path: root/MIBS/powerwalker/EPPC-MIB

--    PPC MIB
--    ====================================================================
--    Revision History
--     v0.13  2011-11-10   Gavin Zhao created, Lilinhua modified
--     *************************NMC v0.0.1.7***********************************
--     v0.14  2011-11-18   Lilinhua
--                         1. Modify string "ppcTrap" to "eppcTrap"
--	      2012-02-09   Lilinhua
--			   1. Modify upsESystemFaultCode's description "The warning code of UPS" to "The fault code of UPS".
--     *************************NMC v1.1.0.4************************************
--     v0.15  2012-07-20   Lilinhua
--			   1. upsEShutdownWarningPeriodInterval, modify access from read-only to read-write.
--			   2. upsEShutdownwarningPeriodTime, add unit second.
--            2012-07-31   Lilinhua
--                         1. Modify upsEBatteryTestElapsedTime's format from hh:mm:ss.ss to hh:mm:ss
--            2012-08-09   Lilinhua
--			   1. Modify values of upsEModuleWorkingMode as upsESystemStatus's.
--     *************************NMC v1.1.0.6************************************
--            2012-08-27   Lilinhua
--			   1. Modify "Moudles" to "Modules", advised by Beth. 
--			   2. Modify module name as phase name "upsEModuleOutputCurrentR", "upsEModuleOutputWattR", "upsEModuleOutputLoadR".
--			   3. Add Convert module item "upsEModuleTrapState(12)".
--			   4. Add Convert module item "upsEModuleConfigOutputVA(13)".
--			   5. Add Convert module item "upsEModuleOutputCurrentS(14)", "upsEModuleOutputCurrentT(15)".
--			   6. Add Convert module item "upsEModuleOutputWattS(16)", "upsEModuleOutputWattT(17)".
--			   7. Add Convert module item "upsEModuleOutputLoadS(18)", "upsEModuleOutputLoadT(19)".
--			   8. Add Convert module item "upsEModuleOutputVAR(20)", "upsEModuleOutputVAS(21)", "upsEModuleOutputVAT(22)".
--			   9. Modify upsETrapState max length from 255 to 127.
--     *************************NMC v1.1.0.6************************************
--            2012-08-27   Lilinhua
--			   1. Modify trap description of Overload, OverTemperature. 
--     *************************NMC v1.3.0.0************************************
--            2013-06-21   Lilinhua
--			   1. Add two upsEShutdownEvents: "belowCapacityLimit(11), belowRemainTimeLimit(12)".
--			   2. Add 4 traps: upsEBelowCapacityLimit, upsENotBelowCapacityLimit, upsEBelowRemainTimeLimit, upsENotBelowRemainTimeLimit.
--			   3. Add 2 config data: upsESystemConfigBelowCapacityLimit, upsESystemConfigBelowRemainTimeLimit.
--			   4. Modify upsETrapState's description: "trap 2(battery on)" to "trap 7(battery on)".
--     *************************NMC v1.4.0.3************************************
--            2014-10-15   Lilinhua
--			   1. Modify descriptions of "upsEEnvironmentTemperatureHighSetPoint, upsEEnvironmentHumidityHighSetPoint,
--			      upsEEnvironmentTemperatureLowSetPoint, upsEEnvironmentHumidityLowSetPoint".
--     *************************NMC v1.5.0.4************************************
--     v0.16  2015-01-05   Lilinhua
--			   1. Modify MIB for add Load segment.


EPPC-MIB	DEFINITIONS ::= BEGIN
		IMPORTS
		TRAP-TYPE
			FROM RFC-1215
		DisplayString
			FROM SNMPv2-TC
		OBJECT-TYPE
			FROM RFC-1212
		enterprises,Counter, IpAddress
			FROM RFC1155-SMI
                PositiveInteger,NonNegativeInteger
                     	FROM UPS-MIB;

ppc         	           OBJECT IDENTIFIER ::=  {  enterprises  935  }

device			   OBJECT IDENTIFIER ::=  {  ppc  10  }
upsAgent		   OBJECT IDENTIFIER ::=  {  device  1  }

upsE	                   OBJECT IDENTIFIER ::=  {  upsAgent  1  }
upsETraps  		   OBJECT IDENTIFIER ::=  {  upsAgent  2  }
upsEIdentity	       	   OBJECT IDENTIFIER ::=  {  upsE  1  }
upsESystemSummary	   OBJECT IDENTIFIER ::=  {  upsE  2  }
upsEBatterySystem	   OBJECT IDENTIFIER ::=  {  upsE  3  }
upsEPowerConverterSystem   OBJECT IDENTIFIER ::=  {  upsE  4  }
upsELoadSegment            OBJECT IDENTIFIER ::=  {  upsE  5  }
upsEEnvironment	           OBJECT IDENTIFIER ::=  {  upsE  6 }
upsEBatteryTest	           OBJECT IDENTIFIER ::=  {  upsE  7 }
upsEControl                OBJECT IDENTIFIER ::=  {  upsE  8 }
upsETrapControl		   OBJECT IDENTIFIER ::=  {  upsE  9 }

--========================================================================
--upsEIdentity
--========================================================================

	upsEIdentityManufacturer	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 31  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The name of the UPS manufacturer."
		::=  {  upsEIdentity  1  }

	upsEIdentityModel	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 63  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The UPS Model designation."
		::=  {  upsEIdentity  2  }

	upsEIdentityUPSFirmwareVerison	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 31  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The UPS firmware/software version(s)."
		::=  {  upsEIdentity  3  }

	upsEIndentityUPSSerialNumber	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 31  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"optional.
                               Most UPS don't supply the value of UPS serial No."
		::=  {  upsEIdentity  4  }

	upsEIdentityDescription	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 63  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"A string to identify the UPS. This object should be
               set by the administrator."
		::=  {  upsEIdentity  5  }

	upsEIdentityAgentSoftwareVerison	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 31  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The Network Management Card software/firmware version.  
                               This variable may or may not have the same value as
                               upsEIdentGroupUPSSoftwareVersion in some implementations."
		::=  {  upsEIdentity  6  }

	upsEIdentityAttachedDevices	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 63  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"A string identifying the devices attached to the output(s) 
                               of the UPS. This object should be set by the administrator"
		::=  {  upsEIdentity  7  }

--========================================================================
--upsESystemSummary
--========================================================================

	upsESystemStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { power-on ( 1 ) , stand-by( 2 ) , by-pass ( 3 ) ,
                                                line( 4 ) , battery ( 5 ) , battery-test ( 6 ) , fault ( 7 ) ,
                                               converter ( 8  ) , eco ( 9 ) , shutdown ( 10 ) , on-booster ( 11 ) , on-reducer ( 12 ) , other( 13 )  } 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The indication of UPS system status."
		::=  {  upsESystemSummary  1  }

      upsESystemTemperature	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The temperature of UPS presented in 0.1 degree."
		::=  {  upsESystemSummary  2  }

	upsESystemWarningCode	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 15 ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The warning code of UPS. Please refer the warning table 
                              of 'Q6' for details."
		::=  {  upsESystemSummary  3  }

	upsESystemFaultCode	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 15 ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The fault code of UPS.Please refer the fault code
                              of 'Q6' for details."
		::=  {  upsESystemSummary  4  }

	upsESystemConfigInputVoltage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger  
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the nominal input voltage presented in 0.1 V. On those 
                               systems  which support read-write access to this object, if there is an 
                               attempt to set this variable to a value that is not supported,
                               the request must be rejected and the agent shall respond with an 
                               appropriate error message, i.e., badValue for SNMPv1, or 
                               inconsistentValue for SNMPv2."
		::=  {  upsESystemSummary  5  }

	upsESystemConfigInputFrequence	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The nominal input frequency presented in 0.1 Hz. On those systems which support 
                               read-write access to this object, if there is an attempt to 
                               set this variable to a value that is not supported, the request 
                               must be rejected and the agent shall respond with an appropriate 
                               error message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2."
		::=  {  upsESystemSummary  6  }

	upsESystemConfigOutputVoltage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the nominal output voltage presented in 0.1V. On those systems
                               which support read-write access to this object, if there is an 
                               attempt to set this variable to a value that is not supported, 
                               the request must be rejected and the agent shall respond with an
                               appropriate error message, i.e., badValue for SNMPv1, or 
                               inconsistentValue for SNMPv2"
		::=  {  upsESystemSummary  7  }

