path: root/MIBS/radlan/RADLAN-IPv6

RADLAN-IPv6 DEFINITIONS ::= BEGIN

-- Title:      RADLAN IPv6 Private Extension
-- Version:    7.60.00.00
-- Date:       25 Sep 2011

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,
    Integer32, Counter32, IpAddress,
    mib-2, Unsigned32, Counter64,
    zeroDotZero, Gauge32               FROM SNMPv2-SMI
    TimeInterval, TruthValue, DisplayString, RowStatus
                                       FROM SNMPv2-TC
    rnd                                FROM RADLAN-MIB
    ipSpec                             FROM RADLAN-IP
    ipAddressEntry, ipv6InterfaceEntry FROM IP-MIB
    ipNetToPhysicalEntry               FROM IP-MIB
    inetCidrRouteEntry                 FROM IP-FORWARD-MIB
    InterfaceIndex, InterfaceIndexOrZero
                                       FROM IF-MIB
    InetAddressPrefixLength, InetAddressType, InetAddress,
    InetAutonomousSystemNumber
                                       FROM INET-ADDRESS-MIB
    ipv6RouterAdvertEntry              FROM IP-MIB
    IANAipRouteProtocol                FROM IANA-RTPROTO-MIB
    IANAtunnelType                     FROM IANAifType-MIB;


rlIPv6  MODULE-IDENTITY
        LAST-UPDATED "200809250000Z"
        ORGANIZATION "Marvell Semiconductor, Inc."
        CONTACT-INFO
                    "www.marvell.com"
        DESCRIPTION
                "The private MIB module definition for IPv6 MIB."
        REVISION "200809250000Z"
        DESCRIPTION
                "Initial version of this MIB."
        ::= { rnd 129 }


--- IpAddressTable augmentation

rlIpAddressTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RlIpAddressEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "This table is parallel to ipAddressTable, and is used to
            add/delete IPv6 entries to/from that table. It contains
            private objects."
    ::= { ipSpec 19 }

rlIpAddressEntry OBJECT-TYPE
    SYNTAX     RlIpAddressEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "An address mapping for a particular interface."
    AUGMENTS { ipAddressEntry }
    ::= { rlIpAddressTable 1 }

RlIpAddressEntry ::= SEQUENCE {
        rlIpAddressPrefixLength         InetAddressPrefixLength,
        rlIpAddressType                 INTEGER
    }

rlIpAddressPrefixLength OBJECT-TYPE
    SYNTAX     InetAddressPrefixLength
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The prefix length of this address."
    DEFVAL { 64 }
    ::= { rlIpAddressEntry 1 }

rlIpAddressType OBJECT-TYPE
    SYNTAX     INTEGER {
                 unicast(1),
                 anycast(2),
                 broadcast(3),
                 multicast(4)
    }
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Extend standard field ipAddressType to multicast"
    DEFVAL { unicast }
    ::= { rlIpAddressEntry 2 }

--- ipv6InterfaceTable augmentation

rlipv6InterfaceTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF Rlipv6InterfaceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "This table is parallel to ipv6InterfaceTable, and is used to
            configure additional interface parameters."
    ::= { ipSpec 20 }

rlipv6InterfaceEntry OBJECT-TYPE
    SYNTAX     Rlipv6InterfaceEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "Additional configuration parameters for a particular interface."
    AUGMENTS { ipv6InterfaceEntry }
    ::= { rlipv6InterfaceTable 1 }

Rlipv6InterfaceEntry ::= SEQUENCE {
        rlipv6InterfaceNdDadAttemps             INTEGER,
        rlipv6InterfaceAutoconfigEnable         INTEGER,
        rlipv6InterfaceIcmpUnreachSendEnable    INTEGER,
        rlipv6InterfaceLinkMTU                  Unsigned32,
        rlipv6InterfaceMLDVersion               Unsigned32,
        rlipv6InterfaceRetransmitTime           Unsigned32,
        rlipv6InterfaceIcmpRedirectSendEnable   INTEGER
    }

rlipv6InterfaceNdDadAttemps OBJECT-TYPE
    SYNTAX     INTEGER (0..600)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "ND Duplicated address detection number of attempts."
    DEFVAL { 0 }
    ::= { rlipv6InterfaceEntry 1 }

rlipv6InterfaceAutoconfigEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enables or disables Stateless Address Auto configuration
         on specific interface."
    DEFVAL { enable }
    ::=  { rlipv6InterfaceEntry 2 }

rlipv6InterfaceIcmpUnreachSendEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enables or disables sending of ICMP Destination Unreachable
         Error on specific interface."
    DEFVAL { enable }
       ::= { rlipv6InterfaceEntry 3 }

rlipv6InterfaceLinkMTU OBJECT-TYPE
    SYNTAX     Unsigned32 (1280..65535)
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "The maximum transmission unit (MTU) size of IPv6 packets
            sent on an interface in bytes."
    DEFVAL { 1500 }
    ::= { rlipv6InterfaceEntry 4 }

rlipv6InterfaceMLDVersion OBJECT-TYPE
    SYNTAX  Unsigned32 (1..2)
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Set version of MLD protocol on specific interface."
    DEFVAL { 2 }
    ::=  { rlipv6InterfaceEntry 5 }

rlipv6InterfaceRetransmitTime OBJECT-TYPE
    SYNTAX     Unsigned32 (0 | 1000..3600000)
    UNITS      "milliseconds"
    MAX-ACCESS read-create
    STATUS     current
    DESCRIPTION
           "This value will be included in all IPv6 router advertisements sent
            out this interface. Very short intervals are not recommended in
            normal IPv6 operation. When a nondefault value is configured, the
            configured time is both advertised and used by the router itself.
            When value 0 is configured, 0 seconds (unspecified) advertised in
            router advertisements and the value 1000 milliseconds is used for
            the neighbor discovery activity of the router itself."
    DEFVAL { 0 }
    ::= { rlipv6InterfaceEntry 6 }

rlipv6InterfaceIcmpRedirectSendEnable OBJECT-TYPE
    SYNTAX  INTEGER {
        enable(1),
        disable(2)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Enables or disables sending of ICMP IPv6 redirect messages to
         re-send a packet through the same interface on which the packet was
         received."
    DEFVAL { enable }
       ::= { rlipv6InterfaceEntry 7 }

--- inetCidrRoutetable augmentation

rlinetCidrRouteTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RlinetCidrRouteEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "This table is parallel to inetCidrRouteTable, and is used to
            configure or display additional route parameters."
    ::= { ipSpec 21 }

rlinetCidrRouteEntry OBJECT-TYPE
    SYNTAX     RlinetCidrRouteEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "Additional parameters for a particular route."
    AUGMENTS { inetCidrRouteEntry }
    ::= { rlinetCidrRouteTable 1 }

