diff options
Diffstat (limited to 'MIBS/junos/JUNIPER-TWAMP-MIB')
| -rw-r--r-- | MIBS/junos/JUNIPER-TWAMP-MIB | 903 |
1 files changed, 903 insertions, 0 deletions
diff --git a/MIBS/junos/JUNIPER-TWAMP-MIB b/MIBS/junos/JUNIPER-TWAMP-MIB new file mode 100644 index 0000000..d5e08c5 --- /dev/null +++ b/MIBS/junos/JUNIPER-TWAMP-MIB @@ -0,0 +1,903 @@ +-- +-- Juniper Enterprise Specific MIB: TWAMP MIB +-- +-- Copyright (c) 2007, Juniper Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + +JUNIPER-TWAMP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32 + FROM SNMPv2-SMI -- RFC2578 + NOTIFICATION-TYPE, OBJECT-IDENTITY,IpAddress + FROM SNMPv2-SMI + DateAndTime, TEXTUAL-CONVENTION, DisplayString + FROM SNMPv2-TC + CounterBasedGauge64 + FROM HCNUM-TC + pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex + FROM DISMAN-PING-MIB + jnxTwampMibRoot, jnxTwampNotificationPrefix + FROM JUNIPER-SMI + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB; + +jnxTwampMib MODULE-IDENTITY + LAST-UPDATED "201403010000Z" + ORGANIZATION "Juniper Networks, Inc." + CONTACT-INFO + " Juniper Technical Assistance Center + Juniper Networks, Inc. + 1133 Innovation Way + Sunnyvale, CA 94089 + E-mail: support@juniper.net" + + DESCRIPTION + "This mib provides data associated with the TWAMP feature" + -- revision history + REVISION "201403010000Z" + DESCRIPTION + "Initial definition." + ::= { jnxTwampMibRoot 1 } + + +JnxTwampClientCollectionType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each TWAMP entry can maintain several collections of probes and + provide separate calculations over each collection. The types of + collections include: + + currentTest -- the test currently being executed + lastCompletedTest -- the most recently completed test + movingAverage -- the 'n' most recent probes (n is configurable) + allTests -- all the probes (since the entry was last + reset). + + Objects with this type identify a specific collection." + SYNTAX INTEGER { + currentTest (1), + lastCompletedTest (2), + movingAverage (3), + allTests (4) + } + +JnxTwampClientMeasurementType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "For each individual probe, several different measurements can be + made. These include the following (all measurements are provided + in units of microseconds): + + roundTripTime -- this is the delay between the the transmission of + a probe and the arrival of its response. + + rttJitter -- this is the difference between the current round trip + time measurement and the previous one. + + rttInterarrivalJitter -- An estimate of the statistical variance + of a packet's interarrival time. Defined in rfc1889 as: + + J=J+(|D(i-1,i)|-J)/16 + + where J is the interarrival jitter and D(i-1, i) is the current + round trip jitter measurement. + + egress -- this is the delay beween the transmission of a probe and + its arrival at its destination. + + egressJitter -- this is the difference between the current egress + delay the previous measurement. + + egressInterarrivalJitter -- similar to rttInterarrivalJitter, but + applied to egress jitter measurements. + + ingress -- this is the delay between the transmission of a probe + response and its arrival at its destination. + + ingressJitter -- this is the difference between the current ingress + delay and the previous measurement. + + ingressInterarrivalJitter -- similar to rttInterarrivalJitter, but + applied to ingress jitter measurements. + Note, due to clock synchronization artifacts, many one-way + jitter measurements & calculations may include signifacant variations, + in some cases orders of magnitude greater than the round trip times. + Because of this, one-way jitter measurements will only be performed + on samples which are less than 10 seconds apart." + SYNTAX INTEGER { + roundTripTime (1), + rttJitter (2), + rttInterarrivalJitter (3), + egress (4), + egressJitter (5), + egressInterarrivalJitter (6), + ingress (7), + ingressJitter (8), + ingressInterarrivalJitter (9) + } + +JnxTwampClientMeasurementSet ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Over each collection of probes, TWAMP calculates statistics for several + sets of measurements. These sets include the following: + + roundTripTime -- the set of round trip delays + posRttJitter -- the set of positive