path: root/MIBS/junos/JUNIPER-TWAMP-MIB

--
-- Juniper Enterprise Specific MIB: TWAMP MIB
-- 
-- Copyright (c) 2007, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--

JUNIPER-TWAMP-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Integer32
        FROM SNMPv2-SMI              -- RFC2578
    NOTIFICATION-TYPE, OBJECT-IDENTITY,IpAddress
	FROM SNMPv2-SMI
    DateAndTime, TEXTUAL-CONVENTION, DisplayString
        FROM SNMPv2-TC
    CounterBasedGauge64
        FROM HCNUM-TC
    pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex
        FROM DISMAN-PING-MIB
    jnxTwampMibRoot, jnxTwampNotificationPrefix
        FROM JUNIPER-SMI
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB;

jnxTwampMib MODULE-IDENTITY
    LAST-UPDATED "201403010000Z" 
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
            "        Juniper Technical Assistance Center
		     Juniper Networks, Inc.
		     1133 Innovation Way
		     Sunnyvale, CA 94089
		     E-mail: support@juniper.net"

    DESCRIPTION
            "This mib provides data associated with the TWAMP feature" 
    -- revision history
    REVISION "201403010000Z" 
    DESCRIPTION
            "Initial definition."
    ::= { jnxTwampMibRoot 1 }


JnxTwampClientCollectionType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Each TWAMP entry can maintain several collections of probes and
         provide separate calculations over each collection.  The types of
         collections include:

             currentTest       -- the test currently being executed
             lastCompletedTest -- the most recently completed test
             movingAverage     -- the 'n' most recent probes (n is configurable)
             allTests          -- all the probes (since the entry was last
                                  reset).
         
         Objects with this type identify a specific collection."
    SYNTAX INTEGER {  
               currentTest       (1),
               lastCompletedTest (2),
               movingAverage     (3),
               allTests          (4)
           }

JnxTwampClientMeasurementType ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "For each individual probe, several different measurements can be
         made.  These include the following (all measurements are provided
         in units of microseconds):

             roundTripTime -- this is the delay between the the transmission of
                 a probe and the arrival of its response.

             rttJitter -- this is the difference between the current round trip
                 time measurement and the previous one.

             rttInterarrivalJitter -- An estimate of the statistical variance
                 of a packet's interarrival time.  Defined in rfc1889 as:

                   J=J+(|D(i-1,i)|-J)/16

                 where J is the interarrival jitter and D(i-1, i) is the current
                 round trip jitter measurement.

             egress -- this is the delay beween the transmission of a probe and
                 its arrival at its destination.

             egressJitter -- this is the difference between the current egress
                 delay the previous measurement.

             egressInterarrivalJitter -- similar to rttInterarrivalJitter, but
                 applied to egress jitter measurements.

             ingress -- this is the delay between the transmission of a probe
                 response and its arrival at its destination.

             ingressJitter -- this is the difference between the current ingress
                 delay and the previous measurement.

             ingressInterarrivalJitter -- similar to rttInterarrivalJitter, but
                 applied to ingress jitter measurements.
       Note, due to clock synchronization artifacts, many one-way
         jitter measurements & calculations may include signifacant variations,
         in some cases orders of magnitude greater than the round trip times.
         Because of this, one-way jitter measurements will only be performed
         on samples which are less than 10 seconds apart."
    SYNTAX     INTEGER {
                   roundTripTime             (1),
                   rttJitter                 (2),
                   rttInterarrivalJitter     (3),
                   egress                    (4),
                   egressJitter              (5),
                   egressInterarrivalJitter  (6),
                   ingress                   (7),
                   ingressJitter             (8),
                   ingressInterarrivalJitter (9)
               }