	upsESystemConfigOutputFrequency	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger  
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The nominal output frequency presented in 0.1Hz. On those systems which support 
                               read-write access to this object, if there is an attempt to set 
                               this variable to a value that is not supported, the request must
                               be rejected and the agent shall respond with an appropriate error 
                               message, i.e., badValue for SNMPv1, or inconsistentValue for SNMPv2."
		::=  {  upsESystemSummary  8  }

	upsESystemConfigOutputVA	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger   
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the nominal Volt-Amp rating presented in VA."
		::=  {  upsESystemSummary  9  }

	upsESystemConfigOutputPower	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger  
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the nominal true power rating presented in W ."
		::=  {  upsESystemSummary  10  }

	upsESystemConfigOutputLoadHighSetPoint	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger   
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The maximum output load allowed before the load is too high for 
                               UPS operation "
		::=  {  upsESystemSummary  11  }

	upsESystemConfigOverTemperatureSetPoint	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger   
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The maximum temperature allowed before the UPS
                                         operation temperature is too high, presented in 0.1 degree."
		::=  {  upsESystemSummary  12  }

	upsESystemInputSourceNum	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The present external source of input power."
		::=  {  upsESystemSummary  13  }

	upsESystemInputLineBads	OBJECT-TYPE	
		SYNTAX			Counter
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The number of times the Input was out of tolerance in voltage or frequency.
                               Its value should be initialized 0 after agent restarting. "
		::=  {  upsESystemSummary  14  }

	upsESystemInputNumPhases	OBJECT-TYPE	
		SYNTAX			PositiveInteger  ( 1 .. 3  ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The number of input phase utilized is this device, serves as the table index.
                               This value indicate the device initialized feature."
		::=  {  upsESystemSummary  15  }

	upsESystemInputTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsSystemInputEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	"A list of input table entries. The number of entries is given by the 
                            value of upsESystemInputNumPhase."
		::=  { upsESystemSummary  16 }

	upsESystemInputEntry	OBJECT-TYPE
		SYNTAX		UpsSystemInputEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION 	"An entry containing information applicable to a particular input line."
		INDEX		{  upsESystemInputPhase  }
		::=  { upsESystemInputTable 1 }

	UpsSystemInputEntry  ::=  SEQUENCE {
		upsESystemInputPhase  PositiveInteger,
		upsESystemInputFrequency  NonNegativeInteger,
		upsESystemInputVoltage  NonNegativeInteger,
		upsESystemInputCurrent  NonNegativeInteger,
		upsESystemInputWatts  NonNegativeInteger
		}


	upsESystemInputPhase	OBJECT-TYPE	
		SYNTAX			PositiveInteger( 1 .. 3  ) 
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The number of the phase. Serves as index for input table"
		::=  {  upsESystemInputEntry  1  }


	upsESystemInputFrequency	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured input frquency from the UPS meters in 0.1Hz."
		::=  {  upsESystemInputEntry  2  }


	upsESystemInputVoltage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured input voltage from the UPS meters in 0.1 volts"
		::=  {  upsESystemInputEntry  3  }


	upsESystemInputCurrent	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured input mandatory from the UPS meters in 0.1 amps."
		::=  {  upsESystemInputEntry  4  }


	upsESystemInputWatts	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured input real power in watts."
		::=  {  upsESystemInputEntry  5  }

	upsESystemOutputNumPhase	OBJECT-TYPE	
		SYNTAX			PositiveInteger ( 1 .. 3  ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The number of metered output phases, serves as the table index.
                               This value indicate the device initialized feature."
		::=  {  upsESystemSummary  17  }

	upsESystemOutputTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsSystemOutputEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	       "A list of output table entries. The number of entries is given 
                                by the value of upsESystemOutputNumPhase."
		::=  { upsESystemSummary  18 }

	upsESystemOutputEntry	OBJECT-TYPE
		SYNTAX		UpsSystemOutputEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION  	"An entry containing information applicable to a particular line."
		INDEX		{  upsESystemOutputPhase  }
		::=  { upsESystemOutputTable 1 }

	UpsSystemOutputEntry  ::=  SEQUENCE {
		upsESystemOutputPhase  PositiveInteger,
		upsESystemOutputFrequency  NonNegativeInteger,
		upsESystemOutputVoltage  NonNegativeInteger,
		upsESystemOutputCurrent  NonNegativeInteger,
		upsESystemOutputWatts  NonNegativeInteger,
            upsESystemOutputVA   NonNegativeInteger,
		upsESystemOutputLoad  NonNegativeInteger
		}


	upsESystemOutputPhase	OBJECT-TYPE	
		SYNTAX			PositiveInteger ( 1 .. 3  ) 
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The number of the phase. Serves as index for output table"
		::=  {  upsESystemOutputEntry  1  }


	upsESystemOutputFrequency	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured output frequency from the UPS meters in 0.1Hz."
		::=  {  upsESystemOutputEntry  2  }


	upsESystemOutputVoltage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured output voltage from the UPS meters in 0.1 volts"
		::=  {  upsESystemOutputEntry  3  }


	upsESystemOutputCurrent	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured output mandatory from the UPS meters in 0.1 amps."
		::=  {  upsESystemOutputEntry  4  }


	upsESystemOutputWatts	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured output real power in watts."
		::=  {  upsESystemOutputEntry  5  }

	upsESystemOutputVA	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured output real complex power in VA."
		::=  {  upsESystemOutputEntry  6  }


	upsESystemOutputLoad	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The UPS output load in percent of rated capacity."
		::=  {  upsESystemOutputEntry  7  }

	upsESystemBypassNumPhase	OBJECT-TYPE	
		SYNTAX			PositiveInteger ( 1 .. 3  ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The number of  bypass phases, serves as the table index.
                               This value indicate the device initialized feature"
		::=  {  upsESystemSummary  19  }

	upsESystemBypassTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsSystemBypassEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	    "A list of bypass table entries. The number of entries is given by the
                            value of upsESystemBypassNumPhase."
		::=  { upsESystemSummary  20 }


	upsESystemBypassEntry	OBJECT-TYPE
		SYNTAX		UpsSystemBypassEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION 	"An entry containing information applicable to a particular line."
		INDEX		{  upsESystemBypassPhase  }
		::=  { upsESystemBypassTable 1 }

	UpsSystemBypassEntry  ::=  SEQUENCE {
		upsESystemBypassPhase  PositiveInteger,
		upsESystemBypassFrequency  NonNegativeInteger,
		upsESystemBypassVoltage  NonNegativeInteger,
		upsESystemBypassCurrent  NonNegativeInteger,
		upsESystemBypassWatts  NonNegativeInteger
		}


	upsESystemBypassPhase	OBJECT-TYPE	
		SYNTAX			PositiveInteger ( 1 .. 3  ) 
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The number of the phase. Serves as index for bypass table"
		::=  {  upsESystemBypassEntry  1  }


	upsESystemBypassFrequency	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured bypass frequency from the UPS meters in 0.1 Hz."
		::=  {  upsESystemBypassEntry  2  }


	upsESystemBypassVoltage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured bypass voltage from the UPS meters in 0.1 volts"
		::=  {  upsESystemBypassEntry  3  }


	upsESystemBypassCurrent	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured bypass mandatory from the UPS meters in 0.1 amps"
		::=  {  upsESystemBypassEntry  4  }


	upsESystemBypassWatts	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured input real power in watts."
		::=  {  upsESystemBypassEntry  5  }


	upsESystemConfigBelowCapacityLimit	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger   
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The UPS batteries capacity(%) limit for shutdown"
		::=  {  upsESystemSummary  21  }

	upsESystemConfigBelowRemainTimeLimit	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger   
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The UPS batteries backup time(minute) limit for shutdown"
		::=  {  upsESystemSummary  22  }