RlinetCidrRouteEntry ::= SEQUENCE {
        rlinetCidrRouteLifetime         Unsigned32,
        rlinetCidrRouteInfo             INTEGER
    }

rlinetCidrRouteLifetime OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The remaining length of time, in seconds, that this route
            will continue to be valid, i.e., time until deprecation.
            A value of 4,294,967,295 represents infinity."
    DEFVAL { 4294967295 }
    ::= { rlinetCidrRouteEntry 1 }

rlinetCidrRouteInfo OBJECT-TYPE
    SYNTAX INTEGER {
        none(0),
        ospfIntraArea(1),
        ospfInterArea(2),
        ospfExternalType1(3),
        ospfExternalType2(4)
    }
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
            "A reference to MIB definitions specific to the particular routing
            protocol which is responsible for this route, as determined by the
            value specified  in the route's inetCidrRouteProto value."
    DEFVAL { none }
    ::= { rlinetCidrRouteEntry 2 }


--- ipNetToPhysicalTable augmentation

rlipNetToPhysicalTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RlipNetToPhysicalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "This table is parallel to ipNetToPhysicalTable, and is used to
            configure or display additional neighbor parameters."
    ::= { ipSpec 22 }

rlipNetToPhysicalEntry OBJECT-TYPE
    SYNTAX     RlipNetToPhysicalEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "Additional parameters for a neighbor"
    AUGMENTS { ipNetToPhysicalEntry }
    ::= { rlipNetToPhysicalTable 1 }

RlipNetToPhysicalEntry ::= SEQUENCE {
        rlipNetToPhysicalIsRouter               TruthValue,
        rlipNetToPhysicalReachableConfirmed     Unsigned32
    }

rlipNetToPhysicalIsRouter OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "This object has the value 'true(1)', if the neighbor
            is router; otherwise, the value is 'false(2)'."
    ::= { rlipNetToPhysicalEntry 1 }

rlipNetToPhysicalReachableConfirmed OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "Time (in seconds) since the address was confirmed to be reachable.
            Only, relevant for dynamic entries."
    ::= { rlipNetToPhysicalEntry 2 }


--- ICMPv6 Rate Limiting

rlipv6IcmpErrorRatelimitInterval OBJECT-TYPE
    SYNTAX      TimeInterval
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The time interval between tokens being placed in the bucket,
         each token represents a single ICMP error message.
         The interval measured in milliseconds."
    DEFVAL { 100 }
    ::= { rlIPv6 1 }

rlipv6IcmpErrorRatelimitBucketSize OBJECT-TYPE
    SYNTAX      INTEGER(1..200)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The maximum number of tokens stored in the bucket,
         each token represents a single ICMP error message."
    DEFVAL { 10 }
    ::= { rlIPv6 2 }


--- IPv6 Link Local Default Zone

rlipv6LLDefaultZone OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "The interface which would be used as the egress interface
        for packets sent without a specified IPv6Z interface identifier
        or with the default '0' identifier. Zero value means no default
        interface specified."
    DEFVAL { 0 }
    ::= { rlIPv6 3 }

--- rlIpv6GeneralPrefixTable

rlIpv6GeneralPrefixTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RlIpv6GeneralPrefixEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "This table defines general prefix description,
            based on which a number of longer, more specific, prefixes can
            be defined."
    ::= { rlIPv6 4 }

rlIpv6GeneralPrefixEntry OBJECT-TYPE
    SYNTAX     RlIpv6GeneralPrefixEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "Single entry in general prefix table."
    INDEX  {rlIpv6GeneralPrefixName}
    ::= { rlIpv6GeneralPrefixTable 1 }

RlIpv6GeneralPrefixEntry ::= SEQUENCE {
        rlIpv6GeneralPrefixName                     DisplayString,
        rlIpv6GeneralPrefixInetAddrType             InetAddressType,
        rlIpv6GeneralPrefixInetAddr                 InetAddress,
        rlIpv6GeneralPrefixInetAddrPrefixLength     InetAddressPrefixLength,
        rlIpv6GeneralPrefixInterfaceId              Unsigned32,
        rlIpv6GeneralPrefixRowStatus                RowStatus
    }

rlIpv6GeneralPrefixName OBJECT-TYPE
    SYNTAX      DisplayString
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "The name assigned to the prefix."
    ::= { rlIpv6GeneralPrefixEntry 1 }

rlIpv6GeneralPrefixInetAddrType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
         "Prefix inet address type. Has to be IPv6."
    ::= { rlIpv6GeneralPrefixEntry 2 }

rlIpv6GeneralPrefixInetAddr OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "The IPv6 network assigned to the general prefix.
         This argument must be in the form documented in RFC4293
         where the address is specified in hexadecimal using 16-bit values
         between colons."
    ::= { rlIpv6GeneralPrefixEntry 3 }

rlIpv6GeneralPrefixInetAddrPrefixLength OBJECT-TYPE
    SYNTAX     InetAddressPrefixLength
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
       "Indicates the number of leading one bits that form the
        mask to be logical-ANDed with the inet address
        before being compared to the value in the
        rlIpv6GeneralPrefixInetAddr field."
    ::= { rlIpv6GeneralPrefixEntry 4 }

rlIpv6GeneralPrefixInterfaceId OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
        "Interface id to use when creating prefix based on point-to-point interface."
    ::= { rlIpv6GeneralPrefixEntry 5 }

rlIpv6GeneralPrefixRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Row status."
    ::= { rlIpv6GeneralPrefixEntry 6 }


--- IPv6 maximum number of hops

rlipv6MaximumHopsNumber OBJECT-TYPE
    SYNTAX      INTEGER (1..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Maximum number of hops used in router advertisements and all IPv6 packets that
         are originated by the router."
    DEFVAL { 64 }
    ::= { rlIPv6 5 }

--- rlIpv6RouterAdvertPrefixTable

rlIpv6RouterAdvertPrefixTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RlIpv6RouterAdvertPrefixEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "This table defines IPv6 prefixes which are included in IPv6 Neighbor
           Discovery (ND) router advertisements."
    ::= { rlIPv6 6 }

rlIpv6RouterAdvertPrefixEntry OBJECT-TYPE
    SYNTAX     RlIpv6RouterAdvertPrefixEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "Single entry in Neighbor Discovery Prefix table."
    INDEX  {rlIpv6RouterAdvertPrefixIfIndex,
            rlIpv6RouterAdvertPrefixIsDefault,
            rlIpv6RouterAdvertPrefixInetAddrType,
            rlIpv6RouterAdvertPrefixInetAddr,
            rlIpv6RouterAdvertPrefixInetAddrPrefixLength}
    ::= { rlIpv6RouterAdvertPrefixTable 1 }