JnxTwampClientMeasurementSet ::= TEXTUAL-CONVENTION
    STATUS current
    DESCRIPTION
        "Over each collection of probes, TWAMP calculates statistics for several
         sets of measurements.  These sets include the following:

             roundTripTime    -- the set of round trip delays
             posRttJitter     -- the set of positive round trip jitter
                                 measurements
             negRttJitter     -- the set of negative round trip jitter
                                 measurements
             egress           -- the set of outgoing (source to destination)
                                 one-way delays
             posEgressJitter  -- the set of positive egress jitter measurements
             negEgressJitter  -- the set of negative egress jitter measurements
             ingress          -- the set of incoming (destination to source)
                                 one-way delays
             posIngressJitter -- the set of positive ingress jitter measurements
             negIngressJitter -- the set of negative ingress jitter measurements

        Objects with this type identify a specific set of measurements."
    SYNTAX INTEGER {
               roundTripTime    (1),
               posRttJitter     (2),
               negRttJitter     (3),
               egress           (4),
               posEgressJitter  (5),
               negEgressJitter  (6),
               ingress          (7),
               posIngressJitter (8),
               negIngressJitter (9)
           }

JnxTwampPercentType ::= TEXTUAL-CONVENTION
    DISPLAY-HINT "d-6"
    STATUS current
    DESCRIPTION
        "Displays a percentage as decimal with 6 digits precision."
    SYNTAX     Unsigned32(0..100000000)


jnxTwampClientNode	OBJECT-IDENTITY
    STATUS			current
    DESCRIPTION	
			  "The node contains all the TWAMP client related tables."
::= {jnxTwampMib 1}

jnxTwampRpmIdentity	OBJECT-TYPE
    SYNTAX		INTEGER {
				rpm(1),
				twamp(2)
				}
    MAX-ACCESS		read-only
    STATUS		current
    DESCRIPTION		
	      "This object is added to be binded to the traps. This object simply identifies if 
		its an RPM type of test or a TWAMP type of test."
::= {jnxTwampMib 2}

--
-- Sample Results Table
--
    jnxTwampClientResultsSampleTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF JnxTwampClientResultsSampleEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table provides measurements from the latest individual TWAMP
             probe samples.  Within each sample, the specific measurement type
             is identified by jnxTwampClientResSampleType.  Note, if the latest
             probe was unsuccessful, no measurement types will be available.

             See the definition of JnxTwampClientMeasurementType for details on
             the types of measurements available."
        ::= { jnxTwampClientNode 1 }

    jnxTwampClientResultsSampleEntry OBJECT-TYPE
        SYNTAX      JnxTwampClientResultsSampleEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry provides a specific measurement type for a single
             probe."
        INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSampleType }
        ::= { jnxTwampClientResultsSampleTable 1 }

    JnxTwampClientResultsSampleEntry ::=
        SEQUENCE {
            jnxTwampResSampleType          JnxTwampClientMeasurementType,
            jnxTwampResSampleValue         Integer32,
            jnxTwampResSampleDate          DateAndTime
        }

    jnxTwampResSampleType OBJECT-TYPE
        SYNTAX     JnxTwampClientMeasurementType
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           "This object identifies the specific measurement type returned
            by jnxTwampResSampleValue."
       ::= { jnxTwampClientResultsSampleEntry 1 }

    jnxTwampResSampleValue OBJECT-TYPE
       SYNTAX     Integer32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "This object returns the measurement identified by the corresponding
            jnxTwampResSampleType."
       ::= { jnxTwampClientResultsSampleEntry 2 }

    jnxTwampResSampleDate OBJECT-TYPE
        SYNTAX     DateAndTime
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object provides the date and time of when this measurement
             was obtained."
        ::= { jnxTwampClientResultsSampleEntry 3 }


--
-- Summary Results Table
--
    jnxTwampClientResultsSummaryTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF JnxTwampClientResultsSummaryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table provides a summary of the results for a specific
             TWAMP entry (identified by pingCtlOwnerIndex/pingCtlTestName).
             The scope of the summary is identified by jnxTwampClientResSumCollection."
        ::= { jnxTwampClientNode 2 }

    jnxTwampClientResultsSummaryEntry OBJECT-TYPE
        SYNTAX      JnxTwampClientResultsSummaryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Each entry in the table provides a summary of the TWAMP results
             over a single collection of probes(test session).  For each TWAMP entry, there
             are several collections maintained: the current test, the
             most recently completed test, a configurable number of the most
             recent probes (aka 'moving average'), and a global collection
             representing all the probes.  Each entry in this table summarizes
             the results for one of these collections."
        INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSumCollection }
        ::= { jnxTwampClientResultsSummaryTable 1 }