round trip jitter + measurements + negRttJitter -- the set of negative round trip jitter + measurements + egress -- the set of outgoing (source to destination) + one-way delays + posEgressJitter -- the set of positive egress jitter measurements + negEgressJitter -- the set of negative egress jitter measurements + ingress -- the set of incoming (destination to source) + one-way delays + posIngressJitter -- the set of positive ingress jitter measurements + negIngressJitter -- the set of negative ingress jitter measurements + + Objects with this type identify a specific set of measurements." + SYNTAX INTEGER { + roundTripTime (1), + posRttJitter (2), + negRttJitter (3), + egress (4), + posEgressJitter (5), + negEgressJitter (6), + ingress (7), + posIngressJitter (8), + negIngressJitter (9) + } + +JnxTwampPercentType ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d-6" + STATUS current + DESCRIPTION + "Displays a percentage as decimal with 6 digits precision." + SYNTAX Unsigned32(0..100000000) + + +jnxTwampClientNode OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The node contains all the TWAMP client related tables." +::= {jnxTwampMib 1} + +jnxTwampRpmIdentity OBJECT-TYPE + SYNTAX INTEGER { + rpm(1), + twamp(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object is added to be binded to the traps. This object simply identifies if + its an RPM type of test or a TWAMP type of test." +::= {jnxTwampMib 2} + +-- +-- Sample Results Table +-- + jnxTwampClientResultsSampleTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxTwampClientResultsSampleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides measurements from the latest individual TWAMP + probe samples. Within each sample, the specific measurement type + is identified by jnxTwampClientResSampleType. Note, if the latest + probe was unsuccessful, no measurement types will be available. + + See the definition of JnxTwampClientMeasurementType for details on + the types of measurements available." + ::= { jnxTwampClientNode 1 } + + jnxTwampClientResultsSampleEntry OBJECT-TYPE + SYNTAX JnxTwampClientResultsSampleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry provides a specific measurement type for a single + probe." + INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSampleType } + ::= { jnxTwampClientResultsSampleTable 1 } + + JnxTwampClientResultsSampleEntry ::= + SEQUENCE { + jnxTwampResSampleType JnxTwampClientMeasurementType, + jnxTwampResSampleValue Integer32, + jnxTwampResSampleDate DateAndTime + } + + jnxTwampResSampleType OBJECT-TYPE + SYNTAX JnxTwampClientMeasurementType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object identifies the specific measurement type returned + by jnxTwampResSampleValue." + ::= { jnxTwampClientResultsSampleEntry 1 } + + jnxTwampResSampleValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object returns the measurement identified by the corresponding + jnxTwampResSampleType." + ::= { jnxTwampClientResultsSampleEntry 2 } + + jnxTwampResSampleDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the date and time of when this measurement + was obtained." + ::= { jnxTwampClientResultsSampleEntry 3 } + + +-- +-- Summary Results Table +-- + jnxTwampClientResultsSummaryTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxTwampClientResultsSummaryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides a summary of the results for a specific + TWAMP entry (identified by pingCtlOwnerIndex/pingCtlTestName). + The scope of the summary is identified by jnxTwampClientResSumCollection." + ::= { jnxTwampClientNode 2 } + + jnxTwampClientResultsSummaryEntry OBJECT-TYPE + SYNTAX JnxTwampClientResultsSummaryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in the table provides a summary of the TWAMP results + over a single collection of probes(test session). For each TWAMP entry, there + are several collections maintained: the current test, the + most recently completed test, a configurable number of the most + recent probes (aka 'moving average'), and a global collection + representing all the probes. Each entry in this table summarizes + the results for one of these collections." + INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSumCollection } + ::= { jnxTwampClientResultsSummaryTable 