEventPropagationSourcePortName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Specify port number (in format UU/SS/PP or AG)"
+    ::= { prvtEventPropagationSourcePortEntry 1 }
+
+prvtEventPropagationSourcePortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Creation/delete/edit of the Event Propagation source port. "
+    ::= { prvtEventPropagationSourcePortEntry 2 }
+
+prvtEventPropagationSessionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtEventPropagationSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtEventPropagationObjects 3 }
+
+prvtEventPropagationSessionEntry OBJECT-TYPE
+    SYNTAX      PrvtEventPropagationSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "NONE"
+    INDEX       { prvtEventPropagationProfileName, 
+                  prvtEventPropagationSessionIndex }
+    ::= { prvtEventPropagationSessionTable 1 }
+
+PrvtEventPropagationSessionEntry ::= SEQUENCE {
+    prvtEventPropagationSessionIndex        Unsigned32,
+    prvtEventPropagationSessionProfileName  OCTET STRING,
+    prvtEventPropagationSessionTarget       INTEGER,
+    prvtEventPropagationSessionId           OCTET STRING,
+    prvtEventPropagationSessionState        INTEGER,
+    prvtEventPropagationSessionActions      Unsigned32,
+    prvtEventPropagationSessionRevertives   Unsigned32
+}
+
+prvtEventPropagationSessionIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Event-propagation session index"
+    ::= { prvtEventPropagationSessionEntry 1 }
+
+prvtEventPropagationSessionProfileName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtEventPropagationSessionEntry 2 }
+
+prvtEventPropagationSessionTarget OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), sap(1), port(2), lag(3), sdp(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtEventPropagationSessionEntry 3 }
+
+prvtEventPropagationSessionId OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtEventPropagationSessionEntry 4 }
+
+prvtEventPropagationSessionState OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), linkDropped(1), linkRestored(2), 
+                    linkActionPend(3), linkRevertivePend(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtEventPropagationSessionEntry 5 }
+
+prvtEventPropagationSessionActions OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtEventPropagationSessionEntry 6 }
+
+prvtEventPropagationSessionRevertives OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtEventPropagationSessionEntry 7 }
+
+epappPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF EpappPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains event propagation profiles enabled on each port."
+    ::= { prvtEventPropagationObjects 4 }
+
+epappPortEntry OBJECT-TYPE
+    SYNTAX      EpappPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Event propagation profile on port."
+    INDEX       { epappPortName }
+    ::= { epappPortTable 1 }
+
+EpappPortEntry ::= SEQUENCE {
+    epappPortName       OCTET STRING,
+    epappPortRowStatus  RowStatus,
+    epappPortProfile    OCTET STRING
+}
+
+epappPortName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Port name."
+    ::= { epappPortEntry 1 }
+
+epappPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Creation/delete/edit of the Event Propagation port. "
+    ::= { epappPortEntry 2 }
+
+epappPortProfile OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify the name of event propagation profile, applied to this port. "
+    ::= { epappPortEntry 3 }
+
+END -- end of module PRVT-EVENT-PROPAGATION-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-HQOS-MIB b/MIBS/telco-systems/binox/PRVT-HQOS-MIB
new file mode 100644
index 0000000..b3a2bdd
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-HQOS-MIB
@@ -0,0 +1,3283 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-HQOS-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-HQOS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    serviceAccessSwitch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+prvtHqosMIB MODULE-IDENTITY
+    LAST-UPDATED "201008260000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The private MIB module to manage Hierarchical Quality of Service."
+    REVISION    "201008260000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { serviceAccessSwitch 5 }
+
+
+PrvtHqosNamedItem ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION 
+        "The name of an item."
+    SYNTAX      OCTET STRING (SIZE(1..6))
+
+PrvtHqosNamedItemOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION 
+        "Same as PrvtHqosNamedItem except that a zero-length string is used
+         to represent that no value is assigned."
+    SYNTAX      OCTET STRING (SIZE(0..6))
+
+PrvtHqosLspExpValueType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "MPLS Experimental bits."
+    SYNTAX      Integer32 (0..7)
+
+PrvtHqosDot1pPriority ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "IEEE 802.1p priority. Zero is lowest, seven is highest."
+    SYNTAX      Integer32 (0..7)
+
+PrvtHqosFcType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The name of a Forwarding Class."
+    SYNTAX      INTEGER { be(1), l2(2), af(3), l1(4), h2(5), ef(6), 
+                    h1(7), nc(8) }
+
+PrvtHqosDscpValue ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The value of a Differential Services Code Point."
+    SYNTAX      Integer32 (0..63)
+
+PrvtHqosDescrType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION 
+        "The description for an item."
+    SYNTAX      OCTET STRING (SIZE(0..30))
+
+PrvtHqosServiceQueueId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identification number of a service queue."
+    SYNTAX      Integer32 (1..24)
+
+PrvtHqosNetQueueIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identification number of a network queue."
+    SYNTAX      Integer32 (1..24)
+
+PrvtHqosServicePolicyId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identification number of a service policy."
+    SYNTAX      Unsigned32 (1..64)
+
+PrvtHqosNetPolNameType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION 
+        "The identification string of a network policy."
+    SYNTAX      OCTET STRING (SIZE(1..6))
+
+PrvtHqosNetPolNameOrNoneType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION 
+        "Same as PrvtHqosNetPolNameType except that a zero
+         length string is used to represent no network policy."
+    SYNTAX      OCTET STRING (SIZE(0..6))
+
+PrvtHqosRateValueL1 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Rate in kbps."
+    SYNTAX      Integer32 (80..5242875)
+
+PrvtHqosRateValueL2 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Rate in kbps."
+    SYNTAX      Integer32 (16..1048575)
+
+PrvtHqosRateValueNet ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Rate in kbps."
+    SYNTAX      Integer32 (160..1048575)
+
+PrvtHqosBurstValueL1 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Burst size in kilobytes."
+    SYNTAX      Integer32 (16..65535)
+
+PrvtHqosBurstValueL2 ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Burst size in kilobytes."
+    SYNTAX      Integer32 (16..16383)
+
+PrvtHqosBurstValueNet ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Burst size in kilobytesRate."
+    SYNTAX      Integer32 (1..16383)
+
+PrvtHqosBurstValueIntf ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Burst size in kilobytes."
+    SYNTAX      Integer32 (1..32767)
+
+PrvtHqosWredMinValue ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Minimum WRED limit."
+    SYNTAX      Integer32 (0..32768)
+
+PrvtHqosWredMaxValue ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Maximum WRED limit."
+    SYNTAX      Integer32 (8..32768)
+
+PrvtHqosWredProbValue ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "WRED probability."
+    SYNTAX      Integer32 (0..100)
+
+PrvtHqosLevel ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The priority level to apply to a packet."
+    SYNTAX      INTEGER { low(1), high(2) }
+
+PrvtHqosWeight ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The weight of the specified entity while feeding into the parent."
+    SYNTAX      Integer32 (1..220)
+
+PrvtHqosColorType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The traffic conformance level (i.e. traffic color)."
+    SYNTAX      INTEGER { green(1), yellow(2) }
+
+PrvtHqosIfShaperId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of an Interface Shaper Profile."
+    SYNTAX      Integer32 (1..2)
+
+PrvtHqosIfShaperIdOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Same as PrvtHqosIfShaperId except that the value of zero represents
+         no shaper profile."
+    SYNTAX      Integer32 (0..2)
+
+PrvtHqosL1ShaperId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of a L1 Scheduler Shaper Profile."
+    SYNTAX      Integer32 (1..16)
+
+PrvtHqosNetShaperId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of a Network Shaper Profile."
+    SYNTAX      Integer32 (17..64)
+
+PrvtHqosL2ShaperId ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of a L2 Scheduler Shaper Profile."
+    SYNTAX      Integer32 (1..255)
+
+PrvtHqosPolicerIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of a Policer Profile."
+    SYNTAX      Integer32 (1..256)
+
+PrvtHqosQueueType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The type of queue."
+    SYNTAX      INTEGER { unicast(1), broadcast(2), multicast(3) }
+
+PrvtHqosServWfqIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of a Service WFQ Profile."
+    SYNTAX      Integer32 (1..64)
+
+PrvtHqosServSchedWfqIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of a Service Scheduler WFQ Profile."
+    SYNTAX      Integer32 (1..63)
+
+PrvtHqosNetWfqIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of a Network WFQ Profile."
+    SYNTAX      Integer32 (1..16)
+
+PrvtHqosWredIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identifier of a WRED Profile."
+    SYNTAX      Integer32 (1..32)
+
+PrvtHqosMapType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The type of mapping - VPT or DSCP."
+    SYNTAX      INTEGER { vpt(1), dscp(2) }
+
+PrvtHqosStatsCountType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION 
+        "The value of a statistics counter.
+         The value is represented as an ASCII string."
+    SYNTAX      OCTET STRING
+
+hqosMIBObjects OBJECT IDENTIFIER
+    ::= { prvtHqosMIB 1 }
+
+svcIngObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 1 }
+
+prvtHqosSvcIngTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcIngEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy Table
+         Each entry in this table defines a service ingress policy.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in the following tables:
+         - prvtHqosSvcIngQueueTable
+         - prvtHqosSvcIngFcTable
+         - prvtHqosSvcIngFcDscpTable
+         - prvtHqosSvcIngFcDot1pTable
+         - prvtHqosSvcIngFcDefaultTable
+         - prvtHqosSvcIngFcQueueTable"
+    ::= { svcIngObjects 1 }
+
+prvtHqosSvcIngEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcIngEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcIngTable."
+    INDEX       { prvtHqosSvcIngId }
+    ::= { prvtHqosSvcIngTable 1 }
+
+PrvtHqosSvcIngEntry ::= SEQUENCE {
+    prvtHqosSvcIngId            PrvtHqosServicePolicyId,
+    prvtHqosSvcIngRowStatus     RowStatus,
+    prvtHqosSvcIngDescr         PrvtHqosDescrType
+}
+
+prvtHqosSvcIngId OBJECT-TYPE
+    SYNTAX      PrvtHqosServicePolicyId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a service ingress policy."
+    ::= { prvtHqosSvcIngEntry 1 }
+
+prvtHqosSvcIngRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this service ingress policy."
+    ::= { prvtHqosSvcIngEntry 2 }
+
+prvtHqosSvcIngDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the service ingress policy."
+    ::= { prvtHqosSvcIngEntry 3 }
+
+prvtHqosSvcIngQueueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcIngQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy Queue Table
+         Entries in this table define queues belonging to service ingress policies.
+         A queue is specified using a unique queue identifier (prvtHqosSvcIngQueueId),
+         and its parent scheduler policy name (prvtHqosSchedIngPolicyName) and
+         scheduler name (prvtHqosSchedIngVirtName)."
+    ::= { svcIngObjects 2 }
+
+prvtHqosSvcIngQueueEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcIngQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcIngQueueTable."
+    INDEX       { prvtHqosSvcIngId, prvtHqosSvcIngQueueId, 
+                  prvtHqosSchedIngPolicyName, prvtHqosSchedIngVirtName }
+    ::= { prvtHqosSvcIngQueueTable 1 }
+
+PrvtHqosSvcIngQueueEntry ::= SEQUENCE {
+    prvtHqosSvcIngQueueId           PrvtHqosServiceQueueId,
+    prvtHqosSvcIngQueueRowStatus    RowStatus,
+    prvtHqosSvcIngQueueServWfq      PrvtHqosServWfqIdType,
+    prvtHqosSvcIngQueueWred         PrvtHqosWredIdType,
+    prvtHqosSvcIngQueuePolicer      PrvtHqosPolicerIdType
+}
+
+prvtHqosSvcIngQueueId OBJECT-TYPE
+    SYNTAX      PrvtHqosServiceQueueId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a queue belonging to a service ingress policy."
+    ::= { prvtHqosSvcIngQueueEntry 1 }
+
+prvtHqosSvcIngQueueRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this service ingress policy queue."
+    ::= { prvtHqosSvcIngQueueEntry 2 }
+
+prvtHqosSvcIngQueueServWfq OBJECT-TYPE
+    SYNTAX      PrvtHqosServWfqIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WFQ profile that needs to be used by the scheduler to which the queue would be feeding to.
+         Must be set to the prvtHqosWfqSvcIngPrfId of an entry existing in prvtHqosWfqSvcIngPrfTable."
+    ::= { prvtHqosSvcIngQueueEntry 3 }
+
+prvtHqosSvcIngQueueWred OBJECT-TYPE
+    SYNTAX      PrvtHqosWredIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WRED profile applied to this service ingress policy queue.
+         Must be set to the prvtHqosWredPrfId of an entry existing in prvtHqosWredPrfTable."
+    ::= { prvtHqosSvcIngQueueEntry 4 }
+
+prvtHqosSvcIngQueuePolicer OBJECT-TYPE
+    SYNTAX      PrvtHqosPolicerIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The policer profile applied to this service ingress policy queue.
+         Must be set to the prvtHqosPolicerSvcPrfId of an entry existing in prvtHqosPolicerSvcPrfTable."
+    ::= { prvtHqosSvcIngQueueEntry 5 }
+
+prvtHqosSvcIngFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcIngFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy FC Table
+         A list of forwarding classes belonging to service ingress policies.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in the following tables:
+         - prvtHqosSvcIngFcDscpTable
+         - prvtHqosSvcIngFcDot1pTable
+         - prvtHqosSvcIngFcDefaultTable
+         - prvtHqosSvcIngFcQueueTable"
+    ::= { svcIngObjects 3 }
+
+prvtHqosSvcIngFcEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcIngFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcIngFcTable."
+    INDEX       { prvtHqosSvcIngId, prvtHqosSvcIngFcType }
+    ::= { prvtHqosSvcIngFcTable 1 }
+
+PrvtHqosSvcIngFcEntry ::= SEQUENCE {
+    prvtHqosSvcIngFcType        PrvtHqosFcType,
+    prvtHqosSvcIngFcRowStatus   RowStatus
+}
+
+prvtHqosSvcIngFcType OBJECT-TYPE
+    SYNTAX      PrvtHqosFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The forwarding class to which this row applies."
+    ::= { prvtHqosSvcIngFcEntry 1 }
+
+prvtHqosSvcIngFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this forwarding class."
+    ::= { prvtHqosSvcIngFcEntry 2 }
+
+prvtHqosSvcIngFcDscpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcIngFcDscpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy FC DSCP Mapping Table
+         Each entry in this table defines a DSCP to forwarding class mapping.
+         Note that DSCP to FC mappings can not be used together with
+         Dot1p (VPT) to FC mappings."
+    ::= { svcIngObjects 4 }
+
+prvtHqosSvcIngFcDscpEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcIngFcDscpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcIngFcDscpTable."
+    INDEX       { prvtHqosSvcIngId, prvtHqosSvcIngFcType, 
+                  prvtHqosSvcIngFcDscpValue }
+    ::= { prvtHqosSvcIngFcDscpTable 1 }
+
+PrvtHqosSvcIngFcDscpEntry ::= SEQUENCE {
+    prvtHqosSvcIngFcDscpValue       PrvtHqosDscpValue,
+    prvtHqosSvcIngFcDscpRowStatus   RowStatus,
+    prvtHqosSvcIngFcDscpColor       PrvtHqosColorType
+}
+
+prvtHqosSvcIngFcDscpValue OBJECT-TYPE
+    SYNTAX      PrvtHqosDscpValue
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Differentiated Services Code Point value to match in the packet."
+    ::= { prvtHqosSvcIngFcDscpEntry 1 }
+
+prvtHqosSvcIngFcDscpRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this DSCP value."
+    ::= { prvtHqosSvcIngFcDscpEntry 2 }
+
+prvtHqosSvcIngFcDscpColor OBJECT-TYPE
+    SYNTAX      PrvtHqosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color (conformance level) to apply to traffic matching this
+         row's DSCP value."
+    ::= { prvtHqosSvcIngFcDscpEntry 3 }
+
+prvtHqosSvcIngFcDot1pTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcIngFcDot1pEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy FC Dot1p Mapping Table
+         Each entry in this table defines a Dot1p (VPT) to forwarding class mapping.
+         Note that VPT to FC mappings can not be used together with
+         DSCP to FC mappings."
+    ::= { svcIngObjects 5 }
+
+prvtHqosSvcIngFcDot1pEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcIngFcDot1pEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcIngFcDot1pTable."
+    INDEX       { prvtHqosSvcIngId, prvtHqosSvcIngFcType, 
+                  prvtHqosSvcIngFcDot1pValue }
+    ::= { prvtHqosSvcIngFcDot1pTable 1 }
+
+PrvtHqosSvcIngFcDot1pEntry ::= SEQUENCE {
+    prvtHqosSvcIngFcDot1pValue      PrvtHqosDot1pPriority,
+    prvtHqosSvcIngFcDot1pRowStatus  RowStatus,
+    prvtHqosSvcIngFcDot1pColor      PrvtHqosColorType
+}
+
+prvtHqosSvcIngFcDot1pValue OBJECT-TYPE
+    SYNTAX      PrvtHqosDot1pPriority
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Dot1p (VPT) value to match in the packet."
+    ::= { prvtHqosSvcIngFcDot1pEntry 1 }
+
+prvtHqosSvcIngFcDot1pRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this service ingress policy's Dot1p entry."
+    ::= { prvtHqosSvcIngFcDot1pEntry 2 }
+
+prvtHqosSvcIngFcDot1pColor OBJECT-TYPE
+    SYNTAX      PrvtHqosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color (conformance level) to apply to traffic matching this
+         forwarding-class's Dot1p value."
+    ::= { prvtHqosSvcIngFcDot1pEntry 3 }
+
+prvtHqosSvcIngFcDefaultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcIngFcDefaultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy FC Default Mapping Table
+         This table is used to configure, for each forwarding class, the default settings for
+         all VPT or DSCP values.
+         Only one entry may be created for each service policy's forwarding class (i.e. per
+         prvtHqosSvcIngId, prvtHqosSvcIngFcType combination)."
+    ::= { svcIngObjects 6 }
+
+prvtHqosSvcIngFcDefaultEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcIngFcDefaultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcIngFcDefaultTable."
+    INDEX       { prvtHqosSvcIngId, prvtHqosSvcIngFcType, 
+                  prvtHqosSvcIngFcDefaultMapType }
+    ::= { prvtHqosSvcIngFcDefaultTable 1 }
+
+PrvtHqosSvcIngFcDefaultEntry ::= SEQUENCE {
+    prvtHqosSvcIngFcDefaultMapType      PrvtHqosMapType,
+    prvtHqosSvcIngFcDefaultRowStatus    RowStatus,
+    prvtHqosSvcIngFcDefaultColor        PrvtHqosColorType
+}
+
+prvtHqosSvcIngFcDefaultMapType OBJECT-TYPE
+    SYNTAX      PrvtHqosMapType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The mapping type (DSCP, or VPT) to which this row applies."
+    ::= { prvtHqosSvcIngFcDefaultEntry 1 }
+
+prvtHqosSvcIngFcDefaultRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this mapping type."
+    ::= { prvtHqosSvcIngFcDefaultEntry 2 }
+
+prvtHqosSvcIngFcDefaultColor OBJECT-TYPE
+    SYNTAX      PrvtHqosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The default color (conformance level) to apply for all values (DSCP/VPT)
+         applicable for the mapping type."
+    ::= { prvtHqosSvcIngFcDefaultEntry 3 }
+
+prvtHqosSvcIngFcQueueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcIngFcQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy FC Queue Table
+         This table maintains, for service ingress policies, the mapping of
+         a particular forwarding class traffic type into a specified queue.
+         A queue is specified using a unique queue identifier
+         (prvtHqosSvcIngQueueId), and its parent scheduler policy
+         name (prvtHqosSchedIngPolicyName) and scheduler name
+         (prvtHqosSchedIngVirtName)."
+    ::= { svcIngObjects 7 }
+
+prvtHqosSvcIngFcQueueEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcIngFcQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcIngFcQueueTable."
+    INDEX       { prvtHqosSvcIngId, prvtHqosSvcIngFcType, 
+                  prvtHqosSvcIngFcQueueType, prvtHqosSvcIngQueueId, 
+                  prvtHqosSchedIngPolicyName, prvtHqosSchedIngVirtName }
+    ::= { prvtHqosSvcIngFcQueueTable 1 }
+
+PrvtHqosSvcIngFcQueueEntry ::= SEQUENCE {
+    prvtHqosSvcIngFcQueueType       PrvtHqosQueueType,
+    prvtHqosSvcIngFcQueueRowStatus  RowStatus
+}
+
+prvtHqosSvcIngFcQueueType OBJECT-TYPE
+    SYNTAX      PrvtHqosQueueType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type (unicast/multicast/broadcast) of the queue to which this row applies."
+    ::= { prvtHqosSvcIngFcQueueEntry 1 }
+
+prvtHqosSvcIngFcQueueRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this forwarding class queue."
+    ::= { prvtHqosSvcIngFcQueueEntry 2 }
+
+prvtHqosSvcIngQStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcIngQStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Queue Statistics Table
+         Entries in this table contain the per-port statistics for
+         service ingress queues."
+    ::= { svcIngObjects 8 }
+
+prvtHqosSvcIngQStatsEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcIngQStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcIngQStatsTable."
+    INDEX       { prvtHqosSvcIngId, prvtHqosSvcIngQueueId, 
+                  prvtHqosSchedIngPolicyName, prvtHqosSchedIngVirtName, 
+                  ifIndex }
+    ::= { prvtHqosSvcIngQStatsTable 1 }
+
+PrvtHqosSvcIngQStatsEntry ::= SEQUENCE {
+    prvtHqosSvcIngQStatsGrnBytes        PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsGrnPckts        PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsYlwBytes        PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsYlwPckts        PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsTxBytes         PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsTxPckts         PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsWredGrnBytes    PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsWredGrnPckts    PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsWredYlwBytes    PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsWredYlwPckts    PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsPolDropBytes    PrvtHqosStatsCountType,
+    prvtHqosSvcIngQStatsPolDropPckts    PrvtHqosStatsCountType
+}
+
+prvtHqosSvcIngQStatsGrnBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of green traffic."
+    ::= { prvtHqosSvcIngQStatsEntry 2 }
+
+prvtHqosSvcIngQStatsGrnPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of green traffic."
+    ::= { prvtHqosSvcIngQStatsEntry 3 }
+
+prvtHqosSvcIngQStatsYlwBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of yellow traffic."
+    ::= { prvtHqosSvcIngQStatsEntry 4 }
+
+prvtHqosSvcIngQStatsYlwPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of yellow traffic."
+    ::= { prvtHqosSvcIngQStatsEntry 5 }
+
+prvtHqosSvcIngQStatsTxBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of traffic transmitted."
+    ::= { prvtHqosSvcIngQStatsEntry 6 }
+
+prvtHqosSvcIngQStatsTxPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of traffic transmitted."
+    ::= { prvtHqosSvcIngQStatsEntry 7 }
+
+prvtHqosSvcIngQStatsWredGrnBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of green traffic dropped due to the WRED."
+    ::= { prvtHqosSvcIngQStatsEntry 8 }
+
+prvtHqosSvcIngQStatsWredGrnPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of green traffic dropped due to the WRED."
+    ::= { prvtHqosSvcIngQStatsEntry 9 }
+
+prvtHqosSvcIngQStatsWredYlwBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of yellow traffic dropped due to the WRED."
+    ::= { prvtHqosSvcIngQStatsEntry 10 }
+
+prvtHqosSvcIngQStatsWredYlwPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of yellow traffic dropped due to the WRED."
+    ::= { prvtHqosSvcIngQStatsEntry 11 }
+
+prvtHqosSvcIngQStatsPolDropBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of traffic dropped due to the policer."
+    ::= { prvtHqosSvcIngQStatsEntry 12 }
+
+prvtHqosSvcIngQStatsPolDropPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of traffic dropped due to the policer."
+    ::= { prvtHqosSvcIngQStatsEntry 13 }
+
+svcEgrObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 2 }
+
+prvtHqosSvcEgrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcEgrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Egress Policy Table
+         Each entry in this table defines a service egress policy.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in the following tables:
+         - prvtHqosSvcEgrQueueTable
+         - prvtHqosSvcEgrFcTable
+         - prvtHqosSvcEgrFcQueueTable"
+    ::= { svcEgrObjects 1 }
+
+prvtHqosSvcEgrEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcEgrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcEgrTable."
+    INDEX       { prvtHqosSvcEgrId }
+    ::= { prvtHqosSvcEgrTable 1 }
+
+PrvtHqosSvcEgrEntry ::= SEQUENCE {
+    prvtHqosSvcEgrId            PrvtHqosServicePolicyId,
+    prvtHqosSvcEgrRowStatus     RowStatus,
+    prvtHqosSvcEgrDescr         PrvtHqosDescrType
+}
+
+prvtHqosSvcEgrId OBJECT-TYPE
+    SYNTAX      PrvtHqosServicePolicyId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a service egress policy."
+    ::= { prvtHqosSvcEgrEntry 1 }
+
+prvtHqosSvcEgrRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this service egress policy."
+    ::= { prvtHqosSvcEgrEntry 2 }
+
+prvtHqosSvcEgrDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the service egress policy."
+    ::= { prvtHqosSvcEgrEntry 3 }
+
+prvtHqosSvcEgrQueueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcEgrQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Egress Policy Queue Table
+         Entries in this table define queues belonging to service egress policies.
+         A queue is specified using a unique queue identifier (prvtHqosSvcEgrQueueId),
+         and its parent scheduler policy name (prvtHqosSchedEgrPolicyName) and
+         scheduler name (prvtHqosSchedEgrVirtName)."
+    ::= { svcEgrObjects 2 }
+
+prvtHqosSvcEgrQueueEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcEgrQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcEgrQueueTable."
+    INDEX       { prvtHqosSvcEgrId, prvtHqosSvcEgrQueueId, 
+                  prvtHqosSchedEgrPolicyName, prvtHqosSchedEgrVirtName }
+    ::= { prvtHqosSvcEgrQueueTable 1 }
+
+PrvtHqosSvcEgrQueueEntry ::= SEQUENCE {
+    prvtHqosSvcEgrQueueId           PrvtHqosServiceQueueId,
+    prvtHqosSvcEgrQueueRowStatus    RowStatus,
+    prvtHqosSvcEgrQueueServWfq      PrvtHqosServWfqIdType,
+    prvtHqosSvcEgrQueueWred         PrvtHqosWredIdType
+}
+
+prvtHqosSvcEgrQueueId OBJECT-TYPE
+    SYNTAX      PrvtHqosServiceQueueId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a queue belonging to a service egress policy."
+    ::= { prvtHqosSvcEgrQueueEntry 1 }
+
+prvtHqosSvcEgrQueueRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this service egress policy queue."
+    ::= { prvtHqosSvcEgrQueueEntry 2 }
+
+prvtHqosSvcEgrQueueServWfq OBJECT-TYPE
+    SYNTAX      PrvtHqosServWfqIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WFQ profile that needs to be used by the scheduler to which the queue would be feeding to.
+         Must be set to the prvtHqosWfqSvcEgrPrfId of an entry existing in prvtHqosWfqSvcEgrPrfTable."
+    ::= { prvtHqosSvcEgrQueueEntry 3 }
+
+prvtHqosSvcEgrQueueWred OBJECT-TYPE
+    SYNTAX      PrvtHqosWredIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WRED profile applied to this service egress policy queue.
+         Must be set to the prvtHqosWredPrfId of an entry existing in prvtHqosWredPrfTable."
+    ::= { prvtHqosSvcEgrQueueEntry 4 }
+
+prvtHqosSvcEgrFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcEgrFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Egress Policy FC Mapping Table
+         This table allows configuration that is specific to a forwarding class.
+         Before a row for a specific forwarding class may be created in
+         prvtHqosSvcEgrFcQueueTable, or in prvtHqosSvcEgrFcColorTable, a row with
+         that forwarding class must first be created in this table.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in prvtHqosSvcEgrFcQueueTable, and
+         prvtHqosSvcEgrFcColorTable."
+    ::= { svcEgrObjects 3 }
+
+prvtHqosSvcEgrFcEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcEgrFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcEgrFcTable."
+    INDEX       { prvtHqosSvcEgrId, prvtHqosSvcEgrFcNumber }
+    ::= { prvtHqosSvcEgrFcTable 1 }
+
+PrvtHqosSvcEgrFcEntry ::= SEQUENCE {
+    prvtHqosSvcEgrFcNumber      PrvtHqosFcType,
+    prvtHqosSvcEgrFcRowStatus   RowStatus
+}
+
+prvtHqosSvcEgrFcNumber OBJECT-TYPE
+    SYNTAX      PrvtHqosFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The forwarding class to which this row applies."
+    ::= { prvtHqosSvcEgrFcEntry 1 }
+
+prvtHqosSvcEgrFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this forwarding class."
+    ::= { prvtHqosSvcEgrFcEntry 3 }
+
+prvtHqosSvcEgrFcQueueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcEgrFcQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Egress Policy FC Queue Table
+         This table maintains, for service egress policies, the mapping of
+         traffic forwarding class into a specified queue.
+         A queue is specified using a unique queue identifier
+         (prvtHqosSvcEgrQueueId), and its parent scheduler policy
+         name (prvtHqosSchedEgrPolicyName) and scheduler name
+         (prvtHqosSchedEgrVirtName)."
+    ::= { svcEgrObjects 4 }
+
+prvtHqosSvcEgrFcQueueEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcEgrFcQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcEgrFcQueueTable."
+    INDEX       { prvtHqosSvcEgrId, prvtHqosSvcEgrFcNumber, 
+                  prvtHqosSvcEgrFcQueueType, prvtHqosSvcEgrQueueId, 
+                  prvtHqosSchedEgrPolicyName, prvtHqosSchedEgrVirtName }
+    ::= { prvtHqosSvcEgrFcQueueTable 1 }
+
+PrvtHqosSvcEgrFcQueueEntry ::= SEQUENCE {
+    prvtHqosSvcEgrFcQueueType       PrvtHqosQueueType,
+    prvtHqosSvcEgrFcQueueRowStatus  RowStatus
+}
+
+prvtHqosSvcEgrFcQueueType OBJECT-TYPE
+    SYNTAX      PrvtHqosQueueType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type (unicast/multicast/broadcast) of the queue to which this row applies."
+    ::= { prvtHqosSvcEgrFcQueueEntry 1 }
+
+prvtHqosSvcEgrFcQueueRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this queue."
+    ::= { prvtHqosSvcEgrFcQueueEntry 2 }
+
+prvtHqosSvcEgrFcColorTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcEgrFcColorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Egress Policy FC Color Table
+         This table allows remarking of VPT bits based on forwarding class and color."
+    ::= { svcEgrObjects 5 }
+
+prvtHqosSvcEgrFcColorEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcEgrFcColorEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcEgrFcColorTable."
+    INDEX       { prvtHqosSvcEgrId, prvtHqosSvcEgrFcNumber, 
+                  prvtHqosSvcEgrFcColorValue }
+    ::= { prvtHqosSvcEgrFcColorTable 1 }
+
+PrvtHqosSvcEgrFcColorEntry ::= SEQUENCE {
+    prvtHqosSvcEgrFcColorValue          PrvtHqosColorType,
+    prvtHqosSvcEgrFcColorRowStatus      RowStatus,
+    prvtHqosSvcEgrFcColorDot1PValue     PrvtHqosDot1pPriority
+}
+
+prvtHqosSvcEgrFcColorValue OBJECT-TYPE
+    SYNTAX      PrvtHqosColorType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The traffic color (conformance level) to which this row applies."
+    ::= { prvtHqosSvcEgrFcColorEntry 2 }
+
+prvtHqosSvcEgrFcColorRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this forwarding class and color."
+    ::= { prvtHqosSvcEgrFcColorEntry 3 }
+
+prvtHqosSvcEgrFcColorDot1PValue OBJECT-TYPE
+    SYNTAX      PrvtHqosDot1pPriority
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The 802.1p value to use for packet remarking for traffic belonging
+         to this forwarding class and color."
+    ::= { prvtHqosSvcEgrFcColorEntry 4 }
+
+prvtHqosSvcEgrQStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSvcEgrQStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Egress Queue Statistics Table
+         Entries in this table contain the per-port statistics for
+         service egress queues."
+    ::= { svcEgrObjects 6 }
+
+prvtHqosSvcEgrQStatsEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSvcEgrQStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSvcEgrQStatsTable."
+    INDEX       { prvtHqosSvcEgrId, prvtHqosSvcEgrQueueId, 
+                  prvtHqosSchedEgrPolicyName, prvtHqosSchedEgrVirtName, 
+                  ifIndex }
+    ::= { prvtHqosSvcEgrQStatsTable 1 }
+
+PrvtHqosSvcEgrQStatsEntry ::= SEQUENCE {
+    prvtHqosSvcEgrQStatsGrnBytes        PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsGrnPckts        PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsYlwBytes        PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsYlwPckts        PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsTxBytes         PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsTxPckts         PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsWredGrnBytes    PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsWredGrnPckts    PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsWredYlwBytes    PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsWredYlwPckts    PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsPolDropBytes    PrvtHqosStatsCountType,
+    prvtHqosSvcEgrQStatsPolDropPckts    PrvtHqosStatsCountType
+}
+
+prvtHqosSvcEgrQStatsGrnBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of green traffic."
+    ::= { prvtHqosSvcEgrQStatsEntry 2 }
+
+prvtHqosSvcEgrQStatsGrnPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of green traffic."
+    ::= { prvtHqosSvcEgrQStatsEntry 3 }
+
+prvtHqosSvcEgrQStatsYlwBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of yellow traffic."
+    ::= { prvtHqosSvcEgrQStatsEntry 4 }
+
+prvtHqosSvcEgrQStatsYlwPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of yellow traffic."
+    ::= { prvtHqosSvcEgrQStatsEntry 5 }
+
+prvtHqosSvcEgrQStatsTxBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of traffic transmitted."
+    ::= { prvtHqosSvcEgrQStatsEntry 6 }
+
+prvtHqosSvcEgrQStatsTxPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of traffic transmitted."
+    ::= { prvtHqosSvcEgrQStatsEntry 7 }
+
+prvtHqosSvcEgrQStatsWredGrnBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of green traffic dropped due to the WRED."
+    ::= { prvtHqosSvcEgrQStatsEntry 8 }
+
+prvtHqosSvcEgrQStatsWredGrnPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of green traffic dropped due to the WRED."
+    ::= { prvtHqosSvcEgrQStatsEntry 9 }
+
+prvtHqosSvcEgrQStatsWredYlwBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of yellow traffic dropped due to the WRED."
+    ::= { prvtHqosSvcEgrQStatsEntry 10 }
+
+prvtHqosSvcEgrQStatsWredYlwPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of yellow traffic dropped due to the WRED."
+    ::= { prvtHqosSvcEgrQStatsEntry 11 }
+
+prvtHqosSvcEgrQStatsPolDropBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of traffic dropped due to the policer."
+    ::= { prvtHqosSvcEgrQStatsEntry 12 }
+
+prvtHqosSvcEgrQStatsPolDropPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of traffic dropped due to the policer."
+    ::= { prvtHqosSvcEgrQStatsEntry 13 }
+
+netObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 3 }
+
+prvtHqosNetPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosNetPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Policy Table
+         Each entry in this table defines a network (ingress or egress) policy.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in the following tables:
+         - prvtHqosNetIngLspExpTable
+         - prvtHqosNetEgrFcTable"
+    ::= { netObjects 1 }
+
+prvtHqosNetPolicyEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosNetPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosNetPolicyTable."
+    INDEX       { prvtHqosNetPolicyName }
+    ::= { prvtHqosNetPolicyTable 1 }
+
+PrvtHqosNetPolicyEntry ::= SEQUENCE {
+    prvtHqosNetPolicyName       PrvtHqosNetPolNameType,
+    prvtHqosNetPolicyRowStatus  RowStatus,
+    prvtHqosNetPolicyDescr      PrvtHqosDescrType
+}
+
+prvtHqosNetPolicyName OBJECT-TYPE
+    SYNTAX      PrvtHqosNetPolNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a network policy."
+    ::= { prvtHqosNetPolicyEntry 1 }
+
+prvtHqosNetPolicyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this network policy."
+    ::= { prvtHqosNetPolicyEntry 2 }
+
+prvtHqosNetPolicyDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the network policy"
+    ::= { prvtHqosNetPolicyEntry 3 }
+
+prvtHqosNetIngLspExpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosNetIngLspExpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Ingress Policy LSP EXP Mapping Table
+         This table contains network ingress policies' LSP EXP bits to
+         forwarding class and color mappings."
+    ::= { netObjects 2 }
+
+prvtHqosNetIngLspExpEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosNetIngLspExpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosNetIngLspExpTable."
+    INDEX       { prvtHqosNetPolicyName, prvtHqosNetIngLspExpValue }
+    ::= { prvtHqosNetIngLspExpTable 1 }
+
+PrvtHqosNetIngLspExpEntry ::= SEQUENCE {
+    prvtHqosNetIngLspExpValue       PrvtHqosLspExpValueType,
+    prvtHqosNetIngLspExpRowStatus   RowStatus,
+    prvtHqosNetIngLspExpFC          PrvtHqosFcType,
+    prvtHqosNetIngLspExpColor       PrvtHqosColorType
+}
+
+prvtHqosNetIngLspExpValue OBJECT-TYPE
+    SYNTAX      PrvtHqosLspExpValueType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The LSP EXP bit value to which this row applies."
+    ::= { prvtHqosNetIngLspExpEntry 1 }
+
+prvtHqosNetIngLspExpRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this LSP EXP bit value."
+    ::= { prvtHqosNetIngLspExpEntry 2 }
+
+prvtHqosNetIngLspExpFC OBJECT-TYPE
+    SYNTAX      PrvtHqosFcType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The forwarding class to assign to traffic matching the LSP EXP bit value."
+    ::= { prvtHqosNetIngLspExpEntry 3 }
+
+prvtHqosNetIngLspExpColor OBJECT-TYPE
+    SYNTAX      PrvtHqosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color (conformance level) to assign to traffic matching the LSP EXP bit value."
+    ::= { prvtHqosNetIngLspExpEntry 4 }
+
+prvtHqosNetEgrFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosNetEgrFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Egress FC Mapping Table
+         This table allows remarking of LSP EXP bits based on forwarding class and color."
+    ::= { netObjects 3 }
+
+prvtHqosNetEgrFcEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosNetEgrFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosNetEgrFcTable."
+    INDEX       { prvtHqosNetPolicyName, prvtHqosNetEgrFcNumber, 
+                  prvtHqosNetEgrFcColor }
+    ::= { prvtHqosNetEgrFcTable 1 }
+
+PrvtHqosNetEgrFcEntry ::= SEQUENCE {
+    prvtHqosNetEgrFcNumber          PrvtHqosFcType,
+    prvtHqosNetEgrFcColor           PrvtHqosColorType,
+    prvtHqosNetEgrFcRowStatus       RowStatus,
+    prvtHqosNetEgrFcLspExpValue     PrvtHqosLspExpValueType
+}
+
+prvtHqosNetEgrFcNumber OBJECT-TYPE
+    SYNTAX      PrvtHqosFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The forwarding class to which this row applies."
+    ::= { prvtHqosNetEgrFcEntry 1 }
+
+prvtHqosNetEgrFcColor OBJECT-TYPE
+    SYNTAX      PrvtHqosColorType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The traffic color (conformance level) to which this row applies."
+    ::= { prvtHqosNetEgrFcEntry 2 }
+
+prvtHqosNetEgrFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this forwarding class and color."
+    ::= { prvtHqosNetEgrFcEntry 3 }
+
+prvtHqosNetEgrFcLspExpValue OBJECT-TYPE
+    SYNTAX      PrvtHqosLspExpValueType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The value to assign to the LSP EXP bits of traffic belonging to the forwarding class and color."
+    ::= { prvtHqosNetEgrFcEntry 4 }
+
+netQueueObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 4 }
+
+prvtHqosNetQPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosNetQPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Egress Queue Policy Table
+         Each entry in this table defines a network egress queue policy.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in the following tables:
+         - prvtHqosNetQPolicyQueueTable
+         - prvtHqosNetQPolicyFcTable
+         - prvtHqosNetQPolicyFcQueueTable"
+    ::= { netQueueObjects 1 }
+
+prvtHqosNetQPolicyEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosNetQPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosNetQPolicyTable."
+    INDEX       { prvtHqosNetQPolicyName }
+    ::= { prvtHqosNetQPolicyTable 1 }
+
+PrvtHqosNetQPolicyEntry ::= SEQUENCE {
+    prvtHqosNetQPolicyName          PrvtHqosNamedItem,
+    prvtHqosNetQPolicyRowStatus     RowStatus,
+    prvtHqosNetQPolicyDescr         PrvtHqosDescrType
+}
+
+prvtHqosNetQPolicyName OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a network egress queue policy."
+    ::= { prvtHqosNetQPolicyEntry 1 }
+
+prvtHqosNetQPolicyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this network egress queue policy."
+    ::= { prvtHqosNetQPolicyEntry 2 }
+
+prvtHqosNetQPolicyDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the network egress queue policy."
+    ::= { prvtHqosNetQPolicyEntry 3 }
+
+prvtHqosNetQPolicyQueueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosNetQPolicyQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Egress Queue Table
+         Entries in this table define queues belonging to network (egress) queue policies."
+    ::= { netQueueObjects 2 }
+
+prvtHqosNetQPolicyQueueEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosNetQPolicyQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosNetQPolicyQueueTable."
+    INDEX       { prvtHqosNetQPolicyName, prvtHqosNetQPolicyQueueId }
+    ::= { prvtHqosNetQPolicyQueueTable 1 }
+
+PrvtHqosNetQPolicyQueueEntry ::= SEQUENCE {
+    prvtHqosNetQPolicyQueueId           PrvtHqosNetQueueIdType,
+    prvtHqosNetQPolicyQueueRowStatus    RowStatus,
+    prvtHqosNetQPolicyQueueLevel        PrvtHqosLevel,
+    prvtHqosNetQPolicyQueueWfq          PrvtHqosNetWfqIdType,
+    prvtHqosNetQPolicyQueueWred         PrvtHqosWredIdType,
+    prvtHqosNetQPolicyQueueShaper       PrvtHqosNetShaperId
+}
+
+prvtHqosNetQPolicyQueueId OBJECT-TYPE
+    SYNTAX      PrvtHqosNetQueueIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a queue belonging to a network (egress) queue policy."
+    ::= { prvtHqosNetQPolicyQueueEntry 1 }
+
+prvtHqosNetQPolicyQueueRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this queue."
+    ::= { prvtHqosNetQPolicyQueueEntry 2 }
+
+prvtHqosNetQPolicyQueueLevel OBJECT-TYPE
+    SYNTAX      PrvtHqosLevel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the level of priority for the queue while feeding to the parent."
+    ::= { prvtHqosNetQPolicyQueueEntry 3 }
+
+prvtHqosNetQPolicyQueueWfq OBJECT-TYPE
+    SYNTAX      PrvtHqosNetWfqIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WFQ profile that needs to be used by the scheduler to which the queue would be feeding to.
+         Must be set to the prvtHqosWfqNetworkPrfId of an entry existing in prvtHqosWfqNetworkPrfTable."
+    ::= { prvtHqosNetQPolicyQueueEntry 4 }
+
+prvtHqosNetQPolicyQueueWred OBJECT-TYPE
+    SYNTAX      PrvtHqosWredIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WRED profile applied to this queue.
+         Must be set to the prvtHqosWredPrfId of an entry existing in prvtHqosWredPrfTable."
+    ::= { prvtHqosNetQPolicyQueueEntry 5 }
+
+prvtHqosNetQPolicyQueueShaper OBJECT-TYPE
+    SYNTAX      PrvtHqosNetShaperId
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaping profile applied to this queue.
+         Must be set to the prvtHqosShaperNetPrfId of an entry existing in prvtHqosShaperNetPrfTable."
+    ::= { prvtHqosNetQPolicyQueueEntry 6 }
+
+prvtHqosNetQPolicyFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosNetQPolicyFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Policy FC Table
+         A list of forwarding classes belonging to network queue policies.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in prvtHqosNetQPolicyFcQueueTable."
+    ::= { netQueueObjects 3 }
+
+prvtHqosNetQPolicyFcEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosNetQPolicyFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosNetQPolicyFcTable."
+    INDEX       { prvtHqosNetQPolicyName, prvtHqosNetQPolicyFcNumber }
+    ::= { prvtHqosNetQPolicyFcTable 1 }
+
+PrvtHqosNetQPolicyFcEntry ::= SEQUENCE {
+    prvtHqosNetQPolicyFcNumber      PrvtHqosFcType,
+    prvtHqosNetQPolicyFcRowStatus   RowStatus
+}
+
+prvtHqosNetQPolicyFcNumber OBJECT-TYPE
+    SYNTAX      PrvtHqosFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The forwarding class to which this row applies."
+    ::= { prvtHqosNetQPolicyFcEntry 1 }
+
+prvtHqosNetQPolicyFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this forwarding class."
+    ::= { prvtHqosNetQPolicyFcEntry 2 }
+
+prvtHqosNetQPolicyFcQueueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosNetQPolicyFcQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Queue Policy FC Queue Table
+         This table maintains, for network queue policies, the mapping of a
+         particular forwarding class traffic type into a specified queue."
+    ::= { netQueueObjects 4 }
+
+prvtHqosNetQPolicyFcQueueEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosNetQPolicyFcQueueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosNetQPolicyFcQueueTable."
+    INDEX       { prvtHqosNetQPolicyName, prvtHqosNetQPolicyFcNumber, 
+                  prvtHqosNetQPolicyFcQueueType, 
+                  prvtHqosNetQPolicyQueueId }
+    ::= { prvtHqosNetQPolicyFcQueueTable 1 }
+
+PrvtHqosNetQPolicyFcQueueEntry ::= SEQUENCE {
+    prvtHqosNetQPolicyFcQueueType       PrvtHqosQueueType,
+    prvtHqosNetQPolicyFcQueueRStatus    RowStatus
+}
+
+prvtHqosNetQPolicyFcQueueType OBJECT-TYPE
+    SYNTAX      PrvtHqosQueueType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type (unicast/multicast/broadcast) of the queue to be assigned to the forwarding class."
+    ::= { prvtHqosNetQPolicyFcQueueEntry 3 }
+
+prvtHqosNetQPolicyFcQueueRStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this queue."
+    ::= { prvtHqosNetQPolicyFcQueueEntry 4 }
+
+prvtHqosNetEgrQStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosNetEgrQStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Egress Queue Statistics Table
+         Entries in this table contain the per-port statistics for
+         network egress queues."
+    ::= { netQueueObjects 5 }
+
+prvtHqosNetEgrQStatsEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosNetEgrQStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosNetEgrQStatsTable."
+    INDEX       { prvtHqosNetQPolicyName, prvtHqosNetQPolicyQueueId, 
+                  ifIndex }
+    ::= { prvtHqosNetEgrQStatsTable 1 }
+
+PrvtHqosNetEgrQStatsEntry ::= SEQUENCE {
+    prvtHqosNetEgrQStatsGrnBytes        PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsGrnPckts        PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsYlwBytes        PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsYlwPckts        PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsTxBytes         PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsTxPckts         PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsWredGrnBytes    PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsWredGrnPckts    PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsWredYlwBytes    PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsWredYlwPckts    PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsPolDropBytes    PrvtHqosStatsCountType,
+    prvtHqosNetEgrQStatsPolDropPckts    PrvtHqosStatsCountType
+}
+
+prvtHqosNetEgrQStatsGrnBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of green traffic."
+    ::= { prvtHqosNetEgrQStatsEntry 2 }
+
+prvtHqosNetEgrQStatsGrnPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of green traffic."
+    ::= { prvtHqosNetEgrQStatsEntry 3 }
+
+prvtHqosNetEgrQStatsYlwBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of yellow traffic."
+    ::= { prvtHqosNetEgrQStatsEntry 4 }
+
+prvtHqosNetEgrQStatsYlwPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of yellow traffic."
+    ::= { prvtHqosNetEgrQStatsEntry 5 }
+
+prvtHqosNetEgrQStatsTxBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of traffic transmitted."
+    ::= { prvtHqosNetEgrQStatsEntry 6 }
+
+prvtHqosNetEgrQStatsTxPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of traffic transmitted."
+    ::= { prvtHqosNetEgrQStatsEntry 7 }
+
+prvtHqosNetEgrQStatsWredGrnBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of green traffic dropped due to the WRED."
+    ::= { prvtHqosNetEgrQStatsEntry 8 }
+
+prvtHqosNetEgrQStatsWredGrnPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of green traffic dropped due to the WRED."
+    ::= { prvtHqosNetEgrQStatsEntry 9 }
+
+prvtHqosNetEgrQStatsWredYlwBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of yellow traffic dropped due to the WRED."
+    ::= { prvtHqosNetEgrQStatsEntry 10 }
+
+prvtHqosNetEgrQStatsWredYlwPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of yellow traffic dropped due to the WRED."
+    ::= { prvtHqosNetEgrQStatsEntry 11 }
+
+prvtHqosNetEgrQStatsPolDropBytes OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of bytes of traffic dropped due to the policer."
+    ::= { prvtHqosNetEgrQStatsEntry 12 }
+
+prvtHqosNetEgrQStatsPolDropPckts OBJECT-TYPE
+    SYNTAX      PrvtHqosStatsCountType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets of traffic dropped due to the policer."
+    ::= { prvtHqosNetEgrQStatsEntry 13 }
+
+schedObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 5 }
+
+prvtHqosSchedIngPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSchedIngPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Scheduler Ingress Policy Table
+         Each entry in this table defines an ingress service scheduler policy.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in the following tables:
+         - prvtHqosSchedIngVirtTable
+         - prvtHqosSchedIngRootTable"
+    ::= { schedObjects 1 }
+
+prvtHqosSchedIngPolicyEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSchedIngPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSchedIngPolicyTable."
+    INDEX       { prvtHqosSchedIngPolicyName }
+    ::= { prvtHqosSchedIngPolicyTable 1 }
+
+PrvtHqosSchedIngPolicyEntry ::= SEQUENCE {
+    prvtHqosSchedIngPolicyName          PrvtHqosNamedItem,
+    prvtHqosSchedIngPolicyRowStatus     RowStatus,
+    prvtHqosSchedIngPolicyDescr         PrvtHqosDescrType
+}
+
+prvtHqosSchedIngPolicyName OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an ingress service scheduler policy."
+    ::= { prvtHqosSchedIngPolicyEntry 1 }
+
+prvtHqosSchedIngPolicyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this ingress service scheduler policy."
+    ::= { prvtHqosSchedIngPolicyEntry 2 }
+
+prvtHqosSchedIngPolicyDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the ingress service scheduler policy"
+    ::= { prvtHqosSchedIngPolicyEntry 3 }
+
+prvtHqosSchedIngVirtTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSchedIngVirtEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Ingress Virtual Scheduler Table
+         Each entry in this table defines an ingress virtual (L2) scheduler."
+    ::= { schedObjects 2 }
+
+prvtHqosSchedIngVirtEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSchedIngVirtEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSchedIngVirtTable."
+    INDEX       { prvtHqosSchedIngPolicyName, prvtHqosSchedIngVirtName }
+    ::= { prvtHqosSchedIngVirtTable 1 }
+
+PrvtHqosSchedIngVirtEntry ::= SEQUENCE {
+    prvtHqosSchedIngVirtName        PrvtHqosNamedItem,
+    prvtHqosSchedIngVirtRowStatus   RowStatus,
+    prvtHqosSchedIngVirtDescr       PrvtHqosDescrType,
+    prvtHqosSchedIngVirtParent      PrvtHqosNamedItem,
+    prvtHqosSchedIngVirtLevel       PrvtHqosLevel,
+    prvtHqosSchedIngVirtWfqProfile  PrvtHqosServSchedWfqIdType,
+    prvtHqosSchedIngVirtShaper      PrvtHqosL2ShaperId
+}
+
+prvtHqosSchedIngVirtName OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a virtual scheduler belonging to an ingress service policy."
+    ::= { prvtHqosSchedIngVirtEntry 1 }
+
+prvtHqosSchedIngVirtRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this ingress virtual scheduler."
+    ::= { prvtHqosSchedIngVirtEntry 2 }
+
+prvtHqosSchedIngVirtDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the ingress virtual scheduler."
+    ::= { prvtHqosSchedIngVirtEntry 3 }
+
+prvtHqosSchedIngVirtParent OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The scheduler to which this scheduler would be feeding to.
+         Must be set to the prvtHqosSchedIngRootName of an entry in prvtHqosSchedIngRootTable
+         that has the same prvtHqosSchedIngPolicyName."
+    ::= { prvtHqosSchedIngVirtEntry 4 }
+
+prvtHqosSchedIngVirtLevel OBJECT-TYPE
+    SYNTAX      PrvtHqosLevel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The priority level of the scheduler."
+    ::= { prvtHqosSchedIngVirtEntry 5 }
+
+prvtHqosSchedIngVirtWfqProfile OBJECT-TYPE
+    SYNTAX      PrvtHqosServSchedWfqIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WFQ profile number for this scheduler.
+         Must be set to the prvtHqosWfqSchedIngPrfId of an entry in prvtHqosWfqSchedIngPrfTable."
+    ::= { prvtHqosSchedIngVirtEntry 6 }
+
+prvtHqosSchedIngVirtShaper OBJECT-TYPE
+    SYNTAX      PrvtHqosL2ShaperId
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaping profile applied to the scheduler.
+         Must be set to the prvtHqosShaperL2IngPrfId of an entry in prvtHqosShaperL2IngPrfTable."
+    ::= { prvtHqosSchedIngVirtEntry 7 }
+
+prvtHqosSchedIngRootTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSchedIngRootEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Ingress Root Scheduler Table
+         Each entry in this table defines an ingress root scheduler.
+         A maximum of 2 entries may be created per policy (prvtHqosSchedIngPolicyName)."
+    ::= { schedObjects 3 }
+
+prvtHqosSchedIngRootEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSchedIngRootEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSchedIngRootTable."
+    INDEX       { prvtHqosSchedIngPolicyName, prvtHqosSchedIngRootName }
+    ::= { prvtHqosSchedIngRootTable 1 }
+
+PrvtHqosSchedIngRootEntry ::= SEQUENCE {
+    prvtHqosSchedIngRootName        PrvtHqosNamedItem,
+    prvtHqosSchedIngRootRowStatus   RowStatus,
+    prvtHqosSchedIngRootDescr       PrvtHqosDescrType,
+    prvtHqosSchedIngRootLevel       PrvtHqosLevel,
+    prvtHqosSchedIngRootShaper      PrvtHqosL1ShaperId
+}
+
+prvtHqosSchedIngRootName OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an ingress root scheduler belonging to an ingress service policy."
+    ::= { prvtHqosSchedIngRootEntry 1 }
+
+prvtHqosSchedIngRootRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this ingress root scheduler."
+    ::= { prvtHqosSchedIngRootEntry 2 }
+
+prvtHqosSchedIngRootDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the ingress root scheduler."
+    ::= { prvtHqosSchedIngRootEntry 3 }
+
+prvtHqosSchedIngRootLevel OBJECT-TYPE
+    SYNTAX      PrvtHqosLevel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The priority level of the ingress root scheduler."
+    ::= { prvtHqosSchedIngRootEntry 4 }
+
+prvtHqosSchedIngRootShaper OBJECT-TYPE
+    SYNTAX      PrvtHqosL1ShaperId
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaping profile applied to the ingress root scheduler.
+         Must be set to the prvtHqosShaperL1IngPrfId of an entry in prvtHqosShaperL1IngPrfTable."
+    ::= { prvtHqosSchedIngRootEntry 5 }
+
+prvtHqosSchedEgrPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSchedEgrPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Egress Service Scheduler Policy Table
+         Each entry in this table defines an egress service scheduler policy.
+         Note that deletion of a row in this table will also result in
+         the deletion of the dependent rows in the following tables:
+         - prvtHqosSchedEgrVirtTable
+         - prvtHqosSchedEgrRootTable"
+    ::= { schedObjects 4 }
+
+prvtHqosSchedEgrPolicyEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSchedEgrPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSchedEgrPolicyTable."
+    INDEX       { prvtHqosSchedEgrPolicyName }
+    ::= { prvtHqosSchedEgrPolicyTable 1 }
+
+PrvtHqosSchedEgrPolicyEntry ::= SEQUENCE {
+    prvtHqosSchedEgrPolicyName          PrvtHqosNamedItem,
+    prvtHqosSchedEgrPolicyRowStatus     RowStatus,
+    prvtHqosSchedEgrPolicyDescr         PrvtHqosDescrType
+}
+
+prvtHqosSchedEgrPolicyName OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an egress scheduler policy."
+    ::= { prvtHqosSchedEgrPolicyEntry 1 }
+
+prvtHqosSchedEgrPolicyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this egress scheduler policy."
+    ::= { prvtHqosSchedEgrPolicyEntry 2 }
+
+prvtHqosSchedEgrPolicyDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the egress scheduler policy"
+    ::= { prvtHqosSchedEgrPolicyEntry 3 }
+
+prvtHqosSchedEgrVirtTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSchedEgrVirtEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Egress Virtual Scheduler Table
+         Each entry in this table defines an egress virtual (L2) scheduler."
+    ::= { schedObjects 5 }
+
+prvtHqosSchedEgrVirtEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSchedEgrVirtEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSchedEgrVirtTable."
+    INDEX       { prvtHqosSchedEgrPolicyName, prvtHqosSchedEgrVirtName }
+    ::= { prvtHqosSchedEgrVirtTable 1 }
+
+PrvtHqosSchedEgrVirtEntry ::= SEQUENCE {
+    prvtHqosSchedEgrVirtName        PrvtHqosNamedItem,
+    prvtHqosSchedEgrVirtRowStatus   RowStatus,
+    prvtHqosSchedEgrVirtDescr       PrvtHqosDescrType,
+    prvtHqosSchedEgrVirtParent      PrvtHqosNamedItem,
+    prvtHqosSchedEgrVirtLevel       PrvtHqosLevel,
+    prvtHqosSchedEgrVirtWfqProfile  PrvtHqosServSchedWfqIdType,
+    prvtHqosSchedEgrVirtShaper      PrvtHqosL2ShaperId
+}
+
+prvtHqosSchedEgrVirtName OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a virtual scheduler belonging to an egress service policy."
+    ::= { prvtHqosSchedEgrVirtEntry 1 }
+
+prvtHqosSchedEgrVirtRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this egress virtual scheduler."
+    ::= { prvtHqosSchedEgrVirtEntry 2 }
+
+prvtHqosSchedEgrVirtDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the egress virtual scheduler."
+    ::= { prvtHqosSchedEgrVirtEntry 3 }
+
+prvtHqosSchedEgrVirtParent OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The scheduler to which this scheduler would be feeding to.
+         Must be set to the prvtHqosSchedEgrRootName of an entry in prvtHqosSchedEgrRootTable
+         that has the same prvtHqosSchedEgrPolicyName."
+    ::= { prvtHqosSchedEgrVirtEntry 4 }
+
+prvtHqosSchedEgrVirtLevel OBJECT-TYPE
+    SYNTAX      PrvtHqosLevel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The priority level of the scheduler."
+    ::= { prvtHqosSchedEgrVirtEntry 5 }
+
+prvtHqosSchedEgrVirtWfqProfile OBJECT-TYPE
+    SYNTAX      PrvtHqosServSchedWfqIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WFQ profile number for this scheduler.
+         Must be set to the prvtHqosWfqSchedEgrPrfId of an entry in prvtHqosWfqSchedEgrPrfTable."
+    ::= { prvtHqosSchedEgrVirtEntry 6 }
+
+prvtHqosSchedEgrVirtShaper OBJECT-TYPE
+    SYNTAX      PrvtHqosL2ShaperId
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaping profile applied to this scheduler.
+         Must be set to the prvtHqosShaperL2EgrPrfId of an entry in prvtHqosShaperL2EgrPrfTable."
+    ::= { prvtHqosSchedEgrVirtEntry 7 }
+
+prvtHqosSchedEgrRootTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosSchedEgrRootEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Egress Root Scheduler Table
+         Each entry in this table defines an egress root scheduler.
+         A maximum of 2 entries may be created per policy (prvtHqosSchedEgrPolicyName)."
+    ::= { schedObjects 6 }
+
+prvtHqosSchedEgrRootEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosSchedEgrRootEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosSchedEgrRootTable."
+    INDEX       { prvtHqosSchedEgrPolicyName, prvtHqosSchedEgrRootName }
+    ::= { prvtHqosSchedEgrRootTable 1 }
+
+PrvtHqosSchedEgrRootEntry ::= SEQUENCE {
+    prvtHqosSchedEgrRootName        PrvtHqosNamedItem,
+    prvtHqosSchedEgrRootRowStatus   RowStatus,
+    prvtHqosSchedEgrRootDescr       PrvtHqosDescrType,
+    prvtHqosSchedEgrRootLevel       PrvtHqosLevel,
+    prvtHqosSchedEgrRootShaper      PrvtHqosL1ShaperId
+}
+
+prvtHqosSchedEgrRootName OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItem
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an egress root scheduler belonging to an egress service policy."
+    ::= { prvtHqosSchedEgrRootEntry 1 }
+
+prvtHqosSchedEgrRootRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this egress root scheduler."
+    ::= { prvtHqosSchedEgrRootEntry 2 }
+
+prvtHqosSchedEgrRootDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the egress root scheduler."
+    ::= { prvtHqosSchedEgrRootEntry 3 }
+
+prvtHqosSchedEgrRootLevel OBJECT-TYPE
+    SYNTAX      PrvtHqosLevel
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The priority level of the egress root scheduler."
+    ::= { prvtHqosSchedEgrRootEntry 4 }
+
+prvtHqosSchedEgrRootShaper OBJECT-TYPE
+    SYNTAX      PrvtHqosL1ShaperId
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaping profile applied to the egress root scheduler.
+         Must be set to the prvtHqosShaperL1EgrPrfId of an entry in prvtHqosShaperL1EgrPrfTable."
+    ::= { prvtHqosSchedEgrRootEntry 5 }
+
+wredObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 6 }
+
+prvtHqosWredPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosWredPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "WRED Profile Table
+         Each entry in this table defines a WRED profile."
+    ::= { wredObjects 1 }
+
+prvtHqosWredPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosWredPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosWredPrfTable."
+    INDEX       { prvtHqosWredPrfId }
+    ::= { prvtHqosWredPrfTable 1 }
+
+PrvtHqosWredPrfEntry ::= SEQUENCE {
+    prvtHqosWredPrfId                   PrvtHqosWredIdType,
+    prvtHqosWredPrfRowStatus            RowStatus,
+    prvtHqosWredPrfDescr                PrvtHqosDescrType,
+    prvtHqosWredPrfGreenMinAverage      PrvtHqosWredMinValue,
+    prvtHqosWredPrfGreenMaxAverage      PrvtHqosWredMaxValue,
+    prvtHqosWredPrfGreenProbability     PrvtHqosWredProbValue,
+    prvtHqosWredPrfYellowMinAverage     PrvtHqosWredMinValue,
+    prvtHqosWredPrfYellowMaxAverage     PrvtHqosWredMaxValue,
+    prvtHqosWredPrfYellowProbability    PrvtHqosWredProbValue
+}
+
+prvtHqosWredPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosWredIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a WRED profile."
+    ::= { prvtHqosWredPrfEntry 1 }
+
+prvtHqosWredPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this WRED profile."
+    ::= { prvtHqosWredPrfEntry 2 }
+
+prvtHqosWredPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the WRED profile."
+    ::= { prvtHqosWredPrfEntry 3 }
+
+prvtHqosWredPrfGreenMinAverage OBJECT-TYPE
+    SYNTAX      PrvtHqosWredMinValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Drop start threshold for the green traffic in kilobytes."
+    ::= { prvtHqosWredPrfEntry 4 }
+
+prvtHqosWredPrfGreenMaxAverage OBJECT-TYPE
+    SYNTAX      PrvtHqosWredMaxValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Absolute drop threshold for the green traffic in kilobytes."
+    ::= { prvtHqosWredPrfEntry 5 }
+
+prvtHqosWredPrfGreenProbability OBJECT-TYPE
+    SYNTAX      PrvtHqosWredProbValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Drop probability slope for the green traffic."
+    ::= { prvtHqosWredPrfEntry 6 }
+
+prvtHqosWredPrfYellowMinAverage OBJECT-TYPE
+    SYNTAX      PrvtHqosWredMinValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Drop start threshold for the yellow traffic in kilobytes."
+    ::= { prvtHqosWredPrfEntry 7 }
+
+prvtHqosWredPrfYellowMaxAverage OBJECT-TYPE
+    SYNTAX      PrvtHqosWredMaxValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Absolute drop threshold for the yellow traffic in kilobytes."
+    ::= { prvtHqosWredPrfEntry 8 }
+
+prvtHqosWredPrfYellowProbability OBJECT-TYPE
+    SYNTAX      PrvtHqosWredProbValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Drop probability slope for the yellow traffic."
+    ::= { prvtHqosWredPrfEntry 9 }
+
+shaperObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 7 }
+
+prvtHqosShaperL1IngPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosShaperL1IngPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Root(L1) Scheduler Shaper Ingress Profile Table
+         Each entry in this table defines a set of shaping parameters that may be enforced
+         on an ingress root scheduler."
+    ::= { shaperObjects 1 }
+
+prvtHqosShaperL1IngPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosShaperL1IngPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosShaperL1IngPrfTable."
+    INDEX       { prvtHqosShaperL1IngPrfId }
+    ::= { prvtHqosShaperL1IngPrfTable 1 }
+
+PrvtHqosShaperL1IngPrfEntry ::= SEQUENCE {
+    prvtHqosShaperL1IngPrfId            PrvtHqosL1ShaperId,
+    prvtHqosShaperL1IngPrfRowStatus     RowStatus,
+    prvtHqosShaperL1IngPrfCIR           PrvtHqosRateValueL1,
+    prvtHqosShaperL1IngPrfPIR           PrvtHqosRateValueL1,
+    prvtHqosShaperL1IngPrfCBS           PrvtHqosBurstValueL1,
+    prvtHqosShaperL1IngPrfPBS           PrvtHqosBurstValueL1,
+    prvtHqosShaperL1IngPrfDescr         PrvtHqosDescrType
+}
+
+prvtHqosShaperL1IngPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosL1ShaperId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a root scheduler shaper ingress profile."
+    ::= { prvtHqosShaperL1IngPrfEntry 1 }
+
+prvtHqosShaperL1IngPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this shaper profile."
+    ::= { prvtHqosShaperL1IngPrfEntry 2 }
+
+prvtHqosShaperL1IngPrfCIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueL1
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed information rate in kbps."
+    ::= { prvtHqosShaperL1IngPrfEntry 3 }
+
+prvtHqosShaperL1IngPrfPIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueL1
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peak information rate allowed in kbps."
+    ::= { prvtHqosShaperL1IngPrfEntry 4 }
+
+prvtHqosShaperL1IngPrfCBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueL1
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed burst size allowed in kilobytes."
+    ::= { prvtHqosShaperL1IngPrfEntry 5 }
+
+prvtHqosShaperL1IngPrfPBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueL1
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum burst size allowed in kilobytes."
+    ::= { prvtHqosShaperL1IngPrfEntry 6 }
+
+prvtHqosShaperL1IngPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the shaper profile."
+    ::= { prvtHqosShaperL1IngPrfEntry 7 }
+
+prvtHqosShaperL1EgrPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosShaperL1EgrPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Root(L1) Scheduler Shaper Egress Profile Table
+         Each entry in this table defines a set of shaping parameters that may be enforced
+         on an egress root scheduler."
+    ::= { shaperObjects 2 }
+
+prvtHqosShaperL1EgrPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosShaperL1EgrPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosShaperL1EgrPrfTable."
+    INDEX       { prvtHqosShaperL1EgrPrfId }
+    ::= { prvtHqosShaperL1EgrPrfTable 1 }
+
+PrvtHqosShaperL1EgrPrfEntry ::= SEQUENCE {
+    prvtHqosShaperL1EgrPrfId            PrvtHqosL1ShaperId,
+    prvtHqosShaperL1EgrPrfRowStatus     RowStatus,
+    prvtHqosShaperL1EgrPrfCIR           PrvtHqosRateValueL1,
+    prvtHqosShaperL1EgrPrfPIR           PrvtHqosRateValueL1,
+    prvtHqosShaperL1EgrPrfCBS           PrvtHqosBurstValueL1,
+    prvtHqosShaperL1EgrPrfPBS           PrvtHqosBurstValueL1,
+    prvtHqosShaperL1EgrPrfDescr         PrvtHqosDescrType
+}
+
+prvtHqosShaperL1EgrPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosL1ShaperId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a root scheduler shaper egress profile."
+    ::= { prvtHqosShaperL1EgrPrfEntry 1 }
+
+prvtHqosShaperL1EgrPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this shaper profile."
+    ::= { prvtHqosShaperL1EgrPrfEntry 2 }
+
+prvtHqosShaperL1EgrPrfCIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueL1
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed information rate in kbps."
+    ::= { prvtHqosShaperL1EgrPrfEntry 3 }
+
+prvtHqosShaperL1EgrPrfPIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueL1
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peak information rate allowed in kbps."
+    ::= { prvtHqosShaperL1EgrPrfEntry 4 }
+
+prvtHqosShaperL1EgrPrfCBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueL1
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed burst size allowed in kilobytes."
+    ::= { prvtHqosShaperL1EgrPrfEntry 5 }
+
+prvtHqosShaperL1EgrPrfPBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueL1
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum burst size allowed in kilobytes."
+    ::= { prvtHqosShaperL1EgrPrfEntry 6 }
+
+prvtHqosShaperL1EgrPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the shaper profile."
+    ::= { prvtHqosShaperL1EgrPrfEntry 7 }
+
+prvtHqosShaperL2IngPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosShaperL2IngPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "(L2) Scheduler Shaper Ingress Profile Table
+         Each entry in this table defines a set of shaping parameters that may be enforced
+         on an ingress L2 scheduler."
+    ::= { shaperObjects 3 }
+
+prvtHqosShaperL2IngPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosShaperL2IngPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosShaperL2IngPrfTable."
+    INDEX       { prvtHqosShaperL2IngPrfId }
+    ::= { prvtHqosShaperL2IngPrfTable 1 }
+
+PrvtHqosShaperL2IngPrfEntry ::= SEQUENCE {
+    prvtHqosShaperL2IngPrfId            PrvtHqosL2ShaperId,
+    prvtHqosShaperL2IngPrfRowStatus     RowStatus,
+    prvtHqosShaperL2IngPrfCIR           PrvtHqosRateValueL2,
+    prvtHqosShaperL2IngPrfPIR           PrvtHqosRateValueL2,
+    prvtHqosShaperL2IngPrfCBS           PrvtHqosBurstValueL2,
+    prvtHqosShaperL2IngPrfPBS           PrvtHqosBurstValueL2,
+    prvtHqosShaperL2IngPrfDescr         PrvtHqosDescrType
+}
+
+prvtHqosShaperL2IngPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosL2ShaperId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a L2 scheduler shaper ingress profile."
+    ::= { prvtHqosShaperL2IngPrfEntry 1 }
+
+prvtHqosShaperL2IngPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this shaper profile."
+    ::= { prvtHqosShaperL2IngPrfEntry 2 }
+
+prvtHqosShaperL2IngPrfCIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueL2
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed information rate in kbps."
+    ::= { prvtHqosShaperL2IngPrfEntry 3 }
+
+prvtHqosShaperL2IngPrfPIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueL2
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peak information rate allowed in kbps."
+    ::= { prvtHqosShaperL2IngPrfEntry 4 }
+
+prvtHqosShaperL2IngPrfCBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueL2
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed burst size allowed in kilobytes."
+    ::= { prvtHqosShaperL2IngPrfEntry 5 }
+
+prvtHqosShaperL2IngPrfPBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueL2
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum burst size allowed in kilobytes."
+    ::= { prvtHqosShaperL2IngPrfEntry 6 }
+
+prvtHqosShaperL2IngPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the profile."
+    ::= { prvtHqosShaperL2IngPrfEntry 7 }
+
+prvtHqosShaperL2EgrPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosShaperL2EgrPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "(L2) Scheduler Shaper Egress Profile Table
+         Each entry in this table defines a set of shaping parameters that may be enforced
+         on an egress L2 scheduler."
+    ::= { shaperObjects 4 }
+
+prvtHqosShaperL2EgrPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosShaperL2EgrPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosShaperL2EgrPrfTable."
+    INDEX       { prvtHqosShaperL2EgrPrfId }
+    ::= { prvtHqosShaperL2EgrPrfTable 1 }
+
+PrvtHqosShaperL2EgrPrfEntry ::= SEQUENCE {
+    prvtHqosShaperL2EgrPrfId            PrvtHqosL2ShaperId,
+    prvtHqosShaperL2EgrPrfRowStatus     RowStatus,
+    prvtHqosShaperL2EgrPrfCIR           PrvtHqosRateValueL2,
+    prvtHqosShaperL2EgrPrfPIR           PrvtHqosRateValueL2,
+    prvtHqosShaperL2EgrPrfCBS           PrvtHqosBurstValueL2,
+    prvtHqosShaperL2EgrPrfPBS           PrvtHqosBurstValueL2,
+    prvtHqosShaperL2EgrPrfDescr         PrvtHqosDescrType
+}
+
+prvtHqosShaperL2EgrPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosL2ShaperId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a L2 scheduler shaper egress profile."
+    ::= { prvtHqosShaperL2EgrPrfEntry 1 }
+
+prvtHqosShaperL2EgrPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this shaper profile."
+    ::= { prvtHqosShaperL2EgrPrfEntry 2 }
+
+prvtHqosShaperL2EgrPrfCIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueL2
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed information rate in kbps."
+    ::= { prvtHqosShaperL2EgrPrfEntry 3 }
+
+prvtHqosShaperL2EgrPrfPIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueL2
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peak information rate allowed in kbps."
+    ::= { prvtHqosShaperL2EgrPrfEntry 4 }
+
+prvtHqosShaperL2EgrPrfCBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueL2
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed burst size allowed in kilobytes."
+    ::= { prvtHqosShaperL2EgrPrfEntry 5 }
+
+prvtHqosShaperL2EgrPrfPBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueL2
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum burst size allowed in kilobytes."
+    ::= { prvtHqosShaperL2EgrPrfEntry 6 }
+
+prvtHqosShaperL2EgrPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the shaper profile."
+    ::= { prvtHqosShaperL2EgrPrfEntry 7 }
+
+prvtHqosShaperNetPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosShaperNetPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network Shaper Profile Table
+         Each entry in this table defines a set of shaping parameters that may be enforced
+         on a network scheduler."
+    ::= { shaperObjects 5 }
+
+prvtHqosShaperNetPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosShaperNetPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosShaperNetPrfTable."
+    INDEX       { prvtHqosShaperNetPrfId }
+    ::= { prvtHqosShaperNetPrfTable 1 }
+
+PrvtHqosShaperNetPrfEntry ::= SEQUENCE {
+    prvtHqosShaperNetPrfId          PrvtHqosNetShaperId,
+    prvtHqosShaperNetPrfRowStatus   RowStatus,
+    prvtHqosShaperNetPrfCIR         PrvtHqosRateValueNet,
+    prvtHqosShaperNetPrfPIR         PrvtHqosRateValueNet,
+    prvtHqosShaperNetPrfCBS         PrvtHqosBurstValueNet,
+    prvtHqosShaperNetPrfPBS         PrvtHqosBurstValueNet,
+    prvtHqosShaperNetPrfDescr       PrvtHqosDescrType
+}
+
+prvtHqosShaperNetPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosNetShaperId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a network scheduler shaper profile."
+    ::= { prvtHqosShaperNetPrfEntry 1 }
+
+prvtHqosShaperNetPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this shaper profile."
+    ::= { prvtHqosShaperNetPrfEntry 2 }
+
+prvtHqosShaperNetPrfCIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueNet
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed information rate in kbps."
+    ::= { prvtHqosShaperNetPrfEntry 3 }
+
+prvtHqosShaperNetPrfPIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueNet
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peak information rate allowed in kbps."
+    ::= { prvtHqosShaperNetPrfEntry 4 }
+
+prvtHqosShaperNetPrfCBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueNet
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed burst size allowed in kilobytes."
+    ::= { prvtHqosShaperNetPrfEntry 5 }
+
+prvtHqosShaperNetPrfPBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueNet
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum burst size allowed in kilobytes."
+    ::= { prvtHqosShaperNetPrfEntry 6 }
+
+prvtHqosShaperNetPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the shaper profile."
+    ::= { prvtHqosShaperNetPrfEntry 7 }
+
+prvtHqosShaperIfPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosShaperIfPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface Shaper Profile Table
+         Each entry in this table defines a set of shaping parameters that may be enforced
+         on an interface."
+    ::= { shaperObjects 6 }
+
+prvtHqosShaperIfPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosShaperIfPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosShaperIfPrfTable."
+    INDEX       { prvtHqosShaperIfPrfId }
+    ::= { prvtHqosShaperIfPrfTable 1 }
+
+PrvtHqosShaperIfPrfEntry ::= SEQUENCE {
+    prvtHqosShaperIfPrfId           PrvtHqosIfShaperId,
+    prvtHqosShaperIfPrfRowStatus    RowStatus,
+    prvtHqosShaperIfPrfCIR          PrvtHqosRateValueNet,
+    prvtHqosShaperIfPrfPIR          PrvtHqosRateValueNet,
+    prvtHqosShaperIfPrfCBS          PrvtHqosBurstValueIntf,
+    prvtHqosShaperIfPrfPBS          PrvtHqosBurstValueIntf,
+    prvtHqosShaperIfPrfDescr        PrvtHqosDescrType
+}
+
+prvtHqosShaperIfPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosIfShaperId
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an interface shaper profile."
+    ::= { prvtHqosShaperIfPrfEntry 1 }
+
+prvtHqosShaperIfPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this interface shaper profile."
+    ::= { prvtHqosShaperIfPrfEntry 2 }
+
+prvtHqosShaperIfPrfCIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueNet
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed information rate in kbps."
+    ::= { prvtHqosShaperIfPrfEntry 3 }
+
+prvtHqosShaperIfPrfPIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueNet
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peak information rate allowed in kbps."
+    ::= { prvtHqosShaperIfPrfEntry 4 }
+
+prvtHqosShaperIfPrfCBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueIntf
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed burst size allowed in kilobytes."
+    ::= { prvtHqosShaperIfPrfEntry 5 }
+
+prvtHqosShaperIfPrfPBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueIntf
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum burst size allowed in kilobytes."
+    ::= { prvtHqosShaperIfPrfEntry 6 }
+
+prvtHqosShaperIfPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the shaper profile."
+    ::= { prvtHqosShaperIfPrfEntry 7 }
+
+wfqObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 8 }
+
+prvtHqosWfqSvcIngPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosWfqSvcIngPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress WFQ Profile Table
+         Each entry in this table defines a service ingress WFQ profile."
+    ::= { wfqObjects 1 }
+
+prvtHqosWfqSvcIngPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosWfqSvcIngPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosWfqSvcIngPrfTable."
+    INDEX       { prvtHqosWfqSvcIngPrfId }
+    ::= { prvtHqosWfqSvcIngPrfTable 1 }
+
+PrvtHqosWfqSvcIngPrfEntry ::= SEQUENCE {
+    prvtHqosWfqSvcIngPrfId          PrvtHqosServWfqIdType,
+    prvtHqosWfqSvcIngPrfRowStatus   RowStatus,
+    prvtHqosWfqSvcIngPrfCirWeight   PrvtHqosWeight,
+    prvtHqosWfqSvcIngPrfDescr       PrvtHqosDescrType
+}
+
+prvtHqosWfqSvcIngPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosServWfqIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an ingress WFQ service profile."
+    ::= { prvtHqosWfqSvcIngPrfEntry 1 }
+
+prvtHqosWfqSvcIngPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this ingress WFQ service profile."
+    ::= { prvtHqosWfqSvcIngPrfEntry 2 }
+
+prvtHqosWfqSvcIngPrfCirWeight OBJECT-TYPE
+    SYNTAX      PrvtHqosWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The relative weight for the packets where the WFQ service profile
+         is applied."
+    ::= { prvtHqosWfqSvcIngPrfEntry 3 }
+
+prvtHqosWfqSvcIngPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the WFQ service profile."
+    ::= { prvtHqosWfqSvcIngPrfEntry 4 }
+
+prvtHqosWfqSvcEgrPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosWfqSvcEgrPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service WFQ Egress Profile Table
+         Each entry in this table defines a service egress WFQ profile."
+    ::= { wfqObjects 2 }
+
+prvtHqosWfqSvcEgrPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosWfqSvcEgrPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosWfqSvcEgrPrfTable."
+    INDEX       { prvtHqosWfqSvcEgrPrfId }
+    ::= { prvtHqosWfqSvcEgrPrfTable 1 }
+
+PrvtHqosWfqSvcEgrPrfEntry ::= SEQUENCE {
+    prvtHqosWfqSvcEgrPrfId          PrvtHqosServWfqIdType,
+    prvtHqosWfqSvcEgrPrfRowStatus   RowStatus,
+    prvtHqosWfqSvcEgrPrfCirWeight   PrvtHqosWeight,
+    prvtHqosWfqSvcEgrPrfDescr       PrvtHqosDescrType
+}
+
+prvtHqosWfqSvcEgrPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosServWfqIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an egress WFQ service profile."
+    ::= { prvtHqosWfqSvcEgrPrfEntry 1 }
+
+prvtHqosWfqSvcEgrPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this egress WFQ service profile."
+    ::= { prvtHqosWfqSvcEgrPrfEntry 2 }
+
+prvtHqosWfqSvcEgrPrfCirWeight OBJECT-TYPE
+    SYNTAX      PrvtHqosWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The relative weight for the packets where the WFQ service profile
+         is applied."
+    ::= { prvtHqosWfqSvcEgrPrfEntry 3 }
+
+prvtHqosWfqSvcEgrPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the WFQ service profile."
+    ::= { prvtHqosWfqSvcEgrPrfEntry 4 }
+
+prvtHqosWfqSchedIngPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosWfqSchedIngPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Scheduler Ingress WFQ Profile Table
+         Each entry in this table defines a scheduler ingress WFQ profile.
+         A maximum of 16 entries may be created."
+    ::= { wfqObjects 3 }
+
+prvtHqosWfqSchedIngPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosWfqSchedIngPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosWfqSchedIngPrfTable."
+    INDEX       { prvtHqosWfqSchedIngPrfId }
+    ::= { prvtHqosWfqSchedIngPrfTable 1 }
+
+PrvtHqosWfqSchedIngPrfEntry ::= SEQUENCE {
+    prvtHqosWfqSchedIngPrfId            PrvtHqosServSchedWfqIdType,
+    prvtHqosWfqSchedIngPrfRowStatus     RowStatus,
+    prvtHqosWfqSchedIngPrfWeight        PrvtHqosWeight,
+    prvtHqosWfqSchedIngPrfCirWeight     PrvtHqosWeight,
+    prvtHqosWfqSchedIngPrfDescr         PrvtHqosDescrType
+}
+
+prvtHqosWfqSchedIngPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosServSchedWfqIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an ingress WFQ scheduler profile."
+    ::= { prvtHqosWfqSchedIngPrfEntry 1 }
+
+prvtHqosWfqSchedIngPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this ingress WFQ scheduler profile."
+    ::= { prvtHqosWfqSchedIngPrfEntry 2 }
+
+prvtHqosWfqSchedIngPrfWeight OBJECT-TYPE
+    SYNTAX      PrvtHqosWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The relative weight for the packets where the WFQ scheduler profile
+         is applied."
+    ::= { prvtHqosWfqSchedIngPrfEntry 3 }
+
+prvtHqosWfqSchedIngPrfCirWeight OBJECT-TYPE
+    SYNTAX      PrvtHqosWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The relative CIR weight for the packets where the WFQ scheduler profile
+         is applied."
+    ::= { prvtHqosWfqSchedIngPrfEntry 4 }
+
+prvtHqosWfqSchedIngPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the WFQ scheduler profile."
+    ::= { prvtHqosWfqSchedIngPrfEntry 5 }
+
+prvtHqosWfqSchedEgrPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosWfqSchedEgrPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Scheduler Egress WFQ Profile Table
+         Each entry in this table defines a scheduler egress WFQ profile.
+         A maximum of 16 entries may be created."
+    ::= { wfqObjects 4 }
+
+prvtHqosWfqSchedEgrPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosWfqSchedEgrPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosWfqSchedEgrPrfTable."
+    INDEX       { prvtHqosWfqSchedEgrPrfId }
+    ::= { prvtHqosWfqSchedEgrPrfTable 1 }
+
+PrvtHqosWfqSchedEgrPrfEntry ::= SEQUENCE {
+    prvtHqosWfqSchedEgrPrfId            PrvtHqosServSchedWfqIdType,
+    prvtHqosWfqSchedEgrPrfRowStatus     RowStatus,
+    prvtHqosWfqSchedEgrPrfWeight        PrvtHqosWeight,
+    prvtHqosWfqSchedEgrPrfCirWeight     PrvtHqosWeight,
+    prvtHqosWfqSchedEgrPrfDescr         PrvtHqosDescrType
+}
+
+prvtHqosWfqSchedEgrPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosServSchedWfqIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an egress WFQ scheduler profile."
+    ::= { prvtHqosWfqSchedEgrPrfEntry 1 }
+
+prvtHqosWfqSchedEgrPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this egress WFQ scheduler profile."
+    ::= { prvtHqosWfqSchedEgrPrfEntry 2 }
+
+prvtHqosWfqSchedEgrPrfWeight OBJECT-TYPE
+    SYNTAX      PrvtHqosWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The relative weight for the packets where the WFQ scheduler profile
+         is applied."
+    ::= { prvtHqosWfqSchedEgrPrfEntry 3 }
+
+prvtHqosWfqSchedEgrPrfCirWeight OBJECT-TYPE
+    SYNTAX      PrvtHqosWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The relative CIR weight for the packets where the WFQ scheduler profile
+         is applied."
+    ::= { prvtHqosWfqSchedEgrPrfEntry 4 }
+
+prvtHqosWfqSchedEgrPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the WFQ scheduler profile."
+    ::= { prvtHqosWfqSchedEgrPrfEntry 5 }
+
+prvtHqosWfqNetworkPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosWfqNetworkPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Network WFQ Profile Table
+         Each entry in this table defines a network WFQ profile.
+         A maximum of 16 entries may be created."
+    ::= { wfqObjects 5 }
+
+prvtHqosWfqNetworkPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosWfqNetworkPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosWfqNetworkPrfTable."
+    INDEX       { prvtHqosWfqNetworkPrfId }
+    ::= { prvtHqosWfqNetworkPrfTable 1 }
+
+PrvtHqosWfqNetworkPrfEntry ::= SEQUENCE {
+    prvtHqosWfqNetworkPrfId         PrvtHqosNetWfqIdType,
+    prvtHqosWfqNetworkPrfRowStatus  RowStatus,
+    prvtHqosWfqNetworkPrfWeight     PrvtHqosWeight,
+    prvtHqosWfqNetworkPrfCirWeight  PrvtHqosWeight,
+    prvtHqosWfqNetworkPrfDescr      PrvtHqosDescrType
+}
+
+prvtHqosWfqNetworkPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosNetWfqIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a WFQ network profile."
+    ::= { prvtHqosWfqNetworkPrfEntry 1 }
+
+prvtHqosWfqNetworkPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this WFQ network profile."
+    ::= { prvtHqosWfqNetworkPrfEntry 2 }
+
+prvtHqosWfqNetworkPrfWeight OBJECT-TYPE
+    SYNTAX      PrvtHqosWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The relative weight for the packets where the WFQ network profile
+         is applied."
+    ::= { prvtHqosWfqNetworkPrfEntry 3 }
+
+prvtHqosWfqNetworkPrfCirWeight OBJECT-TYPE
+    SYNTAX      PrvtHqosWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The relative CIR weight for the packets where the WFQ network profile
+         is applied."
+    ::= { prvtHqosWfqNetworkPrfEntry 4 }
+
+prvtHqosWfqNetworkPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the WFQ network profile."
+    ::= { prvtHqosWfqNetworkPrfEntry 5 }
+
+ifObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 9 }
+
+prvtHqosIfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "HQOS Interface Table
+         Contains HQOS specific information regarding an interface (port)."
+    ::= { ifObjects 1 }
+
+prvtHqosIfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosIfTable."
+    INDEX       { ifIndex }
+    ::= { prvtHqosIfTable 1 }
+
+PrvtHqosIfEntry ::= SEQUENCE {
+    prvtHqosIfRowStatus             RowStatus,
+    prvtHqosIfNetworkPolicy         PrvtHqosNetPolNameOrNoneType,
+    prvtHqosIfNetQueueEgrPolicy     PrvtHqosNamedItemOrNone,
+    prvtHqosIfShaperProfile         PrvtHqosIfShaperIdOrNone
+}
+
+prvtHqosIfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this port."
+    ::= { prvtHqosIfEntry 1 }
+
+prvtHqosIfNetworkPolicy OBJECT-TYPE
+    SYNTAX      PrvtHqosNetPolNameOrNoneType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The network policy applied to the port.
+         Must be set to a zero length string or to the prvtHqosNetPolicyName of an entry
+         in prvtHqosNetPolicyTable.
+         A zero length string represents that no network policy is applied to the
+         port."
+    ::= { prvtHqosIfEntry 2 }
+
+prvtHqosIfNetQueueEgrPolicy OBJECT-TYPE
+    SYNTAX      PrvtHqosNamedItemOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The network egress queue policy applied to the port.
+         Must be set to a zero length string or to the prvtHqosNetQPolicyName of an entry
+         in prvtHqosNetQPolicyTable.
+         A zero length string represents that no network egress queue policy is
+         applied to the port."
+    ::= { prvtHqosIfEntry 3 }
+
+prvtHqosIfShaperProfile OBJECT-TYPE
+    SYNTAX      PrvtHqosIfShaperIdOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaper profile applied to the port.
+         Must be set to a value of zero or to the prvtHqosShaperIfPrfId of an entry
+         in prvtHqosShaperIfPrfTable.
+         The value of zero indicates that no shaper profile is applied to the port."
+    ::= { prvtHqosIfEntry 4 }
+
+policerObjects OBJECT IDENTIFIER
+    ::= { hqosMIBObjects 10 }
+
+prvtHqosPolicerSvcPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtHqosPolicerSvcPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Policer Profile Table
+         Each entry in this table defines a service policer profile."
+    ::= { policerObjects 1 }
+
+prvtHqosPolicerSvcPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtHqosPolicerSvcPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtHqosPolicerSvcPrfTable."
+    INDEX       { prvtHqosPolicerSvcPrfId }
+    ::= { prvtHqosPolicerSvcPrfTable 1 }
+
+PrvtHqosPolicerSvcPrfEntry ::= SEQUENCE {
+    prvtHqosPolicerSvcPrfId         PrvtHqosPolicerIdType,
+    prvtHqosPolicerSvcPrfRowStatus  RowStatus,
+    prvtHqosPolicerSvcPrfCIR        PrvtHqosRateValueNet,
+    prvtHqosPolicerSvcPrfPIR        PrvtHqosRateValueNet,
+    prvtHqosPolicerSvcPrfCBS        PrvtHqosBurstValueIntf,
+    prvtHqosPolicerSvcPrfPBS        PrvtHqosBurstValueIntf,
+    prvtHqosPolicerSvcPrfDescr      PrvtHqosDescrType
+}
+
+prvtHqosPolicerSvcPrfId OBJECT-TYPE
+    SYNTAX      PrvtHqosPolicerIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a service policer profile."
+    ::= { prvtHqosPolicerSvcPrfEntry 1 }
+
+prvtHqosPolicerSvcPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this service policer profile."
+    ::= { prvtHqosPolicerSvcPrfEntry 2 }
+
+prvtHqosPolicerSvcPrfCIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueNet
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed information rate in kbps."
+    ::= { prvtHqosPolicerSvcPrfEntry 3 }
+
+prvtHqosPolicerSvcPrfPIR OBJECT-TYPE
+    SYNTAX      PrvtHqosRateValueNet
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peak information rate allowed in kbps."
+    ::= { prvtHqosPolicerSvcPrfEntry 4 }
+
+prvtHqosPolicerSvcPrfCBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueIntf
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The committed burst size allowed in kilobytes."
+    ::= { prvtHqosPolicerSvcPrfEntry 5 }
+
+prvtHqosPolicerSvcPrfPBS OBJECT-TYPE
+    SYNTAX      PrvtHqosBurstValueIntf
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum burst size allowed in kilobytes."
+    ::= { prvtHqosPolicerSvcPrfEntry 6 }
+
+prvtHqosPolicerSvcPrfDescr OBJECT-TYPE
+    SYNTAX      PrvtHqosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-defined description for the service policer profile."
+    ::= { prvtHqosPolicerSvcPrfEntry 7 }
+
+END -- end of module PRVT-HQOS-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-IGMP-SNOOPING-MIB b/MIBS/telco-systems/binox/PRVT-IGMP-SNOOPING-MIB
new file mode 100644
index 0000000..7af98c3
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-IGMP-SNOOPING-MIB
@@ -0,0 +1,1179 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-IGMP-SNOOPING-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-IGMP-SNOOPING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtIgmpSnoopingMIB MODULE-IDENTITY
+    LAST-UPDATED "201002030000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Prvt IGMP Snooping MIB"
+    REVISION    "201002030000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 135 }
+
+
+prvtIgmpSnoopMIBObjects OBJECT IDENTIFIER
+    ::= { prvtIgmpSnoopingMIB 1 }
+
+prvtIgmpSnoopObjects OBJECT IDENTIFIER
+    ::= { prvtIgmpSnoopMIBObjects 1 }
+
+prvtIgmpSnoopCfgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing configuration required for each VLAN"
+    ::= { prvtIgmpSnoopObjects 1 }
+
+prvtIgmpSnoopCfgEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopCfgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The configuration related to a specific VLAN."
+    INDEX       { prvtIgmpSnoopCfgSvcType, prvtIgmpSnoopCfgSvcId }
+    ::= { prvtIgmpSnoopCfgTable 1 }
+
+PrvtIgmpSnoopCfgEntry ::= SEQUENCE {
+    prvtIgmpSnoopCfgSvcType             INTEGER,
+    prvtIgmpSnoopCfgSvcId               Unsigned32,
+    prvtIgmpSnoopCfgRowStatus           RowStatus,
+    prvtIgmpSnoopCfgEnable              TruthValue,
+    prvtIgmpSnoopCfgRouterAlertCheck    TruthValue,
+    prvtIgmpSnoopCfgIpTosCheck          TruthValue,
+    prvtIgmpSnoopCfgFloodOnFlush        TruthValue,
+    prvtIgmpSnoopCfgTmrRobustness       Unsigned32,
+    prvtIgmpSnoopCfgTmrQIntvl           Unsigned32,
+    prvtIgmpSnoopCfgTmrQRespIntvl       Unsigned32,
+    prvtIgmpSnoopCfgTmrLastMbrQIntvl    Unsigned32,
+    prvtIgmpSnoopCfgMode                INTEGER,
+    prvtIgmpSnoopCfgSourceAddr          IpAddress
+}
+
+prvtIgmpSnoopCfgSvcType OBJECT-TYPE
+    SYNTAX      INTEGER { vlan(1), vpls(2), dot1q(3), tls(4) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Service Type"
+    ::= { prvtIgmpSnoopCfgEntry 1 }
+
+prvtIgmpSnoopCfgSvcId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967294)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Service ID."
+    ::= { prvtIgmpSnoopCfgEntry 2 }
+
+prvtIgmpSnoopCfgRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for this VLAN."
+    ::= { prvtIgmpSnoopCfgEntry 3 }
+
+prvtIgmpSnoopCfgEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable IGMP snooping."
+    ::= { prvtIgmpSnoopCfgEntry 4 }
+
+prvtIgmpSnoopCfgRouterAlertCheck OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable checking of the router
+         alert flags and drop the packet if it is not set."
+    ::= { prvtIgmpSnoopCfgEntry 5 }
+
+prvtIgmpSnoopCfgIpTosCheck OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Check IP tos and drop the packet if it is not set"
+    ::= { prvtIgmpSnoopCfgEntry 6 }
+
+prvtIgmpSnoopCfgFloodOnFlush OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable flooding of unknown
+         multicast traffic when a VFDB flush event occurs."
+    ::= { prvtIgmpSnoopCfgEntry 7 }
+
+prvtIgmpSnoopCfgTmrRobustness OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The robustness value to use for this VLAN."
+    ::= { prvtIgmpSnoopCfgEntry 8 }
+
+prvtIgmpSnoopCfgTmrQIntvl OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1024)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The query interval to use for this VLAN ."
+    ::= { prvtIgmpSnoopCfgEntry 9 }
+
+prvtIgmpSnoopCfgTmrQRespIntvl OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1024)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The query response interval to use for this VLAN."
+    ::= { prvtIgmpSnoopCfgEntry 10 }
+
+prvtIgmpSnoopCfgTmrLastMbrQIntvl OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1024)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The last member query interval to use for this VLAN."
+    ::= { prvtIgmpSnoopCfgEntry 11 }
+
+prvtIgmpSnoopCfgMode OBJECT-TYPE
+    SYNTAX      INTEGER { transparent(0), report-suppression(1), 
+                    proxy(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure IGMP Snooping v3 operational mode"
+    ::= { prvtIgmpSnoopCfgEntry 12 }
+
+prvtIgmpSnoopCfgSourceAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify source IP address for Queries and Reports"
+    ::= { prvtIgmpSnoopCfgEntry 13 }
+
+prvtIgmpSnoopCfgIfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopCfgIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing configuration required for each interface."
+    ::= { prvtIgmpSnoopObjects 2 }
+
+prvtIgmpSnoopCfgIfEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopCfgIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The configuration related to a specific interface."
+    INDEX       { prvtIgmpSnoopCfgSvcType, prvtIgmpSnoopCfgSvcId, 
+                  prvtIgmpSnoopCfgIfType, prvtIgmpSnoopCfgIfName }
+    ::= { prvtIgmpSnoopCfgIfTable 1 }
+
+PrvtIgmpSnoopCfgIfEntry ::= SEQUENCE {
+    prvtIgmpSnoopCfgIfType              INTEGER,
+    prvtIgmpSnoopCfgIfName              OCTET STRING,
+    prvtIgmpSnoopCfgIfRowStatus         RowStatus,
+    prvtIgmpSnoopCfgIfMaxGroups         Unsigned32,
+    prvtIgmpSnoopCfgIfMRouter           TruthValue,
+    prvtIgmpSnoopCfgIfMRouterBlock      TruthValue,
+    prvtIgmpSnoopCfgIfExplctTracking    TruthValue,
+    prvtIgmpSnoopCfgIfFastLeave         TruthValue,
+    prvtIgmpSnoopCfgIfReportBlock       TruthValue,
+    prvtIgmpSnoopCfgIfForceFwd          TruthValue,
+    prvtIgmpSnoopCfgIfMrtAllowRprts     TruthValue,
+    prvtIgmpSnoopCfgIfQuerier           TruthValue
+}
+
+prvtIgmpSnoopCfgIfType OBJECT-TYPE
+    SYNTAX      INTEGER { port(1), sap(2), spoke-sdp(3), mesh-sdp(4) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface type."
+    ::= { prvtIgmpSnoopCfgIfEntry 1 }
+
+prvtIgmpSnoopCfgIfName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface name."
+    ::= { prvtIgmpSnoopCfgIfEntry 2 }
+
+prvtIgmpSnoopCfgIfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for this interface."
+    ::= { prvtIgmpSnoopCfgIfEntry 3 }
+
+prvtIgmpSnoopCfgIfMaxGroups OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..1024)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum number of groups permitted on this interface."
+    ::= { prvtIgmpSnoopCfgIfEntry 4 }
+
+prvtIgmpSnoopCfgIfMRouter OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to configure this interface as a multicast router
+         port (i.e. a port connected to a multicast router)."
+    ::= { prvtIgmpSnoopCfgIfEntry 5 }
+
+prvtIgmpSnoopCfgIfMRouterBlock OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to prevent this interface from becoming a multicast router port."
+    ::= { prvtIgmpSnoopCfgIfEntry 6 }
+
+prvtIgmpSnoopCfgIfExplctTracking OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable explicit tracking of the membership
+         of all multicast hosts."
+    ::= { prvtIgmpSnoopCfgIfEntry 7 }
+
+prvtIgmpSnoopCfgIfFastLeave OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable fast-leave mode on this interface."
+    ::= { prvtIgmpSnoopCfgIfEntry 8 }
+
+prvtIgmpSnoopCfgIfReportBlock OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Deny entry of IGMP reports to local IGMP database (disable IGMP)"
+    ::= { prvtIgmpSnoopCfgIfEntry 9 }
+
+prvtIgmpSnoopCfgIfForceFwd OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Forward IGMP control packets between Mesh SDPs/Secured SAPs"
+    ::= { prvtIgmpSnoopCfgIfEntry 10 }
+
+prvtIgmpSnoopCfgIfMrtAllowRprts OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Allow processing of Reports on MRouter port"
+    ::= { prvtIgmpSnoopCfgIfEntry 11 }
+
+prvtIgmpSnoopCfgIfQuerier OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send IGMPv2 General Query when interface becomes up."
+    ::= { prvtIgmpSnoopCfgIfEntry 12 }
+
+prvtIgmpSnoopDbGrpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopDbGrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing multicast groups."
+    ::= { prvtIgmpSnoopObjects 3 }
+
+prvtIgmpSnoopDbGrpEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopDbGrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific multicast group."
+    INDEX       { prvtIgmpSnoopDbGrpStatsVlanId, prvtIgmpSnoopCfgIfName, 
+                  prvtIgmpSnoopDbGrpIpAddr }
+    ::= { prvtIgmpSnoopDbGrpTable 1 }
+
+PrvtIgmpSnoopDbGrpEntry ::= SEQUENCE {
+    prvtIgmpSnoopDbGrpIpAddr        IpAddress,
+    prvtIgmpSnoopDbGrpBitFlags      Unsigned32,
+    prvtIgmpSnoopDbGrpFilterMode    INTEGER,
+    prvtIgmpSnoopDbGrpExpireTime    Unsigned32
+}
+
+prvtIgmpSnoopDbGrpIpAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The IP address of the multicast group."
+    ::= { prvtIgmpSnoopDbGrpEntry 1 }
+
+prvtIgmpSnoopDbGrpBitFlags OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The bit flags of this multicast group.."
+    ::= { prvtIgmpSnoopDbGrpEntry 2 }
+
+prvtIgmpSnoopDbGrpFilterMode OBJECT-TYPE
+    SYNTAX      INTEGER { include(1), exclude(2), toInclude(3), 
+                    toExclude(4), allow(5), block(6) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The IGMPv3 filter mode of this multicast group."
+    ::= { prvtIgmpSnoopDbGrpEntry 3 }
+
+prvtIgmpSnoopDbGrpExpireTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The expiry time for this multicast group."
+    ::= { prvtIgmpSnoopDbGrpEntry 4 }
+
+prvtIgmpSnoopDbGrpHostTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopDbGrpHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing the hosts belonging to multicast groups."
+    ::= { prvtIgmpSnoopObjects 4 }
+
+prvtIgmpSnoopDbGrpHostEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopDbGrpHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific host."
+    INDEX       { prvtIgmpSnoopDbGrpStatsVlanId, prvtIgmpSnoopCfgIfName, 
+                  prvtIgmpSnoopDbGrpIpAddr, 
+                  prvtIgmpSnoopDbGrpHostSourceIp }
+    ::= { prvtIgmpSnoopDbGrpHostTable 1 }
+
+PrvtIgmpSnoopDbGrpHostEntry ::= SEQUENCE {
+    prvtIgmpSnoopDbGrpHostSourceIp      IpAddress,
+    prvtIgmpSnoopDbGrpHostExpireTime    Unsigned32
+}
+
+prvtIgmpSnoopDbGrpHostSourceIp OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The source IP address of the host to which this row applies."
+    ::= { prvtIgmpSnoopDbGrpHostEntry 1 }
+
+prvtIgmpSnoopDbGrpHostExpireTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The expiry time for this host."
+    ::= { prvtIgmpSnoopDbGrpHostEntry 2 }
+
+prvtIgmpSnoopDbGrpSrcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopDbGrpSrcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing the sources of multicast groups."
+    ::= { prvtIgmpSnoopObjects 5 }
+
+prvtIgmpSnoopDbGrpSrcEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopDbGrpSrcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific source."
+    INDEX       { prvtIgmpSnoopDbGrpStatsVlanId, prvtIgmpSnoopCfgIfName, 
+                  prvtIgmpSnoopDbGrpIpAddr, prvtIgmpSnoopDbGrpSrcIpAddr }
+    ::= { prvtIgmpSnoopDbGrpSrcTable 1 }
+
+PrvtIgmpSnoopDbGrpSrcEntry ::= SEQUENCE {
+    prvtIgmpSnoopDbGrpSrcIpAddr     IpAddress,
+    prvtIgmpSnoopDbGrpSrcExpTime    Unsigned32
+}
+
+prvtIgmpSnoopDbGrpSrcIpAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The IP address of the multicast source to which this row applies."
+    ::= { prvtIgmpSnoopDbGrpSrcEntry 1 }
+
+prvtIgmpSnoopDbGrpSrcExpTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The expiry time for this multicast source."
+    ::= { prvtIgmpSnoopDbGrpSrcEntry 2 }
+
+prvtIgmpSnoopDbGrpSrcHostTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopDbGrpSrcHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing the hosts listening to each multicast source."
+    ::= { prvtIgmpSnoopObjects 6 }
+
+prvtIgmpSnoopDbGrpSrcHostEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopDbGrpSrcHostEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific host."
+    INDEX       { prvtIgmpSnoopDbGrpStatsVlanId, prvtIgmpSnoopCfgIfName, 
+                  prvtIgmpSnoopDbGrpIpAddr, prvtIgmpSnoopDbGrpSrcIpAddr, 
+                  prvtIgmpSnoopDbGrpSrcHostIp }
+    ::= { prvtIgmpSnoopDbGrpSrcHostTable 1 }
+
+PrvtIgmpSnoopDbGrpSrcHostEntry ::= SEQUENCE {
+    prvtIgmpSnoopDbGrpSrcHostIp         IpAddress,
+    prvtIgmpSnoopDbGrpSrcHostExpTime    Unsigned32
+}
+
+prvtIgmpSnoopDbGrpSrcHostIp OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The IP of the host to which this row applies."
+    ::= { prvtIgmpSnoopDbGrpSrcHostEntry 1 }
+
+prvtIgmpSnoopDbGrpSrcHostExpTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The expiry time for this host."
+    ::= { prvtIgmpSnoopDbGrpSrcHostEntry 2 }
+
+prvtIgmpSnoopDbMrtrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopDbMrtrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing information about multicast routers."
+    ::= { prvtIgmpSnoopObjects 7 }
+
+prvtIgmpSnoopDbMrtrEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopDbMrtrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific multicast router."
+    INDEX       { prvtIgmpSnoopDbGrpStatsVlanId, prvtIgmpSnoopCfgIfName, 
+                  prvtIgmpSnoopDbMrtrSrcIp }
+    ::= { prvtIgmpSnoopDbMrtrTable 1 }
+
+PrvtIgmpSnoopDbMrtrEntry ::= SEQUENCE {
+    prvtIgmpSnoopDbMrtrSrcIp    IpAddress,
+    prvtIgmpSnoopDbMrtrFlags    Unsigned32,
+    prvtIgmpSnoopDbMrtrExpTime  Unsigned32
+}
+
+prvtIgmpSnoopDbMrtrSrcIp OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The source IP address of the multicast router."
+    ::= { prvtIgmpSnoopDbMrtrEntry 1 }
+
+prvtIgmpSnoopDbMrtrFlags OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Bit flags pertaining to this multicst router."
+    ::= { prvtIgmpSnoopDbMrtrEntry 2 }
+
+prvtIgmpSnoopDbMrtrExpTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The expiry time for this multicast router."
+    ::= { prvtIgmpSnoopDbMrtrEntry 3 }
+
+prvtIgmpSnoopDbGrpStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopDbGrpStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing discarded packets for each VLAN"
+    ::= { prvtIgmpSnoopObjects 8 }
+
+prvtIgmpSnoopDbGrpStatsEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopDbGrpStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Something something"
+    INDEX       { prvtIgmpSnoopDbGrpStatsVlanId }
+    ::= { prvtIgmpSnoopDbGrpStatsTable 1 }
+
+PrvtIgmpSnoopDbGrpStatsEntry ::= SEQUENCE {
+    prvtIgmpSnoopDbGrpStatsVlanId       Integer32,
+    prvtIgmpSnoopDbGrpStatsDscPkt       Unsigned32,
+    prvtIgmpSnoopDbGrpStatsDscPktTtl    Unsigned32,
+    prvtIgmpSnoopDbGrpStatsDscPktChk    Unsigned32,
+    prvtIgmpSnoopDbGrpStatsDscPktRA     Unsigned32
+}
+
+prvtIgmpSnoopDbGrpStatsVlanId OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Vlan ID."
+    ::= { prvtIgmpSnoopDbGrpStatsEntry 1 }
+
+prvtIgmpSnoopDbGrpStatsDscPkt OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of Discarded packets."
+    ::= { prvtIgmpSnoopDbGrpStatsEntry 2 }
+
+prvtIgmpSnoopDbGrpStatsDscPktTtl OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of Discarded TTL packets."
+    ::= { prvtIgmpSnoopDbGrpStatsEntry 3 }
+
+prvtIgmpSnoopDbGrpStatsDscPktChk OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of Discarded Checksum packets."
+    ::= { prvtIgmpSnoopDbGrpStatsEntry 4 }
+
+prvtIgmpSnoopDbGrpStatsDscPktRA OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of Discarded Router Alert packets."
+    ::= { prvtIgmpSnoopDbGrpStatsEntry 5 }
+
+prvtIgmpSnoopDbIfStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopDbIfStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing statistics for each interface."
+    ::= { prvtIgmpSnoopObjects 9 }
+
+prvtIgmpSnoopDbIfStatsEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopDbIfStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific interface."
+    INDEX       { prvtIgmpSnoopDbGrpStatsVlanId, 
+                  prvtIgmpSnoopDbIfStatsIfName }
+    ::= { prvtIgmpSnoopDbIfStatsTable 1 }
+
+PrvtIgmpSnoopDbIfStatsEntry ::= SEQUENCE {
+    prvtIgmpSnoopDbIfStatsIfName        OCTET STRING,
+    prvtIgmpSnoopDbIfStatsV2Reports     Unsigned32,
+    prvtIgmpSnoopDbIfStatsV2Leaves      Unsigned32,
+    prvtIgmpSnoopDbIfStatsV3Reports     Unsigned32,
+    prvtIgmpSnoopDbIfStatsGenQueries    Unsigned32,
+    prvtIgmpSnoopDbIfStatsGrpQueries    Unsigned32,
+    prvtIgmpSnoopDbIfStatsSrcQueries    Unsigned32
+}
+
+prvtIgmpSnoopDbIfStatsIfName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface name."
+    ::= { prvtIgmpSnoopDbIfStatsEntry 1 }
+
+prvtIgmpSnoopDbIfStatsV2Reports OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of IGMP Snooping V2 reports."
+    ::= { prvtIgmpSnoopDbIfStatsEntry 2 }
+
+prvtIgmpSnoopDbIfStatsV2Leaves OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of IGMP Snooping V2 leaves."
+    ::= { prvtIgmpSnoopDbIfStatsEntry 3 }
+
+prvtIgmpSnoopDbIfStatsV3Reports OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of IGMP Snooping V3 reports."
+    ::= { prvtIgmpSnoopDbIfStatsEntry 4 }
+
+prvtIgmpSnoopDbIfStatsGenQueries OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of IGMP Snooping general queries."
+    ::= { prvtIgmpSnoopDbIfStatsEntry 5 }
+
+prvtIgmpSnoopDbIfStatsGrpQueries OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of IGMP Snooping group-specific queries."
+    ::= { prvtIgmpSnoopDbIfStatsEntry 6 }
+
+prvtIgmpSnoopDbIfStatsSrcQueries OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of IGMP Snooping group-and-source-specific queries."
+    ::= { prvtIgmpSnoopDbIfStatsEntry 7 }
+
+prvtIgmpSnoopMemoryTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopMemoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing information about IGMP Snooping memory pools."
+    ::= { prvtIgmpSnoopObjects 10 }
+
+prvtIgmpSnoopMemoryEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopMemoryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific memory pool."
+    INDEX       { prvtIgmpSnoopMemoryPoolId }
+    ::= { prvtIgmpSnoopMemoryTable 1 }
+
+PrvtIgmpSnoopMemoryEntry ::= SEQUENCE {
+    prvtIgmpSnoopMemoryPoolId           Unsigned32,
+    prvtIgmpSnoopMemoryPoolName         OCTET STRING,
+    prvtIgmpSnoopMemoryTaken            Unsigned32,
+    prvtIgmpSnoopMemoryFree             Unsigned32,
+    prvtIgmpSnoopMemoryToAllocate       Unsigned32,
+    prvtIgmpSnoopMemoryInitCount        Unsigned32,
+    prvtIgmpSnoopMemorySize             Unsigned32,
+    prvtIgmpSnoopMemoryAllAllocated     Unsigned32
+}
+
+prvtIgmpSnoopMemoryPoolId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a memory pool item."
+    ::= { prvtIgmpSnoopMemoryEntry 1 }
+
+prvtIgmpSnoopMemoryPoolName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Memory pool name."
+    ::= { prvtIgmpSnoopMemoryEntry 2 }
+
+prvtIgmpSnoopMemoryTaken OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Taken memory."
+    ::= { prvtIgmpSnoopMemoryEntry 3 }
+
+prvtIgmpSnoopMemoryFree OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Free memory."
+    ::= { prvtIgmpSnoopMemoryEntry 4 }
+
+prvtIgmpSnoopMemoryToAllocate OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Memory to allocate."
+    ::= { prvtIgmpSnoopMemoryEntry 5 }
+
+prvtIgmpSnoopMemoryInitCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Initialization count."
+    ::= { prvtIgmpSnoopMemoryEntry 6 }
+
+prvtIgmpSnoopMemorySize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Memory size."
+    ::= { prvtIgmpSnoopMemoryEntry 7 }
+
+prvtIgmpSnoopMemoryAllAllocated OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "All allocated memory."
+    ::= { prvtIgmpSnoopMemoryEntry 8 }
+
+prvtIgmpSnoopApplStatsObjects OBJECT IDENTIFIER
+    ::= { prvtIgmpSnoopObjects 11 }
+
+prvtIgmpSnoopCapturedPckts OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of captured packets."
+    ::= { prvtIgmpSnoopApplStatsObjects 1 }
+
+prvtIgmpSnoopCapturedReports OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of captured reports."
+    ::= { prvtIgmpSnoopApplStatsObjects 2 }
+
+prvtIgmpSnoopUniqueSources OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of unique sources."
+    ::= { prvtIgmpSnoopApplStatsObjects 3 }
+
+prvtIgmpSnoopUniqueGroupRecords OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of unique group records."
+    ::= { prvtIgmpSnoopApplStatsObjects 4 }
+
+prvtIgmpSnoopDuplicateSources OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of duplicate sources."
+    ::= { prvtIgmpSnoopApplStatsObjects 5 }
+
+prvtIgmpSnoopDuplicateGrpRecs OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of duplicate group records."
+    ::= { prvtIgmpSnoopApplStatsObjects 6 }
+
+prvtIgmpSnoopUniqueMacs OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of unique MACs."
+    ::= { prvtIgmpSnoopApplStatsObjects 7 }
+
+prvtIgmpSnoopDuplicateMacs OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of duplicate MACs."
+    ::= { prvtIgmpSnoopApplStatsObjects 8 }
+
+prvtIgmpSnoopUniqueHsis OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of unique HSIs."
+    ::= { prvtIgmpSnoopApplStatsObjects 9 }
+
+prvtIgmpSnoopDuplicateHsis OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of duplicate HSIs."
+    ::= { prvtIgmpSnoopApplStatsObjects 10 }
+
+prvtIgmpSnoopMvrObjects OBJECT IDENTIFIER
+    ::= { prvtIgmpSnoopMIBObjects 3 }
+
+prvtIgmpSnoopMvrShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to shutdown the multicast VLAN registration."
