diff options
Diffstat (limited to 'MIBS/radlan/RADLAN-IPv6')
| -rw-r--r-- | MIBS/radlan/RADLAN-IPv6 | 1949 |
1 files changed, 1949 insertions, 0 deletions
diff --git a/MIBS/radlan/RADLAN-IPv6 b/MIBS/radlan/RADLAN-IPv6 new file mode 100644 index 0000000..a4d3811 --- /dev/null +++ b/MIBS/radlan/RADLAN-IPv6 @@ -0,0 +1,1949 @@ +RADLAN-IPv6 DEFINITIONS ::= BEGIN
+
+-- Title: RADLAN IPv6 Private Extension
+-- Version: 7.60.00.00
+-- Date: 25 Sep 2011
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE,
+ Integer32, Counter32, IpAddress,
+ mib-2, Unsigned32, Counter64,
+ zeroDotZero, Gauge32 FROM SNMPv2-SMI
+ TimeInterval, TruthValue, DisplayString, RowStatus
+ FROM SNMPv2-TC
+ rnd FROM RADLAN-MIB
+ ipSpec FROM RADLAN-IP
+ ipAddressEntry, ipv6InterfaceEntry FROM IP-MIB
+ ipNetToPhysicalEntry FROM IP-MIB
+ inetCidrRouteEntry FROM IP-FORWARD-MIB
+ InterfaceIndex, InterfaceIndexOrZero
+ FROM IF-MIB
+ InetAddressPrefixLength, InetAddressType, InetAddress,
+ InetAutonomousSystemNumber
+ FROM INET-ADDRESS-MIB
+ ipv6RouterAdvertEntry FROM IP-MIB
+ IANAipRouteProtocol FROM IANA-RTPROTO-MIB
+ IANAtunnelType FROM IANAifType-MIB;
+
+
+rlIPv6 MODULE-IDENTITY
+ LAST-UPDATED "200809250000Z"
+ ORGANIZATION "Marvell Semiconductor, Inc."
+ CONTACT-INFO
+ "www.marvell.com"
+ DESCRIPTION
+ "The private MIB module definition for IPv6 MIB."
+ REVISION "200809250000Z"
+ DESCRIPTION
+ "Initial version of this MIB."
+ ::= { rnd 129 }
+
+
+--- IpAddressTable augmentation
+
+rlIpAddressTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlIpAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is parallel to ipAddressTable, and is used to
+ add/delete IPv6 entries to/from that table. It contains
+ private objects."
+ ::= { ipSpec 19 }
+
+rlIpAddressEntry OBJECT-TYPE
+ SYNTAX RlIpAddressEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An address mapping for a particular interface."
+ AUGMENTS { ipAddressEntry }
+ ::= { rlIpAddressTable 1 }
+
+RlIpAddressEntry ::= SEQUENCE {
+ rlIpAddressPrefixLength InetAddressPrefixLength,
+ rlIpAddressType INTEGER
+ }
+
+rlIpAddressPrefixLength OBJECT-TYPE
+ SYNTAX InetAddressPrefixLength
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The prefix length of this address."
+ DEFVAL { 64 }
+ ::= { rlIpAddressEntry 1 }
+
+rlIpAddressType OBJECT-TYPE
+ SYNTAX INTEGER {
+ unicast(1),
+ anycast(2),
+ broadcast(3),
+ multicast(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Extend standard field ipAddressType to multicast"
+ DEFVAL { unicast }
+ ::= { rlIpAddressEntry 2 }
+
+--- ipv6InterfaceTable augmentation
+
+rlipv6InterfaceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF Rlipv6InterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is parallel to ipv6InterfaceTable, and is used to
+ configure additional interface parameters."
+ ::= { ipSpec 20 }
+
+rlipv6InterfaceEntry OBJECT-TYPE
+ SYNTAX Rlipv6InterfaceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Additional configuration parameters for a particular interface."
+ AUGMENTS { ipv6InterfaceEntry }
+ ::= { rlipv6InterfaceTable 1 }
+
+Rlipv6InterfaceEntry ::= SEQUENCE {
+ rlipv6InterfaceNdDadAttemps INTEGER,
+ rlipv6InterfaceAutoconfigEnable INTEGER,
+ rlipv6InterfaceIcmpUnreachSendEnable INTEGER,
+ rlipv6InterfaceLinkMTU Unsigned32,
+ rlipv6InterfaceMLDVersion Unsigned32,
+ rlipv6InterfaceRetransmitTime Unsigned32,
+ rlipv6InterfaceIcmpRedirectSendEnable INTEGER
+ }
+
+rlipv6InterfaceNdDadAttemps OBJECT-TYPE
+ SYNTAX INTEGER (0..600)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "ND Duplicated address detection number of attempts."
+ DEFVAL { 0 }
+ ::= { rlipv6InterfaceEntry 1 }
+
+rlipv6InterfaceAutoconfigEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enables or disables Stateless Address Auto configuration
+ on specific interface."
+ DEFVAL { enable }
+ ::= { rlipv6InterfaceEntry 2 }
+
+rlipv6InterfaceIcmpUnreachSendEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enables or disables sending of ICMP Destination Unreachable
+ Error on specific interface."
+ DEFVAL { enable }
+ ::= { rlipv6InterfaceEntry 3 }
+
+rlipv6InterfaceLinkMTU OBJECT-TYPE
+ SYNTAX Unsigned32 (1280..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum transmission unit (MTU) size of IPv6 packets
+ sent on an interface in bytes."
+ DEFVAL { 1500 }
+ ::= { rlipv6InterfaceEntry 4 }
+
+rlipv6InterfaceMLDVersion OBJECT-TYPE
+ SYNTAX Unsigned32 (1..2)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Set version of MLD protocol on specific interface."
+ DEFVAL { 2 }
+ ::= { rlipv6InterfaceEntry 5 }
+
+rlipv6InterfaceRetransmitTime OBJECT-TYPE
+ SYNTAX Unsigned32 (0 | 1000..3600000)
+ UNITS "milliseconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This value will be included in all IPv6 router advertisements sent
+ out this interface. Very short intervals are not recommended in
+ normal IPv6 operation. When a nondefault value is configured, the
+ configured time is both advertised and used by the router itself.
+ When value 0 is configured, 0 seconds (unspecified) advertised in
+ router advertisements and the value 1000 milliseconds is used for
+ the neighbor discovery activity of the router itself."
+ DEFVAL { 0 }
+ ::= { rlipv6InterfaceEntry 6 }
+
+rlipv6InterfaceIcmpRedirectSendEnable OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Enables or disables sending of ICMP IPv6 redirect messages to
+ re-send a packet through the same interface on which the packet was
+ received."
+ DEFVAL { enable }
+ ::= { rlipv6InterfaceEntry 7 }
+
+--- inetCidrRoutetable augmentation
+
+rlinetCidrRouteTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlinetCidrRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is parallel to inetCidrRouteTable, and is used to
+ configure or display additional route parameters."
+ ::= { ipSpec 21 }
+
+rlinetCidrRouteEntry OBJECT-TYPE
+ SYNTAX RlinetCidrRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Additional parameters for a particular route."
