path: root/MIBS/volius/VOLIUS-OR-MIB

VOLIUS-OR-MIB DEFINITIONS ::= BEGIN

IMPORTS
	NOTIFICATION-TYPE, OBJECT-TYPE, MODULE-IDENTITY, 
	enterprises, TimeTicks, Integer32
		FROM SNMPv2-SMI
	TEXTUAL-CONVENTION, TruthValue, MacAddress, 
	DateAndTime, DisplayString
		FROM SNMPv2-TC
	InetAddressIPv4
		FROM INET-ADDRESS-MIB;

vlsGlobalModule MODULE-IDENTITY
	LAST-UPDATED "201105311534Z"
	ORGANIZATION 
		"Volius"
	CONTACT-INFO 
		""
	DESCRIPTION 
		"This MIB describes all SNMP-enabled hardware produced by Volius,
		such as Fiber optical receivers, Erbium-doped fiber amplifiers,
		Optical switches, CATV optical transmitters."

	REVISION "201105311543Z"
	DESCRIPTION 
		"Initial version"
::= { volius 1 }


VlsDb ::= TEXTUAL-CONVENTION
	DISPLAY-HINT 	"d"
	STATUS     current
	DESCRIPTION 
		"This data type represents gain expressed in dB (no fractional part)."
	SYNTAX  Integer32


VlsEvent ::= TEXTUAL-CONVENTION
	STATUS     current
	DESCRIPTION 
		""
	SYNTAX  INTEGER {
		vlsEventBlinking (6),
		vlsEventFirmwareUpload (7),
		vlsEventStartUp (8),
		vlsEventPowerSw1 (27),
		vlsEventPowerSw2 (28)
	}


VlsInputSwitchMode ::= TEXTUAL-CONVENTION
	STATUS     current
	DESCRIPTION 
		""
	SYNTAX  INTEGER {
		vlsForce1 (1),
		vlsForce2 (2),
		vlsPrefer1 (3),
		vlsPrefer2 (4),
		vlsAutoLatching (5)
	}


VlsKiloHertz ::= TEXTUAL-CONVENTION
	DISPLAY-HINT 	"d"
	STATUS     current
	DESCRIPTION 
		"Data type representing frequency in units of kHz."
	SYNTAX  Integer32


VlsMilliVolt ::= TEXTUAL-CONVENTION
	STATUS     current
	DESCRIPTION 
		""
	SYNTAX  Integer32


VlsPowerSwitchMode ::= TEXTUAL-CONVENTION
	STATUS     current
	DESCRIPTION 
		""
	SYNTAX  INTEGER {
		vlsForce1 (1),
		vlsForce2 (2),
		vlsAuto (3)
	}


VlsTenthCelsius ::= TEXTUAL-CONVENTION
	DISPLAY-HINT 	"d-1"
	STATUS     current
	DESCRIPTION 
		"This data type represents temperature values that are normally
		expressed in degrees Celsius. Units are in tenths of a degree;
		for example, -5.1 degrees will be represented as -51."
	SYNTAX  Integer32


VlsTenthDb ::= TEXTUAL-CONVENTION
	DISPLAY-HINT 	"d-1"
	STATUS     current
	DESCRIPTION 
		"This data type represents power levels (or power gain)
		that are normally expressed in dBm (dB). Units are in tenths
		of a dBm (db);for example, -5.1 dB will be represented as -51"
	SYNTAX  Integer32


VlsTenthVolt ::= TEXTUAL-CONVENTION
	DISPLAY-HINT 	"d-1"
	STATUS     current
	DESCRIPTION 
		"This data type represents voltage levels that are normally
		expressed in volts. Units are in tenths of a volt;
		for example, 5.1 volts will be represented as 51."
	SYNTAX  Integer32


VlsTvChannelType ::= TEXTUAL-CONVENTION
	STATUS     current
	DESCRIPTION 
		""
	SYNTAX  INTEGER {
		vlsTvChannelSkip (1),
		vlsTvChannelAnalog (2),
		vlsTvChannelDigital (3),
		vlsTvChannelNoise (4)
	}