--========================================================================
--upsEBatterySystem
--========================================================================

	upsEBatteryStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { unknown ( 1 ) , batteryNormal ( 2 ) , batteryLow ( 3 ) , 
                                               batteryDepleted ( 4 ) , batteryDischarging ( 5 ) , batteryFailure ( 6 ) } 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		" The status of UPS battery, a value of batteryLow indicates
                                that the battery-low status bit has been set from device. 
                                A value of batteryDepleted indicates that the UPS will be 
                                unable to sustain the present load when and if the utility 
                                power is lost (including the possibility that the  utility 
                                power is mandatoryly absent and the UPS is unable to sustain
                                the output)"
		::=  {  upsEBatterySystem  1  }

	upsESecondsOnBattery	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"If the unit is on battery power, the elapsed time
                                   since the UPS last switched to battery power, or the
                                   time since the network management subsystem was last
                                   restarted, whichever is less. 0 shall be returned
                                   if the unit is not on battery power"
		::=  {  upsEBatterySystem  2  }

	upsEBatteryEstimatedMinutesRemaining	OBJECT-TYPE	
		SYNTAX			PositiveInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"An estimate of the time to battery charge depletion
                                   under the present load conditions if the utility power
                                   is off and remains off, or if it were to be lost and
                                   remain off."
		::=  {  upsEBatterySystem  3  }

	upsEBatteryEstimatedChargeRemaining	OBJECT-TYPE	
		SYNTAX			Integer32  ( 0 .. 100  ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"An estimate of the battery charge remaining expressed
                                   as a percent of full charge"
		::=  {  upsEBatterySystem  4  }

	upsEPositiveBatteryVoltage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the present positive battery voltage in 0.1 Volt DC"
		::=  {  upsEBatterySystem  5  }

	upsENegativeBatteryVoltage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the present negative battery voltage in 0.1 Volt DC"
		::=  {  upsEBatterySystem  6  }

	upsEBatteryCellNumber	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"This object indicate the cell number of each set."
		::=  {  upsEBatterySystem  7  }

	upsEBatteryTemperature	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The ambient temperature at or near the UPS Battery
                               casing in 0.1 degree."
		::=  {  upsEBatterySystem  8  }

	upsEBatteryLastReplacedDate	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 10 .. 10  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The date when the Batteries in this UPS were last replaced.
                               The format should be DD/MM/YYYY."
		::=  {  upsEBatterySystem  9  }
     
       upsEBatteryABMStatus          OBJECT-TYPE
            SYNTAX                  INTEGER { charge ( 1 ) , float ( 2 ) , rest ( 3 ) ,
                                              discharge ( 4 ) , disable ( 5 ) }
            ACCESS             read-only
		STATUS			mandatory
		DESCRIPTION		" The status of ABM."
		::=  {  upsEBatterySystem  10  }

	upsEChargerModulesNum	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger  ( 0 .. 32  ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The number of charger modules inserted to UPS systems. served 
                                   as the index of the upsEChargerModulesTable.
                                   The default value 0 indicate that the UPS system don't have 
                                   separate charger module."
		::=  {  upsEBatterySystem  11  }

	upsEChargerModulesTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsChargerModulesEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	"A list of charger modules entries. The number of entries is given 
                            by the value of upsEchargerModulesNum."
		::=  { upsEBatterySystem  12 }

	upsEChargerModulesEntry	OBJECT-TYPE
		SYNTAX		UpsChargerModulesEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	"An entry containing information applicable to a particular charger module."
		INDEX		{  chargerModulesNum  }
		::=  { upsEChargerModulesTable 1 }

	UpsChargerModulesEntry  ::=  SEQUENCE {
		chargerModulesNum  PositiveInteger,
		chargerModulesAddress  NonNegativeInteger  ,
		positiveChargeVotlage  NonNegativeInteger,
		negativeChargeVoltage  NonNegativeInteger,
		positiveChargeCurrent  NonNegativeInteger,
		negativeChargeCurrent  NonNegativeInteger,
		chargerModulesTemperature  INTEGER,
		chargerModulesMode  INTEGER
		}


	chargerModulesNum	OBJECT-TYPE	
		SYNTAX			PositiveInteger ( 1 .. 32  ) 
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The number of charger modules. Serves as index for charger module table"
		::=  {  upsEChargerModulesEntry  1  }


	chargerModulesAddress	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger  
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"Charger Modules' address."
		::=  {  upsEChargerModulesEntry  2  }


	positiveChargeVotlage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured positive charger voltage from the UPS meters in 0.1 volts"
		::=  {  upsEChargerModulesEntry  3  }


	negativeChargeVoltage	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured nepositive charger voltage from the UPS meters in 0.1 volts"
		::=  {  upsEChargerModulesEntry  4  }


	positiveChargeCurrent	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured positive charger mandatory from the UPS meters in in 0.1 amps."
		::=  {  upsEChargerModulesEntry  5  }


	negativeChargeCurrent	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured nepositive charger mandatory from the UPS meters in 0.1 amps."
		::=  {  upsEChargerModulesEntry  6  }


	chargerModulesTemperature	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured charger temperature from the UPS meters in 0.1 degree."
		::=  {  upsEChargerModulesEntry  7  }


	chargerModulesMode	OBJECT-TYPE	
		SYNTAX			INTEGER  { powerOn ( 1 ) , standyby ( 2 ) , fault ( 3 ) , shutdown ( 4 ) , 
                                               running ( 5 ) , suicide ( 6 ) , unknown ( 7 ) } 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The working mode of charger modules."
		::=  {  upsEChargerModulesEntry  8  }

--========================================================================
--upsEPowerConverterSystem
--========================================================================

	upsEUPSModulesNum	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger ( 0 .. 32  ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The number of UPS modules inserted to UPS systems. 
                                   served as the index of the upsEModulesTable.
                                   the default value 0 indicate that the UPS system do not
                                   have separate UPS module."
		::=  {  upsEPowerConverterSystem  1  }

	upsEModulesTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsModulesEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	   "A list of UPS modules entries. The number of entries is 
                            given by the value of upsEModulesNum."
		::=  { upsEPowerConverterSystem  2 }

	upsEModulesEntry	OBJECT-TYPE
		SYNTAX		UpsModulesEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	 "An entry containing information applicable to a particular upsE module."
		INDEX		{  upsEModulesNum  }
		::=  { upsEModulesTable 1 }

	UpsModulesEntry  ::=  SEQUENCE {
		upsEModulesNum  PositiveInteger,
		upsEModuleAddress  INTEGER,
		upsEModulePositiveBusVolt  NonNegativeInteger,
		upsEModuleNegativeBusVolt  NonNegativeInteger,
		upsEModuleTemperature  INTEGER,
		upsEModuleWorkingMode  INTEGER,
		upsEModuleOutputCurrentR  NonNegativeInteger,
		upsEModuleOutputWattR  NonNegativeInteger,
		upsEModuleOutputLoadR  INTEGER,
		upsEModuleWarningCode DisplayString,
		upsEModuleFaultCode DisplayString,

		upsEModuleTrapState DisplayString,
		upsEModuleConfigOutputVA  NonNegativeInteger,
		upsEModuleOutputCurrentS  NonNegativeInteger,
		upsEModuleOutputCurrentT  NonNegativeInteger,
		upsEModuleOutputWattS  NonNegativeInteger,
		upsEModuleOutputWattT  NonNegativeInteger,
		upsEModuleOutputLoadS  INTEGER,
		upsEModuleOutputLoadT  INTEGER,
		upsEModuleOutputVAR  NonNegativeInteger,
		upsEModuleOutputVAS  NonNegativeInteger,
		upsEModuleOutputVAT  NonNegativeInteger
		}


	upsEModulesNum	OBJECT-TYPE	
		SYNTAX			PositiveInteger  ( 1 .. 32  ) 
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The number of UPS modules. Serves as index for UPS module table"
		::=  {  upsEModulesEntry  1  }


	upsEModuleAddress	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"the address of UPS modules."
		::=  {  upsEModulesEntry  2  }


	upsEModulePositiveBusVolt	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger  
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured positive upsE module voltage from the UPS meters in 0.1 volts"
		::=  {  upsEModulesEntry  3  }


	upsEModuleNegativeBusVolt	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured nepositive upsE module voltage from the UPS meters in 0.1 volts"
		::=  {  upsEModulesEntry  4  }