1 } + + JnxTwampClientResultsSummaryEntry ::= + SEQUENCE { + jnxTwampResSumCollection JnxTwampClientCollectionType, + jnxTwampResSumSent Unsigned32, + jnxTwampResSumReceived Unsigned32, + jnxTwampResSumPercentLost JnxTwampPercentType, + jnxTwampResSumDate DateAndTime + } + + jnxTwampResSumCollection OBJECT-TYPE + SYNTAX JnxTwampClientCollectionType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object identifes the collection of probes over which the + summary data represented by the other objects in this table + applies. Note, if a collection type is not supported or not + configured, it will not be instantiated in this table." + ::= { jnxTwampClientResultsSummaryEntry 1 } + + jnxTwampResSumSent OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the number of probes sent within the + collection identified by jnxTwampResSumCollection." + ::= { jnxTwampClientResultsSummaryEntry 2 } + + jnxTwampResSumReceived OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the number of probes received within the + collection identified by jnxTwampResSumCollection." + ::= { jnxTwampClientResultsSummaryEntry 3 } + + jnxTwampResSumPercentLost OBJECT-TYPE + SYNTAX JnxTwampPercentType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the percentage of probes lost within the + collection identified by jnxTwampResSumCollection." + ::= { jnxTwampClientResultsSummaryEntry 4 } + + jnxTwampResSumDate OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the date and time of when the most recent + probe within the collection identified by jnxTwampResSumCollection + was completed." + ::= { jnxTwampClientResultsSummaryEntry 5 } +--- +--Calculated Results Table +-- + jnxTwampClientResultsCalculatedTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxTwampClientResultsCalculatedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides a set of calculated values for each + TWAMP entry, for each collection of probes maintained within that + entry, and for each supported measurement set within that + collection of probes. + + This table will skip over any measurement set for which + there are 0 samples." + ::= { jnxTwampClientNode 3 } + + jnxTwampClientResultsCalculatedEntry OBJECT-TYPE + SYNTAX JnxTwampClientResultsCalculatedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSumCollection, + jnxTwampResCalcSet } + ::= { jnxTwampClientResultsCalculatedTable 1 } + + JnxTwampClientResultsCalculatedEntry ::= + SEQUENCE { + jnxTwampResCalcSet JnxTwampClientMeasurementSet, + jnxTwampResCalcSamples Unsigned32, + jnxTwampResCalcMin Unsigned32, + jnxTwampResCalcMax Unsigned32, + jnxTwampResCalcAverage Unsigned32, + jnxTwampResCalcPkToPk Unsigned32, + jnxTwampResCalcStdDev Unsigned32, + jnxTwampResCalcSum CounterBasedGauge64 + } + + jnxTwampResCalcSet OBJECT-TYPE + SYNTAX JnxTwampClientMeasurementSet + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object identifies the measurement set upon which the + calculations returned by the other objects in this table are + based." + ::= { jnxTwampClientResultsCalculatedEntry 1 } + + jnxTwampResCalcSamples OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of samples used in this calculations." + ::= { jnxTwampClientResultsCalculatedEntry 2 } + + jnxTwampResCalcMin OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum of all the samples in the collection and measurement + set associated with this row. Values are provided in units + of microseconds." + ::= { jnxTwampClientResultsCalculatedEntry 3 } + + jnxTwampResCalcMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum of all the samples in the collection and measurement + set associated with this row. Values are provided in units + of microseconds." + ::= { jnxTwampClientResultsCalculatedEntry 4 } + jnxTwampResCalcAverage OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average of all the samples in the collection and measurement + set associated with this row. Values are provided in units + of microseconds." + ::= { jnxTwampClientResultsCalculatedEntry 5 } + + jnxTwampResCalcPkToPk OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The difference between the minimum and maximum of all the samples + in the collection and measurement set associated with this row. + Values are provided in units of