RlIpv6RouterAdvertPrefixEntry ::= SEQUENCE {
        rlIpv6RouterAdvertPrefixIfIndex                   InterfaceIndex,
        rlIpv6RouterAdvertPrefixIsDefault                 TruthValue,
        rlIpv6RouterAdvertPrefixInetAddrType              InetAddressType,
        rlIpv6RouterAdvertPrefixInetAddr                  InetAddress,
        rlIpv6RouterAdvertPrefixInetAddrPrefixLength      InetAddressPrefixLength,
        rlIpv6RouterAdvertPrefixAdminStatus               INTEGER,
        rlIpv6RouterAdvertPrefixAdvertise                 TruthValue,
        rlIpv6RouterAdvertPrefixOnLinkStatus              INTEGER,
        rlIpv6RouterAdvertPrefixAutonomousFlag            TruthValue,
        rlIpv6RouterAdvertPrefixAdvPreferredLifetime      Unsigned32,
        rlIpv6RouterAdvertPrefixAdvValidLifetime          Unsigned32,
        rlIpv6RouterAdvertPrefixRowStatus                 RowStatus
    }

rlIpv6RouterAdvertPrefixIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "The index value that uniquely identifies the interface on
            which this prefix is configured.  The interface identified
            by a particular value of this index is the same interface as
            identified by the same value of the IF-MIB's ifIndex."
    ::= { rlIpv6RouterAdvertPrefixEntry 1 }

rlIpv6RouterAdvertPrefixIsDefault OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
           "Indicates whether this object belongs to 'default' entry.
            Default entry contains specifics about advertising prefixes which
            were created from local ipv6 addresses."
    ::= { rlIpv6RouterAdvertPrefixEntry 2 }

rlIpv6RouterAdvertPrefixInetAddrType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "Prefix inet address type. Has to be IPv6."
    ::= { rlIpv6RouterAdvertPrefixEntry 3 }

rlIpv6RouterAdvertPrefixInetAddr OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The IPv6 network prefix to include in router advertisements.
          This argument must be in the form documented in RFC4293 where
          the address is specified in hexadecimal using 16-bit values between
          colons."
    ::= { rlIpv6RouterAdvertPrefixEntry 4 }

rlIpv6RouterAdvertPrefixInetAddrPrefixLength OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
         "The length of the IPv6 prefix. A decimal value that indicates
          how many of the high-order contiguous bits of the address comprise
          the prefix (the network portion of the address)."
    ::= { rlIpv6RouterAdvertPrefixEntry 5 }

rlIpv6RouterAdvertPrefixAdminStatus OBJECT-TYPE
    SYNTAX INTEGER {
           enable(1),
           disable(2)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "Admin status of the entry. Relevant only for default entry."
    DEFVAL { enable }
    ::= { rlIpv6RouterAdvertPrefixEntry 6 }

rlIpv6RouterAdvertPrefixAdvertise OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
         "Whether the prefix is included in router advertisements."
    DEFVAL { true }
    ::= { rlIpv6RouterAdvertPrefixEntry 7 }

rlIpv6RouterAdvertPrefixOnLinkStatus OBJECT-TYPE
    SYNTAX INTEGER {
        onlink      (1), -- connected prefix
        not-onlink  (2), -- connected state of the prefix is not specified
        off-link    (3)  -- not connected prefix
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "If object has the value 'onlink(1)', this prefix is confidered as on-link.
           This prefix will be advertised with the L-bit set and will be present
           in the Routing Table.
           If object has the value 'not-onlink(2)', this prefix will be advertised
           with the L-bit clear, but connected state of the prefix will not be changed.
           If object has the value 'offlink(3)', this prefix is confidered as on-link.
           This prefix will be advertised with the L-bit clear, and will be
           not present in the Routing Table."
    DEFVAL { onlink }
    ::= { rlIpv6RouterAdvertPrefixEntry 8 }

rlIpv6RouterAdvertPrefixAutonomousFlag OBJECT-TYPE
    SYNTAX      TruthValue
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "If object has the value 'true(1)', this prefix indicates to hosts on
           the local link that the specified prefix can be used for IPv6
           autoconfiguration. The prefix will be advertised with the A-bit set."
    DEFVAL { true }
    ::= { rlIpv6RouterAdvertPrefixEntry 9 }

rlIpv6RouterAdvertPrefixAdvPreferredLifetime OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The amount of time (in seconds) that the specified IPv6 prefix is
          advertised as being preferred."
    DEFVAL { 604800 }
    ::= { rlIpv6RouterAdvertPrefixEntry 10 }

rlIpv6RouterAdvertPrefixAdvValidLifetime OBJECT-TYPE
    SYNTAX      Unsigned32
    UNITS       "seconds"
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
          "The amount of time (in seconds) that the specified IPv6 prefix is
          advertised as being valid."
    DEFVAL { 2592000 }
    ::= { rlIpv6RouterAdvertPrefixEntry 11 }

rlIpv6RouterAdvertPrefixRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "Row status."
    ::= { rlIpv6RouterAdvertPrefixEntry 12 }


--- ipv6RouterAdvertTable augmentation

rlIpv6RouterAdvertTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RlIpv6RouterAdvertEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "This table is parallel to inetCidrRouteTable, and is used to
            configure or display additional route parameters."
    ::= { rlIPv6 7 }

rlIpv6RouterAdvertEntry OBJECT-TYPE
    SYNTAX     RlIpv6RouterAdvertEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "Additional parameters for a particular route."
    AUGMENTS { ipv6RouterAdvertEntry }
    ::= { rlIpv6RouterAdvertTable 1 }

RlIpv6RouterAdvertEntry ::= SEQUENCE {
        rlIpv6RouterAdvertAdvIntervalOption         TruthValue,
        rlIpv6RouterAdvertRouterPreference          INTEGER,
        rlIpv6RouterAdvertIsCurHopLimitUserConfigured  TruthValue
    }

rlIpv6RouterAdvertAdvIntervalOption OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "Indicates to a visiting mobile node the interval at which that node
            may expect to receive RAs. The node may use this information in its
            movement detection algorithm."
    DEFVAL { false }
    ::= { rlIpv6RouterAdvertEntry 1 }

rlIpv6RouterAdvertRouterPreference OBJECT-TYPE
    SYNTAX  INTEGER {
        low(1),
        medium(2),
        high(3)
    }
    MAX-ACCESS  read-create
    STATUS      current
    DESCRIPTION
        "Configures a default router preference (DRP) for the router on a specific interface."
    DEFVAL { medium }
       ::= { rlIpv6RouterAdvertEntry 2 }

rlIpv6RouterAdvertIsCurHopLimitUserConfigured OBJECT-TYPE
    SYNTAX     TruthValue
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "Indicates that hop limit value used in router advertisement is
            an user configured value and not necessarily value that is used by
            router itself."
    DEFVAL { false }
    ::= { rlIpv6RouterAdvertEntry 3 }

--- Clear IPv6 routes

rlipv6InetCidrTableClear OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
        "This scalar indicates to clear all ipv6 routes from inetCidrTable."
    ::= { rlIPv6 8 }


--- rlIpv6PathMtuTable

rlIpv6PathMtuTable OBJECT-TYPE
    SYNTAX     SEQUENCE OF RlIpv6PathMtuEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "This table used to represent all Path MTU changes to specific destination
            received from 'packet-too-big' messages."
    ::= { rlIPv6 9 }

rlIpv6PathMtuEntry OBJECT-TYPE
    SYNTAX     RlIpv6PathMtuEntry
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
           "Single entry in Path MTU table."
    INDEX  {rlIpv6PathMtuEntryInetDestAddrType,
            rlIpv6PathMtuEntryInetDestAddr}
    ::= { rlIpv6PathMtuTable 1 }