	upsEModuleTemperature	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured  upsE module temperature from the UPS meters in 0.1 degree."
		::=  {  upsEModulesEntry  5  }


	upsEModuleWorkingMode	OBJECT-TYPE	
		SYNTAX			INTEGER  {power-on ( 1 ) , stand-by( 2 ) , by-pass ( 3 ) ,
                                                line( 4 ) , battery ( 5 ) , battery-test ( 6 ) , fault ( 7 ) ,
                                               converter ( 8  ) , eco ( 9 ) , shutdown ( 10 ) , on-booster ( 11 ) , on-reducer ( 12 ) , other( 13 )  } 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The working mode of UPS modules."
		::=  {  upsEModulesEntry  6  }


	upsEModuleOutputCurrentR	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured  upsE module output mandatory from the UPS meters in 0.1 A."
		::=  {  upsEModulesEntry  7  }


	upsEModuleOutputWattR	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured  upsE module output watts from the UPS meters in watts."
		::=  {  upsEModulesEntry  8  }


	upsEModuleOutputLoadR	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The output load of UPS modules in %."
		::=  {  upsEModulesEntry  9  }

       upsEModuleWarningCode	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 15 ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The warning code of ups modules.Please refer the warning table of 'QU,XX' for details."
		::=  {  upsEModulesEntry  10 }

       upsEModuleFaultCode	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 15 ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The fault code of ups modules.Please refer command 'QU,XX' for details."
		::=  {  upsEModulesEntry  11 }

	upsEModuleTrapState	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 127  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"the values indicate the unrestored traps.
					 For example, after AC fail, so the value of upsETrapState should be '1'. 
					 And then the AC restore, the value of upsEModuleTrapState 
					 should change to empty."
		::=  {  upsEModulesEntry  12  }


	upsEModuleConfigOutputVA	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the nominal Volt-Amp rating presented in VA."
		::=  {  upsEModulesEntry  13  }


	upsEModuleOutputCurrentS	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured  upsE module output mandatory from the UPS meters in 0.1 A."
		::=  {  upsEModulesEntry  14  }

	upsEModuleOutputCurrentT	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured  upsE module output mandatory from the UPS meters in 0.1 A."
		::=  {  upsEModulesEntry  15  }

	upsEModuleOutputWattS	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured  upsE module output watts from the UPS meters in watts."
		::=  {  upsEModulesEntry  16  }

	upsEModuleOutputWattT	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measured  upsE module output watts from the UPS meters in watts."
		::=  {  upsEModulesEntry  17  }

	upsEModuleOutputLoadS	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The output load of UPS modules in %."
		::=  {  upsEModulesEntry  18  }

	upsEModuleOutputLoadT	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The output load of UPS modules in %."
		::=  {  upsEModulesEntry  19  }

	upsEModuleOutputVAR	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the nominal Volt-Amp rating presented in VA."
		::=  {  upsEModulesEntry  20  }

	upsEModuleOutputVAS	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the nominal Volt-Amp rating presented in VA."
		::=  {  upsEModulesEntry  21  }

	upsEModuleOutputVAT	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The magnitude of the nominal Volt-Amp rating presented in VA."
		::=  {  upsEModulesEntry  22  }

--========================================================================
--upsELoadSegment          
--========================================================================
	upsELoadSegment1OffDelay 	OBJECT-TYPE
		-- Valid value is from -1 to 32767
		SYNTAX			INTEGER
		ACCESS			read-write
		STATUS			mandatory
		DESCRIPTION		"Setting this object will shutdown the UPS Load Segment output after the indicated number of seconds, or less. 
					 Setting this object to 0 will cause the shutdown to occur immediately.  Setting this object to -1 will 
					 abort the countdown. Read this object will get countdown value of the Load Segment."
		::=  {  upsELoadSegment  1  }
  	
	upsELoadSegment1OnDelay		OBJECT-TYPE
		-- Valid value is from -1 to 32767
		SYNTAX			INTEGER
		ACCESS			read-write
		STATUS			mandatory
		DESCRIPTION		"Setting this object will start the Load segment output after the indicated number of seconds, 
					 including starting the UPS, if necessary.  Setting this object to 0 will cause the startup 
					 to occur immediately.  Setting this object to -1 will abort the countdown."
		::=  {  upsELoadSegment  2  }

	upsELoadSegment1AutoOffTimer	OBJECT-TYPE
		-- Valid value is from -1 to 32767
		SYNTAX			INTEGER
		ACCESS			read-write
		STATUS			mandatory
		DESCRIPTION		"The load segment turns automatically off after the delay while the unit operates on battery, 
					 but the shutdown is cancelled if the utility return before the delay has expired." 
		::=  {  upsELoadSegment  3  }

	upsELoadSegment1AutoOnTimer	OBJECT-TYPE
		-- Valid value is from -1 to 32767
		SYNTAX			INTEGER
		ACCESS			read-write
		STATUS			mandatory
		DESCRIPTION		"The load segment is automatically turned on after a selected delay 
					 if it has been shutdown due to on battery."
		::=  {  upsELoadSegment  4  }

	upsELoadSegment1State		OBJECT-TYPE
		SYNTAX			INTEGER  { off(1), on(2), off-pending(3), on-pending(4), not-support(5) } 
		ACCESS			read-only
		STATUS			mandatory
		DESCRIPTION		"Load segment output state."
		::=  {  upsELoadSegment  5  }

	upsELoadSegment2OffDelay 	OBJECT-TYPE
		-- Valid value is from -1 to 32767
		SYNTAX			INTEGER
		ACCESS			read-write
		STATUS			mandatory
		DESCRIPTION		"Setting this object will shutdown the UPS Load Segment output after the indicated number of seconds, or less. 
					 Setting this object to 0 will cause the shutdown to occur immediately.  Setting this object to -1 will 
					 abort the countdown. Read this object will get countdown value of the Load Segment."
		::=  {  upsELoadSegment  6  }
  	
	upsELoadSegment2OnDelay		OBJECT-TYPE
		-- Valid value is from -1 to 32767
		SYNTAX			INTEGER
		ACCESS			read-write
		STATUS			mandatory
		DESCRIPTION		"Setting this object will start the Load segment output after the indicated number of seconds, 
					 including starting the UPS, if necessary.  Setting this object to 0 will cause the startup 
					 to occur immediately.  Setting this object to -1 will abort the countdown."
		::=  {  upsELoadSegment  7  }

	upsELoadSegment2AutoOffTimer	OBJECT-TYPE
		-- Valid value is from -1 to 32767
		SYNTAX			INTEGER
		ACCESS			read-write
		STATUS			mandatory
		DESCRIPTION		"The load segment turns automatically off after the delay while the unit operates on battery, 
					 but the shutdown is cancelled if the utility return before the delay has expired." 
		::=  {  upsELoadSegment  8  }

	upsELoadSegment2AutoOnTimer	OBJECT-TYPE
		-- Valid value is from -1 to 32767
		SYNTAX			INTEGER
		ACCESS			read-write
		STATUS			mandatory
		DESCRIPTION		"The load segment is automatically turned on after a selected delay 
					 if it has been shutdown due to on battery."
		::=  {  upsELoadSegment  9  }

	upsELoadSegment2State		OBJECT-TYPE
		SYNTAX			INTEGER  { off(1), on(2), off-pending(3), on-pending(4), not-support(5) } 
		ACCESS			read-only
		STATUS			mandatory
		DESCRIPTION		"Load segment output state."
		::=  {  upsELoadSegment  10  }