+ AUGMENTS { inetCidrRouteEntry }
+ ::= { rlinetCidrRouteTable 1 }
+
+RlinetCidrRouteEntry ::= SEQUENCE {
+ rlinetCidrRouteLifetime Unsigned32,
+ rlinetCidrRouteInfo INTEGER
+ }
+
+rlinetCidrRouteLifetime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remaining length of time, in seconds, that this route
+ will continue to be valid, i.e., time until deprecation.
+ A value of 4,294,967,295 represents infinity."
+ DEFVAL { 4294967295 }
+ ::= { rlinetCidrRouteEntry 1 }
+
+rlinetCidrRouteInfo OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ ospfIntraArea(1),
+ ospfInterArea(2),
+ ospfExternalType1(3),
+ ospfExternalType2(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A reference to MIB definitions specific to the particular routing
+ protocol which is responsible for this route, as determined by the
+ value specified in the route's inetCidrRouteProto value."
+ DEFVAL { none }
+ ::= { rlinetCidrRouteEntry 2 }
+
+
+--- ipNetToPhysicalTable augmentation
+
+rlipNetToPhysicalTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlipNetToPhysicalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is parallel to ipNetToPhysicalTable, and is used to
+ configure or display additional neighbor parameters."
+ ::= { ipSpec 22 }
+
+rlipNetToPhysicalEntry OBJECT-TYPE
+ SYNTAX RlipNetToPhysicalEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Additional parameters for a neighbor"
+ AUGMENTS { ipNetToPhysicalEntry }
+ ::= { rlipNetToPhysicalTable 1 }
+
+RlipNetToPhysicalEntry ::= SEQUENCE {
+ rlipNetToPhysicalIsRouter TruthValue,
+ rlipNetToPhysicalReachableConfirmed Unsigned32
+ }
+
+rlipNetToPhysicalIsRouter OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object has the value 'true(1)', if the neighbor
+ is router; otherwise, the value is 'false(2)'."
+ ::= { rlipNetToPhysicalEntry 1 }
+
+rlipNetToPhysicalReachableConfirmed OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Time (in seconds) since the address was confirmed to be reachable.
+ Only, relevant for dynamic entries."
+ ::= { rlipNetToPhysicalEntry 2 }
+
+
+--- ICMPv6 Rate Limiting
+
+rlipv6IcmpErrorRatelimitInterval OBJECT-TYPE
+ SYNTAX TimeInterval
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The time interval between tokens being placed in the bucket,
+ each token represents a single ICMP error message.
+ The interval measured in milliseconds."
+ DEFVAL { 100 }
+ ::= { rlIPv6 1 }
+
+rlipv6IcmpErrorRatelimitBucketSize OBJECT-TYPE
+ SYNTAX INTEGER(1..200)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The maximum number of tokens stored in the bucket,
+ each token represents a single ICMP error message."
+ DEFVAL { 10 }
+ ::= { rlIPv6 2 }
+
+
+--- IPv6 Link Local Default Zone
+
+rlipv6LLDefaultZone OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The interface which would be used as the egress interface
+ for packets sent without a specified IPv6Z interface identifier
+ or with the default '0' identifier. Zero value means no default
+ interface specified."
+ DEFVAL { 0 }
+ ::= { rlIPv6 3 }
+
+--- rlIpv6GeneralPrefixTable
+
+rlIpv6GeneralPrefixTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlIpv6GeneralPrefixEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines general prefix description,
+ based on which a number of longer, more specific, prefixes can
+ be defined."
+ ::= { rlIPv6 4 }
+
+rlIpv6GeneralPrefixEntry OBJECT-TYPE
+ SYNTAX RlIpv6GeneralPrefixEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Single entry in general prefix table."
+ INDEX {rlIpv6GeneralPrefixName}
+ ::= { rlIpv6GeneralPrefixTable 1 }
+
+RlIpv6GeneralPrefixEntry ::= SEQUENCE {
+ rlIpv6GeneralPrefixName DisplayString,
+ rlIpv6GeneralPrefixInetAddrType InetAddressType,
+ rlIpv6GeneralPrefixInetAddr InetAddress,
+ rlIpv6GeneralPrefixInetAddrPrefixLength InetAddressPrefixLength,
+ rlIpv6GeneralPrefixInterfaceId Unsigned32,
+ rlIpv6GeneralPrefixRowStatus RowStatus
+ }
+
+rlIpv6GeneralPrefixName OBJECT-TYPE
+ SYNTAX DisplayString
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The name assigned to the prefix."
+ ::= { rlIpv6GeneralPrefixEntry 1 }
+
+rlIpv6GeneralPrefixInetAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Prefix inet address type. Has to be IPv6."
+ ::= { rlIpv6GeneralPrefixEntry 2 }
+
+rlIpv6GeneralPrefixInetAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The IPv6 network assigned to the general prefix.
+ This argument must be in the form documented in RFC4293
+ where the address is specified in hexadecimal using 16-bit values
+ between colons."
+ ::= { rlIpv6GeneralPrefixEntry 3 }
+
+rlIpv6GeneralPrefixInetAddrPrefixLength OBJECT-TYPE
+ SYNTAX InetAddressPrefixLength
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of leading one bits that form the
+ mask to be logical-ANDed with the inet address
+ before being compared to the value in the
+ rlIpv6GeneralPrefixInetAddr field."
+ ::= { rlIpv6GeneralPrefixEntry 4 }
+
+rlIpv6GeneralPrefixInterfaceId OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Interface id to use when creating prefix based on point-to-point interface."
+ ::= { rlIpv6GeneralPrefixEntry 5 }
+
+rlIpv6GeneralPrefixRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Row status."
+ ::= { rlIpv6GeneralPrefixEntry 6 }
+
+
+--- IPv6 maximum number of hops
+
+rlipv6MaximumHopsNumber OBJECT-TYPE
+ SYNTAX INTEGER (1..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Maximum number of hops used in router advertisements and all IPv6 packets that
+ are originated by the router."
+ DEFVAL { 64 }
+ ::= { rlIPv6 5 }
+
+--- rlIpv6RouterAdvertPrefixTable
+
+rlIpv6RouterAdvertPrefixTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlIpv6RouterAdvertPrefixEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines IPv6 prefixes which are included in IPv6 Neighbor
+ Discovery (ND) router advertisements."
+ ::= { rlIPv6 6 }
+
+rlIpv6RouterAdvertPrefixEntry OBJECT-TYPE
+ SYNTAX RlIpv6RouterAdvertPrefixEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Single entry in Neighbor Discovery Prefix table."
+ INDEX {rlIpv6RouterAdvertPrefixIfIndex,
+ rlIpv6RouterAdvertPrefixIsDefault,
+ rlIpv6RouterAdvertPrefixInetAddrType,
+ rlIpv6RouterAdvertPrefixInetAddr,
+ rlIpv6RouterAdvertPrefixInetAddrPrefixLength}
+ ::= { rlIpv6RouterAdvertPrefixTable 1 }
+
+RlIpv6RouterAdvertPrefixEntry ::= SEQUENCE {
+ rlIpv6RouterAdvertPrefixIfIndex InterfaceIndex,
+ rlIpv6RouterAdvertPrefixIsDefault TruthValue,
+ rlIpv6RouterAdvertPrefixInetAddrType InetAddressType,
+ rlIpv6RouterAdvertPrefixInetAddr InetAddress,
+ rlIpv6RouterAdvertPrefixInetAddrPrefixLength InetAddressPrefixLength,
+ rlIpv6RouterAdvertPrefixAdminStatus INTEGER,
+ rlIpv6RouterAdvertPrefixAdvertise TruthValue,
+ rlIpv6RouterAdvertPrefixOnLinkStatus INTEGER,
+ rlIpv6RouterAdvertPrefixAutonomousFlag TruthValue,
+ rlIpv6RouterAdvertPrefixAdvPreferredLifetime Unsigned32,
+ rlIpv6RouterAdvertPrefixAdvValidLifetime Unsigned32,
+ rlIpv6RouterAdvertPrefixRowStatus RowStatus
+ }
+
+rlIpv6RouterAdvertPrefixIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The index value that uniquely identifies the interface on
+ which this prefix is configured. The interface identified
+ by a particular value of this index is the same interface as
+ identified by the same value of the IF-MIB's ifIndex."