microseconds." + ::= { jnxTwampClientResultsCalculatedEntry 6 } + + jnxTwampResCalcStdDev OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The standard deviation calculated over all the samples + in the collection and measurement set associated with this row. + Values are provided in units of microseconds." + ::= { jnxTwampClientResultsCalculatedEntry 7 } + + jnxTwampResCalcSum OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sum of all the samples in the collection and measurement set + associated with this row. Values are provided in units of + microseconds." + ::= { jnxTwampClientResultsCalculatedEntry 8 } + + +-- +-- History Sample Table +-- + jnxTwampClientHistorySampleTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxTwampClientHistorySampleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides measurements for individual TWAMP probe samples(test sessions). + In addition to the last completed sample, a configurable number of + the most recent samples are available as well. Within each sample, + the specific measurement type is identified by + jnxTwampHistSampleType. Note, if probe was unsuccessful, no + measurement types will be available for that history entry. + + See the definition of JnxTwampClientMeasurementType for details on + of measurements available." + ::= { jnxTwampClientNode 4 } + + jnxTwampClientHistorySampleEntry OBJECT-TYPE + SYNTAX JnxTwampClientHistorySampleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex, + jnxTwampHistSampleType } + ::= { jnxTwampClientHistorySampleTable 1 } + + JnxTwampClientHistorySampleEntry ::= + SEQUENCE { + jnxTwampHistSampleType JnxTwampClientMeasurementType, + jnxTwampHistSampleValue Integer32 + } + + jnxTwampHistSampleType OBJECT-TYPE + SYNTAX JnxTwampClientMeasurementType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object identifies the specific measurement type returned + by jnxTwampHistSampleValue." + ::= { jnxTwampClientHistorySampleEntry 1 } + + jnxTwampHistSampleValue OBJECT-TYPE + SYNTAX Integer32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object returns the measurement identified by the corresponding + jnxTwampHistSampleType." + ::= { jnxTwampClientHistorySampleEntry 2 } + +-- +-- History Summary Table +-- + jnxTwampClientHistorySummaryTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxTwampClientHistorySummaryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides historical summary data for each collection + of probes(test session) within each TWAMP Control Entry, similar to the + jnxTwampClientResultsSummaryTable. + + In addition to the current summary, this table provides the same + number of historical entries as the jnxTwampClientHistorySampleTable." + ::= { jnxTwampClientNode 5 } + + jnxTwampClientHistorySummaryEntry OBJECT-TYPE + SYNTAX JnxTwampClientHistorySummaryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex, + jnxTwampHistSumCollection } + ::= { jnxTwampClientHistorySummaryTable 1 } + + JnxTwampClientHistorySummaryEntry ::= + SEQUENCE { + jnxTwampHistSumCollection JnxTwampClientCollectionType, + jnxTwampHistSumSent Unsigned32, + jnxTwampHistSumReceived Unsigned32, + jnxTwampHistSumPercentLost JnxTwampPercentType + } + + jnxTwampHistSumCollection OBJECT-TYPE + SYNTAX JnxTwampClientCollectionType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Identifies the collection of probes whose results are summarized by + this row. + + At this time, historical summaries are available only for the + current test (currentTest(1))." + ::= { jnxTwampClientHistorySummaryEntry 1 } + + jnxTwampHistSumSent OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the number of probes sent within the + collection identified by jnxTwampHistSumCollection." + ::= { jnxTwampClientHistorySummaryEntry 2 } + + jnxTwampHistSumReceived OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the number of probes received within the + collection identified by jnxTwampHistSumCollection." + ::= { jnxTwampClientHistorySummaryEntry 3 } + + jnxTwampHistSumPercentLost OBJECT-TYPE + SYNTAX JnxTwampPercentType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object provides the percentage of probes lost within the + collection identified by jnxTwampHistSumCollection." + ::= { jnxTwampClientHistorySummaryEntry 4 } + + + +-- +-- History Calculated