--========================================================================
--upsEEnvironment
--========================================================================

	upsEEnvironmentTemperature	OBJECT IDENTIFIER ::= { upsEEnvironment 1 }

	upsEEnvironmentCurrentTemperature	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measurement of  temperature sensor, in 0.1 degree"
		::=  {  upsEEnvironmentTemperature  1  }

	upsEEnvironmentTemperatureHighSetPoint	OBJECT-TYPE	
		SYNTAX			INTEGER 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The set point for high temperature warning, in 0.1 degrees. 
					This value must be greater than upsEEnvironmentTemperatureLowSetPoint,
					and the least significant digit must be zero."
		::=  {  upsEEnvironmentTemperature  2  }

	upsEEnvironmentTemperatureHighStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"To enable/disable high set point check with sensor temperature."
		::=  {  upsEEnvironmentTemperature  3  }

	upsEEnvironmentTemperatureLowSetPoint	OBJECT-TYPE	
		SYNTAX			INTEGER  
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The set point for low temperature warning, in 0.1 degrees.
					This value must be less than upsEEnvironmentTemperatureHighSetPoint,
					and the least significant digit must be zero."
		::=  {  upsEEnvironmentTemperature  4  }

	upsEEnvironmentTemperatureLowStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"To enable/disable low set point check with sensor temperature."
		::=  {  upsEEnvironmentTemperature  5  }

	upsEEnvironmentTemperatureOffset	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The offset to calibrate temperature of EMD, in 0.1 degrees"
		::=  {  upsEEnvironmentTemperature  6  }

	upsEEnvironmentHumidity	        OBJECT IDENTIFIER ::= { upsEEnvironment 2 }

	upsEEnvironmentCurrentHumidity	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The measurement of sensor humidity present in %."
		::=  {  upsEEnvironmentHumidity  1  }

	upsEEnvironmentHumidityHighSetPoint	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The set point for high humidity warning, in %.
					This value must be greater than upsEEnvironmentHumidityLowSetPoint."
		::=  {  upsEEnvironmentHumidity  2  }

	upsEEnvironmentHumidityHighStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"To enable/disable high set point check with emd humidity."
		::=  {  upsEEnvironmentHumidity  3  }

	upsEEnvironmentHumidityLowSetPoint	OBJECT-TYPE	
		SYNTAX			INTEGER
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The set point for low humidity warning, in %.
					This value must be less than upsEEnvironmentHumidityHighSetPoint."
		::=  {  upsEEnvironmentHumidity  4  }

	upsEEnvironmentHumidityLowStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"To enable/disable high set point check with emd humidity."
		::=  {  upsEEnvironmentHumidity  5  }

	upsEEnvironmentHumidityOffset	OBJECT-TYPE	
		SYNTAX			INTEGER  
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The offset to calibrate humidity of EMD, in %."
		::=  {  upsEEnvironmentHumidity  6  }

	upsEEnvironmentContactsNum	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The number of environment contacts, serves as the table index."
		::=  {  upsEEnvironment  3  }

	upsEEnvironmentContactTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsEEnvironmentContactEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	      "A list of contacts table entries. The number of entries is given by the
                               value of upsEEnvironmentContactsNum"
		::=  { upsEEnvironment  4 }

	upsEEnvironmentContactEntry	OBJECT-TYPE
		SYNTAX		UpsEEnvironmentContactEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	     "An entry containing information applicable to a particular contact"
		INDEX		{  upsEEnvironmentContactIndex  }
		::=  { upsEEnvironmentContactTable 1 }

	UpsEEnvironmentContactEntry  ::=  SEQUENCE {
		upsEEnvironmentContactIndex  PositiveInteger,
		upsEEnvironmentContactType  INTEGER,
		upsEEnvironmentContactState  INTEGER,
		upsEEnvironmentContactDescription  DisplayString
		}


	upsEEnvironmentContactIndex	OBJECT-TYPE	
		SYNTAX			PositiveInteger
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The number of environment contacts. Serves as index for environment contact table"
		::=  {  upsEEnvironmentContactEntry  1  }


	upsEEnvironmentContactType	OBJECT-TYPE	
		SYNTAX			INTEGER  { normallyOpen ( 1 ) , normallyClosed ( 2 ) , notUsed ( 3 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"operation type"
		::=  {  upsEEnvironmentContactEntry  2  }


	upsEEnvironmentContactState	OBJECT-TYPE	
		SYNTAX			INTEGER  { open ( 1 ) , closed ( 2 ) , openWithNotice ( 3 ) , closedWithNotice ( 4 ) } 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The mandatory status."
		::=  {  upsEEnvironmentContactEntry  3  }


	upsEEnvironmentContactDescription	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 31 ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"Description of environment contact."
		::=  {  upsEEnvironmentContactEntry  4  }

--========================================================================
--upsEBatteryTest
--========================================================================

	upsEBatteryTestStart	OBJECT-TYPE	
		SYNTAX			INTEGER  { none ( 1 ) , batteryTest10Sec ( 2 ) , batteryTestUntilLow ( 3 ) , 
                                               batteryTestWithTime ( 4 ) , cancelBatteryTest ( 5 ) , clearBatteryInfo ( 6 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"This object specify the battery test type and initiate battery test. 
                               If battTestWithTime selected, the test  time is refer to upsEBatteryTestSettingTime."
		::=  {  upsEBatteryTest  1  }

	upsEBatteryTestSettingTime	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger  
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The object specify the test time for battery test in seconds."
		::=  {  upsEBatteryTest  2  }

	upsEBatteryTestResult	OBJECT-TYPE	
		SYNTAX			INTEGER  { idle ( 1 ) , processing ( 2 ) , noFailure ( 3 ) , 
                                               failureOrWarning ( 4 ) , notPossible ( 5 ) , testCancel ( 6 ) } 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"This object indicate the test result of battery."
		::=  {  upsEBatteryTest  3  }

	upsEBatteryTestStartTime	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 19 .. 19  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The value of the time the test in progress was initiated,
         				  or, if no test is in progress, the time the previous test
         				 was initiated. If the value of upsETestBatteryTestResult
        				  is noTestsInitiated(6), upsETestStartTime has the value
        				  01/01/1970 00:00:00."
		::=  {  upsEBatteryTest  4  }

         upsEBatteryTestElapsedTime     OBJECT-TYPE
		SYNTAX			DisplayString  ( SIZE ( 11 .. 11  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"The amount of time in format hh:mm:ss, since the test in progress 
                                         was initiated, or, if no test is in progress, the previous 
                                         test took to complete. If the value of upsTestResultsSummary 
                                         is idle(1), upsTestElapsedTime has the value 00:00:00."
		::=  {  upsEBatteryTest  5  }
               

	upsEBatteryTestScheduleTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsBatteryTestScheduleEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	     "This table describes the schedule for automatically battery
                              test."
		::=  { upsEBatteryTest  6 }

	upsEBatteryTestScheduleEntry	OBJECT-TYPE
		SYNTAX		UpsBatteryTestScheduleEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	      "An entry containing information applicable to schedule test."
		INDEX		{  upsEBatteryTestScheduleIndex  }
		::=  { upsEBatteryTestScheduleTable 1 }

	UpsBatteryTestScheduleEntry  ::=  SEQUENCE {
		upsEBatteryTestScheduleIndex  PositiveInteger,
		upsEBatteryTestScheduleDay  INTEGER,
		upsEBatteryTestScheduleTime  DisplayString,
		upsEBatteryTestScheduleType  INTEGER,
		upsEBatteryTestScheduleTestWithTime  NonNegativeInteger,
		upsEBatteryTestScheduleSpecialDay  DisplayString
		}


	upsEBatteryTestScheduleIndex	OBJECT-TYPE	
		SYNTAX			PositiveInteger
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The index of battery test scheduled."
		::=  {  upsEBatteryTestScheduleEntry  1  }


	upsEBatteryTestScheduleDay	OBJECT-TYPE	
		SYNTAX			INTEGER  { monday ( 1 ) , tuesday ( 2 ) , wednsday ( 3 ) ,
 							     thusday ( 4 ) , friday ( 5 ) , saturday ( 6 ) , 
                                               sunday ( 7 ) , specialday ( 8 ) , none ( 9 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The weekday or specaial day on which the UPS should start battery test."
		::=  {  upsEBatteryTestScheduleEntry  2  }


	upsEBatteryTestScheduleTime	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 5  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The time that the battery test will be initiated in hh:mm format."
		::=  {  upsEBatteryTestScheduleEntry  3  }


	upsEBatteryTestScheduleType	OBJECT-TYPE	
		SYNTAX			INTEGER  { none ( 1 ) , batteryTest10sec ( 2 ) , batteryTestUntilLow ( 3 ) , 
                                               batteryTestWithTime ( 4 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The type of battery test."
		::=  {  upsEBatteryTestScheduleEntry  5  }


	upsEBatteryTestScheduleTestWithTime	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The battery time of setting time test in seconds."
		::=  {  upsEBatteryTestScheduleEntry  6  }


	upsEBatteryTestScheduleSpecialDay	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 10  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The special day that the battery test will be initiated in dd/mm/yyyy format."
		::=  {  upsEBatteryTestScheduleEntry  7  }