RlIpv6PathMtuEntry ::= SEQUENCE {
        rlIpv6PathMtuEntryInetDestAddrType  InetAddressType,
        rlIpv6PathMtuEntryInetDestAddr      InetAddress,
        rlIpv6PathMtuEntryMtu               Unsigned32,
        rlIpv6PathMtuEntryAge               Unsigned32
    }

rlIpv6PathMtuEntryInetDestAddrType OBJECT-TYPE
    SYNTAX     InetAddressType
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
         "Prefix inet address type. Has to be IPv6."
    ::= { rlIpv6PathMtuEntry 1 }

rlIpv6PathMtuEntryInetDestAddr OBJECT-TYPE
    SYNTAX     InetAddress
    MAX-ACCESS not-accessible
    STATUS     current
    DESCRIPTION
        "The IPv6 destination address for which packet-too-big message
         was received.
         This argument must be in the form documented in RFC4293
         where the address is specified in hexadecimal using 16-bit values
         between colons."
    ::= { rlIpv6PathMtuEntry 2 }

rlIpv6PathMtuEntryMtu OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "The MTU value that was received in packet-too-bug message for
         specific destination."
    ::= { rlIpv6PathMtuEntry 3 }

rlIpv6PathMtuEntryAge OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
        "This entry's age (seconds)"
    ::= { rlIpv6PathMtuEntry 4 }



--- Inet IP Static Route Table


rlInetStaticRouteTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlInetStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entity's static (user configured) Inet Routing table.
         Entries are MAX-ACCESSible even if not used for forwarding "
    ::= { ipSpec 28 }


rlInetStaticRouteEntry OBJECT-TYPE
    SYNTAX      RlInetStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A particular Static(user configured) route to a particular destination."
    INDEX {
        rlInetStaticRouteDestType,
        rlInetStaticRouteDest,
        rlInetStaticRoutePfxLen,
        rlInetStaticRouteNextHopType,
        rlInetStaticRouteNextHop,
        rlInetStaticRouteIfIndex
    }
    ::= { rlInetStaticRouteTable 1 }


RlInetStaticRouteEntry ::= SEQUENCE {
        rlInetStaticRouteDestType              InetAddressType,
        rlInetStaticRouteDest                  InetAddress,
        rlInetStaticRoutePfxLen                InetAddressPrefixLength,
        rlInetStaticRouteNextHopType           InetAddressType,
        rlInetStaticRouteNextHop               InetAddress,
        rlInetStaticRouteIfIndex               InterfaceIndexOrZero,
        rlInetStaticRoutePathCost              Unsigned32,
        rlInetStaticRouteType                  INTEGER,
        rlInetStaticRouteOwner                 INTEGER,
        rlInetStaticRouteRowStatus             RowStatus,
        rlInetStaticRouteForwardingStatus      INTEGER
    }


rlInetStaticRouteDestType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The type of the address used as the destination
       internetwork address or subnet address."
    ::= { rlInetStaticRouteEntry 1 }


rlInetStaticRouteDest OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Destination internetwork address or subnet address.  The
        destination prefix length is applied to this value, and to a
        particular destination address, to determine whether the route
        applies to the particular address.
        If the prefix length is L, then applying the length to an address
        means taking the first L bits of the address."
    ::= { rlInetStaticRouteEntry 2 }


rlInetStaticRoutePfxLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Indicates the number of leading one bits that form the
        mask to be logical-ANDed with the destination address
        before being compared to the value in the
        rlInetStaticRouteDest field."
    ::= { rlInetStaticRouteEntry 3 }


rlInetStaticRouteNextHopType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The type of the address used as the next-hop address
        for this route."
   ::= { rlInetStaticRouteEntry 4 }


rlInetStaticRouteNextHop OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The next-hop IP address, if any.
        If rlInetStaticRouteAction is 'forward', there may or may not be
        a next-hop IP address.
        A next-hop IP address is not required if an output interface
        index is specified (in other words, if rlInetStaticRouteIfIndex is
        non-zero).
        If rlInetStaticRouteAction is not 'forward', there is no next-hop
        IP address.
        If there is no next-hop IP address, the rlInetStaticRouteNextHop
        object is set to all zeroes."
   ::= { rlInetStaticRouteEntry 5 }


rlInetStaticRouteIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The ifIndex value that identifies the local interface
        through which the next hop of this route should be
        reached.  A value of 0 is valid and represents the
        scenario where no interface is specified."
    DEFVAL { 0 }
    ::= { rlInetStaticRouteEntry 6 }


rlInetStaticRoutePathCost OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Path cost for this static route."
    DEFVAL { 1 }
    ::= { rlInetStaticRouteEntry 7 }


rlInetStaticRouteType OBJECT-TYPE
    SYNTAX INTEGER {
        reject   (2), -- route that discards traffic and
                      --   returns ICMP notification
        local    (3), -- local interface
        remote   (4), -- remote destination
        blackhole(5), -- route that discards traffic
                      --   silently
        nd       (6)  -- route that is configred through
                      --   neighbor discovery (relevant only for icmp owner)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Same as inetCidrRouteType  MIB (excluded 'other' route type)"
    DEFVAL { remote }
    ::= { rlInetStaticRouteEntry 8 }


rlInetStaticRouteOwner OBJECT-TYPE
    SYNTAX INTEGER {
        static  (1),
        dhcp    (2),
        default (3),
        icmp    (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Static  - The route is configured over Static IP.
                  This route is written to configuration files.
        Dhcp    - The route is Configured by DHCP
                  (received as part of DHCP configuration)
                  This route IS NOT written to configuration files
        Default - The route is Configured by default system config
                  exists till any other configuration is applied.
        Icmp    - The route is Configured by ICMP protocol either by
                  router advertisements or to be advertised in router
                  advertisements ."
    ::= { rlInetStaticRouteEntry 9 }


rlInetStaticRouteRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to row
        installation and removal conventions.
        A row entry cannot be modified when the status is
        marked as active(1)."
    ::= { rlInetStaticRouteEntry 10 }

rlInetStaticRouteForwardingStatus OBJECT-TYPE
    SYNTAX   INTEGER {
                active   (1),
                inactive (2)
             }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "active - An indication that the route has implication on routing
       inactive - the route is a backup route or it is down. It is not used
                  in forwarding decision.
       Down means that the Ip interface on which it is configured is down.
       (Note: ip interface down may be for two reason - its admin status or
       the L2 interface , on which the ip interface is configured, status"
    ::= { rlInetStaticRouteEntry 11 }


--- Clear entries from ipNetToPhysicalTable

rlIpNetToPhysicalTableClearTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlIpNetToPhysicalTableClearEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entity is used to clear all or specific-type entries from ipNetToPhysicalTable."
    ::= { rlIPv6 10 }

rlIpNetToPhysicalTableClearEntry OBJECT-TYPE
    SYNTAX      RlIpNetToPhysicalTableClearEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A particular entry in this table."
    INDEX {
        rlIpNetToPhysicalTableClearIfIndex
    }
    ::= { rlIpNetToPhysicalTableClearTable 1 }