Table +-- + jnxTwampClientHistoryCalculatedTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxTwampClientHistoryCalculatedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table provides a set of calculated values for each + TWAMP control entry, for each test session maintained within that + entry, and for each supported calculated type within that + collection of probes, similar to the jnxTwampClientResultsCalculatedTable. + + In addition to the current summary, this table provides the same + number of historical entries as the jnxTwampClientHistorySampleTable." + ::= { jnxTwampClientNode 6 } + + jnxTwampClientHistoryCalculatedEntry OBJECT-TYPE + SYNTAX JnxTwampClientHistoryCalculatedEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex, + jnxTwampHistSumCollection, jnxTwampHistCalcSet } + ::= { jnxTwampClientHistoryCalculatedTable 1 } + JnxTwampClientHistoryCalculatedEntry ::= + SEQUENCE { + jnxTwampHistCalcSet JnxTwampClientMeasurementSet, + jnxTwampHistCalcSamples Unsigned32, + jnxTwampHistCalcMin Unsigned32, + jnxTwampHistCalcMax Unsigned32, + jnxTwampHistCalcAverage Unsigned32, + jnxTwampHistCalcPkToPk Unsigned32, + jnxTwampHistCalcStdDev Unsigned32, + jnxTwampHistCalcSum CounterBasedGauge64 + } + + jnxTwampHistCalcSet OBJECT-TYPE + SYNTAX JnxTwampClientMeasurementSet + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object identifies the measurement set upon which the + calculations returned by the other objects in this table are + based." + ::= { jnxTwampClientHistoryCalculatedEntry 1 } + + jnxTwampHistCalcSamples OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of samples used in this calculations." + ::= { jnxTwampClientHistoryCalculatedEntry 2 } + + jnxTwampHistCalcMin OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The minimum of all the samples in the collection and measurement + set associated with this row. Values are provided in units + of microseconds." + ::= { jnxTwampClientHistoryCalculatedEntry 3 } + jnxTwampHistCalcMax OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The maximum of all the samples in the collection and measurement + set associated with this row. Values are provided in units + of microseconds." + ::= { jnxTwampClientHistoryCalculatedEntry 4 } + + jnxTwampHistCalcAverage OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average of all the samples in the collection and measurement + set associated with this row. Values are provided in units + of microseconds." + ::= { jnxTwampClientHistoryCalculatedEntry 5 } + + jnxTwampHistCalcPkToPk OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The difference between the minimum and maximum of all the samples + in the collection and measurement set associated with this row. + Values are provided in units of microseconds." + ::= { jnxTwampClientHistoryCalculatedEntry 6 } + + jnxTwampHistCalcStdDev OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The standard deviation calculated over all the samples + in the collection and measurement set associated with this row. + Values are provided in units of microseconds." + ::= { jnxTwampClientHistoryCalculatedEntry 7 } + + jnxTwampHistCalcSum OBJECT-TYPE + SYNTAX CounterBasedGauge64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The sum of all the samples in the collection and measurement set + associated with this row. Values are provided in units of + microseconds." + ::= { jnxTwampClientHistoryCalculatedEntry 8 } + +-- Control Sessions Table -- + jnxTwampClientControlConnectionTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxTwampClientCCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of Client Sessions." + ::= { jnxTwampClientNode 7 } + + jnxTwampClientCCEntry OBJECT-TYPE + SYNTAX JnxTwampClientCCEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "TWAMP Client Session characteristics." + INDEX { jnxTwampClientControlConnectionID } + ::= { jnxTwampClientControlConnectionTable 1 } + + + JnxTwampClientCCEntry ::= + SEQUENCE { + jnxTwampClientControlConnectionID SnmpAdminString, + jnxTwampClientCCName DisplayString, + jnxTwampClientCCStatus INTEGER(0..65535), + jnxTwampClientServerAddress IpAddress, + jnxTwampClientServerPort INTEGER(0..65535), + jnxTwampClientTSConfiguredCount INTEGER(0..65535), + jnxTwampClientTSActiveCount