--========================================================================
-- upsEControl  
--========================================================================

	upsEControlOutputOffDelay	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger   
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"Setting this value to other than zero will cause the UPS 
                               output to turn off after the number of seconds. "
		::=  {  upsEControl  1  }

	upsEControlOutputOnDelay	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger  
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"Setting this value to other than zero will cause the 
					UPS output to turn on after the number of seconds. "
		::=  {  upsEControl  2  }

	upsEControlOutputOnOffControl	OBJECT-TYPE	
		SYNTAX			INTEGER  { upsEOutputOff ( 1 ) , upsEOutputOffCancel ( 2 ) , upsESleep( 3 ) , none ( 4 )  }
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"upsEOutputOff ( 1 ) indicates the shutdown sequence,
	                                 upsEOutputOffCancel ( 2 ) indicates cancel the shutdown sequence,
        	                         upsESleep( 3 ) indicates shutdown UPS first, then switch on."
		::=  {  upsEControl  3  }

	upsEShutdownEventsTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsShutdownEventsEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	     "This table describes the parametes for shutdown process
                              when shutdown event occurs"
		::=  { upsEControl  4 }

	upsEShutdownEventsEntry	OBJECT-TYPE
		SYNTAX		UpsShutdownEventsEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	      "An entry containing information applicable to a particular shutdown
                               event line"
		INDEX		{  upsEShutdownEvent  }
		::=  { upsEShutdownEventsTable 1 }

	UpsShutdownEventsEntry  ::=  SEQUENCE {
		upsEShutdownEvent  INTEGER,
		upsEShutdownEventAction  INTEGER,
		upsEShutdownwarningPeriodTime  NonNegativeInteger,
		upsEShutdownWarningPeriodInterval  NonNegativeInteger
		}


	upsEShutdownEvent	OBJECT-TYPE	
		SYNTAX			INTEGER  { acFail ( 1 ) , batteryLow ( 2 ) , upsEOverLoad ( 3 ) ,
                                               upsEOverTemperature ( 4 ) , upsEWeeklySchedule ( 5 ) , 
                                               upsESpecialSchedule ( 6 ) , environmentTemperatureOverThreshold ( 7 ) ,
                                               environmentHumidityOverThreshold ( 8 ) , environmentContact1Alarm ( 9 ) ,
                                               environmentContact2Alarm ( 10 ), belowCapacityLimit( 11 ), belowRemainTimeLimit( 12 )} 
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The shutdown event identification"
		::=  {  upsEShutdownEventsEntry  1  }


	upsEShutdownEventAction	OBJECT-TYPE	
		SYNTAX			INTEGER  { disable ( 1 ) , warning ( 2 ) , shutdownClient ( 3 ) , shutdownUPS ( 4 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"Status of the corresponding shutdown Event.
 					When set to disable(), shutdown process will not start when
				      corresponding event occured."
		::=  {  upsEShutdownEventsEntry  2  }


	upsEShutdownwarningPeriodTime	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The Delay in seconds after the occurance of the curresponding shutdown
                                    event, and warning message should be popped in this period."
		::=  {  upsEShutdownEventsEntry  3  }


	upsEShutdownWarningPeriodInterval	OBJECT-TYPE	
		SYNTAX			NonNegativeInteger
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The frequency of sending warning messages to the connected
                                   clients when the curresponding shutdown event occurs.
                                   The value is in units of seconds."
		::=  {  upsEShutdownEventsEntry  4  }

	upsEControlWeeklyScheduleTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsControlWeeklyScheduleEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	     "The table to schedule shutting down the ups by weekly"
		::=  { upsEControl  5 }

	upsEControlWeeklyScheduleEntry	OBJECT-TYPE
		SYNTAX		UpsControlWeeklyScheduleEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	      "An entry containing information applicable to a particular line"
		INDEX		{  upsEControlWeeklyScheduleIndex  }
		::=  { upsEControlWeeklyScheduleTable 1 }

	UpsControlWeeklyScheduleEntry  ::=  SEQUENCE {
		upsEControlWeeklyScheduleIndex  PositiveInteger,
		upsEWeeklyScheduleShutdownDay  INTEGER,
		upsEWeeklyScheduleShutdownTime  DisplayString,
		upsEWeeklyScheduleRestartDay  INTEGER,
		upsEWeeklyScheduleRestartTime  DisplayString
		}


	upsEControlWeeklyScheduleIndex	OBJECT-TYPE	
		SYNTAX			PositiveInteger
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"the index of schedule events."
		::=  {  upsEControlWeeklyScheduleEntry  1  }


	upsEWeeklyScheduleShutdownDay	OBJECT-TYPE	
		SYNTAX			INTEGER  { monday ( 1 ) , tuesday ( 2 ) , wednesday ( 3 ) , 
                                               thursday ( 4 ) , friday ( 5 ) , saturday ( 6 ) , 
                                               sunday ( 7 ) , none ( 8 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"the weekday on which upsE shoud shutdown"
		::=  {  upsEControlWeeklyScheduleEntry  2  }


	upsEWeeklyScheduleShutdownTime	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 5  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The time that the process of shutting down the UPS will be initiated
 					in hh:mm format."
		::=  {  upsEControlWeeklyScheduleEntry  3  }


	upsEWeeklyScheduleRestartDay	OBJECT-TYPE	
		SYNTAX			INTEGER  { monday ( 1 ) , tuesday ( 2 ) , wednesday ( 3 ) , 
                                               thursday ( 4 ) , friday ( 5 ) , saturday ( 6 ) , 
                                               sunday ( 7 ) , none ( 8 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"the weekday on which the UPS should restart."
		::=  {  upsEControlWeeklyScheduleEntry  4  }


	upsEWeeklyScheduleRestartTime	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 5 .. 5 ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The time the UPS will restart in hh:mm format."
		::=  {  upsEControlWeeklyScheduleEntry  5  }

      upsEControlSpecialDayScheduleTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsControlSpecialDayScheduleEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	     "The table to schedule shutting down the ups."
		::=  { upsEControl  6 }

	upsEControlSpecialDayScheduleEntry	OBJECT-TYPE
		SYNTAX		UpsControlSpecialDayScheduleEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	      "An entry containing information applicable to a particular line."
		INDEX		{  upsEControlSpecialDayScheduleIndex  }
		::=  { upsEControlSpecialDayScheduleTable 1 }

	UpsControlSpecialDayScheduleEntry  ::=  SEQUENCE {
		upsEControlSpecialDayScheduleIndex  PositiveInteger,
		upsESpecialDayScheduleShutdownDay  DisplayString,
		upsESpecialDayScheduleShutdownTime  DisplayString,
		upsESpecialDayScheduleRestartDay  DisplayString,
		upsESpecialDayScheduleRestartTime  DisplayString
		}


	upsEControlSpecialDayScheduleIndex	OBJECT-TYPE	
		SYNTAX			PositiveInteger
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The index of special day schedule."
		::=  {  upsEControlSpecialDayScheduleEntry  1  }


	upsESpecialDayScheduleShutdownDay	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 10 .. 10  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The special day on which UPS should shutdown with the format
                               of DD/MM/YYYY."
		::=  {  upsEControlSpecialDayScheduleEntry  2  }


	upsESpecialDayScheduleShutdownTime	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 5 .. 5 ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The time that the process of shutting down the UPS will be initiated
 					in hh:mm format."
		::=  {  upsEControlSpecialDayScheduleEntry  3  }


	upsESpecialDayScheduleRestartDay	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 10 .. 10  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The special day on which the UPS should restart with the format
                               of DD/MM/YYYY."
		::=  {  upsEControlSpecialDayScheduleEntry  4  }


	upsESpecialDayScheduleRestartTime	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 5 .. 5 ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The time the UPS will restart in hh:mm format."
		::=  {  upsEControlSpecialDayScheduleEntry  5  }

	upsESystemMasterOffDelay 	OBJECT-TYPE
		SYNTAX			INTEGER
		ACCESS			read-only
		STATUS			mandatory
		DESCRIPTION		"The UPS output will shutdown after the indicated number of seconds, -1 indicate no action."
		::=  {  upsEControl  7  }
	upsESystemMasterOnDelay 	OBJECT-TYPE
		SYNTAX			INTEGER
		ACCESS			read-only
		STATUS			mandatory
		DESCRIPTION		"The UPS output will start on after the indicated number of seconds, -1 indicate no action."
		::=  {  upsEControl  8  }