+    ::= { prvtIgmpSnoopMvrObjects 1 }
+
+prvtIgmpSnoopMvrMode OBJECT-TYPE
+    SYNTAX      INTEGER { static(1), dynamic(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The Multicast VLAN registration mode."
+    ::= { prvtIgmpSnoopMvrObjects 2 }
+
+prvtIgmpSnoopMvrVlan OBJECT-TYPE
+    SYNTAX      Integer32 (1..4092)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The MVR VLAN."
+    ::= { prvtIgmpSnoopMvrObjects 3 }
+
+prvtIgmpSnoopMvrSrcIp OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The MVR IP address."
+    ::= { prvtIgmpSnoopMvrObjects 4 }
+
+prvtIgmpSnoopMvrGrpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopMvrGrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing the MVR static multicast groups."
+    ::= { prvtIgmpSnoopMvrObjects 10 }
+
+prvtIgmpSnoopMvrGrpEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopMvrGrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The configuration related to a MVR multicast group."
+    INDEX       { prvtIgmpSnoopMvrGrpName }
+    ::= { prvtIgmpSnoopMvrGrpTable 1 }
+
+PrvtIgmpSnoopMvrGrpEntry ::= SEQUENCE {
+    prvtIgmpSnoopMvrGrpName         OCTET STRING,
+    prvtIgmpSnoopMvrGrpRowStatus    RowStatus
+}
+
+prvtIgmpSnoopMvrGrpName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..16))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A string uniquely identifying a MVR multicast group.
+         Acceptable characters are a-z, A-Z, 0-9, '\', ']', '^', '_'."
+    ::= { prvtIgmpSnoopMvrGrpEntry 1 }
+
+prvtIgmpSnoopMvrGrpRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for this group."
+    ::= { prvtIgmpSnoopMvrGrpEntry 2 }
+
+prvtIgmpSnoopMvrGrpAsmTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopMvrGrpAsmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing the MVR all-sources multicast groups."
+    ::= { prvtIgmpSnoopMvrObjects 11 }
+
+prvtIgmpSnoopMvrGrpAsmEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopMvrGrpAsmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The configuration related to a specific group."
+    INDEX       { prvtIgmpSnoopMvrGrpName, prvtIgmpSnoopMvrGrpAsmIndex }
+    ::= { prvtIgmpSnoopMvrGrpAsmTable 1 }
+
+PrvtIgmpSnoopMvrGrpAsmEntry ::= SEQUENCE {
+    prvtIgmpSnoopMvrGrpAsmIndex         Unsigned32,
+    prvtIgmpSnoopMvrGrpAsmRowStatus     RowStatus,
+    prvtIgmpSnoopMvrGrpAsmAddr          IpAddress,
+    prvtIgmpSnoopMvrGrpAsmCount         Unsigned32
+}
+
+prvtIgmpSnoopMvrGrpAsmIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1024)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an all-source multicast group."
+    ::= { prvtIgmpSnoopMvrGrpAsmEntry 1 }
+
+prvtIgmpSnoopMvrGrpAsmRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for this group."
+    ::= { prvtIgmpSnoopMvrGrpAsmEntry 2 }
+
+prvtIgmpSnoopMvrGrpAsmAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "In combination with prvtIgmpSnoopMvrGrpAsmCount, defines a
+         range of IP addresses belonging to the multicast group."
+    ::= { prvtIgmpSnoopMvrGrpAsmEntry 3 }
+
+prvtIgmpSnoopMvrGrpAsmCount OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..256)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "In combination with prvtIgmpSnoopMvrGrpAsmAddr, defines a
+         range of IP addresses belonging to the multicast group."
+    ::= { prvtIgmpSnoopMvrGrpAsmEntry 4 }
+
+prvtIgmpSnoopMvrGrpSsmTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopMvrGrpSsmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containg the MVR source-specific multicast groups."
+    ::= { prvtIgmpSnoopMvrObjects 12 }
+
+prvtIgmpSnoopMvrGrpSsmEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopMvrGrpSsmEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The configuration related to a specific group."
+    INDEX       { prvtIgmpSnoopMvrGrpName, prvtIgmpSnoopMvrGrpSsmIndex }
+    ::= { prvtIgmpSnoopMvrGrpSsmTable 1 }
+
+PrvtIgmpSnoopMvrGrpSsmEntry ::= SEQUENCE {
+    prvtIgmpSnoopMvrGrpSsmIndex         Unsigned32,
+    prvtIgmpSnoopMvrGrpSsmRowStatus     RowStatus,
+    prvtIgmpSnoopMvrGrpSsmAddr          IpAddress,
+    prvtIgmpSnoopMvrGrpSsmSrcList       OCTET STRING,
+    prvtIgmpSnoopMvrGrpSsmMode          INTEGER
+}
+
+prvtIgmpSnoopMvrGrpSsmIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1024)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a source-specific multicast group."
+    ::= { prvtIgmpSnoopMvrGrpSsmEntry 1 }
+
+prvtIgmpSnoopMvrGrpSsmRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for this group."
+    ::= { prvtIgmpSnoopMvrGrpSsmEntry 2 }
+
+prvtIgmpSnoopMvrGrpSsmAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The multicast IP address of this group."
+    ::= { prvtIgmpSnoopMvrGrpSsmEntry 3 }
+
+prvtIgmpSnoopMvrGrpSsmSrcList OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A list of the source IP addresses belonging to this group.
+         Entries in the list are expressed in ASCII dot-decimal notation (a.c.b.d)
+         separated from other entries by a space."
+    ::= { prvtIgmpSnoopMvrGrpSsmEntry 4 }
+
+prvtIgmpSnoopMvrGrpSsmMode OBJECT-TYPE
+    SYNTAX      INTEGER { include(1), exclude(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mode for this multicast group."
+    ::= { prvtIgmpSnoopMvrGrpSsmEntry 5 }
+
+prvtIgmpSnoopMvrPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopMvrPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing MVR port-specific configuration."
+    ::= { prvtIgmpSnoopMvrObjects 13 }
+
+prvtIgmpSnoopMvrPortEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopMvrPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The configuration related to a specific MVR port."
+    INDEX       { prvtIgmpSnoopCfgIfName }
+    ::= { prvtIgmpSnoopMvrPortTable 1 }
+
+PrvtIgmpSnoopMvrPortEntry ::= SEQUENCE {
+    prvtIgmpSnoopMvrPortRowStatus   RowStatus,
+    prvtIgmpSnoopMvrPortType        INTEGER,
+    prvtIgmpSnoopMvrPortExpTrack    TruthValue,
+    prvtIgmpSnoopMvrPortFastLeave   TruthValue
+}
+
+prvtIgmpSnoopMvrPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for this MVR port."
+    ::= { prvtIgmpSnoopMvrPortEntry 1 }
+
+prvtIgmpSnoopMvrPortType OBJECT-TYPE
+    SYNTAX      INTEGER { source(1), receiver(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The type of port."
+    ::= { prvtIgmpSnoopMvrPortEntry 2 }
+
+prvtIgmpSnoopMvrPortExpTrack OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable explicit tracking of the memberhip
+         of all multicast hosts."
+    ::= { prvtIgmpSnoopMvrPortEntry 3 }
+
+prvtIgmpSnoopMvrPortFastLeave OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable fast-leave mode."
+    ::= { prvtIgmpSnoopMvrPortEntry 4 }
+
+prvtIgmpSnoopMvrPortMcGrpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIgmpSnoopMvrPortMcGrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing the multicast groups that are to be forwarded to a port."
+    ::= { prvtIgmpSnoopMvrObjects 14 }
+
+prvtIgmpSnoopMvrPortMcGrpEntry OBJECT-TYPE
+    SYNTAX      PrvtIgmpSnoopMvrPortMcGrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A row belonging to prvtIgmpSnoopMvrPortMcGrpTable."
+    INDEX       { prvtIgmpSnoopCfgIfName, prvtIgmpSnoopMvrGrpName }
+    ::= { prvtIgmpSnoopMvrPortMcGrpTable 1 }
+
+PrvtIgmpSnoopMvrPortMcGrpEntry ::= SEQUENCE {
+    prvtIgmpSnoopMvrPortMcGrpRStatus    RowStatus
+}
+
+prvtIgmpSnoopMvrPortMcGrpRStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for this multicast group."
+    ::= { prvtIgmpSnoopMvrPortMcGrpEntry 1 }
+
+END -- end of module PRVT-IGMP-SNOOPING-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-INTERWORKING-OS-MIB b/MIBS/telco-systems/binox/PRVT-INTERWORKING-OS-MIB
new file mode 100644
index 0000000..5600d09
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-INTERWORKING-OS-MIB
@@ -0,0 +1,620 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-INTERWORKING-OS-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-INTERWORKING-OS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InetAddress, InetAddressType, InetPortNumber
+        FROM INET-ADDRESS-MIB
+    software
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    DateAndTime, DisplayString, TEXTUAL-CONVENTION, TestAndIncr
+        FROM SNMPv2-TC;
+
+prvtInterworkingOSMIB MODULE-IDENTITY
+    LAST-UPDATED "201105120000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB enables display configuration of the device OS features."
+    REVISION    "201105120000Z"
+    DESCRIPTION 
+        "Clarified behavior of prvtBootConfigUpgrade objects."
+    REVISION    "201010140000Z"
+    DESCRIPTION 
+        "Added prvtConfigFiles."
+    REVISION    "200908060000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { software 1 }
+
+
+PrvtFileLocationType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "A value that represents a type of a file location interface.
+         fileSystem(1)    -- The local file system.
+         runningBinary(2) -- The running configuration on RAM, as a binary file interface
+         runningScript(3) -- The running configuration on RAM, as a CLI-script file interface
+         techSupport(4)   -- The CLI show command output
+         tftp(5)          -- A remote file system reached by the TFTP protocol
+         ftp(6)           -- A remote file system reached by the FTP protocol."
+    SYNTAX      INTEGER { fileSystem(1), runningBinary(2), 
+                    runningScript(3), techSupport(4), tftp(5), ftp(6) }
+
+prvtInterworkingOSMIBObjects OBJECT IDENTIFIER
+    ::= { prvtInterworkingOSMIB 1 }
+
+version OBJECT IDENTIFIER
+    ::= { prvtInterworkingOSMIBObjects 1 }
+
+oSversionNumber OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object identifies version number of the OS"
+    ::= { version 1 }
+
+oSversionDate OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object identifies version date of the OS"
+    ::= { version 2 }
+
+bootVersionDate OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object identifies boot version date of the OS"
+    ::= { version 3 }
+
+management OBJECT IDENTIFIER
+    ::= { prvtInterworkingOSMIBObjects 2 }
+
+managementMisc OBJECT IDENTIFIER
+    ::= { management 1 }
+
+managementMiscReset OBJECT-TYPE
+    SYNTAX      INTEGER { noop(1), reset(2), resetToDefaults(3), 
+                    saveAndReset(4) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Physically performs a hardware reset of the unit.
+         Use with care. A reset (2) resets the unit, the
+         resetToDefaults (3) resets the configuration file
+         to factory defaults and then resets the unit, the value of
+         saveAndReset (4) saves the config and then resets the unit and
+         noop (1) does nothing.
+         A value of noop (1) is always returned
+         for a GET operation."
+    ::= { managementMisc 1 }
+
+managementMiscReload OBJECT-TYPE
+    SYNTAX      INTEGER { noop(1), saveAndReload(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Reload the unit software, the unit hardware will not
+         be affected. A value of noop (1) is always returned for a
+         GET operation."
+    ::= { managementMisc 2 }
+
+managementMiscReloadInTime OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(4))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Indicates time for scheduled reload without save in hour:min.
+         octets contents range
+         1 day 0x01..0x1f (1-31)
+         2 month 0x01..0x0C (1..12)
+         where january = 1 december = 12
+         3 hour 0x01..0x17 (0..23)
+         4 min 0x01..3B (0..59)
+         For example: 0x01 0x01 0x01 0x01 means 1 January 01:01.
+         To stop scheduled reload set it to 0x00 0x00 0x00 0x00"
+    ::= { managementMisc 3 }
+
+managementMiscReloadAtTime OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(4))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Indicates time for scheduled reload without save at day:month:hour:min.
+         octets contents range
+         1 day 0x01..0x1f (1-31)
+         2 month 0x01..0x0C (1..12)
+         where january = 1 december = 12
+         3 hour 0x01..0x17 (0..23)
+         4 min 0x01..3B (0..59)
+         For example: 0x01 0x01 0x01 0x01 means 1 January 01:01.
+         To stop scheduled reload set it to 0x00 0x00 0x00 0x00"
+    ::= { managementMisc 4 }
+
+prvtBootConfigUpgrade OBJECT IDENTIFIER
+    ::= { management 2 }
+
+prvtBootUpgradeSrcURI OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The object represents an address from where the application
+         will be copied during an upgrade process initiated using the
+         object prvtBootUpgradeCmd.
+         The address must be given in a valid URI format.
+         
+         Examples:
+         ftp://myuser:mypass@netaddress/MyApps/Imagev1.5.Z
+         tftp://netaddress/MyApps/Imagev1.5.Z"
+    REFERENCE   
+        "See rfc3986"
+    ::= { prvtBootConfigUpgrade 1 }
+
+prvtBootApplicationName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object contains the file name of the application that will
+         be loaded upon the next restart.
+         Sets to this object must be the file name of an existing OS image.
+         A list of existing OS images can be obtained by performing a walk
+         of prvtFileSystemFileName.osImage.
+         Sets with the name of a non-existing OS image will result in an
+         error response.
+         Note that no validation of the image is performed when a new image
+         is selected by writing to this object."
+    ::= { prvtBootConfigUpgrade 2 }
+
+prvtBootUpgradeCmd OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), ready(1), apply(2), applyExec(3) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This field is used to initiate an upgrade process.
+         The object prvtBootUpgradeSrcURI is to contain the source URI of where
+         to obtain the new image.
+         When a get request is executed, the returned value will be always ready.
+         When a set with the value applyExec is made to this object, the upgrade
+         process is started."
+    ::= { prvtBootConfigUpgrade 4 }
+
+prvtBootOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(0), ready(1), notReady(2), 
+                    upgradeInProgress(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The object is used to show the current status of the upgrading process. The
+         default value is ready(1), indicating that the process is idle.
+         upgradeInProgress(3) indicates an upgrade process has started and has not finished
+         yet."
+    ::= { prvtBootConfigUpgrade 5 }
+
+prvtBootErrorCondition OBJECT-TYPE
+    SYNTAX      INTEGER { noError(0), genericError(1), copyFailed(2), 
+                    downloadFailed(3), freeSpaceError(4), 
+                    validationFailed(5), backupFailed(6), 
+                    inProgressError(7), consistencyError(8), 
+                    fileSystemError(9), profileNameError(10), 
+                    profileError(11), fileNameError(12), pathError(13), 
+                    zFileError(14), cannotFindFile(15), 
+                    defApplicationProfileError(16), 
+                    configProfileError(17), bootDevProfileError(18), 
+                    ftpServerProfileError(19), ftpUserProfileError(20), 
+                    ftpPassProfileError(21) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object gives the error condition of the most recent upgrade process initiated
+         using the object prvtBootUpgradeCmd."
+    ::= { prvtBootConfigUpgrade 6 }
+
+prvtConfigFiles OBJECT IDENTIFIER
+    ::= { management 3 }
+
+prvtConfigFileAction OBJECT IDENTIFIER
+    ::= { prvtConfigFiles 1 }
+
+prvtConfigFileSource OBJECT IDENTIFIER
+    ::= { prvtConfigFileAction 1 }
+
+prvtConfigSourceType OBJECT-TYPE
+    SYNTAX      PrvtFileLocationType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The type of the location of the source file used by prvtConfigAction."
+    ::= { prvtConfigFileSource 1 }
+
+prvtConfigSourceFileName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The name of the file intended to be copied if prvtConfigAction='copy';
+         or the file whose name is to be changed if prvtConfigFileAction='rename';
+         or the file to be merged to running configuration if prvtConfigAction='merge'.
+         Otherwise, has no significance."
+    ::= { prvtConfigFileSource 2 }
+
+prvtConfigFileTarget OBJECT IDENTIFIER
+    ::= { prvtConfigFileAction 2 }
+
+prvtConfigTargetType OBJECT-TYPE
+    SYNTAX      PrvtFileLocationType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The type of the location of the destination file used by prvtConfigAction."
+    ::= { prvtConfigFileTarget 1 }
+
+prvtConfigTargetFileName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The name of the file intended to be copied to if prvtConfigAction='copy';
+         or the new file name if prvtConfigFileAction='rename'. Otherwise, has no significance."
+    ::= { prvtConfigFileTarget 2 }
+
+prvtConfigFileRemote OBJECT IDENTIFIER
+    ::= { prvtConfigFileAction 3 }
+
+prvtConfigRemoteAddressType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The address type of prvtConfigRemoteAddress.
+         Note that prvtConfigAction currently only support actions that use IPv4 address types."
+    REFERENCE   
+        "prvtConfigAction"
+    ::= { prvtConfigFileRemote 1 }
+
+prvtConfigRemoteAddress OBJECT-TYPE
+    SYNTAX      InetAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The IP address of the remote file server to use for the upload or download request."
+    REFERENCE   
+        "prvtConfigAction"
+    ::= { prvtConfigFileRemote 2 }
+
+prvtConfigRemotePort OBJECT-TYPE
+    SYNTAX      InetPortNumber
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The transport protocol port to use for the upload or download request.
+         The value '0' indicates to use the IANA default port number for the selected protocol."
+    REFERENCE   
+        "prvtConfigAction"
+    ::= { prvtConfigFileRemote 3 }
+
+prvtConfigRemoteUser OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The user name to use for the upload or download request."
+    REFERENCE   
+        "prvtConfigAction"
+    ::= { prvtConfigFileRemote 4 }
+
+prvtConfigRemotePassword OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The user password to use for the upload or download request."
+    REFERENCE   
+        "prvtConfigAction"
+    ::= { prvtConfigFileRemote 5 }
+
+prvtConfigActionSpinLock OBJECT-TYPE
+    SYNTAX      TestAndIncr
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is used to facilitate prvtConfigAction
+         sets by multiple managers, specifically sets that transitions
+         prvtConfigAction from 'idle' to 'prepare'.
+         
+         The procedure for performing this transition is as follows:
+           1. Retrieve the value of prvtConfigAction. If value is not 'idle',
+              then wait until prvtConfigAction returns to 'idle'.
+           2. Retrieve the value of prvtConfigActionSpinLock.
+           3. Within a single set request packet, set the value of prvtConfigActionSpinLock
+              to the retrieved value, and the value of prvtConfigAction to 'prepare'.
+              If the set fails for the prvtConfigActionSpinLock object, go back to step 1.
+         
+         Note that the use of the prvtConfigActionSpinLock object is optional
+         (prvtConfigAction can be set without using prvtConfigActionSpinLock)."
+    ::= { prvtConfigFileAction 4 }
+
+prvtConfigAction OBJECT-TYPE
+    SYNTAX      INTEGER { idle(1), prepare(2), copy(3), rename(4), 
+                    merge(5) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Represents a file action request to be committed immediately (with set request) or that
+         is being commited (with get request).
+         
+         idle = there is no action being performed or prepared
+         prepare = parameters of an action are being edited. This is used by the manager to
+           willingly avoid editing parameters while another manager does so.
+         copy = copy a file from source to target, where source and target have a broad meaning
+          (local/remote file system or running configuration). See details below.
+         rename = rename a local file (see details below)
+         merge = merge a local file to running configuration
+         
+         Allowed Transitions:
+         * idle to prepare
+         * prepare to any other
+         
+         Automatic Transitions:
+         * copy to idle, when action is done
+         * rename to idle, when action is done
+         * merge to idle, when action is done
+         
+         ******************************
+         *       Action = copy        *
+         ******************************
+         The following table gives the corresponding CLI command for each combination of source and target type.
+         
+         +--------------+----------------------+----------------------+---------------+----------------------+
+         |      \ Target|fileSystem            |runningBinary         |runningScript  |ftp                   |
+         |Source \      |                      |                      |               |                      |
+         +--------------+----------------------+----------------------+---------------+----------------------+
+         |fileSystem    |file cp from          |file restore          |file replace   |file cp from          |
+         |              |SRC                   |binary-running-config |SRC            |SRC                   |
+         |              |TRG                   |flash                 |               |FTP_TRG               |
+         +--------------+----------------------+----------------------+---------------+----------------------+
+         |techSupport   |file cp               |-- not legal --       |-- not legal --|file cp               |
+         |              |technical-support     |                      |               |technical-support     |
+         |              |TRG                   |                      |               |FTP_TRG               |
+         +--------------+----------------------+----------------------+---------------+----------------------+
+         |runningBinary |file backup           |-- not legal --       |-- not legal --|file backup           |
+         |              |binary-running-config |                      |               |binary-running-config |
+         |              |flash                 |                      |               |FTP_TRG               |
+         +--------------+----------------------+----------------------+---------------+----------------------+
+         |runningScript |file cp               |-- not legal --       |-- not legal --|file cp               |
+         |              |running-configuration |                      |               |running-configuration |
+         |              |TRG                   |                      |               |FTP_TRG               |
+         +--------------+----------------------+----------------------+---------------+----------------------+
+         |ftp           |file cp from          |file restore          |-- not legal --|-- not legal --       |
+         |              |FTP_SRC               |binary-running-config |               |                      |
+         |              |TRG                   |FTP_SRC               |               |                      |
+         +--------------+----------------------+----------------------+---------------+----------------------+
+         Comments:
+         (a) FTP_SRC denotes ftp://[USER[:PSW]@]ADR[:PORT]/SRC
+            FTP_TRG denotes ftp://[USER[:PSW]@]ADR[:PORT]/TRG
+         (b) SRC, TRG, USER, PSW, ADR and PORT are respectively the values of prvtConfigSourceFileName,
+            prvtConfigTargetFileName, prvtConfigRemoteUser, prvtConfigRemotePassword,
+            prvtConfigRemoteAddress and prvtConfigRemotePort.
+            When any of these are not mentioned in the command, then the value is not relevant.
+         (c) tftp is the same as ftp, except that USER, PSW are not used
+         (d) the error 'inconsistentValue' is returned for any combination marked 'not legal'
+         (e) a successful execution of a copy action when target type is 'runningBinary' (equivalent CLI
+            command is 'file restore binary-running config ...') results in a system reload
+         (f) The above comments are also applicable to the other actions explained below.
+         
+         ******************************
+         *       Action = rename      *
+         ******************************
+         equivalent to CLI command: file mv SRC TRG
+         prvtConfigTargetType and prvtConfigSourceType must equal to 'fileSystem'
+         
+         ******************************
+         *       Action = merge       *
+         ******************************
+         equivalent to CLI command: file merge SRC
+         prvtConfigSourceType must equal 'fileSystem'
+         prvtConfigTargetType must equal 'runningScript'
+         
+         ******************************
+         *       Examples             *
+         ******************************
+         [1] To save the binary of the running configuration to a remote ftp server, with default username,
+            default password, default port, IP = 10.2.144.20, and target file name 'example.bin', the
+            procedure would be (assuming that prvtConfigAction is initially in 'idle' state):
+         set prvtConfigAction <- 'prepare'
+         set prvtConfigSourceType <- 'runningBinary'
+         set prvtConfigTargetType <- 'ftp'
+         set prvtConfigTargetFileName <- 'example.bin'
+         set prvtConfigRemoteAddress  <- '10.2.144.20'
+         set prvtConfigAction <- 'copy'
+         
+         [2] To rename a file named 'first.txt' to 'second.txt', the procedure would be
+            (assuming that prvtConfigAction is initially in 'idle' state):
+         set prvtConfigAction <- 'prepare'
+         set prvtConfigSourceType <- 'fileSystem'
+         set prvtConfigTargetType <- 'fileSystem'
+         set prvtConfigSourceFileName <- 'first.txt'
+         set prvtConfigTargetFileName <- 'second.txt'
+         set prvtConfigAction <- 'rename'"
+    ::= { prvtConfigFileAction 5 }
+
+prvtFileSystem OBJECT IDENTIFIER
+    ::= { management 4 }
+
+prvtFileSystemSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The size of the file system flash."
+    ::= { prvtFileSystem 1 }
+
+prvtFileSystemUsedSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The size of the currently used part of the file system flash."
+    ::= { prvtFileSystem 2 }
+
+prvtFileSystemFreeSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The size of the currently free to use part of the file system flash."
+    ::= { prvtFileSystem 3 }
+
+prvtFileSystemFileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtFileSystemFileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table of files existing in the device's file system."
+    ::= { prvtFileSystem 4 }
+
+prvtFileSystemFileEntry OBJECT-TYPE
+    SYNTAX      PrvtFileSystemFileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry of prvtFileSystemFileTable."
+    INDEX       { prvtFileSystemFileType, prvtFileSystemFileIndex }
+    ::= { prvtFileSystemFileTable 1 }
+
+PrvtFileSystemFileEntry ::= SEQUENCE {
+    prvtFileSystemFileType      INTEGER,
+    prvtFileSystemFileIndex     Unsigned32,
+    prvtFileSystemFileCreated   DateAndTime,
+    prvtFileSystemFileSize      Unsigned32,
+    prvtFileSystemFileName      DisplayString,
+    prvtFileSystemFileDelete    DisplayString
+}
+
+prvtFileSystemFileType OBJECT-TYPE
+    SYNTAX      INTEGER { other(1), osImage(2) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The file type.
+         The value 'osImage' signals that this file is a software image
+         file for possible use by the device."
+    ::= { prvtFileSystemFileEntry 1 }
+
+prvtFileSystemFileIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index uniquely identifying a file.
+         This value does not change through-out the lifetime of a file,
+         but may change after system restarts.
+         Note that after a file has been deleted, this value may be re-used
+         by a newly created file with the same or a different file name."
+    ::= { prvtFileSystemFileEntry 2 }
+
+prvtFileSystemFileCreated OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Represents the date and time this file was created."
+    ::= { prvtFileSystemFileEntry 3 }
+
+prvtFileSystemFileSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "Bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Represents the size of this file."
+    ::= { prvtFileSystemFileEntry 4 }
+
+prvtFileSystemFileName OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Represents the name of this file."
+    ::= { prvtFileSystemFileEntry 5 }
+
+prvtFileSystemFileDelete OBJECT-TYPE
+    SYNTAX      DisplayString
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "May be used to delete a file.
+         To delete a file, this object must be set equal to the value of
+         prvtFileSystemFileName of the same row.
+         Note that some files are protected from being deleted.
+         Reads of this object always return a zero-length string."
+    ::= { prvtFileSystemFileEntry 6 }
+
+cpu OBJECT IDENTIFIER
+    ::= { prvtInterworkingOSMIBObjects 3 }
+
+cpuMonitoring OBJECT IDENTIFIER
+    ::= { cpu 1 }
+
+cpuMonitoringUtilization OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The object shows the current CPU utilization"
+    ::= { cpuMonitoring 1 }
+
+END -- end of module PRVT-INTERWORKING-OS-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-ISIS-MIB b/MIBS/telco-systems/binox/PRVT-ISIS-MIB
new file mode 100644
index 0000000..fcf5217
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-ISIS-MIB
@@ -0,0 +1,3286 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-ISIS-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-ISIS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex
+        FROM IF-MIB
+    InetAddressPrefixLength
+        FROM INET-ADDRESS-MIB
+    routingProtocols
+        FROM PRVT-SWITCH-MIB
+    Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, 
+    OBJECT-TYPE, TimeTicks, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtIsisMIB MODULE-IDENTITY
+    LAST-UPDATED "201002120000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB module for management of the IS-IS protocol."
+    REVISION    "201002120000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { routingProtocols 4 }
+
+
+PrvtIsisInetAddressType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "A value that represents a type of Internet address."
+    SYNTAX      INTEGER { unknown(0), ipv4(1), ipv6(2), ipv4z(3), 
+                    ipv6z(4), dns(5) }
+
+PrvtIsisInetAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION 
+        "An IPv4 IPv6 address depending upon the value of a
+         matching InetAddressType object.
+         An IPv4 address consiats of 4 octets in network-byte order.
+         An IPv6 address consiats of 16 octets in network-byte order"
+    SYNTAX      OCTET STRING (SIZE(4 | 16))
+
+PrvtIsisIPv4Address ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d"
+    STATUS      current
+    DESCRIPTION 
+        "An IPv4 address consisting of 4 octets in network-byte order.
+         A length of zero octets represents no IP address has been
+         assigned."
+    SYNTAX      OCTET STRING (SIZE(0 | 4))
+
+PrvtIsisIPv6Address ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2x:2x:2x:2x:2x:2x:2x:2x"
+    STATUS      current
+    DESCRIPTION 
+        "An IPv4 address consisting of 16 octets in network-byte order.
+         A length of zero octets represents no IP address has been
+         assigned."
+    SYNTAX      OCTET STRING (SIZE(0 | 16))
+
+PrvtIsisHostName ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255t"
+    STATUS      current
+    DESCRIPTION 
+        "A valid host name."
+    SYNTAX      OCTET STRING
+
+PrvtIsisAuthUserDataString ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION 
+        "Authentication user data."
+    SYNTAX      OCTET STRING
+
+PrvtIsisOSINSAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION 
+        "OSI Network Service Address, e.g. NSAP, SNPA, or Network
+         Entity Title"
+    SYNTAX      OCTET STRING (SIZE(1..20))
+
+PrvtIsisSystemID ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION 
+        "A ID for an Intermediate System. This should
+         be unique within a network, and is included
+         in all PDUs originated by an Intermediate System.
+         The protocol does not place any meanings upon
+         the bits, other than using ordering to break
+         ties in electing a Designated IS on a LAN."
+    SYNTAX      OCTET STRING
+
+PrvtIsisLinkStatePDUID ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION 
+        "A Link State PDU Identifier."
+    SYNTAX      OCTET STRING (SIZE(8))
+
+PrvtIsisAdminState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Type used in enabling and disabling a row."
+    SYNTAX      INTEGER { on(1), off(2) }
+
+PrvtIsisLSPBuffSize ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Integer sub range for maximum LSP size."
+    SYNTAX      Integer32 (512..16000)
+
+PrvtIsisLevelState ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "States of the IS-IS protocol."
+    SYNTAX      INTEGER { off(1), on(2), waiting(3), overloaded(4) }
+
+PrvtIsisDefaultMetric ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Integer sub-range for default metric for single hop.
+         ISO 10589 provides for 4 types of metric. Only the
+         'default' metric is used in practice."
+    SYNTAX      Integer32 (0..63)
+
+PrvtIsisWideMetric ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Wide Metric for IS Neighbors. ISO 10589 provides a
+         6 bit metric. Traffic Engineering extensions provide
+         24 bit metrics."
+    SYNTAX      Unsigned32 (0..16777215)
+
+PrvtIsisFullMetric ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Full Metric for IP Routes. Traffic Engineering extensions
+         provide 32 bit metrics."
+    SYNTAX      Unsigned32
+
+PrvtIsisMetricType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Is this an Internal or External Metric?"
+    SYNTAX      INTEGER { internal(1), external(2) }
+
+PrvtIsisMetricStyle ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Do we use 1195 style Metrics or wide metrics."
+    SYNTAX      INTEGER { narrow(1), wide(2), both(3) }
+
+PrvtIsisISLevel ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Identifies a level."
+    SYNTAX      INTEGER { none(0), area(1), domain(2) }
+
+PrvtIsisCircuitID ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION 
+        "ID for a circuit."
+    SYNTAX      OCTET STRING
+
+PrvtIsisISPriority ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Integer sub-range for IS-IS priority."
+    SYNTAX      Integer32 (0..127)
+
+PrvtIsisUnsigned16TC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "An Unsigned32 further restricted to 16 Bits. Note that
+         the ASN.1 BER encoding may still require 24 Bits for
+         some values."
+    SYNTAX      Unsigned32 (0..65535)
+
+PrvtIsisUnsigned16NoZeroTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Same as Unsigned16TC, except that 0 is not permitted."
+    SYNTAX      Unsigned32 (1..65535)
+
+PrvtIsisMaxAgeTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "TC for prvtIsisSysMaxAge."
+    SYNTAX      Unsigned32 (350..65535)
+
+PrvtIsisReceiveLSPBufferSizeTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "TC for prvtIsisSysReceiveLSPBufferSize"
+    SYNTAX      Unsigned32 (1492..16000)
+
+PrvtIsisUnsigned8TC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "An Unsigned32 further restricted to 8 Bits. Note that
+         the ASN.1 BER encoding may still require 16 Bits for
+         some values."
+    SYNTAX      Unsigned32 (0..255)
+
+PrvtIsisOperStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The current operational state of an IS-IS entity."
+    SYNTAX      INTEGER { operStatusUp(1), operStatusDown(2), 
+                    operStatusGoingUp(3), operStatusGoingDown(4), 
+                    operStatusActFailed(5) }
+
+PrvtIsisSysRestartType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The type of restart procedures to follow
+         when IS-IS activates."
+    SYNTAX      INTEGER { none(0), start(1), restart(2) }
+
+prvtIsisMIBObjects OBJECT IDENTIFIER
+    ::= { prvtIsisMIB 1 }
+
+prvtIsisSystem OBJECT IDENTIFIER
+    ::= { prvtIsisMIBObjects 1 }
+
+prvtIsisSysTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisSysEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The set of instances of the Integrated IS-IS
+         protocol existing on the system."
+    ::= { prvtIsisSystem 1 }
+
+prvtIsisSysEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisSysEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each row defines information specific to a single
+         instance of the IS-IS protocol existing on the system."
+    REFERENCE   
+        "{ISIS.poi cLNSISISBasic-P (1)}"
+    INDEX       { prvtIsisSysInstance }
+    ::= { prvtIsisSysTable 1 }
+
+PrvtIsisSysEntry ::= SEQUENCE {
+    prvtIsisSysInstance                 Integer32,
+    prvtIsisSysExistState               RowStatus,
+    prvtIsisSysVersion                  INTEGER,
+    prvtIsisSysType                     INTEGER,
+    prvtIsisSysID                       PrvtIsisSystemID,
+    prvtIsisSysMaxPathSplits            Integer32,
+    prvtIsisSysMaxLSPGenInt             Integer32,
+    prvtIsisSysPollESHelloRate          PrvtIsisUnsigned16NoZeroTC,
+    prvtIsisSysWaitTime                 PrvtIsisUnsigned16NoZeroTC,
+    prvtIsisSysShutdown                 TruthValue,
+    prvtIsisSysL2toL1Leaking            TruthValue,
+    prvtIsisSysMaxAge                   PrvtIsisMaxAgeTC,
+    prvtIsisSysReceiveLSPBufferSize     PrvtIsisReceiveLSPBufferSizeTC,
+    prvtIsisSysOperStatus               PrvtIsisOperStatus,
+    prvtIsisSysAllowAutoI3Config        TruthValue,
+    prvtIsisSysCalcMaxDelay             Unsigned32,
+    prvtIsisSysCalcThrshUpdStart        Unsigned32,
+    prvtIsisSysCalcThrshUpdRestart      Unsigned32,
+    prvtIsisSysCalcThrshRestartLimit    Unsigned32,
+    prvtIsisSysCalcPauseFreq            Unsigned32,
+    prvtIsisSysCheckChecksums           Unsigned32,
+    prvtIsisSysZeroAgeLifetime          Integer32,
+    prvtIsisSysNumUpdPending            Gauge32,
+    prvtIsisSysNumUpdMerged             Counter32,
+    prvtIsisSysNumCksumsPending         Gauge32,
+    prvtIsisSysTEMetricPcntge           Integer32,
+    prvtIsisSysMaxBwidthPcntge          Integer32,
+    prvtIsisSysMaxResBwidthPcntge       Integer32,
+    prvtIsisSysUnresBwidthPcntge        Integer32,
+    prvtIsisSysMaxLSPBwidthPcntge       Integer32,
+    prvtIsisSysMinLSPBwidthPcntge       Integer32,
+    prvtIsisSysMTUSizePcntge            Integer32,
+    prvtIsisSysTERouterID               IpAddress,
+    prvtIsisSysIPv6TERouterID           PrvtIsisIPv6Address,
+    prvtIsisSysMaxExternalRoutes        Unsigned32,
+    prvtIsisSysMaxExternalRoutesAct     INTEGER,
+    prvtIsisSysLspFullSuppress          INTEGER,
+    prvtIsisSysLspFullSetDBOL           TruthValue,
+    prvtIsisSysRestartHelpPeer          TruthValue,
+    prvtIsisSysRestartActivationType    PrvtIsisSysRestartType,
+    prvtIsisSysRestartAutoResetType     PrvtIsisSysRestartType,
+    prvtIsisSysRestartAdjacencyWait     Integer32,
+    prvtIsisSysMaxRecoveryTime          Integer32,
+    prvtIsisSysClearStats               TruthValue,
+    prvtIsisSysSetAttached              INTEGER,
+    prvtIsisSysProtSupported            BITS,
+    prvtIsisSysRstrctLanAdjsToSubnet    TruthValue,
+    prvtIsisSysHostName                 PrvtIsisHostName,
+    prvtIsisSysCalcSoonAfterCircChng    TruthValue,
+    prvtIsisSysSendNotifications        BITS,
+    prvtIsisSysLvl1OrigLSPBuffSize      PrvtIsisLSPBuffSize,
+    prvtIsisSysLvl1MinLSPGenInt         PrvtIsisUnsigned16NoZeroTC,
+    prvtIsisSysLvl1OverloadState        PrvtIsisLevelState,
+    prvtIsisSysLvl1SetOverload          TruthValue,
+    prvtIsisSysLvl1SetOverloadUntil     TimeTicks,
+    prvtIsisSysLvl1MetricStyle          PrvtIsisMetricStyle,
+    prvtIsisSysLvl1SPFConsiders         PrvtIsisMetricStyle,
+    prvtIsisSysLvl1TEEnabled            TruthValue,
+    prvtIsisSysLvl1IPv6TEEnabled        TruthValue,
+    prvtIsisSysLvl1RestartT2Duration    Integer32,
+    prvtIsisSysLvl1AuthUser             PrvtIsisAuthUserDataString,
+    prvtIsisSysLvl2OrigLSPBuffSize      PrvtIsisLSPBuffSize,
+    prvtIsisSysLvl2MinLSPGenInt         PrvtIsisUnsigned16NoZeroTC,
+    prvtIsisSysLvl2OverloadState        PrvtIsisLevelState,
+    prvtIsisSysLvl2SetOverload          TruthValue,
+    prvtIsisSysLvl2SetOverloadUntil     TimeTicks,
+    prvtIsisSysLvl2MetricStyle          PrvtIsisMetricStyle,
+    prvtIsisSysLvl2SPFConsiders         PrvtIsisMetricStyle,
+    prvtIsisSysLvl2TEEnabled            TruthValue,
+    prvtIsisSysLvl2IPv6TEEnabled        TruthValue,
+    prvtIsisSysLvl2RestartT2Duration    Integer32,
+    prvtIsisSysLvl2AuthUser             PrvtIsisAuthUserDataString
+}
+
+prvtIsisSysInstance OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The unique identifier of the Integrated IS-IS
+         instance to which this row corresponds."
+    ::= { prvtIsisSysEntry 1 }
+
+prvtIsisSysExistState OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The existence state (RowStatus) of the IS-IS router.
+         Setting this to state 'destroy' forces the router to
+         forget all the current configuration. Setting the
+         state to 'notInService' stops protocol processing, but
+         retains the configuration."
+    ::= { prvtIsisSysEntry 2 }
+
+prvtIsisSysVersion OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(0), one(1) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The version number of the IS-IS protocol that
+         is implemented."
+    REFERENCE   
+        "{ISIS.aoi version (1)}"
+    ::= { prvtIsisSysEntry 3 }
+
+prvtIsisSysType OBJECT-TYPE
+    SYNTAX      INTEGER { level1IS(1), level2IS(2), level1L2IS(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "At which levels is the Intermediate System
+         running? This object follows the
+         ReplaceOnlyWhileDisabled behavior."
+    REFERENCE   
+        "{ISIS.aoi iSType (2)}"
+    ::= { prvtIsisSysEntry 4 }
+
+prvtIsisSysID OBJECT-TYPE
+    SYNTAX      PrvtIsisSystemID
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ID for this instance of the Integrated IS-IS
+         protocol. This value is appended to each of the
+         area addresses to form the Network Entity Titles.
+         This value is a 6 byte MAC address.
+         
+         This object follows the ReplaceOnlyWhileDisabled
+         behavior."
+    REFERENCE   
+        "{ISIS.aoi systemId (119)}"
+    ::= { prvtIsisSysEntry 5 }
+
+prvtIsisSysMaxPathSplits OBJECT-TYPE
+    SYNTAX      Integer32 (1..32)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Maximum number of paths with equal routing metric value
+         which it is permitted to split between. This object
+         follows the ReplaceOnlyWhileDisabled behavior."
+    REFERENCE   
+        "{ISIS.aoi maximumPathSplits (3)}"
+    ::= { prvtIsisSysEntry 6 }
+
+prvtIsisSysMaxLSPGenInt OBJECT-TYPE
+    SYNTAX      Integer32 (1..65235)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Maximum interval, in seconds, between generated LSPs
+         by this instance of the protocol. This object follows
+         the ResettingTimer behavior. The value must be
+         greater than any value configured for
+         prvtIsisSysLevelxMinLSPGenInt, and should be at least 300
+         seconds less than prvtIsisSysMaxAge."
+    REFERENCE   
+        "{ISIS.aoi maximumLSPGenerationInterval (6)}"
+    ::= { prvtIsisSysEntry 7 }
+
+prvtIsisSysPollESHelloRate OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16NoZeroTC
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The value, in seconds, to be used for the suggested ES
+         configuration timer in ISH PDUs when soliciting the ES
+         configuration."
+    REFERENCE   
+        "{ISIS.aoi pollESHelloRate (13)}"
+    ::= { prvtIsisSysEntry 8 }
+
+prvtIsisSysWaitTime OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16NoZeroTC
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Number of seconds to delay in state 'waiting' before
+         entering the state 'on'. This object follows the ResettingTimer
+         behavior."
+    REFERENCE   
+        "{ISIS.aoi waitingTime (15)}"
+    ::= { prvtIsisSysEntry 9 }
+
+prvtIsisSysShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The administrative state of this instance of the
+         Integrated IS-IS protocol. Setting this object to the
+         value 'false' when its current value is 'true' enables operation
+         of this instance of the Integrated IS-IS protocol."
+    ::= { prvtIsisSysEntry 10 }
+
+prvtIsisSysL2toL1Leaking OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If true, allow the router to leak L2 routes into L1."
+    ::= { prvtIsisSysEntry 11 }
+
+prvtIsisSysMaxAge OBJECT-TYPE
+    SYNTAX      PrvtIsisMaxAgeTC
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Value to place in RemainingLifeTime field of
+         the LSPs we generate.
+         This should be at least 300 seconds greater than
+         prvtIsisSysMaxLSPGenInt."
+    ::= { prvtIsisSysEntry 12 }
+
+prvtIsisSysReceiveLSPBufferSize OBJECT-TYPE
+    SYNTAX      PrvtIsisReceiveLSPBufferSizeTC
+    UNITS       "bytes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Size of the largest buffer we are designed or
+         configured to store. This should be at least
+         as big as the maximum prvtIsisSysLevelxOrigLSPBuffSize
+         supported by the system.
+         
+         If resources allow, we will store and flood LSPs
+         larger than prvtIsisSysReceiveLSPBufferSize, as this
+         can help avoid problems in networks with different
+         values for prvtIsisSysLevelxOrigLSPBuffSize."
+    ::= { prvtIsisSysEntry 13 }
+
+prvtIsisSysOperStatus OBJECT-TYPE
+    SYNTAX      PrvtIsisOperStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current operational status of this instance of the
+         Protocol Manager component of IS-IS.
+         
+         Note that IS-IS can only activate if there is at least
+         one active entry in the prvtIsisManAreaAddrTable."
+    ::= { prvtIsisSysEntry 14 }
+
+prvtIsisSysAllowAutoI3Config OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If 'true' then add IP addresses received from the I3 stub
+         to the prvtIsisCircIPAddrTable with admin state 'on'. If
+         'false' then add them with admin state 'off'. This field
+         follows the ReplaceOnlyWhileDisabled behavior."
+    ::= { prvtIsisSysEntry 15 }
+
+prvtIsisSysCalcMaxDelay OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..120000)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum delay before the Routing Table is
+         recalculated following a change to the Link State
+         Database. (Recalculation is delayed to reduce the
+         frequency of recalculations of the Routing Table).
+         
+         This parameter has units of milliseconds. A value of
+         0 indicates that a routing calculation will
+         immediately follow an update to the database."
+    ::= { prvtIsisSysEntry 16 }
+
+prvtIsisSysCalcThrshUpdStart OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This parameter can be used to override the routing
+         calculation delay indicated by the prvtIsisSysCalcMaxDelay
+         parameter when the number of updates to the Link State
+         Database reaches a threshold value.
+         
+         This parameter specifies the threshold number of updates
+         that can be made to the Link State Database such that any
+         subsequent update to the database causes a full routing
+         calculation to start immediately.
+         
+         - 0 indicates that a routing calculation will immediately
+         follow an update to the database.
+         
+         - 0xFFFFFFFF indicates that this threshold is infinite, and
+         hence the timing of a routing calculation is determined
+         solely by the configured calculation delay."
+    ::= { prvtIsisSysEntry 17 }
+
+prvtIsisSysCalcThrshUpdRestart OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This parameter can be used to interrupt a full routing
+         calculation when the number of pending updates to the Link
+         State Database has reached a threshold value.
+         
+         This parameter specifies the threshold number of updates
+         that can be made to the Link State Database such that any
+         subsequent update to the database causes the current
+         routing calculation to be interrupted, and a new
+         calculation to start using an up to date Link State
+         Database.
+         
+         - 0 indicates that an update to the Link State Database
+         will cause any current routing calculation to be
+         interrupted and a new one to start.
+         
+         - 0xFFFFFFFF indicates that this threshold is infinite, and
+         hence no number of pending updates to the database will
+         cause a routing calculation to be interrupted."
+    ::= { prvtIsisSysEntry 18 }
+
+prvtIsisSysCalcThrshRestartLimit OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This parameter limits the number of consecutive times a
+         routing calculation can be interrupted by new updates.
+         This guarantees that the routing calculation will actually
+         complete.
+         
+         - 1 indicates that once a calculation has been interrupted
+         once, it will not be interrupted again.
+         
+         - 0xFFFFFFFF indicates that the calculation can always be
+         interrupted."
+    ::= { prvtIsisSysEntry 19 }
+
+prvtIsisSysCalcPauseFreq OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This value determines how regularly a Routing Calculation
+         is paused. It is measured in points.  The points scale
+         roughly maps to a time scale, so that the larger this value
+         is, the longer the Routing Calculation runs before pausing.
+         
+         - 0 indicates that the routing calculation is paused after
+         every calculation step.
+         
+         - 0xFFFFFFFF indicates that the Routing Calculation is
+         never paused."
+    ::= { prvtIsisSysEntry 20 }
+
+prvtIsisSysCheckChecksums OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This value determines how often the checksums of LSPs in
+         the Link State Database are checked. If 0, no checksums
+         in the database are checked."
+    ::= { prvtIsisSysEntry 21 }
+
+prvtIsisSysZeroAgeLifetime OBJECT-TYPE
+    SYNTAX      Integer32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This is the minimum amount of time in seconds for which the
+         header of an expired LSP shall be retained after it has
+         been flooded with zero Remaining Lifetime. All that is
+         required is that the header be retained until the zero
+         Remaining Lifetime LSP has been safely propagated to all
+         the neighbors."
+    ::= { prvtIsisSysEntry 22 }
+
+prvtIsisSysNumUpdPending OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of updates that are pending addition to the Link
+         State Database."
+    ::= { prvtIsisSysEntry 23 }
+
+prvtIsisSysNumUpdMerged OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of updates that have been merged into the Link
+         State Database since the last routing calculation."
+    ::= { prvtIsisSysEntry 24 }
+
+prvtIsisSysNumCksumsPending OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of LSPs in the Link State Database which are now
+         due to have their checksum checked."
+    ::= { prvtIsisSysEntry 25 }
+
+prvtIsisSysTEMetricPcntge OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Traffic Engineering metric is updated in real-time by
+         the I3 Stub. In order to increase performance and reduce
+         network traffic, this parameter determines the minimal
+         percentage change of the TE metric that causes a new LSP
+         to be originated."
+    ::= { prvtIsisSysEntry 26 }
+
+prvtIsisSysMaxBwidthPcntge OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum bandwidth on an interface is updated in
+         real-time by the I3 Stub. In order to increase performance
+         and reduce network traffic, this parameter determines the
+         minimal percentage change of maximum bandwidth that causes
+         a new LSP to be originated."
+    ::= { prvtIsisSysEntry 27 }
+
+prvtIsisSysMaxResBwidthPcntge OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum reservable bandwidth on an interface is updated
+         in real-time by the I3 Stub. In order to increase
+         performance and reduce network traffic, this parameter
+         determines the minimal percentage change of maximum
+         reservable bandwidth that causes a new LSP to be
+         originated."
+    ::= { prvtIsisSysEntry 28 }
+
+prvtIsisSysUnresBwidthPcntge OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The unreserved bandwidth on an interface is updated in
+         real-time by the I3 Stub. In order to increase performance
+         and reduce network traffic, this parameter determines the
+         minimal percentage change of unreserved bandwidth that
+         causes a new LSP to be originated."
+    ::= { prvtIsisSysEntry 29 }
+
+prvtIsisSysMaxLSPBwidthPcntge OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum LSP bandwidth for the various switching
+         descriptors on an interface is updated in real-time by the
+         I3 Stub. In order to increase performance and reduce
+         network traffic, this parameter determines the minimal
+         percentage change of maximum LSP bandwidth that causes a
+         new LSP to be originated."
+    ::= { prvtIsisSysEntry 30 }
+
+prvtIsisSysMinLSPBwidthPcntge OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The minimum LSP bandwidth for the various switching
+         descriptors on an interface is updated in real-time by the
+         I3 Stub. In order to increase performance and reduce
+         network traffic, this parameter determines the minimal
+         percentage change of minmimum LSP bandwidth that causes a
+         new LSP to be originated."
+    ::= { prvtIsisSysEntry 31 }
+
+prvtIsisSysMTUSizePcntge OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Maximum Transmission Unit size for the various
+         switching descriptors on an interface is updated in
+         real-time by the I3 Stub. In order to increase performance
+         and reduce network traffic, this parameter determines the
+         minimal percentage change of the Maximum Transmission Unit
+         that causes a new LSP to be originated."
+    ::= { prvtIsisSysEntry 32 }
+
+prvtIsisSysTERouterID OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Local IPv4 TE Router ID. This is a single stable IPv4
+         address that can always be referenced in a path that will
+         be reachable from multiple hops away, regardless of the
+         state of the node's interfaces.
+         
+         This field is ignored if prvtIsisSysLevelxTEEnabled is 'false'."
+    ::= { prvtIsisSysEntry 33 }
+
+prvtIsisSysIPv6TERouterID OBJECT-TYPE
+    SYNTAX      PrvtIsisIPv6Address
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Local IPv6 TE Router ID. This is a single stable IPv6
+         global address that can always be referenced in a path that
+         will be reachable from multiple hops away, regardless of
+         the state of the node's interfaces.
+         
+         This field is ignored if prvtIsisSysLevelxIPv6TEEnabled is
+         'false'."
+    ::= { prvtIsisSysEntry 34 }
+
+prvtIsisSysMaxExternalRoutes OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum number of static routes and routes
+         redistributed from other protocols that will be accepted.
+         
+         The action that will be taken when the maximum is
+         exceeded is controlled by prvtIsisSysMaxExternalRoutesAct.
+         
+         0xFFFFFFFF is a special value indicating that the threshold
+         is infinite."
+    ::= { prvtIsisSysEntry 35 }
+
+prvtIsisSysMaxExternalRoutesAct OBJECT-TYPE
+    SYNTAX      INTEGER { log(1), suppressExternal(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action that will be take whenn the number of
+         external routes exceeds prvtIsisSysMaxExternalRoutes.
+         
+         If set to 'log', IS-IS will alert the administrator by
+         logging that the limit has been exceeded.
+         
+         If set to 'suppressExternal', IS-IS will remove all
+         external routes from the local LSP (at all active levels)
+         in addition to logging the problem.
+         
+         In both cases, the administrator is responsible for
+         correcting the configuration to reduce the number of
+         redistributed external routes.
+         
+         In the 'suppressExternal' case, the system
+         is responsible for resynchronizing the set of routes with
+         IS-IS."
+    ::= { prvtIsisSysEntry 36 }
+
+prvtIsisSysLspFullSuppress OBJECT-TYPE
+    SYNTAX      INTEGER { external(1), none(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The set of routes (if any) that will be removed from the
+         local LSP when the local LSP becomes full at
+         either level.
+         
+         When set to 'external', all static routes and routes
+         redistributed from other protocols will be removed from the
+         local LSP (at all active levels) when the local LSP is
+         full.
+         
+         If set to 'none', IS-IS will be unable to accept any
+         additional configuration that may increase the size of the
+         local LSP.
+         
+         The system administrator should modify the system
+         configuration to reduce the local LSP size - for example,
+         by reducing the number of addresses redistributed from
+         other routing protocols, or by deleting circuit
+         configuration.
+         
+         Once this has been done, if prvtIsisSysLspFullSuppress is set
+         to 'external', the system is responsible
+         for resynchronizing the set of routes with ISIS."
+    ::= { prvtIsisSysEntry 37 }
+
+prvtIsisSysLspFullSetDBOL OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If set to 'true', the database overload flag will be set
+         in the local LSP (at all active levels) when the local
+         LSP becomes full (at either level).
+         
+         The administrator can clear the database overload flag for
+         a level by setting prvtIsisSysLevelxSetOverload to 'false' for
+         that level."
+    ::= { prvtIsisSysEntry 38 }
+
+prvtIsisSysRestartHelpPeer OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates if the procedures defined in the IS-IS restart
+         RFC (3847) for helping a peer to restart is implemented.
+         
+         Note that this object has no effect on the local restart
+         behavior, and so may be set independently of
+         prvtIsisSysRestartActivationType and
+         prvtIsisSysRestartAutoResetType."
+    ::= { prvtIsisSysEntry 39 }
+
+prvtIsisSysRestartActivationType OBJECT-TYPE
+    SYNTAX      PrvtIsisSysRestartType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is only used when IS-IS is manually activated
+         or deactivated (in other words, enters or leaves the state
+         with row status 'active' and admin status 'on'), and
+         indicates which restart procedures (if any) are followed.
+         
+         During the activation period, IS-IS will use the value
+         that was configured at the start of activation. The value
+         may be changed at any time, but the new value will only
+         take effect the next time that manual activation takes
+         place.
+         
+         During deactivation, IS-IS will purge the local LSP from
+         remote nodes if this object is set to 'none' or 'start'.
+         Setting the object to 'restart' before deactivation will
+         prevent the local LSP from being purged.
+         
+         A planned restart may be initiated by setting
+         prvtIsisSysShutdown to 'true' and later to 'false'. Graceful
+         restart procedures will only function correctly if the
+         local LSP has not been purged, and so to initiate a planned
+         restart, prvtIsisSysRestartActivationType should be set to
+         'restart' before deactivation."
+    ::= { prvtIsisSysEntry 40 }
+
+prvtIsisSysRestartAutoResetType OBJECT-TYPE
+    SYNTAX      PrvtIsisSysRestartType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "There are cases where the IS-IS protocol requires the local
+         node to automatically deactivate and later reactivate.
+         This object indicates which restart procedures (if any) are
+         followed during such an automatic reset.
+         
+         During the activation period, IS-IS will use the value
+         that was configured at the start of activation. The value
+         may be changed at any time, but the new value will only
+         take effect the next time that automatic re-activation
+         takes place."
+    ::= { prvtIsisSysEntry 41 }
+
+prvtIsisSysRestartAdjacencyWait OBJECT-TYPE
+    SYNTAX      Integer32 (1..3600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is only used when IS-IS activates with
+         the activation type (prvtIsisSysRestartActivationType or
+         prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
+         
+         It defines how long IS-IS will wait to establish
+         adjacencies before completing the start/restart.
+         
+         This object follows the ResettingTimer behavior."
+    ::= { prvtIsisSysEntry 42 }
+
+prvtIsisSysMaxRecoveryTime OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is only used when IS-IS activates with
+         the activation type (prvtIsisSysRestartActivationType or
+         prvtIsisSysRestartAutoResetType) set to 'restart'.
+         
+         It defines the maximum time that IS-IS will take before
+         completing restart procedures.
+         
+         The value specified puts an upper bound on the duration of
+         the T3 timer described in the IS-IS restart RFC (3847).
+         The actual duration of the timer is the minimum of the value
+         specified and the minimum remaining holding time received
+         on an adjacency.
+         
+         This object follows the ResettingTimer behavior."
+    ::= { prvtIsisSysEntry 43 }
+
+prvtIsisSysClearStats OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to clear all system statistics, including the
+         prvtIsisSystemCounter and prvtIsisPacketCounter tables.
+         
+         Note that prvtIsisSysStatsLSPCount is not reset by this object.
+         
+         Reading the value of this field has no meaning."
+    ::= { prvtIsisSysEntry 44 }
+
+prvtIsisSysSetAttached OBJECT-TYPE
+    SYNTAX      INTEGER { attachNoOverlapOrRedist(1), 
+                    attachNoOverlapOnly(2), attachSet(3), attachClear(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If IS-IS is operating at both level 1 and level 2, this
+         field indicates how IS-IS should decide whether to set the
+         attached bit in its level 1 LSP.
+         
+         - 'attachNoOverlapOrRedist' indicates that the attached bit
+         should be set if either of the following are true.
+         - The IS can reach at least one other area (the IS is
+         adjacent with a L2 router whose area addresses do not
+         overlap with the area addresses we know about at L1).
+         - The IS is redistributing one or more external routes
+         into the AS.
+         
+         - 'attachNoOverlapOnly' indicates that the attached bit
+         should be set only if the IS can reach at least one other
+         area.
+         
+         - 'attachSet' indicates that the attached bit should always
+         be set.
+         
+         - 'attachClear' indicates that the attached bit should
+         never be set."
+    ::= { prvtIsisSysEntry 45 }
+
+prvtIsisSysProtSupported OBJECT-TYPE
+    SYNTAX      BITS { reserved(0), ipv4(1), ipv6(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This attribute contains the set of protocols supported by
+         this Intermediate System."
+    ::= { prvtIsisSysEntry 46 }
+
+prvtIsisSysRstrctLanAdjsToSubnet OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object only affects IPv4 broadcast circuits. If this
+         is set to 'true', IS-IS will only form adjacencies with
+         intermediate systems that are on the same subnet as the
+         local circuit. This object only has effect when the I3
+         Stub is used to determine subnet addresses and is ignored
+         otherwise."
+    ::= { prvtIsisSysEntry 47 }
+
+prvtIsisSysHostName OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The string that this instance of IS-IS will use as the
+         local hostname.
+         
+         This is advertised to other Intermediate Systems in the
+         Dynamic Hostname TLV."
+    ::= { prvtIsisSysEntry 48 }
+
+prvtIsisSysCalcSoonAfterCircChng OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set this object to 'true' to minimize the delay before
+         triggering a routing calculation that includes any
+         relevant circuit change. This means a change to the local
+         neighbors (including pseudonodes), or to the reachable
+         addresses received from the I3 stub.
+         
+         There are two aspects to minimizing the delay.
+         
+         - IS-IS overrides the setting of the
+         prvtIsisSysLevelMinLSPGenInt object when such a change
+         occurs, and usually regenerates the local LSP(s)
+         immediately. The only exception is when IS-IS is
+         performing restart procedures as defined in RFC3847.
+         This RFC specifies when IS-IS can update the local
+         LSP during a restart.
+         
+         - IS-IS overrides all of the objects that affect the
+         scheduling of routing calculations, with the exception
+         of the prvtIsisSysCalcThrshRestartLimit object. It ensures
+         that a routing calculation including the updated LSPs
+         takes place as soon as possible. It abandons an
+         existing route calculation if necessary, unless more
+         than prvtIsisSysCalcThrshRestartLimit successive
+         calculations would have been interrupted."
+    ::= { prvtIsisSysEntry 49 }
+
+prvtIsisSysSendNotifications OBJECT-TYPE
+    SYNTAX      BITS { circuitIndication(0), databaseOverload(1), 
+                    manualAreaAddressDrops(2), idLengthMismatch(3), 
+                    maxAreaAddressMismatch(4), ownLspPurge(5), 
+                    areaMismatch(6), rejectedAdjacency(7), 
+                    adjacencyChange(8), lspErrorDetected(9) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This attribute contains the set of notifications generated
+         by this Intermediate System.
+         
+         The notifications that may be enabled are the prvtIsisCircIndTable,
+         prvtIsisDatabaseOverload, prvtIsisManualAddressDrops, prvtIsisIDLenMismatch,
+         prvtIsisMaxAreaAddressesMismatch, prvtIsisOwnLSPPurge, prvtIsisAreaMismatch,
+         prvtIsisRejectedAdjacency, prvtIsisAdjacencyChange and
+         prvtIsisLSPErrorDetected notifications."
+    ::= { prvtIsisSysEntry 50 }
+
+prvtIsisSysLvl1OrigLSPBuffSize OBJECT-TYPE
+    SYNTAX      PrvtIsisLSPBuffSize
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum size of LSPs and SNPs originated by
+         this Intermediate System at level 1.
+         This object follows the ReplaceOnlyWhileDisabled
+         behavior."
+    REFERENCE   
+        "{ISIS.aoi originatingL1LSPBufferSize (9)}"
+    ::= { prvtIsisSysEntry 60 }
+
+prvtIsisSysLvl1MinLSPGenInt OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16NoZeroTC
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Minimum interval, in seconds, between successive
+         generation of LSPs with the same LSPID at level 1
+         by this instance of the protocol. This object
+         follows the ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi minimumLSPGenerationInterval (11)}"
+    ::= { prvtIsisSysEntry 61 }
+
+prvtIsisSysLvl1OverloadState OBJECT-TYPE
+    SYNTAX      PrvtIsisLevelState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Overload state of the database at level 1.
+         The value 'overloaded' indicates a database that is
+         low on an essential resource, such as memory.
+         The administrator may indirectly force the state to
+         'waiting' when the router is initializing by setting
+         the object prvtIsisSysLvl1SetOverload.
+         If the state is waiting or overloaded, we
+         originate LSPs with the Overload bit set."
+    REFERENCE   
+        "{ISIS.aoi l1State (17)}"
+    ::= { prvtIsisSysEntry 62 }
+
+prvtIsisSysLvl1SetOverload OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administratively set the overload bit for the level.
+         The overload bit will continue to be set if the
+         implementation runs out of memory, independent of
+         this variable."
+    ::= { prvtIsisSysEntry 63 }
+
+prvtIsisSysLvl1SetOverloadUntil OBJECT-TYPE
+    SYNTAX      TimeTicks
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If set, the overload bit should be set, and cleared
+         after sysUpTime exceeds this value."
+    ::= { prvtIsisSysEntry 64 }
+
+prvtIsisSysLvl1MetricStyle OBJECT-TYPE
+    SYNTAX      PrvtIsisMetricStyle
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Which style of Metric do we generate in our LSPs
+         at level 1 ?"
+    ::= { prvtIsisSysEntry 65 }
+
+prvtIsisSysLvl1SPFConsiders OBJECT-TYPE
+    SYNTAX      PrvtIsisMetricStyle
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Which style of Metric do we consider in our
+         SPF computation at level 1 ?"
+    ::= { prvtIsisSysEntry 66 }
+
+prvtIsisSysLvl1TEEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Do we do Traffic Engineering for IPv4 at level 1 ?
+         
+         Currently only Traffic Engineering at L1 is supported.
+         
+         If Traffic Engineering is enabled, prvtIsisSysLvl1MetricStyle
+         must be set to 'wide' or 'both', and a value must be
+         configured for prvtIsisSysTERouterID.
+         
+         When Traffic Engineering is enabled for IPv4, this IS will
+         advertise the IPv4 TE router ID in the local LSP, and will
+         advertise traffic engineering parameters (where available)
+         for links configured to support IPv4.
+         
+         This object is ignored if the 'ipv4' bit is not set in the
+         value of prvtIsisSysProtSupported."
+    ::= { prvtIsisSysEntry 67 }
+
+prvtIsisSysLvl1IPv6TEEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Do we do Traffic Engineering for IPv6 at level 1 ?
+         
+         Currently only Traffic Engineering at L1 is supported.
+         
+         If Traffic Engineering is enabled, a value must be
+         configured for prvtIsisSysIPv6TERouterID.
+         
+         When Traffic Engineering is enabled for IPv6, this IS will
+         advertise the IPv6 TE router ID in the local LSP, and will
+         advertise traffic engineering parameters (where available)
+         for links configured to support IPv6.
+         
+         This object is ignored if the 'ipv6' bit is not set in the
+         value of prvtIsisSysProtSupported."
+    ::= { prvtIsisSysEntry 68 }
+
+prvtIsisSysLvl1RestartT2Duration OBJECT-TYPE
+    SYNTAX      Integer32 (1..3600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is only used when IS-IS activates with
+         the activation type (prvtIsisSysRestartActivationType or
+         prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
+         
+         It defines how long IS-IS will wait to complete database
+         synchronization at level 1 before completing the
+         start/restart.
+         
+         This object follows the ResettingTimer behavior."
+    ::= { prvtIsisSysEntry 69 }
+
+prvtIsisSysLvl1AuthUser OBJECT-TYPE
+    SYNTAX      PrvtIsisAuthUserDataString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Authentication user data for area/domain level
+         authentication.
+         
+         This data is passed opaquely to the authentication
+         interface where it can be used to assist with
+         authentication decisions."
+    ::= { prvtIsisSysEntry 70 }
+
+prvtIsisSysLvl2OrigLSPBuffSize OBJECT-TYPE
+    SYNTAX      PrvtIsisLSPBuffSize
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum size of LSPs and SNPs originated by
+         this Intermediate System at level 2.
+         This object follows the ReplaceOnlyWhileDisabled
+         behavior."
+    REFERENCE   
+        "{ISIS.aoi originatingL1LSPBufferSize (9)}"
+    ::= { prvtIsisSysEntry 80 }
+
+prvtIsisSysLvl2MinLSPGenInt OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16NoZeroTC
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Minimum interval, in seconds, between successive
+         generation of LSPs with the same LSPID at level 2
+         by this instance of the protocol. This object
+         follows the ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi minimumLSPGenerationInterval (11)}"
+    ::= { prvtIsisSysEntry 81 }
+
+prvtIsisSysLvl2OverloadState OBJECT-TYPE
+    SYNTAX      PrvtIsisLevelState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Overload state of the database at level 2.
+         The value 'overloaded' indicates a database that is
+         low on an essential resource, such as memory.
+         The administrator may indirectly force the state to
+         'waiting' when the router is initializing by setting
+         the object prvtIsisSysLvl2SetOverload.
+         If the state is waiting or overloaded, we
+         originate LSPs with the Overload bit set."
+    REFERENCE   
+        "{ISIS.aoi l1State (17)}"
+    ::= { prvtIsisSysEntry 82 }
+
+prvtIsisSysLvl2SetOverload OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administratively set the overload bit for the level.
+         The overload bit will continue to be set if the
+         implementation runs out of memory, independent of
+         this variable."
+    ::= { prvtIsisSysEntry 83 }
+
+prvtIsisSysLvl2SetOverloadUntil OBJECT-TYPE
+    SYNTAX      TimeTicks
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If set, the overload bit should be set, and cleared
+         after sysUpTime exceeds this value."
+    ::= { prvtIsisSysEntry 84 }
+
+prvtIsisSysLvl2MetricStyle OBJECT-TYPE
+    SYNTAX      PrvtIsisMetricStyle
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Which style of Metric do we generate in our LSPs
+         at level 2 ?"
+    ::= { prvtIsisSysEntry 85 }
+
+prvtIsisSysLvl2SPFConsiders OBJECT-TYPE
+    SYNTAX      PrvtIsisMetricStyle
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Which style of Metric do we consider in our
+         SPF computation at level 2 ?"
+    ::= { prvtIsisSysEntry 86 }
+
+prvtIsisSysLvl2TEEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Do we do Traffic Engineering for IPv4 at level 2 ?
+         
+         Currently only Traffic Engineering at L1 is supported.
+         
+         If Traffic Engineering is enabled, prvtIsisSysLvl2MetricStyle
+         must be set to 'wide' or 'both', and a value must be
+         configured for prvtIsisSysTERouterID.
+         
+         When Traffic Engineering is enabled for IPv4, this IS will
+         advertise the IPv4 TE router ID in the local LSP, and will
+         advertise traffic engineering parameters (where available)
+         for links configured to support IPv4.
+         
+         This object is ignored if the 'ipv4' bit is not set in the
+         value of prvtIsisSysProtSupported."
+    ::= { prvtIsisSysEntry 87 }
+
+prvtIsisSysLvl2IPv6TEEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Do we do Traffic Engineering for IPv6 at level 2 ?
+         
+         Currently only Traffic Engineering at L1 is supported.
+         
+         If Traffic Engineering is enabled, a value must be
+         configured for prvtIsisSysIPv6TERouterID.
+         
+         When Traffic Engineering is enabled for IPv6, this IS will
+         advertise the IPv6 TE router ID in the local LSP, and will
+         advertise traffic engineering parameters (where available)
+         for links configured to support IPv6.
+         
+         This object is ignored if the 'ipv6' bit is not set in the
+         value of prvtIsisSysProtSupported."
+    ::= { prvtIsisSysEntry 88 }
+
+prvtIsisSysLvl2RestartT2Duration OBJECT-TYPE
+    SYNTAX      Integer32 (1..3600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is only used when IS-IS activates with
+         the activation type (prvtIsisSysRestartActivationType or
+         prvtIsisSysRestartAutoResetType) set to 'start' or 'restart'.
+         
+         It defines how long IS-IS will wait to complete database
+         synchronization at level 2 before completing the
+         start/restart.
+         
+         This object follows the ResettingTimer behavior."
+    ::= { prvtIsisSysEntry 89 }
+
+prvtIsisSysLvl2AuthUser OBJECT-TYPE
+    SYNTAX      PrvtIsisAuthUserDataString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Authentication user data for area/domain level
+         authentication.
+         
+         This data is passed opaquely to the authentication
+         interface where it can be used to assist with
+         authentication decisions."
+    ::= { prvtIsisSysEntry 90 }
+
+prvtIsisManAreaAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisManAreaAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The set of manual area addresses configured on this
+         Intermediate System."
+    REFERENCE   
+        "{ISIS.aoi manualAreaAddresses (10)}"
+    ::= { prvtIsisSystem 2 }
+
+prvtIsisManAreaAddrEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisManAreaAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry contains one area address manually configured
+         on this system"
+    INDEX       { prvtIsisSysInstance, prvtIsisManAreaAddr }
+    ::= { prvtIsisManAreaAddrTable 1 }
+
+PrvtIsisManAreaAddrEntry ::= SEQUENCE {
+    prvtIsisManAreaAddr             PrvtIsisOSINSAddress,
+    prvtIsisManAreaAddrExistState   RowStatus
+}
+
+prvtIsisManAreaAddr OBJECT-TYPE
+    SYNTAX      PrvtIsisOSINSAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A manually configured area address for this system. This
+         object follows the index behavior.
+         The area address must have a non-zero length."
+    ::= { prvtIsisManAreaAddrEntry 1 }
+
+prvtIsisManAreaAddrExistState OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The existence state (RowStatus) of the prvtIsisManAreaAddrEntry"
+    ::= { prvtIsisManAreaAddrEntry 2 }
+
+prvtIsisAreaAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisAreaAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The union of the sets of area addresses reported in all
+         Level 1 LSPs with segment number zero received by this
+         instance of the protocol from Intermediate Systems which
+         are reachable via Level 1 routing."
+    REFERENCE   
+        "{ISIS.aoi areaAddresses (18)}"
+    ::= { prvtIsisSystem 3 }
+
+prvtIsisAreaAddrEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisAreaAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry contains one area address reported in a
+         Level 1 LSP received by this instance of the IS-IS
+         protocol.
+         
+         Received area addresses with a length of zero are
+         ignored."
+    INDEX       { prvtIsisSysInstance, prvtIsisAreaAddr }
+    ::= { prvtIsisAreaAddrTable 1 }
+
+PrvtIsisAreaAddrEntry ::= SEQUENCE {
+    prvtIsisAreaAddr        PrvtIsisOSINSAddress,
+    prvtIsisAreaAddrInLSP   TruthValue
+}
+
+prvtIsisAreaAddr OBJECT-TYPE
+    SYNTAX      PrvtIsisOSINSAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An area address reported in a Level 1 LSP received by
+         this instance of the IS-IS protocol.
+         
+         Received area addresses with a length of zero are
+         ignored."
+    ::= { prvtIsisAreaAddrEntry 1 }
+
+prvtIsisAreaAddrInLSP OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Following ISO10589 section 7.1.5, we advertise the three
+         numerically lowest level 1 area addresses in the level 2
+         LSP fragment zero.
+         
+         If 'true', then this area address is one of the three
+         numerically lowest area addresses, and if this router is
+         active at level 2, it is therefore one of those area
+         addresses advertised in the level 2 LSP fragment 0."
+    ::= { prvtIsisAreaAddrEntry 2 }
+
+prvtIsisSummAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisSummAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The set of IP summary addresses to use in forming
+         summary TLVs originated by this Intermediate System.
+         
+         An administrator may use a summary address to combine
+         and modify IP Reachability announcements. If the
+         Intermediate system can reach any subset of the summary
+         address, the summary address will be announced instead,
+         at the configured metric."
+    ::= { prvtIsisSystem 5 }
+
+prvtIsisSummAddrEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisSummAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry contains one IP summary address."
+    INDEX       { prvtIsisSysInstance, prvtIsisSummAddress }
+    ::= { prvtIsisSummAddrTable 1 }
+
+PrvtIsisSummAddrEntry ::= SEQUENCE {
+    prvtIsisSummAddress         OCTET STRING,
+    prvtIsisSummAddrExistState  RowStatus,
+    prvtIsisSummAddrMetric      PrvtIsisDefaultMetric,
+    prvtIsisSummAddrFullMetric  PrvtIsisFullMetric
+}
+
+prvtIsisSummAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(5))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The IP address and prefix length value for this summary address."
+    ::= { prvtIsisSummAddrEntry 2 }
+
+prvtIsisSummAddrExistState OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The existence state (RowStatus) of this summary address."
+    ::= { prvtIsisSummAddrEntry 4 }
+
+prvtIsisSummAddrMetric OBJECT-TYPE
+    SYNTAX      PrvtIsisDefaultMetric
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The metric value to announce this summary
+         address within LSPs generated by this system."
+    ::= { prvtIsisSummAddrEntry 5 }
+
+prvtIsisSummAddrFullMetric OBJECT-TYPE
+    SYNTAX      PrvtIsisFullMetric
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The wide metric value to announce this summary
+         address within LSPs generated by this system."
+    ::= { prvtIsisSummAddrEntry 6 }
+
+prvtIsisRedistributeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisRedistributeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table represents the routing protocols redistributed into
+         the IS-IS routing domain.
+         
+         Creation of conceptual row in the table starts the redistribution of the
+         specified protocol, which would lead to the injection of routing information
+         from that protocol into IS-IS.
+         
+         Deletion of conceptual row would stop the redistribution of that protocol
+         into the IS-IS."
+    ::= { prvtIsisSystem 10 }
+
+prvtIsisRedistributeEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisRedistributeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry into the prvtIsisRedistributeTable."
+    INDEX       { prvtIsisSysInstance, prvtIsisRedistributeProtocol }
+    ::= { prvtIsisRedistributeTable 1 }
+
+PrvtIsisRedistributeEntry ::= SEQUENCE {
+    prvtIsisRedistributeProtocol    INTEGER,
+    prvtIsisRedistributeRowStatus   RowStatus,
+    prvtIsisRedistributeLevel       INTEGER,
+    prvtIsisRedistributeMetric      Integer32
+}
+
+prvtIsisRedistributeProtocol OBJECT-TYPE
+    SYNTAX      INTEGER { kernel(2), connect(3), static(4), default(17) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The specific routes redistributed into IS-IS."
+    ::= { prvtIsisRedistributeEntry 1 }
+
+prvtIsisRedistributeRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the status of the row.
+         
+         Setting of this field to active enables the redistribution of the protocol.
+         Setting this field to destroy disables the redistribution of the protocol."
+    ::= { prvtIsisRedistributeEntry 2 }
+
+prvtIsisRedistributeLevel OBJECT-TYPE
+    SYNTAX      INTEGER { level1(1), level2(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The IS-IS level at which this row applies to."
+    ::= { prvtIsisRedistributeEntry 3 }
+
+prvtIsisRedistributeMetric OBJECT-TYPE
+    SYNTAX      Integer32 (0..63)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The IS-IS protocol metric to assign to the redistributed route."
+    ::= { prvtIsisRedistributeEntry 4 }
+
+prvtIsisCirc OBJECT IDENTIFIER
+    ::= { prvtIsisMIBObjects 3 }
+
+prvtIsisCircTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisCircEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of circuits used by each instance of
+         Integrated IS-IS on this system."
+    ::= { prvtIsisCirc 2 }
+
+prvtIsisCircEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisCircEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An prvtIsisCircEntry exists for each circuit used by
+         Integrated IS-IS on this system."
+    INDEX       { prvtIsisSysInstance, prvtIsisCircIfIndex }
+    ::= { prvtIsisCircTable 1 }
+
+PrvtIsisCircEntry ::= SEQUENCE {
+    prvtIsisCircIfIndex                 InterfaceIndex,
+    prvtIsisCircExistState              RowStatus,
+    prvtIsisCircIfSubIndex              Integer32,
+    prvtIsisCircShutdown                TruthValue,
+    prvtIsisCircType                    INTEGER,
+    prvtIsisCircExtDomain               TruthValue,
+    prvtIsisCircLevel                   INTEGER,
+    prvtIsisCircPassiveCircuit          TruthValue,
+    prvtIsisCircMeshGroupEnabled        INTEGER,
+    prvtIsisCircMeshGroup               Unsigned32,
+    prvtIsisCircSmallHellos             TruthValue,
+    prvtIsisCircLastUpTime              TimeTicks,
+    prvtIsisCirc3WayEnabled             TruthValue,
+    prvtIsisCircExtendedCircID          Unsigned32,
+    prvtIsisCircOperState               PrvtIsisOperStatus,
+    prvtIsisCircSdEntityIndex           Integer32,
+    prvtIsisCircDlBuffPoolSize          Unsigned32,
+    prvtIsisCircSdPDUBuffPoolSize       Unsigned32,
+    prvtIsisCircSdIndBuffPoolSize       Unsigned32,
+    prvtIsisCircDataLinkBlockSize       Unsigned32,
+    prvtIsisCircPhysicalAddress         OCTET STRING,
+    prvtIsisCircManualOrAutomatic       INTEGER,
+    prvtIsisCircT1TimerRunning          TruthValue,
+    prvtIsisCircProtSupported           BITS,
+    prvtIsisCircPtToPtOverLAN           TruthValue,
+    prvtIsisCircLvl1Metric              PrvtIsisDefaultMetric,
+    prvtIsisCircLvl1WideMetric          PrvtIsisWideMetric,
+    prvtIsisCircLvl1ISPriority          PrvtIsisISPriority,
+    prvtIsisCircLvl1IDOctet             Integer32,
+    prvtIsisCircLvl1ID                  PrvtIsisCircuitID,
+    prvtIsisCircLvl1DesIS               PrvtIsisCircuitID,
+    prvtIsisCircLvl1HelloMultiplier     Integer32,
+    prvtIsisCircLvl1HelloTimer          Integer32,
+    prvtIsisCircLvl1DRHelloTimer        Integer32,
+    prvtIsisCircLvl1LSPThrottle         PrvtIsisUnsigned16NoZeroTC,
+    prvtIsisCircLvl1MinLSPRetransInt    Integer32,
+    prvtIsisCircLvl1CSNPInterval        Integer32,
+    prvtIsisCircLvl1PartSNPInterval     Integer32,
+    prvtIsisCircLvl1StickyDIS           Integer32,
+    prvtIsisCircLvl1AuthUser            PrvtIsisAuthUserDataString,
+    prvtIsisCircLvl1IDHostname          PrvtIsisHostName,
+    prvtIsisCircLvl1DesISHostname       PrvtIsisHostName,
+    prvtIsisCircLvl2Metric              PrvtIsisDefaultMetric,
+    prvtIsisCircLvl2WideMetric          PrvtIsisWideMetric,
+    prvtIsisCircLvl2ISPriority          PrvtIsisISPriority,
+    prvtIsisCircLvl2IDOctet             Integer32,
+    prvtIsisCircLvl2ID                  PrvtIsisCircuitID,
+    prvtIsisCircLvl2DesIS               PrvtIsisCircuitID,
+    prvtIsisCircLvl2HelloMultiplier     Integer32,
+    prvtIsisCircLvl2HelloTimer          Integer32,
+    prvtIsisCircLvl2DRHelloTimer        Integer32,
+    prvtIsisCircLvl2LSPThrottle         PrvtIsisUnsigned16NoZeroTC,
+    prvtIsisCircLvl2MinLSPRetransInt    Integer32,
+    prvtIsisCircLvl2CSNPInterval        Integer32,
+    prvtIsisCircLvl2PartSNPInterval     Integer32,
+    prvtIsisCircLvl2StickyDIS           Integer32,
+    prvtIsisCircLvl2IDHostname          PrvtIsisHostName,
+    prvtIsisCircLvl2DesISHostname       PrvtIsisHostName
+}
+
+prvtIsisCircIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The value of ifIndex for the interface to which this
+         circuit corresponds. This object cannot be modified
+         after creation.
+         
+         This is also used as the 3-way circuit ID on
+         point-to-point circuits."
+    ::= { prvtIsisCircEntry 2 }
+
+prvtIsisCircExistState OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The existence state (RowStatus) of this circuit. Setting the
+         state to 'notInService' halts the generation and processing of
+         IS-IS protocol PDUs on this circuit. Setting the state
+         to destroy will also erase any configuration associated
+         with the circuit.
+         
+         Automatic circuits from the I3 stub appear as
+         passive circuits with existence state 'active'. These
+         circuits can be configured via the MIB like manual
+         circuits, except that they will survive a Destroy request,
+         with all fields reset to their automatic values.
+         
+         MIB configuration overrides automatic configuration."
+    ::= { prvtIsisCircEntry 3 }
+
+prvtIsisCircIfSubIndex OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A specifier for the part of the interface ifIndex to which
+         this circuit corresponds, such as a DLCI or VPI/VCI.
+         This object cannot be modified after creation.
+         
+         This field is currently ignored."
+    ::= { prvtIsisCircEntry 4 }
+
+prvtIsisCircShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The administrative state of the circuit."
+    ::= { prvtIsisCircEntry 5 }
+
+prvtIsisCircType OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(0), broadcast(1), ptToPt(2), 
+                    staticIn(3), staticOut(4), dA(5) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The type of the circuit. This object follows the
+         ReplaceOnlyWhileDisabled behavior. The type specified
+         must be compatible with the type of the interface defined
+         by the value of prvtIsisCircIfIndex.
+         
+         Only 'broadcast' and 'ptToPt' circuits are currently
+         supported. An automatic circuit can have type 'unknown'
+         until the correct MIB type is defined."
+    REFERENCE   
+        "{ISIS.aoi type (33)}"
+    ::= { prvtIsisCircEntry 6 }
+
+prvtIsisCircExtDomain OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If true, suppress normal transmission of and
+         interpretation of Intra-domain IS-IS PDUs on this
+         circuit."
+    REFERENCE   
+        "{ISIS.aoi externalDomain (46)}"
+    ::= { prvtIsisCircEntry 7 }
+
+prvtIsisCircLevel OBJECT-TYPE
+    SYNTAX      INTEGER { level1(1), level2(2), level1L2(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates which type of packets will be sent and
+         accepted on this circuit. The values used will be
+         modified by the settings of prvtIsisSysType. This
+         object follows the ReplaceOnlyWhileDisabled behavior."
+    ::= { prvtIsisCircEntry 8 }
+
+prvtIsisCircPassiveCircuit OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Should we include this interface in LSPs, even if
+         it is not running the IS-IS Protocol?
+         
+         Circuits with prvtIsisCircExtDomain 'true'
+         will only be included in LSPs if this field is
+         also 'true', and the circuit is active."
+    ::= { prvtIsisCircEntry 9 }
+
+prvtIsisCircMeshGroupEnabled OBJECT-TYPE
+    SYNTAX      INTEGER { inactive(1), blocked(2), set(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Is this port a member of a mesh group, or blocked?
+         Circuits in the same mesh group act as a virtual
+         multiaccess network. LSPs seen on one circuit in
+         a mesh group will not be flooded to another circuit
+         in the same mesh group."
+    REFERENCE   
+        "{ RFC 2973 }"
+    ::= { prvtIsisCircEntry 10 }
+
+prvtIsisCircMeshGroup OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Circuits in the same mesh group act as a virtual
+         multiaccess network. LSPs seen on one circuit in
+         a mesh group will not be flooded to another circuit
+         in the same mesh group. If prvtIsisCircMeshGroupEnabled
+         is inactive or blocked, this value is ignored."
+    REFERENCE   
+        "{ RFC 2973 }"
+    ::= { prvtIsisCircEntry 11 }
+
+prvtIsisCircSmallHellos OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Can we send unpadded hellos on LAN circuits? False
+         means LAN Hellos must be padded.
+         
+         Currently only unpadded hellos are supported."
+    ::= { prvtIsisCircEntry 12 }
+
+prvtIsisCircLastUpTime OBJECT-TYPE
+    SYNTAX      TimeTicks
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "If the circuit is enabled, the value of sysUpTime
+         when prvtIsisCircShutdown most recently entered
+         the state on. If the circuit is not on,
+         the value of sysUpTime when the circuit last
+         entered state on, 0 if the circuit has never
+         been on."
+    ::= { prvtIsisCircEntry 13 }
+
+prvtIsisCirc3WayEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Is this circuit enabled to run 3Way handshake?
+         
+         Currently the 3-way handshake on point to
+         point circuits is always run."
+    ::= { prvtIsisCircEntry 14 }
+
+prvtIsisCircExtendedCircID OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value to be used as the extended circuit ID in
+         3Way handshake. This value is only used if
+         prvtIsisCirc3WayEnabled is true, and must be unique across
+         all circuits on this IS.
+         
+         Currently the value for prvtIsisCircIfIndex is used as the extended
+         circuit ID."
+    ::= { prvtIsisCircEntry 15 }
+
+prvtIsisCircOperState OBJECT-TYPE
+    SYNTAX      PrvtIsisOperStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational state of this circuit."
+    ::= { prvtIsisCircEntry 16 }
+
+prvtIsisCircSdEntityIndex OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Identifies the SDC entity which will handle this circuit.
+         This object must be specified before the circuit can run the
+         IS-IS protocol. It cannot be changed after it has been
+         specified."
+    ::= { prvtIsisCircEntry 17 }
+
+prvtIsisCircDlBuffPoolSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Capacity of the buffer pool used by the DL stub to send
+         data signals to the SDC. This object follows the
+         ReplaceOnlyWhileDisabled behavior."
+    ::= { prvtIsisCircEntry 18 }
+
+prvtIsisCircSdPDUBuffPoolSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Capacity of the buffer pool into which SDC transfers data
+         signals from the DL Stub. This object follows the
+         ReplaceOnlyWhileDisabled behavior."
+    ::= { prvtIsisCircEntry 19 }
+
+prvtIsisCircSdIndBuffPoolSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Capacity of the buffer pool used by SDC to send
+         indications to PM. This object follows the
+         ReplaceOnlyWhileDisabled behavior."
+    ::= { prvtIsisCircEntry 20 }
+
+prvtIsisCircDataLinkBlockSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Maximum size of PDU that can be sent or received over this
+         circuit (MTU). This object follows the
+         ReplaceOnlyWhileDisabled behavior."
+    ::= { prvtIsisCircEntry 21 }
+
+prvtIsisCircPhysicalAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The physical address of the network interface (for example
+         a MAC address on an Ethernet card). This value is only
+         relevant to a broadcast circuit and is ignored on a
+         point-to-point circuit. It needs to be specified in the
+         MIB if the information is not obtained from the I3 stub.
+         
+         This object follows the ReplaceOnlyWhileDisabled behavior."
+    ::= { prvtIsisCircEntry 22 }
+
+prvtIsisCircManualOrAutomatic OBJECT-TYPE
+    SYNTAX      INTEGER { manual(1), automatic(2), both(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Has this circuit been configured by MIB (manual), I3
+         information (automatic) or both? MIB configuration
+         overrides I3 configuration.
+         
+         Automatic circuits cannot be destroyed. Destroying a
+         manual circuit removes all configuration for that circuit.
+         Destroying a circuit in state 'both'
+         destroys any MIB configuration and returns the circuit to
+         automatic state."
+    ::= { prvtIsisCircEntry 23 }
+
+prvtIsisCircT1TimerRunning OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Is the T1 timer running on this circuit?
+         
+         This object is only valid on a circuit that is currently
+         running the IS-IS protocol (prvtIsisCircExtDomain is 'false'
+         and prvtIsisCircOperState is 'operStatusUp').
+         
+         When set to 'true', this indicates that the local node is
+         running starting or restarting node procedures."
+    ::= { prvtIsisCircEntry 24 }
+
+prvtIsisCircProtSupported OBJECT-TYPE
+    SYNTAX      BITS { reserved(0), ipv4(1), ipv6(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Which protocols are supported on this circuit?
+         
+         Note that the configured value is used in conjunction with
+         the value of prvtIsisSysProtSupported. In particular:
+         
+         - IPv4 is supported on the circuit if both
+         prvtIsisSysProtSupported and this object have the 'ipv4' bit
+         set.
+         
+         - IPv6 is supported on the circuit if both
+         prvtIsisSysProtSupported and this object have the 'ipv6' bit
+         set."
+    ::= { prvtIsisCircEntry 25 }
+
+prvtIsisCircPtToPtOverLAN OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Allows a broadcast circuit to be configured to operate
+         point-to-point over LAN procedures.
+         
+         This is used in conjunction with the prvtIsisCircType object
+         as follows.
+         
+         - If prvtIsisCircType = 'ptToPt', the circuit is a standard
+         point-point circuit, and prvtIsisCircPtToPtOverLAN is
+         ignored.
+         
+         - If prvtIsisCircType = 'broadcast' and prvtIsisCircPtToPtOverLAN
+         is 'false', the circuit is used as a normal LAN.
+         
+         - If prvtIsisCircType = 'broadcast' and prvtIsisCircPtToPtOverLAN
+         is 'true', point-point over LAN procedures are
+         followed.
+         
+         Point-to-point over LAN procedures should only be
+         configured when there are just two Intermediate Systems
+         operating on the LAN.
+         
+         This object follows the ReplaceOnlyWhileDisabled behavior."
+    ::= { prvtIsisCircEntry 26 }
+
+prvtIsisCircLvl1Metric OBJECT-TYPE
+    SYNTAX      PrvtIsisDefaultMetric
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The metric value of this circuit for level 1."
+    REFERENCE   
+        "{ISIS.aoi l1DefaultMetric (35)}"
+    ::= { prvtIsisCircEntry 30 }
+
+prvtIsisCircLvl1WideMetric OBJECT-TYPE
+    SYNTAX      PrvtIsisWideMetric
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The wide metric value of this circuit for level 1."
+    ::= { prvtIsisCircEntry 31 }
+
+prvtIsisCircLvl1ISPriority OBJECT-TYPE
+    SYNTAX      PrvtIsisISPriority
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The priority for becoming the LAN-Designated
+         Intermediate System at level 1."
+    REFERENCE   
+        "{ISIS.aoi l2IntermediateSystemPriority (73)}"
+    ::= { prvtIsisCircEntry 32 }
+
+prvtIsisCircLvl1IDOctet OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A one byte identifier for the circuit selected by the
+         Intermediate System.
+         
+         On point-to-point circuits, the value is used as the Local
+         Circuit ID in point-to-point IIH PDUs transmitted on this
+         circuit. In this case, values of prvtIsisCircLvl1IDOctet do
+         not need to be unique.
+         
+         For broadcast circuits, the value is used to generate the
+         LAN ID that will be used if this Intermediate System is
+         elected as the Designated IS on this circuit. The value
+         is required to differ on LANs where the Intermediate System
+         is the Designated Intermediate System."
+    ::= { prvtIsisCircEntry 33 }
+
+prvtIsisCircLvl1ID OBJECT-TYPE
+    SYNTAX      PrvtIsisCircuitID
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "On a point to point circuit with a fully initialized
+         adjacency to a peer IS, the value of this object is
+         the circuit ID negotiated during adjacency initialization.
+         On a point to point circuit without such an adjacency,
+         the value is the concatenation of the local system ID
+         and the one byte prvtIsisCircLvl1IDOctet for this circuit
+         i.e. the value that would be proposed for the circuit ID.
+         
+         On other circuit types, the value returned is the zero
+         length OCTET STRING."
+    REFERENCE   
+        "{ISIS.aoi ptPtCircuitID (51)}"
+    ::= { prvtIsisCircEntry 34 }
+
+prvtIsisCircLvl1DesIS OBJECT-TYPE
+    SYNTAX      PrvtIsisCircuitID
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The ID of the LAN-Designated Intermediate System
+         on this circuit at level 1. If, for any reason,
+         this system is not partaking in the relevant
+         Designated Intermediate System election process,
+         then the value returned is the zero length OCTET STRING."
+    REFERENCE   
+        "{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
+    ::= { prvtIsisCircEntry 35 }
+
+prvtIsisCircLvl1HelloMultiplier OBJECT-TYPE
+    SYNTAX      Integer32 (2..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This value is multiplied by the corresponding HelloTimer
+         and the result in seconds (rounded up) is used as the
+         holding time in transmitted hellos, to be used by
+         receivers of hello packets from this IS."
+    REFERENCE   
+        "{ISIS.aoi iSISHelloTimer (45)}"
+    ::= { prvtIsisCircEntry 36 }
+
+prvtIsisCircLvl1HelloTimer OBJECT-TYPE
+    SYNTAX      Integer32 (10..600000)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Maximum period, in milliseconds, between IIH PDUs
+         on multiaccess networks at level 1 for LANs.
+         The value at L1 is used as the period between
+         Hellos on L1L2 point to point circuits. Setting
+         this value at level 2 on an L1L2 point to point
+         circuit will result in an error of InconsistentValue.
+         
+         This object follows the ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi iSISHelloTimer (45)}"
+    ::= { prvtIsisCircEntry 37 }
+
+prvtIsisCircLvl1DRHelloTimer OBJECT-TYPE
+    SYNTAX      Integer32 (10..120000)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Period, in milliseconds, between Hello PDUs on
+         multiaccess networks when this IS is the Designated
+         Intermediate System. This object follows the
+         ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi iSISHelloTimer (45)}"
+    ::= { prvtIsisCircEntry 38 }
+
+prvtIsisCircLvl1LSPThrottle OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16NoZeroTC
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Minimal interval of time, in milliseconds, between
+         transmissions of LSPs on an interface at level 1."
+    REFERENCE   
+        "{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
+    ::= { prvtIsisCircEntry 39 }
+
+prvtIsisCircLvl1MinLSPRetransInt OBJECT-TYPE
+    SYNTAX      Integer32 (1..300)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Minimum interval, in seconds, between re-transmission of
+         an LSP at level 1. This object follows the
+         ResettingTimer behavior.
+         
+         Note that prvtIsisCircLvl1LSPThrottle controls
+         how fast we send back to back LSPs. This variable
+         controls how fast we re-send the same LSP."
+    REFERENCE   
+        "{ISIS.aoi minimumLSPTransmissionInterval (5)}"
+    ::= { prvtIsisCircEntry 40 }
+
+prvtIsisCircLvl1CSNPInterval OBJECT-TYPE
+    SYNTAX      Integer32 (1..600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Interval of time, in seconds, between periodic
+         transmission of a complete set of CSNPs on
+         multiaccess networks if this router is the
+         designated router at level 1.
+         This object follows the ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi completeSNPInterval (8)}"
+    ::= { prvtIsisCircEntry 41 }
+
+prvtIsisCircLvl1PartSNPInterval OBJECT-TYPE
+    SYNTAX      Integer32 (1..120)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Minimum interval in seconds between sending Partial
+         Sequence Number PDUs at level 1. This object
+         follows the ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi partialSNPInterval (14)}"
+    ::= { prvtIsisCircEntry 42 }
+
+prvtIsisCircLvl1StickyDIS OBJECT-TYPE
+    SYNTAX      Integer32 (0..127)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Boost to add to the priority of this router (up to the maximum
+         permitted value) when it becomes DIS at level 1 to make it
+         more likely to remain DIS."
+    ::= { prvtIsisCircEntry 43 }
+
+prvtIsisCircLvl1AuthUser OBJECT-TYPE
+    SYNTAX      PrvtIsisAuthUserDataString
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Authentication user data for level 1's authentication.
+         This data is passed opaquely to the authentication
+         interface where it can be used to assist with
+         authentication decisions."
+    ::= { prvtIsisCircEntry 44 }
+
+prvtIsisCircLvl1IDHostname OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The hostname corresponding to the system ID part of the
+         prvtIsisCircLvl1ID object.
+         
+         This is the null string if the prvtIsisCircLvl1ID object
+         is null, or if no hostname is known."
+    ::= { prvtIsisCircEntry 45 }
+
+prvtIsisCircLvl1DesISHostname OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The hostname corresponding to the system ID part of the
+         prvtIsisCircLvl1DesIS object.
+         
+         This is the null string if the prvtIsisCircLvl1DesIS object
+         is null, or if no hostname is known."
+    ::= { prvtIsisCircEntry 46 }
+
+prvtIsisCircLvl2Metric OBJECT-TYPE
+    SYNTAX      PrvtIsisDefaultMetric
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The metric value of this circuit for level 2."
+    REFERENCE   
+        "{ISIS.aoi l1DefaultMetric (35)}"
+    ::= { prvtIsisCircEntry 50 }
+
+prvtIsisCircLvl2WideMetric OBJECT-TYPE
+    SYNTAX      PrvtIsisWideMetric
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The wide metric value of this circuit for level 2."
+    ::= { prvtIsisCircEntry 51 }
+
+prvtIsisCircLvl2ISPriority OBJECT-TYPE
+    SYNTAX      PrvtIsisISPriority
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The priority for becoming the LAN-Designated
+         Intermediate System at level 2."
+    REFERENCE   
+        "{ISIS.aoi l2IntermediateSystemPriority (73)}"
+    ::= { prvtIsisCircEntry 52 }
+
+prvtIsisCircLvl2IDOctet OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A one byte identifier for the circuit selected by the
+         Intermediate System.
+         
+         On point-to-point circuits, the value is used as the Local
+         Circuit ID in point-to-point IIH PDUs transmitted on this
+         circuit. In this case, values of prvtIsisCircLvl2IDOctet do
+         not need to be unique.
+         
+         For broadcast circuits, the value is used to generate the
+         LAN ID that will be used if this Intermediate System is
+         elected as the Designated IS on this circuit. The value
+         is required to differ on LANs where the Intermediate System
+         is the Designated Intermediate System."
+    ::= { prvtIsisCircEntry 53 }
+
+prvtIsisCircLvl2ID OBJECT-TYPE
+    SYNTAX      PrvtIsisCircuitID
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "On a point to point circuit with a fully initialized
+         adjacency to a peer IS, the value of this object is
+         the circuit ID negotiated during adjacency initialization.
+         On a point to point circuit without such an adjacency,
+         the value is the concatenation of the local system ID
+         and the one byte prvtIsisCircLvl2IDOctet for this circuit
+         i.e. the value that would be proposed for the circuit ID.
+         
+         On other circuit types, the value returned is the zero
+         length OCTET STRING."
+    REFERENCE   
+        "{ISIS.aoi ptPtCircuitID (51)}"
+    ::= { prvtIsisCircEntry 54 }
+
+prvtIsisCircLvl2DesIS OBJECT-TYPE
+    SYNTAX      PrvtIsisCircuitID
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The ID of the LAN-Designated Intermediate System
+         on this circuit at level 2. If, for any reason,
+         this system is not partaking in the relevant
+         Designated Intermediate System election process,
+         then the value returned is the zero length OCTET STRING."
+    REFERENCE   
+        "{ISIS.aoi l2DesignatedIntermediateSystem (75)}"
+    ::= { prvtIsisCircEntry 55 }
+
+prvtIsisCircLvl2HelloMultiplier OBJECT-TYPE
+    SYNTAX      Integer32 (2..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This value is multiplied by the corresponding HelloTimer
+         and the result in seconds (rounded up) is used as the
+         holding time in transmitted hellos, to be used by
+         receivers of hello packets from this IS."
+    REFERENCE   
+        "{ISIS.aoi iSISHelloTimer (45)}"
+    ::= { prvtIsisCircEntry 56 }
+
+prvtIsisCircLvl2HelloTimer OBJECT-TYPE
+    SYNTAX      Integer32 (10..600000)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Maximum period, in milliseconds, between IIH PDUs
+         on multiaccess networks at level 2 for LANs.
+         The value at L1 is used as the period between
+         Hellos on L1L2 point to point circuits. Setting
+         this value at level 2 on an L1L2 point to point
+         circuit will result in an error of InconsistentValue.
+         
+         This object follows the ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi iSISHelloTimer (45)}"
+    ::= { prvtIsisCircEntry 57 }
+
+prvtIsisCircLvl2DRHelloTimer OBJECT-TYPE
+    SYNTAX      Integer32 (10..120000)
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Period, in milliseconds, between Hello PDUs on
+         multiaccess networks when this IS is the Designated
+         Intermediate System. This object follows the
+         ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi iSISHelloTimer (45)}"
+    ::= { prvtIsisCircEntry 58 }
+
+prvtIsisCircLvl2LSPThrottle OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16NoZeroTC
+    UNITS       "milliseconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Minimal interval of time, in milliseconds, between
+         transmissions of LSPs on an interface at level 2."
+    REFERENCE   
+        "{ISIS.aoi minimumBroadcastLSPTransmissionInterval (5)}"
+    ::= { prvtIsisCircEntry 59 }
+
+prvtIsisCircLvl2MinLSPRetransInt OBJECT-TYPE
+    SYNTAX      Integer32 (1..300)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Minimum interval, in seconds, between re-transmission of
+         an LSP at level 2. This object follows the
+         ResettingTimer behavior.
+         
+         Note that prvtIsisCircLvl2LSPThrottle controls
+         how fast we send back to back LSPs. This variable
+         controls how fast we re-send the same LSP."
+    REFERENCE   
+        "{ISIS.aoi minimumLSPTransmissionInterval (5)}"
+    ::= { prvtIsisCircEntry 60 }
+
+prvtIsisCircLvl2CSNPInterval OBJECT-TYPE
+    SYNTAX      Integer32 (1..600)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Interval of time, in seconds, between periodic
+         transmission of a complete set of CSNPs on
+         multiaccess networks if this router is the
+         designated router at level 2.
+         This object follows the ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi completeSNPInterval (8)}"
+    ::= { prvtIsisCircEntry 61 }
+
+prvtIsisCircLvl2PartSNPInterval OBJECT-TYPE
+    SYNTAX      Integer32 (1..120)
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Minimum interval in seconds between sending Partial
+         Sequence Number PDUs at level 2. This object
+         follows the ResettingTimer behavior."
+    REFERENCE   
+        "{ISIS.aoi partialSNPInterval (14)}"
+    ::= { prvtIsisCircEntry 62 }
+
+prvtIsisCircLvl2StickyDIS OBJECT-TYPE
+    SYNTAX      Integer32 (0..127)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Boost to add to the priority of this router (up to the maximum
+         permitted value) when it becomes DIS at level 2 to make it
+         more likely to remain DIS."
+    ::= { prvtIsisCircEntry 63 }
+
+prvtIsisCircLvl2IDHostname OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The hostname corresponding to the system ID part of the
+         prvtIsisCircLvl2ID object.
+         
+         This is the null string if the prvtIsisCircLvl2ID object
+         is null, or if no hostname is known."
+    ::= { prvtIsisCircEntry 65 }
+
+prvtIsisCircLvl2DesISHostname OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The hostname corresponding to the system ID part of the
+         prvtIsisCircLvl2DesIS object.
+         
+         This is the null string if the prvtIsisCircLvl2DesIS object
+         is null, or if no hostname is known."
+    ::= { prvtIsisCircEntry 66 }
+
+prvtIsisISAdj OBJECT IDENTIFIER
+    ::= { prvtIsisMIBObjects 6 }
+
+prvtIsisISAdjTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisISAdjEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of adjacencies to Intermediate Systems."
+    ::= { prvtIsisISAdj 1 }
+
+prvtIsisISAdjEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisISAdjEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry corresponds to one adjacency to an
+         Intermediate System on this system."
+    INDEX       { prvtIsisSysInstance, prvtIsisCircIfIndex, 
+                  prvtIsisISAdjIndex }
+    ::= { prvtIsisISAdjTable 1 }
+
+PrvtIsisISAdjEntry ::= SEQUENCE {
+    prvtIsisISAdjIndex                  Integer32,
+    prvtIsisISAdjState                  INTEGER,
+    prvtIsisISAdj3WayState              INTEGER,
+    prvtIsisISAdjNeighSNPAAddress       PrvtIsisOSINSAddress,
+    prvtIsisISAdjNeighSysType           INTEGER,
+    prvtIsisISAdjNeighSysID             PrvtIsisSystemID,
+    prvtIsisISAdjNbrExtendedCircID      Unsigned32,
+    prvtIsisISAdjUsage                  INTEGER,
+    prvtIsisISAdjHoldTimer              PrvtIsisUnsigned16NoZeroTC,
+    prvtIsisISAdjNeighPriority          PrvtIsisISPriority,
+    prvtIsisISAdjLastUpTime             TimeTicks,
+    prvtIsisISAdjRestartCapable         TruthValue,
+    prvtIsisISAdjPeerRestartState       INTEGER,
+    prvtIsisISAdjSuppressed             TruthValue,
+    prvtIsisISAdjNeighLanID             OCTET STRING,
+    prvtIsisISAdjNeighHostname          PrvtIsisHostName,
+    prvtIsisISAdjNeighLanIDHostname     PrvtIsisHostName
+}
+
+prvtIsisISAdjIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2000000000)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A unique value identifying the IS adjacency from all
+         other such adjacencies on this circuit. This value is
+         automatically assigned by the system when the adjacency
+         is created."
+    ::= { prvtIsisISAdjEntry 1 }
+
+prvtIsisISAdjState OBJECT-TYPE
+    SYNTAX      INTEGER { down(1), initializing(2), up(3), failed(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The state of the adjacency."
+    REFERENCE   
+        "{ISIS.aoi adjacencyState (78)}"
+    ::= { prvtIsisISAdjEntry 2 }
+
+prvtIsisISAdj3WayState OBJECT-TYPE
+    SYNTAX      INTEGER { up(0), initializing(1), down(2), failed(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The 3Way state of the adjacency. These are picked
+         to match the historical on-the-wire representation
+         of the 3Way state, and are not intended to match
+         prvtIsisISAdjState."
+    REFERENCE   
+        "{ RFC 3373 }"
+    ::= { prvtIsisISAdjEntry 3 }
+
+prvtIsisISAdjNeighSNPAAddress OBJECT-TYPE
+    SYNTAX      PrvtIsisOSINSAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The SNPA address of the neighboring system."
+    REFERENCE   
+        "{ISIS.aoi neighbourSNPAAddress (79)}"
+    ::= { prvtIsisISAdjEntry 4 }
+
+prvtIsisISAdjNeighSysType OBJECT-TYPE
+    SYNTAX      INTEGER { l1IntermediateSystem(1), 
+                    l2IntermediateSystem(2), l1L2IntermediateSystem(3), 
+                    unknown(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The type of the neighboring system."
+    REFERENCE   
+        "{ISIS.aoi neighbourSystemType (80)}"
+    ::= { prvtIsisISAdjEntry 5 }
+
+prvtIsisISAdjNeighSysID OBJECT-TYPE
+    SYNTAX      PrvtIsisSystemID
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The system ID of the neighboring Intermediate
+         System."
+    REFERENCE   
+        "{ISIS.aoi neighbourSystemIds (83)}"
+    ::= { prvtIsisISAdjEntry 6 }
+
+prvtIsisISAdjNbrExtendedCircID OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The 4-byte Extended Circuit ID learned from the
+         Neighbor during 3-way handshake, or 0."
+    ::= { prvtIsisISAdjEntry 7 }
+
+prvtIsisISAdjUsage OBJECT-TYPE
+    SYNTAX      INTEGER { level1(1), level2(2), level1and2(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "How is the adjacency used? On a point-to-point link,
+         this might be level1and2, but on a LAN, the usage will
+         be level1 on the adjacency between peers at L1,
+         and level2 for the adjacency between peers at L2."
+    REFERENCE   
+        "{ISIS.aoi adjacencyUsage (82)}"
+    ::= { prvtIsisISAdjEntry 8 }
+
+prvtIsisISAdjHoldTimer OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16NoZeroTC
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The holding time in seconds for this adjacency.
+         This value is based on received IIH PDUs and
+         the elapsed time since receipt."
+    REFERENCE   
+        "{ISIS.aoi holdingTimer (85)}"
+    ::= { prvtIsisISAdjEntry 9 }
+
+prvtIsisISAdjNeighPriority OBJECT-TYPE
+    SYNTAX      PrvtIsisISPriority
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Priority of the neighboring Intermediate System for
+         becoming the Designated Intermediate System."
+    REFERENCE   
+        "{ISIS.aoi lANPriority (86)}"
+    ::= { prvtIsisISAdjEntry 10 }
+
+prvtIsisISAdjLastUpTime OBJECT-TYPE
+    SYNTAX      TimeTicks
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "If the prvtIsisISAdjState is in state 'up', the value
+         of sysUpTime when the adjacency most recently
+         entered the state 'up', or 0 if it has never
+         been in state 'up'."
+    ::= { prvtIsisISAdjEntry 11 }
+
+prvtIsisISAdjRestartCapable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Does the neighbor support restart signalling?
+         
+         This object is set to 'true' if the peer includes the
+         restart TLV in IIH PDUs."
+    ::= { prvtIsisISAdjEntry 12 }
+
+prvtIsisISAdjPeerRestartState OBJECT-TYPE
+    SYNTAX      INTEGER { notRestarting(1), restartingNoHelp(2), 
+                    helpingRestart(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Is the peer currently restarting?
+         
+         Set to 'notRestarting' if the neighbor is not restarting
+         (is not including a restart TLV in the IIH, or is not setting the
+         RR bit).
+         
+         Set to 'restartingNoHelp' if the neighbor is restarting
+         (is including a restart TLV with the RR bit in IIH PDUs), but
+         the local node is not helping the restart.
+         
+         Set to 'helpingRestart' if the neighbor is restarting and the
+         local node is helping the restart."
+    ::= { prvtIsisISAdjEntry 13 }
+
+prvtIsisISAdjSuppressed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Has the peer requested that the adjacency be suppressed?
+         If set to 'true', the adjacency will not be added to the
+         local LSP.
+         
+         This object is set to 'true' if the peer sets the SA bit in
+         the restart TLV in IIH PDUs."
+    ::= { prvtIsisISAdjEntry 14 }
+
+prvtIsisISAdjNeighLanID OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "On a broadcast circuit, the LAN ID reported by the
+         neighbor for the Designated Intermediate System on this
+         circuit at this level. For a non-broadcast circuit, or if,
+         for any reason, the neighbor is not partaking in the
+         relevant Designated Intermediate System election process,
+         then the value returned is the zero length OCTET STRING."
+    ::= { prvtIsisISAdjEntry 15 }
+
+prvtIsisISAdjNeighHostname OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The hostname corresponding to prvtIsisISAdjNeighSysID.
+         This is the null string if prvtIsisSdEntMapHostnames is
+         'false' or if no hostname is known."
+    ::= { prvtIsisISAdjEntry 16 }
+
+prvtIsisISAdjNeighLanIDHostname OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The hostname corresponding to the system ID part of the
+         prvtIsisISAdjNeighLanID object.
+         
+         This is the null string if the prvtIsisISAdjNeighLanID object
+         is null, if prvtIsisSdEntMapHostnames is 'false', or if no
+         hostname is known."
+    ::= { prvtIsisISAdjEntry 17 }
+
+prvtIsisISAdjAreaAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisISAdjAreaAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains the set of Area Addresses of
+         neighboring Intermediate Systems as reported in received
+         IIH PDUs."
+    REFERENCE   
+        "{ISIS.aoi areaAddressesOfNeighbour (84)}"
+    ::= { prvtIsisISAdj 2 }
+
+prvtIsisISAdjAreaAddrEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisISAdjAreaAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry contains one Area Address reported by a
+         neighboring Intermediate System in its IIH PDUs."
+    INDEX       { prvtIsisSysInstance, prvtIsisCircIfIndex, 
+                  prvtIsisISAdjIndex, prvtIsisISAdjAreaAddrIndex }
+    ::= { prvtIsisISAdjAreaAddrTable 1 }
+
+PrvtIsisISAdjAreaAddrEntry ::= SEQUENCE {
+    prvtIsisISAdjAreaAddrIndex  Integer32,
+    prvtIsisISAdjAreaAddress    PrvtIsisOSINSAddress
+}
+
+prvtIsisISAdjAreaAddrIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2000000000)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index for the areas associated with one neighbor.
+         This provides a simple way to walk the table."
+    ::= { prvtIsisISAdjAreaAddrEntry 1 }
+
+prvtIsisISAdjAreaAddress OBJECT-TYPE
+    SYNTAX      PrvtIsisOSINSAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "One Area Address as reported in IIH PDUs received from
+         the neighbor."
+    ::= { prvtIsisISAdjAreaAddrEntry 2 }
+
+prvtIsisISAdjIPAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisISAdjIPAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains the set of IP Addresses of
+         neighboring Intermediate Systems as reported in received
+         IIH PDUs.
+         
+         If the prvtIsisSysRstrctLanAdjsToSubnet object in prvtIsisSysTable
+         is set to 'true' then for an IPv4 broadcast circuit, only
+         IP addresses on the same subnet as the local circuit are
+         included in this table."
+    ::= { prvtIsisISAdj 3 }
+
+prvtIsisISAdjIPAddrEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisISAdjIPAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry contains one IP Address reported by a
+         neighboring Intermediate System in its IIH PDUs."
+    INDEX       { prvtIsisSysInstance, prvtIsisCircIfIndex, 
+                  prvtIsisISAdjIndex, prvtIsisISAdjIPAddrIndex }
+    ::= { prvtIsisISAdjIPAddrTable 1 }
+
+PrvtIsisISAdjIPAddrEntry ::= SEQUENCE {
+    prvtIsisISAdjIPAddrIndex    Integer32,
+    prvtIsisISAdjIPAddrType     PrvtIsisInetAddressType,
+    prvtIsisISAdjIPAddrAddress  PrvtIsisInetAddress
+}
+
+prvtIsisISAdjIPAddrIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2000000000)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index to this table which identifies the IP addresss
+         to which this entry belongs."
+    ::= { prvtIsisISAdjIPAddrEntry 1 }
+
+prvtIsisISAdjIPAddrType OBJECT-TYPE
+    SYNTAX      PrvtIsisInetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The type of one IP Address as reported in IIH PDUs
+         received from the neighbor."
+    ::= { prvtIsisISAdjIPAddrEntry 2 }
+
+prvtIsisISAdjIPAddrAddress OBJECT-TYPE
+    SYNTAX      PrvtIsisInetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "One IP Address as reported in IIH PDUs received from the
+         neighbor.
+         
+         The type of this address is determined by the value of
+         the prvtIsisISAdjIPAddrType object."
+    ::= { prvtIsisISAdjIPAddrEntry 3 }
+
+prvtIsisIPReachAddr OBJECT IDENTIFIER
+    ::= { prvtIsisMIBObjects 8 }
+
+prvtIsisIPRATable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisIPRAEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of IP Reachable Addresses to networks,
+         subnetworks or hosts, learned automatically.
+         
+         This table is read-only. Manual addition of entries
+         using this table is not supported."
+    ::= { prvtIsisIPReachAddr 1 }
+
+prvtIsisIPRAEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisIPRAEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry defines an IP Reachable Address to a network,
+         subnetwork or host.
+         
+         Each IP Reachable Address may have multiple entries in the
+         table, one for each equal cost path to the reachable address."