RlIpNetToPhysicalTableClearEntry ::= SEQUENCE {
        rlIpNetToPhysicalTableClearIfIndex  InterfaceIndexOrZero,
        rlIpNetToPhysicalTableClearScope    INTEGER
    }

rlIpNetToPhysicalTableClearIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "Interface index of to clear or zero in case of whole table."
    ::= { rlIpNetToPhysicalTableClearEntry 1 }


rlIpNetToPhysicalTableClearScope OBJECT-TYPE
    SYNTAX  INTEGER {
       all(1),
       dynamicOnly(2),
       staticOnly(3)
     }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Scope of the action - type of entries to delete."
    ::= { rlIpNetToPhysicalTableClearEntry 2 }




--- Inet IP Distance Table


rlInetRoutingDistanceTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlInetRoutingDistanceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This table defines administrative distances for
         different protocol routes that are inserted into
         the routing table."
    ::= { ipSpec 29 }


rlInetRoutingDistanceEntry OBJECT-TYPE
    SYNTAX      RlInetRoutingDistanceEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A set of distances per inet address type."
    INDEX {
        rlInetRoutingDistanceType
    }
    ::= { rlInetRoutingDistanceTable 1 }


RlInetRoutingDistanceEntry ::= SEQUENCE {
        rlInetRoutingDistanceType               INTEGER,
        rlInetRoutingDistanceConnected          INTEGER,
        rlInetRoutingDistanceStatic             INTEGER,
        rlInetRoutingDistanceRip                INTEGER,
        rlInetRoutingDistanceOspfInternal       INTEGER,
        rlInetRoutingDistanceOspfExternal       INTEGER
    }


rlInetRoutingDistanceType OBJECT-TYPE
    SYNTAX  INTEGER {
        ipv4(1),
        ipv6(2)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The inet address type for distance definitions set,
       either IPv4 or IPv6."
    ::= { rlInetRoutingDistanceEntry 1 }


rlInetRoutingDistanceConnected OBJECT-TYPE
    SYNTAX      INTEGER  (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The administrative distance used for directly connected routes."
    ::= { rlInetRoutingDistanceEntry 2 }


rlInetRoutingDistanceStatic OBJECT-TYPE
    SYNTAX      INTEGER  (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The administrative distance used for static routes."
    ::= { rlInetRoutingDistanceEntry 3 }


rlInetRoutingDistanceRip OBJECT-TYPE
    SYNTAX      INTEGER  (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The administrative distance used for RIP routes."
    ::= { rlInetRoutingDistanceEntry 4 }


rlInetRoutingDistanceOspfInternal OBJECT-TYPE
    SYNTAX      INTEGER  (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The administrative distance used for OSPF internal routes."
    ::= { rlInetRoutingDistanceEntry 5 }


rlInetRoutingDistanceOspfExternal OBJECT-TYPE
    SYNTAX      INTEGER  (0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The administrative distance used for OSPF Autonomous System external routes."
    ::= { rlInetRoutingDistanceEntry 6 }



--- Internal inetCidrRouteTable (including custom rlInetCidrRouteEntry objects)


rlInternInetCidrRouteTable OBJECT-TYPE
SYNTAX     SEQUENCE OF RlInternInetCidrRouteEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "Internal inetCidrRouteTable - this entity's IP Routing table."
REFERENCE
       "RFC 1213 Section 6.6, The IP Group"
    ::= { ipSpec 30 }

rlInternInetCidrRouteEntry OBJECT-TYPE
SYNTAX     RlInternInetCidrRouteEntry
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "A particular route to a particular destination, under a
        particular policy (as reflected in the
        rlInternInetCidrRoutePolicy object).

        Dynamically created rows will survive an agent reboot.

        Implementers need to be aware that if the total number
        of elements (octets or sub-identifiers) in
        rlInternInetCidrRouteDest, rlInternInetCidrRoutePolicy, and
        rlInternInetCidrRouteNextHop exceeds 111, then OIDs of column
        instances in this table will have more than 128 sub-
        identifiers and cannot be accessed using SNMPv1,
        SNMPv2c, or SNMPv3."
INDEX {
    rlInternInetCidrRouteDestType,
    rlInternInetCidrRouteDest,
    rlInternInetCidrRoutePfxLen,
    rlInternInetCidrRoutePolicy,
    rlInternInetCidrRouteNextHopType,
    rlInternInetCidrRouteNextHop
    }
::= { rlInternInetCidrRouteTable 1 }

RlInternInetCidrRouteEntry ::= SEQUENCE {
    rlInternInetCidrRouteDestType     InetAddressType,
    rlInternInetCidrRouteDest         InetAddress,
    rlInternInetCidrRoutePfxLen       InetAddressPrefixLength,
    rlInternInetCidrRoutePolicy       OBJECT IDENTIFIER,
    rlInternInetCidrRouteNextHopType  InetAddressType,
    rlInternInetCidrRouteNextHop      InetAddress,
    rlInternInetCidrRouteIfIndex      InterfaceIndexOrZero,
    rlInternInetCidrRouteType         INTEGER,
    rlInternInetCidrRouteProto        IANAipRouteProtocol,
    rlInternInetCidrRouteAge          Gauge32,
    rlInternInetCidrRouteNextHopAS    InetAutonomousSystemNumber,
    rlInternInetCidrRouteMetric1      Integer32,
    rlInternInetCidrRouteMetric2      Integer32,
    rlInternInetCidrRouteMetric3      Integer32,
    rlInternInetCidrRouteMetric4      Integer32,
    rlInternInetCidrRouteMetric5      Integer32,
    rlInternInetCidrRouteStatus       RowStatus,
    rlInternInetCidrRouteLifetime     Unsigned32,
    rlInternInetCidrRouteInfo         INTEGER

}

rlInternInetCidrRouteDestType OBJECT-TYPE
SYNTAX     InetAddressType
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "The type of the rlInternInetCidrRouteDest address, as defined
        in the InetAddress MIB.

        Only those address types that may appear in an actual
        routing table are allowed as values of this object."
REFERENCE "RFC 4001"
::= { rlInternInetCidrRouteEntry 1 }

rlInternInetCidrRouteDest OBJECT-TYPE
SYNTAX     InetAddress
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "The destination IP address of this route.

        The type of this address is determined by the value of
        the rlInternInetCidrRouteDestType object.

        The values for the index objects rlInternInetCidrRouteDest and
        rlInternInetCidrRoutePfxLen must be consistent.  When the value
        of rlInternInetCidrRouteDest (excluding the zone index, if one
        is present) is x, then the bitwise logical-AND
        of x with the value of the mask formed from the
        corresponding index object rlInternInetCidrRoutePfxLen MUST be
        equal to x.  If not, then the index pair is not
        consistent and an inconsistentName error must be
        returned on SET or CREATE requests."

::= { rlInternInetCidrRouteEntry 2 }

rlInternInetCidrRoutePfxLen OBJECT-TYPE
SYNTAX     InetAddressPrefixLength
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "Indicates the number of leading one bits that form the
        mask to be logical-ANDed with the destination address
        before being compared to the value in the
        rlInternInetCidrRouteDest field.

        The values for the index objects rlInternInetCidrRouteDest and
        rlInternInetCidrRoutePfxLen must be consistent.  When the value
        of rlInternInetCidrRouteDest (excluding the zone index, if one
        is present) is x, then the bitwise logical-AND
        of x with the value of the mask formed from the
        corresponding index object rlInternInetCidrRoutePfxLen MUST be
        equal to x.  If not, then the index pair is not
        consistent and an inconsistentName error must be
        returned on SET or CREATE requests."