volius               OBJECT IDENTIFIER ::= { enterprises 34652 }
vlsSystem            OBJECT IDENTIFIER ::= { volius 2 }
vlsSystemGeneral     OBJECT IDENTIFIER ::= { vlsSystem 10 }
vlsNetworkServices   OBJECT IDENTIFIER ::= { vlsSystem 11 }
vlsNetworkAddress    OBJECT IDENTIFIER ::= { vlsNetworkServices 5 }
vlsHttp              OBJECT IDENTIFIER ::= { vlsNetworkServices 6 }
vlsSnmp              OBJECT IDENTIFIER ::= { vlsNetworkServices 7 }
vlsSntp              OBJECT IDENTIFIER ::= { vlsNetworkServices 8 }
vlsEventLog          OBJECT IDENTIFIER ::= { vlsSystem 13 }
vlsEdfa              OBJECT IDENTIFIER ::= { volius 3 }
vlsOpticalSwitch     OBJECT IDENTIFIER ::= { volius 4 }
vlsCatvTransmitter   OBJECT IDENTIFIER ::= { volius 5 }
vlsOpticalReceiver   OBJECT IDENTIFIER ::= { volius 6 }

vlsModelName  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Device model name"
	::= { vlsSystemGeneral 1 }

vlsSerialNumber  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Device serial number"
	::= { vlsSystemGeneral 2 }

vlsFirmwareVersion  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Main firmware version (monitoring PCB)"
	::= { vlsSystemGeneral 3 }

vlsDateAndTime  OBJECT-TYPE
	SYNTAX     DateAndTime
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Current date and time, only valid when SNTP time syncronization is operational"
	::= { vlsSystemGeneral 4 }

vlsTimeZone  OBJECT-TYPE
	SYNTAX     Integer32 (-720..780)
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Time zone expressed in minutes relative to UTC, used when reporting date and time, including event log"
	::= { vlsSystemGeneral 5 }

vlsCaseTemperature  OBJECT-TYPE
	SYNTAX     VlsTenthCelsius
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Case temperature"
	::= { vlsSystemGeneral 6 }

vlsSupplyVoltageTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF VlsSupplyVoltageEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsSystemGeneral 7 }

vlsSupplyVoltageEntry  OBJECT-TYPE
	SYNTAX 	VlsSupplyVoltageEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	INDEX { vlsSupplyVoltageIndex }
	::= { vlsSupplyVoltageTable 1 }

VlsSupplyVoltageEntry ::= SEQUENCE {
	vlsSupplyVoltageIndex
		Integer32,
	vlsSupplyVoltageNominal
		VlsMilliVolt,
	vlsSupplyVoltageActual
		VlsMilliVolt
}

vlsSupplyVoltageIndex  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Power supply input number (1..2)"
	::= { vlsSupplyVoltageEntry 1 }

vlsSupplyVoltageNominal  OBJECT-TYPE
	SYNTAX     VlsMilliVolt
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Nominal value of supply voltage"
	::= { vlsSupplyVoltageEntry 2 }

vlsSupplyVoltageActual  OBJECT-TYPE
	SYNTAX     VlsMilliVolt
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Actually measured value of supply voltage"
	::= { vlsSupplyVoltageEntry 3 }

vlsSupplySelectMode  OBJECT-TYPE
	SYNTAX     VlsPowerSwitchMode
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Mode of operation of power supply selection logic"
	::= { vlsSystemGeneral 8 }

vlsSupplySelectedInput  OBJECT-TYPE
	SYNTAX     Integer32 (1..2)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Currently selected power supply (1..2)"
	::= { vlsSystemGeneral 9 }

vlsBootLoaderVersion  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Version of the boot loader"
	::= { vlsSystemGeneral 10 }

vlsRfFwVer  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     obsolete
	DESCRIPTION 
		""
	::= { vlsSystemGeneral 11 }

vlsOperatingMinutes  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Total number of minutes in operation"
	::= { vlsSystemGeneral 12 }

vlsMonPcbRevision  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     obsolete
	DESCRIPTION 
		""
	::= { vlsSystemGeneral 14 }

vlsRfPcbRevision  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     obsolete
	DESCRIPTION 
		""
	::= { vlsSystemGeneral 15 }

vlsNumOpticalInputs  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Number of optical inputs (1 or 2)"
	::= { vlsSystemGeneral 16 }

vlsMacAddress  OBJECT-TYPE
	SYNTAX     MacAddress
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Device MAC address"
	::= { vlsNetworkAddress 1 }

vlsIpAddress  OBJECT-TYPE
	SYNTAX     InetAddressIPv4
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"IP address"
	::= { vlsNetworkAddress 2 }

vlsNetMask  OBJECT-TYPE
	SYNTAX     InetAddressIPv4
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Subnet mask"
	::= { vlsNetworkAddress 3 }

vlsDefaultGateway  OBJECT-TYPE
	SYNTAX     InetAddressIPv4
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Default gateway"
	::= { vlsNetworkAddress 4 }