+    INDEX       { prvtIsisSysInstance, prvtIsisIPRADestType, 
+                  prvtIsisIPRADest, prvtIsisIPRADestPrefixLen, 
+                  prvtIsisIPRANextHopIndex }
+    ::= { prvtIsisIPRATable 1 }
+
+PrvtIsisIPRAEntry ::= SEQUENCE {
+    prvtIsisIPRADestType        PrvtIsisInetAddressType,
+    prvtIsisIPRADest            PrvtIsisInetAddress,
+    prvtIsisIPRADestPrefixLen   InetAddressPrefixLength,
+    prvtIsisIPRANextHopIndex    Integer32,
+    prvtIsisIPRANextHopType     PrvtIsisInetAddressType,
+    prvtIsisIPRANextHop         PrvtIsisInetAddress,
+    prvtIsisIPRAType            INTEGER,
+    prvtIsisIPRAAdminState      PrvtIsisAdminState,
+    prvtIsisIPRAMetric          PrvtIsisDefaultMetric,
+    prvtIsisIPRAMetricType      PrvtIsisMetricType,
+    prvtIsisIPRAFullMetric      PrvtIsisFullMetric,
+    prvtIsisIPRASNPAAddress     PrvtIsisOSINSAddress,
+    prvtIsisIPRASourceType      INTEGER
+}
+
+prvtIsisIPRADestType OBJECT-TYPE
+    SYNTAX      PrvtIsisInetAddressType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type of this IP Reachable Address."
+    ::= { prvtIsisIPRAEntry 1 }
+
+prvtIsisIPRADest OBJECT-TYPE
+    SYNTAX      PrvtIsisInetAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The destination of this IP Reachable Address. This is
+         either a network address, subnetwork address or host
+         address.
+         
+         The type of this address is determined by the value of
+         the prvtIsisIPRADestType object."
+    ::= { prvtIsisIPRAEntry 2 }
+
+prvtIsisIPRADestPrefixLen OBJECT-TYPE
+    SYNTAX      InetAddressPrefixLength (0..128)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The length of the IP Netmask for Reachability Address."
+    ::= { prvtIsisIPRAEntry 3 }
+
+prvtIsisIPRANextHopIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index of next hop. Used when there are multiple Equal
+         Cost Multipath alternatives for the same destination."
+    ::= { prvtIsisIPRAEntry 4 }
+
+prvtIsisIPRANextHopType OBJECT-TYPE
+    SYNTAX      PrvtIsisInetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The type of the IP next hop address."
+    ::= { prvtIsisIPRAEntry 5 }
+
+prvtIsisIPRANextHop OBJECT-TYPE
+    SYNTAX      PrvtIsisInetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The IP next hop to this destination.
+         
+         The type of this address is determined by the value of
+         the prvtIsisIPRANextHopType object."
+    ::= { prvtIsisIPRAEntry 6 }
+
+prvtIsisIPRAType OBJECT-TYPE
+    SYNTAX      INTEGER { manual(1), automatic(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The type of this IP Reachable Address. Those of type
+         manual are created by the network manager. Those of type
+         automatic are created through propagation of routing
+         information from another routing protocol.
+         
+         Currently only automatic entries in this table are supported."
+    ::= { prvtIsisIPRAEntry 7 }
+
+prvtIsisIPRAAdminState OBJECT-TYPE
+    SYNTAX      PrvtIsisAdminState
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The administrative state of the IP Reachable Address."
+    ::= { prvtIsisIPRAEntry 9 }
+
+prvtIsisIPRAMetric OBJECT-TYPE
+    SYNTAX      PrvtIsisDefaultMetric
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The metric value for reaching the specified
+         destination over this circuit."
+    ::= { prvtIsisIPRAEntry 10 }
+
+prvtIsisIPRAMetricType OBJECT-TYPE
+    SYNTAX      PrvtIsisMetricType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates whether the metric is internal or
+         external."
+    ::= { prvtIsisIPRAEntry 11 }
+
+prvtIsisIPRAFullMetric OBJECT-TYPE
+    SYNTAX      PrvtIsisFullMetric
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The wide metric value for reaching the specified
+         destination over this circuit."
+    ::= { prvtIsisIPRAEntry 12 }
+
+prvtIsisIPRASNPAAddress OBJECT-TYPE
+    SYNTAX      PrvtIsisOSINSAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The SNPA Address to which a PDU may be forwarded in
+         order to reach a destination which matches this IP
+         Reachable Address.
+         This field is currently not supported."
+    ::= { prvtIsisIPRAEntry 13 }
+
+prvtIsisIPRASourceType OBJECT-TYPE
+    SYNTAX      INTEGER { static(1), direct(2), ospfv2(3), ospfv3(4), 
+                    isis(5), rip(6), igrp(7), eigrp(8), bgp(9), 
+                    other(10) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The origin of this route."
+    ::= { prvtIsisIPRAEntry 14 }
+
+prvtIsisLSPDataBase OBJECT IDENTIFIER
+    ::= { prvtIsisMIBObjects 9 }
+
+prvtIsisLSPSummaryTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisLSPSummaryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of LSP Headers."
+    ::= { prvtIsisLSPDataBase 1 }
+
+prvtIsisLSPSummaryEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisLSPSummaryEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry provides a summary describing an
+         LSP currently stored in the system."
+    INDEX       { prvtIsisSysInstance, prvtIsisLSPLevel, prvtIsisLSPID }
+    ::= { prvtIsisLSPSummaryTable 1 }
+
+PrvtIsisLSPSummaryEntry ::= SEQUENCE {
+    prvtIsisLSPLevel            PrvtIsisISLevel,
+    prvtIsisLSPID               PrvtIsisLinkStatePDUID,
+    prvtIsisLSPSeq              Unsigned32,
+    prvtIsisLSPZeroLife         TruthValue,
+    prvtIsisLSPChecksum         PrvtIsisUnsigned16TC,
+    prvtIsisLSPLifetimeRemain   PrvtIsisUnsigned16TC,
+    prvtIsisLSPPDULength        PrvtIsisUnsigned16TC,
+    prvtIsisLSPAttributes       PrvtIsisUnsigned8TC,
+    prvtIsisLSPIDHostname       PrvtIsisHostName
+}
+
+prvtIsisLSPLevel OBJECT-TYPE
+    SYNTAX      PrvtIsisISLevel
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "At which level does this LSP appear?"
+    ::= { prvtIsisLSPSummaryEntry 1 }
+
+prvtIsisLSPID OBJECT-TYPE
+    SYNTAX      PrvtIsisLinkStatePDUID
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The 8-byte LSP ID, consisting of the SystemID,
+         Circuit ID, and Fragment Number."
+    ::= { prvtIsisLSPSummaryEntry 2 }
+
+prvtIsisLSPSeq OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The sequence number for this LSP."
+    ::= { prvtIsisLSPSummaryEntry 3 }
+
+prvtIsisLSPZeroLife OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Is this LSP being purged by this System?"
+    ::= { prvtIsisLSPSummaryEntry 4 }
+
+prvtIsisLSPChecksum OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16TC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The 16 bit Fletcher Checksum for this LSP."
+    ::= { prvtIsisLSPSummaryEntry 5 }
+
+prvtIsisLSPLifetimeRemain OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16TC
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The remaining lifetime in seconds for this LSP.
+         
+         For a current LSP (prvtIsisLSPZeroLife is 'false'), this
+         indicates the time remaining before the LSP will expire.
+         For an LSP being purged from the system (prvtIsisLSPZeroLife
+         is 'true'), the LSP remains in the database for
+         ZeroAgeLifetime, and this will indicate the time remaining
+         before final deletion of the LSP."
+    ::= { prvtIsisLSPSummaryEntry 6 }
+
+prvtIsisLSPPDULength OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16TC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The length of this LSP."
+    ::= { prvtIsisLSPSummaryEntry 7 }
+
+prvtIsisLSPAttributes OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned8TC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Flags carried by the LSP."
+    ::= { prvtIsisLSPSummaryEntry 8 }
+
+prvtIsisLSPIDHostname OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The hostname corresponding to the system ID part of the
+         prvtIsisLSPID object.
+         
+         This is the null string if no hostname is known."
+    ::= { prvtIsisLSPSummaryEntry 9 }
+
+prvtIsisLSPTLVTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtIsisLSPTLVEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of LSPs in the database."
+    ::= { prvtIsisLSPDataBase 2 }
+
+prvtIsisLSPTLVEntry OBJECT-TYPE
+    SYNTAX      PrvtIsisLSPTLVEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry describes a TLV within
+         an LSP currently stored in the
+         system."
+    INDEX       { prvtIsisSysInstance, prvtIsisLSPLevel, prvtIsisLSPID, 
+                  prvtIsisLSPTLVIndex }
+    ::= { prvtIsisLSPTLVTable 1 }
+
+PrvtIsisLSPTLVEntry ::= SEQUENCE {
+    prvtIsisLSPTLVIndex     Unsigned32,
+    prvtIsisLSPTLVSeq       Unsigned32,
+    prvtIsisLSPTLVChecksum  PrvtIsisUnsigned16TC,
+    prvtIsisLSPTLVType      PrvtIsisUnsigned8TC,
+    prvtIsisLSPTLVLen       PrvtIsisUnsigned8TC,
+    prvtIsisLSPTLVValue     OCTET STRING,
+    prvtIsisLSPTLVHostname  PrvtIsisHostName
+}
+
+prvtIsisLSPTLVIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The index of this TLV in the LSP. The first TLV has index 1
+         and the Nth TLV has an index of N."
+    ::= { prvtIsisLSPTLVEntry 1 }
+
+prvtIsisLSPTLVSeq OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The sequence number for this LSP."
+    ::= { prvtIsisLSPTLVEntry 2 }
+
+prvtIsisLSPTLVChecksum OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned16TC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The 16 bit Fletcher Checksum for this LSP."
+    ::= { prvtIsisLSPTLVEntry 3 }
+
+prvtIsisLSPTLVType OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned8TC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The type of this TLV."
+    ::= { prvtIsisLSPTLVEntry 4 }
+
+prvtIsisLSPTLVLen OBJECT-TYPE
+    SYNTAX      PrvtIsisUnsigned8TC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The length of this TLV."
+    ::= { prvtIsisLSPTLVEntry 5 }
+
+prvtIsisLSPTLVValue OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value of this TLV."
+    ::= { prvtIsisLSPTLVEntry 6 }
+
+prvtIsisLSPTLVHostname OBJECT-TYPE
+    SYNTAX      PrvtIsisHostName
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The hostname corresponding to the system ID part of the
+         prvtIsisLSPID object.
+         
+         This is the null string if no hostname is known."
+    ::= { prvtIsisLSPTLVEntry 7 }
+
+END -- end of module PRVT-ISIS-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-L2TUNNELING-MIB b/MIBS/telco-systems/binox/PRVT-L2TUNNELING-MIB
new file mode 100644
index 0000000..7967376
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-L2TUNNELING-MIB
@@ -0,0 +1,396 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-L2TUNNELING-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-L2TUNNELING-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    sapEntry, sdpEntry
+        FROM PRVT-SERV-MIB
+    serviceAccessSwitch
+        FROM PRVT-SWITCH-MIB
+    Counter32, MODULE-IDENTITY, OBJECT-TYPE
+        FROM SNMPv2-SMI
+    DisplayString, RowStatus, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+prvtL2TunnelingMIB MODULE-IDENTITY
+    LAST-UPDATED "201001290000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This document is the SNMP MIB module to manage the
+         layer two tunneling feature, designed for service providers."
+    REVISION    "201001290000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { serviceAccessSwitch 3 }
+
+
+PrvtL2TunnelProfileNameTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "32a"
+    STATUS      current
+    DESCRIPTION 
+        "The name of a tunneling profile."
+    SYNTAX      OCTET STRING (SIZE(1..32))
+
+PrvtL2TunnelProfileNameOrNoneTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "32a"
+    STATUS      current
+    DESCRIPTION 
+        "Same as PrvtL2TunnelProfileNameTC except that a zero
+         length octet string represents no profile has been assigned."
+    SYNTAX      OCTET STRING (SIZE(0..32))
+
+prvtL2TunnelingMIBObjects OBJECT IDENTIFIER
+    ::= { prvtL2TunnelingMIB 1 }
+
+prvtL2TunnEnable OBJECT-TYPE
+    SYNTAX      INTEGER { enable(1), disable(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/Disable L2 Tunneling feature"
+    ::= { prvtL2TunnelingMIBObjects 1 }
+
+prvtL2TunnProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtL2TunnProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains all predefined and defined profiles."
+    ::= { prvtL2TunnelingMIBObjects 2 }
+
+prvtL2TunnProfileEntry OBJECT-TYPE
+    SYNTAX      PrvtL2TunnProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table contains a TLS tunneling profile"
+    INDEX       { prvtL2TunnProfileName }
+    ::= { prvtL2TunnProfileTable 1 }
+
+PrvtL2TunnProfileEntry ::= SEQUENCE {
+    prvtL2TunnProfileName       PrvtL2TunnelProfileNameTC,
+    prvtL2TunnProfileRowStatus  RowStatus
+}
+
+prvtL2TunnProfileName OBJECT-TYPE
+    SYNTAX      PrvtL2TunnelProfileNameTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "TLS profile name.
+         There are three predefined profiles:
+         - discard-all
+         - tunnel-bdpu
+         - tunnel-all"
+    ::= { prvtL2TunnProfileEntry 1 }
+
+prvtL2TunnProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "TLS profile rowStatus. It is not possible to
+         modify the predefined profiles."
+    ::= { prvtL2TunnProfileEntry 2 }
+
+prvtL2ProtocolsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtL2ProtocolsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains all predefined and
+         custom defined L2 Protocols"
+    ::= { prvtL2TunnelingMIBObjects 3 }
+
+prvtL2ProtocolsEntry OBJECT-TYPE
+    SYNTAX      PrvtL2ProtocolsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtL2ProtocolsTable."
+    INDEX       { prvtL2ProtocolName }
+    ::= { prvtL2ProtocolsTable 1 }
+
+PrvtL2ProtocolsEntry ::= SEQUENCE {
+    prvtL2ProtocolName          OCTET STRING,
+    prvtL2ProtocolRowStatus     RowStatus,
+    prvtL2ProtocolEthertype     OCTET STRING,
+    prvtL2ProtocolMAC           OCTET STRING,
+    prvtL2ReplaceMAC            OCTET STRING
+}
+
+prvtL2ProtocolName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..16))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "L2 Protocol Name.
+         The following protocol names are pre-defined:
+         - stp
+         - lacp
+         - efm-oam
+         - dot1x
+         - e-lmi
+         - lldp
+         - other   (All other bridge block of protocols)
+         - all-brs (All Bridges)
+         - garp    (GARP Block of Protocols)
+         - pb-stp  (Provider Bridge STP)
+         - pvst    (Per-VLAN STP)"
+    ::= { prvtL2ProtocolsEntry 1 }
+
+prvtL2ProtocolRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus used to create/delete custom protocols.
+         It is not possible to modify the predefined protocols."
+    ::= { prvtL2ProtocolsEntry 2 }
+
+prvtL2ProtocolEthertype OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The protocol Ethertype."
+    ::= { prvtL2ProtocolsEntry 3 }
+
+prvtL2ProtocolMAC OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The protocol multicast MAC address
+         used for PDU distribution."
+    ::= { prvtL2ProtocolsEntry 4 }
+
+prvtL2ReplaceMAC OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The replacement multicast MAC address."
+    ::= { prvtL2ProtocolsEntry 5 }
+
+prvtL2TunnProfMapProtoTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtL2TunnProfMapProtoEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contain actions configured
+         for each L2 protocol per TLS tunneling profile."
+    ::= { prvtL2TunnelingMIBObjects 4 }
+
+prvtL2TunnProfMapProtoEntry OBJECT-TYPE
+    SYNTAX      PrvtL2TunnProfMapProtoEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table contains the
+         action for the specified profile and L2 protocol"
+    INDEX       { prvtL2TunnProfileName, prvtL2ProtocolName }
+    ::= { prvtL2TunnProfMapProtoTable 1 }
+
+PrvtL2TunnProfMapProtoEntry ::= SEQUENCE {
+    prvtL2TunnProfMapProtoRowStatus     RowStatus,
+    prvtL2TunnProfMapProtoAction        INTEGER
+}
+
+prvtL2TunnProfMapProtoRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Create/delete rows"
+    ::= { prvtL2TunnProfMapProtoEntry 1 }
+
+prvtL2TunnProfMapProtoAction OBJECT-TYPE
+    SYNTAX      INTEGER { tunnel(1), discard(2), peer(3), peerAndPass(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action for this TLS tunneled protocol"
+    ::= { prvtL2TunnProfMapProtoEntry 2 }
+
+prvtL2TunnSapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtL2TunnSapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains assignments of profiles to SAPs."
+    ::= { prvtL2TunnelingMIBObjects 5 }
+
+prvtL2TunnSapEntry OBJECT-TYPE
+    SYNTAX      PrvtL2TunnSapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table contains information
+         about the mapping between SAP and L2 Tunneling profiles."
+    AUGMENTS    { sapEntry }
+    ::= { prvtL2TunnSapTable 1 }
+
+PrvtL2TunnSapEntry ::= SEQUENCE {
+    prvtL2TunnSapProfile    PrvtL2TunnelProfileNameOrNoneTC
+}
+
+prvtL2TunnSapProfile OBJECT-TYPE
+    SYNTAX      PrvtL2TunnelProfileNameOrNoneTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The profile associated with a SAP point.
+         Setting this object with an empty string
+         will remove a profile from the SAP."
+    ::= { prvtL2TunnSapEntry 1 }
+
+prvtL2TunnSdpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtL2TunnSdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains assignments of profiles to SDPs."
+    ::= { prvtL2TunnelingMIBObjects 6 }
+
+prvtL2TunnSdpEntry OBJECT-TYPE
+    SYNTAX      PrvtL2TunnSdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table contains information
+         about the mapping between SDP and L2 Tunneling profiles."
+    AUGMENTS    { sdpEntry }
+    ::= { prvtL2TunnSdpTable 1 }
+
+PrvtL2TunnSdpEntry ::= SEQUENCE {
+    prvtL2TunnSdpProfile    PrvtL2TunnelProfileNameOrNoneTC
+}
+
+prvtL2TunnSdpProfile OBJECT-TYPE
+    SYNTAX      PrvtL2TunnelProfileNameOrNoneTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The profile associated with an SDP point.
+         Setting this object with an empty string
+         will remove a profile from the SDP."
+    ::= { prvtL2TunnSdpEntry 1 }
+
+prvtL2TunnStatisticsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtL2TunnStatisticsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A Table that provide statistics for each
+         tunneling point per protocol."
+    ::= { prvtL2TunnelingMIBObjects 8 }
+
+prvtL2TunnStatisticsEntry OBJECT-TYPE
+    SYNTAX      PrvtL2TunnStatisticsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table contain the number of
+         tunneling RX and TX packets ."
+    INDEX       { prvtL2TunnInterfaceName, prvtL2TunnProtocolName }
+    ::= { prvtL2TunnStatisticsTable 1 }
+
+PrvtL2TunnStatisticsEntry ::= SEQUENCE {
+    prvtL2TunnInterfaceName     DisplayString,
+    prvtL2TunnProtocolName      DisplayString,
+    prvtL2TunnRxPackets         Counter32,
+    prvtL2TunnTxPackets         Counter32
+}
+
+prvtL2TunnInterfaceName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(4..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The interface name.
+         It is held in a string that is represented as follows:
+         SAP  - (U/S/P|ag1-14|ies)[:VlanId[:VlanID]][:igmp]
+         SDP  - (U/S/P:VlanId)|(ServiceId:A.B.C.D)
+         
+         e.g.:	 
+         SAP/SDP  -  1/1/1:22:, 10.1.1.1:10"
+    ::= { prvtL2TunnStatisticsEntry 1 }
+
+prvtL2TunnProtocolName OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(1..16))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "L2 Protocol Name"
+    ::= { prvtL2TunnStatisticsEntry 2 }
+
+prvtL2TunnRxPackets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of Rx L2Tunneling packets"
+    ::= { prvtL2TunnStatisticsEntry 3 }
+
+prvtL2TunnTxPackets OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of Tx L2Tunneling packets"
+    ::= { prvtL2TunnStatisticsEntry 4 }
+
+prvtL2TunnClearStatistics OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), clear(1) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Clear L2Tunneling statistics for each tunneling point"
+    ::= { prvtL2TunnelingMIBObjects 9 }
+
+END -- end of module PRVT-L2TUNNELING-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-LLDP-MIB b/MIBS/telco-systems/binox/PRVT-LLDP-MIB
new file mode 100644
index 0000000..320c762
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-LLDP-MIB
@@ -0,0 +1,763 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-LLDP-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-LLDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    PhysAddress, RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtLldpMIB MODULE-IDENTITY
+    LAST-UPDATED "200907280000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Management Information Base module for LLDP configuration"
+    REVISION    "200907280000Z"
+    DESCRIPTION 
+        "Initial revision."
+    ::= { switch 145 }
+
+
+prvtlldpNotifications OBJECT IDENTIFIER
+    ::= { prvtLldpMIB 0 }
+
+prvtLldpObjects OBJECT IDENTIFIER
+    ::= { prvtLldpMIB 1 }
+
+prvtLldpEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/disable the LLDP on the device"
+    ::= { prvtLldpObjects 1 }
+
+prvtLldpReinitDelay OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the time interval (in [s]) at
+         which the interface is checked if is enabled
+         again so that the port can be reinitialized"
+    ::= { prvtLldpObjects 2 }
+
+prvtLldpSnmpNotifyInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (5..3600)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Set the SNMP notification interval (in [s])"
+    ::= { prvtLldpObjects 3 }
+
+prvtLldpTransmitDelay OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8192)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the minimum transmint delay interval (in [s])"
+    ::= { prvtLldpObjects 4 }
+
+prvtLldpTransmitHold OBJECT-TYPE
+    SYNTAX      Unsigned32 (2..10)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the transmit-hold parameter"
+    ::= { prvtLldpObjects 5 }
+
+prvtLldpTransmitInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (5..32768)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the minimum transmint interval (in [s])"
+    ::= { prvtLldpObjects 6 }
+
+prvtLldpStatisticsObjects OBJECT IDENTIFIER
+    ::= { prvtLldpObjects 7 }
+
+prvtLldpStatsRemTablesLastChange OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Time from last remote table change."
+    ::= { prvtLldpStatisticsObjects 1 }
+
+prvtLldpStatsRemTablesInserts OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of entries insterted in remote table"
+    ::= { prvtLldpStatisticsObjects 2 }
+
+prvtLldpStatsRemTablesDeletes OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of entries deleted in remote table"
+    ::= { prvtLldpStatisticsObjects 3 }
+
+prvtLldpStatsRemTablesDrops OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of entries dropped from remote table"
+    ::= { prvtLldpStatisticsObjects 4 }
+
+prvtLldpStatsRemTablesAgeouts OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of entries dropped from remote table"
+    ::= { prvtLldpStatisticsObjects 5 }
+
+prvtLldpStatsTxPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLldpStatsTxPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing send LLDPDU from all ports."
+    ::= { prvtLldpObjects 8 }
+
+prvtLldpStatsTxPortEntry OBJECT-TYPE
+    SYNTAX      PrvtLldpStatsTxPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry for send LLDPDU from given port."
+    INDEX       { prvtLldpStatsTxIfNum }
+    ::= { prvtLldpStatsTxPortTable 1 }
+
+PrvtLldpStatsTxPortEntry ::= SEQUENCE {
+    prvtLldpStatsTxIfNum                OCTET STRING,
+    prvtLldpStatsTxPortFramesTotal      Unsigned32,
+    prvtLldpStatsTxPortFramesMalformed  Unsigned32
+}
+
+prvtLldpStatsTxIfNum OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface name."
+    ::= { prvtLldpStatsTxPortEntry 1 }
+
+prvtLldpStatsTxPortFramesTotal OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total LLDPDUs send from this interface"
+    ::= { prvtLldpStatsTxPortEntry 2 }
+
+prvtLldpStatsTxPortFramesMalformed OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Malformed LLDPDUs send from this interface"
+    ::= { prvtLldpStatsTxPortEntry 3 }
+
+prvtLldpStatsRxPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLldpStatsRxPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing received LLDPDU from all ports."
+    ::= { prvtLldpObjects 9 }
+
+prvtLldpStatsRxPortEntry OBJECT-TYPE
+    SYNTAX      PrvtLldpStatsRxPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry for received LLDPDU from given port."
+    INDEX       { prvtLldpStatsRxIfNum }
+    ::= { prvtLldpStatsRxPortTable 1 }
+
+PrvtLldpStatsRxPortEntry ::= SEQUENCE {
+    prvtLldpStatsRxIfNum                        OCTET STRING,
+    prvtLldpStatsRxPortFramesDiscardedTotal     Unsigned32,
+    prvtLldpStatsRxPortFramesErrors             Unsigned32,
+    prvtLldpStatsRxPortFramesTotal              Unsigned32,
+    prvtLldpStatsRxPortTLVsDiscardedTotal       Unsigned32,
+    prvtLldpStatsRxPortTLVsUnrecognizedTotal    Unsigned32,
+    prvtLldpStatsRxPortAgeoutsTotal             Unsigned32
+}
+
+prvtLldpStatsRxIfNum OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface name."
+    ::= { prvtLldpStatsRxPortEntry 1 }
+
+prvtLldpStatsRxPortFramesDiscardedTotal OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of discarded frames from port."
+    ::= { prvtLldpStatsRxPortEntry 2 }
+
+prvtLldpStatsRxPortFramesErrors OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of frame errors on port."
+    ::= { prvtLldpStatsRxPortEntry 3 }
+
+prvtLldpStatsRxPortFramesTotal OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of received frames from port."
+    ::= { prvtLldpStatsRxPortEntry 4 }
+
+prvtLldpStatsRxPortTLVsDiscardedTotal OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of discarded TLVs from port"
+    ::= { prvtLldpStatsRxPortEntry 5 }
+
+prvtLldpStatsRxPortTLVsUnrecognizedTotal OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of unrecognized TLVs from port."
+    ::= { prvtLldpStatsRxPortEntry 6 }
+
+prvtLldpStatsRxPortAgeoutsTotal OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of age outs on port."
+    ::= { prvtLldpStatsRxPortEntry 7 }
+
+prvtLldpLocalSystemDataObjects OBJECT IDENTIFIER
+    ::= { prvtLldpObjects 10 }
+
+prvtLldpLocChassisIdSubtype OBJECT-TYPE
+    SYNTAX      INTEGER { chassisComponent(1), interfaceAlias(2), 
+                    portComponent(3), macAddress(4), networkAddress(5), 
+                    interfaceName(6), local(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Subtype of the local Chasis"
+    ::= { prvtLldpLocalSystemDataObjects 1 }
+
+prvtLldpLocChassisId OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "MAC address of the local chassis."
+    ::= { prvtLldpLocalSystemDataObjects 2 }
+
+prvtLldpLocSysName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local system name."
+    ::= { prvtLldpLocalSystemDataObjects 3 }
+
+prvtLldpLocSysDesc OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local system description."
+    ::= { prvtLldpLocalSystemDataObjects 4 }
+
+prvtLldpLocSysCapSupported OBJECT-TYPE
+    SYNTAX      BITS { other(0), bridge(2), wlanAccessPoint(3), 
+                    router(4), telephone(5), docsisCableDevice(6), 
+                    stationOnly(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local system supported capabilities."
+    ::= { prvtLldpLocalSystemDataObjects 5 }
+
+prvtLldpLocSysCapEnabled OBJECT-TYPE
+    SYNTAX      BITS { other(0), bridge(2), wlanAccessPoint(3), 
+                    router(4), telephone(5), docsisCableDevice(6), 
+                    stationOnly(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local system enabled capabilities."
+    ::= { prvtLldpLocalSystemDataObjects 6 }
+
+prvtLldpLocManAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLldpLocManAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table of local management addresses."
+    ::= { prvtLldpObjects 11 }
+
+prvtLldpLocManAddrEntry OBJECT-TYPE
+    SYNTAX      PrvtLldpLocManAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Local management address entry"
+    INDEX       { prvtLldpLocManAddrSubtype, prvtLldpLocManAddress }
+    ::= { prvtLldpLocManAddrTable 1 }
+
+PrvtLldpLocManAddrEntry ::= SEQUENCE {
+    prvtLldpLocManAddrSubtype       INTEGER,
+    prvtLldpLocManAddress           OCTET STRING,
+    prvtLldpLocManAddrLen           Integer32,
+    prvtLldpLocManAddrIfSubtype     INTEGER,
+    prvtLldpLocManAddrIfId          Integer32,
+    prvtLldpLocManAddrOID           OBJECT IDENTIFIER
+}
+
+prvtLldpLocManAddrSubtype OBJECT-TYPE
+    SYNTAX      INTEGER { other(0), ipV4(1), ipV6(2), nsap(3), hldc(4), 
+                    bbn1822(5), all802(6), e163(7), e164(8), f69(9), 
+                    x121(10), ipx(11), appletalk(12), decnetIV(13), 
+                    banyanVines(14), e164withNsap(15), dns(16), 
+                    distinguishedname(17), asnumber(18), xtpoveripv4(19), 
+                    xtpoveripv6(20), xtpnativemodextp(21), 
+                    reserved(65535) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Subtype of local management address"
+    ::= { prvtLldpLocManAddrEntry 1 }
+
+prvtLldpLocManAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..31))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Local management address"
+    ::= { prvtLldpLocManAddrEntry 2 }
+
+prvtLldpLocManAddrLen OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Lenght of local managemet address"
+    ::= { prvtLldpLocManAddrEntry 3 }
+
+prvtLldpLocManAddrIfSubtype OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), ifIndex(2), systemPortNumber(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Local management addres interface subtype"
+    ::= { prvtLldpLocManAddrEntry 4 }
+
+prvtLldpLocManAddrIfId OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Interface index of local management address"
+    ::= { prvtLldpLocManAddrEntry 5 }
+
+prvtLldpLocManAddrOID OBJECT-TYPE
+    SYNTAX      OBJECT IDENTIFIER
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtLldpLocManAddrEntry 6 }
+
+prvtLldpPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLldpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table of LLDP ports"
+    ::= { prvtLldpObjects 12 }
+
+prvtLldpPortEntry OBJECT-TYPE
+    SYNTAX      PrvtLldpPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry for LLDP ports"
+    INDEX       { prvtLldpCfgPortName }
+    ::= { prvtLldpPortTable 1 }
+
+PrvtLldpPortEntry ::= SEQUENCE {
+    prvtLldpCfgPortName             OCTET STRING,
+    prvtLldpCfgPortRowStatus        RowStatus,
+    prvtLldpCfgPortMode             INTEGER,
+    prvtLldpCfgPortSnmpNotify       TruthValue,
+    prvtLldpAdvBasicPortManAddr     TruthValue,
+    prvtLldpAdvBasicPortDescr       TruthValue,
+    prvtLldpAdvBasicPortSysCap      TruthValue,
+    prvtLldpAdvBasicPortSysDescr    TruthValue,
+    prvtLldpAdvBasicPortSysName     TruthValue,
+    prvtLldpDot1PortVlanId          TruthValue,
+    prvtLldpDot1PortProtoIdentity   TruthValue,
+    prvtLldpDot1PortVlanName        TruthValue,
+    prvtLldpDot1PortProtoVlanId     TruthValue,
+    prvtLldpDot3PortLAG             TruthValue,
+    prvtLldpDot3PortMacPhy          TruthValue,
+    prvtLldpDot3PortMaxFrameSize    TruthValue,
+    prvtLldpDot3PortPowerViaMdi     TruthValue
+}
+
+prvtLldpCfgPortName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface name."
+    ::= { prvtLldpPortEntry 1 }
+
+prvtLldpCfgPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for this interface."
+    ::= { prvtLldpPortEntry 2 }
+
+prvtLldpCfgPortMode OBJECT-TYPE
+    SYNTAX      INTEGER { txOnly(1), rxOnly(2), rxTx(3), disabled(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set port admin status"
+    ::= { prvtLldpPortEntry 3 }
+
+prvtLldpCfgPortSnmpNotify OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure sending of LLDP SNMP notifications"
+    ::= { prvtLldpPortEntry 4 }
+
+prvtLldpAdvBasicPortManAddr OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if LLDP will advertise the management addresses."
+    ::= { prvtLldpPortEntry 5 }
+
+prvtLldpAdvBasicPortDescr OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if the description of the configured interface will be advertised by LLDP."
+    ::= { prvtLldpPortEntry 6 }
+
+prvtLldpAdvBasicPortSysCap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if system capabilities information (bitmap) will be sent to the interface being configured."
+    ::= { prvtLldpPortEntry 7 }
+
+prvtLldpAdvBasicPortSysDescr OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if the system description will be sent to the interface being configured."
+    ::= { prvtLldpPortEntry 8 }
+
+prvtLldpAdvBasicPortSysName OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if the system name will be sent to the interface being configured"
+    ::= { prvtLldpPortEntry 9 }
+
+prvtLldpDot1PortVlanId OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Port VLAN-Id TLVs."
+    ::= { prvtLldpPortEntry 10 }
+
+prvtLldpDot1PortProtoIdentity OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Protocol Identity TLVs."
+    ::= { prvtLldpPortEntry 11 }
+
+prvtLldpDot1PortVlanName OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "VLAN Name TLVs."
+    ::= { prvtLldpPortEntry 12 }
+
+prvtLldpDot1PortProtoVlanId OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "VLAN ID TLVs."
+    ::= { prvtLldpPortEntry 13 }
+
+prvtLldpDot3PortLAG OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Link-aggregation TLVs."
+    ::= { prvtLldpPortEntry 14 }
+
+prvtLldpDot3PortMacPhy OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Mac-phy TLVs."
+    ::= { prvtLldpPortEntry 15 }
+
+prvtLldpDot3PortMaxFrameSize OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Maximum Frame Size TLV."
+    ::= { prvtLldpPortEntry 16 }
+
+prvtLldpDot3PortPowerViaMdi OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Power-via-mdi TLV."
+    ::= { prvtLldpPortEntry 17 }
+
+prvtLldpRemDbPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLldpRemDbPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing remote Db."
+    ::= { prvtLldpObjects 13 }
+
+prvtLldpRemDbPortEntry OBJECT-TYPE
+    SYNTAX      PrvtLldpRemDbPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry for received LLDPDU from given port."
+    INDEX       { prvtLldpRemDbIfNum }
+    ::= { prvtLldpRemDbPortTable 1 }
+
+PrvtLldpRemDbPortEntry ::= SEQUENCE {
+    prvtLldpRemDbIfNum                  OCTET STRING,
+    prvtLldpRemDbPortDataTTL            Integer32,
+    prvtLldpRemDbPortDataAge            Integer32,
+    prvtLldpRemDbPortChasIdSub          INTEGER,
+    prvtLldpRemDbPortChasId             OCTET STRING,
+    prvtLldpRemDbPortIdSub              INTEGER,
+    prvtLldpRemDbPortId                 PhysAddress,
+    prvtLldpRemDbPortSysName            OCTET STRING,
+    prvtLldpRemDbPortSysDescr           OCTET STRING,
+    prvtLldpRemDbPortDescr              OCTET STRING,
+    prvtLldpRemDbPortSysCapSupported    BITS,
+    prvtLldpRemDbPortSysCapEnabled      BITS,
+    prvtLldpRemDbPortManAddr            OCTET STRING
+}
+
+prvtLldpRemDbIfNum OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface name."
+    ::= { prvtLldpRemDbPortEntry 1 }
+
+prvtLldpRemDbPortDataTTL OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote Data TTL"
+    ::= { prvtLldpRemDbPortEntry 2 }
+
+prvtLldpRemDbPortDataAge OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote Data Age"
+    ::= { prvtLldpRemDbPortEntry 3 }
+
+prvtLldpRemDbPortChasIdSub OBJECT-TYPE
+    SYNTAX      INTEGER { chassisComponent(1), interfaceAlias(2), 
+                    portComponent(3), macAddress(4), networkAddress(5), 
+                    interfaceName(6), local(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Subtype of the Remote Chasis"
+    ::= { prvtLldpRemDbPortEntry 4 }
+
+prvtLldpRemDbPortChasId OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..255))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote Chassis ID"
+    ::= { prvtLldpRemDbPortEntry 5 }
+
+prvtLldpRemDbPortIdSub OBJECT-TYPE
+    SYNTAX      INTEGER { interfaceAlias(1), portComponent(2), 
+                    macAddress(3), networkAddress(4), interfaceName(5), 
+                    agentCircuitId(6), local(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Subtype of the Remote Port"
+    ::= { prvtLldpRemDbPortEntry 6 }
+
+prvtLldpRemDbPortId OBJECT-TYPE
+    SYNTAX      PhysAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote Port ID"
+    ::= { prvtLldpRemDbPortEntry 7 }
+
+prvtLldpRemDbPortSysName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote system name."
+    ::= { prvtLldpRemDbPortEntry 8 }
+
+prvtLldpRemDbPortSysDescr OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote system description."
+    ::= { prvtLldpRemDbPortEntry 9 }
+
+prvtLldpRemDbPortDescr OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote port description."
+    ::= { prvtLldpRemDbPortEntry 10 }
+
+prvtLldpRemDbPortSysCapSupported OBJECT-TYPE
+    SYNTAX      BITS { other(0), bridge(2), wlanAccessPoint(3), 
+                    router(4), telephone(5), docsisCableDevice(6), 
+                    stationOnly(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote System supported capabilities."
+    ::= { prvtLldpRemDbPortEntry 11 }
+
+prvtLldpRemDbPortSysCapEnabled OBJECT-TYPE
+    SYNTAX      BITS { other(0), bridge(2), wlanAccessPoint(3), 
+                    router(4), telephone(5), docsisCableDevice(6), 
+                    stationOnly(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote System enabled capabilities."
+    ::= { prvtLldpRemDbPortEntry 12 }
+
+prvtLldpRemDbPortManAddr OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Remote management address."
+    ::= { prvtLldpRemDbPortEntry 13 }
+
+lldpNewRemoteInfo NOTIFICATION-TYPE
+    OBJECTS     { prvtLldpStatsRemTablesInserts, 
+                  prvtLldpStatsRemTablesDeletes, 
+                  prvtLldpStatsRemTablesDrops, 
+                  prvtLldpStatsRemTablesAgeouts }
+    STATUS      current
+    DESCRIPTION 
+        "New Remote Info"
+    ::= { prvtlldpNotifications 1 }
+
+END -- end of module PRVT-LLDP-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-LMGR-MIB b/MIBS/telco-systems/binox/PRVT-LMGR-MIB
new file mode 100644
index 0000000..b35de39
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-LMGR-MIB
@@ -0,0 +1,373 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-LMGR-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-LMGR-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InetAddressType
+        FROM INET-ADDRESS-MIB
+    mpls
+        FROM PRVT-SWITCH-MIB
+    IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+prvtLmgrMIB MODULE-IDENTITY
+    LAST-UPDATED "200606110000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB module for management of the PRVT-LMGR
+         product."
+    REVISION    "200606110000Z"
+    DESCRIPTION 
+        "Initial"
+    ::= { mpls 4 }
+
+
+PrvtLmgrAdminStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The desired administrative state of a Label
+         Manager entity."
+    SYNTAX      INTEGER { up(1), down(2) }
+
+PrvtLmgrOperStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The current operational state of a Label Manager
+         entity. If the operational state is goingDown then
+         a request to activate the Label Manager entity
+         is rejected."
+    SYNTAX      INTEGER { up(1), down(2), goingUp(3), goingDown(4), 
+                    actFailed(5) }
+
+PrvtLmgrPartnerStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The state of a Label Manager partner entity."
+    SYNTAX      INTEGER { initial(0), activating(1), active(2), 
+                    deactivating(3), failedOver(4), failed(5), 
+                    unavailable(6) }
+
+PrvtLmgrIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The index value identifying a Label Manager
+         entity."
+    SYNTAX      Unsigned32
+
+PrvtLmgrControlModes ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The Control Mode of Label Manager."
+    SYNTAX      INTEGER { ordered(1), independent(2) }
+
+prvtLmgrObjects OBJECT IDENTIFIER
+    ::= { prvtLmgrMIB 1 }
+
+prvtLmgrLsrEntityTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLmgrLsrEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry represents an instance of the Label Manager.
+         Each instance is identified by LSR index."
+    ::= { prvtLmgrObjects 2 }
+
+prvtLmgrLsrEntityEntry OBJECT-TYPE
+    SYNTAX      PrvtLmgrLsrEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry represents a Label Manager entity."
+    INDEX       { prvtlmgrLsrEntityLsrIndex }
+    ::= { prvtLmgrLsrEntityTable 1 }
+
+PrvtLmgrLsrEntityEntry ::= SEQUENCE {
+    prvtlmgrLsrEntityLsrIndex       PrvtLmgrIndex,
+    prvtLmgrLsrEntityRowStatus      RowStatus,
+    prvtLmgrLsrEntityAdminStatus    PrvtLmgrAdminStatus,
+    prvtLmgrLsrEntityOperStatus     PrvtLmgrOperStatus,
+    prvtLmgrLsrEntityLsrId          Unsigned32,
+    prvtLmgrLsrEntityTranAddrType   InetAddressType,
+    prvtLmgrLsrEntityTranAddrLen    Unsigned32,
+    prvtLmgrLsrEntityTranAddr       OCTET STRING
+}
+
+prvtlmgrLsrEntityLsrIndex OBJECT-TYPE
+    SYNTAX      PrvtLmgrIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "LSR index for this prvtLmgrLsrEntityEntry. This is the
+         entity index passed in the Label Manager create
+         parameters."
+    ::= { prvtLmgrLsrEntityEntry 1 }
+
+prvtLmgrLsrEntityRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Row status for the Label Manager table entry, used to
+         create and destroy table entries. When
+         prvtLmgrLsrEntityRowStatus is 'active' and
+         prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is
+         active and only these two fields and
+         prvtLmgrLsrEntityMinLsiBuffers can be modified."
+    ::= { prvtLmgrLsrEntityEntry 2 }
+
+prvtLmgrLsrEntityAdminStatus OBJECT-TYPE
+    SYNTAX      PrvtLmgrAdminStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administrative status for Label Manager. When
+         prvtLmgrLsrEntityRowStatus is 'active' and
+         prvtLmgrLsrEntityAdminStatus is 'up' Label Manager is
+         active and only these two fields and
+         prvtLmgrLsrEntityMinLsiBuffers can be modified."
+    ::= { prvtLmgrLsrEntityEntry 3 }
+
+prvtLmgrLsrEntityOperStatus OBJECT-TYPE
+    SYNTAX      PrvtLmgrOperStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current operational status of the Label Manager
+         entity."
+    ::= { prvtLmgrLsrEntityEntry 4 }
+
+prvtLmgrLsrEntityLsrId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An ID that uniquely identifies this LSR within the
+         network.
+         
+         The LSR ID is typically derived from one of the LSR's IP
+         addresses. It may be used for path vector based loop
+         detection if the signaling protocol in use implements
+         that.
+         
+         A value of zero indicates that no LSR ID has been
+         configured. In this case, the signaling protocol stack
+         should construct a unique LSR ID from the other
+         information that is available to it (such as IP
+         addresses). For example, PRVT-CR-LDP and PRVT-RSVP derive
+         the LSR ID by taking the 32 low bits of the following
+         _transport_address_ field, left padding with zeros if
+         necessary.
+         
+         The LSR ID is only used to identify this LSR on IPv4
+         networks. See dcLmgrLsrEntityIpv6TranAddr for equivalent
+         function for use in IPv6 networks."
+    ::= { prvtLmgrLsrEntityEntry 5 }
+
+prvtLmgrLsrEntityTranAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The type of the internetwork layer address used as the
+         transport address. Currently this must be IPv4. See
+         dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
+         field for use in IPv6 networks.
+         
+         The transport address is used by LDP as the source
+         transport address for LDP Hello messages for the global
+         (per-platform) label space.
+         
+         The transport address is used by RSVP as the source
+         address for messages originating on unnumbered interfaces.
+         
+         This object indicates how the value of
+         mplsLdpEntityTransAddr is to be interpreted."
+    ::= { prvtLmgrLsrEntityEntry 6 }
+
+prvtLmgrLsrEntityTranAddrLen OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The length of the internetwork layer address used as the
+         transport address for LDP Hello messages in the global
+         label space and for messages originating on unnumbered
+         interfaces in RSVP. Currently this must be an IPv4
+         address.
+         
+         This object indicates how many elements of the
+         mplsLdpEntityTransAddr array are valid. This value must
+         not exceed _LMGR_LSR_ADDR_LEN_."
+    ::= { prvtLmgrLsrEntityEntry 7 }
+
+prvtLmgrLsrEntityTranAddr OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(4 | 16))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The value of the internetwork layer address used as the
+         transport address for LDP Hello messages in the global
+         label space and for messages originating on unnumbered
+         interfaces in RSVP.
+         
+         This must be an IPv4 address. See
+         dcLmgrLsrEntityIpv6TranAddr, below, for the equivalent
+         field for use in IPv6 networks.
+         
+         If the transport address is not set, then _lsr_id_ must be
+         set to zero. In this case, the transport address and LSR
+         ID are taken from an address on the Interface Information
+         Interface."
+    ::= { prvtLmgrLsrEntityEntry 8 }
+
+prvtLmgrLsrLspXcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLmgrLsrLspXcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry represents an instance of an LSP
+         cross-conect between a single in-segment and a
+         single out-segment."
+    ::= { prvtLmgrObjects 3 }
+
+prvtLmgrLsrLspXcEntry OBJECT-TYPE
+    SYNTAX      PrvtLmgrLsrLspXcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry represents an LSP cross connect."
+    INDEX       { prvtlmgrLsrEntityLsrIndex, prvtLmgrLsrLspXcIndex, 
+                  prvtLmgrLsrLspInSegLabel, prvtLmgrLsrLspOutSegIndex }
+    ::= { prvtLmgrLsrLspXcTable 1 }
+
+PrvtLmgrLsrLspXcEntry ::= SEQUENCE {
+    prvtLmgrLsrLspXcIndex               Unsigned32,
+    prvtLmgrLsrLspInSegIndex            Unsigned32,
+    prvtLmgrLsrLspInSegIfIndex          Unsigned32,
+    prvtLmgrLsrLspInSegLabel            Unsigned32,
+    prvtLmgrLsrLspOutSegIndex           Unsigned32,
+    prvtLmgrLsrLspOutSegIfIndex         Unsigned32,
+    prvtLmgrLsrLspOutSegLabel           Unsigned32,
+    prvtLmgrLsrLspOutSegNextHopAddr     IpAddress
+}
+
+prvtLmgrLsrLspXcIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "XC index for this prvtLmgrLsrLspXc. This is the XC index
+         assigned by Label Manager for the LSP."
+    ::= { prvtLmgrLsrLspXcEntry 2 }
+
+prvtLmgrLsrLspInSegIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index for the in segment. This is the index assigned
+         by Label Manager for the in segment."
+    ::= { prvtLmgrLsrLspXcEntry 3 }
+
+prvtLmgrLsrLspInSegIfIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "If index for the in segment. This is the If index
+         specified on setting up the in segment."
+    ::= { prvtLmgrLsrLspXcEntry 4 }
+
+prvtLmgrLsrLspInSegLabel OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Top label for the in segment. This is the Label assigned
+         by Label Manager Label Library for the in segment."
+    ::= { prvtLmgrLsrLspXcEntry 5 }
+
+prvtLmgrLsrLspOutSegIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index for the out segment. This is the index assigned
+         by Label Manager for the out segment."
+    ::= { prvtLmgrLsrLspXcEntry 6 }
+
+prvtLmgrLsrLspOutSegIfIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Interface Index for the out segment. This is the
+         interface index specified when setting up the out segment."
+    ::= { prvtLmgrLsrLspXcEntry 7 }
+
+prvtLmgrLsrLspOutSegLabel OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Top label for the out segment. This is the label
+         specified by the remote LSR for the out segment."
+    ::= { prvtLmgrLsrLspXcEntry 8 }
+
+prvtLmgrLsrLspOutSegNextHopAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Next hop address for the out segment. This is the address
+         specified by the remote LSR for the out segment."
+    ::= { prvtLmgrLsrLspXcEntry 9 }
+
+END -- end of module PRVT-LMGR-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-LMM-MIB b/MIBS/telco-systems/binox/PRVT-LMM-MIB
new file mode 100644
index 0000000..dfabf0d
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-LMM-MIB
@@ -0,0 +1,426 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-LMM-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-LMM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE
+        FROM SNMPv2-SMI
+    TruthValue
+        FROM SNMPv2-TC;
+
+prvtLmmMIB MODULE-IDENTITY
+    LAST-UPDATED "201110110000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Initial version. This MIB will configure laser monitoring"
+    REVISION    "201110110000Z"
+    DESCRIPTION 
+        "Initial release"
+    ::= { switch 172 }
+
+
+prvtLmmNotifications OBJECT IDENTIFIER
+    ::= { prvtLmmMIB 0 }
+
+prvtLmmObjects OBJECT IDENTIFIER
+    ::= { prvtLmmMIB 1 }
+
+prvtLmmShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/disable laser monitoring"
+    ::= { prvtLmmObjects 1 }
+
+prvtLmmDebug OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/Disable laser monitoring"
+    ::= { prvtLmmObjects 2 }
+
+prvtLmmPeriod OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the monitoring interval (sec)."
+    ::= { prvtLmmObjects 3 }
+
+prvtLmmTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/Disable sending SNMP traps when thresholds are crossed"
+    ::= { prvtLmmObjects 4 }
+
+prvtLmmLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/Disable alert notification logging when thresholds are crossed"
+    ::= { prvtLmmObjects 5 }
+
+prvtLmmLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/Disable LED-alert notifications when thresholds are crossed"
+    ::= { prvtLmmObjects 6 }
+
+prvtLmmTemperatureHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-128..128)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the low threshold value for global temperature (-128 up to 128).
+         prvtLmmTemperatureHighThreshold must be higher than prvtLmmTemperatureLowThreshold"
+    ::= { prvtLmmObjects 7 }
+
+prvtLmmTemperatureLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-128..128)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the low threshold value for global temperature (-128 up to 128).
+         prvtLmmTemperatureHighThreshold must be higher than prvtLmmTemperatureLowThreshold"
+    ::= { prvtLmmObjects 8 }
+
+prvtLmmRxPowerLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the low threshold value for global RX-power (-40 up to 8)
+         prvtLmmRxPowerHighThreshold must be higher than prvtLmmRxPowerLowThreshold"
+    ::= { prvtLmmObjects 9 }
+
+prvtLmmRxPowerHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the high threshold value for global RX-power (-40 up to 8)
+         prvtLmmRxPowerHighThreshold must be higher than prvtLmmRxPowerLowThreshold"
+    ::= { prvtLmmObjects 10 }
+
+prvtLmmTxPowerLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the low threshold value for global RX-power (-40 up to 8)
+         prvtLmmTxPowerHighThreshold must be higher than prvtLmmTxPowerLowThreshold"
+    ::= { prvtLmmObjects 11 }
+
+prvtLmmTxPowerHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the high threshold value for global RX-power (-40 up to 8)
+         prvtLmmTxPowerHighThreshold must be higher than prvtLmmTxPowerLowThreshold"
+    ::= { prvtLmmObjects 12 }
+
+prvtLmmInterfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLmmInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Lmm configuration per ethernet port"
+    ::= { prvtLmmObjects 13 }
+
+prvtLmmInterfaceEntry OBJECT-TYPE
+    SYNTAX      PrvtLmmInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Stack table entry"
+    INDEX       { ifIndex }
+    ::= { prvtLmmInterfaceTable 1 }
+
+PrvtLmmInterfaceEntry ::= SEQUENCE {
+    prvtLmmInterfaceShutdown                TruthValue,
+    prvtLmmInterfaceTempLowThreshold        Integer32,
+    prvtLmmInterfaceTempHighThreshold       Integer32,
+    prvtLmmInterfaceTempValue               Integer32,
+    prvtLmmInterfaceTempThresholdLo         Integer32,
+    prvtLmmInterfaceTempThresholdHi         Integer32,
+    prvtLmmInterfaceTempTestState           TruthValue,
+    prvtLmmInterfaceRxPowerLowThreshold     Integer32,
+    prvtLmmInterfaceRxPowerHighThreshold    Integer32,
+    prvtLmmInterfaceRxPowerValue            Integer32,
+    prvtLmmInterfaceRxPowerThresholdRxLo    Integer32,
+    prvtLmmInterfaceRxPowerThresholdRxHi    Integer32,
+    prvtLmmInterfaceRxPowerTestState        TruthValue,
+    prvtLmmInterfaceTxPowerLowThreshold     Integer32,
+    prvtLmmInterfaceTxPowerHighThreshold    Integer32,
+    prvtLmmInterfaceTxPowerValue            Integer32,
+    prvtLmmInterfaceTxPowerThresholdTxLo    Integer32,
+    prvtLmmInterfaceTxPowerThresholdTxHi    Integer32,
+    prvtLmmInterfaceTxPowerTestState        TruthValue,
+    prvtLmmInterfaceOperStatus              TruthValue
+}
+
+prvtLmmInterfaceShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/Disable laser monitoring on port"
+    ::= { prvtLmmInterfaceEntry 1 }
+
+prvtLmmInterfaceTempLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-128..128)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the low threshold value for port temperature"
+    ::= { prvtLmmInterfaceEntry 2 }
+
+prvtLmmInterfaceTempHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-128..128)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the high threshold value for port temperature.
+         Value of prvtLmmInterfaceTempHighThreshold must be greater than 
+         prvtLmmInterfaceTempLowThreshold"
+    ::= { prvtLmmInterfaceEntry 3 }
+
+prvtLmmInterfaceTempValue OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Display laser Temperature current value"
+    ::= { prvtLmmInterfaceEntry 4 }
+
+prvtLmmInterfaceTempThresholdLo OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The thresholds read from hardware or set by user"
+    ::= { prvtLmmInterfaceEntry 5 }
+
+prvtLmmInterfaceTempThresholdHi OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The thresholds read from hardware or set by user"
+    ::= { prvtLmmInterfaceEntry 6 }
+
+prvtLmmInterfaceTempTestState OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The state test"
+    ::= { prvtLmmInterfaceEntry 7 }
+
+prvtLmmInterfaceRxPowerLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the low threshold value for port RX-power."
+    ::= { prvtLmmInterfaceEntry 8 }
+
+prvtLmmInterfaceRxPowerHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the high threshold value for port RX-power.
+         Value of prvtLmmInterfaceRxPowerHighThreshold must be greater than
+         prvtLmmInterfaceRxPowerLowThreshold"
+    ::= { prvtLmmInterfaceEntry 9 }
+
+prvtLmmInterfaceRxPowerValue OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Display laser Rx Power current value"
+    ::= { prvtLmmInterfaceEntry 10 }
+
+prvtLmmInterfaceRxPowerThresholdRxLo OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The thresholds read from hardware or set by user"
+    ::= { prvtLmmInterfaceEntry 11 }
+
+prvtLmmInterfaceRxPowerThresholdRxHi OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The thresholds read from hardware or set by user"
+    ::= { prvtLmmInterfaceEntry 12 }
+
+prvtLmmInterfaceRxPowerTestState OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The state test"
+    ::= { prvtLmmInterfaceEntry 13 }
+
+prvtLmmInterfaceTxPowerLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the low threshold value for port TX-power"
+    ::= { prvtLmmInterfaceEntry 14 }
+
+prvtLmmInterfaceTxPowerHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..8)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify the high threshold value for port TX-power
+         Value of prvtLmmInterfaceTxPowerHighThreshold must be greater than
+         prvtLmmInterfaceTxPowerLowThreshold"
+    ::= { prvtLmmInterfaceEntry 15 }
+
+prvtLmmInterfaceTxPowerValue OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Display laser Tx Power current value"
+    ::= { prvtLmmInterfaceEntry 16 }
+
+prvtLmmInterfaceTxPowerThresholdTxLo OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The thresholds read from hardware or set by user"
+    ::= { prvtLmmInterfaceEntry 17 }
+
+prvtLmmInterfaceTxPowerThresholdTxHi OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The thresholds read from hardware or set by user"
+    ::= { prvtLmmInterfaceEntry 18 }
+
+prvtLmmInterfaceTxPowerTestState OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The state test"
+    ::= { prvtLmmInterfaceEntry 19 }
+
+prvtLmmInterfaceOperStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Operational status"
+    ::= { prvtLmmInterfaceEntry 20 }
+
+prvtLmmTemperatureThresholdCrossed NOTIFICATION-TYPE
+    OBJECTS     { prvtLmmInterfaceTempValue, 
+                  prvtLmmInterfaceTempThresholdHi, 
+                  prvtLmmInterfaceTempThresholdLo }
+    STATUS      current
+    DESCRIPTION 
+        "The prvtLmmTemperatureThresholdCrossed shall be generated 
+         when prvtLmmInterfaceTempValue rises above prvtLmmInterfaceTempThresholdHi
+         or falls below prvtLmmInterfaceTempThresholdLo. Also the 
+         notification shall be generated when prvtLmmInterfaceTempValue
+         returns to the normal range between prvtLmmInterfaceTempThresholdHi 
+         and prvtLmmInterfaceTempThresholdLo."
+    ::= { prvtLmmNotifications 1 }
+
+prvtLmmTxPowerThresholdCrossed NOTIFICATION-TYPE
+    OBJECTS     { prvtLmmInterfaceTxPowerValue, 
+                  prvtLmmInterfaceTxPowerThresholdTxHi, 
+                  prvtLmmInterfaceTxPowerThresholdTxLo }
+    STATUS      current
+    DESCRIPTION 
+        "The prvtLmmTxPowerThresholdCrossed shall be generated 
+         when prvtLmmInterfaceTxPowerValue rises above prvtLmmInterfaceTxPowerThresholdTxHi
+         or falls below prvtLmmInterfaceTxPowerThresholdTxLo. Also the 
+         notification shall be generated when prvtLmmInterfaceTxPowerValue
+         returns to the normal range between prvtLmmInterfaceTxPowerThresholdTxHi 
+         and prvtLmmInterfaceTxPowerThresholdTxLo."
+    ::= { prvtLmmNotifications 2 }
+
+prvtLmmRxPowerThresholdCrossed NOTIFICATION-TYPE
+    OBJECTS     { prvtLmmInterfaceRxPowerValue, 
+                  prvtLmmInterfaceRxPowerThresholdRxHi, 
+                  prvtLmmInterfaceRxPowerThresholdRxLo }
+    STATUS      current
+    DESCRIPTION 
+        "The prvtLmmRxPowerThresholdCrossed shall be generated 
+         when prvtLmmInterfaceRxPowerValue rises above prvtLmmInterfaceRxPowerThresholdRxHi
+         or falls below prvtLmmInterfaceRxPowerThresholdRxLo. Also the 
+         notification shall be generated when prvtLmmInterfaceRxPowerValue
+         returns to the normal range between prvtLmmInterfaceRxPowerThresholdRxHi 
+         and prvtLmmInterfaceRxPowerThresholdRxLo."
+    ::= { prvtLmmNotifications 3 }
+
+END -- end of module PRVT-LMM-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-LOAD-BALANCE-MIB b/MIBS/telco-systems/binox/PRVT-LOAD-BALANCE-MIB
new file mode 100644
index 0000000..e8735f0
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-LOAD-BALANCE-MIB
@@ -0,0 +1,452 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-LOAD-BALANCE-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-LOAD-BALANCE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    Ipv6Address
+        FROM IPV6-TC
+    ipSwitch
+        FROM PRVT-SWITCH-MIB
+    IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    MacAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp
+        FROM SNMPv2-TC;
+
+prvtLoadBalMIB MODULE-IDENTITY
+    LAST-UPDATED "201012200000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The private MIB module for management of load balancing functionality."
+    REVISION    "201012200000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { ipSwitch 7 }
+
+
+PrvtLoadBalMtxIndexTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A valid matrix group (load balancing application) index."
+    SYNTAX      Unsigned32 (1..8)
+
+prvtLoadBalObjects OBJECT IDENTIFIER
+    ::= { prvtLoadBalMIB 1 }
+
+prvtLoadBalDistributionMode OBJECT-TYPE
+    SYNTAX      INTEGER { disabled(1), general(2), perPortUserNetwork(3), 
+                    globalNetwork(4), globalUser(5) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The global distribution mode to use."
+    ::= { prvtLoadBalObjects 1 }
+
+prvtLoadBalIpV6DistributionMode OBJECT-TYPE
+    SYNTAX      INTEGER { disabled(0), enabled(1) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specifies whether IPv6 distribution mode should be enabled/disabled."
+    ::= { prvtLoadBalObjects 2 }
+
+prvtLoadBalSpiDistributionMode OBJECT-TYPE
+    SYNTAX      INTEGER { disabled(0), enabled(1) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specifies whether SPI distribution mode should be enabled/disabled."
+    ::= { prvtLoadBalObjects 3 }
+
+prvtLoadBalMaxAvailSize OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The maximum number of elements available in the matrix according to the
+         configured global distribution mode and included protocols."
+    ::= { prvtLoadBalObjects 5 }
+
+prvtLoadBalMtxTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLoadBalMtxEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The matrix table."
+    ::= { prvtLoadBalObjects 6 }
+
+prvtLoadBalMtxEntry OBJECT-TYPE
+    SYNTAX      PrvtLoadBalMtxEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtLoadBalMtxTable."
+    INDEX       { prvtLoadBalMtxIndex }
+    ::= { prvtLoadBalMtxTable 1 }
+
+PrvtLoadBalMtxEntry ::= SEQUENCE {
+    prvtLoadBalMtxIndex         PrvtLoadBalMtxIndexTC,
+    prvtLoadBalMtxBuckets       OCTET STRING,
+    prvtLoadBalMtxSignature     OCTET STRING
+}
+
+prvtLoadBalMtxIndex OBJECT-TYPE
+    SYNTAX      PrvtLoadBalMtxIndexTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a matrix (load-balancing application) entry."
+    ::= { prvtLoadBalMtxEntry 1 }
+
+prvtLoadBalMtxBuckets OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..1024))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the buckets of the load-balancing matrix.
+         Each nibble specifies the CPU blade (1-12) that should handle
+         traffic belonging to the corresponding ACL rule. The high nibbles
+         corresponds to even ACL rules, the lower nibbles to odd ACL rules.
+         The number of valid nibbles is equal to prvtLoadBalMaxAvailSize."
+    ::= { prvtLoadBalMtxEntry 2 }
+
+prvtLoadBalMtxSignature OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The MD5 signature of prvtLoadBalMtxBuckets."
+    ::= { prvtLoadBalMtxEntry 3 }
+
+prvtLoadBalIfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLoadBalIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains port specific configuration."
+    ::= { prvtLoadBalObjects 7 }
+
+prvtLoadBalIfEntry OBJECT-TYPE
+    SYNTAX      PrvtLoadBalIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtLoadBalIfTable."
+    INDEX       { prvtLoadBalIfId }
+    ::= { prvtLoadBalIfTable 1 }
+
+PrvtLoadBalIfEntry ::= SEQUENCE {
+    prvtLoadBalIfId             Unsigned32,
+    prvtLoadBalIfRowStatus      RowStatus,
+    prvtLoadBalIfMode           INTEGER,
+    prvtLoadBalIfMatrixIndex    PrvtLoadBalMtxIndexTC
+}
+
+prvtLoadBalIfId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..16)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The port number to which this row applies."
+    ::= { prvtLoadBalIfEntry 1 }
+
+prvtLoadBalIfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Row status of this table."
+    ::= { prvtLoadBalIfEntry 2 }
+
+prvtLoadBalIfMode OBJECT-TYPE
+    SYNTAX      INTEGER { network(1), user(2), sync(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mode in which this interface should function."
+    ::= { prvtLoadBalIfEntry 3 }
+
+prvtLoadBalIfMatrixIndex OBJECT-TYPE
+    SYNTAX      PrvtLoadBalMtxIndexTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The matrix index (prvtLoadBalMtxIndex) assigned to this interface."
+    ::= { prvtLoadBalIfEntry 4 }
+
+prvtLoadBalUserNtwkSrcIpv4Mask OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The user/network source IPv4 mask."
+    ::= { prvtLoadBalObjects 8 }
+
+prvtLoadBalUserNtwkDstIpv4Mask OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The user/network destination IPv4 mask."
+    ::= { prvtLoadBalObjects 9 }
+
+prvtLoadBalUserNtwkSrcIpv6Mask OBJECT-TYPE
+    SYNTAX      Ipv6Address
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The user/network source IPv6 mask."
+    ::= { prvtLoadBalObjects 10 }
+
+prvtLoadBalUserNtwkDstIpv6Mask OBJECT-TYPE
+    SYNTAX      Ipv6Address
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The user/network destination IPv6 mask."
+    ::= { prvtLoadBalObjects 11 }
+
+prvtLoadBalSpiMask OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The SPI mask."
+    ::= { prvtLoadBalObjects 12 }
+
+prvtLoadBalGeneralSrcIpv4Mask OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The general source IPv4 mask."
+    ::= { prvtLoadBalObjects 13 }
+
+prvtLoadBalGeneralDstIpv4Mask OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The general destination IPv4 mask."
+    ::= { prvtLoadBalObjects 14 }
+
+prvtLoadBalGeneralSrcIpv6Mask OBJECT-TYPE
+    SYNTAX      Ipv6Address
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The general source IPv6 mask."
+    ::= { prvtLoadBalObjects 15 }
+
+prvtLoadBalGeneralDstIpv6Mask OBJECT-TYPE
+    SYNTAX      Ipv6Address
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The general destination IPv6 mask."
+    ::= { prvtLoadBalObjects 16 }
+
+prvtLoadBalLastUpdateTime OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value of sysUpTime when the configuration was last updated."
+    ::= { prvtLoadBalObjects 17 }
+
+prvtLoadBalApplyConfiguration OBJECT-TYPE
+    SYNTAX      INTEGER { noAction(0), apply(1) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Setting this object to the value 'apply' results in the configuration being
+         applied to the device.
+         Reads from the object always return 'noAction'."
+    ::= { prvtLoadBalObjects 18 }
+
+prvtLoadBalBladeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLoadBalBladeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains blade specific configuration."
+    ::= { prvtLoadBalObjects 19 }
+
+prvtLoadBalBladeEntry OBJECT-TYPE
+    SYNTAX      PrvtLoadBalBladeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtLoadBalBladeTable."
+    INDEX       { prvtLoadBalBladeIndex }
+    ::= { prvtLoadBalBladeTable 1 }
+
+PrvtLoadBalBladeEntry ::= SEQUENCE {
+    prvtLoadBalBladeIndex       Unsigned32,
+    prvtLoadBalBladeMacAddr     MacAddress
+}
+
+prvtLoadBalBladeIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..12)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The index of the blade to which this row applies."
+    ::= { prvtLoadBalBladeEntry 1 }
+
+prvtLoadBalBladeMacAddr OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address for this blade."
+    ::= { prvtLoadBalBladeEntry 3 }
+
+prvtLoadBalBaseIpAddr OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The base IP address."
+    ::= { prvtLoadBalObjects 20 }
+
+prvtLoadBalBaseIpAddrMask OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The mask associated with prvtCpMatrixBaseIpAddr."
+    ::= { prvtLoadBalObjects 21 }
+
+prvtLoadBalAdminPass OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Admin user password."
+    ::= { prvtLoadBalObjects 22 }
+
+prvtLoadBalQsfpPortsMode OBJECT-TYPE
+    SYNTAX      INTEGER { mode4x10g(1), mode40g(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Gets to this object return the mode of the front panel QSFP ports.
+         Sets to this object will configure the mode of these ports.
+         Note that changing the mode requires the device to be reloaded to
+         manufacturing defaults.  Thus, sets to this object that change the
+         object's value will result in the device reloading to the default
+         configuration."
+    ::= { prvtLoadBalObjects 23 }
+
+prvtLoadBalIfVlanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtLoadBalIfVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains port specific configuration."
+    ::= { prvtLoadBalObjects 24 }
+
+prvtLoadBalIfVlanEntry OBJECT-TYPE
+    SYNTAX      PrvtLoadBalIfVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtLoadBalIfVlanTable."
+    INDEX       { prvtLoadBalIfId, prvtLoadBalVlanId }
+    ::= { prvtLoadBalIfVlanTable 1 }
+
+PrvtLoadBalIfVlanEntry ::= SEQUENCE {
+    prvtLoadBalVlanId               Unsigned32,
+    prvtLoadBalIfVlanRowStatus      RowStatus,
+    prvtLoadBalIfVlanMode           INTEGER,
+    prvtLoadBalIfVlanMatrixIndex    PrvtLoadBalMtxIndexTC
+}
+
+prvtLoadBalVlanId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4096)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The port number and vlan to which this row applies."
+    ::= { prvtLoadBalIfVlanEntry 1 }
+
+prvtLoadBalIfVlanRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Row status of this table."
+    ::= { prvtLoadBalIfVlanEntry 2 }
+
+prvtLoadBalIfVlanMode OBJECT-TYPE
+    SYNTAX      INTEGER { network(1), user(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mode in which this interface and vlan should function."
+    ::= { prvtLoadBalIfVlanEntry 3 }
+
+prvtLoadBalIfVlanMatrixIndex OBJECT-TYPE
+    SYNTAX      PrvtLoadBalMtxIndexTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The matrix index (prvtLoadBalMtxIndex) assigned to this interface and vlan."
+    ::= { prvtLoadBalIfVlanEntry 4 }
+
+prvtLoadBalLoseLessMode OBJECT-TYPE
+    SYNTAX      INTEGER { mode1to64(0), mode1to32(1), mode1to16(2), 
+                    mode1to8(3), mode1to4(4), mode1to2(5), mode1(6), 
+                    mode2(7), mode4(8), mode8(9) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The lose-less mode to use."
+    ::= { prvtLoadBalObjects 25 }
+
+END -- end of module PRVT-LOAD-BALANCE-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-MAC-SECURITY-MIB b/MIBS/telco-systems/binox/PRVT-MAC-SECURITY-MIB
new file mode 100644
index 0000000..a363ef6
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-MAC-SECURITY-MIB
@@ -0,0 +1,280 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-MAC-SECURITY-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-MAC-SECURITY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    DisplayString, RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtMacSecurityMIB MODULE-IDENTITY
+    LAST-UPDATED "201003260000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB module for managing port MAC security."
+    REVISION    "201003260000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 109 }
+
+
+PrvtMacSecLrnProfileNameType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "30t"
+    STATUS      current
+    DESCRIPTION 
+        "The name of a learning profile."
+    SYNTAX      OCTET STRING (SIZE(1..30))
+
+PrvtMacSecWatermarkActionType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Action to perform upon reaching the watermark MAC count value."
+    SYNTAX      INTEGER { log(3), trap(4) }
+
+PrvtMacSecSecurityActionType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Action to perform upon reaching the maximum MAC count value."
+    SYNTAX      INTEGER { operationalShutdown(1), trap(2) }
+
+PrvtMacSecPolicyType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Type of policy a MAC security profile may have."
+    SYNTAX      INTEGER { portSecurity(1), portLimit(2) }
+
+PrvtMacSecEntryStateType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The state of a port with regards to MAC count."
+    SYNTAX      INTEGER { noViolation(1), watermarkReached(2), 
+                    maxMacCountReached(3), errorState(4) }
+
+prvtMacSecNotifications OBJECT IDENTIFIER
+    ::= { prvtMacSecurityMIB 0 }
+
+prvtMacSecObjects OBJECT IDENTIFIER
+    ::= { prvtMacSecurityMIB 1 }
+
+prvtMacSecLrnProfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtMacSecLrnProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of learning profiles.
+         A learning profile specifies the thresholds, and actions to take with regards to the number of MAC addresses learned."
+    ::= { prvtMacSecObjects 1 }
+
+prvtMacSecLrnProfEntry OBJECT-TYPE
+    SYNTAX      PrvtMacSecLrnProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtMacSecLrnProfTable."
+    INDEX       { prvtMacSecLrnProfName }
+    ::= { prvtMacSecLrnProfTable 1 }
+
+PrvtMacSecLrnProfEntry ::= SEQUENCE {
+    prvtMacSecLrnProfName               PrvtMacSecLrnProfileNameType,
+    prvtMacSecLrnProfRowStatus          RowStatus,
+    prvtMacSecLrnProfPolicy             PrvtMacSecPolicyType,
+    prvtMacSecLrnProfMaxMacCount        Unsigned32,
+    prvtMacSecLrnProfIgnoreFiltered     TruthValue,
+    prvtMacSecLrnProfAction             PrvtMacSecSecurityActionType,
+    prvtMacSecLrnProfWatermarkAction    PrvtMacSecWatermarkActionType,
+    prvtMacSecLrnProfWatermarkCount     Unsigned32
+}
+
+prvtMacSecLrnProfName OBJECT-TYPE
+    SYNTAX      PrvtMacSecLrnProfileNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The name uniquely identifying the learning profile."
+    ::= { prvtMacSecLrnProfEntry 1 }
+
+prvtMacSecLrnProfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this instance."
+    ::= { prvtMacSecLrnProfEntry 2 }
+
+prvtMacSecLrnProfPolicy OBJECT-TYPE
+    SYNTAX      PrvtMacSecPolicyType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The type of MAC security policy that this learning profile follows."
+    ::= { prvtMacSecLrnProfEntry 3 }
+
+prvtMacSecLrnProfMaxMacCount OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4096)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Maximum allowed number of MAC addresses to be learned.
+         This value should be greater than or equal to the watermark MAC count, prvtMacSecLrnProfWatermarkCount."
+    ::= { prvtMacSecLrnProfEntry 4 }
+
+prvtMacSecLrnProfIgnoreFiltered OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "When the violation limit is reached, do not learn violating MACs as filtered, but simply ignore them."
+    ::= { prvtMacSecLrnProfEntry 5 }
+
+prvtMacSecLrnProfAction OBJECT-TYPE
+    SYNTAX      PrvtMacSecSecurityActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action to perform upon reaching the prvtMacSecLrnProfMaxMacCount value."
+    ::= { prvtMacSecLrnProfEntry 6 }
+
+prvtMacSecLrnProfWatermarkAction OBJECT-TYPE
+    SYNTAX      PrvtMacSecWatermarkActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action to perform upon reaching the prvtMacSecLrnProfWatermarkCount value."
+    ::= { prvtMacSecLrnProfEntry 7 }
+
+prvtMacSecLrnProfWatermarkCount OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4096)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sets the watermark at which the action specified in prvtMacSecLrnProfWatermarkAction will be taken.
+         This value should be less than the maximum MAC count, prvtMacSecLrnProfMaxMacCount."
+    ::= { prvtMacSecLrnProfEntry 8 }
+
+prvtMacSecIfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtMacSecIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of profiles that have been assigned to each interface."
+    ::= { prvtMacSecObjects 2 }
+
+prvtMacSecIfEntry OBJECT-TYPE
+    SYNTAX      PrvtMacSecIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry belonging to prvtMacSecIfTable."
+    INDEX       { prvtMacSecIfName }
+    ::= { prvtMacSecIfTable 1 }
+
+PrvtMacSecIfEntry ::= SEQUENCE {
+    prvtMacSecIfName            OCTET STRING,
+    prvtMacSecIfRowStatus       RowStatus,
+    prvtMacSecIfProfile         PrvtMacSecLrnProfileNameType,
+    prvtMacSecIfCurrMacCount    Unsigned32,
+    prvtMacSecIfState           PrvtMacSecEntryStateType
+}
+
+prvtMacSecIfName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Interface name."
+    ::= { prvtMacSecIfEntry 1 }
+
+prvtMacSecIfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this instance."
+    ::= { prvtMacSecIfEntry 2 }
+
+prvtMacSecIfProfile OBJECT-TYPE
+    SYNTAX      PrvtMacSecLrnProfileNameType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The name of a learning profile from prvtMacSecLrnProfTable."
+    ::= { prvtMacSecIfEntry 3 }
+
+prvtMacSecIfCurrMacCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current MAC count for this entry."
+    ::= { prvtMacSecIfEntry 4 }
+
+prvtMacSecIfState OBJECT-TYPE
+    SYNTAX      PrvtMacSecEntryStateType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current state of this entry."
+    ::= { prvtMacSecIfEntry 5 }
+
+portSecurityWmarkViolation NOTIFICATION-TYPE
+    OBJECTS     { prvtMacSecIfName }
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtMacSecNotifications 1 }
+
+portSecurityViolation NOTIFICATION-TYPE
+    OBJECTS     { prvtMacSecIfName }
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtMacSecNotifications 2 }
+
+END -- end of module PRVT-MAC-SECURITY-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-MPLS-IF-MIB b/MIBS/telco-systems/binox/PRVT-MPLS-IF-MIB
new file mode 100644
index 0000000..7419051
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-MPLS-IF-MIB
@@ -0,0 +1,283 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-MPLS-IF-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-MPLS-IF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    mpls
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, OBJECT-TYPE
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtMplsIfMIB MODULE-IDENTITY
+    LAST-UPDATED "201108050000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This module includes configuration parameters for MPLS and RSVP interface specific parameters."
+    REVISION    "201108050000Z"
+    DESCRIPTION 
+        "Added ifaceMplsRsvpEgrLabelUsage, ifaceMplsLdpEgrLabelUsage, ifaceMplsSignalCapabilities."
+    REVISION    "201004280000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { mpls 6 }
+
+
+PrvtMplsIpAddressMask ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d/1d"
+    STATUS      current
+    DESCRIPTION 
+        "An IPv4 address and mask represented as a 5 octet string.
+         First four octets are the IP address. The fifth octet is the IP mask."
+    SYNTAX      OCTET STRING (SIZE(5))
+
+EgressLabelUsageType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Possible egress label usage values."
+    SYNTAX      INTEGER { global(0), implicitNull(1), explicitNull(2) }
+
+prvtMplsIfMIBObjects OBJECT IDENTIFIER
+    ::= { prvtMplsIfMIB 1 }
+
+prvtMplsIfaceObjs OBJECT IDENTIFIER
+    ::= { prvtMplsIfMIBObjects 1 }
+
+prvtMplsIfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtMplsIfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains object for configuring MPLS and LDP interface specific parameters."
+    ::= { prvtMplsIfaceObjs 1 }
+
+prvtMplsIfaceEntry OBJECT-TYPE
+    SYNTAX      PrvtMplsIfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtMplsIfaceTable."
+    INDEX       { ifIndex }
+    ::= { prvtMplsIfaceTable 1 }
+
+PrvtMplsIfaceEntry ::= SEQUENCE {
+    ifaceMplsRowStatus              RowStatus,
+    ifaceMplsEnable                 TruthValue,
+    ifaceMplsPHPEnable              TruthValue,
+    ifaceMplsLdpHelloHoldTimer      Integer32,
+    ifaceMplsLdpKeepaliveHoldTimer  Integer32,
+    ifaceMplsRsvpEgrLabelUsage      EgressLabelUsageType,
+    ifaceMplsLdpEgrLabelUsage       EgressLabelUsageType,
+    ifaceMplsSignalCapabilities     BITS
+}
+
+ifaceMplsRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this interface."
+    ::= { prvtMplsIfaceEntry 1 }
+
+ifaceMplsEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable or disable MPLS on this interface."
+    ::= { prvtMplsIfaceEntry 2 }
+
+ifaceMplsPHPEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable or disable Penultimate Hop Popping on this interface."
+    ::= { prvtMplsIfaceEntry 3 }
+
+ifaceMplsLdpHelloHoldTimer OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The LDP Hello Hold Time for this interface."
+    ::= { prvtMplsIfaceEntry 4 }
+
+ifaceMplsLdpKeepaliveHoldTimer OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The LDP Keep-alive Hold Time for this interface."
+    ::= { prvtMplsIfaceEntry 5 }
+
+ifaceMplsRsvpEgrLabelUsage OBJECT-TYPE
+    SYNTAX      EgressLabelUsageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The egress label usage for RSVP."
+    ::= { prvtMplsIfaceEntry 7 }
+
+ifaceMplsLdpEgrLabelUsage OBJECT-TYPE
+    SYNTAX      EgressLabelUsageType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The egress label usage for LDP."
+    ::= { prvtMplsIfaceEntry 8 }
+
+ifaceMplsSignalCapabilities OBJECT-TYPE
+    SYNTAX      BITS { sigCapsRsvp(0), sigCapsLdp(1), sigCapsData(7) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A bit map specifying the signaling capabilities that this MPLS
+         interface is to have.
+         Setting the bit sigCapsRsvp will enable RSVP signaling.
+         Setting the bit sigCapsLdp will enable LDP signaling.
+         The bit sigCapsData must always be set."
+    ::= { prvtMplsIfaceEntry 9 }
+
+prvtMplsRouteObjs OBJECT IDENTIFIER
+    ::= { prvtMplsIfMIBObjects 2 }
+
+prvtMplsRouteProtocolTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtMplsRouteProtocolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains the configuration of the egress and ingress routes for LDP label
+         packets."
+    ::= { prvtMplsRouteObjs 1 }
+
+prvtMplsRouteProtocolEntry OBJECT-TYPE
+    SYNTAX      PrvtMplsRouteProtocolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in the table represents the configuration of a particular route type for ingress
+         or egress."
+    INDEX       { prvtMplsRouteProtocolDirection, 
+                  prvtMplsRouteProtocolType }
+    ::= { prvtMplsRouteProtocolTable 1 }
+
+PrvtMplsRouteProtocolEntry ::= SEQUENCE {
+    prvtMplsRouteProtocolDirection  INTEGER,
+    prvtMplsRouteProtocolType       INTEGER,
+    prvtMplsRouteProtocolRowStatus  RowStatus
+}
+
+prvtMplsRouteProtocolDirection OBJECT-TYPE
+    SYNTAX      INTEGER { ingress(1), egress(2) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The direction of the route that will be used to receive or send LDP packets."
+    ::= { prvtMplsRouteProtocolEntry 1 }
+
+prvtMplsRouteProtocolType OBJECT-TYPE
+    SYNTAX      INTEGER { bgp(1), connected(2), isisl1(3), isisl2(4), 
+                    kernel(5), ospf(6), rip(7), static(8) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type of the route which will be used to send or receive LDP packets."
+    ::= { prvtMplsRouteProtocolEntry 2 }
+
+prvtMplsRouteProtocolRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is used to create an entry in the table."
+    ::= { prvtMplsRouteProtocolEntry 3 }
+
+prvtMplsRouteAddressTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtMplsRouteAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains the egress and ingress routes for LDP label
+         packets."
+    ::= { prvtMplsRouteObjs 2 }
+
+prvtMplsRouteAddressEntry OBJECT-TYPE
+    SYNTAX      PrvtMplsRouteAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtMplsRouteAddressTable."
+    INDEX       { prvtMplsRouteProtocolDirection, 
+                  prvtMplsRouteAddressIpAddrMask }
+    ::= { prvtMplsRouteAddressTable 1 }
+
+PrvtMplsRouteAddressEntry ::= SEQUENCE {
+    prvtMplsRouteAddressIpAddrMask  PrvtMplsIpAddressMask,
+    prvtMplsRouteAddressRowStatus   RowStatus
+}
+
+prvtMplsRouteAddressIpAddrMask OBJECT-TYPE
+    SYNTAX      PrvtMplsIpAddressMask
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The IP prefix of the route that will be used to send or receive LDP packets."
+    ::= { prvtMplsRouteAddressEntry 2 }
+
+prvtMplsRouteAddressRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This is object is used to create an entry in the table."
+    ::= { prvtMplsRouteAddressEntry 4 }
+
+END -- end of module PRVT-MPLS-IF-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB b/MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB
new file mode 100644
index 0000000..f936c51
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-MPLS-LDP-MIB
@@ -0,0 +1,898 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-MPLS-LDP-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-MPLS-LDP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InetAddressType
+        FROM INET-ADDRESS-MIB
+    prvtcrldpPmIndex, prvtcrldpSigIndex
+        FROM PRVT-CR-LDP-MIB
+    mpls
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtMplsLdpMIB MODULE-IDENTITY
+    LAST-UPDATED "200911260000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This MIB contains managed object definitions for the
+         'Multiprotocol Label Switching, Label Distribution
+         Protocol, LDP'."
+    REVISION    "200911260000Z"
+    DESCRIPTION 
+        "Created MplsLdpIdentifier TC."
+    REVISION    "200606030000Z"
+    DESCRIPTION 
+        "Initial version published as part of RFC 3815."
+    ::= { mpls 1 }
+
+
+MplsRetentionMode ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The label retention mode which specifies whether
+         an LSR maintains a label binding for a FEC
+         learned from a neighbor that is not its next hop
+         for the FEC.
+         
+         If the value is conservative(1) then advertised
+         label mappings are retained only if they will be
+         used to forward packets, i.e., if label came from
+         a valid next hop.
+         
+         If the value is liberal(2) then all advertised
+         label mappings are retained whether they are from
+         a valid next hop or not."
+    REFERENCE   
+        "Multiprotocol Label Switching Architecture,
+         RFC3031.
+         
+         LDP Specification, RFC3036, Section 2.6.2."
+    SYNTAX      INTEGER { conservative(1), liberal(2) }
+
+MplsLdpLabelType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The Layer 2 label types which are defined for MPLS
+         LDP and/or CR-LDP are generic(1), atm(2), or
+         frameRelay(3)."
+    SYNTAX      INTEGER { generic(1), atm(2), frameRelay(3) }
+
+MplsLabelDistributionMethod ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The label distribution method which is also called
+         the label advertisement mode [RFC3036].
+         Each interface on an LSR is configured to operate
+         in either Downstream Unsolicited or Downstream
+         on Demand."
+    REFERENCE   
+        "Multiprotocol Label Switching Architecture,
+         RFC3031.
+         
+         LDP Specification, RFC3036, Section 2.6.3."
+    SYNTAX      INTEGER { downstreamOnDemand(1), 
+                    downstreamUnsolicited(2) }
+
+PrvtMplsLdpIdentifier ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "255a"
+    STATUS      current
+    DESCRIPTION 
+        "The LDP identifier is used to identify a
+         Label Switching Router (LSR) label space.
+         
+         The format is an ASCII representation of
+         a string in the form A.B.C.D:S,
+         where A,B,C,D identify the LSR and must
+         be a globally unique value, such as a 32-bit
+         router ID assigned to the LSR,
+         and S identifies a specific label space
+         within the LSR."
+    SYNTAX      OCTET STRING (SIZE(10..20))
+
+MplsIndexType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "This is an octet string that can be used as a table
+         index in cases where a large addressable space is
+         required such as on an LSR where many applications
+         may be provisioning labels.
+         
+         Note that the string containing the single octet with
+         the value 0x00 is a reserved value used to represent
+         special cases. When this TEXTUAL-CONVENTION is used
+         as the SYNTAX of an object, the DESCRIPTION clause
+         MUST specify if this special value is valid and if so
+         what the special meaning is.
+         
+         In systems that provide write access to the MPLS-LSR-STD
+         MIB, mplsIndexType SHOULD be used as a simple multi-digit
+         integer encoded as an octet string.
+         No further overloading of the meaning of an index SHOULD
+         be made.
+         
+         In systems that do not offer write access to the MPLS-LSR-STD
+         MIB, the mplsIndexType may contain implicit formatting that is
+         specific to the implementation to convey additional
+         information such as interface index, physical card or
+         device, or application id. The interpretation of this
+         additional formatting is implementation dependent and
+         not covered in this document. Such formatting MUST
+         NOT impact the basic functionality of read-only access
+         to the MPLS-LSR-STD MIB by management applications that are
+         not aware of the formatting rules.
+         
+         The MIB is implemented in PRVT-LMGR with write-access.
+         As specified above, PRVT-LMGR treats the index values of this type
+         as simple integer types.
+         
+         In order to reduce the effort required to upgrade from earlier
+         versions of the MIB, and to simplify management of static LSPs,
+         this type is mapped on to an Integer32 in this implementation."
+    SYNTAX      Integer32 (0..2147483647)
+
+PrvtMplsLdpInetAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x "
+    STATUS      current
+    DESCRIPTION 
+        "Same as InetAddress from INET-ADDRESS-MIB except restricted
+         to IPv4 or IPv6 addresses."
+    SYNTAX      OCTET STRING (SIZE(4 | 16))
+
+PrvtMplsLdpTimeStamp ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Same as TimeStamp from SNMPv2-TC, but has syntax Integer32"
+    SYNTAX      Integer32
+
+PrvtMplsLdpTimeInterval ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Same as TimeInterval from SNMPv2-TC, but has syntax Integer32"
+    SYNTAX      Integer32
+
+mplsLdpObjects OBJECT IDENTIFIER
+    ::= { prvtMplsLdpMIB 1 }
+
+mplsLdpEntityTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains information about the
+         MPLS Label Distribution Protocol Entities which
+         exist on this Label Switching Router (LSR)
+         or Label Edge Router (LER)."
+    ::= { mplsLdpObjects 1 }
+
+mplsLdpEntityEntry OBJECT-TYPE
+    SYNTAX      MplsLdpEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table represents an LDP entity.
+         An entry can be created by a network administrator
+         or by an SNMP agent as instructed by LDP."
+    INDEX       { prvtcrldpSigIndex, mplsLdpEntityLdpId, 
+                  mplsLdpEntityIndex }
+    ::= { mplsLdpEntityTable 1 }
+
+MplsLdpEntityEntry ::= SEQUENCE {
+    mplsLdpEntityLdpId                  PrvtMplsLdpIdentifier,
+    mplsLdpEntityIndex                  Unsigned32,
+    mplsLdpEntityRowStatus              RowStatus,
+    mplsLdpEntityAdminStatus            INTEGER,
+    mplsLdpEntityOperStatus             INTEGER,
+    mplsLdpEntityMaxPduLength           Unsigned32,
+    mplsLdpEntityKeepAliveHoldTimer     Unsigned32,
+    mplsLdpEntityHelloHoldTimer         Unsigned32,
+    mplsLdpEntityTargetPeer             TruthValue,
+    mplsLdpEntityTargetPeerAddrType     InetAddressType,
+    mplsLdpEntityTargetPeerAddr         PrvtMplsLdpInetAddress
+}
+
+mplsLdpEntityLdpId OBJECT-TYPE
+    SYNTAX      PrvtMplsLdpIdentifier
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The LDP identifier. The first four octets encode an IP
+         address assigned to the LSR, and the last two octets
+         identify a specific label space within the LSR."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section on LDP Identifiers."
+    ::= { mplsLdpEntityEntry 1 }
+
+mplsLdpEntityIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This index is used as a secondary index to uniquely
+         identify this row.
+         
+         A secondary index (this object) is meaningful to some
+         but not all, LDP implementations. For example
+         an LDP implementation which uses PPP would
+         use this index to differentiate PPP sub-links.
+         
+         Another way to use this index is to give this the
+         value of ifIndex. However, this is dependant
+         on the implementation.
+         
+         This field is deprecated in the following tables provided
+         by PRVT-CR-LDP Session Controller.
+         
+         - mplsLdpEntityTable.
+         - mplsLdpPeerTable.
+         
+         In these tables the value of the Entity Index will always
+         be filled in to be 1."
+    ::= { mplsLdpEntityEntry 2 }
+
+mplsLdpEntityRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An object that allows entries in this table to
+         be created and deleted using the
+         RowStatus convention.
+         
+         Once the 'mplsLdpEntityAdminStatus' object has
+         the value of 'up' and this object has the value
+         of 'active' then the Entity will atttempt to
+         contact an LDP Peer. If the value of this object
+         is changed to 'notInService', then the Entity looses
+         contact with the LDP Peer and all information related
+         to that Peer must be removed from the MIB. This has
+         the same effect as changing 'mplsLdpEntityAdminStatus'
+         from 'enable' to 'disable'.
+         
+         When this object is set to 'active' and the value of
+         the 'mplsLdpEntityAdminStatus' is 'enable' then
+         this Entity will attempt to contact the Peer and
+         establish new sessions."
+    ::= { mplsLdpEntityEntry 3 }
+
+mplsLdpEntityAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { enable(1), disable(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The administrative status of this LDP Entity.
+         If this object is changed from 'enable' to 'disable'
+         and this entity has already attempted to establish
+         contact with a Peer (which implies that the
+         'mplsLdpEntityRowStatus' object has been set to
+         'active'), then all contact with that
+         Peer is lost and all information from that Peer
+         needs to be removed from the MIB. (This implies
+         that the network management subsystem should clean
+         up any related entry in the mplsLdpPeerTable. This
+         further implies that a 'tear-down' for that session
+         is issued and the session and all information related
+         to that session cease to exist).
+         
+         At this point the user is able to change values
+         which are related to this entity.
+         
+         When the admin status is set back to 'enable', then
+         this Entity will attempt to establish a new session
+         with the Peer."
+    ::= { mplsLdpEntityEntry 4 }
+
+mplsLdpEntityOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), enabled(2), disabled(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational status of this LDP Entity.
+         
+         The value of unknown(1) indicates that the
+         operational status cannot be determined at
+         this time. The value of unknown should be
+         a transient condition before changing
+         to enabled(2) or disabled(3)."
+    ::= { mplsLdpEntityEntry 5 }
+
+mplsLdpEntityMaxPduLength OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The maximum PDU Length that is sent in
+         the Common Session Parameters of an Initialization
+         Message. According to the LDP Specification [RFC3036]
+         a value of 255 or less specifies the
+         default maximum length of 4096 octets.
+         
+         The receiving LSR MUST calculate the maximum PDU
+         length for the session by using the smaller of its and
+         its peer's proposals for Max PDU Length."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section 3.5.3.
+         Initialization Message."
+    ::= { mplsLdpEntityEntry 6 }
+
+mplsLdpEntityKeepAliveHoldTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The 16-bit integer value which is the proposed keep
+         alive hold timer for this LDP Entity."
+    ::= { mplsLdpEntityEntry 7 }
+
+mplsLdpEntityHelloHoldTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The 16-bit integer value which is the proposed Hello
+         hold timer for this LDP Entity. The Hello Hold time
+         in seconds.
+         
+         An LSR maintains a record of Hellos received
+         from potential peers. This object represents
+         the Hold Time in the Common Hello Parameters TLV of
+         the Hello Message.
+         
+         A value of 0 is a default value and should be
+         interpretted in conjunction with the
+         mplsLdpEntityTargetPeer object.
+         
+         If the value of this object is 0: if the value of the
+         mplsLdpEntityTargetPeer object is false(2), then this
+         specifies that the Hold Time's actual default value is
+         15 seconds (i.e., the default Hold time for Link Hellos
+         is 15 seconds). Otherwise if the value of the
+         mplsLdpEntityTargetPeer object is true(1), then this
+         specifies that the Hold Time's actual default value is
+         45 seconds (i.e., the default Hold time for Targeted
+         Hellos is 45 seconds).
+         
+         A value of 65535 means infinite (i.e., wait forever).
+         
+         All other values represent the amount of time in
+         seconds to wait for a Hello Message. Setting the
+         hold time to a value smaller than 15 is not
+         recommended, although not forbidden according
+         to RFC3036.
+         
+         For auto-created entities that use the global label space
+         (and therefore might correspond to more than one
+         adjacency over more than one interface), this value will
+         only be meaningful if all interfaces that correspond to
+         this entity are configured to use the same hello hold
+         time, since this property can be configured on a per
+         interface basis.
+         
+         If the interfaces have differing configurations, the
+         value returned on a MIB Get will be 0."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section 3.5.2.,
+         Hello Message."
+    ::= { mplsLdpEntityEntry 8 }
+
+mplsLdpEntityTargetPeer OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If this LDP entity uses targeted peer then set
+         this to true."
+    ::= { mplsLdpEntityEntry 9 }
+
+mplsLdpEntityTargetPeerAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The type of the internetwork layer address used for
+         the Extended Discovery. This object indicates how
+         the value of mplsLdpEntityTargetPeerAddr is to
+         be interpreted."
+    ::= { mplsLdpEntityEntry 10 }
+
+mplsLdpEntityTargetPeerAddr OBJECT-TYPE
+    SYNTAX      PrvtMplsLdpInetAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The value of the internetwork layer address
+         used for the Extended Discovery. The value of
+         mplsLdpEntityTargetPeerAddrType specifies how
+         this address is to be interpreted."
+    ::= { mplsLdpEntityEntry 11 }
+
+mplsLdpPeerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpPeerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about LDP peers known by Entities in
+         the mplsLdpEntityTable. The information in this table
+         is based on information from the Entity-Peer interaction
+         during session initialization but is not appropriate
+         for the mplsLdpSessionTable, because objects in this
+         table may or may not be used in session establishment."
+    ::= { mplsLdpObjects 2 }
+
+mplsLdpPeerEntry OBJECT-TYPE
+    SYNTAX      MplsLdpPeerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a single Peer which is related
+         to a Session. NOTE: this table is used to
+         augment the mplsLdpSessionTable."
+    INDEX       { prvtcrldpPmIndex, mplsLdpEntityLdpId, 
+                  mplsLdpEntityIndex, mplsLdpPeerLdpId }
+    ::= { mplsLdpPeerTable 1 }
+
+MplsLdpPeerEntry ::= SEQUENCE {
+    mplsLdpPeerLdpId                PrvtMplsLdpIdentifier,
+    mplsLdpPeerLabelDistMethod      MplsLabelDistributionMethod,
+    mplsLdpPeerTransportAddrType    InetAddressType,
+    mplsLdpPeerTransportAddr        PrvtMplsLdpInetAddress
+}
+
+mplsLdpPeerLdpId OBJECT-TYPE
+    SYNTAX      PrvtMplsLdpIdentifier
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The LDP identifier of this LDP Peer."
+    ::= { mplsLdpPeerEntry 1 }
+
+mplsLdpPeerLabelDistMethod OBJECT-TYPE
+    SYNTAX      MplsLabelDistributionMethod
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "For any given LDP session, the method of
+         label distribution must be specified."
+    ::= { mplsLdpPeerEntry 2 }
+
+mplsLdpPeerTransportAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The type of the Internet address for the
+         mplsLdpPeerTransportAddr object. The LDP
+         specification describes this as being either
+         an IPv4 Transport Address or IPv6 Transport
+         Address which is used in opening the LDP session's
+         TCP connection, or if the optional TLV is not
+         present, then this is the IPv4/IPv6 source
+         address for the UPD packet carrying the Hellos.
+         
+         This object specifies how the value of the
+         mplsLdpPeerTransportAddr object should be
+         interpreted."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section 2.5.2
+         Transport Connection Establishment and
+         Section 3.5.2.1 Hello Message Procedures."
+    ::= { mplsLdpPeerEntry 3 }
+
+mplsLdpPeerTransportAddr OBJECT-TYPE
+    SYNTAX      PrvtMplsLdpInetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Internet address advertised by the peer
+         in the Hello Message or the Hello source address.
+         
+         The type of this address is specified by the
+         value of the mplsLdpPeerTransportAddrType
+         object."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section 2.5.2
+         Transport Connection Establishment and
+         Section 3.5.2.1 Hello Message Procedures."
+    ::= { mplsLdpPeerEntry 4 }
+
+mplsLdpSessionTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table of Sessions between the LDP Entities
+         and LDP Peers. Each row in this table
+         represents a single session."
+    ::= { mplsLdpObjects 3 }
+
+mplsLdpSessionEntry OBJECT-TYPE
+    SYNTAX      MplsLdpSessionEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table represents information on a
+         single session between an LDP Entity and LDP Peer.
+         The information contained in a row is read-only.
+         
+         Please note: the Path Vector Limit for the
+         Session is the value which is configured in
+         the corresponding mplsLdpEntityEntry. The
+         Peer's Path Vector Limit is in the
+         mplsLdpPeerPathVectorLimit object in the
+         mplsLdpPeerTable.
+         
+         Values which may differ from those configured are
+         noted in the objects of this table. A value will
+         differ if it was negotiated between the
+         Entity and the Peer. Values may or may not
+         be negotiated. For example, if the values
+         are the same then no negotiation takes place.
+         If they are negotiated, then they may differ."
+    INDEX       { prvtcrldpSigIndex, mplsLdpEntityLdpId, 
+                  mplsLdpEntityIndex, mplsLdpPeerLdpId }
+    ::= { mplsLdpSessionTable 1 }
+
+MplsLdpSessionEntry ::= SEQUENCE {
+    mplsLdpSessionStateLastChange               PrvtMplsLdpTimeStamp,
+    mplsLdpSessionState                         INTEGER,
+    mplsLdpSessionKeepAliveHoldTimeRemaining    PrvtMplsLdpTimeInterval,
+    mplsLdpSessionKeepAliveTime                 Unsigned32,
+    mplsLdpSessionMaxPduLength                  Unsigned32,
+    mplsLdpSessionConfiguredHoldTime            Unsigned32,
+    mplsLdpSessionPeerHoldTime                  Unsigned32,
+    mplsLdpSessionHoldTimeInUse                 Unsigned32
+}
+
+mplsLdpSessionStateLastChange OBJECT-TYPE
+    SYNTAX      PrvtMplsLdpTimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value of sysUpTime at the time this
+         Session entered its current state as
+         denoted by the mplsLdpSessionState
+         object."
+    ::= { mplsLdpSessionEntry 1 }
+
+mplsLdpSessionState OBJECT-TYPE
+    SYNTAX      INTEGER { nonexistent(1), initialized(2), openrec(3), 
+                    opensent(4), operational(5) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current state of the session, all of the
+         states 1 - 5 are based on the state machine
+         for session negotiation behavior."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section 2.5.4,
+         Initialization State Machine."
+    ::= { mplsLdpSessionEntry 2 }
+
+mplsLdpSessionKeepAliveHoldTimeRemaining OBJECT-TYPE
+    SYNTAX      PrvtMplsLdpTimeInterval
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The keep alive hold time remaining for this session in
+         units of hundredths of a second. This interval will
+         change when the 'next' Keep Alive message which
+         corresponds to this session is received. A value of zero
+         indicates that the keep alive hold timer is not running."
+    ::= { mplsLdpSessionEntry 3 }
+
+mplsLdpSessionKeepAliveTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The negotiated KeepAlive Time which
+         represents the amount of seconds between
+         keep alive messages. The
+         mplsLdpEntityKeepAliveHoldTimer
+         related to this Session is the
+         value that was proposed as the
+         KeepAlive Time for this session.
+         
+         This value is negotiated during
+         session initialization between
+         the entity's proposed value
+         (i.e., the value configured in
+         mplsLdpEntityKeepAliveHoldTimer)
+         and the peer's proposed
+         KeepAlive Hold Timer value.
+         This value is the smaller
+         of the two proposed values."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section 3.5.3,
+         Initialization Message."
+    ::= { mplsLdpSessionEntry 4 }
+
+mplsLdpSessionMaxPduLength OBJECT-TYPE
+    SYNTAX      Unsigned32
+    UNITS       "octets"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value of maximum allowable length for LDP PDUs for
+         this session. This value may have been negotiated
+         during the Session Initialization. This object is
+         related to the mplsLdpEntityMaxPduLength object. The
+         mplsLdpEntityMaxPduLength object specifies the requested
+         LDP PDU length, and this object reflects the negotiated
+         LDP PDU length between the Entity and
+         the Peer."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section 3.5.3,
+         Initialization Message."
+    ::= { mplsLdpSessionEntry 5 }
+
+mplsLdpSessionConfiguredHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The locally configured keepalive hold time for this
+         session, in seconds. Note that the value of this field
+         reflects configuration at the time of session
+         initialization; this may differ from the configuration
+         that would apply to a new session, if configuration has
+         changed since this session was initialized."
+    ::= { mplsLdpSessionEntry 6 }
+
+mplsLdpSessionPeerHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The peer's advertised keepalive hold time for this session
+         in seconds. Note that the value of this field reflects
+         the peer's configuration at the time of session
+         initialization; this may differ from the configuration
+         that would apply to a new session, if the peer's
+         configuration has changed since this session was
+         initialized."
+    ::= { mplsLdpSessionEntry 7 }
+
+mplsLdpSessionHoldTimeInUse OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The keepalive hold time that is currently in use for this
+         session, in seconds."
+    ::= { mplsLdpSessionEntry 8 }
+
+mplsLdpHelloAdjacencyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpHelloAdjacencyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table of Hello Adjacencies for Sessions."
+    ::= { mplsLdpObjects 4 }
+
+mplsLdpHelloAdjacencyEntry OBJECT-TYPE
+    SYNTAX      MplsLdpHelloAdjacencyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each row represents a single LDP Hello Adjacency.
+         An LDP Session can have one or more Hello adjacencies."
+    INDEX       { prvtcrldpSigIndex, mplsLdpEntityLdpId, 
+                  mplsLdpEntityIndex, mplsLdpPeerLdpId, 
+                  mplsLdpHelloAdjacencyIndex }
+    ::= { mplsLdpHelloAdjacencyTable 1 }
+
+MplsLdpHelloAdjacencyEntry ::= SEQUENCE {
+    mplsLdpHelloAdjacencyIndex                  Unsigned32,
+    mplsLdpHelloAdjacencyHoldTimeRemaining      PrvtMplsLdpTimeInterval,
+    mplsLdpHelloAdjacencyHoldTime               Unsigned32,
+    mplsLdpHelloAdjacencyType                   INTEGER,
+    mplsLdpHelloAdjacencyConfiguredHoldTime     Unsigned32,
+    mplsLdpHelloAdjacencyPeerHoldTime           Unsigned32
+}
+
+mplsLdpHelloAdjacencyIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An identifier for this specific adjacency."
+    ::= { mplsLdpHelloAdjacencyEntry 1 }
+
+mplsLdpHelloAdjacencyHoldTimeRemaining OBJECT-TYPE
+    SYNTAX      PrvtMplsLdpTimeInterval
+    UNITS       "seconds"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "If the value of this object is 65535,
+         this means that the hold time is infinite
+         (i.e., wait forever).
+         
+         Otherwise, the time remaining for
+         this Hello Adjacency to receive its
+         next Hello Message.
+         
+         This interval will change when the 'next'
+         Hello Message which corresponds to this
+         Hello Adjacency is received unless it
+         is infinite."
+    ::= { mplsLdpHelloAdjacencyEntry 2 }
+
+mplsLdpHelloAdjacencyHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Hello hold time which is negotiated between
+         the Entity and the Peer. The entity associated
+         with this Hello Adjacency issues a proposed
+         Hello Hold Time value in the
+         mplsLdpEntityHelloHoldTimer object. The peer
+         also proposes a value and this object represents
+         the negotiated value.
+         
+         A value of 0 means the default,
+         which is 15 seconds for Link Hellos
+         and 45 seconds for Targeted Hellos.
+         A value of 65535 indicates an
+         infinite hold time."
+    REFERENCE   
+        "RFC3036, LDP Specification, Section 3.5.2 Hello Message"
+    ::= { mplsLdpHelloAdjacencyEntry 3 }
+
+mplsLdpHelloAdjacencyType OBJECT-TYPE
+    SYNTAX      INTEGER { link(1), targeted(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This adjacency is the result of a 'link'
+         hello if the value of this object is link(1).
+         Otherwise, it is a result of a 'targeted'
+         hello, targeted(2)."
+    ::= { mplsLdpHelloAdjacencyEntry 4 }
+
+mplsLdpHelloAdjacencyConfiguredHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The locally configured hello hold time for this adjacency,
+         in seconds."
+    ::= { mplsLdpHelloAdjacencyEntry 5 }
+
+mplsLdpHelloAdjacencyPeerHoldTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The peer's advertised hello hold time for this adjacency,
+         in seconds."
+    ::= { mplsLdpHelloAdjacencyEntry 6 }
+
+mplsLdpSessionPeerAddrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsLdpSessionPeerAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table 'extends' the mplsLdpSessionTable.
+         This table is used to store Label Address Information
+         from Label Address Messages received by this LSR from
+         Peers. This table is read-only and should be updated
+         when Label Withdraw Address Messages are received, i.e.,
+         Rows should be deleted as appropriate.
+         
+         NOTE: since more than one address may be contained
+         in a Label Address Message, this table 'sparse augments',
+         the mplsLdpSessionTable's information."
+    ::= { mplsLdpObjects 5 }
+
+mplsLdpSessionPeerAddrEntry OBJECT-TYPE
+    SYNTAX      MplsLdpSessionPeerAddrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table represents information on
+         a session's single next hop address which was
+         advertised in an Address Message from the LDP peer.
+         The information contained in a row is read-only."
+    INDEX       { prvtcrldpPmIndex, mplsLdpEntityLdpId, 
+                  mplsLdpEntityIndex, mplsLdpPeerLdpId, 
+                  mplsLdpSessionPeerAddrIndex }
+    ::= { mplsLdpSessionPeerAddrTable 1 }
+
+MplsLdpSessionPeerAddrEntry ::= SEQUENCE {
+    mplsLdpSessionPeerAddrIndex         Unsigned32,
+    mplsLdpSessionPeerNextHopAddrType   InetAddressType,
+    mplsLdpSessionPeerNextHopAddr       PrvtMplsLdpInetAddress
+}
+
+mplsLdpSessionPeerAddrIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index which uniquely identifies this entry within
+         a given session."
+    ::= { mplsLdpSessionPeerAddrEntry 1 }
+
+mplsLdpSessionPeerNextHopAddrType OBJECT-TYPE
+    SYNTAX      InetAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The internetwork layer address type of this Next Hop
+         Address as specified in the Label Address Message
+         associated with this Session. The value of this
+         object indicates how to interpret the value of
+         mplsLdpSessionPeerNextHopAddr."
+    ::= { mplsLdpSessionPeerAddrEntry 2 }
+
+mplsLdpSessionPeerNextHopAddr OBJECT-TYPE
+    SYNTAX      PrvtMplsLdpInetAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The next hop address. The type of this address
+         is specified by the value of the
+         mplsLdpSessionPeerNextHopAddrType."
+    REFERENCE   
+        "RFC3036, Section 2.7. LDP Identifiers
+         and Next Hop Addresses"
+    ::= { mplsLdpSessionPeerAddrEntry 3 }
+
+END -- end of module PRVT-MPLS-LDP-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-MPLS-TE-MIB b/MIBS/telco-systems/binox/PRVT-MPLS-TE-MIB
new file mode 100644
index 0000000..236ce6d
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-MPLS-TE-MIB
@@ -0,0 +1,2861 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-MPLS-TE-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-MPLS-TE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    mpls
+        FROM PRVT-SWITCH-MIB
+    prvtMplsTeMibEntityIndex
+        FROM PRVT-TEMIB-ENTITY-MIB
+    Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, 
+    OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtMplsTeMIB MODULE-IDENTITY
+    LAST-UPDATED "200902100000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This MIB module contains managed object definitions
+         for MPLS Traffic Engineering (TE) as defined in:
+         Extensions to RSVP for LSP Tunnels, Awduche et al,
+         Internet Draft <draft-ietf-mpls-rsvp-lsp-tunnel-
+         07.txt>, August 2000; Constraint-Based LSP Setup
+         using LDP, B. Jamoussi, Internet Draft <draft-ietf-
+         mpls-cr-ldp-04.txt>, July 2000; Requirements for
+         Traffic Engineering Over MPLS, Awduche, D., J.
+         Malcolm, J., Agogbua, J., O'Dell, M., J. McManus,
+         <rfc2702.txt>, September 1999."
+    REVISION    "200902100000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { mpls 2 }
+
+
+MplsPathIndexOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A unique identifier used to identify a specific
+         path used by a tunnel. A value of 0 (zero) means
+         that no path is in use."
+    SYNTAX      Unsigned32 (0..4294967295)
+
+MplsTunnelInstanceIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The tunnel entry with instance index 0
+         should refer to the configured tunnel
+         interface (if one exists).
+         
+         Values greater than 0, but less than or
+         equal to 65535, should be used to indicate
+         signaled (or backup) tunnel LSP instances.
+         For tunnel LSPs signaled using RSVP,
+         this value should correspond to the
+         RSVP LSP ID used for the RSVP-TE
+         LSP.
+         
+         Values greater than 65535 apply to FRR
+         detour instances."
+    SYNTAX      Unsigned32 (0..4294967295)
+
+TeHopAddressAS ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Represents a two or four octet AS number.
+         The AS number is represented in network byte
+         order (MSB first). A two-octet AS number has
+         the two MSB octets set to zero."
+    REFERENCE   
+        "Textual Conventions for Internet Network
+         Addresses, [RFC3291]."
+    SYNTAX      Unsigned32
+
+TeHopAddressUnnum ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Represents an unnumbered interface:
+         
+         octets contents encoding
+         1-4 unnumbered interface network-byte order
+         
+         The corresponding TeHopAddressType value is
+         unnum(4)."
+    SYNTAX      Unsigned32
+
+TeHopAddress ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Denotes a generic Tunnel hop address,
+         that is, the address of a node which
+         an LSP traverses, including the source
+         and destination nodes. An address may be
+         very concrete, for example, an IPv4 host
+         address (i.e., with prefix length 32);
+         if this IPv4 address is an interface
+         address, then that particular interface
+         must be traversed. An address may also
+         specify an 'abstract node', for example,
+         an IPv4 address with prefix length
+         less than 32, in which case, the LSP
+         can traverse any node whose address
+         falls in that range. An address may
+         also specify an Autonomous System (AS),
+         in which case the LSP can traverse any
+         node that falls within that AS.
+         
+         A TeHopAddress value is always interpreted within
+         the context of an TeHopAddressType value. Every
+         usage of the TeHopAddress TEXTUAL-CONVENTION
+         is required to specify the TeHopAddressType object
+         which provides the context. It is suggested that
+         the TeHopAddressType object is logically registered
+         before the object(s) which use the TeHopAddress
+         TEXTUAL-CONVENTION if they appear in the
+         same logical row.
+         
+         The value of a TeHopAddress object must always be
+         consistent with the value of the associated
+         TeHopAddressType object. Attempts to set a
+         TeHopAddress object to a value which is
+         inconsistent with the associated TeHopAddressType
+         must fail with an inconsistentValue error."
+    SYNTAX      OCTET STRING (SIZE(0..32))
+
+TeHopAddressType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "A value that represents a type of address for a
+         Traffic Engineered (TE) Tunnel hop.
+         
+         unknown(0) An unknown address type. This value
+         MUST be used if the value of the
+         corresponding TeHopAddress object is a
+         zero-length string. It may also be
+         used to indicate a TeHopAddress which
+         is not in one of the formats defined
+         below.
+         
+         ipv4(1) An IPv4 network address as defined by
+         the InetAddressIPv4 TEXTUAL-CONVENTION
+         [RFC3291].
+         
+         ipv6(2) A global IPv6 address as defined by
+         the InetAddressIPv6 TEXTUAL-CONVENTION
+         [RFC3291].
+         
+         asnumber(3) An Autonomous System (AS) number as
+         defined by the TeHopAddressAS
+         TEXTUAL-CONVENTION.
+         
+         unnum(4) An unnumbered interface index as
+         defined by the TeHopAddressUnnum
+         TEXTUAL-CONVENTION.
+         
+         lspid(5) An LSP ID for TE Tunnels
+         (RFC3212) as defined by the
+         MplsLSPID TEXTUAL-CONVENTION.
+         -- private Addition
+         unnumv6(6) An unnumbered IPv6 interface index as
+         defined by the TeHopAddressUnnumV6
+         TEXTUAL-CONVENTION.
+         
+         
+         -- End private Addition
+         
+         Each definition of a concrete TeHopAddressType
+         value must be accompanied by a definition
+         of a TEXTUAL-CONVENTION for use with that
+         TeHopAddress.
+         
+         To support future extensions, the TeHopAddressType
+         TEXTUAL-CONVENTION SHOULD NOT be sub-typed in
+         object type definitions. It MAY be sub-typed in
+         compliance statements in order to require only a
+         subset of these address types for a compliant
+         implementation.
+         
+         Implementations must ensure that TeHopAddressType
+         objects and any dependent objects
+         (e.g., TeHopAddress objects) are consistent.
+         An inconsistentValue error must be generated
+         if an attempt to change a TeHopAddressType
+         object would, for example, lead to an
+         undefined TeHopAddress value that is
+         not defined herein. In particular,
+         TeHopAddressType/TeHopAddress pairs
+         must be changed together if the address
+         type changes (e.g., from ipv6(2) to ipv4(1))."
+    REFERENCE   
+        "TEXTUAL-CONVENTIONs for Internet Network
+         Addresses, RFC3291.
+         
+         Constraint-Based LSP Setup using LDP,
+         [RFC3212]"
+    SYNTAX      INTEGER { unknown(0), ipv4(1), ipv6(2), asnumber(3), 
+                    unnum(4), lspid(5), unnumv6(6) }
+
+MplsOwner ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "This object indicates the local network
+         management subsystem that originally created
+         the object(s) in question. The values of
+         this enumeration are defined as follows:
+         
+         unknown(1) - the local network management
+         subsystem cannot discern which
+         component created the object.