    JnxTwampClientResultsSummaryEntry ::=
        SEQUENCE {
            jnxTwampResSumCollection               JnxTwampClientCollectionType,
            jnxTwampResSumSent                     Unsigned32,
            jnxTwampResSumReceived                 Unsigned32,
            jnxTwampResSumPercentLost              JnxTwampPercentType,
            jnxTwampResSumDate                     DateAndTime
        }

    jnxTwampResSumCollection OBJECT-TYPE
        SYNTAX      JnxTwampClientCollectionType
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This object identifes the collection of probes over which the
             summary data represented by the other objects in this table
             applies.  Note, if a collection type is not supported or not
             configured, it will not be instantiated in this table."
        ::= { jnxTwampClientResultsSummaryEntry 1 }

    jnxTwampResSumSent OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object provides the number of probes sent within the
             collection identified by jnxTwampResSumCollection."
        ::= { jnxTwampClientResultsSummaryEntry 2 }

    jnxTwampResSumReceived OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object provides the number of probes received within the
             collection identified by jnxTwampResSumCollection."
        ::= { jnxTwampClientResultsSummaryEntry 3 }

    jnxTwampResSumPercentLost OBJECT-TYPE
        SYNTAX     JnxTwampPercentType
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object provides the percentage of probes lost within the
             collection identified by jnxTwampResSumCollection."
        ::= { jnxTwampClientResultsSummaryEntry 4 }

    jnxTwampResSumDate OBJECT-TYPE
        SYNTAX     DateAndTime
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object provides the date and time of when the most recent
             probe within the collection identified by jnxTwampResSumCollection
             was completed."
        ::= { jnxTwampClientResultsSummaryEntry 5 }
---
--Calculated Results Table
--
    jnxTwampClientResultsCalculatedTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF JnxTwampClientResultsCalculatedEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table provides a set of calculated values for each
             TWAMP entry, for each collection of probes maintained within that
             entry, and for each supported measurement set within that
             collection of probes.

             This table will skip over any measurement set for which
             there are 0 samples."
        ::= { jnxTwampClientNode 3 }

    jnxTwampClientResultsCalculatedEntry OBJECT-TYPE
        SYNTAX      JnxTwampClientResultsCalculatedEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            ""
        INDEX { pingCtlOwnerIndex, pingCtlTestName, jnxTwampResSumCollection,
                jnxTwampResCalcSet }
        ::= { jnxTwampClientResultsCalculatedTable 1 }

    JnxTwampClientResultsCalculatedEntry ::=
        SEQUENCE {
            jnxTwampResCalcSet       JnxTwampClientMeasurementSet,
            jnxTwampResCalcSamples   Unsigned32,
            jnxTwampResCalcMin       Unsigned32,
            jnxTwampResCalcMax       Unsigned32,
            jnxTwampResCalcAverage   Unsigned32,
            jnxTwampResCalcPkToPk    Unsigned32,
            jnxTwampResCalcStdDev    Unsigned32,
            jnxTwampResCalcSum       CounterBasedGauge64
        }

    jnxTwampResCalcSet OBJECT-TYPE
        SYNTAX      JnxTwampClientMeasurementSet
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This object identifies the measurement set upon which the
             calculations returned by the other objects in this table are
             based."
        ::= { jnxTwampClientResultsCalculatedEntry 1 }

    jnxTwampResCalcSamples OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The number of samples used in this calculations."
        ::= { jnxTwampClientResultsCalculatedEntry 2 }