+ ::= { rlIpv6RouterAdvertPrefixEntry 1 }
+
+rlIpv6RouterAdvertPrefixIsDefault OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates whether this object belongs to 'default' entry.
+ Default entry contains specifics about advertising prefixes which
+ were created from local ipv6 addresses."
+ ::= { rlIpv6RouterAdvertPrefixEntry 2 }
+
+rlIpv6RouterAdvertPrefixInetAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Prefix inet address type. Has to be IPv6."
+ ::= { rlIpv6RouterAdvertPrefixEntry 3 }
+
+rlIpv6RouterAdvertPrefixInetAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IPv6 network prefix to include in router advertisements.
+ This argument must be in the form documented in RFC4293 where
+ the address is specified in hexadecimal using 16-bit values between
+ colons."
+ ::= { rlIpv6RouterAdvertPrefixEntry 4 }
+
+rlIpv6RouterAdvertPrefixInetAddrPrefixLength OBJECT-TYPE
+ SYNTAX InetAddressPrefixLength
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The length of the IPv6 prefix. A decimal value that indicates
+ how many of the high-order contiguous bits of the address comprise
+ the prefix (the network portion of the address)."
+ ::= { rlIpv6RouterAdvertPrefixEntry 5 }
+
+rlIpv6RouterAdvertPrefixAdminStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ enable(1),
+ disable(2)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Admin status of the entry. Relevant only for default entry."
+ DEFVAL { enable }
+ ::= { rlIpv6RouterAdvertPrefixEntry 6 }
+
+rlIpv6RouterAdvertPrefixAdvertise OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Whether the prefix is included in router advertisements."
+ DEFVAL { true }
+ ::= { rlIpv6RouterAdvertPrefixEntry 7 }
+
+rlIpv6RouterAdvertPrefixOnLinkStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ onlink (1), -- connected prefix
+ not-onlink (2), -- connected state of the prefix is not specified
+ off-link (3) -- not connected prefix
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If object has the value 'onlink(1)', this prefix is confidered as on-link.
+ This prefix will be advertised with the L-bit set and will be present
+ in the Routing Table.
+ If object has the value 'not-onlink(2)', this prefix will be advertised
+ with the L-bit clear, but connected state of the prefix will not be changed.
+ If object has the value 'offlink(3)', this prefix is confidered as on-link.
+ This prefix will be advertised with the L-bit clear, and will be
+ not present in the Routing Table."
+ DEFVAL { onlink }
+ ::= { rlIpv6RouterAdvertPrefixEntry 8 }
+
+rlIpv6RouterAdvertPrefixAutonomousFlag OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "If object has the value 'true(1)', this prefix indicates to hosts on
+ the local link that the specified prefix can be used for IPv6
+ autoconfiguration. The prefix will be advertised with the A-bit set."
+ DEFVAL { true }
+ ::= { rlIpv6RouterAdvertPrefixEntry 9 }
+
+rlIpv6RouterAdvertPrefixAdvPreferredLifetime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The amount of time (in seconds) that the specified IPv6 prefix is
+ advertised as being preferred."
+ DEFVAL { 604800 }
+ ::= { rlIpv6RouterAdvertPrefixEntry 10 }
+
+rlIpv6RouterAdvertPrefixAdvValidLifetime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The amount of time (in seconds) that the specified IPv6 prefix is
+ advertised as being valid."
+ DEFVAL { 2592000 }
+ ::= { rlIpv6RouterAdvertPrefixEntry 11 }
+
+rlIpv6RouterAdvertPrefixRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Row status."
+ ::= { rlIpv6RouterAdvertPrefixEntry 12 }
+
+
+--- ipv6RouterAdvertTable augmentation
+
+rlIpv6RouterAdvertTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlIpv6RouterAdvertEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table is parallel to inetCidrRouteTable, and is used to
+ configure or display additional route parameters."
+ ::= { rlIPv6 7 }
+
+rlIpv6RouterAdvertEntry OBJECT-TYPE
+ SYNTAX RlIpv6RouterAdvertEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Additional parameters for a particular route."
+ AUGMENTS { ipv6RouterAdvertEntry }
+ ::= { rlIpv6RouterAdvertTable 1 }
+
+RlIpv6RouterAdvertEntry ::= SEQUENCE {
+ rlIpv6RouterAdvertAdvIntervalOption TruthValue,
+ rlIpv6RouterAdvertRouterPreference INTEGER,
+ rlIpv6RouterAdvertIsCurHopLimitUserConfigured TruthValue
+ }
+
+rlIpv6RouterAdvertAdvIntervalOption OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates to a visiting mobile node the interval at which that node
+ may expect to receive RAs. The node may use this information in its
+ movement detection algorithm."
+ DEFVAL { false }
+ ::= { rlIpv6RouterAdvertEntry 1 }
+
+rlIpv6RouterAdvertRouterPreference OBJECT-TYPE
+ SYNTAX INTEGER {
+ low(1),
+ medium(2),
+ high(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Configures a default router preference (DRP) for the router on a specific interface."
+ DEFVAL { medium }
+ ::= { rlIpv6RouterAdvertEntry 2 }
+
+rlIpv6RouterAdvertIsCurHopLimitUserConfigured OBJECT-TYPE
+ SYNTAX TruthValue
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Indicates that hop limit value used in router advertisement is
+ an user configured value and not necessarily value that is used by
+ router itself."
+ DEFVAL { false }
+ ::= { rlIpv6RouterAdvertEntry 3 }
+
+--- Clear IPv6 routes
+
+rlipv6InetCidrTableClear OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "This scalar indicates to clear all ipv6 routes from inetCidrTable."
+ ::= { rlIPv6 8 }
+
+
+--- rlIpv6PathMtuTable
+
+rlIpv6PathMtuTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlIpv6PathMtuEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table used to represent all Path MTU changes to specific destination
+ received from 'packet-too-big' messages."
+ ::= { rlIPv6 9 }
+
+rlIpv6PathMtuEntry OBJECT-TYPE
+ SYNTAX RlIpv6PathMtuEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Single entry in Path MTU table."
+ INDEX {rlIpv6PathMtuEntryInetDestAddrType,
+ rlIpv6PathMtuEntryInetDestAddr}
+ ::= { rlIpv6PathMtuTable 1 }
+
+RlIpv6PathMtuEntry ::= SEQUENCE {
+ rlIpv6PathMtuEntryInetDestAddrType InetAddressType,
+ rlIpv6PathMtuEntryInetDestAddr InetAddress,
+ rlIpv6PathMtuEntryMtu Unsigned32,
+ rlIpv6PathMtuEntryAge Unsigned32
+ }
+
+rlIpv6PathMtuEntryInetDestAddrType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Prefix inet address type. Has to be IPv6."