+         
+         other(2) - the local network management
+         subsystem is able to discern which component
+         created the object, but the component is not
+         listed within the following choices,
+         e.g., command line interface (cli).
+         
+         snmp(3) - The Simple Network Management Protocol
+         was used to configure this object initially.
+         
+         ldp(4) - The Label Distribution Protocol was
+         used to configure this object initially.
+         
+         crldp(5) - The Constraint-Based Label Distribution
+         Protocol was used to configure this object
+         initially.
+         
+         rsvpTe(6) - The Resource Reservation Protocol was
+         used to configure this object initially.
+         
+         policyAgent(7) - A policy agent (perhaps in
+         combination with one of the above protocols) was
+         used to configure this object initially.
+         
+         mplsVpn(8) - This label was configured for MPLS/BGP VPNs
+         as defined in RFC2547.
+         
+         cli(9) - The CLI was used to configure this object initially.
+         
+         dynamic(10) - The tunnel has been created dynamically.
+         
+         An object created by any of the above choices
+         MAY be modified or destroyed by the same or a
+         different choice."
+    SYNTAX      INTEGER { unknown(1), other(2), snmp(3), ldp(4), 
+                    crldp(5), rsvpTe(6), policyAgent(7), mplsVpn(8), 
+                    cli(9), dynamic(10) }
+
+MplsPathIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A unique value to index (by Path number) an
+         entry in a table."
+    SYNTAX      Unsigned32 (1..4294967295)
+
+MplsTunnelAffinity ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Describes the configured 32-bit Include-any,
+         include-all, or exclude-all constraint for
+         constraint-based link selection."
+    REFERENCE   
+        "RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         RFC3209, Section 4.7.4."
+    SYNTAX      Unsigned32 (0..4294967295)
+
+MplsLSPID ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "A unique identifier within an MPLS network that is
+         assigned to each LSP. This is assigned at the head
+         end of the LSP and can be used by all LSRs
+         to identify this LSP. This value is piggybacked by
+         the signaling protocol when this LSP is signaled
+         within the network. This identifier can then be
+         used at each LSR to identify which labels are
+         being swapped to other labels for this LSP. This
+         object can also be used to disambiguate LSPs that
+         share the same RSVP sessions between the same
+         source and destination.
+         
+         For LSPs established using CR-LDP, the LSPID is
+         composed of the ingress LSR Router ID (or any of
+         its own IPv4 addresses) and a locally unique
+         CR-LSP ID to that LSR. The first two bytes carry
+         the CR-LSPID, and the remaining 4 bytes carry
+         the Router ID. The LSPID is useful in network
+         management, in CR-LSP repair, and in using
+         an already established CR-LSP as a hop in
+         an ER-TLV.
+         
+         For LSPs signaled using RSVP-TE, the LSP ID is
+         defined as a 16-bit (2 byte) identifier used
+         in the SENDER_TEMPLATE and the FILTER_SPEC
+         that can be changed to allow a sender to
+         share resources with itself. The length of this
+         object should only be 2 or 6 bytes. If the length
+         of this octet string is 2 bytes, then it must
+         identify an RSVP-TE LSPID, or it is 6 bytes,
+         it must contain a CR-LDP LSPID."
+    REFERENCE   
+        "RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         [RFC3209].
+         
+         Constraint-Based LSP Setup using LDP,
+         [RFC3212]."
+    SYNTAX      OCTET STRING (SIZE(2 | 6 | 32))
+
+MplsBurstSize ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The number of octets of MPLS data that the stream
+         may send back-to-back without concern for policing.
+         The value of zero indicates that an implementation
+         does not support Burst Size."
+    SYNTAX      Unsigned32 (0..4294967295)
+
+MplsBitRate ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "If the value of this object is greater than zero,
+         then this represents the bandwidth of this MPLS
+         interface (or Label Switched Path) in units of
+         '1,000 bits per second'.
+         
+         The value, when greater than zero, represents the
+         bandwidth of this MPLS interface (rounded to the
+         nearest 1,000) in units of 1,000 bits per second.
+         If the bandwidth of the MPLS interface is between
+         ((n * 1000) - 500) and ((n * 1000) + 499), the value
+         of this object is n, such that n > 0.
+         
+         If the value of this object is 0 (zero), this
+         means that the traffic over this MPLS interface is
+         considered to be best effort."
+    SYNTAX      Unsigned32 (0..4294967295)
+
+MplsExtendedTunnelIdOctetType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d"
+    STATUS      current
+    DESCRIPTION 
+        "A unique identifier for an MPLS Tunnel. This
+         represents an IPv4 address of the ingress or egress
+         LSR for the tunnel. This value is derived from the
+         Extended Tunnel Id in RSVP or the Ingress Router ID
+         for CR-LDP. Currently, only octet string sizes of
+         4 are supported. String sizes of 16 are reserved for
+         future use."
+    REFERENCE   
+        "RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         [RFC3209].
+         
+         Constraint-Based LSP Setup using LDP, [RFC3212]."
+    SYNTAX      OCTET STRING (SIZE(4 | 16))
+
+MplsTunnelStorageType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Same as StorageType from SNMPv2-TC, except with unknown(0)."
+    SYNTAX      INTEGER { unknown(0), other(1), volatile(2), 
+                    nonVolatile(3), permanent(4), readOnly(5) }
+
+MplsTunnelInterfaceIndexOrZero ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "This textual convention is an extension of the
+         IF-MIB::InterfaceIndex convention. The latter defines a greater
+         than zero value used to identify an interface or interface
+         sub-layer in the managed system. This extension permits the
+         additional value of zero. The value zero is object-specific
+         and must therefore be defined as part of the description of
+         any object which uses this syntax. Examples of the usage of
+         zero might include situations where interface was unknown,
+         or when none or all interfaces need to be referenced."
+    SYNTAX      Integer32 (0..2147483647)
+
+MplsGeneralizedLabelType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The label types that are defined for Generalized MPLS."
+    SYNTAX      INTEGER { notValid(0), mplsLabel(1), generalizedLabel(2), 
+                    wavebandLabel(3) }
+
+MplsTunnelPrivateDataSyntax ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION 
+        "Represents private data field."
+    SYNTAX      OCTET STRING (SIZE(0..24))
+
+MplsTunnelTNAAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION 
+        "TNA address of a tunnel."
+    SYNTAX      OCTET STRING (SIZE(0..20))
+
+MplsGeneralizedLabel ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:"
+    STATUS      current
+    DESCRIPTION 
+        "This value represents a generalized MPLS Label.
+         The label contents are specific to the label being
+         represented.
+         
+         Wherever an MplsGeneralizedLabel is copied to or from
+         a signaling protocol message, it is copied byte for
+         byte as is. Therefore, if the octet string is
+         intended to represent multibyte values, it encodes
+         those values in network (big-endian) byte order.
+         This interpretation applies in particular to the
+         non-generalized MPLS labels (32 bits) used in ATM, FR
+         and generic MPLS networks."
+    SYNTAX      OCTET STRING (SIZE(0..255))
+
+MplsTeObjectReservedTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "TC for mplsTeObjectReserved* objects."
+    SYNTAX      Integer32
+
+mplsTeNotifications OBJECT IDENTIFIER
+    ::= { prvtMplsTeMIB 0 }
+
+mplsTeObjects OBJECT IDENTIFIER
+    ::= { prvtMplsTeMIB 1 }
+
+mplsTeObjectReserved1 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 1 }
+
+mplsManTunnelTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsManTunnelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The mplsManTunnelTable allows new MPLS tunnels to be
+         created between an LSR and a remote endpoint, and
+         existing tunnels to be reconfigured or removed.
+         Note that only point-to-point tunnel segments are
+         supported, although multi-point-to-point and point-
+         to-multi-point connections are supported by an LSR
+         acting as a cross-connect. Each MPLS tunnel can
+         thus have one out-segment originating at this LSR
+         and/or one in-segment terminating at this LSR.
+         
+         To configure tunnels where the ingress and egress routers
+         are identified by IPv6 addresses, the following approach is
+         used.
+         
+         - The mplsManTunnelIngressLSRId and mplsManTunnelEgressLSRId
+         fields are set to 32-bit identifiers for the ingress and
+         egress routers.
+         
+         - mplsManTunnelHopTableIndex must be set to a non-zero value.
+         
+         - The first hop in the hop table for the tunnel path must be
+         set to a global scope IPv6 address of the local router.
+         
+         - The last entry in the hop table must be set to a global
+         scope IPv6 address of the egress router."
+    ::= { mplsTeObjects 2 }
+
+mplsManTunnelEntry OBJECT-TYPE
+    SYNTAX      MplsManTunnelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table represents an MPLS tunnel.
+         An entry can be created by a network administrator
+         or by an SNMP agent as instructed by an MPLS
+         signaling protocol. Whenever a new entry is created
+         with mplsManTunnelIsIf set to true(1), then a
+         corresponding entry is created in ifTable as well
+         (see RFC 2233). The ifType of this entry is
+         mplsTunnel(150)."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsManTunnelIndex, 
+                  mplsManTunnelInstance }
+    ::= { mplsManTunnelTable 1 }
+
+MplsManTunnelEntry ::= SEQUENCE {
+    mplsManTunnelIndex                  Integer32,
+    mplsManTunnelInstance               MplsTunnelInstanceIndex,
+    mplsManTunnelRowStatus              RowStatus,
+    mplsManTunnelIngressLSRId           MplsExtendedTunnelIdOctetType,
+    mplsManTunnelEgressLSRId            MplsExtendedTunnelIdOctetType,
+    mplsManTunnelName                   OCTET STRING,
+    mplsManTunnelDescr                  OCTET STRING,
+    mplsManTunnelIfIndex                MplsTunnelInterfaceIndexOrZero,
+    mplsManTunnelSetupPrio              Integer32,
+    mplsManTunnelHoldingPrio            Integer32,
+    mplsManTunnelSessionAttributes      BITS,
+    mplsManTunnelLocalProtectInUse      TruthValue,
+    mplsManTunnelHopTableIndex          MplsPathIndexOrZero,
+    mplsManTunnelPathInUse              MplsPathIndexOrZero,
+    mplsManTunnelIncludeAnyAffinity     MplsTunnelAffinity,
+    mplsManTunnelIncludeAllAffinity     MplsTunnelAffinity,
+    mplsManTunnelExcludeAnyAffinity     MplsTunnelAffinity,
+    mplsManTunnelAdminStatus            INTEGER,
+    mplsManTunnelOperStatus             INTEGER,
+    mplsManTunnelAttributes             BITS,
+    mplsManTunnelPathComp               INTEGER,
+    mplsManTunnelFastRerouteMode        INTEGER,
+    mplsManTunnelBackupSetupPrio        Integer32,
+    mplsManTunnelBackupHoldingPrio      Integer32,
+    mplsManTunnelBackupIncAny           MplsTunnelAffinity,
+    mplsManTunnelBackupIncAll           MplsTunnelAffinity,
+    mplsManTunnelBackupExcAny           MplsTunnelAffinity,
+    mplsManTunnelBackupBandwidth        MplsBitRate,
+    mplsManTunnelBackupMaxHops          Unsigned32,
+    mplsManTunnelMtu                    Integer32,
+    mplsManTunnelRebuildTimer           Unsigned32,
+    mplsManTunnelOperStatusFlags        BITS,
+    mplsManTunnelGuardedDest            IpAddress,
+    mplsManTunnelMBBTimeOut             Integer32,
+    mplsManTunnelOwner                  MplsOwner,
+    mplsManTunnelARHopTableIndex        MplsPathIndexOrZero,
+    mplsManTunnelCHopTableIndex         MplsPathIndexOrZero
+}
+
+mplsManTunnelIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..32638)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies this row."
+    ::= { mplsManTunnelEntry 1 }
+
+mplsManTunnelInstance OBJECT-TYPE
+    SYNTAX      MplsTunnelInstanceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies an instance of a tunnel. It is
+         useful to identify multiple instances of tunnels
+         for the purposes of backup and parallel tunnels."
+    ::= { mplsManTunnelEntry 2 }
+
+mplsManTunnelRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This variable is used to create, modify, and/or
+         delete a row in this table. When a row in this
+         table is in active(1) state, no objects in that row
+         can be modified by the agent except
+         mplsManTunnelAdminStatus, mplsManTunnelRowStatus and
+         mplsManTunnelStorageType."
+    ::= { mplsManTunnelEntry 3 }
+
+mplsManTunnelIngressLSRId OBJECT-TYPE
+    SYNTAX      MplsExtendedTunnelIdOctetType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Identity of the ingress LSR associated with this
+         tunnel instance. When the MPLS signalling protocol
+         is rsvp(2) this value SHOULD be equal to the Tunnel
+         Sender Address in the Sender Template object and MAY
+         be equal to the Extended Tunnel Id field in the
+         SESSION object. When the MPLS signalling protocol is
+         crldp(3) this value SHOULD be equal to the Ingress
+         LSR Router ID field in the LSPID TLV object."
+    REFERENCE   
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         Awduche et al, RFC 3209, December 2001
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+         (Editor), RFC 3212, January 2002"
+    ::= { mplsManTunnelEntry 4 }
+
+mplsManTunnelEgressLSRId OBJECT-TYPE
+    SYNTAX      MplsExtendedTunnelIdOctetType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Identity of the egress LSR associated with this
+         tunnel instance."
+    ::= { mplsManTunnelEntry 5 }
+
+mplsManTunnelName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The canonical name assigned to the tunnel. This name
+         can be used to refer to the tunnel on the LSRs
+         console port. Also see the description of ifName
+         in RFC 2863."
+    REFERENCE   
+        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+         and F. Kastenholtz, June 2000"
+    ::= { mplsManTunnelEntry 6 }
+
+mplsManTunnelDescr OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A textual string containing information about the
+         tunnel. If there is no description this object
+         contains a zero length string. This object may
+         not be signaled by MPLS signaling protocols,
+         consequentally the value of this object at transit
+         and egress LSRs MAY be automatically generated or
+         absent."
+    ::= { mplsManTunnelEntry 7 }
+
+mplsManTunnelIfIndex OBJECT-TYPE
+    SYNTAX      MplsTunnelInterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "If mplsManTunnelIsIf is set to true, then this value
+         contains the LSR-assigned ifIndex which corresponds
+         to an entry in the interfaces table. Otherwise
+         this variable should contain the value of zero
+         indicating that a valid ifIndex was not assigned to
+         this tunnel interface."
+    REFERENCE   
+        "RFC 2863 - The Interfaces Group MIB, McCloghrie, K.,
+         and F. Kastenholtz, June 2000"
+    ::= { mplsManTunnelEntry 8 }
+
+mplsManTunnelSetupPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the setup priority of this tunnel."
+    REFERENCE   
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         Awduche et al, RFC 3209, December 2001
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+         (Editor), RFC 3212, January 2002"
+    ::= { mplsManTunnelEntry 9 }
+
+mplsManTunnelHoldingPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the holding priority for this tunnel."
+    REFERENCE   
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         Awduche et al, RFC 3209, December 2001
+         
+         2. Constraint-Based LSP Setup using LDP, Jamoussi
+         (Editor), RFC 3212, January 2002"
+    ::= { mplsManTunnelEntry 10 }
+
+mplsManTunnelSessionAttributes OBJECT-TYPE
+    SYNTAX      BITS { fastReroute(0), mergingPermitted(1), 
+                    isPersistent(2), isPinned(3), recordRoute(4), 
+                    reserved5(5), bandwidthProtect(6), nodeProtect(7) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This bitmask indicates optional session values for
+         this tunnel. The following describes these bit
+         fields:
+         
+         fastReroute This flag indicates that any tunnel
+         hop may choose to reroute this tunnel without
+         tearing it down. This flag permits transit routers
+         to use a local repair mechanism which may result in
+         violation of the explicit routing of this tunnel.
+         When a fault is detected on an adjacent downstream
+         link or node, a transit router can reroute traffic
+         for fast service restoration.
+         
+         mergingPermitted This flag permits transit routers
+         to merge this session with other RSVP sessions for
+         the purpose of reducing resource overhead on
+         downstream transit routers, thereby providing
+         better network scalability.
+         
+         isPersistent Indicates whether this tunnel should
+         be restored automatically after a failure occurs.
+         
+         isPinned This flag indicates whether the loose-
+         routed hops of this tunnel are to be pinned.
+         
+         recordRoute This flag indicates if the
+         signaling protocol should remember the tunnel path
+         after it has been signaled.
+         
+         -- recordLabels This flag indicates if the
+         -- signaling protocol should record labels as well as
+         -- the tunnel path.
+         
+         bandwidthProtect This flag indicates whether fast reroute
+         bandwidth protection is desired.
+         
+         nodeProtect This flag indicates whether fast reroute
+         node protection is desired."
+    REFERENCE   
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         Awduche et al, RFC 3209, December 2001."
+    ::= { mplsManTunnelEntry 11 }
+
+mplsManTunnelLocalProtectInUse OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates that the local repair mechanism is in use
+         to maintain this tunnel (usually in the face of an
+         outage of the link it was previously routed over)."
+    ::= { mplsManTunnelEntry 12 }
+
+mplsManTunnelHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Index into the mplsTunnelManHopTable entry that
+         specifies the explicit route hops for this tunnel.
+         This object is meaningful only at the head-end of
+         the tunnel.
+         
+         For UNI tunnels, this field should be set to 0.
+         
+         For tunnels with no configured explicit route hops, this
+         field should be set to 0. In this case, the tunnel is
+         routed using mplsTunnelEgressLSRId."
+    ::= { mplsManTunnelEntry 13 }
+
+mplsManTunnelPathInUse OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This value denotes the configured path that was
+         chosen for this tunnel. This value reflects the
+         secondary index into mplsTunnelManHopTable. This path
+         may not exactly match the one in
+         mplsTunnelARHopTable due to the fact that some CSPF
+         modification may have taken place. See
+         mplsTunnelARHopTable for the actual path being
+         taken by the tunnel. A value of zero denotes that
+         no path is currently in use or available.
+         
+         For UNI tunnels, this field should be set to 0.
+         
+         For tunnels with no configued explicit route hops,
+         this field should be set to 0."
+    ::= { mplsManTunnelEntry 14 }
+
+mplsManTunnelIncludeAnyAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A link satisfies the include-any constraint if and
+         only if the constraint is zero, or the link and the
+         constraint have a resource class in common.
+         
+         The field is a bitmask. Every request does not overwrite
+         the previous one. 0 value resets the field."
+    REFERENCE   
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         Awduche et al, RFC 3209, December 2001."
+    ::= { mplsManTunnelEntry 15 }
+
+mplsManTunnelIncludeAllAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A link satisfies the include-all constraint if and
+         only if the link contains all of the administrative
+         groups specified in the constraint.
+         
+         The field is a bitmask. Every request does not overwrite
+         the previous one. 0 value resets the field."
+    REFERENCE   
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         Awduche et al, RFC 3209, December 2001."
+    ::= { mplsManTunnelEntry 16 }
+
+mplsManTunnelExcludeAnyAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "A link satisfies the exclude-any constraint if and
+         only if the link contains none of the
+         administrative groups specified in the constraint.
+         
+         The field is a bitmask. Every request does not overwrite
+         the previous one. 0 value resets the field."
+    REFERENCE   
+        "1. RSVP-TE: Extensions to RSVP for LSP Tunnels,
+         Awduche et al, RFC 3209, December 2001."
+    ::= { mplsManTunnelEntry 17 }
+
+mplsManTunnelAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2), testing(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the desired operational status of this
+         tunnel."
+    ::= { mplsManTunnelEntry 18 }
+
+mplsManTunnelOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2), testing(3), unknown(4), 
+                    dormant(5), notPresent(6), lowerLayerDown(7), 
+                    resignaling(8), suppressed(9), preempted(10) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the actual operational status of this
+         tunnel, which is typically but not limited to, a
+         function of the state of individual segments of
+         this tunnel."
+    ::= { mplsManTunnelEntry 19 }
+
+mplsManTunnelAttributes OBJECT-TYPE
+    SYNTAX      BITS { reserved0(0), reserved1(1), reserved2(2), 
+                    reserved3(3), reserved4(4), labelRecordingDesired(5) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This bitmask indicates optional parameters for this tunnel.
+         These bits should be taken in addition to those defined in
+         mplsManTunnelSessionAttributes in order to determine the full set
+         of options to be signaled (for example SESSION_ATTRIBUTES flags
+         in RSVP-TE). The following describes these bitfields:
+         
+         labelRecordingDesired
+         This flag indicates that label information should be included
+         when doing a route record. This bit is not valid unless the
+         recordRoute bit is set in the mplsManTunnelSessionAttributes object."
+    REFERENCE   
+        "RSVP-TE: Extensions to RSVP for LSP Tunnels, Awduche et al.,
+         RFC 3209, December 2001."
+    ::= { mplsManTunnelEntry 20 }
+
+mplsManTunnelPathComp OBJECT-TYPE
+    SYNTAX      INTEGER { dynamicFull(1), explicit(2), dynamicPartial(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This value instructs the source node on how to perform path
+         computation on the explicit route specified by the associated
+         entries in the mplsTunnelManHopTable.
+         
+         dynamicFull
+         The user specifies at least the source and
+         destination of the path and expects that the CSPF
+         will calculate the remainder of the path.
+         
+         explicit
+         The user specifies the entire path for the tunnel to
+         take. This path may contain strict or loose hops.
+         Evaluation of the explicit route will be performed
+         hop by hop through the network.
+         
+         dynamicPartial
+         The user specifies at least the source and
+         destination of the path and expects that the CSPF
+         will calculate the remainder of the path. The path
+         computed by CSPF is allowed to be only partially
+         computed allowing the remainder of the path to be
+         filled in across the network.
+         
+         This object deprecates mplsTunnelManHopEntryPathComp."
+    ::= { mplsManTunnelEntry 21 }
+
+mplsManTunnelFastRerouteMode OBJECT-TYPE
+    SYNTAX      INTEGER { noFastReroute(0), detourFastReroute(1), 
+                    facilityFastReroute(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates whether or not this tunnel should be protected
+         by a fast reroute mechanism, and if so which method should
+         be used.
+         noFastReroute - no fast reroute protection.
+         detourFastReroute - fast reroute protection using the
+         one-to-one detour backup method.
+         facilityFastReroute - fast reroute protection using the
+         facility backup method.
+         Fast reroute is only available for uni-directional LSPs."
+    ::= { mplsManTunnelEntry 22 }
+
+mplsManTunnelBackupSetupPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Setup priority for backup tunnels set up to protect this
+         tunnel. This field is only valid if the mplsManTunnelFastRerouteMode
+         above is not noFastReroute."
+    ::= { mplsManTunnelEntry 23 }
+
+mplsManTunnelBackupHoldingPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Holding priority for backup tunnels set up to protect this
+         tunnel. This field is only valid if the mplsManTunnelFastRerouteMode
+         above is not noFastReroute."
+    ::= { mplsManTunnelEntry 24 }
+
+mplsManTunnelBackupIncAny OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Include-any resource affinity for backup tunnels set up to
+         protect this tunnel.
+         A link satisfies the include-any constraint if and only if
+         the constraint is zero, or the link and the constraint
+         have a resource class in common.
+         This field is only valid if the mplsManTunnelFastRerouteMode
+         above is not noFastReroute."
+    ::= { mplsManTunnelEntry 25 }
+
+mplsManTunnelBackupIncAll OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Include-all resource affinity for backup tunnels set up to
+         protect this tunnel.
+         A link satisfies the include-all constraint if and only if
+         the link contains all of the adminstrative groups
+         specified in the constraint.
+         This field is only valid if the mplsManTunnelFastRerouteMode
+         above is not noFastReroute."
+    ::= { mplsManTunnelEntry 26 }
+
+mplsManTunnelBackupExcAny OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Exclude-any resource affinity for backup tunnels set up to
+         protect this tunnel.
+         A link satisfies the exclude-any constraint if and only if
+         the constraint is zero, or the link and the constraint
+         have a resource class in common.
+         This field is only valid if the mplsManTunnelFastRerouteMode
+         above is not noFastReroute."
+    ::= { mplsManTunnelEntry 27 }
+
+mplsManTunnelBackupBandwidth OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The estimated bandwidth required for backup tunnels, in
+         units of 1000 bits/second. A value of zero indicates
+         best-effort.
+         This field is only valid if the mplsManTunnelFastRerouteMode
+         above is not noFastReroute."
+    ::= { mplsManTunnelEntry 28 }
+
+mplsManTunnelBackupMaxHops OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum number of extra hops the backup path is
+         allowed to take, from a Point of Local Repair (PLR) to a
+         Merge Point (MP), with PLR and MP excluded in counting.
+         A hop-limit of 0 means only direct links between PLR and MP
+         can be used.
+         This field is only valid if the mplsManTunnelFastRerouteMode
+         above is not noFastReroute."
+    ::= { mplsManTunnelEntry 29 }
+
+mplsManTunnelMtu OBJECT-TYPE
+    SYNTAX      Integer32 (64..12288)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Maximal transfer unit of the tunnel"
+    ::= { mplsManTunnelEntry 30 }
+
+mplsManTunnelRebuildTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Defines a period in minutes (0..1440), after which the tunnel will be unconditionally
+         rebuild. The maximal valid value is 1440 minutes (24 hours)"
+    ::= { mplsManTunnelEntry 31 }
+
+mplsManTunnelOperStatusFlags OBJECT-TYPE
+    SYNTAX      BITS { empty(0), tunnelResignalling(1), 
+                    tunnelSuppressed(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Flags to extend the information of the tunnel state
+         For the behaviour - bits meaning:
+         tunnelResignalling (1) - This status shows that currently the tunnel
+         has been resignalled. The resignalling state of a tunnel
+         should be considered together with the mplsManTunnelOperStatus
+         attribute value of the same tunnel.
+         tunnelSuppressed (2) - This status shows that the tunnel has
+         been established, but a higher priority tunnel is active
+         and in use. This tunnel can be activated, once the higher
+         protocol tunnel fails by any reason, and in this case
+         the tunnelSuppressed status will be cleared."
+    ::= { mplsManTunnelEntry 32 }
+
+mplsManTunnelGuardedDest OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The guarded destination object specifies which IP destination address the current
+         tunnel protects used with the fast reroute feature.
+         The tunnel must not be fast reroute enabled."
+    ::= { mplsManTunnelEntry 33 }
+
+mplsManTunnelMBBTimeOut OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the timer configuration (in minutes) for Make-before-break (MBB).
+         The default value of this object is 10 minutes."
+    ::= { mplsManTunnelEntry 34 }
+
+mplsManTunnelOwner OBJECT-TYPE
+    SYNTAX      MplsOwner
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Denotes the entity that created and is responsible
+         for managing this tunnel. This column is
+         automatically filled by the agent on creation of a
+         row."
+    ::= { mplsManTunnelEntry 35 }
+
+mplsManTunnelARHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Index into the mplsTunnelARHopTable entry that
+         specifies the actual hops traversed by the tunnel.
+         This is automatically updated by the agent when the
+         actual hops becomes available."
+    ::= { mplsManTunnelEntry 36 }
+
+mplsManTunnelCHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Index into the mplsTunnelCHopTable entry that
+         specifies the computed hops traversed by the
+         tunnel. This is automatically updated by the agent
+         when computed hops become available or when
+         computed hops get modified."
+    ::= { mplsManTunnelEntry 37 }
+
+mplsTeObjectReserved3 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 3 }
+
+mplsAutoTunnelTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsAutoTunnelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Similar to mplsManTunnelTable but for automatic tunnels."
+    ::= { mplsTeObjects 4 }
+
+mplsAutoTunnelEntry OBJECT-TYPE
+    SYNTAX      MplsAutoTunnelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsAutoTunnelIndex, 
+                  mplsAutoTunnelInstance }
+    ::= { mplsAutoTunnelTable 1 }
+
+MplsAutoTunnelEntry ::= SEQUENCE {
+    mplsAutoTunnelIndex                 Integer32,
+    mplsAutoTunnelInstance              MplsTunnelInstanceIndex,
+    mplsAutoTunnelRowStatus             RowStatus,
+    mplsAutoTunnelIngressLSRId          MplsExtendedTunnelIdOctetType,
+    mplsAutoTunnelEgressLSRId           MplsExtendedTunnelIdOctetType,
+    mplsAutoTunnelName                  OCTET STRING,
+    mplsAutoTunnelDescr                 OCTET STRING,
+    mplsAutoTunnelIfIndex               MplsTunnelInterfaceIndexOrZero,
+    mplsAutoTunnelSetupPrio             Integer32,
+    mplsAutoTunnelHoldingPrio           Integer32,
+    mplsAutoTunnelSessionAttributes     BITS,
+    mplsAutoTunnelLocalProtectInUse     TruthValue,
+    mplsAutoTunnelHopTableIndex         MplsPathIndexOrZero,
+    mplsAutoTunnelPathInUse             MplsPathIndexOrZero,
+    mplsAutoTunnelIncludeAnyAffinity    MplsTunnelAffinity,
+    mplsAutoTunnelIncludeAllAffinity    MplsTunnelAffinity,
+    mplsAutoTunnelExcludeAnyAffinity    MplsTunnelAffinity,
+    mplsAutoTunnelOperStatus            INTEGER,
+    mplsAutoTunnelAttributes            BITS,
+    mplsAutoTunnelPathComp              INTEGER,
+    mplsAutoTunnelFastRerouteMode       INTEGER,
+    mplsAutoTunnelBackupSetupPrio       Integer32,
+    mplsAutoTunnelBackupHoldingPrio     Integer32,
+    mplsAutoTunnelBackupIncAny          MplsTunnelAffinity,
+    mplsAutoTunnelBackupIncAll          MplsTunnelAffinity,
+    mplsAutoTunnelBackupExcAny          MplsTunnelAffinity,
+    mplsAutoTunnelBackupBandwidth       MplsBitRate,
+    mplsAutoTunnelBackupMaxHops         Unsigned32,
+    mplsAutoTunnelMtu                   Integer32,
+    mplsAutoTunnelRebuildTimer          Unsigned32,
+    mplsAutoTunnelOperStatusFlags       BITS,
+    mplsAutoTunnelGuardedDest           IpAddress,
+    mplsAutoTunnelMBBTimeOut            Integer32,
+    mplsAutoTunnelOwner                 MplsOwner,
+    mplsAutoTunnelARHopTableIndex       MplsPathIndexOrZero,
+    mplsAutoTunnelCHopTableIndex        MplsPathIndexOrZero
+}
+
+mplsAutoTunnelIndex OBJECT-TYPE
+    SYNTAX      Integer32 (32639..32767)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 1 }
+
+mplsAutoTunnelInstance OBJECT-TYPE
+    SYNTAX      MplsTunnelInstanceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 2 }
+
+mplsAutoTunnelRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 3 }
+
+mplsAutoTunnelIngressLSRId OBJECT-TYPE
+    SYNTAX      MplsExtendedTunnelIdOctetType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 4 }
+
+mplsAutoTunnelEgressLSRId OBJECT-TYPE
+    SYNTAX      MplsExtendedTunnelIdOctetType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 5 }
+
+mplsAutoTunnelName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 6 }
+
+mplsAutoTunnelDescr OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 7 }
+
+mplsAutoTunnelIfIndex OBJECT-TYPE
+    SYNTAX      MplsTunnelInterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 8 }
+
+mplsAutoTunnelSetupPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 9 }
+
+mplsAutoTunnelHoldingPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 10 }
+
+mplsAutoTunnelSessionAttributes OBJECT-TYPE
+    SYNTAX      BITS { fastReroute(0), mergingPermitted(1), 
+                    isPersistent(2), isPinned(3), recordRoute(4), 
+                    reserved5(5), bandwidthProtect(6), nodeProtect(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 11 }
+
+mplsAutoTunnelLocalProtectInUse OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 12 }
+
+mplsAutoTunnelHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 14 }
+
+mplsAutoTunnelPathInUse OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 15 }
+
+mplsAutoTunnelIncludeAnyAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 16 }
+
+mplsAutoTunnelIncludeAllAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 17 }
+
+mplsAutoTunnelExcludeAnyAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 18 }
+
+mplsAutoTunnelOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2), testing(3), unknown(4), 
+                    dormant(5), notPresent(6), lowerLayerDown(7), 
+                    resignaling(8), suppressed(9), preempted(10) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 19 }
+
+mplsAutoTunnelAttributes OBJECT-TYPE
+    SYNTAX      BITS { reserved0(0), reserved1(1), reserved2(2), 
+                    reserved3(3), reserved4(4), labelRecordingDesired(5) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 20 }
+
+mplsAutoTunnelPathComp OBJECT-TYPE
+    SYNTAX      INTEGER { dynamicFull(1), explicit(2), dynamicPartial(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 21 }
+
+mplsAutoTunnelFastRerouteMode OBJECT-TYPE
+    SYNTAX      INTEGER { noFastReroute(0), detourFastReroute(1), 
+                    facilityFastReroute(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 22 }
+
+mplsAutoTunnelBackupSetupPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 23 }
+
+mplsAutoTunnelBackupHoldingPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 24 }
+
+mplsAutoTunnelBackupIncAny OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 25 }
+
+mplsAutoTunnelBackupIncAll OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 26 }
+
+mplsAutoTunnelBackupExcAny OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 27 }
+
+mplsAutoTunnelBackupBandwidth OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 28 }
+
+mplsAutoTunnelBackupMaxHops OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 29 }
+
+mplsAutoTunnelMtu OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 30 }
+
+mplsAutoTunnelRebuildTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The period, in seconds, after which the tunnel will be rebuilt."
+    ::= { mplsAutoTunnelEntry 31 }
+
+mplsAutoTunnelOperStatusFlags OBJECT-TYPE
+    SYNTAX      BITS { empty(0), tunnelResignalling(1), 
+                    tunnelSuppressed(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 32 }
+
+mplsAutoTunnelGuardedDest OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 33 }
+
+mplsAutoTunnelMBBTimeOut OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 34 }
+
+mplsAutoTunnelOwner OBJECT-TYPE
+    SYNTAX      MplsOwner
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 35 }
+
+mplsAutoTunnelARHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 36 }
+
+mplsAutoTunnelCHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsAutoTunnelEntry 37 }
+
+mplsTeObjectReserved5 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 5 }
+
+mplsDynTunnelTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsDynTunnelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Similar to mplsManTunnelTable but for dynamic tunnels."
+    ::= { mplsTeObjects 6 }
+
+mplsDynTunnelEntry OBJECT-TYPE
+    SYNTAX      MplsDynTunnelEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsDynTunnelIndex, 
+                  mplsDynTunnelInstance }
+    ::= { mplsDynTunnelTable 1 }
+
+MplsDynTunnelEntry ::= SEQUENCE {
+    mplsDynTunnelIndex                  Integer32,
+    mplsDynTunnelInstance               MplsTunnelInstanceIndex,
+    mplsDynTunnelIngressLSRId           MplsExtendedTunnelIdOctetType,
+    mplsDynTunnelEgressLSRId            MplsExtendedTunnelIdOctetType,
+    mplsDynTunnelName                   OCTET STRING,
+    mplsDynTunnelDescr                  OCTET STRING,
+    mplsDynTunnelIfIndex                MplsTunnelInterfaceIndexOrZero,
+    mplsDynTunnelSetupPrio              Integer32,
+    mplsDynTunnelHoldingPrio            Integer32,
+    mplsDynTunnelSessionAttributes      BITS,
+    mplsDynTunnelLocalProtectInUse      TruthValue,
+    mplsDynTunnelHopTableIndex          MplsPathIndexOrZero,
+    mplsDynTunnelPathInUse              MplsPathIndexOrZero,
+    mplsDynTunnelIncludeAnyAffinity     MplsTunnelAffinity,
+    mplsDynTunnelIncludeAllAffinity     MplsTunnelAffinity,
+    mplsDynTunnelExcludeAnyAffinity     MplsTunnelAffinity,
+    mplsDynTunnelAdminStatus            INTEGER,
+    mplsDynTunnelOperStatus             INTEGER,
+    mplsDynTunnelAttributes             BITS,
+    mplsDynTunnelPathComp               INTEGER,
+    mplsDynTunnelFastRerouteMode        INTEGER,
+    mplsDynTunnelBackupSetupPrio        Integer32,
+    mplsDynTunnelBackupHoldingPrio      Integer32,
+    mplsDynTunnelBackupIncAny           MplsTunnelAffinity,
+    mplsDynTunnelBackupIncAll           MplsTunnelAffinity,
+    mplsDynTunnelBackupExcAny           MplsTunnelAffinity,
+    mplsDynTunnelBackupBandwidth        MplsBitRate,
+    mplsDynTunnelBackupMaxHops          Unsigned32,
+    mplsDynTunnelMtu                    Integer32,
+    mplsDynTunnelRebuildTimer           Unsigned32,
+    mplsDynTunnelOperStatusFlags        BITS,
+    mplsDynTunnelGuardedDest            IpAddress,
+    mplsDynTunnelMBBTimeOut             Integer32,
+    mplsDynTunnelOwner                  MplsOwner,
+    mplsDynTunnelARHopTableIndex        MplsPathIndexOrZero,
+    mplsDynTunnelCHopTableIndex         MplsPathIndexOrZero
+}
+
+mplsDynTunnelIndex OBJECT-TYPE
+    SYNTAX      Integer32 (32768..65535)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 1 }
+
+mplsDynTunnelInstance OBJECT-TYPE
+    SYNTAX      MplsTunnelInstanceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 2 }
+
+mplsDynTunnelIngressLSRId OBJECT-TYPE
+    SYNTAX      MplsExtendedTunnelIdOctetType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 3 }
+
+mplsDynTunnelEgressLSRId OBJECT-TYPE
+    SYNTAX      MplsExtendedTunnelIdOctetType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 4 }
+
+mplsDynTunnelName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 5 }
+
+mplsDynTunnelDescr OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 6 }
+
+mplsDynTunnelIfIndex OBJECT-TYPE
+    SYNTAX      MplsTunnelInterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 7 }
+
+mplsDynTunnelSetupPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 8 }
+
+mplsDynTunnelHoldingPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 9 }
+
+mplsDynTunnelSessionAttributes OBJECT-TYPE
+    SYNTAX      BITS { fastReroute(0), mergingPermitted(1), 
+                    isPersistent(2), isPinned(3), recordRoute(4), 
+                    reserved5(5), bandwidthProtect(6), nodeProtect(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 10 }
+
+mplsDynTunnelLocalProtectInUse OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 11 }
+
+mplsDynTunnelHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 12 }
+
+mplsDynTunnelPathInUse OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 13 }
+
+mplsDynTunnelIncludeAnyAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 14 }
+
+mplsDynTunnelIncludeAllAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 15 }
+
+mplsDynTunnelExcludeAnyAffinity OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 16 }
+
+mplsDynTunnelAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2), testing(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 17 }
+
+mplsDynTunnelOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2), testing(3), unknown(4), 
+                    dormant(5), notPresent(6), lowerLayerDown(7), 
+                    resignaling(8), suppressed(9), preempted(10) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 18 }
+
+mplsDynTunnelAttributes OBJECT-TYPE
+    SYNTAX      BITS { reserved0(0), reserved1(1), reserved2(2), 
+                    reserved3(3), reserved4(4), labelRecordingDesired(5) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 19 }
+
+mplsDynTunnelPathComp OBJECT-TYPE
+    SYNTAX      INTEGER { dynamicFull(1), explicit(2), dynamicPartial(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 20 }
+
+mplsDynTunnelFastRerouteMode OBJECT-TYPE
+    SYNTAX      INTEGER { noFastReroute(0), detourFastReroute(1), 
+                    facilityFastReroute(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 21 }
+
+mplsDynTunnelBackupSetupPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 22 }
+
+mplsDynTunnelBackupHoldingPrio OBJECT-TYPE
+    SYNTAX      Integer32 (0..7)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 23 }
+
+mplsDynTunnelBackupIncAny OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 24 }
+
+mplsDynTunnelBackupIncAll OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 25 }
+
+mplsDynTunnelBackupExcAny OBJECT-TYPE
+    SYNTAX      MplsTunnelAffinity
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 26 }
+
+mplsDynTunnelBackupBandwidth OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 27 }
+
+mplsDynTunnelBackupMaxHops OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 28 }
+
+mplsDynTunnelMtu OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 29 }
+
+mplsDynTunnelRebuildTimer OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 30 }
+
+mplsDynTunnelOperStatusFlags OBJECT-TYPE
+    SYNTAX      BITS { empty(0), tunnelResignalling(1), 
+                    tunnelSuppressed(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 31 }
+
+mplsDynTunnelGuardedDest OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 32 }
+
+mplsDynTunnelMBBTimeOut OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 33 }
+
+mplsDynTunnelOwner OBJECT-TYPE
+    SYNTAX      MplsOwner
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 34 }
+
+mplsDynTunnelARHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 35 }
+
+mplsDynTunnelCHopTableIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsManTunnelTable."
+    ::= { mplsDynTunnelEntry 36 }
+
+mplsTeObjectReserved7 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 7 }
+
+mplsTunnelManHopTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsTunnelManHopEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The mplsTunnelManHopTable is used to indicate the
+         hops, strict or loose, for an MPLS tunnel defined
+         in mplsManTunnelTable, when it is established via
+         signaling, for the outgoing direction of the
+         tunnel. Each row in this table is indexed by
+         mplsTunnelManHopListIndex. Each row also has a
+         secondary index mplsTunnelManHopIndex corresponding
+         to the next hop that this row corresponds to. The
+         first row in the table is the first hop after the
+         origination point of the tunnel. In case we want
+         to specify a particular interface on the
+         originating LSR of an outgoing tunnel by which we
+         want packets to exit the LSR, we specify this as
+         the first hop for this tunnel in
+         mplsTunnelManHopTable."
+    ::= { mplsTeObjects 8 }
+
+mplsTunnelManHopEntry OBJECT-TYPE
+    SYNTAX      MplsTunnelManHopEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table represents a tunnel hop. An
+         entry is created by a network administrator for
+         signaled ERLSP set up by an MPLS signaling
+         protocol."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsTunnelManHopListIndex, 
+                  mplsTunnelManHopPathOptionIndex, mplsTunnelManHopIndex }
+    ::= { mplsTunnelManHopTable 1 }
+
+MplsTunnelManHopEntry ::= SEQUENCE {
+    mplsTunnelManHopListIndex           MplsPathIndex,
+    mplsTunnelManHopPathOptionIndex     MplsPathIndex,
+    mplsTunnelManHopIndex               MplsPathIndex,
+    mplsTunnelManHopRowStatus           RowStatus,
+    mplsTunnelManHopEnable              TruthValue,
+    mplsTunnelManHopAddrType            TeHopAddressType,
+    mplsTunnelManHopIpAddr              TeHopAddress,
+    mplsTunnelManHopIpPrefixLen         Unsigned32,
+    mplsTunnelManHopType                INTEGER,
+    mplsTunnelManHopInclude             TruthValue
+}
+
+mplsTunnelManHopListIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Primary index into this table identifying a
+         particular explicit route object."
+    ::= { mplsTunnelManHopEntry 1 }
+
+mplsTunnelManHopPathOptionIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Secondary index into this table identifying a
+         particular group of hops representing a particular
+         configured path. This is otherwise known as a path
+         option."
+    ::= { mplsTunnelManHopEntry 2 }
+
+mplsTunnelManHopIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Secondary index into this table identifying a
+         particular hop."
+    ::= { mplsTunnelManHopEntry 3 }
+
+mplsTunnelManHopRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This variable is used to create, modify, and/or
+         delete a row in this table. When a row in this
+         table is in active(1) state, no objects in that row
+         can be modified by the agent except
+         mplsTunnelManHopRowStatus and
+         mplsTunnelManHopStorageType."
+    ::= { mplsTunnelManHopEntry 4 }
+
+mplsTunnelManHopEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administratively enable or disable the hop."
+    ::= { mplsTunnelManHopEntry 5 }
+
+mplsTunnelManHopAddrType OBJECT-TYPE
+    SYNTAX      TeHopAddressType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Hop Address Type of this tunnel hop.
+         
+         The value of this object cannot be changed
+         if the value of the corresponding
+         mplsTunnelManHopRowStatus object is 'active'.
+         
+         Note that lspid(5) is a valid option only
+         for tunnels signaled via CRLDP."
+    ::= { mplsTunnelManHopEntry 6 }
+
+mplsTunnelManHopIpAddr OBJECT-TYPE
+    SYNTAX      TeHopAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Tunnel Hop Address for this tunnel hop.
+         
+         The type of this address is determined by the
+         value of the corresponding mplsTunnelManHopAddrType.
+         
+         The value of this object cannot be changed
+         if the value of the corresponding
+         mplsTunnelManHopRowStatus object is 'active'."
+    ::= { mplsTunnelManHopEntry 7 }
+
+mplsTunnelManHopIpPrefixLen OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If mplsTunnelManHopAddrType is set to ipv4(1) or
+         ipv6(2), then this value will contain an
+         appropriate prefix length for the IP address in
+         object mplsTunnelManHopIpAddr. Otherwise this value
+         is irrelevant and should be ignored."
+    ::= { mplsTunnelManHopEntry 8 }
+
+mplsTunnelManHopType OBJECT-TYPE
+    SYNTAX      INTEGER { strict(1), loose(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Denotes whether this tunnel hop is routed in a
+         strict or loose fashion. The value of this object
+         has no meaning if the mplsTunnelManHopInclude object
+         is set to 'false'."
+    ::= { mplsTunnelManHopEntry 9 }
+
+mplsTunnelManHopInclude OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If this value is set to true, then this indicates
+         that this hop must be included in the tunnel's
+         path. If this value is set to 'false', then this hop
+         must be avoided when calculating the path for this
+         tunnel. The default value of this object is 'true',
+         so that by default all indicated hops are included
+         in the CSPF path computation. If this object is set
+         to 'false' the value of mplsTunnelManHopType should be
+         ignored."
+    ::= { mplsTunnelManHopEntry 10 }
+
+mplsTeObjectReserved9 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 9 }
+
+mplsTunnelAutoHopTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsTunnelAutoHopEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Similar to mplsTunnelManHopTable but for automatic tunnels."
+    ::= { mplsTeObjects 10 }
+
+mplsTunnelAutoHopEntry OBJECT-TYPE
+    SYNTAX      MplsTunnelAutoHopEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsTunnelAutoHopListIndex, 
+                  mplsTunnelAutoHopPathOptionIndex, 
+                  mplsTunnelAutoHopIndex }
+    ::= { mplsTunnelAutoHopTable 1 }
+
+MplsTunnelAutoHopEntry ::= SEQUENCE {
+    mplsTunnelAutoHopListIndex          MplsPathIndex,
+    mplsTunnelAutoHopPathOptionIndex    MplsPathIndex,
+    mplsTunnelAutoHopIndex              MplsPathIndex,
+    mplsTunnelAutoHopAddrType           TeHopAddressType,
+    mplsTunnelAutoHopIpAddr             TeHopAddress,
+    mplsTunnelAutoHopIpPrefixLen        Unsigned32,
+    mplsTunnelAutoHopType               INTEGER,
+    mplsTunnelAutoHopInclude            TruthValue
+}
+
+mplsTunnelAutoHopListIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    ::= { mplsTunnelAutoHopEntry 1 }
+
+mplsTunnelAutoHopPathOptionIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    ::= { mplsTunnelAutoHopEntry 2 }
+
+mplsTunnelAutoHopIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    ::= { mplsTunnelAutoHopEntry 3 }
+
+mplsTunnelAutoHopAddrType OBJECT-TYPE
+    SYNTAX      TeHopAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    ::= { mplsTunnelAutoHopEntry 4 }
+
+mplsTunnelAutoHopIpAddr OBJECT-TYPE
+    SYNTAX      TeHopAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    ::= { mplsTunnelAutoHopEntry 5 }
+
+mplsTunnelAutoHopIpPrefixLen OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    ::= { mplsTunnelAutoHopEntry 6 }
+
+mplsTunnelAutoHopType OBJECT-TYPE
+    SYNTAX      INTEGER { strict(1), loose(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    ::= { mplsTunnelAutoHopEntry 7 }
+
+mplsTunnelAutoHopInclude OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManHopTable."
+    ::= { mplsTunnelAutoHopEntry 8 }
+
+mplsTeObjectReserved11 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 11 }
+
+mplsTunnelManResTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsTunnelManResEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The mplsTunnelManResTable allows a manager to
+         specify which resources are desired for an MPLS
+         tunnel within the mplsManTunnelTable. This table
+         also allows several tunnels to
+         point to a single entry in this table, implying
+         that these tunnels should share resources."
+    ::= { mplsTeObjects 12 }
+
+mplsTunnelManResEntry OBJECT-TYPE
+    SYNTAX      MplsTunnelManResEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table represents a set of resources
+         for an MPLS tunnel. An entry can be created by a
+         network administrator or by an SNMP agent as
+         instructed by any MPLS signaling protocol."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsTunnelManResIndex }
+    ::= { mplsTunnelManResTable 1 }
+
+MplsTunnelManResEntry ::= SEQUENCE {
+    mplsTunnelManResIndex           Unsigned32,
+    mplsTunnelManResRowStatus       RowStatus,
+    mplsTunnelManResMaxRate         MplsBitRate,
+    mplsTunnelManResMeanRate        MplsBitRate,
+    mplsTunnelManResMaxBurstSize    MplsBurstSize,
+    mplsTunnelManResMeanBurstSize   MplsBurstSize,
+    mplsTunnelManResExBurstSize     MplsBurstSize
+}
+
+mplsTunnelManResIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..1073610751)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies this row."
+    ::= { mplsTunnelManResEntry 1 }
+
+mplsTunnelManResRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This variable is used to create, modify, and/or
+         delete a row in this table."
+    ::= { mplsTunnelManResEntry 2 }
+
+mplsTunnelManResMaxRate OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum rate in units of 1000 bits/second.
+         
+         Note that setting mplsTunnelManResMaxRate,
+         mplsTunnelManResMeanRate, and
+         mplsTunnelManResMaxBurstSize to 0 indicates best-effort
+         treatment. This object is copied to an instance of
+         mplsTrafficParamMaxRate in mplsTrafficParamTable the OID
+         of which is copied into the corresponding
+         mplsInSegmentTrafficParamPtr.
+         
+         If the ingress node sets a maximum rate of positive
+         infinity, the egress node will return a value of
+         positive infinity on the MIB GET response. This
+         special value may not be used when setting the maximum
+         rate with this MIB."
+    ::= { mplsTunnelManResEntry 3 }
+
+mplsTunnelManResMeanRate OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mean rate in units of 1000 bits/second.
+         
+         This object is copied into an instance of
+         mplsTrafficParamMeanRate in the
+         mplsTrafficParamTable. The OID of this table entry
+         is then copied into the corresponding
+         mplsInSegmentTrafficParamPtr.
+         
+         When resource allocation is performed as requested
+         by this TSpec object, it is copied into an entry in
+         mplsTrafficParamTable [LSRMIB]:
+         mplsTunnelInMeanRate to mplsTrafficParamMeanRate.
+         The OID of this entry is copied to
+         mplsInSegmentTrafficParamPtr of the corresponding
+         in-segment entry."
+    ::= { mplsTunnelManResEntry 4 }
+
+mplsTunnelManResMaxBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The maximum burst size in bytes. This object is
+         copied to mplsInSegmentMaxBurstSize of the
+         corresponding in-segment.
+         
+         When resource allocation is performed as requested
+         by this TSpec object, it is copied into an entry in
+         mplsTrafficParamTable [LSRMIB]:
+         mplsTunnelInMaxBurstSize to
+         mplsTrafficParamMaxBurstSize. The OID of this entry
+         is copied to mplsInSegmentTrafficParamPtr of the
+         corresponding in-segment entry."
+    ::= { mplsTunnelManResEntry 5 }
+
+mplsTunnelManResMeanBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mean burst size in bytes. The implementations
+         which do not implement this variable must return 0
+         for this value and must not allow a user to set
+         this value."
+    ::= { mplsTunnelManResEntry 6 }
+
+mplsTunnelManResExBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Excess burst size in bytes. The implementations
+         which do not implement this variable must return
+         noSuchObject(0) exception for this object and must
+         not allow a user to set this value."
+    REFERENCE   
+        "CR-LDP Specification, Section 4.3."
+    ::= { mplsTunnelManResEntry 7 }
+
+mplsTeObjectReserved13 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 13 }
+
+mplsTunnelAutoResTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsTunnelAutoResEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Similar to mplsTunnelManResTable but for automatic tunnels."
+    ::= { mplsTeObjects 14 }
+
+mplsTunnelAutoResEntry OBJECT-TYPE
+    SYNTAX      MplsTunnelAutoResEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsTunnelAutoResIndex }
+    ::= { mplsTunnelAutoResTable 1 }
+
+MplsTunnelAutoResEntry ::= SEQUENCE {
+    mplsTunnelAutoResIndex          Unsigned32,
+    mplsTunnelAutoResMaxRate        MplsBitRate,
+    mplsTunnelAutoResMeanRate       MplsBitRate,
+    mplsTunnelAutoResMaxBurstSize   MplsBurstSize,
+    mplsTunnelAutoResMeanBurstSize  MplsBurstSize,
+    mplsTunnelAutoResExBurstSize    MplsBurstSize
+}
+
+mplsTunnelAutoResIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1073610752..1073741823)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelAutoResEntry 1 }
+
+mplsTunnelAutoResMaxRate OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelAutoResEntry 2 }
+
+mplsTunnelAutoResMeanRate OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelAutoResEntry 3 }
+
+mplsTunnelAutoResMaxBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelAutoResEntry 4 }
+
+mplsTunnelAutoResMeanBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelAutoResEntry 5 }
+
+mplsTunnelAutoResExBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelAutoResEntry 6 }
+
+mplsTeObjectReserved15 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 15 }
+
+mplsTunnelDynResTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsTunnelDynResEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Similar to mplsTunnelManResTable but for dynamic tunnels."
+    ::= { mplsTeObjects 16 }
+
+mplsTunnelDynResEntry OBJECT-TYPE
+    SYNTAX      MplsTunnelDynResEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsTunnelDynResIndex }
+    ::= { mplsTunnelDynResTable 1 }
+
+MplsTunnelDynResEntry ::= SEQUENCE {
+    mplsTunnelDynResIndex           Unsigned32,
+    mplsTunnelDynResMaxRate         MplsBitRate,
+    mplsTunnelDynResMeanRate        MplsBitRate,
+    mplsTunnelDynResMaxBurstSize    MplsBurstSize,
+    mplsTunnelDynResMeanBurstSize   MplsBurstSize,
+    mplsTunnelDynResExBurstSize     MplsBurstSize,
+    mplsTunnelDynResStorageType     MplsTunnelStorageType
+}
+
+mplsTunnelDynResIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (1073741824..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelDynResEntry 1 }
+
+mplsTunnelDynResMaxRate OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelDynResEntry 2 }
+
+mplsTunnelDynResMeanRate OBJECT-TYPE
+    SYNTAX      MplsBitRate
+    UNITS       "1000s of bits per second"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelDynResEntry 3 }
+
+mplsTunnelDynResMaxBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelDynResEntry 4 }
+
+mplsTunnelDynResMeanBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelDynResEntry 5 }
+
+mplsTunnelDynResExBurstSize OBJECT-TYPE
+    SYNTAX      MplsBurstSize
+    UNITS       "bytes"
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelDynResEntry 6 }
+
+mplsTunnelDynResStorageType OBJECT-TYPE
+    SYNTAX      MplsTunnelStorageType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "See similar object in mplsTunnelManResTable."
+    ::= { mplsTunnelDynResEntry 7 }
+
+mplsTeObjectReserved17 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 17 }
+
+mplsTunnelARHopTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsTunnelARHopEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The mplsTunnelARHopTable is used to indicate the
+         hops, strict or loose, for an MPLS tunnel defined in
+         any of the three mplsTunnelTables, as reported by the
+         MPLS signaling protocol, for the outgoing direction of
+         the tunnel. Each row in this table is indexed by
+         mplsTunnelARHopListIndex. Each row also has a
+         secondary index mplsTunnelARHopIndex, corresponding
+         to the next hop that this row corresponds to. The
+         first row in the table is the first hop after the
+         origination point of the tunnel. In case we want
+         to specify a particular interface on the
+         originating LSR of an outgoing tunnel by which we
+         want packets to exit the LSR, we specify this as
+         the first hop for this tunnel in
+         mplsTunnelARHopTable.
+         
+         Please note that since the information necessary to
+         build entries within this table are not provided by
+         some MPLS signaling protocols, implementation of
+         this table is optional. Furthermore, since the
+         information in this table is actually provided by
+         the MPLS signaling protocol after the path has been
+         set-up, the entries in this table are provided only
+         for observation, and hence, all variables in this
+         table are accessible exclusively as read-only."
+    ::= { mplsTeObjects 18 }
+
+mplsTunnelARHopEntry OBJECT-TYPE
+    SYNTAX      MplsTunnelARHopEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table represents a tunnel hop. An
+         entry is created by a network administrator for
+         signaled ERLSP set up by an MPLS signaling
+         protocol."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsTunnelARHopListIndex, 
+                  mplsTunnelARHopIndex }
+    ::= { mplsTunnelARHopTable 1 }
+
+MplsTunnelARHopEntry ::= SEQUENCE {
+    mplsTunnelARHopListIndex    MplsPathIndex,
+    mplsTunnelARHopIndex        MplsPathIndex,
+    mplsTunnelARHopAddrType     TeHopAddressType,
+    mplsTunnelARHopIpAddr       TeHopAddress
+}
+
+mplsTunnelARHopListIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Primary index into this table identifying a
+         particular recorded hop list."
+    ::= { mplsTunnelARHopEntry 1 }
+
+mplsTunnelARHopIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Secondary index into this table identifying the
+         particular hop."
+    ::= { mplsTunnelARHopEntry 2 }
+
+mplsTunnelARHopAddrType OBJECT-TYPE
+    SYNTAX      TeHopAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Hop Address Type of this tunnel hop.
+         
+         If the type value is set to ipv4(1) or ipv6(2). The tunnel path
+         can be determin using mplsTunnelARHopIpAddr object.
+         mplsTunnelARHopAddrUnnum and mplsTunnelARHopLspId
+         should not be used.
+         
+         If the type value is set to unnum(4) or unnumv6(6). The tunnel path
+         can be determin using mplsTunnelARHopAddrUnnum object.
+         mplsTunnelARHopIpAddr and mplsTunnelARHopLspId
+         should not be used.
+         
+         Note that lspid(5) is a valid option only
+         for tunnels signaled via CRLDP. The tunnel path
+         can be determin using mplsTunnelARHopLspId object.
+         mplsTunnelARHopIpAddr and mplsTunnelARHopAddrUnnum
+         should not be used.
+         
+         Currently only ipv4(1) type is supported"
+    ::= { mplsTunnelARHopEntry 3 }
+
+mplsTunnelARHopIpAddr OBJECT-TYPE
+    SYNTAX      TeHopAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Tunnel Hop Address for this tunnel hop.
+         
+         The type of this address is determined by the
+         value of the corresponding mplsTunnelARHopAddrType.
+         If mplsTunnelARHopAddrType is set to ipv4(1) or
+         ipv6(2), then this value contains the LSR Router
+         ID of the unnumbered interface. Otherwise the agent
+         SHOULD set this object to the zero-length string
+         and the manager should ignore this object."
+    ::= { mplsTunnelARHopEntry 4 }
+
+mplsTeObjectReserved19 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 19 }
+
+mplsTunnelCHopTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF MplsTunnelCHopEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The mplsTunnelCHopTable is used to indicate the
+         hops, strict or loose, for an MPLS tunnel defined in
+         any of three mplsManTunnelTables, as computed by a
+         constraint-based routing protocol, based on the
+         mplsTunnelManHopTable for the outgoing direction of
+         the tunnel. Each row in this table is indexed by
+         mplsTunnelCHopListIndex. Each row also has a
+         secondary index mplsTunnelCHopIndex, corresponding
+         to the next hop that this row corresponds to. The
+         first row in the table is the first hop after the
+         origination point of the tunnel. In case we want
+         to specify a particular interface on the
+         originating LSR of an outgoing tunnel by which we
+         want packets to exit the LSR, we specify this as
+         the first hop for this tunnel in
+         mplsTunnelCHopTable.
+         
+         Please note that since the information necessary to
+         build entries within this table may not be
+         supported by some LSRs, implementation of this
+         table is optional. Furthermore, since the
+         information in this table is actually provided by
+         routing protocol after the path has been computed,
+         the entries in this table are provided only for
+         observation, and hence, all variables in this table
+         are accessible exclusively as read-only."
+    ::= { mplsTeObjects 20 }
+
+mplsTunnelCHopEntry OBJECT-TYPE
+    SYNTAX      MplsTunnelCHopEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table represents a tunnel hop. An
+         entry in this table is created by a constraint-
+         based routing protocol based on the hops specified
+         in the corresponding mplsTunnelManHopTable."
+    INDEX       { prvtMplsTeMibEntityIndex, mplsTunnelCHopListIndex, 
+                  mplsTunnelCHopIndex }
+    ::= { mplsTunnelCHopTable 1 }
+
+MplsTunnelCHopEntry ::= SEQUENCE {
+    mplsTunnelCHopListIndex     MplsPathIndex,
+    mplsTunnelCHopIndex         MplsPathIndex,
+    mplsTunnelCHopAddrType      TeHopAddressType,
+    mplsTunnelCHopIpAddr        TeHopAddress,
+    mplsTunnelCHopIpPrefixLen   Unsigned32,
+    mplsTunnelCHopType          INTEGER
+}
+
+mplsTunnelCHopListIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Primary index into this table identifying a
+         particular computed hop list."
+    ::= { mplsTunnelCHopEntry 1 }
+
+mplsTunnelCHopIndex OBJECT-TYPE
+    SYNTAX      MplsPathIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Secondary index into this table identifying the
+         particular hop."
+    ::= { mplsTunnelCHopEntry 2 }
+
+mplsTunnelCHopAddrType OBJECT-TYPE
+    SYNTAX      TeHopAddressType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Hop Address Type of this tunnel hop.
+         
+         Note that lspid(5) is a valid option only
+         for tunnels signaled via CRLDP."
+    ::= { mplsTunnelCHopEntry 3 }
+
+mplsTunnelCHopIpAddr OBJECT-TYPE
+    SYNTAX      TeHopAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Tunnel Hop Address for this tunnel hop.
+         
+         The type of this address is determined by the
+         value of the corresponding mplsTunnelCHopAddrType.
+         
+         If mplsTunnelCHopAddrType is set to unnum(4) or
+         unnumv6(6), then this value will contain the LSR
+         Router ID of the unnumbered interface. Otherwise
+         the agent should set this object to the zero-length
+         string and the manager SHOULD ignore this object."
+    ::= { mplsTunnelCHopEntry 4 }
+
+mplsTunnelCHopIpPrefixLen OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "If mplsTunnelCHopAddrType is set to ipv4(1) or
+         ipv6(2), then this value will contain an
+         appropriate prefix length for the IP address in
+         object mplsTunnelCHopIpAddr. Otherwise this value
+         is irrelevant and should be ignored."
+    ::= { mplsTunnelCHopEntry 5 }
+
+mplsTunnelCHopType OBJECT-TYPE
+    SYNTAX      INTEGER { strict(1), loose(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Denotes whether this is tunnel hop is routed in a
+         strict or loose fashion."
+    ::= { mplsTunnelCHopEntry 6 }
+
+mplsTeObjectReserved21 OBJECT-TYPE
+    SYNTAX      MplsTeObjectReservedTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object is reserved for future use."
+    ::= { mplsTeObjects 21 }
+
+prvtMplsTunnelTrapEnableTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtMplsTunnelTrapEnableEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The prvtMplsTunnelTrapEnable Table allows a manager to
+         enable or disable TRAPs."
+    ::= { mplsTeObjects 22 }
+
+prvtMplsTunnelTrapEnableEntry OBJECT-TYPE
+    SYNTAX      PrvtMplsTunnelTrapEnableEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in this table is used to configure trap support for this
+         instance of TE-MIB"
+    INDEX       { prvtMplsTeMibEntityIndex }
+    ::= { prvtMplsTunnelTrapEnableTable 1 }
+
+PrvtMplsTunnelTrapEnableEntry ::= SEQUENCE {
+    prvtMplsTunnelTrapEnableValue   TruthValue
+}
+
+prvtMplsTunnelTrapEnableValue OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "If this object is true, then it enables the
+         generation of mplsTunnelUp and mplsTunnelDown
+         traps, otherwise these traps are not emitted."
+    ::= { prvtMplsTunnelTrapEnableEntry 1 }
+
+mplsManTunnelUp NOTIFICATION-TYPE
+    OBJECTS     { mplsManTunnelAdminStatus, mplsManTunnelOperStatus, 
+                  mplsManTunnelName }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a
+         mplsManTunnelOperStatus object for one of the
+         configured tunnels is about to leave the down state
+         and transition into some other state (but not into
+         the notPresent state). This other state is
+         indicated by the included value of
+         mplsManTunnelOperStatus.
+         
+         This structure is the same as the generic
+         AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifications 1 }
+
+mplsManTunnelDown NOTIFICATION-TYPE
+    OBJECTS     { mplsManTunnelAdminStatus, mplsManTunnelOperStatus, 
+                  mplsManTunnelName }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a
+         mplsManTunnelOperStatus object for one of the
+         configured tunnels is about to enter the down state
+         from some other state (but not from the notPresent
+         state). This other state is indicated by the
+         included value of mplsManTunnelOperStatus.
+         
+         This structure is the same as the generic
+         AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifications 2 }
+
+mplsAutoTunnelUp NOTIFICATION-TYPE
+    OBJECTS     { mplsAutoTunnelOperStatus, mplsAutoTunnelName }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a
+         mplsAutoTunnelOperStatus object for one of the
+         configured tunnels is about to leave the down state
+         and transition into some other state (but not into
+         the notPresent state). This other state is
+         indicated by the included value of
+         mplsAutoTunnelOperStatus.
+         
+         This structure is the same as the generic
+         AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifications 3 }
+
+mplsAutoTunnelDown NOTIFICATION-TYPE
+    OBJECTS     { mplsAutoTunnelOperStatus, mplsAutoTunnelName }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a
+         mplsAutoTunnelOperStatus object for one of the
+         configured tunnels is about to enter the down state
+         from some other state (but not from the notPresent
+         state). This other state is indicated by the
+         included value of mplsAutoTunnelOperStatus.
+         
+         This structure is the same as the generic
+         AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifications 4 }
+
+mplsDynTunnelUp NOTIFICATION-TYPE
+    OBJECTS     { mplsDynTunnelAdminStatus, mplsDynTunnelOperStatus, 
+                  mplsDynTunnelName }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a
+         mplsDynTunnelOperStatus object for one of the
+         configured tunnels is about to leave the down state
+         and transition into some other state (but not into
+         the notPresent state). This other state is
+         indicated by the included value of
+         mplsDynTunnelOperStatus.
+         
+         This structure is the same as the generic
+         AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifications 5 }
+
+mplsDynTunnelDown NOTIFICATION-TYPE
+    OBJECTS     { mplsDynTunnelAdminStatus, mplsDynTunnelOperStatus, 
+                  mplsDynTunnelName }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a
+         mplsDynTunnelOperStatus object for one of the
+         configured tunnels is about to enter the down state
+         from some other state (but not from the notPresent
+         state). This other state is indicated by the
+         included value of mplsDynTunnelOperStatus.
+         
+         This structure is the same as the generic
+         AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifications 6 }
+
+mplsManTunnelReoptimized NOTIFICATION-TYPE
+    OBJECTS     { mplsManTunnelAdminStatus, mplsManTunnelOperStatus, 
+                  mplsManTunnelARHopTableIndex, mplsManTunnelName }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a tunnel is
+         reoptimized. If the mplsTunnelARHopTable is used,
+         then this tunnel instance's entry in the
+         mplsTunnelARHopTable MAY contain the new path for
+         this tunnel some time after this trap is issued by
+         the agent.
+         
+         This structure is the same as the generic
+         AMB_MPLS_TUNNEL_TRAP_COMMON."
+    ::= { mplsTeNotifications 7 }
+
+END -- end of module PRVT-MPLS-TE-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-OSPF-MIB b/MIBS/telco-systems/binox/PRVT-OSPF-MIB
new file mode 100644
index 0000000..f7d2ae0
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-OSPF-MIB
@@ -0,0 +1,1337 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-OSPF-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-OSPF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    routingProtocols
+        FROM PRVT-SWITCH-MIB
+    Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, 
+    OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtOspfMIB MODULE-IDENTITY
+    LAST-UPDATED "201204010000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The PRVT OSPF MIB module contains additional information, needed to
+         control the OSPF protocol, that is not found in the standard RFC"
+    REVISION    "201204010000Z"
+    DESCRIPTION 
+        "Area ID is represent as octet string"
+    REVISION    "201106020000Z"
+    DESCRIPTION 
+        "Added prvtOspfTrafficEngEnable"
+    REVISION    "200911130000Z"
+    DESCRIPTION 
+        "Initial version"
+    ::= { routingProtocols 2 }
+
+
+PrvtOspfDesignatedRouterPriority ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The values defined for the priority of a system for
+         becoming the designated router."
+    SYNTAX      Integer32 (0..255)
+
+PrvtOspfIpAddress ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d"
+    STATUS      current
+    DESCRIPTION 
+        "An IP address.
+         Currently only IPv4 network addresses are supported.
+         Format for IPv4 addresses consist of 4 octets in network-byte order."
+    SYNTAX      OCTET STRING (SIZE(4 | 16))
+
+prvtOspfObjects OBJECT IDENTIFIER
+    ::= { prvtOspfMIB 1 }
+
+prvtOspfRouterId OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "A 32-bit integer uniquely identifying the
+         router in the Autonomous System.
+         By convention, to ensure uniqueness, this
+         should default to the value of one of the
+         router's IP interface addresses."
+    REFERENCE   
+        "OSPF Version 2, C.1 Global parameters"
+    ::= { prvtOspfObjects 1 }
+
+prvtOspfAdminStat OBJECT-TYPE
+    SYNTAX      INTEGER { enabled(1), disabled(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The administrative status of OSPF in the
+         router. The value 'enabled' denotes that the
+         OSPF Process is active on at least one interface;
+         'disabled' disables it on all interfaces."
+    ::= { prvtOspfObjects 2 }
+
+prvtOspfVersionNumber OBJECT-TYPE
+    SYNTAX      INTEGER { version2(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current version number of the OSPF
+         protocol is 2."
+    REFERENCE   
+        "OSPF Version 2, Title"
+    ::= { prvtOspfObjects 3 }
+
+prvtOspfExternLsaCount OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of external (LS type 5) link-state
+         advertisements in the link-state database."
+    REFERENCE   
+        "OSPF Version 2, Appendix A.4.5 AS external link
+         advertisements"
+    ::= { prvtOspfObjects 4 }
+
+prvtOspfExternLsaCksumSum OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The 32-bit unsigned sum of the LS checksums of
+         the external link-state advertisements contained
+         in the link-state database. This sum
+         can be used to determine if there has been a
+         change in a router's link state database, and
+         to compare the link-state database of two
+         routers."
+    ::= { prvtOspfObjects 5 }
+
+prvtOspfTOSSupport OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The router's support for type-of-service routing."
+    REFERENCE   
+        "OSPF Version 2, Appendix F.1.2 Optional TOS
+         support"
+    ::= { prvtOspfObjects 6 }
+
+prvtOspfOriginateNewLsas OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of new link-state advertisements
+         that have been originated. This number is
+         incremented each time the router originates a
+         new LSA."
+    ::= { prvtOspfObjects 7 }
+
+prvtOspfRxNewLsas OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of link-state advertisements re-
+         ceived determined to be new instantiations.
+         This number does not include newer instantia-
+         tions of self-originated link-state advertise-
+         ments."
+    ::= { prvtOspfObjects 8 }
+
+prvtOspfExtLsdbLimit OBJECT-TYPE
+    SYNTAX      Integer32 (-1..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The maximum number of non-default AS-
+         external-LSAs entries that can be stored in the
+         link-state database. If the value is -1, then
+         there is no limit.
+         When the number of non-default AS-external-LSAs
+         in a router's link-state database reaches
+         ospfExtLsdbLimit, the router enters Overflow-
+         State. The router never holds more than
+         ospfExtLsdbLimit non-default AS-external-LSAs
+         in its database. OspfExtLsdbLimit MUST be set
+         identically in all routers attached to the OSPF
+         backbone and/or any regular OSPF area. (i.e.,
+         OSPF stub areas and NSSAs are excluded)."
+    ::= { prvtOspfObjects 9 }
+
+prvtOspfMulticastExtensions OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A Bit Mask indicating whether the router is
+         forwarding IP multicast (Class D) datagrams
+         based on the algorithms defined in the Multi-
+         cast Extensions to OSPF.
+         Bit 0, if set, indicates that the router can
+         forward IP multicast datagrams in the router's
+         directly attached areas (called intra-area mul-
+         ticast routing).
+         Bit 1, if set, indicates that the router can
+         forward IP multicast datagrams between OSPF
+         areas (called inter-area multicast routing).
+         Bit 2, if set, indicates that the router can
+         forward IP multicast datagrams between Auto-
+         nomous Systems (called inter-AS multicast rout-
+         ing).
+         Only certain combinations of bit settings are
+         allowed, namely: 0 (no multicast forwarding is
+         enabled), 1 (intra-area multicasting only), 3
+         (intra-area and inter-area multicasting), 5
+         (intra-area and inter-AS multicasting) and 7
+         (multicasting everywhere). By default, no mul-
+         ticast forwarding is enabled."
+    ::= { prvtOspfObjects 10 }
+
+prvtOspfExitOverflowInterval OBJECT-TYPE
+    SYNTAX      Integer32 (0..2147483647)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The number of seconds that, after entering
+         OverflowState, a router will attempt to leave
+         OverflowState. This allows the router to again
+         originate non-default AS-external-LSAs. When
+         set to 0, the router will not leave Overflow-
+         State until restarted."
+    ::= { prvtOspfObjects 11 }
+
+prvtOspfDemandExtensions OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The router's support for demand routing."
+    REFERENCE   
+        "OSPF Version 2, Appendix on Demand Routing"
+    ::= { prvtOspfObjects 12 }
+
+prvtOspfAreaTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfAreaEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information describing the configured parameters
+         and cumulative statistics of the router's
+         attached areas."
+    REFERENCE   
+        "OSPF Version 2, Section 6 The Area Data
+         Structure"
+    ::= { prvtOspfObjects 13 }
+
+prvtOspfAreaEntry OBJECT-TYPE
+    SYNTAX      PrvtOspfAreaEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information describing the configured
+         parameters and cumulative statistics
+         of one of the router's attached areas."
+    INDEX       { prvtOspfAreaId }
+    ::= { prvtOspfAreaTable 1 }
+
+PrvtOspfAreaEntry ::= SEQUENCE {
+    prvtOspfAreaId                      OCTET STRING,
+    prvtOspfAreaRowStatus               RowStatus,
+    prvtOspfAreaType                    INTEGER,
+    prvtOspfAreaSummary                 INTEGER,
+    prvtOspfAreaAuthType                INTEGER,
+    prvtOspfAreaShortcutConfiguration   TruthValue,
+    prvtOspfAreaNssaTransitRole         INTEGER,
+    prvtOspfAreaImportList              OCTET STRING,
+    prvtOspfAreaExportList              OCTET STRING,
+    prvtOspfAreaMetric                  Integer32,
+    prvtOspfAreaMetricType              INTEGER,
+    prvtOspfAreaDefaultCost             Integer32
+}
+
+prvtOspfAreaId OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An octet string, uniquely identifying area.
+         Both A.B.C.D or integer notations are supported.
+         Area ID 0.0.0.0 is used for the OSPF backbone."
+    REFERENCE   
+        "OSPF Version 2, Appendix C.2 Area parameters"
+    ::= { prvtOspfAreaEntry 1 }
+
+prvtOspfAreaRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This variable displays the status of the en-
+         try. Setting it to 'invalid' has the effect of
+         rendering it inoperative. The internal effect
+         (row removal) is implementation dependent."
+    ::= { prvtOspfAreaEntry 2 }
+
+prvtOspfAreaType OBJECT-TYPE
+    SYNTAX      INTEGER { default(0), stub(1), nssa(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The area type"
+    ::= { prvtOspfAreaEntry 3 }
+
+prvtOspfAreaSummary OBJECT-TYPE
+    SYNTAX      INTEGER { noAreaSummary(1), sendAreaSummary(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The variable ospfAreaSummary controls the im-
+         port of summary LSAs into stub areas. It has
+         no effect on other areas.
+         If it is noAreaSummary, the router will neither
+         originate nor propagate summary LSAs into the
+         stub area. It will rely entirely on its de-
+         fault route.
+         If it is sendAreaSummary, the router will both
+         summarize and propagate summary LSAs."
+    ::= { prvtOspfAreaEntry 4 }
+
+prvtOspfAreaAuthType OBJECT-TYPE
+    SYNTAX      INTEGER { simple(1), md5(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The authentication type specified for an area.
+         Additional authentication types may be assigned
+         locally on a per Area basis."
+    ::= { prvtOspfAreaEntry 5 }
+
+prvtOspfAreaShortcutConfiguration OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Allows the user to set whether the area
+         allows the traffict to pass through other
+         not backbone area"
+    ::= { prvtOspfAreaEntry 6 }
+
+prvtOspfAreaNssaTransitRole OBJECT-TYPE
+    SYNTAX      INTEGER { ospfNssaRoleNever(0), ospfNssaRoleAlways(1), 
+                    ospfNssaRoleCandidate(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Transit role"
+    ::= { prvtOspfAreaEntry 7 }
+
+prvtOspfAreaImportList OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Import List"
+    ::= { prvtOspfAreaEntry 8 }
+
+prvtOspfAreaExportList OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Export List"
+    ::= { prvtOspfAreaEntry 9 }
+
+prvtOspfAreaMetric OBJECT-TYPE
+    SYNTAX      Integer32 (0..16777215)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Area metric"
+    ::= { prvtOspfAreaEntry 10 }
+
+prvtOspfAreaMetricType OBJECT-TYPE
+    SYNTAX      INTEGER { ospfMetric(1), comparableCost(2), 
+                    nonComparable(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Area metric type"
+    ::= { prvtOspfAreaEntry 11 }
+
+prvtOspfAreaDefaultCost OBJECT-TYPE
+    SYNTAX      Integer32 (0..16777215)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Default cost"
+    ::= { prvtOspfAreaEntry 12 }
+
+prvtOspfLsdbTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfLsdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The OSPF Process's Link State Database."
+    REFERENCE   
+        "OSPF Version 2, Section 12 Link State Adver-
+         tisements"
+    ::= { prvtOspfObjects 14 }
+
+prvtOspfLsdbEntry OBJECT-TYPE
+    SYNTAX      PrvtOspfLsdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A single Link State Advertisement."
+    INDEX       { prvtOspfLsdbAreaId, prvtOspfLsdbType, prvtOspfLsdbLsid, 
+                  prvtOspfLsdbRouterId }
+    ::= { prvtOspfLsdbTable 1 }
+
+PrvtOspfLsdbEntry ::= SEQUENCE {
+    prvtOspfLsdbAreaId          IpAddress,
+    prvtOspfLsdbType            INTEGER,
+    prvtOspfLsdbLsid            IpAddress,
+    prvtOspfLsdbRouterId        IpAddress,
+    prvtOspfLsdbSequence        Integer32,
+    prvtOspfLsdbAge             Integer32,
+    prvtOspfLsdbChecksum        Integer32,
+    prvtOspfLsdbLength          Integer32,
+    prvtOspfLsdbAdvertisement   OCTET STRING
+}
+
+prvtOspfLsdbAreaId OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The 32 bit identifier of the Area from which
+         the LSA was received."
+    REFERENCE   
+        "OSPF Version 2, Appendix C.2 Area parameters"
+    ::= { prvtOspfLsdbEntry 1 }
+
+prvtOspfLsdbType OBJECT-TYPE
+    SYNTAX      INTEGER { routerLink(1), networkLink(2), summaryLink(3), 
+                    asSummaryLink(4), asExternalLink(5), 
+                    multicastLink(6), nssaExternalLink(7), 
+                    unknownLink(8), opaqueLinkLsa(9), opaqueAreaLsa(10), 
+                    opaqueAsLsa(11) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type of the link state advertisement.
+         Each link state type has a separate
+         advertisement format."
+    REFERENCE   
+        "OSPF Version 2, Appendix A.4.1 The Link State
+         Advertisement header"
+    ::= { prvtOspfLsdbEntry 2 }
+
+prvtOspfLsdbLsid OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Link State ID is an LS Type Specific field
+         containing either a Router ID or an IP Address;
+         it identifies the piece of the routing domain
+         that is being described by the advertisement."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.4 Link State ID"
+    ::= { prvtOspfLsdbEntry 3 }
+
+prvtOspfLsdbRouterId OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The 32 bit number that uniquely identifies the
+         originating router in the Autonomous System."
+    REFERENCE   
+        "OSPF Version 2, Appendix C.1 Global parameters"
+    ::= { prvtOspfLsdbEntry 4 }
+
+prvtOspfLsdbSequence OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The sequence number field is a signed 32-bit
+         integer. It is used to detect old and duplicate
+         link state advertisements. The space of
+         sequence numbers is linearly ordered. The
+         larger the sequence number the more recent the
+         advertisement."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.6 LS sequence
+         number"
+    ::= { prvtOspfLsdbEntry 5 }
+
+prvtOspfLsdbAge OBJECT-TYPE
+    SYNTAX      Integer32 (-32768..32767)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This field is the age of the link state
+         advertisement in seconds."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.1 LS age"
+    ::= { prvtOspfLsdbEntry 6 }
+
+prvtOspfLsdbChecksum OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This field is the checksum of the complete
+         contents of the advertisement, excepting the
+         age field. The age field is excepted so that
+         an advertisement's age can be incremented
+         without updating the checksum. The checksum
+         used is the same that is used for ISO
+         connectionless datagrams; it is commonly
+         referred to as the Fletcher checksum."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.7 LS checksum"
+    ::= { prvtOspfLsdbEntry 7 }
+
+prvtOspfLsdbLength OBJECT-TYPE
+    SYNTAX      Integer32 (-32768..32767)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The length of the ospf packet"
+    ::= { prvtOspfLsdbEntry 8 }
+
+prvtOspfLsdbAdvertisement OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The entire Link State Advertisement,
+         including its header."
+    REFERENCE   
+        "OSPF Version 2, Section 12 Link State
+         Advertisements"
+    ::= { prvtOspfLsdbEntry 9 }
+
+prvtOspfExtLsdbTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfExtLsdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The OSPF Process's Links State Database."
+    REFERENCE   
+        "OSPF Version 2, Section 12 Link State Adver-
+         tisements"
+    ::= { prvtOspfObjects 15 }
+
+prvtOspfExtLsdbEntry OBJECT-TYPE
+    SYNTAX      PrvtOspfExtLsdbEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A single Link State Advertisement."
+    INDEX       { prvtOspfExtLsdbType, prvtOspfExtLsdbLsid, 
+                  prvtOspfExtLsdbRouterId }
+    ::= { prvtOspfExtLsdbTable 1 }
+
+PrvtOspfExtLsdbEntry ::= SEQUENCE {
+    prvtOspfExtLsdbType             INTEGER,
+    prvtOspfExtLsdbLsid             IpAddress,
+    prvtOspfExtLsdbRouterId         IpAddress,
+    prvtOspfExtLsdbSequence         Integer32,
+    prvtOspfExtLsdbAge              Integer32,
+    prvtOspfExtLsdbChecksum         Integer32,
+    prvtOspfExtLsdbAdvertisement    OCTET STRING
+}
+
+prvtOspfExtLsdbType OBJECT-TYPE
+    SYNTAX      INTEGER { routerLink(1), networkLink(2), summaryLink(3), 
+                    asSummaryLink(4), asExternalLink(5), 
+                    multicastLink(6), nssaExternalLink(7), 
+                    unknownLink(8), opaqueLinkLsa(9), opaqueAreaLsa(10), 
+                    opaqueAsLsa(11) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type of the link state advertisement.
+         Each link state type has a separate advertise-
+         ment format."
+    REFERENCE   
+        "OSPF Version 2, Appendix A.4.1 The Link State
+         Advertisement header"
+    ::= { prvtOspfExtLsdbEntry 1 }
+
+prvtOspfExtLsdbLsid OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Link State ID is an LS Type Specific field
+         containing either a Router ID or an IP Address;
+         it identifies the piece of the routing domain
+         that is being described by the advertisement."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.4 Link State ID"
+    ::= { prvtOspfExtLsdbEntry 2 }
+
+prvtOspfExtLsdbRouterId OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The 32 bit number that uniquely identifies the
+         originating router in the Autonomous System."
+    REFERENCE   
+        "OSPF Version 2, Appendix C.1 Global parameters"
+    ::= { prvtOspfExtLsdbEntry 3 }
+
+prvtOspfExtLsdbSequence OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The sequence number field is a signed 32-bit
+         integer. It is used to detect old and duplicate
+         link state advertisements. The space of
+         sequence numbers is linearly ordered. The
+         larger the sequence number the more recent the
+         advertisement."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.6 LS sequence
+         number"
+    ::= { prvtOspfExtLsdbEntry 4 }
+
+prvtOspfExtLsdbAge OBJECT-TYPE
+    SYNTAX      Integer32 (-32768..32767)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This field is the age of the link state
+         advertisement in seconds."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.1 LS age"
+    ::= { prvtOspfExtLsdbEntry 5 }
+
+prvtOspfExtLsdbChecksum OBJECT-TYPE
+    SYNTAX      Integer32 (0..65535)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This field is the checksum of the complete
+         contents of the advertisement, excepting the
+         age field. The age field is excepted so that
+         an advertisement's age can be incremented
+         without updating the checksum. The checksum
+         used is the same that is used for ISO
+         connectionless datagrams; it is commonly referred
+         to as the Fletcher checksum."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.7 LS checksum"
+    ::= { prvtOspfExtLsdbEntry 6 }
+
+prvtOspfExtLsdbAdvertisement OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The entire Link State Advertisement, including
+         its header."
+    REFERENCE   
+        "OSPF Version 2, Section 12 Link State Adver-
+         tisements"
+    ::= { prvtOspfExtLsdbEntry 7 }
+
+prvtOspfIfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The OSPF Interface Table describes the inter-
+         faces from the viewpoint of OSPF."
+    REFERENCE   
+        "OSPF Version 2, Appendix C.3 Router interface
+         parameters"
+    ::= { prvtOspfObjects 16 }
+
+prvtOspfIfEntry OBJECT-TYPE
+    SYNTAX      PrvtOspfIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The OSPF Interface Entry describes one inter-
+         face from the viewpoint of OSPF."
+    INDEX       { prvtOspfIfIpAddress }
+    ::= { prvtOspfIfTable 1 }
+
+PrvtOspfIfEntry ::= SEQUENCE {
+    prvtOspfIfIpAddress             IpAddress,
+    prvtOspfIfRowStatus             RowStatus,
+    prvtOspfIfAreaId                OCTET STRING,
+    prvtOspfIfWorkingMode           INTEGER,
+    prvtOspfIfTransitDelay          Integer32,
+    prvtOspfIfPriority              Integer32,
+    prvtOspfIfHelloTimer            Integer32,
+    prvtOspfIfDeadTimer             Integer32,
+    prvtOspfIfRetransmitInterval    Integer32,
+    prvtOspfIfOutputCost            Integer32,
+    prvtOspfIfAuthType              INTEGER,
+    prvtOspfIfAuthSimple            OCTET STRING,
+    prvtOspfIfType                  INTEGER
+}
+
+prvtOspfIfIpAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The IP address of this OSPF interface."
+    ::= { prvtOspfIfEntry 1 }
+
+prvtOspfIfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This variable displays the status of the entry.
+         Setting it to 'invalid' has the effect of
+         rendering it inoperative. The internal effect
+         (row removal) is implementation dependent."
+    ::= { prvtOspfIfEntry 2 }
+
+prvtOspfIfAreaId OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An octet string, uniquely identifying area.
+         Both A.B.C.D or integer notations are supported. Area ID
+         0.0.0.0 is used for the OSPF backbone."
+    ::= { prvtOspfIfEntry 3 }
+
+prvtOspfIfWorkingMode OBJECT-TYPE
+    SYNTAX      INTEGER { active(0), passive(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Working mode"
+    ::= { prvtOspfIfEntry 4 }
+
+prvtOspfIfTransitDelay OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The estimated number of seconds it takes to
+         transmit a link state update packet over this
+         interface."
+    ::= { prvtOspfIfEntry 5 }
+
+prvtOspfIfPriority OBJECT-TYPE
+    SYNTAX      Integer32 (0..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The priority of this interface. Used in
+         multi-access networks, this field is used in
+         the designated router election algorithm. The
+         value 0 signifies that the router is not eligible
+         to become the designated router on this
+         particular network. In the event of a tie in
+         this value, routers will use their Router ID as
+         a tie breaker."
+    ::= { prvtOspfIfEntry 6 }
+
+prvtOspfIfHelloTimer OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The length of time, in seconds, between the
+         Hello packets that the router sends on the
+         interface. This value must be the same for all
+         routers attached to a common network."
+    ::= { prvtOspfIfEntry 7 }
+
+prvtOspfIfDeadTimer OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The number of seconds that a router's Hello
+         packets have not been seen before it's neigh-
+         bors declare the router down. This should be
+         some multiple of the Hello interval. This
+         value must be the same for all routers attached
+         to a common network."
+    ::= { prvtOspfIfEntry 8 }
+
+prvtOspfIfRetransmitInterval OBJECT-TYPE
+    SYNTAX      Integer32 (3..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The number of seconds between link-state ad-
+         vertisement retransmissions, for adjacencies
+         belonging to this interface. This value is
+         also used when retransmitting database descrip-
+         tion and link-state request packets."
+    ::= { prvtOspfIfEntry 9 }
+
+prvtOspfIfOutputCost OBJECT-TYPE
+    SYNTAX      Integer32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "No description in main model!"
+    ::= { prvtOspfIfEntry 10 }
+
+prvtOspfIfAuthType OBJECT-TYPE
+    SYNTAX      INTEGER { simple(1), md5(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set authentication type of interface.
+         If not set, will use the one from area!"
+    ::= { prvtOspfIfEntry 11 }
+
+prvtOspfIfAuthSimple OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..8))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Simple authentication password (key).Up to 8 characters"
+    ::= { prvtOspfIfEntry 12 }
+
+prvtOspfIfType OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), broadcast(1), nbma(2), 
+                    pointToPoint(3), pointToMultipoint(5), 
+                    virtualLink(6), loopback(7) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "No description in main model!"
+    ::= { prvtOspfIfEntry 13 }
+
+prvtOspfIfAuthMd5Table OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfIfAuthMd5Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table for configuring message digest authentication password"
+    ::= { prvtOspfObjects 17 }
+
+prvtOspfIfAuthMd5Entry OBJECT-TYPE
+    SYNTAX      PrvtOspfIfAuthMd5Entry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table rows"
+    INDEX       { prvtOspfIfIpAddress, prvtOspfIfAuthMd5Key }
+    ::= { prvtOspfIfAuthMd5Table 1 }
+
+PrvtOspfIfAuthMd5Entry ::= SEQUENCE {
+    prvtOspfIfAuthMd5Key        Integer32,
+    prvtOspfIfAuthMd5RowStatus  RowStatus,
+    prvtOspfIfAuthMd5Word       OCTET STRING
+}
+
+prvtOspfIfAuthMd5Key OBJECT-TYPE
+    SYNTAX      Integer32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Authentication key."
+    ::= { prvtOspfIfAuthMd5Entry 1 }
+
+prvtOspfIfAuthMd5RowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus."
+    ::= { prvtOspfIfAuthMd5Entry 2 }
+
+prvtOspfIfAuthMd5Word OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..16))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Authentication word."
+    ::= { prvtOspfIfAuthMd5Entry 3 }
+
+prvtOspfNbrTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfNbrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table of non-virtual neighbor information."
+    REFERENCE   
+        "OSPF Version 2, Section 10 The Neighbor Data Structure"
+    ::= { prvtOspfObjects 18 }
+
+prvtOspfNbrEntry OBJECT-TYPE
+    SYNTAX      PrvtOspfNbrEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The information regarding a single neighbor."
+    REFERENCE   
+        "OSPF Version 2, Section 10 The Neighbor Data Structure"
+    INDEX       { prvtOspfNbrIpAddr, prvtOspfNbrAddressLessIndex }
+    ::= { prvtOspfNbrTable 1 }
+
+PrvtOspfNbrEntry ::= SEQUENCE {
+    prvtOspfNbrIpAddr               PrvtOspfIpAddress,
+    prvtOspfNbrAddressLessIndex     Integer32,
+    prvtOspfNbrRtrId                PrvtOspfIpAddress,
+    prvtOspfNbrOptions              Integer32,
+    prvtOspfNbrPriority             PrvtOspfDesignatedRouterPriority,
+    prvtOspfNbrState                INTEGER,
+    prvtOspfNbrEvents               Counter32,
+    prvtOspfNbrLsRetransQLen        Gauge32,
+    prvtOspfNbmaNbrPermanence       INTEGER,
+    prvtOspfNbrHelloSuppressed      TruthValue
+}
+
+prvtOspfNbrIpAddr OBJECT-TYPE
+    SYNTAX      PrvtOspfIpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The IP address this neighbor is using in its
+         IP Source Address. Note that, on addressless
+         links, this will not be 0.0.0.0, but the ad-
+         dress of another of the neighbor's interfaces."
+    ::= { prvtOspfNbrEntry 1 }
+
+prvtOspfNbrAddressLessIndex OBJECT-TYPE
+    SYNTAX      Integer32 (-2147483648..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "On an interface having an IP Address, zero.
+         On addressless interfaces, the corresponding
+         value of ifIndex in the Internet Standard MIB.
+         On row creation, this can be derived from the
+         instance."
+    ::= { prvtOspfNbrEntry 2 }
+
+prvtOspfNbrRtrId OBJECT-TYPE
+    SYNTAX      PrvtOspfIpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A 32-bit integer (represented as a type IpAd-
+         dress) uniquely identifying the neighboring
+         router in the Autonomous System."
+    ::= { prvtOspfNbrEntry 3 }
+
+prvtOspfNbrOptions OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A Bit Mask corresponding to the neighbor's op-
+         tions field.
+         
+         Bit 0, if set, indicates that the system will
+         operate on Type of Service metrics other than
+         TOS 0. If zero, the neighbor will ignore all
+         metrics except the TOS 0 metric.
+         
+         Bit 1, if set, indicates that the associated
+         area accepts and operates on external informa-
+         tion; if zero, it is a stub area.
+         
+         Bit 2, if set, indicates that the system is ca-
+         pable of routing IP Multicast datagrams; i.e.,
+         that it implements the Multicast Extensions to
+         OSPF.
+         
+         Bit 3, if set, indicates that the associated
+         area is an NSSA. These areas are capable of
+         carrying type 7 external advertisements, which
+         are translated into type 5 external advertise-
+         ments at NSSA borders."
+    REFERENCE   
+        "OSPF Version 2, Section 12.1.2 Options"
+    ::= { prvtOspfNbrEntry 4 }
+
+prvtOspfNbrPriority OBJECT-TYPE
+    SYNTAX      PrvtOspfDesignatedRouterPriority
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The priority of this neighbor in the designat-
+         ed router election algorithm. The value 0 sig-
+         nifies that the neighbor is not eligible to be-
+         come the designated router on this particular
+         network."
+    ::= { prvtOspfNbrEntry 5 }
+
+prvtOspfNbrState OBJECT-TYPE
+    SYNTAX      INTEGER { down(1), attempt(2), init(3), twoWay(4), 
+                    exchangeStart(5), exchange(6), loading(7), full(8) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The State of the relationship with this Neigh-
+         bor."
+    REFERENCE   
+        "OSPF Version 2, Section 10.1 Neighbor States"
+    ::= { prvtOspfNbrEntry 6 }
+
+prvtOspfNbrEvents OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of times this neighbor relationship
+         has changed state, or an error has occurred."
+    ::= { prvtOspfNbrEntry 7 }
+
+prvtOspfNbrLsRetransQLen OBJECT-TYPE
+    SYNTAX      Gauge32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current length of the retransmission queue."
+    ::= { prvtOspfNbrEntry 8 }
+
+prvtOspfNbmaNbrPermanence OBJECT-TYPE
+    SYNTAX      INTEGER { dynamic(1), permanent(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This variable displays the status of the entry.
+         'dynamic' and 'permanent' refer to how
+         the neighbor became known."
+    ::= { prvtOspfNbrEntry 10 }
+
+prvtOspfNbrHelloSuppressed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicates whether Hellos are being suppressed
+         to the neighbor"
+    ::= { prvtOspfNbrEntry 11 }
+
+prvtOspfRedistributeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfRedistributeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table represents the routing protocols, redistributed into the OSPF 
+         routing domain.
+         
+         Creation of conceptual row in the table starts the redistribution of the 
+         specified protocol, which would lead to the injection of routing information 
+         from that protocol into the OSPF.
+         
+         Deletion of conceptual row would stop the redistribution of that protocol 
+         into the OSPF.
+         
+         OSPF router, which redistributes routing information from other 
+         protocols, is an ASBR router"
+    ::= { prvtOspfObjects 19 }
+
+prvtOspfRedistributeEntry OBJECT-TYPE
+    SYNTAX      PrvtOspfRedistributeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The conceptual row represents a routing protocol, redistributed into OSPF"
+    INDEX       { prvtOspfRedistributeProtocol }
+    ::= { prvtOspfRedistributeTable 1 }
+
+PrvtOspfRedistributeEntry ::= SEQUENCE {
+    prvtOspfRedistributeProtocol    INTEGER,
+    prvtOspfRedistributeRowStatus   RowStatus,
+    prvtOspfRedistributeMetric1     Integer32,
+    prvtOspfRedistributeMetric2     Integer32,
+    prvtOspfRedistributeRouteMap    OCTET STRING
+}
+
+prvtOspfRedistributeProtocol OBJECT-TYPE
+    SYNTAX      INTEGER { kernel(2), connected(3), static(4), 
+                    default(17) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The specific routes redistributed into OSPF. For T4R model the valid values 
+         are connected, rip and static.
+         For all the other models all of the above routes can be redistributed "
+    ::= { prvtOspfRedistributeEntry 1 }
+
+prvtOspfRedistributeRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Indicates the status of the row. Setting of this field to active enables the 
+         redistribution of the protocol.
+         
+         Setting this field to destroy disables the redistribution of the protocol."
+    ::= { prvtOspfRedistributeEntry 2 }
+
+prvtOspfRedistributeMetric1 OBJECT-TYPE
+    SYNTAX      Integer32 (0..16777215)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The metric 1, with which the external routes will be redistributed in the OSPF"
+    ::= { prvtOspfRedistributeEntry 3 }
+
+prvtOspfRedistributeMetric2 OBJECT-TYPE
+    SYNTAX      Integer32 (0..16777215)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The metric 2, with which the external routes will be redistributed in the OSPF"
+    ::= { prvtOspfRedistributeEntry 4 }
+
+prvtOspfRedistributeRouteMap OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The route map that would filter the redistributed routing information"
+    ::= { prvtOspfRedistributeEntry 5 }
+
+prvtOspfRouterDataTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfRouterDataEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about available routers"
+    ::= { prvtOspfObjects 20 }
+
+prvtOspfRouterDataEntry OBJECT-TYPE
+    SYNTAX      PrvtOspfRouterDataEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The conceptual row represents a routing entry"
+    INDEX       { prvtOspfRouterDataPrefix, prvtOspfRouterDataType, 
+                  prvtOspfRouterDataAreaId }
+    ::= { prvtOspfRouterDataTable 1 }
+
+PrvtOspfRouterDataEntry ::= SEQUENCE {
+    prvtOspfRouterDataPrefix            OCTET STRING,
+    prvtOspfRouterDataType              INTEGER,
+    prvtOspfRouterDataAreaId            OCTET STRING,
+    prvtOspfRouterDataId                IpAddress,
+    prvtOspfRouterDataCost              Unsigned32,
+    prvtOspfRouterDataCostType          Unsigned32,
+    prvtOspfRouterDataDestType          INTEGER,
+    prvtOspfRouterDataPathType          INTEGER,
+    prvtOspfRouterDataFlags             BITS,
+    prvtOspfRouterDataExternalRouting   INTEGER,
+    prvtOspfRouterDataTag               Integer32
+}
+
+prvtOspfRouterDataPrefix OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(5))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 1 }
+
+prvtOspfRouterDataType OBJECT-TYPE
+    SYNTAX      INTEGER { network(1), router(2), external(3) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 2 }
+
+prvtOspfRouterDataAreaId OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(4 | 16))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 3 }
+
+prvtOspfRouterDataId OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 4 }
+
+prvtOspfRouterDataCost OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 5 }
+
+prvtOspfRouterDataCostType OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 6 }
+
+prvtOspfRouterDataDestType OBJECT-TYPE
+    SYNTAX      INTEGER { router(1), network(2), disables(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 7 }
+
+prvtOspfRouterDataPathType OBJECT-TYPE
+    SYNTAX      INTEGER { intraArea(1), interArea(2), external1(3), 
+                    external3(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 8 }
+
+prvtOspfRouterDataFlags OBJECT-TYPE
+    SYNTAX      BITS { abr(0), asbr(1), virtual(2), unknown(3), nssa(4), 
+                    shortcut(5) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 9 }
+
+prvtOspfRouterDataExternalRouting OBJECT-TYPE
+    SYNTAX      INTEGER { default(0), stub(1), nssa(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 10 }
+
+prvtOspfRouterDataTag OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterDataEntry 11 }
+
+prvtOspfRouterPathTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtOspfRouterPathEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about available router's paths"
+    ::= { prvtOspfObjects 21 }
+
+prvtOspfRouterPathEntry OBJECT-TYPE
+    SYNTAX      PrvtOspfRouterPathEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The conceptual row represents a routing's path entry"
+    INDEX       { prvtOspfRouterDataPrefix, prvtOspfRouterDataType, 
+                  prvtOspfRouterDataAreaId, prvtOspfRouterPathNextHop }
+    ::= { prvtOspfRouterPathTable 1 }
+
+PrvtOspfRouterPathEntry ::= SEQUENCE {
+    prvtOspfRouterPathNextHop               OCTET STRING,
+    prvtOspfRouterPathAdvertisingRouter     OCTET STRING,
+    prvtOspfRouterPathInterfaceName         OCTET STRING
+}
+
+prvtOspfRouterPathNextHop OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(4 | 16))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterPathEntry 1 }
+
+prvtOspfRouterPathAdvertisingRouter OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(4 | 16))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterPathEntry 2 }
+
+prvtOspfRouterPathInterfaceName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Unknown in main data model"
+    ::= { prvtOspfRouterPathEntry 3 }
+
+prvtOspfTrafficEngEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable the traffic engineering extensions of OSPF.
+         Note that enabling traffic engineering requires that router interface lo1
+         (PRVT-SWITCH-IPVLAN-MIB::ipInterfaceIpAddress.lo1) be configured with a
+         valid IP address (not 0.0.0.0 or 127.0.0.1).  An attempt to enable traffic
+         engineering without such a valid address will fail (error returned)."
+    ::= { prvtOspfObjects 22 }
+
+END -- end of module PRVT-OSPF-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-PORTS-AGGREGATION-MIB b/MIBS/telco-systems/binox/PRVT-PORTS-AGGREGATION-MIB
new file mode 100644
index 0000000..090e026
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-PORTS-AGGREGATION-MIB
@@ -0,0 +1,614 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-PORTS-AGGREGATION-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-PORTS-AGGREGATION-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, 
+    OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtPortsAggregationMIB MODULE-IDENTITY
+    LAST-UPDATED "201402050000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The Ports Aggregation MIB module for
+         managing switch or ipSwitch static and
+         dynamic port aggregation."
+    REVISION    "201001070000Z"
+    DESCRIPTION 
+        "Initial"
+    ::= { switch 106 }
+
+
+PrvtPortsAggregationMacSecType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The state of a port with regards to MAC count."
+    SYNTAX      INTEGER { noViolation(1), watermarkReached(2), 
+                    maxMacCountReached(3), errorState(4) }
+
+prvtPortsAggregationNotifications OBJECT IDENTIFIER
+    ::= { prvtPortsAggregationMIB 0 }
+
+prvtPortsAggregationObjects OBJECT IDENTIFIER
+    ::= { prvtPortsAggregationMIB 1 }
+
+prvtPortsAggregationDistributionType OBJECT-TYPE
+    SYNTAX      INTEGER { l2(1), l3(2), l4(3), mpls(4) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The LACP distribution type.
+         l2 - MAC address based distribution
+         l3 - IP address based distribution
+         l4 - TCP/UDP IP address based distribution
+         mpls -MPLS label based distribution"
+    ::= { prvtPortsAggregationObjects 1 }
+
+portsAggregationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PortsAggregationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains the status of all the
+         trunks in the system. It can contain two
+         major types: static and dynamic trunks."
+    ::= { prvtPortsAggregationObjects 2 }
+
+portsAggregationEntry OBJECT-TYPE
+    SYNTAX      PortsAggregationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Ports aggregation entry."
+    INDEX       { portsAggregationName }
+    ::= { portsAggregationTable 1 }
+
+PortsAggregationEntry ::= SEQUENCE {
+    portsAggregationName                    OCTET STRING,
+    portsAggregationRowStatus               RowStatus,
+    portsAggregationDescription             OCTET STRING,
+    portsAggregationMode                    INTEGER,
+    portsAggregationLacpEnable              TruthValue,
+    portsAggregationLacpMode                INTEGER,
+    portsAggregationLacpAdminKey            Unsigned32,
+    portsAggregationLacpId                  MacAddress,
+    portsAggregationLacpMarker              TruthValue,
+    portsAggregationLacpSystemPriority      Unsigned32,
+    portsAggregationOperStatus              INTEGER,
+    portsAggregationPortCount               Unsigned32,
+    portsAggregationUplinkCount             Unsigned32,
+    portsAggregationIfInOctets              Counter64,
+    portsAggregationIfInUcastPkts           Counter64,
+    portsAggregationIfInNUcastPkts          Counter64,
+    portsAggregationIfInErrors              Counter64,
+    portsAggregationIfInUnknownProtos       Counter64,
+    portsAggregationIfOutOctets             Counter64,
+    portsAggregationIfOutUcastPkts          Counter64,
+    portsAggregationIfOutNUcastPkts         Counter64,
+    portsAggregationIfOutErrors             Counter64,
+    portsAggregationIfInMulticastPkts       Counter64,
+    portsAggregationIfInBroadcastPkts       Counter64,
+    portsAggregationIfInDiscardsPkts        Counter64,
+    portsAggregationIfOutMulticastPkts      Counter64,
+    portsAggregationIfOutBroadcastPkts      Counter64,
+    portsAggregationLacpFastRate            TruthValue,
+    portsAggregationLacpSelectionCriteria   INTEGER,
+    portsAggregationLacpTxOnStandby         TruthValue,
+    portsAggregationLacpForceActive         Unsigned32,
+    portsAggregationFailoverTime            OCTET STRING,
+    portsAggregationMacSecIfProfile         OCTET STRING,
+    portsAggregationMacSecIfCurrMacCount    Unsigned32,
+    portsAggregationMacSecIfState           PrvtPortsAggregationMacSecType,
+    portsAggregationEvPropProfile           OCTET STRING
+}
+
+portsAggregationName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..5))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation Name:
+         pattern ag(([1-9])|([1-9][0-9])|(1[0-9][0-9])|(2[0-5][0-6]))"
+    ::= { portsAggregationEntry 1 }
+
+portsAggregationRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation row status."
+    ::= { portsAggregationEntry 2 }
+
+portsAggregationDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation description."
+    ::= { portsAggregationEntry 3 }
+
+portsAggregationMode OBJECT-TYPE
+    SYNTAX      INTEGER { access(1), network(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation mode."
+    ::= { portsAggregationEntry 4 }
+
+portsAggregationLacpEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Link Aggregation Control Protocol (LACP) Configuration"
+    ::= { portsAggregationEntry 5 }
+
+portsAggregationLacpMode OBJECT-TYPE
+    SYNTAX      INTEGER { passive(1), active(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation lacp mode."
+    ::= { portsAggregationEntry 6 }
+
+portsAggregationLacpAdminKey OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation administrative key."
+    ::= { portsAggregationEntry 7 }
+
+portsAggregationLacpId OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify LACP ID (MAC address format)."
+    ::= { portsAggregationEntry 8 }
+
+portsAggregationLacpMarker OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation lacp marker."
+    ::= { portsAggregationEntry 9 }
+
+portsAggregationLacpSystemPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation lacp priority."
+    ::= { portsAggregationEntry 10 }
+
+portsAggregationOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation operational status."
+    ::= { portsAggregationEntry 11 }
+
+portsAggregationPortCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation ports count."
+    ::= { portsAggregationEntry 12 }
+
+portsAggregationUplinkCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation uplink ports count."
+    ::= { portsAggregationEntry 13 }
+
+portsAggregationIfInOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of octets received on the interface,
+         including framing characters."
+    ::= { portsAggregationEntry 14 }
+
+portsAggregationIfInUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of packets, delivered by this sub-layer to a
+         higher (sub-)layer, which were not addressed to a multicast
+         or broadcast address at this sub-layer."
+    ::= { portsAggregationEntry 15 }
+
+portsAggregationIfInNUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of packets, delivered by this sub-layer to a
+         higher (sub-)layer, which were addressed to a multicast or
+         broadcast address at this sub-layer."
+    ::= { portsAggregationEntry 16 }
+
+portsAggregationIfInErrors OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "For packet-oriented interfaces, the number of inbound
+         packets that contained errors preventing them from being
+         deliverable to a higher-layer protocol. For character-
+         oriented or fixed-length interfaces, the number of inbound
+         transmission units that contained errors preventing them
+         from being deliverable to a higher-layer protocol."
+    ::= { portsAggregationEntry 17 }
+
+portsAggregationIfInUnknownProtos OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "For packet-oriented interfaces, the number of packets
+         received via the interface which were discarded because of
+         an unknown or unsupported protocol. For character-oriented
+         or fixed-length interfaces that support protocol
+         multiplexing the number of transmission units received via
+         the interface which were discarded because of an unknown or
+         unsupported protocol. For any interface that does not
+         support protocol multiplexing, this counter will always be
+         0."
+    ::= { portsAggregationEntry 18 }
+
+portsAggregationIfOutOctets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of octets transmitted out of the
+         interface, including framing characters."
+    ::= { portsAggregationEntry 19 }
+
+portsAggregationIfOutUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets that higher-level protocols
+         requested be transmitted, and which were not addressed to a
+         multicast or broadcast address at this sub-layer, including
+         those that were discarded or not sent."
+    ::= { portsAggregationEntry 20 }
+
+portsAggregationIfOutNUcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets that higher-level protocols
+         requested be transmitted, and which were addressed to a
+         multicast or broadcast address at this sub-layer, including
+         those that were discarded or not sent."
+    ::= { portsAggregationEntry 21 }
+
+portsAggregationIfOutErrors OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "For packet-oriented interfaces, the number of outbound
+         packets that could not be transmitted because of errors.
+         For character-oriented or fixed-length interfaces, the
+         number of outbound transmission units that could not be
+         transmitted because of errors."
+    ::= { portsAggregationEntry 22 }
+
+portsAggregationIfInMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of packets, delivered by this sub-layer to a
+         higher (sub-)layer, which were addressed to a multicast
+         address at this sub-layer. For a MAC layer protocol, this
+         includes both Group and Functional addresses."
+    ::= { portsAggregationEntry 23 }
+
+portsAggregationIfInBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of packets, delivered by this sub-layer to a
+         higher (sub-)layer, which were addressed to a broadcast
+         address at this sub-layer."
+    ::= { portsAggregationEntry 24 }
+
+portsAggregationIfInDiscardsPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of inbound packets which were chosen to be
+         discarded even though no errors had been detected to prevent
+         
+         their being deliverable to a higher-layer protocol. One
+         possible reason for discarding such a packet could be to
+         free up buffer space."
+    ::= { portsAggregationEntry 25 }
+
+portsAggregationIfOutMulticastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets that higher-level protocols
+         requested be transmitted, and which were addressed to a
+         multicast address at this sub-layer, including those that
+         were discarded or not sent. For a MAC layer protocol, this
+         includes both Group and Functional addresses.
+         
+         Discontinuities in the value of this counter can occur at
+         re-initialization of the management system, and at other
+         times as indicated by the value of
+         ifCounterDiscontinuityTime."
+    ::= { portsAggregationEntry 26 }
+
+portsAggregationIfOutBroadcastPkts OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of packets that higher-level protocols
+         requested be transmitted, and which were addressed to a
+         broadcast address at this sub-layer, including those that
+         were discarded or not sent."
+    ::= { portsAggregationEntry 27 }
+
+portsAggregationLacpFastRate OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify LACP transmission interval."
+    ::= { portsAggregationEntry 28 }
+
+portsAggregationLacpSelectionCriteria OBJECT-TYPE
+    SYNTAX      INTEGER { highest-count(1), highest-weight(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify LACP active Sub-LAG selection criteria."
+    ::= { portsAggregationEntry 29 }
+
+portsAggregationLacpTxOnStandby OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable transmission of LACP PDUs on links selected as standby."
+    ::= { portsAggregationEntry 30 }
+
+portsAggregationLacpForceActive OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Force the active Sub-LAG."
+    ::= { portsAggregationEntry 31 }
+
+portsAggregationFailoverTime OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Time since last Sub-LAG failover."
+    ::= { portsAggregationEntry 32 }
+
+portsAggregationMacSecIfProfile OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..30))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The name of a learning profile from prvtMacSecLrnProfTable."
+    ::= { portsAggregationEntry 33 }
+
+portsAggregationMacSecIfCurrMacCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current MAC count for this entry."
+    ::= { portsAggregationEntry 34 }
+
+portsAggregationMacSecIfState OBJECT-TYPE
+    SYNTAX      PrvtPortsAggregationMacSecType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current state of this entry."
+    ::= { portsAggregationEntry 35 }
+
+portsAggregationEvPropProfile OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Event propagation profile name, aplied to this aggregation."
+    ::= { portsAggregationEntry 36 }
+
+portsAggregationPortsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PortsAggregationPortsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains ports in trunk."
+    ::= { prvtPortsAggregationObjects 3 }
+
+portsAggregationPortsEntry OBJECT-TYPE
+    SYNTAX      PortsAggregationPortsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Ports aggregation entry."
+    INDEX       { portsAggregationName, portsAggregationPortsIfIndex }
+    ::= { portsAggregationPortsTable 1 }
+
+PortsAggregationPortsEntry ::= SEQUENCE {
+    portsAggregationPortsIfIndex    InterfaceIndex,
+    portsAggregationPortsRowStatus  RowStatus,
+    portsAggregationPortsPriority   Unsigned32,
+    portsAggregationPortsSubLag     Unsigned32
+}
+
+portsAggregationPortsIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation port index."
+    ::= { portsAggregationPortsEntry 1 }
+
+portsAggregationPortsRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation ports row status."
+    ::= { portsAggregationPortsEntry 2 }
+
+portsAggregationPortsPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation port priority."
+    ::= { portsAggregationPortsEntry 3 }
+
+portsAggregationPortsSubLag OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..2)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Aggregation port Sub-LAG."
+    ::= { portsAggregationPortsEntry 4 }
+
+lagMemberLinkUp NOTIFICATION-TYPE
+    OBJECTS     { portsAggregationUplinkCount }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated
+         when a port in lag link becomes up."
+    ::= { prvtPortsAggregationNotifications 1 }
+
+lagMemberLinkDown NOTIFICATION-TYPE
+    OBJECTS     { portsAggregationUplinkCount }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated
+         when a port in lag link becomes down."
+    ::= { prvtPortsAggregationNotifications 2 }
+
+lagMemberAdd NOTIFICATION-TYPE
+    OBJECTS     { portsAggregationPortCount }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a new port is added to 
+         a lag link."
+    ::= { prvtPortsAggregationNotifications 3 }
+
+lagMemberRemove NOTIFICATION-TYPE
+    OBJECTS     { portsAggregationPortCount }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when a port is removed from 
+         a lag."
+    ::= { prvtPortsAggregationNotifications 4 }
+
+lagLinkUp NOTIFICATION-TYPE
+    OBJECTS     { portsAggregationOperStatus }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when lag link becomes
+         up."
+    ::= { prvtPortsAggregationNotifications 5 }
+
+lagLinkDown NOTIFICATION-TYPE
+    OBJECTS     { portsAggregationOperStatus }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is generated when lag link becomes
+         down."