    jnxTwampResCalcMin OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The minimum of all the samples in the collection and measurement
             set associated with this row.  Values are provided in units
             of microseconds."
        ::= { jnxTwampClientResultsCalculatedEntry 3 }

    jnxTwampResCalcMax OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The maximum of all the samples in the collection and measurement
             set associated with this row.  Values are provided in units
             of microseconds."
        ::= { jnxTwampClientResultsCalculatedEntry 4 }
    jnxTwampResCalcAverage OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The average of all the samples in the collection and measurement
             set associated with this row.  Values are provided in units
             of microseconds."
        ::= { jnxTwampClientResultsCalculatedEntry 5 }

    jnxTwampResCalcPkToPk OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The difference between the minimum and maximum of all the samples
             in the collection and measurement set associated with this row.
             Values are provided in units of microseconds."
        ::= { jnxTwampClientResultsCalculatedEntry 6 }

    jnxTwampResCalcStdDev OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The standard deviation calculated over all the samples
             in the collection and measurement set associated with this row.
             Values are provided in units of microseconds."
        ::= { jnxTwampClientResultsCalculatedEntry 7 }

    jnxTwampResCalcSum OBJECT-TYPE
        SYNTAX     CounterBasedGauge64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The sum of all the samples in the collection and measurement set
             associated with this row.  Values are provided in units of
             microseconds."
        ::= { jnxTwampClientResultsCalculatedEntry 8 }


--
-- History Sample Table
--
    jnxTwampClientHistorySampleTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF JnxTwampClientHistorySampleEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table provides measurements for individual TWAMP probe samples(test sessions).
             In addition to the last completed sample, a configurable number of
             the most recent samples are available as well.  Within each sample,
             the specific measurement type is identified by
             jnxTwampHistSampleType.  Note, if probe was unsuccessful, no
             measurement types will be available for that history entry.

             See the definition of JnxTwampClientMeasurementType for details on
             of measurements available."
        ::= { jnxTwampClientNode 4 }

    jnxTwampClientHistorySampleEntry OBJECT-TYPE
        SYNTAX      JnxTwampClientHistorySampleEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            ""
        INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,
                jnxTwampHistSampleType }
        ::= { jnxTwampClientHistorySampleTable 1 }

    JnxTwampClientHistorySampleEntry ::=
        SEQUENCE {
            jnxTwampHistSampleType          JnxTwampClientMeasurementType,
            jnxTwampHistSampleValue         Integer32
        }

    jnxTwampHistSampleType OBJECT-TYPE
        SYNTAX     JnxTwampClientMeasurementType
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
           "This object identifies the specific measurement type returned
            by jnxTwampHistSampleValue."
       ::= { jnxTwampClientHistorySampleEntry 1 }

    jnxTwampHistSampleValue OBJECT-TYPE
       SYNTAX     Integer32
       MAX-ACCESS read-only
       STATUS     current
       DESCRIPTION
           "This object returns the measurement identified by the corresponding
            jnxTwampHistSampleType."
       ::= { jnxTwampClientHistorySampleEntry 2 }

--
-- History Summary Table
--
    jnxTwampClientHistorySummaryTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF JnxTwampClientHistorySummaryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table provides historical summary data for each collection
             of probes(test session) within each TWAMP Control Entry, similar to the
             jnxTwampClientResultsSummaryTable.

             In addition to the current summary, this table provides the same
             number of historical entries as the jnxTwampClientHistorySampleTable."
        ::= { jnxTwampClientNode 5 }

    jnxTwampClientHistorySummaryEntry OBJECT-TYPE
        SYNTAX      JnxTwampClientHistorySummaryEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            ""
        INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,
                jnxTwampHistSumCollection }
        ::= { jnxTwampClientHistorySummaryTable 1 }

    JnxTwampClientHistorySummaryEntry ::=
        SEQUENCE {
            jnxTwampHistSumCollection  JnxTwampClientCollectionType,
            jnxTwampHistSumSent        Unsigned32,
            jnxTwampHistSumReceived    Unsigned32,
            jnxTwampHistSumPercentLost JnxTwampPercentType
        }

    jnxTwampHistSumCollection OBJECT-TYPE
        SYNTAX      JnxTwampClientCollectionType
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "Identifies the collection of probes whose results are summarized by
             this row.