::= { rlInternInetCidrRouteEntry 3 }

rlInternInetCidrRoutePolicy OBJECT-TYPE
SYNTAX     OBJECT IDENTIFIER
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "This object is an opaque object without any defined
        semantics.  Its purpose is to serve as an additional
        index that may delineate between multiple entries to
        the same destination.  The value { 0 0 } shall be used
        as the default value for this object."
::= { rlInternInetCidrRouteEntry 4 }

rlInternInetCidrRouteNextHopType OBJECT-TYPE
SYNTAX     InetAddressType
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "The type of the rlInternInetCidrRouteNextHop address, as
        defined in the InetAddress MIB.

        Value should be set to unknown(0) for non-remote
        routes.

        Only those address types that may appear in an actual
        routing table are allowed as values of this object."
REFERENCE "RFC 4001"
::= { rlInternInetCidrRouteEntry 5 }

rlInternInetCidrRouteNextHop OBJECT-TYPE
SYNTAX     InetAddress
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "On remote routes, the address of the next system en
       route.  For non-remote routes, a zero length string.

        The type of this address is determined by the value of
        the rlInternInetCidrRouteNextHopType object."
::= { rlInternInetCidrRouteEntry 6 }

rlInternInetCidrRouteIfIndex OBJECT-TYPE
SYNTAX     InterfaceIndexOrZero
MAX-ACCESS not-accessible
STATUS     current
DESCRIPTION
       "The ifIndex value that identifies the local interface
        through which the next hop of this route should be
        reached.  A value of 0 is valid and represents the
        scenario where no interface is specified."
::= { rlInternInetCidrRouteEntry 7 }

rlInternInetCidrRouteType OBJECT-TYPE
SYNTAX     INTEGER {
            other    (1), -- not specified by this MIB
            reject   (2), -- route that discards traffic and
                          --   returns ICMP notification
            local    (3), -- local interface
            remote   (4), -- remote destination
            blackhole(5)  -- route that discards traffic
                          --   silently
         }
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "The type of route.  Note that local(3) refers to a
        route for which the next hop is the final destination;
        remote(4) refers to a route for which the next hop is
        not the final destination.

        Routes that do not result in traffic forwarding or
        rejection should not be displayed, even if the
        implementation keeps them stored internally.

        reject(2) refers to a route that, if matched, discards
        the message as unreachable and returns a notification
        (e.g., ICMP error) to the message sender.  This is used
        in some protocols as a means of correctly aggregating
        routes.

        blackhole(5) refers to a route that, if matched,
        discards the message silently."
::= { rlInternInetCidrRouteEntry 8 }

rlInternInetCidrRouteProto OBJECT-TYPE
SYNTAX     IANAipRouteProtocol
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "The routing mechanism via which this route was learned.
        Inclusion of values for gateway routing protocols is
        not intended to imply that hosts should support those
        protocols."
::= { rlInternInetCidrRouteEntry 9 }

rlInternInetCidrRouteAge OBJECT-TYPE
SYNTAX     Gauge32
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "The number of seconds since this route was last updated
        or otherwise determined to be correct.  Note that no
        semantics of 'too old' can be implied, except through
        knowledge of the routing protocol by which the route
        was learned."
::= { rlInternInetCidrRouteEntry 10 }

rlInternInetCidrRouteNextHopAS OBJECT-TYPE
SYNTAX     InetAutonomousSystemNumber
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "The Autonomous System Number of the Next Hop.  The
        semantics of this object are determined by the routing-
        protocol specified in the route's rlInternInetCidrRouteProto
        value.  When this object is unknown or not relevant, its
        value should be set to zero."
DEFVAL { 0 }
::= { rlInternInetCidrRouteEntry 11 }

rlInternInetCidrRouteMetric1 OBJECT-TYPE
SYNTAX     Integer32
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "The primary routing metric for this route.  The
        semantics of this metric are determined by the routing-
        protocol specified in the route's rlInternInetCidrRouteProto
        value.  If this metric is not used, its value should be
        set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 12 }

rlInternInetCidrRouteMetric2 OBJECT-TYPE
SYNTAX     Integer32
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "An alternate routing metric for this route.  The
        semantics of this metric are determined by the routing-
        protocol specified in the route's rlInternInetCidrRouteProto
        value.  If this metric is not used, its value should be
        set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 13 }

rlInternInetCidrRouteMetric3 OBJECT-TYPE
SYNTAX     Integer32
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "An alternate routing metric for this route.  The
        semantics of this metric are determined by the routing-
        protocol specified in the route's rlInternInetCidrRouteProto
        value.  If this metric is not used, its value should be
        set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 14 }

rlInternInetCidrRouteMetric4 OBJECT-TYPE
SYNTAX     Integer32
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "An alternate routing metric for this route.  The
        semantics of this metric are determined by the routing-
        protocol specified in the route's rlInternInetCidrRouteProto
        value.  If this metric is not used, its value should be
        set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 15 }

rlInternInetCidrRouteMetric5 OBJECT-TYPE
SYNTAX     Integer32
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "An alternate routing metric for this route.  The
        semantics of this metric are determined by the routing-
        protocol specified in the route's rlInternInetCidrRouteProto
        value.  If this metric is not used, its value should be
        set to -1."
DEFVAL { -1 }
::= { rlInternInetCidrRouteEntry 16 }

rlInternInetCidrRouteStatus OBJECT-TYPE
SYNTAX     RowStatus
MAX-ACCESS read-only
STATUS     current
DESCRIPTION
       "The row status variable, used according to row
        installation and removal conventions.

        A row entry cannot be modified when the status is
        marked as active(1)."
::= { rlInternInetCidrRouteEntry 17 }


rlInternInetCidrRouteLifetime OBJECT-TYPE
    SYNTAX     Unsigned32
    UNITS      "seconds"
    MAX-ACCESS read-only
    STATUS     current
    DESCRIPTION
           "The remaining length of time, in seconds, that this route
            will continue to be valid, i.e., time until deprecation.
            A value of 4,294,967,295 represents infinity."
    DEFVAL { 4294967295 }
    ::= { rlInternInetCidrRouteEntry 18 }

rlInternInetCidrRouteInfo OBJECT-TYPE
    SYNTAX INTEGER {
        none(0),
        ospfIntraArea(1),
        ospfInterArea(2),
        ospfExternalType1(3),
        ospfExternalType2(4)
    }
    MAX-ACCESS read-only
    STATUS   current
    DESCRIPTION
            "A reference to MIB definitions specific to the particular routing
            protocol which is responsible for this route, as determined by the
            value specified  in the route's inetCidrRouteProto value."
    DEFVAL { none }
    ::= { rlInternInetCidrRouteEntry 19 }