+ ::= { rlIpv6PathMtuEntry 1 }
+
+rlIpv6PathMtuEntryInetDestAddr OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The IPv6 destination address for which packet-too-big message
+ was received.
+ This argument must be in the form documented in RFC4293
+ where the address is specified in hexadecimal using 16-bit values
+ between colons."
+ ::= { rlIpv6PathMtuEntry 2 }
+
+rlIpv6PathMtuEntryMtu OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The MTU value that was received in packet-too-bug message for
+ specific destination."
+ ::= { rlIpv6PathMtuEntry 3 }
+
+rlIpv6PathMtuEntryAge OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This entry's age (seconds)"
+ ::= { rlIpv6PathMtuEntry 4 }
+
+
+
+--- Inet IP Static Route Table
+
+
+rlInetStaticRouteTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlInetStaticRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entity's static (user configured) Inet Routing table.
+ Entries are MAX-ACCESSible even if not used for forwarding "
+ ::= { ipSpec 28 }
+
+
+rlInetStaticRouteEntry OBJECT-TYPE
+ SYNTAX RlInetStaticRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A particular Static(user configured) route to a particular destination."
+ INDEX {
+ rlInetStaticRouteDestType,
+ rlInetStaticRouteDest,
+ rlInetStaticRoutePfxLen,
+ rlInetStaticRouteNextHopType,
+ rlInetStaticRouteNextHop,
+ rlInetStaticRouteIfIndex
+ }
+ ::= { rlInetStaticRouteTable 1 }
+
+
+RlInetStaticRouteEntry ::= SEQUENCE {
+ rlInetStaticRouteDestType InetAddressType,
+ rlInetStaticRouteDest InetAddress,
+ rlInetStaticRoutePfxLen InetAddressPrefixLength,
+ rlInetStaticRouteNextHopType InetAddressType,
+ rlInetStaticRouteNextHop InetAddress,
+ rlInetStaticRouteIfIndex InterfaceIndexOrZero,
+ rlInetStaticRoutePathCost Unsigned32,
+ rlInetStaticRouteType INTEGER,
+ rlInetStaticRouteOwner INTEGER,
+ rlInetStaticRouteRowStatus RowStatus,
+ rlInetStaticRouteForwardingStatus INTEGER
+ }
+
+
+rlInetStaticRouteDestType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the address used as the destination
+ internetwork address or subnet address."
+ ::= { rlInetStaticRouteEntry 1 }
+
+
+rlInetStaticRouteDest OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Destination internetwork address or subnet address. The
+ destination prefix length is applied to this value, and to a
+ particular destination address, to determine whether the route
+ applies to the particular address.
+ If the prefix length is L, then applying the length to an address
+ means taking the first L bits of the address."
+ ::= { rlInetStaticRouteEntry 2 }
+
+
+rlInetStaticRoutePfxLen OBJECT-TYPE
+ SYNTAX InetAddressPrefixLength
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of leading one bits that form the
+ mask to be logical-ANDed with the destination address
+ before being compared to the value in the
+ rlInetStaticRouteDest field."
+ ::= { rlInetStaticRouteEntry 3 }
+
+
+rlInetStaticRouteNextHopType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the address used as the next-hop address
+ for this route."
+ ::= { rlInetStaticRouteEntry 4 }
+
+
+rlInetStaticRouteNextHop OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The next-hop IP address, if any.
+ If rlInetStaticRouteAction is 'forward', there may or may not be
+ a next-hop IP address.
+ A next-hop IP address is not required if an output interface
+ index is specified (in other words, if rlInetStaticRouteIfIndex is
+ non-zero).
+ If rlInetStaticRouteAction is not 'forward', there is no next-hop
+ IP address.
+ If there is no next-hop IP address, the rlInetStaticRouteNextHop
+ object is set to all zeroes."
+ ::= { rlInetStaticRouteEntry 5 }
+
+
+rlInetStaticRouteIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ifIndex value that identifies the local interface
+ through which the next hop of this route should be
+ reached. A value of 0 is valid and represents the
+ scenario where no interface is specified."
+ DEFVAL { 0 }
+ ::= { rlInetStaticRouteEntry 6 }
+
+
+rlInetStaticRoutePathCost OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Path cost for this static route."
+ DEFVAL { 1 }
+ ::= { rlInetStaticRouteEntry 7 }
+
+
+rlInetStaticRouteType OBJECT-TYPE
+ SYNTAX INTEGER {
+ reject (2), -- route that discards traffic and
+ -- returns ICMP notification
+ local (3), -- local interface
+ remote (4), -- remote destination
+ blackhole(5), -- route that discards traffic
+ -- silently
+ nd (6) -- route that is configred through
+ -- neighbor discovery (relevant only for icmp owner)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Same as inetCidrRouteType MIB (excluded 'other' route type)"
+ DEFVAL { remote }
+ ::= { rlInetStaticRouteEntry 8 }
+
+
+rlInetStaticRouteOwner OBJECT-TYPE
+ SYNTAX INTEGER {
+ static (1),
+ dhcp (2),
+ default (3),
+ icmp (4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Static - The route is configured over Static IP.
+ This route is written to configuration files.
+ Dhcp - The route is Configured by DHCP
+ (received as part of DHCP configuration)
+ This route IS NOT written to configuration files
+ Default - The route is Configured by default system config
+ exists till any other configuration is applied.
+ Icmp - The route is Configured by ICMP protocol either by
+ router advertisements or to be advertised in router
+ advertisements ."
+ ::= { rlInetStaticRouteEntry 9 }
+
+
+rlInetStaticRouteRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The row status variable, used according to row
+ installation and removal conventions.
+ A row entry cannot be modified when the status is
+ marked as active(1)."
+ ::= { rlInetStaticRouteEntry 10 }
+
+rlInetStaticRouteForwardingStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ active (1),
+ inactive (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "active - An indication that the route has implication on routing
+ inactive - the route is a backup route or it is down. It is not used
+ in forwarding decision.
+ Down means that the Ip interface on which it is configured is down.
+ (Note: ip interface down may be for two reason - its admin status or
+ the L2 interface , on which the ip interface is configured, status"
+ ::= { rlInetStaticRouteEntry 11 }
+
+
+--- Clear entries from ipNetToPhysicalTable
+
+rlIpNetToPhysicalTableClearTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlIpNetToPhysicalTableClearEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entity is used to clear all or specific-type entries from ipNetToPhysicalTable."
+ ::= { rlIPv6 10 }
+
+rlIpNetToPhysicalTableClearEntry OBJECT-TYPE
+ SYNTAX RlIpNetToPhysicalTableClearEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A particular entry in this table."
+ INDEX {
+ rlIpNetToPhysicalTableClearIfIndex
+ }
+ ::= { rlIpNetToPhysicalTableClearTable 1 }
+
+RlIpNetToPhysicalTableClearEntry ::= SEQUENCE {
+ rlIpNetToPhysicalTableClearIfIndex InterfaceIndexOrZero,
+ rlIpNetToPhysicalTableClearScope INTEGER
+ }
+
+rlIpNetToPhysicalTableClearIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Interface index of to clear or zero in case of whole table."