--========================================================================
-- upsETrapControl
--========================================================================

	upsETrapsReceiversTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  UpsTrapsReceiversEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	      " This table list the managers'IP to send traps to."
		::=  { upsETrapControl  1 }

	upsETrapsReceiversEntry	OBJECT-TYPE
		SYNTAX		UpsTrapsReceiversEntry
		ACCESS	not-accessible
		STATUS		mandatory
		DESCRIPTION	      "An entry containing information applicable to a particular input line."
		INDEX		{  upsETrapsReceiversIndex  }
		::=  { upsETrapsReceiversTable 1 }

	UpsTrapsReceiversEntry  ::=  SEQUENCE {
		upsETrapsReceiversIndex  PositiveInteger,
		upsETrapsReceiverAddress  DisplayString,
		upsETrapReceiverCommunityString  DisplayString,
		upsETrapType  INTEGER,
		upsETrapsSeverityLevel  INTEGER,
		upsETrapReceiverDescription  DisplayString
		}

	upsETrapsReceiversIndex	OBJECT-TYPE	
		SYNTAX			PositiveInteger
		ACCESS		not-accessible
		STATUS			mandatory
		DESCRIPTION		"The index to a trap receiver entry"
		::=  {  upsETrapsReceiversEntry  1  }

	upsETrapsReceiverAddress	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 45  ) )
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The IP address of the manager to send a trap to."
		::=  {  upsETrapsReceiversEntry  2  }

	upsETrapReceiverCommunityString	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 32  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The community name to use in the trap when
					 sent to the manager."
		::=  {  upsETrapsReceiversEntry  3  }

	upsETrapType	OBJECT-TYPE	
		SYNTAX			INTEGER  { none ( 1 ) , rfc1628Trap ( 2 ) , eppcTrap ( 3 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The type of trap to be received by the manager."
		::=  {  upsETrapsReceiversEntry  4  }

	upsETrapsSeverityLevel	OBJECT-TYPE	
		SYNTAX			INTEGER  { informational ( 1 ) , warning ( 2 ) , severe ( 3 ) } 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"The severity level of traps to be received by this manager."
		::=  {  upsETrapsReceiversEntry  5  }

	upsETrapReceiverDescription	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 63  ) ) 
		ACCESS		read-write
		STATUS			mandatory
		DESCRIPTION		"Description of trap receivers"
		::=  {  upsETrapsReceiversEntry  6  }

	upsETrapState	OBJECT-TYPE	
		SYNTAX			DisplayString  ( SIZE ( 0 .. 127  ) ) 
		ACCESS		read-only
		STATUS			mandatory
		DESCRIPTION		"the values indicate the unrestored traps.
					 For example, after AC fail, the agent send
					 the trap 1(AC Fail) and trap 7(battery on) to 
					 NMS. so the value of upsETrapState should be '1,7'. 
					And then the AC restore, the value of upsETrapState 
					should change to empty."
		::=  {  upsETrapControl  2  }

-- ===========================================================================
-- Trap defination
-- ===========================================================================

upsEPowerFail       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Utility power not available."
        ::= 1

upsEPowerRestored TRAP-TYPE
        ENTERPRISE upsETraps
        DESCRIPTION
                "INFORMATION: Utility power has restored."
        ::= 2

upsELowBattery TRAP-TYPE
        ENTERPRISE upsETraps
        DESCRIPTION
                "SEVERE: The UPS batteries are low and will soon be exhausted."
        ::= 3

upsEReturnFromLowBattery TRAP-TYPE
        ENTERPRISE upsETraps
        DESCRIPTION
                "INFORMATION: The UPS has return from a low battery condition."
        ::= 4

upsEFailed       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "SEVERE: The UPS is not working fine."
        ::= 5

upsEOk   TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: The UPS is working fine."
        ::= 6

upsEOnBattery TRAP-TYPE
        ENTERPRISE upsETraps
        VARIABLES {
        upsEBatteryEstimatedMinutesRemaining,
        upsESecondsOnBattery
        }
        DESCRIPTION
                "WARNING: The UPS has switched to battery backup power."
        ::= 7 

upsENotOnBattery TRAP-TYPE
        ENTERPRISE upsETraps
        DESCRIPTION
                "INFORMATION: The UPS is not on battery power."
        ::= 8

upsETestInProgress TRAP-TYPE
        ENTERPRISE upsETraps
        DESCRIPTION
                "INFORMATION: The testing is going on ups."
        ::= 9

upsETestOver TRAP-TYPE
        ENTERPRISE upsETraps
        VARIABLES {
        upsEBatteryTestStart,
        upsEBatteryTestSettingTime,
        upsEBatteryTestResult,
        upsEBatteryTestStartTime
        }
        DESCRIPTION
                "INFORMATION: The testing of UPS is completed."
        ::= 10

upsEBypassOn TRAP-TYPE
        ENTERPRISE upsETraps
        DESCRIPTION
                "INFORMATION: The UPS has enabled bypass."
        ::= 11

upsEOnline TRAP-TYPE
        ENTERPRISE upsETraps
                DESCRIPTION
                        "INFORMATION: The UPS is not on Bypass and return to normal status."
        ::= 12

upsECommunicationLost TRAP-TYPE
        ENTERPRISE upsETraps
        DESCRIPTION
                 "SEVERE: Communication to the UPS has been lost."
        ::= 13

upsECommunicationEstablished TRAP-TYPE
        ENTERPRISE upsETraps
        DESCRIPTION
                "INFORMATION: Communication with the UPS has been established."
        ::= 14

upsEGoingShutdown    TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: The UPS is going to shutdown output."
        ::= 15

upsEShutdownCancelled    TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: The UPS is not going to shutdown output."
        ::= 16

upsEOutlet1GoingShutdown   TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: The UPS is going to shutdown outlet1."
        ::= 17

upsEOutlet1ShutdownCancelled    TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: The UPS is not going to shutdown outlet1."
        ::= 18

upsEOutlet2GoingShutdown   TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: The UPS is going to shutdown outlet2."
        ::= 19

upsEOutlet2ShutdownCancelled    TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: The UPS is not going to shutdown outlet2."
        ::= 20

upsESleeping             TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEControlOutputOnDelay
        }
        DESCRIPTION
                "INFORMATION: UPS has entered sleep mode and power to load has been cut off."
        ::= 21

upsEWokeUp               TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: The UPS woke up from sleep mode and power to load has been restored."
        ::= 22

upsEOverTemperature   TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsESystemTemperature,
        upsESystemConfigOverTemperatureSetPoint
        }
        DESCRIPTION
                "WARNING: The UPS temperature is over the setting limit."
        ::= 23

upsENotOverTemperature   TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsESystemTemperature,
        upsESystemConfigOverTemperatureSetPoint
        }
        DESCRIPTION
                "INFORMATION: The UPS temperature is not over the setting limit."
        ::= 24

upsEOverLoad   TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsESystemOutputLoad,
        upsESystemConfigOutputLoadHighSetPoint
        }
        DESCRIPTION
                "WARNING: The UPS load is over the setting limit."
        ::= 25

upsENotOverLoad       TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsESystemOutputLoad,
        upsESystemConfigOutputLoadHighSetPoint
        }
        DESCRIPTION
                "INFORMATION: The UPS load is not over the setting limit."
        ::= 26

upsEModuleInserted   TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: UPS module or charger module plug-in."
        ::= 27

upsEModuleRemoved    TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: UPS module or charger module unplugs."
        ::= 28

sensorTemperatureTooHigh   TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentTemperatureHighSetPoint,
        upsEEnvironmentCurrentTemperature
        }
        DESCRIPTION
                "WARNING: Sensor Temperature over high Set point."
        ::= 29