             At this time, historical summaries are available only for the
             current test (currentTest(1))."
        ::= { jnxTwampClientHistorySummaryEntry 1 }

    jnxTwampHistSumSent OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object provides the number of probes sent within the
             collection identified by jnxTwampHistSumCollection."
        ::= { jnxTwampClientHistorySummaryEntry 2 }

    jnxTwampHistSumReceived OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object provides the number of probes received within the
             collection identified by jnxTwampHistSumCollection."
        ::= { jnxTwampClientHistorySummaryEntry 3 }

    jnxTwampHistSumPercentLost OBJECT-TYPE
        SYNTAX     JnxTwampPercentType
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "This object provides the percentage of probes lost within the
             collection identified by jnxTwampHistSumCollection."
        ::= { jnxTwampClientHistorySummaryEntry 4 }



--
-- History Calculated Table
--
    jnxTwampClientHistoryCalculatedTable OBJECT-TYPE
        SYNTAX      SEQUENCE OF JnxTwampClientHistoryCalculatedEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            "This table provides a set of calculated values for each
             TWAMP control entry, for each test session maintained within that
             entry, and for each supported calculated type within that
             collection of probes, similar to the jnxTwampClientResultsCalculatedTable.

             In addition to the current summary, this table provides the same
             number of historical entries as the jnxTwampClientHistorySampleTable."
        ::= { jnxTwampClientNode 6 }

    jnxTwampClientHistoryCalculatedEntry OBJECT-TYPE
        SYNTAX      JnxTwampClientHistoryCalculatedEntry
        MAX-ACCESS  not-accessible
        STATUS      current
        DESCRIPTION
            ""
        INDEX { pingCtlOwnerIndex, pingCtlTestName, pingProbeHistoryIndex,
                jnxTwampHistSumCollection, jnxTwampHistCalcSet }
        ::= { jnxTwampClientHistoryCalculatedTable 1 }
    JnxTwampClientHistoryCalculatedEntry ::=
        SEQUENCE {
            jnxTwampHistCalcSet       JnxTwampClientMeasurementSet,
            jnxTwampHistCalcSamples   Unsigned32,
            jnxTwampHistCalcMin       Unsigned32,
            jnxTwampHistCalcMax       Unsigned32,
            jnxTwampHistCalcAverage   Unsigned32,
            jnxTwampHistCalcPkToPk    Unsigned32,
            jnxTwampHistCalcStdDev    Unsigned32,
            jnxTwampHistCalcSum       CounterBasedGauge64
        }

    jnxTwampHistCalcSet OBJECT-TYPE
       SYNTAX     JnxTwampClientMeasurementSet
       MAX-ACCESS  not-accessible
       STATUS      current
       DESCRIPTION
            "This object identifies the measurement set upon which the
             calculations returned by the other objects in this table are
             based."
       ::= { jnxTwampClientHistoryCalculatedEntry 1 }

    jnxTwampHistCalcSamples OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The number of samples used in this calculations."
        ::= { jnxTwampClientHistoryCalculatedEntry 2 }

    jnxTwampHistCalcMin OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The minimum of all the samples in the collection and measurement
             set associated with this row.  Values are provided in units
             of microseconds."
        ::= { jnxTwampClientHistoryCalculatedEntry 3 }
    jnxTwampHistCalcMax OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The maximum of all the samples in the collection and measurement
             set associated with this row.  Values are provided in units
             of microseconds."
        ::= { jnxTwampClientHistoryCalculatedEntry 4 }

    jnxTwampHistCalcAverage OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The average of all the samples in the collection and measurement
             set associated with this row.  Values are provided in units
             of microseconds."
        ::= { jnxTwampClientHistoryCalculatedEntry 5 }