vlsDhcp  OBJECT-TYPE
	SYNTAX     TruthValue
	MAX-ACCESS read-only
	STATUS     obsolete
	DESCRIPTION 
		""
	::= { vlsNetworkAddress 5 }

vlsHttpPassword  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     obsolete
	DESCRIPTION 
		""
	::= { vlsHttp 1 }

vlsHttpPasswordEnabled  OBJECT-TYPE
	SYNTAX     TruthValue
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Enable/disable web interface password protection"
	::= { vlsHttp 2 }

vlsHttpPort  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     deprecated
	DESCRIPTION 
		""
	::= { vlsHttp 3 }

vlsHttpEnabled  OBJECT-TYPE
	SYNTAX     TruthValue
	MAX-ACCESS read-only
	STATUS     deprecated
	DESCRIPTION 
		""
	::= { vlsHttp 4 }

vlsSnmpPort  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     deprecated
	DESCRIPTION 
		""
	::= { vlsSnmp 1 }

vlsTrapDestTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF VlsTrapDestEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsSnmp 2 }

vlsTrapDestEntry  OBJECT-TYPE
	SYNTAX 	VlsTrapDestEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	INDEX { vlsTrapDestIndex }
	::= { vlsTrapDestTable 1 }

VlsTrapDestEntry ::= SEQUENCE {
	vlsTrapDestIndex
		Integer32,
	vlsTrapDestAddr
		InetAddressIPv4,
	vlsTrapDestPort
		Integer32,
	vlsTrapDestEnable
		TruthValue
}

vlsTrapDestIndex  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"SNMP trap destination index (1..4)"
	::= { vlsTrapDestEntry 1 }

vlsTrapDestAddr  OBJECT-TYPE
	SYNTAX     InetAddressIPv4
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"SNMP trap destination IP address"
	::= { vlsTrapDestEntry 2 }

vlsTrapDestPort  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     deprecated
	DESCRIPTION 
		""
	::= { vlsTrapDestEntry 3 }

vlsTrapDestEnable  OBJECT-TYPE
	SYNTAX     TruthValue
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Enable/disable sending of SNMP traps to this destination"
	::= { vlsTrapDestEntry 4 }

vlsSntpServerAddr  OBJECT-TYPE
	SYNTAX     InetAddressIPv4
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"IP address of the SNTP server"
	::= { vlsSntp 1 }

vlsSntpServerPort  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     deprecated
	DESCRIPTION 
		""
	::= { vlsSntp 2 }

vlsSntpEnabled  OBJECT-TYPE
	SYNTAX     TruthValue
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Enable/disable time synchronization with an SNTP server"
	::= { vlsSntp 3 }

vlsLastEventCode  OBJECT-TYPE
	SYNTAX     VlsEvent
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Event code of the latest recorder event"
	::= { vlsEventLog 1 }

vlsLastEventIndex  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Sequence number of the latest recorded event"
	::= { vlsEventLog 2 }

vlsEventLogSize  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"The number of events currently recorded in the log"
	::= { vlsEventLog 3 }

vlsEventLogTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF VlsEventLogEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsEventLog 4 }

vlsEventLogEntry  OBJECT-TYPE
	SYNTAX 	VlsEventLogEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	INDEX { vlsEventIndex }
	::= { vlsEventLogTable 1 }

VlsEventLogEntry ::= SEQUENCE {
	vlsEventIndex
		Integer32,
	vlsEventCode
		VlsEvent,
	vlsEventTimeStamp
		TimeTicks,
	vlsEventDateTime
		DateAndTime,
	vlsEventMessage
		DisplayString
}

vlsEventIndex  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Sequence number of the event in the log entry"
	::= { vlsEventLogEntry 1 }

vlsEventCode  OBJECT-TYPE
	SYNTAX     VlsEvent
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Event code of the event in the log entry"
	::= { vlsEventLogEntry 2 }

vlsEventTimeStamp  OBJECT-TYPE
	SYNTAX     TimeTicks
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Up time when the event in the log entry was recorded"
	::= { vlsEventLogEntry 3 }

vlsEventDateTime  OBJECT-TYPE
	SYNTAX     DateAndTime
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Date and time when the event in the log entry was recorded. Only valid when SNTP time syncronization is operational."
	::= { vlsEventLogEntry 4 }

vlsEventMessage  OBJECT-TYPE
	SYNTAX     DisplayString
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Message string of the event in the log entry"
	::= { vlsEventLogEntry 5 }

vlsEventTrap  NOTIFICATION-TYPE
	OBJECTS { vlsLastEventCode }
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsEventLog 8 }

vlsReceiverInputTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF VlsReceiverInputEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsOpticalReceiver 1 }

vlsReceiverInputEntry  OBJECT-TYPE
	SYNTAX 	VlsReceiverInputEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	INDEX { vlsReceiverInputIndex }
	::= { vlsReceiverInputTable 1 }