+ ::= { rlIpNetToPhysicalTableClearEntry 1 }
+
+
+rlIpNetToPhysicalTableClearScope OBJECT-TYPE
+ SYNTAX INTEGER {
+ all(1),
+ dynamicOnly(2),
+ staticOnly(3)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Scope of the action - type of entries to delete."
+ ::= { rlIpNetToPhysicalTableClearEntry 2 }
+
+
+
+
+--- Inet IP Distance Table
+
+
+rlInetRoutingDistanceTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlInetRoutingDistanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table defines administrative distances for
+ different protocol routes that are inserted into
+ the routing table."
+ ::= { ipSpec 29 }
+
+
+rlInetRoutingDistanceEntry OBJECT-TYPE
+ SYNTAX RlInetRoutingDistanceEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of distances per inet address type."
+ INDEX {
+ rlInetRoutingDistanceType
+ }
+ ::= { rlInetRoutingDistanceTable 1 }
+
+
+RlInetRoutingDistanceEntry ::= SEQUENCE {
+ rlInetRoutingDistanceType INTEGER,
+ rlInetRoutingDistanceConnected INTEGER,
+ rlInetRoutingDistanceStatic INTEGER,
+ rlInetRoutingDistanceRip INTEGER,
+ rlInetRoutingDistanceOspfInternal INTEGER,
+ rlInetRoutingDistanceOspfExternal INTEGER
+ }
+
+
+rlInetRoutingDistanceType OBJECT-TYPE
+ SYNTAX INTEGER {
+ ipv4(1),
+ ipv6(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The inet address type for distance definitions set,
+ either IPv4 or IPv6."
+ ::= { rlInetRoutingDistanceEntry 1 }
+
+
+rlInetRoutingDistanceConnected OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administrative distance used for directly connected routes."
+ ::= { rlInetRoutingDistanceEntry 2 }
+
+
+rlInetRoutingDistanceStatic OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administrative distance used for static routes."
+ ::= { rlInetRoutingDistanceEntry 3 }
+
+
+rlInetRoutingDistanceRip OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administrative distance used for RIP routes."
+ ::= { rlInetRoutingDistanceEntry 4 }
+
+
+rlInetRoutingDistanceOspfInternal OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administrative distance used for OSPF internal routes."
+ ::= { rlInetRoutingDistanceEntry 5 }
+
+
+rlInetRoutingDistanceOspfExternal OBJECT-TYPE
+ SYNTAX INTEGER (0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The administrative distance used for OSPF Autonomous System external routes."
+ ::= { rlInetRoutingDistanceEntry 6 }
+
+
+
+--- Internal inetCidrRouteTable (including custom rlInetCidrRouteEntry objects)
+
+
+rlInternInetCidrRouteTable OBJECT-TYPE
+SYNTAX SEQUENCE OF RlInternInetCidrRouteEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "Internal inetCidrRouteTable - this entity's IP Routing table."
+REFERENCE
+ "RFC 1213 Section 6.6, The IP Group"
+ ::= { ipSpec 30 }
+
+rlInternInetCidrRouteEntry OBJECT-TYPE
+SYNTAX RlInternInetCidrRouteEntry
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "A particular route to a particular destination, under a
+ particular policy (as reflected in the
+ rlInternInetCidrRoutePolicy object).
+
+ Dynamically created rows will survive an agent reboot.
+
+ Implementers need to be aware that if the total number
+ of elements (octets or sub-identifiers) in
+ rlInternInetCidrRouteDest, rlInternInetCidrRoutePolicy, and
+ rlInternInetCidrRouteNextHop exceeds 111, then OIDs of column
+ instances in this table will have more than 128 sub-
+ identifiers and cannot be accessed using SNMPv1,
+ SNMPv2c, or SNMPv3."
+INDEX {
+ rlInternInetCidrRouteDestType,
+ rlInternInetCidrRouteDest,
+ rlInternInetCidrRoutePfxLen,
+ rlInternInetCidrRoutePolicy,
+ rlInternInetCidrRouteNextHopType,
+ rlInternInetCidrRouteNextHop
+ }
+::= { rlInternInetCidrRouteTable 1 }
+
+RlInternInetCidrRouteEntry ::= SEQUENCE {
+ rlInternInetCidrRouteDestType InetAddressType,
+ rlInternInetCidrRouteDest InetAddress,
+ rlInternInetCidrRoutePfxLen InetAddressPrefixLength,
+ rlInternInetCidrRoutePolicy OBJECT IDENTIFIER,
+ rlInternInetCidrRouteNextHopType InetAddressType,
+ rlInternInetCidrRouteNextHop InetAddress,
+ rlInternInetCidrRouteIfIndex InterfaceIndexOrZero,
+ rlInternInetCidrRouteType INTEGER,
+ rlInternInetCidrRouteProto IANAipRouteProtocol,
+ rlInternInetCidrRouteAge Gauge32,
+ rlInternInetCidrRouteNextHopAS InetAutonomousSystemNumber,
+ rlInternInetCidrRouteMetric1 Integer32,
+ rlInternInetCidrRouteMetric2 Integer32,
+ rlInternInetCidrRouteMetric3 Integer32,
+ rlInternInetCidrRouteMetric4 Integer32,
+ rlInternInetCidrRouteMetric5 Integer32,
+ rlInternInetCidrRouteStatus RowStatus,
+ rlInternInetCidrRouteLifetime Unsigned32,
+ rlInternInetCidrRouteInfo INTEGER
+
+}
+
+rlInternInetCidrRouteDestType OBJECT-TYPE
+SYNTAX InetAddressType
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "The type of the rlInternInetCidrRouteDest address, as defined
+ in the InetAddress MIB.
+
+ Only those address types that may appear in an actual
+ routing table are allowed as values of this object."
+REFERENCE "RFC 4001"
+::= { rlInternInetCidrRouteEntry 1 }
+
+rlInternInetCidrRouteDest OBJECT-TYPE
+SYNTAX InetAddress
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "The destination IP address of this route.
+
+ The type of this address is determined by the value of
+ the rlInternInetCidrRouteDestType object.
+
+ The values for the index objects rlInternInetCidrRouteDest and
+ rlInternInetCidrRoutePfxLen must be consistent. When the value
+ of rlInternInetCidrRouteDest (excluding the zone index, if one
+ is present) is x, then the bitwise logical-AND
+ of x with the value of the mask formed from the
+ corresponding index object rlInternInetCidrRoutePfxLen MUST be
+ equal to x. If not, then the index pair is not
+ consistent and an inconsistentName error must be
+ returned on SET or CREATE requests."
+
+::= { rlInternInetCidrRouteEntry 2 }
+
+rlInternInetCidrRoutePfxLen OBJECT-TYPE
+SYNTAX InetAddressPrefixLength
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "Indicates the number of leading one bits that form the
+ mask to be logical-ANDed with the destination address
+ before being compared to the value in the
+ rlInternInetCidrRouteDest field.