+    ::= { prvtPortsAggregationNotifications 6 }
+
+portsAggregationWmarkViolation NOTIFICATION-TYPE
+    OBJECTS     { portsAggregationName }
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtPortsAggregationNotifications 7 }
+
+portsAggregationViolation NOTIFICATION-TYPE
+    OBJECTS     { portsAggregationName }
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtPortsAggregationNotifications 8 }
+
+END -- end of module PRVT-PORTS-AGGREGATION-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-PROTO-PRIORITY-MIB b/MIBS/telco-systems/binox/PRVT-PROTO-PRIORITY-MIB
new file mode 100644
index 0000000..366a7f1
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-PROTO-PRIORITY-MIB
@@ -0,0 +1,129 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-PROTO-PRIORITY-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-PROTO-PRIORITY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus
+        FROM SNMPv2-TC;
+
+prvtProtoPriorityMIB MODULE-IDENTITY
+    LAST-UPDATED "201402030000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This document is the SNMP MIB module to manage dscp remarking."
+    REVISION    "201402030000Z"
+    DESCRIPTION 
+        "Initial implementation"
+    ::= { switch 182 }
+
+
+prvtProtoPriorityMIBObjects OBJECT IDENTIFIER
+    ::= { prvtProtoPriorityMIB 1 }
+
+dscpRemarkingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF DscpRemarkingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains dscpRemarking information."
+    ::= { prvtProtoPriorityMIBObjects 1 }
+
+dscpRemarkingEntry OBJECT-TYPE
+    SYNTAX      DscpRemarkingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific dscpRemarking."
+    INDEX       { dscpRemarkingValue }
+    ::= { dscpRemarkingTable 1 }
+
+DscpRemarkingEntry ::= SEQUENCE {
+    dscpRemarkingValue      Unsigned32,
+    dscpRemarkingRowStatus  RowStatus,
+    dscpRemarkingFc         INTEGER
+}
+
+dscpRemarkingValue OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..63)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Specify DSCP value to be remarked."
+    ::= { dscpRemarkingEntry 1 }
+
+dscpRemarkingRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object indicates the status of this row."
+    ::= { dscpRemarkingEntry 2 }
+
+dscpRemarkingFc OBJECT-TYPE
+    SYNTAX      INTEGER { be(1), l2(2), af(3), l1(4), h2(5), ef(6), 
+                    h1(7), nc(8) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Forwarding class."
+    ::= { dscpRemarkingEntry 3 }
+
+prvtArpPriorityMappingToFc OBJECT-TYPE
+    SYNTAX      INTEGER { be(1), l2(2), af(3), l1(4), h2(5), ef(6), 
+                    h1(7), nc(8) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify ARP packets mapping
+         to forwarding class"
+    ::= { prvtProtoPriorityMIBObjects 2 }
+
+END -- end of module PRVT-PROTO-PRIORITY-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-QOS-MIB b/MIBS/telco-systems/binox/PRVT-QOS-MIB
new file mode 100644
index 0000000..b0ddfe3
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-QOS-MIB
@@ -0,0 +1,1906 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-QOS-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-QOS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    serviceAccessSwitch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtQosMIB MODULE-IDENTITY
+    LAST-UPDATED "201401160000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The SNMP MIB module to manage the QoS parameters."
+    REVISION    "201401160000Z"
+    DESCRIPTION 
+        "added prvtQosSchedProfileDescription,
+         prvtQosMapProfExpToFcTable,prvtQosMapProfAnyExpToFcValue,
+         prvtQosMapProfAnyVptToFcColor,prvtQosRemarkProfFcToExpTable"
+    REVISION    "201401150000Z"
+    DESCRIPTION 
+        "added prvtQosWredProfTable,prvtQosPortEgrPolWredProf,
+         prvtQosPortEgrPolQueWredProf"
+    REVISION    "201312110000Z"
+    DESCRIPTION 
+        "added trustInnerPriority."
+    REVISION    "201003080000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { serviceAccessSwitch 1 }
+
+
+PrvtQosEncapType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "VLAN encapsulation value."
+    SYNTAX      Integer32 (0..4096)
+
+PrvtQosServShaperProfileIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The value of a service shaper profile identifier."
+    SYNTAX      Integer32 (1..48)
+
+PrvtQosProfileIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The value of a profile identifier."
+    SYNTAX      Integer32 (1..8)
+
+PrvtQosFcType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The name of a Forwarding Class."
+    SYNTAX      INTEGER { be(1), l2(2), af(3), l1(4), h2(5), ef(6), 
+                    h1(7), nc(8) }
+
+PrvtQosDscpType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A Differential Services Code Point value."
+    SYNTAX      Integer32 (0..63)
+
+PrvtQosVptType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "VLAN priority"
+    SYNTAX      Integer32 (0..7)
+
+PrvtQosExpType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Exp"
+    SYNTAX      Unsigned32 (0..7)
+
+PrvtQosDescrType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "150a"
+    STATUS      current
+    DESCRIPTION 
+        "Description for an item."
+    SYNTAX      OCTET STRING (SIZE(1..150))
+
+PrvtQosQueueIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identification number of a queue."
+    SYNTAX      Integer32 (1..8)
+
+PrvtQosServiceIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The identification number of a service."
+    SYNTAX      Unsigned32 (1..4294967294)
+
+PrvtQosPolicyNameType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "32a"
+    STATUS      current
+    DESCRIPTION 
+        "The name of a policy."
+    SYNTAX      OCTET STRING (SIZE(1..32))
+
+PrvtQosPolicyNameOrNoneType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "32a"
+    STATUS      current
+    DESCRIPTION 
+        "Same as PrvtQosPolicyNameType except that a zero length string
+         indicates that no policy has been assigned."
+    SYNTAX      OCTET STRING (SIZE(0..32))
+
+PrvtQosColorType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Traffic QOS colors."
+    SYNTAX      INTEGER { green(1), yellow(2) }
+
+PrvtQosSchedType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Scheduling profile type."
+    SYNTAX      INTEGER { sp(1), wrr(2), hybrid1(3), hybrid2(4), 
+                    hybrid3(5), hybrid4(6), hybrid5(7), hybrid6(8), 
+                    hybrid7(9), drr(10), mdrr1(11), mdrr2(12), mdrr3(13), 
+                    mdrr4(14), mdrr5(15), mdrr6(16), mdrr7(17) }
+
+PrvtQosTrustType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Trust mode values."
+    SYNTAX      INTEGER { untrust(0), trustPriority(1), 
+                    trustPreservePriority(2), trustDscp(3), 
+                    trustPriorityAndDscp(4), trustInnerPriority(5) }
+
+PrvtQosQueueWeight ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The weight to assign to a queue."
+    SYNTAX      Integer32 (0..127)
+
+prvtQosMIBObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIB 1 }
+
+prvtQosSchedProfObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 1 }
+
+prvtQosSchedProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosSchedProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Scheduling profile table.
+         Each entry in this table defines a scheduling profile that may be assigned
+         to a QOS policy."
+    ::= { prvtQosSchedProfObjects 1 }
+
+prvtQosSchedProfileEntry OBJECT-TYPE
+    SYNTAX      PrvtQosSchedProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosSchedProfileTable."
+    INDEX       { prvtQosSchedProfileId }
+    ::= { prvtQosSchedProfileTable 1 }
+
+PrvtQosSchedProfileEntry ::= SEQUENCE {
+    prvtQosSchedProfileId               PrvtQosProfileIdType,
+    prvtQosSchedProfileRowStatus        RowStatus,
+    prvtQosSchedProfileType             PrvtQosSchedType,
+    prvtQosSchedProfileQueue1Weight     PrvtQosQueueWeight,
+    prvtQosSchedProfileQueue2Weight     PrvtQosQueueWeight,
+    prvtQosSchedProfileQueue3Weight     PrvtQosQueueWeight,
+    prvtQosSchedProfileQueue4Weight     PrvtQosQueueWeight,
+    prvtQosSchedProfileQueue5Weight     PrvtQosQueueWeight,
+    prvtQosSchedProfileQueue6Weight     PrvtQosQueueWeight,
+    prvtQosSchedProfileQueue7Weight     PrvtQosQueueWeight,
+    prvtQosSchedProfileQueue8Weight     PrvtQosQueueWeight,
+    prvtQosSchedProfileDescription      PrvtQosDescrType
+}
+
+prvtQosSchedProfileId OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a scheduling profile."
+    ::= { prvtQosSchedProfileEntry 1 }
+
+prvtQosSchedProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosSchedProfileEntry 2 }
+
+prvtQosSchedProfileType OBJECT-TYPE
+    SYNTAX      PrvtQosSchedType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Scheduling profile type."
+    ::= { prvtQosSchedProfileEntry 3 }
+
+prvtQosSchedProfileQueue1Weight OBJECT-TYPE
+    SYNTAX      PrvtQosQueueWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The weight assigned to queue 1."
+    ::= { prvtQosSchedProfileEntry 4 }
+
+prvtQosSchedProfileQueue2Weight OBJECT-TYPE
+    SYNTAX      PrvtQosQueueWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The weight assigned to queue 2."
+    ::= { prvtQosSchedProfileEntry 5 }
+
+prvtQosSchedProfileQueue3Weight OBJECT-TYPE
+    SYNTAX      PrvtQosQueueWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The weight assigned to queue 3."
+    ::= { prvtQosSchedProfileEntry 6 }
+
+prvtQosSchedProfileQueue4Weight OBJECT-TYPE
+    SYNTAX      PrvtQosQueueWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The weight assigned to queue 4."
+    ::= { prvtQosSchedProfileEntry 7 }
+
+prvtQosSchedProfileQueue5Weight OBJECT-TYPE
+    SYNTAX      PrvtQosQueueWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The weight assigned to queue 5."
+    ::= { prvtQosSchedProfileEntry 8 }
+
+prvtQosSchedProfileQueue6Weight OBJECT-TYPE
+    SYNTAX      PrvtQosQueueWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The weight assigned to queue 6."
+    ::= { prvtQosSchedProfileEntry 9 }
+
+prvtQosSchedProfileQueue7Weight OBJECT-TYPE
+    SYNTAX      PrvtQosQueueWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The weight assigned to queue 7."
+    ::= { prvtQosSchedProfileEntry 10 }
+
+prvtQosSchedProfileQueue8Weight OBJECT-TYPE
+    SYNTAX      PrvtQosQueueWeight
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The weight assigned to queue 8."
+    ::= { prvtQosSchedProfileEntry 11 }
+
+prvtQosSchedProfileDescription OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Description of the policy"
+    ::= { prvtQosSchedProfileEntry 12 }
+
+prvtQosShaperProfObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 2 }
+
+prvtQosPortShaperProfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosPortShaperProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Port Shaper Profile Table
+         Each entry in this table defines a set of shaping parameters that may be enforced
+         on a port."
+    ::= { prvtQosShaperProfObjects 1 }
+
+prvtQosPortShaperProfEntry OBJECT-TYPE
+    SYNTAX      PrvtQosPortShaperProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosPortShaperProfTable."
+    INDEX       { prvtQosPortShaperProfId }
+    ::= { prvtQosPortShaperProfTable 1 }
+
+PrvtQosPortShaperProfEntry ::= SEQUENCE {
+    prvtQosPortShaperProfId         PrvtQosProfileIdType,
+    prvtQosPortShaperProfRowStatus  RowStatus,
+    prvtQosPortShaperProfDescr      PrvtQosDescrType,
+    prvtQosPortShaperProfCIR        Unsigned32,
+    prvtQosPortShaperProfCBS        Unsigned32
+}
+
+prvtQosPortShaperProfId OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a port shaper profile."
+    ::= { prvtQosPortShaperProfEntry 1 }
+
+prvtQosPortShaperProfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosPortShaperProfEntry 2 }
+
+prvtQosPortShaperProfDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the profile."
+    ::= { prvtQosPortShaperProfEntry 3 }
+
+prvtQosPortShaperProfCIR OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Commited Information Rate in kbps."
+    ::= { prvtQosPortShaperProfEntry 4 }
+
+prvtQosPortShaperProfCBS OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Commited Burst Size allowed in kilobytes."
+    ::= { prvtQosPortShaperProfEntry 5 }
+
+prvtQosServShaperProfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosServShaperProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Shaper Profile Table
+         Each entry in this table defines a set of shaping parameters that may be enforced
+         on a service."
+    ::= { prvtQosShaperProfObjects 2 }
+
+prvtQosServShaperProfEntry OBJECT-TYPE
+    SYNTAX      PrvtQosServShaperProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosServShaperProfTable."
+    INDEX       { prvtQosServShaperProfId }
+    ::= { prvtQosServShaperProfTable 1 }
+
+PrvtQosServShaperProfEntry ::= SEQUENCE {
+    prvtQosServShaperProfId         PrvtQosServShaperProfileIdType,
+    prvtQosServShaperProfRowStatus  RowStatus,
+    prvtQosServShaperProfDescr      PrvtQosDescrType,
+    prvtQosServShaperProfCIR        Unsigned32,
+    prvtQosServShaperProfCBS        Unsigned32
+}
+
+prvtQosServShaperProfId OBJECT-TYPE
+    SYNTAX      PrvtQosServShaperProfileIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a service shaper profile."
+    ::= { prvtQosServShaperProfEntry 1 }
+
+prvtQosServShaperProfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosServShaperProfEntry 2 }
+
+prvtQosServShaperProfDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the profile."
+    ::= { prvtQosServShaperProfEntry 3 }
+
+prvtQosServShaperProfCIR OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Commited Information Rate in kbps."
+    ::= { prvtQosServShaperProfEntry 4 }
+
+prvtQosServShaperProfCBS OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Commited Burst Size allowed in kilobytes."
+    ::= { prvtQosServShaperProfEntry 5 }
+
+prvtQosCongAvoidProfObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 3 }
+
+prvtQosTailDropProfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosTailDropProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Tail Drop Profile Table
+         Each entry in this table defines a set of tail-drop parameters that may be enforced
+         on a queue or a policy."
+    ::= { prvtQosCongAvoidProfObjects 1 }
+
+prvtQosTailDropProfEntry OBJECT-TYPE
+    SYNTAX      PrvtQosTailDropProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosTailDropProfTable."
+    INDEX       { prvtQosTailDropProfId }
+    ::= { prvtQosTailDropProfTable 1 }
+
+PrvtQosTailDropProfEntry ::= SEQUENCE {
+    prvtQosTailDropProfId               PrvtQosProfileIdType,
+    prvtQosTailDropProfRowStatus        RowStatus,
+    prvtQosTailDropProfDescr            PrvtQosDescrType,
+    prvtQosTailDropProfYellowThresh     Unsigned32,
+    prvtQosTailDropProfRedThresh        Unsigned32
+}
+
+prvtQosTailDropProfId OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a tail drop profile."
+    ::= { prvtQosTailDropProfEntry 1 }
+
+prvtQosTailDropProfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosTailDropProfEntry 2 }
+
+prvtQosTailDropProfDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the profile."
+    ::= { prvtQosTailDropProfEntry 3 }
+
+prvtQosTailDropProfYellowThresh OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Drop start threshold for the yellow traffic in kilobytes."
+    ::= { prvtQosTailDropProfEntry 4 }
+
+prvtQosTailDropProfRedThresh OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Drop start threshold for the red traffic in kilobytes."
+    ::= { prvtQosTailDropProfEntry 5 }
+
+prvtQosSredProfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosSredProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SRED Profile Table
+         Each entry in this table defines a set of SRED parameters that may be enforced
+         on a queue or a policy."
+    ::= { prvtQosCongAvoidProfObjects 2 }
+
+prvtQosSredProfEntry OBJECT-TYPE
+    SYNTAX      PrvtQosSredProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosSredProfTable."
+    INDEX       { prvtQosSredProfId }
+    ::= { prvtQosSredProfTable 1 }
+
+PrvtQosSredProfEntry ::= SEQUENCE {
+    prvtQosSredProfId                   PrvtQosProfileIdType,
+    prvtQosSredProfRowStatus            RowStatus,
+    prvtQosSredProfDescr                PrvtQosDescrType,
+    prvtQosSredProfYellowThreshold      Unsigned32,
+    prvtQosSredProfYellowProbability    Unsigned32,
+    prvtQosSredProfRedThreshold         Unsigned32,
+    prvtQosSredProfRedProbability       Unsigned32
+}
+
+prvtQosSredProfId OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a SRED profile."
+    ::= { prvtQosSredProfEntry 1 }
+
+prvtQosSredProfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosSredProfEntry 2 }
+
+prvtQosSredProfDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the profile."
+    ::= { prvtQosSredProfEntry 3 }
+
+prvtQosSredProfYellowThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "SRED yellow treshold in per-cent."
+    ::= { prvtQosSredProfEntry 4 }
+
+prvtQosSredProfYellowProbability OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..90)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "SRED yellow probability in per-cent."
+    ::= { prvtQosSredProfEntry 5 }
+
+prvtQosSredProfRedThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "SRED Red treshold in per-cent."
+    ::= { prvtQosSredProfEntry 6 }
+
+prvtQosSredProfRedProbability OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..90)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "SRED Red probability in per-cent."
+    ::= { prvtQosSredProfEntry 7 }
+
+prvtQosWredProfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosWredProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "WRED Profile Table
+         Each entry in this table defines a set of WRED parameters that may be enforced
+         on a queue or a policy."
+    ::= { prvtQosCongAvoidProfObjects 3 }
+
+prvtQosWredProfEntry OBJECT-TYPE
+    SYNTAX      PrvtQosWredProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosWredProfTable."
+    INDEX       { prvtQosWredProfId }
+    ::= { prvtQosWredProfTable 1 }
+
+PrvtQosWredProfEntry ::= SEQUENCE {
+    prvtQosWredProfId                   PrvtQosProfileIdType,
+    prvtQosWredProfRowStatus            RowStatus,
+    prvtQosWredProfDescr                PrvtQosDescrType,
+    prvtQosWredProfYellowThreshold      Unsigned32,
+    prvtQosWredProfYellowProbability    Unsigned32,
+    prvtQosWredProfRedThreshold         Unsigned32,
+    prvtQosWredProfRedProbability       Unsigned32
+}
+
+prvtQosWredProfId OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a WRED profile."
+    ::= { prvtQosWredProfEntry 1 }
+
+prvtQosWredProfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosWredProfEntry 2 }
+
+prvtQosWredProfDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the profile."
+    ::= { prvtQosWredProfEntry 3 }
+
+prvtQosWredProfYellowThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "WRED yellow treshold in per-cent."
+    ::= { prvtQosWredProfEntry 4 }
+
+prvtQosWredProfYellowProbability OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..90)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "WRED yellow probability in per-cent."
+    ::= { prvtQosWredProfEntry 5 }
+
+prvtQosWredProfRedThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "WRED Red treshold in per-cent."
+    ::= { prvtQosWredProfEntry 6 }
+
+prvtQosWredProfRedProbability OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..90)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "WRED Red probability in per-cent."
+    ::= { prvtQosWredProfEntry 7 }
+
+prvtQosMapProfObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 4 }
+
+prvtQosMapProfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosMapProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Mapping Profile Table
+         Each entry in this table defines a mapping profile that may be assigned to
+         a QOS policy."
+    ::= { prvtQosMapProfObjects 1 }
+
+prvtQosMapProfEntry OBJECT-TYPE
+    SYNTAX      PrvtQosMapProfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosMapProfTable."
+    INDEX       { prvtQosMapProfName }
+    ::= { prvtQosMapProfTable 1 }
+
+PrvtQosMapProfEntry ::= SEQUENCE {
+    prvtQosMapProfName              PrvtQosPolicyNameType,
+    prvtQosMapProfRowStatus         RowStatus,
+    prvtQosMapProfDescr             PrvtQosDescrType,
+    prvtQosMapProfAnyVptToFcValue   PrvtQosFcType,
+    prvtQosMapProfAnyVptToFcColor   PrvtQosColorType,
+    prvtQosMapProfAnyDscpToFcValue  PrvtQosFcType,
+    prvtQosMapProfAnyDscpToFcColor  PrvtQosColorType,
+    prvtQosMapProfAnyExpToFcValue   PrvtQosFcType,
+    prvtQosMapProfAnyExpToFcColor   PrvtQosColorType
+}
+
+prvtQosMapProfName OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a mapping profile."
+    ::= { prvtQosMapProfEntry 1 }
+
+prvtQosMapProfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosMapProfEntry 2 }
+
+prvtQosMapProfDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the profile."
+    ::= { prvtQosMapProfEntry 3 }
+
+prvtQosMapProfAnyVptToFcValue OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to be assigned to matching traffic."
+    ::= { prvtQosMapProfEntry 4 }
+
+prvtQosMapProfAnyVptToFcColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to be assigned to matching traffic."
+    ::= { prvtQosMapProfEntry 5 }
+
+prvtQosMapProfAnyDscpToFcValue OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to be assigned to matching traffic."
+    ::= { prvtQosMapProfEntry 6 }
+
+prvtQosMapProfAnyDscpToFcColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to be assigned to matching traffic."
+    ::= { prvtQosMapProfEntry 7 }
+
+prvtQosMapProfAnyExpToFcValue OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to be assigned to untrusted ingress traffic."
+    ::= { prvtQosMapProfEntry 8 }
+
+prvtQosMapProfAnyExpToFcColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to be assigned to all untrusted ingress traffic."
+    ::= { prvtQosMapProfEntry 9 }
+
+prvtQosMapProfVptToFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosMapProfVptToFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Mapping Profile VPT-to-FC Table
+         Each entry in this table defines how a mapping profile maps a specific VLAN priority to
+         a forwarding class "
+    ::= { prvtQosMapProfObjects 2 }
+
+prvtQosMapProfVptToFcEntry OBJECT-TYPE
+    SYNTAX      PrvtQosMapProfVptToFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosMapProfVptToFcTable."
+    INDEX       { prvtQosMapProfName, prvtQosMapProfVptToFcId }
+    ::= { prvtQosMapProfVptToFcTable 1 }
+
+PrvtQosMapProfVptToFcEntry ::= SEQUENCE {
+    prvtQosMapProfVptToFcId         PrvtQosVptType,
+    prvtQosMapProfVptToFcRowStatus  RowStatus,
+    prvtQosMapProfVptToFcValue      PrvtQosFcType,
+    prvtQosMapProfVptToFcColor      PrvtQosColorType
+}
+
+prvtQosMapProfVptToFcId OBJECT-TYPE
+    SYNTAX      PrvtQosVptType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Vlan priority to which this row applies."
+    ::= { prvtQosMapProfVptToFcEntry 1 }
+
+prvtQosMapProfVptToFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile's VLAN priority."
+    ::= { prvtQosMapProfVptToFcEntry 2 }
+
+prvtQosMapProfVptToFcValue OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to be assigned to traffic matching this profile's VLAN priority."
+    ::= { prvtQosMapProfVptToFcEntry 3 }
+
+prvtQosMapProfVptToFcColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to be assigned to traffic matching this profile's VLAN priority."
+    ::= { prvtQosMapProfVptToFcEntry 4 }
+
+prvtQosMapProfDscpToFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosMapProfDscpToFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Mapping Profile DSCP-to-FC Table
+         Each entry in this table defines how a mapping profile maps a specific DiffServ Code Point
+         value to a forwarding class."
+    ::= { prvtQosMapProfObjects 3 }
+
+prvtQosMapProfDscpToFcEntry OBJECT-TYPE
+    SYNTAX      PrvtQosMapProfDscpToFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosMapProfDscpToFcTable."
+    INDEX       { prvtQosMapProfName, prvtQosMapProfDscpToFcId }
+    ::= { prvtQosMapProfDscpToFcTable 1 }
+
+PrvtQosMapProfDscpToFcEntry ::= SEQUENCE {
+    prvtQosMapProfDscpToFcId            PrvtQosDscpType,
+    prvtQosMapProfDscpToFcRowStatus     RowStatus,
+    prvtQosMapProfDscpToFcValue         PrvtQosFcType,
+    prvtQosMapProfDscpToFcColor         PrvtQosColorType
+}
+
+prvtQosMapProfDscpToFcId OBJECT-TYPE
+    SYNTAX      PrvtQosDscpType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The DiffServ Code Point value to which this row applies."
+    ::= { prvtQosMapProfDscpToFcEntry 1 }
+
+prvtQosMapProfDscpToFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile's DSCP value."
+    ::= { prvtQosMapProfDscpToFcEntry 2 }
+
+prvtQosMapProfDscpToFcValue OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to be assigned to traffic matching this profile's DSCP value."
+    ::= { prvtQosMapProfDscpToFcEntry 3 }
+
+prvtQosMapProfDscpToFcColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to be assigned to traffic matching this profile's DSCP value."
+    ::= { prvtQosMapProfDscpToFcEntry 4 }
+
+prvtQosMapProfExpToFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosMapProfExpToFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Mapping Profile EXP-to-FC Table
+         Each entry in this table defines how a mapping profile maps a specific exp to
+         a forwarding class "
+    ::= { prvtQosMapProfObjects 4 }
+
+prvtQosMapProfExpToFcEntry OBJECT-TYPE
+    SYNTAX      PrvtQosMapProfExpToFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosMapProfExpToFcTable."
+    INDEX       { prvtQosMapProfName, prvtQosMapProfExpToFcId }
+    ::= { prvtQosMapProfExpToFcTable 1 }
+
+PrvtQosMapProfExpToFcEntry ::= SEQUENCE {
+    prvtQosMapProfExpToFcId         PrvtQosExpType,
+    prvtQosMapProfExpToFcRowStatus  RowStatus,
+    prvtQosMapProfExpToFcValue      PrvtQosFcType,
+    prvtQosMapProfExpToFcColor      PrvtQosColorType
+}
+
+prvtQosMapProfExpToFcId OBJECT-TYPE
+    SYNTAX      PrvtQosExpType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Vlan priority to which this row applies."
+    ::= { prvtQosMapProfExpToFcEntry 1 }
+
+prvtQosMapProfExpToFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile's VLAN priority."
+    ::= { prvtQosMapProfExpToFcEntry 2 }
+
+prvtQosMapProfExpToFcValue OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to be assigned to traffic matching this profile's VLAN priority."
+    ::= { prvtQosMapProfExpToFcEntry 3 }
+
+prvtQosMapProfExpToFcColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to be assigned to traffic matching this profile's VLAN priority."
+    ::= { prvtQosMapProfExpToFcEntry 4 }
+
+prvtQosRemarkProfObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 5 }
+
+prvtQosRemarkProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosRemarkProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Remarking Profile Table
+         Each entry in this table defines a remarking profile."
+    ::= { prvtQosRemarkProfObjects 1 }
+
+prvtQosRemarkProfileEntry OBJECT-TYPE
+    SYNTAX      PrvtQosRemarkProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosRemarkProfileTable."
+    INDEX       { prvtQosRemarkProfileName }
+    ::= { prvtQosRemarkProfileTable 1 }
+
+PrvtQosRemarkProfileEntry ::= SEQUENCE {
+    prvtQosRemarkProfileName        PrvtQosPolicyNameType,
+    prvtQosRemarkProfileRowStatus   RowStatus,
+    prvtQosRemarkProfileDescr       PrvtQosDescrType
+}
+
+prvtQosRemarkProfileName OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a remarking profile."
+    ::= { prvtQosRemarkProfileEntry 1 }
+
+prvtQosRemarkProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosRemarkProfileEntry 2 }
+
+prvtQosRemarkProfileDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the profile."
+    ::= { prvtQosRemarkProfileEntry 3 }
+
+prvtQosRemarkProfFcToVptTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosRemarkProfFcToVptEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Remarking Profile FC-to-VPT Table
+         Each entry in this table defines how a remarking profile maps a specific forwarding
+         class to VLAN priority value."
+    ::= { prvtQosRemarkProfObjects 2 }
+
+prvtQosRemarkProfFcToVptEntry OBJECT-TYPE
+    SYNTAX      PrvtQosRemarkProfFcToVptEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosRemarkProfFcToVptTable."
+    INDEX       { prvtQosRemarkProfileName, prvtQosRemarkProfFcToVptId, 
+                  prvtQosRemarkProfFcToVptColor }
+    ::= { prvtQosRemarkProfFcToVptTable 1 }
+
+PrvtQosRemarkProfFcToVptEntry ::= SEQUENCE {
+    prvtQosRemarkProfFcToVptId      PrvtQosFcType,
+    prvtQosRemarkProfFcToVptColor   PrvtQosColorType,
+    prvtQosRemarkProfFcToVptRS      RowStatus,
+    prvtQosRemarkProfFcToVptValue   PrvtQosVptType
+}
+
+prvtQosRemarkProfFcToVptId OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to which this row applies."
+    ::= { prvtQosRemarkProfFcToVptEntry 1 }
+
+prvtQosRemarkProfFcToVptColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The color to which this row applies."
+    ::= { prvtQosRemarkProfFcToVptEntry 2 }
+
+prvtQosRemarkProfFcToVptRS OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile's forwarding class."
+    ::= { prvtQosRemarkProfFcToVptEntry 3 }
+
+prvtQosRemarkProfFcToVptValue OBJECT-TYPE
+    SYNTAX      PrvtQosVptType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN priority value to be assigned to traffic matching this profile's forwarding class."
+    ::= { prvtQosRemarkProfFcToVptEntry 4 }
+
+prvtQosRemarkProfFcToDscpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosRemarkProfFcToDscpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Remarking Profile FC-to-DSCP Table
+         Each entry in this table defines how a remarking profile maps a specific forwarding
+         class to DiffServ Code Point value."
+    ::= { prvtQosRemarkProfObjects 3 }
+
+prvtQosRemarkProfFcToDscpEntry OBJECT-TYPE
+    SYNTAX      PrvtQosRemarkProfFcToDscpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosRemarkProfFcToDscpTable."
+    INDEX       { prvtQosRemarkProfileName, prvtQosRemarkProfFcToDscpId, 
+                  prvtQosRemarkProfFcToDscpColor }
+    ::= { prvtQosRemarkProfFcToDscpTable 1 }
+
+PrvtQosRemarkProfFcToDscpEntry ::= SEQUENCE {
+    prvtQosRemarkProfFcToDscpId     PrvtQosFcType,
+    prvtQosRemarkProfFcToDscpColor  PrvtQosColorType,
+    prvtQosRemarkProfFcToDscpRS     RowStatus,
+    prvtQosRemarkProfFcToDscpValue  PrvtQosDscpType
+}
+
+prvtQosRemarkProfFcToDscpId OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to which this row applies."
+    ::= { prvtQosRemarkProfFcToDscpEntry 1 }
+
+prvtQosRemarkProfFcToDscpColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The color to which this row applies."
+    ::= { prvtQosRemarkProfFcToDscpEntry 2 }
+
+prvtQosRemarkProfFcToDscpRS OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile's forwarding class."
+    ::= { prvtQosRemarkProfFcToDscpEntry 3 }
+
+prvtQosRemarkProfFcToDscpValue OBJECT-TYPE
+    SYNTAX      PrvtQosDscpType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The DiffServ Code Point value to be assigned to traffic matching this profile's forwarding class."
+    ::= { prvtQosRemarkProfFcToDscpEntry 4 }
+
+prvtQosRemarkProfFcToExpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosRemarkProfFcToExpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Remarking Profile FC-to-EXP Table
+         Each entry in this table defines how a remarking profile maps a specific forwarding
+         class to EXP."
+    ::= { prvtQosRemarkProfObjects 4 }
+
+prvtQosRemarkProfFcToExpEntry OBJECT-TYPE
+    SYNTAX      PrvtQosRemarkProfFcToExpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosRemarkProfFcToExpTable."
+    INDEX       { prvtQosRemarkProfileName, prvtQosRemarkProfFcToExpId, 
+                  prvtQosRemarkProfFcToExpColor }
+    ::= { prvtQosRemarkProfFcToExpTable 1 }
+
+PrvtQosRemarkProfFcToExpEntry ::= SEQUENCE {
+    prvtQosRemarkProfFcToExpId      PrvtQosFcType,
+    prvtQosRemarkProfFcToExpColor   PrvtQosColorType,
+    prvtQosRemarkProfFcToExpRS      RowStatus,
+    prvtQosRemarkProfFcToExpValue   PrvtQosExpType
+}
+
+prvtQosRemarkProfFcToExpId OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to which this row applies."
+    ::= { prvtQosRemarkProfFcToExpEntry 1 }
+
+prvtQosRemarkProfFcToExpColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The color to which this row applies."
+    ::= { prvtQosRemarkProfFcToExpEntry 2 }
+
+prvtQosRemarkProfFcToExpRS OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile's forwarding class."
+    ::= { prvtQosRemarkProfFcToExpEntry 3 }
+
+prvtQosRemarkProfFcToExpValue OBJECT-TYPE
+    SYNTAX      PrvtQosExpType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN priority value to be assigned to traffic matching this profile's forwarding class."
+    ::= { prvtQosRemarkProfFcToExpEntry 4 }
+
+prvtQosServPolObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 6 }
+
+prvtQosSvcIngPolTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosSvcIngPolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy Table
+         Each entry in this table defines an ingress policy which may be assigned
+         to a service."
+    ::= { prvtQosServPolObjects 1 }
+
+prvtQosSvcIngPolEntry OBJECT-TYPE
+    SYNTAX      PrvtQosSvcIngPolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosSvcIngPolTable."
+    INDEX       { prvtQosSvcIngPolName }
+    ::= { prvtQosSvcIngPolTable 1 }
+
+PrvtQosSvcIngPolEntry ::= SEQUENCE {
+    prvtQosSvcIngPolName                PrvtQosPolicyNameType,
+    prvtQosSvcIngPolRowStatus           RowStatus,
+    prvtQosSvcIngPolDescr               PrvtQosDescrType,
+    prvtQosSvcIngPolShaperProfile       PrvtQosServShaperProfileIdType,
+    prvtQosSvcIngPolSchedProfile        PrvtQosProfileIdType,
+    prvtQosSvcIngPolTailDropProfile     PrvtQosProfileIdType
+}
+
+prvtQosSvcIngPolName OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Ingress service policy name."
+    ::= { prvtQosSvcIngPolEntry 1 }
+
+prvtQosSvcIngPolRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this policy."
+    ::= { prvtQosSvcIngPolEntry 2 }
+
+prvtQosSvcIngPolDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the policy."
+    ::= { prvtQosSvcIngPolEntry 3 }
+
+prvtQosSvcIngPolShaperProfile OBJECT-TYPE
+    SYNTAX      PrvtQosServShaperProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaper profile used by this policy.
+         Sets to this object will fail if the specified shaper profile does not already exist."
+    ::= { prvtQosSvcIngPolEntry 4 }
+
+prvtQosSvcIngPolSchedProfile OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The scheduling profile used by this policy.
+         Sets to this object will fail if the specified scheduling profile does not already exist."
+    ::= { prvtQosSvcIngPolEntry 5 }
+
+prvtQosSvcIngPolTailDropProfile OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The tail drop profile used by this policy.
+         Sets to this object will fail if the specified tail drop profile does not already exist."
+    ::= { prvtQosSvcIngPolEntry 6 }
+
+prvtQosSvcIngPolQueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosSvcIngPolQueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Ingress Policy Queue Table
+         Each entry in this table defines the characteristics of a queue belonging to a
+         service ingress policy."
+    ::= { prvtQosServPolObjects 2 }
+
+prvtQosSvcIngPolQueEntry OBJECT-TYPE
+    SYNTAX      PrvtQosSvcIngPolQueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosSvcIngPolQueTable."
+    INDEX       { prvtQosSvcIngPolName, prvtQosSvcIngPolQueId }
+    ::= { prvtQosSvcIngPolQueTable 1 }
+
+PrvtQosSvcIngPolQueEntry ::= SEQUENCE {
+    prvtQosSvcIngPolQueId               PrvtQosQueueIdType,
+    prvtQosSvcIngPolQueRowStatus        RowStatus,
+    prvtQosSvcIngPolQueShaperProf       PrvtQosServShaperProfileIdType,
+    prvtQosSvcIngPolQueTailDropProf     PrvtQosProfileIdType
+}
+
+prvtQosSvcIngPolQueId OBJECT-TYPE
+    SYNTAX      PrvtQosQueueIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The queue ID to which this row applies."
+    ::= { prvtQosSvcIngPolQueEntry 1 }
+
+prvtQosSvcIngPolQueRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this policy's queue."
+    ::= { prvtQosSvcIngPolQueEntry 2 }
+
+prvtQosSvcIngPolQueShaperProf OBJECT-TYPE
+    SYNTAX      PrvtQosServShaperProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaper profile used by this policy's queue.
+         Sets to this object will fail if the specified shaper profile does not already exist."
+    ::= { prvtQosSvcIngPolQueEntry 3 }
+
+prvtQosSvcIngPolQueTailDropProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The tail drop profile used by this policy's queue.
+         Sets to this object will fail if the specified tail drop profile does not already exist."
+    ::= { prvtQosSvcIngPolQueEntry 4 }
+
+prvtQosPortPolObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 7 }
+
+prvtQosPortIngPolTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosPortIngPolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Port Ingress Policy Table
+         Each entry in this table defines an ingress policy which may be assigned
+         to a port."
+    ::= { prvtQosPortPolObjects 1 }
+
+prvtQosPortIngPolEntry OBJECT-TYPE
+    SYNTAX      PrvtQosPortIngPolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosPortIngPolTable."
+    INDEX       { prvtQosPortIngPolName }
+    ::= { prvtQosPortIngPolTable 1 }
+
+PrvtQosPortIngPolEntry ::= SEQUENCE {
+    prvtQosPortIngPolName           PrvtQosPolicyNameType,
+    prvtQosPortIngPolRowStatus      RowStatus,
+    prvtQosPortIngPolDescr          PrvtQosDescrType,
+    prvtQosPortIngPolMapProf        PrvtQosPolicyNameType,
+    prvtQosPortIngPolTrustMode      PrvtQosTrustType,
+    prvtQosPortIngPolUntrToFcValue  PrvtQosFcType,
+    prvtQosPortIngPolUntrToFcColor  PrvtQosColorType,
+    prvtQosPortIngPolFcToQueProf    PrvtQosPolicyNameType
+}
+
+prvtQosPortIngPolName OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Port ingress policy name."
+    ::= { prvtQosPortIngPolEntry 1 }
+
+prvtQosPortIngPolRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this policy."
+    ::= { prvtQosPortIngPolEntry 2 }
+
+prvtQosPortIngPolDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the policy."
+    ::= { prvtQosPortIngPolEntry 3 }
+
+prvtQosPortIngPolMapProf OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mapping profile used by this policy.
+         Sets to this object will fail if the specified mapping profile does not already exist."
+    ::= { prvtQosPortIngPolEntry 4 }
+
+prvtQosPortIngPolTrustMode OBJECT-TYPE
+    SYNTAX      PrvtQosTrustType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The trust mode used by this policy."
+    ::= { prvtQosPortIngPolEntry 5 }
+
+prvtQosPortIngPolUntrToFcValue OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to be assigned to untrusted traffic."
+    ::= { prvtQosPortIngPolEntry 6 }
+
+prvtQosPortIngPolUntrToFcColor OBJECT-TYPE
+    SYNTAX      PrvtQosColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to be assigned to untrusted traffic."
+    ::= { prvtQosPortIngPolEntry 7 }
+
+prvtQosPortIngPolFcToQueProf OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The fc-to-queue profile used by this policy.
+         Sets to this object will fail if the specified fc-to-queue profile does not already exist."
+    ::= { prvtQosPortIngPolEntry 8 }
+
+prvtQosPortEgrPolTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosPortEgrPolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Port Egress Policy Table
+         Each entry in this table defines an egress policy which may be assigned
+         to a port."
+    ::= { prvtQosPortPolObjects 2 }
+
+prvtQosPortEgrPolEntry OBJECT-TYPE
+    SYNTAX      PrvtQosPortEgrPolEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosPortEgrPolTable."
+    INDEX       { prvtQosPortEgrPolName }
+    ::= { prvtQosPortEgrPolTable 1 }
+
+PrvtQosPortEgrPolEntry ::= SEQUENCE {
+    prvtQosPortEgrPolName           PrvtQosPolicyNameType,
+    prvtQosPortEgrPolRowStatus      RowStatus,
+    prvtQosPortEgrPolDescr          PrvtQosDescrType,
+    prvtQosPortEgrPolShaperProf     PrvtQosProfileIdType,
+    prvtQosPortEgrPolTailDropProf   PrvtQosProfileIdType,
+    prvtQosPortEgrPolSredProf       PrvtQosProfileIdType,
+    prvtQosPortEgrPolSchedProf      PrvtQosProfileIdType,
+    prvtQosPortEgrPolWredProf       PrvtQosProfileIdType
+}
+
+prvtQosPortEgrPolName OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Egress port policy name."
+    ::= { prvtQosPortEgrPolEntry 1 }
+
+prvtQosPortEgrPolRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this policy."
+    ::= { prvtQosPortEgrPolEntry 2 }
+
+prvtQosPortEgrPolDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the policy."
+    ::= { prvtQosPortEgrPolEntry 3 }
+
+prvtQosPortEgrPolShaperProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaper profile used by this policy.
+         Sets to this object will fail if the specified shaper profile does not already exist."
+    ::= { prvtQosPortEgrPolEntry 4 }
+
+prvtQosPortEgrPolTailDropProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The tail drop profile used by this policy.
+         Sets to this object will fail if the specified tail drop profile does not already exist."
+    ::= { prvtQosPortEgrPolEntry 5 }
+
+prvtQosPortEgrPolSredProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The SRED profile used by this policy.
+         Sets to this object will fail if the specified SRED profile does not already exist."
+    ::= { prvtQosPortEgrPolEntry 6 }
+
+prvtQosPortEgrPolSchedProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The scheduling profile used by this policy.
+         Sets to this object will fail if the specified scheduling profile does not already exist."
+    ::= { prvtQosPortEgrPolEntry 7 }
+
+prvtQosPortEgrPolWredProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WRED profile used by this policy.
+         Sets to this object will fail if the specified WRED profile does not already exist."
+    ::= { prvtQosPortEgrPolEntry 8 }
+
+prvtQosPortEgrPolQueTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosPortEgrPolQueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Port Egress Queue Policy Table
+         Each entry in this table defines the characteristics of a queue belonging to an
+         egress port policy."
+    ::= { prvtQosPortPolObjects 3 }
+
+prvtQosPortEgrPolQueEntry OBJECT-TYPE
+    SYNTAX      PrvtQosPortEgrPolQueEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosPortEgrPolQueTable."
+    INDEX       { prvtQosPortEgrPolName, prvtQosPortEgrPolQueId }
+    ::= { prvtQosPortEgrPolQueTable 1 }
+
+PrvtQosPortEgrPolQueEntry ::= SEQUENCE {
+    prvtQosPortEgrPolQueId              PrvtQosQueueIdType,
+    prvtQosPortEgrPolQueRowStatus       RowStatus,
+    prvtQosPortEgrPolQueShaperProf      PrvtQosProfileIdType,
+    prvtQosPortEgrPolQueTailDropProf    PrvtQosProfileIdType,
+    prvtQosPortEgrPolQueSredProf        PrvtQosProfileIdType,
+    prvtQosPortEgrPolQueWredProf        PrvtQosProfileIdType
+}
+
+prvtQosPortEgrPolQueId OBJECT-TYPE
+    SYNTAX      PrvtQosQueueIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The queue ID to which this row applies."
+    ::= { prvtQosPortEgrPolQueEntry 1 }
+
+prvtQosPortEgrPolQueRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this policy's queue."
+    ::= { prvtQosPortEgrPolQueEntry 2 }
+
+prvtQosPortEgrPolQueShaperProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The shaper profile used by this policy's queue.
+         Sets to this object will fail if the specified shaper profile does not already exist."
+    ::= { prvtQosPortEgrPolQueEntry 3 }
+
+prvtQosPortEgrPolQueTailDropProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The tail drop profile used by this policy's queue.
+         Sets to this object will fail if the specified tail drop profile does not already exist."
+    ::= { prvtQosPortEgrPolQueEntry 4 }
+
+prvtQosPortEgrPolQueSredProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The SRED profile used by this policy's queue.
+         Sets to this object will fail if the specified SRED profile does not already exist."
+    ::= { prvtQosPortEgrPolQueEntry 5 }
+
+prvtQosPortEgrPolQueWredProf OBJECT-TYPE
+    SYNTAX      PrvtQosProfileIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The WRED profile used by this policy's queue.
+         Sets to this object will fail if the specified WRED profile does not already exist."
+    ::= { prvtQosPortEgrPolQueEntry 6 }
+
+prvtQosInterfaceObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 8 }
+
+prvtQosInterfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Qos Interface Table
+         Each entry in this table defines what QOS policies to assign to an interface."
+    ::= { prvtQosInterfaceObjects 1 }
+
+prvtQosInterfaceEntry OBJECT-TYPE
+    SYNTAX      PrvtQosInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosInterfaceTable."
+    INDEX       { ifIndex }
+    ::= { prvtQosInterfaceTable 1 }
+
+PrvtQosInterfaceEntry ::= SEQUENCE {
+    prvtQosInterfaceRowStatus   RowStatus,
+    prvtQosInterfaceIngPolicy   PrvtQosPolicyNameOrNoneType,
+    prvtQosInterfaceEgrPolicy   PrvtQosPolicyNameOrNoneType
+}
+
+prvtQosInterfaceRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this port."
+    ::= { prvtQosInterfaceEntry 2 }
+
+prvtQosInterfaceIngPolicy OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameOrNoneType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The port ingress policy to be applied to this port.
+         The policy should be fully configured in advance before being applied to a port."
+    ::= { prvtQosInterfaceEntry 3 }
+
+prvtQosInterfaceEgrPolicy OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameOrNoneType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The port egress policy to be applied to this port.
+         The policy should be fully configured in advance before being applied to a port."
+    ::= { prvtQosInterfaceEntry 4 }
+
+prvtQosServiceObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 9 }
+
+prvtQosServiceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosServiceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Qos Service Table
+         Each entry in this table defines the QOS characteristics to assign to an service."
+    ::= { prvtQosServiceObjects 1 }
+
+prvtQosServiceEntry OBJECT-TYPE
+    SYNTAX      PrvtQosServiceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosServiceTable."
+    INDEX       { prvtQosServiceId }
+    ::= { prvtQosServiceTable 1 }
+
+PrvtQosServiceEntry ::= SEQUENCE {
+    prvtQosServiceId                PrvtQosServiceIdType,
+    prvtQosServiceRowStatus         RowStatus,
+    prvtQosServiceIngressPolicy     PrvtQosPolicyNameType
+}
+
+prvtQosServiceId OBJECT-TYPE
+    SYNTAX      PrvtQosServiceIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ID of a service to which this row applies."
+    ::= { prvtQosServiceEntry 1 }
+
+prvtQosServiceRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this service.
+         Creation of a new row will fail if the service specified in prvtQosServiceId does not exist."
+    ::= { prvtQosServiceEntry 2 }
+
+prvtQosServiceIngressPolicy OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The service ingress policy to be applied on a service.
+         The policy should be fully configured in advance before being applied to a service."
+    ::= { prvtQosServiceEntry 3 }
+
+prvtQosServSapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosServSapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Qos Sap Table
+         Each entry in this table defines the QOS characteristics to assign to a specific
+         SAP within a service."
+    ::= { prvtQosServiceObjects 2 }
+
+prvtQosServSapEntry OBJECT-TYPE
+    SYNTAX      PrvtQosServSapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosServSapTable."
+    INDEX       { prvtQosServiceId, ifIndex, prvtQosServSapEncapValue }
+    ::= { prvtQosServSapTable 1 }
+
+PrvtQosServSapEntry ::= SEQUENCE {
+    prvtQosServSapEncapValue    PrvtQosEncapType,
+    prvtQosServSapRowStatus     RowStatus,
+    prvtQosServSapPolicyEnable  TruthValue
+}
+
+prvtQosServSapEncapValue OBJECT-TYPE
+    SYNTAX      PrvtQosEncapType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The value of the encapsulation label to which this row applies."
+    ::= { prvtQosServSapEntry 2 }
+
+prvtQosServSapRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this service's SAP.
+         Creation of a new row will fail if the SAP specified
+         does not exist for the service specified by prvtQosServiceId."
+    ::= { prvtQosServSapEntry 3 }
+
+prvtQosServSapPolicyEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Apply the policy specified in prvtQosServiceIngressPolicy to this service's SAP."
+    ::= { prvtQosServSapEntry 4 }
+
+prvtQosFcToQueueProfObjects OBJECT IDENTIFIER
+    ::= { prvtQosMIBObjects 10 }
+
+prvtQosFcToQueueProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosFcToQueueProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Fc-to-queue Profile Table
+         Each entry in this table defines a fc-to-queue profile."
+    ::= { prvtQosFcToQueueProfObjects 1 }
+
+prvtQosFcToQueueProfileEntry OBJECT-TYPE
+    SYNTAX      PrvtQosFcToQueueProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosFcToQueueProfileTable."
+    INDEX       { prvtQosFcToQueueProfileName }
+    ::= { prvtQosFcToQueueProfileTable 1 }
+
+PrvtQosFcToQueueProfileEntry ::= SEQUENCE {
+    prvtQosFcToQueueProfileName         PrvtQosPolicyNameType,
+    prvtQosFcToQueueProfileRowStatus    RowStatus,
+    prvtQosFcToQueueProfileDescr        PrvtQosDescrType
+}
+
+prvtQosFcToQueueProfileName OBJECT-TYPE
+    SYNTAX      PrvtQosPolicyNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a fc-to-queue profile."
+    ::= { prvtQosFcToQueueProfileEntry 1 }
+
+prvtQosFcToQueueProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile."
+    ::= { prvtQosFcToQueueProfileEntry 2 }
+
+prvtQosFcToQueueProfileDescr OBJECT-TYPE
+    SYNTAX      PrvtQosDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "User-provided description of the profile."
+    ::= { prvtQosFcToQueueProfileEntry 3 }
+
+prvtQosFcToQueueProfFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtQosFcToQueueProfFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Fc-to-queue Profile FC-to-queue Table
+         Each entry in this table defines how a fc-to-queue-profile maps a specific forwarding
+         class to queue value."
+    ::= { prvtQosFcToQueueProfObjects 2 }
+
+prvtQosFcToQueueProfFcEntry OBJECT-TYPE
+    SYNTAX      PrvtQosFcToQueueProfFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtQosFcToQueueProfFcTable."
+    INDEX       { prvtQosFcToQueueProfileName, 
+                  prvtQosRemarkProfFcToVptId, 
+                  prvtQosRemarkProfFcToVptColor }
+    ::= { prvtQosFcToQueueProfFcTable 1 }
+
+PrvtQosFcToQueueProfFcEntry ::= SEQUENCE {
+    prvtQosFcToQueueProfFcName          PrvtQosFcType,
+    prvtQosFcToQueueProfFcRowStatus     RowStatus,
+    prvtQosFcToQueueProfFcUniQueId      PrvtQosQueueIdType,
+    prvtQosFcToQueueProfFcMulQueId      PrvtQosQueueIdType
+}
+
+prvtQosFcToQueueProfFcName OBJECT-TYPE
+    SYNTAX      PrvtQosFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The Forwarding Class to which this row applies."
+    ::= { prvtQosFcToQueueProfFcEntry 1 }
+
+prvtQosFcToQueueProfFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this profile's forwarding class."
+    ::= { prvtQosFcToQueueProfFcEntry 2 }
+
+prvtQosFcToQueueProfFcUniQueId OBJECT-TYPE
+    SYNTAX      PrvtQosQueueIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The unicast queue ID which is mapped to the fc to which this row applies.UC queue range 1-8."
+    ::= { prvtQosFcToQueueProfFcEntry 3 }
+
+prvtQosFcToQueueProfFcMulQueId OBJECT-TYPE
+    SYNTAX      PrvtQosQueueIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The multicast queue ID which is mapped to the fc to which this row applies.MC queue range 1-2 7-8"
+    ::= { prvtQosFcToQueueProfFcEntry 4 }
+
+END -- end of module PRVT-QOS-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-RAPS-MIB b/MIBS/telco-systems/binox/PRVT-RAPS-MIB
new file mode 100644
index 0000000..b8b08f4
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-RAPS-MIB
@@ -0,0 +1,1273 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-RAPS-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-RAPS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex, ifIndex
+        FROM IF-MIB
+    serviceAccessSwitch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    DisplayString, MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtRapsMIB MODULE-IDENTITY
+    LAST-UPDATED "201011110000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The SNMP MIB module for Ring Automatic Protection Switching (G.8032)."
+    REVISION    "201011110000Z"
+    DESCRIPTION 
+        "Added description for rings and subrings."
+    REVISION    "201003080000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { serviceAccessSwitch 4 }
+
+
+PrvtRapsInstIndexType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A Ring APS instance index."
+    SYNTAX      Unsigned32 (1..10)
+
+PrvtRapsRingIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Ring identifier."
+    SYNTAX      Integer32 (1..255)
+
+PrvtRapsVlanIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "VLAN identifier"
+    SYNTAX      Integer32 (1..4094)
+
+PrvtRapsLinkOperStatusType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Operational status of a link."
+    SYNTAX      INTEGER { up(0), blocked(1), failed(2), na(3) }
+
+PrvtRapsMepIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A maintenance entity group end point identifier."
+    SYNTAX      Integer32 (1..8191)
+
+PrvtRapsLinkAggIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A link aggregation identifier."
+    SYNTAX      Integer32 (1..14)
+
+PrvtRapsHoldOffType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Hold-off timer value in milliseconds.
+         Valid values are increments of 100 milliseconds."
+    SYNTAX      Integer32 (0..10000)
+
+PrvtRapsWaitTimerType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Wait to Restore timer value in minutes."
+    SYNTAX      Integer32 (1..12)
+
+PrvtRapsCfmLevelType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Connectivity Fault Management level."
+    SYNTAX      Integer32 (0..7)
+
+PrvtRapsGuardTimerType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Guard timer value in milliseconds.
+         Valid values are increments of 10 milliseconds."
+    SYNTAX      Integer32 (10..2000)
+
+PrvtRapsBlockTimerType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Wait to Block timer value in milliseconds.
+         This time is actually the Guard Timer + 5 seconds."
+    SYNTAX      Integer32 (5010..7000)
+
+PrvtRapsModeType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The G.8032 mode."
+    SYNTAX      INTEGER { version1(1), version2(2) }
+
+PrvtRapsRoleType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The role of a node inside a ring."
+    SYNTAX      INTEGER { simpleNode(0), rplNeighbor(1), rplOwner(2) }
+
+PrvtRapsInstStatusType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "R-APS instance operational status."
+    SYNTAX      INTEGER { up(1), down(2) }
+
+PrvtRapsStatesType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "R-APS instance states."
+    SYNTAX      INTEGER { init(0), idle(1), protection(2), 
+                    manualSwitch(3), forcedSwitch(4), pending(5) }
+
+PrvtRapsReceivedCommandType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Request/State field of received R-APS message."
+    SYNTAX      INTEGER { noRequest(0), manualSwitch(7), signalFail(11), 
+                    forcedSwitch(13), event(14), na(16) }
+
+PrvtRapsReceivedInfoType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Bits field of received R-APS message."
+    SYNTAX      BITS { bpr(0), dnf(1), rp(2) }
+
+PrvtRapsTopPriCmdType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Top Priority Request and Status Values."
+    SYNTAX      INTEGER { clear(0), forcedSwitch(1), 
+                    remoteForcedSwitch(2), signalFail(3), 
+                    signalFailRecover(4), remoteSignalFail(5), 
+                    remoteManualSwitch(6), manualSwitch(7), wtrExpire(8), 
+                    wtrRunning(9), wtbExpire(10), wtbRunning(11), 
+                    noRequestRplBlocked(12), noRequest(13), na(14) }
+
+PrvtRapsActionType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Used to perform an action.
+         Setting to 'performAction' will cause the action to be performed.
+         Setting to 'idle' (or any other value except 'performAction') has
+         no effect (no action is performed).
+         Reads will always return 'idle'."
+    SYNTAX      INTEGER { idle(1), performAction(2) }
+
+PrvtRapsIfIndexOrAgIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of a physical port or the ID of a LAG interface.
+         LAG interfaces have values 1..14.
+         Physical ports (ifIndex) have values > 1000."
+    SYNTAX      Integer32 (1..2147483647)
+
+PrvtRapsMonitoringMethodType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Ethernet ring protection monitoring methods"
+    SYNTAX      INTEGER { ccm(1), link-status(2) }
+
+prvtRapsMIBNotifications OBJECT IDENTIFIER
+    ::= { prvtRapsMIB 0 }
+
+prvtRapsMIBObjects OBJECT IDENTIFIER
+    ::= { prvtRapsMIB 1 }
+
+prvtRapsInstTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance table.
+         Each entry in this table defines an instance of a Ring APS."
+    ::= { prvtRapsMIBObjects 1 }
+
+prvtRapsInstEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstTable."
+    INDEX       { prvtRapsInstIndex }
+    ::= { prvtRapsInstTable 1 }
+
+PrvtRapsInstEntry ::= SEQUENCE {
+    prvtRapsInstIndex               PrvtRapsInstIndexType,
+    prvtRapsInstRowStatus           RowStatus,
+    prvtRapsInstMode                PrvtRapsModeType,
+    prvtRapsInstRingId              PrvtRapsRingIdType,
+    prvtRapsInstRole                PrvtRapsRoleType,
+    prvtRapsInstControlVlan         PrvtRapsVlanIdType,
+    prvtRapsInstCfmDomainLevel      PrvtRapsCfmLevelType,
+    prvtRapsInstRevertiveMode       TruthValue,
+    prvtRapsInstDisableVirtChan     TruthValue,
+    prvtRapsInstHoldOffTimer        PrvtRapsHoldOffType,
+    prvtRapsInstWaitToRestoreTimer  PrvtRapsWaitTimerType,
+    prvtRapsInstGuardTimer          PrvtRapsGuardTimerType,
+    prvtRapsInstWaitToBlockTimer    PrvtRapsBlockTimerType,
+    prvtRapsInstShutdown            TruthValue,
+    prvtRapsInstClear               PrvtRapsActionType,
+    prvtRapsInstOperStatus          PrvtRapsInstStatusType,
+    prvtRapsInstRapsState           PrvtRapsStatesType,
+    prvtRapsInstTopPriCmd           PrvtRapsTopPriCmdType,
+    prvtRapsInstDescription         DisplayString,
+    prvtRapsInstControlProtocol     INTEGER
+}
+
+prvtRapsInstIndex OBJECT-TYPE
+    SYNTAX      PrvtRapsInstIndexType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary index uniquely identifying a Ring APS instance."
+    ::= { prvtRapsInstEntry 1 }
+
+prvtRapsInstRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this R-APS instance."
+    ::= { prvtRapsInstEntry 2 }
+
+prvtRapsInstMode OBJECT-TYPE
+    SYNTAX      PrvtRapsModeType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The G.8032 mode for this R-APS instance.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
+         In version 1 mode (prvtRapsInstMode equals 'version1'),
+         ring ID (prvtRapsInstRingId) must be 1."
+    ::= { prvtRapsInstEntry 3 }
+
+prvtRapsInstRingId OBJECT-TYPE
+    SYNTAX      PrvtRapsRingIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Ring ID for this R-APS instance.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
+         In version 1 mode (prvtRapsInstMode equals 'version1'),
+         ring ID (prvtRapsInstRingId) must be 1."
+    ::= { prvtRapsInstEntry 4 }
+
+prvtRapsInstRole OBJECT-TYPE
+    SYNTAX      PrvtRapsRoleType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The role of the node for this R-APS instance.
+         Must perform shutdown to change this object."
+    ::= { prvtRapsInstEntry 5 }
+
+prvtRapsInstControlVlan OBJECT-TYPE
+    SYNTAX      PrvtRapsVlanIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The control VLAN for this R-APS instance.
+         When main ring's control protocol is vpls (prvtRapsInstControlProtocol equals 'vpls'), this
+         should be set equal to the ring's instance ID (prvtRapsInstIndex).
+         This object must be set to the ID of an existing VLAN.
+         Each R-APS instance must use a unique VLAN for the control VLAN.
+         Must perform shutdown to change this object."
+    ::= { prvtRapsInstEntry 6 }
+
+prvtRapsInstCfmDomainLevel OBJECT-TYPE
+    SYNTAX      PrvtRapsCfmLevelType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The CFM domain level for this R-APS instance.
+         Must perform shutdown to change this object."
+    ::= { prvtRapsInstEntry 7 }
+
+prvtRapsInstRevertiveMode OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to select revertive behavior for this R-APS instance.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
+         Non-revertive behavior is not available in version 1 mode."
+    ::= { prvtRapsInstEntry 8 }
+
+prvtRapsInstDisableVirtChan OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to select that the node is part of a sub-ring without
+         a RAPS virtual channel.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
+         Must be set 'false' when in version 1 mode."
+    ::= { prvtRapsInstEntry 9 }
+
+prvtRapsInstHoldOffTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsHoldOffType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The hold-off timer time-out value for this R-APS instance.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps')."
+    ::= { prvtRapsInstEntry 10 }
+
+prvtRapsInstWaitToRestoreTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsWaitTimerType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The wait-to-restore timer time-out value for this R-APS instance.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps')."
+    ::= { prvtRapsInstEntry 11 }
+
+prvtRapsInstGuardTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsGuardTimerType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The guard timer time-out value for this R-APS instance.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps')."
+    ::= { prvtRapsInstEntry 12 }
+
+prvtRapsInstWaitToBlockTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsBlockTimerType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The wait to block timer time-out value for this sub-ring."
+    ::= { prvtRapsInstEntry 13 }
+
+prvtRapsInstShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to de-activate this R-APS instance."
+    ::= { prvtRapsInstEntry 14 }
+
+prvtRapsInstClear OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sends the Clear command to this R-APS instance."
+    ::= { prvtRapsInstEntry 15 }
+
+prvtRapsInstOperStatus OBJECT-TYPE
+    SYNTAX      PrvtRapsInstStatusType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational status of this R-APS instance."
+    ::= { prvtRapsInstEntry 16 }
+
+prvtRapsInstRapsState OBJECT-TYPE
+    SYNTAX      PrvtRapsStatesType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current state for this R-APS instance."
+    ::= { prvtRapsInstEntry 17 }
+
+prvtRapsInstTopPriCmd OBJECT-TYPE
+    SYNTAX      PrvtRapsTopPriCmdType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The received Top Priority Request and Status value for this R-APS instance."
+    ::= { prvtRapsInstEntry 18 }
+
+prvtRapsInstDescription OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RAPS instance description."
+    ::= { prvtRapsInstEntry 19 }
+
+prvtRapsInstControlProtocol OBJECT-TYPE
+    SYNTAX      INTEGER { raps(0), vpls(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The protocol that controls the main ring."
+    DEFVAL      { raps }
+    ::= { prvtRapsInstEntry 20 }
+
+prvtRapsInstMonVlanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsInstMonVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Monitor VLAN Table
+         Each entry in this table defines a VLAN that will be monitored.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps')."
+    ::= { prvtRapsMIBObjects 2 }
+
+prvtRapsInstMonVlanEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsInstMonVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstMonVlanTable."
+    INDEX       { prvtRapsInstIndex, prvtRapsInstMonVlanId }
+    ::= { prvtRapsInstMonVlanTable 1 }
+
+PrvtRapsInstMonVlanEntry ::= SEQUENCE {
+    prvtRapsInstMonVlanId           PrvtRapsVlanIdType,
+    prvtRapsInstMonVlanRowStatus    RowStatus
+}
+
+prvtRapsInstMonVlanId OBJECT-TYPE
+    SYNTAX      PrvtRapsVlanIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a VLAN to be monitored.
+         This object must be the ID of an existing VLAN.
+         Must not be the same VLAN as the control VLAN (prvtRapsInstControlVlan)."
+    ::= { prvtRapsInstMonVlanEntry 1 }
+
+prvtRapsInstMonVlanRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this monitored VLAN."
+    ::= { prvtRapsInstMonVlanEntry 2 }
+
+prvtRapsInstRingPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsInstRingPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Ring Port Table.
+         Each entry in this table defines a port belonging to a R-APS instance.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
+         Exactly two interfaces must be defined per instance. This includes physical
+         ports (defined in prvtRapsInstRingPortTable) and LAG interfaces (defined
+         in prvtRapsInstRingLagTable). In the case when one physical port and one
+         LAG interface is used, the two port index values must be unique (i.e.
+         prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex)"
+    ::= { prvtRapsMIBObjects 3 }
+
+prvtRapsInstRingPortEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsInstRingPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstRingPortTable."
+    INDEX       { prvtRapsInstIndex, prvtRapsInstRingPortIndex }
+    ::= { prvtRapsInstRingPortTable 1 }
+
+PrvtRapsInstRingPortEntry ::= SEQUENCE {
+    prvtRapsInstRingPortIndex               Unsigned32,
+    prvtRapsInstRingPortRowStatus           RowStatus,
+    prvtRapsInstRingPortIfIndex             InterfaceIndex,
+    prvtRapsInstRingPortMep                 PrvtRapsMepIdType,
+    prvtRapsInstRingPortRpl                 TruthValue,
+    prvtRapsInstRingPortManSwitch           PrvtRapsActionType,
+    prvtRapsInstRingPortForcedSwitch        PrvtRapsActionType,
+    prvtRapsInstRingPortMonitoringMethod    PrvtRapsMonitoringMethodType
+}
+
+prvtRapsInstRingPortIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..1)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary index uniquely identifying a physical port belonging to a
+         R-APS instance.
+         When a physical port and a LAG port are used in the same R-APS instance,
+         the two ports must use unique index values (i.e.
+         prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex)."
+    ::= { prvtRapsInstRingPortEntry 1 }
+
+prvtRapsInstRingPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this ring port."
+    ::= { prvtRapsInstRingPortEntry 2 }
+
+prvtRapsInstRingPortIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of the physical port assigned to this ring port.
+         No two ports within the same ring instance can use the same physical port."
+    ::= { prvtRapsInstRingPortEntry 3 }
+
+prvtRapsInstRingPortMep OBJECT-TYPE
+    SYNTAX      PrvtRapsMepIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peer maintenance entity group end point ID that should monitor this ring port.
+         No two ports within the same ring instance can use the same MEP ID."
+    ::= { prvtRapsInstRingPortEntry 4 }
+
+prvtRapsInstRingPortRpl OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to define this ring port as a Ring Protection Link port.
+         Exactly one RPL port must be defined when ring role (prvtRapsInstRole)
+         is not 'simpleNode'.
+         In 'simpleNode' role, no RPL ports must be defined."
+    ::= { prvtRapsInstRingPortEntry 5 }
+
+prvtRapsInstRingPortManSwitch OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Manual Switch command to this ring port."
+    ::= { prvtRapsInstRingPortEntry 6 }
+
+prvtRapsInstRingPortForcedSwitch OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Forced Switch command to this ring port."
+    ::= { prvtRapsInstRingPortEntry 7 }
+
+prvtRapsInstRingPortMonitoringMethod OBJECT-TYPE
+    SYNTAX      PrvtRapsMonitoringMethodType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Ethernet ring protection monitoring methods"
+    ::= { prvtRapsInstRingPortEntry 8 }
+
+prvtRapsInstRingLagTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsInstRingLagEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Ring LAG Table
+         Each entry in this table defines a Link Aggregation Group interface belonging
+         to a R-APS instance.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
+         Exactly two interfaces must be defined per instance. This includes physical
+         ports (defined in prvtRapsInstRingPortTable) and LAG interfaces (defined
+         in prvtRapsInstRingLagTable)."
+    ::= { prvtRapsMIBObjects 4 }
+
+prvtRapsInstRingLagEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsInstRingLagEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstRingLagTable."
+    INDEX       { prvtRapsInstIndex, prvtRapsInstRingLagIndex }
+    ::= { prvtRapsInstRingLagTable 1 }
+
+PrvtRapsInstRingLagEntry ::= SEQUENCE {
+    prvtRapsInstRingLagIndex            Unsigned32,
+    prvtRapsInstRingLagRowStatus        RowStatus,
+    prvtRapsInstRingLagId               PrvtRapsLinkAggIdType,
+    prvtRapsInstRingLagMep              PrvtRapsMepIdType,
+    prvtRapsInstRingLagRpl              TruthValue,
+    prvtRapsInstRingLagManSwitch        PrvtRapsActionType,
+    prvtRapsInstRingLagForcedSwitch     PrvtRapsActionType
+}
+
+prvtRapsInstRingLagIndex OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..1)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary index uniquely identifying a LAG interface belonging to a
+         R-APS instance.
+         When a physical port and a LAG port are used in the same R-APS instance,
+         the two ports must use unique index values (i.e.
+         prvtRapsInstRingPortIndex must not equal prvtRapsInstRingLagIndex)."
+    ::= { prvtRapsInstRingLagEntry 1 }
+
+prvtRapsInstRingLagRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this LAG interface."
+    ::= { prvtRapsInstRingLagEntry 2 }
+
+prvtRapsInstRingLagId OBJECT-TYPE
+    SYNTAX      PrvtRapsLinkAggIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ID of a LAG interface belonging to a R-APS instance.
+         This object must be set to the ID of an existing LAG interface.
+         No two LAG ports within the same ring instance can use the same LAG port."
+    ::= { prvtRapsInstRingLagEntry 3 }
+
+prvtRapsInstRingLagMep OBJECT-TYPE
+    SYNTAX      PrvtRapsMepIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peer maintenance entity group end point ID that should monitor this LAG interface.
+         No two LAG ports within the same ring instance can use the same MEP ID."
+    ::= { prvtRapsInstRingLagEntry 4 }
+
+prvtRapsInstRingLagRpl OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to define this ring LAG port as a Ring Protection Link port.
+         Exactly one RPL port must be defined when ring role (prvtRapsInstRole)
+         is not 'simpleNode'.
+         In 'simpleNode' role, no RPL ports must be defined."
+    ::= { prvtRapsInstRingLagEntry 5 }
+
+prvtRapsInstRingLagManSwitch OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Manual Switch command to this LAG interface."
+    ::= { prvtRapsInstRingLagEntry 6 }
+
+prvtRapsInstRingLagForcedSwitch OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Forced Switch command to this LAG interface."
+    ::= { prvtRapsInstRingLagEntry 7 }
+
+prvtRapsInstPortStatusTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsInstPortStatusEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Port Status Table
+         Each entry in this table gives status information concerning a
+         particular port (physical port or LAG interface port) belonging
+         to a R-APS instance."
+    ::= { prvtRapsMIBObjects 5 }
+
+prvtRapsInstPortStatusEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsInstPortStatusEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstPortStatusTable."
+    INDEX       { prvtRapsInstIndex, prvtRapsInstPortStatusIfIndex }
+    ::= { prvtRapsInstPortStatusTable 1 }
+
+PrvtRapsInstPortStatusEntry ::= SEQUENCE {
+    prvtRapsInstPortStatusIfIndex       PrvtRapsIfIndexOrAgIdType,
+    prvtRapsInstPortStatusLink          PrvtRapsLinkOperStatusType,
+    prvtRapsInstPortStatusRemoteMep     PrvtRapsMepIdType,
+    prvtRapsInstPortStatusRcvdNodeId    MacAddress,
+    prvtRapsInstPortStatusRcvdCmd       PrvtRapsReceivedCommandType,
+    prvtRapsInstPortStatusRcvdInfo      PrvtRapsReceivedInfoType
+}
+
+prvtRapsInstPortStatusIfIndex OBJECT-TYPE
+    SYNTAX      PrvtRapsIfIndexOrAgIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a physical port (ifIndex) or a LAG port (LAG ID)
+         belonging to a R-APS instance."
+    ::= { prvtRapsInstPortStatusEntry 1 }
+
+prvtRapsInstPortStatusLink OBJECT-TYPE
+    SYNTAX      PrvtRapsLinkOperStatusType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational status of this port."
+    ::= { prvtRapsInstPortStatusEntry 2 }
+
+prvtRapsInstPortStatusRemoteMep OBJECT-TYPE
+    SYNTAX      PrvtRapsMepIdType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The maintenance entity group end point ID for the remote port connected to this port."
+    ::= { prvtRapsInstPortStatusEntry 3 }
+
+prvtRapsInstPortStatusRcvdNodeId OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote R-APS device connected to this port."
+    ::= { prvtRapsInstPortStatusEntry 4 }
+
+prvtRapsInstPortStatusRcvdCmd OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedCommandType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The command received on this port."
+    ::= { prvtRapsInstPortStatusEntry 5 }
+
+prvtRapsInstPortStatusRcvdInfo OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedInfoType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The info received on this port."
+    ::= { prvtRapsInstPortStatusEntry 6 }
+
+prvtRapsInstSubRingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsInstSubRingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Sub-ring Table
+         Each entry in this table defines a sub-ring belonging to a R-APS instance.
+         Sub-rings are not available in version 1 mode."
+    ::= { prvtRapsMIBObjects 6 }
+
+prvtRapsInstSubRingEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsInstSubRingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstSubRingTable."
+    INDEX       { prvtRapsInstIndex, prvtRapsInstSubRingIndex }
+    ::= { prvtRapsInstSubRingTable 1 }
+
+PrvtRapsInstSubRingEntry ::= SEQUENCE {
+    prvtRapsInstSubRingIndex            PrvtRapsInstIndexType,
+    prvtRapsInstSubRingRowStatus        RowStatus,
+    prvtRapsInstSubRingId               PrvtRapsRingIdType,
+    prvtRapsInstSubRingRole             PrvtRapsRoleType,
+    prvtRapsInstSubRingVirtChanVlan     PrvtRapsVlanIdType,
+    prvtRapsInstSubRingRevertiveMode    TruthValue,
+    prvtRapsInstSubRingHoldOffTimer     PrvtRapsHoldOffType,
+    prvtRapsInstSubRingWaitTimer        PrvtRapsWaitTimerType,
+    prvtRapsInstSubRingGuardTimer       PrvtRapsGuardTimerType,
+    prvtRapsInstSubRingBlockTimer       PrvtRapsBlockTimerType,
+    prvtRapsInstSubRingPropTopChng      TruthValue,
+    prvtRapsInstSubRingShutdown         TruthValue,
+    prvtRapsInstSubRingClear            PrvtRapsActionType,
+    prvtRapsInstSubRingManualSwitch     PrvtRapsActionType,
+    prvtRapsInstSubRingForcedSwitch     PrvtRapsActionType,
+    prvtRapsInstSubRingOperStatus       PrvtRapsInstStatusType,
+    prvtRapsInstSubRingRapsState        PrvtRapsStatesType,
+    prvtRapsInstSubRingTopPriCmd        PrvtRapsTopPriCmdType,
+    prvtRapsInstSubRingPortName         OCTET STRING,
+    prvtRapsInstSubRingLinkStatus       PrvtRapsLinkOperStatusType,
+    prvtRapsInstSubRingRcvdNodeId       MacAddress,
+    prvtRapsInstSubRingRcvdCmd          PrvtRapsReceivedCommandType,
+    prvtRapsInstSubRingRcvdInfo         PrvtRapsReceivedInfoType,
+    prvtRapsInstSubRingDescription      DisplayString,
+    prvtRapsInstSubRingVcRcvdNodeId     MacAddress,
+    prvtRapsInstSubRingVcRcvdCmd        PrvtRapsReceivedCommandType,
+    prvtRapsInstSubRingVcRcvdInfo       PrvtRapsReceivedInfoType,
+    prvtRapsInstSubRingVirtChanSvc      Unsigned32,
+    prvtRapsInstSubRingControlVlan      PrvtRapsVlanIdType
+}
+
+prvtRapsInstSubRingIndex OBJECT-TYPE
+    SYNTAX      PrvtRapsInstIndexType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary index uniquely identifying a sub-ring for this R-APS instance."
+    ::= { prvtRapsInstSubRingEntry 1 }
+
+prvtRapsInstSubRingRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 2 }
+
+prvtRapsInstSubRingId OBJECT-TYPE
+    SYNTAX      PrvtRapsRingIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ring ID for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 3 }
+
+prvtRapsInstSubRingRole OBJECT-TYPE
+    SYNTAX      PrvtRapsRoleType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The role of the node inside this sub-ring.
+         Must perform shutdown to change this object."
+    ::= { prvtRapsInstSubRingEntry 4 }
+
+prvtRapsInstSubRingVirtChanVlan OBJECT-TYPE
+    SYNTAX      PrvtRapsVlanIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configures the virtual channel VLAN for this sub-ring.
+         Only applicable when main ring's control protocol is raps (prvtRapsInstControlProtocol equals 'raps').
+         Must be a VLAN from the prvtRapsInstMonVlanTable.
+         No two sub-rings can use the same VLAN for the virtual channel VLAN."
+    ::= { prvtRapsInstSubRingEntry 5 }
+
+prvtRapsInstSubRingRevertiveMode OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to select revertive behavior for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 6 }
+
+prvtRapsInstSubRingHoldOffTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsHoldOffType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The hold-off timer time-out value for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 7 }
+
+prvtRapsInstSubRingWaitTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsWaitTimerType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The wait-to-restore timer time-out value for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 8 }
+
+prvtRapsInstSubRingGuardTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsGuardTimerType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The guard timer time-out value for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 9 }
+
+prvtRapsInstSubRingBlockTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsBlockTimerType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The wait to block timer time-out value for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 10 }
+
+prvtRapsInstSubRingPropTopChng OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable topology change propagation for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 11 }
+
+prvtRapsInstSubRingShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to de-activate this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 12 }
+
+prvtRapsInstSubRingClear OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Clear command to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 13 }
+
+prvtRapsInstSubRingManualSwitch OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Manual Switch command to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 14 }
+
+prvtRapsInstSubRingForcedSwitch OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Forced Switch command to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 15 }
+
+prvtRapsInstSubRingOperStatus OBJECT-TYPE
+    SYNTAX      PrvtRapsInstStatusType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational status of this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 16 }
+
+prvtRapsInstSubRingRapsState OBJECT-TYPE
+    SYNTAX      PrvtRapsStatesType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current state of this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 17 }
+
+prvtRapsInstSubRingTopPriCmd OBJECT-TYPE
+    SYNTAX      PrvtRapsTopPriCmdType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The received Top Priority Request and Status value for this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 18 }
+
+prvtRapsInstSubRingPortName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The textual name of the port belonging to this sub-ring.
+         For a physical port, the format is U/S/P.
+         For a LAG interface, the format is agX."
+    ::= { prvtRapsInstSubRingEntry 19 }
+
+prvtRapsInstSubRingLinkStatus OBJECT-TYPE
+    SYNTAX      PrvtRapsLinkOperStatusType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational status of the port belonging to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 20 }
+
+prvtRapsInstSubRingRcvdNodeId OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote R-APS device connected to the port belonging to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 21 }
+
+prvtRapsInstSubRingRcvdCmd OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedCommandType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The command received on the port belonging to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 22 }
+
+prvtRapsInstSubRingRcvdInfo OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedInfoType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The info received on the port belonging to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 23 }
+
+prvtRapsInstSubRingDescription OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RAPS instance sub-ring description."
+    ::= { prvtRapsInstSubRingEntry 24 }
+
+prvtRapsInstSubRingVcRcvdNodeId OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote R-APS device connected through the virtual channel."
+    ::= { prvtRapsInstSubRingEntry 25 }
+
+prvtRapsInstSubRingVcRcvdCmd OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedCommandType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The command received through the virtual channel belonging to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 26 }
+
+prvtRapsInstSubRingVcRcvdInfo OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedInfoType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The info received through the virtual channel belonging to this sub-ring."
+    ::= { prvtRapsInstSubRingEntry 27 }
+
+prvtRapsInstSubRingVirtChanSvc OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967294)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure the virtual channel service for this sub-ring.
+         Only applicable when main ring's control protocol is vpls (prvtRapsInstControlProtocol equals 'vpls').
+         Must be a service ID from PRVT-SERV-MIB::serviceId.
+         No two sub-rings can use the same service ID for the virtual channel service."
+    ::= { prvtRapsInstSubRingEntry 28 }
+
+prvtRapsInstSubRingControlVlan OBJECT-TYPE
+    SYNTAX      PrvtRapsVlanIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The control VLAN for this sub-ring.
+         This object must be set to the ID of an existing VLAN.
+         Must not be the same VLAN as a monitored VLAN in any instance.
+         Must perform shutdown to change this object."
+    ::= { prvtRapsInstSubRingEntry 29 }
+
+prvtRapsInstSubRingPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsInstSubRingPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Sub-ring port Table
+         An entry in this table defines a physical port belonging to a sub-ring.
+         Exactly one interface must be defined per sub-ring. This includes physical
+         ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined
+         in prvtRapsInstSubRingLagTable).
+         A sub-ring port can not be part of the main ring."
+    ::= { prvtRapsMIBObjects 7 }
+
+prvtRapsInstSubRingPortEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsInstSubRingPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstSubRingPortTable."
+    INDEX       { prvtRapsInstIndex, prvtRapsInstSubRingIndex, ifIndex }
+    ::= { prvtRapsInstSubRingPortTable 1 }
+
+PrvtRapsInstSubRingPortEntry ::= SEQUENCE {
+    prvtRapsInstSubRingPortRowStatus            RowStatus,
+    prvtRapsInstSubRingPortMep                  PrvtRapsMepIdType,
+    prvtRapsInstSubRingPortRpl                  TruthValue,
+    prvtRapsInstSubRingPortMonitoringMethod     PrvtRapsMonitoringMethodType
+}
+
+prvtRapsInstSubRingPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this sub-ring port."
+    ::= { prvtRapsInstSubRingPortEntry 1 }
+
+prvtRapsInstSubRingPortMep OBJECT-TYPE
+    SYNTAX      PrvtRapsMepIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peer maintenance entity group end point ID that should monitor this sub-ring port.
+         A sub-ring MEP can not be used in another ring."
+    ::= { prvtRapsInstSubRingPortEntry 2 }
+
+prvtRapsInstSubRingPortRpl OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to define this sub-ring port as a Ring Protection Link port.
+         Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole)
+         is not 'simpleNode'.
+         In 'simpleNode' role, no RPL ports must be defined."
+    ::= { prvtRapsInstSubRingPortEntry 3 }
+
+prvtRapsInstSubRingPortMonitoringMethod OBJECT-TYPE
+    SYNTAX      PrvtRapsMonitoringMethodType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Ethernet ring protection monitoring methods"
+    ::= { prvtRapsInstSubRingPortEntry 4 }
+
+prvtRapsInstSubRingLagTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsInstSubRingLagEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Sub-ring LAG interface Table
+         An entry in this table defines a LAG interface belonging to a sub-ring.
+         Exactly one interface must be defined per sub-ring. This includes physical
+         ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined
+         in prvtRapsInstSubRingLagTable)."
+    ::= { prvtRapsMIBObjects 8 }
+
+prvtRapsInstSubRingLagEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsInstSubRingLagEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstSubRingLagTable."
+    INDEX       { prvtRapsInstIndex, prvtRapsInstSubRingIndex, 
+                  prvtRapsInstSubRingLagId }
+    ::= { prvtRapsInstSubRingLagTable 1 }
+
+PrvtRapsInstSubRingLagEntry ::= SEQUENCE {
+    prvtRapsInstSubRingLagId                PrvtRapsLinkAggIdType,
+    prvtRapsInstSubRingLagRowStatus         RowStatus,
+    prvtRapsInstSubRingLagMep               PrvtRapsMepIdType,
+    prvtRapsInstSubRingLagRpl               TruthValue,
+    prvtRapsInstSubRingLagMonitoringMethod  PrvtRapsMonitoringMethodType
+}
+
+prvtRapsInstSubRingLagId OBJECT-TYPE
+    SYNTAX      PrvtRapsLinkAggIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a LAG interface belonging to a sub-ring.
+         Must be set to the LAG ID of an existing LAG interface.
+         A sub-ring LAG port can not be part of the main ring."
+    ::= { prvtRapsInstSubRingLagEntry 1 }
+
+prvtRapsInstSubRingLagRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this sub-ring LAG interface."
+    ::= { prvtRapsInstSubRingLagEntry 2 }
+
+prvtRapsInstSubRingLagMep OBJECT-TYPE
+    SYNTAX      PrvtRapsMepIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peer maintenance entity group end point ID that should monitor this sub-ring LAG interface.
+         A sub-ring MEP can not be used in another ring."
+    ::= { prvtRapsInstSubRingLagEntry 3 }
+
+prvtRapsInstSubRingLagRpl OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to define this sub-ring LAG port as a Ring Protection Link port.
+         Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole)
+         is not 'simpleNode'.
+         In 'simpleNode' role, no RPL ports must be defined."
+    ::= { prvtRapsInstSubRingLagEntry 4 }
+
+prvtRapsInstSubRingLagMonitoringMethod OBJECT-TYPE
+    SYNTAX      PrvtRapsMonitoringMethodType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Ethernet ring protection monitoring methods"
+    ::= { prvtRapsInstSubRingLagEntry 5 }
+
+prvtRapsDefectAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRapsInstOperStatus, prvtRapsInstControlVlan }
+    STATUS      current
+    DESCRIPTION 
+        "This trap will be sent by any instance when it notices a defect.
+         So far only the situation when two or more RPL-owners are defined
+         in the ring is identified as a defect. This scenario is noticed when
+         the instance with the RPL-Owner role receives a RAPS packet with the
+         RB bit set in its status field from a different NodeID than its own.
+         The management entity receiving the notification can identify
+         the system from the network source address of the
+         notification."
+    ::= { prvtRapsMIBNotifications 1 }
+
+prvtRapsSwitchoverAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRapsInstRapsState, prvtRapsInstControlVlan }
+    STATUS      current
+    DESCRIPTION 
+        "This trap will be sent by any instance when it changes state.
+         The management entity receiving the notification can identify
+         the system from the network source address of the
+         notification"
+    ::= { prvtRapsMIBNotifications 2 }
+
+prvtRapsInstSubRingDefectAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRapsInstSubRingOperStatus, 
+                  prvtRapsInstSubRingControlVlan }
+    STATUS      current
+    DESCRIPTION 
+        "This trap will be sent by any subring instance when it notices a defect.
+         So far only the situation when two or more RPL-owners are defined
+         in the ring is identified as a defect. This scenario is noticed when
+         the instance with the RPL-Owner role receives a RAPS packet with the
+         RB bit set in its status field from a different NodeID than its own.
+         The management entity receiving the notification can identify
+         the system from the network source address of the
+         notification, and can identify the instance reporting the change
+         by the indices in the OID of the prvtRapsInstSubRingOperStatus
+         variable in the notification."
+    ::= { prvtRapsMIBNotifications 3 }
+
+prvtRapsInstSubRingSwitchoverAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRapsInstSubRingRapsState, 
+                  prvtRapsInstSubRingControlVlan }
+    STATUS      current
+    DESCRIPTION 
+        "This trap will be sent by any subring instance when it changes state.
+         The management entity receiving the notification can identify
+         the system from the network source address of the
+         notification, and can identify the instance reporting the change
+         by the indices in the OID of the prvtRapsInstSubRingRapsState
+         variable in the notification."
+    ::= { prvtRapsMIBNotifications 4 }
+
+END -- end of module PRVT-RAPS-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-RAPS-SVC-MIB b/MIBS/telco-systems/binox/PRVT-RAPS-SVC-MIB
new file mode 100644
index 0000000..c1abebc
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-RAPS-SVC-MIB
@@ -0,0 +1,598 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-RAPS-SVC-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-RAPS-SVC-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    PrvtRapsActionType, PrvtRapsBlockTimerType, PrvtRapsCfmLevelType, 
+    PrvtRapsGuardTimerType, PrvtRapsHoldOffType, PrvtRapsInstIndexType, 
+    PrvtRapsInstStatusType, PrvtRapsLinkAggIdType, 
+    PrvtRapsLinkOperStatusType, PrvtRapsMepIdType, 
+    PrvtRapsMonitoringMethodType, PrvtRapsReceivedCommandType, 
+    PrvtRapsReceivedInfoType, PrvtRapsRingIdType, PrvtRapsRoleType, 
+    PrvtRapsStatesType, PrvtRapsTopPriCmdType, PrvtRapsVlanIdType, 
+    PrvtRapsWaitTimerType
+        FROM PRVT-RAPS-MIB
+    serviceAccessSwitch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    DisplayString, MacAddress, RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtRapsSvcMIB MODULE-IDENTITY
+    LAST-UPDATED "201103020000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The SNMP MIB module for Ring Automatic Protection Switching with Service Support (G.8032)."
+    REVISION    "201103020000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { serviceAccessSwitch 6 }
+
+
+prvtRapsSvcMIBNotifications OBJECT IDENTIFIER
+    ::= { prvtRapsSvcMIB 0 }
+
+prvtRapsSvcMIBObjects OBJECT IDENTIFIER
+    ::= { prvtRapsSvcMIB 1 }
+
+prvtRapsSvcInstTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsSvcInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance table.
+         Each entry in this table defines an instance of a Ring APS."
+    ::= { prvtRapsSvcMIBObjects 1 }
+
+prvtRapsSvcInstEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsSvcInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsSvcInstTable."
+    INDEX       { prvtRapsSvcInstIndex }
+    ::= { prvtRapsSvcInstTable 1 }
+
+PrvtRapsSvcInstEntry ::= SEQUENCE {
+    prvtRapsSvcInstIndex            PrvtRapsInstIndexType,
+    prvtRapsSvcInstRowStatus        RowStatus,
+    prvtRapsSvcInstCfmDomainLevel   PrvtRapsCfmLevelType,
+    prvtRapsSvcInstDescription      DisplayString
+}
+
+prvtRapsSvcInstIndex OBJECT-TYPE
+    SYNTAX      PrvtRapsInstIndexType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary index uniquely identifying a Ring APS instance."
+    ::= { prvtRapsSvcInstEntry 1 }
+
+prvtRapsSvcInstRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this R-APS instance."
+    ::= { prvtRapsSvcInstEntry 2 }
+
+prvtRapsSvcInstCfmDomainLevel OBJECT-TYPE
+    SYNTAX      PrvtRapsCfmLevelType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The CFM domain level for this R-APS instance.
+         Must perform shutdown to change this object."
+    ::= { prvtRapsSvcInstEntry 3 }
+
+prvtRapsSvcInstDescription OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RAPS instance description."
+    ::= { prvtRapsSvcInstEntry 4 }
+
+prvtRapsSvcInstSubRingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsSvcInstSubRingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Sub-ring Table
+         Each entry in this table defines a sub-ring belonging to a R-APS instance.
+         Sub-rings are not available in version 1 mode."
+    ::= { prvtRapsSvcMIBObjects 2 }
+
+prvtRapsSvcInstSubRingEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsSvcInstSubRingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsSvcInstSubRingTable."
+    INDEX       { prvtRapsSvcInstIndex, prvtRapsSvcInstSubRingIndex }
+    ::= { prvtRapsSvcInstSubRingTable 1 }
+
+PrvtRapsSvcInstSubRingEntry ::= SEQUENCE {
+    prvtRapsSvcInstSubRingIndex             PrvtRapsInstIndexType,
+    prvtRapsSvcInstSubRingRowStatus         RowStatus,
+    prvtRapsSvcInstSubRingId                PrvtRapsRingIdType,
+    prvtRapsSvcInstSubRingRole              PrvtRapsRoleType,
+    prvtRapsSvcInstSubRingVirtChanService   Unsigned32,
+    prvtRapsSvcInstSubRingRevertiveMode     TruthValue,
+    prvtRapsSvcInstSubRingHoldOffTimer      PrvtRapsHoldOffType,
+    prvtRapsSvcInstSubRingWaitTimer         PrvtRapsWaitTimerType,
+    prvtRapsSvcInstSubRingGuardTimer        PrvtRapsGuardTimerType,
+    prvtRapsSvcInstSubRingBlockTimer        PrvtRapsBlockTimerType,
+    prvtRapsSvcInstSubRingPropTopChng       TruthValue,
+    prvtRapsSvcInstSubRingShutdown          TruthValue,
+    prvtRapsSvcInstSubRingClear             PrvtRapsActionType,
+    prvtRapsSvcInstSubRingManualSwitch      PrvtRapsActionType,
+    prvtRapsSvcInstSubRingForcedSwitch      PrvtRapsActionType,
+    prvtRapsSvcInstSubRingOperStatus        PrvtRapsInstStatusType,
+    prvtRapsSvcInstSubRingRapsState         PrvtRapsStatesType,
+    prvtRapsSvcInstSubRingTopPriCmd         PrvtRapsTopPriCmdType,
+    prvtRapsSvcInstSubRingPortName          OCTET STRING,
+    prvtRapsSvcInstSubRingLinkStatus        PrvtRapsLinkOperStatusType,
+    prvtRapsSvcInstSubRingRcvdNodeId        MacAddress,
+    prvtRapsSvcInstSubRingRcvdCmd           PrvtRapsReceivedCommandType,
+    prvtRapsSvcInstSubRingRcvdInfo          PrvtRapsReceivedInfoType,
+    prvtRapsSvcInstSubRingDescription       DisplayString,
+    prvtRapsSvcInstSubRingVcRcvdNodeId      MacAddress,
+    prvtRapsSvcInstSubRingVcRcvdCmd         PrvtRapsReceivedCommandType,
+    prvtRapsSvcInstSubRingVcRcvdInfo        PrvtRapsReceivedInfoType,
+    prvtRapsSvcInstSubRingControlVlan       PrvtRapsVlanIdType
+}
+
+prvtRapsSvcInstSubRingIndex OBJECT-TYPE
+    SYNTAX      PrvtRapsInstIndexType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary index uniquely identifying a sub-ring for this R-APS instance."
+    ::= { prvtRapsSvcInstSubRingEntry 1 }
+
+prvtRapsSvcInstSubRingRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 2 }
+
+prvtRapsSvcInstSubRingId OBJECT-TYPE
+    SYNTAX      PrvtRapsRingIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ring ID for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 3 }
+
+prvtRapsSvcInstSubRingRole OBJECT-TYPE
+    SYNTAX      PrvtRapsRoleType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The role of the node inside this sub-ring.
+         Must perform shutdown to change this object."
+    ::= { prvtRapsSvcInstSubRingEntry 4 }
+
+prvtRapsSvcInstSubRingVirtChanService OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967294)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configures the virtual channel VLAN for this sub-ring.
+         Must be a VLAN from the prvtRapsInstMonVlanTable.
+         No two sub-rings can use the same VLAN for the virtual channel VLAN."
+    ::= { prvtRapsSvcInstSubRingEntry 5 }
+
+prvtRapsSvcInstSubRingRevertiveMode OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to select revertive behavior for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 6 }
+
+prvtRapsSvcInstSubRingHoldOffTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsHoldOffType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The hold-off timer time-out value for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 7 }
+
+prvtRapsSvcInstSubRingWaitTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsWaitTimerType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The wait-to-restore timer time-out value for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 8 }
+
+prvtRapsSvcInstSubRingGuardTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsGuardTimerType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The guard timer time-out value for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 9 }
+
+prvtRapsSvcInstSubRingBlockTimer OBJECT-TYPE
+    SYNTAX      PrvtRapsBlockTimerType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The wait to block timer time-out value for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 10 }
+
+prvtRapsSvcInstSubRingPropTopChng OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable topology change propagation for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 11 }
+
+prvtRapsSvcInstSubRingShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to de-activate this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 12 }
+
+prvtRapsSvcInstSubRingClear OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Clear command to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 13 }
+
+prvtRapsSvcInstSubRingManualSwitch OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Manual Switch command to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 14 }
+
+prvtRapsSvcInstSubRingForcedSwitch OBJECT-TYPE
+    SYNTAX      PrvtRapsActionType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Send the Forced Switch command to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 15 }
+
+prvtRapsSvcInstSubRingOperStatus OBJECT-TYPE
+    SYNTAX      PrvtRapsInstStatusType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational status of this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 16 }
+
+prvtRapsSvcInstSubRingRapsState OBJECT-TYPE
+    SYNTAX      PrvtRapsStatesType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current state of this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 17 }
+
+prvtRapsSvcInstSubRingTopPriCmd OBJECT-TYPE
+    SYNTAX      PrvtRapsTopPriCmdType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The received Top Priority Request and Status value for this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 18 }
+
+prvtRapsSvcInstSubRingPortName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The textual name of the port belonging to this sub-ring.
+         For a physical port, the format is U/S/P.
+         For a LAG interface, the format is agX."
+    ::= { prvtRapsSvcInstSubRingEntry 19 }
+
+prvtRapsSvcInstSubRingLinkStatus OBJECT-TYPE
+    SYNTAX      PrvtRapsLinkOperStatusType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operational status of the port belonging to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 20 }
+
+prvtRapsSvcInstSubRingRcvdNodeId OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote R-APS device connected to the port belonging to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 21 }
+
+prvtRapsSvcInstSubRingRcvdCmd OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedCommandType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The command received on the port belonging to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 22 }
+
+prvtRapsSvcInstSubRingRcvdInfo OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedInfoType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The info received on the port belonging to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 23 }
+
+prvtRapsSvcInstSubRingDescription OBJECT-TYPE
+    SYNTAX      DisplayString (SIZE(0..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RAPS instance sub-ring description."
+    ::= { prvtRapsSvcInstSubRingEntry 24 }
+
+prvtRapsSvcInstSubRingVcRcvdNodeId OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote R-APS device connected through the virtual channel."
+    ::= { prvtRapsSvcInstSubRingEntry 25 }
+
+prvtRapsSvcInstSubRingVcRcvdCmd OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedCommandType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The command received through the virtual channel belonging to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 26 }
+
+prvtRapsSvcInstSubRingVcRcvdInfo OBJECT-TYPE
+    SYNTAX      PrvtRapsReceivedInfoType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The info received through the virtual channel belonging to this sub-ring."
+    ::= { prvtRapsSvcInstSubRingEntry 27 }
+
+prvtRapsSvcInstSubRingControlVlan OBJECT-TYPE
+    SYNTAX      PrvtRapsVlanIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The control VLAN for this R-APS sub-ring instance.
+         This object must be set to the ID of an existing VLAN.
+         Each R-APS sub-ring instance must use a unique VLAN for the control VLAN.
+         Must perform shutdown to change this object."
+    ::= { prvtRapsSvcInstSubRingEntry 28 }
+
+prvtRapsSvcInstSubRingPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsSvcInstSubRingPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Sub-ring port Table
+         An entry in this table defines a physical port belonging to a sub-ring.
+         Exactly one interface must be defined per sub-ring. This includes physical
+         ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined
+         in prvtRapsInstSubRingLagTable).
+         A sub-ring port can not be part of the main ring."
+    ::= { prvtRapsSvcMIBObjects 3 }
+
+prvtRapsSvcInstSubRingPortEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsSvcInstSubRingPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstSubRingPortTable."
+    INDEX       { prvtRapsSvcInstIndex, prvtRapsSvcInstSubRingIndex, 
+                  ifIndex }
+    ::= { prvtRapsSvcInstSubRingPortTable 1 }
+
+PrvtRapsSvcInstSubRingPortEntry ::= SEQUENCE {
+    prvtRapsSvcInstSubRingPortRowStatus         RowStatus,
+    prvtRapsSvcInstSubRingPortMep               PrvtRapsMepIdType,
+    prvtRapsSvcInstSubRingPortRpl               TruthValue,
+    prvtRapsSvcInstSubRingPortMonitoringMethod  PrvtRapsMonitoringMethodType
+}
+
+prvtRapsSvcInstSubRingPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this sub-ring port."
+    ::= { prvtRapsSvcInstSubRingPortEntry 1 }
+
+prvtRapsSvcInstSubRingPortMep OBJECT-TYPE
+    SYNTAX      PrvtRapsMepIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peer maintenance entity group end point ID that should monitor this sub-ring port.
+         A sub-ring MEP can not be used in another ring."
+    ::= { prvtRapsSvcInstSubRingPortEntry 2 }
+
+prvtRapsSvcInstSubRingPortRpl OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to define this sub-ring port as a Ring Protection Link port.
+         Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole)
+         is not 'simpleNode'.
+         In 'simpleNode' role, no RPL ports must be defined."
+    ::= { prvtRapsSvcInstSubRingPortEntry 3 }
+
+prvtRapsSvcInstSubRingPortMonitoringMethod OBJECT-TYPE
+    SYNTAX      PrvtRapsMonitoringMethodType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Ethernet ring protection monitoring methods"
+    ::= { prvtRapsSvcInstSubRingPortEntry 4 }
+
+prvtRapsSvcInstSubRingLagTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRapsSvcInstSubRingLagEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "R-APS Instance Sub-ring LAG interface Table
+         An entry in this table defines a LAG interface belonging to a sub-ring.
+         Exactly one interface must be defined per sub-ring. This includes physical
+         ports (defined in prvtRapsInstSubRingPortTable) and LAG interfaces (defined
+         in prvtRapsInstSubRingLagTable)."
+    ::= { prvtRapsSvcMIBObjects 4 }
+
+prvtRapsSvcInstSubRingLagEntry OBJECT-TYPE
+    SYNTAX      PrvtRapsSvcInstSubRingLagEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtRapsInstSubRingLagTable."
+    INDEX       { prvtRapsSvcInstIndex, prvtRapsSvcInstSubRingIndex, 
+                  prvtRapsSvcInstSubRingLagId }
+    ::= { prvtRapsSvcInstSubRingLagTable 1 }
+
+PrvtRapsSvcInstSubRingLagEntry ::= SEQUENCE {
+    prvtRapsSvcInstSubRingLagId                 PrvtRapsLinkAggIdType,
+    prvtRapsSvcInstSubRingLagRowStatus          RowStatus,
+    prvtRapsSvcInstSubRingLagMep                PrvtRapsMepIdType,
+    prvtRapsSvcInstSubRingLagRpl                TruthValue,
+    prvtRapsSvcInstSubRingLagMonitoringMethod   PrvtRapsMonitoringMethodType
+}
+
+prvtRapsSvcInstSubRingLagId OBJECT-TYPE
+    SYNTAX      PrvtRapsLinkAggIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a LAG interface belonging to a sub-ring.
+         Must be set to the LAG ID of an existing LAG interface.
+         A sub-ring LAG port can not be part of the main ring."
+    ::= { prvtRapsSvcInstSubRingLagEntry 1 }
+
+prvtRapsSvcInstSubRingLagRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this sub-ring LAG interface."
+    ::= { prvtRapsSvcInstSubRingLagEntry 2 }
+
+prvtRapsSvcInstSubRingLagMep OBJECT-TYPE
+    SYNTAX      PrvtRapsMepIdType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The peer maintenance entity group end point ID that should monitor this sub-ring LAG interface.
+         A sub-ring MEP can not be used in another ring."
+    ::= { prvtRapsSvcInstSubRingLagEntry 3 }
+
+prvtRapsSvcInstSubRingLagRpl OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to define this sub-ring LAG port as a Ring Protection Link port.
+         Exactly one RPL port must be defined when sub-ring role (prvtRapsInstSubRingRole)
+         is not 'simpleNode'.
+         In 'simpleNode' role, no RPL ports must be defined."
+    ::= { prvtRapsSvcInstSubRingLagEntry 4 }
+
+prvtRapsSvcInstSubRingLagMonitoringMethod OBJECT-TYPE
+    SYNTAX      PrvtRapsMonitoringMethodType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Ethernet ring protection monitoring methods"
+    ::= { prvtRapsSvcInstSubRingLagEntry 5 }
+
+prvtRapsSvcInstSubRingDefectAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRapsSvcInstSubRingOperStatus, 
+                  prvtRapsSvcInstSubRingControlVlan }
+    STATUS      current
+    DESCRIPTION 
+        "This trap will be sent by any subring instance when it notices a defect.
+         So far only the situation when two or more RPL-owners are defined
+         in the ring is identified as a defect. This scenario is noticed when
+         the instance with the RPL-Owner role receives a RAPS packet with the
+         RB bit set in its status field from a different NodeID than its own.
+         The management entity receiving the notification can identify
+         the system from the network source address of the
+         notification, and can identify the instance reporting the change
+         by the indices in the OID of the prvtRapsInstSubRingOperStatus
+         variable in the notification."
+    ::= { prvtRapsSvcMIBNotifications 1 }
+
+prvtRapsSvcInstSubRingSwitchoverAlarm NOTIFICATION-TYPE
+    OBJECTS     { prvtRapsSvcInstSubRingRapsState, 
+                  prvtRapsSvcInstSubRingControlVlan }
+    STATUS      current
+    DESCRIPTION 
+        "This trap will be sent by any subring instance when it changes state.
+         The management entity receiving the notification can identify
+         the system from the network source address of the
+         notification, and can identify the instance reporting the change
+         by the indices in the OID of the prvtRapsInstSubRingRapsState
+         variable in the notification."
+    ::= { prvtRapsSvcMIBNotifications 2 }
+
+END -- end of module PRVT-RAPS-SVC-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-REDUNDANCY-MIB b/MIBS/telco-systems/binox/PRVT-REDUNDANCY-MIB
new file mode 100644
index 0000000..f9ee94f
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-REDUNDANCY-MIB
@@ -0,0 +1,150 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-REDUNDANCY-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-REDUNDANCY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    software
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI;
+
+prvtRedundancyMIB MODULE-IDENTITY
+    LAST-UPDATED "201312170000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Monitoring of components redundancy protection"
+    REVISION    "201312170000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { software 5 }
+
+
+prvtRedundancyNotifications OBJECT IDENTIFIER
+    ::= { prvtRedundancyMIB 0 }
+
+prvtRedundancyObjects OBJECT IDENTIFIER
+    ::= { prvtRedundancyMIB 1 }
+
+prvtRedundancyChassisTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRedundancyChassisEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of slots in the chassis"
+    ::= { prvtRedundancyObjects 1 }
+
+prvtRedundancyChassisEntry OBJECT-TYPE
+    SYNTAX      PrvtRedundancyChassisEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtRedundancyChassisTable"
+    INDEX       { prvtRedundancyChassisSlotId }
+    ::= { prvtRedundancyChassisTable 1 }
+
+PrvtRedundancyChassisEntry ::= SEQUENCE {
+    prvtRedundancyChassisSlotId         Unsigned32,
+    prvtRedundancyChassisLICType        INTEGER,
+    prvtRedundancyChassisStatus         INTEGER,
+    prvtRedundancyChassisEntryStatus    INTEGER
+}
+
+prvtRedundancyChassisSlotId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index in the table."
+    ::= { prvtRedundancyChassisEntry 1 }
+
+prvtRedundancyChassisLICType OBJECT-TYPE
+    SYNTAX      INTEGER { lc-unknown(1), lc-8020-10GE(3), lc-8064-1GE(4), 
+                    lc-8032-1GE(19), lc-8062-1GE(20) }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        "LIC type"
+    ::= { prvtRedundancyChassisEntry 2 }
+
+prvtRedundancyChassisStatus OBJECT-TYPE
+    SYNTAX      INTEGER { protected(0), notProtected(1) }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        "Chassis status"
+    ::= { prvtRedundancyChassisEntry 3 }
+
+prvtRedundancyChassisEntryStatus OBJECT-TYPE
+    SYNTAX      INTEGER { extracted(0), inserted(1) }
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        "Chassis Entry status"
+    ::= { prvtRedundancyChassisEntry 4 }
+
+licStatus NOTIFICATION-TYPE
+    OBJECTS     { prvtRedundancyChassisEntryStatus }
+    STATUS      current
+    DESCRIPTION 
+        "LIC  prvtRedundancyChassisEntryStatus has been changed.
+         Card slotId is present as a key."
+    ::= { prvtRedundancyNotifications 1 }
+
+switchover NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "Switchover has happend - link between Active and Standby HUB is broken."
+    ::= { prvtRedundancyNotifications 2 }
+
+redundancyStatus NOTIFICATION-TYPE
+    OBJECTS     { prvtRedundancyChassisStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Chassis redundancy-status"
+    ::= { prvtRedundancyNotifications 3 }
+
+END -- end of module PRVT-REDUNDANCY-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-RESILIENT-LINK-MIB b/MIBS/telco-systems/binox/PRVT-RESILIENT-LINK-MIB
new file mode 100644
index 0000000..db0a038
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-RESILIENT-LINK-MIB
@@ -0,0 +1,173 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-RESILIENT-LINK-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-RESILIENT-LINK-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex, InterfaceIndexOrZero
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtResilientLinkMIB MODULE-IDENTITY
+    LAST-UPDATED "201005170000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The Resilient Link MIB module for managing switch or ipSwitch
+         resilient link"
+    REVISION    "201005170000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 4 }
+
+
+prvtResilientLinkNotifications OBJECT IDENTIFIER
+    ::= { prvtResilientLinkMIB 0 }
+
+prvtResilientLinkObjects OBJECT IDENTIFIER
+    ::= { prvtResilientLinkMIB 1 }
+
+prvtResilientLinkTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtResilientLinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains config and status information for resilient links."
+    ::= { prvtResilientLinkObjects 1 }
+
+prvtResilientLinkEntry OBJECT-TYPE
+    SYNTAX      PrvtResilientLinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtResilientLinkTable."
+    INDEX       { prvtResilientLinkIndex }
+    ::= { prvtResilientLinkTable 1 }
+
+PrvtResilientLinkEntry ::= SEQUENCE {
+    prvtResilientLinkIndex          Integer32,
+    prvtResilientLinkRowStatus      RowStatus,
+    prvtResilientLinkPrimaryPort    InterfaceIndex,
+    prvtResilientLinkBackupPort     InterfaceIndex,
+    prvtResilientLinkBackupMode     INTEGER,
+    prvtResilientLinkStatusActive   InterfaceIndexOrZero,
+    prvtResilientLinkStatusSwaps    Unsigned32
+}
+
+prvtResilientLinkIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..256)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This object uniquely identifies the resilient link."
+    ::= { prvtResilientLinkEntry 1 }
+
+prvtResilientLinkRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus for prvtResilientLinkTable."
+    ::= { prvtResilientLinkEntry 2 }
+
+prvtResilientLinkPrimaryPort OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The primary port for the resilient link."
+    ::= { prvtResilientLinkEntry 3 }
+
+prvtResilientLinkBackupPort OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The back-up port for the resilient link."
+    ::= { prvtResilientLinkEntry 4 }
+
+prvtResilientLinkBackupMode OBJECT-TYPE
+    SYNTAX      INTEGER { standby(1), shutdown(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configures the behavior of the back-up link."
+    ::= { prvtResilientLinkEntry 5 }
+
+prvtResilientLinkStatusActive OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The currently selected active port.
+         A value of zero indicates that neither port has yet been selected as the active port."
+    ::= { prvtResilientLinkEntry 7 }
+
+prvtResilientLinkStatusSwaps OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of times the resilient link's ports have swapped states.
+         (i.e. the number of times that prvtResilientLinkStatusActive has changed."
+    ::= { prvtResilientLinkEntry 8 }
+
+prvtResilientLinkStatusChange NOTIFICATION-TYPE
+    OBJECTS     { prvtResilientLinkPrimaryPort, 
+                  prvtResilientLinkBackupPort }
+    STATUS      current
+    DESCRIPTION 
+        "The resilientLinkStatusChange trap indicates that 
+         the sending agent monitor detected a change in the status of the
+         resilient link, identified by resilientLinkIndex."
+    ::= { prvtResilientLinkNotifications 1 }
+
+END -- end of module PRVT-RESILIENT-LINK-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-ROUTE-MIB b/MIBS/telco-systems/binox/PRVT-ROUTE-MIB
new file mode 100644
index 0000000..2186748
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-ROUTE-MIB
@@ -0,0 +1,369 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-ROUTE-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-ROUTE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    Ipv6Address
+        FROM IPV6-TC
+    routingProtocols
+        FROM PRVT-SWITCH-MIB
+    IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtRouteMIB MODULE-IDENTITY
+    LAST-UPDATED "200901270000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Mib containing information about
+         dynamic and configurable routes in the system."
+    REVISION    "200901270000Z"
+    DESCRIPTION 
+        "Initial version"
+    ::= { routingProtocols 3 }
+
+
+NetPrefix ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d/1d"
+    STATUS      current
+    DESCRIPTION 
+        "Prefix"
+    SYNTAX      OCTET STRING
+
+prvtRouteMIBObjects OBJECT IDENTIFIER
+    ::= { prvtRouteMIB 1 }
+
+prvtDynamicRouteTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtDynamicRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "System dynamic routes."
+    ::= { prvtRouteMIBObjects 1 }
+
+prvtDynamicRouteEntry OBJECT-TYPE
+    SYNTAX      PrvtDynamicRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The conceptual row represents a routing entry."
+    INDEX       { prvtDynamicRoutePrefix, prvtDynamicRouteNextHop, 
+                  prvtDynamicRouteType, prvtDynamicRouteDistance }
+    ::= { prvtDynamicRouteTable 1 }
+
+PrvtDynamicRouteEntry ::= SEQUENCE {
+    prvtDynamicRoutePrefix          OCTET STRING,
+    prvtDynamicRouteNextHop         IpAddress,
+    prvtDynamicRouteType            INTEGER,
+    prvtDynamicRouteDistance        Unsigned32,
+    prvtDynamicRouteFlags           BITS,
+    prvtDynamicRouteNextHopType     INTEGER,
+    prvtDynamicRouteNextHopFlags    BITS,
+    prvtDynamicRouteMetrics         Unsigned32,
+    prvtDynamicRouteUptime          OCTET STRING,
+    prvtDynamicRouteIfName          OCTET STRING
+}
+
+prvtDynamicRoutePrefix OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(5))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route prefix."
+    ::= { prvtDynamicRouteEntry 1 }
+
+prvtDynamicRouteNextHop OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route next hop."
+    ::= { prvtDynamicRouteEntry 2 }
+
+prvtDynamicRouteType OBJECT-TYPE
+    SYNTAX      INTEGER { system(1), kernel(2), connect(3), static(4), 
+                    rip(5), ripng(6), ospf(7), ospf6(8), bgp(9), fib(10), 
+                    vrrp(11), irdp(12), dhcp(13), pimd(14), isis1(15), 
+                    isis2(16), bfd(17), test(18), max(19) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route type."
+    ::= { prvtDynamicRouteEntry 3 }
+
+prvtDynamicRouteDistance OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route distance."
+    ::= { prvtDynamicRouteEntry 4 }
+
+prvtDynamicRouteFlags OBJECT-TYPE
+    SYNTAX      BITS { internal(0), selfroute(1), blackhole(2), ibgp(3), 
+                    selected(4), changed(5), static(6), deleted(7), 
+                    staticarp(8), mplsIngress(9), mplsEgress(10), 
+                    outband(11), selfIp(12), vrrpIp(13) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route flags."
+    ::= { prvtDynamicRouteEntry 5 }
+
+prvtDynamicRouteNextHopType OBJECT-TYPE
+    SYNTAX      INTEGER { ifindex(1), ifname(2), ipv4(3), ipv4Ifindex(4), 
+                    ipv4Ifname(5), ipv6(6), ipv6Ifindex(7), 
+                    ipv6Ifname(8) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route hop type."
+    ::= { prvtDynamicRouteEntry 6 }
+
+prvtDynamicRouteNextHopFlags OBJECT-TYPE
+    SYNTAX      BITS { active(0), fib(1), recursive(2), notready(3), 
+                    outband(4), fibsetOutband(5) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route hop flags."
+    ::= { prvtDynamicRouteEntry 7 }
+
+prvtDynamicRouteMetrics OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route metrics."
+    ::= { prvtDynamicRouteEntry 8 }
+
+prvtDynamicRouteUptime OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "A length of time.
+         
+         Duration values are in the ISO 8601 duration format, where
+         P represents 'Period',
+         nY represents the number of years,
+         nM the number of months,
+         nD the number of days,
+         T is the date/time separator,
+         nH the number of hours,
+         nM the number of minutes,
+         nS the number of seconds.
+         So P2DT23H32M51S means 'A period of 2 days, 23 hours, 32 minutes, and 51 seconds'.
+         
+         PnYnMnDTnH nMnS (e.g., P2DT23H32M51S)
+         
+         We use the duration data type to convey values like
+         the time left until a listing ends.
+         For ended listings, the time left is PT0S (zero seconds).
+         
+         xs:duration is part of the XML schema namespace defined as:
+         
+         xmlns:xs='http://www.w3.org/2001/XMLSchema' "
+    ::= { prvtDynamicRouteEntry 9 }
+
+prvtDynamicRouteIfName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Dynamic route name."
+    ::= { prvtDynamicRouteEntry 10 }
+
+prvtCfgRouteTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfgRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table with configurable routes. To create entry in
+         this table use prvtCfgRouteRowStatus with
+         createAndGo(4) or createAndWait(5).