    jnxTwampHistCalcPkToPk OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The difference between the minimum and maximum of all the samples
             in the collection and measurement set associated with this row.
             Values are provided in units of microseconds."
        ::= { jnxTwampClientHistoryCalculatedEntry 6 }

    jnxTwampHistCalcStdDev OBJECT-TYPE
        SYNTAX     Unsigned32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The standard deviation calculated over all the samples
             in the collection and measurement set associated with this row.
             Values are provided in units of microseconds."
        ::= { jnxTwampClientHistoryCalculatedEntry 7 }

    jnxTwampHistCalcSum OBJECT-TYPE
        SYNTAX     CounterBasedGauge64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
            "The sum of all the samples in the collection and measurement set
             associated with this row.  Values are provided in units of
             microseconds."
        ::= { jnxTwampClientHistoryCalculatedEntry 8 }

-- Control Sessions Table --
    jnxTwampClientControlConnectionTable OBJECT-TYPE
        SYNTAX       SEQUENCE OF JnxTwampClientCCEntry
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
                "Table of Client Sessions."
        ::= { jnxTwampClientNode 7 }

    jnxTwampClientCCEntry OBJECT-TYPE
        SYNTAX       JnxTwampClientCCEntry
        MAX-ACCESS   not-accessible
        STATUS       current
        DESCRIPTION
                "TWAMP Client Session characteristics."
        INDEX { jnxTwampClientControlConnectionID }
        ::= { jnxTwampClientControlConnectionTable 1 }


    JnxTwampClientCCEntry ::= 
        SEQUENCE {
            jnxTwampClientControlConnectionID  SnmpAdminString,
            jnxTwampClientCCName      DisplayString,
            jnxTwampClientCCStatus    INTEGER(0..65535),
            jnxTwampClientServerAddress    IpAddress,
            jnxTwampClientServerPort  INTEGER(0..65535),
            jnxTwampClientTSConfiguredCount INTEGER(0..65535),
            jnxTwampClientTSActiveCount        INTEGER(0..65535),
            jnxTwampClientAuthMode     INTEGER(0..65535)
        } 

    jnxTwampClientControlConnectionID OBJECT-TYPE
        SYNTAX              SnmpAdminString (SIZE(0..32))
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION
            "TWAMP Client control session ID."
            ::= { jnxTwampClientCCEntry 1 }

    jnxTwampClientCCName OBJECT-TYPE
        SYNTAX      DisplayString
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
             "Text string containing the session's unique name."
            ::= { jnxTwampClientCCEntry 2 }

    jnxTwampClientCCStatus OBJECT-TYPE
        SYNTAX         INTEGER {
                        active(1),
                        stopped(2)
                    }
        MAX-ACCESS  read-only
        STATUS      current
        DESCRIPTION
                "If the control session is active, this would return 1.
                 If the control session does not have any currently
                 running test sessions and is not active, this would return 2."
            ::= { jnxTwampClientCCEntry 3 }

    jnxTwampClientServerAddress OBJECT-TYPE
        SYNTAX             IpAddress
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
                "Server IP address for TWAMP TCP control session."
            ::= { jnxTwampClientCCEntry 4 }
    jnxTwampClientServerPort     OBJECT-TYPE
        SYNTAX             INTEGER (0..65535)
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
                "Destination port for TWAMP TCP control connection."
            ::= { jnxTwampClientCCEntry 5 }

    jnxTwampClientTSConfiguredCount OBJECT-TYPE
        SYNTAX             INTEGER (0..65535)
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
               "Number test sessions configured."
            ::= { jnxTwampClientCCEntry 6 }

    jnxTwampClientTSActiveCount     OBJECT-TYPE
        SYNTAX             INTEGER(0..65535)
        MAX-ACCESS         read-only
        STATUS             current
        DESCRIPTION
                "Number of test sessions currently running."
            ::= { jnxTwampClientCCEntry 7 }

    jnxTwampClientAuthMode    OBJECT-TYPE
        SYNTAX             INTEGER {
                            none(1),
                            authenticated(2),
                            encrypted(3),
                            controlOnlyEncrypted(4)
                         }
        MAX-ACCESS           read-only
        STATUS               current
        DESCRIPTION
                " Authenticated mode for the control session."
            ::= {jnxTwampClientCCEntry 8 }