+
+ The values for the index objects rlInternInetCidrRouteDest and
+ rlInternInetCidrRoutePfxLen must be consistent. When the value
+ of rlInternInetCidrRouteDest (excluding the zone index, if one
+ is present) is x, then the bitwise logical-AND
+ of x with the value of the mask formed from the
+ corresponding index object rlInternInetCidrRoutePfxLen MUST be
+ equal to x. If not, then the index pair is not
+ consistent and an inconsistentName error must be
+ returned on SET or CREATE requests."
+
+::= { rlInternInetCidrRouteEntry 3 }
+
+rlInternInetCidrRoutePolicy OBJECT-TYPE
+SYNTAX OBJECT IDENTIFIER
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "This object is an opaque object without any defined
+ semantics. Its purpose is to serve as an additional
+ index that may delineate between multiple entries to
+ the same destination. The value { 0 0 } shall be used
+ as the default value for this object."
+::= { rlInternInetCidrRouteEntry 4 }
+
+rlInternInetCidrRouteNextHopType OBJECT-TYPE
+SYNTAX InetAddressType
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "The type of the rlInternInetCidrRouteNextHop address, as
+ defined in the InetAddress MIB.
+
+ Value should be set to unknown(0) for non-remote
+ routes.
+
+ Only those address types that may appear in an actual
+ routing table are allowed as values of this object."
+REFERENCE "RFC 4001"
+::= { rlInternInetCidrRouteEntry 5 }
+
+rlInternInetCidrRouteNextHop OBJECT-TYPE
+SYNTAX InetAddress
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "On remote routes, the address of the next system en
+ route. For non-remote routes, a zero length string.
+
+ The type of this address is determined by the value of
+ the rlInternInetCidrRouteNextHopType object."
+::= { rlInternInetCidrRouteEntry 6 }
+
+rlInternInetCidrRouteIfIndex OBJECT-TYPE
+SYNTAX InterfaceIndexOrZero
+MAX-ACCESS not-accessible
+STATUS current
+DESCRIPTION
+ "The ifIndex value that identifies the local interface
+ through which the next hop of this route should be
+ reached. A value of 0 is valid and represents the
+ scenario where no interface is specified."
+::= { rlInternInetCidrRouteEntry 7 }
+
+rlInternInetCidrRouteType OBJECT-TYPE
+SYNTAX INTEGER {
+ other (1), -- not specified by this MIB
+ reject (2), -- route that discards traffic and
+ -- returns ICMP notification
+ local (3), -- local interface
+ remote (4), -- remote destination
+ blackhole(5) -- route that discards traffic
+ -- silently
+ }
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "The type of route. Note that local(3) refers to a
+ route for which the next hop is the final destination;
+ remote(4) refers to a route for which the next hop is
+ not the final destination.
+
+ Routes that do not result in traffic forwarding or
+ rejection should not be displayed, even if the
+ implementation keeps them stored internally.
+
+ reject(2) refers to a route that, if matched, discards
+ the message as unreachable and returns a notification
+ (e.g., ICMP error) to the message sender. This is used
+ in some protocols as a means of correctly aggregating
+ routes.
+
+ blackhole(5) refers to a route that, if matched,
+ discards the message silently."
+::= { rlInternInetCidrRouteEntry 8 }
+
+rlInternInetCidrRouteProto OBJECT-TYPE
+SYNTAX IANAipRouteProtocol
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "The routing mechanism via which this route was learned.
+ Inclusion of values for gateway routing protocols is
+ not intended to imply that hosts should support those
+ protocols."
+::= { rlInternInetCidrRouteEntry 9 }
+
+rlInternInetCidrRouteAge OBJECT-TYPE
+SYNTAX Gauge32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "The number of seconds since this route was last updated
+ or otherwise determined to be correct. Note that no
+ semantics of 'too old' can be implied, except through
+ knowledge of the routing protocol by which the route
+ was learned."
+::= { rlInternInetCidrRouteEntry 10 }
+
+rlInternInetCidrRouteNextHopAS OBJECT-TYPE
+SYNTAX InetAutonomousSystemNumber
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "The Autonomous System Number of the Next Hop. The
+ semantics of this object are determined by the routing-
+ protocol specified in the route's rlInternInetCidrRouteProto
+ value. When this object is unknown or not relevant, its
+ value should be set to zero."
+DEFVAL { 0 }
+::= { rlInternInetCidrRouteEntry 11 }
+
+rlInternInetCidrRouteMetric1 OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "The primary routing metric for this route. The
+ semantics of this metric are determined by the routing-
+ protocol specified in the route's rlInternInetCidrRouteProto
+ value. If this metric is not used, its value should be
+ set to -1."
+DEFVAL { -1 }
+::= { rlInternInetCidrRouteEntry 12 }
+
+rlInternInetCidrRouteMetric2 OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "An alternate routing metric for this route. The
+ semantics of this metric are determined by the routing-
+ protocol specified in the route's rlInternInetCidrRouteProto
+ value. If this metric is not used, its value should be
+ set to -1."
+DEFVAL { -1 }
+::= { rlInternInetCidrRouteEntry 13 }
+
+rlInternInetCidrRouteMetric3 OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "An alternate routing metric for this route. The
+ semantics of this metric are determined by the routing-
+ protocol specified in the route's rlInternInetCidrRouteProto
+ value. If this metric is not used, its value should be
+ set to -1."
+DEFVAL { -1 }
+::= { rlInternInetCidrRouteEntry 14 }
+
+rlInternInetCidrRouteMetric4 OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "An alternate routing metric for this route. The
+ semantics of this metric are determined by the routing-
+ protocol specified in the route's rlInternInetCidrRouteProto
+ value. If this metric is not used, its value should be
+ set to -1."
+DEFVAL { -1 }
+::= { rlInternInetCidrRouteEntry 15 }
+
+rlInternInetCidrRouteMetric5 OBJECT-TYPE
+SYNTAX Integer32
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "An alternate routing metric for this route. The
+ semantics of this metric are determined by the routing-
+ protocol specified in the route's rlInternInetCidrRouteProto
+ value. If this metric is not used, its value should be
+ set to -1."
+DEFVAL { -1 }
+::= { rlInternInetCidrRouteEntry 16 }
+
+rlInternInetCidrRouteStatus OBJECT-TYPE
+SYNTAX RowStatus
+MAX-ACCESS read-only
+STATUS current
+DESCRIPTION
+ "The row status variable, used according to row
+ installation and removal conventions.
+
+ A row entry cannot be modified when the status is
+ marked as active(1)."
+::= { rlInternInetCidrRouteEntry 17 }
+
+
+rlInternInetCidrRouteLifetime OBJECT-TYPE
+ SYNTAX Unsigned32
+ UNITS "seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The remaining length of time, in seconds, that this route
+ will continue to be valid, i.e., time until deprecation.
+ A value of 4,294,967,295 represents infinity."
+ DEFVAL { 4294967295 }
+ ::= { rlInternInetCidrRouteEntry 18 }
+
+rlInternInetCidrRouteInfo OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(0),
+ ospfIntraArea(1),
+ ospfInterArea(2),
+ ospfExternalType1(3),
+ ospfExternalType2(4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A reference to MIB definitions specific to the particular routing
+ protocol which is responsible for this route, as determined by the
+ value specified in the route's inetCidrRouteProto value."
+ DEFVAL { none }
+ ::= { rlInternInetCidrRouteEntry 19 }
+
+
+
+--- Internal Inet IP Static Route Table
+
+
+rlInternInetStaticRouteTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlInternInetStaticRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entity's static (user configured) Inet Routing table.