+         For example static route :
+         static-route 88.65.85.4/32 43.13.15.18 3
+         will be represented as :
+         prvtCfgRouteRowStatus.88.65.85.4.32.43.13.15.18.3"
+    ::= { prvtRouteMIBObjects 2 }
+
+prvtCfgRouteEntry OBJECT-TYPE
+    SYNTAX      PrvtCfgRouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The conceptual row represents a routing entry."
+    INDEX       { prvtCfgRoutePrefix, prvtCfgRouteNextHop, 
+                  prvtCfgRouteDistance }
+    ::= { prvtCfgRouteTable 1 }
+
+PrvtCfgRouteEntry ::= SEQUENCE {
+    prvtCfgRoutePrefix      OCTET STRING,
+    prvtCfgRouteNextHop     IpAddress,
+    prvtCfgRouteDistance    Unsigned32,
+    prvtCfgRouteRowStatus   RowStatus
+}
+
+prvtCfgRoutePrefix OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(5))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Route prefix."
+    ::= { prvtCfgRouteEntry 1 }
+
+prvtCfgRouteNextHop OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Route next hop."
+    ::= { prvtCfgRouteEntry 2 }
+
+prvtCfgRouteDistance OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Route distance."
+    ::= { prvtCfgRouteEntry 3 }
+
+prvtCfgRouteRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Create static route."
+    ::= { prvtCfgRouteEntry 4 }
+
+prvtCfgIPv6RouteTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtCfgIPv6RouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table with configurable routes. To create entry in
+         this table use prvtCfgIPv6RouteRowStatus with
+         createAndGo(4) or createAndWait(5).
+         For example static route :
+         router static-ipv6-route ::/0 2001:fd8::7 10
+         will be represented as :
+         prvtCfgIPv6RouteRowStatus.4.58.58.47.48.32.1.15.216.0.0.0.0.0.0.0.0.0.0.0.7.10 
+         or
+         1.3.6.1.4.1.738.10.6.4.3.1.3.1.4 --> prvtCfgIPv6RouteRowStatus OID
+         v --> Value --> createAndGo(4) 
+         prvtCfgIPv6RouteRowStatus    <--|v  :  :  /  0 2001:0f  d8: 00: 00: 00: 00: 00: 07|10 
+         1.3.6.1.4.1.738.10.6.4.3.1.3.1.4.4.58.58.47.48.32.1.15.216.0.0.0.0.0.0.0.0.0.0.0.7.10"
+    ::= { prvtRouteMIBObjects 3 }
+
+prvtCfgIPv6RouteEntry OBJECT-TYPE
+    SYNTAX      PrvtCfgIPv6RouteEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The conceptual row represents a IPv6 routing entry."
+    INDEX       { prvtCfgIPv6RoutePrefix, prvtCfgIPv6RouteNextHop, 
+                  prvtCfgIPv6RouteDistance }
+    ::= { prvtCfgIPv6RouteTable 1 }
+
+PrvtCfgIPv6RouteEntry ::= SEQUENCE {
+    prvtCfgIPv6RoutePrefix      OCTET STRING,
+    prvtCfgIPv6RouteNextHop     Ipv6Address,
+    prvtCfgIPv6RouteDistance    Unsigned32,
+    prvtCfgIPv6RouteRowStatus   RowStatus
+}
+
+prvtCfgIPv6RoutePrefix OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "IPv6 route prefix."
+    ::= { prvtCfgIPv6RouteEntry 1 }
+
+prvtCfgIPv6RouteNextHop OBJECT-TYPE
+    SYNTAX      Ipv6Address
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "IPv6 route next hop."
+    ::= { prvtCfgIPv6RouteEntry 2 }
+
+prvtCfgIPv6RouteDistance OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "IPv6 route distance."
+    ::= { prvtCfgIPv6RouteEntry 3 }
+
+prvtCfgIPv6RouteRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Create static IPv6 route."
+    ::= { prvtCfgIPv6RouteEntry 4 }
+
+prvtGlobalIPv6Forwarding OBJECT-TYPE
+    SYNTAX      INTEGER { host(1), router(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Configure IPv6 behavior."
+    ::= { prvtRouteMIBObjects 4 }
+
+prvtGlobalIPv6Disable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Configure IPv6 behavior."
+    ::= { prvtRouteMIBObjects 5 }
+
+END -- end of module PRVT-ROUTE-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-RSVP-MIB b/MIBS/telco-systems/binox/PRVT-RSVP-MIB
new file mode 100644
index 0000000..5110e13
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-RSVP-MIB
@@ -0,0 +1,201 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-RSVP-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-RSVP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    mpls
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+prvtRsvpMIB MODULE-IDENTITY
+    LAST-UPDATED "201103210000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB module for management of the PRVT-RSVP product."
+    REVISION    "201103210000Z"
+    DESCRIPTION 
+        "Added prvtRsvpProductFastRerouteCaps."
+    REVISION    "200902100000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { mpls 7 }
+
+
+PrvtRsvpAdminStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The desired administrative state of an RSVP
+         entity."
+    SYNTAX      INTEGER { up(1), down(2) }
+
+PrvtRsvpOperStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The current operational state of an RSVP entity."
+    SYNTAX      INTEGER { up(1), down(2), goingUp(3), goingDown(4), 
+                    actFailed(5) }
+
+PrvtRsvpIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The index value identifying an RSVP entity."
+    SYNTAX      Unsigned32
+
+prvtRsvpObjects OBJECT IDENTIFIER
+    ::= { prvtRsvpMIB 1 }
+
+prvtRsvpProductTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtRsvpProductEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of RSVP entities."
+    ::= { prvtRsvpObjects 1 }
+
+prvtRsvpProductEntry OBJECT-TYPE
+    SYNTAX      PrvtRsvpProductEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry represents an RSVP entity."
+    INDEX       { prvtRsvpProductIndex }
+    ::= { prvtRsvpProductTable 1 }
+
+PrvtRsvpProductEntry ::= SEQUENCE {
+    prvtRsvpProductIndex                PrvtRsvpIndex,
+    prvtRsvpProductRowStatus            RowStatus,
+    prvtRsvpProductAdminStatus          PrvtRsvpAdminStatus,
+    prvtRsvpProductOperStatus           PrvtRsvpOperStatus,
+    prvtRsvpProductProtocolExtensions   BITS,
+    prvtRsvpProductFastRerouteCaps      BITS
+}
+
+prvtRsvpProductIndex OBJECT-TYPE
+    SYNTAX      PrvtRsvpIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The index of this prvtRsvpProductEntry. This is the
+         HAF entity index passed on the entity create parameters."
+    ::= { prvtRsvpProductEntry 1 }
+
+prvtRsvpProductRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used to create and delete a PRVT-RSVP Product Table entry.
+         When this object is set to 'active', only the
+         prvtRsvpProductAdminStatus object in the row may be modified."
+    ::= { prvtRsvpProductEntry 2 }
+
+prvtRsvpProductAdminStatus OBJECT-TYPE
+    SYNTAX      PrvtRsvpAdminStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The desired administrative state of the RSVP entity."
+    ::= { prvtRsvpProductEntry 3 }
+
+prvtRsvpProductOperStatus OBJECT-TYPE
+    SYNTAX      PrvtRsvpOperStatus
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current operational state of this instance of PRVT-RSVP."
+    ::= { prvtRsvpProductEntry 4 }
+
+prvtRsvpProductProtocolExtensions OBJECT-TYPE
+    SYNTAX      BITS { bypassFastReroute(0), detourFastReroute(1), 
+                    noResAffOnInIf(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies which extensions to the standard RSVP-TE protocol
+         are enabled. For fully standards-compliant behavior, set
+         this parameter to zero (no bits set). To enable specific
+         non-standard protocol extensions, set this parameter to the
+         bitwise OR of whichever of the following behaviors you wish
+         to enable.
+         
+         - bypassFastReroute: Enable support for facility fast reroute
+         protection of LSPs (bypass LSP protection).
+         
+         - detourFastReroute: Enable support for one-to-one fast
+         reroute protection of LSPs (detour LSP protection).
+         
+         - noResAffOnInIf: Disable resource affinity checking on
+         incoming interfaces for LSPs. If this flag is set, RSVP
+         will accept Path messages which use invalid resource
+         affinities for the incoming interface used by the LSP."
+    ::= { prvtRsvpProductEntry 5 }
+
+prvtRsvpProductFastRerouteCaps OBJECT-TYPE
+    SYNTAX      BITS { fastReroutePLR(0), fastRerouteMP(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifies what fast reroute capabilities are enabled
+         on this node.
+         This field is only valid when the fast reroute extension
+         is enabled (i.e. prvtRsvpProductProtocolExtensions has
+         either of the bypassFastReroute, or detourFastReroute
+         bits set or both).
+         When the fast reroute extension is not enabled, this
+         field should be cleared (no bits set).
+         
+         - PLR: Node provides fast reroute point of local repair
+         capability.
+         
+         - MP: Node provides fast reroute merge point capability."
+    ::= { prvtRsvpProductEntry 6 }
+
+END -- end of module PRVT-RSVP-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SAA-MIB b/MIBS/telco-systems/binox/PRVT-SAA-MIB
new file mode 100644
index 0000000..8f5e463
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SAA-MIB
@@ -0,0 +1,2295 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SAA-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SAA-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    Counter32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtSaaMIB MODULE-IDENTITY
+    LAST-UPDATED "201405160000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This MIB provides the extended capability of controlling and
+         provisioning various OAM tests and SAA monitoring."
+    REVISION    "201405160000Z"
+    DESCRIPTION 
+        "Removed hidden leaf and fixed several type mismatches."
+    REVISION    "201401230000Z"
+    DESCRIPTION 
+        "Added SAA Y1731-SLM support."
+    REVISION    "201311180000Z"
+    DESCRIPTION 
+        "New y1731 SLM traps.
+         prvtSaaY1731NotificationTable notification table."
+    REVISION    "201303270000Z"
+    DESCRIPTION 
+        "Added SAA Y1564 support."
+    REVISION    "201301230000Z"
+    DESCRIPTION 
+        "Minor updates. SAA Y1564 is not yet supported in this mib."
+    REVISION    "201005270000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 130 }
+
+
+PrvtSaaNameType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "32a"
+    STATUS      current
+    DESCRIPTION 
+        "Saa name type"
+    SYNTAX      OCTET STRING (SIZE(1..32))
+
+prvtSaaNotifications OBJECT IDENTIFIER
+    ::= { prvtSaaMIB 0 }
+
+prvtSaaObjects OBJECT IDENTIFIER
+    ::= { prvtSaaMIB 1 }
+
+prvtSaaProfiles OBJECT IDENTIFIER
+    ::= { prvtSaaObjects 1 }
+
+prvtSaaProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table contains SAA thresholds."
+    ::= { prvtSaaProfiles 1 }
+
+prvtSaaProfileEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtSaaProfileTable"
+    INDEX       { prvtSaaProfileName }
+    ::= { prvtSaaProfileTable 1 }
+
+PrvtSaaProfileEntry ::= SEQUENCE {
+    prvtSaaProfileName                      PrvtSaaNameType,
+    prvtSaaProfileRowStatus                 RowStatus,
+    prvtSaaProfileType                      INTEGER,
+    prvtSaaProfileY1731DelayNearEnd         Unsigned32,
+    prvtSaaProfileY1731DelayFarEnd          Unsigned32,
+    prvtSaaProfileY1731JitterNearEnd        Unsigned32,
+    prvtSaaProfileY1731JitterFarEnd         Unsigned32,
+    prvtSaaProfileY1731FrameLossNearEnd     Unsigned32,
+    prvtSaaProfileY1731FrameLossFarEnd      Unsigned32,
+    prvtSaaProfileRfc2544FrameLoss          Unsigned32,
+    prvtSaaProfileY1564FrameLoss            Unsigned32,
+    prvtSaaProfileY1564FrameDelay           Unsigned32,
+    prvtSaaProfileY1731SlmDelayNearEnd      Unsigned32,
+    prvtSaaProfileY1731SlmDelayFarEnd       Unsigned32,
+    prvtSaaProfileY1731SlmJitterNearEnd     Unsigned32,
+    prvtSaaProfileY1731SlmJitterFarEnd      Unsigned32,
+    prvtSaaProfileY1731SlmFrameLossNearEnd  Unsigned32,
+    prvtSaaProfileY1731SlmFrameLossFarEnd   Unsigned32
+}
+
+prvtSaaProfileName OBJECT-TYPE
+    SYNTAX      PrvtSaaNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SAA profile table index."
+    ::= { prvtSaaProfileEntry 1 }
+
+prvtSaaProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Creation/delete/edit of the SAA profile. "
+    ::= { prvtSaaProfileEntry 2 }
+
+prvtSaaProfileType OBJECT-TYPE
+    SYNTAX      INTEGER { y1731(1), rfc2544(2), y1564(3), y1731slm(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify profile type."
+    ::= { prvtSaaProfileEntry 3 }
+
+prvtSaaProfileY1731DelayNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Near end delay in microseconds"
+    ::= { prvtSaaProfileEntry 4 }
+
+prvtSaaProfileY1731DelayFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Far end delay in microseconds"
+    ::= { prvtSaaProfileEntry 5 }
+
+prvtSaaProfileY1731JitterNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Near end jitter in microseconds"
+    ::= { prvtSaaProfileEntry 6 }
+
+prvtSaaProfileY1731JitterFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Far end jitter in microseconds"
+    ::= { prvtSaaProfileEntry 7 }
+
+prvtSaaProfileY1731FrameLossNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Near end frame-loss measured in 0.001 of percent"
+    ::= { prvtSaaProfileEntry 8 }
+
+prvtSaaProfileY1731FrameLossFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Far end frame-loss measured in 0.001 of percent"
+    ::= { prvtSaaProfileEntry 9 }
+
+prvtSaaProfileRfc2544FrameLoss OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify maximum frameloss to declare test succeeded"
+    ::= { prvtSaaProfileEntry 10 }
+
+prvtSaaProfileY1564FrameLoss OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify maximum frameloss to declare test succeeded"
+    ::= { prvtSaaProfileEntry 11 }
+
+prvtSaaProfileY1564FrameDelay OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify delay in microseconds"
+    ::= { prvtSaaProfileEntry 12 }
+
+prvtSaaProfileY1731SlmDelayNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Near end delay in microseconds"
+    ::= { prvtSaaProfileEntry 13 }
+
+prvtSaaProfileY1731SlmDelayFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Far end delay in microseconds"
+    ::= { prvtSaaProfileEntry 14 }
+
+prvtSaaProfileY1731SlmJitterNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Near end jitter in microseconds"
+    ::= { prvtSaaProfileEntry 15 }
+
+prvtSaaProfileY1731SlmJitterFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Far end jitter in microseconds"
+    ::= { prvtSaaProfileEntry 16 }
+
+prvtSaaProfileY1731SlmFrameLossNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Near end frame-loss measured in 0.001 of percent"
+    ::= { prvtSaaProfileEntry 17 }
+
+prvtSaaProfileY1731SlmFrameLossFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Far end frame-loss measured in 0.001 of percent"
+    ::= { prvtSaaProfileEntry 18 }
+
+prvtSaaTest OBJECT IDENTIFIER
+    ::= { prvtSaaObjects 2 }
+
+prvtSaaTestTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table holds the configuration for a SAA test"
+    ::= { prvtSaaTest 1 }
+
+prvtSaaTestEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtSaaTestTable"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner }
+    ::= { prvtSaaTestTable 1 }
+
+PrvtSaaTestEntry ::= SEQUENCE {
+    prvtSaaTestName                             PrvtSaaNameType,
+    prvtSaaTestOwner                            PrvtSaaNameType,
+    prvtSaaTestRowStatus                        RowStatus,
+    prvtSaaTestType                             INTEGER,
+    prvtSaaTestProfile                          PrvtSaaNameType,
+    prvtSaaTestEnable                           TruthValue,
+    prvtSaaTestStatus                           INTEGER,
+    prvtSaaTestY1731Mode                        INTEGER,
+    prvtSaaTestY1731Domain                      OCTET STRING,
+    prvtSaaTestY1731MA                          OCTET STRING,
+    prvtSaaTestY1731Mep                         Unsigned32,
+    prvtSaaTestY1731TargetType                  INTEGER,
+    prvtSaaTestY1731TargetMac                   MacAddress,
+    prvtSaaTestY1731TargetMep                   Unsigned32,
+    prvtSaaTestY1731Priority                    Unsigned32,
+    prvtSaaTestY1731Frequency                   Unsigned32,
+    prvtSaaTestY1731Interval                    Unsigned32,
+    prvtSaaTestY1731Period                      Unsigned32,
+    prvtSaaTestY1731Timeout                     Unsigned32,
+    prvtSaaTestY1731Function                    INTEGER,
+    prvtSaaTestY1731DelayMethod                 INTEGER,
+    prvtSaaTestY1731DelayPValue                 Unsigned32,
+    prvtSaaTestY1731JitterMethod                INTEGER,
+    prvtSaaTestY1731JitterPValue                Unsigned32,
+    prvtSaaTestY1731History                     Unsigned32,
+    prvtSaaTestRfc2544Mode                      INTEGER,
+    prvtSaaTestRfc2544Domain                    OCTET STRING,
+    prvtSaaTestRfc2544MA                        OCTET STRING,
+    prvtSaaTestRfc2544Mep                       Unsigned32,
+    prvtSaaTestRfc2544TargetType                INTEGER,
+    prvtSaaTestRfc2544TargetMac                 MacAddress,
+    prvtSaaTestRfc2544TargetMep                 Unsigned32,
+    prvtSaaTestRfc2544Cir                       Unsigned32,
+    prvtSaaTestRfc2544Cbs                       Unsigned32,
+    prvtSaaTestRfc2544BurstPercentage           Unsigned32,
+    prvtSaaTestRfc2544Duration                  Unsigned32,
+    prvtSaaTestRfc2544Pattern                   INTEGER,
+    prvtSaaTestRfc2544LoopbackType              INTEGER,
+    prvtSaaTestRfc2544CVlan                     Unsigned32,
+    prvtSaaTestRfc2544CVlanPriority             Unsigned32,
+    prvtSaaTestRfc2544CVlanDropEligible         TruthValue,
+    prvtSaaTestRfc2544SVlanPriority             Unsigned32,
+    prvtSaaTestRfc2544SVlanDropEligible         TruthValue,
+    prvtSaaTestRfc2544Timeout                   Unsigned32,
+    prvtSaaTestRfc2544ResultAckTimeout          Unsigned32,
+    prvtSaaTestY1564Mode                        INTEGER,
+    prvtSaaTestY1564Domain                      OCTET STRING,
+    prvtSaaTestY1564Ma                          OCTET STRING,
+    prvtSaaTestY1564Mep                         Unsigned32,
+    prvtSaaTestY1564Function                    INTEGER,
+    prvtSaaTestY1564CVlan                       Unsigned32,
+    prvtSaaTestY1564CVlanPriority               Unsigned32,
+    prvtSaaTestY1564CVlanDropEligible           TruthValue,
+    prvtSaaTestY1564SVlanPriority               Unsigned32,
+    prvtSaaTestY1564SVlanDropEligible           TruthValue,
+    prvtSaaTestY1564TargetType                  INTEGER,
+    prvtSaaTestY1564TargetMac                   MacAddress,
+    prvtSaaTestY1564TargetMep                   Unsigned32,
+    prvtSaaTestY1564Cir                         Unsigned32,
+    prvtSaaTestY1564Eir                         Unsigned32,
+    prvtSaaTestY1564Pattern                     INTEGER,
+    prvtSaaTestY1564ConfigurationStepDuration   Unsigned32,
+    prvtSaaTestY1564PerformanceTestDuration     INTEGER,
+    prvtSaaTestY1564TrafficPolicing             TruthValue,
+    prvtSaaTestY1564CirSteps                    Unsigned32,
+    prvtSaaTestY1564Timeout                     Unsigned32,
+    prvtSaaTestY1564LoopbackType                INTEGER,
+    prvtSaaTestY1564DataSize                    OCTET STRING,
+    prvtSaaTestY1564CustomDataSize              Unsigned32,
+    prvtSaaTestY1731SlmMode                     INTEGER,
+    prvtSaaTestY1731SlmDomain                   OCTET STRING,
+    prvtSaaTestY1731SlmMA                       OCTET STRING,
+    prvtSaaTestY1731SlmMep                      Unsigned32,
+    prvtSaaTestY1731SlmTargetType               INTEGER,
+    prvtSaaTestY1731SlmTargetMac                MacAddress,
+    prvtSaaTestY1731SlmTargetMep                Unsigned32,
+    prvtSaaTestY1731SlmPriority                 Unsigned32,
+    prvtSaaTestY1731SlmInterval                 Unsigned32,
+    prvtSaaTestY1731SlmPeriod                   INTEGER,
+    prvtSaaTestY1731SlmTestId                   Unsigned32,
+    prvtSaaTestY1731SlmPduSize                  Unsigned32,
+    prvtSaaTestY1731SlmDropEligible             TruthValue,
+    prvtSaaTestY1731SlmIncludeDelay             TruthValue,
+    prvtSaaTestY1731SlmHistory                  Unsigned32,
+    prvtSaaTestY1731CountAllPriorities          TruthValue
+}
+
+prvtSaaTestName OBJECT-TYPE
+    SYNTAX      PrvtSaaNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This string is used to describe the test name for the
+         Y1731 Pm SAA test. It is also used as a test identifier."
+    ::= { prvtSaaTestEntry 1 }
+
+prvtSaaTestOwner OBJECT-TYPE
+    SYNTAX      PrvtSaaNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This string is used to describe the owner of the
+         Y1731 Pm SAA test."
+    ::= { prvtSaaTestEntry 2 }
+
+prvtSaaTestRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus"
+    ::= { prvtSaaTestEntry 3 }
+
+prvtSaaTestType OBJECT-TYPE
+    SYNTAX      INTEGER { y1731(1), rfc2544(2), y1564(3), y1731slm(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "SAA test type. Test y1564 is not supported yet."
+    ::= { prvtSaaTestEntry 4 }
+
+prvtSaaTestProfile OBJECT-TYPE
+    SYNTAX      PrvtSaaNameType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify test profile"
+    ::= { prvtSaaTestEntry 5 }
+
+prvtSaaTestEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "SAA Y1731 Pm test execution status."
+    ::= { prvtSaaTestEntry 6 }
+
+prvtSaaTestStatus OBJECT-TYPE
+    SYNTAX      INTEGER { na(0), pending(1), started(2), running(3), 
+                    finished(4), stopped(5) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Operational status of the SAA test"
+    ::= { prvtSaaTestEntry 7 }
+
+prvtSaaTestY1731Mode OBJECT-TYPE
+    SYNTAX      INTEGER { test(1), loopback(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify test Y1731 mode"
+    ::= { prvtSaaTestEntry 8 }
+
+prvtSaaTestY1731Domain OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..22))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify Y1731 domain level"
+    ::= { prvtSaaTestEntry 9 }
+
+prvtSaaTestY1731MA OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..22))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify Y1731 cfm ma"
+    ::= { prvtSaaTestEntry 10 }
+
+prvtSaaTestY1731Mep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify mep id"
+    ::= { prvtSaaTestEntry 12 }
+
+prvtSaaTestY1731TargetType OBJECT-TYPE
+    SYNTAX      INTEGER { mac(1), mep(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The target type of the remote device"
+    ::= { prvtSaaTestEntry 13 }
+
+prvtSaaTestY1731TargetMac OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote device"
+    ::= { prvtSaaTestEntry 14 }
+
+prvtSaaTestY1731TargetMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote device"
+    ::= { prvtSaaTestEntry 15 }
+
+prvtSaaTestY1731Priority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify packet priority"
+    ::= { prvtSaaTestEntry 16 }
+
+prvtSaaTestY1731Frequency OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify frequency of repetition"
+    ::= { prvtSaaTestEntry 17 }
+
+prvtSaaTestY1731Interval OBJECT-TYPE
+    SYNTAX      Unsigned32 (60..3600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify interval, in seconds"
+    ::= { prvtSaaTestEntry 18 }
+
+prvtSaaTestY1731Period OBJECT-TYPE
+    SYNTAX      Unsigned32 (100..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify period, in milliseconds"
+    ::= { prvtSaaTestEntry 19 }
+
+prvtSaaTestY1731Timeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Define the timeout interval for each packet, in seconds"
+    ::= { prvtSaaTestEntry 20 }
+
+prvtSaaTestY1731Function OBJECT-TYPE
+    SYNTAX      INTEGER { lossMeasurement(1), delayMeasurement(2), 
+                    both(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify test functions"
+    ::= { prvtSaaTestEntry 21 }
+
+prvtSaaTestY1731DelayMethod OBJECT-TYPE
+    SYNTAX      INTEGER { average(1), pPercentile(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify delay calculation method"
+    ::= { prvtSaaTestEntry 23 }
+
+prvtSaaTestY1731DelayPValue OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify delay p value"
+    ::= { prvtSaaTestEntry 24 }
+
+prvtSaaTestY1731JitterMethod OBJECT-TYPE
+    SYNTAX      INTEGER { peakToPeak(1), variance(2), pPercentile(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify jitter calculation method"
+    ::= { prvtSaaTestEntry 25 }
+
+prvtSaaTestY1731JitterPValue OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify jitter p value"
+    ::= { prvtSaaTestEntry 26 }
+
+prvtSaaTestY1731History OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..120)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify number of last stored probes"
+    ::= { prvtSaaTestEntry 27 }
+
+prvtSaaTestRfc2544Mode OBJECT-TYPE
+    SYNTAX      INTEGER { uniTestHead(1), biTestHead(2), uniTestTail(3), 
+                    biTestLoopback(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify test mode"
+    ::= { prvtSaaTestEntry 28 }
+
+prvtSaaTestRfc2544Domain OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..22))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifty CFM Domain id"
+    ::= { prvtSaaTestEntry 29 }
+
+prvtSaaTestRfc2544MA OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..22))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifty CFM MA name"
+    ::= { prvtSaaTestEntry 30 }
+
+prvtSaaTestRfc2544Mep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify CFM source MEP"
+    ::= { prvtSaaTestEntry 31 }
+
+prvtSaaTestRfc2544TargetType OBJECT-TYPE
+    SYNTAX      INTEGER { mac(1), mep(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify target type"
+    ::= { prvtSaaTestEntry 32 }
+
+prvtSaaTestRfc2544TargetMac OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify target MAC address"
+    ::= { prvtSaaTestEntry 33 }
+
+prvtSaaTestRfc2544TargetMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify target MEP"
+    ::= { prvtSaaTestEntry 34 }
+
+prvtSaaTestRfc2544Cir OBJECT-TYPE
+    SYNTAX      Unsigned32 (64..10000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify Committed Information Rate"
+    ::= { prvtSaaTestEntry 35 }
+
+prvtSaaTestRfc2544Cbs OBJECT-TYPE
+    SYNTAX      Unsigned32 (10..2048)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify Committed Burst Size"
+    ::= { prvtSaaTestEntry 36 }
+
+prvtSaaTestRfc2544BurstPercentage OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify burst percentage"
+    ::= { prvtSaaTestEntry 37 }
+
+prvtSaaTestRfc2544Duration OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..180)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify duration, in seconds"
+    ::= { prvtSaaTestEntry 38 }
+
+prvtSaaTestRfc2544Pattern OBJECT-TYPE
+    SYNTAX      INTEGER { null(1), nullCrc(2), prbs(3), prbsCrc(4), 
+                    none(8) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify pattern type"
+    ::= { prvtSaaTestEntry 39 }
+
+prvtSaaTestRfc2544LoopbackType OBJECT-TYPE
+    SYNTAX      INTEGER { macSwap(1), oam(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify loopback type"
+    ::= { prvtSaaTestEntry 40 }
+
+prvtSaaTestRfc2544CVlan OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4094)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify C-VLAN"
+    ::= { prvtSaaTestEntry 41 }
+
+prvtSaaTestRfc2544CVlanPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify C-VLAN priority"
+    ::= { prvtSaaTestEntry 42 }
+
+prvtSaaTestRfc2544CVlanDropEligible OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify C-VLAN drop eligible"
+    ::= { prvtSaaTestEntry 43 }
+
+prvtSaaTestRfc2544SVlanPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify S-VLAN priority"
+    ::= { prvtSaaTestEntry 44 }
+
+prvtSaaTestRfc2544SVlanDropEligible OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify S-VLAN drop eligible"
+    ::= { prvtSaaTestEntry 45 }
+
+prvtSaaTestRfc2544Timeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The timeout interval for the test packet, in x100 milliseconds"
+    ::= { prvtSaaTestEntry 46 }
+
+prvtSaaTestRfc2544ResultAckTimeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The time the test-head waits for an inform acknowledgment from the test-tail, in seconds"
+    ::= { prvtSaaTestEntry 47 }
+
+prvtSaaTestY1564Mode OBJECT-TYPE
+    SYNTAX      INTEGER { biTestHead(1), biTestLoopback(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify SAA Y1564 test mode"
+    ::= { prvtSaaTestEntry 48 }
+
+prvtSaaTestY1564Domain OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..22))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifty CFM Domain id"
+    ::= { prvtSaaTestEntry 49 }
+
+prvtSaaTestY1564Ma OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..22))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specifty CFM MA name"
+    ::= { prvtSaaTestEntry 50 }
+
+prvtSaaTestY1564Mep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify CFM source MEP"
+    ::= { prvtSaaTestEntry 51 }
+
+prvtSaaTestY1564Function OBJECT-TYPE
+    SYNTAX      INTEGER { configuration(1), performance(2), both(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify SAA Y1564 test function"
+    ::= { prvtSaaTestEntry 52 }
+
+prvtSaaTestY1564CVlan OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4094)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify C-VLAN"
+    ::= { prvtSaaTestEntry 53 }
+
+prvtSaaTestY1564CVlanPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify C-VLAN priority"
+    ::= { prvtSaaTestEntry 54 }
+
+prvtSaaTestY1564CVlanDropEligible OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify C-VLAN drop eligible"
+    ::= { prvtSaaTestEntry 55 }
+
+prvtSaaTestY1564SVlanPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify S-VLAN priority"
+    ::= { prvtSaaTestEntry 56 }
+
+prvtSaaTestY1564SVlanDropEligible OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify S-VLAN drop eligible"
+    ::= { prvtSaaTestEntry 57 }
+
+prvtSaaTestY1564TargetType OBJECT-TYPE
+    SYNTAX      INTEGER { mac(1), mep(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify target type"
+    ::= { prvtSaaTestEntry 58 }
+
+prvtSaaTestY1564TargetMac OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify target MAC address"
+    ::= { prvtSaaTestEntry 59 }
+
+prvtSaaTestY1564TargetMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify target MEP"
+    ::= { prvtSaaTestEntry 60 }
+
+prvtSaaTestY1564Cir OBJECT-TYPE
+    SYNTAX      Unsigned32 (64..1000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify Committed Information Rate"
+    ::= { prvtSaaTestEntry 61 }
+
+prvtSaaTestY1564Eir OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..1000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify EIR"
+    ::= { prvtSaaTestEntry 62 }
+
+prvtSaaTestY1564Pattern OBJECT-TYPE
+    SYNTAX      INTEGER { null(1), nullCrc(2), prbs(3), prbsCrc(4), 
+                    none(8) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify pattern type"
+    ::= { prvtSaaTestEntry 63 }
+
+prvtSaaTestY1564ConfigurationStepDuration OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..60)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify configuration test step duration"
+    ::= { prvtSaaTestEntry 64 }
+
+prvtSaaTestY1564PerformanceTestDuration OBJECT-TYPE
+    SYNTAX      INTEGER { duration15min(1), duration30min(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify performance test duration"
+    ::= { prvtSaaTestEntry 65 }
+
+prvtSaaTestY1564TrafficPolicing OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable traffic policing test"
+    ::= { prvtSaaTestEntry 66 }
+
+prvtSaaTestY1564CirSteps OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..10)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify the number of steps for configuration test"
+    ::= { prvtSaaTestEntry 67 }
+
+prvtSaaTestY1564Timeout OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The timeout interval for the test packet, in x100 milliseconds"
+    ::= { prvtSaaTestEntry 68 }
+
+prvtSaaTestY1564LoopbackType OBJECT-TYPE
+    SYNTAX      INTEGER { macSwap(1), oam(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify loopback type"
+    ::= { prvtSaaTestEntry 69 }
+
+prvtSaaTestY1564DataSize OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify test PDU size"
+    ::= { prvtSaaTestEntry 70 }
+
+prvtSaaTestY1564CustomDataSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (64..9000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify test custom PDU size"
+    ::= { prvtSaaTestEntry 71 }
+
+prvtSaaTestY1731SlmMode OBJECT-TYPE
+    SYNTAX      INTEGER { uni-test-head(1), bi-test-head(2), 
+                    uni-test-tail(3), bi-test-loopback(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify test Y1731-slm mode"
+    ::= { prvtSaaTestEntry 72 }
+
+prvtSaaTestY1731SlmDomain OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..22))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify Y1731-slm domain level"
+    ::= { prvtSaaTestEntry 73 }
+
+prvtSaaTestY1731SlmMA OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..22))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify Y1731-slm cfm ma"
+    ::= { prvtSaaTestEntry 74 }
+
+prvtSaaTestY1731SlmMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify mep id"
+    ::= { prvtSaaTestEntry 75 }
+
+prvtSaaTestY1731SlmTargetType OBJECT-TYPE
+    SYNTAX      INTEGER { mac(1), mep(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The target type of the remote device"
+    ::= { prvtSaaTestEntry 76 }
+
+prvtSaaTestY1731SlmTargetMac OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote device"
+    ::= { prvtSaaTestEntry 77 }
+
+prvtSaaTestY1731SlmTargetMep OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..8191)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MAC address of the remote device"
+    ::= { prvtSaaTestEntry 78 }
+
+prvtSaaTestY1731SlmPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify packet priority"
+    ::= { prvtSaaTestEntry 79 }
+
+prvtSaaTestY1731SlmInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (60..3600)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify interval, in seconds"
+    ::= { prvtSaaTestEntry 80 }
+
+prvtSaaTestY1731SlmPeriod OBJECT-TYPE
+    SYNTAX      INTEGER { i300Hz(3), i10msec(10), i100msec(100), 
+                    i1sec(1000) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify period, in milliseconds"
+    ::= { prvtSaaTestEntry 81 }
+
+prvtSaaTestY1731SlmTestId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4095)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify slm test-id"
+    ::= { prvtSaaTestEntry 82 }
+
+prvtSaaTestY1731SlmPduSize OBJECT-TYPE
+    SYNTAX      Unsigned32 (64..9000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify slm packet size in bytes"
+    ::= { prvtSaaTestEntry 83 }
+
+prvtSaaTestY1731SlmDropEligible OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify SLM packets drop eligible flag"
+    ::= { prvtSaaTestEntry 84 }
+
+prvtSaaTestY1731SlmIncludeDelay OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify if SLM measurement will include delay"
+    ::= { prvtSaaTestEntry 85 }
+
+prvtSaaTestY1731SlmHistory OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..120)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify number of last stored probes"
+    ::= { prvtSaaTestEntry 86 }
+
+prvtSaaTestY1731CountAllPriorities OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Measure for all priorities"
+    ::= { prvtSaaTestEntry 87 }
+
+prvtSaaTestDataSizeTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaTestDataSizeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table holds the configuration for a SAA test data-size"
+    ::= { prvtSaaTest 2 }
+
+prvtSaaTestDataSizeEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaTestDataSizeEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtSaaTestDataSizeTable"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner, 
+                  prvtSaaTestDataSizeIdx }
+    ::= { prvtSaaTestDataSizeTable 1 }
+
+PrvtSaaTestDataSizeEntry ::= SEQUENCE {
+    prvtSaaTestDataSizeIdx          INTEGER,
+    prvtSaaTestDataSizeRowStatus    RowStatus
+}
+
+prvtSaaTestDataSizeIdx OBJECT-TYPE
+    SYNTAX      INTEGER { i64(1), i128(2), i256(4), i512(8), i1024(16), 
+                    i1280(32), i1518(64), i1522(128), i1526(256), 
+                    i1530(512), i1534(1024), i2000(2048), i9000(4096) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Define the PDU size for which the test is executed, in bytes"
+    ::= { prvtSaaTestDataSizeEntry 1 }
+
+prvtSaaTestDataSizeRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Row Status field in prvtSaaTestDataSizeTable"
+    ::= { prvtSaaTestDataSizeEntry 2 }
+
+prvtSaaTestResult OBJECT IDENTIFIER
+    ::= { prvtSaaObjects 3 }
+
+prvtSaaTestY1731ResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaTestY1731ResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains SAA results for Y1731 tests."
+    ::= { prvtSaaTestResult 1 }
+
+prvtSaaTestY1731ResultEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaTestY1731ResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Y.1731 test result table"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner, 
+                  prvtSaaTestY1731ResultIndex }
+    ::= { prvtSaaTestY1731ResultTable 1 }
+
+PrvtSaaTestY1731ResultEntry ::= SEQUENCE {
+    prvtSaaTestY1731ResultIndex                     Unsigned32,
+    prvtSaaTestY1731ResultMep                       Unsigned32,
+    prvtSaaTestY1731ResultDelayNearEnd              Unsigned32,
+    prvtSaaTestY1731ResultDelayFarEnd               Unsigned32,
+    prvtSaaTestY1731ResultJitterNearEnd             Unsigned32,
+    prvtSaaTestY1731ResultJitterFarEnd              Unsigned32,
+    prvtSaaTestY1731ResultFrameLossNearEnd          Unsigned32,
+    prvtSaaTestY1731ResultFrameLossFarEnd           Unsigned32,
+    prvtSaaTestY1731ResultFramesSentNearEnd         Counter32,
+    prvtSaaTestY1731ResultFramesSentFarEnd          Counter32,
+    prvtSaaTestY1731ResultFramesReceivedNearEnd     Counter32,
+    prvtSaaTestY1731ResultFramesReceivedFarEnd      Counter32,
+    prvtSaaTestY1731ResultFramesPacketSend          Counter32,
+    prvtSaaTestY1731ResultTimeouts                  Unsigned32,
+    prvtSaaTestY1731ResultErrors                    Unsigned32,
+    prvtSaaTestY1731ResultCompletionTime            Unsigned32,
+    prvtSaaTestEpsSwitchover                        Unsigned32
+}
+
+prvtSaaTestY1731ResultIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SAA Y1731 test results table index"
+    ::= { prvtSaaTestY1731ResultEntry 1 }
+
+prvtSaaTestY1731ResultMep OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Mep id"
+    ::= { prvtSaaTestY1731ResultEntry 2 }
+
+prvtSaaTestY1731ResultDelayNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end delay result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731ResultEntry 3 }
+
+prvtSaaTestY1731ResultDelayFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end delay result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731ResultEntry 4 }
+
+prvtSaaTestY1731ResultJitterNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end jitter result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731ResultEntry 5 }
+
+prvtSaaTestY1731ResultJitterFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end jitter result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731ResultEntry 6 }
+
+prvtSaaTestY1731ResultFrameLossNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end frame-loss result in 0.001 of a percent"
+    ::= { prvtSaaTestY1731ResultEntry 7 }
+
+prvtSaaTestY1731ResultFrameLossFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end frame-loss result in 0.001 of a percent"
+    ::= { prvtSaaTestY1731ResultEntry 8 }
+
+prvtSaaTestY1731ResultFramesSentNearEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end sent frames"
+    ::= { prvtSaaTestY1731ResultEntry 9 }
+
+prvtSaaTestY1731ResultFramesSentFarEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end sent frames"
+    ::= { prvtSaaTestY1731ResultEntry 10 }
+
+prvtSaaTestY1731ResultFramesReceivedNearEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end received frames"
+    ::= { prvtSaaTestY1731ResultEntry 11 }
+
+prvtSaaTestY1731ResultFramesReceivedFarEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end received frames"
+    ::= { prvtSaaTestY1731ResultEntry 12 }
+
+prvtSaaTestY1731ResultFramesPacketSend OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Sent packets"
+    ::= { prvtSaaTestY1731ResultEntry 13 }
+
+prvtSaaTestY1731ResultTimeouts OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of timeouts for the SAA Y1731 Pm test"
+    ::= { prvtSaaTestY1731ResultEntry 14 }
+
+prvtSaaTestY1731ResultErrors OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Number of errors for the SAA Y1731 Pm test"
+    ::= { prvtSaaTestY1731ResultEntry 15 }
+
+prvtSaaTestY1731ResultCompletionTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Completion time for the SAA Y1731 PM test (format is unix time)."
+    ::= { prvtSaaTestY1731ResultEntry 16 }
+
+prvtSaaTestEpsSwitchover OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Marks if eps switchover occured."
+    ::= { prvtSaaTestY1731ResultEntry 17 }
+
+prvtSaaTestRfc2544ResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaTestRfc2544ResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains SAA results for Rfc2544 tests."
+    ::= { prvtSaaTestResult 2 }
+
+prvtSaaTestRfc2544ResultEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaTestRfc2544ResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtSaaTestRfc2544ResultTable"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner, 
+                  prvtSaaTestRfc2544ResultIndex, 
+                  prvtSaaTestRfc2544ResultPduIndex }
+    ::= { prvtSaaTestRfc2544ResultTable 1 }
+
+PrvtSaaTestRfc2544ResultEntry ::= SEQUENCE {
+    prvtSaaTestRfc2544ResultIndex           Unsigned32,
+    prvtSaaTestRfc2544ResultPduIndex        Unsigned32,
+    prvtSaaTestRfc2544ResultFrameLoss       Unsigned32,
+    prvtSaaTestRfc2544ResultThroughput      Unsigned32,
+    prvtSaaTestRfc2544ResultNetThroughput   Unsigned32,
+    prvtSaaTestRfc2544ResultMinDelay        Unsigned32,
+    prvtSaaTestRfc2544ResultMaxDelay        Unsigned32,
+    prvtSaaTestRfc2544ResultAvgDelay        Unsigned32,
+    prvtSaaTestRfc2544ResultStatus          Unsigned32
+}
+
+prvtSaaTestRfc2544ResultIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SAA RFC2544 Throughput test results table index."
+    ::= { prvtSaaTestRfc2544ResultEntry 1 }
+
+prvtSaaTestRfc2544ResultPduIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SAA RFC2544 Throughput test results table pdu size"
+    ::= { prvtSaaTestRfc2544ResultEntry 2 }
+
+prvtSaaTestRfc2544ResultFrameLoss OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Frame loss of the SAA RFC2544 test measured in 0.001 of a percent"
+    ::= { prvtSaaTestRfc2544ResultEntry 3 }
+
+prvtSaaTestRfc2544ResultThroughput OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Throughput of the SAA RFC2544 test measured in Kbps"
+    ::= { prvtSaaTestRfc2544ResultEntry 4 }
+
+prvtSaaTestRfc2544ResultNetThroughput OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The actual throughput of the SAA RFC2544 test
+         containing only user data. It is measured in Kbps."
+    ::= { prvtSaaTestRfc2544ResultEntry 5 }
+
+prvtSaaTestRfc2544ResultMinDelay OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Minimum Delay measured in nanoseconds"
+    ::= { prvtSaaTestRfc2544ResultEntry 6 }
+
+prvtSaaTestRfc2544ResultMaxDelay OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Maximum Delay measured in nanoseconds"
+    ::= { prvtSaaTestRfc2544ResultEntry 7 }
+
+prvtSaaTestRfc2544ResultAvgDelay OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Average Delay measured in nanoseconds"
+    ::= { prvtSaaTestRfc2544ResultEntry 8 }
+
+prvtSaaTestRfc2544ResultStatus OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status of the SAA RFC2544 test"
+    ::= { prvtSaaTestRfc2544ResultEntry 9 }
+
+prvtSaaTestY1564ResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaTestY1564ResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains SAA results for Y1564 tests."
+    ::= { prvtSaaTestResult 3 }
+
+prvtSaaTestY1564ResultEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaTestY1564ResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtSaaTestY1564ResultTable"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner, 
+                  prvtSaaTestY1564ResultIndex, 
+                  prvtSaaTestY1564ResultStep, prvtSaaTestY1564ResultPdu }
+    ::= { prvtSaaTestY1564ResultTable 1 }
+
+PrvtSaaTestY1564ResultEntry ::= SEQUENCE {
+    prvtSaaTestY1564ResultIndex             Unsigned32,
+    prvtSaaTestY1564ResultStep              Unsigned32,
+    prvtSaaTestY1564ResultPdu               Unsigned32,
+    prvtSaaTestY1564ResultFrameloss         OCTET STRING,
+    prvtSaaTestY1564ResultThroughput        OCTET STRING,
+    prvtSaaTestY1564ResultNetThroughput     OCTET STRING,
+    prvtSaaTestY1564ResultFrameDelay        OCTET STRING,
+    prvtSaaTestY1564ResultStatus            OCTET STRING
+}
+
+prvtSaaTestY1564ResultIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SAA y1564 test results table index."
+    ::= { prvtSaaTestY1564ResultEntry 1 }
+
+prvtSaaTestY1564ResultStep OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SAA y1564 test results table test step/stage."
+    ::= { prvtSaaTestY1564ResultEntry 2 }
+
+prvtSaaTestY1564ResultPdu OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SAA y1564 test results table pdu size"
+    ::= { prvtSaaTestY1564ResultEntry 3 }
+
+prvtSaaTestY1564ResultFrameloss OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Frame loss of the SAA Y1564 test measured in 0.001 of a percent"
+    ::= { prvtSaaTestY1564ResultEntry 4 }
+
+prvtSaaTestY1564ResultThroughput OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Throughput of the SAA Y1564 test measured in Kbps"
+    ::= { prvtSaaTestY1564ResultEntry 5 }
+
+prvtSaaTestY1564ResultNetThroughput OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The actual throughput of the SAA Y1564 test
+         containing only user data. It is measured in Kbps."
+    ::= { prvtSaaTestY1564ResultEntry 6 }
+
+prvtSaaTestY1564ResultFrameDelay OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Average Delay"
+    ::= { prvtSaaTestY1564ResultEntry 7 }
+
+prvtSaaTestY1564ResultStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status of the test"
+    ::= { prvtSaaTestY1564ResultEntry 9 }
+
+prvtSaaTestY1731SlmResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaTestY1731SlmResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains SAA results for Y1731-slm tests."
+    ::= { prvtSaaTestResult 4 }
+
+prvtSaaTestY1731SlmResultEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaTestY1731SlmResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Y.1731-slm test result table"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner, 
+                  prvtSaaTestY1731SlmResultIndex }
+    ::= { prvtSaaTestY1731SlmResultTable 1 }
+
+PrvtSaaTestY1731SlmResultEntry ::= SEQUENCE {
+    prvtSaaTestY1731SlmResultIndex                  Unsigned32,
+    prvtSaaTestY1731SlmResultMep                    Unsigned32,
+    prvtSaaTestY1731SlmResultDelayNearEnd           Unsigned32,
+    prvtSaaTestY1731SlmResultDelayFarEnd            Unsigned32,
+    prvtSaaTestY1731SlmResultJitterNearEnd          Unsigned32,
+    prvtSaaTestY1731SlmResultJitterFarEnd           Unsigned32,
+    prvtSaaTestY1731SlmResultFrameLossNearEnd       Unsigned32,
+    prvtSaaTestY1731SlmResultFrameLossFarEnd        Unsigned32,
+    prvtSaaTestY1731SlmResultFramesSentNearEnd      Counter32,
+    prvtSaaTestY1731SlmResultFramesSentFarEnd       Counter32,
+    prvtSaaTestY1731SlmResultFramesReceivedNearEnd  Counter32,
+    prvtSaaTestY1731SlmResultFramesReceivedFarEnd   Counter32,
+    prvtSaaTestY1731SlmResultCompletionTime         Unsigned32,
+    prvtSaaY1731SlmTestEpsSwitchover                Unsigned32
+}
+
+prvtSaaTestY1731SlmResultIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SAA Y1731-slm test results table index"
+    ::= { prvtSaaTestY1731SlmResultEntry 1 }
+
+prvtSaaTestY1731SlmResultMep OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Mep id"
+    ::= { prvtSaaTestY1731SlmResultEntry 2 }
+
+prvtSaaTestY1731SlmResultDelayNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end delay result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731SlmResultEntry 3 }
+
+prvtSaaTestY1731SlmResultDelayFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end delay result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731SlmResultEntry 4 }
+
+prvtSaaTestY1731SlmResultJitterNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end jitter result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731SlmResultEntry 5 }
+
+prvtSaaTestY1731SlmResultJitterFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end jitter result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731SlmResultEntry 6 }
+
+prvtSaaTestY1731SlmResultFrameLossNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end frame-loss result in 0.0000001 of a percent"
+    ::= { prvtSaaTestY1731SlmResultEntry 7 }
+
+prvtSaaTestY1731SlmResultFrameLossFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end frame-loss result in 0.0000001 of a percent"
+    ::= { prvtSaaTestY1731SlmResultEntry 8 }
+
+prvtSaaTestY1731SlmResultFramesSentNearEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end sent frames"
+    ::= { prvtSaaTestY1731SlmResultEntry 9 }
+
+prvtSaaTestY1731SlmResultFramesSentFarEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end sent frames"
+    ::= { prvtSaaTestY1731SlmResultEntry 10 }
+
+prvtSaaTestY1731SlmResultFramesReceivedNearEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Near end received frames"
+    ::= { prvtSaaTestY1731SlmResultEntry 11 }
+
+prvtSaaTestY1731SlmResultFramesReceivedFarEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Far end received frames"
+    ::= { prvtSaaTestY1731SlmResultEntry 12 }
+
+prvtSaaTestY1731SlmResultCompletionTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Completion time for the SAA Y1731 PM test (format is unix time)."
+    ::= { prvtSaaTestY1731SlmResultEntry 13 }
+
+prvtSaaY1731SlmTestEpsSwitchover OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Marks if eps switchover occured."
+    ::= { prvtSaaTestY1731SlmResultEntry 14 }
+
+prvtSaaY1731NotificationTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaY1731NotificationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table holds notification objects for Y1731 tests"
+    ::= { prvtSaaObjects 4 }
+
+prvtSaaY1731NotificationEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaY1731NotificationEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtSaaY1731NotificationTable"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner, prvtSaaProfileName, 
+                  prvtSaaY1731NotificationId }
+    ::= { prvtSaaY1731NotificationTable 1 }
+
+PrvtSaaY1731NotificationEntry ::= SEQUENCE {
+    prvtSaaY1731NotificationId                      Unsigned32,
+    prvtSaaY1731NotificationDelayThresholdNE        OCTET STRING,
+    prvtSaaY1731NotificationDelayCurrentNE          OCTET STRING,
+    prvtSaaY1731NotificationDelayThresholdFE        OCTET STRING,
+    prvtSaaY1731NotificationDelayCurrentFE          OCTET STRING,
+    prvtSaaY1731NotificationJitterThresholdNE       OCTET STRING,
+    prvtSaaY1731NotificationJitterCurrentNE         OCTET STRING,
+    prvtSaaY1731NotificationJitterThresholdFE       OCTET STRING,
+    prvtSaaY1731NotificationJitterCurrentFE         OCTET STRING,
+    prvtSaaY1731NotificationFramelossThresholdNE    OCTET STRING,
+    prvtSaaY1731NotificationFramelossCurrentNE      OCTET STRING,
+    prvtSaaY1731NotificationFramelossThresholdFE    OCTET STRING,
+    prvtSaaY1731NotificationFramelossCurrentFE      OCTET STRING
+}
+
+prvtSaaY1731NotificationId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table index"
+    ::= { prvtSaaY1731NotificationEntry 1 }
+
+prvtSaaY1731NotificationDelayThresholdNE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 2 }
+
+prvtSaaY1731NotificationDelayCurrentNE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 3 }
+
+prvtSaaY1731NotificationDelayThresholdFE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 4 }
+
+prvtSaaY1731NotificationDelayCurrentFE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 5 }
+
+prvtSaaY1731NotificationJitterThresholdNE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 6 }
+
+prvtSaaY1731NotificationJitterCurrentNE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 7 }
+
+prvtSaaY1731NotificationJitterThresholdFE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 8 }
+
+prvtSaaY1731NotificationJitterCurrentFE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 9 }
+
+prvtSaaY1731NotificationFramelossThresholdNE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 10 }
+
+prvtSaaY1731NotificationFramelossCurrentNE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 11 }
+
+prvtSaaY1731NotificationFramelossThresholdFE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 12 }
+
+prvtSaaY1731NotificationFramelossCurrentFE OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  accessible-for-notify
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtSaaY1731NotificationEntry 13 }
+
+prvtSaaLastTestResult OBJECT IDENTIFIER
+    ::= { prvtSaaObjects 5 }
+
+prvtSaaTestY1731LastResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaTestY1731LastResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains last SAA results for Y1731 tests."
+    ::= { prvtSaaLastTestResult 1 }
+
+prvtSaaTestY1731LastResultEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaTestY1731LastResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Y.1731 test last result table"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner }
+    ::= { prvtSaaTestY1731LastResultTable 1 }
+
+PrvtSaaTestY1731LastResultEntry ::= SEQUENCE {
+    prvtSaaTestY1731LastResultIndex                     Unsigned32,
+    prvtSaaTestY1731LastResultMep                       Unsigned32,
+    prvtSaaTestY1731LastResultDelayNearEnd              Unsigned32,
+    prvtSaaTestY1731LastResultDelayFarEnd               Unsigned32,
+    prvtSaaTestY1731LastResultJitterNearEnd             Unsigned32,
+    prvtSaaTestY1731LastResultJitterFarEnd              Unsigned32,
+    prvtSaaTestY1731LastResultFrameLossNearEnd          Unsigned32,
+    prvtSaaTestY1731LastResultFrameLossFarEnd           Unsigned32,
+    prvtSaaTestY1731LastResultFramesSentNearEnd         Counter32,
+    prvtSaaTestY1731LastResultFramesSentFarEnd          Counter32,
+    prvtSaaTestY1731LastResultFramesReceivedNearEnd     Counter32,
+    prvtSaaTestY1731LastResultFramesReceivedFarEnd      Counter32,
+    prvtSaaTestY1731LastResultFramesPacketSend          Counter32,
+    prvtSaaTestY1731LastResultTimeouts                  Unsigned32,
+    prvtSaaTestY1731LastResultErrors                    Unsigned32,
+    prvtSaaTestY1731LastResultCompletionTime            Unsigned32,
+    prvtSaaTestY1731LastResultEpsSwitchover             Unsigned32
+}
+
+prvtSaaTestY1731LastResultIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "SAA Y1731 test last results table index"
+    ::= { prvtSaaTestY1731LastResultEntry 1 }
+
+prvtSaaTestY1731LastResultMep OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Mep id"
+    ::= { prvtSaaTestY1731LastResultEntry 2 }
+
+prvtSaaTestY1731LastResultDelayNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end delay result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731LastResultEntry 3 }
+
+prvtSaaTestY1731LastResultDelayFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end delay result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731LastResultEntry 4 }
+
+prvtSaaTestY1731LastResultJitterNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end jitter result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731LastResultEntry 5 }
+
+prvtSaaTestY1731LastResultJitterFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end jitter result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731LastResultEntry 6 }
+
+prvtSaaTestY1731LastResultFrameLossNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end frame-loss result in 0.001 of a percent"
+    ::= { prvtSaaTestY1731LastResultEntry 7 }
+
+prvtSaaTestY1731LastResultFrameLossFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end frame-loss result in 0.001 of a percent"
+    ::= { prvtSaaTestY1731LastResultEntry 8 }
+
+prvtSaaTestY1731LastResultFramesSentNearEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end sent frames"
+    ::= { prvtSaaTestY1731LastResultEntry 9 }
+
+prvtSaaTestY1731LastResultFramesSentFarEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end sent frames"
+    ::= { prvtSaaTestY1731LastResultEntry 10 }
+
+prvtSaaTestY1731LastResultFramesReceivedNearEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end received frames"
+    ::= { prvtSaaTestY1731LastResultEntry 11 }
+
+prvtSaaTestY1731LastResultFramesReceivedFarEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end received frames"
+    ::= { prvtSaaTestY1731LastResultEntry 12 }
+
+prvtSaaTestY1731LastResultFramesPacketSend OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last sent packets"
+    ::= { prvtSaaTestY1731LastResultEntry 13 }
+
+prvtSaaTestY1731LastResultTimeouts OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last number of timeouts for the SAA Y1731 Pm test"
+    ::= { prvtSaaTestY1731LastResultEntry 14 }
+
+prvtSaaTestY1731LastResultErrors OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last number of errors for the SAA Y1731 Pm test"
+    ::= { prvtSaaTestY1731LastResultEntry 15 }
+
+prvtSaaTestY1731LastResultCompletionTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last completion time for the SAA Y1731 PM test (format is unix time)."
+    ::= { prvtSaaTestY1731LastResultEntry 16 }
+
+prvtSaaTestY1731LastResultEpsSwitchover OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Marks if eps switchover occured."
+    ::= { prvtSaaTestY1731LastResultEntry 17 }
+
+prvtSaaTestY1731SlmLastResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSaaTestY1731SlmLastResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains SAA results for Last Y1731-slm test."
+    ::= { prvtSaaLastTestResult 2 }
+
+prvtSaaTestY1731SlmLastResultEntry OBJECT-TYPE
+    SYNTAX      PrvtSaaTestY1731SlmLastResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Y.1731-slm test last result table"
+    INDEX       { prvtSaaTestName, prvtSaaTestOwner }
+    ::= { prvtSaaTestY1731SlmLastResultTable 1 }
+
+PrvtSaaTestY1731SlmLastResultEntry ::= SEQUENCE {
+    prvtSaaTestY1731SlmLastResultIndex                  Unsigned32,
+    prvtSaaTestY1731SlmLastResultMep                    Unsigned32,
+    prvtSaaTestY1731SlmLastResultDelayNearEnd           Unsigned32,
+    prvtSaaTestY1731SlmLastResultDelayFarEnd            Unsigned32,
+    prvtSaaTestY1731SlmLastResultJitterNearEnd          Unsigned32,
+    prvtSaaTestY1731SlmLastResultJitterFarEnd           Unsigned32,
+    prvtSaaTestY1731SlmLastResultFrameLossNearEnd       Unsigned32,
+    prvtSaaTestY1731SlmLastResultFrameLossFarEnd        Unsigned32,
+    prvtSaaTestY1731SlmLastResultFramesSentNearEnd      Counter32,
+    prvtSaaTestY1731SlmLastResultFramesSentFarEnd       Counter32,
+    prvtSaaTestY1731SlmLastResultFramesReceivedNearEnd  Counter32,
+    prvtSaaTestY1731SlmLastResultFramesReceivedFarEnd   Counter32,
+    prvtSaaTestY1731SlmLastResultCompletionTime         Unsigned32,
+    prvtSaaTestY1731SlmLastResultEpsSwitchover          Unsigned32
+}
+
+prvtSaaTestY1731SlmLastResultIndex OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "SAA Y1731-slm test last results table index"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 1 }
+
+prvtSaaTestY1731SlmLastResultMep OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Mep id"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 2 }
+
+prvtSaaTestY1731SlmLastResultDelayNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end delay result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 3 }
+
+prvtSaaTestY1731SlmLastResultDelayFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end delay result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 4 }
+
+prvtSaaTestY1731SlmLastResultJitterNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end jitter result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 5 }
+
+prvtSaaTestY1731SlmLastResultJitterFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end jitter result in 0.001 of a microsecond"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 6 }
+
+prvtSaaTestY1731SlmLastResultFrameLossNearEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end frame-loss result in 0.0000001 of a percent"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 7 }
+
+prvtSaaTestY1731SlmLastResultFrameLossFarEnd OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end frame-loss result in 0.0000001 of a percent"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 8 }
+
+prvtSaaTestY1731SlmLastResultFramesSentNearEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end sent frames"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 9 }
+
+prvtSaaTestY1731SlmLastResultFramesSentFarEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end sent frames"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 10 }
+
+prvtSaaTestY1731SlmLastResultFramesReceivedNearEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last near end received frames"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 11 }
+
+prvtSaaTestY1731SlmLastResultFramesReceivedFarEnd OBJECT-TYPE
+    SYNTAX      Counter32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last far end received frames"
+    ::= { prvtSaaTestY1731SlmLastResultEntry 12 }
+
+prvtSaaTestY1731SlmLastResultCompletionTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last completion time for the SAA Y1731 PM test (format is unix time)."
+    ::= { prvtSaaTestY1731SlmLastResultEntry 13 }
+
+prvtSaaTestY1731SlmLastResultEpsSwitchover OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Marks if eps switchover occured."
+    ::= { prvtSaaTestY1731SlmLastResultEntry 14 }
+
+prvtSaaRfc2544ProbeFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestRfc2544ResultStatus, prvtSaaTestRfc2544Cir, 
+                  prvtSaaTestRfc2544ResultFrameLoss }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever a SAA probe
+         on a specific test fails."
+    ::= { prvtSaaNotifications 1 }
+
+prvtSaaRfc2544ProbeSuccess NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestRfc2544ResultStatus, prvtSaaTestRfc2544Cir, 
+                  prvtSaaTestRfc2544ResultFrameLoss }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever a SAA probe
+         on a specific test finishes with success."
+    ::= { prvtSaaNotifications 2 }
+
+prvtSaaTestRfc2544Finished NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestRfc2544ResultStatus }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever a SAA RFC2544 test is finished"
+    ::= { prvtSaaNotifications 3 }
+
+prvtSaaY1731DelayNearEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1731ResultDelayNearEnd, 
+                  prvtSaaProfileY1731DelayNearEnd }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the near end delay
+         on a SAA Y1731 test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 4 }
+
+prvtSaaY1731DelayFarEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1731ResultDelayFarEnd, 
+                  prvtSaaProfileY1731DelayFarEnd }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the far end delay
+         on a SAA Y1731 test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 5 }
+
+prvtSaaY1731JitterNearEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1731ResultJitterNearEnd, 
+                  prvtSaaProfileY1731JitterNearEnd }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the near end jitter
+         on a SAA Y1731 test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 6 }
+
+prvtSaaY1731JitterFarEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1731ResultJitterFarEnd, 
+                  prvtSaaProfileY1731JitterFarEnd }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the far end jitter
+         on a SAA Y1731 test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 7 }
+
+prvtSaaY1731FrLossNearEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1731ResultFrameLossNearEnd, 
+                  prvtSaaProfileY1731FrameLossNearEnd }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the near end frameloss
+         on a SAA Y1731 test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 8 }
+
+prvtSaaY1731FrLossFEThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1731ResultFrameLossFarEnd, 
+                  prvtSaaProfileY1731FrameLossFarEnd }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the far end frameloss
+         on a SAA Y1731 test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 9 }
+
+prvtSaaY1564ProbeFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1564ResultStatus, 
+                  prvtSaaTestY1564ResultThroughput, 
+                  prvtSaaTestY1564ResultFrameloss, 
+                  prvtSaaTestY1564ResultFrameDelay }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever a SAA probe
+         on a specific test step fails."
+    ::= { prvtSaaNotifications 10 }
+
+prvtSaaY1564ProbeSuccess NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1564ResultStatus, 
+                  prvtSaaTestY1564ResultThroughput, 
+                  prvtSaaTestY1564ResultFrameloss, 
+                  prvtSaaTestY1564ResultFrameDelay }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever a SAA probe
+         on a specific test step finishes with success."
+    ::= { prvtSaaNotifications 11 }
+
+prvtSaaY1564TestFinished NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1564ResultStatus }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever a SAA Y1564 test is finished"
+    ::= { prvtSaaNotifications 12 }
+
+prvtSaaY1564DelayThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1564ResultFrameDelay }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever a delay on a SAA Y1564
+         test will surpass the defined threshold."
+    ::= { prvtSaaNotifications 13 }
+
+prvtSaaY1564FramelossThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaTestY1564ResultFrameloss }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever a frameloss on a SAA Y1564
+         test will surpass the defined threshold."
+    ::= { prvtSaaNotifications 14 }
+
+prvtSaaY1731slmDelayNearEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaY1731NotificationDelayCurrentNE, 
+                  prvtSaaY1731NotificationDelayThresholdNE }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the near end delay
+         on a SAA Y1731 SLM test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 15 }
+
+prvtSaaY1731slmDelayFarEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaY1731NotificationDelayCurrentFE, 
+                  prvtSaaY1731NotificationDelayThresholdFE }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the far end delay
+         on a SAA Y1731 SLM test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 16 }
+
+prvtSaaY1731slmJitterNearEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaY1731NotificationJitterCurrentNE, 
+                  prvtSaaY1731NotificationJitterThresholdNE }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the near end jitter
+         on a SAA Y1731 SLM test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 17 }
+
+prvtSaaY1731slmJitterFarEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaY1731NotificationJitterCurrentFE, 
+                  prvtSaaY1731NotificationJitterThresholdFE }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the far end jitter
+         on a SAA Y1731 SLM test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 18 }
+
+prvtSaaY1731slmFramelossNearEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaY1731NotificationFramelossCurrentNE, 
+                  prvtSaaY1731NotificationFramelossThresholdNE }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the near end frameloss
+         on a SAA Y1731 SLM test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 19 }
+
+prvtSaaY1731slmFramelossFarEndThreshold NOTIFICATION-TYPE
+    OBJECTS     { prvtSaaY1731NotificationFramelossCurrentFE, 
+                  prvtSaaY1731NotificationFramelossThresholdFE }
+    STATUS      current
+    DESCRIPTION 
+        "This trap should be sent whenever the far end frameloss
+         on a SAA Y1731 SLM test will surpass one of the 2 defined
+         thresholds."
+    ::= { prvtSaaNotifications 20 }
+
+END -- end of module PRVT-SAA-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SERV-MIB b/MIBS/telco-systems/binox/PRVT-SERV-MIB
new file mode 100644
index 0000000..c82d409
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SERV-MIB
@@ -0,0 +1,1151 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SERV-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SERV-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex
+        FROM IF-MIB
+    serviceAccessSwitch
+        FROM PRVT-SWITCH-MIB
+    Integer32, IpAddress, MODULE-IDENTITY, NOTIFICATION-TYPE, 
+    OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    MacAddress, RowStatus, TimeStamp, TruthValue
+        FROM SNMPv2-TC;
+
+prvtServicesMIB MODULE-IDENTITY
+    LAST-UPDATED "201307150000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This document is the SNMP MIB module to manage and provision
+         the various services of the system."
+    REVISION    "201307150000Z"
+    DESCRIPTION 
+        "Added support for TLS ethertype"
+    REVISION    "201302040000Z"
+    DESCRIPTION 
+        "Update description for sapEncapValue."
+    REVISION    "201110190000Z"
+    DESCRIPTION 
+        "Change serviceAdminStatus, sapAdminStatus, sdpAdminStatus
+         enumeration. Now down (1), up (2)."
+    REVISION    "200901190000Z"
+    DESCRIPTION 
+        "Sync to internal implementation"
+    ::= { serviceAccessSwitch 2 }
+
+
+prvtServicesMIBNotifications OBJECT IDENTIFIER
+    ::= { prvtServicesMIB 0 }
+
+prvtServicesMIBObjects OBJECT IDENTIFIER
+    ::= { prvtServicesMIB 1 }
+
+customerTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF CustomerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains customer information."
+    ::= { prvtServicesMIBObjects 1 }
+
+customerEntry OBJECT-TYPE
+    SYNTAX      CustomerEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific customer."
+    INDEX       { customerName }
+    ::= { customerTable 1 }
+
+CustomerEntry ::= SEQUENCE {
+    customerName        OCTET STRING,
+    customerRowStatus   RowStatus,
+    customerContact     OCTET STRING,
+    customerPhone       OCTET STRING
+}
+
+customerName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..29))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The name of this customer."
+    ::= { customerEntry 1 }
+
+customerRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object indicates the status of this row."
+    ::= { customerEntry 2 }
+
+customerContact OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..29))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The name of the primary contact person for
+         this customer."
+    ::= { customerEntry 3 }
+
+customerPhone OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..29))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The phone/pager number used to reach the
+         primary contact person."
+    ::= { customerEntry 4 }
+
+serviceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ServiceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains basic service information."
+    ::= { prvtServicesMIBObjects 2 }
+
+serviceEntry OBJECT-TYPE
+    SYNTAX      ServiceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Basic information about a specific service."
+    INDEX       { serviceId }
+    ::= { serviceTable 1 }
+
+ServiceEntry ::= SEQUENCE {
+    serviceId                       Unsigned32,
+    serviceRowStatus                RowStatus,
+    serviceVpnId                    Unsigned32,
+    serviceType                     INTEGER,
+    serviceDescription              OCTET STRING,
+    serviceMtu                      Integer32,
+    serviceAdminStatus              INTEGER,
+    serviceOperStatus               INTEGER,
+    serviceNumSaps                  Integer32,
+    serviceNumSdps                  Integer32,
+    serviceLastMgmtChange           TimeStamp,
+    serviceEnableSecureSaps         TruthValue,
+    serviceRevertTimer              Unsigned32,
+    servicePwRedundOperModeMesh     INTEGER,
+    servicePwRedundOperModeSpoke    INTEGER,
+    serviceCustName                 OCTET STRING,
+    serviceVlanEtherType            INTEGER,
+    serviceBackupVlanEtherType      INTEGER,
+    serviceVlanAction               INTEGER
+}
+
+serviceId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967294)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The service ID."
+    ::= { serviceEntry 1 }
+
+serviceRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object indicates the status of this row. The
+         values supported during a set operation are 
+         createAndWait(5), destroy(6), active(1), notInSertvice(2). 
+         Service can not be deleted or changed to notInService if there are
+         SDPs/SAPs belonging to it. "
+    ::= { serviceEntry 2 }
+
+serviceVpnId OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object specifies the ID used by Service Provider(SP). 
+         It will have different format according to the type of 
+         service. 
+         This filed is mandatory. If all mandatory fields are 
+         set, the row status object is automatically changed from notReady(3)
+         to notInService(2) state.
+         For TLS services must be the same as sdpBindVlanTag."
+    ::= { serviceEntry 3 }
+
+serviceType OBJECT-TYPE
+    SYNTAX      INTEGER { epipe(1), p3pipe(2), tls(3), vprn(4), ies(5), 
+                    mirror(6), apipe(7), fpipe(8), vpws(9), vplsPe(10), 
+                    vplsMtu(11), dot1q(12) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The service type: e.g. EtherPipe, TLS, etc. Currently only 
+         vpls-pe(11), vpls-mtu(12), vpws-pe(9) and vpws-mtu(10) types 
+         are supported. 
+         This field is mandatory."
+    ::= { serviceEntry 4 }
+
+serviceDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..29))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Generic information about this service."
+    ::= { serviceEntry 5 }
+
+serviceMtu OBJECT-TYPE
+    SYNTAX      Integer32 (512..9216)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Not supported object"
+    ::= { serviceEntry 6 }
+
+serviceAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { down(1), up(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administrative state of the service."
+    ::= { serviceEntry 7 }
+
+serviceOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operating state of this service."
+    ::= { serviceEntry 8 }
+
+serviceNumSaps OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of SAPs defined on this service."
+    ::= { serviceEntry 9 }
+
+serviceNumSdps OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of SDPs bound to this service."
+    ::= { serviceEntry 10 }
+
+serviceLastMgmtChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value of sysUpTime at the time of the
+         most recent management-initiated change to
+         this service."
+    ::= { serviceEntry 11 }
+
+serviceEnableSecureSaps OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used to configure the SAPs to forward only traffic from the uplink ports."
+    ::= { serviceEntry 13 }
+
+serviceRevertTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..7200)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "serviceRevertTimer"
+    ::= { serviceEntry 14 }
+
+servicePwRedundOperModeMesh OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), independent(1), master(2), slave(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "servicePwRedundOperModeMesh"
+    ::= { serviceEntry 15 }
+
+servicePwRedundOperModeSpoke OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), independent(1), master(2), slave(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "servicePwRedundOperModeSpoke"
+    ::= { serviceEntry 16 }
+
+serviceCustName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..29))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The name of the customer this service belongs to."
+    ::= { serviceEntry 17 }
+
+serviceVlanEtherType OBJECT-TYPE
+    SYNTAX      INTEGER { vlan(33024), dot1ad(34984), qinq(37120) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ethertype for service vlan."
+    ::= { serviceEntry 18 }
+
+serviceBackupVlanEtherType OBJECT-TYPE
+    SYNTAX      INTEGER { vlan(33024), dot1ad(34984), qinq(37120) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ethertype for service backup vlan."
+    ::= { serviceEntry 19 }
+
+serviceVlanAction OBJECT-TYPE
+    SYNTAX      INTEGER { replace(0), add(1) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Vlan action for vlan services"
+    ::= { serviceEntry 20 }
+
+sapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains basic SAP information."
+    ::= { prvtServicesMIBObjects 3 }
+
+sapEntry OBJECT-TYPE
+    SYNTAX      SapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific SAP."
+    INDEX       { serviceId, sapPortId, sapEncapValue }
+    ::= { sapTable 1 }
+
+SapEntry ::= SEQUENCE {
+    sapPortId                           Integer32,
+    sapEncapValue                       Unsigned32,
+    sapRowStatus                        RowStatus,
+    sapType                             INTEGER,
+    sapDescription                      OCTET STRING,
+    sapAdminStatus                      INTEGER,
+    sapOperStatus                       INTEGER,
+    sapLastMgmtChange                   TimeStamp,
+    sapOperFlags                        BITS,
+    sapCustMultSvcSiteName              OCTET STRING,
+    sapIngressQosPolicyId               Unsigned32,
+    sapEgressQosPolicyId                Unsigned32,
+    sapIngressQosSchedulerPolicy        OCTET STRING,
+    sapEgressQosSchedulerPolicy         OCTET STRING,
+    sapLearnMode                        INTEGER,
+    sapLearnEnable                      TruthValue,
+    sapUntaggedMode                     TruthValue,
+    sapProfileName                      OCTET STRING,
+    sapCurrentMacCount                  Unsigned32,
+    sapMacLearningProfileState          INTEGER,
+    prvtSapEventPropagationProfile      OCTET STRING,
+    prvtTlsSapEventPropagationProfile   OCTET STRING
+}
+
+sapPortId OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ID of the access port where this SAP
+         is defined."
+    ::= { sapEntry 1 }
+
+sapEncapValue OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The value of the label used to identify this
+         SAP on the access port specified by sapPortId. Value 4095
+         is used for unqualified SAP, value 4096 is used for untagged
+         SAP."
+    ::= { sapEntry 2 }
+
+sapRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object indicates the status of this row.
+         Saps can be deleted any time."
+    ::= { sapEntry 3 }
+
+sapType OBJECT-TYPE
+    SYNTAX      INTEGER { epipe(1), p3pipe(2), tls(3), vprn(4), ies(5), 
+                    mirror(6), apipe(7), fpipe(8), vpws(9), vplsPe(10), 
+                    vplsMtu(11), dot1q(12) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object indicates the type of service where
+         this SAP is defined."
+    ::= { sapEntry 4 }
+
+sapDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..29))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Generic information about this SAP."
+    ::= { sapEntry 5 }
+
+sapAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { down(1), up(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administrative state of the sap"
+    ::= { sapEntry 6 }
+
+sapOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2), ingressQosMismatch(3), 
+                    egressQosMismatch(4), svcAdminDown(5), 
+                    portMtuTooSmall(6) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operating state of this SAP, showing also the reason for the
+         current operation state
+         
+         Values ingressQosMismatch(3),egressQosMismatch(4),svcAdminDown(5) 
+         and portMtuTooSmall(6) are not supported"
+    ::= { sapEntry 7 }
+
+sapLastMgmtChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value of sysUpTime at the time of the
+         most recent management-initiated change to
+         this SAP."
+    ::= { sapEntry 8 }
+
+sapOperFlags OBJECT-TYPE
+    SYNTAX      BITS { sapAdminDown(0), svcAdminDown(1), portOperDown(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object specifies all the conditions that
+         affect the operating status of this SAP."
+    ::= { sapEntry 9 }
+
+sapCustMultSvcSiteName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..9))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The value of this object, when not null, indicates
+         the Multi-Service Site this SAP is a member of. This
+         information is used to configure the ingress and
+         egress QoS schedulers for this SAP."
+    ::= { sapEntry 11 }
+
+sapIngressQosPolicyId OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The row index in the tSapIngressTable
+         corresponding to this ingress QoS
+         policy, or zero if no policy is specified."
+    ::= { sapEntry 12 }
+
+sapEgressQosPolicyId OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The row index in the tSapEgressTable
+         corresponding to this egress QoS policy,
+         or zero if no policy is specified."
+    ::= { sapEntry 13 }
+
+sapIngressQosSchedulerPolicy OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object can be set only when sapCustMultSvcSite
+         is null. It indicates the ingress QoS scheduler for
+         this SAP."
+    ::= { sapEntry 14 }
+
+sapEgressQosSchedulerPolicy OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object can be set only when sapCustMultSvcSite
+         is null. It indicates the egress QoS scheduler for
+         this SAP."
+    ::= { sapEntry 15 }
+
+sapLearnMode OBJECT-TYPE
+    SYNTAX      INTEGER { qualified(1), unqualified(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sap learning mode. Currently supported as read-only."
+    ::= { sapEntry 16 }
+
+sapLearnEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sap learning enable."
+    ::= { sapEntry 17 }
+
+sapUntaggedMode OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sap untagged mode."
+    ::= { sapEntry 18 }
+
+sapProfileName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..30))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Mac Learning profile name to apply."
+    ::= { sapEntry 19 }
+
+sapCurrentMacCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Current count of MAC Addresses
+         learnt on sapProfileName profile."
+    ::= { sapEntry 20 }
+
+sapMacLearningProfileState OBJECT-TYPE
+    SYNTAX      INTEGER { noViolation(1), watermarkReached(2), 
+                    maxMacCountReached(3), errorState(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "State of the secured entry."
+    ::= { sapEntry 21 }
+
+prvtSapEventPropagationProfile OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Event propagation profile name, applied on this service SAP."
+    ::= { sapEntry 22 }
+
+prvtTlsSapEventPropagationProfile OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Event propagation profile name, applied on this service TLS SAP."
+    ::= { sapEntry 23 }
+
+sdpNextFreeId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The next available value for sdpId."
+    ::= { prvtServicesMIBObjects 4 }
+
+sdpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains SDP information.
+         Available sdpId can be obtained from sdpNextFreeId."
+    ::= { prvtServicesMIBObjects 5 }
+
+sdpEntry OBJECT-TYPE
+    SYNTAX      SdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information about a specific SDP."
+    INDEX       { serviceId, sdpId }
+    ::= { sdpTable 1 }
+
+SdpEntry ::= SEQUENCE {
+    sdpId                       Unsigned32,
+    sdpRowStatus                RowStatus,
+    sdpDelivery                 INTEGER,
+    sdpFarEndIpAddress          IpAddress,
+    sdpDescription              OCTET STRING,
+    sdpLabelSignaling           INTEGER,
+    sdpAdminStatus              INTEGER,
+    sdpOperStatus               INTEGER,
+    sdpLastMgmtChange           TimeStamp,
+    sdpLdpEnabled               TruthValue,
+    sdpOperFlags                BITS,
+    sdpAdminIngressLabel        Unsigned32,
+    sdpAdminEgressLabel         Unsigned32,
+    sdpOutInterface             InterfaceIndex,
+    sdpGroupIdentifier          Unsigned32,
+    sdpTransportTunnelName      OCTET STRING,
+    sdpVCType                   INTEGER,
+    sdpType                     INTEGER,
+    sdpMtu                      Integer32,
+    sdpBindVlanTag              Unsigned32,
+    sdpLearnEnable              TruthValue,
+    sdpSecuredEnable            TruthValue,
+    sdpSignalPwStatus           TruthValue,
+    sdpPwRedundancyEnable       TruthValue,
+    sdpPwPrecedence             Integer32,
+    sdpPwActivate               TruthValue,
+    sdpDynamicVcIngressLabel    Unsigned32,
+    sdpDynamicVcEgressLabel     Unsigned32
+}
+
+sdpId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "SDP identifier."
+    ::= { sdpEntry 1 }
+
+sdpRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object indicates the status of this row. 
+         The values supported during a set operation are 
+         createAndWait(5), destroy(6), active(1), notInSertvice(2)."
+    ::= { sdpEntry 2 }
+
+sdpDelivery OBJECT-TYPE
+    SYNTAX      INTEGER { gre(1), mpls(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object specifies the type of delivery used
+         by this SDP.
+         NOTE! Currently we support only mpls. The modification 
+         of this obect will be rejected. "
+    ::= { sdpEntry 3 }
+
+sdpFarEndIpAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object specifies the IP address of the
+         remote end of the GRE or MPLS tunnel defined
+         by this SDP. 
+         
+         This field is mandatory. If all mandatory fields are set, the 
+         row status object is automatically changed from notReady(3)
+         to notInService(2) state."
+    ::= { sdpEntry 4 }
+
+sdpDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..29))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Generic information about this SDP."
+    ::= { sdpEntry 5 }
+
+sdpLabelSignaling OBJECT-TYPE
+    SYNTAX      INTEGER { none(1), tldp(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object specifies the signaling protocol
+         used to obtain the ingress and egress labels
+         used in frames transmitted and received on
+         this SDP. When the value of this object is
+         none(1) then the labels are manually assigned
+         at the time the SDP is configured. The
+         value of this object can only be changed while
+         the admin status of the SDP is down(2).
+         
+         This field is mandatory. If all mandatory fields are set, the 
+         row status object is automatically changed from notReady(3)
+         to notInService(2) state"
+    ::= { sdpEntry 6 }
+
+sdpAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { down(1), up(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administrative state of the sdp."
+    ::= { sdpEntry 7 }
+
+sdpOperStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2), goingUp(3), tunnelDown(4), 
+                    transportSelected(5), supressed(6) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The operating state of this SDP. 
+         1. Sdp is up and running.
+         2. Initial state. Entry is inactive.
+         3. Peers are ready to select transport.
+         4. There is no suitable transport.
+         5. SDP is not operational due to local/remote SAP down or remote SDP has no transport.
+         6. Sdp is up and ready to carry user traffic but it is not used at the moment (backup)."
+    ::= { sdpEntry 8 }
+
+sdpLastMgmtChange OBJECT-TYPE
+    SYNTAX      TimeStamp
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The value of sysUpTime at the time of the
+         most recent management-initiated change to
+         this SDP."
+    ::= { sdpEntry 9 }
+
+sdpLdpEnabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "When the value of this object is true(1)
+         the transport LSP's are signalled by LDP,
+         as opposed to being provisioned static or
+         RSVP-signalled LSP's. This object applies
+         only to MPLS SDP's."
+    ::= { sdpEntry 10 }
+
+sdpOperFlags OBJECT-TYPE
+    SYNTAX      BITS { sdpAdminDown(0), signalingSessionDown(1), 
+                    transportTunnelDown(2), invalidEgressInterface(3), 
+                    noSystemIpAddress(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object specifies all the conditions that
+         affect the operating status of this SDP."
+    ::= { sdpEntry 11 }
+
+sdpAdminIngressLabel OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The static MPLS VC label used by the far-end device
+         to send packets to this device in this service via
+         this SDP."
+    ::= { sdpEntry 13 }
+
+sdpAdminEgressLabel OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..4294967295)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The static MPLS VC label used by this device to send
+         packets to the far-end device in this service via
+         this SDP."
+    ::= { sdpEntry 14 }
+
+sdpOutInterface OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is valid only if the type of service is tls(3). 
+         The ifIndex of the desired outbound interface for this SDP.
+         
+         This field is currently not supported. Its modification 
+         will be rejected. 
+         
+         The default value is 0"
+    ::= { sdpEntry 15 }
+
+sdpGroupIdentifier OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object is valid only if the type of service is tls(3). 
+         The Group ID for this SDP. SDP's bound to the same service must have the same Group ID's."
+    ::= { sdpEntry 16 }
+
+sdpTransportTunnelName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Optional transport tunnel name. For the SDP to be operational an entry must exist in 
+         mplsTunnelTable with this name."
+    ::= { sdpEntry 17 }
+
+sdpVCType OBJECT-TYPE
+    SYNTAX      INTEGER { ethernetVlan(4), ethernet(5) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "VC Type of the service."
+    ::= { sdpEntry 18 }
+
+sdpType OBJECT-TYPE
+    SYNTAX      INTEGER { invalidType(0), generic(1), spoke(2), mesh(3), 
+                    hub(4) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The type of this SDP.
+         
+         Currently the only supported sdp types are spoke(2) and mesh(3)
+         
+         This field is mandatory. If serviceType is set to vpls-mtu(12) or vpws-mtu(10), 
+         trying to set sdpType to mesh(3) will be rejected(Wring configuration). 
+         If all mandatory fields are set, the row status object is automatically 
+         changed from notReady(3) to notInService(2) state."
+    ::= { sdpEntry 19 }
+
+sdpMtu OBJECT-TYPE
+    SYNTAX      Integer32 (512..9190)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The largest frame size (in octets) that this
+         SDP can handle"
+    ::= { sdpEntry 20 }
+
+sdpBindVlanTag OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4092)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Outgoing vlan. For TLS services must be the same as serviceVpnId"
+    ::= { sdpEntry 21 }
+
+sdpLearnEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sdp learn."
+    ::= { sdpEntry 22 }
+
+sdpSecuredEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Secured setting to manage split-horizon rules for the SDP."
+    ::= { sdpEntry 23 }
+
+sdpSignalPwStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Sdp signal pw status."
+    ::= { sdpEntry 24 }
+
+sdpPwRedundancyEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "sdpPwRedundancyEnable"
+    ::= { sdpEntry 25 }
+
+sdpPwPrecedence OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Value of this object determines the role of
+         this sdp entry. The entry with highest sdpPwPrecedence acts as
+         primary, all other sdps are backup."
+    ::= { sdpEntry 26 }
+
+sdpPwActivate OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "sdpPwActivate"
+    ::= { sdpEntry 27 }
+
+sdpDynamicVcIngressLabel OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Sdp dynamic vc ingress label."
+    ::= { sdpEntry 28 }
+
+sdpDynamicVcEgressLabel OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Sdp dynamic vc egress label."
+    ::= { sdpEntry 29 }
+
+serviceMacAddressSapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ServiceMacAddressSapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains FDB entries per service and sap."
+    ::= { prvtServicesMIBObjects 7 }
+
+serviceMacAddressSapEntry OBJECT-TYPE
+    SYNTAX      ServiceMacAddressSapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information FDB entries per service and sap."
+    INDEX       { serviceMacAddressSapServiceId, 
+                  serviceMacAddressSapMacAddress, 
+                  serviceMacAddressSapPortId, 
+                  serviceMacAddressSapEncapValue }
+    ::= { serviceMacAddressSapTable 1 }
+
+ServiceMacAddressSapEntry ::= SEQUENCE {
+    serviceMacAddressSapServiceId   Unsigned32,
+    serviceMacAddressSapMacAddress  MacAddress,
+    serviceMacAddressSapPortId      Integer32,
+    serviceMacAddressSapEncapValue  Unsigned32,
+    serviceMacAddressSapRowStatus   RowStatus,
+    serviceMacAddressSapPriority    Integer32
+}
+
+serviceMacAddressSapServiceId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service."
+    ::= { serviceMacAddressSapEntry 1 }
+
+serviceMacAddressSapMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress."
+    ::= { serviceMacAddressSapEntry 2 }
+
+serviceMacAddressSapPortId OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress port id."
+    ::= { serviceMacAddressSapEntry 3 }
+
+serviceMacAddressSapEncapValue OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4095)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress encap value."
+    ::= { serviceMacAddressSapEntry 4 }
+
+serviceMacAddressSapRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress row status."
+    ::= { serviceMacAddressSapEntry 5 }
+
+serviceMacAddressSapPriority OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress priority."
+    ::= { serviceMacAddressSapEntry 6 }
+
+serviceMacAddressSdpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ServiceMacAddressSdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table that contains FDB entries per service and sdp."
+    ::= { prvtServicesMIBObjects 8 }
+
+serviceMacAddressSdpEntry OBJECT-TYPE
+    SYNTAX      ServiceMacAddressSdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Information FDB entries per service and sdp."
+    INDEX       { serviceMacAddressSdpServiceId, 
+                  serviceMacAddressSdpMacAddress, serviceMacAddressSdpId }
+    ::= { serviceMacAddressSdpTable 1 }
+
+ServiceMacAddressSdpEntry ::= SEQUENCE {
+    serviceMacAddressSdpServiceId   Unsigned32,
+    serviceMacAddressSdpMacAddress  MacAddress,
+    serviceMacAddressSdpId          Unsigned32,
+    serviceMacAddressSdpRowStatus   RowStatus,
+    serviceMacAddressSdpPriority    Integer32
+}
+
+serviceMacAddressSdpServiceId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Service Id."
+    ::= { serviceMacAddressSdpEntry 1 }
+
+serviceMacAddressSdpMacAddress OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress."
+    ::= { serviceMacAddressSdpEntry 2 }
+
+serviceMacAddressSdpId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4294967295)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress sdp id."
+    ::= { serviceMacAddressSdpEntry 3 }
+
+serviceMacAddressSdpRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress row status."
+    ::= { serviceMacAddressSdpEntry 4 }
+
+serviceMacAddressSdpPriority OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Static MacAddress priority."
+    ::= { serviceMacAddressSdpEntry 5 }
+
+customerCreated NOTIFICATION-TYPE
+    OBJECTS     { customerName }
+    STATUS      current
+    DESCRIPTION 
+        "This trap is sent when a new row is created
+         in the customerTable."
+    ::= { prvtServicesMIBNotifications 1 }
+
+customerDeleted NOTIFICATION-TYPE
+    OBJECTS     { customerName }
+    STATUS      current
+    DESCRIPTION 
+        "This trap is sent when an existing row is
+         deleted from the customerTable."
+    ::= { prvtServicesMIBNotifications 2 }
+
+serviceCreated NOTIFICATION-TYPE
+    OBJECTS     { serviceId }
+    STATUS      current
+    DESCRIPTION 
+        "This trap is sent when a new row is created
+         in the serviceTable."
+    ::= { prvtServicesMIBNotifications 3 }
+
+serviceDeleted NOTIFICATION-TYPE
+    OBJECTS     { serviceId }
+    STATUS      current
+    DESCRIPTION 
+        "This trap is sent when an existing row is
+         deleted from the serviceTable."
+    ::= { prvtServicesMIBNotifications 4 }
+
+sapCreated NOTIFICATION-TYPE
+    OBJECTS     { serviceId, sapPortId, sapEncapValue }
+    STATUS      current
+    DESCRIPTION 
+        "This trap is sent when a new row is created
+         in the sapTable."
+    ::= { prvtServicesMIBNotifications 5 }
+
+sapDeleted NOTIFICATION-TYPE
+    OBJECTS     { serviceId, sapPortId, sapEncapValue }
+    STATUS      current
+    DESCRIPTION 
+        "This trap is sent when an existing row is
+         deleted from the sapTable."
+    ::= { prvtServicesMIBNotifications 6 }
+
+sdpCreated NOTIFICATION-TYPE
+    OBJECTS     { serviceId, sdpId }
+    STATUS      current
+    DESCRIPTION 
+        "This trap is sent when a new row is created
+         in the sdpTable."
+    ::= { prvtServicesMIBNotifications 7 }
+
+sdpDeleted NOTIFICATION-TYPE
+    OBJECTS     { serviceId, sdpId }
+    STATUS      current
+    DESCRIPTION 
+        "This trap is sent when an existing row is
+         deleted from the sdpTable."
+    ::= { prvtServicesMIBNotifications 8 }
+
+END -- end of module PRVT-SERV-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SPANNING-TREE-MIB b/MIBS/telco-systems/binox/PRVT-SPANNING-TREE-MIB
new file mode 100644
index 0000000..e37bbe9
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SPANNING-TREE-MIB
@@ -0,0 +1,957 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SPANNING-TREE-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SPANNING-TREE-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtSpanningTreeMIB MODULE-IDENTITY
+    LAST-UPDATED "201004060000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The private MIB module for management of the spanning tree and fast ring protocols."
+    REVISION    "201004060000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 107 }
+
+
+PrvtStInstIdTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A spanning tree instance identifier."
+    SYNTAX      Unsigned32 (0..15)
+
+PrvtStInstIdExceptZeroTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A non-zero spanning tree instance identifier."
+    SYNTAX      Unsigned32 (1..15)
+
+PrvtStPortIdTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "x"
+    STATUS      current
+    DESCRIPTION 
+        "The port identifier."
+    SYNTAX      Unsigned32 (0..65535)
+
+PrvtStBridgeIdTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "2d.1x:1x:1x:1x:1x:1x"
+    STATUS      current
+    DESCRIPTION 
+        "The bridge identifier, as used in the Spanning Tree
+         Protocol, to uniquely identify a bridge."
+    SYNTAX      OCTET STRING (SIZE(8))
+
+PrvtStLearnModeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Learn mode."
+    SYNTAX      INTEGER { none(0), standard(1), temporary-disabled(2) }
+
+PrvtStLinkTypeTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Link types."
+    SYNTAX      INTEGER { auto(1), pointToPoint(2), shared(3) }
+
+PrvtStPortRoleTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Possible port roles."
+    SYNTAX      INTEGER { disabled(1), root(2), designated(3), 
+                    alternate(4), backup(5), master(6) }
+
+PrvtStPortStateTC ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Possible port states."
+    SYNTAX      INTEGER { forward(1), block(2), learn(3) }
+
+PrvtStPortPriorityTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Possible values for port priority.
+         Valid values are multiples of 16."
+    SYNTAX      Unsigned32 (0 | 16 | 32 | 48 | 64 | 80 | 96 | 112 | 128 | 
+                    144 | 160 | 176 | 192 | 208 | 224 | 240)
+
+PrvtStBridgePriorityTC ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Possible values for bridge priority.
+         Valid values are multiples of 4096."
+    SYNTAX      Unsigned32 (0 | 4096 | 8192 | 12288 | 16384 | 20480 | 
+                    24576 | 28672 | 32768 | 36864 | 40960 | 45056 | 
+                    49152 | 53248 | 57344 | 61440)
+
+prvtStNotifications OBJECT IDENTIFIER
+    ::= { prvtSpanningTreeMIB 0 }
+
+prvtStObjects OBJECT IDENTIFIER
+    ::= { prvtSpanningTreeMIB 1 }
+
+prvtStCommon OBJECT IDENTIFIER
+    ::= { prvtStObjects 1 }
+
+prvtStProviderBridgeAddress OBJECT-TYPE
+    SYNTAX      INTEGER { dot1d(0), dot1ad(1) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Chose wich standard - 802.1d or 802.1ad will be used for BPDUs"
+    REFERENCE   
+        "IEEE 802.1ad"
+    ::= { prvtStCommon 1 }
+
+prvtStMaxAge OBJECT-TYPE
+    SYNTAX      Unsigned32 (6..40)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The maximum age, in seconds, of Spanning Tree Protocol
+         information learned from the network on any port
+         before it is discarded.
+         Note that the following relationships are enforced:
+         prvtStMaxAge >= 2 x (prvtStHelloTime + 1)
+         2 x (prvtStForwardDelay - 1) >= prvtStMaxAge"
+    REFERENCE   
+        "IEEE 802.1s clause 13.23.4"
+    ::= { prvtStCommon 2 }
+
+prvtStHelloTime OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..40)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The amount of time, in seconds, between the transmission of
+         Configuration bridge PDUs by this node on any port
+         when it is the root of the spanning tree or trying
+         to become so.
+         Note that the following relationship is enforced:
+         prvtStMaxAge >= 2 x (prvtStHelloTime + 1)"
+    REFERENCE   
+        "IEEE 802.1s clause 13.22"
+    ::= { prvtStCommon 3 }
+
+prvtStForwardDelay OBJECT-TYPE
+    SYNTAX      Unsigned32 (4..30)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The amount of time in seconds to delay before entering forwarding state.
+         Note that the following relationship is enforced:
+         2 x (prvtStForwardDelay - 1) >= prvtStMaxAge"
+    REFERENCE   
+        "IEEE 802.1s clause 13.23"
+    ::= { prvtStCommon 4 }
+
+prvtStPriority OBJECT-TYPE
+    SYNTAX      PrvtStBridgePriorityTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The bridge priority.
+         Valid values are multiples of 4096."
+    REFERENCE   
+        "IEEE 802.1s clause 13.23"
+    ::= { prvtStCommon 5 }
+
+prvtStTimeSinceTopologyChange OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The time, in seconds, since last topology change."
+    ::= { prvtStCommon 6 }
+
+prvtStTopChanges OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of topology changes detected."
+    ::= { prvtStCommon 7 }
+
+prvtStPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing port specific configuration information for the spanning-tree protocols."
+    ::= { prvtStCommon 8 }
+
+prvtStPortEntry OBJECT-TYPE
+    SYNTAX      PrvtStPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtStPortTable."
+    INDEX       { prvtStPortIfName }
+    ::= { prvtStPortTable 1 }
+
+PrvtStPortEntry ::= SEQUENCE {
+    prvtStPortIfName            OCTET STRING,
+    prvtStPortRowStatus         RowStatus,
+    prvtStPortBpduTx            TruthValue,
+    prvtStPortBpduRx            TruthValue,
+    prvtStPortDetectBpduLoss    TruthValue,
+    prvtStPortCiscoCompliant    TruthValue,
+    prvtStPortEdge              TruthValue,
+    prvtStPortEdgeStatus        TruthValue,
+    prvtStPortEdgeFlush         TruthValue,
+    prvtStPortLinkType          PrvtStLinkTypeTC,
+    prvtStPortLinkTypeStatus    PrvtStLinkTypeTC,
+    prvtStPortRestrictedRoot    TruthValue,
+    prvtStPortRestrictedTcn     TruthValue,
+    prvtStPortPathCost          Unsigned32,
+    prvtStPortPriority          PrvtStPortPriorityTC,
+    prvtStPortAdminStatus       TruthValue,
+    prvtStPortState             PrvtStPortStateTC,
+    prvtStPortRole              PrvtStPortRoleTC,
+    prvtStPortDesPCost          Unsigned32,
+    prvtStPortDesBridgeID       OCTET STRING,
+    prvtStPortDesPortID         PrvtStPortIdTC
+}
+
+prvtStPortIfName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus for prvtStPortTable"
+    ::= { prvtStPortEntry 1 }
+
+prvtStPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus for prvtStPortTable"
+    ::= { prvtStPortEntry 2 }
+
+prvtStPortBpduTx OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable transmission of BPDUs on this port."
+    ::= { prvtStPortEntry 3 }
+
+prvtStPortBpduRx OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configures how BPDUs received by the port should be processed."
+    ::= { prvtStPortEntry 4 }
+
+prvtStPortDetectBpduLoss OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable detection of BPDU loss."
+    ::= { prvtStPortEntry 5 }
+
+prvtStPortCiscoCompliant OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure this port to be Cisco compliant."
+    ::= { prvtStPortEntry 6 }
+
+prvtStPortEdge OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set port as an edge-port.
+         Note that ring ports can not be set as edge ports."
+    ::= { prvtStPortEntry 7 }
+
+prvtStPortEdgeStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Whether this port is currently operating as an edge port."
+    ::= { prvtStPortEntry 8 }
+
+prvtStPortEdgeFlush OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Flush edge port when blocking."
+    ::= { prvtStPortEntry 9 }
+
+prvtStPortLinkType OBJECT-TYPE
+    SYNTAX      PrvtStLinkTypeTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure the link type for this port."
+    REFERENCE   
+        "IEEE Std 802.1s Clause"
+    ::= { prvtStPortEntry 10 }
+
+prvtStPortLinkTypeStatus OBJECT-TYPE
+    SYNTAX      PrvtStLinkTypeTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current link type status for this port."
+    REFERENCE   
+        "IEEE Std 802.1s Clause"
+    ::= { prvtStPortEntry 11 }
+
+prvtStPortRestrictedRoot OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable root restriction on this port.
+         Note that ring ports can not have restricted root enabled."
+    ::= { prvtStPortEntry 12 }
+
+prvtStPortRestrictedTcn OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable topology change notification (TCN) restriction on this port.
+         Note that ring ports can not have restricted TCN enabled."
+    ::= { prvtStPortEntry 13 }
+
+prvtStPortPathCost OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..200000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure the path cost for this port."
+    REFERENCE   
+        "IEEE Std 802.1s"
+    ::= { prvtStPortEntry 14 }
+
+prvtStPortPriority OBJECT-TYPE
+    SYNTAX      PrvtStPortPriorityTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set port priority.
+         Valid values are multiples of 16."
+    REFERENCE   
+        "IEEE Std 802.1s"
+    ::= { prvtStPortEntry 15 }
+
+prvtStPortAdminStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable or disable spanning-tree on this port.
+         Note that ring ports can not be set to disabled."
+    ::= { prvtStPortEntry 16 }
+
+prvtStPortState OBJECT-TYPE
+    SYNTAX      PrvtStPortStateTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current state of this port."
+    ::= { prvtStPortEntry 17 }
+
+prvtStPortRole OBJECT-TYPE
+    SYNTAX      PrvtStPortRoleTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current role for this port."
+    ::= { prvtStPortEntry 18 }
+
+prvtStPortDesPCost OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The designated path cost for this port."
+    ::= { prvtStPortEntry 19 }
+
+prvtStPortDesBridgeID OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The designated bridge ID for this port."
+    ::= { prvtStPortEntry 20 }
+
+prvtStPortDesPortID OBJECT-TYPE
+    SYNTAX      PrvtStPortIdTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The designated port ID for this port."
+    ::= { prvtStPortEntry 21 }
+
+prvtStTxHoldCount OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..20)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "TxHoldCount is the value used by the Port Transmit state machine to limit the maximum transmission rate."
+    REFERENCE   
+        "IEEE 802.1s clause 13.23"
+    ::= { prvtStCommon 9 }
+
+prvtStLearnMode OBJECT-TYPE
+    SYNTAX      PrvtStLearnModeTC
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify learning of new MACs on non-edge ports"
+    REFERENCE   
+        "IEEE 802.1ad"
+    ::= { prvtStCommon 10 }
+
+prvtStStp OBJECT IDENTIFIER
+    ::= { prvtStObjects 2 }
+
+prvtStStpProtocolDisabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable STP protocol.
+         Note that only one flavour of xSTP can be running at a time (i.e. only one of
+         prvtStStpProtocolDisabled, prvtStRstpProtocolDisabled, prvtStMstpProtocolDisabled,
+         prvtStFRingProtocolDisabled can be true at a time."
+    ::= { prvtStStp 1 }
+
+prvtStRstp OBJECT IDENTIFIER
+    ::= { prvtStObjects 3 }
+
+prvtStRstpProtocolDisabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable RSTP protocol.
+         Note that only one flavour of xSTP can be running at a time (i.e. only one of
+         prvtStStpProtocolDisabled, prvtStRstpProtocolDisabled, prvtStMstpProtocolDisabled,
+         prvtStFRingProtocolDisabled can be true at a time."
+    ::= { prvtStRstp 1 }
+
+prvtStMstp OBJECT IDENTIFIER
+    ::= { prvtStObjects 4 }
+
+prvtStMstpProtocolDisabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable MSTP protocol.
+         Note that only one flavour of xSTP can be running at a time (i.e. only one of
+         prvtStStpProtocolDisabled, prvtStRstpProtocolDisabled, prvtStMstpProtocolEnable,
+         prvtStFRingProtocolDisabled can be true at a time."
+    ::= { prvtStMstp 1 }
+
+prvtStMstpRegionName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The configuration name of the MST region to which this bridge belongs."
+    REFERENCE   
+        "IEEE 802.1s clause 13.7"
+    ::= { prvtStMstp 2 }
+
+prvtStMstpRegionRevision OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "MST region revision."
+    REFERENCE   
+        "IEEE 802.1s clause 13.7"
+    ::= { prvtStMstp 3 }
+
+prvtStMstpMaxHops OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..40)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Maximum number of hops for the MST region."
+    REFERENCE   
+        "IEEE 802.1s clause 13.22"
+    ::= { prvtStMstp 4 }
+
+prvtStMstpMigrationDelay OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The Migration Delay timer in seconds."
+    ::= { prvtStMstp 6 }
+
+prvtStMstpInstTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStMstpInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains MST instance information."
+    ::= { prvtStMstp 8 }
+
+prvtStMstpInstEntry OBJECT-TYPE
+    SYNTAX      PrvtStMstpInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtStMstpInstTable."
+    INDEX       { prvtStMstpInstId }
+    ::= { prvtStMstpInstTable 1 }
+
+PrvtStMstpInstEntry ::= SEQUENCE {
+    prvtStMstpInstId                PrvtStInstIdExceptZeroTC,
+    prvtStMstpInstRowStatus         RowStatus,
+    prvtStMstpInstPriority          PrvtStBridgePriorityTC,
+    prvtStMstpInstTimeSinceTopChng  Unsigned32,
+    prvtStMstpInstTopChanges        Unsigned32
+}
+
+prvtStMstpInstId OBJECT-TYPE
+    SYNTAX      PrvtStInstIdExceptZeroTC
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An MST instance identifier."
+    ::= { prvtStMstpInstEntry 1 }
+
+prvtStMstpInstRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus entry for prvtStMstpInstTable."
+    ::= { prvtStMstpInstEntry 2 }
+
+prvtStMstpInstPriority OBJECT-TYPE
+    SYNTAX      PrvtStBridgePriorityTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The bridge priority for this MST instance.
+         Valid values are multiples of 4096."
+    REFERENCE   
+        "IEEE 802.1s clause 13.23"
+    ::= { prvtStMstpInstEntry 3 }
+
+prvtStMstpInstTimeSinceTopChng OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The time in seconds since the last time a topology change was detected for this MST instance."
+    ::= { prvtStMstpInstEntry 4 }
+
+prvtStMstpInstTopChanges OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The total number of topology changes detected for this MST instance."
+    ::= { prvtStMstpInstEntry 5 }
+
+prvtStMstpInstStatTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStMstpInstStatEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table contains additional MST instance status information."
+    ::= { prvtStMstp 9 }
+
+prvtStMstpInstStatEntry OBJECT-TYPE
+    SYNTAX      PrvtStMstpInstStatEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtStMstpInstStatTable."
+    INDEX       { prvtStMstpInstId }
+    ::= { prvtStMstpInstStatTable 1 }
+
+PrvtStMstpInstStatEntry ::= SEQUENCE {
+    prvtStMstpInstStatRRootID       OCTET STRING,
+    prvtStMstpInstStatRemHopCount   Unsigned32
+}
+
+prvtStMstpInstStatRRootID OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The regional root ID for this MST instance."
+    ::= { prvtStMstpInstStatEntry 2 }
+
+prvtStMstpInstStatRemHopCount OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The remaining hop count for this MST instance."
+    ::= { prvtStMstpInstStatEntry 3 }
+
+prvtStMstpVlanPerInstTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStMstpVlanPerInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Defines the mapping of VLANs to Spanning Tree instances."
+    ::= { prvtStMstp 10 }
+
+prvtStMstpVlanPerInstEntry OBJECT-TYPE
+    SYNTAX      PrvtStMstpVlanPerInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtStMstpVlanPerInstTable."
+    INDEX       { prvtStMstpVlanPerInstVlanId }
+    ::= { prvtStMstpVlanPerInstTable 1 }
+
+PrvtStMstpVlanPerInstEntry ::= SEQUENCE {
+    prvtStMstpVlanPerInstVlanId     Unsigned32,
+    prvtStMstpVlanPerInstRowStatus  RowStatus,
+    prvtStMstpVlanPerInstMstId      PrvtStInstIdTC
+}
+
+prvtStMstpVlanPerInstVlanId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..4095)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "VLAN identifier"
+    ::= { prvtStMstpVlanPerInstEntry 1 }
+
+prvtStMstpVlanPerInstRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus for prvtStMstpVlanPerInstTable."
+    ::= { prvtStMstpVlanPerInstEntry 2 }
+
+prvtStMstpVlanPerInstMstId OBJECT-TYPE
+    SYNTAX      PrvtStInstIdTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MST instance to which this VLAN belongs."
+    ::= { prvtStMstpVlanPerInstEntry 3 }
+
+prvtStMstpInstPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStMstpInstPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table containing configuration information regarding
+         a specific port for a given MST instance."
+    ::= { prvtStMstp 12 }
+
+prvtStMstpInstPortEntry OBJECT-TYPE
+    SYNTAX      PrvtStMstpInstPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtStMstpInstPortTable."
+    INDEX       { prvtStPortIfName, prvtStMInstPortInstId }
+    ::= { prvtStMstpInstPortTable 1 }
+
+PrvtStMstpInstPortEntry ::= SEQUENCE {
+    prvtStMInstPortInstId       PrvtStInstIdExceptZeroTC,
+    prvtStMInstPortRowStatus    RowStatus,
+    prvtStMInstPortPathCost     Unsigned32,
+    prvtStMInstPortPriority     PrvtStPortPriorityTC,
+    prvtStMInstPortAdminStatus  TruthValue,
+    prvtStMInstPortState        PrvtStPortStateTC,
+    prvtStMInstPortFwdTrans     Unsigned32,
+    prvtStMInstPortStatRole     PrvtStPortRoleTC,
+    prvtStMInstPortDesPCost     Unsigned32,
+    prvtStMInstPortDesBridgeID  OCTET STRING,
+    prvtStMInstPortDesPortID    PrvtStPortIdTC
+}
+
+prvtStMInstPortInstId OBJECT-TYPE
+    SYNTAX      PrvtStInstIdExceptZeroTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Instance ID"
+    ::= { prvtStMstpInstPortEntry 2 }
+
+prvtStMInstPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus for prvtStMstpInstPortTable"
+    ::= { prvtStMstpInstPortEntry 3 }
+
+prvtStMInstPortPathCost OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..200000000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The path cost for this MST instance port."
+    REFERENCE   
+        "IEEE Std 802.1s"
+    ::= { prvtStMstpInstPortEntry 4 }
+
+prvtStMInstPortPriority OBJECT-TYPE
+    SYNTAX      PrvtStPortPriorityTC
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The port priority for this MST instance port.
+         Valid values are multiples of 16."
+    REFERENCE   
+        "IEEE Std 802.1s"
+    ::= { prvtStMstpInstPortEntry 5 }
+
+prvtStMInstPortAdminStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable or disable spanning-tree for this MST instance port."
+    ::= { prvtStMstpInstPortEntry 6 }
+
+prvtStMInstPortState OBJECT-TYPE
+    SYNTAX      PrvtStPortStateTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current state of this MST instance port."
+    ::= { prvtStMstpInstPortEntry 7 }
+
+prvtStMInstPortFwdTrans OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of transitions from Learning state to Forwarding state
+         that have been made for this MST instance port."
+    ::= { prvtStMstpInstPortEntry 8 }
+
+prvtStMInstPortStatRole OBJECT-TYPE
+    SYNTAX      PrvtStPortRoleTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The current role for this MST instance port."
+    ::= { prvtStMstpInstPortEntry 9 }
+
+prvtStMInstPortDesPCost OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The designated port path cost."
+    ::= { prvtStMstpInstPortEntry 10 }
+
+prvtStMInstPortDesBridgeID OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The designated bridge ID."
+    ::= { prvtStMstpInstPortEntry 11 }
+
+prvtStMInstPortDesPortID OBJECT-TYPE
+    SYNTAX      PrvtStPortIdTC
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The designated port ID."
+    ::= { prvtStMstpInstPortEntry 12 }
+
+prvtStFRing OBJECT IDENTIFIER
+    ::= { prvtStObjects 5 }
+
+prvtStFRingProtocolDisabled OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable fast ring protocol.
+         Note that only one flavour of xSTP can be running at a time (i.e. only one of
+         prvtStStpProtocolDisabled, prvtStRstpProtocolDisabled, prvtStMstpProtocolEnable,
+         prvtStFRingProtocolDisabled can be true at a time.
+         Setting prvtStFRingProtocolDisabled to true will fail if prvtStFRingInstTable is empty."
+    ::= { prvtStFRing 1 }
+
+prvtStFRingPrefLink OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify preferred fast ring port"
+    ::= { prvtStFRing 2 }
+
+prvtStFRingInstTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStFRingInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each row in the table defines an instance of a fast ring.
+         Currently only one instance is supported.  An attempt to create more than one instance
+         will fail.
+         While prvtStFRingProtocolDisabled is true (i.e. fast-ring protocol is enabled), there must
+         exist at least one row in this table.  An attempt to delete the only existing row in this
+         table will fail while prvtStFRingProtocolDisabled is true."
+    ::= { prvtStFRing 3 }
+
+prvtStFRingInstEntry OBJECT-TYPE
+    SYNTAX      PrvtStFRingInstEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtStFRingInstTable."
+    INDEX       { prvtStFRingInstPort1, prvtStFRingInstPort2 }
+    ::= { prvtStFRingInstTable 1 }
+
+PrvtStFRingInstEntry ::= SEQUENCE {
+    prvtStFRingInstPort1        OCTET STRING,
+    prvtStFRingInstPort2        OCTET STRING,
+    prvtStFRingInstRowStatus    RowStatus
+}
+
+prvtStFRingInstPort1 OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The first ring port belonging to the fast ring.
+         prvtStFRingInstPort1 must exist in prvtStPortTable.
+         prvtStFRingInstPort1 must not equal prvtStFRingInstPort2."
+    ::= { prvtStFRingInstEntry 1 }
+
+prvtStFRingInstPort2 OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The second ring port belonging to the fast ring.
+         prvtStFRingInstPort2 must exist in prvtStPortTable.
+         prvtStFRingInstPort1 must not equal prvtStFRingInstPort2."
+    ::= { prvtStFRingInstEntry 2 }
+
+prvtStFRingInstRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "RowStatus entry for prvtStFRingInstTable."
+    ::= { prvtStFRingInstEntry 3 }
+
+stTopologyChange NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "A topologyChange trap is sent by a bridge when any of
+         its configured ports transitions from the Learning state
+         to the Forwarding state, or from the Forwarding state to
+         the Blocking state. The trap is not sent if a newRoot
+         trap is sent for the same transition. Implementation of
+         this trap is optional."
+    ::= { prvtStNotifications 1 }
+
+stNewRoot NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "The newRoot trap indicates that the sending agent has
+         become the new root of the Spanning Tree; the trap is
+         sent by a bridge soon after its election as the new
+         root, e.g., upon expiration of the Topology Change Timer,
+         immediately subsequent to its election. Implementation
+         of this trap is optional."
+    ::= { prvtStNotifications 2 }
+
+mstTopologyChange NOTIFICATION-TYPE
+    OBJECTS     { prvtStMInstPortStatRole, prvtStTimeSinceTopologyChange }
+    STATUS      current
+    DESCRIPTION 
+        "A topologyChange trap is sent by a bridge when any of
+         its configured ports transitions from the Learning state
+         to the Forwarding state, or from the Forwarding state to
+         the Blocking state. The trap is not sent if a newRoot
+         trap is sent for the same transition. Implementation of
+         this trap is optional."
+    ::= { prvtStNotifications 3 }
+
+mstNewRoot NOTIFICATION-TYPE
+    OBJECTS     { prvtStMInstPortStatRole }
+    STATUS      current
+    DESCRIPTION 
+        "The newRoot trap indicates that the sending agent has
+         become the new root of the MSTP; the trap is
+         sent by a bridge soon after its election as the new
+         root, e.g., upon expiration of the Topology Change Timer,
+         immediately subsequent to its election. Implementation
+         of this trap is optional."
+    ::= { prvtStNotifications 4 }
+
+END -- end of module PRVT-SPANNING-TREE-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-STATISTICS-HISTORY-MIB b/MIBS/telco-systems/binox/PRVT-STATISTICS-HISTORY-MIB
new file mode 100644
index 0000000..22fa5fc
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-STATISTICS-HISTORY-MIB
@@ -0,0 +1,341 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-STATISTICS-HISTORY-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-STATISTICS-HISTORY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtStatHistMIB MODULE-IDENTITY
+    LAST-UPDATED "201202200000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This MIB provides functionallity similar to RMON2-MIB.
+         Instead with OIDs mib is working with XPath 1.0 strings -
+         http://www.w3.org/TR/xpath. 
+         Profile tables will be initialized with currently available 
+         statistics."
+    REVISION    "201202200000Z"
+    DESCRIPTION 
+        "Initial version"
+    ::= { switch 180 }
+
+
+prvtStatHistObjects OBJECT IDENTIFIER
+    ::= { prvtStatHistMIB 1 }
+
+prvtStatHistShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable/disable the statistics history on the device"
+    ::= { prvtStatHistObjects 1 }
+
+prvtStatHistGetInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (10..3600)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Interval in seconds at which history statistics
+         will be gathered. Changes of this value will take
+         effect after current interval is over."