VlsReceiverInputEntry ::= SEQUENCE {
	vlsReceiverInputIndex
		Integer32,
	vlsReceiverInputPower
		VlsTenthDb
}

vlsReceiverInputIndex  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Optical input number (1..2)"
	::= { vlsReceiverInputEntry 1 }

vlsReceiverInputPower  OBJECT-TYPE
	SYNTAX     VlsTenthDb
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Optical power at the input"
	::= { vlsReceiverInputEntry 2 }

vlsReceiverSelectedInput  OBJECT-TYPE
	SYNTAX     Integer32 (1..2)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Currently selected optical input"
	::= { vlsOpticalReceiver 2 }

vlsReceiverRfOutputPower  OBJECT-TYPE
	SYNTAX     VlsDb
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsOpticalReceiver 3 }

vlsReceiverSwitchMode  OBJECT-TYPE
	SYNTAX     VlsInputSwitchMode
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Mode of operation of optical input selection logic"
	::= { vlsOpticalReceiver 4 }

vlsReceiverInputLowThreshold  OBJECT-TYPE
	SYNTAX     VlsTenthDb
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The low threshold of optical input power for optical input selection logic"
	::= { vlsOpticalReceiver 5 }

vlsReceiverInputHighThreshold  OBJECT-TYPE
	SYNTAX     VlsTenthDb
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"The high threshold of optical input power for optical input selection logic"
	::= { vlsOpticalReceiver 6 }

vlsReceiverManualGain  OBJECT-TYPE
	SYNTAX     VlsTenthDb (-150..150)
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Gain setting when AGC is off"
	::= { vlsOpticalReceiver 7 }

vlsReceiverAgcOffset  OBJECT-TYPE
	SYNTAX     VlsTenthDb (-150..150)
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Gain offset when AGC is on"
	::= { vlsOpticalReceiver 9 }

vlsReceiverAgcState  OBJECT-TYPE
	SYNTAX     TruthValue
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Enable/disable AGC (automatic gain control)"
	::= { vlsOpticalReceiver 10 }

vlsReceiverCurrentGain  OBJECT-TYPE
	SYNTAX     VlsTenthDb (-150..150)
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		"Current gain of the optical receiver.
		This is adjusted automatically when AGC is on,
		or is fixed at vlsRecieverManualGain when AGC is off."
	::= { vlsOpticalReceiver 11 }

vlsReceiverEqualizer  OBJECT-TYPE
	SYNTAX     VlsTenthDb (0..150)
	MAX-ACCESS read-write
	STATUS     current
	DESCRIPTION 
		"Output spectrum tilt adjustment"
	::= { vlsOpticalReceiver 12 }

vlsReceiverSpectrumTable  OBJECT-TYPE
	SYNTAX SEQUENCE OF VlsReceiverSpectrumEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsOpticalReceiver 15 }

vlsReceiverSpectrumEntry  OBJECT-TYPE
	SYNTAX 	VlsReceiverSpectrumEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION 
		""
	INDEX { vlsReceiverSpectrumIndex }
	::= { vlsReceiverSpectrumTable 1 }

VlsReceiverSpectrumEntry ::= SEQUENCE {
	vlsReceiverSpectrumIndex
		Integer32,
	vlsCenterFrequency
		VlsKiloHertz,
	vlsChannelType
		VlsTvChannelType,
	vlsChannelLevel
		VlsTenthDb
}

vlsReceiverSpectrumIndex  OBJECT-TYPE
	SYNTAX     Integer32
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsReceiverSpectrumEntry 1 }

vlsCenterFrequency  OBJECT-TYPE
	SYNTAX     VlsKiloHertz
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsReceiverSpectrumEntry 2 }

vlsChannelType  OBJECT-TYPE
	SYNTAX     VlsTvChannelType
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsReceiverSpectrumEntry 3 }

vlsChannelLevel  OBJECT-TYPE
	SYNTAX     VlsTenthDb
	MAX-ACCESS read-only
	STATUS     current
	DESCRIPTION 
		""
	::= { vlsReceiverSpectrumEntry 4 }
END