+ Entries are MAX-ACCESSible even if not used for forwarding "
+ ::= { ipSpec 31 }
+
+
+rlInternInetStaticRouteEntry OBJECT-TYPE
+ SYNTAX RlInternInetStaticRouteEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A particular Static(user configured) route to a particular destination."
+ INDEX {
+ rlInternInetStaticRouteDestType,
+ rlInternInetStaticRouteDest,
+ rlInternInetStaticRoutePfxLen,
+ rlInternInetStaticRouteNextHopType,
+ rlInternInetStaticRouteNextHop,
+ rlInternInetStaticRouteIfIndex
+ }
+ ::= { rlInternInetStaticRouteTable 1 }
+
+
+RlInternInetStaticRouteEntry ::= SEQUENCE {
+ rlInternInetStaticRouteDestType InetAddressType,
+ rlInternInetStaticRouteDest InetAddress,
+ rlInternInetStaticRoutePfxLen InetAddressPrefixLength,
+ rlInternInetStaticRouteNextHopType InetAddressType,
+ rlInternInetStaticRouteNextHop InetAddress,
+ rlInternInetStaticRouteIfIndex InterfaceIndexOrZero,
+ rlInternInetStaticRoutePathCost Unsigned32,
+ rlInternInetStaticRouteType INTEGER,
+ rlInternInetStaticRouteOwner INTEGER,
+ rlInternInetStaticRouteRowStatus RowStatus,
+ rlInternInetStaticRouteForwardingStatus INTEGER
+ }
+
+
+rlInternInetStaticRouteDestType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the address used as the destination
+ internetwork address or subnet address."
+ ::= { rlInternInetStaticRouteEntry 1 }
+
+
+rlInternInetStaticRouteDest OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Destination internetwork address or subnet address. The
+ destination prefix length is applied to this value, and to a
+ particular destination address, to determine whether the route
+ applies to the particular address.
+ If the prefix length is L, then applying the length to an address
+ means taking the first L bits of the address."
+ ::= { rlInternInetStaticRouteEntry 2 }
+
+
+rlInternInetStaticRoutePfxLen OBJECT-TYPE
+ SYNTAX InetAddressPrefixLength
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of leading one bits that form the
+ mask to be logical-ANDed with the destination address
+ before being compared to the value in the
+ rlInternInetStaticRouteDest field."
+ ::= { rlInternInetStaticRouteEntry 3 }
+
+
+rlInternInetStaticRouteNextHopType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the address used as the next-hop address
+ for this route."
+ ::= { rlInternInetStaticRouteEntry 4 }
+
+
+rlInternInetStaticRouteNextHop OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The next-hop IP address, if any.
+ If rlInternInetStaticRouteAction is 'forward', there may or may not be
+ a next-hop IP address.
+ A next-hop IP address is not required if an output interface
+ index is specified (in other words, if rlInternInetStaticRouteIfIndex is
+ non-zero).
+ If rlInternInetStaticRouteAction is not 'forward', there is no next-hop
+ IP address.
+ If there is no next-hop IP address, the rlInternInetStaticRouteNextHop
+ object is set to all zeroes."
+ ::= { rlInternInetStaticRouteEntry 5 }
+
+
+rlInternInetStaticRouteIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ifIndex value that identifies the local interface
+ through which the next hop of this route should be
+ reached. A value of 0 is valid and represents the
+ scenario where no interface is specified."
+ DEFVAL { 0 }
+ ::= { rlInternInetStaticRouteEntry 6 }
+
+
+rlInternInetStaticRoutePathCost OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Path cost for this static route. Value of 0 signs default value metric"
+ ::= { rlInternInetStaticRouteEntry 7 }
+
+
+rlInternInetStaticRouteType OBJECT-TYPE
+ SYNTAX INTEGER {
+ reject (2), -- route that discards traffic and
+ -- returns ICMP notification
+ local (3), -- local interface
+ remote (4), -- remote destination
+ blackhole(5), -- route that discards traffic
+ -- silently
+ nd (6) -- route that is configred through
+ -- neighbor discovery (relevant only for icmp owner)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Same as inetCidrRouteType MIB (excluded 'other' route type)"
+ DEFVAL { remote }
+ ::= { rlInternInetStaticRouteEntry 8 }
+
+
+rlInternInetStaticRouteOwner OBJECT-TYPE
+ SYNTAX INTEGER {
+ static (1),
+ dhcp (2),
+ default (3),
+ icmp (4)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Static - The route is configured over Static IP.
+ This route is written to configuration files.
+ Dhcp - The route is Configured by DHCP
+ (received as part of DHCP configuration)
+ This route IS NOT written to configuration files
+ Default - The route is Configured by default system config
+ exists till any other configuration is applied.
+ Icmp - The route is Configured by ICMP protocol either by
+ router advertisements or to be advertised in router
+ advertisements ."
+ ::= { rlInternInetStaticRouteEntry 9 }
+
+
+rlInternInetStaticRouteRowStatus OBJECT-TYPE
+ SYNTAX RowStatus
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The row status variable, used according to row
+ installation and removal conventions.
+ A row entry cannot be modified when the status is
+ marked as active(1)."
+ ::= { rlInternInetStaticRouteEntry 10 }
+
+rlInternInetStaticRouteForwardingStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ active (1),
+ inactive (2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "active - An indication that the route has implication on routing
+ inactive - the route is a backup route or it is down. It is not used
+ in forwarding decision.
+ Down means that the Ip interface on which it is configured is down."
+ ::= { rlInternInetStaticRouteEntry 11 }
+
+--- IPv6 Host Forwarding Table
+
+
+rlIpv6HostForwardingTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlIpv6HostForwardingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entity's IPv6 host forwarding table."
+ ::= { rlIPv6 11 }
+
+
+rlIpv6HostForwardingEntry OBJECT-TYPE
+ SYNTAX RlIpv6HostForwardingEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A particular Static(user configured) route to a particular destination."
+ INDEX {
+ rlIpv6HostForwardingDestType,
+ rlIpv6HostForwardingDest,
+ rlIpv6HostForwardingPfxLen,
+ rlIpv6HostForwardingNextHopType,
+ rlIpv6HostForwardingNextHop,
+ rlIpv6HostForwardingIfIndex,
+ rlIpv6HostForwardingType
+ }
+ ::= { rlIpv6HostForwardingTable 1 }
+
+
+RlIpv6HostForwardingEntry ::= SEQUENCE {
+ rlIpv6HostForwardingDestType InetAddressType,
+ rlIpv6HostForwardingDest InetAddress,
+ rlIpv6HostForwardingPfxLen InetAddressPrefixLength,
+ rlIpv6HostForwardingNextHopType InetAddressType,
+ rlIpv6HostForwardingNextHop InetAddress,
+ rlIpv6HostForwardingIfIndex InterfaceIndexOrZero,
+ rlIpv6HostForwardingType INTEGER,
+ rlIpv6HostForwardingPathCost Unsigned32
+ }
+
+rlIpv6HostForwardingDestType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The type of the address used as the destination
+ internetwork address or subnet address."
+ ::= { rlIpv6HostForwardingEntry 1 }
+
+
+rlIpv6HostForwardingDest OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Destination internetwork address or subnet address."