+    ::= { prvtStatHistObjects 2 }
+
+prvtStatHistType OBJECT-TYPE
+    SYNTAX      INTEGER { absolute(1), delta(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The method of sampling the selected variable.
+         Changes will take effect after current interval is over."
+    ::= { prvtStatHistObjects 3 }
+
+prvtStatHistProfileTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatHistProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Create profiles with XPath 1.0 pattern."
+    ::= { prvtStatHistObjects 4 }
+
+prvtStatHistProfileEntry OBJECT-TYPE
+    SYNTAX      PrvtStatHistProfileEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtStatHistProfileTable."
+    INDEX       { prvtStatHistProfileName }
+    ::= { prvtStatHistProfileTable 1 }
+
+PrvtStatHistProfileEntry ::= SEQUENCE {
+    prvtStatHistProfileName             OCTET STRING,
+    prvtStatHistProfileRowStatus        RowStatus,
+    prvtStatHistProfileXPathTemplate    OCTET STRING
+}
+
+prvtStatHistProfileName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..128))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Profile identifier - string with length [ 1 .. 128 ]"
+    ::= { prvtStatHistProfileEntry 1 }
+
+prvtStatHistProfileRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Create rows in prvtStatHistProfileTable."
+    ::= { prvtStatHistProfileEntry 2 }
+
+prvtStatHistProfileXPathTemplate OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "XPath 1.0 template - contains data model path, with '{%s}' as
+         key place holder - if we have multiply keys more '%s' must
+         be added. Changes of this value will take effect
+         after current interval is over."
+    ::= { prvtStatHistProfileEntry 3 }
+
+prvtStatHistControlTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatHistControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Control table binds profile to a keys."
+    ::= { prvtStatHistObjects 5 }
+
+prvtStatHistControlEntry OBJECT-TYPE
+    SYNTAX      PrvtStatHistControlEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtStatHistControlTable."
+    INDEX       { prvtStatHistControlId }
+    ::= { prvtStatHistControlTable 1 }
+
+PrvtStatHistControlEntry ::= SEQUENCE {
+    prvtStatHistControlId           Unsigned32,
+    prvtStatHistControlRowStatus    RowStatus,
+    prvtStatHistControlProfileName  OCTET STRING,
+    prvtStatHistControlXPathKey     OCTET STRING,
+    prvtStatHistControlValue        OCTET STRING,
+    prvtStatHistControlFirstDataId  OCTET STRING,
+    prvtStatHistControlLastDataId   OCTET STRING
+}
+
+prvtStatHistControlId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..200)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Control table identifier. Number [ 1 .. 200 ] "
+    ::= { prvtStatHistControlEntry 1 }
+
+prvtStatHistControlRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Create entry in prvtStatHistControlTable.
+         Changes of this value will take effect after
+         current interval is over."
+    ::= { prvtStatHistControlEntry 2 }
+
+prvtStatHistControlProfileName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..128))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Profile name from prvtStatHistProfileTable.
+         Changes of this value will take effect after
+         current interval is over."
+    ::= { prvtStatHistControlEntry 3 }
+
+prvtStatHistControlXPathKey OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..255))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "XPath key is applied to profile XPath-template.
+         Changes of this value will take effect after
+         current interval is over."
+    ::= { prvtStatHistControlEntry 4 }
+
+prvtStatHistControlValue OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Current value of the prvtStatHistControlProfileName +
+         prvtStatHistControlXPathKey or empty if get operation was unsucceful.
+         To debug the problem, enable logs."
+    ::= { prvtStatHistControlEntry 5 }
+
+prvtStatHistControlFirstDataId OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtStatHistDataTable has maximum 120 elements.
+         This restriction is due to hardware limitation.
+         prvtStatHistControlFirstDataId will define first valid index
+         in prvtStatHistDataTable table thus making constantly increasing
+         prvtStatHistDataId more predicatable for management systems.
+         Value should be treated as unsigned 64 bits integer"
+    ::= { prvtStatHistControlEntry 6 }
+
+prvtStatHistControlLastDataId OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "prvtStatHistDataTable has maximum 120 elements.
+         This restriction is due to hardware limitation.
+         prvtStatHistControlLastDataId will define last valid index
+         in prvtStatHistDataTable table thus making constantly increasing
+         prvtStatHistDataId more predicatable for management systems.
+         Value should be treated as unsigned 64 bits integer"
+    ::= { prvtStatHistControlEntry 7 }
+
+prvtStatHistDataTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatHistDataEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A historical sample of user-defined variables. This sample
+         is associated with the prvtStatHistControlEntry that set up the
+         parameters for a regular collection of these samples.
+         The prvtStatHistControlId value in the index identifies the
+         prvtStatHistControlEntry on whose behalf this entry was created."
+    ::= { prvtStatHistObjects 6 }
+
+prvtStatHistDataEntry OBJECT-TYPE
+    SYNTAX      PrvtStatHistDataEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtStatHistDataTable"
+    INDEX       { prvtStatHistControlId, prvtStatHistDataId }
+    ::= { prvtStatHistDataTable 1 }
+
+PrvtStatHistDataEntry ::= SEQUENCE {
+    prvtStatHistDataId              OCTET STRING,
+    prvtStatHistDataIntervalStart   OCTET STRING,
+    prvtStatHistDataIntervalEnd     OCTET STRING,
+    prvtStatHistDataProfile         OCTET STRING,
+    prvtStatHistDataKey             OCTET STRING,
+    prvtStatHistDataValue           OCTET STRING,
+    prvtStatHistDataStatus          INTEGER
+}
+
+prvtStatHistDataId OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index of prvtStatHistDataTable - 64 unsigned integer,
+         constantly increasing."
+    ::= { prvtStatHistDataEntry 1 }
+
+prvtStatHistDataIntervalStart OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Show when current interval has started."
+    ::= { prvtStatHistDataEntry 2 }
+
+prvtStatHistDataIntervalEnd OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Show when current interval has ended"
+    ::= { prvtStatHistDataEntry 3 }
+
+prvtStatHistDataProfile OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Profile being used"
+    ::= { prvtStatHistDataEntry 4 }
+
+prvtStatHistDataKey OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Key being used"
+    ::= { prvtStatHistDataEntry 5 }
+
+prvtStatHistDataValue OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Result value, 64 unsinged int"
+    ::= { prvtStatHistDataEntry 6 }
+
+prvtStatHistDataStatus OBJECT-TYPE
+    SYNTAX      INTEGER { notAvailable(1), positive(2), negative(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status of the operation."
+    ::= { prvtStatHistDataEntry 7 }
+
+END -- end of module PRVT-STATISTICS-HISTORY-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-STATISTICS-MIB b/MIBS/telco-systems/binox/PRVT-STATISTICS-MIB
new file mode 100644
index 0000000..97f6596
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-STATISTICS-MIB
@@ -0,0 +1,1909 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-STATISTICS-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-STATISTICS-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    sapEntry, sdpEntry
+        FROM PRVT-SERV-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    Counter64, Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtStatisticsMIB MODULE-IDENTITY
+    LAST-UPDATED "201401080000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The SNMP MIB module to manage the statistics."
+    REVISION    "201401080000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 181 }
+
+
+StatType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Choose to count packets,bytes or both."
+    SYNTAX      INTEGER { packet(1), bytes(2), all(3) }
+
+prvtStatObjects OBJECT IDENTIFIER
+    ::= { prvtStatisticsMIB 1 }
+
+prvtStatIngressPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatIngressPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Create ingress policy"
+    ::= { prvtStatObjects 1 }
+
+prvtStatIngressPolicyEntry OBJECT-TYPE
+    SYNTAX      PrvtStatIngressPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtStatIngressPolicyTable"
+    INDEX       { prvtStatIngressPolicyName }
+    ::= { prvtStatIngressPolicyTable 1 }
+
+PrvtStatIngressPolicyEntry ::= SEQUENCE {
+    prvtStatIngressPolicyName                       OCTET STRING,
+    prvtStatIngressPolicyRowStatus                  RowStatus,
+    prvtStatIngressPolicyDetailed                   TruthValue,
+    prvtStatIngressPolicyDescription                OCTET STRING,
+    prvtStatIngressPolicyFc                         TruthValue,
+    prvtStatIngressPolicyFcBwMeasurement            StatType,
+    prvtStatIngressPolicyColor                      TruthValue,
+    prvtStatIngressPolicyColorBwMeasurement         StatType,
+    prvtStatIngressPolicyUnicast                    TruthValue,
+    prvtStatIngressPolicyUnicastBwMeasurement       StatType,
+    prvtStatIngressPolicyBroadcast                  TruthValue,
+    prvtStatIngressPolicyBroadcastBwMeasurement     StatType,
+    prvtStatIngressPolicyMulticast                  TruthValue,
+    prvtStatIngressPolicyMulticastBwMeasurement     StatType
+}
+
+prvtStatIngressPolicyName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Policy Name"
+    ::= { prvtStatIngressPolicyEntry 1 }
+
+prvtStatIngressPolicyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Create entry in table."
+    ::= { prvtStatIngressPolicyEntry 2 }
+
+prvtStatIngressPolicyDetailed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable detailed statistics."
+    ::= { prvtStatIngressPolicyEntry 3 }
+
+prvtStatIngressPolicyDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..120))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configue description string."
+    ::= { prvtStatIngressPolicyEntry 4 }
+
+prvtStatIngressPolicyFc OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable internal priority statistics."
+    ::= { prvtStatIngressPolicyEntry 5 }
+
+prvtStatIngressPolicyFcBwMeasurement OBJECT-TYPE
+    SYNTAX      StatType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure internal priority statistics
+         to count packets,byte or both."
+    ::= { prvtStatIngressPolicyEntry 6 }
+
+prvtStatIngressPolicyColor OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable internal priority and color statistics."
+    ::= { prvtStatIngressPolicyEntry 7 }
+
+prvtStatIngressPolicyColorBwMeasurement OBJECT-TYPE
+    SYNTAX      StatType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure internal priority and color
+         statistics to count packets,byte or both."
+    ::= { prvtStatIngressPolicyEntry 8 }
+
+prvtStatIngressPolicyUnicast OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable unicast statistics."
+    ::= { prvtStatIngressPolicyEntry 9 }
+
+prvtStatIngressPolicyUnicastBwMeasurement OBJECT-TYPE
+    SYNTAX      StatType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure unicast statistics to count packets,byte or both."
+    ::= { prvtStatIngressPolicyEntry 10 }
+
+prvtStatIngressPolicyBroadcast OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable broadcast statistics."
+    ::= { prvtStatIngressPolicyEntry 11 }
+
+prvtStatIngressPolicyBroadcastBwMeasurement OBJECT-TYPE
+    SYNTAX      StatType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure broadcast statistics to count packets,byte or both."
+    ::= { prvtStatIngressPolicyEntry 12 }
+
+prvtStatIngressPolicyMulticast OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable muticast statistics."
+    ::= { prvtStatIngressPolicyEntry 13 }
+
+prvtStatIngressPolicyMulticastBwMeasurement OBJECT-TYPE
+    SYNTAX      StatType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure multicast statistics to count packets,byte or both."
+    ::= { prvtStatIngressPolicyEntry 14 }
+
+prvtStatEgressPolicyTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatEgressPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Create ingress policy"
+    ::= { prvtStatObjects 2 }
+
+prvtStatEgressPolicyEntry OBJECT-TYPE
+    SYNTAX      PrvtStatEgressPolicyEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtStatEgressPolicyTable"
+    INDEX       { prvtStatEgressPolicyName }
+    ::= { prvtStatEgressPolicyTable 1 }
+
+PrvtStatEgressPolicyEntry ::= SEQUENCE {
+    prvtStatEgressPolicyName                    OCTET STRING,
+    prvtStatEgressPolicyRowStatus               RowStatus,
+    prvtStatEgressPolicyDetailed                TruthValue,
+    prvtStatEgressPolicyDescription             OCTET STRING,
+    prvtStatEgressPolicyFc                      TruthValue,
+    prvtStatEgressPolicyFcBwMeasurement         StatType,
+    prvtStatEgressPolicyColor                   TruthValue,
+    prvtStatEgressPolicyColorBwMeasurement      StatType,
+    prvtStatEgressPolicyDaType                  TruthValue,
+    prvtStatEgressPolicyDaTypeBwMeasurement     StatType
+}
+
+prvtStatEgressPolicyName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Policy Name"
+    ::= { prvtStatEgressPolicyEntry 1 }
+
+prvtStatEgressPolicyRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Create entry in table."
+    ::= { prvtStatEgressPolicyEntry 2 }
+
+prvtStatEgressPolicyDetailed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable detailed statistics."
+    ::= { prvtStatEgressPolicyEntry 3 }
+
+prvtStatEgressPolicyDescription OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..120))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configue description string."
+    ::= { prvtStatEgressPolicyEntry 4 }
+
+prvtStatEgressPolicyFc OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable internal priority statistics."
+    ::= { prvtStatEgressPolicyEntry 5 }
+
+prvtStatEgressPolicyFcBwMeasurement OBJECT-TYPE
+    SYNTAX      StatType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure internal priority statistics
+         to count packets,byte or both."
+    ::= { prvtStatEgressPolicyEntry 6 }
+
+prvtStatEgressPolicyColor OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable internal priority and color statistics."
+    ::= { prvtStatEgressPolicyEntry 7 }
+
+prvtStatEgressPolicyColorBwMeasurement OBJECT-TYPE
+    SYNTAX      StatType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure internal priority and color
+         statistics to count packets,byte or both."
+    ::= { prvtStatEgressPolicyEntry 8 }
+
+prvtStatEgressPolicyDaType OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable unicast/broadcast statistics"
+    ::= { prvtStatEgressPolicyEntry 9 }
+
+prvtStatEgressPolicyDaTypeBwMeasurement OBJECT-TYPE
+    SYNTAX      StatType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Configure unicast/broadcast statistics to count packets,byte or both."
+    ::= { prvtStatEgressPolicyEntry 10 }
+
+prvtStatSapTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatSapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Apply policy on sap"
+    ::= { prvtStatObjects 3 }
+
+prvtStatSapEntry OBJECT-TYPE
+    SYNTAX      PrvtStatSapEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtStatSapTable"
+    AUGMENTS    { sapEntry }
+    ::= { prvtStatSapTable 1 }
+
+PrvtStatSapEntry ::= SEQUENCE {
+    prvtStatSapIngressPolicy        OCTET STRING,
+    prvtStatSapEgressPolicy         OCTET STRING,
+    prvtStatSapClear                TruthValue,
+    prvtStatSapInPackets            Counter64,
+    prvtStatSapInBytes              Counter64,
+    prvtStatSapDropPackets          Counter64,
+    prvtStatSapDropBytes            Counter64,
+    prvtStatSapUnicastPackets       Counter64,
+    prvtStatSapUnicastBytes         Counter64,
+    prvtStatSapMulticastPackets     Counter64,
+    prvtStatSapMulticastBytes       Counter64,
+    prvtStatSapBroadcastPackets     Counter64,
+    prvtStatSapBroadcastBytes       Counter64,
+    prvtStatSapPri0Packets          Counter64,
+    prvtStatSapPri0Bytes            Counter64,
+    prvtStatSapPri1Packets          Counter64,
+    prvtStatSapPri1Bytes            Counter64,
+    prvtStatSapPri2Packets          Counter64,
+    prvtStatSapPri2Bytes            Counter64,
+    prvtStatSapPri3Packets          Counter64,
+    prvtStatSapPri3Bytes            Counter64,
+    prvtStatSapPri4Packets          Counter64,
+    prvtStatSapPri4Bytes            Counter64,
+    prvtStatSapPri5Packets          Counter64,
+    prvtStatSapPri5Bytes            Counter64,
+    prvtStatSapPri6Packets          Counter64,
+    prvtStatSapPri6Bytes            Counter64,
+    prvtStatSapPri7Packets          Counter64,
+    prvtStatSapPri7Bytes            Counter64,
+    prvtStatSapPri0yPackets         Counter64,
+    prvtStatSapPri0yBytes           Counter64,
+    prvtStatSapPri1yPackets         Counter64,
+    prvtStatSapPri1yBytes           Counter64,
+    prvtStatSapPri2yPackets         Counter64,
+    prvtStatSapPri2yBytes           Counter64,
+    prvtStatSapPri3yPackets         Counter64,
+    prvtStatSapPri3yBytes           Counter64,
+    prvtStatSapPri4yPackets         Counter64,
+    prvtStatSapPri4yBytes           Counter64,
+    prvtStatSapPri5yPackets         Counter64,
+    prvtStatSapPri5yBytes           Counter64,
+    prvtStatSapPri6yPackets         Counter64,
+    prvtStatSapPri6yBytes           Counter64,
+    prvtStatSapPri7yPackets         Counter64,
+    prvtStatSapPri7yBytes           Counter64,
+    prvtStatSapEgPackets            Counter64,
+    prvtStatSapEgBytes              Counter64,
+    prvtStatSapEgUnicastPackets     Counter64,
+    prvtStatSapEgUnicastBytes       Counter64,
+    prvtStatSapEgMulticastPackets   Counter64,
+    prvtStatSapEgMulticastBytes     Counter64,
+    prvtStatSapEgBroadcastPackets   Counter64,
+    prvtStatSapEgBroadcastBytes     Counter64,
+    prvtStatSapEgPri0Packets        Counter64,
+    prvtStatSapEgPri0Bytes          Counter64,
+    prvtStatSapEgPri1Packets        Counter64,
+    prvtStatSapEgPri1Bytes          Counter64,
+    prvtStatSapEgPri2Packets        Counter64,
+    prvtStatSapEgPri2Bytes          Counter64,
+    prvtStatSapEgPri3Packets        Counter64,
+    prvtStatSapEgPri3Bytes          Counter64,
+    prvtStatSapEgPri4Packets        Counter64,
+    prvtStatSapEgPri4Bytes          Counter64,
+    prvtStatSapEgPri5Packets        Counter64,
+    prvtStatSapEgPri5Bytes          Counter64,
+    prvtStatSapEgPri6Packets        Counter64,
+    prvtStatSapEgPri6Bytes          Counter64,
+    prvtStatSapEgPri7Packets        Counter64,
+    prvtStatSapEgPri7Bytes          Counter64,
+    prvtStatSapEgPri0yPackets       Counter64,
+    prvtStatSapEgPri0yBytes         Counter64,
+    prvtStatSapEgPri1yPackets       Counter64,
+    prvtStatSapEgPri1yBytes         Counter64,
+    prvtStatSapEgPri2yPackets       Counter64,
+    prvtStatSapEgPri2yBytes         Counter64,
+    prvtStatSapEgPri3yPackets       Counter64,
+    prvtStatSapEgPri3yBytes         Counter64,
+    prvtStatSapEgPri4yPackets       Counter64,
+    prvtStatSapEgPri4yBytes         Counter64,
+    prvtStatSapEgPri5yPackets       Counter64,
+    prvtStatSapEgPri5yBytes         Counter64,
+    prvtStatSapEgPri6yPackets       Counter64,
+    prvtStatSapEgPri6yBytes         Counter64,
+    prvtStatSapEgPri7yPackets       Counter64,
+    prvtStatSapEgPri7yBytes         Counter64
+}
+
+prvtStatSapIngressPolicy OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Ingress policy Name"
+    ::= { prvtStatSapEntry 1 }
+
+prvtStatSapEgressPolicy OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Egress policy Name"
+    ::= { prvtStatSapEntry 2 }
+
+prvtStatSapClear OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Clear sap statistics"
+    ::= { prvtStatSapEntry 3 }
+
+prvtStatSapInPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSapEntry 4 }
+
+prvtStatSapInBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSapEntry 5 }
+
+prvtStatSapDropPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSapEntry 6 }
+
+prvtStatSapDropBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSapEntry 7 }
+
+prvtStatSapUnicastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Uni-pkt"
+    ::= { prvtStatSapEntry 8 }
+
+prvtStatSapUnicastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Uni-bts"
+    ::= { prvtStatSapEntry 9 }
+
+prvtStatSapMulticastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "multi-pkt"
+    ::= { prvtStatSapEntry 10 }
+
+prvtStatSapMulticastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "multi-bytes"
+    ::= { prvtStatSapEntry 11 }
+
+prvtStatSapBroadcastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "broad-pkt"
+    ::= { prvtStatSapEntry 12 }
+
+prvtStatSapBroadcastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "broad-bytes"
+    ::= { prvtStatSapEntry 13 }
+
+prvtStatSapPri0Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be (green)"
+    ::= { prvtStatSapEntry 14 }
+
+prvtStatSapPri0Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be (green)"
+    ::= { prvtStatSapEntry 15 }
+
+prvtStatSapPri1Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 (green)"
+    ::= { prvtStatSapEntry 16 }
+
+prvtStatSapPri1Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 (green)"
+    ::= { prvtStatSapEntry 17 }
+
+prvtStatSapPri2Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af green"
+    ::= { prvtStatSapEntry 18 }
+
+prvtStatSapPri2Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af green"
+    ::= { prvtStatSapEntry 19 }
+
+prvtStatSapPri3Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1(green)"
+    ::= { prvtStatSapEntry 20 }
+
+prvtStatSapPri3Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1(green)"
+    ::= { prvtStatSapEntry 21 }
+
+prvtStatSapPri4Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2(green)"
+    ::= { prvtStatSapEntry 22 }
+
+prvtStatSapPri4Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2(green)"
+    ::= { prvtStatSapEntry 23 }
+
+prvtStatSapPri5Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef(green)"
+    ::= { prvtStatSapEntry 24 }
+
+prvtStatSapPri5Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef(green)"
+    ::= { prvtStatSapEntry 25 }
+
+prvtStatSapPri6Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1(green)"
+    ::= { prvtStatSapEntry 26 }
+
+prvtStatSapPri6Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1(green)"
+    ::= { prvtStatSapEntry 27 }
+
+prvtStatSapPri7Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc(green)"
+    ::= { prvtStatSapEntry 28 }
+
+prvtStatSapPri7Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc(green)"
+    ::= { prvtStatSapEntry 29 }
+
+prvtStatSapPri0yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be yellow packets"
+    ::= { prvtStatSapEntry 30 }
+
+prvtStatSapPri0yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be yellow bytes"
+    ::= { prvtStatSapEntry 31 }
+
+prvtStatSapPri1yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 yellow packets"
+    ::= { prvtStatSapEntry 32 }
+
+prvtStatSapPri1yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 yellow bytes"
+    ::= { prvtStatSapEntry 33 }
+
+prvtStatSapPri2yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af yellow packets"
+    ::= { prvtStatSapEntry 34 }
+
+prvtStatSapPri2yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af yellow bytes"
+    ::= { prvtStatSapEntry 35 }
+
+prvtStatSapPri3yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1 yellow packets"
+    ::= { prvtStatSapEntry 36 }
+
+prvtStatSapPri3yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1 yellow bytes"
+    ::= { prvtStatSapEntry 37 }
+
+prvtStatSapPri4yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2 yellow packets"
+    ::= { prvtStatSapEntry 38 }
+
+prvtStatSapPri4yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2 yellow bytes"
+    ::= { prvtStatSapEntry 39 }
+
+prvtStatSapPri5yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef yellow packets"
+    ::= { prvtStatSapEntry 40 }
+
+prvtStatSapPri5yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef yellow bytes"
+    ::= { prvtStatSapEntry 41 }
+
+prvtStatSapPri6yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1 yellow packets"
+    ::= { prvtStatSapEntry 42 }
+
+prvtStatSapPri6yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1 yellow bytes"
+    ::= { prvtStatSapEntry 43 }
+
+prvtStatSapPri7yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc yellow packets"
+    ::= { prvtStatSapEntry 44 }
+
+prvtStatSapPri7yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc yellow bytes"
+    ::= { prvtStatSapEntry 45 }
+
+prvtStatSapEgPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSapEntry 46 }
+
+prvtStatSapEgBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSapEntry 47 }
+
+prvtStatSapEgUnicastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Uni-pkt"
+    ::= { prvtStatSapEntry 48 }
+
+prvtStatSapEgUnicastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Uni-bts"
+    ::= { prvtStatSapEntry 49 }
+
+prvtStatSapEgMulticastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "multi-pkt"
+    ::= { prvtStatSapEntry 50 }
+
+prvtStatSapEgMulticastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "multi-bytes"
+    ::= { prvtStatSapEntry 51 }
+
+prvtStatSapEgBroadcastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "broad-pkt"
+    ::= { prvtStatSapEntry 52 }
+
+prvtStatSapEgBroadcastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "broad-bytes"
+    ::= { prvtStatSapEntry 53 }
+
+prvtStatSapEgPri0Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be (green)"
+    ::= { prvtStatSapEntry 54 }
+
+prvtStatSapEgPri0Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be (green)"
+    ::= { prvtStatSapEntry 55 }
+
+prvtStatSapEgPri1Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 (green)"
+    ::= { prvtStatSapEntry 56 }
+
+prvtStatSapEgPri1Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 (green)"
+    ::= { prvtStatSapEntry 57 }
+
+prvtStatSapEgPri2Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af green"
+    ::= { prvtStatSapEntry 58 }
+
+prvtStatSapEgPri2Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af green"
+    ::= { prvtStatSapEntry 59 }
+
+prvtStatSapEgPri3Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1(green)"
+    ::= { prvtStatSapEntry 60 }
+
+prvtStatSapEgPri3Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1(green)"
+    ::= { prvtStatSapEntry 61 }
+
+prvtStatSapEgPri4Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2(green)"
+    ::= { prvtStatSapEntry 62 }
+
+prvtStatSapEgPri4Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2(green)"
+    ::= { prvtStatSapEntry 63 }
+
+prvtStatSapEgPri5Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef(green)"
+    ::= { prvtStatSapEntry 64 }
+
+prvtStatSapEgPri5Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef(green)"
+    ::= { prvtStatSapEntry 65 }
+
+prvtStatSapEgPri6Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1(green)"
+    ::= { prvtStatSapEntry 66 }
+
+prvtStatSapEgPri6Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1(green)"
+    ::= { prvtStatSapEntry 67 }
+
+prvtStatSapEgPri7Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc(green)"
+    ::= { prvtStatSapEntry 68 }
+
+prvtStatSapEgPri7Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc(green)"
+    ::= { prvtStatSapEntry 69 }
+
+prvtStatSapEgPri0yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be yellow packets"
+    ::= { prvtStatSapEntry 70 }
+
+prvtStatSapEgPri0yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be yellow bytes"
+    ::= { prvtStatSapEntry 71 }
+
+prvtStatSapEgPri1yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 yellow packets"
+    ::= { prvtStatSapEntry 72 }
+
+prvtStatSapEgPri1yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 yellow bytes"
+    ::= { prvtStatSapEntry 73 }
+
+prvtStatSapEgPri2yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af yellow packets"
+    ::= { prvtStatSapEntry 74 }
+
+prvtStatSapEgPri2yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af yellow bytes"
+    ::= { prvtStatSapEntry 75 }
+
+prvtStatSapEgPri3yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1 yellow packets"
+    ::= { prvtStatSapEntry 76 }
+
+prvtStatSapEgPri3yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1 yellow bytes"
+    ::= { prvtStatSapEntry 77 }
+
+prvtStatSapEgPri4yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2 yellow packets"
+    ::= { prvtStatSapEntry 78 }
+
+prvtStatSapEgPri4yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2 yellow bytes"
+    ::= { prvtStatSapEntry 79 }
+
+prvtStatSapEgPri5yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef yellow packets"
+    ::= { prvtStatSapEntry 80 }
+
+prvtStatSapEgPri5yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef yellow bytes"
+    ::= { prvtStatSapEntry 81 }
+
+prvtStatSapEgPri6yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1 yellow packets"
+    ::= { prvtStatSapEntry 82 }
+
+prvtStatSapEgPri6yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1 yellow bytes"
+    ::= { prvtStatSapEntry 83 }
+
+prvtStatSapEgPri7yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc yellow packets"
+    ::= { prvtStatSapEntry 84 }
+
+prvtStatSapEgPri7yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc yellow bytes"
+    ::= { prvtStatSapEntry 85 }
+
+prvtStatSdpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStatSdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Apply policy on sap"
+    ::= { prvtStatObjects 4 }
+
+prvtStatSdpEntry OBJECT-TYPE
+    SYNTAX      PrvtStatSdpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtStatSdpTable"
+    AUGMENTS    { sdpEntry }
+    ::= { prvtStatSdpTable 1 }
+
+PrvtStatSdpEntry ::= SEQUENCE {
+    prvtStatSdpIngressPolicy        OCTET STRING,
+    prvtStatSdpEgressPolicy         OCTET STRING,
+    prvtStatSdpClear                TruthValue,
+    prvtStatSdpInPackets            Counter64,
+    prvtStatSdpInBytes              Counter64,
+    prvtStatSdpDropPackets          Counter64,
+    prvtStatSdpDropBytes            Counter64,
+    prvtStatSdpUnicastPackets       Counter64,
+    prvtStatSdpUnicastBytes         Counter64,
+    prvtStatSdpMulticastPackets     Counter64,
+    prvtStatSdpMulticastBytes       Counter64,
+    prvtStatSdpBroadcastPackets     Counter64,
+    prvtStatSdpBroadcastBytes       Counter64,
+    prvtStatSdpPri0Packets          Counter64,
+    prvtStatSdpPri0Bytes            Counter64,
+    prvtStatSdpPri1Packets          Counter64,
+    prvtStatSdpPri1Bytes            Counter64,
+    prvtStatSdpPri2Packets          Counter64,
+    prvtStatSdpPri2Bytes            Counter64,
+    prvtStatSdpPri3Packets          Counter64,
+    prvtStatSdpPri3Bytes            Counter64,
+    prvtStatSdpPri4Packets          Counter64,
+    prvtStatSdpPri4Bytes            Counter64,
+    prvtStatSdpPri5Packets          Counter64,
+    prvtStatSdpPri5Bytes            Counter64,
+    prvtStatSdpPri6Packets          Counter64,
+    prvtStatSdpPri6Bytes            Counter64,
+    prvtStatSdpPri7Packets          Counter64,
+    prvtStatSdpPri7Bytes            Counter64,
+    prvtStatSdpPri0yPackets         Counter64,
+    prvtStatSdpPri0yBytes           Counter64,
+    prvtStatSdpPri1yPackets         Counter64,
+    prvtStatSdpPri1yBytes           Counter64,
+    prvtStatSdpPri2yPackets         Counter64,
+    prvtStatSdpPri2yBytes           Counter64,
+    prvtStatSdpPri3yPackets         Counter64,
+    prvtStatSdpPri3yBytes           Counter64,
+    prvtStatSdpPri4yPackets         Counter64,
+    prvtStatSdpPri4yBytes           Counter64,
+    prvtStatSdpPri5yPackets         Counter64,
+    prvtStatSdpPri5yBytes           Counter64,
+    prvtStatSdpPri6yPackets         Counter64,
+    prvtStatSdpPri6yBytes           Counter64,
+    prvtStatSdpPri7yPackets         Counter64,
+    prvtStatSdpPri7yBytes           Counter64,
+    prvtStatSdpEgPackets            Counter64,
+    prvtStatSdpEgBytes              Counter64,
+    prvtStatSdpEgUnicastPackets     Counter64,
+    prvtStatSdpEgUnicastBytes       Counter64,
+    prvtStatSdpEgMulticastPackets   Counter64,
+    prvtStatSdpEgMulticastBytes     Counter64,
+    prvtStatSdpEgBroadcastPackets   Counter64,
+    prvtStatSdpEgBroadcastBytes     Counter64,
+    prvtStatSdpEgPri0Packets        Counter64,
+    prvtStatSdpEgPri0Bytes          Counter64,
+    prvtStatSdpEgPri1Packets        Counter64,
+    prvtStatSdpEgPri1Bytes          Counter64,
+    prvtStatSdpEgPri2Packets        Counter64,
+    prvtStatSdpEgPri2Bytes          Counter64,
+    prvtStatSdpEgPri3Packets        Counter64,
+    prvtStatSdpEgPri3Bytes          Counter64,
+    prvtStatSdpEgPri4Packets        Counter64,
+    prvtStatSdpEgPri4Bytes          Counter64,
+    prvtStatSdpEgPri5Packets        Counter64,
+    prvtStatSdpEgPri5Bytes          Counter64,
+    prvtStatSdpEgPri6Packets        Counter64,
+    prvtStatSdpEgPri6Bytes          Counter64,
+    prvtStatSdpEgPri7Packets        Counter64,
+    prvtStatSdpEgPri7Bytes          Counter64,
+    prvtStatSdpEgPri0yPackets       Counter64,
+    prvtStatSdpEgPri0yBytes         Counter64,
+    prvtStatSdpEgPri1yPackets       Counter64,
+    prvtStatSdpEgPri1yBytes         Counter64,
+    prvtStatSdpEgPri2yPackets       Counter64,
+    prvtStatSdpEgPri2yBytes         Counter64,
+    prvtStatSdpEgPri3yPackets       Counter64,
+    prvtStatSdpEgPri3yBytes         Counter64,
+    prvtStatSdpEgPri4yPackets       Counter64,
+    prvtStatSdpEgPri4yBytes         Counter64,
+    prvtStatSdpEgPri5yPackets       Counter64,
+    prvtStatSdpEgPri5yBytes         Counter64,
+    prvtStatSdpEgPri6yPackets       Counter64,
+    prvtStatSdpEgPri6yBytes         Counter64,
+    prvtStatSdpEgPri7yPackets       Counter64,
+    prvtStatSdpEgPri7yBytes         Counter64
+}
+
+prvtStatSdpIngressPolicy OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Ingress policy Name"
+    ::= { prvtStatSdpEntry 1 }
+
+prvtStatSdpEgressPolicy OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(0..32))
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Egress policy Name"
+    ::= { prvtStatSdpEntry 2 }
+
+prvtStatSdpClear OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Clear SDP statistics"
+    ::= { prvtStatSdpEntry 3 }
+
+prvtStatSdpInPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSdpEntry 4 }
+
+prvtStatSdpInBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSdpEntry 5 }
+
+prvtStatSdpDropPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSdpEntry 6 }
+
+prvtStatSdpDropBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSdpEntry 7 }
+
+prvtStatSdpUnicastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Uni-pkt"
+    ::= { prvtStatSdpEntry 8 }
+
+prvtStatSdpUnicastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Uni-bts"
+    ::= { prvtStatSdpEntry 9 }
+
+prvtStatSdpMulticastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "multi-pkt"
+    ::= { prvtStatSdpEntry 10 }
+
+prvtStatSdpMulticastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "multi-bytes"
+    ::= { prvtStatSdpEntry 11 }
+
+prvtStatSdpBroadcastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "broad-pkt"
+    ::= { prvtStatSdpEntry 12 }
+
+prvtStatSdpBroadcastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "broad-bytes"
+    ::= { prvtStatSdpEntry 13 }
+
+prvtStatSdpPri0Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be (green)"
+    ::= { prvtStatSdpEntry 14 }
+
+prvtStatSdpPri0Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be (green)"
+    ::= { prvtStatSdpEntry 15 }
+
+prvtStatSdpPri1Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 (green)"
+    ::= { prvtStatSdpEntry 16 }
+
+prvtStatSdpPri1Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 (green)"
+    ::= { prvtStatSdpEntry 17 }
+
+prvtStatSdpPri2Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af green"
+    ::= { prvtStatSdpEntry 18 }
+
+prvtStatSdpPri2Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af green"
+    ::= { prvtStatSdpEntry 19 }
+
+prvtStatSdpPri3Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1(green)"
+    ::= { prvtStatSdpEntry 20 }
+
+prvtStatSdpPri3Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1(green)"
+    ::= { prvtStatSdpEntry 21 }
+
+prvtStatSdpPri4Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2(green)"
+    ::= { prvtStatSdpEntry 22 }
+
+prvtStatSdpPri4Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2(green)"
+    ::= { prvtStatSdpEntry 23 }
+
+prvtStatSdpPri5Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef(green)"
+    ::= { prvtStatSdpEntry 24 }
+
+prvtStatSdpPri5Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef(green)"
+    ::= { prvtStatSdpEntry 25 }
+
+prvtStatSdpPri6Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1(green)"
+    ::= { prvtStatSdpEntry 26 }
+
+prvtStatSdpPri6Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1(green)"
+    ::= { prvtStatSdpEntry 27 }
+
+prvtStatSdpPri7Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc(green)"
+    ::= { prvtStatSdpEntry 28 }
+
+prvtStatSdpPri7Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc(green)"
+    ::= { prvtStatSdpEntry 29 }
+
+prvtStatSdpPri0yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be yellow packets"
+    ::= { prvtStatSdpEntry 30 }
+
+prvtStatSdpPri0yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be yellow bytes"
+    ::= { prvtStatSdpEntry 31 }
+
+prvtStatSdpPri1yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 yellow packets"
+    ::= { prvtStatSdpEntry 32 }
+
+prvtStatSdpPri1yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 yellow bytes"
+    ::= { prvtStatSdpEntry 33 }
+
+prvtStatSdpPri2yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af yellow packets"
+    ::= { prvtStatSdpEntry 34 }
+
+prvtStatSdpPri2yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af yellow bytes"
+    ::= { prvtStatSdpEntry 35 }
+
+prvtStatSdpPri3yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1 yellow packets"
+    ::= { prvtStatSdpEntry 36 }
+
+prvtStatSdpPri3yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1 yellow bytes"
+    ::= { prvtStatSdpEntry 37 }
+
+prvtStatSdpPri4yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2 yellow packets"
+    ::= { prvtStatSdpEntry 38 }
+
+prvtStatSdpPri4yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2 yellow bytes"
+    ::= { prvtStatSdpEntry 39 }
+
+prvtStatSdpPri5yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef yellow packets"
+    ::= { prvtStatSdpEntry 40 }
+
+prvtStatSdpPri5yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef yellow bytes"
+    ::= { prvtStatSdpEntry 41 }
+
+prvtStatSdpPri6yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1 yellow packets"
+    ::= { prvtStatSdpEntry 42 }
+
+prvtStatSdpPri6yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1 yellow bytes"
+    ::= { prvtStatSdpEntry 43 }
+
+prvtStatSdpPri7yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc yellow packets"
+    ::= { prvtStatSdpEntry 44 }
+
+prvtStatSdpPri7yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc yellow bytes"
+    ::= { prvtStatSdpEntry 45 }
+
+prvtStatSdpEgPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSdpEntry 46 }
+
+prvtStatSdpEgBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Matched frames per second"
+    ::= { prvtStatSdpEntry 47 }
+
+prvtStatSdpEgUnicastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Uni-pkt"
+    ::= { prvtStatSdpEntry 48 }
+
+prvtStatSdpEgUnicastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Uni-bts"
+    ::= { prvtStatSdpEntry 49 }
+
+prvtStatSdpEgMulticastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "multi-pkt"
+    ::= { prvtStatSdpEntry 50 }
+
+prvtStatSdpEgMulticastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "multi-bytes"
+    ::= { prvtStatSdpEntry 51 }
+
+prvtStatSdpEgBroadcastPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "broad-pkt"
+    ::= { prvtStatSdpEntry 52 }
+
+prvtStatSdpEgBroadcastBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "broad-bytes"
+    ::= { prvtStatSdpEntry 53 }
+
+prvtStatSdpEgPri0Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be (green)"
+    ::= { prvtStatSdpEntry 54 }
+
+prvtStatSdpEgPri0Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be (green)"
+    ::= { prvtStatSdpEntry 55 }
+
+prvtStatSdpEgPri1Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 (green)"
+    ::= { prvtStatSdpEntry 56 }
+
+prvtStatSdpEgPri1Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 (green)"
+    ::= { prvtStatSdpEntry 57 }
+
+prvtStatSdpEgPri2Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af green"
+    ::= { prvtStatSdpEntry 58 }
+
+prvtStatSdpEgPri2Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af green"
+    ::= { prvtStatSdpEntry 59 }
+
+prvtStatSdpEgPri3Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1(green)"
+    ::= { prvtStatSdpEntry 60 }
+
+prvtStatSdpEgPri3Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1(green)"
+    ::= { prvtStatSdpEntry 61 }
+
+prvtStatSdpEgPri4Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2(green)"
+    ::= { prvtStatSdpEntry 62 }
+
+prvtStatSdpEgPri4Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2(green)"
+    ::= { prvtStatSdpEntry 63 }
+
+prvtStatSdpEgPri5Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef(green)"
+    ::= { prvtStatSdpEntry 64 }
+
+prvtStatSdpEgPri5Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef(green)"
+    ::= { prvtStatSdpEntry 65 }
+
+prvtStatSdpEgPri6Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1(green)"
+    ::= { prvtStatSdpEntry 66 }
+
+prvtStatSdpEgPri6Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1(green)"
+    ::= { prvtStatSdpEntry 67 }
+
+prvtStatSdpEgPri7Packets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc(green)"
+    ::= { prvtStatSdpEntry 68 }
+
+prvtStatSdpEgPri7Bytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc(green)"
+    ::= { prvtStatSdpEntry 69 }
+
+prvtStatSdpEgPri0yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be yellow packets"
+    ::= { prvtStatSdpEntry 70 }
+
+prvtStatSdpEgPri0yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority be yellow bytes"
+    ::= { prvtStatSdpEntry 71 }
+
+prvtStatSdpEgPri1yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 yellow packets"
+    ::= { prvtStatSdpEntry 72 }
+
+prvtStatSdpEgPri1yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l2 yellow bytes"
+    ::= { prvtStatSdpEntry 73 }
+
+prvtStatSdpEgPri2yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af yellow packets"
+    ::= { prvtStatSdpEntry 74 }
+
+prvtStatSdpEgPri2yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority af yellow bytes"
+    ::= { prvtStatSdpEntry 75 }
+
+prvtStatSdpEgPri3yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1 yellow packets"
+    ::= { prvtStatSdpEntry 76 }
+
+prvtStatSdpEgPri3yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority l1 yellow bytes"
+    ::= { prvtStatSdpEntry 77 }
+
+prvtStatSdpEgPri4yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2 yellow packets"
+    ::= { prvtStatSdpEntry 78 }
+
+prvtStatSdpEgPri4yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h2 yellow bytes"
+    ::= { prvtStatSdpEntry 79 }
+
+prvtStatSdpEgPri5yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef yellow packets"
+    ::= { prvtStatSdpEntry 80 }
+
+prvtStatSdpEgPri5yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority ef yellow bytes"
+    ::= { prvtStatSdpEntry 81 }
+
+prvtStatSdpEgPri6yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1 yellow packets"
+    ::= { prvtStatSdpEntry 82 }
+
+prvtStatSdpEgPri6yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority h1 yellow bytes"
+    ::= { prvtStatSdpEntry 83 }
+
+prvtStatSdpEgPri7yPackets OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc yellow packets"
+    ::= { prvtStatSdpEntry 84 }
+
+prvtStatSdpEgPri7yBytes OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "priority nc yellow bytes"
+    ::= { prvtStatSdpEntry 85 }
+
+END -- end of module PRVT-STATISTICS-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-STORM-CTL-MIB b/MIBS/telco-systems/binox/PRVT-STORM-CTL-MIB
new file mode 100644
index 0000000..4850e9c
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-STORM-CTL-MIB
@@ -0,0 +1,168 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-STORM-CTL-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-STORM-CTL-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtStormCtlMIB MODULE-IDENTITY
+    LAST-UPDATED "201006210000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB module for managing storm control."
+    REVISION    "201006210000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 171 }
+
+
+RateThresholdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A rate threshold in packets per seconds."
+    SYNTAX      Unsigned32
+
+prvtStormCtlMIBObjects OBJECT IDENTIFIER
+    ::= { prvtStormCtlMIB 1 }
+
+prvtStrmCtlPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStrmCtlPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of interfaces that have storm control functionality configured."
+    ::= { prvtStormCtlMIBObjects 1 }
+
+prvtStrmCtlPortEntry OBJECT-TYPE
+    SYNTAX      PrvtStrmCtlPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtStrmCtlPortTable."
+    INDEX       { ifIndex }
+    ::= { prvtStrmCtlPortTable 1 }
+
+PrvtStrmCtlPortEntry ::= SEQUENCE {
+    prvtStrmCtlPortRowStatus    RowStatus,
+    prvtStrmCtlPortShutdown     TruthValue
+}
+
+prvtStrmCtlPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this port."
+    ::= { prvtStrmCtlPortEntry 1 }
+
+prvtStrmCtlPortShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'false' to enable storm control functionality on this port."
+    ::= { prvtStrmCtlPortEntry 3 }
+
+prvtStrmCtlPortTrafficTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtStrmCtlPortTrafficEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table of traffic-type specific configuration for each interface.
+         Currently, only one traffic type is supported per interface."
+    ::= { prvtStormCtlMIBObjects 3 }
+
+prvtStrmCtlPortTrafficEntry OBJECT-TYPE
+    SYNTAX      PrvtStrmCtlPortTrafficEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtStrmCtlPortTrafficTable."
+    INDEX       { ifIndex, prvtStrmCtlPortTrafficType }
+    ::= { prvtStrmCtlPortTrafficTable 1 }
+
+PrvtStrmCtlPortTrafficEntry ::= SEQUENCE {
+    prvtStrmCtlPortTrafficType          INTEGER,
+    prvtStrmCtlPortTrafficRowStatus     RowStatus,
+    prvtStrmCtlPortTrafficThreshold     RateThresholdType
+}
+
+prvtStrmCtlPortTrafficType OBJECT-TYPE
+    SYNTAX      INTEGER { all(0), unknown(1), multicast(2), broadcast(4) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type of traffic to which this row applies "
+    ::= { prvtStrmCtlPortTrafficEntry 1 }
+
+prvtStrmCtlPortTrafficRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this traffic type."
+    ::= { prvtStrmCtlPortTrafficEntry 2 }
+
+prvtStrmCtlPortTrafficThreshold OBJECT-TYPE
+    SYNTAX      RateThresholdType
+    UNITS       "packets-per-second"
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The threshold at which, when exceeded, traffic will undergo
+         storm control action for this port and traffic type."
+    ::= { prvtStrmCtlPortTrafficEntry 3 }
+
+END -- end of module PRVT-STORM-CTL-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SUPER-VLAN-MIB b/MIBS/telco-systems/binox/PRVT-SUPER-VLAN-MIB
new file mode 100644
index 0000000..2edfed4
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SUPER-VLAN-MIB
@@ -0,0 +1,272 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SUPER-VLAN-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SUPER-VLAN-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex, InterfaceIndexOrZero
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, OBJECT-TYPE
+        FROM SNMPv2-SMI
+    RowStatus
+        FROM SNMPv2-TC;
+
+prvtSuperVlanMIB MODULE-IDENTITY
+    LAST-UPDATED "201008040000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Private MIB supporting Super VLANs"
+    REVISION    "201008040000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 136 }
+
+
+prvtSuperVlanMIBObjects OBJECT IDENTIFIER
+    ::= { prvtSuperVlanMIB 1 }
+
+prvtSuperVlanIfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSuperVlanIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of Super-VLAN source ports.
+         A source port must always be associated with either a single target port
+         (specified by a non-zero value for prvtSuperVlanIfTargetPort) or must be
+         associated with a pair of ring ports (specified by creating an entry in
+         prvtSuperVlanIfRingPortTable).
+         Thus when creating a new entry in prvtSuperVlanIfTable, either the object
+         prvtSuperVlanIfTargetPort must be simultaneously set to a valid non-zero
+         ifIndex value or an entry in prvtSuperVlanIfRingPortTable must be
+         simultaneously created to specify the associated ring ports."
+    ::= { prvtSuperVlanMIBObjects 1 }
+
+prvtSuperVlanIfEntry OBJECT-TYPE
+    SYNTAX      PrvtSuperVlanIfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSuperVlanIfTable."
+    INDEX       { prvtSuperVlanIfIndex }
+    ::= { prvtSuperVlanIfTable 1 }
+
+PrvtSuperVlanIfEntry ::= SEQUENCE {
+    prvtSuperVlanIfIndex        InterfaceIndex,
+    prvtSuperVlanIfTargetPort   InterfaceIndexOrZero,
+    prvtSuperVlanIfRowStatus    RowStatus
+}
+
+prvtSuperVlanIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of a Super-VLAN source port."
+    ::= { prvtSuperVlanIfEntry 1 }
+
+prvtSuperVlanIfTargetPort OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The IfIndex of a target port associated with this Super-VLAN source port.
+         A value of zero indicates that the source port is not associated with a
+         single target port but is associated with a pair of ring ports specified
+         in prvtSuperVlanIfRingPortTable.
+         Changing this object from a zero value to a non-zero value that is a valid
+         ifIndex (i.e. changing from a ring-port to a single target port), will
+         result in the associated entry in prvtSuperVlanIfRingPortTable being
+         automatically deleted."
+    ::= { prvtSuperVlanIfEntry 2 }
+
+prvtSuperVlanIfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for prvtSuperVlanIfTable."
+    ::= { prvtSuperVlanIfEntry 3 }
+
+prvtSuperVlanIfCVlanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSuperVlanIfCVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of customer VLANs belonging to a Super-VLAN source port."
+    ::= { prvtSuperVlanMIBObjects 2 }
+
+prvtSuperVlanIfCVlanEntry OBJECT-TYPE
+    SYNTAX      PrvtSuperVlanIfCVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSuperVlanIfCVlanTable."
+    INDEX       { prvtSuperVlanIfIndex, prvtSuperVlanIfCVlanId }
+    ::= { prvtSuperVlanIfCVlanTable 1 }
+
+PrvtSuperVlanIfCVlanEntry ::= SEQUENCE {
+    prvtSuperVlanIfCVlanId          Integer32,
+    prvtSuperVlanIfCVlanMask        OCTET STRING,
+    prvtSuperVlanIfCVlanRowStatus   RowStatus
+}
+
+prvtSuperVlanIfCVlanId OBJECT-TYPE
+    SYNTAX      Integer32 (1..4092)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN identifier of a customer VLAN belonging to a Super-VLAN source port."
+    ::= { prvtSuperVlanIfCVlanEntry 1 }
+
+prvtSuperVlanIfCVlanMask OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(4))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mask to apply to the VLAN identifier (prvtSuperVlanIfCVlanId).
+         A value of all zeros represents that no mask is applied "
+    ::= { prvtSuperVlanIfCVlanEntry 2 }
+
+prvtSuperVlanIfCVlanRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for prvtSuperVlanIfCVlanTable."
+    ::= { prvtSuperVlanIfCVlanEntry 3 }
+
+prvtSuperVlanIfRingPortTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSuperVlanIfRingPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table specifies a pair of ring ports to associate with a Super-VLAN
+         source port.
+         Only a single pair of ring ports may be associated per source port.
+         
+         A source port must always be associated with either a single target port
+         (specified by a non-zero value for prvtSuperVlanIfTargetPort) or must be
+         associated with a pair of ring ports (specified by creating an entry in
+         prvtSuperVlanIfRingPortTable).
+         When an entry is successfully created in prvtSuperVlanIfRingPortTable for
+         a particular source port, that source port's prvtSuperVlanIfTargetPort
+         object is automatically set to a zero value indicating that the source
+         port is associated with a pair of ring ports instead of a single target
+         port (i.e. when creating an entry in prvtSuperVlanIfRingPortTable, it is
+         not neccessary to also clear prvtSuperVlanIfTargetPort)."
+    ::= { prvtSuperVlanMIBObjects 3 }
+
+prvtSuperVlanIfRingPortEntry OBJECT-TYPE
+    SYNTAX      PrvtSuperVlanIfRingPortEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSuperVlanIfRingPortTable."
+    INDEX       { prvtSuperVlanIfIndex, prvtSuperVlanIfRingPort1, 
+                  prvtSuperVlanIfRingPort2 }
+    ::= { prvtSuperVlanIfRingPortTable 1 }
+
+PrvtSuperVlanIfRingPortEntry ::= SEQUENCE {
+    prvtSuperVlanIfRingPort1            InterfaceIndex,
+    prvtSuperVlanIfRingPort2            InterfaceIndex,
+    prvtSuperVlanIfRingPortVlanId       Integer32,
+    prvtSuperVlanIfRingPortPreferred    InterfaceIndexOrZero,
+    prvtSuperVlanIfRingPortActive       InterfaceIndexOrZero,
+    prvtSuperVlanIfRingPortRowStatus    RowStatus
+}
+
+prvtSuperVlanIfRingPort1 OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of the first ring port target associated with this Super-VLAN source port."
+    ::= { prvtSuperVlanIfRingPortEntry 1 }
+
+prvtSuperVlanIfRingPort2 OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of the second ring port target associated with this Super-VLAN source port."
+    ::= { prvtSuperVlanIfRingPortEntry 2 }
+
+prvtSuperVlanIfRingPortVlanId OBJECT-TYPE
+    SYNTAX      Integer32 (0..4092)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN to use in Spanning Tree decisions to determine the active Super-VLAN port.
+         The value '0' indicates no VLAN has been selected."
+    ::= { prvtSuperVlanIfRingPortEntry 3 }
+
+prvtSuperVlanIfRingPortPreferred OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of the preferred ring port to use for this ring."
+    ::= { prvtSuperVlanIfRingPortEntry 4 }
+
+prvtSuperVlanIfRingPortActive OBJECT-TYPE
+    SYNTAX      InterfaceIndexOrZero
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of the currently active ring port for this ring."
+    ::= { prvtSuperVlanIfRingPortEntry 5 }
+
+prvtSuperVlanIfRingPortRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for prvtSuperVlanIfRingPortTable."
+    ::= { prvtSuperVlanIfRingPortEntry 6 }
+
+END -- end of module PRVT-SUPER-VLAN-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SWITCH-ACCESS-LIST-MIB b/MIBS/telco-systems/binox/PRVT-SWITCH-ACCESS-LIST-MIB
new file mode 100644
index 0000000..2e165aa
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SWITCH-ACCESS-LIST-MIB
@@ -0,0 +1,2909 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-ACCESS-LIST-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SWITCH-ACCESS-LIST-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    InterfaceIndex
+        FROM IF-MIB
+    sapEncapValue, sapPortId, serviceId
+        FROM PRVT-SERV-MIB
+    ipSwitch
+        FROM PRVT-SWITCH-MIB
+    Counter64, Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, 
+    OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtSwitchAccessListMIB MODULE-IDENTITY
+    LAST-UPDATED "201006250000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The private MIB module that controls switch access-list parameters"
+    REVISION    "201006250000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { ipSwitch 1 }
+
+
+PrvtSwAclAcgType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Types of access groups."
+    SYNTAX      INTEGER { ipStd(0), ipExt(1), mac(2), etherType(3) }
+
+PrvtSwAclIpv4PrefixType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1d.1d.1d.1d/1d"
+    STATUS      current
+    DESCRIPTION 
+        "An IPv4 address prefix defining a subnet.
+         The value 255.255.255.255/0 will match all IPv4 traffic."
+    SYNTAX      OCTET STRING (SIZE(5))
+
+PrvtSwAclVlanIdTypeOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A VLAN identifier.
+         The value '0' indicates 'no value' and its behavior differs
+         depending upon the object."
+    SYNTAX      Integer32 (0..4095)
+
+PrvtSwAclDscpTypeOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "An IPv4 DiffServ Code Point value.
+         The value '64' indicates 'no value' and its behavior differs
+         depending upon the object (e.g. could indicate that the DSCP
+         field is ignored or could indicate that the DSCP field is
+         unaffected.)"
+    SYNTAX      Unsigned32 (0..64)
+
+PrvtSwAclTosTypeOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "An IPv4 Type Of Service value.
+         The value '16' indicates 'no value' (the TOS field is ignored.)"
+    SYNTAX      Unsigned32 (0..16)
+
+PrvtSwAclFcTypeOrNone ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "A forwarding class value.
+         The value 'none' indicates 'no value' (the FC field is not affected)."
+    SYNTAX      INTEGER { none(0), be(1), l2(2), af(3), l1(4), h2(5), 
+                    ef(6), h1(7), nc(8) }
+
+PrvtSwAclPrecedenceTypeOrNone ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "An IPv4 precedence value.
+         The value '8' indicates 'no value' (the Precedence field is ignored.)"
+    SYNTAX      INTEGER { routine(0), priority(1), immediate(2), 
+                    flash(3), flashOverride(4), critical(5), internet(6), 
+                    network(7), none(8) }
+
+PrvtSwAclVptTypeOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A VLAN priority tag value.
+         The value '8' indicates 'no value' and its behavior differs
+         depending upon the object (e.g. could indicate that the VPT
+         field is ignored or could indicate that the VPT field is
+         unaffected.)"
+    SYNTAX      Unsigned32 (0..8)
+
+PrvtSwAclVlanMaskType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:1x:1x:1x"
+    STATUS      current
+    DESCRIPTION 
+        "A VLAN mask.
+         A '1' in a bit position will result in the corresponding bit in the
+         VLAN ID becoming 'don't care' (i.e. always match)."
+    SYNTAX      OCTET STRING (SIZE(4))
+
+PrvtSwAclEtherType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:1x"
+    STATUS      current
+    DESCRIPTION 
+        "An EtherType value."
+    SYNTAX      OCTET STRING (SIZE(2))
+
+PrvtSwAclEtherTypeMask ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "1x:1x"
+    STATUS      current
+    DESCRIPTION 
+        "A mask to apply to an EtherType value (PrvtSwAclEtherType).
+         Currently, only values of '0000' and 'FFFF' are permitted.
+         The value '0000' represents that no mask is applied (i.e traffic must match
+         the EtherType value exactly).
+         The value 'FFFF' represents no restriction by EtherType (i.e. match any value)."
+    SYNTAX      OCTET STRING (SIZE(2))
+
+PrvtSwAclAction ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "An action to take when an access-list condition is asserted."
+    SYNTAX      INTEGER { permit(0), deny(1) }
+
+PrvtSwAclIpProtocol ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The protocol number as defined in the IP datagram header."
+    SYNTAX      Integer32 (0..255)
+
+PrvtSwAclPortIdTypeOrNone ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A UDP/TCP port number.
+         The value '-1' indicates that the object has no port
+         ID assigned to it."
+    SYNTAX      Integer32 (-1..65535)
+
+PrvtSwAclExceedAction ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "An action to take when a limit is exceeded."
+    SYNTAX      INTEGER { noAction(0), markYellow(1), markRed(2), 
+                    drop(3) }
+
+PrvtSwAclMatchTrafficType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Types of traffic to match."
+    SYNTAX      INTEGER { any(0), unknownUnicast(1), knownUnicast(2), 
+                    unknownMulticast(3), knownMulticast(4), broadcast(5) }
+
+PrvtSwAclGroupType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Access list group types."
+    SYNTAX      INTEGER { in(1), out(2), vlan(3) }
+
+PrvtSwAclDescrType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "30a"
+    STATUS      current
+    DESCRIPTION 
+        "A description string for an item."
+    SYNTAX      OCTET STRING (SIZE(0..30))
+
+PrvtSwAclNameType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "10a"
+    STATUS      current
+    DESCRIPTION 
+        "The name of an Access Control List."
+    SYNTAX      OCTET STRING (SIZE(1..10))
+
+PrvtSwAclRuleIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "An Access Control List rule identifier."
+    SYNTAX      Unsigned32 (1..255)
+
+PrvtSwAclStatsType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Types of statistics to monitor."
+    SYNTAX      INTEGER { matchCounterFrames(1), matchCounterBytes(2), 
+                    rateLimitRedNotRedFrames(3), 
+                    rateLimitRedNotRedBytes(4), 
+                    rateLimitGreenNotGreenFrames(5), 
+                    rateLimitGreenNotGreenBytes(6), 
+                    rateLimitGreenRedFrames(7), 
+                    rateLimitGreenRedBytes(8), 
+                    rateLimitGreenYellowFrames(9), 
+                    rateLimitGreenYellowBytes(10), 
+                    rateLimitRedYellowFrames(11), 
+                    rateLimitRedYellowBytes(12), 
+                    bwMonMatchCounterFrames(13), 
+                    bwMonMatchCounterBytes(14), bwMonRedNotRedFrames(15), 
+                    bwMonRedNotRedBytes(16), 
+                    bwMonGreenNotGreenFrames(17), 
+                    bwMonGreenNotGreenBytes(18), bwMonGreenRedFrames(19), 
+                    bwMonGreenRedBytes(20), bwMonGreenYellowFrames(21), 
+                    bwMonGreenYellowBytes(22), bwMonRedYellowFrames(23), 
+                    bwMonRedYellowBytes(24) }
+
+PrvtSwAclFcType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Types of forwarding classes."
+    SYNTAX      INTEGER { be(1), l2(2), af(3), l1(4), h2(5), ef(6), 
+                    h1(7), nc(8) }
+
+PrvtSwAclColorType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Traffic color assignments."
+    SYNTAX      INTEGER { green(1), yellow(2), red(3) }
+
+PrvtSwAclProfileIdType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A monitoring profile identifier."
+    SYNTAX      Integer32 (0..65535)
+
+PrvtSwAclRateLimitType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Types of rate limiting."
+    SYNTAX      INTEGER { single(1), dual(2) }
+
+PrvtSwAclRateType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A rate in kilobits per second (1000 bits/s)."
+    SYNTAX      Unsigned32
+
+PrvtSwAclBurstSizeType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "A burst size in kilobits (1000 bits)."
+    SYNTAX      Unsigned32
+
+PrvtSwAclTagType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Tag for an interface."
+    SYNTAX      INTEGER { tagged(1), untagged(2) }
+
+prvtSwAclNotifications OBJECT IDENTIFIER
+    ::= { prvtSwitchAccessListMIB 0 }
+
+prvtSwAclObjects OBJECT IDENTIFIER
+    ::= { prvtSwitchAccessListMIB 1 }
+
+prvtSwAclMonProfiles OBJECT IDENTIFIER
+    ::= { prvtSwAclObjects 1 }
+
+prvtSwAclMonPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclMonPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of access group monitoring profiles.
+         Up to 50 monitoring profiles are supported.
+         
+         Note that each profile defined in prvtSwAclMonPrfTable must at all times
+         have in prvtSwAclMonPrfStatsTable at least one type of statistic configured
+         (created) for monitoring.
+         
+         This requires that, when creating a new monitoring profile, the SNMP set
+         operation must contain two createAndGo operations, one for creating the
+         entry in prvtSwAclMonPrfTable, and one for simultaneously creating the
+         entry in prvtSwAclMonPrfStatsTable.
+         
+         Deleting a monitoring profile in prvtSwAclMonPrfTable, also deletes all
+         entries belonging to this monitoring profile in prvtSwAclMonPrfStatsTable."
+    ::= { prvtSwAclMonProfiles 1 }
+
+prvtSwAclMonPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclMonPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclMonPrfTable."
+    INDEX       { prvtSwAclMonPrfId }
+    ::= { prvtSwAclMonPrfTable 1 }
+
+PrvtSwAclMonPrfEntry ::= SEQUENCE {
+    prvtSwAclMonPrfId           PrvtSwAclProfileIdType,
+    prvtSwAclMonPrfIdRowStatus  RowStatus
+}
+
+prvtSwAclMonPrfId OBJECT-TYPE
+    SYNTAX      PrvtSwAclProfileIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Uniquely identifies a monitoring profile."
+    ::= { prvtSwAclMonPrfEntry 1 }
+
+prvtSwAclMonPrfIdRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for the monitoring profile."
+    ::= { prvtSwAclMonPrfEntry 2 }
+
+prvtSwAclMonPrfStatsTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclMonPrfStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of which statistics a monitoring profile should monitor.
+         Up to a maximum of twenty statistics may be monitored per profile.
+         
+         Note that each profile defined in prvtSwAclMonPrfTable must at all times
+         have in prvtSwAclMonPrfStatsTable at least one type of statistic configured
+         (created) for monitoring.
+         
+         Thus, when deleting, from prvtSwAclMonPrfStatsTable, the last remaining row
+         for a particular monitoring profile, the monitoring profile's entry in
+         prvtSwAclMonPrfTable must also be deleted within the same SNMP set operation.
+         Alternatively, to delete the last remaining statistic for a particular
+         monitoring profile, just delete the monitoring profile in prvtSwAclMonPrfTable."
+    ::= { prvtSwAclMonProfiles 2 }
+
+prvtSwAclMonPrfStatsEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclMonPrfStatsEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclMonPrfStatsTable."
+    INDEX       { prvtSwAclMonPrfId, prvtSwAclMonPrfStatsType }
+    ::= { prvtSwAclMonPrfStatsTable 1 }
+
+PrvtSwAclMonPrfStatsEntry ::= SEQUENCE {
+    prvtSwAclMonPrfStatsType        PrvtSwAclStatsType,
+    prvtSwAclMonPrfStatsRowStatus   RowStatus
+}
+
+prvtSwAclMonPrfStatsType OBJECT-TYPE
+    SYNTAX      PrvtSwAclStatsType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A type of statistic to monitor."
+    ::= { prvtSwAclMonPrfStatsEntry 1 }
+
+prvtSwAclMonPrfStatsRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for prvtSwAclMonPrfStatsTable."
+    ::= { prvtSwAclMonPrfStatsEntry 2 }
+
+prvtSwAclGroups OBJECT IDENTIFIER
+    ::= { prvtSwAclObjects 2 }
+
+prvtSwAclStdTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclStdEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of standard IP Access Control Lists.
+         Up to 250 entries are supported."
+    ::= { prvtSwAclGroups 1 }
+
+prvtSwAclStdEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclStdEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclStdTable."
+    INDEX       { prvtSwAclStdName }
+    ::= { prvtSwAclStdTable 1 }
+
+PrvtSwAclStdEntry ::= SEQUENCE {
+    prvtSwAclStdName        PrvtSwAclNameType,
+    prvtSwAclStdRowStatus   RowStatus,
+    prvtSwAclStdDescr       PrvtSwAclDescrType
+}
+
+prvtSwAclStdName OBJECT-TYPE
+    SYNTAX      PrvtSwAclNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A string uniquely identifying a standard IP Access Control List."
+    ::= { prvtSwAclStdEntry 1 }
+
+prvtSwAclStdRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this standard Access Control List."
+    ::= { prvtSwAclStdEntry 2 }
+
+prvtSwAclStdDescr OBJECT-TYPE
+    SYNTAX      PrvtSwAclDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary description to assign to this standard Access Control List."
+    ::= { prvtSwAclStdEntry 3 }
+
+prvtSwAclStdRuleTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclStdRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of rules for standard IP access-lists.
+         Up to 250 entries are supported per prvtSwAclStdName."
+    ::= { prvtSwAclGroups 2 }
+
+prvtSwAclStdRuleEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclStdRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclStdRuleTable."
+    INDEX       { prvtSwAclStdName, prvtSwAclStdRuleId }
+    ::= { prvtSwAclStdRuleTable 1 }
+
+PrvtSwAclStdRuleEntry ::= SEQUENCE {
+    prvtSwAclStdRuleId              PrvtSwAclRuleIdType,
+    prvtSwAclStdRuleRowStatus       RowStatus,
+    prvtSwAclStdRuleAction          PrvtSwAclAction,
+    prvtSwAclStdRuleIpSrcPrefix     PrvtSwAclIpv4PrefixType,
+    prvtSwAclStdRuleVlanId          PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclStdRuleVlanMask        PrvtSwAclVlanMaskType,
+    prvtSwAclStdRuleInnerVlanId     PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclStdRuleInnerVlanMask   PrvtSwAclVlanMaskType,
+    prvtSwAclStdRuleVpt             PrvtSwAclVptTypeOrNone,
+    prvtSwAclStdRuleInnerVpt        PrvtSwAclVptTypeOrNone,
+    prvtSwAclStdRuleDscp            PrvtSwAclDscpTypeOrNone,
+    prvtSwAclStdRuleUntaggedMode    TruthValue
+}
+
+prvtSwAclStdRuleId OBJECT-TYPE
+    SYNTAX      PrvtSwAclRuleIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index of the particular rule within the standard IP access control list."
+    ::= { prvtSwAclStdRuleEntry 1 }
+
+prvtSwAclStdRuleRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this standard access-list rule."
+    ::= { prvtSwAclStdRuleEntry 2 }
+
+prvtSwAclStdRuleAction OBJECT-TYPE
+    SYNTAX      PrvtSwAclAction
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action to perform when the condition of this access-list rule is true."
+    ::= { prvtSwAclStdRuleEntry 3 }
+
+prvtSwAclStdRuleIpSrcPrefix OBJECT-TYPE
+    SYNTAX      PrvtSwAclIpv4PrefixType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The IP source address prefix defining a subnet associated with this access-list rule."
+    ::= { prvtSwAclStdRuleEntry 4 }
+
+prvtSwAclStdRuleVlanId OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN ID associated with this access-list rule.
+         This must be set to the value '0' (no VLAN ID) when in untagged mode
+         (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclStdRuleEntry 5 }
+
+prvtSwAclStdRuleVlanMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanMaskType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN mask to use with this access-list rule.
+         This must be set to all ones (0xffff) (always match) when in untagged
+         mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclStdRuleEntry 6 }
+
+prvtSwAclStdRuleInnerVlanId OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN ID associated with this access-list rule.
+         This must be set to the value '0' (no VLAN ID) when in untagged mode
+         (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclStdRuleEntry 7 }
+
+prvtSwAclStdRuleInnerVlanMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanMaskType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN mask to use with this access-list rule.
+         This must be set to all ones (0xffff) (always match) when in untagged
+         mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclStdRuleEntry 8 }
+
+prvtSwAclStdRuleVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN priority tag associated with this access-list rule.
+         A value of '8' indicates that the VPT field is ignored.
+         This must be set to the value '8' (ignore VPT field) when in untagged
+         mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclStdRuleEntry 9 }
+
+prvtSwAclStdRuleInnerVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN priority tag associated with this access-list rule.
+         A value of '8' indicates that the VPT field is ignored.
+         This must be set to the value '8' (ignore VPT field) when in untagged
+         mode (i.e. when prvtSwAclStdRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclStdRuleEntry 10 }
+
+prvtSwAclStdRuleDscp OBJECT-TYPE
+    SYNTAX      PrvtSwAclDscpTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The DiffServ Code Point associated with this access-list rule.
+         A value of '64' indicates that the DSCP field is ignored."
+    ::= { prvtSwAclStdRuleEntry 11 }
+
+prvtSwAclStdRuleUntaggedMode OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enables untagged mode.
+         In untagged mode, only untagged frames are included in the match comparison,
+         otherwise all tagged and untagged frames are included."
+    ::= { prvtSwAclStdRuleEntry 12 }
+
+prvtSwAclExtTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclExtEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of extended IP Access Control Lists.
+         Up to 250 entries are supported."
+    ::= { prvtSwAclGroups 3 }
+
+prvtSwAclExtEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclExtEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclExtTable."
+    INDEX       { prvtSwAclExtName }
+    ::= { prvtSwAclExtTable 1 }
+
+PrvtSwAclExtEntry ::= SEQUENCE {
+    prvtSwAclExtName        PrvtSwAclNameType,
+    prvtSwAclExtRowStatus   RowStatus,
+    prvtSwAclExtDescr       PrvtSwAclDescrType
+}
+
+prvtSwAclExtName OBJECT-TYPE
+    SYNTAX      PrvtSwAclNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A string uniquely identifying an extended IP Access Control List."
+    ::= { prvtSwAclExtEntry 1 }
+
+prvtSwAclExtRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this extended Access Control List."
+    ::= { prvtSwAclExtEntry 2 }
+
+prvtSwAclExtDescr OBJECT-TYPE
+    SYNTAX      PrvtSwAclDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary description to assign to this extended Access Control List."
+    ::= { prvtSwAclExtEntry 3 }
+
+prvtSwAclExtRuleTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclExtRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of rules for extended IP access-lists.
+         Up to 250 entries are supported per prvtSwAclExtName."
+    ::= { prvtSwAclGroups 4 }
+
+prvtSwAclExtRuleEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclExtRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclExtRuleTable."
+    INDEX       { prvtSwAclExtName, prvtSwAclExtRuleId }
+    ::= { prvtSwAclExtRuleTable 1 }
+
+PrvtSwAclExtRuleEntry ::= SEQUENCE {
+    prvtSwAclExtRuleId              PrvtSwAclRuleIdType,
+    prvtSwAclExtRuleRowStatus       RowStatus,
+    prvtSwAclExtRuleAction          PrvtSwAclAction,
+    prvtSwAclExtRuleIpProtocol      PrvtSwAclIpProtocol,
+    prvtSwAclExtRuleIpSrcPrefix     PrvtSwAclIpv4PrefixType,
+    prvtSwAclExtRuleIpDstPrefix     PrvtSwAclIpv4PrefixType,
+    prvtSwAclExtRuleIcmpType        Integer32,
+    prvtSwAclExtRuleIcmpCode        Integer32,
+    prvtSwAclExtRuleEstablished     TruthValue,
+    prvtSwAclExtRuleTcpSrcPort      PrvtSwAclPortIdTypeOrNone,
+    prvtSwAclExtRuleTcpDstPort      PrvtSwAclPortIdTypeOrNone,
+    prvtSwAclExtRuleUdpSrcPort      PrvtSwAclPortIdTypeOrNone,
+    prvtSwAclExtRuleUdpDstPort      PrvtSwAclPortIdTypeOrNone,
+    prvtSwAclExtRuleTos             PrvtSwAclTosTypeOrNone,
+    prvtSwAclExtRulePrecedence      PrvtSwAclPrecedenceTypeOrNone,
+    prvtSwAclExtRuleVlanId          PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclExtRuleVlanMask        PrvtSwAclVlanMaskType,
+    prvtSwAclExtRuleInnerVlanId     PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclExtRuleInnerVlanMask   PrvtSwAclVlanMaskType,
+    prvtSwAclExtRuleVpt             PrvtSwAclVptTypeOrNone,
+    prvtSwAclExtRuleInnerVpt        PrvtSwAclVptTypeOrNone,
+    prvtSwAclExtRuleDscp            PrvtSwAclDscpTypeOrNone,
+    prvtSwAclExtRuleUntaggedMode    TruthValue
+}
+
+prvtSwAclExtRuleId OBJECT-TYPE
+    SYNTAX      PrvtSwAclRuleIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index of the particular rule within the extended IP access control list."
+    ::= { prvtSwAclExtRuleEntry 1 }
+
+prvtSwAclExtRuleRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this extended access-list rule."
+    ::= { prvtSwAclExtRuleEntry 2 }
+
+prvtSwAclExtRuleAction OBJECT-TYPE
+    SYNTAX      PrvtSwAclAction
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action to perform when the condition of this access-list rule is true."
+    ::= { prvtSwAclExtRuleEntry 3 }
+
+prvtSwAclExtRuleIpProtocol OBJECT-TYPE
+    SYNTAX      PrvtSwAclIpProtocol
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The IP protocol number associated with this access-list rule."
+    ::= { prvtSwAclExtRuleEntry 4 }
+
+prvtSwAclExtRuleIpSrcPrefix OBJECT-TYPE
+    SYNTAX      PrvtSwAclIpv4PrefixType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The IP source address prefix defining the subnet associated with this flow."
+    ::= { prvtSwAclExtRuleEntry 5 }
+
+prvtSwAclExtRuleIpDstPrefix OBJECT-TYPE
+    SYNTAX      PrvtSwAclIpv4PrefixType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The IP destination address prefix defining the subnet associated with this flow."
+    ::= { prvtSwAclExtRuleEntry 6 }
+
+prvtSwAclExtRuleIcmpType OBJECT-TYPE
+    SYNTAX      Integer32 (-1..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ICMP message type associated with this access-list rule.
+         Only used when prvtSwAclExtRuleIpProtocol equals icmp(1).
+         The value '-1' indicates ignore ICMP message type field."
+    ::= { prvtSwAclExtRuleEntry 7 }
+
+prvtSwAclExtRuleIcmpCode OBJECT-TYPE
+    SYNTAX      Integer32 (-1..255)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ICMP message code associated with this access-list rule.
+         Only used when prvtSwAclExtRuleIpProtocol equals icmp(1).
+         The value '-1' indicates ignore ICMP message code field."
+    ::= { prvtSwAclExtRuleEntry 8 }
+
+prvtSwAclExtRuleEstablished OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "When TCP protocol type is chosen, setting this object to 'true' indicates that
+         established connections will be matched.
+         Only used when prvtSwAclExtRuleIpProtocol equals tcp(6)."
+    ::= { prvtSwAclExtRuleEntry 9 }
+
+prvtSwAclExtRuleTcpSrcPort OBJECT-TYPE
+    SYNTAX      PrvtSwAclPortIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The TCP source port associated with this access-list rule.
+         Only used when prvtSwAclExtRuleIpProtocol equals tcp(6).
+         The value '-1' indicates ignore the TCP source port field."
+    ::= { prvtSwAclExtRuleEntry 10 }
+
+prvtSwAclExtRuleTcpDstPort OBJECT-TYPE
+    SYNTAX      PrvtSwAclPortIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The TCP destination port associated with this access-list rule.
+         Only used when prvtSwAclExtRuleIpProtocol equals tcp(6).
+         The value '-1' indicates ignore the TCP destination port field."
+    ::= { prvtSwAclExtRuleEntry 11 }
+
+prvtSwAclExtRuleUdpSrcPort OBJECT-TYPE
+    SYNTAX      PrvtSwAclPortIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The UDP source port associated with this access-list rule.
+         Only used when prvtSwAclExtRuleIpProtocol equals udp(17).
+         The value '-1' indicates ignore the UDP source port field."
+    ::= { prvtSwAclExtRuleEntry 12 }
+
+prvtSwAclExtRuleUdpDstPort OBJECT-TYPE
+    SYNTAX      PrvtSwAclPortIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The UDP destination port associated with this access-list rule.
+         Only used when prvtSwAclExtRuleIpProtocol equals udp(17).
+         The value '-1' indicates ignore the UDP destination port field."
+    ::= { prvtSwAclExtRuleEntry 13 }
+
+prvtSwAclExtRuleTos OBJECT-TYPE
+    SYNTAX      PrvtSwAclTosTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Type of Service value associated with this access-list rule.
+         The value '16' indicates that the TOS field is ignored."
+    ::= { prvtSwAclExtRuleEntry 14 }
+
+prvtSwAclExtRulePrecedence OBJECT-TYPE
+    SYNTAX      PrvtSwAclPrecedenceTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Precedence value associated with this access-list rule.
+         The value '8' indicates that the Precedence field is ignored."
+    ::= { prvtSwAclExtRuleEntry 15 }
+
+prvtSwAclExtRuleVlanId OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN ID associated with this access-list rule.
+         This must be set to the value '0' (no VLAN ID) when in untagged mode
+         (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclExtRuleEntry 16 }
+
+prvtSwAclExtRuleVlanMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanMaskType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN mask to use with this access-list rule.
+         This must be set to all ones (0xffff) (always match) when in untagged
+         mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclExtRuleEntry 17 }
+
+prvtSwAclExtRuleInnerVlanId OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN ID associated with this access-list rule.
+         This must be set to the value '0' (no VLAN ID) when in untagged mode
+         (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclExtRuleEntry 18 }
+
+prvtSwAclExtRuleInnerVlanMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanMaskType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN mask to use with this access-list rule.
+         This must be set to all ones (0xffff) (always match) when in untagged
+         mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclExtRuleEntry 19 }
+
+prvtSwAclExtRuleVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN priority tag associated with this access-list rule.
+         A value of '8' indicates that the VPT field is ignored.
+         This must be set to the value '8' (ignore VPT field) when in untagged
+         mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclExtRuleEntry 20 }
+
+prvtSwAclExtRuleInnerVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN priority tag associated with this access-list rule.
+         A value of '8' indicates that the VPT field is ignored.
+         This must be set to the value '8' (ignore VPT field) when in untagged
+         mode (i.e. when prvtSwAclExtRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclExtRuleEntry 21 }
+
+prvtSwAclExtRuleDscp OBJECT-TYPE
+    SYNTAX      PrvtSwAclDscpTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The DiffServ Code Point associated with this access-list rule.
+         A value of '64' indicates that the DSCP field is ignored."
+    ::= { prvtSwAclExtRuleEntry 22 }
+
+prvtSwAclExtRuleUntaggedMode OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enables untagged mode.
+         In untagged mode, only untagged frames are included in the match comparison,
+         otherwise all tagged and untagged frames are included."
+    ::= { prvtSwAclExtRuleEntry 23 }
+
+prvtSwAclMacTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclMacEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of MAC Access Control Lists.
+         Up to 250 entries are supported."
+    ::= { prvtSwAclGroups 5 }
+
+prvtSwAclMacEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclMacEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclMacTable."
+    INDEX       { prvtSwAclMacName }
+    ::= { prvtSwAclMacTable 1 }
+
+PrvtSwAclMacEntry ::= SEQUENCE {
+    prvtSwAclMacName        PrvtSwAclNameType,
+    prvtSwAclMacRowStatus   RowStatus,
+    prvtSwAclMacDescr       PrvtSwAclDescrType
+}
+
+prvtSwAclMacName OBJECT-TYPE
+    SYNTAX      PrvtSwAclNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A string uniquely identifying a MAC Access Control List."
+    ::= { prvtSwAclMacEntry 1 }
+
+prvtSwAclMacRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this MAC Access Control List."
+    ::= { prvtSwAclMacEntry 2 }
+
+prvtSwAclMacDescr OBJECT-TYPE
+    SYNTAX      PrvtSwAclDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary description to assign to this MAC Access Control List."
+    ::= { prvtSwAclMacEntry 3 }
+
+prvtSwAclMacRuleTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclMacRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of rules for MAC access-lists.
+         Up to 250 entries are supported per prvtSwAclMacName."
+    ::= { prvtSwAclGroups 6 }
+
+prvtSwAclMacRuleEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclMacRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclMacRuleTable."
+    INDEX       { prvtSwAclMacName, prvtSwAclMacRuleId }
+    ::= { prvtSwAclMacRuleTable 1 }
+
+PrvtSwAclMacRuleEntry ::= SEQUENCE {
+    prvtSwAclMacRuleId              PrvtSwAclRuleIdType,
+    prvtSwAclMacRuleRowStatus       RowStatus,
+    prvtSwAclMacRuleAction          PrvtSwAclAction,
+    prvtSwAclMacRuleMacSrc          MacAddress,
+    prvtSwAclMacRuleMacSrcMask      MacAddress,
+    prvtSwAclMacRuleMacDst          MacAddress,
+    prvtSwAclMacRuleMacDstMask      MacAddress,
+    prvtSwAclMacRuleTos             PrvtSwAclTosTypeOrNone,
+    prvtSwAclMacRulePrecedence      PrvtSwAclPrecedenceTypeOrNone,
+    prvtSwAclMacRuleVlanId          PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclMacRuleVlanMask        PrvtSwAclVlanMaskType,
+    prvtSwAclMacRuleInnerVlanId     PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclMacRuleInnerVlanMask   PrvtSwAclVlanMaskType,
+    prvtSwAclMacRuleVpt             PrvtSwAclVptTypeOrNone,
+    prvtSwAclMacRuleInnerVpt        PrvtSwAclVptTypeOrNone,
+    prvtSwAclMacRuleDscp            PrvtSwAclDscpTypeOrNone,
+    prvtSwAclMacRuleUntaggedMode    TruthValue,
+    prvtSwAclMacRuleDstAddrType     PrvtSwAclMatchTrafficType
+}
+
+prvtSwAclMacRuleId OBJECT-TYPE
+    SYNTAX      PrvtSwAclRuleIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index of the particular rule within the MAC access control list."
+    ::= { prvtSwAclMacRuleEntry 1 }
+
+prvtSwAclMacRuleRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this MAC access-list rule."
+    ::= { prvtSwAclMacRuleEntry 2 }
+
+prvtSwAclMacRuleAction OBJECT-TYPE
+    SYNTAX      PrvtSwAclAction
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action to perform when the condition of this access-list rule is true."
+    ::= { prvtSwAclMacRuleEntry 3 }
+
+prvtSwAclMacRuleMacSrc OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MAC source address associated with this access-list rule."
+    ::= { prvtSwAclMacRuleEntry 4 }
+
+prvtSwAclMacRuleMacSrcMask OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mask to use with the MAC source address associated with this access-list rule.
+         A '1' in a bit position will result in the corresponding bit in the
+         source MAC address becoming 'don't care' (i.e. always match).
+         Thus, a value of all ones will result in any MAC source address matching."
+    ::= { prvtSwAclMacRuleEntry 5 }
+
+prvtSwAclMacRuleMacDst OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The MAC destination address associated with this access-list rule."
+    ::= { prvtSwAclMacRuleEntry 6 }
+
+prvtSwAclMacRuleMacDstMask OBJECT-TYPE
+    SYNTAX      MacAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The mask to use with the MAC destination address associated with this access-list rule.
+         A '1' in a bit position will result in the corresponding bit in the
+         destination MAC address becoming 'don't care' (i.e. always match).
+         Thus, a value of all ones will result in any MAC destination address matching."
+    ::= { prvtSwAclMacRuleEntry 7 }
+
+prvtSwAclMacRuleTos OBJECT-TYPE
+    SYNTAX      PrvtSwAclTosTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Type of Service value associated with this access-list rule.
+         The value '16' indicates that the TOS field is ignored."
+    ::= { prvtSwAclMacRuleEntry 8 }
+
+prvtSwAclMacRulePrecedence OBJECT-TYPE
+    SYNTAX      PrvtSwAclPrecedenceTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Precedence value associated with this access-list rule.
+         The value '8' indicates that the Precedence field is ignored."
+    ::= { prvtSwAclMacRuleEntry 9 }
+
+prvtSwAclMacRuleVlanId OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN ID associated with this access-list rule.
+         This must be set to the value '0' (no VLAN ID) when in untagged mode
+         (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclMacRuleEntry 10 }
+
+prvtSwAclMacRuleVlanMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanMaskType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN mask to use with this access-list rule.
+         This must be set to all ones (0xffff) (always match) when in untagged
+         mode (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclMacRuleEntry 11 }
+
+prvtSwAclMacRuleInnerVlanId OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN ID associated with this access-list rule.
+         This must be set to the value '0' (no VLAN ID) when in untagged mode
+         (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclMacRuleEntry 12 }
+
+prvtSwAclMacRuleInnerVlanMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanMaskType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN mask to use with this access-list rule.
+         This must be set to all ones (0xffff) (always match) when in untagged
+         mode (i.e. when prvtSwAclMAcRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclMacRuleEntry 13 }
+
+prvtSwAclMacRuleVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN priority tag associated with this access-list rule.
+         A value of '8' indicates that the VPT field is ignored.
+         This must be set to the value '8' (ignore VPT field) when in untagged
+         mode (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclMacRuleEntry 14 }
+
+prvtSwAclMacRuleInnerVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN priority tag associated with this access-list rule.
+         A value of '8' indicates that the VPT field is ignored.
+         This must be set to the value '8' (ignore VPT field) when in untagged
+         mode (i.e. when prvtSwAclMacRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclMacRuleEntry 15 }
+
+prvtSwAclMacRuleDscp OBJECT-TYPE
+    SYNTAX      PrvtSwAclDscpTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The DiffServ Code Point associated with this access-list rule.
+         A value of '64' indicates that the DSCP field is ignored."
+    ::= { prvtSwAclMacRuleEntry 16 }
+
+prvtSwAclMacRuleUntaggedMode OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enables untagged mode.
+         In untagged mode, only untagged frames are included in the match comparison,
+         otherwise all tagged and untagged frames are included."
+    ::= { prvtSwAclMacRuleEntry 17 }
+
+prvtSwAclMacRuleDstAddrType OBJECT-TYPE
+    SYNTAX      PrvtSwAclMatchTrafficType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "What type of traffic (based on destination address) to match."
+    ::= { prvtSwAclMacRuleEntry 18 }
+
+prvtSwAclEthTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclEthEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of EtherType Access Control Lists.
+         Up to 250 entries are supported."
+    ::= { prvtSwAclGroups 7 }
+
+prvtSwAclEthEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclEthEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclEthTable."
+    INDEX       { prvtSwAclEthName }
+    ::= { prvtSwAclEthTable 1 }
+
+PrvtSwAclEthEntry ::= SEQUENCE {
+    prvtSwAclEthName        PrvtSwAclNameType,
+    prvtSwAclEthRowStatus   RowStatus,
+    prvtSwAclEthDescr       PrvtSwAclDescrType
+}
+
+prvtSwAclEthName OBJECT-TYPE
+    SYNTAX      PrvtSwAclNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A string uniquely identifying an EtherType Access Control List."
+    ::= { prvtSwAclEthEntry 1 }
+
+prvtSwAclEthRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this EtherType Access Control List."
+    ::= { prvtSwAclEthEntry 2 }
+
+prvtSwAclEthDescr OBJECT-TYPE
+    SYNTAX      PrvtSwAclDescrType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "An arbitrary description to assign to this EtherType Access Control List."
+    ::= { prvtSwAclEthEntry 3 }
+
+prvtSwAclEthRuleTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclEthRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of rules for EtherType access-lists.
+         Up to 250 entries are supported per prvtSwAclEthName."
+    ::= { prvtSwAclGroups 8 }
+
+prvtSwAclEthRuleEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclEthRuleEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclEthRuleTable."
+    INDEX       { prvtSwAclEthName, prvtSwAclEthRuleId }
+    ::= { prvtSwAclEthRuleTable 1 }
+
+PrvtSwAclEthRuleEntry ::= SEQUENCE {
+    prvtSwAclEthRuleId              PrvtSwAclRuleIdType,
+    prvtSwAclEthRuleRowStatus       RowStatus,
+    prvtSwAclEthRuleAction          PrvtSwAclAction,
+    prvtSwAclEthRuleEthType         PrvtSwAclEtherType,
+    prvtSwAclEthRuleEthTypeMask     PrvtSwAclEtherTypeMask,
+    prvtSwAclEthRuleTos             PrvtSwAclTosTypeOrNone,
+    prvtSwAclEthRulePrecedence      PrvtSwAclPrecedenceTypeOrNone,
+    prvtSwAclEthRuleVlanId          PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclEthRuleVlanMask        PrvtSwAclVlanMaskType,
+    prvtSwAclEthRuleInnerVlanId     PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclEthRuleInnerVlanMask   PrvtSwAclVlanMaskType,
+    prvtSwAclEthRuleVpt             PrvtSwAclVptTypeOrNone,
+    prvtSwAclEthRuleInnerVpt        PrvtSwAclVptTypeOrNone,
+    prvtSwAclEthRuleDscp            PrvtSwAclDscpTypeOrNone,
+    prvtSwAclEthRuleUntaggedMode    TruthValue
+}
+
+prvtSwAclEthRuleId OBJECT-TYPE
+    SYNTAX      PrvtSwAclRuleIdType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Index of the particular rule within the EtherType IP access control list."
+    ::= { prvtSwAclEthRuleEntry 1 }
+
+prvtSwAclEthRuleRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for EtherType access-list rule."
+    ::= { prvtSwAclEthRuleEntry 2 }
+
+prvtSwAclEthRuleAction OBJECT-TYPE
+    SYNTAX      PrvtSwAclAction
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action to perform when the condition of this access-list rule is true."
+    ::= { prvtSwAclEthRuleEntry 3 }
+
+prvtSwAclEthRuleEthType OBJECT-TYPE
+    SYNTAX      PrvtSwAclEtherType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The EtherType protocol number associated with this access-list rule."
+    ::= { prvtSwAclEthRuleEntry 4 }
+
+prvtSwAclEthRuleEthTypeMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclEtherTypeMask
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The EtherType protocol mask to use with this access-list rule.
+         A value of all ones (0xffff) will result in any EtherType protocol number
+         matching."
+    ::= { prvtSwAclEthRuleEntry 5 }
+
+prvtSwAclEthRuleTos OBJECT-TYPE
+    SYNTAX      PrvtSwAclTosTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Type of Service value associated with this access-list rule.
+         The value '16' indicates that the TOS field is ignored."
+    ::= { prvtSwAclEthRuleEntry 6 }
+
+prvtSwAclEthRulePrecedence OBJECT-TYPE
+    SYNTAX      PrvtSwAclPrecedenceTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Precedence value associated with this access-list rule.
+         The value '8' indicates that the Precedence field is ignored."
+    ::= { prvtSwAclEthRuleEntry 7 }
+
+prvtSwAclEthRuleVlanId OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN ID associated with this access-list rule.
+         This must be set to the value '0' (no VLAN ID) when in untagged mode
+         (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclEthRuleEntry 8 }
+
+prvtSwAclEthRuleVlanMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanMaskType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN mask to use with this access-list rule.
+         This must be set to all ones (0xffff) (always match) when in untagged
+         mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclEthRuleEntry 9 }
+
+prvtSwAclEthRuleInnerVlanId OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN ID associated with this access-list rule.
+         This must be set to the value '0' (no VLAN ID) when in untagged mode
+         (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclEthRuleEntry 10 }
+
+prvtSwAclEthRuleInnerVlanMask OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanMaskType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN mask to use with this access-list rule.
+         This must be set to all ones (0xffff) (always match) when in untagged
+         mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclEthRuleEntry 11 }
+
+prvtSwAclEthRuleVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN priority tag associated with this access-list rule.
+         A value of '8' indicates that the VPT field is ignored.
+         This must be set to the value '8' (ignore VPT field) when in untagged
+         mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclEthRuleEntry 12 }
+
+prvtSwAclEthRuleInnerVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN priority tag associated with this access-list rule.
+         A value of '8' indicates that the VPT field is ignored.
+         This must be set to the value '8' (ignore VPT field) when in untagged
+         mode (i.e. when prvtSwAclEthRuleUntaggedMode equals 'true')."
+    ::= { prvtSwAclEthRuleEntry 13 }
+
+prvtSwAclEthRuleDscp OBJECT-TYPE
+    SYNTAX      PrvtSwAclDscpTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The DiffServ Code Point associated with this access-list rule.
+         A value of '64' indicates that the DSCP field is ignored."
+    ::= { prvtSwAclEthRuleEntry 14 }
+
+prvtSwAclEthRuleUntaggedMode OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enables untagged mode.
+         In untagged mode, only untagged frames are included in the match comparison,
+         otherwise all tagged and untagged frames are included."
+    ::= { prvtSwAclEthRuleEntry 15 }
+
+prvtSwAclInterfaces OBJECT IDENTIFIER
+    ::= { prvtSwAclObjects 3 }
+
+prvtSwAclIfAcg OBJECT IDENTIFIER
+    ::= { prvtSwAclInterfaces 2 }
+
+prvtSwAclIfAcgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclIfAcgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table creates and controls the properties of traffic flows belonging to
+         physical and LAG interfaces.
+         Up to 250 entries are supported per interface (prvtSwAclIfAcgIndex).
+         The key combination (prvtSwAclIfAcgIndex, prvtSwAclIfAcgSeqId) must be unique
+         (i.e. no more than one entry must exist with the same interface and sequence-id
+         combination)."
+    ::= { prvtSwAclIfAcg 1 }
+
+prvtSwAclIfAcgEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclIfAcgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclIfAcgTable."
+    INDEX       { prvtSwAclIfAcgIndex, prvtSwAclIfAcgSeqId, 
+                  prvtSwAclIfAcgType, prvtSwAclIfAcgAclName, 
+                  prvtSwAclIfAcgAclType }
+    ::= { prvtSwAclIfAcgTable 1 }
+
+PrvtSwAclIfAcgEntry ::= SEQUENCE {
+    prvtSwAclIfAcgIndex             InterfaceIndex,
+    prvtSwAclIfAcgSeqId             Unsigned32,
+    prvtSwAclIfAcgType              PrvtSwAclAcgType,
+    prvtSwAclIfAcgAclName           PrvtSwAclNameType,
+    prvtSwAclIfAcgAclType           PrvtSwAclGroupType,
+    prvtSwAclIfAcgRowStatus         RowStatus,
+    prvtSwAclIfAcgVlan              PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclIfAcgVlanAdd           PrvtSwAclVlanIdTypeOrNone,
+    prvtSwAclIfAcgVpt               PrvtSwAclVptTypeOrNone,
+    prvtSwAclIfAcgInnerVpt          PrvtSwAclVptTypeOrNone,
+    prvtSwAclIfAcgDscp              PrvtSwAclDscpTypeOrNone,
+    prvtSwAclIfAcgColorGreenFc      PrvtSwAclFcTypeOrNone,
+    prvtSwAclIfAcgColorYellowFc     PrvtSwAclFcTypeOrNone,
+    prvtSwAclIfAcgColorRedFc        PrvtSwAclFcTypeOrNone,
+    prvtSwAclIfAcgColorGreenVpt     PrvtSwAclVptTypeOrNone,
+    prvtSwAclIfAcgColorYellowVpt    PrvtSwAclVptTypeOrNone,
+    prvtSwAclIfAcgColorRedVpt       PrvtSwAclVptTypeOrNone,
+    prvtSwAclIfAcgColorGreenDscp    PrvtSwAclDscpTypeOrNone,
+    prvtSwAclIfAcgColorYellowDscp   PrvtSwAclDscpTypeOrNone,
+    prvtSwAclIfAcgColorRedDscp      PrvtSwAclDscpTypeOrNone,
+    prvtSwAclIfAcgResetStats        TruthValue
+}
+
+prvtSwAclIfAcgIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The index of the physical or LAG interface to which this row applies."
+    ::= { prvtSwAclIfAcgEntry 1 }
+
+prvtSwAclIfAcgSeqId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the sequence (order/priority) in which this access group will be applied."
+    ::= { prvtSwAclIfAcgEntry 2 }
+
+prvtSwAclIfAcgType OBJECT-TYPE
+    SYNTAX      PrvtSwAclAcgType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type (e.g. ipStd, ipExt, mac, etherType) of access group that this row applies to."
+    ::= { prvtSwAclIfAcgEntry 3 }
+
+prvtSwAclIfAcgAclName OBJECT-TYPE
+    SYNTAX      PrvtSwAclNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The name of the access list that this row applies to.
+         This must match the name of an ACL created having the type specified by prvtSwAclIfAcgType.
+         (i.e. it must match one of prvtSwAclStdName, prvtSwAclExtName, prvtSwAclMacName,
+         prvtSwAclEthName corresponding to the type specified in prvtSwAclIfAcgType.)"
+    ::= { prvtSwAclIfAcgEntry 4 }
+
+prvtSwAclIfAcgAclType OBJECT-TYPE
+    SYNTAX      PrvtSwAclGroupType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type (e.g. in, out, vlan) of access list that this row applies to."
+    ::= { prvtSwAclIfAcgEntry 5 }
+
+prvtSwAclIfAcgRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this access-control group."
+    ::= { prvtSwAclIfAcgEntry 6 }
+
+prvtSwAclIfAcgVlan OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ID of the VLAN to which traffic belonging to this access-group will be redirected to.
+         The value of '0' indicates that redirection is disabled.
+         Only applicable for VLAN ACL types (when prvtSwAclIfAcgAclType equals 'vlan').
+         This object and prvtSwAclIfAcgVlanAdd are not permitted to be simultaneously non-zero."
+    ::= { prvtSwAclIfAcgEntry 8 }
+
+prvtSwAclIfAcgVlanAdd OBJECT-TYPE
+    SYNTAX      PrvtSwAclVlanIdTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The ID of the VLAN to which traffic belonging to this access-group will have added to.
+         The value of '0' indicates that redirection is disabled.
+         Only applicable for VLAN ACL types (when prvtSwAclIfAcgAclType equals 'vlan').
+         This object and prvtSwAclIfAcgVlan are not permitted to be simultaneously non-zero."
+    ::= { prvtSwAclIfAcgEntry 9 }
+
+prvtSwAclIfAcgVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The VLAN priority tag to assign to traffic belonging to this access-group.
+         A value of '8' indicates that the VPT field is unaffected.
+         Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out')."
+    ::= { prvtSwAclIfAcgEntry 10 }
+
+prvtSwAclIfAcgInnerVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The inner VLAN priority tag to assign to traffic belonging to this access-group.
+         A value of '8' indicates that the inner VPT field is unaffected.
+         Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out')."
+    ::= { prvtSwAclIfAcgEntry 11 }
+
+prvtSwAclIfAcgDscp OBJECT-TYPE
+    SYNTAX      PrvtSwAclDscpTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The DSCP value to assign to traffic belonging to this access-group.
+         A value of '64' indicates that the DSCP field is not affected.
+         Only used when prvtSwAclIfAcgGroupType equals 'out'."
+    ::= { prvtSwAclIfAcgEntry 12 }
+
+prvtSwAclIfAcgColorGreenFc OBJECT-TYPE
+    SYNTAX      PrvtSwAclFcTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Map traffic marked as green from the ACG rate-limit to a Forwarding Class (FC).
+         The value 'none' indicates that the FC is not to be affected.
+         Only used when prvtSwAclIfAcgGroupType equals 'in'."
+    ::= { prvtSwAclIfAcgEntry 13 }
+
+prvtSwAclIfAcgColorYellowFc OBJECT-TYPE
+    SYNTAX      PrvtSwAclFcTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Map traffic marked as yellow from ACG rate-limit to a Forwarding Class (FC).
+         The value 'none' indicates that the FC is not to be affected.
+         Only used when prvtSwAclIfAcgGroupType equals 'in'."
+    ::= { prvtSwAclIfAcgEntry 14 }
+
+prvtSwAclIfAcgColorRedFc OBJECT-TYPE
+    SYNTAX      PrvtSwAclFcTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Map traffic marked as red from ACG rate-limit to a Forwarding Class (FC).
+         The value 'none' indicates that the FC is not to be affected.
+         Only used when prvtSwAclIfAcgGroupType equals 'in'."
+    ::= { prvtSwAclIfAcgEntry 15 }
+
+prvtSwAclIfAcgColorGreenVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Remark, with the specifed value, the VLAN priority field of frames for traffic
+         marked as green.
+         The value '8' indicates that the field should not be re-marked.
+         Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out')."
+    ::= { prvtSwAclIfAcgEntry 16 }
+
+prvtSwAclIfAcgColorYellowVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Remark, with the specifed value, the VLAN priority field of frames for traffic
+         marked as yellow.
+         The value '8' indicates that the field should not be re-marked.
+         Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out')."
+    ::= { prvtSwAclIfAcgEntry 17 }
+
+prvtSwAclIfAcgColorRedVpt OBJECT-TYPE
+    SYNTAX      PrvtSwAclVptTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Remark, with the specifed value, the VLAN priority field of frames for traffic
+         marked as green.
+         The value '8' indicates that the field should not be re-marked.
+         Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out')."
+    ::= { prvtSwAclIfAcgEntry 18 }
+
+prvtSwAclIfAcgColorGreenDscp OBJECT-TYPE
+    SYNTAX      PrvtSwAclDscpTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Remark, with the specifed value, the DSCP field of frames for traffic
+         marked as green.
+         A value of '64' indicates that the DSCP value should not be re-marked.
+         Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out')."
+    ::= { prvtSwAclIfAcgEntry 19 }
+
+prvtSwAclIfAcgColorYellowDscp OBJECT-TYPE
+    SYNTAX      PrvtSwAclDscpTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Remark, with the specifed value, the DSCP field of frames for traffic
+         marked as yellow.
+         Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out')."
+    ::= { prvtSwAclIfAcgEntry 20 }
+
+prvtSwAclIfAcgColorRedDscp OBJECT-TYPE
+    SYNTAX      PrvtSwAclDscpTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Remark, with the specifed value, the DSCP field of frames for traffic
+         marked as red.
+         Only used for egress ACL types (when prvtSwAclIfAcgGroupType equals 'out')."
+    ::= { prvtSwAclIfAcgEntry 21 }
+
+prvtSwAclIfAcgResetStats OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to reset statistics for this SAP access group.
+         Reads always return the value 'false'."
+    ::= { prvtSwAclIfAcgEntry 22 }
+
+prvtSwAclIfAcgRLimitTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclIfAcgRLimitEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to specify for this traffic flow which type of rate-limiting to use
+         and the parameters of the rate-limiting method.
+         Only one entry may exist (i.e. one rate-limiting method may be used) for a
+         particular traffic flow.
+         Not available for VLAN ACL types (when prvtSwAclIfAcgAclType equals 'vlan').
+         For a particular traffic flow, this table and prvtSwAclIfAcgFcTable are
+         mutually exclusive (i.e. a traffic flow is prohibited from having
+         an entry in this table and in prvtSwAclIfAcgFcTable concurrently)."
+    ::= { prvtSwAclIfAcg 2 }
+
+prvtSwAclIfAcgRLimitEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclIfAcgRLimitEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclIfAcgRLimitTable."
+    INDEX       { prvtSwAclIfAcgIndex, prvtSwAclIfAcgSeqId, 
+                  prvtSwAclIfAcgType, prvtSwAclIfAcgAclName, 
+                  prvtSwAclIfAcgAclType, prvtSwAclIfAcgRLimitType }
+    ::= { prvtSwAclIfAcgRLimitTable 1 }
+
+PrvtSwAclIfAcgRLimitEntry ::= SEQUENCE {
+    prvtSwAclIfAcgRLimitType        PrvtSwAclRateLimitType,
+    prvtSwAclIfAcgRLimitRowStatus   RowStatus,
+    prvtSwAclIfAcgRLimitCir         PrvtSwAclRateType,
+    prvtSwAclIfAcgRLimitCbs         PrvtSwAclBurstSizeType,
+    prvtSwAclIfAcgRLimitEbs         PrvtSwAclBurstSizeType,
+    prvtSwAclIfAcgRLimitPir         PrvtSwAclRateType,
+    prvtSwAclIfAcgRLimitPbs         PrvtSwAclBurstSizeType,
+    prvtSwAclIfAcgRLimitColorAware  TruthValue,
+    prvtSwAclIfAcgRLimitExceedAct   PrvtSwAclExceedAction
+}
+
+prvtSwAclIfAcgRLimitType OBJECT-TYPE
+    SYNTAX      PrvtSwAclRateLimitType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the type (single vs. dual) of rate-limiting to use."
+    ::= { prvtSwAclIfAcgRLimitEntry 1 }
+
+prvtSwAclIfAcgRLimitRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this rate limit function."
+    ::= { prvtSwAclIfAcgRLimitEntry 2 }
+
+prvtSwAclIfAcgRLimitCir OBJECT-TYPE
+    SYNTAX      PrvtSwAclRateType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Committed Information Rate."
+    ::= { prvtSwAclIfAcgRLimitEntry 3 }
+
+prvtSwAclIfAcgRLimitCbs OBJECT-TYPE
+    SYNTAX      PrvtSwAclBurstSizeType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Committed Burst Size."
+    ::= { prvtSwAclIfAcgRLimitEntry 4 }
+
+prvtSwAclIfAcgRLimitEbs OBJECT-TYPE
+    SYNTAX      PrvtSwAclBurstSizeType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Excess Burst Size.
+         Only applicable when using single rate limiting (prvtSwAclIfAcgRLimitType
+         equals 'single')."
+    ::= { prvtSwAclIfAcgRLimitEntry 5 }
+
+prvtSwAclIfAcgRLimitPir OBJECT-TYPE
+    SYNTAX      PrvtSwAclRateType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Peak Information Rate.
+         Only applicable when using dual rate limiting (prvtSwAclIfAcgRLimitType
+         equals 'dual').
+         When using dual rate limiting, prvtSwAclIfAcgRLimitPir
+         must be greater than or equal to prvtSwAclIfAcgRLimitCir."
+    ::= { prvtSwAclIfAcgRLimitEntry 6 }
+
+prvtSwAclIfAcgRLimitPbs OBJECT-TYPE
+    SYNTAX      PrvtSwAclBurstSizeType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Peak Burst Size.
+         Only applicable when using dual rate limiting (when
+         prvtSwAclIfAcgRLimitType equals 'dual')."
+    ::= { prvtSwAclIfAcgRLimitEntry 7 }
+
+prvtSwAclIfAcgRLimitColorAware OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable color aware traffic metering."
+    ::= { prvtSwAclIfAcgRLimitEntry 8 }
+
+prvtSwAclIfAcgRLimitExceedAct OBJECT-TYPE
+    SYNTAX      PrvtSwAclExceedAction
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action to perform when the condition is true.
+         'markRed' is not supported for all devices.
+         'markYellow' is not supported for dual rate-limit."
+    ::= { prvtSwAclIfAcgRLimitEntry 9 }
+
+prvtSwAclIfAcgRedirectTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclIfAcgRedirectEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to specify if this traffic flow should be redirected to
+         another interface.
+         Only one entry is allowed (i.e. only one redirect is permitted).
+         Only applicable to ingress ACL types (when prvtSwAclIfAcgAclType equals 'in')."
+    ::= { prvtSwAclIfAcg 3 }
+
+prvtSwAclIfAcgRedirectEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclIfAcgRedirectEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclIfAcgRedirectTable."
+    INDEX       { prvtSwAclIfAcgIndex, prvtSwAclIfAcgSeqId, 
+                  prvtSwAclIfAcgType, prvtSwAclIfAcgAclName, 
+                  prvtSwAclIfAcgAclType, prvtSwAclIfAcgRedirectIfIndex }
+    ::= { prvtSwAclIfAcgRedirectTable 1 }
+
+PrvtSwAclIfAcgRedirectEntry ::= SEQUENCE {
+    prvtSwAclIfAcgRedirectIfIndex       InterfaceIndex,
+    prvtSwAclIfAcgRedirectRowStatus     RowStatus
+}
+
+prvtSwAclIfAcgRedirectIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of a physical interface defined in the ifTable to which traffic should be redirected to."
+    ::= { prvtSwAclIfAcgRedirectEntry 1 }
+
+prvtSwAclIfAcgRedirectRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for prvtSwAclIfAcgRedirectTable."
+    ::= { prvtSwAclIfAcgRedirectEntry 2 }
+
+prvtSwAclIfAcgFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclIfAcgFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to assign parameters to a particular forwarding class within a traffic flow.
+         Only one entry is allowed.
+         Only applicable to ingress ACL types (when prvtSwAclIfAcgAclType equals 'in').
+         For a particular traffic flow, this table and prvtSwAclIfAcgRLimitTable are
+         mutually exclusive (i.e. a traffic flow is prohibited from having
+         an entry in this table and in prvtSwAclIfAcgFcTable at the same time)."
+    ::= { prvtSwAclIfAcg 4 }
+
+prvtSwAclIfAcgFcEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclIfAcgFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclIfAcgFcTable."
+    INDEX       { prvtSwAclIfAcgIndex, prvtSwAclIfAcgSeqId, 
+                  prvtSwAclIfAcgType, prvtSwAclIfAcgAclName, 
+                  prvtSwAclIfAcgAclType, prvtSwAclIfAcgFcId }
+    ::= { prvtSwAclIfAcgFcTable 1 }
+
+PrvtSwAclIfAcgFcEntry ::= SEQUENCE {
+    prvtSwAclIfAcgFcId          PrvtSwAclFcType,
+    prvtSwAclIfAcgFcRowStatus   RowStatus,
+    prvtSwAclIfAcgFcColor       PrvtSwAclColorType
+}
+
+prvtSwAclIfAcgFcId OBJECT-TYPE
+    SYNTAX      PrvtSwAclFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The forwarding class that this row applies to."
+    ::= { prvtSwAclIfAcgFcEntry 1 }
+
+prvtSwAclIfAcgFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this forwarding class."
+    ::= { prvtSwAclIfAcgFcEntry 2 }
+
+prvtSwAclIfAcgFcColor OBJECT-TYPE
+    SYNTAX      PrvtSwAclColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to assign to traffic belonging to this forwarding class.
+         Color red is not supported for all devices"
+    ::= { prvtSwAclIfAcgFcEntry 3 }
+
+prvtSwAclIfAcgMonPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclIfAcgMonPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to assign a monitoring profile to a traffic flow.
+         Only one profile may be assigned per traffic flow.
+         Only applicable to ingress ACL types (when prvtSwAclIfAcgAclType equals 'in')."
+    ::= { prvtSwAclIfAcg 5 }
+
+prvtSwAclIfAcgMonPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclIfAcgMonPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclIfAcgMonPrfTable."
+    INDEX       { prvtSwAclIfAcgIndex, prvtSwAclIfAcgSeqId, 
+                  prvtSwAclIfAcgType, prvtSwAclIfAcgAclName, 
+                  prvtSwAclIfAcgAclType, prvtSwAclMonPrfId }
+    ::= { prvtSwAclIfAcgMonPrfTable 1 }
+
+PrvtSwAclIfAcgMonPrfEntry ::= SEQUENCE {
+    prvtSwAclIfAcgMonPrfRowStatus       RowStatus,
+    prvtSwAclIfAcgMonPrfMatchF          Counter64,
+    prvtSwAclIfAcgMonPrfMatchB          Counter64,
+    prvtSwAclIfAcgMonPrfGreenF          Counter64,
+    prvtSwAclIfAcgMonPrfGreenB          Counter64,
+    prvtSwAclIfAcgMonPrfNotGreenF       Counter64,
+    prvtSwAclIfAcgMonPrfNotGreenB       Counter64,
+    prvtSwAclIfAcgMonPrfYellowF         Counter64,
+    prvtSwAclIfAcgMonPrfYellowB         Counter64,
+    prvtSwAclIfAcgMonPrfRedF            Counter64,
+    prvtSwAclIfAcgMonPrfRedB            Counter64,
+    prvtSwAclIfAcgMonPrfNotRedF         Counter64,
+    prvtSwAclIfAcgMonPrfNotRedB         Counter64,
+    prvtSwAclIfAcgMonPrfRateMatchF      Counter64,
+    prvtSwAclIfAcgMonPrfRateMatchB      Counter64,
+    prvtSwAclIfAcgMonPrfRateGreenF      Counter64,
+    prvtSwAclIfAcgMonPrfRateGreenB      Counter64,
+    prvtSwAclIfAcgMonPrfRateNotGreenF   Counter64,
+    prvtSwAclIfAcgMonPrfRateNotGreenB   Counter64,
+    prvtSwAclIfAcgMonPrfRateYellowF     Counter64,
+    prvtSwAclIfAcgMonPrfRateYellowB     Counter64,
+    prvtSwAclIfAcgMonPrfRateRedF        Counter64,
+    prvtSwAclIfAcgMonPrfRateRedB        Counter64,
+    prvtSwAclIfAcgMonPrfRateNotRedF     Counter64,
+    prvtSwAclIfAcgMonPrfRateNotRedB     Counter64
+}
+
+prvtSwAclIfAcgMonPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this monitoring profile."
+    ::= { prvtSwAclIfAcgMonPrfEntry 1 }
+
+prvtSwAclIfAcgMonPrfMatchF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of traffic matching this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 2 }
+
+prvtSwAclIfAcgMonPrfMatchB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of traffic matching this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 3 }
+
+prvtSwAclIfAcgMonPrfGreenF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of green traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 4 }
+
+prvtSwAclIfAcgMonPrfGreenB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of green traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 5 }
+
+prvtSwAclIfAcgMonPrfNotGreenF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of non-green traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 6 }
+
+prvtSwAclIfAcgMonPrfNotGreenB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of non-green traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 7 }
+
+prvtSwAclIfAcgMonPrfYellowF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of yellow traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 8 }
+
+prvtSwAclIfAcgMonPrfYellowB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of yellow traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 9 }
+
+prvtSwAclIfAcgMonPrfRedF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of red traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 10 }
+
+prvtSwAclIfAcgMonPrfRedB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of red traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 11 }
+
+prvtSwAclIfAcgMonPrfNotRedF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of non-red traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 12 }
+
+prvtSwAclIfAcgMonPrfNotRedB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of non-red traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 13 }
+
+prvtSwAclIfAcgMonPrfRateMatchF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of traffic matching this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 14 }
+
+prvtSwAclIfAcgMonPrfRateMatchB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of traffic matching this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 15 }
+
+prvtSwAclIfAcgMonPrfRateGreenF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of green traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 16 }
+
+prvtSwAclIfAcgMonPrfRateGreenB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of green traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 17 }
+
+prvtSwAclIfAcgMonPrfRateNotGreenF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of non-green traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 18 }
+
+prvtSwAclIfAcgMonPrfRateNotGreenB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of non-green traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 19 }
+
+prvtSwAclIfAcgMonPrfRateYellowF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of yellow traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 20 }
+
+prvtSwAclIfAcgMonPrfRateYellowB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of yellow traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 21 }
+
+prvtSwAclIfAcgMonPrfRateRedF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of red traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 22 }
+
+prvtSwAclIfAcgMonPrfRateRedB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of red traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 23 }
+
+prvtSwAclIfAcgMonPrfRateNotRedF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of non-red traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 24 }
+
+prvtSwAclIfAcgMonPrfRateNotRedB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of non-red traffic belonging to this traffic flow."
+    ::= { prvtSwAclIfAcgMonPrfEntry 25 }
+
+prvtSwAclIfAcgRestrictEgForwardingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclIfAcgRestrictEgForwardingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to specify if this traffic flow should be forwarded to
+         another interface.All the other interfaces will be blocked.