--- Internal Inet IP Static Route Table


rlInternInetStaticRouteTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlInternInetStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entity's static (user configured) Inet Routing table.
         Entries are MAX-ACCESSible even if not used for forwarding "
    ::= { ipSpec 31 }


rlInternInetStaticRouteEntry OBJECT-TYPE
    SYNTAX      RlInternInetStaticRouteEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A particular Static(user configured) route to a particular destination."
    INDEX {
        rlInternInetStaticRouteDestType,
        rlInternInetStaticRouteDest,
        rlInternInetStaticRoutePfxLen,
        rlInternInetStaticRouteNextHopType,
        rlInternInetStaticRouteNextHop,
        rlInternInetStaticRouteIfIndex
    }
    ::= { rlInternInetStaticRouteTable 1 }


RlInternInetStaticRouteEntry ::= SEQUENCE {
        rlInternInetStaticRouteDestType              InetAddressType,
        rlInternInetStaticRouteDest                  InetAddress,
        rlInternInetStaticRoutePfxLen                InetAddressPrefixLength,
        rlInternInetStaticRouteNextHopType           InetAddressType,
        rlInternInetStaticRouteNextHop               InetAddress,
        rlInternInetStaticRouteIfIndex               InterfaceIndexOrZero,
        rlInternInetStaticRoutePathCost              Unsigned32,
        rlInternInetStaticRouteType                  INTEGER,
        rlInternInetStaticRouteOwner                 INTEGER,
        rlInternInetStaticRouteRowStatus             RowStatus,
        rlInternInetStaticRouteForwardingStatus      INTEGER
    }


rlInternInetStaticRouteDestType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The type of the address used as the destination
       internetwork address or subnet address."
    ::= { rlInternInetStaticRouteEntry 1 }


rlInternInetStaticRouteDest OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Destination internetwork address or subnet address.  The
        destination prefix length is applied to this value, and to a
        particular destination address, to determine whether the route
        applies to the particular address.
        If the prefix length is L, then applying the length to an address
        means taking the first L bits of the address."
    ::= { rlInternInetStaticRouteEntry 2 }


rlInternInetStaticRoutePfxLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Indicates the number of leading one bits that form the
        mask to be logical-ANDed with the destination address
        before being compared to the value in the
        rlInternInetStaticRouteDest field."
    ::= { rlInternInetStaticRouteEntry 3 }


rlInternInetStaticRouteNextHopType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The type of the address used as the next-hop address
        for this route."
   ::= { rlInternInetStaticRouteEntry 4 }


rlInternInetStaticRouteNextHop OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The next-hop IP address, if any.
        If rlInternInetStaticRouteAction is 'forward', there may or may not be
        a next-hop IP address.
        A next-hop IP address is not required if an output interface
        index is specified (in other words, if rlInternInetStaticRouteIfIndex is
        non-zero).
        If rlInternInetStaticRouteAction is not 'forward', there is no next-hop
        IP address.
        If there is no next-hop IP address, the rlInternInetStaticRouteNextHop
        object is set to all zeroes."
   ::= { rlInternInetStaticRouteEntry 5 }


rlInternInetStaticRouteIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The ifIndex value that identifies the local interface
        through which the next hop of this route should be
        reached.  A value of 0 is valid and represents the
        scenario where no interface is specified."
    DEFVAL { 0 }
    ::= { rlInternInetStaticRouteEntry 6 }


rlInternInetStaticRoutePathCost OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Path cost for this static route. Value of 0 signs default value metric"
    ::= { rlInternInetStaticRouteEntry 7 }


rlInternInetStaticRouteType OBJECT-TYPE
    SYNTAX INTEGER {
        reject   (2), -- route that discards traffic and
                      --   returns ICMP notification
        local    (3), -- local interface
        remote   (4), -- remote destination
        blackhole(5), -- route that discards traffic
                      --   silently
        nd       (6)  -- route that is configred through
                      --   neighbor discovery (relevant only for icmp owner)
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Same as inetCidrRouteType  MIB (excluded 'other' route type)"
    DEFVAL { remote }
    ::= { rlInternInetStaticRouteEntry 8 }


rlInternInetStaticRouteOwner OBJECT-TYPE
    SYNTAX INTEGER {
        static  (1),
        dhcp    (2),
        default (3),
        icmp    (4)
    }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Static  - The route is configured over Static IP.
                  This route is written to configuration files.
        Dhcp    - The route is Configured by DHCP
                  (received as part of DHCP configuration)
                  This route IS NOT written to configuration files
        Default - The route is Configured by default system config
                  exists till any other configuration is applied.
        Icmp    - The route is Configured by ICMP protocol either by
                  router advertisements or to be advertised in router
                  advertisements ."
    ::= { rlInternInetStaticRouteEntry 9 }


rlInternInetStaticRouteRowStatus OBJECT-TYPE
    SYNTAX      RowStatus
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The row status variable, used according to row
        installation and removal conventions.
        A row entry cannot be modified when the status is
        marked as active(1)."
    ::= { rlInternInetStaticRouteEntry 10 }

rlInternInetStaticRouteForwardingStatus OBJECT-TYPE
    SYNTAX   INTEGER {
                active   (1),
                inactive (2)
             }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "active - An indication that the route has implication on routing
       inactive - the route is a backup route or it is down. It is not used
                  in forwarding decision.
       Down means that the Ip interface on which it is configured is down."
    ::= { rlInternInetStaticRouteEntry 11 }

--- IPv6 Host Forwarding Table


rlIpv6HostForwardingTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlIpv6HostForwardingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entity's IPv6 host forwarding table."
    ::= { rlIPv6 11 }


rlIpv6HostForwardingEntry OBJECT-TYPE
    SYNTAX      RlIpv6HostForwardingEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A particular Static(user configured) route to a particular destination."
    INDEX {
        rlIpv6HostForwardingDestType,
        rlIpv6HostForwardingDest,
        rlIpv6HostForwardingPfxLen,
        rlIpv6HostForwardingNextHopType,
        rlIpv6HostForwardingNextHop,
        rlIpv6HostForwardingIfIndex,
        rlIpv6HostForwardingType
    }
    ::= { rlIpv6HostForwardingTable 1 }


RlIpv6HostForwardingEntry ::= SEQUENCE {
        rlIpv6HostForwardingDestType              InetAddressType,
        rlIpv6HostForwardingDest                  InetAddress,
        rlIpv6HostForwardingPfxLen                InetAddressPrefixLength,
        rlIpv6HostForwardingNextHopType           InetAddressType,
        rlIpv6HostForwardingNextHop               InetAddress,
        rlIpv6HostForwardingIfIndex               InterfaceIndexOrZero,
        rlIpv6HostForwardingType                  INTEGER,
        rlIpv6HostForwardingPathCost              Unsigned32
    }

rlIpv6HostForwardingDestType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
      "The type of the address used as the destination
       internetwork address or subnet address."
    ::= { rlIpv6HostForwardingEntry 1 }


rlIpv6HostForwardingDest OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Destination internetwork address or subnet address."
    ::= { rlIpv6HostForwardingEntry 2 }


rlIpv6HostForwardingPfxLen OBJECT-TYPE
    SYNTAX      InetAddressPrefixLength
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Indicates the number of leading one bits that form the
        mask to be logical-ANDed with the destination address
        before being compared to the value in the
        rlIpv6HostForwardingDest field."
    ::= { rlIpv6HostForwardingEntry 3 }