INTEGER(0..65535), + jnxTwampClientAuthMode INTEGER(0..65535) + } + + jnxTwampClientControlConnectionID OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "TWAMP Client control session ID." + ::= { jnxTwampClientCCEntry 1 } + + jnxTwampClientCCName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Text string containing the session's unique name." + ::= { jnxTwampClientCCEntry 2 } + + jnxTwampClientCCStatus OBJECT-TYPE + SYNTAX INTEGER { + active(1), + stopped(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If the control session is active, this would return 1. + If the control session does not have any currently + running test sessions and is not active, this would return 2." + ::= { jnxTwampClientCCEntry 3 } + + jnxTwampClientServerAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Server IP address for TWAMP TCP control session." + ::= { jnxTwampClientCCEntry 4 } + jnxTwampClientServerPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Destination port for TWAMP TCP control connection." + ::= { jnxTwampClientCCEntry 5 } + + jnxTwampClientTSConfiguredCount OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number test sessions configured." + ::= { jnxTwampClientCCEntry 6 } + + jnxTwampClientTSActiveCount OBJECT-TYPE + SYNTAX INTEGER(0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of test sessions currently running." + ::= { jnxTwampClientCCEntry 7 } + + jnxTwampClientAuthMode OBJECT-TYPE + SYNTAX INTEGER { + none(1), + authenticated(2), + encrypted(3), + controlOnlyEncrypted(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " Authenticated mode for the control session." + ::= {jnxTwampClientCCEntry 8 } + +--- Table containing entries for all test sessions + jnxTwampClientTestSessionsTable OBJECT-TYPE + SYNTAX SEQUENCE OF JnxTwampClientTSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of Test Sessions." + ::= {jnxTwampClientNode 8} + + jnxTwampClientTSEntry OBJECT-TYPE + SYNTAX JnxTwampClientTSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "TWAMP Test Session characteristics." + INDEX {pingCtlOwnerIndex, jnxTwampClientTestSessionID } + ::= { jnxTwampClientTestSessionsTable 1 } + + JnxTwampClientTSEntry ::= SEQUENCE { + jnxTwampClientTestSessionID SnmpAdminString, + jnxTwampClientTSName DisplayString, + jnxTwampClientTSStatus INTEGER, + jnxTwampClientTSSenderAddress IpAddress, + jnxTwampClientTSSenderPort INTEGER, + jnxTwampClientTSReflectorAddress IpAddress, + jnxTwampClientTSReflectorPort INTEGER + } + + jnxTwampClientTestSessionID OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE(0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Test Session ID." + ::= { jnxTwampClientTSEntry 1 } + + + jnxTwampClientTSName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TWAMP Test Session Name." + ::= {jnxTwampClientTSEntry 2 } + + jnxTwampClientTSStatus OBJECT-TYPE + SYNTAX INTEGER { + active (1), + stopped (2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TWAMP Test Session status." + ::= {jnxTwampClientTSEntry 3 } + jnxTwampClientTSSenderAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Twamp Test Sender Address." + ::= {jnxTwampClientTSEntry 4 } + + jnxTwampClientTSSenderPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TWAMP Test Session Sender Port." + ::= {jnxTwampClientTSEntry 5 } + + jnxTwampClientTSReflectorAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TWAMP Test Session Reflector Address." + ::= {jnxTwampClientTSEntry 6} + + jnxTwampClientTSReflectorPort OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TWAMP Test Session Reflector Port. " + ::= {jnxTwampClientTSEntry 7 } + + +twampNotifications OBJECT IDENTIFIER ::= {jnxTwampNotificationPrefix 1 } + + jnxTwampClientControlConnectionClosed NOTIFICATION-TYPE + OBJECTS { + jnxTwampClientCCName + } + STATUS current + DESCRIPTION + "This trap is generated when all the test iterations configured under the control + connection finish running and control connection is closed." + + ::= {twampNotifications 1 } + jnxTwampClientTestIterationFinished NOTIFICATION-TYPE + OBJECTS { + jnxTwampClientCCName + } + STATUS current + DESCRIPTION + "This trap is generated when one test iteration is finished for all the + test sessions configured under the control connection." + ::= {twampNotifications 2 } + + +END |