--- Table containing entries for all test sessions 
 jnxTwampClientTestSessionsTable        OBJECT-TYPE
    SYNTAX              SEQUENCE OF JnxTwampClientTSEntry
    MAX-ACCESS          not-accessible
    STATUS              current
    DESCRIPTION
              "Table of Test Sessions."
     ::= {jnxTwampClientNode 8}

 jnxTwampClientTSEntry          OBJECT-TYPE
    SYNTAX              JnxTwampClientTSEntry
    MAX-ACCESS          not-accessible
    STATUS              current
    DESCRIPTION
              "TWAMP Test Session characteristics."
    INDEX {pingCtlOwnerIndex, jnxTwampClientTestSessionID }
    ::= { jnxTwampClientTestSessionsTable 1 }

 JnxTwampClientTSEntry ::= SEQUENCE {
        jnxTwampClientTestSessionID     SnmpAdminString,
        jnxTwampClientTSName            DisplayString,
        jnxTwampClientTSStatus          INTEGER,
        jnxTwampClientTSSenderAddress   IpAddress,
        jnxTwampClientTSSenderPort      INTEGER,
        jnxTwampClientTSReflectorAddress IpAddress,
        jnxTwampClientTSReflectorPort   INTEGER
  }

 jnxTwampClientTestSessionID    OBJECT-TYPE
    SYNTAX              SnmpAdminString (SIZE(0..32))
    MAX-ACCESS          not-accessible
    STATUS              current
    DESCRIPTION
              "Test Session ID."
        ::= { jnxTwampClientTSEntry 1 }


 jnxTwampClientTSName           OBJECT-TYPE
    SYNTAX              DisplayString
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
              "TWAMP Test Session Name."
        ::= {jnxTwampClientTSEntry 2 }

 jnxTwampClientTSStatus         OBJECT-TYPE
    SYNTAX              INTEGER {
                                active (1),
                                stopped (2)
                        }
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
              "TWAMP Test Session status."
        ::= {jnxTwampClientTSEntry 3 }
 jnxTwampClientTSSenderAddress  OBJECT-TYPE
    SYNTAX              IpAddress
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
              "Twamp Test Sender Address."
        ::= {jnxTwampClientTSEntry 4 }

 jnxTwampClientTSSenderPort     OBJECT-TYPE
    SYNTAX              INTEGER (0..65535)
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
              "TWAMP Test Session Sender Port."
        ::= {jnxTwampClientTSEntry 5 }

 jnxTwampClientTSReflectorAddress OBJECT-TYPE
    SYNTAX              IpAddress
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
              "TWAMP Test Session Reflector Address."
        ::= {jnxTwampClientTSEntry 6}

 jnxTwampClientTSReflectorPort  OBJECT-TYPE
    SYNTAX              INTEGER (0..65535)
    MAX-ACCESS          read-only
    STATUS              current
    DESCRIPTION
              "TWAMP Test Session Reflector Port. "
        ::= {jnxTwampClientTSEntry 7 }


twampNotifications      OBJECT IDENTIFIER ::= {jnxTwampNotificationPrefix 1 }

 jnxTwampClientControlConnectionClosed  NOTIFICATION-TYPE
    OBJECTS {
                jnxTwampClientCCName
        }
    STATUS              current
    DESCRIPTION
              "This trap is generated when all the test iterations configured under the control
                connection finish running and control connection is closed."

        ::= {twampNotifications 1 }
 jnxTwampClientTestIterationFinished    NOTIFICATION-TYPE
    OBJECTS {
                jnxTwampClientCCName
        }
    STATUS              current
    DESCRIPTION
              "This trap is generated when one test iteration is finished for all the
                test sessions configured under the control connection."
        ::= {twampNotifications 2 }


END