rlIpv6HostForwardingNextHopType OBJECT-TYPE
    SYNTAX      InetAddressType
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The type of the address used as the next-hop address
        for this route."
   ::= { rlIpv6HostForwardingEntry 4 }


rlIpv6HostForwardingNextHop OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The next-hop IP address, if any.
        A next-hop IP address is not required if an output interface
        index is specified (in other words, if rlIpv6HostForwardingIfIndex is
        non-zero).
        If there is no next-hop IP address, the rlIpv6HostForwardingNextHop
        object is set to all zeroes."
   ::= { rlIpv6HostForwardingEntry 5 }


rlIpv6HostForwardingIfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndexOrZero
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "The ifIndex value that identifies the local interface
        through which the next hop of this route should be
        reached.  A value of 0 is valid and represents the
        scenario where no interface is specified."
    DEFVAL { 0 }
    ::= { rlIpv6HostForwardingEntry 6 }


rlIpv6HostForwardingType OBJECT-TYPE
    SYNTAX INTEGER {
        redirect        (1), -- ICMP redirect
        local           (2), -- local interface (subnet)
        nd              (3), -- route that is configred through router advertisment (on-link prefix)
        remote-static   (4), -- default static route
        remote-dynamic  (5)  -- default dynamic route
    }
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "Forwarding type"
    ::= { rlIpv6HostForwardingEntry 7 }

rlIpv6HostForwardingPathCost OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
       "Path cost for this route."
    ::= { rlIpv6HostForwardingEntry 8 }



rlipv6EnabledByDefaultRemovedIfindex OBJECT-TYPE
    SYNTAX      INTEGER
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "the MIB is relevant when mtsc parameter DHCPv6_client_enabled_by_default is TRUE.
                 If the MIB has non zero value the meaning is that ipv6 interface has removed from configuration by the user
                 on the interface and signs to application not to add ipv6 interface. Otherwise (zero value) - the meaning is
                 that Ipv6 interface must be added. "
    DEFVAL{ 0 }
    ::= { rlIPv6 12 }

--- rlManagementIPv6

rlManagementIpv6 OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The system management IPv6 address which is kept between system mode changes"
    ::= { rlIPv6 13 }

rlManagementIpv6Action OBJECT-TYPE
    SYNTAX   INTEGER {
                clear   (1)
             }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The system management IPv6 action:
             clear - delete all ipv6 interfaces from startup configuration database except rlManagementIpv6"

    ::= { rlIPv6 14 }


--- IPv6 Tunnel if/addr/prefix Table (internal mib)

rlIpv6TunnelToIPv6DbTable OBJECT-TYPE
    SYNTAX      SEQUENCE OF RlIpv6TunnelToIPv6DbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
        "This entity's IPv6 Tunnel if/addr/prefix table."
    ::= { rlIPv6 15 }


rlIpv6TunnelToIPv6DbEntry OBJECT-TYPE
    SYNTAX      RlIpv6TunnelToIPv6DbEntry
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
       "A particular tunnel configured data to IPv6 db."
    INDEX {
        rlIpv6TunnelToIPv6IfIndex
    }
    ::= { rlIpv6TunnelToIPv6DbTable 1 }


RlIpv6TunnelToIPv6DbEntry ::= SEQUENCE {
        rlIpv6TunnelToIPv6IfIndex                       InterfaceIndex,
        rlIpv6TunnelToIPv6Action                        INTEGER,
        rlIpv6TunnelToIPv6TunnelType                    IANAtunnelType,
        rlIpv6TunnelToIPv6Address                       InetAddress,
        rlIpv6TunnelToIPv6PrefixLength                  Unsigned32,
        rlIpv6TunnelToIPv6Mtu                           Unsigned32,
        rlIpv6TunnelToIPv6MinRtrSolicitationInterval    Unsigned32,
        rlIpv6TunnelToIPv6LinkLayerIPv4                 IpAddress
    }

rlIpv6TunnelToIPv6IfIndex OBJECT-TYPE
    SYNTAX      InterfaceIndex
    MAX-ACCESS  not-accessible
    STATUS      current
    DESCRIPTION
      "IfIndex of tunnel interface"
    ::= { rlIpv6TunnelToIPv6DbEntry 1 }


rlIpv6TunnelToIPv6Action OBJECT-TYPE
    SYNTAX INTEGER {
        createTunnel      (1), -- create Tunnel interface
        destroyTunnel     (2), -- destroy Tunnel interface
        addAddress        (3), -- add IPv6 Address
        deleteAddress     (4), -- delete IPv6 Address
        updateAddresses   (5), -- refresh IPv6 Address on tunnel interface (if link-layer address was changed)
        six2fourCfgRestore(6), -- restore lost 6to4 configuration
        six2fourCfgClear  (7)  -- clear stale 6to4 configuration
    }
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Action of the entry. All other fields relevant for appropriate actions."
    ::= { rlIpv6TunnelToIPv6DbEntry 2 }


rlIpv6TunnelToIPv6TunnelType OBJECT-TYPE
    SYNTAX      IANAtunnelType
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Tunnel type (manual/isatap/6to4/...)."
    ::= { rlIpv6TunnelToIPv6DbEntry 3 }

rlIpv6TunnelToIPv6Address OBJECT-TYPE
    SYNTAX      InetAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The address used for this tunnel. Could be local IPv4 of the tunnel."
   ::= { rlIpv6TunnelToIPv6DbEntry 4 }

rlIpv6TunnelToIPv6PrefixLength OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "The address/prefix length used for above address if applicable."
   ::= { rlIpv6TunnelToIPv6DbEntry 5 }

rlIpv6TunnelToIPv6Mtu OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Mtu of this interface. Used for host isatap tunnels"
   ::= { rlIpv6TunnelToIPv6DbEntry 6 }

rlIpv6TunnelToIPv6MinRtrSolicitationInterval OBJECT-TYPE
    SYNTAX      Unsigned32
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "Minimal router solicitation interval. Used for host isatap tunnels"
   ::= { rlIpv6TunnelToIPv6DbEntry 7 }

rlIpv6TunnelToIPv6LinkLayerIPv4 OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
       "IPv4 address used for link-layer of ipv6 over ipv4 tunnel"
   ::= { rlIpv6TunnelToIPv6DbEntry 8 }

rlIpv6DefaultTC OBJECT-TYPE
    SYNTAX      INTEGER(0..255)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The default value inserted into the TC
      field of the IPv6 header of datagrams originated at
      this entity, whenever a TC value is not supplied
      by the application."
    ::= { rlIPv6 16 }

rlIpv6DefaultUP OBJECT-TYPE
    SYNTAX  INTEGER(0..7)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
      "The default value inserted into the User Priority
      field in the 802.1q VLAN tag of IPv4 frames sent by the
      CPU."
    ::= { rlIPv6 17 }

rlIpv6MtuSize OBJECT-TYPE
    SYNTAX     Unsigned32
    MAX-ACCESS read-write
    STATUS     current
    DESCRIPTION
           "Sets the maximum transmission unit (MTU) size in bytes of IPv6 packets (payload)."
    ::= { rlIPv6 18 }

END