sensorTemperatureNotHigh   TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentTemperatureHighSetPoint,
        upsEEnvironmentCurrentTemperature
        }
        DESCRIPTION
                "INFORMATION: Sensor Temperature not over high Set point."
        ::= 30

sensorTemperatureTooLow    TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentTemperatureLowSetPoint,
        upsEEnvironmentCurrentTemperature
        }
        DESCRIPTION
                "WARNING: Sensor Temperature under low Set point."
        ::= 31

sensorTemperatureNotLow    TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentTemperatureLowSetPoint,
        upsEEnvironmentCurrentTemperature
        }
        DESCRIPTION
                "INFORMATION: Sensor Temperature not under low Set point."
        ::= 32

sensorHumidityTooHigh      TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentHumidityHighSetPoint,
        upsEEnvironmentCurrentHumidity
        }
        DESCRIPTION
                "WARNING: Sensor Humidity over high Set point."
        ::= 33

sensorHumidityNotHigh      TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentHumidityHighSetPoint,
        upsEEnvironmentCurrentHumidity
        }
        DESCRIPTION
                "INFORMATION: Sensor Humidity not over high Set point."
        ::= 34

sensorHumidityTooLow       TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentHumidityLowSetPoint,
        upsEEnvironmentCurrentHumidity
        }
        DESCRIPTION
                "WARNING: Sensor Humidity under low Set point."
        ::= 35

sensorHumidityNotLow       TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentHumidityLowSetPoint,
        upsEEnvironmentCurrentHumidity
        }
        DESCRIPTION
                "INFORMATION: Sensor Humidity not under low Set point."
        ::= 36

contactAlarm1Active TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentContactType,
        upsEEnvironmentContactDescription
        }
        DESCRIPTION
                "WARNING: Contact Alarm-1 activated."
        ::= 37

concactAlarm1Normal TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentContactType,
        upsEEnvironmentContactDescription
        }
        DESCRIPTION
                "INFORMATION: Contact Alarm-1 not active."
        ::= 38

contactAlarm2Active TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentContactType,
        upsEEnvironmentContactDescription
        }
        DESCRIPTION
                "WARNING: Contact Alarm-2 activated."
        ::= 39

contactAlarm2Normal TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEEnvironmentContactType,
        upsEEnvironmentContactDescription
        }
        DESCRIPTION
                "INFORMATION: Contact Alarm-2 not active."
        ::= 40
        
upsEInternalwarning       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Internal warning."
        ::= 41           

upsEReturnFromInternalwarning       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Internal warning."
        ::= 42           

upsEEPOActive       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: EPO Active."
        ::= 43  

upsEReturnFromEPOActive       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from EPO Active."
        ::= 44   

upsEModuleUnlock       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Module Unlock."
        ::= 45   

upsEReturnFromModuleUnlock       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Module Unlock."
        ::= 46  
        
upsEMain1Neutralloss       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Main 1 Neutral loss."
        ::= 47     

upsEReturnFromMain1Neutralloss       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Main 1 Neutral loss."
        ::= 48  

upsEMain1phaseerror       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Main 1 phase error."
        ::= 49  

upsEReturnFromMain1phaseerror       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Main 1 phase error."
        ::= 50 

upsESitefault       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Site fault."
        ::= 51

upsEReturnFromSitefault       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Site fault."
        ::= 52

upsEBypassAbnormal       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Bypass Abnormal."
        ::= 53  

upsEReturnFromBypassAbnormal       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Bypass Abnormal."
        ::= 54 

upsEBypassPhaseError       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Bypass Phase Error."
        ::= 55           

upsEReturnFromBypassPhaseError       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Bypass Phase Error."
        ::= 56  

upsEBatteryOpen       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Battery Open."
        ::= 57   

upsEReturnFromBatteryOpen       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Battery Open."
        ::= 58  
        
upsEBatteryOverCharge       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Battery Over Charge."
        ::= 59   

upsEReturnFromBatteryOverCharge       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Battery Over Charge."
        ::= 60   
        
upsEBatteryReverse       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Battery Reverse."
        ::= 61      

upsEReturnFromBatteryReverse       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Battery Reverse."
        ::= 62

upsEOverloadforewarning       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Overload forewarning."
        ::= 63  

upsEReturnFromOverloadforewarning       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Overload forewarning."
        ::= 64   

upsEOverloadWarning       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Overload Warning."
        ::= 65  

upsEReturnFromOverloadWarning       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Overload Warning."
        ::= 66 

upsEFanLock       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Fan Lock."
        ::= 67  

upsEReturnFromFanLock       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Fan Lock."
        ::= 68 
        
upsEMaintaincoverisopen       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Maintain cover is open."
        ::= 69         

upsEReturnFromMaintaincoverisopen       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Maintain cover is open."
        ::= 70  

upsEChargerfault       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Charger fault."
        ::= 71  

upsEReturnFromChargerfault       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Charger fault."
        ::= 72

upsEModulelocationerror       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Module location error."
        ::= 73 

upsEReturnFromModulelocationerror       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Module location error."
        ::= 74  
        
upsETurnonabnormal       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Turn on abnormal."
        ::= 75  

upsEReturnFromTurnonabnormal       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Turn on abnormal."
        ::= 76  
      
upsERedundancyloss       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Redundancy loss."
        ::= 77     

upsEReturnFromRedundancyloss       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Redundancy loss."
        ::= 78 

upsEHotSwapActived       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Hot Swap Active."
        ::= 79  

upsEReturnFromHotSwapActived       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Hot Swap Active."
        ::= 80

upsEBatteryInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Battery Inform."
        ::= 81  

upsEReturnFromBatteryInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Battery Inform."
        ::= 82

upsEInspectionInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Inspection Inform."
        ::= 83

upsEReturnFromInspectionInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Inspection Inform."
        ::= 84  

upsEGuaranteeInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Guarantee Inform."
        ::= 85          

upsEReturnFromGuaranteeInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Guarantee Inform."
        ::= 86 

upsETemperatureLow       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Temperature Low."
        ::= 87  

upsEReturnFromTemperatureLow       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Temperature Low."
        ::= 88 

upsETemperatureHigh       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Temperature High."
        ::= 89  

upsEReturnFromTemperatureHigh       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Temperature High."
        ::= 90  
        
upsEBatteryOverTemperature       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Battery Over Temperature."
        ::= 91  

upsEReturnFromBatteryOverTemperature       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Battery Over Temperature."
        ::= 92
        
upsEFanMaintainInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Fan Maintain Inform."
        ::= 93    

upsEReturnFromFanMaintainInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Fan Maintain Inform."
        ::= 94   

upsEBusCapacitanceMaintainInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Bus Capacitance Maintain Inform."
        ::= 95  

upsEReturnFromBusCapacitanceMaintainInform       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from Bus Capacitance Maintain Inform."
        ::= 96

upsESystemOverCapacity       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: System Over Capacity."
        ::= 97  

upsEReturnFromSystemOverCapacity       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Return from System Over Capacity."
        ::= 98  

-- Trap Id 99-122 is not defined.

upsEBelowCapacityLimit       TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEBatteryEstimatedChargeRemaining,
        upsESystemConfigBelowCapacityLimit
        }
        DESCRIPTION
                "SEVERE: The UPS batteries capacity is lower than setting limit."
        ::= 123

upsENotBelowCapacityLimit       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: The UPS batteries capacity is not lower than setting limit."
        ::= 124

upsEBelowRemainTimeLimit       TRAP-TYPE
        ENTERPRISE      upsETraps
        VARIABLES {
        upsEBatteryEstimatedMinutesRemaining,
        upsESystemConfigBelowRemainTimeLimit
        }
        DESCRIPTION
                "SEVERE: The UPS batteries backup time is below the setting limit."
        ::= 125

upsENotBelowRemainTimeLimit       TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: The UPS batteries backup time is not below the setting limit."
        ::= 126

upsELoadSegment1Off	TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Load segment 1 is off."
        ::= 127
upsELoadSegment1On	TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Load segment 1 is on."
        ::= 128

upsELoadSegment2Off	TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "WARNING: Load segment 2 is off."
        ::= 129
upsELoadSegment2On	TRAP-TYPE
        ENTERPRISE      upsETraps
        DESCRIPTION
                "INFORMATION: Load segment 2 is on."
        ::= 130

END