+         Only applicable to ingress ACL types (when prvtSwAclIfAcgAclType equals 'in')."
+    ::= { prvtSwAclIfAcg 6 }
+
+prvtSwAclIfAcgRestrictEgForwardingEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclIfAcgRestrictEgForwardingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclIfAcgRestrictEgForwardingTable."
+    INDEX       { prvtSwAclIfAcgIndex, prvtSwAclIfAcgSeqId, 
+                  prvtSwAclIfAcgType, prvtSwAclIfAcgAclName, 
+                  prvtSwAclIfAcgAclType, 
+                  prvtSwAclIfAcgRestrictEgForwIfIndex }
+    ::= { prvtSwAclIfAcgRestrictEgForwardingTable 1 }
+
+PrvtSwAclIfAcgRestrictEgForwardingEntry ::= SEQUENCE {
+    prvtSwAclIfAcgRestrictEgForwIfIndex     InterfaceIndex,
+    prvtSwAclIfAcgRestrictEgForwRowStatus   RowStatus
+}
+
+prvtSwAclIfAcgRestrictEgForwIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of a physical interface defined in the ifTable to which traffic should be forwared to."
+    ::= { prvtSwAclIfAcgRestrictEgForwardingEntry 1 }
+
+prvtSwAclIfAcgRestrictEgForwRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for prvtSwAclIfAcgRestrictEgForwardingTable."
+    ::= { prvtSwAclIfAcgRestrictEgForwardingEntry 2 }
+
+prvtSwAclSaps OBJECT IDENTIFIER
+    ::= { prvtSwAclObjects 4 }
+
+prvtSwAclSapAcgTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclSapAcgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table creates and controls the properties of traffic flows belonging to
+         SAP interfaces.
+         Up to 250 entries are supported per SAP (i.e. per prvtSwAclSapServiceId,
+         prvtSwAclSapIfIndex, prvtSwAclSapEncapValue combination).
+         The key combination (serviceId, sapPortId, sapEncapValue, prvtSwAclSapAcgSeqId)
+         must be unique (i.e. no more than one entry can exist with the same SAP
+         and sequence-id combination).
+         Notes:
+          1. access-groups are not supported on VPWS SAPs.
+          2. Only ingress ACL types (prvtSwAclSapAcgAclType equals 'in') are supported on SAPs."
+    ::= { prvtSwAclSaps 1 }
+
+prvtSwAclSapAcgEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclSapAcgEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclSapAcgTable."
+    INDEX       { serviceId, sapPortId, sapEncapValue, 
+                  prvtSwAclSapAcgSeqId, prvtSwAclSapAcgType, 
+                  prvtSwAclSapAcgAclName, prvtSwAclSapAcgAclType }
+    ::= { prvtSwAclSapAcgTable 1 }
+
+PrvtSwAclSapAcgEntry ::= SEQUENCE {
+    prvtSwAclSapAcgSeqId            Unsigned32,
+    prvtSwAclSapAcgType             PrvtSwAclAcgType,
+    prvtSwAclSapAcgAclName          PrvtSwAclNameType,
+    prvtSwAclSapAcgAclType          PrvtSwAclGroupType,
+    prvtSwAclSapAcgRowStatus        RowStatus,
+    prvtSwAclSapAcgColorGreenFc     PrvtSwAclFcTypeOrNone,
+    prvtSwAclSapAcgColorYellowFc    PrvtSwAclFcTypeOrNone,
+    prvtSwAclSapAcgColorRedFc       PrvtSwAclFcTypeOrNone,
+    prvtSwAclSapAcgResetStats       TruthValue
+}
+
+prvtSwAclSapAcgSeqId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the sequence (order/priority) in which this access group will be applied."
+    ::= { prvtSwAclSapAcgEntry 4 }
+
+prvtSwAclSapAcgType OBJECT-TYPE
+    SYNTAX      PrvtSwAclAcgType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type (e.g. ipStd, ipExt, mac, etherType) of access group that this row applies to."
+    ::= { prvtSwAclSapAcgEntry 5 }
+
+prvtSwAclSapAcgAclName OBJECT-TYPE
+    SYNTAX      PrvtSwAclNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The name of the access list that this row applies to.
+         This must match the name of an ACL created with the type specified by prvtSwAclSapAcgType.
+         (i.e. it must match one of prvtSwAclStdName, prvtSwAclExtName, prvtSwAclMacName,
+         prvtSwAclEthName corresponding to the type specified in prvtSwAclSapAcgType.)"
+    ::= { prvtSwAclSapAcgEntry 6 }
+
+prvtSwAclSapAcgAclType OBJECT-TYPE
+    SYNTAX      PrvtSwAclGroupType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The type (e.g. in, out, vlan) of access list that this row applies to."
+    ::= { prvtSwAclSapAcgEntry 7 }
+
+prvtSwAclSapAcgRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this SAP's access-control group."
+    ::= { prvtSwAclSapAcgEntry 8 }
+
+prvtSwAclSapAcgColorGreenFc OBJECT-TYPE
+    SYNTAX      PrvtSwAclFcTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Map traffic marked as green from the ACG rate-limit to a Forwarding Class (FC).
+         The value 'none' indicates that the FC is not to be affected.
+         Only used when prvtSwAclSapAcgGroupType equals 'in'."
+    ::= { prvtSwAclSapAcgEntry 13 }
+
+prvtSwAclSapAcgColorYellowFc OBJECT-TYPE
+    SYNTAX      PrvtSwAclFcTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Map traffic marked as yellow from ACG rate-limit to a Forwarding Class (FC).
+         The value 'none' indicates that the FC is not to be affected.
+         Only used when prvtSwAclSapAcgGroupType equals 'in'."
+    ::= { prvtSwAclSapAcgEntry 14 }
+
+prvtSwAclSapAcgColorRedFc OBJECT-TYPE
+    SYNTAX      PrvtSwAclFcTypeOrNone
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Map traffic marked as red from ACG rate-limit to a Forwarding Class (FC).
+         The value 'none' indicates that the FC is not to be affected.
+         Only used when prvtSwAclSapAcgGroupType equals 'in'."
+    ::= { prvtSwAclSapAcgEntry 15 }
+
+prvtSwAclSapAcgResetStats OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to reset the statistics for this SAP access group.
+         Reads always return the value 'false'."
+    ::= { prvtSwAclSapAcgEntry 16 }
+
+prvtSwAclSapAcg OBJECT IDENTIFIER
+    ::= { prvtSwAclSaps 2 }
+
+prvtSwAclSapAcgRLimitTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclSapAcgRLimitEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to specify for this traffic flow which type of rate-limiting to use
+         and the parameters of the rate-limiting method.
+         Only one entry may exist (i.e. one rate-limiting method may be used) for a
+         particular traffic flow.
+         Not available for VLAN ACL types (when prvtSwAclSapAcgAclType equals 'vlan').
+         For a particular traffic flow, this table and prvtSwAclSapAcgFcTable are
+         mutually exclusive (i.e. a traffic flow is prohibited from having
+         an entry in this table and in prvtSwAclSapAcgFcTable concurrently)."
+    ::= { prvtSwAclSapAcg 2 }
+
+prvtSwAclSapAcgRLimitEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclSapAcgRLimitEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclSapAcgRLimitTable."
+    INDEX       { serviceId, sapPortId, sapEncapValue, 
+                  prvtSwAclSapAcgSeqId, prvtSwAclSapAcgType, 
+                  prvtSwAclSapAcgAclName, prvtSwAclSapAcgAclType, 
+                  prvtSwAclSapAcgRLimitType }
+    ::= { prvtSwAclSapAcgRLimitTable 1 }
+
+PrvtSwAclSapAcgRLimitEntry ::= SEQUENCE {
+    prvtSwAclSapAcgRLimitType           PrvtSwAclRateLimitType,
+    prvtSwAclSapAcgRLimitRowStatus      RowStatus,
+    prvtSwAclSapAcgRLimitCir            PrvtSwAclRateType,
+    prvtSwAclSapAcgRLimitCbs            PrvtSwAclBurstSizeType,
+    prvtSwAclSapAcgRLimitEbs            PrvtSwAclBurstSizeType,
+    prvtSwAclSapAcgRLimitPir            PrvtSwAclRateType,
+    prvtSwAclSapAcgRLimitPbs            PrvtSwAclBurstSizeType,
+    prvtSwAclSapAcgRLimitColorAware     TruthValue,
+    prvtSwAclSapAcgRLimitExceedAct      PrvtSwAclExceedAction
+}
+
+prvtSwAclSapAcgRLimitType OBJECT-TYPE
+    SYNTAX      PrvtSwAclRateLimitType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the type (single vs. dual) of rate-limiting to use."
+    ::= { prvtSwAclSapAcgRLimitEntry 1 }
+
+prvtSwAclSapAcgRLimitRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this rate limit function."
+    ::= { prvtSwAclSapAcgRLimitEntry 2 }
+
+prvtSwAclSapAcgRLimitCir OBJECT-TYPE
+    SYNTAX      PrvtSwAclRateType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Committed Information Rate."
+    ::= { prvtSwAclSapAcgRLimitEntry 3 }
+
+prvtSwAclSapAcgRLimitCbs OBJECT-TYPE
+    SYNTAX      PrvtSwAclBurstSizeType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Committed Burst Size."
+    ::= { prvtSwAclSapAcgRLimitEntry 4 }
+
+prvtSwAclSapAcgRLimitEbs OBJECT-TYPE
+    SYNTAX      PrvtSwAclBurstSizeType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Excess Burst Size.
+         Only applicable when using single rate limiting (prvtSwAclSapAcgRLimitType
+         equals 'single')."
+    ::= { prvtSwAclSapAcgRLimitEntry 5 }
+
+prvtSwAclSapAcgRLimitPir OBJECT-TYPE
+    SYNTAX      PrvtSwAclRateType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Peak Information Rate.
+         Only applicable when using dual rate limiting (prvtSwAclSapAcgRLimitType
+         equals 'dual').
+         When using dual rate limiting, prvtSwAclSapAcgRLimitPir
+         must be greater than or equal to prvtSwAclSapAcgRLimitCir."
+    ::= { prvtSwAclSapAcgRLimitEntry 6 }
+
+prvtSwAclSapAcgRLimitPbs OBJECT-TYPE
+    SYNTAX      PrvtSwAclBurstSizeType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The Peak Burst Size.
+         Only applicable when using dual rate limiting (when
+         prvtSwAclSapAcgRLimitType equals 'dual')."
+    ::= { prvtSwAclSapAcgRLimitEntry 7 }
+
+prvtSwAclSapAcgRLimitColorAware OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Set to 'true' to enable color aware traffic metering."
+    ::= { prvtSwAclSapAcgRLimitEntry 8 }
+
+prvtSwAclSapAcgRLimitExceedAct OBJECT-TYPE
+    SYNTAX      PrvtSwAclExceedAction
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The action to perform when the condition is true."
+    ::= { prvtSwAclSapAcgRLimitEntry 9 }
+
+prvtSwAclSapAcgRedirectTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclSapAcgRedirectEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to specify if this traffic flow should be redirected to
+         another interface.
+         Only one entry is allowed (i.e. only one redirect is permitted).
+         Only applicable to ingress ACL types (when prvtSwAclSapAcgAclType equals 'in')."
+    ::= { prvtSwAclSapAcg 3 }
+
+prvtSwAclSapAcgRedirectEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclSapAcgRedirectEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclSapAcgRedirectTable."
+    INDEX       { serviceId, sapPortId, sapEncapValue, 
+                  prvtSwAclSapAcgSeqId, prvtSwAclSapAcgType, 
+                  prvtSwAclSapAcgAclName, prvtSwAclSapAcgAclType, 
+                  prvtSwAclSapAcgRedirectIfIndex }
+    ::= { prvtSwAclSapAcgRedirectTable 1 }
+
+PrvtSwAclSapAcgRedirectEntry ::= SEQUENCE {
+    prvtSwAclSapAcgRedirectIfIndex      InterfaceIndex,
+    prvtSwAclSapAcgRedirectRowStatus    RowStatus
+}
+
+prvtSwAclSapAcgRedirectIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of a physical interface defined in the ifTable to which traffic should be redirected to."
+    ::= { prvtSwAclSapAcgRedirectEntry 1 }
+
+prvtSwAclSapAcgRedirectRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for prvtSwAclSapAcgRedirectTable."
+    ::= { prvtSwAclSapAcgRedirectEntry 2 }
+
+prvtSwAclSapAcgFcTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclSapAcgFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to assign parameters to a particular forwarding class within a traffic flow.
+         Only one entry is allowed.
+         Only applicable to ingress ACL types (when prvtSwAclSapAcgAclType equals 'in').
+         For a particular traffic flow, this table and prvtSwAclSapAcgRLimitTable are
+         mutually exclusive (i.e. a traffic flow is prohibited from having
+         an entry in this table and in prvtSwAclSapAcgFcTable at the same time)."
+    ::= { prvtSwAclSapAcg 4 }
+
+prvtSwAclSapAcgFcEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclSapAcgFcEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclSapAcgFcTable."
+    INDEX       { serviceId, sapPortId, sapEncapValue, 
+                  prvtSwAclSapAcgSeqId, prvtSwAclSapAcgType, 
+                  prvtSwAclSapAcgAclName, prvtSwAclSapAcgAclType, 
+                  prvtSwAclSapAcgFcId }
+    ::= { prvtSwAclSapAcgFcTable 1 }
+
+PrvtSwAclSapAcgFcEntry ::= SEQUENCE {
+    prvtSwAclSapAcgFcId         PrvtSwAclFcType,
+    prvtSwAclSapAcgFcRowStatus  RowStatus,
+    prvtSwAclSapAcgFcColor      PrvtSwAclColorType
+}
+
+prvtSwAclSapAcgFcId OBJECT-TYPE
+    SYNTAX      PrvtSwAclFcType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The forwarding class that this row applies to."
+    ::= { prvtSwAclSapAcgFcEntry 1 }
+
+prvtSwAclSapAcgFcRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this forwarding class."
+    ::= { prvtSwAclSapAcgFcEntry 2 }
+
+prvtSwAclSapAcgFcColor OBJECT-TYPE
+    SYNTAX      PrvtSwAclColorType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The color to assign to traffic belonging to this forwarding class.
+         Color red is not supported for all devices"
+    ::= { prvtSwAclSapAcgFcEntry 3 }
+
+prvtSwAclSapAcgMonPrfTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclSapAcgMonPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to assign a monitoring profile to a traffic flow.
+         Only one profile may be assigned per traffic flow.
+         Only applicable to ingress ACL types (when prvtSwAclSapAcgAclType equals 'in')."
+    ::= { prvtSwAclSapAcg 5 }
+
+prvtSwAclSapAcgMonPrfEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclSapAcgMonPrfEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclSapAcgMonPrfTable."
+    INDEX       { serviceId, sapPortId, sapEncapValue, 
+                  prvtSwAclSapAcgSeqId, prvtSwAclSapAcgType, 
+                  prvtSwAclSapAcgAclName, prvtSwAclSapAcgAclType, 
+                  prvtSwAclMonPrfId }
+    ::= { prvtSwAclSapAcgMonPrfTable 1 }
+
+PrvtSwAclSapAcgMonPrfEntry ::= SEQUENCE {
+    prvtSwAclSapAcgMonPrfRowStatus      RowStatus,
+    prvtSwAclSapAcgMonPrfMatchF         Counter64,
+    prvtSwAclSapAcgMonPrfMatchB         Counter64,
+    prvtSwAclSapAcgMonPrfGreenF         Counter64,
+    prvtSwAclSapAcgMonPrfGreenB         Counter64,
+    prvtSwAclSapAcgMonPrfNotGreenF      Counter64,
+    prvtSwAclSapAcgMonPrfNotGreenB      Counter64,
+    prvtSwAclSapAcgMonPrfYellowF        Counter64,
+    prvtSwAclSapAcgMonPrfYellowB        Counter64,
+    prvtSwAclSapAcgMonPrfRedF           Counter64,
+    prvtSwAclSapAcgMonPrfRedB           Counter64,
+    prvtSwAclSapAcgMonPrfNotRedF        Counter64,
+    prvtSwAclSapAcgMonPrfNotRedB        Counter64,
+    prvtSwAclSapAcgMonPrfRateMatchF     Counter64,
+    prvtSwAclSapAcgMonPrfRateMatchB     Counter64,
+    prvtSwAclSapAcgMonPrfRateGreenF     Counter64,
+    prvtSwAclSapAcgMonPrfRateGreenB     Counter64,
+    prvtSwAclSapAcgMonPrfRateNotGreenF  Counter64,
+    prvtSwAclSapAcgMonPrfRateNotGreenB  Counter64,
+    prvtSwAclSapAcgMonPrfRateYellowF    Counter64,
+    prvtSwAclSapAcgMonPrfRateYellowB    Counter64,
+    prvtSwAclSapAcgMonPrfRateRedF       Counter64,
+    prvtSwAclSapAcgMonPrfRateRedB       Counter64,
+    prvtSwAclSapAcgMonPrfRateNotRedF    Counter64,
+    prvtSwAclSapAcgMonPrfRateNotRedB    Counter64
+}
+
+prvtSwAclSapAcgMonPrfRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for this monitoring profile."
+    ::= { prvtSwAclSapAcgMonPrfEntry 1 }
+
+prvtSwAclSapAcgMonPrfMatchF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of traffic matching this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 2 }
+
+prvtSwAclSapAcgMonPrfMatchB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of traffic matching this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 3 }
+
+prvtSwAclSapAcgMonPrfGreenF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of green traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 4 }
+
+prvtSwAclSapAcgMonPrfGreenB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of green traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 5 }
+
+prvtSwAclSapAcgMonPrfNotGreenF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of non-green traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 6 }
+
+prvtSwAclSapAcgMonPrfNotGreenB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of non-green traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 7 }
+
+prvtSwAclSapAcgMonPrfYellowF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of yellow traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 8 }
+
+prvtSwAclSapAcgMonPrfYellowB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of yellow traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 9 }
+
+prvtSwAclSapAcgMonPrfRedF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of red traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 10 }
+
+prvtSwAclSapAcgMonPrfRedB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of red traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 11 }
+
+prvtSwAclSapAcgMonPrfNotRedF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of frames of non-red traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 12 }
+
+prvtSwAclSapAcgMonPrfNotRedB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of bytes of non-red traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 13 }
+
+prvtSwAclSapAcgMonPrfRateMatchF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of traffic matching this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 14 }
+
+prvtSwAclSapAcgMonPrfRateMatchB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of traffic matching this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 15 }
+
+prvtSwAclSapAcgMonPrfRateGreenF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of green traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 16 }
+
+prvtSwAclSapAcgMonPrfRateGreenB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of green traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 17 }
+
+prvtSwAclSapAcgMonPrfRateNotGreenF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of non-green traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 18 }
+
+prvtSwAclSapAcgMonPrfRateNotGreenB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of non-green traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 19 }
+
+prvtSwAclSapAcgMonPrfRateYellowF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of yellow traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 20 }
+
+prvtSwAclSapAcgMonPrfRateYellowB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of yellow traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 21 }
+
+prvtSwAclSapAcgMonPrfRateRedF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of red traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 22 }
+
+prvtSwAclSapAcgMonPrfRateRedB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of red traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 23 }
+
+prvtSwAclSapAcgMonPrfRateNotRedF OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in frames per second, of non-red traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 24 }
+
+prvtSwAclSapAcgMonPrfRateNotRedB OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The rate, in bytes per second, of non-red traffic belonging to this traffic flow."
+    ::= { prvtSwAclSapAcgMonPrfEntry 25 }
+
+prvtSwAclSapAcgRestrictEgForwardingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtSwAclSapAcgRestrictEgForwardingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Used to specify if this traffic flow should be forwarded to
+         another interface.All the other interfaces will be blocked.
+         Only applicable to ingress ACL types (when prvtSwAclSapAcgAclType equals 'in')."
+    ::= { prvtSwAclSapAcg 6 }
+
+prvtSwAclSapAcgRestrictEgForwardingEntry OBJECT-TYPE
+    SYNTAX      PrvtSwAclSapAcgRestrictEgForwardingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtSwAclSapAcgRestrictEgForwardingTable."
+    INDEX       { serviceId, sapPortId, sapEncapValue, 
+                  prvtSwAclSapAcgSeqId, prvtSwAclSapAcgType, 
+                  prvtSwAclSapAcgAclName, prvtSwAclSapAcgAclType, 
+                  prvtSwAclSapAcgRestrictEgForwIfIndex }
+    ::= { prvtSwAclSapAcgRestrictEgForwardingTable 1 }
+
+PrvtSwAclSapAcgRestrictEgForwardingEntry ::= SEQUENCE {
+    prvtSwAclSapAcgRestrictEgForwIfIndex    InterfaceIndex,
+    prvtSwAclSapAcgRestrictEgForwRowStatus  RowStatus
+}
+
+prvtSwAclSapAcgRestrictEgForwIfIndex OBJECT-TYPE
+    SYNTAX      InterfaceIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ifIndex of a physical interface defined in the ifTable to which traffic should be forwared to."
+    ::= { prvtSwAclSapAcgRestrictEgForwardingEntry 1 }
+
+prvtSwAclSapAcgRestrictEgForwRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus for prvtSwAclSapAcgRestrictEgForwardingTable."
+    ::= { prvtSwAclSapAcgRestrictEgForwardingEntry 2 }
+
+prvtSwAclIfAcgApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclIfAcgRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 1 }
+
+prvtSwAclIfAcgRLimitApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclIfAcgRLimitRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 2 }
+
+prvtSwAclIfAcgRedirectApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclIfAcgRedirectRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 3 }
+
+prvtSwAclIfAcgFcApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclIfAcgFcRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 4 }
+
+prvtSwAclIfAcgMonPrfApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclIfAcgMonPrfRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 5 }
+
+prvtSwAclSapAcgApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclSapAcgRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 6 }
+
+prvtSwAclSapAcgRLimitApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclSapAcgRLimitRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 7 }
+
+prvtSwAclSapAcgRedirectApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclSapAcgRedirectRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 8 }
+
+prvtSwAclSapAcgFcApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclSapAcgFcRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 9 }
+
+prvtSwAclSapAcgMonPrfApplyFailed NOTIFICATION-TYPE
+    OBJECTS     { prvtSwAclSapAcgMonPrfRowStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Access group is not properly applied in hardware.
+         This means that traffic will not be filtered as
+         expected. User should either remove this access
+         group or rearrange other access groups."
+    ::= { prvtSwAclNotifications 10 }
+
+END -- end of module PRVT-SWITCH-ACCESS-LIST-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SWITCH-IPVLAN-MIB b/MIBS/telco-systems/binox/PRVT-SWITCH-IPVLAN-MIB
new file mode 100644
index 0000000..378ec39
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SWITCH-IPVLAN-MIB
@@ -0,0 +1,228 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-IPVLAN-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SWITCH-IPVLAN-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ipSwitch
+        FROM PRVT-SWITCH-MIB
+    dot1qVlanIndex
+        FROM Q-BRIDGE-MIB
+    Integer32, IpAddress, MODULE-IDENTITY, OBJECT-TYPE
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtSwitchIpVlanMIB MODULE-IDENTITY
+    LAST-UPDATED "200910050000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The IpVlan MIB module that controls the assignment
+         of IP subnets to VLANs in L3 switches."
+    REVISION    "200910050000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { ipSwitch 2 }
+
+
+ipInterface OBJECT IDENTIFIER
+    ::= { prvtSwitchIpVlanMIB 1 }
+
+ipInterfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table controls the creation of IP interfaces (subnets)."
+    ::= { ipInterface 1 }
+
+ipInterfaceEntry OBJECT-TYPE
+    SYNTAX      IpInterfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry within the ipInterfaceTable."
+    INDEX       { ipInterfaceName }
+    ::= { ipInterfaceTable 1 }
+
+IpInterfaceEntry ::= SEQUENCE {
+    ipInterfaceName         OCTET STRING,
+    ipInterfaceIndex        Integer32,
+    ipInterfaceIpAddress    IpAddress,
+    ipInterfaceSubnetMask   IpAddress,
+    ipInterfaceRowStatus    RowStatus,
+    ipInterfaceIPv6Address  OCTET STRING
+}
+
+ipInterfaceName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..32))
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This object identifies the name of the IP interface, serves as an
+         index to this table.
+         Valid names are system-dependent. Some common examples are swX, and
+         loX, where X represents an integer from 0 to 9."
+    ::= { ipInterfaceEntry 1 }
+
+ipInterfaceIndex OBJECT-TYPE
+    SYNTAX      Integer32 (1..2147483647)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This object identifies the index of the IP interface.
+         This is the same index as ifIndex from ifTable, which is also the
+         same as ipAdEntIfIndex from MIB-II (ipAddrTable)."
+    ::= { ipInterfaceEntry 2 }
+
+ipInterfaceIpAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object has the value of the switch IP address in this subnet."
+    ::= { ipInterfaceEntry 3 }
+
+ipInterfaceSubnetMask OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object together with ipInterfaceIpAddress forms the IP
+         subnet, assigned to this IP interface. In the case that ipInterfaceIpAddress
+         has the value of 0.0.0.0, this object will be ignored."
+    ::= { ipInterfaceEntry 4 }
+
+ipInterfaceRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object indicates the row status, and enables the creation and
+         deletion of rows in this table. See SNMPv2-TC for more information."
+    ::= { ipInterfaceEntry 5 }
+
+ipInterfaceIPv6Address OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object indicated the IPv6 address of the interface."
+    ::= { ipInterfaceEntry 6 }
+
+ipVlan OBJECT IDENTIFIER
+    ::= { prvtSwitchIpVlanMIB 2 }
+
+ipVlanTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table extends the table dot1qVlanStaticTable from Q-BRIDGE-MIB.
+         It gives a connection between the IP Interface and the IP VLAN."
+    ::= { ipVlan 1 }
+
+ipVlanEntry OBJECT-TYPE
+    SYNTAX      IpVlanEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry within the ipVlanTable."
+    INDEX       { dot1qVlanIndex, ipInterfaceName }
+    ::= { ipVlanTable 1 }
+
+IpVlanEntry ::= SEQUENCE {
+    ipVlanStatus    INTEGER
+}
+
+ipVlanStatus OBJECT-TYPE
+    SYNTAX      INTEGER { attached(1), detached(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object shows the VLAN on which the interface in the index
+         of the entry is installed and vice versa."
+    ::= { ipVlanEntry 1 }
+
+ipVlanManagementTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF IpVlanManagementEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "This table extends the table dot1qVlanStaticTable from Q-BRIDGE-MIB."
+    ::= { ipVlan 2 }
+
+ipVlanManagementEntry OBJECT-TYPE
+    SYNTAX      IpVlanManagementEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry within the ipVlanManagementTable."
+    INDEX       { ipVlanManagementVlanId }
+    ::= { ipVlanManagementTable 1 }
+
+IpVlanManagementEntry ::= SEQUENCE {
+    ipVlanManagementVlanId  Integer32,
+    ipVlanManagementStatus  TruthValue
+}
+
+ipVlanManagementVlanId OBJECT-TYPE
+    SYNTAX      Integer32 (1..4092)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Vlan id"
+    ::= { ipVlanManagementEntry 1 }
+
+ipVlanManagementStatus OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object shows if Vlan manageble"
+    ::= { ipVlanManagementEntry 2 }
+
+END -- end of module PRVT-SWITCH-IPVLAN-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SWITCH-MIB b/MIBS/telco-systems/binox/PRVT-SWITCH-MIB
new file mode 100644
index 0000000..a03bf71
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SWITCH-MIB
@@ -0,0 +1,1065 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SWITCH-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SWITCH-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    prvt-products
+        FROM PRVT-VENDORDEF-MIB
+    dot1qTpFdbStatus
+        FROM Q-BRIDGE-MIB
+    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    TruthValue
+        FROM SNMPv2-TC;
+
+prvtSwitchMIB MODULE-IDENTITY
+    LAST-UPDATED "201508030000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The switch MIB module for managing internal switch parameters"
+    REVISION    "201508030000Z"
+    DESCRIPTION 
+        "add prvtDuplicatedMACAddressAlarm,unauthorizedAccessViaCLI"
+    REVISION    "201507150000Z"
+    DESCRIPTION 
+        "add tMarc3306"
+    REVISION    "201506230000Z"
+    DESCRIPTION 
+        "add tatca510b"
+    REVISION    "201502220000Z"
+    DESCRIPTION 
+        "add tMarc3308"
+    REVISION    "201412300000Z"
+    DESCRIPTION 
+        "add tatca510"
+    REVISION    "201409180000Z"
+    DESCRIPTION 
+        "add tMarc3348s2"
+    REVISION    "201408270000Z"
+    DESCRIPTION 
+        "add cMetro-100"
+    REVISION    "201404010000Z"
+    DESCRIPTION 
+        "add m10GBASECXSMSFPPLUS (75),m10GBASECXMMSFPPLUS (76)"
+    REVISION    "201403270000Z"
+    DESCRIPTION 
+        "add m10GBaseZXSMSFPPLUS (67),m10GBaseZXMMSFPPLUS (68),
+         m10GBaseXDSMSFPPLUS (69), m10GBaseXDMMSFPPLUS (70),
+         m10GBaseLXSMSFPPLUS (71), m10GBaseLXMMSFPPLUS (72),
+         m10GBaseDWDMSMSFPPLUS (73), m10GBaseDWDMMMSFPPLUS (74)"
+    REVISION    "201403120000Z"
+    DESCRIPTION 
+        "add tMetro8064S, tMarc334SH"
+    REVISION    "201401270000Z"
+    DESCRIPTION 
+        "add tMarc3312SCH"
+    REVISION    "201401200000Z"
+    DESCRIPTION 
+        "add tMarc3312WD, tMarc3348WD"
+    REVISION    "201401070000Z"
+    DESCRIPTION 
+        "add tMarc3348WDB"
+    REVISION    "201311200000Z"
+    DESCRIPTION 
+        "add tMarc3312WDB"
+    REVISION    "201309190000Z"
+    DESCRIPTION 
+        "configL2IfaceEthertype"
+    REVISION    "201309120000Z"
+    DESCRIPTION 
+        "configL2IfaceMacAddress"
+    REVISION    "201207310000Z"
+    DESCRIPTION 
+        "configL2IfaceSelfFilterEnable"
+    REVISION    "201204190000Z"
+    DESCRIPTION 
+        "SFP transciever details."
+    REVISION    "201204100000Z"
+    DESCRIPTION 
+        "clearInterfaceFdbTable, clearInterfaceFdbTableStatus."
+    REVISION    "200911170000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 100 }
+
+
+switch OBJECT IDENTIFIER
+    ::= { prvt-products 5 }
+
+prvtSwitchNotifications OBJECT IDENTIFIER
+    ::= { prvtSwitchMIB 0 }
+
+sys OBJECT IDENTIFIER
+    ::= { prvtSwitchMIB 1 }
+
+sysProductsOids OBJECT IDENTIFIER
+    ::= { sys 1 }
+
+tMetro7224 OBJECT IDENTIFIER
+    ::= { sysProductsOids 10000 }
+
+tVendorDev0001 OBJECT IDENTIFIER
+    ::= { sysProductsOids 10001 }
+
+tMetro7124S OBJECT IDENTIFIER
+    ::= { sysProductsOids 10002 }
+
+tMetro5324T OBJECT IDENTIFIER
+    ::= { sysProductsOids 10003 }
+
+tMarc3208SH OBJECT IDENTIFIER
+    ::= { sysProductsOids 10004 }
+
+tMarc3312SC OBJECT IDENTIFIER
+    ::= { sysProductsOids 10005 }
+
+tMarc3348S OBJECT IDENTIFIER
+    ::= { sysProductsOids 10006 }
+
+tMarc3312WDB OBJECT IDENTIFIER
+    ::= { sysProductsOids 10007 }
+
+tMarc3348WDB OBJECT IDENTIFIER
+    ::= { sysProductsOids 10008 }
+
+tMarc3312WD OBJECT IDENTIFIER
+    ::= { sysProductsOids 10009 }
+
+tMarc3348WD OBJECT IDENTIFIER
+    ::= { sysProductsOids 10010 }
+
+tMarc3312SCH OBJECT IDENTIFIER
+    ::= { sysProductsOids 10011 }
+
+tMarc3348SH OBJECT IDENTIFIER
+    ::= { sysProductsOids 10012 }
+
+tMarc3348S2 OBJECT IDENTIFIER
+    ::= { sysProductsOids 10013 }
+
+tMarc3308 OBJECT IDENTIFIER
+    ::= { sysProductsOids 10014 }
+
+tMarc3306 OBJECT IDENTIFIER
+    ::= { sysProductsOids 10015 }
+
+tVendorDev0002 OBJECT IDENTIFIER
+    ::= { sysProductsOids 11003 }
+
+tVendorDev0003 OBJECT IDENTIFIER
+    ::= { sysProductsOids 11004 }
+
+tVendorDev0004 OBJECT IDENTIFIER
+    ::= { sysProductsOids 11005 }
+
+thub4 OBJECT IDENTIFIER
+    ::= { sysProductsOids 20004 }
+
+tatca401 OBJECT IDENTIFIER
+    ::= { sysProductsOids 20005 }
+
+tatca510 OBJECT IDENTIFIER
+    ::= { sysProductsOids 20006 }
+
+tatca510b OBJECT IDENTIFIER
+    ::= { sysProductsOids 20007 }
+
+tm8000 OBJECT IDENTIFIER
+    ::= { sysProductsOids 40000 }
+
+tm8001 OBJECT IDENTIFIER
+    ::= { sysProductsOids 40001 }
+
+tMetro8064S OBJECT IDENTIFIER
+    ::= { sysProductsOids 40002 }
+
+cMetro100 OBJECT IDENTIFIER
+    ::= { sysProductsOids 40003 }
+
+sysManufacturingTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SysManufacturingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "sysManufacturing details per module"
+    ::= { sys 2 }
+
+sysManufacturingEntry OBJECT-TYPE
+    SYNTAX      SysManufacturingEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in sysManufacturingTable"
+    INDEX       { moduleId }
+    ::= { sysManufacturingTable 1 }
+
+SysManufacturingEntry ::= SEQUENCE {
+    moduleId                    INTEGER,
+    moduleSysSerialNumber       OCTET STRING,
+    moduleSysAssemblyNumber     OCTET STRING,
+    moduleSysHwRevision         OCTET STRING,
+    moduleSysHwSubRevision      OCTET STRING,
+    moduleSysPartNumber         OCTET STRING,
+    moduleSysCLEI               OCTET STRING,
+    moduleSysManufacturingDate  OCTET STRING,
+    moduleSysBaseMacAddress     OCTET STRING,
+    moduleSysFirmwareVersion    OCTET STRING
+}
+
+moduleId OBJECT-TYPE
+    SYNTAX      INTEGER { mainboard(1), slot1(2), slot2(3), slot3(4), 
+                    slot4(5), slot5(6), slot6(7), slot7(8), slot8(9), 
+                    slot9(10) }
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Board id"
+    ::= { sysManufacturingEntry 1 }
+
+moduleSysSerialNumber OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This is the device's serial number, which is entered during the manufacturing process."
+    ::= { sysManufacturingEntry 2 }
+
+moduleSysAssemblyNumber OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the equipment assembly number"
+    ::= { sysManufacturingEntry 3 }
+
+moduleSysHwRevision OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the HW revision"
+    ::= { sysManufacturingEntry 4 }
+
+moduleSysHwSubRevision OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the HW sub-revision"
+    ::= { sysManufacturingEntry 5 }
+
+moduleSysPartNumber OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the equipment part number"
+    ::= { sysManufacturingEntry 6 }
+
+moduleSysCLEI OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the common language equipment identification"
+    ::= { sysManufacturingEntry 7 }
+
+moduleSysManufacturingDate OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the manufacturing date"
+    ::= { sysManufacturingEntry 8 }
+
+moduleSysBaseMacAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Base MAC address of the module"
+    ::= { sysManufacturingEntry 9 }
+
+moduleSysFirmwareVersion OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Firmware version of the module"
+    ::= { sysManufacturingEntry 10 }
+
+sysManufacturing OBJECT IDENTIFIER
+    ::= { sys 3 }
+
+sysSerialNumber OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "This is the device's serial number, which is entered during the manufacturing process."
+    ::= { sysManufacturing 1 }
+
+sysAssemblyNumber OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the equipment assembly number"
+    ::= { sysManufacturing 3 }
+
+sysPartNumber OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the equipment part number"
+    ::= { sysManufacturing 4 }
+
+sysCLEI OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the common language equipment identification"
+    ::= { sysManufacturing 5 }
+
+sysHwRevision OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the HW revision"
+    ::= { sysManufacturing 6 }
+
+sysManufacturingDate OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the manufacturing date"
+    ::= { sysManufacturing 7 }
+
+sysHwSubRevision OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Specifies the HW sub-revision"
+    ::= { sysManufacturing 8 }
+
+sysBaseMacAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Base MAC address of the device"
+    ::= { sysManufacturing 9 }
+
+sysFirmwareVersion OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Firmware version"
+    ::= { sysManufacturing 10 }
+
+config OBJECT IDENTIFIER
+    ::= { prvtSwitchMIB 2 }
+
+configL2 OBJECT IDENTIFIER
+    ::= { config 2 }
+
+configL2IfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ConfigL2IfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of Interfaces and their properties"
+    ::= { configL2 1 }
+
+configL2IfaceEntry OBJECT-TYPE
+    SYNTAX      ConfigL2IfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index of interfaces."
+    INDEX       { configL2IfaceUnit, configL2IfaceSlot, 
+                  configL2IfacePort }
+    ::= { configL2IfaceTable 1 }
+
+ConfigL2IfaceEntry ::= SEQUENCE {
+    configL2IfaceUnit               Integer32,
+    configL2IfaceSlot               Integer32,
+    configL2IfacePort               Integer32,
+    configL2IfaceEnable             TruthValue,
+    configL2IfaceDefaultVID         Integer32,
+    configL2IfaceDuplexModeSet      INTEGER,
+    configL2IfaceSpeedSet           INTEGER,
+    configL2IfaceMtu                Integer32,
+    configL2IfaceFlowEnable         TruthValue,
+    configL2IfaceSelfFilterEnable   TruthValue,
+    configL2IfaceMacAddress         OCTET STRING,
+    configL2IfaceEthertype          INTEGER
+}
+
+configL2IfaceUnit OBJECT-TYPE
+    SYNTAX      Integer32 (1..1000)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index that uniquely identifies a unit in the
+         Interface Table."
+    ::= { configL2IfaceEntry 1 }
+
+configL2IfaceSlot OBJECT-TYPE
+    SYNTAX      Integer32 (1..1000)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index that uniquely identifies a slot within the unit
+         in the Interface Table."
+    ::= { configL2IfaceEntry 2 }
+
+configL2IfacePort OBJECT-TYPE
+    SYNTAX      Integer32 (1..1000)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index that uniquely identifies a port within the slot
+         in the Interface Table."
+    ::= { configL2IfaceEntry 3 }
+
+configL2IfaceEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The desired state of the interface."
+    ::= { configL2IfaceEntry 4 }
+
+configL2IfaceDefaultVID OBJECT-TYPE
+    SYNTAX      Integer32 (1..4094)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "This object sets the default VLAN ID according to 802.1Q."
+    ::= { configL2IfaceEntry 5 }
+
+configL2IfaceDuplexModeSet OBJECT-TYPE
+    SYNTAX      INTEGER { auto(1), full(2), half(3), unknown(4) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The duplex mode for the interface. If the port type does NOT support
+         the default of autonegotiate (1), then the application will
+         initialize the port to a valid value (e.g., full (2))."
+    ::= { configL2IfaceEntry 6 }
+
+configL2IfaceSpeedSet OBJECT-TYPE
+    SYNTAX      INTEGER { auto(0), unknown(1), speed10(10), 
+                    speed100(100), speed1000(1000), speed10000(10000), 
+                    speed40000(40000) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The desired speed and duplex mode for the interface. If the selected
+         control is not available for the interface, a value of illegal (99)
+         is returned. If the port type does NOT support the
+         default of autonegotiate (1), then the application will
+         initialize the port to a valid value (e.g., 1000 (3)).
+         Note that not all controls are available for all interfaces.
+         For example, only 1000 (4) is available for Gigabit
+         Ethernet interfaces."
+    ::= { configL2IfaceEntry 7 }
+
+configL2IfaceMtu OBJECT-TYPE
+    SYNTAX      Integer32 (256..12288)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The Maximum Transmission Unit (in octets) of the interface."
+    ::= { configL2IfaceEntry 8 }
+
+configL2IfaceFlowEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The desired flow mode for the interface.
+         Note that not all controls are available for all interfaces."
+    ::= { configL2IfaceEntry 9 }
+
+configL2IfaceSelfFilterEnable OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Deny packets received on this port to be switched back
+         the same port/trunk. Default is false."
+    ::= { configL2IfaceEntry 10 }
+
+configL2IfaceMacAddress OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Self MAC adress per port."
+    ::= { configL2IfaceEntry 11 }
+
+configL2IfaceEthertype OBJECT-TYPE
+    SYNTAX      INTEGER { vlan(33024), dot1ad(34984), qinq(37120) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The ethertype of the interface."
+    ::= { configL2IfaceEntry 12 }
+
+reportsL2IfaceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF ReportsL2IfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A list of Interfaces and their properties"
+    ::= { configL2 2 }
+
+reportsL2IfaceEntry OBJECT-TYPE
+    SYNTAX      ReportsL2IfaceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An index of interfaces."
+    INDEX       { ifIndex }
+    ::= { reportsL2IfaceTable 1 }
+
+ReportsL2IfaceEntry ::= SEQUENCE {
+    reportsL2IfaceMediaType                     INTEGER,
+    reportsL2IfaceOperDuplex                    INTEGER,
+    reportsL2IfaceOperDual                      INTEGER,
+    reportsL2IfaceOperActive                    INTEGER,
+    reportsL2IfaceMediaTxType                   INTEGER,
+    reportsL2IfaceMediaConType                  INTEGER,
+    reportsL2IfaceMediaLengthSMF                Unsigned32,
+    reportsL2IfaceMediaLength50UM               Unsigned32,
+    reportsL2IfaceMediaLength62UM               Unsigned32,
+    reportsL2IfaceMediaLengthCu                 Unsigned32,
+    reportsL2IfaceMediaLengthOM3                Unsigned32,
+    reportsL2IfaceMediaEncoding                 INTEGER,
+    reportsL2IfaceMediaVendorID                 OCTET STRING,
+    reportsL2IfaceMediaVendorName               OCTET STRING,
+    reportsL2IfaceMediaVendorSN                 OCTET STRING,
+    reportsL2IfaceMediaVendorPN                 OCTET STRING,
+    reportsL2IfaceMediaVendorRev                OCTET STRING,
+    reportsL2IfaceMediaVendorManufacturingDate  OCTET STRING,
+    reportsL2IfaceMediaDiagnDDM                 TruthValue,
+    reportsL2IfaceMediaDiagnIntCal              TruthValue,
+    reportsL2IfaceMediaDiagnExtCal              TruthValue,
+    reportsL2IfaceMediaDiagnAPM                 TruthValue,
+    reportsL2IfaceMediaDiagnACR                 TruthValue,
+    reportsL2IfaceMediaBitrateNom               Unsigned32,
+    reportsL2IfaceMediaBitrateMin               Unsigned32,
+    reportsL2IfaceMediaBitrateMax               Unsigned32,
+    reportsL2IfaceMediaCompatSonet              INTEGER,
+    reportsL2IfaceMediaCompatEth                INTEGER,
+    reportsL2IfaceMediaCompatInfiniband         INTEGER,
+    reportsL2IfaceMediaCompatEscon              INTEGER,
+    reportsL2IfaceMediaCompat10G                INTEGER,
+    reportsL2IfaceMediaCompatFbrChLen           INTEGER,
+    reportsL2IfaceMediaCompatFbrChTech          INTEGER,
+    reportsL2IfaceMediaCompatFbrChMedia         INTEGER,
+    reportsL2IfaceMediaCompatFbrChSpeed         INTEGER
+}
+
+reportsL2IfaceMediaType OBJECT-TYPE
+    SYNTAX      INTEGER { notInstalled(1), unknown(2), 
+                    m1000BaseCXMMSFP(3), m1000BaseCXSMSFP(4), 
+                    m1000BaseTSFPCOPPERMR(5), m1000BaseTSFPCOPPERSR(6), 
+                    m1000BaseTSFPCOPPERSRWOPHY(7), 
+                    m1000BaseTSFCOPPERDISABLED(8), m1000BaseBXSMSFP(9), 
+                    m1000BaseBXMMSFP(10), m1000BasePXSMSFP(11), 
+                    m1000BasePXMMSFP(12), m1000BaseDWDMSMSFP(13), 
+                    m1000BaseDWDMMMSFP(14), m1000BaseSXMMSFP(15), 
+                    m1000BaseSXSMSFP(16), m1000BaseLXSMSFP(17), 
+                    m1000BaseLXMMSFP(18), m1000BaseXDSMSFP(19), 
+                    m1000BaseXDMMSFP(20), m1000BaseZXSMSFP(21), 
+                    m1000BaseZXMMSFP(22), m1000BaseEXSMSFP(23), 
+                    m1000BaseEXMMSFP(24), m1000BaseXWDMSMSFP(25), 
+                    m1000BaseXWDMMMSFP(26), m100BaseBXSMSFP(27), 
+                    m100BaseBXMMSFP(28), m100BasePXSMSFP(29), 
+                    m100BasePXMMSFP(30), m100BaseFXSMSFP(31), 
+                    m100BaseFXMMSFP(32), m100BaseSXSMSFP(33), 
+                    m100BaseSXMMSFP(34), m100BaseLXSMSFP(35), 
+                    m100BaseLXMMSFP(36), m100BaseXDSMSFP(37), 
+                    m100BaseXDMMSFP(38), m100BaseZXSMSFP(39), 
+                    m100BaseZXMMSFP(40), m100BaseEXSMSFP(41), 
+                    m100BaseEXMMSFP(42), m100BaseXWDMSMSFP(43), 
+                    m100BaseXWDMMMSFP(44), m10GBaseSRMMXFP(45), 
+                    m10GBaseLRMMXFP(46), m10GBaseLRMMMXFP(47), 
+                    m10GBaseLRSMXFP(48), m10GBaseSRSMXFP(49), 
+                    m10GBaseLRMSMXFP(50), m10GBaseSXMMXFP(51), 
+                    m10GBaseSXSMXFP(52), m10GBaseLXMMXFP(53), 
+                    m10GBaseLXSMXFP(54), m10GBaseXDSMXFP(55), 
+                    m10GBaseXDMMXFP(56), m10GBaseZXSMXFP(57), 
+                    m10GBaseZXMMXFP(58), m10GBaseEXSMXFP(59), 
+                    m10GBaseEXMMXFP(60), m10GBaseXWDMSMXFP(61), 
+                    m10GBaseXWDMMMXFP(62), m10GBaseSXSMSFPPLUS(63), 
+                    m10GBaseSXMMSFPPLUS(64), m40GBaseQSFPSPI(65), 
+                    rj45(66), m10GBaseZXSMSFPPLUS(67), 
+                    m10GBaseZXMMSFPPLUS(68), m10GBaseXDSMSFPPLUS(69), 
+                    m10GBaseXDMMSFPPLUS(70), m10GBaseLXSMSFPPLUS(71), 
+                    m10GBaseLXMMSFPPLUS(72), m10GBaseDWDMSMSFPPLUS(73), 
+                    m10GBaseDWDMMMSFPPLUS(74), m10GBASECXSMSFPPLUS(75), 
+                    m10GBASECXMMSFPPLUS(76) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Installed media type"
+    ::= { reportsL2IfaceEntry 1 }
+
+reportsL2IfaceOperDuplex OBJECT-TYPE
+    SYNTAX      INTEGER { auto(1), full(2), half(3), unknown(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Operational duplex on the interface"
+    ::= { reportsL2IfaceEntry 3 }
+
+reportsL2IfaceOperDual OBJECT-TYPE
+    SYNTAX      INTEGER { dualPort(1), singlePort(2) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Indicate whether interface is a dual combo port"
+    ::= { reportsL2IfaceEntry 4 }
+
+reportsL2IfaceOperActive OBJECT-TYPE
+    SYNTAX      INTEGER { copperActive(1), fiberActive(2), 
+                    notRelevent(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Information for the active copper/fiber port in case of dual port"
+    ::= { reportsL2IfaceEntry 5 }
+
+reportsL2IfaceMediaTxType OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), gbic(2), soldered(3), sfp(4), 
+                    xbi(5), xenpak(6), xfp(7), xff(8), xfpE(9), xpak(10), 
+                    x2(11), dwdmSFP(12), qsfp(13) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media tranceiver type"
+    ::= { reportsL2IfaceEntry 6 }
+
+reportsL2IfaceMediaConType OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), sc(2), fcS1Copper(3), 
+                    fcS2Copper(4), bncTNC(5), fcCoaxial(6), fiberJack(7), 
+                    lc(8), mtRJ(9), mu(10), sg(11), opticalPigtail(12), 
+                    mpoParalelOptic(13), hssdcII(14), copperPigtail(15), 
+                    rj45(16) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media connector type"
+    ::= { reportsL2IfaceEntry 7 }
+
+reportsL2IfaceMediaLengthSMF OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media length of the single mode fiber"
+    ::= { reportsL2IfaceEntry 8 }
+
+reportsL2IfaceMediaLength50UM OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media length of 50um fiber"
+    ::= { reportsL2IfaceEntry 9 }
+
+reportsL2IfaceMediaLength62UM OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media length of 62.5um fiber"
+    ::= { reportsL2IfaceEntry 10 }
+
+reportsL2IfaceMediaLengthCu OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media length of copper"
+    ::= { reportsL2IfaceEntry 11 }
+
+reportsL2IfaceMediaLengthOM3 OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media length of 50um OM3 fiber"
+    ::= { reportsL2IfaceEntry 12 }
+
+reportsL2IfaceMediaEncoding OBJECT-TYPE
+    SYNTAX      INTEGER { eUnknown(1), e8b10b(2), e4b5b(3), eNRZ(4), 
+                    eManchester(5), eSONETScrambled(6), e64b66b(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media encoding"
+    ::= { reportsL2IfaceEntry 13 }
+
+reportsL2IfaceMediaVendorID OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media vendor IEEE company ID"
+    ::= { reportsL2IfaceEntry 14 }
+
+reportsL2IfaceMediaVendorName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media vendor name (ASCII)"
+    ::= { reportsL2IfaceEntry 15 }
+
+reportsL2IfaceMediaVendorSN OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media serial number provided by the vendor (ASCII)"
+    ::= { reportsL2IfaceEntry 16 }
+
+reportsL2IfaceMediaVendorPN OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media part number provided by the vendor (ASCII)"
+    ::= { reportsL2IfaceEntry 17 }
+
+reportsL2IfaceMediaVendorRev OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media revision level for part number provided by vendor (ASCII)"
+    ::= { reportsL2IfaceEntry 18 }
+
+reportsL2IfaceMediaVendorManufacturingDate OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media manufacturing date provided by the vendor (ASCII)"
+    ::= { reportsL2IfaceEntry 19 }
+
+reportsL2IfaceMediaDiagnDDM OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media Digital Diagnostic Monitoring"
+    ::= { reportsL2IfaceEntry 20 }
+
+reportsL2IfaceMediaDiagnIntCal OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media diagnostic internal calibration"
+    ::= { reportsL2IfaceEntry 21 }
+
+reportsL2IfaceMediaDiagnExtCal OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media diagnostic external calibration"
+    ::= { reportsL2IfaceEntry 22 }
+
+reportsL2IfaceMediaDiagnAPM OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media diagnostic avgerage power measurement"
+    ::= { reportsL2IfaceEntry 23 }
+
+reportsL2IfaceMediaDiagnACR OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media diagnostic address change"
+    ::= { reportsL2IfaceEntry 24 }
+
+reportsL2IfaceMediaBitrateNom OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media nominal bitrate"
+    ::= { reportsL2IfaceEntry 25 }
+
+reportsL2IfaceMediaBitrateMin OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media minimum bitrate in percent below the nominal"
+    ::= { reportsL2IfaceEntry 26 }
+
+reportsL2IfaceMediaBitrateMax OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media maximum bitrate in percent above the nominal"
+    ::= { reportsL2IfaceEntry 27 }
+
+reportsL2IfaceMediaCompatSonet OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), rsb1(2), rsb2(3), srOC192(4), 
+                    lrOC48(5), irOC48(6), srOC48(7), lrSMOC12(8), 
+                    irSMOC12(9), srOC12(10), lrSMOC3(11), irSMOC3(12), 
+                    srOC3(13) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media Sonet compatibility"
+    ::= { reportsL2IfaceEntry 28 }
+
+reportsL2IfaceMediaCompatEth OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), basePX(2), baseBX10(3), 
+                    m100BaseFX(4), m100BaseLXLX10(5), m1000BaseT(6), 
+                    m1000BaseCX(7), m1000BaseLX(8), m1000BaseSX(9) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media Ethernet compatibility"
+    ::= { reportsL2IfaceEntry 29 }
+
+reportsL2IfaceMediaCompatInfiniband OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), c1XSX(2), c1XLX(3), 
+                    c1XCopperActive(4), c1XCopperPassive(5) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media InfiniBand compatibility"
+    ::= { reportsL2IfaceEntry 30 }
+
+reportsL2IfaceMediaCompatEscon OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), smf(2), mmf(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media ESCON compatibility"
+    ::= { reportsL2IfaceEntry 31 }
+
+reportsL2IfaceMediaCompat10G OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), baseLRM(2), baseLR(3), baseSR(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media 10G Ethernet compatibility"
+    ::= { reportsL2IfaceEntry 32 }
+
+reportsL2IfaceMediaCompatFbrChLen OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), veryLong(2), long(3), medium(4), 
+                    intermediate(5), short(6) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media Fibre Channel link length"
+    ::= { reportsL2IfaceEntry 33 }
+
+reportsL2IfaceMediaCompatFbrChTech OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), sa(2), lc(3), elInter(4), 
+                    elIntra(5), sn(6), sl(7), ll(8), copperActive(9), 
+                    copperPassive(10), copperFCBaseT(11) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media Fibre Channel transmitter technology"
+    ::= { reportsL2IfaceEntry 34 }
+
+reportsL2IfaceMediaCompatFbrChMedia OBJECT-TYPE
+    SYNTAX      INTEGER { unknown(1), twistedAxialPair(2), 
+                    twistedPair(3), miniatureCoax(4), videoCoax(5), 
+                    multiMode62point5um(6), multiMode50um(7), 
+                    singleMode(8) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media Fibre Channel transmission media"
+    ::= { reportsL2IfaceEntry 35 }
+
+reportsL2IfaceMediaCompatFbrChSpeed OBJECT-TYPE
+    SYNTAX      INTEGER { fbrUnknwon(1), fbr100(2), fbr200(3), fbr400(4), 
+                    fbr800(5), fbr1200(6), fbr1600(7) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Media Fibre Channel speed, in MBps"
+    ::= { reportsL2IfaceEntry 36 }
+
+clearInterfaceFdbTable OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Clear fdb table for interface given as argument.
+         Both notations - SNMP and CLI are accepted - for example
+         can be set either to 1/1/1 or 1101.
+         If port notation can't be recognized ( not ifIndex or CLI notation ),
+         then whole fdb table is cleared.
+         Get requests over this object will return noSuchInstance."
+    ::= { configL2 3 }
+
+clearInterfaceFdbTableStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Return code from last operation over clearInterfaceFdbTable."
+    ::= { configL2 4 }
+
+ipSwitch OBJECT IDENTIFIER
+    ::= { prvt-products 6 }
+
+mpls OBJECT IDENTIFIER
+    ::= { ipSwitch 3 }
+
+routingProtocols OBJECT IDENTIFIER
+    ::= { ipSwitch 4 }
+
+serviceAccessSwitch OBJECT IDENTIFIER
+    ::= { prvt-products 7 }
+
+software OBJECT IDENTIFIER
+    ::= { prvt-products 111 }
+
+portSecurityViolation NOTIFICATION-TYPE
+    OBJECTS     { ifIndex }
+    STATUS      current
+    DESCRIPTION 
+        "The port security violation notification
+         indicates that a port security violation
+         has been detected, e.g more MAC adresses
+         have been learned on that port than the
+         number allowed."
+    ::= { prvtSwitchNotifications 1 }
+
+sfpPlugged NOTIFICATION-TYPE
+    OBJECTS     { ifIndex }
+    STATUS      current
+    DESCRIPTION 
+        "sfp plugged"
+    ::= { prvtSwitchNotifications 2 }
+
+sfpUnPlugged NOTIFICATION-TYPE
+    OBJECTS     { ifIndex }
+    STATUS      current
+    DESCRIPTION 
+        "sfp unplugged"
+    ::= { prvtSwitchNotifications 3 }
+
+hardwareLicenseNotInstalled NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "Hardware license not installed. 
+         Some ports will not function normally."
+    ::= { prvtSwitchNotifications 4 }
+
+mplsMgmtTaskCrashed NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "mpls_mgmt task crashed."
+    ::= { prvtSwitchNotifications 5 }
+
+mplsLdbHwTaskCrashed NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "mpls_ldb_hw task crashed."
+    ::= { prvtSwitchNotifications 6 }
+
+mplsLdbFrwdTaskCrashed NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "mpls_ldb_frwd task crashed."
+    ::= { prvtSwitchNotifications 7 }
+
+mplsStackTaskCrashed NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "mpls_stack task crashed."
+    ::= { prvtSwitchNotifications 8 }
+
+prvtDuplicatedMACAddressAlarm NOTIFICATION-TYPE
+    OBJECTS     { dot1qTpFdbStatus }
+    STATUS      current
+    DESCRIPTION 
+        "This notification is sent by the agent when a duplicated MAC is recived."
+    ::= { prvtSwitchNotifications 9 }
+
+unauthenticatedAccessViaCLI NOTIFICATION-TYPE
+    STATUS      current
+    DESCRIPTION 
+        "The unauthenticatedAccessViaCLI notification indicates that 
+         the last attempt to login to the device via CLI cannot 
+         be authenticated."
+    ::= { prvtSwitchNotifications 10 }
+
+END -- end of module PRVT-SWITCH-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SYNC-ETHERNET-MIB b/MIBS/telco-systems/binox/PRVT-SYNC-ETHERNET-MIB
new file mode 100644
index 0000000..5055a6d
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SYNC-ETHERNET-MIB
@@ -0,0 +1,624 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SYNC-ETHERNET-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SYNC-ETHERNET-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    switch
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    DateAndTime, RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtSyncEthernetMIB MODULE-IDENTITY
+    LAST-UPDATED "201011100000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This is the MIB module to manage
+         synchronization over ethernet."
+    REVISION    "201011100000Z"
+    DESCRIPTION 
+        "Initial"
+    ::= { switch 170 }
+
+
+PrvtSyncEthernetQualityLevelType ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Clock Quality Levels."
+    SYNTAX      INTEGER { prc(2), ssuA(4), ssuB(8), sec(11), dnu(15), 
+                    stu(16), prs(17), tnc(20), st2(23), st3(26), smc(28), 
+                    st3e(29), prov(30), dus(31), invalid(64), failed(65) }
+
+prvtSyncEthernetMIBNotifications OBJECT IDENTIFIER
+    ::= { prvtSyncEthernetMIB 0 }
+
+prvtSyncEthernetMIBObjects OBJECT IDENTIFIER
+    ::= { prvtSyncEthernetMIB 1 }
+
+syncEthernetHoldOffTime OBJECT-TYPE
+    SYNTAX      Integer32 (300..1800)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Timeout value, in millisseconds, for the hold-off timer."
+    ::= { prvtSyncEthernetMIBObjects 1 }
+
+syncEthernetWaitToRestoreTime OBJECT-TYPE
+    SYNTAX      Integer32 (0..12)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Timeout value, in minutes, for the wait-to-restore timer."
+    ::= { prvtSyncEthernetMIBObjects 2 }
+
+syncEthernetG781OptionMode OBJECT-TYPE
+    SYNTAX      INTEGER { option1(1), option2(2) }
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Specify which G.781 option mode to operate in."
+    ::= { prvtSyncEthernetMIBObjects 3 }
+
+syncEthernetClockSourceTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SyncEthernetClockSourceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Source clock synchronization table."
+    ::= { prvtSyncEthernetMIBObjects 10 }
+
+syncEthernetClockSourceEntry OBJECT-TYPE
+    SYNTAX      SyncEthernetClockSourceEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Source clock synchronization entry."
+    INDEX       { ifIndex }
+    ::= { syncEthernetClockSourceTable 1 }
+
+SyncEthernetClockSourceEntry ::= SEQUENCE {
+    syncEthernetClockSourceRowStatus                    RowStatus,
+    syncEthernetClockSourceAdminStatus                  INTEGER,
+    syncEthernetClockSourceEsmc                         TruthValue,
+    syncEthernetClockSourceFrequency                    Unsigned32,
+    syncEthernetClockSourceQuality                      PrvtSyncEthernetQualityLevelType,
+    syncEthernetClockSourceQualityChangeNotify          TruthValue,
+    syncEthernetClockSourceRecvQualityLevel             PrvtSyncEthernetQualityLevelType,
+    syncEthernetClockSourceLastRecvEsmcPduTime          DateAndTime,
+    syncEthernetClockSourceLastRecvEsmcErrorPduTime     DateAndTime,
+    syncEthernetClockSourceLastRecvEsmcPduType          Unsigned32,
+    syncEthernetClockSourceLastRecvLastError            Unsigned32,
+    syncEthernetClockSourceNumRecvEsmcPdu               Unsigned32,
+    syncEthernetClockSourceNumDiscEsmcPdu               Unsigned32,
+    syncEthernetClockSourceNumSignalFail                Unsigned32,
+    syncEthernetClockSourceQualityInvalidNotify         TruthValue,
+    syncEthernetClockSourceEsmcInvalidNotify            TruthValue
+}
+
+syncEthernetClockSourceRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Clock source synchronization table rowstatus."
+    ::= { syncEthernetClockSourceEntry 2 }
+
+syncEthernetClockSourceAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable clock source."
+    ::= { syncEthernetClockSourceEntry 3 }
+
+syncEthernetClockSourceEsmc OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable receiving ESMC messages (Synchronization Status Messages).
+         Only applicable for BITS clock sources."
+    ::= { syncEthernetClockSourceEntry 4 }
+
+syncEthernetClockSourceFrequency OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..2431)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify input frequency - N*8kHz
+         Only applicable for BITS clock sources."
+    ::= { syncEthernetClockSourceEntry 5 }
+
+syncEthernetClockSourceQuality OBJECT-TYPE
+    SYNTAX      PrvtSyncEthernetQualityLevelType
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify quality level
+         In G781-option I mode, valid values are prs, ssuA, ssuB, dnu.
+         In G781-option II mode, valid values are stu, prs, tnc, st2, st3, smc, st3e, dus, prov."
+    ::= { syncEthernetClockSourceEntry 6 }
+
+syncEthernetClockSourceQualityChangeNotify OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable quality level change notifications"
+    ::= { syncEthernetClockSourceEntry 7 }
+
+syncEthernetClockSourceRecvQualityLevel OBJECT-TYPE
+    SYNTAX      PrvtSyncEthernetQualityLevelType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The received quality level value."
+    ::= { syncEthernetClockSourceEntry 8 }
+
+syncEthernetClockSourceLastRecvEsmcPduTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Time elapsed since the last valid ESMC message received"
+    ::= { syncEthernetClockSourceEntry 9 }
+
+syncEthernetClockSourceLastRecvEsmcErrorPduTime OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Time elapsed since the last invalid ESMC message received"
+    ::= { syncEthernetClockSourceEntry 10 }
+
+syncEthernetClockSourceLastRecvEsmcPduType OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last received ESMC message type"
+    ::= { syncEthernetClockSourceEntry 11 }
+
+syncEthernetClockSourceLastRecvLastError OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..255)
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last error code"
+    ::= { syncEthernetClockSourceEntry 12 }
+
+syncEthernetClockSourceNumRecvEsmcPdu OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of received ESMC messages"
+    ::= { syncEthernetClockSourceEntry 13 }
+
+syncEthernetClockSourceNumDiscEsmcPdu OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of discarded ESMC messages"
+    ::= { syncEthernetClockSourceEntry 14 }
+
+syncEthernetClockSourceNumSignalFail OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of generated signal failure events"
+    ::= { syncEthernetClockSourceEntry 15 }
+
+syncEthernetClockSourceQualityInvalidNotify OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable invalid quality notifications"
+    ::= { syncEthernetClockSourceEntry 16 }
+
+syncEthernetClockSourceEsmcInvalidNotify OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable invalid ESMC notifications"
+    ::= { syncEthernetClockSourceEntry 17 }
+
+syncEthernetClockOutputTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SyncEthernetClockOutputEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Output clock synchronization table."
+    ::= { prvtSyncEthernetMIBObjects 12 }
+
+syncEthernetClockOutputEntry OBJECT-TYPE
+    SYNTAX      SyncEthernetClockOutputEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Output clock synchronization entry."
+    INDEX       { ifIndex }
+    ::= { syncEthernetClockOutputTable 1 }
+
+SyncEthernetClockOutputEntry ::= SEQUENCE {
+    syncEthernetClockOutputRowStatus                    RowStatus,
+    syncEthernetClockOutputEsmc                         TruthValue,
+    syncEthernetClockOutputFrequency                    Unsigned32,
+    syncEthernetClockOutputDpll                         Integer32,
+    syncEthernetClockOutputQualityLevel                 PrvtSyncEthernetQualityLevelType,
+    syncEthernetClockOutputLastQualityLevelChange       DateAndTime,
+    syncEthernetClockOutputMsgEvent                     TruthValue,
+    syncEthernetClockOutputNumTransmittedEsmcPdu        Unsigned32,
+    syncEthernetClockOutputNumTransmittedEventEsmcPdu   Unsigned32
+}
+
+syncEthernetClockOutputRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "syncEthernetClockOutput table rowStatus"
+    ::= { syncEthernetClockOutputEntry 2 }
+
+syncEthernetClockOutputEsmc OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable sending ESMC messages
+         Only applicable for BITS clock outputs."
+    ::= { syncEthernetClockOutputEntry 3 }
+
+syncEthernetClockOutputFrequency OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..2431)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify output frequency - N*8kHz
+         Only applicable for BITS clock outputs."
+    ::= { syncEthernetClockOutputEntry 4 }
+
+syncEthernetClockOutputDpll OBJECT-TYPE
+    SYNTAX      Integer32 (0..1)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Assign output clock to DPLL
+         Only applicable for BITS clock outputs.
+         Must be set to the syncEthernetDpllModuleId value of an existing
+         row in syncEthernetDpllTable."
+    ::= { syncEthernetClockOutputEntry 5 }
+
+syncEthernetClockOutputQualityLevel OBJECT-TYPE
+    SYNTAX      PrvtSyncEthernetQualityLevelType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last quality level value sent"
+    ::= { syncEthernetClockOutputEntry 6 }
+
+syncEthernetClockOutputLastQualityLevelChange OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Time elapsed since the last quality level change"
+    ::= { syncEthernetClockOutputEntry 7 }
+
+syncEthernetClockOutputMsgEvent OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Last ESMC message type sent"
+    ::= { syncEthernetClockOutputEntry 8 }
+
+syncEthernetClockOutputNumTransmittedEsmcPdu OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of ESMC messages sent"
+    ::= { syncEthernetClockOutputEntry 9 }
+
+syncEthernetClockOutputNumTransmittedEventEsmcPdu OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Total number of ESMC messages sent"
+    ::= { syncEthernetClockOutputEntry 10 }
+
+syncEthernetDpllTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SyncEthernetDpllEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Synchronization DPLL table"
+    ::= { prvtSyncEthernetMIBObjects 14 }
+
+syncEthernetDpllEntry OBJECT-TYPE
+    SYNTAX      SyncEthernetDpllEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Synchronization DPLL entry"
+    INDEX       { syncEthernetDpllModuleId }
+    ::= { syncEthernetDpllTable 1 }
+
+SyncEthernetDpllEntry ::= SEQUENCE {
+    syncEthernetDpllModuleId                        Integer32,
+    syncEthernetDpllRowStatus                       RowStatus,
+    syncEthernetDpllAdminStatus                     INTEGER,
+    syncEthernetDpllReferenceSelection              INTEGER,
+    syncEthernetDpllEnableQualityLevel              TruthValue,
+    syncEthernetDpllStatusChangeNotify              TruthValue,
+    syncEthernetDpllReferenceChangeNotify           TruthValue,
+    syncEthernetDpllStatus                          INTEGER,
+    syncEthernetDpllStatusLastChange                DateAndTime,
+    syncEthernetDpllSystemQualityLevel              PrvtSyncEthernetQualityLevelType,
+    syncEthernetDpllSystemQualityLevelLastChange    DateAndTime,
+    syncEthernetDpllSelectedReferenceClock          OCTET STRING,
+    syncEthernetDpllSelectedReferenceClockChange    DateAndTime
+}
+
+syncEthernetDpllModuleId OBJECT-TYPE
+    SYNTAX      Integer32 (0..1)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Synchronization DPLL module index"
+    ::= { syncEthernetDpllEntry 1 }
+
+syncEthernetDpllRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Synchronization DPLL rowstatus"
+    ::= { syncEthernetDpllEntry 2 }
+
+syncEthernetDpllAdminStatus OBJECT-TYPE
+    SYNTAX      INTEGER { up(1), down(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Administrative status of the DPLL"
+    ::= { syncEthernetDpllEntry 3 }
+
+syncEthernetDpllReferenceSelection OBJECT-TYPE
+    SYNTAX      INTEGER { freerun(1), static(2), g781(3) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify reference selection mode"
+    ::= { syncEthernetDpllEntry 4 }
+
+syncEthernetDpllEnableQualityLevel OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable reference selection based on quality level
+         Only applicable when syncEthernetDpllReferenceSelection equals g781."
+    ::= { syncEthernetDpllEntry 5 }
+
+syncEthernetDpllStatusChangeNotify OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable DPLL status change notifications"
+    ::= { syncEthernetDpllEntry 6 }
+
+syncEthernetDpllReferenceChangeNotify OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Enable reference clock change notifications"
+    ::= { syncEthernetDpllEntry 7 }
+
+syncEthernetDpllStatus OBJECT-TYPE
+    SYNTAX      INTEGER { freerun(0), locked(1), holdover(2), 
+                    refFailure(3) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "DPLL operational status"
+    ::= { syncEthernetDpllEntry 8 }
+
+syncEthernetDpllStatusLastChange OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Time since last DPLL status change"
+    ::= { syncEthernetDpllEntry 9 }
+
+syncEthernetDpllSystemQualityLevel OBJECT-TYPE
+    SYNTAX      PrvtSyncEthernetQualityLevelType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "System quality level"
+    ::= { syncEthernetDpllEntry 10 }
+
+syncEthernetDpllSystemQualityLevelLastChange OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Time since last system quality level change"
+    ::= { syncEthernetDpllEntry 11 }
+
+syncEthernetDpllSelectedReferenceClock OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The selected reference clock source"
+    ::= { syncEthernetDpllEntry 12 }
+
+syncEthernetDpllSelectedReferenceClockChange OBJECT-TYPE
+    SYNTAX      DateAndTime
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Time since last reference clock change"
+    ::= { syncEthernetDpllEntry 13 }
+
+syncEthernetDpllClkRefTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF SyncEthernetDpllClkRefEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Synchronization DPLL clock reference table"
+    ::= { prvtSyncEthernetMIBObjects 16 }
+
+syncEthernetDpllClkRefEntry OBJECT-TYPE
+    SYNTAX      SyncEthernetDpllClkRefEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Synchronization DPLL clock reference entry"
+    INDEX       { syncEthernetDpllModuleId, ifIndex }
+    ::= { syncEthernetDpllClkRefTable 1 }
+
+SyncEthernetDpllClkRefEntry ::= SEQUENCE {
+    syncEthernetDpllClkRefRowStatus     RowStatus,
+    syncEthernetDpllClkRefPriority      Unsigned32,
+    syncEthernetDpllClkRefLockOut       TruthValue,
+    syncEthernetDpllClkRefFailStatus    Integer32
+}
+
+syncEthernetDpllClkRefRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Synchronization DPLL clock reference rowstatus"
+    ::= { syncEthernetDpllClkRefEntry 2 }
+
+syncEthernetDpllClkRefPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..256)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Specify reference clock priority"
+    ::= { syncEthernetDpllClkRefEntry 3 }
+
+syncEthernetDpllClkRefLockOut OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Lock reference clock"
+    ::= { syncEthernetDpllClkRefEntry 4 }
+
+syncEthernetDpllClkRefFailStatus OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "DPLL reference clock status"
+    ::= { syncEthernetDpllClkRefEntry 5 }
+
+syncEthernetInvalidESMC NOTIFICATION-TYPE
+    OBJECTS     { syncEthernetClockSourceLastRecvLastError }
+    STATUS      current
+    DESCRIPTION 
+        "Invalid ESMC has been received."
+    ::= { prvtSyncEthernetMIBNotifications 1 }
+
+syncEthernetQualityLevelChange NOTIFICATION-TYPE
+    OBJECTS     { syncEthernetClockSourceQuality }
+    STATUS      current
+    DESCRIPTION 
+        "Current value of syncEthernetClockSourceQuality has
+         been changed."
+    ::= { prvtSyncEthernetMIBNotifications 2 }
+
+syncEthernetInvalidQualityLevelReceived NOTIFICATION-TYPE
+    OBJECTS     { syncEthernetClockSourceRecvQualityLevel }
+    STATUS      current
+    DESCRIPTION 
+        "Invalid Quality level equals to QL-INVx has been received."
+    ::= { prvtSyncEthernetMIBNotifications 3 }
+
+syncEthernetDPLLReferenceChange NOTIFICATION-TYPE
+    OBJECTS     { syncEthernetDpllSelectedReferenceClockChange }
+    STATUS      current
+    DESCRIPTION 
+        "DPLL's reference clock changed."
+    ::= { prvtSyncEthernetMIBNotifications 4 }
+
+syncEthernetDPLLChanged NOTIFICATION-TYPE
+    OBJECTS     { syncEthernetDpllStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Some of the DPLL's operational status changes."
+    ::= { prvtSyncEthernetMIBNotifications 5 }
+
+syncEthernetDPLLLockFailed NOTIFICATION-TYPE
+    OBJECTS     { syncEthernetDpllClkRefFailStatus }
+    STATUS      current
+    DESCRIPTION 
+        "If after new Reference selection the DPLL can't
+         lock onto it, this will affect the Clock Source
+         associated with that reference"
+    ::= { prvtSyncEthernetMIBNotifications 6 }
+
+END -- end of module PRVT-SYNC-ETHERNET-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-SYS-MON-MIB b/MIBS/telco-systems/binox/PRVT-SYS-MON-MIB
new file mode 100644
index 0000000..f88e510
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-SYS-MON-MIB
@@ -0,0 +1,718 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-SYS-MON-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-SYS-MON-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    software
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, NOTIFICATION-TYPE, OBJECT-TYPE, 
+    Unsigned32
+        FROM SNMPv2-SMI
+    TruthValue
+        FROM SNMPv2-TC;
+
+prvtSysMonMIB MODULE-IDENTITY
+    LAST-UPDATED "201312120000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Information for system resources"
+    REVISION    "201312120000Z"
+    DESCRIPTION 
+        "add prvtSysMonDoorOpen table prvtSysMonDoorOpenTest notification."
+    REVISION    "200909040000Z"
+    DESCRIPTION 
+        "Sync to internal implementation."
+    ::= { software 3 }
+
+
+prvtSysMonNotifications OBJECT IDENTIFIER
+    ::= { prvtSysMonMIB 0 }
+
+prvtSysMonObjects OBJECT IDENTIFIER
+    ::= { prvtSysMonMIB 1 }
+
+prvtSysMonCurrentCpuUsage OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Current CPU Utilization"
+    ::= { prvtSysMonObjects 1 }
+
+prvtSysMonCurrentCpuTemperature OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Current CPU Temperature"
+    ::= { prvtSysMonObjects 2 }
+
+prvtSysMonCurrentRamUsage OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Current RAM Utilization"
+    ::= { prvtSysMonObjects 3 }
+
+prvtSysMonSelfTestExecuteNow OBJECT-TYPE
+    SYNTAX      Integer32 (0..1)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "When this object is set to '1', command
+         self-test execute-now.  Setting the variable to '0'
+         results in an 'inconsistentValue' error.
+         Setting it to any other value has no effect.
+         
+         When this object is read, the value '0' is returned."
+    ::= { prvtSysMonObjects 4 }
+
+prvtSysMonCpuUsage OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 5 }
+
+prvtSysMonCpuUsageShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonCpuUsage 1 }
+
+prvtSysMonCpuUsageLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonCpuUsage 2 }
+
+prvtSysMonCpuUsageLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonCpuUsage 3 }
+
+prvtSysMonCpuUsageTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonCpuUsage 4 }
+
+prvtSysMonCpuUsagePeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonCpuUsage 5 }
+
+prvtSysMonCpuUsageLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (0..100)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Low threshold"
+    ::= { prvtSysMonCpuUsage 6 }
+
+prvtSysMonCpuUsageHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (0..100)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "High threshold"
+    ::= { prvtSysMonCpuUsage 7 }
+
+prvtSysMonCpuUsageLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonCpuUsage 8 }
+
+prvtSysMonCPUTemperature OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 6 }
+
+prvtSysMonCpuTemperatureShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonCPUTemperature 1 }
+
+prvtSysMonCpuTemperatureLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonCPUTemperature 2 }
+
+prvtSysMonCpuTemperatureLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonCPUTemperature 3 }
+
+prvtSysMonCpuTemperatureTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonCPUTemperature 4 }
+
+prvtSysMonCpuTemperaturePeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonCPUTemperature 5 }
+
+prvtSysMonCpuTemperatureLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..100)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Low threshold"
+    ::= { prvtSysMonCPUTemperature 6 }
+
+prvtSysMonCpuTemperatureHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (-40..100)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "High threshold"
+    ::= { prvtSysMonCPUTemperature 7 }
+
+prvtSysMonCpuTemperatureLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonCPUTemperature 8 }
+
+prvtSysMonRAMUsage OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 7 }
+
+prvtSysMonRamUsageShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonRAMUsage 1 }
+
+prvtSysMonRamUsageLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonRAMUsage 2 }
+
+prvtSysMonRamUsageLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonRAMUsage 3 }
+
+prvtSysMonRamUsageTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonRAMUsage 4 }
+
+prvtSysMonRamUsagePeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonRAMUsage 5 }
+
+prvtSysMonRamUsageLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (0..100)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Low threshold"
+    ::= { prvtSysMonRAMUsage 6 }
+
+prvtSysMonRamUsageHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (0..100)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "High threshold"
+    ::= { prvtSysMonRAMUsage 7 }
+
+prvtSysMonRamUsageLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonRAMUsage 8 }
+
+prvtSysMonPortStatistics OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 8 }
+
+prvtSysMonPortStatisticsShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonPortStatistics 1 }
+
+prvtSysMonPortStatisticsLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonPortStatistics 2 }
+
+prvtSysMonPortStatisticsLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonPortStatistics 3 }
+
+prvtSysMonPortStatisticsTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonPortStatistics 4 }
+
+prvtSysMonPortStatisticsPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonPortStatistics 5 }
+
+prvtSysMonPortStatisticsLowThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (0..100)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Low threshold"
+    ::= { prvtSysMonPortStatistics 6 }
+
+prvtSysMonPortStatisticsHighThreshold OBJECT-TYPE
+    SYNTAX      Integer32 (0..100)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "High threshold"
+    ::= { prvtSysMonPortStatistics 7 }
+
+prvtSysMonPortStatisticsLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonPortStatistics 8 }
+
+prvtSysMonPortStatisticsLastFailedPorts OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonPortStatistics 9 }
+
+prvtSysMonFan OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 9 }
+
+prvtSysMonFanShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonFan 1 }
+
+prvtSysMonFanLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonFan 2 }
+
+prvtSysMonFanLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonFan 3 }
+
+prvtSysMonFanTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonFan 4 }
+
+prvtSysMonFanPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonFan 5 }
+
+prvtSysMonFanLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonFan 6 }
+
+prvtSysMonOnboardPower OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 10 }
+
+prvtSysMonOnboardPowerShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonOnboardPower 1 }
+
+prvtSysMonOnboardPowerLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonOnboardPower 2 }
+
+prvtSysMonOnboardPowerLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonOnboardPower 3 }
+
+prvtSysMonOnboardPowerTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonOnboardPower 4 }
+
+prvtSysMonOnboardPowerPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonOnboardPower 5 }
+
+prvtSysMonOnboardPowerLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonOnboardPower 6 }
+
+prvtSysMonPowerSupply OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 11 }
+
+prvtSysMonPowerSupplyShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonPowerSupply 1 }
+
+prvtSysMonPowerSupplyLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonPowerSupply 2 }
+
+prvtSysMonPowerSupplyLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonPowerSupply 3 }
+
+prvtSysMonPowerSupplyTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonPowerSupply 4 }
+
+prvtSysMonPowerSupplyPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonPowerSupply 5 }
+
+prvtSysMonPowerSupplyLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonPowerSupply 6 }
+
+prvtSysMonPowerSupplyFan OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 12 }
+
+prvtSysMonPowerSupplyFanShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonPowerSupplyFan 1 }
+
+prvtSysMonPowerSupplyFanLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonPowerSupplyFan 2 }
+
+prvtSysMonPowerSupplyFanLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonPowerSupplyFan 3 }
+
+prvtSysMonPowerSupplyFanTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonPowerSupplyFan 4 }
+
+prvtSysMonPowerSupplyFanPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonPowerSupplyFan 5 }
+
+prvtSysMonPowerSupplyFanLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonPowerSupplyFan 6 }
+
+prvtSysMonDoorOpen OBJECT IDENTIFIER
+    ::= { prvtSysMonObjects 13 }
+
+prvtSysMonDoorOpenShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Shutdown cpu usage test"
+    ::= { prvtSysMonDoorOpen 1 }
+
+prvtSysMonDoorOpenLog OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send log if test failed"
+    ::= { prvtSysMonDoorOpen 2 }
+
+prvtSysMonDoorOpenLed OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Enable led if test failed"
+    ::= { prvtSysMonDoorOpen 3 }
+
+prvtSysMonDoorOpenTrap OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Send trap if test failed"
+    ::= { prvtSysMonDoorOpen 4 }
+
+prvtSysMonDoorOpenPeriod OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..65535)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Test period in seconds"
+    ::= { prvtSysMonDoorOpen 5 }
+
+prvtSysMonDoorOpenLastStatus OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "Status"
+    ::= { prvtSysMonDoorOpen 6 }
+
+prvtSysMonCpuUtilization NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonCurrentCpuUsage, 
+                  prvtSysMonCpuUsageLowThreshold, 
+                  prvtSysMonCpuUsageHighThreshold }
+    STATUS      current
+    DESCRIPTION 
+        "CPU utilization test has passed the
+         program threshold."
+    ::= { prvtSysMonNotifications 1 }
+
+prvtSysMonRamUsage NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonCurrentRamUsage, 
+                  prvtSysMonRamUsageLowThreshold, 
+                  prvtSysMonRamUsageHighThreshold }
+    STATUS      current
+    DESCRIPTION 
+        "Memory utilization test has passed the
+         program threshold."
+    ::= { prvtSysMonNotifications 2 }
+
+prvtSysMonPowerSupplyTest NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonPowerSupplyLastStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Result from power supply test has changed."
+    ::= { prvtSysMonNotifications 3 }
+
+prvtSysMonFansTest NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonFanLastStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Result from fan test has changed."
+    ::= { prvtSysMonNotifications 4 }
+
+prvtSysMonCpuTemperature NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonCurrentCpuTemperature, 
+                  prvtSysMonCpuTemperatureLowThreshold, 
+                  prvtSysMonCpuTemperatureHighThreshold }
+    STATUS      current
+    DESCRIPTION 
+        "CPU temperature test has passed the
+         program threshold."
+    ::= { prvtSysMonNotifications 5 }
+
+prvtSysMonPortStatisticsTest NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonPortStatisticsLastFailedPorts }
+    STATUS      current
+    DESCRIPTION 
+        "Result from port statistics test has changed."
+    ::= { prvtSysMonNotifications 6 }
+
+prvtSysMonPowerSupplyFansTest NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonPowerSupplyFanLastStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Result from power-supply-fan test has changed."
+    ::= { prvtSysMonNotifications 7 }
+
+prvtSysMonOnBoardPowerSupplyTest NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonOnboardPowerLastStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Result from onboard-power test has changed."
+    ::= { prvtSysMonNotifications 8 }
+
+prvtSysMonDoorOpenTest NOTIFICATION-TYPE
+    OBJECTS     { prvtSysMonDoorOpenLastStatus }
+    STATUS      current
+    DESCRIPTION 
+        "Result from door-open test has changed."
+    ::= { prvtSysMonNotifications 9 }
+
+END -- end of module PRVT-SYS-MON-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-TE-PARAM-MIB b/MIBS/telco-systems/binox/PRVT-TE-PARAM-MIB
new file mode 100644
index 0000000..42e5d14
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-TE-PARAM-MIB
@@ -0,0 +1,255 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-TE-PARAM-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-TE-PARAM-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    ifIndex
+        FROM IF-MIB
+    mpls
+        FROM PRVT-SWITCH-MIB
+    Integer32, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION
+        FROM SNMPv2-TC;
+
+prvtTeParamMIB MODULE-IDENTITY
+    LAST-UPDATED "201004280000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB module for management of TE-params entities."
+    REVISION    "201004280000Z"
+    DESCRIPTION 
+        "initial version"
+    ::= { mpls 9 }
+
+
+PrvtTeLinkBandwidthSpeed ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "Used in combination with PrvtTeLinkBandwidthUnits to specify a link's bandwidth."
+    SYNTAX      Unsigned32
+
+PrvtTeLinkBandwidthUnits ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "Used in combination with PrvtTeLinkBandwidthSpeed to specify a link's bandwidth."
+    SYNTAX      INTEGER { bps(0), kbps(1), mbps(2), gbps(3) }
+
+prvtTeParamMIBObjects OBJECT IDENTIFIER
+    ::= { prvtTeParamMIB 1 }
+
+prvtTeParamLinkTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtTeParamLinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "A table specifying the parameters of TE links."
+    ::= { prvtTeParamMIBObjects 2 }
+
+prvtTeParamLinkEntry OBJECT-TYPE
+    SYNTAX      PrvtTeParamLinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtTeParamLinkTable."
+    INDEX       { ifIndex }
+    ::= { prvtTeParamLinkTable 1 }
+
+PrvtTeParamLinkEntry ::= SEQUENCE {
+    prvtTeParamLinkRowStatus            RowStatus,
+    prvtTeParamLinkMetric               Unsigned32,
+    prvtTeParamLinkPhyBandwidthSpeed    PrvtTeLinkBandwidthSpeed,
+    prvtTeParamLinkPhyBandwidthUnits    PrvtTeLinkBandwidthUnits,
+    prvtTeParamLinkMaxRsvBwSpeed        PrvtTeLinkBandwidthSpeed,
+    prvtTeParamLinkMaxRsvBwUnits        PrvtTeLinkBandwidthUnits
+}
+
+prvtTeParamLinkRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for theprvtTeParamLinkTable."
+    ::= { prvtTeParamLinkEntry 1 }
+
+prvtTeParamLinkMetric OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Traffic engineering metric (TEM) for the TE link.
+         The TEM is derived from its component links.
+         All component links within the TE link must have the same TEM."
+    REFERENCE   
+        "Link Bundling in MPLS Traffic Engineering (TE), RFC 4201"
+    ::= { prvtTeParamLinkEntry 2 }
+
+prvtTeParamLinkPhyBandwidthSpeed OBJECT-TYPE
+    SYNTAX      PrvtTeLinkBandwidthSpeed
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used together with the prvtTeParamLinkPhyBandwidthUnits
+         object to specify the physical bandwidth for the TE link."
+    ::= { prvtTeParamLinkEntry 3 }
+
+prvtTeParamLinkPhyBandwidthUnits OBJECT-TYPE
+    SYNTAX      PrvtTeLinkBandwidthUnits
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used together with the prvtTeParamLinkPhyBandwidthSpeed
+         object to specify the physical bandwidth for the TE link."
+    ::= { prvtTeParamLinkEntry 4 }
+
+prvtTeParamLinkMaxRsvBwSpeed OBJECT-TYPE
+    SYNTAX      PrvtTeLinkBandwidthSpeed
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used together with the prvtTeParamLinkMaxRsvBwUnits
+         object to specify the maximum bandwidth for the TE link."
+    ::= { prvtTeParamLinkEntry 5 }
+
+prvtTeParamLinkMaxRsvBwUnits OBJECT-TYPE
+    SYNTAX      PrvtTeLinkBandwidthUnits
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Used together with the prvtTeParamLinkMaxRsvBwSpeed
+         object to specify the maximum bandwidth that can be reserved for the TE link."
+    ::= { prvtTeParamLinkEntry 6 }
+
+prvtTeParamLinkAdminGrpTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtTeParamLinkAdminGrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table specifying the administrative groups to which a TE link belongs."
+    ::= { prvtTeParamMIBObjects 3 }
+
+prvtTeParamLinkAdminGrpEntry OBJECT-TYPE
+    SYNTAX      PrvtTeParamLinkAdminGrpEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "An entry in prvtTeParamLinkAdminGrpTable."
+    INDEX       { ifIndex, prvtTeParamLinkAdminGrpId }
+    ::= { prvtTeParamLinkAdminGrpTable 1 }
+
+PrvtTeParamLinkAdminGrpEntry ::= SEQUENCE {
+    prvtTeParamLinkAdminGrpId           Integer32,
+    prvtTeParamLinkAdminGrpRowStatus    RowStatus
+}
+
+prvtTeParamLinkAdminGrpId OBJECT-TYPE
+    SYNTAX      Integer32 (1..32)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "ID of the administrative group to which the TE link belongs."
+    ::= { prvtTeParamLinkAdminGrpEntry 1 }
+
+prvtTeParamLinkAdminGrpRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for the prvtTeParamLinkAdminGrpTable."
+    ::= { prvtTeParamLinkAdminGrpEntry 2 }
+
+prvtTeParamAdminGroupTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtTeParamAdminGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table storing the identifiers for an administrative group."
+    ::= { prvtTeParamMIBObjects 5 }
+
+prvtTeParamAdminGroupEntry OBJECT-TYPE
+    SYNTAX      PrvtTeParamAdminGroupEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "prvtTeParamAdminGroupTable allows the specifying of a group-name to
+         each administrative group. Each group is uniquely identified by its
+         prvtTeParamAdminGroupId."
+    INDEX       { prvtTeParamAdminGroupId }
+    ::= { prvtTeParamAdminGroupTable 1 }
+
+PrvtTeParamAdminGroupEntry ::= SEQUENCE {
+    prvtTeParamAdminGroupId         Integer32,
+    prvtTeParamAdminGroupRowStatus  RowStatus,
+    prvtTeParamAdminGroupName       OCTET STRING
+}
+
+prvtTeParamAdminGroupId OBJECT-TYPE
+    SYNTAX      Integer32 (1..32)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "ID uniquely identifying an administrative group."
+    ::= { prvtTeParamAdminGroupEntry 1 }
+
+prvtTeParamAdminGroupRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The RowStatus entry for theprvtTeParamAdminGroupTable."
+    ::= { prvtTeParamAdminGroupEntry 2 }
+
+prvtTeParamAdminGroupName OBJECT-TYPE
+    SYNTAX      OCTET STRING (SIZE(1..15))
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The name of the administrative group."
+    ::= { prvtTeParamAdminGroupEntry 3 }
+
+END -- end of module PRVT-TE-PARAM-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-TEMIB-ENTITY-MIB b/MIBS/telco-systems/binox/PRVT-TEMIB-ENTITY-MIB
new file mode 100644
index 0000000..ebb16a6
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-TEMIB-ENTITY-MIB
@@ -0,0 +1,209 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-TEMIB-ENTITY-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-TEMIB-ENTITY-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    mpls
+        FROM PRVT-SWITCH-MIB
+    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtTeMibEntityMIB MODULE-IDENTITY
+    LAST-UPDATED "200712060000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "The MIB module for management of TE-MIB entities."
+    REVISION    "200712060000Z"
+    DESCRIPTION 
+        "Initial."
+    ::= { mpls 8 }
+
+
+PrvtTeMibAdminStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The desired administrative state of a TE-MIB entity."
+    SYNTAX      INTEGER { up(1), down(2) }
+
+PrvtTeMibOperStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The current operational state of a TE-MIB entity."
+    SYNTAX      INTEGER { up(1), down(2), goingUp(3), goingDown(4), 
+                    actFailed(5) }
+
+PrvtTeMibEntityIndex ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "d"
+    STATUS      current
+    DESCRIPTION 
+        "The index value identifying a TE-MIB entity."
+    SYNTAX      Unsigned32
+
+PrvtTeMibPartnerStatus ::= TEXTUAL-CONVENTION
+    STATUS      current
+    DESCRIPTION 
+        "The state of a TE-MIB entity partner."
+    SYNTAX      INTEGER { initial(0), activating(1), active(2), 
+                    deactivating(3), failedOver(4), failed(5), 
+                    unavailable(6) }
+
+prvtTeMibEntityMIBObjects OBJECT IDENTIFIER
+    ::= { prvtTeMibEntityMIB 1 }
+
+prvtMplsTeMibEntityTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtMplsTeMibEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The table of TE-MIB entities."
+    ::= { prvtTeMibEntityMIBObjects 1 }
+
+prvtMplsTeMibEntityEntry OBJECT-TYPE
+    SYNTAX      PrvtMplsTeMibEntityEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Each entry represents a TE-MIB entity."
+    INDEX       { prvtMplsTeMibEntityIndex }
+    ::= { prvtMplsTeMibEntityTable 1 }
+
+PrvtMplsTeMibEntityEntry ::= SEQUENCE {
+    prvtMplsTeMibEntityIndex        PrvtTeMibEntityIndex,
+    prvtMplsTeMibEntityRowStatus    RowStatus,
+    prvtMplsTeMibDynFacilityBypass  TruthValue
+}
+
+prvtMplsTeMibEntityIndex OBJECT-TYPE
+    SYNTAX      PrvtTeMibEntityIndex
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The index of this TE-MIB entity table entry. This is the
+         HAF entity index passed on the entity create parameters."
+    ::= { prvtMplsTeMibEntityEntry 1 }
+
+prvtMplsTeMibEntityRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The row status for the TE-MIB entity table entry, used to create
+         and destroy TE-MIB entities.
+         When prvtMplsTeMibEntityRowStatus is 'active' and
+         prvtMplsTeMibEntityAdminStatus is 'up' the TE-MIB entity is active
+         and only these two fields can be modified."
+    ::= { prvtMplsTeMibEntityEntry 2 }
+
+prvtMplsTeMibDynFacilityBypass OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "This object gives the user ability to globally enable/disable 
+         automatically creation of bypass tunnels for all LSPs. Bypass 
+         tunnels will be created on FRR tunnel request automatically.
+         The default value is true. The creation of Dynamic bypass tunnels 
+         is enabled"
+    ::= { prvtMplsTeMibEntityEntry 3 }
+
+mplsTunnelHoldTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..120)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "Defines a period in seconds needed to wait before rebuilding backup 
+         or primary tunnels if a frr condition occurs
+         Currently no more than 10 seconds are allowed"
+    ::= { prvtTeMibEntityMIBObjects 2 }
+
+prvtMplsTeMibEntityScalarTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtMplsTeMibEntityScalarEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The mplsTeMibEntityScalarTable contains all MPLS Tunnel
+         scalars."
+    ::= { prvtTeMibEntityMIBObjects 3 }
+
+prvtMplsTeMibEntityScalarEntry OBJECT-TYPE
+    SYNTAX      PrvtMplsTeMibEntityScalarEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The mplsTeMibEntityScalarTable contains all MPLS Tunnel
+         scalars."
+    INDEX       { prvtMplsTeMibEntityIndex }
+    ::= { prvtMplsTeMibEntityScalarTable 1 }
+
+PrvtMplsTeMibEntityScalarEntry ::= SEQUENCE {
+    mplsTunnelConfigured    Unsigned32,
+    mplsTunnelActive        Unsigned32
+}
+
+mplsTunnelConfigured OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of tunnels configured on this device. A
+         tunnel is considered configured if the
+         mplsTunnelRowStatus is active(1)."
+    ::= { prvtMplsTeMibEntityScalarEntry 1 }
+
+mplsTunnelActive OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of tunnels active on this device. A
+         tunnel is considered active if the
+         mplsTunnelOperStatus is up(1)."
+    ::= { prvtMplsTeMibEntityScalarEntry 2 }
+
+END -- end of module PRVT-TEMIB-ENTITY-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-TWAMP-MIB b/MIBS/telco-systems/binox/PRVT-TWAMP-MIB
new file mode 100644
index 0000000..244c039
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-TWAMP-MIB
@@ -0,0 +1,473 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-TWAMP-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-TWAMP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, 
+    NOTIFICATION-TYPE, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    MacAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue
+        FROM SNMPv2-TC;
+
+prvtTwampMIB MODULE-IDENTITY
+    LAST-UPDATED "201405160000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This MIB provides the extended capability of controlling and
+         provisioning of TWAMP tests."
+    REVISION    "201005270000Z"
+    DESCRIPTION 
+        "Initial version."
+    ::= { switch 240 }
+
+
+PrvtTwampTestNameType ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "32a"
+    STATUS      current
+    DESCRIPTION 
+        "TWAMP test name type (1..32 characters)."
+    SYNTAX      OCTET STRING (SIZE(1..32))
+
+PrvtTwampDecimalPercent ::= TEXTUAL-CONVENTION
+    DISPLAY-HINT "3d.2d"
+    STATUS      current
+    DESCRIPTION 
+        "A percentage value in decimal format."
+    SYNTAX      OCTET STRING (SIZE(1..10))
+
+prvtTwampNotifications OBJECT IDENTIFIER
+    ::= { prvtTwampMIB 0 }
+
+prvtTwampObjects OBJECT IDENTIFIER
+    ::= { prvtTwampMIB 1 }
+
+prvtTwampTest OBJECT IDENTIFIER
+    ::= { prvtTwampObjects 1 }
+
+prvtTwampTestTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtTwampTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table contains TWAMP tests."
+    ::= { prvtTwampTest 1 }
+
+prvtTwampTestEntry OBJECT-TYPE
+    SYNTAX      PrvtTwampTestEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in prvtTwampTestTable"
+    INDEX       { prvtTwampTestName }
+    ::= { prvtTwampTestTable 1 }
+
+PrvtTwampTestEntry ::= SEQUENCE {
+    prvtTwampTestName           PrvtTwampTestNameType,
+    prvtTwampTestRowStatus      RowStatus,
+    prvtTwampTestServer         IpAddress,
+    prvtTwampTestSessionsCount  Integer32,
+    prvtTwampTestPackets        Integer32,
+    prvtTwampTestTimeout        Integer32,
+    prvtTwampTestDelay          Integer32,
+    prvtTwampTestExecuteNow     Integer32
+}
+
+prvtTwampTestName OBJECT-TYPE
+    SYNTAX      PrvtTwampTestNameType
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "TWAMP test name."
+    ::= { prvtTwampTestEntry 1 }
+
+prvtTwampTestRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "Create/delete entry in prvtTwampTestTable."
+    ::= { prvtTwampTestEntry 2 }
+
+prvtTwampTestServer OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "TWAMP test server ip-address."
+    ::= { prvtTwampTestEntry 3 }
+
+prvtTwampTestSessionsCount OBJECT-TYPE
+    SYNTAX      Integer32 (1..10)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The number of parallel test sessions."
+    DEFVAL      { 1 }
+    ::= { prvtTwampTestEntry 4 }
+
+prvtTwampTestPackets OBJECT-TYPE
+    SYNTAX      Integer32 (10..1000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The number of packets in parallel sessions."
+    DEFVAL      { 300 }
+    ::= { prvtTwampTestEntry 5 }
+
+prvtTwampTestTimeout OBJECT-TYPE
+    SYNTAX      Integer32 (100..10000)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The timout interval of test packets (in milliseconds)."
+    DEFVAL      { 900 }
+    ::= { prvtTwampTestEntry 6 }
+
+prvtTwampTestDelay OBJECT-TYPE
+    SYNTAX      Integer32 (100..1500)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "The delay interval between test packets (in milliseconds)"
+    DEFVAL      { 100 }
+    ::= { prvtTwampTestEntry 7 }
+
+prvtTwampTestExecuteNow OBJECT-TYPE
+    SYNTAX      Integer32 (0..2)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "When this object is set to '1', command
+         self-test execute-now.  When this object is set to '2' 
+         the self-test is stopped. Setting the variable to '0'
+         results in an 'inconsistentValue' error.
+         Setting it to any other value has no effect.
+         
+         When this object is read, the value '0' is returned."
+    ::= { prvtTwampTestEntry 8 }
+
+prvtTwampServer OBJECT IDENTIFIER
+    ::= { prvtTwampObjects 2 }
+
+prvtTwampServerInnactivity OBJECT-TYPE
+    SYNTAX      Integer32 (1..900)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The server innactivity timeout interval of the TWAMP server (in seconds)."
+    DEFVAL      { 900 }
+    ::= { prvtTwampServer 2 }
+
+prvtTwampServerSessionInnactivity OBJECT-TYPE
+    SYNTAX      Integer32 (1..900)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The session innactivity timeout interval of the TWAMP server (in seconds)."
+    DEFVAL      { 900 }
+    ::= { prvtTwampServer 3 }
+
+prvtTwampServerMaxSessions OBJECT-TYPE
+    SYNTAX      Integer32 (1..1000)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The maximum number of controll sessions supported by the TWAMP server."
+    DEFVAL      { 10 }
+    ::= { prvtTwampServer 4 }
+
+prvtTwampServerMaxParallelSessions OBJECT-TYPE
+    SYNTAX      Integer32 (1..10)
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The maximum number of parallel test sessions for each client supperted by the TWAMP server."
+    DEFVAL      { 1 }
+    ::= { prvtTwampServer 5 }
+
+prvtTwampServerShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-write
+    STATUS      current
+    DESCRIPTION 
+        "The administrative state of the TWAMP server."
+    DEFVAL      { true }
+    ::= { prvtTwampServer 6 }
+
+prvtTwampClientTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtTwampClientEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table contains the allowed clients for the TWAMP server."
+    ::= { prvtTwampServer 7 }
+
+prvtTwampClientEntry OBJECT-TYPE
+    SYNTAX      PrvtTwampClientEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in twampClientTable."
+    INDEX       { prvtTwampClientIp }
+    ::= { prvtTwampClientTable 1 }
+
+PrvtTwampClientEntry ::= SEQUENCE {
+    prvtTwampClientIp           IpAddress,
+    prvtTwampClientRowStatus    RowStatus
+}
+
+prvtTwampClientIp OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "The ip-address of the client."
+    ::= { prvtTwampClientEntry 1 }
+
+prvtTwampClientRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        "create/delete entry in prvtTwampClientTable"
+    ::= { prvtTwampClientEntry 2 }
+
+prvtTwampServerControlSessions OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of current control sessions established on the TWAMP server."
+    ::= { prvtTwampServer 8 }
+
+prvtTwampServerTestSessions OBJECT-TYPE
+    SYNTAX      Integer32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of current test sessions established on the TWAMP server."
+    ::= { prvtTwampServer 9 }
+
+prvtTwampTestResult OBJECT IDENTIFIER
+    ::= { prvtTwampObjects 3 }
+
+prvtTwampTestResultTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtTwampTestResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Table contains statistics of the executed TWAMP tests."
+    ::= { prvtTwampTestResult 1 }
+
+prvtTwampTestResultEntry OBJECT-TYPE
+    SYNTAX      PrvtTwampTestResultEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "Entry in twampTestResultTable"
+    INDEX       { prvtTwampTestId, prvtTwampTestResultName }
+    ::= { prvtTwampTestResultTable 1 }
+
+PrvtTwampTestResultEntry ::= SEQUENCE {
+    prvtTwampTestId                 Unsigned32,
+    prvtTwampTestResultName         PrvtTwampTestNameType,
+    prvtTwampTestStartTime          Unsigned32,
+    prvtTwampTestServerAddress      IpAddress,
+    prvtTwampTestSessions           Unsigned32,
+    prvtTwampTestState              INTEGER,
+    prvtTwampTestRtt                Counter64,
+    prvtTwampTestMinRtt             Counter64,
+    prvtTwampTestMaxRtt             Counter64,
+    prvtTwampTestPcktSent           Unsigned32,
+    prvtTwampTestPcktLost           Unsigned32,
+    prvtTwampTestPcktDrop           Unsigned32,
+    prvtTwampTestVariation          Counter64,
+    prvtTwampTestVariationLow       PrvtTwampDecimalPercent,
+    prvtTwampTestVariationMiddle    PrvtTwampDecimalPercent,
+    prvtTwampTestVariationHigh      PrvtTwampDecimalPercent
+}
+
+prvtTwampTestId OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The internal ID of the TWAMP test instance."
+    ::= { prvtTwampTestResultEntry 1 }
+
+prvtTwampTestResultName OBJECT-TYPE
+    SYNTAX      PrvtTwampTestNameType
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "TWAMP test name."
+    ::= { prvtTwampTestResultEntry 2 }
+
+prvtTwampTestStartTime OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The start time of the TWAMP test instance."
+    ::= { prvtTwampTestResultEntry 3 }
+
+prvtTwampTestServerAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The server ip-address of the TWAMP test instance."
+    ::= { prvtTwampTestResultEntry 4 }
+
+prvtTwampTestSessions OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of parallel test sessions of the TWAMP test instance."
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 5 }
+
+prvtTwampTestState OBJECT-TYPE
+    SYNTAX      INTEGER { failed(1), running(2), stopped(3), finished(4) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The status of the executed TWAMP test instance."
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 6 }
+
+prvtTwampTestRtt OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The average round-trip time of the TWAMP test sample."
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 7 }
+
+prvtTwampTestMinRtt OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The minimum round-trip time of the TWAMP test sample."
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 8 }
+
+prvtTwampTestMaxRtt OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The maximum round-trip time of the TWAMP test sample."
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 9 }
+
+prvtTwampTestPcktSent OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of test packets sent for the TWAMP test instance."
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 10 }
+
+prvtTwampTestPcktLost OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of lost test packets."
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 11 }
+
+prvtTwampTestPcktDrop OBJECT-TYPE
+    SYNTAX      Unsigned32
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The number of dropped test packets."
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 12 }
+
+prvtTwampTestVariation OBJECT-TYPE
+    SYNTAX      Counter64
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The maximum module variation of the TWAMP test sample"
+    DEFVAL      { 0 }
+    ::= { prvtTwampTestResultEntry 13 }
+
+prvtTwampTestVariationLow OBJECT-TYPE
+    SYNTAX      PrvtTwampDecimalPercent
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The percent of singletons whose variation is less than 10% of the negated maximum module variation of the sample."
+    ::= { prvtTwampTestResultEntry 14 }
+
+prvtTwampTestVariationMiddle OBJECT-TYPE
+    SYNTAX      PrvtTwampDecimalPercent
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The percent of singletons whose variation by module is less than 10% of the maximum module variation of the sample."
+    ::= { prvtTwampTestResultEntry 15 }
+
+prvtTwampTestVariationHigh OBJECT-TYPE
+    SYNTAX      PrvtTwampDecimalPercent
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        "The percent of singletons whose variation is greater than 10% of the maximum module variation of the sample."
+    ::= { prvtTwampTestResultEntry 16 }
+
+END -- end of module PRVT-TWAMP-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-VENDORDEF-MIB b/MIBS/telco-systems/binox/PRVT-VENDORDEF-MIB
new file mode 100644
index 0000000..f2cb001
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-VENDORDEF-MIB
@@ -0,0 +1,70 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-VENDORDEF-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-VENDORDEF-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    MODULE-IDENTITY, OBJECT-IDENTITY, enterprises
+        FROM SNMPv2-SMI;
+
+prvtVendorDefMIB MODULE-IDENTITY
+    LAST-UPDATED "200709290000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "Vendor Id Definition"
+    REVISION    "200709290000Z"
+    DESCRIPTION 
+        "Initial."
+    ::= { enterprises 738 }
+
+
+prvt-products OBJECT-IDENTITY
+    STATUS      current
+    DESCRIPTION 
+        "prvt-product"
+    ::= { prvtVendorDefMIB 10 }
+
+END -- end of module PRVT-VENDORDEF-MIB.
diff --git a/MIBS/telco-systems/binox/PRVT-VRRP-MIB b/MIBS/telco-systems/binox/PRVT-VRRP-MIB
new file mode 100644
index 0000000..480fc25
--- /dev/null
+++ b/MIBS/telco-systems/binox/PRVT-VRRP-MIB
@@ -0,0 +1,285 @@
+-- *********************************************************************
+-- **
+-- ** BATM Advanced Communications.
+-- **
+-- *********************************************************************
+-- ** Filename: PRVT-VRRP-MIB.mib
+-- ** Project: T-Metro Switches.
+-- ** Purpose: Private MIB
+-- *********************************************************************
+-- (c) Copyright, 2009, BATM Advanced Communications. All rights reserved.
+-- WARNING:
+--
+-- BY UTILIZING THIS FILE, YOU AGREE TO THE FOLLOWING:
+--
+-- This file is the property of BATM Advanced Communications and contains
+-- proprietary and confidential information. This file is made
+-- available to authorized BATM customers on the express
+-- condition that neither it, nor any of the information contained
+-- therein, shall be disclosed to third parties or be used for any
+-- purpose other than to replace, modify or upgrade firmware and/or
+-- software components of BATM manufactured equipment within the
+-- authorized customer's network, and that such transfer be
+-- completed in accordance with the instructions provided by
+-- BATM. Any other use is strictly prohibited.
+--
+-- EXCEPT AS RESTRICTED BY LAW, OR AS PROVIDED IN BATM'S LIMITED
+-- WARRANTY, THE SOFTWARE PROGRAMS CONTAINED IN THIS FILE ARE
+-- PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+-- OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES
+-- OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+--
+-- IN NO EVENT SHALL BATM BE LIABLE FOR ANY DAMAGES WHATSOEVER
+-- INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
+-- PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION OR
+-- OTHER CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE, OR INABILITY
+-- TO USE, THE SOFTWARE CONTAINED IN THIS FILE.
+--
+-- ----------------------------------------------------------------------------
+
+PRVT-VRRP-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    switch
+        FROM PRVT-SWITCH-MIB
+    IpAddress, MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
+        FROM SNMPv2-SMI
+    RowStatus, TruthValue
+        FROM SNMPv2-TC;
+
+prvtVrrpMIB MODULE-IDENTITY
+    LAST-UPDATED "201411100000Z"
+    ORGANIZATION 
+        "BATM Advanced Communication"
+    CONTACT-INFO 
+        "BATM/Telco Systems Support team
+         Email:
+         For North America: techsupport@telco.com
+         For North Europe: support@batm.de, info@batm.de
+         For the rest of the world: techsupport@telco.com"
+    DESCRIPTION 
+        "This MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers."
+    REVISION    "201411100000Z"
+    DESCRIPTION 
+        "Initial version"
+    ::= { switch 167 }
+
+
+prvtVrrpObjects OBJECT IDENTIFIER
+    ::= { prvtVrrpMIB 1 }
+
+prvtVrrpVirtualRouterTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtVrrpVirtualRouterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpObjects 1 }
+
+prvtVrrpVirtualRouterEntry OBJECT-TYPE
+    SYNTAX      PrvtVrrpVirtualRouterEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        "NONE"
+    INDEX       { prvtVrrpVirtualRouterId }
+    ::= { prvtVrrpVirtualRouterTable 1 }
+
+PrvtVrrpVirtualRouterEntry ::= SEQUENCE {
+    prvtVrrpVirtualRouterId                     Unsigned32,
+    prvtVrrpVirtualRouterRowStatus              RowStatus,
+    prvtVrrpVirtualRouterShutdown               TruthValue,
+    prvtVrrpVirtualRouterPreempt                TruthValue,
+    prvtVrrpVirtualRouterPriority               Unsigned32,
+    prvtVrrpVirtualRouterVersion                Unsigned32,
+    prvtVrrpVirtualRouterAdvertisedInterval     Unsigned32,
+    prvtVrrpVirtualRouterAcceptMode             INTEGER,
+    prvtVrrpVirtualRouterInterface              OCTET STRING,
+    prvtVrrpVirtualRouterTraceUplinkThreshold   Unsigned32,
+    prvtVrrpVirtualRouterTraceUplinkFlushTimer  Unsigned32,
+    prvtVrrpVirtualRouterStateVrrp              INTEGER
+}
+
+prvtVrrpVirtualRouterId OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..255)
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 1 }
+
+prvtVrrpVirtualRouterRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 2 }
+
+prvtVrrpVirtualRouterShutdown OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 3 }
+
+prvtVrrpVirtualRouterPreempt OBJECT-TYPE
+    SYNTAX      TruthValue
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 4 }
+
+prvtVrrpVirtualRouterPriority OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..254)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 5 }
+
+prvtVrrpVirtualRouterVersion OBJECT-TYPE
+    SYNTAX      Unsigned32 (1..3)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 6 }
+
+prvtVrrpVirtualRouterAdvertisedInterval OBJECT-TYPE
+    SYNTAX      Unsigned32 (0 | 10..4095)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 7 }
+
+prvtVrrpVirtualRouterAcceptMode OBJECT-TYPE
+    SYNTAX      INTEGER { none(0), icmp(1), all(2) }
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 8 }
+
+prvtVrrpVirtualRouterInterface OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 9 }
+
+prvtVrrpVirtualRouterTraceUplinkThreshold OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..100)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 10 }
+
+prvtVrrpVirtualRouterTraceUplinkFlushTimer OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..101)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 11 }
+
+prvtVrrpVirtualRouterStateVrrp OBJECT-TYPE
+    SYNTAX      INTEGER { init(1), backup(2), master(3), initWait(4), 
+                    none(5) }
+    MAX-ACCESS  read-only
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualRouterEntry 12 }
+
+prvtVrrpVirtualIpAddressTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtVrrpVirtualIpAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpObjects 2 }
+
+prvtVrrpVirtualIpAddressEntry OBJECT-TYPE
+    SYNTAX      PrvtVrrpVirtualIpAddressEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    INDEX       { prvtVrrpVirtualRouterId, prvtVrrpVirtualIpAddress }
+    ::= { prvtVrrpVirtualIpAddressTable 1 }
+
+PrvtVrrpVirtualIpAddressEntry ::= SEQUENCE {
+    prvtVrrpVirtualIpAddress            IpAddress,
+    prvtVrrpVirtualIpAddressRowStatus   RowStatus,
+    prvtVrrpVirtualIpAddressRange       Unsigned32
+}
+
+prvtVrrpVirtualIpAddress OBJECT-TYPE
+    SYNTAX      IpAddress
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualIpAddressEntry 1 }
+
+prvtVrrpVirtualIpAddressRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualIpAddressEntry 2 }
+
+prvtVrrpVirtualIpAddressRange OBJECT-TYPE
+    SYNTAX      Unsigned32 (0..10)
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpVirtualIpAddressEntry 3 }
+
+prvtVrrpTraceUplinkTable OBJECT-TYPE
+    SYNTAX      SEQUENCE OF PrvtVrrpTraceUplinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpObjects 3 }
+
+prvtVrrpTraceUplinkEntry OBJECT-TYPE
+    SYNTAX      PrvtVrrpTraceUplinkEntry
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    INDEX       { prvtVrrpVirtualRouterId, prvtVrrpTraceUplinkName }
+    ::= { prvtVrrpTraceUplinkTable 1 }
+
+PrvtVrrpTraceUplinkEntry ::= SEQUENCE {
+    prvtVrrpTraceUplinkName         OCTET STRING,
+    prvtVrrpTraceUplinkRowStatus    RowStatus
+}
+
+prvtVrrpTraceUplinkName OBJECT-TYPE
+    SYNTAX      OCTET STRING
+    MAX-ACCESS  not-accessible
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpTraceUplinkEntry 1 }
+
+prvtVrrpTraceUplinkRowStatus OBJECT-TYPE
+    SYNTAX      RowStatus
+    MAX-ACCESS  read-create
+    STATUS      current
+    DESCRIPTION 
+        ""
+    ::= { prvtVrrpTraceUplinkEntry 2 }
+
+END -- end of module PRVT-VRRP-MIB.