+ ::= { rlIpv6HostForwardingEntry 2 }
+
+
+rlIpv6HostForwardingPfxLen OBJECT-TYPE
+ SYNTAX InetAddressPrefixLength
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Indicates the number of leading one bits that form the
+ mask to be logical-ANDed with the destination address
+ before being compared to the value in the
+ rlIpv6HostForwardingDest field."
+ ::= { rlIpv6HostForwardingEntry 3 }
+
+
+rlIpv6HostForwardingNextHopType OBJECT-TYPE
+ SYNTAX InetAddressType
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The type of the address used as the next-hop address
+ for this route."
+ ::= { rlIpv6HostForwardingEntry 4 }
+
+
+rlIpv6HostForwardingNextHop OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The next-hop IP address, if any.
+ A next-hop IP address is not required if an output interface
+ index is specified (in other words, if rlIpv6HostForwardingIfIndex is
+ non-zero).
+ If there is no next-hop IP address, the rlIpv6HostForwardingNextHop
+ object is set to all zeroes."
+ ::= { rlIpv6HostForwardingEntry 5 }
+
+
+rlIpv6HostForwardingIfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndexOrZero
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "The ifIndex value that identifies the local interface
+ through which the next hop of this route should be
+ reached. A value of 0 is valid and represents the
+ scenario where no interface is specified."
+ DEFVAL { 0 }
+ ::= { rlIpv6HostForwardingEntry 6 }
+
+
+rlIpv6HostForwardingType OBJECT-TYPE
+ SYNTAX INTEGER {
+ redirect (1), -- ICMP redirect
+ local (2), -- local interface (subnet)
+ nd (3), -- route that is configred through router advertisment (on-link prefix)
+ remote-static (4), -- default static route
+ remote-dynamic (5) -- default dynamic route
+ }
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Forwarding type"
+ ::= { rlIpv6HostForwardingEntry 7 }
+
+rlIpv6HostForwardingPathCost OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "Path cost for this route."
+ ::= { rlIpv6HostForwardingEntry 8 }
+
+
+
+rlipv6EnabledByDefaultRemovedIfindex OBJECT-TYPE
+ SYNTAX INTEGER
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION "the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE.
+ If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user
+ on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is
+ that Ipv6 interface must be added. "
+ DEFVAL{ 0 }
+ ::= { rlIPv6 12 }
+
+--- rlManagementIPv6
+
+rlManagementIpv6 OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The system management IPv6 address which is kept between system mode changes"
+ ::= { rlIPv6 13 }
+
+rlManagementIpv6Action OBJECT-TYPE
+ SYNTAX INTEGER {
+ clear (1)
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The system management IPv6 action:
+ clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6"
+
+ ::= { rlIPv6 14 }
+
+
+--- IPv6 Tunnel if/addr/prefix Table (internal mib)
+
+rlIpv6TunnelToIPv6DbTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF RlIpv6TunnelToIPv6DbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This entity's IPv6 Tunnel if/addr/prefix table."
+ ::= { rlIPv6 15 }
+
+
+rlIpv6TunnelToIPv6DbEntry OBJECT-TYPE
+ SYNTAX RlIpv6TunnelToIPv6DbEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A particular tunnel configured data to IPv6 db."
+ INDEX {
+ rlIpv6TunnelToIPv6IfIndex
+ }
+ ::= { rlIpv6TunnelToIPv6DbTable 1 }
+
+
+RlIpv6TunnelToIPv6DbEntry ::= SEQUENCE {
+ rlIpv6TunnelToIPv6IfIndex InterfaceIndex,
+ rlIpv6TunnelToIPv6Action INTEGER,
+ rlIpv6TunnelToIPv6TunnelType IANAtunnelType,
+ rlIpv6TunnelToIPv6Address InetAddress,
+ rlIpv6TunnelToIPv6PrefixLength Unsigned32,
+ rlIpv6TunnelToIPv6Mtu Unsigned32,
+ rlIpv6TunnelToIPv6MinRtrSolicitationInterval Unsigned32,
+ rlIpv6TunnelToIPv6LinkLayerIPv4 IpAddress
+ }
+
+rlIpv6TunnelToIPv6IfIndex OBJECT-TYPE
+ SYNTAX InterfaceIndex
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "IfIndex of tunnel interface"
+ ::= { rlIpv6TunnelToIPv6DbEntry 1 }
+
+
+rlIpv6TunnelToIPv6Action OBJECT-TYPE
+ SYNTAX INTEGER {
+ createTunnel (1), -- create Tunnel interface
+ destroyTunnel (2), -- destroy Tunnel interface
+ addAddress (3), -- add IPv6 Address
+ deleteAddress (4), -- delete IPv6 Address
+ updateAddresses (5), -- refresh IPv6 Address on tunnel interface (if link-layer address was changed)
+ six2fourCfgRestore(6), -- restore lost 6to4 configuration
+ six2fourCfgClear (7) -- clear stale 6to4 configuration
+ }
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Action of the entry. All other fields relevant for appropriate actions."
+ ::= { rlIpv6TunnelToIPv6DbEntry 2 }
+
+
+rlIpv6TunnelToIPv6TunnelType OBJECT-TYPE
+ SYNTAX IANAtunnelType
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Tunnel type (manual/isatap/6to4/...)."
+ ::= { rlIpv6TunnelToIPv6DbEntry 3 }
+
+rlIpv6TunnelToIPv6Address OBJECT-TYPE
+ SYNTAX InetAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address used for this tunnel. Could be local IPv4 of the tunnel."
+ ::= { rlIpv6TunnelToIPv6DbEntry 4 }
+
+rlIpv6TunnelToIPv6PrefixLength OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The address/prefix length used for above address if applicable."
+ ::= { rlIpv6TunnelToIPv6DbEntry 5 }
+
+rlIpv6TunnelToIPv6Mtu OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Mtu of this interface. Used for host isatap tunnels"
+ ::= { rlIpv6TunnelToIPv6DbEntry 6 }
+
+rlIpv6TunnelToIPv6MinRtrSolicitationInterval OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Minimal router solicitation interval. Used for host isatap tunnels"
+ ::= { rlIpv6TunnelToIPv6DbEntry 7 }
+
+rlIpv6TunnelToIPv6LinkLayerIPv4 OBJECT-TYPE
+ SYNTAX IpAddress
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "IPv4 address used for link-layer of ipv6 over ipv4 tunnel"
+ ::= { rlIpv6TunnelToIPv6DbEntry 8 }
+
+rlIpv6DefaultTC OBJECT-TYPE
+ SYNTAX INTEGER(0..255)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The default value inserted into the TC
+ field of the IPv6 header of datagrams originated at
+ this entity, whenever a TC value is not supplied
+ by the application."
+ ::= { rlIPv6 16 }
+
+rlIpv6DefaultUP OBJECT-TYPE
+ SYNTAX INTEGER(0..7)
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "The default value inserted into the User Priority
+ field in the 802.1q VLAN tag of IPv4 frames sent by the
+ CPU."
+ ::= { rlIPv6 17 }
+
+rlIpv6MtuSize OBJECT-TYPE
+ SYNTAX Unsigned32
+ MAX-ACCESS read-write
+ STATUS current
+ DESCRIPTION
+ "Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload)."
+ ::= { rlIPv6 18 }
+
+END
|